Merge remote-tracking branch 'adafruit/master' into wdt-nrf

16 files changed, 192 insertions, 128 deletions

diff --git a/locale/ID.po b/locale/ID.po
index ba2662201..0626f461e 100644
--- a/locale/ID.po
+++ b/locale/ID.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-27 11:28+0800\n"
+"POT-Creation-Date: 2020-05-27 10:46-0700\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -372,6 +372,10 @@ msgstr "Bit clock dan word harus memiliki kesamaan pada clock unit"
 msgid "Bit depth must be multiple of 8."
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr "Kedua pin harus mendukung hardware interrut"
@@ -812,7 +816,7 @@ msgstr ""
 msgid "Hardware busy, try alternative pins"
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr ""
 
@@ -891,11 +895,11 @@ msgstr ""
 msgid "Invalid PWM frequency"
 msgstr "Frekuensi PWM tidak valid"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "Invalid SPI pin selection"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "Invalid UART pin selection"
 msgstr ""
 
@@ -971,7 +975,8 @@ msgstr "Pin untuk channel kanan tidak valid"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
 msgstr "Pin-pin tidak valid"
 
@@ -1430,7 +1435,7 @@ msgstr ""
 msgid "Stream missing readinto() or write() method."
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr ""
 
@@ -3111,8 +3116,7 @@ msgstr ""
 msgid "tuple/list required on RHS"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr "tx dan rx keduanya tidak boleh kosong"
diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot
index 420185031..8ab26e497 100644
--- a/locale/circuitpython.pot
+++ b/locale/circuitpython.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-27 11:28+0800\n"
+"POT-Creation-Date: 2020-05-27 10:46-0700\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -368,6 +368,10 @@ msgstr ""
 msgid "Bit depth must be multiple of 8."
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr ""
@@ -801,7 +805,7 @@ msgstr ""
 msgid "Hardware busy, try alternative pins"
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr ""
 
@@ -880,11 +884,11 @@ msgstr ""
 msgid "Invalid PWM frequency"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "Invalid SPI pin selection"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "Invalid UART pin selection"
 msgstr ""
 
@@ -960,7 +964,8 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
 msgstr ""
 
@@ -1414,7 +1419,7 @@ msgstr ""
 msgid "Stream missing readinto() or write() method."
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr ""
 
@@ -3085,8 +3090,7 @@ msgstr ""
 msgid "tuple/list required on RHS"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr ""
diff --git a/locale/cs.po b/locale/cs.po
index 816015699..366393370 100644
--- a/locale/cs.po
+++ b/locale/cs.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-27 11:28+0800\n"
+"POT-Creation-Date: 2020-05-27 10:46-0700\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -368,6 +368,10 @@ msgstr ""
 msgid "Bit depth must be multiple of 8."
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr ""
@@ -801,7 +805,7 @@ msgstr ""
 msgid "Hardware busy, try alternative pins"
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr ""
 
@@ -880,11 +884,11 @@ msgstr ""
 msgid "Invalid PWM frequency"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "Invalid SPI pin selection"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "Invalid UART pin selection"
 msgstr ""
 
@@ -960,7 +964,8 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
 msgstr ""
 
@@ -1414,7 +1419,7 @@ msgstr ""
 msgid "Stream missing readinto() or write() method."
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr ""
 
@@ -3085,8 +3090,7 @@ msgstr ""
 msgid "tuple/list required on RHS"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr ""
diff --git a/locale/de_DE.po b/locale/de_DE.po
index fe738d62a..9e4bd36c0 100644
--- a/locale/de_DE.po
+++ b/locale/de_DE.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-27 11:28+0800\n"
+"POT-Creation-Date: 2020-05-27 10:46-0700\n"
 "PO-Revision-Date: 2020-05-18 02:48+0000\n"
 "Last-Translator: Jeff Epler <jepler@gmail.com>\n"
 "Language-Team: German <https://later.unpythonic.net/projects/circuitpython/"
@@ -379,6 +379,10 @@ msgstr "Bit clock und word select müssen eine clock unit teilen"
 msgid "Bit depth must be multiple of 8."
 msgstr "Bit depth muss ein Vielfaches von 8 sein."
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr "Beide pins müssen Hardware Interrupts unterstützen"
@@ -814,7 +818,7 @@ msgstr "Gruppe voll"
 msgid "Hardware busy, try alternative pins"
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr ""
 
