Update translation files

Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.

Translation: CircuitPython/main
Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/

16 files changed, 2352 insertions, 80 deletions

diff --git a/locale/ID.po b/locale/ID.po
index e11123398..651ecff3f 100644
--- a/locale/ID.po
+++ b/locale/ID.po
@@ -344,6 +344,10 @@ msgstr "Semua perangkat UART sedang digunakan"
 msgid "All event channels in use"
 msgstr "Semua channel event sedang digunakan"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "All state machines in use"
+msgstr ""
+
 #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "All sync event channels in use"
 msgstr "Semua channel event yang disinkronisasi sedang digunakan"
@@ -392,6 +396,7 @@ msgstr "AnalogIn tidak didukung pada pin yang diberikan"
 #: ports/cxd56/common-hal/analogio/AnalogOut.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c
 #: ports/nrf/common-hal/analogio/AnalogOut.c
+#: ports/raspberrypi/common-hal/analogio/AnalogOut.c
 msgid "AnalogOut functionality not supported"
 msgstr "fungsionalitas AnalogOut tidak didukung"
 
@@ -593,6 +598,7 @@ msgstr "Tidak dapat menghapus nilai"
 #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
 #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c
 #: ports/nrf/common-hal/digitalio/DigitalInOut.c
+#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c
 msgid "Cannot get pull while in output mode"
 msgstr "Tidak bisa mendapatkan pull pada saat mode output"
 
@@ -882,7 +888,8 @@ msgstr "Error pada regex"
 msgid "Error: Failure to bind"
 msgstr ""
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
 #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 #: shared-bindings/terminalio/Terminal.c
@@ -1064,6 +1071,10 @@ msgstr "operasi I/O pada file tertutup"
 msgid "I2C Init Error"
 msgstr "Gagal Inisialisasi I2C"
 
+#: ports/raspberrypi/common-hal/busio/I2C.c
+msgid "I2C peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiobusio/I2SOut.c
 msgid "I2SOut not available"
 msgstr ""
@@ -1089,6 +1100,10 @@ msgstr ""
 msgid "Incorrect buffer size"
 msgstr "Ukuran penyangga salah"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Init program size invalid"
+msgstr ""
+
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "Initialization failed due to lack of memory"
 msgstr ""
@@ -1101,6 +1116,31 @@ msgstr ""
 msgid "Input/output error"
 msgstr "Kesalahan input/output"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d jumps on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts in more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts out more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d uses extra pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d waits on input outside of count"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 msgid "Insufficient authentication"
 msgstr "Otentikasi tidak cukup"
@@ -1152,7 +1192,7 @@ msgstr "Pin DAC yang diberikan tidak valid"
 
 #: ports/atmel-samd/common-hal/pwmio/PWMOut.c
 #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c
-#: shared-bindings/pwmio/PWMOut.c
+#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c
 msgid "Invalid PWM frequency"
 msgstr "Frekuensi PWM tidak valid"
 
@@ -1246,6 +1286,8 @@ msgstr "Pin untuk channel kanan tidak valid"
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/SPI.c
 msgid "Invalid pins"
 msgstr "Pin-pin tidak valid"
 
@@ -1367,6 +1409,36 @@ msgstr "Penundaan mulai mikrofon harus dalam kisaran 0,0 hingga 1,0"
 msgid "Missing MISO or MOSI Pin"
 msgstr "Tidak menemukan Pin MISO atau MOSI"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d reads pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d waits based on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d writes pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_set_pin. Instruction %d sets pin(s)"
+msgstr ""
+
 #: shared-bindings/displayio/Group.c
 msgid "Must be a %q subclass."
 msgstr "Harus berupa subclass %q."
@@ -1420,14 +1492,14 @@ msgstr "Tidak ada Pin MOSI"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr "Tidak pin RX"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
 msgstr "Tidak ada pin TX"
 
@@ -1484,6 +1556,10 @@ msgstr "Tidak ada lagi penghitung waktu yang tersedia pada pin ini."
 msgid "No network with that ssid"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "No out in program"
+msgstr ""
+
 #: shared-module/touchio/TouchIn.c
 msgid "No pulldown on pin; 1Mohm recommended"
 msgstr "Tidak ada pull-down pada pin; 1Mohm direkomendasikan"
@@ -1541,6 +1617,10 @@ msgstr "Parity ganjil tidak didukung"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Hanya 8 atau 16 bit mono dengan "
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Only IN/OUT of up to 8 supported"
+msgstr ""
+
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr ""
@@ -1619,6 +1699,7 @@ msgstr ""
 "konstruksi."
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr "ParallelBus belum didukung"
@@ -1631,11 +1712,20 @@ msgstr ""
 msgid "Permission denied"
 msgstr "Izin ditolak"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Pin count must be at least 1"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Pin count too large"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 #: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
+#: ports/raspberrypi/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
 msgid "Pin does not have ADC capabilities"
 msgstr "Pin tidak mempunya kemampuan untuk ADC (Analog Digital Converter)"
@@ -1699,10 +1789,34 @@ msgstr ""
 msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does IN without loading ISR"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does OUT without loading OSR"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program must contain at least one 16-bit instruction."
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program size invalid"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program too large"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr "Pull tidak digunakan saat arah output."
 
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
+msgid "RAISE mode is not implemented"
+msgstr ""
+
 #: ports/stm/common-hal/os/__init__.c
 msgid "RNG DeInit Error"
 msgstr "Kesalahan DeInit RNG"
@@ -1786,6 +1900,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA atau SCL membutuhkan pull up"
 
@@ -1807,6 +1922,10 @@ msgstr "Kesalahan Init SPI"
 msgid "SPI Re-initialization error"
 msgstr "Kesalahan Inisialisasi ulang SPI"
 
+#: ports/raspberrypi/common-hal/busio/SPI.c
+msgid "SPI peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiomixer/Mixer.c
 msgid "Sample rate must be positive"
 msgstr "Tingkat sampel harus positif"
@@ -1837,6 +1956,14 @@ msgstr "Serializer sedang digunakan"
 msgid "Server side context cannot have hostname"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Set pin count must be between 1 and 5"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Side set pin count must be between 1 and 5"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Size not supported"
 msgstr ""
@@ -2009,6 +2136,10 @@ msgstr "Kesalahan Init UART"
 msgid "UART Re-init error"
 msgstr "Kesalahan Re-init UART"
 
+#: ports/raspberrypi/common-hal/busio/UART.c
+msgid "UART not yet supported"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr "Kesalahan penulisan UART"
@@ -2115,7 +2246,8 @@ msgstr ""
 "perangkat lain ditolak atau diabaikan."
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Baudrate tidak didukung"
 
@@ -2167,6 +2299,7 @@ msgid "WARNING: Your code filename has two extensions\n"
 msgstr "PERINGATAN: Nama file kode anda mempunyai dua ekstensi\n"
 
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
 msgstr ""
 
@@ -3573,6 +3706,14 @@ msgstr ""
 msgid "pressing both buttons at start up.\n"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "pull_threshold must be between 1 and 32"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "push_threshold must be between 1 and 32"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr "antrian meluap (overflow)"
@@ -3776,6 +3917,7 @@ msgstr ""
 
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "timeout duration exceeded the maximum supported value"
 msgstr ""
 
diff --git a/locale/cs.po b/locale/cs.po
index 9181d1f70..dfb4b5366 100644
--- a/locale/cs.po
+++ b/locale/cs.po
@@ -342,6 +342,10 @@ msgstr ""
 msgid "All event channels in use"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "All state machines in use"
+msgstr ""
+
 #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "All sync event channels in use"
 msgstr ""
@@ -390,6 +394,7 @@ msgstr ""
 #: ports/cxd56/common-hal/analogio/AnalogOut.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c
 #: ports/nrf/common-hal/analogio/AnalogOut.c
+#: ports/raspberrypi/common-hal/analogio/AnalogOut.c
 msgid "AnalogOut functionality not supported"
 msgstr ""
 
@@ -589,6 +594,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
 #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c
 #: ports/nrf/common-hal/digitalio/DigitalInOut.c
+#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c
 msgid "Cannot get pull while in output mode"
 msgstr ""
 
@@ -866,7 +872,8 @@ msgstr ""
 msgid "Error: Failure to bind"
 msgstr ""
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
 #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 #: shared-bindings/terminalio/Terminal.c
@@ -1048,6 +1055,10 @@ msgstr ""
 msgid "I2C Init Error"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/busio/I2C.c
+msgid "I2C peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiobusio/I2SOut.c
 msgid "I2SOut not available"
 msgstr ""
@@ -1071,6 +1082,10 @@ msgstr ""
 msgid "Incorrect buffer size"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Init program size invalid"
+msgstr ""
+
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "Initialization failed due to lack of memory"
 msgstr ""
@@ -1083,6 +1098,31 @@ msgstr ""
 msgid "Input/output error"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d jumps on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts in more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts out more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d uses extra pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d waits on input outside of count"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 msgid "Insufficient authentication"
 msgstr ""
@@ -1134,7 +1174,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/pwmio/PWMOut.c
 #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c
-#: shared-bindings/pwmio/PWMOut.c
+#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c
 msgid "Invalid PWM frequency"
 msgstr ""
 
@@ -1228,6 +1268,8 @@ msgstr ""
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/SPI.c
 msgid "Invalid pins"
 msgstr ""
 
@@ -1349,6 +1391,36 @@ msgstr ""
 msgid "Missing MISO or MOSI Pin"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d reads pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d waits based on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d writes pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_set_pin. Instruction %d sets pin(s)"
+msgstr ""
+
 #: shared-bindings/displayio/Group.c
 msgid "Must be a %q subclass."
 msgstr ""
@@ -1402,14 +1474,14 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
 msgstr ""
 
@@ -1466,6 +1538,10 @@ msgstr ""
 msgid "No network with that ssid"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "No out in program"
+msgstr ""
+
 #: shared-module/touchio/TouchIn.c
 msgid "No pulldown on pin; 1Mohm recommended"
 msgstr ""
@@ -1521,6 +1597,10 @@ msgstr ""
 msgid "Only 8 or 16 bit mono with "
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Only IN/OUT of up to 8 supported"
+msgstr ""
+
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr ""
@@ -1593,6 +1673,7 @@ msgid ""
 msgstr ""
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr ""
@@ -1605,11 +1686,20 @@ msgstr ""
 msgid "Permission denied"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Pin count must be at least 1"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Pin count too large"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 #: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
+#: ports/raspberrypi/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
 msgid "Pin does not have ADC capabilities"
 msgstr ""
@@ -1670,10 +1760,34 @@ msgstr ""
 msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does IN without loading ISR"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does OUT without loading OSR"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program must contain at least one 16-bit instruction."
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program size invalid"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program too large"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr ""
 
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
+msgid "RAISE mode is not implemented"
+msgstr ""
+
 #: ports/stm/common-hal/os/__init__.c
 msgid "RNG DeInit Error"
 msgstr ""
@@ -1756,6 +1870,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr ""
 
@@ -1777,6 +1892,10 @@ msgstr ""
 msgid "SPI Re-initialization error"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/busio/SPI.c
+msgid "SPI peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiomixer/Mixer.c
 msgid "Sample rate must be positive"
 msgstr ""
@@ -1807,6 +1926,14 @@ msgstr ""
 msgid "Server side context cannot have hostname"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Set pin count must be between 1 and 5"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Side set pin count must be between 1 and 5"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Size not supported"
 msgstr ""
@@ -1971,6 +2098,10 @@ msgstr ""
 msgid "UART Re-init error"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/busio/UART.c
+msgid "UART not yet supported"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr ""
@@ -2075,7 +2206,8 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr ""
 
@@ -2126,6 +2258,7 @@ msgid "WARNING: Your code filename has two extensions\n"
 msgstr ""
 
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
 msgstr ""
 
@@ -3524,6 +3657,14 @@ msgstr ""
 msgid "pressing both buttons at start up.\n"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "pull_threshold must be between 1 and 32"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "push_threshold must be between 1 and 32"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr ""
@@ -3727,6 +3868,7 @@ msgstr ""
 
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "timeout duration exceeded the maximum supported value"
 msgstr ""
 
diff --git a/locale/de_DE.po b/locale/de_DE.po
index 8d8f2d521..f613426b5 100644
--- a/locale/de_DE.po
+++ b/locale/de_DE.po
@@ -343,6 +343,10 @@ msgstr "Alle UART-Peripheriegeräte sind in Benutzung"
 msgid "All event channels in use"
 msgstr "Alle event Kanäle werden benutzt"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "All state machines in use"
+msgstr ""
+
 #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "All sync event channels in use"
 msgstr "Alle sync event Kanäle werden benutzt"
@@ -391,6 +395,7 @@ msgstr "AnalogIn ist an diesem Pin nicht unterstützt"
 #: ports/cxd56/common-hal/analogio/AnalogOut.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c
 #: ports/nrf/common-hal/analogio/AnalogOut.c
+#: ports/raspberrypi/common-hal/analogio/AnalogOut.c
 msgid "AnalogOut functionality not supported"
 msgstr "AnalogOut-Funktion wird nicht unterstützt"
 
@@ -594,6 +599,7 @@ msgstr "Kann Werte nicht löschen"
 #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
 #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c
 #: ports/nrf/common-hal/digitalio/DigitalInOut.c
+#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c
 msgid "Cannot get pull while in output mode"
 msgstr "Pull up im Ausgabemodus nicht möglich"
 
@@ -878,7 +884,8 @@ msgstr "Fehler in regex"
 msgid "Error: Failure to bind"
 msgstr ""
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
 #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 #: shared-bindings/terminalio/Terminal.c
@@ -1063,6 +1070,10 @@ msgstr "Lese/Schreibe-operation an geschlossener Datei"
 msgid "I2C Init Error"
 msgstr "I2C-Init-Fehler"
 
