update translate

7 files changed, 98 insertions, 77 deletions

diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot
index 0d6a612b8..ca8d55dcb 100644
--- a/locale/circuitpython.pot
+++ b/locale/circuitpython.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-10-03 11:28+0700\n"
+"POT-Creation-Date: 2018-10-03 23:15+0700\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -361,7 +361,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/SPI.c:132
 #: ports/atmel-samd/common-hal/busio/UART.c:119
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c:45
-#: ports/nrf/common-hal/busio/I2C.c:77
+#: ports/nrf/common-hal/busio/I2C.c:81
 msgid "Invalid pins"
 msgstr ""
 
@@ -694,15 +694,15 @@ msgstr ""
 msgid "AnalogOut functionality not supported"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/I2C.c:91
+#: ports/nrf/common-hal/busio/I2C.c:95
 msgid "All I2C peripherals are in use"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/SPI.c:109
+#: ports/nrf/common-hal/busio/SPI.c:115
 msgid "All SPI peripherals are in use"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/SPI.c:170
+#: ports/nrf/common-hal/busio/SPI.c:176
 msgid "Baud rate too high for this SPI peripheral"
 msgstr ""
 
@@ -719,11 +719,11 @@ msgstr ""
 msgid "Odd parity is not supported"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:318 ports/nrf/common-hal/busio/UART.c:322
-#: ports/nrf/common-hal/busio/UART.c:327 ports/nrf/common-hal/busio/UART.c:332
-#: ports/nrf/common-hal/busio/UART.c:338 ports/nrf/common-hal/busio/UART.c:343
-#: ports/nrf/common-hal/busio/UART.c:348 ports/nrf/common-hal/busio/UART.c:352
-#: ports/nrf/common-hal/busio/UART.c:360
+#: ports/nrf/common-hal/busio/UART.c:322 ports/nrf/common-hal/busio/UART.c:326
+#: ports/nrf/common-hal/busio/UART.c:331 ports/nrf/common-hal/busio/UART.c:336
+#: ports/nrf/common-hal/busio/UART.c:342 ports/nrf/common-hal/busio/UART.c:347
+#: ports/nrf/common-hal/busio/UART.c:352 ports/nrf/common-hal/busio/UART.c:356
+#: ports/nrf/common-hal/busio/UART.c:364
 msgid "busio.UART not available"
 msgstr ""
 
diff --git a/locale/de_DE.po b/locale/de_DE.po
index defe320ca..4579f8c67 100644
--- a/locale/de_DE.po
+++ b/locale/de_DE.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-10-03 11:28+0700\n"
+"POT-Creation-Date: 2018-10-03 23:15+0700\n"
 "PO-Revision-Date: 2018-07-27 11:55-0700\n"
 "Last-Translator: Sebastian Plamauer\n"
 "Language-Team: \n"
@@ -370,7 +370,7 @@ msgstr "Nicht genug Pins vorhanden"
 #: ports/atmel-samd/common-hal/busio/SPI.c:132
 #: ports/atmel-samd/common-hal/busio/UART.c:119
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c:45
-#: ports/nrf/common-hal/busio/I2C.c:77
+#: ports/nrf/common-hal/busio/I2C.c:81
 msgid "Invalid pins"
 msgstr "Ungültige Pins"
 
@@ -703,17 +703,17 @@ msgstr ""
 msgid "AnalogOut functionality not supported"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/I2C.c:91
+#: ports/nrf/common-hal/busio/I2C.c:95
 #, fuzzy
 msgid "All I2C peripherals are in use"
 msgstr "Alle timer werden benutzt"
 
-#: ports/nrf/common-hal/busio/SPI.c:109
+#: ports/nrf/common-hal/busio/SPI.c:115
 #, fuzzy
 msgid "All SPI peripherals are in use"
 msgstr "Alle timer werden benutzt"
 
-#: ports/nrf/common-hal/busio/SPI.c:170
+#: ports/nrf/common-hal/busio/SPI.c:176
 msgid "Baud rate too high for this SPI peripheral"
 msgstr ""
 
@@ -732,11 +732,11 @@ msgstr "ungültiger dupterm index"
 msgid "Odd parity is not supported"
 msgstr "bytes mit merh als 8 bits werden nicht unterstützt"
 
