Merge branch 'master' into stm32-loader-linkers

1 files changed, 217 insertions, 53 deletions

diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot
index 085101ff1..f85bcba83 100644
--- a/locale/circuitpython.pot
+++ b/locale/circuitpython.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-01-07 14:31-0800\n"
+"POT-Creation-Date: 2020-01-29 17:27-0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -271,6 +271,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
+#: ports/cxd56/common-hal/pulseio/PulseOut.c
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #: ports/nrf/common-hal/pulseio/PulseOut.c shared-bindings/pulseio/PWMOut.c
 #: shared-module/_pew/PewPew.c
@@ -281,6 +282,12 @@ msgstr ""
 msgid "Already advertising."
 msgstr ""
 
+#: ports/cxd56/common-hal/analogio/AnalogIn.c
+msgid "AnalogIn not supported on given pin"
+msgstr ""
+
+#: ports/cxd56/common-hal/analogio/AnalogOut.c
+#: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c
 #: ports/nrf/common-hal/analogio/AnalogOut.c
 msgid "AnalogOut functionality not supported"
 msgstr ""
@@ -294,6 +301,7 @@ msgid "AnalogOut not supported on given pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/pulseio/PulseOut.c
+#: ports/cxd56/common-hal/pulseio/PulseOut.c
 msgid "Another send is already active"
 msgstr ""
 
@@ -405,6 +413,7 @@ msgid "Cannot delete values"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
+#: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c
 #: ports/nrf/common-hal/digitalio/DigitalInOut.c
 msgid "Cannot get pull while in output mode"
 msgstr ""
@@ -434,6 +443,8 @@ msgid "Cannot remount '/' when USB is active."
 msgstr ""
 
 #: ports/atmel-samd/common-hal/microcontroller/__init__.c
+#: ports/cxd56/common-hal/microcontroller/__init__.c
+#: ports/mimxrt10xx/common-hal/microcontroller/__init__.c
 msgid "Cannot reset into bootloader because no bootloader is present."
 msgstr ""
 
@@ -453,6 +464,10 @@ msgstr ""
 msgid "Cannot unambiguously get sizeof scalar"
 msgstr ""
 
+#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+msgid "Cannot vary frequency on a timer that is already in use"
+msgstr ""
+
 #: shared-module/bitbangio/SPI.c
 msgid "Cannot write without MOSI pin."
 msgstr ""
@@ -487,11 +502,8 @@ msgstr ""
 msgid "Column entry must be digitalio.DigitalInOut"
 msgstr ""
 
-#: shared-bindings/displayio/I2CDisplay.c
-msgid "Command must be 0-255"
-msgstr ""
-
-#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/ParallelBus.c
+#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
+#: shared-bindings/displayio/ParallelBus.c
 msgid "Command must be an int between 0 and 255"
 msgstr ""
 
@@ -509,25 +521,53 @@ msgstr ""
 msgid "Corrupt raw code"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr ""
 
-#: shared-module/audiomp3/MP3File.c
+#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+msgid "Could not initialize channel"
+msgstr ""
+
+#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+msgid "Could not initialize timer"
+msgstr ""
+
+#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+msgid "Could not re-init channel"
+msgstr ""
+
+#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+msgid "Could not re-init timer"
+msgstr ""
+
+#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+msgid "Could not restart PWM"
+msgstr ""
+
+#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+msgid "Could not start PWM"
+msgstr ""
+
+#: ports/stm32f4/common-hal/busio/UART.c
+msgid "Could not start interrupt, RX busy"
+msgstr ""
+
+#: shared-module/audiomp3/MP3Decoder.c
 msgid "Couldn't allocate decoder"
 msgstr ""
 
 #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
-#: shared-module/audiomp3/MP3File.c
+#: shared-module/audiomp3/MP3Decoder.c
 msgid "Couldn't allocate first buffer"
 msgstr ""
 
-#: shared-module/audiomp3/MP3File.c
+#: shared-module/audiomp3/MP3Decoder.c
 msgid "Couldn't allocate input buffer"
 msgstr ""
 
 #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
-#: shared-module/audiomp3/MP3File.c
+#: shared-module/audiomp3/MP3Decoder.c
 msgid "Couldn't allocate second buffer"
 msgstr ""
 
@@ -535,6 +575,14 @@ msgstr ""
 msgid "Crash into the HardFault_Handler."
 msgstr ""
 
