diff options
128 files changed, 5883 insertions, 993 deletions
diff --git a/.gitattributes b/.gitattributes index 5ebde95f0..c077807ab 100644 --- a/.gitattributes +++ b/.gitattributes @@ -18,6 +18,7 @@ *.deb binary *.zip binary *.pdf binary +*.wav binary # These should also not be modified by git. tests/basics/string_cr_conversion.py -text diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 34e0b0821..adba66314 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -208,6 +208,7 @@ jobs: - "datum_imu" - "datum_light" - "datum_weather" + - "dynalora_usb" - "dynossat_edu_eps" - "dynossat_edu_obc" - "electronut_labs_blip" diff --git a/WEBUSB_README.md b/WEBUSB_README.md new file mode 100644 index 000000000..a257d5259 --- /dev/null +++ b/WEBUSB_README.md @@ -0,0 +1,94 @@ +<!-- +SPDX-FileCopyrightText: 2014 MicroPython & CircuitPython contributors (https://github.com/adafruit/circuitpython/graphs/contributors) + +SPDX-License-Identifier: MIT +--> + +# WebUSB Serial Support + +To date, this has only been tested on one port (esp32s2), on one board (espressif_kaluga_1). + +## What it does + +If you have ever used CircuitPython on a platform with a graphical LCD display, you have probably +already seen multiple "consoles" in use (although the LCD console is "output only"). + +New compile-time option CIRCUITPY_USB_VENDOR enables an additional "console" that can be used in +parallel with the original (CDC) serial console. + +Web pages that support the WebUSB standard can connect to the "vendor" interface and activate +this WebUSB serial console at any time. + +You can type into either console, and CircuitPython output is sent to all active consoles. + +One example of a web page you can use to test drive this feature can be found at: + +https://adafruit.github.io/Adafruit_TinyUSB_Arduino/examples/webusb-serial/index.html + +## How to enable + +Update your platform's mpconfigboard.mk file to enable and disable specific types of USB interfaces. + +CIRCUITPY_USB_HID = xxx +CIRCUITPY_USB_MIDI = xxx +CIRCUITPY_USB_VENDOR = xxx + +On at least some of the hardware platforms, the maximum number of USB endpoints is fixed. +For example, on the ESP32S2, you must pick only one of the above 3 interfaces to be enabled. + +Original espressif_kaluga_1 mpconfigboard.mk settings: + +CIRCUITPY_USB_HID = 1 +CIRCUITPY_USB_MIDI = 0 +CIRCUITPY_USB_VENDOR = 0 + +Settings to enable WebUSB instead: + +CIRCUITPY_USB_HID = 0 +CIRCUITPY_USB_MIDI = 0 +CIRCUITPY_USB_VENDOR = 1 + +Notice that to enable VENDOR on ESP32-S2, we had to give up HID. There may be platforms that can have both, or even all three. + +## Implementation Notes + +CircuitPython uses the tinyusb library. + +The tinyusb library already has support for WebUSB serial. +The tinyusb examples already include a "WebUSB serial" example. + + Sidenote - The use of the term "vendor" instead of "WebUSB" was done to match tinyusb. + +Basically, this feature was ported into CircuitPython by pulling code snippets out of the +tinyusb example, and putting them where they best belonged in the CircuitPython codebase. + +There was one complication: + +tinyusb uses C preprocessor macros to define things like USB descriptors. + +CircuitPython uses a Python program (tools/gen_usb_descriptor.py) to create USB descriptors (etc.) +using "helper objects" from another repo (adafruit_usb_descriptor). This means some of the example +code had to be adapted to the new programing model, and gen_usb_descriptor gained new command-line +options to control the generated code. + +The generated files go into the "build" directory, look for autogen_usb_descriptor.c and +genhdr/autogen_usb_descriptor.h. + + +Also worth pointing out - the re-use of the CDC connect/disconnect mechanism is not actually part +of the WebUSB standard, it's more of "common idiom". We make use of it here because we need to know +when we should be paying attention to the WebUSB serial interface, and when we should ignore it.. + +## Possible future work areas + +The current code uses the existing Python infrastructure to create the Interface descriptor, but +simply outputs the code snippets from the original tinyusb demo code to create the WEBUSB_URL, +BOS, and MS_OS_20 descriptors. I suppose additional work could be done to add these to the +adafruit_usb_descriptor