+#: ports/raspberrypi/common-hal/busio/I2C.c
+msgid "I2C peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiobusio/I2SOut.c
 msgid "I2SOut not available"
 msgstr "I2SOut nicht verfügbar"
@@ -1088,6 +1099,10 @@ msgstr ""
 msgid "Incorrect buffer size"
 msgstr "Inkorrekte Puffergröße"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Init program size invalid"
+msgstr ""
+
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "Initialization failed due to lack of memory"
 msgstr "Initialisierung aufgrund von Speichermangel fehlgeschlagen"
@@ -1100,6 +1115,31 @@ msgstr ""
 msgid "Input/output error"
 msgstr "Eingabe-/Ausgabefehler"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d jumps on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts in more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts out more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d uses extra pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d waits on input outside of count"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 msgid "Insufficient authentication"
 msgstr "Unzureichende Authentifizierung"
@@ -1151,7 +1191,7 @@ msgstr "Ungültiger DAC-Pin angegeben"
 
 #: ports/atmel-samd/common-hal/pwmio/PWMOut.c
 #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c
-#: shared-bindings/pwmio/PWMOut.c
+#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c
 msgid "Invalid PWM frequency"
 msgstr "Ungültige PWM Frequenz"
 
@@ -1245,6 +1285,8 @@ msgstr "Ungültiger Pin für rechten Kanal"
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/SPI.c
 msgid "Invalid pins"
 msgstr "Ungültige Pins"
 
@@ -1368,6 +1410,36 @@ msgstr ""
 msgid "Missing MISO or MOSI Pin"
 msgstr "Fehlender MISO- oder MOSI-Pin"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d reads pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d waits based on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d writes pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_set_pin. Instruction %d sets pin(s)"
+msgstr ""
+
 #: shared-bindings/displayio/Group.c
 msgid "Must be a %q subclass."
 msgstr "Muss eine %q Unterklasse sein."
@@ -1421,14 +1493,14 @@ msgstr "Kein MOSI Pin"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr "Kein RX Pin"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
 msgstr "Kein TX Pin"
 
@@ -1485,6 +1557,10 @@ msgstr "An diesem Pin sind keine Timer mehr verfügbar."
 msgid "No network with that ssid"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "No out in program"
+msgstr ""
+
 #: shared-module/touchio/TouchIn.c
 msgid "No pulldown on pin; 1Mohm recommended"
 msgstr "Kein Pulldown Widerstand am Pin; 1Mohm wird vorgeschlagen"
@@ -1542,6 +1618,10 @@ msgstr "Eine ungerade Parität wird nicht unterstützt"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Nur 8 oder 16 bit mono mit "
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Only IN/OUT of up to 8 supported"
+msgstr ""
+
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr ""
@@ -1618,6 +1698,7 @@ msgid ""
 msgstr "Die PWM-Frequenz ist nicht schreibbar wenn variable_Frequenz = False."
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr "ParallelBus wird noch nicht unterstützt"
@@ -1630,11 +1711,20 @@ msgstr ""
 msgid "Permission denied"
 msgstr "Zugang verweigert"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Pin count must be at least 1"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Pin count too large"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 #: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
+#: ports/raspberrypi/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
 msgid "Pin does not have ADC capabilities"
 msgstr "Pin hat keine ADC Funktionalität"
@@ -1698,10 +1788,34 @@ msgstr ""
 msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does IN without loading ISR"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does OUT without loading OSR"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program must contain at least one 16-bit instruction."
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program size invalid"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program too large"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr "Pull wird nicht verwendet, wenn die Richtung output ist."
 
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
+msgid "RAISE mode is not implemented"
+msgstr ""
+
 #: ports/stm/common-hal/os/__init__.c
 msgid "RNG DeInit Error"
 msgstr "RNG DeInit-Fehler"
@@ -1784,6 +1898,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA oder SCL brauchen pull up"
 
@@ -1805,6 +1920,10 @@ msgstr "SPI-Init-Fehler"
 msgid "SPI Re-initialization error"
 msgstr "SPI-Neuinitialisierungsfehler"
 
+#: ports/raspberrypi/common-hal/busio/SPI.c
+msgid "SPI peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiomixer/Mixer.c
 msgid "Sample rate must be positive"
 msgstr "Abtastrate muss positiv sein"
@@ -1835,6 +1954,14 @@ msgstr "Serializer wird benutzt"
 msgid "Server side context cannot have hostname"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Set pin count must be between 1 and 5"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Side set pin count must be between 1 and 5"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Size not supported"
 msgstr ""
@@ -2013,6 +2140,10 @@ msgstr "UART Init Fehler"
 msgid "UART Re-init error"
 msgstr "UART Re-Init-Fehler"
 
+#: ports/raspberrypi/common-hal/busio/UART.c
+msgid "UART not yet supported"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr "UART-Schreibfehler"
@@ -2121,7 +2252,8 @@ msgstr ""
 "Eingabeaufforderung auf dem anderen Gerät abgelehnt oder ignoriert."
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Baudrate wird nicht unterstützt"
 
@@ -2173,6 +2305,7 @@ msgstr ""
 "WARNUNG: Der Dateiname deines Programms hat zwei Dateityperweiterungen\n"
 
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
 msgstr ""
 
@@ -3604,6 +3737,14 @@ msgstr ""
 msgid "pressing both buttons at start up.\n"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "pull_threshold must be between 1 and 32"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "push_threshold must be between 1 and 32"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr "Warteschlangenüberlauf"
@@ -3810,6 +3951,7 @@ msgstr "time.struct_time() nimmt eine 9-Sequenz an"
 
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "timeout duration exceeded the maximum supported value"
 msgstr "Das Zeitlimit hat den maximal zulässigen Wert überschritten"
 
diff --git a/locale/el.po b/locale/el.po
index 04b63261e..a4aa93f9f 100644
--- a/locale/el.po
+++ b/locale/el.po
@@ -339,6 +339,10 @@ msgstr ""
 msgid "All event channels in use"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "All state machines in use"
+msgstr ""
+
 #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "All sync event channels in use"
 msgstr ""
@@ -387,6 +391,7 @@ msgstr ""
 #: ports/cxd56/common-hal/analogio/AnalogOut.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c
 #: ports/nrf/common-hal/analogio/AnalogOut.c
+#: ports/raspberrypi/common-hal/analogio/AnalogOut.c
 msgid "AnalogOut functionality not supported"
 msgstr ""
 
@@ -586,6 +591,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
 #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c
 #: ports/nrf/common-hal/digitalio/DigitalInOut.c
+#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c
 msgid "Cannot get pull while in output mode"
 msgstr ""
 
@@ -863,7 +869,8 @@ msgstr ""
 msgid "Error: Failure to bind"
 msgstr ""
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
 #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 #: shared-bindings/terminalio/Terminal.c
@@ -1045,6 +1052,10 @@ msgstr ""
 msgid "I2C Init Error"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/busio/I2C.c
+msgid "I2C peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiobusio/I2SOut.c
 msgid "I2SOut not available"
 msgstr ""
@@ -1068,6 +1079,10 @@ msgstr ""
 msgid "Incorrect buffer size"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Init program size invalid"
+msgstr ""
+
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "Initialization failed due to lack of memory"
 msgstr ""
@@ -1080,6 +1095,31 @@ msgstr ""
 msgid "Input/output error"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d jumps on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts in more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts out more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d uses extra pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d waits on input outside of count"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 msgid "Insufficient authentication"
 msgstr ""
@@ -1131,7 +1171,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/pwmio/PWMOut.c
 #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c
-#: shared-bindings/pwmio/PWMOut.c
+#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c
 msgid "Invalid PWM frequency"
 msgstr ""
 
@@ -1225,6 +1265,8 @@ msgstr ""
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/SPI.c
 msgid "Invalid pins"
 msgstr ""
 
@@ -1346,6 +1388,36 @@ msgstr ""
 msgid "Missing MISO or MOSI Pin"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d reads pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d waits based on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d writes pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_set_pin. Instruction %d sets pin(s)"
+msgstr ""
+
 #: shared-bindings/displayio/Group.c
 msgid "Must be a %q subclass."
 msgstr ""
@@ -1399,14 +1471,14 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
 msgstr ""
 
@@ -1463,6 +1535,10 @@ msgstr ""
 msgid "No network with that ssid"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "No out in program"
+msgstr ""
+
 #: shared-module/touchio/TouchIn.c
 msgid "No pulldown on pin; 1Mohm recommended"
 msgstr ""
@@ -1518,6 +1594,10 @@ msgstr ""
 msgid "Only 8 or 16 bit mono with "
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Only IN/OUT of up to 8 supported"
+msgstr ""
+
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr ""
@@ -1590,6 +1670,7 @@ msgid ""
 msgstr ""
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr ""
@@ -1602,11 +1683,20 @@ msgstr ""
 msgid "Permission denied"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Pin count must be at least 1"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Pin count too large"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 #: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
+#: ports/raspberrypi/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
 msgid "Pin does not have ADC capabilities"
 msgstr ""
@@ -1667,10 +1757,34 @@ msgstr ""
 msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does IN without loading ISR"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does OUT without loading OSR"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program must contain at least one 16-bit instruction."
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program size invalid"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program too large"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr ""
 
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
+msgid "RAISE mode is not implemented"
+msgstr ""
+
 #: ports/stm/common-hal/os/__init__.c
 msgid "RNG DeInit Error"
 msgstr ""
@@ -1753,6 +1867,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr ""
 
@@ -1774,6 +1889,10 @@ msgstr ""
 msgid "SPI Re-initialization error"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/busio/SPI.c
+msgid "SPI peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiomixer/Mixer.c
 msgid "Sample rate must be positive"
 msgstr ""
@@ -1804,6 +1923,14 @@ msgstr ""
 msgid "Server side context cannot have hostname"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Set pin count must be between 1 and 5"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Side set pin count must be between 1 and 5"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Size not supported"
 msgstr ""
@@ -1968,6 +2095,10 @@ msgstr ""
 msgid "UART Re-init error"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/busio/UART.c
+msgid "UART not yet supported"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr ""
@@ -2072,7 +2203,8 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr ""
 
@@ -2123,6 +2255,7 @@ msgid "WARNING: Your code filename has two extensions\n"
 msgstr ""
 
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
 msgstr ""
 
@@ -3521,6 +3654,14 @@ msgstr ""
 msgid "pressing both buttons at start up.\n"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "pull_threshold must be between 1 and 32"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "push_threshold must be between 1 and 32"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr ""
@@ -3724,6 +3865,7 @@ msgstr ""
 
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "timeout duration exceeded the maximum supported value"
 msgstr ""
 
diff --git a/locale/es.po b/locale/es.po
index 29b238768..bca7eada0 100644
--- a/locale/es.po
+++ b/locale/es.po
@@ -344,6 +344,10 @@ msgstr "Todos los periféricos UART están siendo usados"
 msgid "All event channels in use"
 msgstr "Todos los canales de eventos estan siendo usados"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "All state machines in use"
+msgstr ""
+
 #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "All sync event channels in use"
 msgstr ""
@@ -394,6 +398,7 @@ msgstr "El pin proporcionado no soporta AnalogIn"
 #: ports/cxd56/common-hal/analogio/AnalogOut.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c
 #: ports/nrf/common-hal/analogio/AnalogOut.c
+#: ports/raspberrypi/common-hal/analogio/AnalogOut.c
 msgid "AnalogOut functionality not supported"
 msgstr "Funcionalidad AnalogOut no soportada"
 
@@ -597,6 +602,7 @@ msgstr "No se puede eliminar valores"
 #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
 #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c
 #: ports/nrf/common-hal/digitalio/DigitalInOut.c
+#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c
 msgid "Cannot get pull while in output mode"
 msgstr "No puede ser pull mientras este en modo de salida"
 
@@ -880,7 +886,8 @@ msgstr "Error en regex"
 msgid "Error: Failure to bind"
 msgstr ""
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
 #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 #: shared-bindings/terminalio/Terminal.c
@@ -1063,6 +1070,10 @@ msgstr "Operación I/O en archivo cerrado"
 msgid "I2C Init Error"
 msgstr "I2C Error de inicio"
 
+#: ports/raspberrypi/common-hal/busio/I2C.c
+msgid "I2C peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiobusio/I2SOut.c
 msgid "I2SOut not available"
 msgstr "I2SOut no disponible"
@@ -1088,6 +1099,10 @@ msgstr ""
 msgid "Incorrect buffer size"
 msgstr "Tamaño incorrecto del buffer"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Init program size invalid"
+msgstr ""
+
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "Initialization failed due to lack of memory"
 msgstr "Inicializacion fallida por falta de memoria"
@@ -1100,6 +1115,31 @@ msgstr "La entrada está durando mucho tiempo"
 msgid "Input/output error"
 msgstr "error Input/output"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d jumps on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts in more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts out more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d uses extra pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d waits on input outside of count"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 msgid "Insufficient authentication"
 msgstr "Autenticación insuficiente"
@@ -1151,7 +1191,7 @@ msgstr "Pin suministrado inválido para DAC"
 
 #: ports/atmel-samd/common-hal/pwmio/PWMOut.c
 #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c
-#: shared-bindings/pwmio/PWMOut.c
+#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c
 msgid "Invalid PWM frequency"
 msgstr "Frecuencia PWM inválida"
 
@@ -1245,6 +1285,8 @@ msgstr "Pin inválido para canal derecho"
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/SPI.c
 msgid "Invalid pins"
 msgstr "pines inválidos"
 
@@ -1366,6 +1408,36 @@ msgstr "Micrófono demora de inicio debe estar en el rango 0.0 a 1.0"
 msgid "Missing MISO or MOSI Pin"
 msgstr "Falta el pin MISO o MOSI"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d reads pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d waits based on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d writes pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_set_pin. Instruction %d sets pin(s)"
+msgstr ""
+
 #: shared-bindings/displayio/Group.c
 msgid "Must be a %q subclass."
 msgstr "Debe de ser una subclase de %q."
@@ -1419,14 +1491,14 @@ msgstr "Sin pin MOSI"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr "Sin pin RX"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
 msgstr "Sin pin TX"
 
@@ -1483,6 +1555,10 @@ msgstr "No hay más temporizadores disponibles en este pin."
 msgid "No network with that ssid"
 msgstr "No hay una red con ese ssid"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "No out in program"
+msgstr ""
+
 #: shared-module/touchio/TouchIn.c
 msgid "No pulldown on pin; 1Mohm recommended"
 msgstr "No hay pulldown en el pin; 1Mohm recomendado"
@@ -1540,6 +1616,10 @@ msgstr "Paridad impar no soportada"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Solo mono de 8 ó 16 bit con "
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Only IN/OUT of up to 8 supported"
+msgstr ""
+
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr "Solo hay capacidad para direcciones IPv4"
@@ -1618,6 +1698,7 @@ msgstr ""
 "construcción."
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr "ParallelBus todavía no soportado"
@@ -1630,11 +1711,20 @@ msgstr ""
 msgid "Permission denied"
 msgstr "Permiso denegado"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Pin count must be at least 1"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Pin count too large"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 #: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
+#: ports/raspberrypi/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
 msgid "Pin does not have ADC capabilities"
 msgstr "Pin no tiene capacidad ADC"
@@ -1702,10 +1792,34 @@ msgstr ""
 msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does IN without loading ISR"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does OUT without loading OSR"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program must contain at least one 16-bit instruction."
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program size invalid"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program too large"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr "Pull no se usa cuando la dirección es output."
 
