Merge branch 'main' into type_hints

16 files changed, 595 insertions, 457 deletions

diff --git a/locale/ID.po b/locale/ID.po
index da4f7b904..9e10156e6 100644
--- a/locale/ID.po
+++ b/locale/ID.po
@@ -1,27 +1,28 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+# SPDX-FileCopyrightText: 2014 MicroPython & CircuitPython contributors (https://github.com/adafruit/circuitpython/graphs/contributors)
 #
-#, fuzzy
+# SPDX-License-Identifier: MIT
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-07-01 10:33-0500\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"POT-Creation-Date: 2020-07-07 14:38-0500\n"
+"PO-Revision-Date: 2020-07-06 18:10+0000\n"
+"Last-Translator: oon arfiandwi <oon.arfiandwi@gmail.com>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
+"Language: ID\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"X-Generator: Weblate 4.2-dev\n"
 
 #: main.c
 msgid ""
 "\n"
 "Code done running. Waiting for reload.\n"
 msgstr ""
+"\n"
+"Kode selesai berjalan. Menunggu memuat ulang.\n"
 
 #: supervisor/shared/safe_mode.c
 msgid ""
@@ -29,20 +30,25 @@ msgid ""
 "Please file an issue with the contents of your CIRCUITPY drive at \n"
 "https://github.com/adafruit/circuitpython/issues\n"
 msgstr ""
+"\n"
+"Harap ajukan masalah dengan konten drive CIRCUITPY Anda di\n"
+"https://github.com/adafruit/circuitpython/issues\n"
 
 #: supervisor/shared/safe_mode.c
 msgid ""
 "\n"
 "To exit, please reset the board without "
 msgstr ""
+"\n"
+"Untuk keluar, harap setel ulang papan tanpa"
 
 #: py/obj.c
 msgid "  File \"%q\""
-msgstr ""
+msgstr "  File \"%q\""
 
 #: py/obj.c
 msgid "  File \"%q\", line %d"
-msgstr ""
+msgstr "  File \"%q\", baris %d"
 
 #: main.c
 msgid " output:\n"
@@ -51,12 +57,12 @@ msgstr "output:\n"
 #: py/objstr.c
 #, c-format
 msgid "%%c requires int or char"
-msgstr ""
+msgstr "%%c harus int atau char"
 
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid "%d address pins and %d rgb pins indicate a height of %d, not %d"
-msgstr ""
+msgstr "pin alamat %d dan pin rgb %d menunjukkan tinggi %d, bukan %d"
 
 #: ports/atmel-samd/common-hal/sdioio/SDCard.c
 msgid "%q failure: %d"
@@ -64,39 +70,38 @@ msgstr ""
 
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
-msgstr ""
+msgstr "%q sedang digunakan"
 
 #: py/obj.c
 msgid "%q index out of range"
-msgstr ""
+msgstr "%q indeks di luar batas"
 
 #: py/obj.c
 msgid "%q indices must be integers, not %s"
-msgstr ""
+msgstr "indeks %q harus bilangan bulat, bukan %s"
 
 #: shared-bindings/vectorio/Polygon.c
 msgid "%q list must be a list"
-msgstr ""
+msgstr "daftar %q harus berupa daftar"
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 #: shared-bindings/_bleio/PacketBuffer.c shared-bindings/displayio/Group.c
 #: shared-bindings/displayio/Shape.c shared-bindings/vectorio/Circle.c
 #: shared-bindings/vectorio/Rectangle.c
-#, fuzzy
 msgid "%q must be >= 1"
-msgstr "buffers harus mempunyai panjang yang sama"
+msgstr "%q harus >= 1"
 
 #: shared-module/vectorio/Polygon.c
 msgid "%q must be a tuple of length 2"
-msgstr ""
+msgstr "%q harus berupa tuple dengan panjang 2"
 
 #: ports/atmel-samd/common-hal/sdioio/SDCard.c
 msgid "%q pin invalid"
-msgstr ""
+msgstr "pin %q tidak valid"
 
 #: shared-bindings/fontio/BuiltinFont.c
 msgid "%q should be an int"
-msgstr ""
+msgstr "%q harus berupa int"
 
 #: py/bc.c py/objnamedtuple.c
 msgid "%q() takes %d positional arguments but %d were given"
@@ -109,7 +114,7 @@ msgstr "'%q' argumen dibutuhkan"
 #: py/emitinlinethumb.c py/emitinlinextensa.c
 #, c-format
 msgid "'%s' expects a label"
-msgstr ""
+msgstr "'%s' mengharapkan sebuah label"
 
 #: py/emitinlinethumb.c py/emitinlinextensa.c
 #, c-format
@@ -149,7 +154,7 @@ msgstr "'%s' mengharapkan {r0, r1, ...}"
 #: py/emitinlinextensa.c
 #, c-format
 msgid "'%s' integer %d is not within range %d..%d"
-msgstr ""
+msgstr "'%s' integer %d tidak dalam kisaran %d..%d"
 
 #: py/emitinlinethumb.c
 #, c-format
@@ -158,53 +163,53 @@ msgstr "'%s' integer 0x%x tidak cukup didalam mask 0x%x"
 
 #: py/runtime.c
 msgid "'%s' object cannot assign attribute '%q'"
-msgstr ""
+msgstr "Objek '%s' tidak dapat menetapkan atribut '%q'"
 
 #: py/proto.c
 msgid "'%s' object does not support '%q'"
-msgstr ""
+msgstr "Objek '%s' tidak mendukung '%q'"
 
 #: py/obj.c
 #, c-format
 msgid "'%s' object does not support item assignment"
-msgstr ""
+msgstr "Objek '%s' tidak mendukung penetapan item"
 
 #: py/obj.c
 #, c-format
 msgid "'%s' object does not support item deletion"
-msgstr ""
+msgstr "Objek '%s' tidak mendukung penghapusan item"
 
 #: py/runtime.c
 msgid "'%s' object has no attribute '%q'"
-msgstr ""
+msgstr "Objek '%s' tidak memiliki atribut '%q'"
 
 #: py/runtime.c
 #, c-format
 msgid "'%s' object is not an iterator"
-msgstr ""
+msgstr "Objek '%s' bukan iterator"
 
 #: py/objtype.c py/runtime.c
 #, c-format
 msgid "'%s' object is not callable"
-msgstr ""
+msgstr "Objek '%s' tidak dapat dipanggil"
 
 #: py/runtime.c
 #, c-format
 msgid "'%s' object is not iterable"
-msgstr ""
+msgstr "'%s' objek tidak dapat diulang"
 
 #: py/obj.c
 #, c-format
 msgid "'%s' object is not subscriptable"
-msgstr ""
+msgstr "Objek '%s' tidak dapat disubkripsikan"
 
 #: py/objstr.c
 msgid "'=' alignment not allowed in string format specifier"
-msgstr ""
+msgstr "'=' perataan tidak diizinkan dalam penentu format string"
 
 #: shared-module/struct/__init__.c
 msgid "'S' and 'O' are not supported format types"
-msgstr ""
+msgstr "'S' dan 'O' bukan tipe format yang didukung"
 
 #: py/compile.c
 msgid "'align' requires 1 argument"
@@ -212,7 +217,7 @@ msgstr "'align' membutuhkan 1 argumen"
 
 #: py/compile.c
 msgid "'async for' or 'async with' outside async function"
-msgstr ""
+msgstr "'async for' atau 'async with' di luar fungsi async"
 
 #: py/compile.c
 msgid "'await' outside function"
@@ -252,15 +257,15 @@ msgstr "*x harus menjadi target assignment"
 
 #: py/obj.c
 msgid ", in %q\n"
-msgstr ""
+msgstr ", dalam %q\n"
 
 #: py/objcomplex.c
 msgid "0.0 to a complex power"
-msgstr ""
+msgstr "0.0 ke kompleks berpangkat"
 
 #: py/modbuiltins.c
 msgid "3-arg pow() not supported"
-msgstr ""
+msgstr "pow() 3-arg tidak didukung"
 
 #: ports/atmel-samd/common-hal/countio/Counter.c
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
@@ -268,13 +273,13 @@ msgid "A hardware interrupt channel is already in use"
 msgstr "Sebuah channel hardware interrupt sedang digunakan"
 
 #: shared-bindings/_bleio/Address.c
-#, fuzzy, c-format
+#, c-format
 msgid "Address must be %d bytes long"
-msgstr "buffers harus mempunyai panjang yang sama"
+msgstr "Alamat harus sepanjang %d byte"
 
 #: shared-bindings/_bleio/Address.c
 msgid "Address type out of range"
-msgstr ""
+msgstr "Jenis alamat di luar batas"
 
 #: ports/nrf/common-hal/busio/I2C.c
 msgid "All I2C peripherals are in use"
@@ -285,9 +290,8 @@ msgid "All SPI peripherals are in use"
 msgstr "Semua perangkat SPI sedang digunakan"
 
 #: ports/nrf/common-hal/busio/UART.c
-#, fuzzy
 msgid "All UART peripherals are in use"
-msgstr "Semua perangkat I2C sedang digunakan"
+msgstr "Semua perangkat UART sedang digunakan"
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "All event channels in use"
@@ -315,11 +319,11 @@ msgstr "Semua timer sedang digunakan"
 
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Already advertising."
-msgstr ""
+msgstr "Sudah disebarkan."
 
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 msgid "AnalogIn not supported on given pin"
-msgstr ""
+msgstr "AnalogIn tidak didukung pada pin yang diberikan"
 
 #: ports/cxd56/common-hal/analogio/AnalogOut.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c
@@ -329,7 +333,7 @@ msgstr "fungsionalitas AnalogOut tidak didukung"
 
 #: shared-bindings/analogio/AnalogOut.c
 msgid "AnalogOut is only 16 bits. Value must be less than 65536."
-msgstr ""
+msgstr "AnalogOut hanya 16 bit. Nilai harus kurang dari 65536."
 
 #: ports/atmel-samd/common-hal/analogio/AnalogOut.c
 msgid "AnalogOut not supported on given pin"
@@ -342,19 +346,19 @@ msgstr "Send yang lain sudah aktif"
 
 #: shared-bindings/pulseio/PulseOut.c
 msgid "Array must contain halfwords (type 'H')"
-msgstr ""
+msgstr "Array harus mengandung halfwords (ketik 'H')"
 
 #: shared-bindings/nvm/ByteArray.c
 msgid "Array values should be single bytes."
-msgstr ""
+msgstr "Nilai array harus berupa byte tunggal."
 
 #: shared-bindings/microcontroller/Pin.c
 msgid "At most %d %q may be specified (not %d)"
-msgstr ""
+msgstr "Paling banyak %d %q dapat ditentukan (bukan %d)"
 
 #: supervisor/shared/safe_mode.c
 msgid "Attempted heap allocation when MicroPython VM not running."
-msgstr ""
+msgstr "Mencoba alokasi heap ketika MicroPython VM tidak berjalan."
 
 #: main.c
 msgid "Auto-reload is off.\n"
@@ -371,7 +375,7 @@ msgstr ""
 #: shared-module/displayio/Display.c
 #: shared-module/framebufferio/FramebufferDisplay.c
 msgid "Below minimum frame rate"
-msgstr ""
+msgstr "Di bawah frame rate minimum"
 
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Bit clock and word select must share a clock unit"
@@ -379,7 +383,7 @@ msgstr "Bit clock dan word harus memiliki kesamaan pada clock unit"
 
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Bit depth must be multiple of 8."
-msgstr ""
+msgstr "Kedalaman bit harus kelipatan 8."
 
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Both RX and TX required for flow control"
@@ -393,89 +397,89 @@ msgstr "Kedua pin harus mendukung hardware interrut"
 #: shared-bindings/framebufferio/FramebufferDisplay.c
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 msgid "Brightness must be 0-1.0"
-msgstr ""
+msgstr "Kecerahan harus di antara 0-1.0"
 
 #: shared-bindings/supervisor/__init__.c
 msgid "Brightness must be between 0 and 255"
-msgstr ""
+msgstr "Brightness harus di antara 0 dan 255"
 
 #: shared-bindings/displayio/Display.c
 #: shared-bindings/framebufferio/FramebufferDisplay.c
 msgid "Brightness not adjustable"
-msgstr ""
+msgstr "Brightness tidak bisa disesuaikan"
 
 #: shared-bindings/_bleio/UUID.c
 #, c-format
 msgid "Buffer + offset too small %d %d %d"
-msgstr ""
+msgstr "Buffer + offset terlalu kecil %d %d %d"
 
 #: shared-module/usb_hid/Device.c
 #, c-format
 msgid "Buffer incorrect size. Should be %d bytes."
-msgstr ""
+msgstr "Ukuran buffer salah. Seharusnya %d byte."
 
 #: shared-bindings/displayio/Display.c
 #: shared-bindings/framebufferio/FramebufferDisplay.c
 msgid "Buffer is not a bytearray."
-msgstr ""
+msgstr "Buffer bukan bytearray."
 
