Merge pull request #2 from adafruit/5.0.x

5.0.x

1 files changed, 332 insertions, 116 deletions

diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot
index 24278f33c..354dbc4ba 100644
--- a/locale/circuitpython.pot
+++ b/locale/circuitpython.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-11-21 16:50-0800\n"
+"POT-Creation-Date: 2020-02-19 08:44+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -23,6 +23,19 @@ msgid ""
 "Code done running. Waiting for reload.\n"
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"Please file an issue with the contents of your CIRCUITPY drive at \n"
+"https://github.com/adafruit/circuitpython/issues\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"\n"
+"To exit, please reset the board without "
+msgstr ""
+
 #: py/obj.c
 msgid "  File \"%q\""
 msgstr ""
@@ -53,7 +66,8 @@ msgid "%q indices must be integers, not %s"
 msgstr ""
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
-#: shared-bindings/displayio/Group.c shared-bindings/displayio/Shape.c
+#: shared-bindings/_bleio/PacketBuffer.c shared-bindings/displayio/Group.c
+#: shared-bindings/displayio/Shape.c
 msgid "%q must be >= 1"
 msgstr ""
 
@@ -119,6 +133,10 @@ msgstr ""
 msgid "'%s' integer 0x%x does not fit in mask 0x%x"
 msgstr ""
 
+#: py/proto.c
+msgid "'%s' object does not support '%q'"
+msgstr ""
+
 #: py/obj.c
 #, c-format
 msgid "'%s' object does not support item assignment"
@@ -253,6 +271,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
+#: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseOut.c shared-bindings/pulseio/PWMOut.c
 #: shared-module/_pew/PewPew.c
@@ -263,6 +282,12 @@ msgstr ""
 msgid "Already advertising."
 msgstr ""
 
+#: ports/cxd56/common-hal/analogio/AnalogIn.c
+msgid "AnalogIn not supported on given pin"
+msgstr ""
+
+#: ports/cxd56/common-hal/analogio/AnalogOut.c
+#: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c
 #: ports/nrf/common-hal/analogio/AnalogOut.c
 msgid "AnalogOut functionality not supported"
 msgstr ""
@@ -276,6 +301,7 @@ msgid "AnalogOut not supported on given pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
+#: ports/cxd56/common-hal/pulseio/PulseOut.c
 msgid "Another send is already active"
 msgstr ""
 
@@ -288,7 +314,7 @@ msgid "Array values should be single bytes."
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "Attempted heap allocation when MicroPython VM not running.\n"
+msgid "Attempted heap allocation when MicroPython VM not running."
 msgstr ""
 
 #: main.c
@@ -356,6 +382,10 @@ msgstr ""
 msgid "Buffer must be at least length 1"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/PacketBuffer.c
+msgid "Buffer too large and unable to allocate"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 #, c-format
@@ -374,11 +404,6 @@ msgstr ""
 msgid "Call super().__init__() before accessing native object."
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
-msgid "Can not use dotstar with %s"
-msgstr ""
-
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "Can't set CCCD on local Characteristic"
 msgstr ""
@@ -388,6 +413,7 @@ msgid "Cannot delete values"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
+#: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c
 #: ports/nrf/common-hal/digitalio/DigitalInOut.c
 msgid "Cannot get pull while in output mode"
 msgstr ""
@@ -396,6 +422,10 @@ msgstr ""
 msgid "Cannot get temperature"
 msgstr ""
 
+#: shared-bindings/_bleio/Adapter.c
+msgid "Cannot have scan responses for extended, connectable advertisements."
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
 msgstr ""
@@ -413,6 +443,8 @@ msgid "Cannot remount '/' when USB is active."
 msgstr ""
 
 #: ports/atmel-samd/common-hal/microcontroller/__init__.c
+#: ports/cxd56/common-hal/microcontroller/__init__.c
+#: ports/mimxrt10xx/common-hal/microcontroller/__init__.c
 msgid "Cannot reset into bootloader because no bootloader is present."
 msgstr ""
 
@@ -420,6 +452,10 @@ msgstr ""
 msgid "Cannot set value when direction is input."
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Cannot specify RTS or CTS in RS485 mode"
+msgstr ""
+
 #: py/objslice.c
 msgid "Cannot subclass slice"
 msgstr ""
@@ -432,6 +468,10 @@ msgstr ""
 msgid "Cannot unambiguously get sizeof scalar"
 msgstr ""
 