project, and then gen_usb_descriptor.py could be modified to make use +of them. + +Program gen_usb_descriptor.py creates objects for most interface types, regardless of whether or +not they are actually enabled. This increases the size of a generated string table. I made the +new vendor-interface-related code not do this (because some of the ARM platforms would no longer +build), but I did not go back and do this for the other interface types (CDC, MIDI, HID, etc.) +Some FLASH savings are probably possible if this is done. diff --git a/docs/index.rst b/docs/index.rst index 6dadddfc1..3ee76fdd8 100644 --- a/docs/index.rst +++ b/docs/index.rst @@ -46,6 +46,7 @@ Full Table of Contents ../BUILDING ../CODE_OF_CONDUCT ../license.rst + ../WEBUSB_README Indices and tables ================== diff --git a/locale/ID.po b/locale/ID.po index e11123398..d2d1cc9ad 100644 --- a/locale/ID.po +++ b/locale/ID.po @@ -344,6 +344,10 @@ msgstr "Semua perangkat UART sedang digunakan" msgid "All event channels in use" msgstr "Semua channel event sedang digunakan" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "Semua channel event yang disinkronisasi sedang digunakan" @@ -392,6 +396,7 @@ msgstr "AnalogIn tidak didukung pada pin yang diberikan" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "fungsionalitas AnalogOut tidak didukung" @@ -593,6 +598,7 @@ msgstr "Tidak dapat menghapus nilai" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "Tidak bisa mendapatkan pull pada saat mode output" @@ -636,6 +642,10 @@ msgstr "" "Tidak dapat melakukan reset ke bootloader karena tidak ada bootloader yang " "terisi" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "Tidak dapat menetapkan nilai saat arah input." @@ -878,11 +888,12 @@ msgstr "Channel EXTINT sedang digunakan" msgid "Error in regex" msgstr "Error pada regex" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -936,7 +947,7 @@ msgstr "FFT didefinisikan hanya untuk ndarrays" msgid "FFT is implemented for linear arrays only" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "" @@ -1064,6 +1075,10 @@ msgstr "operasi I/O pada file tertutup" msgid "I2C Init Error" msgstr "Gagal Inisialisasi I2C" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "" @@ -1089,6 +1104,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Ukuran penyangga salah" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "" @@ -1101,6 +1120,31 @@ msgstr "" msgid "Input/output error" msgstr "Kesalahan input/output" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "Otentikasi tidak cukup" @@ -1152,7 +1196,7 @@ msgstr "Pin DAC yang diberikan tidak valid" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "Frekuensi PWM tidak valid" @@ -1246,6 +1290,8 @@ msgstr "Pin untuk channel kanan tidak valid" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "Pin-pin tidak valid" @@ -1274,7 +1320,7 @@ msgstr "security_mode tidak valid" msgid "Invalid size" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "" @@ -1282,10 +1328,6 @@ msgstr "" msgid "Invalid state" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "Suara tidak valid" @@ -1302,10 +1344,6 @@ msgstr "File wave tidak valid" msgid "Invalid word/bit length" msgstr "Panjang kata/bit tidak valid" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "Panjang kunci harus 16, 24, atau 32 byte" @@ -1367,6 +1405,36 @@ msgstr "Penundaan mulai mikrofon harus dalam kisaran 0,0 hingga 1,0" msgid "Missing MISO or MOSI Pin" msgstr "Tidak menemukan Pin MISO atau MOSI" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "Harus berupa subclass %q." @@ -1420,14 +1488,14 @@ msgstr "Tidak ada Pin MOSI" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Tidak pin RX" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Tidak ada pin TX" @@ -1484,6 +1552,16 @@ msgstr "Tidak ada lagi penghitung waktu yang tersedia pada pin ini." msgid "No network with that ssid" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Tidak ada pull-down pada pin; 1Mohm direkomendasikan" @@ -1541,6 +1619,10 @@ msgstr "Parity ganjil tidak didukung" msgid "Only 8 or 16 bit mono with " msgstr "Hanya 8 atau 16 bit mono dengan " +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "" @@ -1594,7 +1676,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "" @@ -1619,6 +1701,7 @@ msgstr "" "konstruksi." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "ParallelBus belum didukung" @@ -1631,11 +1714,20 @@ msgstr "" msgid "Permission denied" msgstr "Izin ditolak" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Pin tidak mempunya kemampuan untuk ADC (Analog Digital Converter)" @@ -1699,10 +1791,34 @@ msgstr "" msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Pull tidak digunakan saat arah output." +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "Kesalahan DeInit RNG" @@ -1711,6 +1827,10 @@ msgstr "Kesalahan DeInit RNG" msgid "RNG Init Error" msgstr "Kesalahan Init RNG" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1718,6 +1838,7 @@ msgstr "Pembalikan RS485 ditentukan saat tidak dalam mode RS485" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "Kalibrasi RTC tidak didukung pada board ini" @@ -1726,7 +1847,7 @@ msgid "RTC is not supported on this board" msgstr "RTC tidak didukung di board ini" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "RTS/CTS/RS485 Belum didukung pada perangkat ini" @@ -1784,11 +1905,6 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "SDA atau SCL membutuhkan pull up" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -1807,6 +1923,10 @@ msgstr "Kesalahan Init SPI" msgid "SPI Re-initialization error" msgstr "Kesalahan Inisialisasi ulang SPI" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "Tingkat sampel harus positif" @@ -1837,6 +1957,14 @@ msgstr "Serializer sedang digunakan" msgid "Server side context cannot have hostname" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "" @@ -2009,6 +2137,10 @@ msgstr "Kesalahan Init UART" msgid "UART Re-init error" msgstr "Kesalahan Re-init UART" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "Kesalahan penulisan UART" @@ -2072,7 +2204,7 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "Tipe urf nrfx tak sesuai" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" @@ -2115,7 +2247,8 @@ msgstr "" "perangkat lain ditolak atau diabaikan." #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Baudrate tidak didukung" @@ -2167,6 +2300,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "PERINGATAN: Nama file kode anda mempunyai dua ekstensi\n" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" @@ -2379,7 +2513,7 @@ msgstr "" msgid "buffer too small" msgstr "" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "" @@ -3540,6 +3674,10 @@ msgstr "Muncul dari PulseIn yang kosong" msgid "pop from empty %q" msgstr "" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "" @@ -3556,6 +3694,7 @@ msgstr "" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3573,6 +3712,14 @@ msgstr "" msgid "pressing both buttons at start up.\n" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "antrian meluap (overflow)" @@ -3776,6 +3923,7 @@ msgstr "" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" @@ -4059,6 +4207,9 @@ msgstr "" msgid "zi must be of shape (n_section, 2)" msgstr "" +#~ msgid "SDA or SCL needs a pull up" +#~ msgstr "SDA atau SCL membutuhkan pull up" + #~ msgid "%d address pins and %d rgb pins indicate a height of %d, not %d" #~ msgstr "pin alamat %d dan pin rgb %d menunjukkan tinggi %d, bukan %d" diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index 8443fb85b..e936dd1f8 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -363,6 +363,7 @@ msgstr "" #: ports/esp32s2/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c +#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c msgid "All timers in use" msgstr "" @@ -629,6 +630,10 @@ msgstr "" msgid "Cannot reset into bootloader because no bootloader is present." msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "" @@ -865,7 +870,7 @@ msgstr "" msgid "Error in regex" msgstr "" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "" @@ -924,7 +929,7 @@ msgstr "" msgid "FFT is implemented for linear arrays only" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "" @@ -1295,7 +1300,7 @@ msgstr "" msgid "Invalid size" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "" @@ -1303,10 +1308,6 @@ msgstr "" msgid "Invalid state" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "" @@ -1323,10 +1324,6 @@ msgstr "" msgid "Invalid word/bit length" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "" @@ -1450,9 +1447,14 @@ msgstr "" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c +#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c msgid "No DMA channel found" msgstr "" +#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c +msgid "No DMA pacing timer found" +msgstr "" + #: shared-module/adafruit_bus_device/I2CDevice.c #, c-format msgid "No I2C device at address: %x" @@ -1539,6 +1541,12 @@ msgstr "" msgid "No out in program" msgstr "" +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1647,7 +1655,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "" @@ -1722,6 +1730,10 @@ msgid "" "constructor" msgstr "" +#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c +msgid "Pins must share PWM slice" +msgstr "" + #: py/builtinhelp.c msgid "Plus any modules on the filesystem\n" msgstr "" @@ -1793,6 +1805,10 @@ msgstr "" msgid "RNG Init Error" msgstr "" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1800,6 +1816,7 @@ msgstr "" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "" @@ -1808,7 +1825,7 @@ msgid "RTC is not supported on this board" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" @@ -1865,12 +1882,6 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -#: ports/raspberrypi/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -1962,6 +1973,14 @@ msgstr "" msgid "Stack size must be at least 256" msgstr "" +#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c +msgid "Stereo left must be on PWM channel A" +msgstr "" + +#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c +msgid "Stereo right must be on PWM channel B" +msgstr "" + #: shared-bindings/multiterminal/__init__.c msgid "Stream missing readinto() or write() method." msgstr "" @@ -2125,6 +2144,7 @@ msgstr "" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c +#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c msgid "Unable to allocate buffers for signed conversion" msgstr "" @@ -2162,7 +2182,7 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" @@ -2461,7 +2481,7 @@ msgstr "" msgid "buffer too small" msgstr "" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "" @@ -3621,6 +3641,10 @@ msgstr "" msgid "pop from empty %q" msgstr "" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "" diff --git a/locale/cs.po b/locale/cs.po index 9181d1f70..b71c491c3 100644 --- a/locale/cs.po +++ b/locale/cs.po @@ -342,6 +342,10 @@ msgstr "" msgid "All event channels in use" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "" @@ -390,6 +394,7 @@ msgstr "" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "" @@ -589,6 +594,7 @@ msgstr "" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "" @@ -626,6 +632,10 @@ msgstr "" msgid "Cannot reset into bootloader because no bootloader is present." msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "" @@ -862,11 +872,12 @@ msgstr "" msgid "Error in regex" msgstr "" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -920,7 +931,7 @@ msgstr "" msgid "FFT is implemented for linear arrays only" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "" @@ -1048,6 +1059,10 @@ msgstr "" msgid "I2C Init Error" msgstr "" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "" @@ -1071,6 +1086,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "" @@ -1083,6 +1102,31 @@ msgstr "" msgid "Input/output error" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "" @@ -1134,7 +1178,7 @@ msgstr "" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "" @@ -1228,6 +1272,8 @@ msgstr "" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "" @@ -1256,7 +1302,7 @@ msgstr "" msgid "Invalid size" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "" @@ -1264,10 +1310,6 @@ msgstr "" msgid "Invalid state" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "" @@ -1284,10 +1326,6 @@ msgstr "" msgid "Invalid word/bit length" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "" @@ -1349,6 +1387,36 @@ msgstr "" msgid "Missing MISO or MOSI Pin" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" @@ -1402,14 +1470,14 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "" @@ -1466,6 +1534,16 @@ msgstr "" msgid "No network with that ssid" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1521,6 +1599,10 @@ msgstr "" msgid "Only 8 or 16 bit mono with " msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "" @@ -1570,7 +1652,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "" @@ -1593,6 +1675,7 @@ msgid "" msgstr "" #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "" @@ -1605,11 +1688,20 @@ msgstr "" msgid "Permission denied" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "" @@ -1670,10 +1762,34 @@ msgstr "" msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "" +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" @@ -1682,6 +1798,10 @@ msgstr "" msgid "RNG Init Error" msgstr "" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1689,6 +1809,7 @@ msgstr "" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "" @@ -1697,7 +1818,7 @@ msgid "RTC is not supported on this board" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" @@ -1754,11 +1875,6 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -1777,6 +1893,10 @@ msgstr "" msgid "SPI Re-initialization error" msgstr "" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "" @@ -1807,6 +1927,14 @@ msgstr "" msgid "Server side context cannot have hostname" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "" @@ -1971,6 +2099,10 @@ msgstr "" msgid "UART Re-init error" msgstr "" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "" @@ -2034,7 +2166,7 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" @@ -2075,7 +2207,8 @@ msgid "" msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "" @@ -2126,6 +2259,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" @@ -2331,7 +2465,7 @@ msgstr "" msgid "buffer too small" msgstr "" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "" @@ -3491,6 +3625,10 @@ msgstr "" msgid "pop from empty %q" msgstr "" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "" @@ -3507,6 +3645,7 @@ msgstr "" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3524,6 +3663,14 @@ msgstr "" msgid "pressing both buttons at start up.\n" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "" @@ -3727,6 +3874,7 @@ msgstr "" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" diff --git a/locale/de_DE.po b/locale/de_DE.po index 8d8f2d521..caaa28ced 100644 --- a/locale/de_DE.po +++ b/locale/de_DE.po @@ -6,14 +6,14 @@ msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2021-01-07 18:01+0000\n" -"Last-Translator: Dennis Schweer <dennis.schweer@ruhr-uni-bochum.de>\n" +"PO-Revision-Date: 2021-02-05 15:41+0000\n" +"Last-Translator: Jeff Epler <jepler@gmail.com>\n" "Language: de_DE\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" -"X-Generator: Weblate 4.4.1-dev\n" +"X-Generator: Weblate 4.5-dev\n" #: main.c msgid "" @@ -120,7 +120,8 @@ msgstr "%q sollte ein integer sein" #: py/bc.c py/objnamedtuple.c msgid "%q() takes %d positional arguments but %d were given" -msgstr "%q() nimmt %d Argumente ohne Keyword an, aber es wurden %d angegeben" +msgstr "" +"%q() nimmt %d Argumente ohne Schlüsselwort an, aber es wurden %d angegeben" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c #, c-format @@ -235,7 +236,7 @@ msgstr "'await' außerhalb einer Funktion" #: py/compile.c msgid "'await', 'async for' or 'async with' outside async function" -msgstr "" +msgstr "'await', 'async for' oder 'async with' außerhalb einer async Funktion" #: py/compile.c msgid "'break' outside loop" @@ -267,7 +268,7 @@ msgstr "'return' außerhalb einer Funktion" #: py/compile.c msgid "'yield from' inside async function" -msgstr "" +msgstr "'yield from' innerhalb einer async Funktion" #: py/compile.c msgid "'yield' outside function" @@ -313,7 +314,7 @@ msgstr "Adresstyp außerhalb des zulässigen Bereichs" #: ports/esp32s2/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" -msgstr "" +msgstr "Alle CAN Schnittstellen sind in Benutzung" #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" @@ -329,7 +330,7 @@ msgstr "Alle PCNT Einheiten sind in Benutzung" #: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" -msgstr "" +msgstr "Alle RX FIFOs sind in Benutzung" #: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c msgid "All SPI peripherals are in use" @@ -343,6 +344,10 @@ msgstr "Alle UART-Peripheriegeräte sind in Benutzung" msgid "All event channels in use" msgstr "Alle event Kanäle werden benutzt" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "Alle sync event Kanäle werden benutzt" @@ -391,6 +396,7 @@ msgstr "AnalogIn ist an diesem Pin nicht unterstützt" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "AnalogOut-Funktion