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
+msgid "RAISE mode is not implemented"
+msgstr ""
+
 #: ports/stm/common-hal/os/__init__.c
 msgid "RNG DeInit Error"
 msgstr "Error de desinicialización de RNG"
@@ -1788,6 +1902,7 @@ msgstr "Sin capacidad para formato CSD para tarjeta SD"
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA o SCL necesitan una pull up"
 
@@ -1809,6 +1924,10 @@ msgstr "Error de inicio de SPI"
 msgid "SPI Re-initialization error"
 msgstr "Error de reinicialización de SPI"
 
+#: ports/raspberrypi/common-hal/busio/SPI.c
+msgid "SPI peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiomixer/Mixer.c
 msgid "Sample rate must be positive"
 msgstr "Sample rate debe ser positivo"
@@ -1839,6 +1958,14 @@ msgstr "Serializer está siendo utilizado"
 msgid "Server side context cannot have hostname"
 msgstr "El contexto del lado del servidor no puede tener un hostname"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Set pin count must be between 1 and 5"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Side set pin count must be between 1 and 5"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Size not supported"
 msgstr "Sin capacidades para el tamaño"
@@ -2017,6 +2144,10 @@ msgstr "Error de inicialización de UART"
 msgid "UART Re-init error"
 msgstr "Error de reinicialización de UART"
 
+#: ports/raspberrypi/common-hal/busio/UART.c
+msgid "UART not yet supported"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr "Error de escritura UART"
@@ -2123,7 +2254,8 @@ msgstr ""
 "dispositivo fue denegada o ignorada."
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Baudrate no soportado"
 
@@ -2174,6 +2306,7 @@ msgid "WARNING: Your code filename has two extensions\n"
 msgstr "ADVERTENCIA: El nombre de archivo de tu código tiene dos extensiones\n"
 
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
 msgstr ""
 "WatchDogTimer no se puede desinicializar luego de definirse en modo RESET"
@@ -3594,6 +3727,14 @@ msgstr "presionando botón de arranque al inicio.\n"
 msgid "pressing both buttons at start up.\n"
 msgstr "presionando ambos botones al inicio.\n"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "pull_threshold must be between 1 and 32"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "push_threshold must be between 1 and 32"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr "desbordamiento de cola(queue)"
@@ -3799,6 +3940,7 @@ msgstr "time.struct_time() toma un sequencio 9"
 
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "timeout duration exceeded the maximum supported value"
 msgstr ""
 "la duración de tiempo de espera ha excedido la capacidad máxima del valor"
diff --git a/locale/fil.po b/locale/fil.po
index 2fdcd2f04..97e99cfd5 100644
--- a/locale/fil.po
+++ b/locale/fil.po
@@ -342,6 +342,10 @@ msgstr "Lahat ng I2C peripherals ginagamit"
 msgid "All event channels in use"
 msgstr "Lahat ng event channels ginagamit"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "All state machines in use"
+msgstr ""
+
 #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "All sync event channels in use"
 msgstr "Lahat ng sync event channels ay ginagamit"
@@ -390,6 +394,7 @@ msgstr ""
 #: ports/cxd56/common-hal/analogio/AnalogOut.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c
 #: ports/nrf/common-hal/analogio/AnalogOut.c
+#: ports/raspberrypi/common-hal/analogio/AnalogOut.c
 msgid "AnalogOut functionality not supported"
 msgstr "Hindi supportado ang AnalogOut"
 
@@ -592,6 +597,7 @@ msgstr "Hindi mabura ang values"
 #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
 #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c
 #: ports/nrf/common-hal/digitalio/DigitalInOut.c
+#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c
 msgid "Cannot get pull while in output mode"
 msgstr "Hindi makakakuha ng pull habang nasa output mode"
 
@@ -874,7 +880,8 @@ msgstr "May pagkakamali sa REGEX"
 msgid "Error: Failure to bind"
 msgstr ""
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
 #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 #: shared-bindings/terminalio/Terminal.c
@@ -1058,6 +1065,10 @@ msgstr "I/O operasyon sa saradong file"
 msgid "I2C Init Error"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/busio/I2C.c
+msgid "I2C peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiobusio/I2SOut.c
 msgid "I2SOut not available"
 msgstr ""
@@ -1083,6 +1094,10 @@ msgstr ""
 msgid "Incorrect buffer size"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Init program size invalid"
+msgstr ""
+
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "Initialization failed due to lack of memory"
 msgstr ""
@@ -1095,6 +1110,31 @@ msgstr ""
 msgid "Input/output error"
 msgstr "May mali sa Input/Output"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d jumps on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts in more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts out more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d uses extra pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d waits on input outside of count"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 msgid "Insufficient authentication"
 msgstr ""
@@ -1146,7 +1186,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/pwmio/PWMOut.c
 #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c
-#: shared-bindings/pwmio/PWMOut.c
+#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c
 msgid "Invalid PWM frequency"
 msgstr "Mali ang PWM frequency"
 
@@ -1240,6 +1280,8 @@ msgstr "Mali ang pin para sa kanang channel"
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/SPI.c
 msgid "Invalid pins"
 msgstr "Mali ang pins"
 
@@ -1361,6 +1403,36 @@ msgstr "Ang delay ng startup ng mikropono ay dapat na nasa 0.0 hanggang 1.0"
 msgid "Missing MISO or MOSI Pin"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d reads pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d waits based on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d writes pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_set_pin. Instruction %d sets pin(s)"
+msgstr ""
+
 #: shared-bindings/displayio/Group.c
 msgid "Must be a %q subclass."
 msgstr ""
@@ -1414,14 +1486,14 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr "Walang RX pin"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
 msgstr "Walang TX pin"
 
@@ -1478,6 +1550,10 @@ msgstr ""
 msgid "No network with that ssid"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "No out in program"
+msgstr ""
+
 #: shared-module/touchio/TouchIn.c
 msgid "No pulldown on pin; 1Mohm recommended"
 msgstr ""
@@ -1536,6 +1612,10 @@ msgstr "Odd na parity ay hindi supportado"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Tanging 8 o 16 na bit mono na may "
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Only IN/OUT of up to 8 supported"
+msgstr ""
+
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr ""
@@ -1609,6 +1689,7 @@ msgstr ""
 "PWM frequency hindi writable kapag variable_frequency ay False sa pag buo."
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr ""
@@ -1621,11 +1702,20 @@ msgstr ""
 msgid "Permission denied"
 msgstr "Walang pahintulot"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Pin count must be at least 1"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Pin count too large"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 #: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
+#: ports/raspberrypi/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
 msgid "Pin does not have ADC capabilities"
 msgstr "Ang pin ay walang kakayahan sa ADC"
@@ -1686,10 +1776,34 @@ msgstr ""
 msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does IN without loading ISR"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does OUT without loading OSR"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program must contain at least one 16-bit instruction."
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program size invalid"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program too large"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr "Pull hindi ginagamit kapag ang direksyon ay output."
 
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
+msgid "RAISE mode is not implemented"
+msgstr ""
+
 #: ports/stm/common-hal/os/__init__.c
 msgid "RNG DeInit Error"
 msgstr ""
@@ -1773,6 +1887,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "Kailangan ng pull up resistors ang SDA o SCL"
 
@@ -1794,6 +1909,10 @@ msgstr ""
 msgid "SPI Re-initialization error"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/busio/SPI.c
+msgid "SPI peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiomixer/Mixer.c
 msgid "Sample rate must be positive"
 msgstr "Sample rate ay dapat positibo"
@@ -1824,6 +1943,14 @@ msgstr "Serializer ginagamit"
 msgid "Server side context cannot have hostname"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Set pin count must be between 1 and 5"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Side set pin count must be between 1 and 5"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Size not supported"
 msgstr ""
@@ -1988,6 +2115,10 @@ msgstr ""
 msgid "UART Re-init error"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/busio/UART.c
+msgid "UART not yet supported"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr ""
@@ -2093,7 +2224,8 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Hindi supportadong baudrate"
 
@@ -2147,6 +2279,7 @@ msgid "WARNING: Your code filename has two extensions\n"
 msgstr "BABALA: Ang pangalan ng file ay may dalawang extension\n"
 
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
 msgstr ""
 
@@ -3570,6 +3703,14 @@ msgstr ""
 msgid "pressing both buttons at start up.\n"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "pull_threshold must be between 1 and 32"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "push_threshold must be between 1 and 32"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr "puno na ang pila (overflow)"
@@ -3776,6 +3917,7 @@ msgstr "time.struct_time() kumukuha ng 9-sequence"
 
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "timeout duration exceeded the maximum supported value"
 msgstr ""
 
diff --git a/locale/fr.po b/locale/fr.po
index 20c8ea743..ac78a6f7d 100644
--- a/locale/fr.po
+++ b/locale/fr.po
@@ -350,6 +350,10 @@ msgstr "Tous les périphériques UART sont utilisés"
 msgid "All event channels in use"
 msgstr "Tous les canaux d'événements sont utilisés"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "All state machines in use"
+msgstr ""
+
 #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "All sync event channels in use"
 msgstr "Tous les canaux d'événements sync (sync event channels) sont utilisés"
@@ -398,6 +402,7 @@ msgstr "'AnalogOut' n'est pas supporté sur la broche indiquée"
 #: ports/cxd56/common-hal/analogio/AnalogOut.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c
 #: ports/nrf/common-hal/analogio/AnalogOut.c
+#: ports/raspberrypi/common-hal/analogio/AnalogOut.c
 msgid "AnalogOut functionality not supported"
 msgstr "Fonctionnalité AnalogOut non supportée"
 
@@ -608,6 +613,7 @@ msgstr "Impossible de supprimer les valeurs"
 #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
 #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c
 #: ports/nrf/common-hal/digitalio/DigitalInOut.c
+#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c
 msgid "Cannot get pull while in output mode"
 msgstr "Ne peut être tiré ('pull') en mode sortie ('output')"
 
@@ -895,7 +901,8 @@ msgstr "Erreur dans l'expression régulière"
 msgid "Error: Failure to bind"
 msgstr "Erreur : Impossible de lier"
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
 #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 #: shared-bindings/terminalio/Terminal.c
@@ -1080,6 +1087,10 @@ msgstr "Opération d'E/S sur un fichier fermé"
 msgid "I2C Init Error"
 msgstr "Erreur d'initialisation I2C"
 
+#: ports/raspberrypi/common-hal/busio/I2C.c
+msgid "I2C peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiobusio/I2SOut.c
 msgid "I2SOut not available"
 msgstr "I2SOut n'est pas disponible"
@@ -1105,6 +1116,10 @@ msgstr ""
 msgid "Incorrect buffer size"
 msgstr "Taille de tampon incorrecte"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Init program size invalid"
+msgstr ""
+
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "Initialization failed due to lack of memory"
 msgstr "Échec d'initialisation par manque de mémoire"
@@ -1117,6 +1132,31 @@ msgstr "L'entrée prend trop de temps"
 msgid "Input/output error"
 msgstr "Erreur d'entrée/sortie"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d jumps on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts in more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts out more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d uses extra pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d waits on input outside of count"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 msgid "Insufficient authentication"
 msgstr "Authentification insuffisante"
@@ -1168,7 +1208,7 @@ msgstr "Broche DAC non valide fournie"
 
 #: ports/atmel-samd/common-hal/pwmio/PWMOut.c
 #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c
-#: shared-bindings/pwmio/PWMOut.c
+#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c
 msgid "Invalid PWM frequency"
 msgstr "Fréquence de PWM invalide"
 
@@ -1262,6 +1302,8 @@ msgstr "Broche invalide pour le canal droit"
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/SPI.c
 msgid "Invalid pins"
 msgstr "Broches invalides"
 
