Merge pull request #35 from adafruit/main

Update from adafruit/main

1 files changed, 184 insertions, 50 deletions

diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot
index 0a4303f66..11ca8c814 100644
--- a/locale/circuitpython.pot
+++ b/locale/circuitpython.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-11-04 21:18+0530\n"
+"POT-Creation-Date: 2020-12-08 09:56-0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -296,7 +296,9 @@ msgstr ""
 msgid "All I2C peripherals are in use"
 msgstr ""
 
-#: ports/esp32s2/peripherals/pcnt_handler.c
+#: ports/esp32s2/common-hal/countio/Counter.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
+#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
 msgid "All PCNT units in use"
 msgstr ""
 
@@ -332,6 +334,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 #: ports/esp32s2/common-hal/neopixel_write/__init__.c
 #: ports/esp32s2/common-hal/pulseio/PulseIn.c
 #: ports/esp32s2/common-hal/pulseio/PulseOut.c
@@ -495,6 +498,7 @@ msgstr ""
 msgid "Buffer must be a multiple of 512 bytes"
 msgstr ""
 
+#: shared-bindings/adafruit_bus_device/I2CDevice.c
 #: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
 msgid "Buffer must be at least length 1"
 msgstr ""
@@ -841,6 +845,10 @@ msgstr ""
 msgid "Expected an Address"
 msgstr ""
 
+#: shared-bindings/alarm/__init__.c
+msgid "Expected an alarm"
+msgstr ""
+
 #: shared-module/_pixelbuf/PixelBuf.c
 #, c-format
 msgid "Expected tuple of length %d, got %d"
@@ -854,6 +862,10 @@ msgstr ""
 msgid "FFT is defined for ndarrays only"
 msgstr ""
 
+#: extmod/ulab/code/fft/fft.c
+msgid "FFT is implemented for linear arrays only"
+msgstr ""
+
 #: ports/esp32s2/common-hal/socketpool/Socket.c
 msgid "Failed SSL handshake"
 msgstr ""
@@ -982,6 +994,10 @@ msgstr ""
 msgid "I2SOut not available"
 msgstr ""
 
+#: ports/esp32s2/common-hal/alarm/pin/__init__.c
+msgid "IOs 0, 2 & 4 do not support internal pullup in sleep"
+msgstr ""
+
 #: shared-bindings/aesio/aes.c
 #, c-format
 msgid "IV must be %d bytes long"
@@ -997,6 +1013,10 @@ msgstr ""
 msgid "Incorrect buffer size"
 msgstr ""
 
+#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
+msgid "Initialization failed due to lack of memory"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 msgid "Input taking too long"
 msgstr ""
@@ -1077,6 +1097,7 @@ msgid "Invalid byteorder string"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
+#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr ""
 
@@ -1253,6 +1274,10 @@ msgstr ""
 msgid "Must use a multiple of 6 rgb pins, not %d"
 msgstr ""
 
+#: ports/esp32s2/common-hal/nvm/ByteArray.c
+msgid "NVS Error"
+msgstr ""
+
 #: py/parse.c
 msgid "Name too long"
 msgstr ""
@@ -1271,6 +1296,11 @@ msgstr ""
 msgid "No DMA channel found"
 msgstr ""
 
+#: shared-module/adafruit_bus_device/I2CDevice.c
+#, c-format
+msgid "No I2C device at address: %x"
+msgstr ""
+
 #: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/stm/common-hal/busio/SPI.c
 msgid "No MISO Pin"
@@ -1403,14 +1433,14 @@ msgstr ""
 msgid "Only 8 or 16 bit mono with "
 msgstr ""
 
-#: ports/esp32s2/common-hal/socketpool/SocketPool.c
-msgid "Only IPv4 SOCK_STREAM sockets supported"
-msgstr ""
-
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr ""
 
+#: ports/esp32s2/common-hal/socketpool/SocketPool.c
+msgid "Only IPv4 sockets supported"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 #, c-format
 msgid ""
@@ -1424,6 +1454,10 @@ msgid ""
 "%d bpp given"
 msgstr ""
 
