diff options
| -rw-r--r-- | .github/workflows/build.yml | 1 | ||||
| -rw-r--r-- | ports/nrf/boards/pitaya_go/README.md | 40 | ||||
| -rw-r--r-- | ports/nrf/boards/pitaya_go/board.c | 38 | ||||
| -rw-r--r-- | ports/nrf/boards/pitaya_go/mpconfigboard.h | 43 | ||||
| -rw-r--r-- | ports/nrf/boards/pitaya_go/mpconfigboard.mk | 11 | ||||
| -rw-r--r-- | ports/nrf/boards/pitaya_go/pins.c | 64 |
6 files changed, 197 insertions, 0 deletions
diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 6cd6289b3..3dda76db4 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -216,6 +216,7 @@ jobs: - "pewpew10" - "pewpew_m4" - "pirkey_m0" + - "pitaya_go" - "pyb_nano_v2" - "pybadge" - "pybadge_airlift" diff --git a/ports/nrf/boards/pitaya_go/README.md b/ports/nrf/boards/pitaya_go/README.md new file mode 100644 index 000000000..a58b75289 --- /dev/null +++ b/ports/nrf/boards/pitaya_go/README.md @@ -0,0 +1,40 @@ +# Makerdiary Pitaya Go + +>Pitaya Go is a compact and versatile development platform for IoT solutions, +combining the Nordic's high-end multiprotocol SoC nRF52840 and the Microchip's +extreme low power Wi-Fi® network controller ATWINC1500B. It offers a complete +solution for wireless connectivity with IEEE 802.11 b/g/n, Bluetooth 5, Thread +and Zigbee, that is specifically designed for the IoT. +Pitaya Go features a Battery Charger with power path management, 64Mbit ultra +low power QSPI Flash memory, additional NFC-A Tag PCB Antenna, user +programmable RGB LED and Buttons, reversible USB-C Connector and easily +expandable Header Sockets. All these features above make this board an ideal +choice for the next IoT project. + +from [Makerdiary](https://store.makerdiary.com/products/pitaya-go) + + +## Installing CircuitPython submodules + +Before you can build, you will need to run the following commands once, which +will install the submodules that are part of the CircuitPython ecosystem, and +build the `mpy-cross` tool: + +``` +$ cd circuitpython +$ git submodule update --init +$ make -C mpy-cross +``` + + +## Building +```sh +$ cd ports/nrf +$ make BOARD=pitaya_go SD=s140 -V=1 -j4 +``` + +# Flashing CircuitPython + +The Pitaya Go has a pre-programmed bootloader which can be used to program the +Pitaya Go. Follow [the guide - How to Program Pitaya Go](https://wiki.makerdiary.com/pitaya-go/programming/) +to flash the CircuitPython firmware. diff --git a/ports/nrf/boards/pitaya_go/board.c b/ports/nrf/boards/pitaya_go/board.c new file mode 100644 index 000000000..4421970ee --- /dev/null +++ b/ports/nrf/boards/pitaya_go/board.c @@ -0,0 +1,38 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" + +void board_init(void) { +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { + +} diff --git a/ports/nrf/boards/pitaya_go/mpconfigboard.h b/ports/nrf/boards/pitaya_go/mpconfigboard.h new file mode 100644 index 000000000..7f9eff716 --- /dev/null +++ b/ports/nrf/boards/pitaya_go/mpconfigboard.h @@ -0,0 +1,43 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2016 Glenn Ruben Bakke + * Copyright (c) 2018 Dan Halbert for Adafruit Industries + * Copyright (c) 2020 Yihui Xiong + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "nrfx/hal/nrf_gpio.h" + +#define MAKERDIARYPITAYAGO + +#define MICROPY_HW_BOARD_NAME "Makerdiary Pitaya Go" +#define MICROPY_HW_MCU_NAME "nRF52840" + +#define MICROPY_QSPI_DATA0 NRF_GPIO_PIN_MAP(1, 6) +#define MICROPY_QSPI_DATA1 NRF_GPIO_PIN_MAP(1, 1) +#define MICROPY_QSPI_DATA2 NRF_GPIO_PIN_MAP(1, 5) +#define MICROPY_QSPI_DATA3 NRF_GPIO_PIN_MAP(1, 2) +#define MICROPY_QSPI_SCK NRF_GPIO_PIN_MAP(1, 4) +#define MICROPY_QSPI_CS NRF_GPIO_PIN_MAP(1, 3) + +#define BOARD_HAS_CRYSTAL 1 diff --git a/ports/nrf/boards/pitaya_go/mpconfigboard.mk b/ports/nrf/boards/pitaya_go/mpconfigboard.mk new file mode 100644 index 000000000..247ddd8ac --- /dev/null +++ b/ports/nrf/boards/pitaya_go/mpconfigboard.mk @@ -0,0 +1,11 @@ +# Using Nordic's VID - https://devzone.nordicsemi.com/f/nordic-q-a/50638/usb-pid-for-nrf52840 +USB_VID = 0x1915 +USB_PID = 0xb001 +USB_PRODUCT = "Pitaya Go" +USB_MANUFACTURER = "Makerdiary" + +MCU_CHIP = nrf52840 + +QSPI_FLASH_FILESYSTEM = 1 +EXTERNAL_FLASH_DEVICE_COUNT = 1 +EXTERNAL_FLASH_DEVICES = "MX25R6435F" diff --git a/ports/nrf/boards/pitaya_go/pins.c b/ports/nrf/boards/pitaya_go/pins.c new file mode 100644 index 000000000..92411581b --- /dev/null +++ b/ports/nrf/boards/pitaya_go/pins.c @@ -0,0 +1,64 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_module_globals_table[] = { + { MP_ROM_QSTR(MP_QSTR_AIN0), MP_ROM_PTR(&pin_P0_02) }, + { MP_ROM_QSTR(MP_QSTR_AIN1), MP_ROM_PTR(&pin_P0_03) }, + { MP_ROM_QSTR(MP_QSTR_AIN2), MP_ROM_PTR(&pin_P0_04) }, + { MP_ROM_QSTR(MP_QSTR_AIN3), MP_ROM_PTR(&pin_P0_05) }, + { MP_ROM_QSTR(MP_QSTR_AIN4), MP_ROM_PTR(&pin_P0_28) }, + { MP_ROM_QSTR(MP_QSTR_AIN5), MP_ROM_PTR(&pin_P0_29) }, + { MP_ROM_QSTR(MP_QSTR_AIN6), MP_ROM_PTR(&pin_P0_30) }, + { MP_ROM_QSTR(MP_QSTR_AIN7), MP_ROM_PTR(&pin_P0_31) }, + + { MP_ROM_QSTR(MP_QSTR_AREF), MP_ROM_PTR(&pin_P0_04) }, + { MP_ROM_QSTR(MP_QSTR_VDIV), MP_ROM_PTR(&pin_P0_05) }, + + { MP_ROM_QSTR(MP_QSTR_NFC1), MP_ROM_PTR(&pin_P0_09) }, + { MP_ROM_QSTR(MP_QSTR_NFC2), MP_ROM_PTR(&pin_P0_10) }, + + { MP_ROM_QSTR(MP_QSTR_P2), MP_ROM_PTR(&pin_P0_02) }, + { MP_ROM_QSTR(MP_QSTR_P3), MP_ROM_PTR(&pin_P0_03) }, + { MP_ROM_QSTR(MP_QSTR_P4), MP_ROM_PTR(&pin_P0_04) }, + { MP_ROM_QSTR(MP_QSTR_P5), MP_ROM_PTR(&pin_P0_05) }, + { MP_ROM_QSTR(MP_QSTR_P6), MP_ROM_PTR(&pin_P0_06) }, + { MP_ROM_QSTR(MP_QSTR_P7), MP_ROM_PTR(&pin_P0_07) }, + { MP_ROM_QSTR(MP_QSTR_P8), MP_ROM_PTR(&pin_P0_08) }, + { MP_ROM_QSTR(MP_QSTR_P9), MP_ROM_PTR(&pin_P0_09) }, + { MP_ROM_QSTR(MP_QSTR_P10), MP_ROM_PTR(&pin_P0_10) }, + { MP_ROM_QSTR(MP_QSTR_P11), MP_ROM_PTR(&pin_P0_11) }, + { MP_ROM_QSTR(MP_QSTR_P12), MP_ROM_PTR(&pin_P0_12) }, + { MP_ROM_QSTR(MP_QSTR_P13), MP_ROM_PTR(&pin_P0_13) }, + { MP_ROM_QSTR(MP_QSTR_P14), MP_ROM_PTR(&pin_P0_14) }, + { MP_ROM_QSTR(MP_QSTR_P15), MP_ROM_PTR(&pin_P0_15) }, + { MP_ROM_QSTR(MP_QSTR_P16), MP_ROM_PTR(&pin_P0_16) }, + { MP_ROM_QSTR(MP_QSTR_P17), MP_ROM_PTR(&pin_P0_17) }, + { MP_ROM_QSTR(MP_QSTR_P18), MP_ROM_PTR(&pin_P0_18) }, + { MP_ROM_QSTR(MP_QSTR_P19), MP_ROM_PTR(&pin_P0_19) }, + { MP_ROM_QSTR(MP_QSTR_P20), MP_ROM_PTR(&pin_P0_20) }, + { MP_ROM_QSTR(MP_QSTR_P21), MP_ROM_PTR(&pin_P0_21) }, + { MP_ROM_QSTR(MP_QSTR_P22), MP_ROM_PTR(&pin_P0_22) }, + { MP_ROM_QSTR(MP_QSTR_P23), MP_ROM_PTR(&pin_P0_23) }, + { MP_ROM_QSTR(MP_QSTR_P24), MP_ROM_PTR(&pin_P0_24) }, + { MP_ROM_QSTR(MP_QSTR_P25), MP_ROM_PTR(&pin_P0_25) }, + { MP_ROM_QSTR(MP_QSTR_P26), MP_ROM_PTR(&pin_P0_26) }, + { MP_ROM_QSTR(MP_QSTR_P27), MP_ROM_PTR(&pin_P0_27) }, + { MP_ROM_QSTR(MP_QSTR_P28), MP_ROM_PTR(&pin_P0_28) }, + { MP_ROM_QSTR(MP_QSTR_P29), MP_ROM_PTR(&pin_P0_29) }, + { MP_ROM_QSTR(MP_QSTR_P30), MP_ROM_PTR(&pin_P0_30) }, + { MP_ROM_QSTR(MP_QSTR_P31), MP_ROM_PTR(&pin_P0_31) }, + + { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_P1_04) }, + { MP_ROM_QSTR(MP_QSTR_CSN), MP_ROM_PTR(&pin_P1_03) }, + { MP_ROM_QSTR(MP_QSTR_IO0), MP_ROM_PTR(&pin_P1_06) }, + { MP_ROM_QSTR(MP_QSTR_IO1), MP_ROM_PTR(&pin_P1_01) }, + { MP_ROM_QSTR(MP_QSTR_IO2), MP_ROM_PTR(&pin_P1_05) }, + { MP_ROM_QSTR(MP_QSTR_IO3), MP_ROM_PTR(&pin_P1_02) }, + + { MP_ROM_QSTR(MP_QSTR_LED_RED), MP_ROM_PTR(&pin_P0_10) }, + { MP_ROM_QSTR(MP_QSTR_LED_GREEN), MP_ROM_PTR(&pin_P0_11) }, + { MP_ROM_QSTR(MP_QSTR_LED_BLUE), MP_ROM_PTR(&pin_P0_12) }, + + { MP_ROM_QSTR(MP_QSTR_USR_BTN), MP_ROM_PTR(&pin_P1_00) }, +}; + +MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table); |