@@ -895,11 +899,11 @@ msgstr ""
 msgid "Invalid PWM frequency"
 msgstr "Ungültige PWM Frequenz"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "Invalid SPI pin selection"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "Invalid UART pin selection"
 msgstr ""
 
@@ -975,7 +979,8 @@ msgstr "Ungültiger Pin für rechten Kanal"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
 msgstr "Ungültige Pins"
 
@@ -1438,7 +1443,7 @@ msgstr "Die Stackgröße sollte mindestens 256 sein"
 msgid "Stream missing readinto() or write() method."
 msgstr "Stream fehlt readinto() oder write() Methode."
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr ""
 
@@ -3133,8 +3138,7 @@ msgstr "tupel/list hat falsche Länge"
 msgid "tuple/list required on RHS"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr "tx und rx können nicht beide None sein"
diff --git a/locale/en_US.po b/locale/en_US.po
index 638e70f66..5ef3da275 100644
--- a/locale/en_US.po
+++ b/locale/en_US.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-27 11:28+0800\n"
+"POT-Creation-Date: 2020-05-27 10:46-0700\n"
 "PO-Revision-Date: 2018-07-27 11:55-0700\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -368,6 +368,10 @@ msgstr ""
 msgid "Bit depth must be multiple of 8."
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr ""
@@ -801,7 +805,7 @@ msgstr ""
 msgid "Hardware busy, try alternative pins"
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr ""
 
@@ -880,11 +884,11 @@ msgstr ""
 msgid "Invalid PWM frequency"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "Invalid SPI pin selection"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "Invalid UART pin selection"
 msgstr ""
 
@@ -960,7 +964,8 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
 msgstr ""
 
@@ -1414,7 +1419,7 @@ msgstr ""
 msgid "Stream missing readinto() or write() method."
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr ""
 
@@ -3085,8 +3090,7 @@ msgstr ""
 msgid "tuple/list required on RHS"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr ""
diff --git a/locale/en_x_pirate.po b/locale/en_x_pirate.po
index fa94bfa1f..f131144ae 100644
--- a/locale/en_x_pirate.po
+++ b/locale/en_x_pirate.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-27 11:28+0800\n"
+"POT-Creation-Date: 2020-05-27 10:46-0700\n"
 "PO-Revision-Date: 2020-03-30 22:11+0000\n"
 "Last-Translator: Tannewt <devnull@unpythonic.net>\n"
 "Language-Team: English <https://later.unpythonic.net/projects/circuitpython/"
@@ -377,6 +377,10 @@ msgstr ""
 msgid "Bit depth must be multiple of 8."
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr ""
@@ -810,7 +814,7 @@ msgstr ""
 msgid "Hardware busy, try alternative pins"
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr ""
 
@@ -889,11 +893,11 @@ msgstr ""
 msgid "Invalid PWM frequency"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "Invalid SPI pin selection"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "Invalid UART pin selection"
 msgstr ""
 
@@ -969,7 +973,8 @@ msgstr "Belay that! Invalid pin for starboard-side channel"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
 msgstr ""
 
@@ -1423,7 +1428,7 @@ msgstr ""
 msgid "Stream missing readinto() or write() method."
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr ""
 
@@ -3094,8 +3099,7 @@ msgstr ""
 msgid "tuple/list required on RHS"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr ""
diff --git a/locale/es.po b/locale/es.po
index a2dcdbd11..5aeb17d45 100644
--- a/locale/es.po
+++ b/locale/es.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-27 11:28+0800\n"
+"POT-Creation-Date: 2020-05-27 10:46-0700\n"
 "PO-Revision-Date: 2020-05-17 20:56+0000\n"
 "Last-Translator: Jeff Epler <jepler@gmail.com>\n"
 "Language-Team: \n"
@@ -375,6 +375,10 @@ msgstr "Bit clock y word select deben compartir una unidad de reloj"
 msgid "Bit depth must be multiple of 8."
 msgstr "Bits depth debe ser múltiplo de 8."
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr "Ambos pines deben soportar interrupciones por hardware"
@@ -808,7 +812,7 @@ msgstr "Group lleno"
 msgid "Hardware busy, try alternative pins"
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr ""
 
@@ -889,11 +893,11 @@ msgstr ""
 msgid "Invalid PWM frequency"
 msgstr "Frecuencia PWM inválida"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "Invalid SPI pin selection"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "Invalid UART pin selection"
 msgstr ""
 
@@ -969,7 +973,8 @@ msgstr "Pin inválido para canal derecho"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
 msgstr "pines inválidos"
 