+#: ports/esp32s2/common-hal/alarm/__init__.c
+msgid "Only one alarm.time alarm can be set."
+msgstr ""
+
 #: shared-module/displayio/ColorConverter.c
 msgid "Only one color can be transparent at a time"
 msgstr ""
@@ -1469,6 +1503,7 @@ msgstr ""
 msgid "Pin does not have ADC capabilities"
 msgstr ""
 
+#: shared-bindings/adafruit_bus_device/SPIDevice.c
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pin is input only"
 msgstr ""
@@ -1481,6 +1516,10 @@ msgstr ""
 msgid "Pin number already reserved by EXTI"
 msgstr ""
 
+#: ports/esp32s2/common-hal/alarm/__init__.c
+msgid "PinAlarm not yet implemented"
+msgstr ""
+
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid ""
@@ -1517,7 +1556,11 @@ msgid "Prefix buffer must be on the heap"
 msgstr ""
 
 #: main.c
-msgid "Press any key to enter the REPL. Use CTRL-D to reload."
+msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n"
+msgstr ""
+
+#: main.c
+msgid "Pretending to deep sleep until alarm, any key or file write.\n"
 msgstr ""
 
 #: shared-bindings/digitalio/DigitalInOut.c
@@ -1542,7 +1585,7 @@ msgstr ""
 msgid "RTC calibration is not supported on this board"
 msgstr ""
 
-#: shared-bindings/time/__init__.c
+#: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c
 msgid "RTC is not supported on this board"
 msgstr ""
 
@@ -1688,6 +1731,10 @@ msgstr ""
 msgid "Supply at least one UART pin"
 msgstr ""
 
+#: shared-bindings/alarm/time/TimeAlarm.c
+msgid "Supply one of monotonic_time or epoch_time"
+msgstr ""
+
 #: shared-bindings/gnss/GNSS.c
 msgid "System entry must be gnss.SatelliteSystem"
 msgstr ""
@@ -1751,6 +1798,10 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr ""
 
+#: shared-bindings/alarm/time/TimeAlarm.c
+msgid "Time is in the past."
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Adapter.c
 #, c-format
 msgid "Timeout is too long: Maximum timeout length is %d seconds"
@@ -1946,7 +1997,7 @@ msgstr ""
 msgid "WARNING: Your code filename has two extensions\n"
 msgstr ""
 
-#: shared-bindings/watchdog/WatchDogTimer.c
+#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
 msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
 msgstr ""
 
@@ -1980,6 +2031,10 @@ msgstr ""
 msgid "WiFi password must be between 8 and 63 characters"
 msgstr ""
 
+#: main.c
+msgid "Woken up by alarm.\n"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/PacketBuffer.c
 msgid "Writes not supported on Characteristic"
 msgstr ""
@@ -2025,10 +2080,6 @@ msgstr ""
 msgid "addresses is empty"
 msgstr ""
 
-#: extmod/ulab/code/vector/vectorise.c
-msgid "arctan2 is implemented for scalars and ndarrays only"
-msgstr ""
-
 #: py/modbuiltins.c
 msgid "arg is an empty sequence"
 msgstr ""
@@ -2037,6 +2088,10 @@ msgstr ""
 msgid "argsort argument must be an ndarray"
 msgstr ""
 
+#: extmod/ulab/code/numerical/numerical.c
+msgid "argsort is not implemented for flattened arrays"
+msgstr ""
+
 #: py/runtime.c
 msgid "argument has wrong type"
 msgstr ""
@@ -2054,15 +2109,23 @@ msgstr ""
 msgid "argument should be a '%q' not a '%q'"
 msgstr ""
 
-#: extmod/ulab/code/linalg/linalg.c
+#: extmod/ulab/code/linalg/linalg.c extmod/ulab/code/numerical/numerical.c
 msgid "arguments must be ndarrays"
 msgstr ""
 
+#: extmod/ulab/code/ndarray.c
+msgid "array and index length must be equal"
+msgstr ""
+
 #: py/objarray.c shared-bindings/nvm/ByteArray.c
 msgid "array/bytes required on right side"
 msgstr ""
 
 #: extmod/ulab/code/numerical/numerical.c
+msgid "attempt to get (arg)min/(arg)max of empty sequence"
+msgstr ""
+
+#: extmod/ulab/code/numerical/numerical.c
 msgid "attempt to get argmin/argmax of an empty sequence"
 msgstr ""
 