@@ -1383,6 +1425,36 @@ msgstr "Le délais au démarrage du micro doit être entre 0.0 et 1.0"
 msgid "Missing MISO or MOSI Pin"
 msgstr "Broche MISO ou MOSI manquante"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d reads pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d waits based on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d writes pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_set_pin. Instruction %d sets pin(s)"
+msgstr ""
+
 #: shared-bindings/displayio/Group.c
 msgid "Must be a %q subclass."
 msgstr "Doit être une sous-classe de %q."
@@ -1436,14 +1508,14 @@ msgstr "Pas de broche MOSI"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr "Pas de broche RX"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
 msgstr "Pas de broche TX"
 
@@ -1500,6 +1572,10 @@ msgstr "Plus de minuteurs disponibles sur cette broche."
 msgid "No network with that ssid"
 msgstr "Aucun réseau avec ce ssid"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "No out in program"
+msgstr ""
+
 #: shared-module/touchio/TouchIn.c
 msgid "No pulldown on pin; 1Mohm recommended"
 msgstr "Pas de pulldown sur la broche ; 1Mohm recommandé"
@@ -1557,6 +1633,10 @@ msgstr "Parité impaire non supportée"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Uniquement 8 ou 16 bit mono avec "
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Only IN/OUT of up to 8 supported"
+msgstr ""
+
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr "Seulement les adresses IPv4 sont supportées"
@@ -1637,6 +1717,7 @@ msgstr ""
 "à la construction."
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr "ParallelBus pas encore supporté"
@@ -1649,11 +1730,20 @@ msgstr "Périphérique en utilisation"
 msgid "Permission denied"
 msgstr "Permission refusée"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Pin count must be at least 1"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Pin count too large"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 #: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
+#: ports/raspberrypi/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
 msgid "Pin does not have ADC capabilities"
 msgstr "La broche 'pin' ne supporte pas les capacitées ADC"
@@ -1724,10 +1814,34 @@ msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n"
 msgstr ""
 "Feinte de someil profond jusqu'à l'alarme, CTRL-C ou écriture au fichier.\n"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does IN without loading ISR"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does OUT without loading OSR"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program must contain at least one 16-bit instruction."
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program size invalid"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program too large"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr "Le tirage 'pull' n'est pas utilisé quand la direction est 'output'."
 
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
+msgid "RAISE mode is not implemented"
+msgstr ""
+
 #: ports/stm/common-hal/os/__init__.c
 msgid "RNG DeInit Error"
 msgstr "Erreur de désinitiation du RNG (RNG DeInit)"
@@ -1810,6 +1924,7 @@ msgstr "Le format de carte SD CSD n'est pas supporté"
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA ou SCL a besoin d'une résistance de tirage ('pull up')"
 
@@ -1831,6 +1946,10 @@ msgstr "Erreur d'initialisation SPI"
 msgid "SPI Re-initialization error"
 msgstr "Erreur de réinitialisation SPI"
 
+#: ports/raspberrypi/common-hal/busio/SPI.c
+msgid "SPI peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiomixer/Mixer.c
 msgid "Sample rate must be positive"
 msgstr "Le taux d'échantillonage doit être positif"
@@ -1861,6 +1980,14 @@ msgstr "Sérialiseur en cours d'utilisation"
 msgid "Server side context cannot have hostname"
 msgstr "Un contexte niveau serveur ne peut avoir de hostname"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Set pin count must be between 1 and 5"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Side set pin count must be between 1 and 5"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Size not supported"
 msgstr "Taille n'est pas supportée"
@@ -2037,6 +2164,10 @@ msgstr "Erreur d'initialisation UART"
 msgid "UART Re-init error"
 msgstr "Erreur de réinitialisation UART"
 
+#: ports/raspberrypi/common-hal/busio/UART.c
+msgid "UART not yet supported"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr "Erreur d'écriture UART"
@@ -2147,7 +2278,8 @@ msgstr ""
 "appareil ait été refusée ou ignorée."
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Débit en bauds non supporté"
 
@@ -2199,6 +2331,7 @@ msgid "WARNING: Your code filename has two extensions\n"
 msgstr "ATTENTION : le nom de fichier de votre code a deux extensions\n"
 
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
 msgstr ""
 "WatchDogTimer ne peut pas être désinitialisé une fois que le mode est réglé "
@@ -3631,6 +3764,14 @@ msgstr "bouton boot appuyé lors du démarrage.\n"
 msgid "pressing both buttons at start up.\n"
 msgstr "les deux boutons appuyés lors du démarrage.\n"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "pull_threshold must be between 1 and 32"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "push_threshold must be between 1 and 32"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr "dépassement de file"
@@ -3837,6 +3978,7 @@ msgstr "time.struct_time() prend une séquence de longueur 9"
 
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "timeout duration exceeded the maximum supported value"
 msgstr "le délai d'expiration a dépassé la valeur maximale prise en charge"
 
diff --git a/locale/hi.po b/locale/hi.po
index 88c82d4b8..e713d6b86 100644
--- a/locale/hi.po
+++ b/locale/hi.po
@@ -339,6 +339,10 @@ msgstr ""
 msgid "All event channels in use"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "All state machines in use"
+msgstr ""
+
 #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "All sync event channels in use"
 msgstr ""
@@ -387,6 +391,7 @@ msgstr ""
 #: ports/cxd56/common-hal/analogio/AnalogOut.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c
 #: ports/nrf/common-hal/analogio/AnalogOut.c
+#: ports/raspberrypi/common-hal/analogio/AnalogOut.c
 msgid "AnalogOut functionality not supported"
 msgstr ""
 
@@ -586,6 +591,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
 #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c
 #: ports/nrf/common-hal/digitalio/DigitalInOut.c
+#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c
 msgid "Cannot get pull while in output mode"
 msgstr ""
 
@@ -863,7 +869,8 @@ msgstr ""
 msgid "Error: Failure to bind"
 msgstr ""
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
 #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 #: shared-bindings/terminalio/Terminal.c
@@ -1045,6 +1052,10 @@ msgstr ""
 msgid "I2C Init Error"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/busio/I2C.c
+msgid "I2C peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiobusio/I2SOut.c
 msgid "I2SOut not available"
 msgstr ""
@@ -1068,6 +1079,10 @@ msgstr ""
 msgid "Incorrect buffer size"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Init program size invalid"
+msgstr ""
+
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "Initialization failed due to lack of memory"
 msgstr ""
@@ -1080,6 +1095,31 @@ msgstr ""
 msgid "Input/output error"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d jumps on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts in more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts out more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d uses extra pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d waits on input outside of count"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 msgid "Insufficient authentication"
 msgstr ""
@@ -1131,7 +1171,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/pwmio/PWMOut.c
 #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c
-#: shared-bindings/pwmio/PWMOut.c
+#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c
 msgid "Invalid PWM frequency"
 msgstr ""
 
@@ -1225,6 +1265,8 @@ msgstr ""
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/SPI.c
 msgid "Invalid pins"
 msgstr ""
 
@@ -1346,6 +1388,36 @@ msgstr ""
 msgid "Missing MISO or MOSI Pin"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d reads pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d waits based on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d writes pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_set_pin. Instruction %d sets pin(s)"
+msgstr ""
+
 #: shared-bindings/displayio/Group.c
 msgid "Must be a %q subclass."
 msgstr ""
@@ -1399,14 +1471,14 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
 msgstr ""
 
@@ -1463,6 +1535,10 @@ msgstr ""
 msgid "No network with that ssid"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "No out in program"
+msgstr ""
+
 #: shared-module/touchio/TouchIn.c
 msgid "No pulldown on pin; 1Mohm recommended"
 msgstr ""
@@ -1518,6 +1594,10 @@ msgstr ""
 msgid "Only 8 or 16 bit mono with "
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Only IN/OUT of up to 8 supported"
+msgstr ""
+
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr ""
@@ -1590,6 +1670,7 @@ msgid ""
 msgstr ""
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr ""
@@ -1602,11 +1683,20 @@ msgstr ""
 msgid "Permission denied"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Pin count must be at least 1"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Pin count too large"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 #: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
+#: ports/raspberrypi/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
 msgid "Pin does not have ADC capabilities"
 msgstr ""
@@ -1667,10 +1757,34 @@ msgstr ""
 msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does IN without loading ISR"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does OUT without loading OSR"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program must contain at least one 16-bit instruction."
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program size invalid"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program too large"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr ""
 
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
+msgid "RAISE mode is not implemented"
+msgstr ""
+
 #: ports/stm/common-hal/os/__init__.c
 msgid "RNG DeInit Error"
 msgstr ""
@@ -1753,6 +1867,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr ""
 
@@ -1774,6 +1889,10 @@ msgstr ""
 msgid "SPI Re-initialization error"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/busio/SPI.c
+msgid "SPI peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiomixer/Mixer.c
 msgid "Sample rate must be positive"
 msgstr ""
@@ -1804,6 +1923,14 @@ msgstr ""
 msgid "Server side context cannot have hostname"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Set pin count must be between 1 and 5"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Side set pin count must be between 1 and 5"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Size not supported"
 msgstr ""
@@ -1968,6 +2095,10 @@ msgstr ""
 msgid "UART Re-init error"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/busio/UART.c
+msgid "UART not yet supported"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr ""
@@ -2072,7 +2203,8 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr ""
 
@@ -2123,6 +2255,7 @@ msgid "WARNING: Your code filename has two extensions\n"
 msgstr ""
 
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
 msgstr ""
 
@@ -3521,6 +3654,14 @@ msgstr ""
 msgid "pressing both buttons at start up.\n"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "pull_threshold must be between 1 and 32"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "push_threshold must be between 1 and 32"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr ""
@@ -3724,6 +3865,7 @@ msgstr ""
 
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "timeout duration exceeded the maximum supported value"
 msgstr ""
 
diff --git a/locale/it_IT.po b/locale/it_IT.po
index b380b2fae..61e492a7a 100644
--- a/locale/it_IT.po
+++ b/locale/it_IT.po
@@ -341,6 +341,10 @@ msgstr "Tutte le periferiche I2C sono in uso"
 msgid "All event channels in use"
 msgstr "Tutti i canali eventi utilizati"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "All state machines in use"
+msgstr ""
+
 #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "All sync event channels in use"
 msgstr "Tutti i canali di eventi sincronizzati in uso"
@@ -389,6 +393,7 @@ msgstr ""
 #: ports/cxd56/common-hal/analogio/AnalogOut.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c
 #: ports/nrf/common-hal/analogio/AnalogOut.c
+#: ports/raspberrypi/common-hal/analogio/AnalogOut.c
 msgid "AnalogOut functionality not supported"
 msgstr "funzionalità AnalogOut non supportata"
 
@@ -592,6 +597,7 @@ msgstr "Impossibile cancellare valori"
 #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
 #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c
 #: ports/nrf/common-hal/digitalio/DigitalInOut.c
+#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c
 msgid "Cannot get pull while in output mode"
 msgstr "non si può tirare quando nella modalita output"
 
@@ -874,7 +880,8 @@ msgstr "Errore nella regex"
 msgid "Error: Failure to bind"
 msgstr ""
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
 #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 #: shared-bindings/terminalio/Terminal.c
@@ -1058,6 +1065,10 @@ msgstr "operazione I/O su file chiuso"
 msgid "I2C Init Error"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/busio/I2C.c
+msgid "I2C peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiobusio/I2SOut.c
 msgid "I2SOut not available"
 msgstr ""
@@ -1083,6 +1094,10 @@ msgstr ""
 msgid "Incorrect buffer size"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Init program size invalid"
+msgstr ""
+
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "Initialization failed due to lack of memory"
 msgstr ""
@@ -1095,6 +1110,31 @@ msgstr ""
 msgid "Input/output error"
 msgstr "Errore input/output"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d jumps on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts in more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts out more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d uses extra pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d waits on input outside of count"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 msgid "Insufficient authentication"
 msgstr ""
@@ -1146,7 +1186,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/pwmio/PWMOut.c
 #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c
-#: shared-bindings/pwmio/PWMOut.c
+#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c
 msgid "Invalid PWM frequency"
 msgstr "Frequenza PWM non valida"
 
@@ -1242,6 +1282,8 @@ msgstr "Pin non valido per il canale destro"
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/SPI.c
 msgid "Invalid pins"
 msgstr "Pin non validi"
 
@@ -1365,6 +1407,36 @@ msgstr ""
 msgid "Missing MISO or MOSI Pin"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d reads pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d waits based on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d writes pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_set_pin. Instruction %d sets pin(s)"
+msgstr ""
+
 #: shared-bindings/displayio/Group.c
 msgid "Must be a %q subclass."
 msgstr ""
@@ -1418,14 +1490,14 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr "Nessun pin RX"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
 msgstr "Nessun pin TX"
 
@@ -1482,6 +1554,10 @@ msgstr ""
 msgid "No network with that ssid"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "No out in program"
+msgstr ""
+
 #: shared-module/touchio/TouchIn.c
 msgid "No pulldown on pin; 1Mohm recommended"
 msgstr ""
@@ -1541,6 +1617,10 @@ msgstr "operazione I2C non supportata"
 msgid "Only 8 or 16 bit mono with "
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Only IN/OUT of up to 8 supported"
+msgstr ""
+
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr ""
@@ -1618,6 +1698,7 @@ msgstr ""
 "impostato nel costruttore a False."
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr ""
@@ -1630,11 +1711,20 @@ msgstr ""
 msgid "Permission denied"
 msgstr "Permesso negato"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Pin count must be at least 1"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Pin count too large"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 #: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
+#: ports/raspberrypi/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
 msgid "Pin does not have ADC capabilities"
 msgstr "Il pin non ha capacità di ADC"
@@ -1696,10 +1786,34 @@ msgstr ""
 msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does IN without loading ISR"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does OUT without loading OSR"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program must contain at least one 16-bit instruction."
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program size invalid"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program too large"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr ""
 