+#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+msgid "Cannot vary frequency on a timer that is already in use"
+msgstr ""
+
 #: shared-module/bitbangio/SPI.c
 msgid "Cannot write without MOSI pin."
 msgstr ""
@@ -440,6 +480,16 @@ msgstr ""
 msgid "CharacteristicBuffer writing not provided"
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid "CircuitPython core code crashed hard. Whoops!\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid ""
+"CircuitPython is in safe mode because you pressed the reset button during "
+"boot. Press again to exit safe mode.\n"
+msgstr ""
+
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
 msgstr ""
@@ -456,11 +506,8 @@ msgstr ""
 msgid "Column entry must be digitalio.DigitalInOut"
 msgstr ""
 
-#: shared-bindings/displayio/I2CDisplay.c
-msgid "Command must be 0-255"
-msgstr ""
-
-#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/ParallelBus.c
+#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
+#: shared-bindings/displayio/ParallelBus.c
 msgid "Command must be an int between 0 and 255"
 msgstr ""
 
@@ -478,20 +525,66 @@ msgstr ""
 msgid "Corrupt raw code"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr ""
 
+#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+msgid "Could not initialize channel"
+msgstr ""
+
+#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+msgid "Could not initialize timer"
+msgstr ""
+
+#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+msgid "Could not re-init channel"
+msgstr ""
+
+#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+msgid "Could not re-init timer"
+msgstr ""
+
+#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+msgid "Could not restart PWM"
+msgstr ""
+
+#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+msgid "Could not start PWM"
+msgstr ""
+
+#: ports/stm32f4/common-hal/busio/UART.c
+msgid "Could not start interrupt, RX busy"
+msgstr ""
+
+#: shared-module/audiomp3/MP3Decoder.c
+msgid "Couldn't allocate decoder"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3Decoder.c
 msgid "Couldn't allocate first buffer"
 msgstr ""
 
+#: shared-module/audiomp3/MP3Decoder.c
+msgid "Couldn't allocate input buffer"
+msgstr ""
+
 #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
+#: shared-module/audiomp3/MP3Decoder.c
 msgid "Couldn't allocate second buffer"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "Crash into the HardFault_Handler.\n"
+msgid "Crash into the HardFault_Handler."
+msgstr ""
+
+#: ports/stm32f4/common-hal/analogio/AnalogOut.c
+msgid "DAC Channel Init Error"
+msgstr ""
+
+#: ports/stm32f4/common-hal/analogio/AnalogOut.c
+msgid "DAC Device Init Error"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
@@ -519,6 +612,10 @@ msgstr ""
 msgid "Device in use"
 msgstr ""
 
+#: ports/cxd56/common-hal/digitalio/DigitalInOut.c
+msgid "DigitalInOut not supported on given pin"
+msgstr ""
+
 #: shared-bindings/displayio/Display.c
 msgid "Display must have a 16 bit colorspace."
 msgstr ""
@@ -535,6 +632,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/ps2io/Ps2.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
+#: ports/cxd56/common-hal/pulseio/PulseIn.c
 msgid "EXTINT channel already in use"
 msgstr ""
 
@@ -549,7 +647,7 @@ msgid "Expected a %q"
 msgstr ""
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
-#: shared-bindings/_bleio/Descriptor.c
+#: shared-bindings/_bleio/Descriptor.c shared-bindings/_bleio/PacketBuffer.c
 msgid "Expected a Characteristic"
 msgstr ""
 
@@ -571,6 +669,10 @@ msgstr ""
 msgid "Expected tuple of length %d, got %d"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/Adapter.c
+msgid "Extended advertisements with scan response not supported."
+msgstr ""
+
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
 msgstr ""
@@ -580,11 +682,13 @@ msgstr ""
 msgid "Failed to acquire mutex, err 0x%04x"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "Failed to allocate RX buffer"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
+#: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #, c-format
 msgid "Failed to allocate RX buffer of %d bytes"
@@ -598,37 +702,31 @@ msgstr ""
 msgid "Failed to connect: timeout"
 msgstr ""
 
