Merge remote-tracking branch 'upstream/main' into stm32-timer-allocator

1 files changed, 98 insertions, 37 deletions

diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot
index 11ecb99e8..6e32ebab9 100644
--- a/locale/circuitpython.pot
+++ b/locale/circuitpython.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-06-01 17:10-0700\n"
+"POT-Creation-Date: 2020-07-02 15:29+0200\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -58,6 +58,10 @@ msgstr ""
 msgid "%d address pins and %d rgb pins indicate a height of %d, not %d"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+msgid "%q failure: %d"
+msgstr ""
+
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
 msgstr ""
@@ -85,6 +89,10 @@ msgstr ""
 msgid "%q must be a tuple of length 2"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+msgid "%q pin invalid"
+msgstr ""
+
 #: shared-bindings/fontio/BuiltinFont.c
 msgid "%q should be an int"
 msgstr ""
@@ -291,6 +299,7 @@ msgstr ""
 msgid "All timers for this pin are in use"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/_pew/PewPew.c
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
@@ -298,7 +307,7 @@ msgstr ""
 #: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
-#: shared-bindings/pulseio/PWMOut.c shared-module/_pew/PewPew.c
+#: shared-bindings/pulseio/PWMOut.c
 msgid "All timers in use"
 msgstr ""
 
@@ -337,7 +346,7 @@ msgstr ""
 msgid "Array values should be single bytes."
 msgstr ""
 
-#: shared-bindings/rgbmatrix/RGBMatrix.c
+#: shared-bindings/microcontroller/Pin.c
 msgid "At most %d %q may be specified (not %d)"
 msgstr ""
 
@@ -416,6 +425,11 @@ msgstr ""
 msgid "Buffer length %d too big. It must be less than %d"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+msgid "Buffer length must be a multiple of 512"
+msgstr ""
+
 #: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
 msgid "Buffer must be at least length 1"
 msgstr ""
@@ -572,6 +586,14 @@ msgstr ""
 msgid "Corrupt raw code"
 msgstr ""
 
+#: ports/cxd56/common-hal/gnss/GNSS.c
+msgid "Could not initialize GNSS"
+msgstr ""
+
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr ""
@@ -693,7 +715,8 @@ msgstr ""
 msgid "Error in regex"
 msgstr ""
 
-#: shared-bindings/aesio/aes.c shared-bindings/microcontroller/Pin.c
+#: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c
+#: shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c
 #: shared-bindings/terminalio/Terminal.c
 msgid "Expected a %q"
@@ -817,10 +840,6 @@ msgstr ""
 msgid "I2C Init Error"
 msgstr ""
 
-#: extmod/machine_i2c.c
-msgid "I2C operation not supported"
-msgstr ""
-
 #: shared-bindings/aesio/aes.c
 #, c-format
 msgid "IV must be %d bytes long"
@@ -857,6 +876,10 @@ msgstr ""
 msgid "Internal error #%d"
 msgstr ""
 
+#: shared-bindings/sdioio/SDCard.c
+msgid "Invalid %q"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "Invalid %q pin"
@@ -962,9 +985,10 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/I2C.c
 #: ports/atmel-samd/common-hal/busio/SPI.c
 #: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
+#: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
@@ -1357,6 +1381,10 @@ msgstr ""
 msgid "Running in safe mode! Not running saved code.\n"
 msgstr ""
 
+#: shared-module/sdcardio/SDCard.c
+msgid "SD card CSD format not supported"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
@@ -1425,6 +1453,10 @@ msgstr ""
 msgid "Supply at least one UART pin"
 msgstr ""
 
+#: shared-bindings/gnss/GNSS.c
+msgid "System entry must be gnss.SatelliteSystem"
+msgstr ""
+
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Temperature read timed out"
 msgstr ""
@@ -1611,6 +1643,7 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
+#: ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr ""
 
@@ -1720,11 +1753,11 @@ msgstr ""
 msgid "address %08x is not aligned to %d bytes"
 msgstr ""
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "address out of bounds"
 msgstr ""
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "addresses is empty"
 msgstr ""
 
@@ -1805,10 +1838,6 @@ msgstr ""
 msgid "bits must be 7, 8 or 9"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "bits must be 8"
-msgstr ""
-
 #: shared-bindings/audiomixer/Mixer.c
 msgid "bits_per_sample must be 8 or 16"
 msgstr ""
@@ -1834,10 +1863,6 @@ msgstr ""
 msgid "buffer too small"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "buffers must be the same length"
-msgstr ""
-
 #: shared-bindings/_pew/PewPew.c
 msgid "buttons must be digitalio.DigitalInOut"
 msgstr ""
@@ -1913,7 +1938,7 @@ msgstr ""
 msgid "can't convert NaN to int"
 msgstr ""
 