@@ -1432,7 +1437,7 @@ msgstr "El tamaño de la pila debe ser de al menos 256"
 msgid "Stream missing readinto() or write() method."
 msgstr "A Stream le falta el método readinto() o write()."
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr ""
 
@@ -3128,8 +3133,7 @@ msgstr "tupla/lista tiene una longitud incorrecta"
 msgid "tuple/list required on RHS"
 msgstr "tuple/lista se require en RHS"
 
-#: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr "Ambos tx y rx no pueden ser None"
diff --git a/locale/fil.po b/locale/fil.po
index 3593fa7e9..551b57a05 100644
--- a/locale/fil.po
+++ b/locale/fil.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-27 11:28+0800\n"
+"POT-Creation-Date: 2020-05-27 10:46-0700\n"
 "PO-Revision-Date: 2018-12-20 22:15-0800\n"
 "Last-Translator: Timothy <me@timothygarcia.ca>\n"
 "Language-Team: fil\n"
@@ -374,6 +374,10 @@ msgstr "Ang bit clock at word select dapat makibahagi sa isang clock unit"
 msgid "Bit depth must be multiple of 8."
 msgstr "Bit depth ay dapat multiple ng 8."
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr "Ang parehong mga pin ay dapat na sumusuporta sa hardware interrupts"
@@ -815,7 +819,7 @@ msgstr "Puno ang group"
 msgid "Hardware busy, try alternative pins"
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr ""
 
@@ -896,11 +900,11 @@ msgstr ""
 msgid "Invalid PWM frequency"
 msgstr "Mali ang PWM frequency"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "Invalid SPI pin selection"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "Invalid UART pin selection"
 msgstr ""
 
@@ -976,7 +980,8 @@ msgstr "Mali ang pin para sa kanang channel"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
 msgstr "Mali ang pins"
 
@@ -1437,7 +1442,7 @@ msgstr "Ang laki ng stack ay dapat na hindi bababa sa 256"
 msgid "Stream missing readinto() or write() method."
 msgstr "Stream kulang ng readinto() o write() method."
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr ""
 
@@ -3141,8 +3146,7 @@ msgstr "mali ang haba ng tuple/list"
 msgid "tuple/list required on RHS"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr "tx at rx hindi pwedeng parehas na None"
diff --git a/locale/fr.po b/locale/fr.po
index c9b5bf74a..30016104c 100644
--- a/locale/fr.po
+++ b/locale/fr.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: 0.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-27 11:28+0800\n"
+"POT-Creation-Date: 2020-05-27 10:46-0700\n"
 "PO-Revision-Date: 2020-05-26 19:37+0000\n"
 "Last-Translator: Jeff Epler <jepler@gmail.com>\n"
 "Language-Team: French <https://later.unpythonic.net/projects/circuitpython/"
@@ -386,6 +386,10 @@ msgstr "'bit clock' et 'word select' doivent partager une horloge"
 msgid "Bit depth must be multiple of 8."
 msgstr "La profondeur de bit doit être un multiple de 8."
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr "Les deux entrées doivent supporter les interruptions matérielles"
@@ -830,7 +834,7 @@ msgstr "Groupe plein"
 msgid "Hardware busy, try alternative pins"
 msgstr "Matériel occupé, essayez d'autres broches"
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr "Matériel utilisé, essayez d'autres broches"
 
@@ -911,11 +915,11 @@ msgstr "Sélection de broches I2C non valide"
 msgid "Invalid PWM frequency"
 msgstr "Fréquence de PWM invalide"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "Invalid SPI pin selection"
 msgstr "Sélection de broches SPI non valide"
 
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "Invalid UART pin selection"
 msgstr "Sélection de broches UART non valide"
 
@@ -991,7 +995,8 @@ msgstr "Broche invalide pour le canal droit"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
 msgstr "Broches invalides"
 
@@ -1458,7 +1463,7 @@ msgstr "La pile doit être au moins de 256"
 msgid "Stream missing readinto() or write() method."
 msgstr "Il manque une méthode readinto() ou write() au flux."
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr "Fournissez au moins une broche UART"
 
@@ -3181,8 +3186,7 @@ msgstr "tuple/liste a une mauvaise longueur"
 msgid "tuple/list required on RHS"
 msgstr "tuple ou liste requis en partie droite"
 