 #: shared-bindings/displayio/Display.c
 #: shared-bindings/framebufferio/FramebufferDisplay.c
 msgid "Buffer is too small"
-msgstr ""
+msgstr "Buffer terlalu kecil"
 
 #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
 #, c-format
 msgid "Buffer length %d too big. It must be less than %d"
-msgstr ""
+msgstr "Panjang buffer %d terlalu besar. Itu harus kurang dari %d"
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
-msgstr ""
+msgstr "Panjang buffer harus kelipatan 512"
 
 #: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
 msgid "Buffer must be at least length 1"
-msgstr ""
+msgstr "Penyangga harus memiliki panjang setidaknya 1"
 
 #: ports/nrf/common-hal/_bleio/PacketBuffer.c
 msgid "Buffer too large and unable to allocate"
-msgstr ""
+msgstr "Buffer terlalu besar dan tidak dapat dialokasikan"
 
 #: shared-bindings/_bleio/PacketBuffer.c
 #, c-format
 msgid "Buffer too short by %d bytes"
-msgstr ""
+msgstr "Buffer terlalu pendek untuk %d byte"
 
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
-#, fuzzy, c-format
+#, c-format
 msgid "Bus pin %d is already in use"
-msgstr "DAC sudah digunakan"
+msgstr "Pin bus %d sudah digunakan"
 
 #: shared-bindings/_bleio/UUID.c
-#, fuzzy
 msgid "Byte buffer must be 16 bytes."
-msgstr "buffers harus mempunyai panjang yang sama"
+msgstr "Byte buffer harus 16 byte."
 
 #: shared-bindings/nvm/ByteArray.c
 msgid "Bytes must be between 0 and 255."
-msgstr ""
+msgstr "Bytes harus di antara 0 dan 255."
 
 #: shared-bindings/aesio/aes.c
 msgid "CBC blocks must be multiples of 16 bytes"
-msgstr ""
+msgstr "Blok CBC harus merupakan kelipatan 16 byte"
 
 #: py/objtype.c
 msgid "Call super().__init__() before accessing native object."
-msgstr ""
+msgstr "Panggil super().__init__() sebelum mengakses objek asli."
 
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "Can't set CCCD on local Characteristic"
-msgstr ""
+msgstr "Tidak dapat mengatur CCCD pada Karakteristik lokal"
 
 #: shared-bindings/displayio/Bitmap.c shared-bindings/pulseio/PulseIn.c
 msgid "Cannot delete values"
-msgstr ""
+msgstr "Tidak dapat menghapus nilai"
 
 #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
 #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c
@@ -484,13 +488,14 @@ msgid "Cannot get pull while in output mode"
 msgstr "Tidak bisa mendapatkan pull pada saat mode output"
 
 #: ports/nrf/common-hal/microcontroller/Processor.c
-#, fuzzy
 msgid "Cannot get temperature"
-msgstr "Tidak bisa mendapatkan temperatur. status: 0x%02x"
+msgstr "Tidak bisa mendapatkan suhu"
 
 #: shared-bindings/_bleio/Adapter.c
 msgid "Cannot have scan responses for extended, connectable advertisements."
 msgstr ""
+"Tidak dapat memiliki respon pindaian untuk penyebaran yang terhubung dan "
+"diperluas."
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
@@ -500,15 +505,15 @@ msgstr ""
 
 #: shared-module/bitbangio/SPI.c
 msgid "Cannot read without MISO pin."
-msgstr ""
+msgstr "Tidak dapat membaca tanpa pin MISO."
 
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Cannot record to a file"
-msgstr ""
+msgstr "Tidak dapat merekam ke file"
 
 #: shared-module/storage/__init__.c
 msgid "Cannot remount '/' when USB is active."
-msgstr ""
+msgstr "Tidak dapat memasang kembali '/' ketika USB aktif."
 
 #: ports/atmel-samd/common-hal/microcontroller/__init__.c
 #: ports/cxd56/common-hal/microcontroller/__init__.c
@@ -520,19 +525,19 @@ msgstr ""
 
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Cannot set value when direction is input."
-msgstr ""
+msgstr "Tidak dapat menetapkan nilai saat arah input."
 
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Cannot specify RTS or CTS in RS485 mode"
-msgstr ""
+msgstr "Tidak dapat menentukan RTS atau CTS dalam mode RS485"
 
 #: py/objslice.c
 msgid "Cannot subclass slice"
-msgstr ""
+msgstr "Tidak dapat membuat subkelas dari irisan"
 
 #: shared-module/bitbangio/SPI.c
 msgid "Cannot transfer without MOSI and MISO pins."
-msgstr ""
+msgstr "Tidak dapat transfer tanpa pin MOSI dan MISO."
 
 #: extmod/moductypes.c
 msgid "Cannot unambiguously get sizeof scalar"
@@ -541,32 +546,36 @@ msgstr "tidak dapat mendapatkan ukuran scalar secara tidak ambigu"
 #: ports/stm/common-hal/pulseio/PWMOut.c
 msgid "Cannot vary frequency on a timer that is already in use"
 msgstr ""
+"Tidak dapat membuat variasi frekuensi pada penghitung waktu yang sudah "
+"digunakan"
 
 #: shared-module/bitbangio/SPI.c
 msgid "Cannot write without MOSI pin."
-msgstr ""
+msgstr "Tidak dapat menulis tanpa pin MOSI."
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "CharacteristicBuffer writing not provided"
-msgstr ""
+msgstr "Menulis CharacteristicBuffer tidak tersedia"
 
 #: supervisor/shared/safe_mode.c
 msgid "CircuitPython core code crashed hard. Whoops!\n"
-msgstr ""
+msgstr "Kode inti CircuitPython mengalami crash. Aduh!\n"
 
 #: supervisor/shared/safe_mode.c
 msgid ""
 "CircuitPython is in safe mode because you pressed the reset button during "
 "boot. Press again to exit safe mode.\n"
 msgstr ""
+"CircuitPython dalam mode aman karena Anda menekan tombol reset saat boot. "
+"Tekan lagi untuk keluar dari mode aman.\n"
 
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
-msgstr ""
+msgstr "Init pin clock gagal."
 
 #: shared-module/bitbangio/I2C.c
 msgid "Clock stretch too long"
-msgstr ""
+msgstr "Peregangan clock terlalu panjang"
 
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Clock unit in use"
@@ -574,92 +583,97 @@ msgstr "Clock unit sedang digunakan"
 
 #: shared-bindings/_pew/PewPew.c
 msgid "Column entry must be digitalio.DigitalInOut"
-msgstr ""
+msgstr "Entri kolom harus digitalio.DigitalInOut"
 
 #: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
 #: shared-bindings/displayio/ParallelBus.c
 msgid "Command must be an int between 0 and 255"
-msgstr ""
+msgstr "Perintah harus berupa int di antara 0 dan 255"
 
 #: shared-bindings/_bleio/Connection.c
 msgid ""
 "Connection has been disconnected and can no longer be used. Create a new "
 "connection."
 msgstr ""
+"Koneksi telah terputus dan tidak dapat lagi digunakan. Buat koneksi baru."
 
 #: py/persistentcode.c
 msgid "Corrupt .mpy file"
-msgstr ""
+msgstr "File .mpy rusak"
 
 #: py/emitglue.c
 msgid "Corrupt raw code"
-msgstr ""
+msgstr "Kode raw rusak"
 
 #: ports/cxd56/common-hal/gnss/GNSS.c
 msgid "Could not initialize GNSS"
 msgstr ""
 
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Tidak dapat menginisialisasi UART"
 
 #: ports/stm/common-hal/pulseio/PWMOut.c
 msgid "Could not initialize channel"
-msgstr ""
+msgstr "Tidak dapat menginisialisasi kanal"
 
 #: ports/stm/common-hal/pulseio/PWMOut.c
 msgid "Could not initialize timer"
-msgstr ""
+msgstr "Tidak dapat menginisialisasi timer"
 
 #: ports/stm/common-hal/pulseio/PWMOut.c
 msgid "Could not re-init channel"
-msgstr ""
+msgstr "Tidak dapat menginisialisasi ulang kanal"
 
 #: ports/stm/common-hal/pulseio/PWMOut.c
 msgid "Could not re-init timer"
-msgstr ""
+msgstr "Tidak dapat menginisialisasi ulang timer"
 
 #: ports/stm/common-hal/pulseio/PWMOut.c
 msgid "Could not restart PWM"
-msgstr ""
+msgstr "Tidak dapat memulai ulang PWM"
 
 #: ports/stm/common-hal/pulseio/PWMOut.c
 msgid "Could not start PWM"
-msgstr ""
+msgstr "Tidak dapat memulai PWM"
 
 #: ports/stm/common-hal/busio/UART.c
 msgid "Could not start interrupt, RX busy"
-msgstr ""
+msgstr "Tidak dapat memulai interupsi, RX sibuk"
 
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Couldn't allocate decoder"
-msgstr ""
+msgstr "Tidak dapat mengalokasikan dekoder"
 
 #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Couldn't allocate first buffer"
-msgstr ""
+msgstr "Tidak dapat mengalokasikan penyangga pertama"
 
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Couldn't allocate input buffer"
-msgstr ""
+msgstr "Tidak dapat mengalokasikan penyangga masukan"
 
 #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Couldn't allocate second buffer"
-msgstr ""
+msgstr "Tidak dapat mengalokasikan penyangga kedua"
 
 #: supervisor/shared/safe_mode.c
 msgid "Crash into the HardFault_Handler."
-msgstr ""
+msgstr "Gagal ke HardFault_Handler."
 
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "DAC Channel Init Error"
-msgstr ""
+msgstr "Terjadi kesalahan saat menginisialisasi kanal DAC"
 
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "DAC Device Init Error"
-msgstr ""
+msgstr "Terjadi kesalahan saat menginisialisasi perangkat DAC"
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "DAC already in use"
@@ -668,11 +682,11 @@ msgstr "DAC sudah digunakan"
 #: ports/atmel-samd/common-hal/displayio/ParallelBus.c
 #: ports/nrf/common-hal/displayio/ParallelBus.c
 msgid "Data 0 pin must be byte aligned"
-msgstr ""
+msgstr "Data 0 pin harus byte disejajarkan"
 
 #: shared-module/audiocore/WaveFile.c
 msgid "Data chunk must follow fmt chunk"
-msgstr ""
+msgstr "Potongan data harus mengikuti fmt chunk"
 
 #: ports/nrf/common-hal/_bleio/Adapter.c
 #, fuzzy
@@ -681,34 +695,34 @@ msgstr "Tidak bisa menyesuaikan data ke dalam paket advertisment"
 
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Destination capacity is smaller than destination_length."
-msgstr ""
+msgstr "Kapasitas tujuan lebih kecil dari destination_length."
 
 #: ports/nrf/common-hal/audiobusio/I2SOut.c
 msgid "Device in use"
-msgstr ""
+msgstr "Perangkat sedang digunakan"
 
 #: ports/cxd56/common-hal/digitalio/DigitalInOut.c
 msgid "DigitalInOut not supported on given pin"
-msgstr ""
+msgstr "DigitalInOut tidak didukung pada pin yang diberikan"
 
 #: shared-bindings/displayio/Display.c
 #: shared-bindings/framebufferio/FramebufferDisplay.c
 msgid "Display must have a 16 bit colorspace."
-msgstr ""
+msgstr "Tampilan harus memiliki ruang warna 16 bit."
 
 #: shared-bindings/displayio/Display.c
 #: shared-bindings/displayio/EPaperDisplay.c
 #: shared-bindings/framebufferio/FramebufferDisplay.c
 msgid "Display rotation must be in 90 degree increments"
-msgstr ""
+msgstr "Rotasi tampilan harus dalam kelipatan 90 derajat"
 
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Drive mode not used when direction is input."
-msgstr ""
+msgstr "Mode kendara tidak digunakan saat arah input."
 
 #: shared-bindings/aesio/aes.c
 msgid "ECB only operates on 16 bytes at a time"
-msgstr ""
+msgstr "ECB hanya beroperasi pada 16 byte di satu waktu"
 
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 #: ports/atmel-samd/common-hal/ps2io/Ps2.c
@@ -726,42 +740,42 @@ msgstr "Error pada regex"
 #: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c
 #: shared-bindings/terminalio/Terminal.c
 msgid "Expected a %q"
-msgstr ""
+msgstr "Diharapkan %q"
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 #: shared-bindings/_bleio/Descriptor.c shared-bindings/_bleio/PacketBuffer.c
 msgid "Expected a Characteristic"
-msgstr ""
+msgstr "Diharapkan sebuah Karakteristik"
 
 #: shared-bindings/_bleio/Characteristic.c
 msgid "Expected a Service"
-msgstr ""
+msgstr "Diharapkan sebuah Layanan"
 
 #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
 #: shared-bindings/_bleio/Service.c
 msgid "Expected a UUID"
-msgstr ""
+msgstr "Diharapkan sebuah UUID"
 
 #: shared-bindings/_bleio/Adapter.c
 msgid "Expected an Address"
-msgstr ""
+msgstr "Diharapkan sebuah Alamat"
 
 #: shared-module/_pixelbuf/PixelBuf.c
 #, c-format
 msgid "Expected tuple of length %d, got %d"
-msgstr ""
+msgstr "Diharapkan tuple dengan panjang %d, didapatkan %d"
 
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Extended advertisements with scan response not supported."
-msgstr ""
+msgstr "Penyebaran yang diperluas dengan respon pindai tidak didukung."
 
 #: extmod/ulab/code/fft.c
 msgid "FFT is defined for ndarrays only"
-msgstr ""
+msgstr "FFT didefinisikan hanya untuk ndarrays"
 
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
-msgstr ""
+msgstr "Gagal mengirim perintah."
 
 #: ports/nrf/sd_mutex.c
 #, fuzzy, c-format
@@ -783,15 +797,15 @@ msgstr "Gagal untuk megalokasikan buffer RX dari %d byte"
 
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: internal error"
-msgstr ""
+msgstr "Gagal terhubung: kesalahan internal"
 
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Failed to connect: timeout"
-msgstr ""
+msgstr "Gagal terhubung: habis waktu"
 
 #: shared-module/audiomp3/MP3Decoder.c
 msgid "Failed to parse MP3 file"
-msgstr ""
+msgstr "Gagal mengurai file MP3"
 
 #: ports/nrf/sd_mutex.c
 #, fuzzy, c-format
@@ -800,43 +814,44 @@ msgstr "Gagal untuk melepaskan mutex, status: 0x%08lX"
 
 #: supervisor/shared/safe_mode.c
 msgid "Failed to write internal flash."
-msgstr ""
+msgstr "Gagal menulis flash internal."
 