-#: ports/nrf/sd_mutex.c
-#, c-format
-msgid "Failed to release mutex, err 0x%04x"
-msgstr ""
-
-#: py/moduerrno.c
-msgid "File exists"
+#: shared-module/audiomp3/MP3Decoder.c
+msgid "Failed to parse MP3 file"
 msgstr ""
 
-#: ports/nrf/peripherals/nrf/nvm.c
-msgid "Flash erase failed"
-msgstr ""
-
-#: ports/nrf/peripherals/nrf/nvm.c
+#: ports/nrf/sd_mutex.c
 #, c-format
-msgid "Flash erase failed to start, err 0x%04x"
+msgid "Failed to release mutex, err 0x%04x"
 msgstr ""
 
-#: ports/nrf/peripherals/nrf/nvm.c
-msgid "Flash write failed"
+#: supervisor/shared/safe_mode.c
+msgid "Failed to write internal flash."
 msgstr ""
 
-#: ports/nrf/peripherals/nrf/nvm.c
-#, c-format
-msgid "Flash write failed to start, err 0x%04x"
+#: py/moduerrno.c
+msgid "File exists"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr ""
 
+#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+msgid "Frequency must match existing PWMOut using this timer"
+msgstr ""
+
 #: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c
 #: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c
 msgid "Function requires lock"
@@ -643,10 +741,22 @@ msgstr ""
 msgid "Group full"
 msgstr ""
 
+#: ports/stm32f4/common-hal/busio/I2C.c ports/stm32f4/common-hal/busio/SPI.c
+msgid "Hardware busy, try alternative pins"
+msgstr ""
+
+#: ports/stm32f4/common-hal/busio/UART.c
+msgid "Hardware in use, try alternative pins"
+msgstr ""
+
 #: extmod/vfs_posix_file.c py/objstringio.c
 msgid "I/O operation on closed file"
 msgstr ""
 
+#: ports/stm32f4/common-hal/busio/I2C.c
+msgid "I2C Init Error"
+msgstr ""
+
 #: extmod/machine_i2c.c
 msgid "I2C operation not supported"
 msgstr ""
@@ -673,20 +783,46 @@ msgstr ""
 msgid "Insufficient encryption"
 msgstr ""
 
+#: ports/stm32f4/common-hal/busio/UART.c
+msgid "Internal define error"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "Invalid %q pin"
 msgstr ""
 
+#: ports/stm32f4/common-hal/analogio/AnalogIn.c
+msgid "Invalid ADC Unit value"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 msgid "Invalid BMP file"
 msgstr ""
 
+#: ports/stm32f4/common-hal/analogio/AnalogOut.c
+msgid "Invalid DAC pin supplied"
+msgstr ""
+
+#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/stm32f4/common-hal/busio/I2C.c
+msgid "Invalid I2C pin selection"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PWMOut.c
+#: ports/cxd56/common-hal/pulseio/PWMOut.c
 #: ports/nrf/common-hal/pulseio/PWMOut.c shared-bindings/pulseio/PWMOut.c
 msgid "Invalid PWM frequency"
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm32f4/common-hal/busio/SPI.c
+msgid "Invalid SPI pin selection"
+msgstr ""
+
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+#: ports/stm32f4/common-hal/busio/UART.c
+msgid "Invalid UART pin selection"
+msgstr ""
+
 #: py/moduerrno.c
 msgid "Invalid argument"
 msgstr ""
@@ -695,10 +831,14 @@ msgstr ""
 msgid "Invalid bits per value"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c
+#: ports/nrf/common-hal/busio/UART.c ports/stm32f4/common-hal/busio/UART.c
 msgid "Invalid buffer size"
 msgstr ""
 
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Invalid byteorder string"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
 msgstr ""
@@ -719,6 +859,14 @@ msgstr ""
 msgid "Invalid format chunk size"
 msgstr ""
 
+#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+msgid "Invalid frequency supplied"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid "Invalid memory access."
+msgstr ""
+
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
 msgid "Invalid number of bits"
 msgstr ""
@@ -745,7 +893,9 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/SPI.c
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
-#: ports/nrf/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
+#: ports/cxd56/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/stm32f4/common-hal/pulseio/PWMOut.c
 msgid "Invalid pins"
 msgstr ""
 
@@ -777,6 +927,10 @@ msgstr ""
 msgid "Invalid wave file"
 msgstr ""
 