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
+msgid "RAISE mode is not implemented"
+msgstr ""
+
 #: ports/stm/common-hal/os/__init__.c
 msgid "RNG DeInit Error"
 msgstr ""
@@ -1783,6 +1897,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA o SCL necessitano un pull-up"
 
@@ -1804,6 +1919,10 @@ msgstr ""
 msgid "SPI Re-initialization error"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/busio/SPI.c
+msgid "SPI peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiomixer/Mixer.c
 #, fuzzy
 msgid "Sample rate must be positive"
@@ -1836,6 +1955,14 @@ msgstr "Serializer in uso"
 msgid "Server side context cannot have hostname"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Set pin count must be between 1 and 5"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Side set pin count must be between 1 and 5"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Size not supported"
 msgstr ""
@@ -2000,6 +2127,10 @@ msgstr ""
 msgid "UART Re-init error"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/busio/UART.c
+msgid "UART not yet supported"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr ""
@@ -2105,7 +2236,8 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "baudrate non supportato"
 
@@ -2157,6 +2289,7 @@ msgid "WARNING: Your code filename has two extensions\n"
 msgstr "ATTENZIONE: Il nome del sorgente ha due estensioni\n"
 
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
 msgstr ""
 
@@ -3578,6 +3711,14 @@ msgstr ""
 msgid "pressing both buttons at start up.\n"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "pull_threshold must be between 1 and 32"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "push_threshold must be between 1 and 32"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr "overflow della coda"
@@ -3784,6 +3925,7 @@ msgstr ""
 
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "timeout duration exceeded the maximum supported value"
 msgstr ""
 
diff --git a/locale/ja.po b/locale/ja.po
index bae5704a1..a7d4835bc 100644
--- a/locale/ja.po
+++ b/locale/ja.po
@@ -344,6 +344,10 @@ msgstr "全てのUART周辺機器が使用中"
 msgid "All event channels in use"
 msgstr "全てのイベントチャネルが使用中"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "All state machines in use"
+msgstr ""
+
 #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "All sync event channels in use"
 msgstr "全ての同期イベントチャネルが使用中"
@@ -392,6 +396,7 @@ msgstr "指定のピンはAnalogInに対応していません"
 #: ports/cxd56/common-hal/analogio/AnalogOut.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c
 #: ports/nrf/common-hal/analogio/AnalogOut.c
+#: ports/raspberrypi/common-hal/analogio/AnalogOut.c
 msgid "AnalogOut functionality not supported"
 msgstr "AnalogOut機能に対応していません"
 
@@ -595,6 +600,7 @@ msgstr "値を削除できません"
 #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
 #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c
 #: ports/nrf/common-hal/digitalio/DigitalInOut.c
+#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c
 msgid "Cannot get pull while in output mode"
 msgstr "出力モード時はpullを取得できません"
 
@@ -874,7 +880,8 @@ msgstr "正規表現にエラーがあります"
 msgid "Error: Failure to bind"
 msgstr ""
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
 #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 #: shared-bindings/terminalio/Terminal.c
@@ -1056,6 +1063,10 @@ msgstr "閉じられたファイルへのI/O操作"
 msgid "I2C Init Error"
 msgstr "I2C初期化エラー"
 
+#: ports/raspberrypi/common-hal/busio/I2C.c
+msgid "I2C peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiobusio/I2SOut.c
 msgid "I2SOut not available"
 msgstr "I2SOutが利用できません"
@@ -1081,6 +1092,10 @@ msgstr ""
 msgid "Incorrect buffer size"
 msgstr "バッファサイズが正しくありません"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Init program size invalid"
+msgstr ""
+
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "Initialization failed due to lack of memory"
 msgstr ""
@@ -1093,6 +1108,31 @@ msgstr ""
 msgid "Input/output error"
 msgstr "入力/出力エラー"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d jumps on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts in more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts out more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d uses extra pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d waits on input outside of count"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 msgid "Insufficient authentication"
 msgstr "認証が不十分"
@@ -1144,7 +1184,7 @@ msgstr "不正なDACピンが与えられました"
 
 #: ports/atmel-samd/common-hal/pwmio/PWMOut.c
 #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c
-#: shared-bindings/pwmio/PWMOut.c
+#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c
 msgid "Invalid PWM frequency"
 msgstr "無効なPWM周波数"
 
@@ -1238,6 +1278,8 @@ msgstr "右チャネルのピンが不正"
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/SPI.c
 msgid "Invalid pins"
 msgstr "ピンが不正"
 
@@ -1359,6 +1401,36 @@ msgstr "マイクのスタートアップディレイは 0.0 から 1.0 の間�
 msgid "Missing MISO or MOSI Pin"
 msgstr "MISOまたはMOSIピンがありません"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d reads pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d waits based on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d writes pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_set_pin. Instruction %d sets pin(s)"
+msgstr ""
+
 #: shared-bindings/displayio/Group.c
 msgid "Must be a %q subclass."
 msgstr "%q のサブクラスでなければなりません"
@@ -1412,14 +1484,14 @@ msgstr "MOSIピンがありません"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr "RXピンがありません"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
 msgstr "TXピンがありません"
 
@@ -1476,6 +1548,10 @@ msgstr "このピンには使えるタイマーがもうありません"
 msgid "No network with that ssid"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "No out in program"
+msgstr ""
+
 #: shared-module/touchio/TouchIn.c
 msgid "No pulldown on pin; 1Mohm recommended"
 msgstr "ピンにプルダウンがありません。1Mオーム推奨"
@@ -1533,6 +1609,10 @@ msgstr "奇数パリティには対応していません"
 msgid "Only 8 or 16 bit mono with "
 msgstr "8または16ビットの "
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Only IN/OUT of up to 8 supported"
+msgstr ""
+
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr ""
@@ -1606,6 +1686,7 @@ msgid ""
 msgstr "PWM周波数は生成時のvariable_frequencyがFalseのとき書き換え不可"
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr "ParallelBusにはまだ対応していません"
@@ -1618,11 +1699,20 @@ msgstr ""
 msgid "Permission denied"
 msgstr "パーミッション拒否"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Pin count must be at least 1"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Pin count too large"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 #: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
+#: ports/raspberrypi/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
 msgid "Pin does not have ADC capabilities"
 msgstr "ピンにADCの能力がありません"
@@ -1683,10 +1773,34 @@ msgstr ""
 msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does IN without loading ISR"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does OUT without loading OSR"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program must contain at least one 16-bit instruction."
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program size invalid"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program too large"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr "方向がoutputのときpullは使われません"
 
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
+msgid "RAISE mode is not implemented"
+msgstr ""
+
 #: ports/stm/common-hal/os/__init__.c
 msgid "RNG DeInit Error"
 msgstr "RNG解体エラー"
@@ -1769,6 +1883,7 @@ msgstr "SDカードのCSDフォーマットは非対応"
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDAとSCLにプルアップが必要"
 
@@ -1790,6 +1905,10 @@ msgstr "SPI初期化エラー"
 msgid "SPI Re-initialization error"
 msgstr "SPI再初期化エラー"
 
+#: ports/raspberrypi/common-hal/busio/SPI.c
+msgid "SPI peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiomixer/Mixer.c
 msgid "Sample rate must be positive"
 msgstr "サンプルレートは正数でなければなりません"
@@ -1820,6 +1939,14 @@ msgstr "シリアライザは使用中"
 msgid "Server side context cannot have hostname"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Set pin count must be between 1 and 5"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Side set pin count must be between 1 and 5"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Size not supported"
 msgstr "サイズは対応していません"
@@ -1990,6 +2117,10 @@ msgstr "UARTの初期化エラー"
 msgid "UART Re-init error"
 msgstr "UARTの再初期化エラー"
 
+#: ports/raspberrypi/common-hal/busio/UART.c
+msgid "UART not yet supported"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr "UART書き込みエラー"
@@ -2095,7 +2226,8 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "非対応のbaudrate"
 
@@ -2146,6 +2278,7 @@ msgid "WARNING: Your code filename has two extensions\n"
 msgstr ""
 
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
 msgstr ""
 
@@ -3551,6 +3684,14 @@ msgstr ""
 msgid "pressing both buttons at start up.\n"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "pull_threshold must be between 1 and 32"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "push_threshold must be between 1 and 32"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr "キューがオーバーフローしました"
@@ -3755,6 +3896,7 @@ msgstr "time.struct_time()は9要素のシーケンスを受け取ります"
 
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "timeout duration exceeded the maximum supported value"
 msgstr "タイムアウト長は対応する最大値を超えています"
 
diff --git a/locale/ko.po b/locale/ko.po
index c284971af..762d876ee 100644
--- a/locale/ko.po
+++ b/locale/ko.po
@@ -340,6 +340,10 @@ msgstr "사용중인 모든 UART주변 기기"
 msgid "All event channels in use"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "All state machines in use"
+msgstr ""
+
 #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "All sync event channels in use"
 msgstr ""
@@ -388,6 +392,7 @@ msgstr ""
 #: ports/cxd56/common-hal/analogio/AnalogOut.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c
 #: ports/nrf/common-hal/analogio/AnalogOut.c
+#: ports/raspberrypi/common-hal/analogio/AnalogOut.c
 msgid "AnalogOut functionality not supported"
 msgstr ""
 
@@ -589,6 +594,7 @@ msgstr "값을 삭제할 수 없습니다"
 #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
 #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c
 #: ports/nrf/common-hal/digitalio/DigitalInOut.c
+#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c
 msgid "Cannot get pull while in output mode"
 msgstr ""
 
@@ -866,7 +872,8 @@ msgstr "Regex에 오류가 있습니다."
 msgid "Error: Failure to bind"
 msgstr ""
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
 #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 #: shared-bindings/terminalio/Terminal.c
@@ -1048,6 +1055,10 @@ msgstr ""
 msgid "I2C Init Error"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/busio/I2C.c
+msgid "I2C peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiobusio/I2SOut.c
 msgid "I2SOut not available"
 msgstr ""
@@ -1071,6 +1082,10 @@ msgstr ""
 msgid "Incorrect buffer size"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Init program size invalid"
+msgstr ""
+
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "Initialization failed due to lack of memory"
 msgstr ""
@@ -1083,6 +1098,31 @@ msgstr ""
 msgid "Input/output error"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d jumps on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts in more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts out more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d uses extra pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d waits on input outside of count"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 msgid "Insufficient authentication"
 msgstr ""
@@ -1134,7 +1174,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/pwmio/PWMOut.c
 #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c
-#: shared-bindings/pwmio/PWMOut.c
+#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c
 msgid "Invalid PWM frequency"
 msgstr ""
 
@@ -1228,6 +1268,8 @@ msgstr "오른쪽 채널 핀이 잘못되었습니다"
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/SPI.c
 msgid "Invalid pins"
 msgstr "핀이 유효하지 않습니다"
 
@@ -1349,6 +1391,36 @@ msgstr ""
 msgid "Missing MISO or MOSI Pin"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d reads pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d waits based on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d writes pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_set_pin. Instruction %d sets pin(s)"
+msgstr ""
+
 #: shared-bindings/displayio/Group.c
 msgid "Must be a %q subclass."
 msgstr ""
@@ -1402,14 +1474,14 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
 msgstr ""
 
@@ -1466,6 +1538,10 @@ msgstr ""
 msgid "No network with that ssid"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "No out in program"
+msgstr ""
+
 #: shared-module/touchio/TouchIn.c
 msgid "No pulldown on pin; 1Mohm recommended"
 msgstr ""
@@ -1521,6 +1597,10 @@ msgstr ""
 msgid "Only 8 or 16 bit mono with "
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Only IN/OUT of up to 8 supported"
+msgstr ""
+
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr ""
@@ -1593,6 +1673,7 @@ msgid ""
 msgstr ""
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr ""
@@ -1605,11 +1686,20 @@ msgstr ""
 msgid "Permission denied"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Pin count must be at least 1"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Pin count too large"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 #: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
+#: ports/raspberrypi/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
 msgid "Pin does not have ADC capabilities"
 msgstr ""
@@ -1670,10 +1760,34 @@ msgstr ""
 msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does IN without loading ISR"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does OUT without loading OSR"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program must contain at least one 16-bit instruction."
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program size invalid"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program too large"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr ""
 
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
+msgid "RAISE mode is not implemented"
+msgstr ""
+
 #: ports/stm/common-hal/os/__init__.c
 msgid "RNG DeInit Error"
 msgstr ""
@@ -1756,6 +1870,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr ""
 
@@ -1777,6 +1892,10 @@ msgstr ""
 msgid "SPI Re-initialization error"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/busio/SPI.c
+msgid "SPI peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiomixer/Mixer.c
 msgid "Sample rate must be positive"
 msgstr ""
@@ -1807,6 +1926,14 @@ msgstr ""
 msgid "Server side context cannot have hostname"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Set pin count must be between 1 and 5"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Side set pin count must be between 1 and 5"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Size not supported"
 msgstr ""
@@ -1971,6 +2098,10 @@ msgstr ""
 msgid "UART Re-init error"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/busio/UART.c
+msgid "UART not yet supported"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr ""
@@ -2076,7 +2207,8 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr ""
 
@@ -2127,6 +2259,7 @@ msgid "WARNING: Your code filename has two extensions\n"
 msgstr ""
 
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
 msgstr ""
 
@@ -3525,6 +3658,14 @@ msgstr ""
 msgid "pressing both buttons at start up.\n"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "pull_threshold must be between 1 and 32"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "push_threshold must be between 1 and 32"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr ""
@@ -3728,6 +3869,7 @@ msgstr ""
 