 #: py/moduerrno.c
 msgid "File exists"
-msgstr ""
+msgstr "File sudah ada"
 
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Frequency captured is above capability. Capture Paused."
 msgstr ""
+"Frekuensi yang ditangkap berada di atas kemampuan. Penangkapan Ditunda."
 
 #: ports/stm/common-hal/pulseio/PWMOut.c
 msgid "Frequency must match existing PWMOut using this timer"
-msgstr ""
+msgstr "Frekuensi harus cocok dengan PWMOut yang ada menggunakan timer ini"
 
 #: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c
 #: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c
 msgid "Function requires lock"
-msgstr ""
+msgstr "Fungsinya membutuhkan kunci"
 
 #: shared-bindings/displayio/Display.c
 #: shared-bindings/displayio/EPaperDisplay.c
 #: shared-bindings/framebufferio/FramebufferDisplay.c
 msgid "Group already used"
-msgstr ""
+msgstr "Grup sudah digunakan"
 
 #: shared-module/displayio/Group.c
 msgid "Group full"
-msgstr ""
+msgstr "Grup penuh"
 
 #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
 #: ports/stm/common-hal/busio/SPI.c
 msgid "Hardware busy, try alternative pins"
-msgstr ""
+msgstr "Perangkat keras sibuk, coba pin alternatif"
 
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
-msgstr ""
+msgstr "Perangkat keras sedang digunakan, coba pin alternatif"
 
 #: extmod/vfs_posix_file.c py/objstringio.c
 msgid "I/O operation on closed file"
@@ -844,43 +859,45 @@ msgstr "operasi I/O pada file tertutup"
 
 #: ports/stm/common-hal/busio/I2C.c
 msgid "I2C Init Error"
-msgstr ""
+msgstr "Gagal Inisialisasi I2C"
 
 #: shared-bindings/aesio/aes.c
 #, c-format
 msgid "IV must be %d bytes long"
-msgstr ""
+msgstr "Panjang IV harus %d byte"
 
 #: py/persistentcode.c
 msgid ""
 "Incompatible .mpy file. Please update all .mpy files. See http://adafru.it/"
 "mpy-update for more info."
 msgstr ""
+"File .mpy tidak kompatibel. Perbarui semua file .mpy. Lihat http://adafru.it/"
+"mpy-update untuk info lebih lanjut."
 
 #: shared-bindings/_pew/PewPew.c
 msgid "Incorrect buffer size"
-msgstr ""
+msgstr "Ukuran penyangga salah"
 
 #: py/moduerrno.c
 msgid "Input/output error"
-msgstr ""
+msgstr "Kesalahan input/output"
 
 #: ports/nrf/common-hal/_bleio/__init__.c
 msgid "Insufficient authentication"
-msgstr ""
+msgstr "Otentikasi tidak cukup"
 
 #: ports/nrf/common-hal/_bleio/__init__.c
 msgid "Insufficient encryption"
-msgstr ""
+msgstr "Enkripsi tidak cukup"
 
 #: ports/stm/common-hal/busio/UART.c
 msgid "Internal define error"
-msgstr ""
+msgstr "Kesalahan definisi internal"
 
 #: shared-module/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid "Internal error #%d"
-msgstr ""
+msgstr "Kesalahan internal #%d"
 
 #: shared-bindings/sdioio/SDCard.c
 msgid "Invalid %q"
@@ -893,19 +910,19 @@ msgstr "%q pada tidak valid"
 
 #: ports/stm/common-hal/analogio/AnalogIn.c
 msgid "Invalid ADC Unit value"
-msgstr ""
+msgstr "Nilai Unit ADC tidak valid"
 
 #: shared-module/displayio/OnDiskBitmap.c
 msgid "Invalid BMP file"
-msgstr ""
+msgstr "File BMP tidak valid"
 
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "Invalid DAC pin supplied"
-msgstr ""
+msgstr "Pin DAC yang diberikan tidak valid"
 
 #: ports/stm/common-hal/busio/I2C.c
 msgid "Invalid I2C pin selection"
-msgstr ""
+msgstr "Pilihan pin I2C tidak valid"
 
 #: ports/atmel-samd/common-hal/pulseio/PWMOut.c
 #: ports/cxd56/common-hal/pulseio/PWMOut.c
@@ -915,19 +932,19 @@ msgstr "Frekuensi PWM tidak valid"
 
 #: ports/stm/common-hal/busio/SPI.c
 msgid "Invalid SPI pin selection"
-msgstr ""
+msgstr "Pilihan pin SPI tidak valid"
 
 #: ports/stm/common-hal/busio/UART.c
 msgid "Invalid UART pin selection"
-msgstr ""
+msgstr "Pilihan pin UART tidak valid"
 
 #: py/moduerrno.c shared-module/rgbmatrix/RGBMatrix.c
 msgid "Invalid argument"
-msgstr ""
+msgstr "Argumen tidak valid"
 
 #: shared-module/displayio/Bitmap.c
 msgid "Invalid bits per value"
-msgstr ""
+msgstr "Bit per nilai tidak valid"
 
 #: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Invalid buffer size"
@@ -935,44 +952,44 @@ msgstr "Ukuran buffer tidak valid"
 
 #: shared-bindings/_pixelbuf/PixelBuf.c
 msgid "Invalid byteorder string"
-msgstr ""
+msgstr "String byteorder tidak valid"
 
 #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
 msgid "Invalid capture period. Valid range: 1 - 500"
-msgstr ""
+msgstr "Periode penangkapan tidak valid. Kisaran yang valid: 1 - 500"
 
 #: shared-bindings/audiomixer/Mixer.c
 msgid "Invalid channel count"
-msgstr ""
+msgstr "Jumlah kanal tidak valid"
 
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Invalid direction."
-msgstr ""
+msgstr "Arah tidak valid."
 
 #: shared-module/audiocore/WaveFile.c
 msgid "Invalid file"
-msgstr ""
+msgstr "File tidak valid"
 
 #: shared-module/audiocore/WaveFile.c
 msgid "Invalid format chunk size"
-msgstr ""
+msgstr "Ukuran potongan format tidak valid"
 
 #: ports/stm/common-hal/pulseio/PWMOut.c
 msgid "Invalid frequency supplied"
-msgstr ""
+msgstr "Frekuensi yang diberikan tidak valid"
 
 #: supervisor/shared/safe_mode.c
 msgid "Invalid memory access."
-msgstr ""
+msgstr "Akses memori tidak valid."
 
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
 msgid "Invalid number of bits"
-msgstr ""
+msgstr "Jumlah bit tidak valid"
 
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
 #: shared-bindings/displayio/FourWire.c
 msgid "Invalid phase"
-msgstr ""
+msgstr "Fase tidak valid"
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 #: ports/atmel-samd/common-hal/touchio/TouchIn.c
@@ -993,7 +1010,8 @@ msgstr "Pin untuk channel kanan tidak valid"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
@@ -1001,44 +1019,44 @@ msgstr "Pin-pin tidak valid"
 
 #: ports/stm/common-hal/pulseio/PWMOut.c
 msgid "Invalid pins for PWMOut"
-msgstr ""
+msgstr "Pin untuk PWMOut tidak valid"
 
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
 #: shared-bindings/displayio/FourWire.c
 msgid "Invalid polarity"
-msgstr ""
+msgstr "Polaritas tidak valid"
 
 #: shared-bindings/_bleio/Characteristic.c
 msgid "Invalid properties"
-msgstr ""
+msgstr "Properti tidak valid"
 
 #: shared-bindings/microcontroller/__init__.c
 msgid "Invalid run mode."
-msgstr ""
+msgstr "Mode operasi tidak valid."
 
 #: shared-module/_bleio/Attribute.c
 msgid "Invalid security_mode"
-msgstr ""
+msgstr "security_mode tidak valid"
 
 #: shared-bindings/audiomixer/Mixer.c
 msgid "Invalid voice"
-msgstr ""
+msgstr "Suara tidak valid"
 
 #: shared-bindings/audiomixer/Mixer.c
 msgid "Invalid voice count"
-msgstr ""
+msgstr "Hitungan suara tidak valid"
 
 #: shared-module/audiocore/WaveFile.c
 msgid "Invalid wave file"
-msgstr ""
+msgstr "File wave tidak valid"
 
 #: ports/stm/common-hal/busio/UART.c
 msgid "Invalid word/bit length"
-msgstr ""
+msgstr "Panjang kata/bit tidak valid"
 
 #: shared-bindings/aesio/aes.c
 msgid "Key must be 16, 24, or 32 bytes long"
-msgstr ""
+msgstr "Panjang kunci harus 16, 24, atau 32 byte"
 
 #: py/compile.c
 msgid "LHS of keyword arg must be an id"
@@ -1046,40 +1064,40 @@ msgstr "LHS dari keyword arg harus menjadi sebuah id"
 
 #: shared-module/displayio/Group.c
 msgid "Layer already in a group."
-msgstr ""
+msgstr "Layer sudah ada dalam grup."
 
 #: shared-module/displayio/Group.c
 msgid "Layer must be a Group or TileGrid subclass."
-msgstr ""
+msgstr "Layer harus sebuah Grup atau subklas dari TileGrid."
 
 #: py/objslice.c
 msgid "Length must be an int"
-msgstr ""
+msgstr "Panjang harus berupa int"
 
 #: py/objslice.c
 msgid "Length must be non-negative"
-msgstr ""
+msgstr "Panjangnya harus non-negatif"
 
 #: shared-module/bitbangio/SPI.c
 msgid "MISO pin init failed."
-msgstr ""
+msgstr "Pin MISO gagal inisialisasi."
 
 #: shared-module/bitbangio/SPI.c
 msgid "MOSI pin init failed."
-msgstr ""
+msgstr "Pin MOSI gagal inisialisasi."
 
 #: shared-module/displayio/Shape.c
 #, c-format
 msgid "Maximum x value when mirrored is %d"
-msgstr ""
+msgstr "Nilai x maksimum ketika dicerminkan adalah %d"
 
 #: supervisor/shared/safe_mode.c
 msgid "MicroPython NLR jump failed. Likely memory corruption."
-msgstr ""
+msgstr "Lompatan NLR MicroPython gagal. Kemungkinan kerusakan memori."
 
 #: supervisor/shared/safe_mode.c
 msgid "MicroPython fatal error."
-msgstr ""
+msgstr "Kesalahan fatal MicroPython."
 
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Microphone startup delay must be in range 0.0 to 1.0"
@@ -1097,6 +1115,10 @@ msgstr ""
 msgid "Must provide MISO or MOSI pin"
 msgstr ""
 
+#: ports/stm/common-hal/busio/SPI.c
+msgid "Must provide SCK pin"
+msgstr ""
+
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid "Must use a multiple of 6 rgb pins, not %d"
diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot
index 7141cc872..6bdc91bf1 100644
--- a/locale/circuitpython.pot
+++ b/locale/circuitpython.pot
@@ -1,14 +1,12 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+# SPDX-FileCopyrightText: 2014 MicroPython & CircuitPython contributors (https://github.com/adafruit/circuitpython/graphs/contributors)
 #
-#, fuzzy
+# SPDX-License-Identifier: MIT
+
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-07-01 10:33-0500\n"
+"POT-Creation-Date: 2020-07-07 14:38-0500\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -425,7 +423,8 @@ msgstr ""
 msgid "Buffer length %d too big. It must be less than %d"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
 msgstr ""
 
@@ -589,6 +588,10 @@ msgstr ""
 msgid "Could not initialize GNSS"
 msgstr ""
 
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr ""
@@ -982,7 +985,8 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
@@ -1086,6 +1090,10 @@ msgstr ""
 msgid "Must provide MISO or MOSI pin"
 msgstr ""
 
+#: ports/stm/common-hal/busio/SPI.c
+msgid "Must provide SCK pin"
+msgstr ""
+
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid "Must use a multiple of 6 rgb pins, not %d"
diff --git a/locale/cs.po b/locale/cs.po
index 902998539..d09cf1e94 100644
--- a/locale/cs.po
+++ b/locale/cs.po
@@ -1,13 +1,11 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+# SPDX-FileCopyrightText: 2014 MicroPython & CircuitPython contributors (https://github.com/adafruit/circuitpython/graphs/contributors)
 #
+# SPDX-License-Identifier: MIT
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-07-01 10:33-0500\n"
+"POT-Creation-Date: 2020-07-07 14:38-0500\n"
 "PO-Revision-Date: 2020-05-24 03:22+0000\n"
 "Last-Translator: dronecz <mzuzelka@gmail.com>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -433,7 +431,8 @@ msgstr ""
 msgid "Buffer length %d too big. It must be less than %d"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
 msgstr ""
 
@@ -597,6 +596,10 @@ msgstr ""
 msgid "Could not initialize GNSS"
 msgstr ""
 
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr ""
@@ -990,7 +993,8 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
@@ -1094,6 +1098,10 @@ msgstr ""
 msgid "Must provide MISO or MOSI pin"
 msgstr ""
 