+#: ports/stm32f4/common-hal/busio/UART.c
+msgid "Invalid word/bit length"
+msgstr ""
+
 #: py/compile.c
 msgid "LHS of keyword arg must be an id"
 msgstr ""
@@ -797,13 +951,6 @@ msgstr ""
 msgid "Length must be non-negative"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid ""
-"Looks like our core CircuitPython code crashed hard. Whoops!\n"
-"Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
-" with the contents of your CIRCUITPY drive and this message:\n"
-msgstr ""
-
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
 msgstr ""
@@ -818,26 +965,39 @@ msgid "Maximum x value when mirrored is %d"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgid "MicroPython NLR jump failed. Likely memory corruption."
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
-msgid "MicroPython fatal error.\n"
+msgid "MicroPython fatal error."
 msgstr ""
 
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Microphone startup delay must be in range 0.0 to 1.0"
 msgstr ""
 
+#: ports/stm32f4/common-hal/busio/SPI.c
+msgid "Missing MISO or MOSI Pin"
+msgstr ""
+
 #: shared-bindings/displayio/Group.c
 msgid "Must be a %q subclass."
 msgstr ""
 
+#: ports/stm32f4/common-hal/busio/SPI.c
+msgid "Must provide MISO or MOSI pin"
+msgstr ""
+
+#: shared-bindings/_pixelbuf/PixelBuf.c
+msgid "Negative step not supported"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "No CCCD for this Characteristic"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/analogio/AnalogOut.c
+#: ports/stm32f4/common-hal/analogio/AnalogOut.c
 msgid "No DAC on chip"
 msgstr ""
 
@@ -846,11 +1006,23 @@ msgstr ""
 msgid "No DMA channel found"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/stm32f4/common-hal/busio/SPI.c
+msgid "No MISO Pin"
+msgstr ""
+
+#: ports/stm32f4/common-hal/busio/SPI.c
+msgid "No MOSI Pin"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/stm32f4/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/stm32f4/common-hal/busio/UART.c
 msgid "No TX pin"
 msgstr ""
 
@@ -879,6 +1051,10 @@ msgstr ""
 msgid "No hardware support on pin"
 msgstr ""
 
+#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+msgid "No more timers available on this pin."
+msgstr ""
+
 #: shared-module/touchio/TouchIn.c
 msgid "No pulldown on pin; 1Mohm recommended"
 msgstr ""
@@ -891,6 +1067,10 @@ msgstr ""
 msgid "No such file/directory"
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid "Nordic Soft Device failure assertion."
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "Not connected"
@@ -927,10 +1107,6 @@ msgid ""
 "%d bpp given"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "Only slices with step=1 (aka None) are supported"
-msgstr ""
-
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
 msgstr ""
@@ -945,19 +1121,22 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr ""
 
+#: ports/stm32f4/common-hal/displayio/ParallelBus.c
+msgid "ParallelBus not yet supported"
+msgstr ""
+
 #: py/moduerrno.c
 msgid "Permission denied"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
+#: ports/cxd56/common-hal/analogio/AnalogIn.c
+#: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
+#: ports/stm32f4/common-hal/analogio/AnalogIn.c
 msgid "Pin does not have ADC capabilities"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "Pixel beyond bounds of buffer"
-msgstr ""
-
 #: py/builtinhelp.c
 msgid "Plus any modules on the filesystem\n"
 msgstr ""
@@ -978,6 +1157,27 @@ msgstr ""
 msgid "Pull not used when direction is output."
 msgstr ""
 
+#: ports/stm32f4/common-hal/pulseio/PulseIn.c
+msgid "PulseIn not yet supported"
+msgstr ""
+
+#: ports/stm32f4/common-hal/pulseio/PulseOut.c
+msgid "PulseOut not yet supported"
+msgstr ""
+
+#: ports/stm32f4/common-hal/os/__init__.c
+msgid "RNG DeInit Error"
+msgstr ""
+
+#: ports/stm32f4/common-hal/os/__init__.c
+msgid "RNG Init Error"
+msgstr ""
+
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "RS485 inversion specified when not in RS485 mode"
+msgstr ""
+
+#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c
 #: ports/nrf/common-hal/rtc/RTC.c
 msgid "RTC calibration is not supported on this board"
 msgstr ""
@@ -986,8 +1186,13 @@ msgstr ""
 msgid "RTC is not supported on this board"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "Range out of bounds"
+#: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
+#: ports/nrf/common-hal/busio/UART.c ports/stm32f4/common-hal/busio/UART.c
+msgid "RTS/CTS/RS485 Not yet supported on this device"
+msgstr ""
+
+#: ports/stm32f4/common-hal/os/__init__.c
+msgid "Random number generation error"
 msgstr ""
 
