diff options
| -rwxr-xr-x | ports/stm32f4/Makefile | 40 | ||||
| -rw-r--r-- | ports/stm32f4/boards/stm32f411_disco/mpconfigboard.mk | 4 | ||||
| -rw-r--r-- | ports/stm32f4/boards/stm32f412g_disco/mpconfigboard.mk | 4 | ||||
| -rw-r--r-- | ports/stm32f4/mpconfigport.mk | 6 | ||||
| -rw-r--r-- | ports/stm32f4/supervisor/port.c | 330 | ||||
| -rw-r--r-- | ports/stm32f4/supervisor/port_411.c | 246 | ||||
| -rw-r--r-- | ports/stm32f4/supervisor/port_412.c | 328 | ||||
| -rw-r--r-- | supervisor/supervisor.mk | 1 |
8 files changed, 483 insertions, 476 deletions
diff --git a/ports/stm32f4/Makefile b/ports/stm32f4/Makefile index c96b3201a..d91b4aa55 100755 --- a/ports/stm32f4/Makefile +++ b/ports/stm32f4/Makefile @@ -87,16 +87,22 @@ else ### CFLAGS += -flto endif -# C defines -#C_DEFS = \ -#-DUSE_FULL_LL_DRIVER \ -#-DUSE_HAL_DRIVER \ -#-DSTM32F412Zx \ +# C defines and other board specifics +ifeq ($(MCU_SUB_VARIANT), stm32f412zx) +C_DEFS = \ + -DUSE_FULL_LL_DRIVER \ + -DUSE_HAL_DRIVER \ + -DSTM32F412Zx +endif -# C defines +ifeq ($(MCU_SUB_VARIANT), stm32f411xe) C_DEFS = \ -DUSE_HAL_DRIVER \ - -DSTM32F411xE \ + -DSTM32F411xE +CIRCUITPY_BOARD = 0 +CIRCUITPY_DIGITALIO = 0 +CIRCUITPY_MICROCONTROLLER = 0 +endif #TODO: Add ASM Flags? -Werror CFLAGS += $(INC) -Wall -std=gnu11 -nostdlib $(BASE_CFLAGS) $(C_DEFS) $(CFLAGS_MOD) $(COPT) @@ -118,8 +124,6 @@ CFLAGS += \ # TODO: check this CFLAGS += -D__START=main -#TODO: add LD file? - LDFLAGS = $(CFLAGS) -fshort-enums -Wl,-nostdlib -Wl,-T,$(LD_FILE) -Wl,-Map=$@.map -Wl,-cref -Wl,-gc-sections -specs=nano.specs LIBS := -lgcc -lc @@ -131,7 +135,6 @@ LIBS += -lm endif # TinyUSB defines -# TODO: make this stm32 CFLAGS += -DCFG_TUSB_MCU=OPT_MCU_STM32F4 -DCFG_TUD_CDC_RX_BUFSIZE=1024 -DCFG_TUD_CDC_TX_BUFSIZE=1024 -DCFG_TUD_MSC_BUFSIZE=4096 -DCFG_TUD_MIDI_RX_BUFSIZE=128 -DCFG_TUD_MIDI_TX_BUFSIZE=128 @@ -194,18 +197,19 @@ SRC_C += \ lib/utils/pyexec.c \ lib/utils/stdout_helpers.c \ lib/utils/sys_stdio_mphal.c \ - supervisor/shared/memory.c \ - lib/tinyusb/src/portable/st/stm32f4/dcd_stm32f4.c + supervisor/shared/memory.c + +ifneq ($(USB),FALSE) +SRC_C += lib/tinyusb/src/portable/st/stm32f4/dcd_stm32f4.c +endif -# peripherals/stm32f4/stm32f412zg/pins.c \ +ifeq ($(MCU_SUB_VARIANT), stm32f412zx) +SRC_C += peripherals/stm32f4/stm32f412zg/pins.c +endif SRC_S = \ supervisor/cpu.s \ - boards/startup_stm32f411xe.s -# boards/startup_stm32f412zx.s -# boards/startup_stm32f411xe.s - -#boards/startup_stm32f412zx.s + boards/startup_$(MCU_SUB_VARIANT).s SRC_COMMON_HAL_EXPANDED = $(addprefix shared-bindings/, $(SRC_COMMON_HAL)) \ $(addprefix shared-bindings/, $(SRC_BINDINGS_ENUMS)) \ diff --git a/ports/stm32f4/boards/stm32f411_disco/mpconfigboard.mk b/ports/stm32f4/boards/stm32f411_disco/mpconfigboard.mk index 0c24fe292..523628504 100644 --- a/ports/stm32f4/boards/stm32f411_disco/mpconfigboard.mk +++ b/ports/stm32f4/boards/stm32f411_disco/mpconfigboard.mk @@ -3,7 +3,9 @@ USB_PID = 0x802A USB_PRODUCT = "A glorious potato" USB_MANUFACTURER = "Adafruit Industries LLC" -MCU_SERIES = f4 +MCU_SERIES = m4 +MCU_VARIANT = stm32f4 +MCU_SUB_VARIANT = stm32f411xe CMSIS_MCU = STM32F411xE LD_FILE = boards/STM32F411VETx_FLASH.ld TEXT0_ADDR = 0x08000000 diff --git a/ports/stm32f4/boards/stm32f412g_disco/mpconfigboard.mk b/ports/stm32f4/boards/stm32f412g_disco/mpconfigboard.mk index 406ea762c..9e8711c36 100644 --- a/ports/stm32f4/boards/stm32f412g_disco/mpconfigboard.mk +++ b/ports/stm32f4/boards/stm32f412g_disco/mpconfigboard.mk @@ -8,7 +8,9 @@ USB_MANUFACTURER = "Adafruit Industries LLC" #USB_PRODUCT = "STM32 Human Interface Potato" #USB_MANUFACTURER = "STMicroelectronics" -MCU_SERIES = f4 +MCU_SERIES = m4 +MCU_VARIANT = stm32f4 +MCU_SUB_VARIANT = stm32f412zx CMSIS_MCU = STM32F412xG LD_FILE = boards/STM32F412ZGTx_FLASH.ld TEXT0_ADDR = 0x08000000 diff --git a/ports/stm32f4/mpconfigport.mk b/ports/stm32f4/mpconfigport.mk index aec0996be..de8cec321 100644 --- a/ports/stm32f4/mpconfigport.mk +++ b/ports/stm32f4/mpconfigport.mk @@ -34,16 +34,16 @@ CIRCUITPY_AUDIOBUSIO = 0 CIRCUITPY_AUDIOIO = 0 CIRCUITPY_BITBANGIO = 0 CIRCUITPY_BLEIO = 0 -CIRCUITPY_BOARD = 0 +CIRCUITPY_BOARD = 1 CIRCUITPY_BUSIO = 0 -CIRCUITPY_DIGITALIO = 0 +CIRCUITPY_DIGITALIO = 1 CIRCUITPY_DISPLAYIO = 0 CIRCUITPY_FREQUENCYIO = 0 CIRCUITPY_GAMEPAD = 0 CIRCUITPY_GAMEPADSHIFT = 0 CIRCUITPY_I2CSLAVE = 0 CIRCUITPY_MATH = 0 -CIRCUITPY_MICROCONTROLLER = 0 +CIRCUITPY_MICROCONTROLLER = 1 CIRCUITPY_NEOPIXEL_WRITE = 0 CIRCUITPY_NETWORK = 0 CIRCUITPY_NVM = 0 diff --git a/ports/stm32f4/supervisor/port.c b/ports/stm32f4/supervisor/port.c index 8a106c477..0a0e08fdf 100644 --- a/ports/stm32f4/supervisor/port.c +++ b/ports/stm32f4/supervisor/port.c @@ -32,74 +32,175 @@ //#include "shared-bindings/rtc/__init__.h" #include "stm32f4xx_hal.h" -#define DATA_Ready_Pin GPIO_PIN_2 -#define DATA_Ready_GPIO_Port GPIOE -#define CS_I2C_SPI_Pin GPIO_PIN_3 -#define CS_I2C_SPI_GPIO_Port GPIOE -#define INT1_Pin GPIO_PIN_4 -#define INT1_GPIO_Port GPIOE -#define INT2_Pin GPIO_PIN_5 -#define INT2_GPIO_Port GPIOE -#define PC14_OSC32_IN_Pin GPIO_PIN_14 -#define PC14_OSC32_IN_GPIO_Port GPIOC -#define PC15_OSC32_OUT_Pin GPIO_PIN_15 -#define PC15_OSC32_OUT_GPIO_Port GPIOC -#define PH0_OSC_IN_Pin GPIO_PIN_0 -#define PH0_OSC_IN_GPIO_Port GPIOH -#define PH1_OSC_OUT_Pin GPIO_PIN_1 -#define PH1_OSC_OUT_GPIO_Port GPIOH -#define OTG_FS_PowerSwitchOn_Pin GPIO_PIN_0 -#define OTG_FS_PowerSwitchOn_GPIO_Port GPIOC -#define PDM_OUT_Pin GPIO_PIN_3 -#define PDM_OUT_GPIO_Port GPIOC -#define I2S3_WS_Pin GPIO_PIN_4 -#define I2S3_WS_GPIO_Port GPIOA -#define SPI1_SCK_Pin GPIO_PIN_5 -#define SPI1_SCK_GPIO_Port GPIOA -#define SPI1_MISO_Pin GPIO_PIN_6 -#define SPI1_MISO_GPIO_Port GPIOA -#define SPI1_MOSI_Pin GPIO_PIN_7 -#define SPI1_MOSI_GPIO_Port GPIOA -#define CLK_IN_Pin GPIO_PIN_10 -#define CLK_IN_GPIO_Port GPIOB -#define LD4_Pin GPIO_PIN_12 -#define LD4_GPIO_Port GPIOD -#define LD3_Pin GPIO_PIN_13 -#define LD3_GPIO_Port GPIOD -#define LD5_Pin GPIO_PIN_14 -#define LD5_GPIO_Port GPIOD -#define LD6_Pin GPIO_PIN_15 -#define LD6_GPIO_Port GPIOD -#define I2S3_MCK_Pin GPIO_PIN_7 -#define I2S3_MCK_GPIO_Port GPIOC -#define VBUS_FS_Pin GPIO_PIN_9 -#define VBUS_FS_GPIO_Port GPIOA -#define OTG_FS_ID_Pin GPIO_PIN_10 -#define OTG_FS_ID_GPIO_Port GPIOA -#define OTG_FS_DM_Pin GPIO_PIN_11 -#define OTG_FS_DM_GPIO_Port GPIOA -#define OTG_FS_DP_Pin GPIO_PIN_12 -#define OTG_FS_DP_GPIO_Port GPIOA + +#define LED3_Pin GPIO_PIN_2 +#define LED3_GPIO_Port GPIOE +#define LED4_Pin GPIO_PIN_3 +#define LED4_GPIO_Port GPIOE +#define DFSDM_DATIN3_Pin GPIO_PIN_4 +#define DFSDM_DATIN3_GPIO_Port GPIOE +#define A0_Pin GPIO_PIN_0 +#define A0_GPIO_Port GPIOF +#define LCD_BLCTRL_Pin GPIO_PIN_5 +#define LCD_BLCTRL_GPIO_Port GPIOF +#define QSPI_BK1_IO3_Pin GPIO_PIN_6 +#define QSPI_BK1_IO3_GPIO_Port GPIOF +#define QSPI_BK1_IO2_Pin GPIO_PIN_7 +#define QSPI_BK1_IO2_GPIO_Port GPIOF +#define QSPI_BK1_IO0_Pin GPIO_PIN_8 +#define QSPI_BK1_IO0_GPIO_Port GPIOF +#define QSPI_BK1_IO1_Pin GPIO_PIN_9 +#define QSPI_BK1_IO1_GPIO_Port GPIOF +#define STLK_MCO_Pin GPIO_PIN_0 +#define STLK_MCO_GPIO_Port GPIOH +#define DFSDM_CKOUT_Pin GPIO_PIN_2 +#define DFSDM_CKOUT_GPIO_Port GPIOC +#define JOY_SEL_Pin GPIO_PIN_0 +#define JOY_SEL_GPIO_Port GPIOA +#define STLINK_RX_Pin GPIO_PIN_2 +#define STLINK_RX_GPIO_Port GPIOA +#define STLINK_TX_Pin GPIO_PIN_3 +#define STLINK_TX_GPIO_Port GPIOA +#define CODEC_I2S3_WS_Pin GPIO_PIN_4 +#define CODEC_I2S3_WS_GPIO_Port GPIOA +#define DFSDM_DATIN0_Pin GPIO_PIN_1 +#define DFSDM_DATIN0_GPIO_Port GPIOB +#define QSPI_CLK_Pin GPIO_PIN_2 +#define QSPI_CLK_GPIO_Port GPIOB +#define EXT_RESET_Pin GPIO_PIN_11 +#define EXT_RESET_GPIO_Port GPIOF +#define CTP_RST_Pin GPIO_PIN_12 +#define CTP_RST_GPIO_Port GPIOF +#define JOY_RIGHT_Pin GPIO_PIN_14 +#define JOY_RIGHT_GPIO_Port GPIOF +#define JOY_LEFT_Pin GPIO_PIN_15 +#define JOY_LEFT_GPIO_Port GPIOF +#define JOY_UP_Pin GPIO_PIN_0 +#define JOY_UP_GPIO_Port GPIOG +#define JOY_DOWN_Pin GPIO_PIN_1 +#define JOY_DOWN_GPIO_Port GPIOG +#define D4_Pin GPIO_PIN_7 +#define D4_GPIO_Port GPIOE +#define D5_Pin GPIO_PIN_8 +#define D5_GPIO_Port GPIOE +#define D6_Pin GPIO_PIN_9 +#define D6_GPIO_Port GPIOE +#define D7_Pin GPIO_PIN_10 +#define D7_GPIO_Port GPIOE +#define D8_Pin GPIO_PIN_11 +#define D8_GPIO_Port GPIOE +#define D9_Pin GPIO_PIN_12 +#define D9_GPIO_Port GPIOE +#define D10_Pin GPIO_PIN_13 +#define D10_GPIO_Port GPIOE +#define D11_Pin GPIO_PIN_14 +#define D11_GPIO_Port GPIOE +#define D12_Pin GPIO_PIN_15 +#define D12_GPIO_Port GPIOE +#define I2C2_SCL_Pin GPIO_PIN_10 +#define I2C2_SCL_GPIO_Port GPIOB +#define M2_CKIN_Pin GPIO_PIN_11 +#define M2_CKIN_GPIO_Port