+#: ports/stm/common-hal/busio/SPI.c
+msgid "Must provide SCK pin"
+msgstr ""
+
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid "Must use a multiple of 6 rgb pins, not %d"
diff --git a/locale/de_DE.po b/locale/de_DE.po
index 3b7c49b39..1e168db52 100644
--- a/locale/de_DE.po
+++ b/locale/de_DE.po
@@ -1,13 +1,11 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+# SPDX-FileCopyrightText: 2014 MicroPython & CircuitPython contributors (https://github.com/adafruit/circuitpython/graphs/contributors)
 #
+# SPDX-License-Identifier: MIT
 msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-07-01 10:33-0500\n"
+"POT-Creation-Date: 2020-07-07 14:38-0500\n"
 "PO-Revision-Date: 2020-06-16 18:24+0000\n"
 "Last-Translator: Andreas Buchen <andreas.buchen@gmail.com>\n"
 "Language: de_DE\n"
@@ -436,7 +434,8 @@ msgstr "Der Puffer ist zu klein"
 msgid "Buffer length %d too big. It must be less than %d"
 msgstr "Die Pufferlänge %d ist zu groß. Sie muss kleiner als %d sein"
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
 msgstr ""
 
@@ -607,6 +606,10 @@ msgstr "Beschädigter raw code"
 msgid "Could not initialize GNSS"
 msgstr ""
 
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Konnte UART nicht initialisieren"
@@ -1007,7 +1010,8 @@ msgstr "Ungültiger Pin für rechten Kanal"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
@@ -1113,6 +1117,10 @@ msgstr "Muss eine %q Unterklasse sein."
 msgid "Must provide MISO or MOSI pin"
 msgstr "Muss MISO- oder MOSI-Pin bereitstellen"
 
+#: ports/stm/common-hal/busio/SPI.c
+msgid "Must provide SCK pin"
+msgstr ""
+
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid "Must use a multiple of 6 rgb pins, not %d"
diff --git a/locale/en_US.po b/locale/en_US.po
index c89772779..de9fa6347 100644
--- a/locale/en_US.po
+++ b/locale/en_US.po
@@ -1,8 +1,7 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+# SPDX-FileCopyrightText: 2014 MicroPython & CircuitPython contributors (https://github.com/adafruit/circuitpython/graphs/contributors)
 #
+# SPDX-License-Identifier: MIT
+
 msgid ""
 msgstr ""
 "Project-Id-Version: \n"
diff --git a/locale/en_x_pirate.po b/locale/en_x_pirate.po
index 16f2b3669..40b0b314c 100644
--- a/locale/en_x_pirate.po
+++ b/locale/en_x_pirate.po
@@ -1,8 +1,7 @@
-# Pirate (English) Translation
-# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+# SPDX-FileCopyrightText: 2014 MicroPython & CircuitPython contributors (https://github.com/adafruit/circuitpython/graphs/contributors)
 #
+# SPDX-License-Identifier: MIT
+
 msgid ""
 msgstr ""
 "Project-Id-Version: \n"
diff --git a/locale/es.po b/locale/es.po
index 903402406..0dd09a98d 100644
--- a/locale/es.po
+++ b/locale/es.po
@@ -1,14 +1,15 @@
-# Spanish translation.
-# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
-# This file is distributed under the same license as the PACKAGE package.
-# Carlos Diaz <carlos.santiago.diaz@gmail.com>, 2018.
-# Juan Biondi <juanernestobiondi@gmail.com>, 2018.
+# SPDX-FileCopyrightText: 2018 Carlos Diaz <carlos.santiago.diaz@gmail.com>
+# SPDX-FileCopyrightText: 2018 Juan Biondi <juanernestobiondi@gmail.com>
+# SPDX-FileCopyrightText: 2014 MicroPython & CircuitPython contributors (https://github.com/adafruit/circuitpython/graphs/contributors)
+#
+# SPDX-License-Identifier: MIT
+#, fuzzy
 msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-07-01 10:33-0500\n"
-"PO-Revision-Date: 2020-06-29 13:13+0000\n"
+"POT-Creation-Date: 2020-07-07 14:38-0500\n"
+"PO-Revision-Date: 2020-07-13 19:24+0000\n"
 "Last-Translator: Alvaro Figueroa <alvaro@greencore.co.cr>\n"
 "Language-Team: \n"
 "Language: es\n"
@@ -69,7 +70,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/sdioio/SDCard.c
 msgid "%q failure: %d"
-msgstr ""
+msgstr "%q fallo: %d"
 
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
@@ -100,7 +101,7 @@ msgstr "%q debe ser una tupla de longitud 2"
 
 #: ports/atmel-samd/common-hal/sdioio/SDCard.c
 msgid "%q pin invalid"
-msgstr ""
+msgstr "pin inválido %q"
 
 #: shared-bindings/fontio/BuiltinFont.c
 msgid "%q should be an int"
@@ -220,7 +221,7 @@ msgstr "'align' requiere 1 argumento"
 
 #: py/compile.c
 msgid "'async for' or 'async with' outside async function"
-msgstr ""
+msgstr "'async for' o 'async with' fuera de la función async"
 
 #: py/compile.c
 msgid "'await' outside function"
@@ -364,6 +365,8 @@ msgstr "Como máximo %d %q se puede especificar (no %d)"
 #: supervisor/shared/safe_mode.c
 msgid "Attempted heap allocation when MicroPython VM not running."
 msgstr ""
+"Se intentó asignación del montículo, sin que la VM de MicroPython esté "
+"ejecutando."
 
 #: main.c
 msgid "Auto-reload is off.\n"
@@ -416,7 +419,7 @@ msgstr "El brillo no se puede ajustar"
 #: shared-bindings/_bleio/UUID.c
 #, c-format
 msgid "Buffer + offset too small %d %d %d"
-msgstr ""
+msgstr "Búfer + compensado muy pequeños %d %d %d"
 
 #: shared-module/usb_hid/Device.c
 #, c-format
@@ -438,9 +441,10 @@ msgstr "El buffer es muy pequeño"
 msgid "Buffer length %d too big. It must be less than %d"
 msgstr "La longitud del buffer %d es muy grande. Debe ser menor a %d"
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
-msgstr ""
+msgstr "El tamaño del búfer debe ser múltiplo de 512"
 
 #: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
 msgid "Buffer must be at least length 1"
@@ -463,7 +467,7 @@ msgstr "Bus pin %d ya está siendo utilizado"
 
 #: shared-bindings/_bleio/UUID.c
 msgid "Byte buffer must be 16 bytes."
-msgstr "Byte buffer debe de ser 16 bytes"
+msgstr "Búfer Byte debe de ser 16 bytes."
 
 #: shared-bindings/nvm/ByteArray.c
 msgid "Bytes must be between 0 and 255."
@@ -479,7 +483,7 @@ msgstr "Llame a super().__ init __() antes de acceder al objeto nativo."
 
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "Can't set CCCD on local Characteristic"
-msgstr ""
+msgstr "No se puede configurar CCCD en la característica local"
 
 #: shared-bindings/displayio/Bitmap.c shared-bindings/pulseio/PulseIn.c
 msgid "Cannot delete values"
@@ -493,11 +497,13 @@ msgstr "No puede ser pull mientras este en modo de salida"
 
 #: ports/nrf/common-hal/microcontroller/Processor.c
 msgid "Cannot get temperature"
-msgstr "No se puede obtener la temperatura."
+msgstr "No se puede obtener la temperatura"
 
 #: shared-bindings/_bleio/Adapter.c
 msgid "Cannot have scan responses for extended, connectable advertisements."
 msgstr ""
+"No se pueden obtener respuestas de exploración para anuncios extendidos y "
+"conectables."
 
 #: ports/atmel-samd/common-hal/audioio/AudioOut.c
 msgid "Cannot output both channels on the same pin"
@@ -531,7 +537,7 @@ msgstr "No se puede especificar RTS o CTS en modo RS485"
 
 #: py/objslice.c
 msgid "Cannot subclass slice"
-msgstr "Cannot subclass slice"
+msgstr "No se puede manejar la partición en una subclase"
 
 #: shared-module/bitbangio/SPI.c
 msgid "Cannot transfer without MOSI and MISO pins."
@@ -567,11 +573,11 @@ msgstr ""
 
 #: shared-module/bitbangio/SPI.c
 msgid "Clock pin init failed."
-msgstr "Clock pin init fallido"
+msgstr "Iniciado de pin de reloj fallido."
 
 #: shared-module/bitbangio/I2C.c
 msgid "Clock stretch too long"
-msgstr "Clock stretch demasiado largo "
+msgstr "Estirado de reloj demasiado largo"
 
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 msgid "Clock unit in use"
@@ -584,7 +590,7 @@ msgstr "Entrada de columna debe ser digitalio.DigitalInOut"
 #: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
 #: shared-bindings/displayio/ParallelBus.c
 msgid "Command must be an int between 0 and 255"
-msgstr "Command debe estar entre 0 y 255."
+msgstr "Command debe ser un int entre 0 y 255"
 
 #: shared-bindings/_bleio/Connection.c
 msgid ""
@@ -606,6 +612,10 @@ msgstr "Código crudo corrupto"
 msgid "Could not initialize GNSS"
 msgstr "No se pudo inicializar el GNSS"
 
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr "No se pudo inicializar SDCard"
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "No se puede inicializar la UART"
@@ -658,7 +668,7 @@ msgstr "No se pudo asignar el segundo buffer"
 
 #: supervisor/shared/safe_mode.c
 msgid "Crash into the HardFault_Handler."
-msgstr ""
+msgstr "Choque contra el HardFault_Handler."
 
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "DAC Channel Init Error"
@@ -683,7 +693,7 @@ msgstr "Trozo de datos debe seguir fmt chunk"
 
 #: ports/nrf/common-hal/_bleio/Adapter.c
 msgid "Data too large for advertisement packet"
-msgstr "Data es muy grande para el paquete de advertisement."
+msgstr "Data es muy grande para el paquete de anuncio"
 
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Destination capacity is smaller than destination_length."
@@ -737,7 +747,7 @@ msgstr "Se espera un %q"
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 #: shared-bindings/_bleio/Descriptor.c shared-bindings/_bleio/PacketBuffer.c
 msgid "Expected a Characteristic"
-msgstr "Se esperaba una Característica."
+msgstr "Se esperaba una Característica"
 
 #: shared-bindings/_bleio/Characteristic.c
 msgid "Expected a Service"
@@ -763,16 +773,16 @@ msgstr "No se admiten anuncios extendidos con respuesta de escaneo."
 
 #: extmod/ulab/code/fft.c
 msgid "FFT is defined for ndarrays only"
-msgstr ""
+msgstr "FFT se define solo para ndarrays"
 
 #: shared-bindings/ps2io/Ps2.c
 msgid "Failed sending command."
-msgstr "Fallo enviando comando"
+msgstr "Fallo enviando comando."
 
 #: ports/nrf/sd_mutex.c
-#, fuzzy, c-format
+#, c-format
 msgid "Failed to acquire mutex, err 0x%04x"
-msgstr "No se puede adquirir el mutex, status: 0x%08lX"
+msgstr "No se puede adquirir el mutex, error 0x%04x"
 
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 msgid "Failed to allocate RX buffer"
@@ -864,7 +874,7 @@ msgid ""
 "mpy-update for more info."
 msgstr ""
 "Archivo .mpy incompatible. Actualice todos los archivos .mpy. Consulte "
-"http://adafru.it/mpy-update para más información"
+"http://adafru.it/mpy-update para más información."
 
 #: shared-bindings/_pew/PewPew.c
 msgid "Incorrect buffer size"
@@ -884,7 +894,7 @@ msgstr "Cifrado insuficiente"
 
 #: ports/stm/common-hal/busio/UART.c
 msgid "Internal define error"
-msgstr ""
+msgstr "Error interno de definición"
 
 #: shared-module/rgbmatrix/RGBMatrix.c
 #, c-format
@@ -893,7 +903,7 @@ msgstr "Error interno #%d"
 
 #: shared-bindings/sdioio/SDCard.c
 msgid "Invalid %q"
-msgstr ""
+msgstr "%q inválido"
 
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
@@ -972,7 +982,7 @@ msgstr "Frecuencia suministrada no válida"
 
 #: supervisor/shared/safe_mode.c
 msgid "Invalid memory access."
-msgstr "Acceso a memoria no válido"
+msgstr "Acceso a memoria no válido."
 
 #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
 msgid "Invalid number of bits"
@@ -1002,7 +1012,8 @@ msgstr "Pin inválido para canal derecho"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
@@ -1027,7 +1038,7 @@ msgstr "Modo de ejecución inválido."
 
 #: shared-module/_bleio/Attribute.c
 msgid "Invalid security_mode"
-msgstr ""
+msgstr "Modo de seguridad no válido"
 
 #: shared-bindings/audiomixer/Mixer.c
 msgid "Invalid voice"
@@ -1055,7 +1066,7 @@ msgstr "LHS del agumento por palabra clave deberia ser un identificador"
 
 #: shared-module/displayio/Group.c
 msgid "Layer already in a group."
-msgstr "Layer ya pertenece a un grupo"
+msgstr "La capa ya pertenece a un grupo."
 
 #: shared-module/displayio/Group.c
 msgid "Layer must be a Group or TileGrid subclass."
@@ -1084,7 +1095,7 @@ msgstr "Valor máximo de x cuando se refleja es %d"
 
 #: supervisor/shared/safe_mode.c
 msgid "MicroPython NLR jump failed. Likely memory corruption."
-msgstr ""
+msgstr "MicroPython NLR jump falló. Probable corrupción de la memoria."
 
 #: supervisor/shared/safe_mode.c
 msgid "MicroPython fatal error."
@@ -1100,16 +1111,20 @@ msgstr "Falta el pin MISO o MOSI"
 
 #: shared-bindings/displayio/Group.c
 msgid "Must be a %q subclass."
-msgstr "Debe de ser una subclase de %q"
+msgstr "Debe de ser una subclase de %q."
 