 #: shared-bindings/pulseio/PulseIn.c
@@ -1026,12 +1231,19 @@ msgstr ""
 msgid "SDA or SCL needs a pull up"
 msgstr ""
 
+#: ports/stm32f4/common-hal/busio/SPI.c
+msgid "SPI Init Error"
+msgstr ""
+
+#: ports/stm32f4/common-hal/busio/SPI.c
+msgid "SPI Re-initialization error"
+msgstr ""
+
 #: shared-bindings/audiomixer/Mixer.c
 msgid "Sample rate must be positive"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
-#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Sample rate too high. It must be less than %d"
 msgstr ""
@@ -1040,6 +1252,14 @@ msgstr ""
 msgid "Scan already in progess. Stop with stop_scan."
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Selected CTS pin not valid"
+msgstr ""
+
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Selected RTS pin not valid"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "Serializer in use"
@@ -1066,13 +1286,18 @@ msgstr ""
 msgid "Stream missing readinto() or write() method."
 msgstr ""
 
+#: ports/stm32f4/common-hal/busio/UART.c
+msgid "Supply at least one UART pin"
+msgstr ""
+
+#: ports/stm32f4/common-hal/microcontroller/Processor.c
+msgid "Temperature read timed out"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
-"Please increase stack size limits and press reset (after ejecting "
-"CIRCUITPY).\n"
-"If you didn't change the stack, then file an issue here with the contents of "
-"your CIRCUITPY drive:\n"
+"Please increase the stack size if you know how, or if not:"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
@@ -1083,18 +1308,11 @@ msgstr ""
 
 #: supervisor/shared/safe_mode.c
 msgid ""
-"The microcontroller's power dipped. Please make sure your power supply "
-"provides\n"
+"The microcontroller's power dipped. Make sure your power supply provides\n"
 "enough power for the whole circuit and press reset (after ejecting "
 "CIRCUITPY).\n"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid ""
-"The reset button was pressed while booting CircuitPython. Press again to "
-"exit safe mode.\n"
-msgstr ""
-
 #: shared-module/audiomixer/MixerVoice.c
 msgid "The sample's bits_per_sample does not match the mixer's"
 msgstr ""
@@ -1127,10 +1345,6 @@ msgstr ""
 msgid "Tile width must exactly divide bitmap width"
 msgstr ""
 
-#: supervisor/shared/safe_mode.c
-msgid "To exit, please reset the board without "
-msgstr ""
-
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Too many channels in sample."
 msgstr ""
@@ -1153,6 +1367,26 @@ msgstr ""
 msgid "Tuple or struct_time argument required"
 msgstr ""
 
+#: ports/stm32f4/common-hal/busio/UART.c
+msgid "UART Buffer allocation error"
+msgstr ""
+
+#: ports/stm32f4/common-hal/busio/UART.c
+msgid "UART De-init error"
+msgstr ""
+
+#: ports/stm32f4/common-hal/busio/UART.c
+msgid "UART Init Error"
+msgstr ""
+
+#: ports/stm32f4/common-hal/busio/UART.c
+msgid "UART Re-init error"
+msgstr ""
+
+#: ports/stm32f4/common-hal/busio/UART.c
+msgid "UART write error"
+msgstr ""
+
 #: shared-module/usb_hid/Device.c
 msgid "USB Busy"
 msgstr ""
@@ -1209,6 +1443,10 @@ msgstr ""
 msgid "Unknown gatt error: 0x%04x"
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid "Unknown reason."
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 #, c-format
 msgid "Unknown security error: 0x%04x"
@@ -1230,7 +1468,7 @@ msgid ""
 "declined or ignored."
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr ""
 
@@ -1264,6 +1502,10 @@ msgstr ""
 msgid "Viper functions don't currently support more than 4 arguments"
 msgstr ""
 