-#: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr "tx et rx ne peuvent être 'None' tous les deux"
diff --git a/locale/it_IT.po b/locale/it_IT.po
index 5a4e3ac5a..d4d2fadbe 100644
--- a/locale/it_IT.po
+++ b/locale/it_IT.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-27 11:28+0800\n"
+"POT-Creation-Date: 2020-05-27 10:46-0700\n"
 "PO-Revision-Date: 2018-10-02 16:27+0200\n"
 "Last-Translator: Enrico Paganin <enrico.paganin@mail.com>\n"
 "Language-Team: \n"
@@ -374,6 +374,10 @@ msgstr ""
 msgid "Bit depth must be multiple of 8."
 msgstr "La profondità di bit deve essere multipla di 8."
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr "Entrambi i pin devono supportare gli interrupt hardware"
@@ -815,7 +819,7 @@ msgstr "Gruppo pieno"
 msgid "Hardware busy, try alternative pins"
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr ""
 
@@ -896,11 +900,11 @@ msgstr ""
 msgid "Invalid PWM frequency"
 msgstr "Frequenza PWM non valida"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "Invalid SPI pin selection"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "Invalid UART pin selection"
 msgstr ""
 
@@ -978,7 +982,8 @@ msgstr "Pin non valido per il canale destro"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
 msgstr "Pin non validi"
 
@@ -1448,7 +1453,7 @@ msgstr "La dimensione dello stack deve essere almeno 256"
 msgid "Stream missing readinto() or write() method."
 msgstr "Metodi mancanti readinto() o write() allo stream."
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr ""
 
@@ -3148,8 +3153,7 @@ msgstr "tupla/lista ha la lunghezza sbagliata"
 msgid "tuple/list required on RHS"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr "tx e rx non possono essere entrambi None"
diff --git a/locale/ko.po b/locale/ko.po
index 29f825397..cbbeccc82 100644
--- a/locale/ko.po
+++ b/locale/ko.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-27 11:28+0800\n"
+"POT-Creation-Date: 2020-05-27 10:46-0700\n"
 "PO-Revision-Date: 2019-05-06 14:22-0700\n"
 "Last-Translator: \n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -372,6 +372,10 @@ msgstr ""
 msgid "Bit depth must be multiple of 8."
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr ""
@@ -805,7 +809,7 @@ msgstr ""
 msgid "Hardware busy, try alternative pins"
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr ""
 
@@ -884,11 +888,11 @@ msgstr ""
 msgid "Invalid PWM frequency"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "Invalid SPI pin selection"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "Invalid UART pin selection"
 msgstr ""
 
@@ -964,7 +968,8 @@ msgstr "오른쪽 채널 핀이 잘못되었습니다"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
 msgstr "핀이 유효하지 않습니다"
 
@@ -1418,7 +1423,7 @@ msgstr ""
 msgid "Stream missing readinto() or write() method."
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr ""
 
@@ -3090,8 +3095,7 @@ msgstr ""
 msgid "tuple/list required on RHS"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr ""
diff --git a/locale/nl.po b/locale/nl.po
index d1477d83d..f14f449d4 100644
--- a/locale/nl.po
+++ b/locale/nl.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-27 11:28+0800\n"
+"POT-Creation-Date: 2020-05-27 10:46-0700\n"
 "PO-Revision-Date: 2020-05-19 17:08+0000\n"
 "Last-Translator: Dustin Watts <dustin_watts@yahoo.com>\n"
 "Language-Team: none\n"
@@ -378,6 +378,10 @@ msgstr "Bit clock en word select moeten een clock eenheid delen"
 msgid "Bit depth must be multiple of 8."
 msgstr "Bit diepte moet een meervoud van 8 zijn."
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr "Beide pinnen moeten hardware interrupts ondersteunen"
@@ -819,7 +823,7 @@ msgstr "Groep is vol"
 msgid "Hardware busy, try alternative pins"
 msgstr "Hardware bezig, probeer alternatieve pinnen"
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr "Hardware in gebruik, probeer alternatieve pinnen"
 
@@ -900,11 +904,11 @@ msgstr "Ongeldige I2C pin selectie"
 msgid "Invalid PWM frequency"
 msgstr "Ongeldige PWM frequentie"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "Invalid SPI pin selection"
 msgstr "Ongeldige SPI pin selectie"
 
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "Invalid UART pin selection"
 msgstr "Ongeldige UART pin selectie"
 
@@ -980,7 +984,8 @@ msgstr "Ongeldige pin voor rechter kanaal"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
 msgstr "Ongeldige pinnen"
 