-#: shared-bindings/i2cslave/I2CSlave.c
+#: shared-bindings/i2cperipheral/I2CPeripheral.c
 msgid "can't convert address to int"
 msgstr ""
 
@@ -1981,6 +2006,10 @@ msgstr ""
 msgid "can't send non-None value to a just-started generator"
 msgstr ""
 
+#: shared-module/sdcardio/SDCard.c
+msgid "can't set 512 block size"
+msgstr ""
+
 #: py/objnamedtuple.c
 msgid "can't set attribute"
 msgstr ""
@@ -2107,6 +2136,10 @@ msgstr ""
 msgid "could not invert Vandermonde matrix"
 msgstr ""
 
+#: shared-module/sdcardio/SDCard.c
+msgid "couldn't determine SD card version"
+msgstr ""
+
 #: extmod/ulab/code/approx.c
 msgid "data must be iterable"
 msgstr ""
@@ -2267,10 +2300,6 @@ msgstr ""
 msgid "first argument to super() must be type"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "firstbit must be MSB"
-msgstr ""
-
 #: extmod/ulab/code/ndarray.c
 msgid "flattening order must be either 'C', or 'F'"
 msgstr ""
@@ -2455,14 +2484,6 @@ msgstr ""
 msgid "interval must be in range %s-%s"
 msgstr ""
 
-#: extmod/machine_i2c.c
-msgid "invalid I2C peripheral"
-msgstr ""
-
-#: extmod/machine_spi.c
-msgid "invalid SPI peripheral"
-msgstr ""
-
 #: lib/netutils/netutils.c
 msgid "invalid arguments"
 msgstr ""
@@ -2639,10 +2660,6 @@ msgstr ""
 msgid "must raise an object"
 msgstr ""
 
-#: extmod/machine_spi.c
-msgid "must specify all of sck/mosi/miso"
-msgstr ""
-
 #: py/modbuiltins.c
 msgid "must use keyword argument for key function"
 msgstr ""
@@ -2680,6 +2697,10 @@ msgstr ""
 msgid "negative shift count"
 msgstr ""
 
+#: shared-module/sdcardio/SDCard.c
+msgid "no SD card"
+msgstr ""
+
 #: py/vm.c
 msgid "no active exception to reraise"
 msgstr ""
@@ -2701,6 +2722,10 @@ msgstr ""
 msgid "no reset pin available"
 msgstr ""
 
+#: shared-module/sdcardio/SDCard.c
+msgid "no response from SD card"
+msgstr ""
+
 #: py/runtime.c
 msgid "no such attribute"
 msgstr ""
@@ -2990,6 +3015,10 @@ msgstr ""
 msgid "sleep length must be non-negative"
 msgstr ""
 
+#: extmod/ulab/code/ndarray.c
+msgid "slice step can't be zero"
+msgstr ""
+
 #: py/objslice.c py/sequence.c
 msgid "slice step cannot be zero"
 msgstr ""
@@ -3006,6 +3035,18 @@ msgstr ""
 msgid "sort argument must be an ndarray"
 msgstr ""
 
+#: extmod/ulab/code/filter.c
+msgid "sos array must be of shape (n_section, 6)"
+msgstr ""
+
+#: extmod/ulab/code/filter.c
+msgid "sos[:, 3] should be all ones"
+msgstr ""
+
+#: extmod/ulab/code/filter.c
+msgid "sosfilt requires iterable arguments"
+msgstr ""
+
 #: py/objstr.c
 msgid "start/end indices"
 msgstr ""
@@ -3091,6 +3132,14 @@ msgstr ""
 msgid "timeout must be >= 0.0"
 msgstr ""
 
+#: shared-module/sdcardio/SDCard.c
+msgid "timeout waiting for v1 card"
+msgstr ""
+
+#: shared-module/sdcardio/SDCard.c
+msgid "timeout waiting for v2 card"
+msgstr ""
+
 #: shared-bindings/time/__init__.c
 msgid "timestamp out of range for platform time_t"
 msgstr ""
@@ -3287,3 +3336,15 @@ msgstr ""
 #: py/objrange.c
 msgid "zero step"
 msgstr ""
+
+#: extmod/ulab/code/filter.c
+msgid "zi must be an ndarray"
+msgstr ""
+
+#: extmod/ulab/code/filter.c
+msgid "zi must be of float type"
+msgstr ""
+
+#: extmod/ulab/code/filter.c
+msgid "zi must be of shape (n_section, 2)"
+msgstr ""