@@ -2071,15 +2134,15 @@ msgid "attributes not supported yet"
 msgstr ""
 
 #: extmod/ulab/code/numerical/numerical.c
-msgid "axis must be -1, 0, None, or 1"
+msgid "axis is out of bounds"
 msgstr ""
 
 #: extmod/ulab/code/numerical/numerical.c
-msgid "axis must be -1, 0, or 1"
+msgid "axis must be None, or an integer"
 msgstr ""
 
 #: extmod/ulab/code/numerical/numerical.c
-msgid "axis must be None, 0, or 1"
+msgid "axis too long"
 msgstr ""
 
 #: py/builtinevex.c
@@ -2283,6 +2346,10 @@ msgid ""
 "can't switch from manual field specification to automatic field numbering"
 msgstr ""
 
+#: extmod/ulab/code/ndarray_operators.c
+msgid "cannot cast output with casting rule"
+msgstr ""
+
 #: py/objtype.c
 msgid "cannot create '%q' instances"
 msgstr ""
@@ -2299,10 +2366,6 @@ msgstr ""
 msgid "cannot perform relative import"
 msgstr ""
 
-#: extmod/ulab/code/ndarray.c
-msgid "cannot reshape array (incompatible input/output shape)"
-msgstr ""
-
 #: py/emitnative.c
 msgid "casting"
 msgstr ""
@@ -2375,10 +2438,6 @@ msgstr ""
 msgid "convolve arguments must not be empty"
 msgstr ""
 
-#: extmod/ulab/code/ndarray.c
-msgid "could not broadast input array from shape"
-msgstr ""
-
 #: extmod/ulab/code/poly/poly.c
 msgid "could not invert Vandermonde matrix"
 msgstr ""
@@ -2387,6 +2446,10 @@ msgstr ""
 msgid "couldn't determine SD card version"
 msgstr ""
 
+#: extmod/ulab/code/numerical/numerical.c
+msgid "cross is defined for 1D arrays of length 3"
+msgstr ""
+
 #: extmod/ulab/code/approx/approx.c
 msgid "data must be iterable"
 msgstr ""
@@ -2395,10 +2458,6 @@ msgstr ""
 msgid "data must be of equal length"
 msgstr ""
 
-#: extmod/ulab/code/numerical/numerical.c
-msgid "ddof must be smaller than length of data set"
-msgstr ""
-
 #: py/parsenum.c
 msgid "decimal numbers not supported"
 msgstr ""
@@ -2428,6 +2487,10 @@ msgstr ""
 msgid "diff argument must be an ndarray"
 msgstr ""
 
+#: extmod/ulab/code/numerical/numerical.c
+msgid "differentiation order out of range"
+msgstr ""
+
 #: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
 #: shared-bindings/math/__init__.c
 msgid "division by zero"
@@ -2457,6 +2520,10 @@ msgstr ""
 msgid "end_x should be an int"
 msgstr ""
 
+#: shared-bindings/alarm/time/TimeAlarm.c
+msgid "epoch_time not supported on this board"
+msgstr ""
+
 #: ports/nrf/common-hal/busio/UART.c
 #, c-format
 msgid "error = 0x%08lX"
@@ -2543,6 +2610,10 @@ msgstr ""
 msgid "first argument must be a function"
 msgstr ""
 
+#: extmod/ulab/code/ulab_create.c
+msgid "first argument must be a tuple of ndarrays"
+msgstr ""
+
 #: extmod/ulab/code/ndarray.c
 msgid "first argument must be an iterable"
 msgstr ""
@@ -2596,8 +2667,8 @@ msgstr ""
 msgid "function has the same sign at the ends of interval"
 msgstr ""
 
-#: extmod/ulab/code/compare/compare.c
-msgid "function is implemented for scalars and ndarrays only"
+#: extmod/ulab/code/ndarray.c
+msgid "function is defined for ndarrays only"
 msgstr ""
 
 #: py/argcheck.c
@@ -2667,6 +2738,7 @@ msgstr ""
 msgid "index is out of bounds"
 msgstr ""
 