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "timeout duration exceeded the maximum supported value"
 msgstr ""
 
diff --git a/locale/nl.po b/locale/nl.po
index 2829bd9e8..a82eeb207 100644
--- a/locale/nl.po
+++ b/locale/nl.po
@@ -342,6 +342,10 @@ msgstr "Alle UART peripherals zijn in gebruik"
 msgid "All event channels in use"
 msgstr "Alle event kanalen zijn in gebruik"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "All state machines in use"
+msgstr ""
+
 #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "All sync event channels in use"
 msgstr "Alle sync event kanalen zijn in gebruik"
@@ -390,6 +394,7 @@ msgstr "AnalogIn niet ondersteund door gegeven pin"
 #: ports/cxd56/common-hal/analogio/AnalogOut.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c
 #: ports/nrf/common-hal/analogio/AnalogOut.c
+#: ports/raspberrypi/common-hal/analogio/AnalogOut.c
 msgid "AnalogOut functionality not supported"
 msgstr "AnalogOut functionaliteit niet ondersteund"
 
@@ -591,6 +596,7 @@ msgstr "Kan waardes niet verwijderen"
 #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
 #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c
 #: ports/nrf/common-hal/digitalio/DigitalInOut.c
+#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c
 msgid "Cannot get pull while in output mode"
 msgstr "get pull kan niet gedurende output mode"
 
@@ -874,7 +880,8 @@ msgstr "Fout in regex"
 msgid "Error: Failure to bind"
 msgstr ""
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
 #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 #: shared-bindings/terminalio/Terminal.c
@@ -1057,6 +1064,10 @@ msgstr "I/O actie op gesloten bestand"
 msgid "I2C Init Error"
 msgstr "I2C Init Fout"
 
+#: ports/raspberrypi/common-hal/busio/I2C.c
+msgid "I2C peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiobusio/I2SOut.c
 msgid "I2SOut not available"
 msgstr "I2SOut is niet beschikbaar"
@@ -1082,6 +1093,10 @@ msgstr ""
 msgid "Incorrect buffer size"
 msgstr "Incorrecte buffer grootte"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Init program size invalid"
+msgstr ""
+
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "Initialization failed due to lack of memory"
 msgstr "De initialisatie is mislukt vanwege een gebrek aan geheugen"
@@ -1094,6 +1109,31 @@ msgstr "Invoer duurt te lang"
 msgid "Input/output error"
 msgstr "Input/Output fout"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d jumps on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts in more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts out more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d uses extra pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d waits on input outside of count"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 msgid "Insufficient authentication"
 msgstr "Onvoldoende authenticatie"
@@ -1145,7 +1185,7 @@ msgstr "Ongeldige DAC pin opgegeven"
 
 #: ports/atmel-samd/common-hal/pwmio/PWMOut.c
 #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c
-#: shared-bindings/pwmio/PWMOut.c
+#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c
 msgid "Invalid PWM frequency"
 msgstr "Ongeldige PWM frequentie"
 
@@ -1239,6 +1279,8 @@ msgstr "Ongeldige pin voor rechter kanaal"
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/SPI.c
 msgid "Invalid pins"
 msgstr "Ongeldige pinnen"
 
@@ -1360,6 +1402,36 @@ msgstr "Microfoon opstart vertraging moet in bereik van 0.0 tot 1.0 zijn"
 msgid "Missing MISO or MOSI Pin"
 msgstr "Ontbrekende MISO of MOSI Pin"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d reads pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d waits based on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d writes pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_set_pin. Instruction %d sets pin(s)"
+msgstr ""
+
 #: shared-bindings/displayio/Group.c
 msgid "Must be a %q subclass."
 msgstr "%q moet een subklasse zijn."
@@ -1413,14 +1485,14 @@ msgstr "Geen MOSI pin"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr "Geen RX pin"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
 msgstr "Geen TX pin"
 
@@ -1477,6 +1549,10 @@ msgstr "Geen timers meer beschikbaar op deze pin."
 msgid "No network with that ssid"
 msgstr "Geen netwerk met dat SSID gevonden"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "No out in program"
+msgstr ""
+
 #: shared-module/touchio/TouchIn.c
 msgid "No pulldown on pin; 1Mohm recommended"
 msgstr "Geen pulldown op pin; 1MOhm aangeraden"
@@ -1534,6 +1610,10 @@ msgstr "Oneven pariteit is niet ondersteund"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Alleen 8 of 16 bit mono met "
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Only IN/OUT of up to 8 supported"
+msgstr ""
+
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr "Alleen IPv4 adressen worden ondersteund"
@@ -1613,6 +1693,7 @@ msgstr ""
 "tijdens constructie."
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr "ParallelBus nog niet ondersteund"
@@ -1625,11 +1706,20 @@ msgstr ""
 msgid "Permission denied"
 msgstr "Toegang geweigerd"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Pin count must be at least 1"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Pin count too large"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 #: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
+#: ports/raspberrypi/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
 msgid "Pin does not have ADC capabilities"
 msgstr "Pin heeft geen ADC mogelijkheden"
@@ -1699,10 +1789,34 @@ msgstr ""
 msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does IN without loading ISR"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does OUT without loading OSR"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program must contain at least one 16-bit instruction."
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program size invalid"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program too large"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr "Pull niet gebruikt wanneer de richting output is."
 
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
+msgid "RAISE mode is not implemented"
+msgstr ""
+
 #: ports/stm/common-hal/os/__init__.c
 msgid "RNG DeInit Error"
 msgstr "RNG DeInit Fout"
@@ -1785,6 +1899,7 @@ msgstr "SD kaart CSD formaat niet ondersteund"
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA of SCL hebben een pullup nodig"
 
@@ -1806,6 +1921,10 @@ msgstr "SPI Init Fout"
 msgid "SPI Re-initialization error"
 msgstr "SPI Herinitialisatie Fout"
 
+#: ports/raspberrypi/common-hal/busio/SPI.c
+msgid "SPI peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiomixer/Mixer.c
 msgid "Sample rate must be positive"
 msgstr "Sample rate moet positief zijn"
@@ -1836,6 +1955,14 @@ msgstr "Serializer in gebruik"
 msgid "Server side context cannot have hostname"
 msgstr "Context aan de serverkant kan geen hostnaam hebben"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Set pin count must be between 1 and 5"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Side set pin count must be between 1 and 5"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Size not supported"
 msgstr "Afmeting niet ondersteund"
@@ -2010,6 +2137,10 @@ msgstr "UART Init Fout"
 msgid "UART Re-init error"
 msgstr "UART Re-init Fout"
 
+#: ports/raspberrypi/common-hal/busio/UART.c
+msgid "UART not yet supported"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr "UART schrijf fout"
@@ -2116,7 +2247,8 @@ msgstr ""
 "apparaat geweigerd of genegeerd werd."
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Niet-ondersteunde baudsnelheid"
 
@@ -2167,6 +2299,7 @@ msgid "WARNING: Your code filename has two extensions\n"
 msgstr "WAARSCHUWING: De bestandsnaam van de code heeft twee extensies\n"
 
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
 msgstr ""
 "WatchDogTimer kan niet worden gedeïnitialiseerd zodra de modus in ingesteld "
@@ -3583,6 +3716,14 @@ msgstr "druk bootknop in bij opstarten.\n"
 msgid "pressing both buttons at start up.\n"
 msgstr "druk beide knoppen in bij opstarten.\n"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "pull_threshold must be between 1 and 32"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "push_threshold must be between 1 and 32"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr "wachtrij overloop"
@@ -3788,6 +3929,7 @@ msgstr "time.struct_time() accepteert een 9-rij"
 
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "timeout duration exceeded the maximum supported value"
 msgstr "time-outduur is groter dan de ondersteunde maximale waarde"
 
diff --git a/locale/pl.po b/locale/pl.po
index 0c03a0ee0..fcd675784 100644
--- a/locale/pl.po
+++ b/locale/pl.po
@@ -344,6 +344,10 @@ msgstr "Wszystkie peryferia UART w użyciu"
 msgid "All event channels in use"
 msgstr "Wszystkie kanały zdarzeń w użyciu"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "All state machines in use"
+msgstr ""
+
 #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "All sync event channels in use"
 msgstr "Wszystkie kanały zdarzeń synchronizacji w użyciu"
@@ -392,6 +396,7 @@ msgstr "AnalogIn nie jest obsługiwany na danym pinie"
 #: ports/cxd56/common-hal/analogio/AnalogOut.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c
 #: ports/nrf/common-hal/analogio/AnalogOut.c
+#: ports/raspberrypi/common-hal/analogio/AnalogOut.c
 msgid "AnalogOut functionality not supported"
 msgstr "AnalogOut jest niewspierane"
 
@@ -593,6 +598,7 @@ msgstr "Nie można usunąć"
 #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
 #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c
 #: ports/nrf/common-hal/digitalio/DigitalInOut.c
+#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c
 msgid "Cannot get pull while in output mode"
 msgstr "Nie ma podciągnięcia w trybie wyjścia"
 
@@ -874,7 +880,8 @@ msgstr "Błąd w regex"
 msgid "Error: Failure to bind"
 msgstr ""
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
 #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 #: shared-bindings/terminalio/Terminal.c
@@ -1056,6 +1063,10 @@ msgstr "Operacja I/O na zamkniętym pliku"
 msgid "I2C Init Error"
 msgstr "Błąd inicjalizacji I2C"
 
+#: ports/raspberrypi/common-hal/busio/I2C.c
+msgid "I2C peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiobusio/I2SOut.c
 msgid "I2SOut not available"
 msgstr "I2SOut niedostępne"
@@ -1081,6 +1092,10 @@ msgstr ""
 msgid "Incorrect buffer size"
 msgstr "Niewłaściwa wielkość bufora"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Init program size invalid"
+msgstr ""
+
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "Initialization failed due to lack of memory"
 msgstr "Inicjalizacja nie powiodła się z powodu braku pamięci"
@@ -1093,6 +1108,31 @@ msgstr ""
 msgid "Input/output error"
 msgstr "Błąd I/O"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d jumps on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts in more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts out more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d uses extra pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d waits on input outside of count"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 msgid "Insufficient authentication"
 msgstr "Niewystarczające uwierzytelnienie"
@@ -1144,7 +1184,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/pwmio/PWMOut.c
 #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c
-#: shared-bindings/pwmio/PWMOut.c
+#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c
 msgid "Invalid PWM frequency"
 msgstr "Zła częstotliwość PWM"
 
@@ -1238,6 +1278,8 @@ msgstr "Zła nóżka dla prawego kanału"
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/SPI.c
 msgid "Invalid pins"
 msgstr "Złe nóżki"
 
@@ -1360,6 +1402,36 @@ msgstr "Opóźnienie włączenia mikrofonu musi być w zakresie od 0.0 do 1.0"
 msgid "Missing MISO or MOSI Pin"
 msgstr "Brak pinu MISO lub MOSI"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d reads pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d waits based on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d writes pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_set_pin. Instruction %d sets pin(s)"
+msgstr ""
+
 #: shared-bindings/displayio/Group.c
 msgid "Must be a %q subclass."
 msgstr ""
@@ -1413,14 +1485,14 @@ msgstr "Brak pinu MOSI"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr "Brak nóżki RX"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
 msgstr "Brak nóżki TX"
 
@@ -1477,6 +1549,10 @@ msgstr ""
 msgid "No network with that ssid"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "No out in program"
+msgstr ""
+
 #: shared-module/touchio/TouchIn.c
 msgid "No pulldown on pin; 1Mohm recommended"
 msgstr ""
@@ -1532,6 +1608,10 @@ msgstr "Nieparzysta parzystość nie jest wspierana"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Tylko 8 lub 16 bitów mono z "
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Only IN/OUT of up to 8 supported"
+msgstr ""
+
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr ""
@@ -1604,6 +1684,7 @@ msgid ""
 msgstr "Nie można zmienić częstotliwości PWM gdy variable_frequency=False."
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr "ParallelBus nie jest jeszcze obsługiwany"
@@ -1616,11 +1697,20 @@ msgstr ""
 msgid "Permission denied"
 msgstr "Odmowa dostępu"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Pin count must be at least 1"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Pin count too large"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 #: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
+#: ports/raspberrypi/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
 msgid "Pin does not have ADC capabilities"
 msgstr "Nóżka nie obsługuje ADC"
@@ -1681,10 +1771,34 @@ msgstr ""
 msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does IN without loading ISR"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does OUT without loading OSR"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program must contain at least one 16-bit instruction."
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program size invalid"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program too large"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr "Podciągnięcie nieużywane w trybie wyjścia."
 