wird nicht unterstützt" @@ -536,7 +542,7 @@ msgstr "Puffer zu groß und kann nicht reserviert werden" #: shared-bindings/_bleio/PacketBuffer.c #, c-format msgid "Buffer too short by %d bytes" -msgstr "Buffer um %d Bytes zu kurz" +msgstr "Puffer um %d Bytes zu kurz" #: ports/atmel-samd/common-hal/displayio/ParallelBus.c #: ports/esp32s2/common-hal/displayio/ParallelBus.c @@ -594,6 +600,7 @@ msgstr "Kann Werte nicht löschen" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "Pull up im Ausgabemodus nicht möglich" @@ -632,6 +639,10 @@ msgstr "Kann '/' nicht remounten when USB aktiv ist." msgid "Cannot reset into bootloader because no bootloader is present." msgstr "Reset zum bootloader nicht möglich da bootloader nicht vorhanden." +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "Der Wert kann nicht gesetzt werden, wenn die Richtung input ist." @@ -685,7 +696,7 @@ msgstr "" #: supervisor/shared/safe_mode.c msgid "CircuitPython was unable to allocate the heap.\n" -msgstr "" +msgstr "CircuitPython war es nicht möglich heap-Speicher zu allozieren.\n" #: shared-module/bitbangio/SPI.c msgid "Clock pin init failed." @@ -763,7 +774,7 @@ msgstr "PWM konnte nicht neu gestartet werden" #: ports/esp32s2/common-hal/neopixel_write/__init__.c msgid "Could not retrieve clock" -msgstr "" +msgstr "Clock konnte nicht ermittelt werden" #: shared-bindings/_bleio/Adapter.c msgid "Could not set address" @@ -801,7 +812,7 @@ msgstr "Absturz in den HardFault_Handler." #: ports/stm/common-hal/analogio/AnalogOut.c msgid "DAC Channel Init Error" -msgstr "DAC Kanal Intialisierungs Fehler" +msgstr "DAC Kanal Initialisierungsfehler" #: ports/stm/common-hal/analogio/AnalogOut.c msgid "DAC Device Init Error" @@ -874,11 +885,12 @@ msgstr "EXTINT Kanal ist schon in Benutzung" msgid "Error in regex" msgstr "Fehler in regex" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -933,7 +945,7 @@ msgstr "FFT ist nur für ndarrays definiert" msgid "FFT is implemented for linear arrays only" msgstr "FFT ist nur für lineare Arrays implementiert" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "SSL Handshake fehlgeschlagen" @@ -966,7 +978,7 @@ msgstr "Zuweisung des Wifi Speichers ist fehlgeschlagen" #: ports/esp32s2/common-hal/wifi/ScannedNetworks.c msgid "Failed to allocate wifi scan memory" -msgstr "" +msgstr "Zuweisung des Wifi Scan Speichers ist fehlgeschlagen" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: internal error" @@ -982,7 +994,7 @@ msgstr "Wifi Initialisierung ist fehlgeschlagen" #: shared-module/audiomp3/MP3Decoder.c msgid "Failed to parse MP3 file" -msgstr "Parsen der MP3 Datei fehlgeschlagen" +msgstr "MP3-Datei konnte nicht analysiert werden" #: ports/nrf/sd_mutex.c #, c-format @@ -1005,7 +1017,7 @@ msgstr "Filter zu komplex" #: ports/esp32s2/common-hal/dualbank/__init__.c msgid "Firmware image is invalid" -msgstr "" +msgstr "Firmware Image ist ungültig" #: ports/cxd56/common-hal/camera/Camera.c msgid "Format not supported" @@ -1063,6 +1075,10 @@ msgstr "Lese/Schreibe-operation an geschlossener Datei" msgid "I2C Init Error" msgstr "I2C-Init-Fehler" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "I2SOut nicht verfügbar" @@ -1088,6 +1104,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Inkorrekte Puffergröße" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "Initialisierung aufgrund von Speichermangel fehlgeschlagen" @@ -1100,6 +1120,31 @@ msgstr "" msgid "Input/output error" msgstr "Eingabe-/Ausgabefehler" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "Unzureichende Authentifizierung" @@ -1151,7 +1196,7 @@ msgstr "Ungültiger DAC-Pin angegeben" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "Ungültige PWM Frequenz" @@ -1245,6 +1290,8 @@ msgstr "Ungültiger Pin für rechten Kanal" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "Ungültige Pins" @@ -1273,7 +1320,7 @@ msgstr "Ungültiger security_mode" msgid "Invalid size" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "" @@ -1281,10 +1328,6 @@ msgstr "" msgid "Invalid state" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "Ungültige Stimme" @@ -1301,10 +1344,6 @@ msgstr "Ungültige wave Datei" msgid "Invalid word/bit length" msgstr "Ungültige Wort- / Bitlänge" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "Der Schlüssel muss 16, 24 