+#: extmod/ulab/code/numerical/numerical.c
 #: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
 msgid "index out of range"
 msgstr ""
@@ -2691,6 +2763,10 @@ msgstr ""
 msgid "inline assembler must be a function"
 msgstr ""
 
+#: extmod/ulab/code/ndarray.c
+msgid "input and output shapes are not compatible"
+msgstr ""
+
 #: extmod/ulab/code/ulab_create.c
 msgid "input argument must be an integer or a 2-tuple"
 msgstr ""
@@ -2699,6 +2775,10 @@ msgstr ""
 msgid "input array length must be power of 2"
 msgstr ""
 
+#: extmod/ulab/code/ulab_create.c
+msgid "input arrays are not compatible"
+msgstr ""
+
 #: extmod/ulab/code/poly/poly.c
 msgid "input data must be an iterable"
 msgstr ""
@@ -2711,6 +2791,22 @@ msgstr ""
 msgid "input matrix is singular"
 msgstr ""
 
+#: extmod/ulab/code/user/user.c
+msgid "input must be a dense ndarray"
+msgstr ""
+
+#: extmod/ulab/code/ulab_create.c
+msgid "input must be a tensor of rank 2"
+msgstr ""
+
+#: extmod/ulab/code/ulab_create.c extmod/ulab/code/user/user.c
+msgid "input must be an ndarray"
+msgstr ""
+
+#: extmod/ulab/code/filter/filter.c
+msgid "input must be one-dimensional"
+msgstr ""
+
 #: extmod/ulab/code/linalg/linalg.c
 msgid "input must be square matrix"
 msgstr ""
@@ -2723,6 +2819,10 @@ msgstr ""
 msgid "input vectors must be of equal length"
 msgstr ""
 
+#: extmod/ulab/code/poly/poly.c
+msgid "inputs are not iterable"
+msgstr ""
+
 #: py/parsenum.c
 msgid "int() arg 2 must be >= 2 and <= 36"
 msgstr ""
@@ -2793,6 +2893,10 @@ msgstr ""
 msgid "invalid syntax for number"
 msgstr ""
 
+#: ports/esp32s2/common-hal/alarm/pin/__init__.c
+msgid "io must be rtc io"
+msgstr ""
+
 #: py/objtype.c
 msgid "issubclass() arg 1 must be a class"
 msgstr ""
@@ -2891,6 +2995,10 @@ msgstr ""
 msgid "max_length must be > 0"
 msgstr ""
 
+#: extmod/ulab/code/ndarray.c
+msgid "maximum number of dimensions is 4"
+msgstr ""
+
 #: py/runtime.c
 msgid "maximum recursion depth exceeded"
 msgstr ""
@@ -2940,10 +3048,6 @@ msgstr ""
 msgid "must use keyword argument for key function"
 msgstr ""
 
-#: extmod/ulab/code/numerical/numerical.c
-msgid "n must be between 0, and 9"
-msgstr ""
-
 #: py/runtime.c
 msgid "name '%q' is not defined"
 msgstr ""
@@ -3026,6 +3130,10 @@ msgstr ""
 msgid "non-keyword arg after keyword arg"
 msgstr ""
 
+#: extmod/ulab/code/linalg/linalg.c
+msgid "norm is defined for 1D and 2D arrays"
+msgstr ""
+
 #: shared-bindings/_bleio/UUID.c
 msgid "not a 128-bit UUID"
 msgstr ""
@@ -3038,10 +3146,6 @@ msgstr ""
 msgid "not enough arguments for format string"
 msgstr ""
 
-#: extmod/ulab/code/poly/poly.c
-msgid "number of arguments must be 2, or 3"
-msgstr ""
-
 #: extmod/ulab/code/ulab_create.c
 msgid "number of points must be at least 2"
 msgstr ""
@@ -3094,6 +3198,10 @@ msgstr ""
 msgid "odd-length string"
 msgstr ""
 
+#: extmod/ulab/code/ulab_create.c
+msgid "offset is too large"
+msgstr ""
+
 #: py/objstr.c py/objstrunicode.c
 msgid "offset out of bounds"
 msgstr ""
@@ -3116,6 +3224,14 @@ msgstr ""
 msgid "operands could not be broadcast together"
 msgstr ""
 