-#: ports/nrf/common-hal/busio/UART.c:318 ports/nrf/common-hal/busio/UART.c:322
-#: ports/nrf/common-hal/busio/UART.c:327 ports/nrf/common-hal/busio/UART.c:332
-#: ports/nrf/common-hal/busio/UART.c:338 ports/nrf/common-hal/busio/UART.c:343
-#: ports/nrf/common-hal/busio/UART.c:348 ports/nrf/common-hal/busio/UART.c:352
-#: ports/nrf/common-hal/busio/UART.c:360
+#: ports/nrf/common-hal/busio/UART.c:322 ports/nrf/common-hal/busio/UART.c:326
+#: ports/nrf/common-hal/busio/UART.c:331 ports/nrf/common-hal/busio/UART.c:336
+#: ports/nrf/common-hal/busio/UART.c:342 ports/nrf/common-hal/busio/UART.c:347
+#: ports/nrf/common-hal/busio/UART.c:352 ports/nrf/common-hal/busio/UART.c:356
+#: ports/nrf/common-hal/busio/UART.c:364
 msgid "busio.UART not available"
 msgstr ""
 
diff --git a/locale/en_US.po b/locale/en_US.po
index a05a3c028..1a120e668 100644
--- a/locale/en_US.po
+++ b/locale/en_US.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-10-03 11:28+0700\n"
+"POT-Creation-Date: 2018-10-03 23:15+0700\n"
 "PO-Revision-Date: 2018-07-27 11:55-0700\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -361,7 +361,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/SPI.c:132
 #: ports/atmel-samd/common-hal/busio/UART.c:119
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c:45
-#: ports/nrf/common-hal/busio/I2C.c:77
+#: ports/nrf/common-hal/busio/I2C.c:81
 msgid "Invalid pins"
 msgstr ""
 
@@ -694,15 +694,15 @@ msgstr ""
 msgid "AnalogOut functionality not supported"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/I2C.c:91
+#: ports/nrf/common-hal/busio/I2C.c:95
 msgid "All I2C peripherals are in use"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/SPI.c:109
+#: ports/nrf/common-hal/busio/SPI.c:115
 msgid "All SPI peripherals are in use"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/SPI.c:170
+#: ports/nrf/common-hal/busio/SPI.c:176
 msgid "Baud rate too high for this SPI peripheral"
 msgstr ""
 
@@ -719,11 +719,11 @@ msgstr ""
 msgid "Odd parity is not supported"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:318 ports/nrf/common-hal/busio/UART.c:322
-#: ports/nrf/common-hal/busio/UART.c:327 ports/nrf/common-hal/busio/UART.c:332
-#: ports/nrf/common-hal/busio/UART.c:338 ports/nrf/common-hal/busio/UART.c:343
-#: ports/nrf/common-hal/busio/UART.c:348 ports/nrf/common-hal/busio/UART.c:352
-#: ports/nrf/common-hal/busio/UART.c:360
+#: ports/nrf/common-hal/busio/UART.c:322 ports/nrf/common-hal/busio/UART.c:326
+#: ports/nrf/common-hal/busio/UART.c:331 ports/nrf/common-hal/busio/UART.c:336
+#: ports/nrf/common-hal/busio/UART.c:342 ports/nrf/common-hal/busio/UART.c:347
+#: ports/nrf/common-hal/busio/UART.c:352 ports/nrf/common-hal/busio/UART.c:356
+#: ports/nrf/common-hal/busio/UART.c:364
 msgid "busio.UART not available"
 msgstr ""
 
diff --git a/locale/es.po b/locale/es.po
index 5d3aee77f..664fd9be7 100644
--- a/locale/es.po
+++ b/locale/es.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-10-03 11:28+0700\n"
+"POT-Creation-Date: 2018-10-03 23:15+0700\n"
 "PO-Revision-Date: 2018-08-24 22:56-0500\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -376,7 +376,7 @@ msgstr "No hay suficientes pines disponibles"
 #: ports/atmel-samd/common-hal/busio/SPI.c:132
 #: ports/atmel-samd/common-hal/busio/UART.c:119
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c:45
-#: ports/nrf/common-hal/busio/I2C.c:77
+#: ports/nrf/common-hal/busio/I2C.c:81
 msgid "Invalid pins"
 msgstr "pines inválidos"
 
@@ -624,7 +624,8 @@ msgstr "len debe de ser múltiple de 4"
 #: ports/esp8266/modesp.c:274
 #, c-format
 msgid "memory allocation failed, allocating %u bytes for native code"
-msgstr "la asignación de memoria ha fallado, asignando %u bytes para código nativo"
+msgstr ""
+"la asignación de memoria ha fallado, asignando %u bytes para código nativo"
 
