objslice: take mp_obj_slice_indices from micropython

1 files changed, 23 insertions, 180 deletions

diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot
index 7b56d28dc..c9bad41d0 100644
--- a/locale/circuitpython.pot
+++ b/locale/circuitpython.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-03-11 17:52-0400\n"
+"POT-Creation-Date: 2020-03-16 20:59-0500\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -472,10 +472,6 @@ msgstr ""
 msgid "Cannot unambiguously get sizeof scalar"
 msgstr ""
 
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
-msgid "Cannot vary frequency on a timer that is already in use"
-msgstr ""
-
 #: shared-module/bitbangio/SPI.c
 msgid "Cannot write without MOSI pin."
 msgstr ""
@@ -533,34 +529,6 @@ msgstr ""
 msgid "Could not initialize UART"
 msgstr ""
 
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
-msgid "Could not initialize channel"
-msgstr ""
-
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
-msgid "Could not initialize timer"
-msgstr ""
-
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
-msgid "Could not re-init channel"
-msgstr ""
-
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
-msgid "Could not re-init timer"
-msgstr ""
-
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
-msgid "Could not restart PWM"
-msgstr ""
-
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
-msgid "Could not start PWM"
-msgstr ""
-
-#: ports/stm32f4/common-hal/busio/UART.c
-msgid "Could not start interrupt, RX busy"
-msgstr ""
-
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Couldn't allocate decoder"
 msgstr ""
@@ -583,14 +551,6 @@ msgstr ""
 msgid "Crash into the HardFault_Handler."
 msgstr ""
 
-#: ports/stm32f4/common-hal/analogio/AnalogOut.c
-msgid "DAC Channel Init Error"
-msgstr ""
-
-#: ports/stm32f4/common-hal/analogio/AnalogOut.c
-msgid "DAC Device Init Error"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "DAC already in use"
 msgstr ""
@@ -698,7 +658,6 @@ msgstr ""
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
-#: ports/stm32f4/common-hal/pulseio/PulseIn.c
 #, c-format
 msgid "Failed to allocate RX buffer of %d bytes"
 msgstr ""
@@ -732,10 +691,6 @@ msgstr ""
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr ""
 
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
-msgid "Frequency must match existing PWMOut using this timer"
-msgstr ""
-
 #: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c
 #: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c
 msgid "Function requires lock"
@@ -750,22 +705,10 @@ msgstr ""
 msgid "Group full"
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/I2C.c ports/stm32f4/common-hal/busio/SPI.c
-msgid "Hardware busy, try alternative pins"
-msgstr ""
-
-#: ports/stm32f4/common-hal/busio/UART.c
-msgid "Hardware in use, try alternative pins"
-msgstr ""
-
 #: extmod/vfs_posix_file.c py/objstringio.c
 msgid "I/O operation on closed file"
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/I2C.c
-msgid "I2C Init Error"
-msgstr ""
-
 #: extmod/machine_i2c.c
 msgid "I2C operation not supported"
 msgstr ""
@@ -792,28 +735,16 @@ msgstr ""
 msgid "Insufficient encryption"
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/UART.c
-msgid "Internal define error"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "Invalid %q pin"
 msgstr ""
 
-#: ports/stm32f4/common-hal/analogio/AnalogIn.c
-msgid "Invalid ADC Unit value"
-msgstr ""
-
 #: shared-module/displayio/OnDiskBitmap.c
 msgid "Invalid BMP file"
 msgstr ""
 
-#: ports/stm32f4/common-hal/analogio/AnalogOut.c
-msgid "Invalid DAC pin supplied"
-msgstr ""
-
-#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/stm32f4/common-hal/busio/I2C.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 msgid "Invalid I2C pin selection"
 msgstr ""
 
@@ -823,12 +754,11 @@ msgstr ""
 msgid "Invalid PWM frequency"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm32f4/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c
 msgid "Invalid SPI pin selection"
 msgstr ""
 
 #: ports/mimxrt10xx/common-hal/busio/UART.c
-#: ports/stm32f4/common-hal/busio/UART.c
 msgid "Invalid UART pin selection"
 msgstr ""
 
@@ -840,7 +770,7 @@ msgstr ""
 msgid "Invalid bits per value"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c ports/stm32f4/common-hal/busio/UART.c
+#: ports/nrf/common-hal/busio/UART.c
 msgid "Invalid buffer size"
 msgstr ""
 