@@ -1448,7 +1453,7 @@ msgstr "Stack grootte moet op zijn minst 256 zijn"
 msgid "Stream missing readinto() or write() method."
 msgstr "Stream mist readinto() of write() methode."
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr "Geef op zijn minst 1 UART pin op"
 
@@ -3134,8 +3139,7 @@ msgstr ""
 msgid "tuple/list required on RHS"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr ""
diff --git a/locale/pl.po b/locale/pl.po
index a5064d6bd..e8c3c04e8 100644
--- a/locale/pl.po
+++ b/locale/pl.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-27 11:28+0800\n"
+"POT-Creation-Date: 2020-05-27 10:46-0700\n"
 "PO-Revision-Date: 2019-03-19 18:37-0700\n"
 "Last-Translator: Radomir Dopieralski <circuitpython@sheep.art.pl>\n"
 "Language-Team: pl\n"
@@ -371,6 +371,10 @@ msgstr "Zegar bitowy i wybór słowa muszą współdzielić jednostkę zegara"
 msgid "Bit depth must be multiple of 8."
 msgstr "Głębia musi być wielokrotnością 8."
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr "Obie nóżki muszą wspierać przerwania sprzętowe"
@@ -804,7 +808,7 @@ msgstr "Grupa pełna"
 msgid "Hardware busy, try alternative pins"
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr ""
 
@@ -885,11 +889,11 @@ msgstr ""
 msgid "Invalid PWM frequency"
 msgstr "Zła częstotliwość PWM"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "Invalid SPI pin selection"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "Invalid UART pin selection"
 msgstr ""
 
@@ -965,7 +969,8 @@ msgstr "Zła nóżka dla prawego kanału"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
 msgstr "Złe nóżki"
 
@@ -1419,7 +1424,7 @@ msgstr "Stos musi mieć co najmniej 256 bajtów"
 msgid "Stream missing readinto() or write() method."
 msgstr "Strumień nie ma metod readinto() lub write()."
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr ""
 
@@ -3096,8 +3101,7 @@ msgstr "krotka/lista ma złą długość"
 msgid "tuple/list required on RHS"
 msgstr "wymagana krotka/lista po prawej stronie"
 
-#: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr "tx i rx nie mogą być oba None"
diff --git a/locale/pt_BR.po b/locale/pt_BR.po
index d0d81bccb..8045ed9ba 100644
--- a/locale/pt_BR.po
+++ b/locale/pt_BR.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-27 11:28+0800\n"
+"POT-Creation-Date: 2020-05-27 10:46-0700\n"
 "PO-Revision-Date: 2018-10-02 21:14-0000\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -371,6 +371,10 @@ msgstr ""
 msgid "Bit depth must be multiple of 8."
 msgstr ""
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr "Ambos os pinos devem suportar interrupções de hardware"
@@ -810,7 +814,7 @@ msgstr "Grupo cheio"
 msgid "Hardware busy, try alternative pins"
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr ""
 
@@ -889,11 +893,11 @@ msgstr ""
 msgid "Invalid PWM frequency"
 msgstr "Frequência PWM inválida"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "Invalid SPI pin selection"
 msgstr ""
 
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "Invalid UART pin selection"
 msgstr ""
 
@@ -971,7 +975,8 @@ msgstr "Pino inválido para canal direito"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
 msgstr "Pinos inválidos"
 
@@ -1431,7 +1436,7 @@ msgstr "O tamanho da pilha deve ser pelo menos 256"
 msgid "Stream missing readinto() or write() method."
 msgstr ""
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr ""
 
@@ -3109,8 +3114,7 @@ msgstr ""
 msgid "tuple/list required on RHS"
 msgstr ""
 
-#: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr "TX e RX não podem ser ambos"
diff --git a/locale/sv.po b/locale/sv.po
index 25f8f34da..803d9a0c6 100644
--- a/locale/sv.po
+++ b/locale/sv.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-27 11:28+0800\n"
+"POT-Creation-Date: 2020-05-27 10:46-0700\n"
 "PO-Revision-Date: 2020-05-20 18:32+0000\n"
 "Last-Translator: Jonny Bergdahl <jonny@bergdahl.it>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -378,6 +378,10 @@ msgstr "Bitklocka och ordval måste dela en klockenhet"
 msgid "Bit depth must be multiple of 8."
 msgstr "Bitdjupet måste vara multipel av 8."
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr "Båda pinnarna måste stödja maskinvaruavbrott"
@@ -818,7 +822,7 @@ msgstr "Gruppen är full"
 msgid "Hardware busy, try alternative pins"
 msgstr "Hårdvaran är upptagen, prova alternativa pinnar"
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr "Hårdvaran används redan, prova alternativa pinnar"
 