 #: ports/esp8266/modesp.c:317
 msgid "flash location must be below 1MByte"
@@ -710,15 +711,15 @@ msgstr "parámetro config desconocido"
 msgid "AnalogOut functionality not supported"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/I2C.c:91
+#: ports/nrf/common-hal/busio/I2C.c:95
 msgid "All I2C peripherals are in use"
 msgstr "Todos los timers están siendo utilizados"
 
-#: ports/nrf/common-hal/busio/SPI.c:109
+#: ports/nrf/common-hal/busio/SPI.c:115
 msgid "All SPI peripherals are in use"
 msgstr "Todos los timers están siendo utilizados"
 
-#: ports/nrf/common-hal/busio/SPI.c:170
+#: ports/nrf/common-hal/busio/SPI.c:176
 msgid "Baud rate too high for this SPI peripheral"
 msgstr ""
 
@@ -737,11 +738,11 @@ msgstr "index dupterm inválido"
 msgid "Odd parity is not supported"
 msgstr "bytes > 8 bits no son soportados"
 
-#: ports/nrf/common-hal/busio/UART.c:318 ports/nrf/common-hal/busio/UART.c:322
-#: ports/nrf/common-hal/busio/UART.c:327 ports/nrf/common-hal/busio/UART.c:332
-#: ports/nrf/common-hal/busio/UART.c:338 ports/nrf/common-hal/busio/UART.c:343
-#: ports/nrf/common-hal/busio/UART.c:348 ports/nrf/common-hal/busio/UART.c:352
-#: ports/nrf/common-hal/busio/UART.c:360
+#: ports/nrf/common-hal/busio/UART.c:322 ports/nrf/common-hal/busio/UART.c:326
+#: ports/nrf/common-hal/busio/UART.c:331 ports/nrf/common-hal/busio/UART.c:336
+#: ports/nrf/common-hal/busio/UART.c:342 ports/nrf/common-hal/busio/UART.c:347
+#: ports/nrf/common-hal/busio/UART.c:352 ports/nrf/common-hal/busio/UART.c:356
+#: ports/nrf/common-hal/busio/UART.c:364
 msgid "busio.UART not available"
 msgstr ""
 
diff --git a/locale/fil.po b/locale/fil.po
index e77e31068..783fb6771 100644
--- a/locale/fil.po
+++ b/locale/fil.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-10-03 11:28+0700\n"
+"POT-Creation-Date: 2018-10-03 23:15+0700\n"
 "PO-Revision-Date: 2018-08-30 23:04-0700\n"
 "Last-Translator: Timothy <me@timothygarcia.ca>\n"
 "Language-Team: fil\n"
@@ -373,7 +373,7 @@ msgstr "Hindi sapat ang magagamit na pins"
 #: ports/atmel-samd/common-hal/busio/SPI.c:132
 #: ports/atmel-samd/common-hal/busio/UART.c:119
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c:45
-#: ports/nrf/common-hal/busio/I2C.c:77
+#: ports/nrf/common-hal/busio/I2C.c:81
 msgid "Invalid pins"
 msgstr "Mali ang pins"
 
@@ -709,17 +709,17 @@ msgstr "hindi alam na config param"
 msgid "AnalogOut functionality not supported"
 msgstr "Hindi supportado ang AnalogOut"
 
-#: ports/nrf/common-hal/busio/I2C.c:91
+#: ports/nrf/common-hal/busio/I2C.c:95
 #, fuzzy
 msgid "All I2C peripherals are in use"
 msgstr "Lahat ng timer ginagamit"
 
-#: ports/nrf/common-hal/busio/SPI.c:109
+#: ports/nrf/common-hal/busio/SPI.c:115
 #, fuzzy
 msgid "All SPI peripherals are in use"
 msgstr "Lahat ng timer ginagamit"
 
-#: ports/nrf/common-hal/busio/SPI.c:170
+#: ports/nrf/common-hal/busio/SPI.c:176
 msgid "Baud rate too high for this SPI peripheral"
 msgstr ""
 
@@ -738,11 +738,11 @@ msgstr "mali ang buffer length"
 msgid "Odd parity is not supported"
 msgstr "hindi sinusuportahan ang bytes > 8 bits"
 