@@ -868,10 +798,6 @@ msgstr ""
 msgid "Invalid format chunk size"
 msgstr ""
 
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
-msgid "Invalid frequency supplied"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid "Invalid memory access."
 msgstr ""
@@ -907,10 +833,6 @@ msgstr ""
 msgid "Invalid pins"
 msgstr ""
 
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
-msgid "Invalid pins for PWMOut"
-msgstr ""
-
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
 msgid "Invalid polarity"
 msgstr ""
@@ -939,10 +861,6 @@ msgstr ""
 msgid "Invalid wave file"
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/UART.c
-msgid "Invalid word/bit length"
-msgstr ""
-
 #: py/compile.c
 msgid "LHS of keyword arg must be an id"
 msgstr ""
@@ -988,18 +906,10 @@ msgstr ""
 msgid "Microphone startup delay must be in range 0.0 to 1.0"
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/SPI.c
-msgid "Missing MISO or MOSI Pin"
-msgstr ""
-
 #: shared-bindings/displayio/Group.c
 msgid "Must be a %q subclass."
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/SPI.c
-msgid "Must provide MISO or MOSI pin"
-msgstr ""
-
 #: py/parse.c
 msgid "Name too long"
 msgstr ""
@@ -1013,7 +923,6 @@ msgid "No CCCD for this Characteristic"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/analogio/AnalogOut.c
-#: ports/stm32f4/common-hal/analogio/AnalogOut.c
 msgid "No DAC on chip"
 msgstr ""
 
@@ -1022,23 +931,13 @@ msgstr ""
 msgid "No DMA channel found"
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/SPI.c
-msgid "No MISO Pin"
-msgstr ""
-
-#: ports/stm32f4/common-hal/busio/SPI.c
-msgid "No MOSI Pin"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm32f4/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm32f4/common-hal/busio/UART.c
 msgid "No TX pin"
 msgstr ""
 
@@ -1067,10 +966,6 @@ msgstr ""
 msgid "No hardware support on pin"
 msgstr ""
 
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
-msgid "No more timers available on this pin."
-msgstr ""
-
 #: shared-module/touchio/TouchIn.c
 msgid "No pulldown on pin; 1Mohm recommended"
 msgstr ""
@@ -1138,7 +1033,6 @@ msgid ""
 msgstr ""
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
-#: ports/stm32f4/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr ""
 
@@ -1150,14 +1044,9 @@ msgstr ""
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
-#: ports/stm32f4/common-hal/analogio/AnalogIn.c
 msgid "Pin does not have ADC capabilities"
 msgstr ""
 
-#: ports/stm32f4/common-hal/pulseio/PulseIn.c
-msgid "Pin number already reserved by EXTI"
-msgstr ""
-
 #: py/builtinhelp.c
 msgid "Plus any modules on the filesystem\n"
 msgstr ""
@@ -1178,18 +1067,6 @@ msgstr ""
 msgid "Pull not used when direction is output."
 msgstr ""
 
-#: ports/stm32f4/common-hal/pulseio/PulseOut.c
-msgid "PulseOut not supported on this chip"
-msgstr ""
-
-#: ports/stm32f4/common-hal/os/__init__.c
-msgid "RNG DeInit Error"
-msgstr ""
-
-#: ports/stm32f4/common-hal/os/__init__.c
-msgid "RNG Init Error"
-msgstr ""
-
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "RS485 inversion specified when not in RS485 mode"
 msgstr ""
@@ -1204,14 +1081,10 @@ msgid "RTC is not supported on this board"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
-#: ports/nrf/common-hal/busio/UART.c ports/stm32f4/common-hal/busio/UART.c
+#: ports/nrf/common-hal/busio/UART.c
 msgid "RTS/CTS/RS485 Not yet supported on this device"
 msgstr ""
 