GPIOB +#define CODEC_I2S3_SCK_Pin GPIO_PIN_12 +#define CODEC_I2S3_SCK_GPIO_Port GPIOB +#define D13_Pin GPIO_PIN_8 +#define D13_GPIO_Port GPIOD +#define D14_Pin GPIO_PIN_9 +#define D14_GPIO_Port GPIOD +#define D15_Pin GPIO_PIN_10 +#define D15_GPIO_Port GPIOD +#define LCD_RESET_Pin GPIO_PIN_11 +#define LCD_RESET_GPIO_Port GPIOD +#define D0_Pin GPIO_PIN_14 +#define D0_GPIO_Port GPIOD +#define D1_Pin GPIO_PIN_15 +#define D1_GPIO_Port GPIOD +#define CODEC_INT_Pin GPIO_PIN_2 +#define CODEC_INT_GPIO_Port GPIOG +#define LCD_TE_Pin GPIO_PIN_4 +#define LCD_TE_GPIO_Port GPIOG +#define CTP_INT_Pin GPIO_PIN_5 +#define CTP_INT_GPIO_Port GPIOG +#define QSPI_BK1_NCS_Pin GPIO_PIN_6 +#define QSPI_BK1_NCS_GPIO_Port GPIOG +#define USB_OTGFS_OVRCR_Pin GPIO_PIN_7 +#define USB_OTGFS_OVRCR_GPIO_Port GPIOG +#define USB_OTGFS_PPWR_EN_Pin GPIO_PIN_8 +#define USB_OTGFS_PPWR_EN_GPIO_Port GPIOG +#define CODEC_I2S3_MCK_Pin GPIO_PIN_7 +#define CODEC_I2S3_MCK_GPIO_Port GPIOC +#define uSD_D0_Pin GPIO_PIN_8 +#define uSD_D0_GPIO_Port GPIOC +#define uSD_D1_Pin GPIO_PIN_9 +#define uSD_D1_GPIO_Port GPIOC +#define M2_CKINA8_Pin GPIO_PIN_8 +#define M2_CKINA8_GPIO_Port GPIOA +#define USB_OTGFS_VBUS_Pin GPIO_PIN_9 +#define USB_OTGFS_VBUS_GPIO_Port GPIOA +#define USB_OTGFS_ID_Pin GPIO_PIN_10 +#define USB_OTGFS_ID_GPIO_Port GPIOA +#define USB_OTGFS_DM_Pin GPIO_PIN_11 +#define USB_OTGFS_DM_GPIO_Port GPIOA +#define USB_OTGFS_DP_Pin GPIO_PIN_12 +#define USB_OTGFS_DP_GPIO_Port GPIOA #define SWDIO_Pin GPIO_PIN_13 #define SWDIO_GPIO_Port GPIOA #define SWCLK_Pin GPIO_PIN_14 #define SWCLK_GPIO_Port GPIOA -#define I2S3_SCK_Pin GPIO_PIN_10 -#define I2S3_SCK_GPIO_Port GPIOC -#define I2S3_SD_Pin GPIO_PIN_12 -#define I2S3_SD_GPIO_Port GPIOC -#define Audio_RST_Pin GPIO_PIN_4 -#define Audio_RST_GPIO_Port GPIOD -#define OTG_FS_OverCurrent_Pin GPIO_PIN_5 -#define OTG_FS_OverCurrent_GPIO_Port GPIOD +#define uSD_D2_Pin GPIO_PIN_10 +#define uSD_D2_GPIO_Port GPIOC +#define uSD_D3_Pin GPIO_PIN_11 +#define uSD_D3_GPIO_Port GPIOC +#define uSD_CLK_Pin GPIO_PIN_12 +#define uSD_CLK_GPIO_Port GPIOC +#define D2_Pin GPIO_PIN_0 +#define D2_GPIO_Port GPIOD +#define D3_Pin GPIO_PIN_1 +#define D3_GPIO_Port GPIOD +#define uSD_CMD_Pin GPIO_PIN_2 +#define uSD_CMD_GPIO_Port GPIOD +#define uSD_DETECT_Pin GPIO_PIN_3 +#define uSD_DETECT_GPIO_Port GPIOD +#define FMC_NOE_Pin GPIO_PIN_4 +#define FMC_NOE_GPIO_Port GPIOD +#define FMC_NWE_Pin GPIO_PIN_5 +#define FMC_NWE_GPIO_Port GPIOD +#define FMC_NE1_Pin GPIO_PIN_7 +#define FMC_NE1_GPIO_Port GPIOD #define SWO_Pin GPIO_PIN_3 #define SWO_GPIO_Port GPIOB -#define Audio_SCL_Pin GPIO_PIN_6 -#define Audio_SCL_GPIO_Port GPIOB -#define Audio_SDA_Pin GPIO_PIN_9 -#define Audio_SDA_GPIO_Port GPIOB -#define MEMS_INT2_Pin GPIO_PIN_1 -#define MEMS_INT2_GPIO_Port GPIOE +#define CODEC_I2S3ext_SD_Pin GPIO_PIN_4 +#define CODEC_I2S3ext_SD_GPIO_Port GPIOB +#define CODEC_I2S3_SD_Pin GPIO_PIN_5 +#define CODEC_I2S3_SD_GPIO_Port GPIOB +#define I2C1_SCL_Pin GPIO_PIN_6 +#define I2C1_SCL_GPIO_Port GPIOB +#define I2C1_SDA_Pin GPIO_PIN_7 +#define I2C1_SDA_GPIO_Port GPIOB +#define I2C2_SDA_Pin GPIO_PIN_9 +#define I2C2_SDA_GPIO_Port GPIOB +#define LED1_Pin GPIO_PIN_0 +#define LED1_GPIO_Port GPIOE +#define LED2_Pin GPIO_PIN_1 +#define LED2_GPIO_Port GPIOE + +UART_HandleTypeDef huart2; + +/* +#include "shared-module/gamepad/__init__.h" +#include "common-hal/microcontroller/Pin.h" +#include "common-hal/bleio/__init__.h" +#include "common-hal/busio/I2C.h" +#include "common-hal/busio/SPI.h" +#include "common-hal/busio/UART.h" +#include "common-hal/pulseio/PWMOut.h" +#include "common-hal/pulseio/PulseOut.h" +#include "common-hal/pulseio/PulseIn.h" +#include "common-hal/rtc/RTC.h" + +*/ + +//#include "shared-bindings/rtc/__init__.h" static void power_warning_handler(void) { reset_into_safe_mode(BROWNOUT); @@ -108,7 +209,7 @@ static void power_warning_handler(void) { safe_mode_t port_init(void) { HAL_Init(); - //sys clock + //System clock init RCC_OscInitTypeDef RCC_OscInitStruct = {0}; RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; @@ -118,14 +219,17 @@ safe_mode_t port_init(void) { __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); /** Initializes the CPU, AHB and APB busses clocks */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_HSE; RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; RCC_OscInitStruct.PLL.PLLM = 4; - RCC_OscInitStruct.PLL.PLLN = 192; - RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; - RCC_OscInitStruct.PLL.PLLQ = 8; + RCC_OscInitStruct.PLL.PLLN = 72; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 3; + RCC_OscInitStruct.PLL.PLLR = 2; HAL_RCC_OscConfig(&RCC_OscInitStruct); /** Initializes the CPU, AHB and APB busses clocks */ @@ -133,86 +237,64 @@ safe_mode_t port_init(void) { |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3); - PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_I2S; - PeriphClkInitStruct.PLLI2S.PLLI2SN = 200; - PeriphClkInitStruct.PLLI2S.PLLI2SM = 5; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); + + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_I2S_APB1|RCC_PERIPHCLK_SDIO + |RCC_PERIPHCLK_CLK48; + PeriphClkInitStruct.PLLI2S.PLLI2SN = 50; + PeriphClkInitStruct.PLLI2S.PLLI2SM = 4; PeriphClkInitStruct.PLLI2S.PLLI2SR = 2; + PeriphClkInitStruct.PLLI2S.PLLI2SQ = 2; + PeriphClkInitStruct.Clk48ClockSelection = RCC_CLK48CLKSOURCE_PLLQ; + PeriphClkInitStruct.SdioClockSelection = RCC_SDIOCLKSOURCE_CLK48; + PeriphClkInitStruct.PLLI2SSelection = RCC_PLLI2SCLKSOURCE_PLLSRC; + PeriphClkInitStruct.I2sApb1ClockSelection = RCC_I2SAPB1CLKSOURCE_PLLI2S; HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); - //GPIO setup + HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); + + //GPIO Init GPIO_InitTypeDef GPIO_InitStruct = {0}; /* GPIO Ports Clock Enable */ __HAL_RCC_GPIOE_CLK_ENABLE(); __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOF_CLK_ENABLE(); __HAL_RCC_GPIOH_CLK_ENABLE(); __HAL_RCC_GPIOA_CLK_ENABLE(); __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOG_CLK_ENABLE(); __HAL_RCC_GPIOD_CLK_ENABLE(); - /*Configure GPIO pin Output Level */ - HAL_GPIO_WritePin(OTG_FS_PowerSwitchOn_GPIO_Port, OTG_FS_PowerSwitchOn_Pin, GPIO_PIN_SET); - + HAL_GPIO_WritePin(GPIOE, LED3_Pin|LED4_Pin|LED1_Pin|LED2_Pin, GPIO_PIN_RESET); /*Configure GPIO pin Output Level */ - HAL_GPIO_WritePin(GPIOD, LD4_Pin|LD3_Pin|LD5_Pin|LD6_Pin - |Audio_RST_Pin, GPIO_PIN_RESET); - - /*Configure GPIO pin : DATA_Ready_Pin */ - GPIO_InitStruct.Pin = DATA_Ready_Pin; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(DATA_Ready_GPIO_Port, &GPIO_InitStruct); - - /*Configure GPIO pin : CS_I2C_SPI_Pin */ - GPIO_InitStruct.Pin = CS_I2C_SPI_Pin; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + HAL_GPIO_WritePin(GPIOF, LCD_BLCTRL_Pin|EXT_RESET_Pin|CTP_RST_Pin, GPIO_PIN_RESET); + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(LCD_RESET_GPIO_Port, LCD_RESET_Pin, GPIO_PIN_RESET); + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(USB_OTGFS_PPWR_EN_GPIO_Port, USB_OTGFS_PPWR_EN_Pin, GPIO_PIN_SET); + /*Configure GPIO pins : LED3_Pin LED4_Pin LED1_Pin LED2_Pin */ + GPIO_InitStruct.Pin = LED3_Pin|LED4_Pin|LED1_Pin|LED2_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD; GPIO_InitStruct.Pull = GPIO_NOPULL; GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; - HAL_GPIO_Init(CS_I2C_SPI_GPIO_Port, &GPIO_InitStruct); - - /*Configure GPIO pins : INT1_Pin INT2_Pin MEMS_INT2_Pin */ - GPIO_InitStruct.Pin = INT1_Pin|INT2_Pin|MEMS_INT2_Pin; - GPIO_InitStruct.Mode = GPIO_MODE_EVT_RISING; - GPIO_InitStruct.Pull = GPIO_NOPULL; HAL_GPIO_Init(GPIOE, &GPIO_InitStruct); - - /*Configure GPIO pin : OTG_FS_PowerSwitchOn_Pin */ - GPIO_InitStruct.Pin = OTG_FS_PowerSwitchOn_Pin; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + /*Configure GPIO pin : USB_OTGFS_PPWR_EN_Pin */ + GPIO_InitStruct.Pin = USB_OTGFS_PPWR_EN_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD; GPIO_InitStruct.Pull = GPIO_NOPULL; GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; - HAL_GPIO_Init(OTG_FS_PowerSwitchOn_GPIO_Port, &GPIO_InitStruct); - - /*Configure GPIO pin : PA0 */ - GPIO_InitStruct.Pin = GPIO_PIN_0; - GPIO_InitStruct.Mode = GPIO_MODE_EVT_RISING; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /*Configure GPIO pins : LD4_Pin LD3_Pin LD5_Pin LD6_Pin - Audio_RST_Pin */ - GPIO_InitStruct.Pin = LD4_Pin|LD3_Pin|LD5_Pin|LD6_Pin - |Audio_RST_Pin; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; - HAL_GPIO_Init(GPIOD, &GPIO_InitStruct); - - /*Configure GPIO pin : OTG_FS_OverCurrent_Pin */ - GPIO_InitStruct.Pin = OTG_FS_OverCurrent_Pin; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(OTG_FS_OverCurrent_GPIO_Port, &GPIO_InitStruct); + HAL_GPIO_Init(USB_OTGFS_PPWR_EN_GPIO_Port, &GPIO_InitStruct); //Status LED chain - HAL_GPIO_WritePin(GPIOD, LD4_Pin, GPIO_PIN_RESET); //LED 1 - HAL_GPIO_WritePin(GPIOD, LD3_Pin, GPIO_PIN_SET); //LED 2 - HAL_GPIO_WritePin(GPIOD, LD5_Pin, GPIO_PIN_SET); //LED 3 - HAL_GPIO_WritePin(GPIOD, LD6_Pin, GPIO_PIN_SET); //LED 4 + HAL_GPIO_WritePin(GPIOE, GPIO_PIN_0, GPIO_PIN_RESET); //LED 1 + HAL_GPIO_WritePin(GPIOE, GPIO_PIN_1, GPIO_PIN_SET); //LED 2 + HAL_GPIO_WritePin(GPIOE, GPIO_PIN_2, GPIO_PIN_SET); //LED 3 + HAL_GPIO_WritePin(GPIOE, GPIO_PIN_3, GPIO_PIN_SET); //LED 4 tick_init(); + // HAL_GPIO_WritePin(LED3_GPIO_Port, LED3_Pin, GPIO_PIN_RESET); board_init(); diff --git a/ports/stm32f4/supervisor/port_411.c b/ports/stm32f4/supervisor/port_411.c new file mode 100644 index 000000000..8a106c477 --- /dev/null +++ b/ports/stm32f4/supervisor/port_411.c @@ -0,0 +1,246 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include <stdint.h> +#include "supervisor/port.h" +#include "boards/board.h" + +#include "tick.h" +//#include "shared-bindings/rtc/__init__.h" + +#include "stm32f4xx_hal.h" +#define DATA_Ready_Pin GPIO_PIN_2 +#define DATA_Ready_GPIO_Port GPIOE +#define CS_I2C_SPI_Pin GPIO_PIN_3 +#define CS_I2C_SPI_GPIO_Port GPIOE +#define INT1_Pin GPIO_PIN_4 +#define INT1_GPIO_Port GPIOE +#define INT2_Pin GPIO_PIN_5 +#define INT2_GPIO_Port GPIOE +#define PC14_OSC32_IN_Pin GPIO_PIN_14 +#define PC14_OSC32_IN_GPIO_Port GPIOC +#define PC15_OSC32_OUT_Pin GPIO_PIN_15 +#define PC15_OSC32_OUT_GPIO_Port GPIOC +#define PH0_OSC_IN_Pin GPIO_PIN_0 +#define PH0_OSC_IN_GPIO_Port GPIOH +#define PH1_OSC_OUT_Pin GPIO_PIN_1 +#define PH1_OSC_OUT_GPIO_Port GPIOH +#define OTG_FS_PowerSwitchOn_Pin GPIO_PIN_0 +#define OTG_FS_PowerSwitchOn_GPIO_Port GPIOC +#define PDM_OUT_Pin GPIO_PIN_3 +#define PDM_OUT_GPIO_Port GPIOC +#define I2S3_WS_Pin GPIO_PIN_4 +#define I2S3_WS_GPIO_Port GPIOA +#define SPI1_SCK_Pin GPIO_PIN_5 +#define SPI1_SCK_GPIO_Port GPIOA +#define SPI1_MISO_Pin GPIO_PIN_6 +#define SPI1_MISO_GPIO_Port GPIOA +#define SPI1_MOSI_Pin GPIO_PIN_7 +#define SPI1_MOSI_GPIO_Port GPIOA +#define CLK_IN_Pin GPIO_PIN_10 +#define CLK_IN_GPIO_Port GPIOB +#define LD4_Pin GPIO_PIN_12 +#define LD4_GPIO_Port GPIOD +#define LD3_Pin GPIO_PIN_13 +#define LD3_GPIO_Port GPIOD +#define LD5_Pin GPIO_PIN_14 +#define LD5_GPIO_Port GPIOD +#define LD6_Pin GPIO_PIN_15 +#define LD6_GPIO_Port GPIOD +#define I2S3_MCK_Pin GPIO_PIN_7 +#define I2S3_MCK_GPIO_Port GPIOC +#define VBUS_FS_Pin GPIO_PIN_9 +#define VBUS_FS_GPIO_Port GPIOA +#define OTG_FS_ID_Pin GPIO_PIN_10 +#define OTG_FS_ID_GPIO_Port GPIOA +#define OTG_FS_DM_Pin GPIO_PIN_11 +#define OTG_FS_DM_GPIO_Port GPIOA +#define OTG_FS_DP_Pin GPIO_PIN_12 +#define OTG_FS_DP_GPIO_Port GPIOA +#define SWDIO_Pin GPIO_PIN_13 +#define SWDIO_GPIO_Port GPIOA +#define SWCLK_Pin GPIO_PIN_14 +#define SWCLK_GPIO_Port GPIOA +#define I2S3_SCK_Pin GPIO_PIN_10 +#define I2S3_SCK_GPIO_Port GPIOC +#define I2S3_SD_Pin GPIO_PIN_12 +#define I2S3_SD_GPIO_Port GPIOC +#define Audio_RST_Pin GPIO_PIN_4 +#define Audio_RST_GPIO_Port GPIOD +#define OTG_FS_OverCurrent_Pin GPIO_PIN_5 +#define OTG_FS_OverCurrent_GPIO_Port GPIOD +#define SWO_Pin GPIO_PIN_3 +#define SWO_GPIO_Port GPIOB +#define Audio_SCL_Pin GPIO_PIN_6 +#define Audio_SCL_GPIO_Port GPIOB +#define Audio_SDA_Pin GPIO_PIN_9 +#define Audio_SDA_GPIO_Port GPIOB +#define MEMS_INT2_Pin GPIO_PIN_1 +#define MEMS_INT2_GPIO_Port GPIOE + +static void power_warning_handler(void) { + reset_into_safe_mode(BROWNOUT); +} + +safe_mode_t port_init(void) { + HAL_Init(); + + //sys clock + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + /** Configure the main internal regulator output voltage + */ + __HAL_RCC_PWR_CLK_ENABLE(); + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + /** Initializes the CPU, AHB and APB busses clocks + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = 4; + RCC_OscInitStruct.PLL.PLLN = 192; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; + RCC_OscInitStruct.PLL.PLLQ = 8; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + /** Initializes the CPU, AHB and APB busses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3); + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_I2S; + PeriphClkInitStruct.PLLI2S.PLLI2SN = 200; + PeriphClkInitStruct.PLLI2S.PLLI2SM = 5; + PeriphClkInitStruct.PLLI2S.PLLI2SR = 2; + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); + + //GPIO setup + GPIO_InitTypeDef GPIO_InitStruct = {0}; + /* GPIO Ports Clock Enable */ + __HAL_RCC_GPIOE_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOH_CLK_ENABLE(); + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOD_CLK_ENABLE(); + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(OTG_FS_PowerSwitchOn_GPIO_Port, OTG_FS_PowerSwitchOn_Pin, GPIO_PIN_SET); + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(GPIOD, LD4_Pin|LD3_Pin|LD5_Pin|LD6_Pin + |Audio_RST_Pin, GPIO_PIN_RESET); + + /*Configure GPIO pin : DATA_Ready_Pin */ + GPIO_InitStruct.Pin = DATA_Ready_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(DATA_Ready_GPIO_Port, &GPIO_InitStruct); + + /*Configure GPIO pin : CS_I2C_SPI_Pin */ + GPIO_InitStruct.Pin = CS_I2C_SPI_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(CS_I2C_SPI_GPIO_Port, &GPIO_InitStruct); + + /*Configure GPIO pins : INT1_Pin INT2_Pin MEMS_INT2_Pin */ + GPIO_InitStruct.Pin = INT1_Pin|INT2_Pin|MEMS_INT2_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_EVT_RISING; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOE, &GPIO_InitStruct); + + /*Configure GPIO pin : OTG_FS_PowerSwitchOn_Pin */ + GPIO_InitStruct.Pin = OTG_FS_PowerSwitchOn_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(OTG_FS_PowerSwitchOn_GPIO_Port, &GPIO_InitStruct); + + /*Configure GPIO pin : PA0 */ + GPIO_InitStruct.Pin = GPIO_PIN_0; + GPIO_InitStruct.Mode = GPIO_MODE_EVT_RISING; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /*Configure GPIO pins : LD4_Pin LD3_Pin LD5_Pin LD6_Pin + Audio_RST_Pin */ + GPIO_InitStruct.Pin = LD4_Pin|LD3_Pin|LD5_Pin|LD6_Pin + |Audio_RST_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(GPIOD, &GPIO_InitStruct); + + /*Configure GPIO pin : OTG_FS_OverCurrent_Pin */ + GPIO_InitStruct.Pin = OTG_FS_OverCurrent_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(OTG_FS_OverCurrent_GPIO_Port, &GPIO_InitStruct); + + //Status LED chain + HAL_GPIO_WritePin(GPIOD, LD4_Pin, GPIO_PIN_RESET); //LED 1 + HAL_GPIO_WritePin(GPIOD, LD3_Pin, GPIO_PIN_SET); //LED 2 + HAL_GPIO_WritePin(GPIOD, LD5_Pin, GPIO_PIN_SET); //LED 3 + HAL_GPIO_WritePin(GPIOD, LD6_Pin, GPIO_PIN_SET); //LED 4 + + tick_init(); + + board_init(); + + return NO_SAFE_MODE; +} + +void reset_port(void) { + +} + +void reset_to_bootloader(void) { + +} + +void reset_cpu(void) { + +} + +extern uint32_t _ebss; +// Place the word to save just after our BSS section that gets blanked. +void port_set_saved_word(uint32_t value) { + _ebss = value; +} + +uint32_t port_get_saved_word(void) { + return _ebss; +} + +// void HardFault_Handler(void) { + +// } diff --git a/ports/stm32f4/supervisor/port_412.c b/ports/stm32f4/supervisor/port_412.c deleted file mode 100644 index 0a0e08fdf..000000000 --- a/ports/stm32f4/supervisor/port_412.c +++ /dev/null @@ -1,328 +0,0 @@ -/* - * This file is part of the MicroPython project, http://micropython.org/ - * - * The MIT License (MIT) - * - * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -#include <stdint.h> -#include "supervisor/port.h" -#include "boards/board.h" - -#include "tick.h" -//#include "shared-bindings/rtc/__init__.h" - -#include "stm32f4xx_hal.h" - -#define LED3_Pin GPIO_PIN_2 -#define LED3_GPIO_Port GPIOE -#define LED4_Pin GPIO_PIN_3 -#define LED4_GPIO_Port GPIOE -#define DFSDM_DATIN3_Pin GPIO_PIN_4 -#define DFSDM_DATIN3_GPIO_Port GPIOE -#define A0_Pin GPIO_PIN_0 -#define A0_GPIO_Port GPIOF -#define LCD_BLCTRL_Pin GPIO_PIN_5 -#define LCD_BLCTRL_GPIO_Port GPIOF -#define QSPI_BK1_IO3_Pin GPIO_PIN_6 -#define QSPI_BK1_IO3_GPIO_Port GPIOF -#define QSPI_BK1_IO2_Pin GPIO_PIN_7 -#define QSPI_BK1_IO2_GPIO_Port GPIOF -#define QSPI_BK1_IO0_Pin GPIO_PIN_8 -#define QSPI_BK1_IO0_GPIO_Port GPIOF -#define QSPI_BK1_IO1_Pin GPIO_PIN_9 -#define QSPI_BK1_IO1_GPIO_Port GPIOF -#define STLK_MCO_Pin GPIO_PIN_0 -#define STLK_MCO_GPIO_Port GPIOH -#define DFSDM_CKOUT_Pin GPIO_PIN_2 -#define DFSDM_CKOUT_GPIO_Port GPIOC -#define JOY_SEL_Pin GPIO_PIN_0 -#define JOY_SEL_GPIO_Port GPIOA -#define STLINK_RX_Pin GPIO_PIN_2 -#define STLINK_RX_GPIO_Port GPIOA -#define STLINK_TX_Pin GPIO_PIN_3 -#define STLINK_TX_GPIO_Port GPIOA -#define