-#: ports/nrf/common-hal/busio/UART.c:318 ports/nrf/common-hal/busio/UART.c:322
-#: ports/nrf/common-hal/busio/UART.c:327 ports/nrf/common-hal/busio/UART.c:332
-#: ports/nrf/common-hal/busio/UART.c:338 ports/nrf/common-hal/busio/UART.c:343
-#: ports/nrf/common-hal/busio/UART.c:348 ports/nrf/common-hal/busio/UART.c:352
-#: ports/nrf/common-hal/busio/UART.c:360
+#: ports/nrf/common-hal/busio/UART.c:322 ports/nrf/common-hal/busio/UART.c:326
+#: ports/nrf/common-hal/busio/UART.c:331 ports/nrf/common-hal/busio/UART.c:336
+#: ports/nrf/common-hal/busio/UART.c:342 ports/nrf/common-hal/busio/UART.c:347
+#: ports/nrf/common-hal/busio/UART.c:352 ports/nrf/common-hal/busio/UART.c:356
+#: ports/nrf/common-hal/busio/UART.c:364
 #, fuzzy
 msgid "busio.UART not available"
 msgstr "hindi pa implemented ang busio.UART"
diff --git a/locale/fr.po b/locale/fr.po
index bbabd8537..3af5066e6 100644
--- a/locale/fr.po
+++ b/locale/fr.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: 0.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-10-03 11:28+0700\n"
+"POT-Creation-Date: 2018-10-03 23:15+0700\n"
 "PO-Revision-Date: 2018-08-14 11:01+0200\n"
 "Last-Translator: Pierrick Couturier <arofarn@arofarn.info>\n"
 "Language-Team: fr\n"
@@ -368,7 +368,7 @@ msgstr "Pas assez de broches disponibles"
 #: ports/atmel-samd/common-hal/busio/SPI.c:132
 #: ports/atmel-samd/common-hal/busio/UART.c:119
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c:45
-#: ports/nrf/common-hal/busio/I2C.c:77
+#: ports/nrf/common-hal/busio/I2C.c:81
 msgid "Invalid pins"
 msgstr "Broche invalide"
 
@@ -705,17 +705,17 @@ msgstr "paramètre de config. inconnu"
 msgid "AnalogOut functionality not supported"
 msgstr "AnalogOut non supporté"
 
-#: ports/nrf/common-hal/busio/I2C.c:91
+#: ports/nrf/common-hal/busio/I2C.c:95
 #, fuzzy
 msgid "All I2C peripherals are in use"
 msgstr "Tous les timers sont utilisés"
 
-#: ports/nrf/common-hal/busio/SPI.c:109
+#: ports/nrf/common-hal/busio/SPI.c:115
 #, fuzzy
 msgid "All SPI peripherals are in use"
 msgstr "Tous les timers sont utilisés"
 
-#: ports/nrf/common-hal/busio/SPI.c:170
+#: ports/nrf/common-hal/busio/SPI.c:176
 msgid "Baud rate too high for this SPI peripheral"
 msgstr ""
 
@@ -734,11 +734,11 @@ msgstr "longueur de tampon invalide"
 msgid "Odd parity is not supported"
 msgstr "octets > 8 bits non supporté"
 
-#: ports/nrf/common-hal/busio/UART.c:318 ports/nrf/common-hal/busio/UART.c:322
-#: ports/nrf/common-hal/busio/UART.c:327 ports/nrf/common-hal/busio/UART.c:332
-#: ports/nrf/common-hal/busio/UART.c:338 ports/nrf/common-hal/busio/UART.c:343
-#: ports/nrf/common-hal/busio/UART.c:348 ports/nrf/common-hal/busio/UART.c:352
-#: ports/nrf/common-hal/busio/UART.c:360
+#: ports/nrf/common-hal/busio/UART.c:322 ports/nrf/common-hal/busio/UART.c:326
+#: ports/nrf/common-hal/busio/UART.c:331 ports/nrf/common-hal/busio/UART.c:336
+#: ports/nrf/common-hal/busio/UART.c:342 ports/nrf/common-hal/busio/UART.c:347
+#: ports/nrf/common-hal/busio/UART.c:352 ports/nrf/common-hal/busio/UART.c:356
+#: ports/nrf/common-hal/busio/UART.c:364
 #, fuzzy
 msgid "busio.UART not available"
 msgstr "busio.UART pas encore implémenté"
@@ -2426,9 +2426,9 @@ msgid "too many arguments provided with the given format"
 msgstr "trop d'arguments fournis avec ce format"
 