+#: extmod/ulab/code/ndarray.c
+msgid "operation is implemented for 1D Boolean arrays only"
+msgstr ""
+
+#: extmod/ulab/code/numerical/numerical.c
+msgid "operation is not implemented for flattened array"
+msgstr ""
+
 #: extmod/ulab/code/numerical/numerical.c
 msgid "operation is not implemented on ndarrays"
 msgstr ""
@@ -3206,6 +3322,7 @@ msgstr ""
 msgid "pow() with 3 arguments requires integers"
 msgstr ""
 
+#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
 #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
 #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
 #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
@@ -3249,6 +3366,10 @@ msgstr ""
 msgid "requested length %d but object has length %d"
 msgstr ""
 
+#: extmod/ulab/code/ndarray_operators.c
+msgid "results cannot be cast to specified type"
+msgstr ""
+
 #: py/compile.c
 msgid "return annotation must be an identifier"
 msgstr ""
@@ -3267,8 +3388,8 @@ msgstr ""
 msgid "rgb_pins[%d] is not on the same port as clock"
 msgstr ""
 
-#: extmod/ulab/code/ndarray.c
-msgid "right hand side must be an ndarray, or a scalar"
+#: extmod/ulab/code/numerical/numerical.c
+msgid "roll argument must be an ndarray"
 msgstr ""
 
 #: py/objstr.c
@@ -3294,7 +3415,7 @@ msgid "script compilation not supported"
 msgstr ""
 
 #: extmod/ulab/code/ndarray.c
-msgid "shape must be a 2-tuple"
+msgid "shape must be a tuple"
 msgstr ""
 
 #: py/objstr.c
@@ -3337,10 +3458,6 @@ msgstr ""
 msgid "sort argument must be an ndarray"
 msgstr ""
 
-#: extmod/ulab/code/numerical/numerical.c
-msgid "sorted axis can't be longer than 65535"
-msgstr ""
-
 #: extmod/ulab/code/filter/filter.c
 msgid "sos array must be of shape (n_section, 6)"
 msgstr ""
@@ -3421,6 +3538,7 @@ msgstr ""
 msgid "time.struct_time() takes a 9-sequence"
 msgstr ""
 
+#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
 msgid "timeout duration exceeded the maximum supported value"
 msgstr ""
@@ -3445,6 +3563,10 @@ msgstr ""
 msgid "timestamp out of range for platform time_t"
 msgstr ""
 
+#: extmod/ulab/code/ndarray.c
+msgid "tobytes can be invoked for dense arrays only"
+msgstr ""
+
 #: shared-module/struct/__init__.c
 msgid "too many arguments provided with the given format"
 msgstr ""
@@ -3462,6 +3584,10 @@ msgstr ""
 msgid "trapz is defined for 1D arrays of equal length"
 msgstr ""
 
+#: ports/esp32s2/common-hal/alarm/pin/__init__.c
+msgid "trigger level must be 0 or 1"
+msgstr ""
+
 #: extmod/ulab/code/linalg/linalg.c
 msgid "tuple index out of range"
 msgstr ""
@@ -3604,6 +3730,14 @@ msgstr ""
 msgid "vectors must have same lengths"
 msgstr ""
 
+#: ports/esp32s2/common-hal/alarm/pin/__init__.c
+msgid "wakeup conflict"
+msgstr ""
+
+#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
+msgid "watchdog not initialized"
+msgstr ""
+
 #: shared-bindings/watchdog/WatchDogTimer.c
 msgid "watchdog timeout must be greater than 0"
 msgstr ""
@@ -3616,12 +3750,12 @@ msgstr ""
 msgid "window must be <= interval"
 msgstr ""
 
-#: extmod/ulab/code/linalg/linalg.c
-msgid "wrong argument type"
+#: extmod/ulab/code/numerical/numerical.c
+msgid "wrong axis index"
 msgstr ""
 
-#: extmod/ulab/code/ndarray.c
-msgid "wrong index type"
+#: extmod/ulab/code/ulab_create.c
+msgid "wrong axis specified"
 msgstr ""
 
 #: extmod/ulab/code/vector/vectorise.c