 #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
 msgid "Must provide MISO or MOSI pin"
 msgstr "Debe proporcionar un pin MISO o MOSI"
 
+#: ports/stm/common-hal/busio/SPI.c
+msgid "Must provide SCK pin"
+msgstr "Debes proveer un pin para SCK"
+
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid "Must use a multiple of 6 rgb pins, not %d"
-msgstr ""
+msgstr "Debe usar un múltiplo de 6 pines rgb, no %d"
 
 #: py/parse.c
 msgid "Name too long"
@@ -1117,7 +1132,7 @@ msgstr "Nombre muy largo"
 
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 msgid "No CCCD for this Characteristic"
-msgstr ""
+msgstr "No hay CCCD para esta característica"
 
 #: ports/atmel-samd/common-hal/analogio/AnalogOut.c
 #: ports/stm/common-hal/analogio/AnalogOut.c
@@ -1208,7 +1223,7 @@ msgstr "No hay temporizador disponible"
 
 #: supervisor/shared/safe_mode.c
 msgid "Nordic Soft Device failure assertion."
-msgstr ""
+msgstr "fallo de aserción de dispositivo Nordic Soft."
 
 #: ports/nrf/common-hal/_bleio/__init__.c
 #: shared-bindings/_bleio/CharacteristicBuffer.c
@@ -1225,7 +1240,7 @@ msgid ""
 "Object has been deinitialized and can no longer be used. Create a new object."
 msgstr ""
 "El objeto se ha desinicializado y ya no se puede utilizar. Crea un nuevo "
-"objeto"
+"objeto."
 
 #: ports/nrf/common-hal/busio/UART.c
 msgid "Odd parity is not supported"
@@ -1249,10 +1264,12 @@ msgid ""
 "Only monochrome, indexed 4bpp or 8bpp, and 16bpp or greater BMPs supported: "
 "%d bpp given"
 msgstr ""
+"Solo se admiten BMP monocromáticos, indexados de 4 bpp u 8 bpp y 16 bpp o "
+"más: %d bpp proporcionados"
 
 #: shared-bindings/audiobusio/PDMIn.c
 msgid "Oversample must be multiple of 8."
-msgstr "El sobremuestreo debe ser un múltiplo de 8"
+msgstr "El sobremuestreo debe ser un múltiplo de 8."
 
 #: shared-bindings/pulseio/PWMOut.c
 msgid ""
@@ -1263,8 +1280,8 @@ msgstr "PWM duty_cycle debe ser entre 0 y 65535 inclusivo (16 bit resolution)"
 msgid ""
 "PWM frequency not writable when variable_frequency is False on construction."
 msgstr ""
-"PWM frecuencia no esta escrito cuando el variable_frequency es falso en "
-"construcion"
+"La frecuencia de PWM no se puede escribir variable_frequency es False en la "
+"construcción."
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
@@ -1319,7 +1336,7 @@ msgstr "Pop de un buffer Ps2 vacio"
 
 #: shared-bindings/_bleio/Adapter.c
 msgid "Prefix buffer must be on the heap"
-msgstr ""
+msgstr "El búfer de prefijo debe estar en el montículo"
 
 #: main.c
 msgid "Press any key to enter the REPL. Use CTRL-D to reload."
@@ -1406,7 +1423,7 @@ msgstr "Ejecutando en modo seguro! No se esta ejecutando el código guardado.\n"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "SD card CSD format not supported"
-msgstr ""
+msgstr "Sin capacidad para formato CSD para tarjeta SD"
 
 #: ports/atmel-samd/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
@@ -1449,7 +1466,7 @@ msgstr "Serializer está siendo utilizado"
 
 #: shared-bindings/nvm/ByteArray.c
 msgid "Slice and value different lengths."
-msgstr "Slice y value tienen diferentes longitudes"
+msgstr "Slice y value tienen tamaños diferentes."
 
 #: shared-bindings/displayio/Bitmap.c shared-bindings/displayio/Group.c
 #: shared-bindings/displayio/TileGrid.c shared-bindings/pulseio/PulseIn.c
@@ -1478,7 +1495,7 @@ msgstr "Suministre al menos un pin UART"
 
 #: shared-bindings/gnss/GNSS.c
 msgid "System entry must be gnss.SatelliteSystem"
-msgstr ""
+msgstr "La entrada del sistema debe ser gnss.SatelliteSystem"
 
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Temperature read timed out"
@@ -1489,6 +1506,8 @@ msgid ""
 "The CircuitPython heap was corrupted because the stack was too small.\n"
 "Please increase the stack size if you know how, or if not:"
 msgstr ""
+"El montículo de CircuitPython se dañó porque la pila era demasiado pequeña.\n"
+"Aumente el tamaño de la pila si sabe cómo, o si no:"
 
 #: supervisor/shared/safe_mode.c
 msgid ""
@@ -1639,7 +1658,7 @@ msgstr "No se pudo leer los datos de la paleta de colores"
 
 #: shared-bindings/nvm/ByteArray.c
 msgid "Unable to write to nvm."
-msgstr "Imposible escribir en nvm"
+msgstr "Imposible escribir en nvm."
 
 #: ports/nrf/common-hal/_bleio/UUID.c
 msgid "Unexpected nrfx uuid type"
@@ -1648,7 +1667,7 @@ msgstr "Tipo de uuid nrfx inesperado"
 #: ports/nrf/common-hal/_bleio/__init__.c
 #, c-format
 msgid "Unknown gatt error: 0x%04x"
-msgstr ""
+msgstr "Error de gatt desconocido: 0x%04x"
 
 #: supervisor/shared/safe_mode.c
 msgid "Unknown reason."
@@ -1667,7 +1686,7 @@ msgstr "Error suave desconocido en dispositivo: %04x"
 #: shared-bindings/_pixelbuf/PixelBuf.c
 #, c-format
 msgid "Unmatched number of items on RHS (expected %d, got %d)."
-msgstr "Número incomparable de elementos en RHS (%d esperado,%d obtenido)"
+msgstr "Número incomparable de elementos en RHS (%d esperado,%d obtenido)."
 
 #: ports/nrf/common-hal/_bleio/__init__.c
 msgid ""
@@ -1710,7 +1729,7 @@ msgstr "Tamaño de valor > max_length"
 
 #: py/emitnative.c
 msgid "Viper functions don't currently support more than 4 arguments"
-msgstr "funciones Viper actualmente no soportan más de 4 argumentos."
+msgstr "funciones Viper no soportan por el momento, más de 4 argumentos"
 
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Voltage read timed out"
@@ -1723,22 +1742,25 @@ msgstr "ADVERTENCIA: El nombre de archivo de tu código tiene dos extensiones\n"
 #: shared-bindings/watchdog/WatchDogTimer.c
 msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
 msgstr ""
+"WatchDogTimer no se puede desinicializar luego de definirse en modo RESET"
 
 #: shared-bindings/watchdog/WatchDogTimer.c
 msgid "WatchDogTimer is not currently running"
-msgstr ""
+msgstr "WatchDogTimer no se está ejecutando en este momento"
 
 #: shared-bindings/watchdog/WatchDogTimer.c
 msgid "WatchDogTimer.mode cannot be changed once set to WatchDogMode.RESET"
 msgstr ""
+"WatchDogTimer.mode no se puede modificar luego de configurar WatchDogMode."
+"RESET"
 
 #: shared-bindings/watchdog/WatchDogTimer.c
 msgid "WatchDogTimer.timeout must be greater than 0"
-msgstr ""
+msgstr "WatchDogTimer.timeout debe ser mayor a 0"
 
 #: supervisor/shared/safe_mode.c
 msgid "Watchdog timer expired."
-msgstr ""
+msgstr "Temporizador de perro guardián expirado."
 
 #: py/builtinhelp.c
 #, c-format
@@ -1758,7 +1780,7 @@ msgstr ""
 
 #: ports/nrf/common-hal/_bleio/PacketBuffer.c
 msgid "Writes not supported on Characteristic"
-msgstr ""
+msgstr "Escrituras no admitidas en la característica"
 
 #: supervisor/shared/safe_mode.c
 msgid "You are in safe mode: something unanticipated happened.\n"
@@ -2050,7 +2072,7 @@ msgstr ""
 
 #: shared-module/sdcardio/SDCard.c
 msgid "can't set 512 block size"
-msgstr ""
+msgstr "no se puede definir un tamaño de bloque de 512"
 
 #: py/objnamedtuple.c
 msgid "can't set attribute"
@@ -2104,7 +2126,7 @@ msgstr "no se puede reformar el arreglo (forma de entrada/salida incompatible)"
 
 #: py/emitnative.c
 msgid "casting"
-msgstr ""
+msgstr "convirtiendo tipo"
 
 #: shared-bindings/_stage/Text.c
 msgid "chars buffer too small"
@@ -2164,27 +2186,27 @@ msgstr "conversión a objeto"
 
 #: extmod/ulab/code/filter.c
 msgid "convolve arguments must be linear arrays"
-msgstr ""
+msgstr "los argumentos para convolve deben ser arreglos lineares"
 
 #: extmod/ulab/code/filter.c
 msgid "convolve arguments must be ndarrays"
-msgstr ""
+msgstr "los argumentos para convolve deben ser ndarrays"
 
 #: extmod/ulab/code/filter.c
 msgid "convolve arguments must not be empty"
-msgstr ""
+msgstr "los argumentos para convolve no deben estar vacíos"
 
 #: extmod/ulab/code/ndarray.c
 msgid "could not broadast input array from shape"
-msgstr ""
+msgstr "no se pudo anunciar la matriz de entrada desde la forma"
 
 #: extmod/ulab/code/poly.c
 msgid "could not invert Vandermonde matrix"
-msgstr ""
+msgstr "no se pudo invertir la matriz de Vandermonde"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "couldn't determine SD card version"
-msgstr ""
+msgstr "no se pudo determinar la versión de la tarjeta SD"
 
 #: extmod/ulab/code/approx.c
 msgid "data must be iterable"
@@ -2196,7 +2218,7 @@ msgstr "los datos deben ser de igual tamaño"
 
 #: extmod/ulab/code/numerical.c
 msgid "ddof must be smaller than length of data set"
-msgstr ""
+msgstr "ddof debe ser menor que la longitud del conjunto de datos"
 
 #: py/parsenum.c
 msgid "decimal numbers not supported"
@@ -2227,7 +2249,7 @@ msgstr "la secuencia de actualizacion del dict tiene una longitud incorrecta"
 
 #: extmod/ulab/code/numerical.c
 msgid "diff argument must be an ndarray"
-msgstr ""
+msgstr "El argumento diff debe ser un ndarray"
 
 #: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
 #: shared-bindings/math/__init__.c
@@ -2261,7 +2283,7 @@ msgstr "end_x debe ser un int"
 #: ports/nrf/common-hal/busio/UART.c
 #, c-format
 msgid "error = 0x%08lX"
-msgstr "error = 0x%08lx"
+msgstr "error = 0x%08lX"
 
 #: py/runtime.c
 msgid "exceptions must derive from BaseException"
@@ -2301,23 +2323,23 @@ msgstr "argumento posicional adicional dado"
 
 #: py/parse.c
 msgid "f-string expression part cannot include a '#'"
-msgstr ""
+msgstr "La parte de expresión f-string no puede incluir un '#'"
 
 #: py/parse.c
 msgid "f-string expression part cannot include a backslash"
-msgstr ""
+msgstr "La parte de expresión f-string no puede incluir una barra invertida"
 
 #: py/parse.c
 msgid "f-string: empty expression not allowed"
-msgstr ""
+msgstr "cadena-f: expresión vacía no permitida"
 
 #: py/parse.c
 msgid "f-string: expecting '}'"
-msgstr ""
+msgstr "f-string: esperando '}'"
 
 #: py/parse.c
 msgid "f-string: single '}' is not allowed"
-msgstr ""
+msgstr "cadena-f: solo '}' no está permitido"
 
 #: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3Decoder.c
 #: shared-bindings/displayio/OnDiskBitmap.c
@@ -2350,11 +2372,11 @@ msgstr "primer argumento para super() debe ser de tipo"
 
 #: extmod/ulab/code/ndarray.c
 msgid "flattening order must be either 'C', or 'F'"
-msgstr ""
+msgstr "el orden de aplanamiento debe ser 'C' o 'F'"
 
 #: extmod/ulab/code/numerical.c
 msgid "flip argument must be an ndarray"
-msgstr ""
+msgstr "el argumento invertido debe ser un ndarray"
 
 #: py/objint.c
 msgid "float too big"
@@ -2387,7 +2409,7 @@ msgstr "la función tiene múltiples valores para el argumento '%q'"
 
 #: extmod/ulab/code/approx.c
 msgid "function has the same sign at the ends of interval"
-msgstr ""
+msgstr "la función tiene el mismo signo a extremos del intervalo"
 
 #: extmod/ulab/code/compare.c
 msgid "function is implemented for scalars and ndarrays only"
@@ -2418,7 +2440,7 @@ msgstr "la función toma %d argumentos posicionales pero le fueron dados %d"
 
 #: shared-bindings/time/__init__.c
 msgid "function takes exactly 9 arguments"
-msgstr "la función toma exactamente 9 argumentos."
+msgstr "la función toma exactamente 9 argumentos"
 
 #: py/objgenerator.c
 msgid "generator already executing"
@@ -2525,7 +2547,7 @@ msgstr "Entero requerido"
 
 #: extmod/ulab/code/approx.c
 msgid "interp is defined for 1D arrays of equal length"
-msgstr ""
+msgstr "interp está definido para arreglos de 1D del mismo tamaño"
 
 #: shared-bindings/_bleio/Adapter.c
 #, c-format
@@ -2650,7 +2672,7 @@ msgstr "long int no soportado en esta compilación"
 
 #: py/parse.c
 msgid "malformed f-string"
-msgstr ""
+msgstr "cadena-f mal formada"
 