+#: ports/stm32f4/common-hal/analogio/AnalogOut.c
+msgid "DAC Channel Init Error"
+msgstr ""
+
+#: ports/stm32f4/common-hal/analogio/AnalogOut.c
+msgid "DAC Device Init Error"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "DAC already in use"
 msgstr ""
@@ -560,6 +608,10 @@ msgstr ""
 msgid "Device in use"
 msgstr ""
 
+#: ports/cxd56/common-hal/digitalio/DigitalInOut.c
+msgid "DigitalInOut not supported on given pin"
+msgstr ""
+
 #: shared-bindings/displayio/Display.c
 msgid "Display must have a 16 bit colorspace."
 msgstr ""
@@ -576,6 +628,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/ps2io/Ps2.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
+#: ports/cxd56/common-hal/pulseio/PulseIn.c
 msgid "EXTINT channel already in use"
 msgstr ""
 
@@ -594,10 +647,6 @@ msgstr ""
 msgid "Expected a Characteristic"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/__init__.c
-msgid "Expected a PixelBuf instance"
-msgstr ""
-
 #: shared-bindings/_bleio/Characteristic.c
 msgid "Expected a Service"
 msgstr ""
@@ -625,11 +674,13 @@ msgstr ""
 msgid "Failed to acquire mutex, err 0x%04x"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "Failed to allocate RX buffer"
 msgstr ""
 
+#: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
+#: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 #, c-format
 msgid "Failed to allocate RX buffer of %d bytes"
@@ -643,7 +694,7 @@ msgstr ""
 msgid "Failed to connect: timeout"
 msgstr ""
 
-#: shared-module/audiomp3/MP3File.c
+#: shared-module/audiomp3/MP3Decoder.c
 msgid "Failed to parse MP3 file"
 msgstr ""
 
@@ -660,14 +711,14 @@ msgstr ""
 msgid "File exists"
 msgstr ""
 
-#: ports/nrf/common-hal/nvm/ByteArray.c
-msgid "Flash write failed"
-msgstr ""
-
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr ""
 
+#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+msgid "Frequency must match existing PWMOut using this timer"
+msgstr ""
+
 #: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c
 #: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c
 msgid "Function requires lock"
@@ -682,10 +733,22 @@ msgstr ""
 msgid "Group full"
 msgstr ""
 
+#: ports/stm32f4/common-hal/busio/I2C.c ports/stm32f4/common-hal/busio/SPI.c
+msgid "Hardware busy, try alternative pins"
+msgstr ""
+
+#: ports/stm32f4/common-hal/busio/UART.c
+msgid "Hardware in use, try alternative pins"
+msgstr ""
+
 #: extmod/vfs_posix_file.c py/objstringio.c
 msgid "I/O operation on closed file"
 msgstr ""
 
+#: ports/stm32f4/common-hal/busio/I2C.c
+msgid "I2C Init Error"
+msgstr ""
+
 #: extmod/machine_i2c.c
 msgid "I2C operation not supported"
 msgstr ""
@@ -712,20 +775,46 @@ msgstr ""
 msgid "Insufficient encryption"
 msgstr ""
 
+#: ports/stm32f4/common-hal/busio/UART.c
+msgid "Internal define error"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "Invalid %q pin"
 msgstr ""
 
+#: ports/stm32f4/common-hal/analogio/AnalogIn.c
+msgid "Invalid ADC Unit value"
+msgstr ""
+
 #: shared-module/displayio/OnDiskBitmap.c
 msgid "Invalid BMP file"
 msgstr ""
 
+#: ports/stm32f4/common-hal/analogio/AnalogOut.c
+msgid "Invalid DAC pin supplied"
+msgstr ""
+
+#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/stm32f4/common-hal/busio/I2C.c
+msgid "Invalid I2C pin selection"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/pulseio/PWMOut.c
+#: ports/cxd56/common-hal/pulseio/PWMOut.c
 #: ports/nrf/common-hal/pulseio/PWMOut.c shared-bindings/pulseio/PWMOut.c
 msgid "Invalid PWM frequency"
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm32f4/common-hal/busio/SPI.c
+msgid "Invalid SPI pin selection"
+msgstr ""
+
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+#: ports/stm32f4/common-hal/busio/UART.c
+msgid "Invalid UART pin selection"
+msgstr ""
+
 #: py/moduerrno.c
 msgid "Invalid argument"
 msgstr ""
@@ -734,7 +823,7 @@ msgstr ""
 msgid "Invalid bits per value"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c
+#: ports/nrf/common-hal/busio/UART.c ports/stm32f4/common-hal/busio/UART.c
 msgid "Invalid buffer size"
 msgstr ""
 