CODEC_I2S3_WS_Pin GPIO_PIN_4 -#define CODEC_I2S3_WS_GPIO_Port GPIOA -#define DFSDM_DATIN0_Pin GPIO_PIN_1 -#define DFSDM_DATIN0_GPIO_Port GPIOB -#define QSPI_CLK_Pin GPIO_PIN_2 -#define QSPI_CLK_GPIO_Port GPIOB -#define EXT_RESET_Pin GPIO_PIN_11 -#define EXT_RESET_GPIO_Port GPIOF -#define CTP_RST_Pin GPIO_PIN_12 -#define CTP_RST_GPIO_Port GPIOF -#define JOY_RIGHT_Pin GPIO_PIN_14 -#define JOY_RIGHT_GPIO_Port GPIOF -#define JOY_LEFT_Pin GPIO_PIN_15 -#define JOY_LEFT_GPIO_Port GPIOF -#define JOY_UP_Pin GPIO_PIN_0 -#define JOY_UP_GPIO_Port GPIOG -#define JOY_DOWN_Pin GPIO_PIN_1 -#define JOY_DOWN_GPIO_Port GPIOG -#define D4_Pin GPIO_PIN_7 -#define D4_GPIO_Port GPIOE -#define D5_Pin GPIO_PIN_8 -#define D5_GPIO_Port GPIOE -#define D6_Pin GPIO_PIN_9 -#define D6_GPIO_Port GPIOE -#define D7_Pin GPIO_PIN_10 -#define D7_GPIO_Port GPIOE -#define D8_Pin GPIO_PIN_11 -#define D8_GPIO_Port GPIOE -#define D9_Pin GPIO_PIN_12 -#define D9_GPIO_Port GPIOE -#define D10_Pin GPIO_PIN_13 -#define D10_GPIO_Port GPIOE -#define D11_Pin GPIO_PIN_14 -#define D11_GPIO_Port GPIOE -#define D12_Pin GPIO_PIN_15 -#define D12_GPIO_Port GPIOE -#define I2C2_SCL_Pin GPIO_PIN_10 -#define I2C2_SCL_GPIO_Port GPIOB -#define M2_CKIN_Pin GPIO_PIN_11 -#define M2_CKIN_GPIO_Port GPIOB -#define CODEC_I2S3_SCK_Pin GPIO_PIN_12 -#define CODEC_I2S3_SCK_GPIO_Port GPIOB -#define D13_Pin GPIO_PIN_8 -#define D13_GPIO_Port GPIOD -#define D14_Pin GPIO_PIN_9 -#define D14_GPIO_Port GPIOD -#define D15_Pin GPIO_PIN_10 -#define D15_GPIO_Port GPIOD -#define LCD_RESET_Pin GPIO_PIN_11 -#define LCD_RESET_GPIO_Port GPIOD -#define D0_Pin GPIO_PIN_14 -#define D0_GPIO_Port GPIOD -#define D1_Pin GPIO_PIN_15 -#define D1_GPIO_Port GPIOD -#define CODEC_INT_Pin GPIO_PIN_2 -#define CODEC_INT_GPIO_Port GPIOG -#define LCD_TE_Pin GPIO_PIN_4 -#define LCD_TE_GPIO_Port GPIOG -#define CTP_INT_Pin GPIO_PIN_5 -#define CTP_INT_GPIO_Port GPIOG -#define QSPI_BK1_NCS_Pin GPIO_PIN_6 -#define QSPI_BK1_NCS_GPIO_Port GPIOG -#define USB_OTGFS_OVRCR_Pin GPIO_PIN_7 -#define USB_OTGFS_OVRCR_GPIO_Port GPIOG -#define USB_OTGFS_PPWR_EN_Pin GPIO_PIN_8 -#define USB_OTGFS_PPWR_EN_GPIO_Port GPIOG -#define CODEC_I2S3_MCK_Pin GPIO_PIN_7 -#define CODEC_I2S3_MCK_GPIO_Port GPIOC -#define uSD_D0_Pin GPIO_PIN_8 -#define uSD_D0_GPIO_Port GPIOC -#define uSD_D1_Pin GPIO_PIN_9 -#define uSD_D1_GPIO_Port GPIOC -#define M2_CKINA8_Pin GPIO_PIN_8 -#define M2_CKINA8_GPIO_Port GPIOA -#define USB_OTGFS_VBUS_Pin GPIO_PIN_9 -#define USB_OTGFS_VBUS_GPIO_Port GPIOA -#define USB_OTGFS_ID_Pin GPIO_PIN_10 -#define USB_OTGFS_ID_GPIO_Port GPIOA -#define USB_OTGFS_DM_Pin GPIO_PIN_11 -#define USB_OTGFS_DM_GPIO_Port GPIOA -#define USB_OTGFS_DP_Pin GPIO_PIN_12 -#define USB_OTGFS_DP_GPIO_Port GPIOA -#define SWDIO_Pin GPIO_PIN_13 -#define SWDIO_GPIO_Port GPIOA -#define SWCLK_Pin GPIO_PIN_14 -#define SWCLK_GPIO_Port GPIOA -#define uSD_D2_Pin GPIO_PIN_10 -#define uSD_D2_GPIO_Port GPIOC -#define uSD_D3_Pin GPIO_PIN_11 -#define uSD_D3_GPIO_Port GPIOC -#define uSD_CLK_Pin GPIO_PIN_12 -#define uSD_CLK_GPIO_Port GPIOC -#define D2_Pin GPIO_PIN_0 -#define D2_GPIO_Port GPIOD -#define D3_Pin GPIO_PIN_1 -#define D3_GPIO_Port GPIOD -#define uSD_CMD_Pin GPIO_PIN_2 -#define uSD_CMD_GPIO_Port GPIOD -#define uSD_DETECT_Pin GPIO_PIN_3 -#define uSD_DETECT_GPIO_Port GPIOD -#define FMC_NOE_Pin GPIO_PIN_4 -#define FMC_NOE_GPIO_Port GPIOD -#define FMC_NWE_Pin GPIO_PIN_5 -#define FMC_NWE_GPIO_Port GPIOD -#define FMC_NE1_Pin GPIO_PIN_7 -#define FMC_NE1_GPIO_Port GPIOD -#define SWO_Pin GPIO_PIN_3 -#define SWO_GPIO_Port GPIOB -#define CODEC_I2S3ext_SD_Pin GPIO_PIN_4 -#define CODEC_I2S3ext_SD_GPIO_Port GPIOB -#define CODEC_I2S3_SD_Pin GPIO_PIN_5 -#define CODEC_I2S3_SD_GPIO_Port GPIOB -#define I2C1_SCL_Pin GPIO_PIN_6 -#define I2C1_SCL_GPIO_Port GPIOB -#define I2C1_SDA_Pin GPIO_PIN_7 -#define I2C1_SDA_GPIO_Port GPIOB -#define I2C2_SDA_Pin GPIO_PIN_9 -#define I2C2_SDA_GPIO_Port GPIOB -#define LED1_Pin GPIO_PIN_0 -#define LED1_GPIO_Port GPIOE -#define LED2_Pin GPIO_PIN_1 -#define LED2_GPIO_Port GPIOE - -UART_HandleTypeDef huart2; - -/* -#include "shared-module/gamepad/__init__.h" -#include "common-hal/microcontroller/Pin.h" -#include "common-hal/bleio/__init__.h" -#include "common-hal/busio/I2C.h" -#include "common-hal/busio/SPI.h" -#include "common-hal/busio/UART.h" -#include "common-hal/pulseio/PWMOut.h" -#include "common-hal/pulseio/PulseOut.h" -#include "common-hal/pulseio/PulseIn.h" -#include "common-hal/rtc/RTC.h" - -*/ - -//#include "shared-bindings/rtc/__init__.h" - -static void power_warning_handler(void) { - reset_into_safe_mode(BROWNOUT); -} - -safe_mode_t port_init(void) { - HAL_Init(); - - //System clock init - RCC_OscInitTypeDef RCC_OscInitStruct = {0}; - RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; - RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; - /** Configure the main internal regulator output voltage - */ - __HAL_RCC_PWR_CLK_ENABLE(); - __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); - /** Initializes the CPU, AHB and APB busses clocks - */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.HSIState = RCC_HSI_ON; - RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = 4; - RCC_OscInitStruct.PLL.PLLN = 72; - RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; - RCC_OscInitStruct.PLL.PLLQ = 3; - RCC_OscInitStruct.PLL.PLLR = 2; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - /** Initializes the CPU, AHB and APB busses clocks - */ - RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK - |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); - - PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_I2S_APB1|RCC_PERIPHCLK_SDIO - |RCC_PERIPHCLK_CLK48; - PeriphClkInitStruct.PLLI2S.PLLI2SN = 50; - PeriphClkInitStruct.PLLI2S.PLLI2SM = 4; - PeriphClkInitStruct.PLLI2S.PLLI2SR = 2; - PeriphClkInitStruct.PLLI2S.PLLI2SQ = 2; - PeriphClkInitStruct.Clk48ClockSelection = RCC_CLK48CLKSOURCE_PLLQ; - PeriphClkInitStruct.SdioClockSelection = RCC_SDIOCLKSOURCE_CLK48; - PeriphClkInitStruct.PLLI2SSelection = RCC_PLLI2SCLKSOURCE_PLLSRC; - PeriphClkInitStruct.I2sApb1ClockSelection = RCC_I2SAPB1CLKSOURCE_PLLI2S; - HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); - - HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); - - //GPIO Init - GPIO_InitTypeDef GPIO_InitStruct = {0}; - /* GPIO Ports Clock Enable */ - __HAL_RCC_GPIOE_CLK_ENABLE(); - __HAL_RCC_GPIOC_CLK_ENABLE(); - __HAL_RCC_GPIOF_CLK_ENABLE(); - __HAL_RCC_GPIOH_CLK_ENABLE(); - __HAL_RCC_GPIOA_CLK_ENABLE(); - __HAL_RCC_GPIOB_CLK_ENABLE(); - __HAL_RCC_GPIOG_CLK_ENABLE(); - __HAL_RCC_GPIOD_CLK_ENABLE(); - /*Configure GPIO pin Output Level */ - HAL_GPIO_WritePin(GPIOE, LED3_Pin|LED4_Pin|LED1_Pin|LED2_Pin, GPIO_PIN_RESET); - /*Configure GPIO pin Output Level */ - HAL_GPIO_WritePin(GPIOF, LCD_BLCTRL_Pin|EXT_RESET_Pin|CTP_RST_Pin, GPIO_PIN_RESET); - /*Configure GPIO pin Output Level */ - HAL_GPIO_WritePin(LCD_RESET_GPIO_Port, LCD_RESET_Pin, GPIO_PIN_RESET); - /*Configure GPIO pin Output Level */ - HAL_GPIO_WritePin(USB_OTGFS_PPWR_EN_GPIO_Port, USB_OTGFS_PPWR_EN_Pin, GPIO_PIN_SET); - /*Configure GPIO pins : LED3_Pin LED4_Pin LED1_Pin LED2_Pin */ - GPIO_InitStruct.Pin = LED3_Pin|LED4_Pin|LED1_Pin|LED2_Pin; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; - HAL_GPIO_Init(GPIOE, &GPIO_InitStruct); - /*Configure GPIO pin : USB_OTGFS_PPWR_EN_Pin */ - GPIO_InitStruct.Pin = USB_OTGFS_PPWR_EN_Pin; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; - HAL_GPIO_Init(USB_OTGFS_PPWR_EN_GPIO_Port, &GPIO_InitStruct); - - //Status LED chain - HAL_GPIO_WritePin(GPIOE, GPIO_PIN_0, GPIO_PIN_RESET); //LED 1 - HAL_GPIO_WritePin(GPIOE, GPIO_PIN_1, GPIO_PIN_SET); //LED 2 - HAL_GPIO_WritePin(GPIOE, GPIO_PIN_2, GPIO_PIN_SET); //LED 3 - HAL_GPIO_WritePin(GPIOE, GPIO_PIN_3, GPIO_PIN_SET); //LED 4 - - tick_init(); - // HAL_GPIO_WritePin(LED3_GPIO_Port, LED3_Pin, GPIO_PIN_RESET); - - board_init(); - - return NO_SAFE_MODE; -} - -void reset_port(void) { - -} - -void reset_to_bootloader(void) { - -} - -void reset_cpu(void) { - -} - -extern uint32_t _ebss; -// Place the word to save just after our BSS section that gets blanked. -void port_set_saved_word(uint32_t value) { - _ebss = value; -} - -uint32_t port_get_saved_word(void) { - return _ebss; -} - -// void HardFault_Handler(void) { - -// } diff --git a/supervisor/supervisor.mk b/supervisor/supervisor.mk index 11f0adbf9..4ea3a8260 100644 --- a/supervisor/supervisor.mk +++ b/supervisor/supervisor.mk @@ -51,7 +51,6 @@ else SRC_SUPERVISOR += supervisor/internal_flash.c endif -USB=TRUE ifeq ($(USB),FALSE) ifeq ($(wildcard supervisor/serial.c),) SRC_SUPERVISOR += supervisor/stub/serial.c |