 #: shared-bindings/_stage/Layer.c
 msgid "map buffer too small"
@@ -2662,17 +2684,17 @@ msgstr "error de dominio matemático"
 
 #: extmod/ulab/code/linalg.c
 msgid "matrix dimensions do not match"
-msgstr ""
+msgstr "las dimensiones de la matriz no coinciden"
 
 #: extmod/ulab/code/linalg.c
 msgid "matrix is not positive definite"
-msgstr ""
+msgstr "matrix no es definida positiva"
 
 #: ports/nrf/common-hal/_bleio/Characteristic.c
 #: ports/nrf/common-hal/_bleio/Descriptor.c
 #, c-format
 msgid "max_length must be 0-%d when fixed_length is %s"
-msgstr ""
+msgstr "max_length debe ser 0-%d cuando fixed_length es %s"
 
 #: py/runtime.c
 msgid "maximum recursion depth exceeded"
@@ -2693,7 +2715,7 @@ msgstr "módulo no encontrado"
 
 #: extmod/ulab/code/poly.c
 msgid "more degrees of freedom than data points"
-msgstr ""
+msgstr "más grados de libertad que los puntos de datos"
 
 #: py/compile.c
 msgid "multiple *x in assignment"
@@ -2717,7 +2739,7 @@ msgstr "debe utilizar argumento de palabra clave para la función clave"
 
 #: extmod/ulab/code/numerical.c
 msgid "n must be between 0, and 9"
-msgstr ""
+msgstr "n debe estar entre 0 y 9"
 
 #: py/runtime.c
 msgid "name '%q' is not defined"
@@ -2750,7 +2772,7 @@ msgstr "cuenta de corrimientos negativo"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "no SD card"
-msgstr ""
+msgstr "no hay tarjeta SD"
 
 #: py/vm.c
 msgid "no active exception to reraise"
@@ -2771,11 +2793,11 @@ msgstr "ningún módulo se llama '%q'"
 #: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
 #: shared-bindings/displayio/ParallelBus.c
 msgid "no reset pin available"
-msgstr ""
+msgstr "no hay pin de reinicio disponible"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "no response from SD card"
-msgstr ""
+msgstr "no hay respuesta de la tarjeta SD"
 
 #: py/runtime.c
 msgid "no such attribute"
@@ -2783,7 +2805,7 @@ msgstr "no hay tal atributo"
 
 #: ports/nrf/common-hal/_bleio/Connection.c
 msgid "non-UUID found in service_uuids_whitelist"
-msgstr ""
+msgstr "no UUID encontrado en service_uuids_whitelist"
 
 #: py/compile.c
 msgid "non-default argument follows default argument"
@@ -2818,11 +2840,11 @@ msgstr "no suficientes argumentos para format string"
 
 #: extmod/ulab/code/poly.c
 msgid "number of arguments must be 2, or 3"
-msgstr ""
+msgstr "el número de argumentos debe ser 2 o 3"
 
 #: extmod/ulab/code/create.c
 msgid "number of points must be at least 2"
-msgstr ""
+msgstr "el número de puntos debe ser al menos 2"
 
 #: py/obj.c
 #, c-format
@@ -2875,17 +2897,16 @@ msgid "odd-length string"
 msgstr "string de longitud impar"
 
 #: py/objstr.c py/objstrunicode.c
-#, fuzzy
 msgid "offset out of bounds"
-msgstr "address fuera de límites"
+msgstr "offset fuera de límites"
 
 #: ports/nrf/common-hal/audiobusio/PDMIn.c
 msgid "only bit_depth=16 is supported"
-msgstr ""
+msgstr "solo se admite bit_depth=16"
 
 #: ports/nrf/common-hal/audiobusio/PDMIn.c
 msgid "only sample_rate=16000 is supported"
-msgstr ""
+msgstr "solo se admite sample_rate=16000"
 
 #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
 #: shared-bindings/nvm/ByteArray.c
@@ -2895,15 +2916,15 @@ msgstr "solo se admiten segmentos con step=1 (alias None)"
 #: extmod/ulab/code/compare.c extmod/ulab/code/ndarray.c
 #: extmod/ulab/code/vectorise.c
 msgid "operands could not be broadcast together"
-msgstr ""
+msgstr "los operandos no se pueden transmitir juntos"
 
 #: extmod/ulab/code/numerical.c
 msgid "operation is not implemented on ndarrays"
-msgstr ""
+msgstr "la operación no está implementada para ndarrays"
 
 #: extmod/ulab/code/ndarray.c
 msgid "operation is not supported for given type"
-msgstr ""
+msgstr "la operación no es compatible para un tipo dado"
 
 #: py/modbuiltins.c
 msgid "ord expects a character"
@@ -2952,7 +2973,7 @@ msgstr "pixel_shader debe ser displayio.Palette o displayio.ColorConverter"
 
 #: shared-module/vectorio/Polygon.c
 msgid "polygon can only be registered in one parent"
-msgstr ""
+msgstr "el polígono solo se puede registrar en uno de los padres"
 
 #: ports/atmel-samd/common-hal/pulseio/PulseIn.c
 #: ports/cxd56/common-hal/pulseio/PulseIn.c
@@ -2987,11 +3008,11 @@ msgstr "desbordamiento de cola(queue)"
 
 #: py/parse.c
 msgid "raw f-strings are not implemented"
-msgstr ""
+msgstr "no está implementado cadenas-f sin procesar"
 
 #: extmod/ulab/code/fft.c
 msgid "real and imaginary parts must be of equal length"
-msgstr ""
+msgstr "las partes reales e imaginarias deben ser de igual longitud"
 
 #: py/builtinimport.c
 msgid "relative import"
@@ -3013,16 +3034,16 @@ msgstr "retorno esperado '%q' pero se obtuvo '%q'"
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid "rgb_pins[%d] duplicates another pin assignment"
-msgstr ""
+msgstr "rgb_pins[%d] duplica otra asignación de pin"
 
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid "rgb_pins[%d] is not on the same port as clock"
-msgstr ""
+msgstr "rgb_pins[%d] no está en el mismo puerto que el reloj"
 
 #: extmod/ulab/code/ndarray.c
 msgid "right hand side must be an ndarray, or a scalar"
-msgstr ""
+msgstr "el lado derecho debe ser un ndarray o escalar"
 
 #: py/objstr.c
 msgid "rsplit(None,n)"
@@ -3042,7 +3063,7 @@ msgstr "frecuencia de muestreo fuera de rango"
 
 #: py/modmicropython.c
 msgid "schedule stack full"
-msgstr ""
+msgstr "pila de horario llena"
 
 #: lib/utils/pyexec.c py/builtinimport.c
 msgid "script compilation not supported"
@@ -3050,7 +3071,7 @@ msgstr "script de compilación no soportado"
 
 #: extmod/ulab/code/ndarray.c
 msgid "shape must be a 2-tuple"
-msgstr ""
+msgstr "la forma debe ser una tupla de 2"
 
 #: py/objstr.c
 msgid "sign not allowed in string format specifier"
@@ -3066,7 +3087,7 @@ msgstr "un solo '}' encontrado en format string"
 
 #: extmod/ulab/code/linalg.c
 msgid "size is defined for ndarrays only"
-msgstr ""
+msgstr "el tamaño se define solo para ndarrays"
 
 #: shared-bindings/time/__init__.c
 msgid "sleep length must be non-negative"
@@ -3074,7 +3095,7 @@ msgstr "la longitud de sleep no puede ser negativa"
 
 #: extmod/ulab/code/ndarray.c
 msgid "slice step can't be zero"
-msgstr ""
+msgstr "el tamaño de la división no puede ser cero"
 
 #: py/objslice.c py/sequence.c
 msgid "slice step cannot be zero"
@@ -3090,28 +3111,27 @@ msgstr "reinicio suave\n"
 
 #: extmod/ulab/code/numerical.c
 msgid "sort argument must be an ndarray"
-msgstr ""
+msgstr "argumento de ordenado debe ser un ndarray"
 
 #: extmod/ulab/code/filter.c
 msgid "sos array must be of shape (n_section, 6)"
-msgstr ""
+msgstr "el arreglo sos debe de forma (n_section, 6)"
 
 #: extmod/ulab/code/filter.c
 msgid "sos[:, 3] should be all ones"
-msgstr ""
+msgstr "sos[:, 3] deberían ser todos unos"
 
 #: extmod/ulab/code/filter.c
 msgid "sosfilt requires iterable arguments"
-msgstr ""
+msgstr "sosfilt requiere argumentos iterables"
 
 #: py/objstr.c
 msgid "start/end indices"
 msgstr "índices inicio/final"
 
 #: shared-bindings/displayio/Shape.c
-#, fuzzy
 msgid "start_x should be an int"
-msgstr "y deberia ser un int"
+msgstr "start_x deberia ser un int"
 
 #: shared-bindings/random/__init__.c
 msgid "step must be non-zero"
@@ -3181,10 +3201,11 @@ msgstr "time.struct_time() toma un sequencio 9"
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
 msgid "timeout duration exceeded the maximum supported value"
 msgstr ""
+"la duración de tiempo de espera ha excedido la capacidad máxima del valor"
 
 #: shared-bindings/busio/UART.c
 msgid "timeout must be 0.0-100.0 seconds"
-msgstr ""
+msgstr "el tiempo de espera debe ser 0.0-100.0 segundos"
 
 #: shared-bindings/_bleio/CharacteristicBuffer.c
 msgid "timeout must be >= 0.0"
@@ -3192,11 +3213,11 @@ msgstr "tiempo muerto debe ser >= 0.0"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "timeout waiting for v1 card"
-msgstr ""
+msgstr "tiempo de espera agotado esperando por tarjeta v1"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "timeout waiting for v2 card"
-msgstr ""
+msgstr "tiempo de espera agotado esperando a tarjeta v2"
 
 #: shared-bindings/time/__init__.c
 msgid "timestamp out of range for platform time_t"
@@ -3208,7 +3229,7 @@ msgstr "demasiados argumentos provistos con el formato dado"
 
 #: extmod/ulab/code/ndarray.c
 msgid "too many indices"
-msgstr ""
+msgstr "demasiados índices"
 
 #: py/runtime.c
 #, c-format
@@ -3337,31 +3358,31 @@ msgstr "tipos no soportados para %q: '%s', '%s'"
 #: py/objint.c
 #, c-format
 msgid "value must fit in %d byte(s)"
-msgstr ""
+msgstr "el valor debe caber en %d byte(s)"
 
 #: shared-bindings/displayio/Bitmap.c
 msgid "value_count must be > 0"
-msgstr ""
+msgstr "value_count debe ser > 0"
 
 #: shared-bindings/watchdog/WatchDogTimer.c
 msgid "watchdog timeout must be greater than 0"
-msgstr ""
+msgstr "el tiempo de espera del perro guardián debe ser mayor a 0"
 
 #: shared-bindings/_bleio/Adapter.c
 msgid "window must be <= interval"
-msgstr ""
+msgstr "la ventana debe ser <= intervalo"
 
 #: extmod/ulab/code/linalg.c
 msgid "wrong argument type"
-msgstr ""
+msgstr "tipo de argumento incorrecto"
 
 #: extmod/ulab/code/ndarray.c
 msgid "wrong index type"
-msgstr ""
+msgstr "tipo de índice incorrecto"
 
 #: extmod/ulab/code/vectorise.c
 msgid "wrong input type"
-msgstr ""
+msgstr "tipo de entrada incorrecta"
 
 #: py/objstr.c
 msgid "wrong number of arguments"
@@ -3373,25 +3394,23 @@ msgstr "numero erroneo de valores a descomprimir"
 
 #: extmod/ulab/code/ndarray.c
 msgid "wrong operand type"
-msgstr ""
+msgstr "tipo de operando incorrecto"
 
 #: extmod/ulab/code/vectorise.c
 msgid "wrong output type"
-msgstr ""
+msgstr "tipo de salida incorrecta"
 
 #: shared-module/displayio/Shape.c
-#, fuzzy
 msgid "x value out of bounds"
-msgstr "address fuera de límites"
+msgstr "valor x fuera de límites"
 
 #: shared-bindings/displayio/Shape.c
 msgid "y should be an int"
 msgstr "y deberia ser un int"
 
 #: shared-module/displayio/Shape.c
-#, fuzzy
 msgid "y value out of bounds"
-msgstr "address fuera de límites"
+msgstr "valor y fuera de límites"
 
 #: py/objrange.c
 msgid "zero step"
@@ -3399,15 +3418,15 @@ msgstr "paso cero"
 
 #: extmod/ulab/code/filter.c
 msgid "zi must be an ndarray"
-msgstr ""
+msgstr "zi debe ser un ndarray"
 
 #: extmod/ulab/code/filter.c
 msgid "zi must be of float type"
-msgstr ""
+msgstr "zi debe ser de tipo flotante"
 
 #: extmod/ulab/code/filter.c
 msgid "zi must be of shape (n_section, 2)"
-msgstr ""
+msgstr "zi debe ser una forma (n_section,2)"
 
 #~ msgid "AP required"
 #~ msgstr "AP requerido"
diff --git a/locale/fil.po b/locale/fil.po
index ff5cc6426..1297ce186 100644
--- a/locale/fil.po
+++ b/locale/fil.po
@@ -1,13 +1,11 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+# SPDX-FileCopyrightText: 2014 MicroPython & CircuitPython contributors (https://github.com/adafruit/circuitpython/graphs/contributors)
 #
+# SPDX-License-Identifier: MIT
 msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-07-01 10:33-0500\n"
+"POT-Creation-Date: 2020-07-07 14:38-0500\n"
 "PO-Revision-Date: 2018-12-20 22:15-0800\n"
 "Last-Translator: Timothy <me@timothygarcia.ca>\n"
 "Language-Team: fil\n"
@@ -431,7 +429,8 @@ msgstr ""
 msgid "Buffer length %d too big. It must be less than %d"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
 msgstr ""
 
