Merge branch 'main' into rp2040_countio

1 files changed, 54 insertions, 16 deletions

diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot
index 7a9d0ce4b..2e31d5dfc 100644
--- a/locale/circuitpython.pot
+++ b/locale/circuitpython.pot
@@ -102,6 +102,7 @@ msgstr ""
 msgid "%q must be a tuple of length 2"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #: shared-bindings/canio/Match.c
 msgid "%q out of range"
 msgstr ""
@@ -332,6 +333,7 @@ msgid "All SPI peripherals are in use"
 msgstr ""
 
 #: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c
 msgid "All UART peripherals are in use"
 msgstr ""
 
@@ -453,6 +455,10 @@ msgstr ""
 msgid "Below minimum frame rate"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/audiobusio/I2SOut.c
+msgid "Bit clock and word select must be sequential pins"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Bit clock and word select must share a clock unit"
 msgstr ""
@@ -494,6 +500,10 @@ msgstr ""
 msgid "Buffer + offset too small %d %d %d"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Buffer elements must be 4 bytes long or less"
+msgstr ""
+
 #: shared-module/usb_hid/Device.c
 #, c-format
 msgid "Buffer incorrect size. Should be %d bytes."
@@ -943,6 +953,7 @@ msgid "Failed to acquire mutex, err 0x%04x"
 msgstr ""
 
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c
 msgid "Failed to allocate RX buffer"
 msgstr ""
 
@@ -1074,6 +1085,10 @@ msgstr ""
 msgid "IV must be %d bytes long"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "In-buffer elements must be <= 4 bytes long"
+msgstr ""
+
 #: py/persistentcode.c
 msgid ""
 "Incompatible .mpy file. Please update all .mpy files. See http://adafru.it/"
@@ -1088,6 +1103,14 @@ msgstr ""
 msgid "Init program size invalid"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Initial set pin direction conflicts with initial out pin direction"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Initial set pin state conflicts with initial out pin state"
+msgstr ""
+
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "Initialization failed due to lack of memory"
 msgstr ""
@@ -1198,7 +1221,8 @@ msgstr ""
 msgid "Invalid bits per value"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
+#: ports/nrf/common-hal/busio/UART.c ports/raspberrypi/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "Invalid buffer size"
 msgstr ""
 
@@ -1273,10 +1297,10 @@ msgstr ""
 #: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c
 #: ports/esp32s2/common-hal/busio/UART.c ports/esp32s2/common-hal/canio/CAN.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
-#: ports/mimxrt10xx/common-hal/busio/SPI.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/nrf/common-hal/busio/I2C.c
 #: ports/raspberrypi/common-hal/busio/I2C.c
 #: ports/raspberrypi/common-hal/busio/SPI.c
+#: ports/raspberrypi/common-hal/busio/UART.c
 msgid "Invalid pins"
 msgstr ""
 
@@ -1325,7 +1349,8 @@ msgstr ""
 msgid "Invalid wave file"
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Invalid word/bit length"
 msgstr ""
 
@@ -1452,6 +1477,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
+#: ports/raspberrypi/common-hal/audiobusio/I2SOut.c
 #: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
 msgid "No DMA channel found"
 msgstr ""
@@ -1518,6 +1544,14 @@ msgstr ""
 msgid "No hardware support on pin"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "No in in program"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "No in or out in program"
+msgstr ""
+
 #: shared-bindings/aesio/aes.c
 msgid "No key was specified"
 msgstr ""
@@ -1604,13 +1638,10 @@ msgid "Odd parity is not supported"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
+#: ports/raspberrypi/common-hal/audiobusio/PDMIn.c
 msgid "Only 8 or 16 bit mono with "
 msgstr ""
 
-#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
-msgid "Only IN/OUT of up to 8 supported"
-msgstr ""
-
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr ""
@@ -1664,6 +1695,10 @@ msgstr ""
 msgid "Out of sockets"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Out-buffer elements must be <= 4 bytes long"
+msgstr ""
+
 #: shared-bindings/bitops/__init__.c
 #, c-format
 msgid "Output buffer must be at least %d bytes"
@@ -1827,7 +1862,7 @@ msgstr ""
 msgid "RNG Init Error"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c
+#: ports/nrf/common-hal/busio/UART.c ports/raspberrypi/common-hal/busio/UART.c
 msgid "RS485 Not yet supported on this device"
 msgstr ""
 
@@ -1864,7 +1899,7 @@ msgstr ""
 msgid "Read-only filesystem"
 msgstr ""
 
-#: shared-module/displayio/Bitmap.c
+#: shared-module/bitmaptools/__init__.c shared-module/displayio/Bitmap.c
 msgid "Read-only object"
 msgstr ""
 
@@ -2097,6 +2132,7 @@ msgid "To exit, please reset the board without "
 msgstr ""
 
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
+#: ports/raspberrypi/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr ""
 
@@ -2136,10 +2172,6 @@ msgstr ""
 msgid "UART Re-init error"
 msgstr ""
 
-#: ports/raspberrypi/common-hal/busio/UART.c
-msgid "UART not yet supported"
-msgstr ""
-
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr ""
@@ -2166,6 +2198,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
+#: ports/raspberrypi/common-hal/audiobusio/I2SOut.c
 #: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
 msgid "Unable to allocate buffers for signed conversion"
 msgstr ""
@@ -2467,7 +2500,7 @@ msgid "binary op %q not implemented"
 msgstr ""
 
 #: shared-bindings/busio/UART.c
-msgid "bits must be 7, 8 or 9"
+msgid "bits must be in range 5 to 9"
 msgstr ""
 
 #: shared-bindings/audiomixer/Mixer.c
@@ -2695,6 +2728,10 @@ msgstr ""
 msgid "circle can only be registered in one parent"
 msgstr ""
 
+#: shared-bindings/bitmaptools/__init__.c
+msgid "clip point must be (x,y) tuple"
+msgstr ""
+
 #: shared-bindings/msgpack/ExtType.c
 msgid "code outside range 0~127"
 msgstr ""
@@ -3772,6 +3809,7 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
+#: ports/raspberrypi/common-hal/audiobusio/PDMIn.c
 msgid "sampling rate out of range"
 msgstr ""
 
@@ -3843,7 +3881,7 @@ msgstr ""
 msgid "sosfilt requires iterable arguments"
 msgstr ""
 
-#: shared-bindings/displayio/Bitmap.c
+#: shared-bindings/bitmaptools/__init__.c shared-bindings/displayio/Bitmap.c
 msgid "source palette too large"
 msgstr ""