@@ -762,6 +851,14 @@ msgstr ""
 msgid "Invalid format chunk size"
 msgstr ""
 
+#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+msgid "Invalid frequency supplied"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c
+msgid "Invalid memory access."
+msgstr ""
+
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
 msgid "Invalid number of bits"
 msgstr ""
@@ -788,7 +885,9 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/SPI.c
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
-#: ports/nrf/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
+#: ports/cxd56/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/stm32f4/common-hal/pulseio/PWMOut.c
 msgid "Invalid pins"
 msgstr ""
 
@@ -820,6 +919,10 @@ msgstr ""
 msgid "Invalid wave file"
 msgstr ""
 
+#: ports/stm32f4/common-hal/busio/UART.c
+msgid "Invalid word/bit length"
+msgstr ""
+
 #: py/compile.c
 msgid "LHS of keyword arg must be an id"
 msgstr ""
@@ -865,10 +968,18 @@ msgstr ""
 msgid "Microphone startup delay must be in range 0.0 to 1.0"
 msgstr ""
 
+#: ports/stm32f4/common-hal/busio/SPI.c
+msgid "Missing MISO or MOSI Pin"
+msgstr ""
+
 #: shared-bindings/displayio/Group.c
 msgid "Must be a %q subclass."
 msgstr ""
 
+#: ports/stm32f4/common-hal/busio/SPI.c
+msgid "Must provide MISO or MOSI pin"
+msgstr ""
+
 #: shared-bindings/_pixelbuf/PixelBuf.c
 msgid "Negative step not supported"
 msgstr ""
@@ -878,6 +989,7 @@ msgid "No CCCD for this Characteristic"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/analogio/AnalogOut.c
+#: ports/stm32f4/common-hal/analogio/AnalogOut.c
 msgid "No DAC on chip"
 msgstr ""
 
@@ -886,11 +998,23 @@ msgstr ""
 msgid "No DMA channel found"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/stm32f4/common-hal/busio/SPI.c
+msgid "No MISO Pin"
+msgstr ""
+
+#: ports/stm32f4/common-hal/busio/SPI.c
+msgid "No MOSI Pin"
+msgstr ""
+
+#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/stm32f4/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/stm32f4/common-hal/busio/UART.c
 msgid "No TX pin"
 msgstr ""
 
@@ -919,6 +1043,10 @@ msgstr ""
 msgid "No hardware support on pin"
 msgstr ""
 
+#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+msgid "No more timers available on this pin."
+msgstr ""
+
 #: shared-module/touchio/TouchIn.c
 msgid "No pulldown on pin; 1Mohm recommended"
 msgstr ""
@@ -985,19 +1113,22 @@ msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr ""
 
+#: ports/stm32f4/common-hal/displayio/ParallelBus.c
+msgid "ParallelBus not yet supported"
+msgstr ""
+
 #: py/moduerrno.c
 msgid "Permission denied"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
+#: ports/cxd56/common-hal/analogio/AnalogIn.c
+#: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
+#: ports/stm32f4/common-hal/analogio/AnalogIn.c
 msgid "Pin does not have ADC capabilities"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "Pixel beyond bounds of buffer"
-msgstr ""
-
 #: py/builtinhelp.c
 msgid "Plus any modules on the filesystem\n"
 msgstr ""
@@ -1018,6 +1149,23 @@ msgstr ""
 msgid "Pull not used when direction is output."
 msgstr ""
 
+#: ports/stm32f4/common-hal/pulseio/PulseIn.c
+msgid "PulseIn not yet supported"
+msgstr ""
+
+#: ports/stm32f4/common-hal/pulseio/PulseOut.c
+msgid "PulseOut not yet supported"
+msgstr ""
+
+#: ports/stm32f4/common-hal/os/__init__.c
+msgid "RNG DeInit Error"
+msgstr ""
+
+#: ports/stm32f4/common-hal/os/__init__.c
+msgid "RNG Init Error"
+msgstr ""
+
+#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c
 #: ports/nrf/common-hal/rtc/RTC.c
 msgid "RTC calibration is not supported on this board"
 msgstr ""
@@ -1026,8 +1174,8 @@ msgstr ""
 msgid "RTC is not supported on this board"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "Range out of bounds"
+#: ports/stm32f4/common-hal/os/__init__.c
+msgid "Random number generation error"
 msgstr ""
 