@@ -598,6 +597,10 @@ msgstr ""
 msgid "Could not initialize GNSS"
 msgstr ""
 
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Hindi ma-initialize ang UART"
@@ -998,7 +1001,8 @@ msgstr "Mali ang pin para sa kanang channel"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
@@ -1102,6 +1106,10 @@ msgstr ""
 msgid "Must provide MISO or MOSI pin"
 msgstr ""
 
+#: ports/stm/common-hal/busio/SPI.c
+msgid "Must provide SCK pin"
+msgstr ""
+
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid "Must use a multiple of 6 rgb pins, not %d"
diff --git a/locale/fr.po b/locale/fr.po
index 7facdef04..4582974d4 100644
--- a/locale/fr.po
+++ b/locale/fr.po
@@ -1,14 +1,13 @@
-# French translation.
-# Copyright (C) 2018
-# This file is distributed under the same license as the PACKAGE package.
-# Pierrick Couturier <arofarn@arofarn.info>, 2018.
-# Olivier Deveault <odeevee@outlook.com>
+# SPDX-FileCopyrightText: 2018 Pierrick Couturier <arofarn@arofarn.info>
+# SPDX-FileCopyrightText: 2018 Olivier Deveault <odeevee@outlook.com>
+# SPDX-FileCopyrightText: 2014 MicroPython & CircuitPython contributors (https://github.com/adafruit/circuitpython/graphs/contributors)
 #
+# SPDX-License-Identifier: MIT
 msgid ""
 msgstr ""
 "Project-Id-Version: 0.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-07-01 10:33-0500\n"
+"POT-Creation-Date: 2020-07-07 14:38-0500\n"
 "PO-Revision-Date: 2020-06-05 17:29+0000\n"
 "Last-Translator: aberwag <aberwag@gmail.com>\n"
 "Language: fr\n"
@@ -441,7 +440,8 @@ msgstr "Le tampon est trop petit"
 msgid "Buffer length %d too big. It must be less than %d"
 msgstr "La longueur du tampon %d est trop grande. Il doit être inférieur à %d"
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
 msgstr ""
 
@@ -614,6 +614,10 @@ msgstr "Code brut corrompu"
 msgid "Could not initialize GNSS"
 msgstr ""
 
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "L'UART n'a pu être initialisé"
@@ -1011,7 +1015,8 @@ msgstr "Broche invalide pour le canal droit"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
@@ -1115,6 +1120,10 @@ msgstr "Doit être une sous-classe de %q."
 msgid "Must provide MISO or MOSI pin"
 msgstr "Doit fournir une broche MISO ou MOSI"
 
+#: ports/stm/common-hal/busio/SPI.c
+msgid "Must provide SCK pin"
+msgstr ""
+
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid "Must use a multiple of 6 rgb pins, not %d"
diff --git a/locale/it_IT.po b/locale/it_IT.po
index 983b47b82..235843382 100644
--- a/locale/it_IT.po
+++ b/locale/it_IT.po
@@ -1,14 +1,12 @@
-# Italian translation.
-# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
-# This file is distributed under the same license as the PACKAGE package.
-# Enrico Paganin <enrico.paganin@mail.com>, 2018
+# SPDX-FileCopyrightText: 2018 Enrico Paganin <enrico.paganin@mail.com>
+# SPDX-FileCopyrightText: 2014 MicroPython & CircuitPython contributors (https://github.com/adafruit/circuitpython/graphs/contributors)
 #
-#, fuzzy
+# SPDX-License-Identifier: MIT
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-07-01 10:33-0500\n"
+"POT-Creation-Date: 2020-07-07 14:38-0500\n"
 "PO-Revision-Date: 2018-10-02 16:27+0200\n"
 "Last-Translator: Enrico Paganin <enrico.paganin@mail.com>\n"
 "Language-Team: \n"
@@ -431,7 +429,8 @@ msgstr ""
 msgid "Buffer length %d too big. It must be less than %d"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
 msgstr ""
 
@@ -599,6 +598,10 @@ msgstr ""
 msgid "Could not initialize GNSS"
 msgstr ""
 
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Impossibile inizializzare l'UART"
@@ -1000,7 +1003,8 @@ msgstr "Pin non valido per il canale destro"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
@@ -1106,6 +1110,10 @@ msgstr ""
 msgid "Must provide MISO or MOSI pin"
 msgstr ""
 
+#: ports/stm/common-hal/busio/SPI.c
+msgid "Must provide SCK pin"
+msgstr ""
+
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid "Must use a multiple of 6 rgb pins, not %d"
diff --git a/locale/ko.po b/locale/ko.po
index ea3f56470..6829f6819 100644
--- a/locale/ko.po
+++ b/locale/ko.po
@@ -1,14 +1,12 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
-# This file is distributed under the same license as the PACKAGE package.
-# 글라파, 2019.
+# SPDX-FileCopyrightText: 2019 글라파
+# SPDX-FileCopyrightText: 2014 MicroPython & CircuitPython contributors (https://github.com/adafruit/circuitpython/graphs/contributors)
 #
-#, fuzzy
+# SPDX-License-Identifier: MIT
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-07-01 10:33-0500\n"
+"POT-Creation-Date: 2020-07-07 14:38-0500\n"
 "PO-Revision-Date: 2019-05-06 14:22-0700\n"
 "Last-Translator: \n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -429,7 +427,8 @@ msgstr ""
 msgid "Buffer length %d too big. It must be less than %d"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
 msgstr ""
 
@@ -593,6 +592,10 @@ msgstr ""
 msgid "Could not initialize GNSS"
 msgstr ""
 
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr ""
@@ -986,7 +989,8 @@ msgstr "오른쪽 채널 핀이 잘못되었습니다"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
@@ -1090,6 +1094,10 @@ msgstr ""
 msgid "Must provide MISO or MOSI pin"
 msgstr ""
 
+#: ports/stm/common-hal/busio/SPI.c
+msgid "Must provide SCK pin"
+msgstr ""
+
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid "Must use a multiple of 6 rgb pins, not %d"
diff --git a/locale/nl.po b/locale/nl.po
index 12a767b18..d39d0bb18 100644
--- a/locale/nl.po
+++ b/locale/nl.po
@@ -1,14 +1,12 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+# SPDX-FileCopyrightText: 2014 MicroPython & CircuitPython contributors (https://github.com/adafruit/circuitpython/graphs/contributors)
 #
+# SPDX-License-Identifier: MIT
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-07-01 10:33-0500\n"
-"PO-Revision-Date: 2020-06-02 19:50+0000\n"
+"POT-Creation-Date: 2020-07-07 14:38-0500\n"
+"PO-Revision-Date: 2020-07-13 17:39+0000\n"
 "Last-Translator: _fonzlate <vooralfred@gmail.com>\n"
 "Language-Team: none\n"
 "Language: nl\n"
@@ -16,7 +14,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=n != 1;\n"
-"X-Generator: Weblate 4.1-dev\n"
+"X-Generator: Weblate 4.2-dev\n"
 
 #: main.c
 msgid ""
@@ -68,7 +66,7 @@ msgstr "%d adres pins en %d RGB pins geven een hoogte van %d aan, niet %d"
 
 #: ports/atmel-samd/common-hal/sdioio/SDCard.c
 msgid "%q failure: %d"
-msgstr ""
+msgstr "%q fout: %d"
 
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
@@ -99,7 +97,7 @@ msgstr "%q moet een tuple van lengte 2 zijn"
 
 #: ports/atmel-samd/common-hal/sdioio/SDCard.c
 msgid "%q pin invalid"
-msgstr ""
+msgstr "%q pin onjuist"
 
 #: shared-bindings/fontio/BuiltinFont.c
 msgid "%q should be an int"
@@ -435,9 +433,10 @@ msgstr "Buffer is te klein"
 msgid "Buffer length %d too big. It must be less than %d"
 msgstr "Buffer lengte %d te groot. Het moet kleiner zijn dan %d"
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
-msgstr ""
+msgstr "Buffer lengte moet een veelvoud van 512 zijn"
 
 #: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
 msgid "Buffer must be at least length 1"
@@ -603,7 +602,11 @@ msgstr "Corrupt raw code"
 
 #: ports/cxd56/common-hal/gnss/GNSS.c
 msgid "Could not initialize GNSS"
-msgstr ""
+msgstr "Kan GNSS niet initialiseren"
+
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr "Kan SDCard niet initialiseren"
 
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
@@ -893,7 +896,7 @@ msgstr "Interne fout #%d"
 
 #: shared-bindings/sdioio/SDCard.c
 msgid "Invalid %q"
-msgstr ""
+msgstr "Ongeldige %q"
 
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
@@ -1002,7 +1005,8 @@ msgstr "Ongeldige pin voor rechter kanaal"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
@@ -1106,6 +1110,10 @@ msgstr "%q moet een subklasse zijn."
 msgid "Must provide MISO or MOSI pin"
 msgstr "MISO of MOSI moeten worden gegeven"
 
+#: ports/stm/common-hal/busio/SPI.c
+msgid "Must provide SCK pin"
+msgstr "SCK pin moet opgegeven worden"
+
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid "Must use a multiple of 6 rgb pins, not %d"
@@ -1411,7 +1419,7 @@ msgstr "Draaiende in veilige modus! Opgeslagen code wordt niet uitgevoerd.\n"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "SD card CSD format not supported"
-msgstr ""
+msgstr "SD kaart CSD formaat niet ondersteund"
 
 #: ports/atmel-samd/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
@@ -1483,7 +1491,7 @@ msgstr "Geef op zijn minst 1 UART pin op"
 
 #: shared-bindings/gnss/GNSS.c
 msgid "System entry must be gnss.SatelliteSystem"
-msgstr ""
+msgstr "Systeem invoer moet gnss.SatelliteSystem zijn"
 
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Temperature read timed out"
@@ -2056,7 +2064,7 @@ msgstr "kan geen niet-'None' waarde naar een net gestartte generator sturen"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "can't set 512 block size"
-msgstr ""
+msgstr "kan geen 512 blokgrootte instellen"
 
 #: py/objnamedtuple.c
 msgid "can't set attribute"
@@ -2187,7 +2195,7 @@ msgstr "kon de Vandermonde matrix niet omkeren"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "couldn't determine SD card version"
-msgstr ""
+msgstr "kon SD kaart versie niet bepalen"
 
 #: extmod/ulab/code/approx.c
 msgid "data must be iterable"
@@ -2754,7 +2762,7 @@ msgstr "negatieve verschuivingstelling (shift count)"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "no SD card"
-msgstr ""
+msgstr "geen SD kaart"
 
 #: py/vm.c
 msgid "no active exception to reraise"
@@ -2779,7 +2787,7 @@ msgstr "geen reset pin beschikbaar"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "no response from SD card"
-msgstr ""
+msgstr "geen antwoord van SD kaart"
 
 #: py/runtime.c
 msgid "no such attribute"
@@ -3075,7 +3083,7 @@ msgstr "de slaapduur mag niet negatief zijn"
 
 #: extmod/ulab/code/ndarray.c
 msgid "slice step can't be zero"
-msgstr ""
+msgstr "segmentstap mag niet nul zijn"
 
 #: py/objslice.c py/sequence.c
 msgid "slice step cannot be zero"
@@ -3095,15 +3103,15 @@ msgstr "sorteerargument moet een ndarray zijn"
 
 #: extmod/ulab/code/filter.c
 msgid "sos array must be of shape (n_section, 6)"
-msgstr ""
+msgstr "sos array moet vorm (n_section, 6) hebben"
 
 #: extmod/ulab/code/filter.c
 msgid "sos[:, 3] should be all ones"
-msgstr ""
+msgstr "sos[:, 3] moeten allemaal 1 zijn"
 
 #: extmod/ulab/code/filter.c
 msgid "sosfilt requires iterable arguments"
-msgstr ""
+msgstr "sosfilt vereist itereerbare argumenten"
 
 #: py/objstr.c
 msgid "start/end indices"
@@ -3192,11 +3200,11 @@ msgstr "timeout moet groter dan 0.0 zijn"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "timeout waiting for v1 card"
-msgstr ""
+msgstr "timeout bij wachten op v1 kaart"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "timeout waiting for v2 card"
-msgstr ""
+msgstr "timeout bij wachten op v2 kaart"
 
 #: shared-bindings/time/__init__.c
 msgid "timestamp out of range for platform time_t"
@@ -3397,15 +3405,15 @@ msgstr "nul-stap"
 
 #: extmod/ulab/code/filter.c
 msgid "zi must be an ndarray"
-msgstr ""
+msgstr "zi moet een ndarray zijn"
 
 #: extmod/ulab/code/filter.c
 msgid "zi must be of float type"
-msgstr ""
+msgstr "zi moet van type float zijn"
 
 #: extmod/ulab/code/filter.c
 msgid "zi must be of shape (n_section, 2)"
-msgstr ""
+msgstr "zi moet vorm (n_section, 2) hebben"
 