-#: ports/stm32f4/common-hal/os/__init__.c
-msgid "Random number generation error"
-msgstr ""
-
 #: shared-bindings/pulseio/PulseIn.c
 msgid "Read-only"
 msgstr ""
@@ -1248,14 +1121,6 @@ msgstr ""
 msgid "SDA or SCL needs a pull up"
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/SPI.c
-msgid "SPI Init Error"
-msgstr ""
-
-#: ports/stm32f4/common-hal/busio/SPI.c
-msgid "SPI Re-initialization error"
-msgstr ""
-
 #: shared-bindings/audiomixer/Mixer.c
 msgid "Sample rate must be positive"
 msgstr ""
@@ -1303,14 +1168,6 @@ msgstr ""
 msgid "Stream missing readinto() or write() method."
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/UART.c
-msgid "Supply at least one UART pin"
-msgstr ""
-
-#: ports/stm32f4/common-hal/microcontroller/Processor.c
-msgid "Temperature read timed out"
-msgstr ""
-
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
@@ -1384,26 +1241,6 @@ msgstr ""
 msgid "Tuple or struct_time argument required"
 msgstr ""
 
-#: ports/stm32f4/common-hal/busio/UART.c
-msgid "UART Buffer allocation error"
-msgstr ""
-
-#: ports/stm32f4/common-hal/busio/UART.c
-msgid "UART De-init error"
-msgstr ""
-
-#: ports/stm32f4/common-hal/busio/UART.c
-msgid "UART Init Error"
-msgstr ""
-
-#: ports/stm32f4/common-hal/busio/UART.c
-msgid "UART Re-init error"
-msgstr ""
-
-#: ports/stm32f4/common-hal/busio/UART.c
-msgid "UART write error"
-msgstr ""
-
 #: shared-module/usb_hid/Device.c
 msgid "USB Busy"
 msgstr ""
@@ -1519,10 +1356,6 @@ msgstr ""
 msgid "Viper functions don't currently support more than 4 arguments"
 msgstr ""
 
-#: ports/stm32f4/common-hal/microcontroller/Processor.c
-msgid "Voltage read timed out"
-msgstr ""
-
 #: main.c
 msgid "WARNING: Your code filename has two extensions\n"
 msgstr ""
@@ -1583,6 +1416,10 @@ msgstr ""
 msgid "addresses is empty"
 msgstr ""
 
+#: extmod/ulab/code/vectorise.c
+msgid "arctan2 is implemented for scalars and ndarrays only"
+msgstr ""
+
 #: py/modbuiltins.c
 msgid "arg is an empty sequence"
 msgstr ""
@@ -1996,10 +1833,6 @@ msgstr ""
 msgid "empty heap"
 msgstr ""
 
-#: extmod/ulab/code/ndarray.c
-msgid "empty index range"
-msgstr ""
-
 #: py/objstr.c
 msgid "empty separator"
 msgstr ""
@@ -2090,6 +1923,10 @@ msgstr ""
 msgid "first argument must be an iterable"
 msgstr ""
 
+#: extmod/ulab/code/vectorise.c
+msgid "first argument must be an ndarray"
+msgstr ""
+
 #: py/objtype.c
 msgid "first argument to super() must be type"
 msgstr ""
@@ -2139,6 +1976,10 @@ msgstr ""
 msgid "function got multiple values for argument '%q'"
 msgstr ""
 
+#: extmod/ulab/code/linalg.c
+msgid "function is defined for ndarrays only"
+msgstr ""
+
 #: py/argcheck.c
 #, c-format
 msgid "function missing %d required positional arguments"
@@ -2208,8 +2049,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
-#: ports/nrf/common-hal/pulseio/PulseIn.c
-#: ports/stm32f4/common-hal/pulseio/PulseIn.c py/obj.c
+#: ports/nrf/common-hal/pulseio/PulseIn.c py/obj.c
 msgid "index out of range"
 msgstr ""
 
@@ -2407,6 +2247,10 @@ msgstr ""
 msgid "matrix dimensions do not match"
 msgstr ""
 
+#: extmod/ulab/code/linalg.c
+msgid "matrix is not positive definite"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 #: ports/nrf/common-hal/_bleio/Descriptor.c
 #, c-format
@@ -2635,7 +2479,7 @@ msgstr ""
 msgid "only square matrices can be inverted"
 msgstr ""
 
-#: extmod/ulab/code/ndarray.c
+#: extmod/ulab/code/ndarray.c extmod/ulab/code/vectorise.c
 msgid "operands could not be broadcast together"
 msgstr ""
 
@@ -2695,7 +2539,6 @@ msgstr ""
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
-#: ports/stm32f4/common-hal/pulseio/PulseIn.c
 msgid "pop from an empty PulseIn"
 msgstr ""