 #, fuzzy
-#~ msgid "palette must be displayio.Palette"
-#~ msgstr "la palette doit être longue de 32 octets"
-
-#, fuzzy
 #~ msgid "value_size must be power of two"
 #~ msgstr "'len' doit être un multiple de 4"
+
+#, fuzzy
+#~ msgid "palette must be displayio.Palette"
+#~ msgstr "la palette doit être longue de 32 octets"
diff --git a/locale/pt_BR.po b/locale/pt_BR.po
index 723c9bc8e..d6b283c9f 100644
--- a/locale/pt_BR.po
+++ b/locale/pt_BR.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-10-02 01:19-0300\n"
+"POT-Creation-Date: 2018-10-03 23:15+0700\n"
 "PO-Revision-Date: 2018-10-02 21:14-0000\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -361,7 +361,7 @@ msgstr "Não há pinos suficientes disponíveis"
 #: ports/atmel-samd/common-hal/busio/SPI.c:132
 #: ports/atmel-samd/common-hal/busio/UART.c:119
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c:45
-#: ports/nrf/common-hal/busio/I2C.c:77
+#: ports/nrf/common-hal/busio/I2C.c:81
 msgid "Invalid pins"
 msgstr "Pinos inválidos"
 
@@ -378,10 +378,12 @@ msgid "bytes > 8 bits not supported"
 msgstr "bytes > 8 bits não suportado"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:72
+#: ports/nrf/common-hal/busio/UART.c:82
 msgid "tx and rx cannot both be None"
 msgstr "TX e RX não podem ser ambos"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:145
+#: ports/nrf/common-hal/busio/UART.c:115
 msgid "Failed to allocate RX buffer"
 msgstr "Falha ao alocar buffer RX"
 
@@ -390,10 +392,12 @@ msgid "Could not initialize UART"
 msgstr "Não foi possível inicializar o UART"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:240
+#: ports/nrf/common-hal/busio/UART.c:149
 msgid "No RX pin"
 msgstr "Nenhum pino RX"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:294
+#: ports/nrf/common-hal/busio/UART.c:195
 msgid "No TX pin"
 msgstr "Nenhum pino TX"
 
@@ -690,24 +694,39 @@ msgstr ""
 msgid "AnalogOut functionality not supported"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/I2C.c:91
+#: ports/nrf/common-hal/busio/I2C.c:95
 msgid "All I2C peripherals are in use"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/SPI.c:109
+#: ports/nrf/common-hal/busio/SPI.c:115
 msgid "All SPI peripherals are in use"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/SPI.c:170
+#: ports/nrf/common-hal/busio/SPI.c:176
 msgid "Baud rate too high for this SPI peripheral"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:43 ports/nrf/common-hal/busio/UART.c:47
-#: ports/nrf/common-hal/busio/UART.c:51 ports/nrf/common-hal/busio/UART.c:60
-#: ports/nrf/common-hal/busio/UART.c:66 ports/nrf/common-hal/busio/UART.c:71
-#: ports/nrf/common-hal/busio/UART.c:76 ports/nrf/common-hal/busio/UART.c:81
-#: ports/nrf/common-hal/busio/UART.c:86 ports/nrf/common-hal/busio/UART.c:90
-msgid "busio.UART not yet implemented"
+#: ports/nrf/common-hal/busio/UART.c:48
+#, c-format
+msgid "error = 0x%08lX"
+msgstr ""
+
+#: ports/nrf/common-hal/busio/UART.c:86
+#, fuzzy
+msgid "Invalid buffer size"
+msgstr "Arquivo inválido"
+
+#: ports/nrf/common-hal/busio/UART.c:90
+#, fuzzy
+msgid "Odd parity is not supported"
+msgstr "I2C operação não suportada"
+
+#: ports/nrf/common-hal/busio/UART.c:322 ports/nrf/common-hal/busio/UART.c:326
+#: ports/nrf/common-hal/busio/UART.c:331 ports/nrf/common-hal/busio/UART.c:336
+#: ports/nrf/common-hal/busio/UART.c:342 ports/nrf/common-hal/busio/UART.c:347
+#: ports/nrf/common-hal/busio/UART.c:352 ports/nrf/common-hal/busio/UART.c:356
+#: ports/nrf/common-hal/busio/UART.c:364
+msgid "busio.UART not available"
 msgstr ""
 
 #: ports/nrf/common-hal/microcontroller/Processor.c:49
@@ -2254,7 +2273,8 @@ msgstr "Limite deve estar no alcance de 0-65536"
 #: shared-bindings/util.c:38
 msgid ""
 "Object has been deinitialized and can no longer be used. Create a new object."
-msgstr "Objeto foi desinicializado e não pode ser mais usaado. Crie um novo objeto."
+msgstr ""
+"Objeto foi desinicializado e não pode ser mais usaado. Crie um novo objeto."
 
 #: shared-module/audioio/WaveFile.c:61
 msgid "Invalid wave file"