 #~ msgid "I2C operation not supported"
 #~ msgstr "I2C actie niet ondersteund"
diff --git a/locale/pl.po b/locale/pl.po
index d626e8ebc..e8b7298a2 100644
--- a/locale/pl.po
+++ b/locale/pl.po
@@ -1,13 +1,12 @@
-# Adafruit CircuitPython Polish Translation
-# Copyright (C) 2019
-# This file is distributed under the same license as the CircuitPython package.
-# Radomir Dopieralski <circuitpython@sheep.art.pl>, 2019.
+# SPDX-FileCopyrightText: 2019 Radomir Dopieralski <circuitpython@sheep.art.pl>
+# SPDX-FileCopyrightText: 2014 MicroPython & CircuitPython contributors (https://github.com/adafruit/circuitpython/graphs/contributors)
 #
+# SPDX-License-Identifier: MIT
 msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-07-01 10:33-0500\n"
+"POT-Creation-Date: 2020-07-07 14:38-0500\n"
 "PO-Revision-Date: 2019-03-19 18:37-0700\n"
 "Last-Translator: Radomir Dopieralski <circuitpython@sheep.art.pl>\n"
 "Language-Team: pl\n"
@@ -428,7 +427,8 @@ msgstr ""
 msgid "Buffer length %d too big. It must be less than %d"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
 msgstr ""
 
@@ -592,6 +592,10 @@ msgstr ""
 msgid "Could not initialize GNSS"
 msgstr ""
 
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Ustawienie UART nie powiodło się"
@@ -987,7 +991,8 @@ msgstr "Zła nóżka dla prawego kanału"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
@@ -1091,6 +1096,10 @@ msgstr ""
 msgid "Must provide MISO or MOSI pin"
 msgstr ""
 
+#: ports/stm/common-hal/busio/SPI.c
+msgid "Must provide SCK pin"
+msgstr ""
+
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid "Must use a multiple of 6 rgb pins, not %d"
diff --git a/locale/pt_BR.po b/locale/pt_BR.po
index 92cf0172d..024608b3d 100644
--- a/locale/pt_BR.po
+++ b/locale/pt_BR.po
@@ -1,14 +1,12 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+# SPDX-FileCopyrightText: 2014 MicroPython & CircuitPython contributors (https://github.com/adafruit/circuitpython/graphs/contributors)
 #
+# SPDX-License-Identifier: MIT
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-07-01 10:33-0500\n"
-"PO-Revision-Date: 2020-07-02 02:02+0000\n"
+"POT-Creation-Date: 2020-07-07 14:38-0500\n"
+"PO-Revision-Date: 2020-07-09 17:23+0000\n"
 "Last-Translator: Wellington Terumi Uemura <wellingtonuemura@gmail.com>\n"
 "Language-Team: \n"
 "Language: pt_BR\n"
@@ -441,7 +439,8 @@ msgstr "O buffer é muito pequeno"
 msgid "Buffer length %d too big. It must be less than %d"
 msgstr "O tamanho do buffer %d é muito grande. Deve ser menor que %d"
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
 msgstr "O comprimento do Buffer deve ser um múltiplo de 512"
 
@@ -612,6 +611,10 @@ msgstr "Código bruto corrompido"
 msgid "Could not initialize GNSS"
 msgstr "Não foi possível inicializar o GNSS"
 
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr "Não foi possível inicializar o SDCard"
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Não foi possível inicializar o UART"
@@ -1009,7 +1012,8 @@ msgstr "Pino inválido para canal direito"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
@@ -1113,6 +1117,10 @@ msgstr "Deve ser uma subclasse %q."
 msgid "Must provide MISO or MOSI pin"
 msgstr "Deve informar os pinos MISO ou MOSI"
 
+#: ports/stm/common-hal/busio/SPI.c
+msgid "Must provide SCK pin"
+msgstr "É obrigatório informar o pino SCK"
+
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid "Must use a multiple of 6 rgb pins, not %d"
@@ -3405,7 +3413,7 @@ msgstr "tipo da saída incorreta"
 
 #: shared-module/displayio/Shape.c
 msgid "x value out of bounds"
-msgstr "a valor x está fora dos limites"
+msgstr "o valor x está fora dos limites"
 
 #: shared-bindings/displayio/Shape.c
 msgid "y should be an int"
diff --git a/locale/sv.po b/locale/sv.po
index f359eba27..b588cbea7 100644
--- a/locale/sv.po
+++ b/locale/sv.po
@@ -1,14 +1,12 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+# SPDX-FileCopyrightText: 2014 MicroPython & CircuitPython contributors (https://github.com/adafruit/circuitpython/graphs/contributors)
 #
+# SPDX-License-Identifier: MIT
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-07-01 10:33-0500\n"
-"PO-Revision-Date: 2020-06-03 18:59+0000\n"
+"POT-Creation-Date: 2020-07-07 14:38-0500\n"
+"PO-Revision-Date: 2020-07-13 17:39+0000\n"
 "Last-Translator: Jonny Bergdahl <jonny@bergdahl.it>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
 "Language: sv\n"
@@ -16,7 +14,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=n != 1;\n"
-"X-Generator: Weblate 4.1-dev\n"
+"X-Generator: Weblate 4.2-dev\n"
 
 #: main.c
 msgid ""
@@ -68,7 +66,7 @@ msgstr "%d adresspinnar och %d RGB-pinnar indikerar en höjd av %d, inte %d"
 
 #: ports/atmel-samd/common-hal/sdioio/SDCard.c
 msgid "%q failure: %d"
-msgstr ""
+msgstr "%q-fel: %d"
 
 #: shared-bindings/microcontroller/Pin.c
 msgid "%q in use"
@@ -99,7 +97,7 @@ msgstr "%q måste vara en tuple av längd 2"
 
 #: ports/atmel-samd/common-hal/sdioio/SDCard.c
 msgid "%q pin invalid"
-msgstr ""
+msgstr "Pinne %q ogiltig"
 
 #: shared-bindings/fontio/BuiltinFont.c
 msgid "%q should be an int"
@@ -435,9 +433,10 @@ msgstr "Bufferten är för liten"
 msgid "Buffer length %d too big. It must be less than %d"
 msgstr "Buffertlängd %d för stor. Den måste vara mindre än %d"
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
-msgstr ""
+msgstr "Buffertlängd måste vara en multipel av 512"
 
 #: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
 msgid "Buffer must be at least length 1"
@@ -603,7 +602,11 @@ msgstr "Korrupt rå kod"
 
 #: ports/cxd56/common-hal/gnss/GNSS.c
 msgid "Could not initialize GNSS"
-msgstr ""
+msgstr "Kan inte initiera GNSS"
+
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr "Kan inte initiera SD-kort"
 
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
@@ -891,7 +894,7 @@ msgstr "Internt fel #%d"
 
 #: shared-bindings/sdioio/SDCard.c
 msgid "Invalid %q"
-msgstr ""
+msgstr "Ogiltig %q"
 
 #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
 #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
@@ -1000,7 +1003,8 @@ msgstr "Ogiltig pinne för höger kanal"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
@@ -1105,6 +1109,10 @@ msgstr "Måste vara en %q-subklass."
 msgid "Must provide MISO or MOSI pin"
 msgstr "Måste ange MISO- eller MOSI-pinne"
 
+#: ports/stm/common-hal/busio/SPI.c
+msgid "Must provide SCK pin"
+msgstr "Måste ange SCK-pinne"
+
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid "Must use a multiple of 6 rgb pins, not %d"
@@ -1407,7 +1415,7 @@ msgstr "Kör i säkert läge! Sparad kod körs inte.\n"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "SD card CSD format not supported"
-msgstr ""
+msgstr "SD-kort CSD-format stöds inte"
 
 #: ports/atmel-samd/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
@@ -1479,7 +1487,7 @@ msgstr "Ange minst en UART-pinne"
 
 #: shared-bindings/gnss/GNSS.c
 msgid "System entry must be gnss.SatelliteSystem"
-msgstr ""
+msgstr "Systeminträdet måste vara gnss. SatellitSystem"
 
 #: ports/stm/common-hal/microcontroller/Processor.c
 msgid "Temperature read timed out"
@@ -2048,7 +2056,7 @@ msgstr "kan inte skicka icke-None värde till nystartad generator"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "can't set 512 block size"
-msgstr ""
+msgstr "kan inte sätta blockstorlek 512"
 
 #: py/objnamedtuple.c
 msgid "can't set attribute"
@@ -2180,7 +2188,7 @@ msgstr "kan inte invertera Vandermonde-matris"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "couldn't determine SD card version"
-msgstr ""
+msgstr "kan inte avgöra SD-kortversion"
 
 #: extmod/ulab/code/approx.c
 msgid "data must be iterable"
@@ -2747,7 +2755,7 @@ msgstr "negativt skiftantal"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "no SD card"
-msgstr ""
+msgstr "inget SD-kort"
 
 #: py/vm.c
 msgid "no active exception to reraise"
@@ -2772,7 +2780,7 @@ msgstr "ingen reset-pinne tillgänglig"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "no response from SD card"
-msgstr ""
+msgstr "inget svar från SD-kort"
 
 #: py/runtime.c
 msgid "no such attribute"
@@ -3068,15 +3076,15 @@ msgstr "värdet för sleep måste vara positivt"
 
 #: extmod/ulab/code/ndarray.c
 msgid "slice step can't be zero"
-msgstr ""
+msgstr "segmentsteg kan inte vara noll"
 
 #: py/objslice.c py/sequence.c
 msgid "slice step cannot be zero"
-msgstr "segmentsteg får inte vara noll"
+msgstr "segmentsteg kan inte vara noll"
 
 #: py/objint.c py/sequence.c
 msgid "small int overflow"
-msgstr "värdet för konvertering till small int överskreds"
+msgstr "värdet för small int överskreds"
 
 #: main.c
 msgid "soft reboot\n"
@@ -3088,15 +3096,15 @@ msgstr "argumentet sort måste vara en ndarray"
 
 #: extmod/ulab/code/filter.c
 msgid "sos array must be of shape (n_section, 6)"
-msgstr ""
+msgstr "sos array måste ha form (n_section, 6)"
 
 #: extmod/ulab/code/filter.c
 msgid "sos[:, 3] should be all ones"
-msgstr ""
+msgstr "sos[:, 3] måste vara ettor"
 
 #: extmod/ulab/code/filter.c
 msgid "sosfilt requires iterable arguments"
-msgstr ""
+msgstr "sosfilt kräver iterable argument"
 
 #: py/objstr.c
 msgid "start/end indices"
@@ -3185,11 +3193,11 @@ msgstr "timeout måste vara >= 0.0"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "timeout waiting for v1 card"
-msgstr ""
+msgstr "timeout för v1-kort"
 
 #: shared-module/sdcardio/SDCard.c
 msgid "timeout waiting for v2 card"
-msgstr ""
+msgstr "timeout för v2-kort"
 
 #: shared-bindings/time/__init__.c
 msgid "timestamp out of range for platform time_t"
@@ -3390,15 +3398,15 @@ msgstr "noll steg"
 
 #: extmod/ulab/code/filter.c
 msgid "zi must be an ndarray"
-msgstr ""
+msgstr "zi måste vara en ndarray"
 
 #: extmod/ulab/code/filter.c
 msgid "zi must be of float type"
-msgstr ""
+msgstr "zi måste vara av typ float"
 
 #: extmod/ulab/code/filter.c
 msgid "zi must be of shape (n_section, 2)"
-msgstr ""
+msgstr "zi måste vara i formen (n_section, 2)"
 
 #~ msgid "I2C operation not supported"
 #~ msgstr "I2C-åtgärd stöds inte"
diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po
index bc9a7253b..0f6d55fd1 100644
--- a/locale/zh_Latn_pinyin.po
+++ b/locale/zh_Latn_pinyin.po
@@ -1,13 +1,12 @@
-# Adafruit CircuitPython Chinese Hanyu Pinyin Translation
-# Copyright (C) 2019
-# This file is distributed under the same license as the CircuitPython package.
-# @hexthat#2155, 2019.
+# SPDX-FileCopyrightText: 2019 @hexthat#2155
+# SPDX-FileCopyrightText: 2014 MicroPython & CircuitPython contributors (https://github.com/adafruit/circuitpython/graphs/contributors)
 #
+# SPDX-License-Identifier: MIT
 msgid ""
 msgstr ""
 "Project-Id-Version: circuitpython-cn\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-07-01 10:33-0500\n"
+"POT-Creation-Date: 2020-07-07 14:38-0500\n"
 "PO-Revision-Date: 2019-04-13 10:10-0700\n"
 "Last-Translator: hexthat\n"
 "Language-Team: Chinese Hanyu Pinyin\n"
@@ -434,7 +433,8 @@ msgstr "Huǎnchōng qū tài xiǎo"
 msgid "Buffer length %d too big. It must be less than %d"
 msgstr "Huǎnchōng qū chángdù%d tài dà. Tā bìxū xiǎoyú%d"
 
-#: ports/atmel-samd/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
+#: ports/atmel-samd/common-hal/sdioio/SDCard.c
+#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
 msgid "Buffer length must be a multiple of 512"
 msgstr ""
 
@@ -600,6 +600,10 @@ msgstr "Sǔnhuài de yuánshǐ dàimǎ"
 msgid "Could not initialize GNSS"
 msgstr ""
 
+#: ports/cxd56/common-hal/sdioio/SDCard.c
+msgid "Could not initialize SDCard"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 msgid "Could not initialize UART"
 msgstr "Wúfǎ chūshǐhuà UART"
@@ -995,7 +999,8 @@ msgstr "Yòuxián tōngdào yǐn jiǎo wúxiào"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
@@ -1099,6 +1104,10 @@ msgstr "Bìxū shì %q zi lèi."
 msgid "Must provide MISO or MOSI pin"
 msgstr "Bìxū tígōng MISO huò MOSI yǐn jiǎo"
 
+#: ports/stm/common-hal/busio/SPI.c
+msgid "Must provide SCK pin"
+msgstr ""
+
 #: shared-bindings/rgbmatrix/RGBMatrix.c
 #, c-format
 msgid "Must use a multiple of 6 rgb pins, not %d"