@@ -899,11 +903,11 @@ msgstr "Ogiltigt val av I2C-pinne"
 msgid "Invalid PWM frequency"
 msgstr "Ogiltig PWM-frekvens"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "Invalid SPI pin selection"
 msgstr "Ogiltigt val av SPI-pinne"
 
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "Invalid UART pin selection"
 msgstr "Ogiltigt val av UART-pinne"
 
@@ -979,7 +983,8 @@ msgstr "Ogiltig pinne för höger kanal"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
 msgstr "Ogiltiga pinnar"
 
@@ -1445,7 +1450,7 @@ msgstr "Stackstorleken måste vara minst 256"
 msgid "Stream missing readinto() or write() method."
 msgstr "Stream saknar readinto() eller write() metod."
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr "Ange minst en UART-pinne"
 
@@ -3142,8 +3147,7 @@ msgstr "tupel/lista har fel längd"
 msgid "tuple/list required on RHS"
 msgstr "tupel/lista krävs för RHS"
 
-#: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr "tx och rx kan inte båda vara None"
diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po
index 19b79f2c5..3f61b7788 100644
--- a/locale/zh_Latn_pinyin.po
+++ b/locale/zh_Latn_pinyin.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: circuitpython-cn\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-05-27 11:28+0800\n"
+"POT-Creation-Date: 2020-05-27 10:46-0700\n"
 "PO-Revision-Date: 2019-04-13 10:10-0700\n"
 "Last-Translator: hexthat\n"
 "Language-Team: Chinese Hanyu Pinyin\n"
@@ -377,6 +377,10 @@ msgstr "Bǐtè shízhōng hé dānzì xuǎnzé bìxū gòngxiǎng shízhōng dā
 msgid "Bit depth must be multiple of 8."
 msgstr "Bǐtè shēndù bìxū shì 8 bèi yǐshàng."
 
+#: ports/mimxrt10xx/common-hal/busio/UART.c
+msgid "Both RX and TX required for flow control"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
 msgid "Both pins must support hardware interrupts"
 msgstr "Liǎng gè yǐn jiǎo dōu bìxū zhīchí yìngjiàn zhōngduàn"
@@ -812,7 +816,7 @@ msgstr "Fēnzǔ yǐ mǎn"
 msgid "Hardware busy, try alternative pins"
 msgstr "Yìngjiàn máng, qǐng chángshì qítā zhēnjiǎo"
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Hardware in use, try alternative pins"
 msgstr "Shǐyòng de yìngjiàn, qǐng chángshì qítā yǐn jiǎo"
 
@@ -893,11 +897,11 @@ msgstr "Wúxiào de I2C yǐn jiǎo xuǎnzé"
 msgid "Invalid PWM frequency"
 msgstr "Wúxiào de PWM pínlǜ"
 
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
 msgid "Invalid SPI pin selection"
 msgstr "Wúxiào de SPI yǐn jiǎo xuǎnzé"
 
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
 msgid "Invalid UART pin selection"
 msgstr "Wúxiào de UART yǐn jiǎo xuǎnzé"
 
@@ -973,7 +977,8 @@ msgstr "Yòuxián tōngdào yǐn jiǎo wúxiào"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
 #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
-#: ports/cxd56/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/cxd56/common-hal/busio/UART.c ports/mimxrt10xx/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
 msgid "Invalid pins"
 msgstr "Wúxiào de yǐn jiǎo"
 
@@ -1433,7 +1438,7 @@ msgstr "Duīzhàn dàxiǎo bìxū zhìshǎo 256"
 msgid "Stream missing readinto() or write() method."
 msgstr "Liú quēshǎo readinto() huò write() fāngfǎ."
 
-#: ports/stm/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "Supply at least one UART pin"
 msgstr "Dìngyì zhìshǎo yīgè UART yǐn jiǎo"
 
@@ -3126,8 +3131,7 @@ msgstr "yuán zǔ/lièbiǎo chángdù cuòwù"
 msgid "tuple/list required on RHS"
 msgstr "RHS yāoqiú de yuán zǔ/lièbiǎo"
 
-#: ports/atmel-samd/common-hal/busio/UART.c
-#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
+#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
 #: shared-bindings/busio/UART.c
 msgid "tx and rx cannot both be None"
 msgstr "tx hé rx bùnéng dōu shì wú"