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
+msgid "RAISE mode is not implemented"
+msgstr ""
+
 #: ports/stm/common-hal/os/__init__.c
 msgid "RNG DeInit Error"
 msgstr ""
@@ -1767,6 +1881,7 @@ msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA lub SCL wymagają podciągnięcia"
 
@@ -1788,6 +1903,10 @@ msgstr "Błąd inicjowania SPI"
 msgid "SPI Re-initialization error"
 msgstr "Błąd ponownej inicjalizacji SPI"
 
+#: ports/raspberrypi/common-hal/busio/SPI.c
+msgid "SPI peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiomixer/Mixer.c
 msgid "Sample rate must be positive"
 msgstr "Częstotliwość próbkowania musi być dodatnia"
@@ -1818,6 +1937,14 @@ msgstr "Serializator w użyciu"
 msgid "Server side context cannot have hostname"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Set pin count must be between 1 and 5"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Side set pin count must be between 1 and 5"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Size not supported"
 msgstr ""
@@ -1982,6 +2109,10 @@ msgstr ""
 msgid "UART Re-init error"
 msgstr ""
 
+#: ports/raspberrypi/common-hal/busio/UART.c
+msgid "UART not yet supported"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr "Błąd zapisu UART"
@@ -2086,7 +2217,8 @@ msgid ""
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Zła szybkość transmisji"
 
@@ -2137,6 +2269,7 @@ msgid "WARNING: Your code filename has two extensions\n"
 msgstr "UWAGA: Nazwa pliku ma dwa rozszerzenia\n"
 
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
 msgstr ""
 
@@ -3543,6 +3676,14 @@ msgstr ""
 msgid "pressing both buttons at start up.\n"
 msgstr ""
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "pull_threshold must be between 1 and 32"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "push_threshold must be between 1 and 32"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr "przepełnienie kolejki"
@@ -3747,6 +3888,7 @@ msgstr "time.struct_time() wymaga 9-elementowej sekwencji"
 
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "timeout duration exceeded the maximum supported value"
 msgstr ""
 
diff --git a/locale/pt_BR.po b/locale/pt_BR.po
index b8e98ebd6..b1e5757b5 100644
--- a/locale/pt_BR.po
+++ b/locale/pt_BR.po
@@ -352,6 +352,10 @@ msgstr "Todos os periféricos UART estão em uso"
 msgid "All event channels in use"
 msgstr "Todos os canais de eventos em uso"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "All state machines in use"
+msgstr ""
+
 #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "All sync event channels in use"
 msgstr "Todos os canais dos eventos de sincronização em uso"
@@ -400,6 +404,7 @@ msgstr "O AnalogIn não é compatível no pino informado"
 #: ports/cxd56/common-hal/analogio/AnalogOut.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c
 #: ports/nrf/common-hal/analogio/AnalogOut.c
+#: ports/raspberrypi/common-hal/analogio/AnalogOut.c
 msgid "AnalogOut functionality not supported"
 msgstr "Funcionalidade AnalogOut não suportada"
 
@@ -608,6 +613,7 @@ msgstr "Não é possível excluir valores"
 #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
 #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c
 #: ports/nrf/common-hal/digitalio/DigitalInOut.c
+#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c
 msgid "Cannot get pull while in output mode"
 msgstr "Não é possível obter (pull) enquanto estiver no modo saída"
 
@@ -892,7 +898,8 @@ msgstr "Erro no regex"
 msgid "Error: Failure to bind"
 msgstr "Erro: Falha na vinculação"
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
 #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 #: shared-bindings/terminalio/Terminal.c
@@ -1075,6 +1082,10 @@ msgstr "Operação I/O no arquivo fechado"
 msgid "I2C Init Error"
 msgstr "Erro de inicialização do I2C"
 
+#: ports/raspberrypi/common-hal/busio/I2C.c
+msgid "I2C peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiobusio/I2SOut.c
 msgid "I2SOut not available"
 msgstr "O I2SOut não está disponível"
@@ -1100,6 +1111,10 @@ msgstr ""
 msgid "Incorrect buffer size"
 msgstr "O tamanho do buffer está incorreto"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Init program size invalid"
+msgstr ""
+
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "Initialization failed due to lack of memory"
 msgstr "A inicialização falhou devido à falta de memória"
@@ -1112,6 +1127,31 @@ msgstr "A entrada está demorando demais"
 msgid "Input/output error"
 msgstr "Erro de entrada/saída"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d jumps on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts in more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts out more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d uses extra pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d waits on input outside of count"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 msgid "Insufficient authentication"
 msgstr "Autenticação insuficiente"
@@ -1163,7 +1203,7 @@ msgstr "O pino DAC informado é inválido"
 
 #: ports/atmel-samd/common-hal/pwmio/PWMOut.c
 #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c
-#: shared-bindings/pwmio/PWMOut.c
+#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c
 msgid "Invalid PWM frequency"
 msgstr "Frequência PWM inválida"
 
@@ -1257,6 +1297,8 @@ msgstr "Pino inválido para canal direito"
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/SPI.c
 msgid "Invalid pins"
 msgstr "Pinos inválidos"
 
@@ -1378,6 +1420,36 @@ msgstr "O atraso na inicialização do microfone deve estar entre 0,0 e 1,0"
 msgid "Missing MISO or MOSI Pin"
 msgstr "O pino MISO ou MOSI está ausente"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d reads pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d waits based on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d writes pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_set_pin. Instruction %d sets pin(s)"
+msgstr ""
+
 #: shared-bindings/displayio/Group.c
 msgid "Must be a %q subclass."
 msgstr "Deve ser uma subclasse %q."
@@ -1431,14 +1503,14 @@ msgstr "Nenhum pino MOSI"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr "Nenhum pino RX"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
 msgstr "Nenhum pino TX"
 
@@ -1495,6 +1567,10 @@ msgstr "Não há mais temporizadores disponíveis neste pino."
 msgid "No network with that ssid"
 msgstr "Não há rede com este ssid"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "No out in program"
+msgstr ""
+
 #: shared-module/touchio/TouchIn.c
 msgid "No pulldown on pin; 1Mohm recommended"
 msgstr "Não há pulldown no pino; É recomendável utilizar um resistor de 1M ohm"
@@ -1551,6 +1627,10 @@ msgstr "A paridade ímpar não é compatível"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Apenas mono com 8 ou 16 bits com "
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Only IN/OUT of up to 8 supported"
+msgstr ""
+
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr "Somente os endereços IPv4 são suportados"
@@ -1631,6 +1711,7 @@ msgstr ""
 "na construção."
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr "O ParallelBus ainda não é compatível"
@@ -1643,11 +1724,20 @@ msgstr "O periférico está em uso"
 msgid "Permission denied"
 msgstr "Permissão negada"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Pin count must be at least 1"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Pin count too large"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 #: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
+#: ports/raspberrypi/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
 msgid "Pin does not have ADC capabilities"
 msgstr "O pino não tem recursos de ADC"
@@ -1720,10 +1810,34 @@ msgstr ""
 "Tentando entrar no deep sleep até o alarme, pressione CTRL-C ou grave o "
 "arquivo.\n"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does IN without loading ISR"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does OUT without loading OSR"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program must contain at least one 16-bit instruction."
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program size invalid"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program too large"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr "O Pull não foi usado quando a direção for gerada."
 
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
+msgid "RAISE mode is not implemented"
+msgstr ""
+
 #: ports/stm/common-hal/os/__init__.c
 msgid "RNG DeInit Error"
 msgstr "Erro DeInit RNG"
@@ -1806,6 +1920,7 @@ msgstr "O formato CSD do Cartão SD não é compatível"
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA ou SCL precisa de um pull up"
 
@@ -1827,6 +1942,10 @@ msgstr "Houve um erro na inicialização SPI"
 msgid "SPI Re-initialization error"
 msgstr "Houve um erro na reinicialização SPI"
 
+#: ports/raspberrypi/common-hal/busio/SPI.c
+msgid "SPI peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiomixer/Mixer.c
 msgid "Sample rate must be positive"
 msgstr "A taxa de amostragem deve ser positiva"
@@ -1857,6 +1976,14 @@ msgstr "Serializer em uso"
 msgid "Server side context cannot have hostname"
 msgstr "O contexto do lado do servidor não pode ter nome de host"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Set pin count must be between 1 and 5"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Side set pin count must be between 1 and 5"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Size not supported"
 msgstr "O tamanho não é suportado"
@@ -2035,6 +2162,10 @@ msgstr "Houve um erro na inicialização do UART"
 msgid "UART Re-init error"
 msgstr "Houve um erro na reinicialização do UART"
 
+#: ports/raspberrypi/common-hal/busio/UART.c
+msgid "UART not yet supported"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr "Houve um erro na gravação UART"
@@ -2141,7 +2272,8 @@ msgstr ""
 "dispositivo tenha sido recusado ou ignorado."
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Taxa de transmissão não suportada"
 
@@ -2192,6 +2324,7 @@ msgid "WARNING: Your code filename has two extensions\n"
 msgstr "AVISO: Seu arquivo de código tem duas extensões\n"
 
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
 msgstr ""
 "O WatchDogTimer não pode ser não-inicializado uma vez que o modo é definido "
@@ -3620,6 +3753,14 @@ msgstr "pressionando o botão de boot na inicialização.\n"
 msgid "pressing both buttons at start up.\n"
 msgstr "pressionando ambos os botões durante a inicialização.\n"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "pull_threshold must be between 1 and 32"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "push_threshold must be between 1 and 32"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr "estouro de fila"
@@ -3825,6 +3966,7 @@ msgstr "time.struct_time() leva uma sequência com 9"
 
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "timeout duration exceeded the maximum supported value"
 msgstr "a duração do tempo limite excedeu o valor máximo suportado"
 
diff --git a/locale/sv.po b/locale/sv.po
index 3aa0dcc1e..f1595dfde 100644
--- a/locale/sv.po
+++ b/locale/sv.po
@@ -346,6 +346,10 @@ msgstr "Alla UART-kringutrustning används"
 msgid "All event channels in use"
 msgstr "Alla händelsekanaler används"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "All state machines in use"
+msgstr ""
+
 #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "All sync event channels in use"
 msgstr "Alla händelsekanaler används"
@@ -394,6 +398,7 @@ msgstr "AnalogIn stöds inte på angiven pinne"
 #: ports/cxd56/common-hal/analogio/AnalogOut.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c
 #: ports/nrf/common-hal/analogio/AnalogOut.c
+#: ports/raspberrypi/common-hal/analogio/AnalogOut.c
 msgid "AnalogOut functionality not supported"
 msgstr "AnalogOut-funktionalitet stöds inte"
 
@@ -596,6 +601,7 @@ msgstr "Kan inte radera värden"
 #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
 #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c
 #: ports/nrf/common-hal/digitalio/DigitalInOut.c
+#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c
 msgid "Cannot get pull while in output mode"
 msgstr "Kan inte ange pull i output-läge"
 
@@ -879,7 +885,8 @@ msgstr "Fel i regex"
 msgid "Error: Failure to bind"
 msgstr "Fel: Bind misslyckades"
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
 #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 #: shared-bindings/terminalio/Terminal.c
@@ -1061,6 +1068,10 @@ msgstr "I/O-operation på stängd fil"
 msgid "I2C Init Error"
 msgstr "I2C init-fel"
 
+#: ports/raspberrypi/common-hal/busio/I2C.c
+msgid "I2C peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiobusio/I2SOut.c
 msgid "I2SOut not available"
 msgstr "I2SOut är inte tillgängligt"
@@ -1086,6 +1097,10 @@ msgstr ""
 msgid "Incorrect buffer size"
 msgstr "Fel buffertstorlek"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Init program size invalid"
+msgstr ""
+
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "Initialization failed due to lack of memory"
 msgstr "Initieringen misslyckades på grund av minnesbrist"
@@ -1098,6 +1113,31 @@ msgstr "Indata tar för lång tid"
 msgid "Input/output error"
 msgstr "Indata-/utdatafel"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d jumps on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts in more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts out more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d uses extra pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d waits on input outside of count"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 msgid "Insufficient authentication"
 msgstr "Otillräcklig autentisering"
@@ -1149,7 +1189,7 @@ msgstr "Ogiltig DAC-pinne angiven"
 
 #: ports/atmel-samd/common-hal/pwmio/PWMOut.c
 #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c
-#: shared-bindings/pwmio/PWMOut.c
+#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c
 msgid "Invalid PWM frequency"
 msgstr "Ogiltig PWM-frekvens"
 
@@ -1243,6 +1283,8 @@ msgstr "Ogiltig pinne för höger kanal"
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/SPI.c
 msgid "Invalid pins"
 msgstr "Ogiltiga pinnar"
 
@@ -1365,6 +1407,36 @@ msgstr ""
 msgid "Missing MISO or MOSI Pin"
 msgstr "MISO- eller MOSI-pinne saknas"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d reads pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d waits based on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d writes pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_set_pin. Instruction %d sets pin(s)"
+msgstr ""
+
 #: shared-bindings/displayio/Group.c
 msgid "Must be a %q subclass."
 msgstr "Måste vara en %q-subklass."
@@ -1418,14 +1490,14 @@ msgstr "Ingen MOSI-pinne"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr "Ingen RX-pinne"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
 msgstr "Ingen TX-pinne"
 
@@ -1482,6 +1554,10 @@ msgstr "Inga fler timers tillgängliga på denna pinne."
 msgid "No network with that ssid"
 msgstr "Inget nätverk med sådant ssid"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "No out in program"
+msgstr ""
+
 #: shared-module/touchio/TouchIn.c
 msgid "No pulldown on pin; 1Mohm recommended"
 msgstr "Ingen pulldown på pinnen; 1Mohm rekommenderas"
@@ -1539,6 +1615,10 @@ msgstr "Udda paritet stöds inte"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Endast 8 eller 16 bitars mono med "
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Only IN/OUT of up to 8 supported"
+msgstr ""
+
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr "Endast IPv4-adresser stöds"
@@ -1616,6 +1696,7 @@ msgstr ""
 "skapandet."
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr "ParallelBus stöds ännu inte"
@@ -1628,11 +1709,20 @@ msgstr "Periferi i bruk"
 msgid "Permission denied"
 msgstr "Åtkomst nekad"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Pin count must be at least 1"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Pin count too large"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 #: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
+#: ports/raspberrypi/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
 msgid "Pin does not have ADC capabilities"
 msgstr "Pinnen har inte ADC-funktionalitet"
@@ -1702,10 +1792,34 @@ msgstr ""
 msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n"
 msgstr "Fingerar djup sömn tills larm, Ctrl-C eller filskrivning.\n"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does IN without loading ISR"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does OUT without loading OSR"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program must contain at least one 16-bit instruction."
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program size invalid"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program too large"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr "Pull används inte när riktningen är output."
 