+#: ports/stm32f4/common-hal/microcontroller/Processor.c
+msgid "Voltage read timed out"
+msgstr ""
+
 #: main.c
 msgid "WARNING: Your code filename has two extensions\n"
 msgstr ""
@@ -1278,9 +1520,12 @@ msgid ""
 "To list built-in modules please do `help(\"modules\")`.\n"
 msgstr ""
 
+#: ports/nrf/common-hal/_bleio/PacketBuffer.c
+msgid "Writes not supported on Characteristic"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
-msgid ""
-"You are running in safe mode which means something unanticipated happened.\n"
+msgid "You are in safe mode: something unanticipated happened.\n"
 msgstr ""
 
 #: supervisor/shared/safe_mode.c
@@ -1382,11 +1627,6 @@ msgstr ""
 msgid "branch not in range"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
-msgid "buf is too small. need %d bytes"
-msgstr ""
-
 #: shared-bindings/audiocore/RawSample.c
 msgid "buffer must be a bytes-like object"
 msgstr ""
@@ -1417,8 +1657,7 @@ msgid "byte code not implemented"
 msgstr ""
 
 #: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
-msgid "byteorder is not an instance of ByteOrder (got a %s)"
+msgid "byteorder is not a string"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
@@ -1615,7 +1854,7 @@ msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)"
 msgstr ""
 
 #: shared-bindings/displayio/Palette.c
-msgid "color buffer must be a buffer or int"
+msgid "color buffer must be a buffer, tuple, list, or int"
 msgstr ""
 
 #: shared-bindings/displayio/Palette.c
@@ -1745,7 +1984,7 @@ msgstr ""
 msgid "extra positional arguments given"
 msgstr ""
 
-#: shared-bindings/audiocore/WaveFile.c
+#: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3Decoder.c
 #: shared-bindings/displayio/OnDiskBitmap.c
 msgid "file must be a file opened in byte mode"
 msgstr ""
@@ -1855,6 +2094,7 @@ msgid "incorrect padding"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
+#: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c py/obj.c
 msgid "index out of range"
 msgstr ""
@@ -2098,7 +2338,7 @@ msgstr ""
 msgid "no reset pin available"
 msgstr ""
 
-#: py/runtime.c shared-bindings/_pixelbuf/__init__.c
+#: py/runtime.c
 msgid "no such attribute"
 msgstr ""
 
@@ -2247,6 +2487,7 @@ msgid "pixel_shader must be displayio.Palette or displayio.ColorConverter"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
+#: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 msgid "pop from an empty PulseIn"
 msgstr ""
@@ -2275,14 +2516,6 @@ msgstr ""
 msgid "queue overflow"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "rawbuf is not the same size as buf"
-msgstr ""
-
-#: shared-bindings/_pixelbuf/__init__.c
-msgid "readonly attribute"
-msgstr ""
-
 #: py/builtinimport.c
 msgid "relative import"
 msgstr ""
@@ -2423,12 +2656,8 @@ msgstr ""
 msgid "time.struct_time() takes a 9-sequence"
 msgstr ""
 
-#: shared-bindings/time/__init__.c
-msgid "time.struct_time() takes exactly 1 argument"
-msgstr ""
-
 #: shared-bindings/busio/UART.c
-msgid "timeout >100 (units are now seconds, not msecs)"
+msgid "timeout must be 0.0-100.0 seconds"
 msgstr ""
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
@@ -2460,7 +2689,8 @@ msgstr ""
 msgid "tuple/list required on RHS"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr ""
 
@@ -2518,16 +2748,6 @@ msgstr ""
 msgid "unknown format code '%c' for object of type '%s'"
 msgstr ""
 
-#: py/objstr.c
-#, c-format
-msgid "unknown format code '%c' for object of type 'float'"
-msgstr ""
-
-#: py/objstr.c
-#, c-format
-msgid "unknown format code '%c' for object of type 'str'"
-msgstr ""
-
 #: py/compile.c
 msgid "unknown type"
 msgstr ""
@@ -2588,10 +2808,6 @@ msgstr ""
 msgid "window must be <= interval"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "write_args must be a list, tuple, or None"
-msgstr ""
-
 #: py/objstr.c
 msgid "wrong number of arguments"
 msgstr ""