Merge pull request #2 from adafruit/master

Master

1 files changed, 164 insertions, 0 deletions

diff --git a/shared-module/board/__init__.c b/shared-module/board/__init__.c
new file mode 100644
index 000000000..0fbf916cd
--- /dev/null
+++ b/shared-module/board/__init__.c
@@ -0,0 +1,164 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2018 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "shared-bindings/microcontroller/Pin.h"
+#include "supervisor/shared/translate.h"
+#include "mpconfigboard.h"
+#include "py/runtime.h"
+
+#if CIRCUITPY_BUSIO
+#include "shared-bindings/busio/I2C.h"
+#include "shared-bindings/busio/SPI.h"
+#include "shared-bindings/busio/UART.h"
+#endif
+
+#if CIRCUITPY_DISPLAYIO
+#include "shared-module/displayio/__init__.h"
+#endif
+
+#if BOARD_I2C
+// Statically allocate the I2C object so it can live past the end of the heap and into the next VM.
+// That way it can be used by built-in I2CDisplay displays and be accessible through board.I2C().
+STATIC busio_i2c_obj_t i2c_obj;
+STATIC mp_obj_t i2c_singleton = NULL;
+
+mp_obj_t common_hal_board_get_i2c(void) {
+    return i2c_singleton;
+}
+
+mp_obj_t common_hal_board_create_i2c(void) {
+    if (i2c_singleton != NULL) {
+        return i2c_singleton;
+    }
+    busio_i2c_obj_t *self = &i2c_obj;
+    self->base.type = &busio_i2c_type;
+
+    common_hal_busio_i2c_construct(self, DEFAULT_I2C_BUS_SCL, DEFAULT_I2C_BUS_SDA, 400000, 0);
+    i2c_singleton = (mp_obj_t)self;
+    return i2c_singleton;
+}
+#endif
+
+
+#if BOARD_SPI
+// Statically allocate the SPI object so it can live past the end of the heap and into the next VM.
+// That way it can be used by built-in FourWire displays and be accessible through board.SPI().
+STATIC busio_spi_obj_t spi_obj;
+STATIC mp_obj_t spi_singleton = NULL;
+
+mp_obj_t common_hal_board_get_spi(void) {
+    return spi_singleton;
+}
+
+mp_obj_t common_hal_board_create_spi(void) {
+    if (spi_singleton != NULL) {
+        return spi_singleton;
+    }
+    busio_spi_obj_t *self = &spi_obj;
+    self->base.type = &busio_spi_type;
+
+    const mcu_pin_obj_t* clock = MP_OBJ_TO_PTR(DEFAULT_SPI_BUS_SCK);
+    const mcu_pin_obj_t* mosi = MP_OBJ_TO_PTR(DEFAULT_SPI_BUS_MOSI);
+    const mcu_pin_obj_t* miso = MP_OBJ_TO_PTR(DEFAULT_SPI_BUS_MISO);
+    common_hal_busio_spi_construct(self, clock, mosi, miso);
+    spi_singleton = (mp_obj_t)self;
+    return spi_singleton;
+}
+#endif
+
+#if BOARD_UART
+mp_obj_t common_hal_board_get_uart(void) {
+    return MP_STATE_VM(shared_uart_bus);
+}
+
+mp_obj_t common_hal_board_create_uart(void) {
+    busio_uart_obj_t *self = m_new_ll_obj(busio_uart_obj_t);
+    self->base.type = &busio_uart_type;
+
+    const mcu_pin_obj_t* rx = MP_OBJ_TO_PTR(DEFAULT_UART_BUS_RX);
+    const mcu_pin_obj_t* tx = MP_OBJ_TO_PTR(DEFAULT_UART_BUS_TX);
+#ifdef DEFAULT_UART_BUS_RTS
+    const mcu_pin_obj_t* rts = MP_OBJ_TO_PTR(DEFAULT_UART_BUS_RTS);
+#else
+    const mcu_pin_obj_t* rts = NULL;
+#endif
+#ifdef DEFAULT_UART_BUS_CTS
+    const mcu_pin_obj_t* cts = MP_OBJ_TO_PTR(DEFAULT_UART_BUS_CTS);
+#else
+    const mcu_pin_obj_t* cts = NULL;
+#endif
+#ifdef DEFAULT_UART_IS_RS485
+    const mcu_pin_obj_t* rs485_dir = MP_OBJ_TO_PTR(DEFAULT_UART_BUS_RS485DIR);
+#ifdef DEFAULT_UART_RS485_INVERT
+    const bool rs485_invert = true;
+#else
+    const bool rs485_invert = false;
+#endif
+#else
+    const mcu_pin_obj_t* rs485_dir = NULL;
+    const bool rs485_invert = false;
+#endif
+
+    common_hal_busio_uart_construct(self, tx, rx, rts, cts, rs485_dir, rs485_invert,
+                                    9600, 8, PARITY_NONE, 1, 1.0f, 64, NULL, false);
+    MP_STATE_VM(shared_uart_bus) = MP_OBJ_FROM_PTR(self);
+    return MP_STATE_VM(shared_uart_bus);
+}
+#endif
+
+void reset_board_busses(void) {
+#if BOARD_I2C
+    bool display_using_i2c = false;
+    #if CIRCUITPY_DISPLAYIO
+    for (uint8_t i = 0; i < CIRCUITPY_DISPLAY_LIMIT; i++) {
+        if (displays[i].i2cdisplay_bus.bus == i2c_singleton) {
+            display_using_i2c = true;
+            break;
+        }
+    }
+    #endif
+    if (!display_using_i2c) {
+        i2c_singleton = NULL;
+    }
+#endif
+#if BOARD_SPI
+    bool display_using_spi = false;
+    #if CIRCUITPY_DISPLAYIO
+    for (uint8_t i = 0; i < CIRCUITPY_DISPLAY_LIMIT; i++) {
+        if (displays[i].fourwire_bus.bus == spi_singleton) {
+            display_using_spi = true;
+            break;
+        }
+    }
+    #endif
+    if (!display_using_spi) {
+        spi_singleton = NULL;
+    }
+#endif
+#if BOARD_UART
+    MP_STATE_VM(shared_uart_bus) = NULL;
+#endif
+}