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
+msgid "RAISE mode is not implemented"
+msgstr ""
+
 #: ports/stm/common-hal/os/__init__.c
 msgid "RNG DeInit Error"
 msgstr "RNG DeInit-fel"
@@ -1788,6 +1902,7 @@ msgstr "SD-kort CSD-format stöds inte"
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA eller SCL behöver en pullup"
 
@@ -1809,6 +1924,10 @@ msgstr "SPI Init-fel"
 msgid "SPI Re-initialization error"
 msgstr "SPI reinitialiseringsfel"
 
+#: ports/raspberrypi/common-hal/busio/SPI.c
+msgid "SPI peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiomixer/Mixer.c
 msgid "Sample rate must be positive"
 msgstr "Samplingsfrekvensen måste vara positiv"
@@ -1839,6 +1958,14 @@ msgstr "Serializern används redan"
 msgid "Server side context cannot have hostname"
 msgstr "Serversidans kontext kan inte ha värdnamn"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Set pin count must be between 1 and 5"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Side set pin count must be between 1 and 5"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Size not supported"
 msgstr "Storleken stöds inte"
@@ -2013,6 +2140,10 @@ msgstr "UART Init-fel"
 msgid "UART Re-init error"
 msgstr "UART reinit-fel"
 
+#: ports/raspberrypi/common-hal/busio/UART.c
+msgid "UART not yet supported"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr "UART skrivfel"
@@ -2119,7 +2250,8 @@ msgstr ""
 "eller ignorerades."
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Baudrate stöd inte"
 
@@ -2170,6 +2302,7 @@ msgid "WARNING: Your code filename has two extensions\n"
 msgstr "VARNING: Ditt filnamn för kod har två tillägg\n"
 
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
 msgstr "WatchDogTimer kan inte avinitialiseras när läget är inställt på RESET"
 
@@ -3583,6 +3716,14 @@ msgstr "trycka på startknappen vid start.\n"
 msgid "pressing both buttons at start up.\n"
 msgstr "trycka båda knapparna vid uppstart.\n"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "pull_threshold must be between 1 and 32"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "push_threshold must be between 1 and 32"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr "köstorlek överskreds"
@@ -3788,6 +3929,7 @@ msgstr "time.struct_time() kräver en 9-sekvens"
 
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "timeout duration exceeded the maximum supported value"
 msgstr "timeout-längd överskred det maximala värde som stöds"
 
diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po
index 2af80013b..37f1fbd35 100644
--- a/locale/zh_Latn_pinyin.po
+++ b/locale/zh_Latn_pinyin.po
@@ -349,6 +349,10 @@ msgstr "Suǒyǒu UART wàiwéi zhèngzài shǐyòng"
 msgid "All event channels in use"
 msgstr "Suǒyǒu shǐyòng de shìjiàn píndào"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "All state machines in use"
+msgstr ""
+
 #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c
 msgid "All sync event channels in use"
 msgstr "Suǒyǒu tóngbù shìjiàn píndào shǐyòng"
@@ -397,6 +401,7 @@ msgstr "Gěi dìng de yǐn jiǎo bù zhīchí AnalogIn"
 #: ports/cxd56/common-hal/analogio/AnalogOut.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c
 #: ports/nrf/common-hal/analogio/AnalogOut.c
+#: ports/raspberrypi/common-hal/analogio/AnalogOut.c
 msgid "AnalogOut functionality not supported"
 msgstr "Bù zhīchí AnalogOut gōngnéng"
 
@@ -600,6 +605,7 @@ msgstr "Wúfǎ shānchú zhí"
 #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
 #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c
 #: ports/nrf/common-hal/digitalio/DigitalInOut.c
+#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c
 msgid "Cannot get pull while in output mode"
 msgstr "Zài shūchū móshì xià wúfǎ huòqǔ lādòng"
 
@@ -879,7 +885,8 @@ msgstr "Zhèngzé biǎodá shì cuòwù"
 msgid "Error: Failure to bind"
 msgstr "cuò wù: bǎng dìng shī bài"
 
-#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c
+#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
 #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c
 #: shared-bindings/neopixel_write/__init__.c
 #: shared-bindings/terminalio/Terminal.c
@@ -1061,6 +1068,10 @@ msgstr "Wénjiàn shàng de I/ O cāozuò"
 msgid "I2C Init Error"
 msgstr "I2C chūshǐhuà cuòwù"
 
+#: ports/raspberrypi/common-hal/busio/I2C.c
+msgid "I2C peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiobusio/I2SOut.c
 msgid "I2SOut not available"
 msgstr "I2SOut bù kě yòng"
@@ -1086,6 +1097,10 @@ msgstr ""
 msgid "Incorrect buffer size"
 msgstr "Huǎnchōng qū dàxiǎo bù zhèngquè"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Init program size invalid"
+msgstr ""
+
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 msgid "Initialization failed due to lack of memory"
 msgstr "yóu yú nèi cún bù zú, chū shǐ huà shī bài"
@@ -1098,6 +1113,31 @@ msgstr "Shūrù shíjiānguò zhǎng"
 msgid "Input/output error"
 msgstr "Shūrù/shūchū cuòwù"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d jumps on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts in more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d shifts out more bits than pin count"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d uses extra pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Instruction %d waits on input outside of count"
+msgstr ""
+
 #: ports/nrf/common-hal/_bleio/__init__.c
 msgid "Insufficient authentication"
 msgstr "Rènzhèng bùzú"
@@ -1149,7 +1189,7 @@ msgstr "Tí gōng liǎo wúxiào de DAC yǐn jiǎo"
 
 #: ports/atmel-samd/common-hal/pwmio/PWMOut.c
 #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c
-#: shared-bindings/pwmio/PWMOut.c
+#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c
 msgid "Invalid PWM frequency"
 msgstr "Wúxiào de PWM pínlǜ"
 
@@ -1243,6 +1283,8 @@ msgstr "Yòuxián tōngdào yǐn jiǎo wúxiào"
 #: ports/mimxrt10xx/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/SPI.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/SPI.c
 msgid "Invalid pins"
 msgstr "Wúxiào de yǐn jiǎo"
 
@@ -1364,6 +1406,36 @@ msgstr "Màikèfēng qǐdòng yánchí bìxū zài 0.0 Dào 1.0 De fànwéi nèi
 msgid "Missing MISO or MOSI Pin"
 msgstr "Quēshǎo MISO huò MOSI yǐn jiǎo"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d reads pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_in_pin. Instruction %d waits based on pin"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_out_pin. Instruction %d writes pin(s)"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+#, c-format
+msgid "Missing first_set_pin. Instruction %d sets pin(s)"
+msgstr ""
+
 #: shared-bindings/displayio/Group.c
 msgid "Must be a %q subclass."
 msgstr "Bìxū shì %q zi lèi."
@@ -1417,14 +1489,14 @@ msgstr "Méiyǒu MOSI yǐn jiǎo"
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No RX pin"
 msgstr "Wèi zhǎodào RX yǐn jiǎo"
 
 #: ports/atmel-samd/common-hal/busio/UART.c
 #: ports/esp32s2/common-hal/busio/UART.c
 #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "No TX pin"
 msgstr "Wèi zhǎodào TX yǐn jiǎo"
 
@@ -1481,6 +1553,10 @@ msgstr "Gāi yǐn jiǎo shàng méiyǒu kěyòng de dìngshí qì."
 msgid "No network with that ssid"
 msgstr "Méiyǒu wǎngluò yǔ gāi ssid"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "No out in program"
+msgstr ""
+
 #: shared-module/touchio/TouchIn.c
 msgid "No pulldown on pin; 1Mohm recommended"
 msgstr "Yǐn jiǎo shàng méiyǒu xiàlā; 1Mohm tuījiàn"
@@ -1537,6 +1613,10 @@ msgstr "Bù zhīchí jīshù"
 msgid "Only 8 or 16 bit mono with "
 msgstr "Zhǐyǒu 8 huò 16 wèi dānwèi "
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Only IN/OUT of up to 8 supported"
+msgstr ""
+
 #: ports/esp32s2/common-hal/wifi/__init__.c
 msgid "Only IPv4 addresses supported"
 msgstr "Jǐn zhīchí IPv4 dìzhǐ"
@@ -1614,6 +1694,7 @@ msgid ""
 msgstr "Dāng biànliàng_pínlǜ shì False zài jiànzhú shí PWM pínlǜ bùkě xiě."
 
 #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
+#: ports/raspberrypi/common-hal/displayio/ParallelBus.c
 #: ports/stm/common-hal/displayio/ParallelBus.c
 msgid "ParallelBus not yet supported"
 msgstr "Shàng bù zhīchí ParallelBus"
@@ -1626,11 +1707,20 @@ msgstr "shǐ yòng zhōng de wài shè"
 msgid "Permission denied"
 msgstr "Quánxiàn bèi jùjué"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Pin count must be at least 1"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Pin count too large"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/analogio/AnalogIn.c
 #: ports/cxd56/common-hal/analogio/AnalogIn.c
 #: ports/esp32s2/common-hal/analogio/AnalogIn.c
 #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
 #: ports/nrf/common-hal/analogio/AnalogIn.c
+#: ports/raspberrypi/common-hal/analogio/AnalogIn.c
 #: ports/stm/common-hal/analogio/AnalogIn.c
 msgid "Pin does not have ADC capabilities"
 msgstr "Pin méiyǒu ADC nénglì"
@@ -1697,10 +1787,34 @@ msgstr ""
 "jiǎ zhuāng shēn dù shuì mián , zhí dào bào jǐng , CTRL-C huò wén jiàn xiě "
 "rù .\n"
 
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does IN without loading ISR"
+msgstr ""
+
+#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
+msgid "Program does OUT without loading OSR"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program must contain at least one 16-bit instruction."
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program size invalid"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Program too large"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr "Fāngxiàng shūchū shí Pull méiyǒu shǐyòng."
 
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
+msgid "RAISE mode is not implemented"
+msgstr ""
+
 #: ports/stm/common-hal/os/__init__.c
 msgid "RNG DeInit Error"
 msgstr "RNG qǔxiāo chūshǐhuà cuòwù"
@@ -1783,6 +1897,7 @@ msgstr "Bù zhīchí SD kǎ CSD géshì"
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
 #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
+#: ports/raspberrypi/common-hal/busio/I2C.c
 msgid "SDA or SCL needs a pull up"
 msgstr "SDA huò SCL xūyào lādòng"
 
@@ -1804,6 +1919,10 @@ msgstr "SPI chūshǐhuà cuòwù"
 msgid "SPI Re-initialization error"
 msgstr "SPI chóngxīn chūshǐhuà cuòwù"
 
+#: ports/raspberrypi/common-hal/busio/SPI.c
+msgid "SPI peripheral in use"
+msgstr ""
+
 #: shared-bindings/audiomixer/Mixer.c
 msgid "Sample rate must be positive"
 msgstr "Cǎiyàng lǜ bìxū wèi zhèng shù"
@@ -1834,6 +1953,14 @@ msgstr "Xùliè huà yǐjīng shǐyòngguò"
 msgid "Server side context cannot have hostname"
 msgstr "Fúwùqì duān shàngxiàwén bùnéng jùyǒu zhǔjī míng"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Set pin count must be between 1 and 5"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "Side set pin count must be between 1 and 5"
+msgstr ""
+
 #: ports/cxd56/common-hal/camera/Camera.c
 msgid "Size not supported"
 msgstr "bù zhī chí dà xiǎo"
@@ -2007,6 +2134,10 @@ msgstr "UART chūshǐhuà cuòwù"
 msgid "UART Re-init error"
 msgstr "UART chóngxīn chūshǐhuà cuòwù"
 
+#: ports/raspberrypi/common-hal/busio/UART.c
+msgid "UART not yet supported"
+msgstr ""
+
 #: ports/stm/common-hal/busio/UART.c
 msgid "UART write error"
 msgstr "UART xiě cuòwù"
@@ -2113,7 +2244,8 @@ msgstr ""
 "huò hūlüè."
 
 #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
-#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
+#: ports/esp32s2/common-hal/busio/UART.c
+#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c
 msgid "Unsupported baudrate"
 msgstr "Bù zhīchí de baudrate"
 
@@ -2164,6 +2296,7 @@ msgid "WARNING: Your code filename has two extensions\n"
 msgstr "Jǐnggào: Nǐ de dàimǎ wénjiàn míng yǒu liǎng gè kuòzhǎn míng\n"
 
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
 msgstr "Yīdàn jiāng móshì shèzhì wèi RESET, jiù wúfǎ chūshǐhuà WatchDog Timer"
 
@@ -3576,6 +3709,14 @@ msgstr "Zài qǐdòng shí àn qǐdòng ànniǔ.\n"
 msgid "pressing both buttons at start up.\n"
 msgstr "zài qǐdòng shí tóngshí àn xià liǎng gè ànniǔ.\n"
 
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "pull_threshold must be between 1 and 32"
+msgstr ""
+
+#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
+msgid "push_threshold must be between 1 and 32"
+msgstr ""
+
 #: extmod/modutimeq.c
 msgid "queue overflow"
 msgstr "duìliè yìchū"
@@ -3781,6 +3922,7 @@ msgstr "time.struct_time() xūyào 9 xùliè"
 
 #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
 #: ports/nrf/common-hal/watchdog/WatchDogTimer.c
+#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
 msgid "timeout duration exceeded the maximum supported value"
 msgstr "chāoshí shíjiān chāoguò zuìdà zhīchí zhí"