 #: shared-bindings/pulseio/PulseIn.c
@@ -1066,6 +1214,14 @@ msgstr ""
 msgid "SDA or SCL needs a pull up"
 msgstr ""
 
+#: ports/stm32f4/common-hal/busio/SPI.c
+msgid "SPI Init Error"
+msgstr ""
+
+#: ports/stm32f4/common-hal/busio/SPI.c
+msgid "SPI Re-initialization error"
+msgstr ""
+
 #: shared-bindings/audiomixer/Mixer.c
 msgid "Sample rate must be positive"
 msgstr ""
@@ -1105,6 +1261,10 @@ msgstr ""
 msgid "Stream missing readinto() or write() method."
 msgstr ""
 
+#: ports/stm32f4/common-hal/busio/UART.c
+msgid "Supply at least one UART pin"
+msgstr ""
+
 #: supervisor/shared/safe_mode.c
 msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
@@ -1178,6 +1338,26 @@ msgstr ""
 msgid "Tuple or struct_time argument required"
 msgstr ""
 
+#: ports/stm32f4/common-hal/busio/UART.c
+msgid "UART Buffer allocation error"
+msgstr ""
+
+#: ports/stm32f4/common-hal/busio/UART.c
+msgid "UART De-init error"
+msgstr ""
+
+#: ports/stm32f4/common-hal/busio/UART.c
+msgid "UART Init Error"
+msgstr ""
+
+#: ports/stm32f4/common-hal/busio/UART.c
+msgid "UART Re-init error"
+msgstr ""
+
+#: ports/stm32f4/common-hal/busio/UART.c
+msgid "UART write error"
+msgstr ""
+
 #: shared-module/usb_hid/Device.c
 msgid "USB Busy"
 msgstr ""
@@ -1259,7 +1439,7 @@ msgid ""
 "declined or ignored."
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/I2C.c
+#: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr ""
 
@@ -1414,11 +1594,6 @@ msgstr ""
 msgid "branch not in range"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-#, c-format
-msgid "buf is too small. need %d bytes"
-msgstr ""
-
 #: shared-bindings/audiocore/RawSample.c
 msgid "buffer must be a bytes-like object"
 msgstr ""
@@ -1776,7 +1951,7 @@ msgstr ""
 msgid "extra positional arguments given"
 msgstr ""
 
-#: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3File.c
+#: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3Decoder.c
 #: shared-bindings/displayio/OnDiskBitmap.c
 msgid "file must be a file opened in byte mode"
 msgstr ""
@@ -1886,6 +2061,7 @@ msgid "incorrect padding"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
+#: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c py/obj.c
 msgid "index out of range"
 msgstr ""
@@ -2278,6 +2454,7 @@ msgid "pixel_shader must be displayio.Palette or displayio.ColorConverter"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
+#: ports/cxd56/common-hal/pulseio/PulseIn.c
 #: ports/nrf/common-hal/pulseio/PulseIn.c
 msgid "pop from an empty PulseIn"
 msgstr ""
@@ -2306,10 +2483,6 @@ msgstr ""
 msgid "queue overflow"
 msgstr ""
 
-#: shared-bindings/_pixelbuf/PixelBuf.c
-msgid "rawbuf is not the same size as buf"
-msgstr ""
-
 #: py/builtinimport.c
 msgid "relative import"
 msgstr ""
@@ -2483,7 +2656,8 @@ msgstr ""
 msgid "tuple/list required on RHS"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr ""
 
@@ -2541,16 +2715,6 @@ msgstr ""
 msgid "unknown format code '%c' for object of type '%s'"
 msgstr ""
 
-#: py/objstr.c
-#, c-format
-msgid "unknown format code '%c' for object of type 'float'"
-msgstr ""
-
-#: py/objstr.c
-#, c-format
-msgid "unknown format code '%c' for object of type 'str'"
-msgstr ""
-
 #: py/compile.c
 msgid "unknown type"
 msgstr ""