oder 32 Byte lang sein" @@ -1368,6 +1407,36 @@ msgstr "" msgid "Missing MISO or MOSI Pin" msgstr "Fehlender MISO- oder MOSI-Pin" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "Muss eine %q Unterklasse sein." @@ -1421,14 +1490,14 @@ msgstr "Kein MOSI Pin" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Kein RX Pin" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Kein TX Pin" @@ -1485,6 +1554,16 @@ msgstr "An diesem Pin sind keine Timer mehr verfügbar." msgid "No network with that ssid" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Kein Pulldown Widerstand am Pin; 1Mohm wird vorgeschlagen" @@ -1542,6 +1621,10 @@ msgstr "Eine ungerade Parität wird nicht unterstützt" msgid "Only 8 or 16 bit mono with " msgstr "Nur 8 oder 16 bit mono mit " +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "" @@ -1595,7 +1678,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "" @@ -1618,6 +1701,7 @@ msgid "" msgstr "Die PWM-Frequenz ist nicht schreibbar wenn variable_Frequenz = False." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "ParallelBus wird noch nicht unterstützt" @@ -1630,11 +1714,20 @@ msgstr "" msgid "Permission denied" msgstr "Zugang verweigert" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Pin hat keine ADC Funktionalität" @@ -1698,10 +1791,34 @@ msgstr "" msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Pull wird nicht verwendet, wenn die Richtung output ist." +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "RNG DeInit-Fehler" @@ -1710,6 +1827,10 @@ msgstr "RNG DeInit-Fehler" msgid "RNG Init Error" msgstr "RNG Init Fehler" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1717,6 +1838,7 @@ msgstr "RS485-Inversion angegeben, wenn nicht im RS485-Modus" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "Die RTC-Kalibrierung wird auf diesem Board nicht unterstützt" @@ -1725,7 +1847,7 @@ msgid "RTC is not supported on this board" msgstr "Eine RTC wird auf diesem Board nicht unterstützt" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "RTS / CTS / RS485 Wird von diesem Gerät noch nicht unterstützt" @@ -1782,11 +1904,6 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "SDA oder SCL brauchen pull up" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -1805,6 +1922,10 @@ msgstr "SPI-Init-Fehler" msgid "SPI Re-initialization error" msgstr "SPI-Neuinitialisierungsfehler" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "Abtastrate muss positiv sein" @@ -1835,6 +1956,14 @@ msgstr "Serializer wird benutzt" msgid "Server side context cannot have hostname" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "" @@ -2013,6 +2142,10 @@ msgstr "UART Init Fehler" msgid "UART Re-init error" msgstr "UART Re-Init-Fehler" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "UART-Schreibfehler" @@ -2076,7 +2209,7 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "Unerwarteter nrfx uuid-Typ" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" @@ -2121,7 +2254,8 @@ msgstr "" "Eingabeaufforderung auf dem anderen Gerät abgelehnt oder ignoriert." #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Baudrate wird nicht unterstützt" @@ -2173,6 +2307,7 @@ msgstr "" "WARNUNG: Der Dateiname deines Programms hat zwei Dateityperweiterungen\n" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" @@ -2388,7 +2523,7 @@ msgstr "Puffersegmente müssen gleich lang sein" msgid "buffer too small" msgstr "Der Puffer ist zu klein" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "" @@ -2769,7 +2904,7 @@ msgstr "erwarte tuple/list" #: py/modthread.c msgid "expecting a dict for keyword args" -msgstr "erwarte ein dict als Keyword-Argumente" +msgstr "erwarte ein dict als Schlüsselwort-Argumente" #: py/compile.c msgid "expecting an assembler instruction" @@ -2789,11 +2924,11 @@ msgstr "" #: py/argcheck.c msgid "extra keyword arguments given" -msgstr "Es wurden zusätzliche Keyword-Argumente angegeben" +msgstr "Es wurden zusätzliche Schlüsselwort-Argumente angegeben" #: py/argcheck.c msgid "extra positional arguments given" -msgstr "Es wurden zusätzliche Argumente ohne Keyword angegeben" +msgstr "Es wurden zusätzliche Argumente ohne Schlüsselwort angegeben" #: py/parse.c msgid "f-string expression part cannot include a '#'" @@ -2874,7 +3009,7 @@ msgstr "voll" #: py/argcheck.c msgid "function does not take keyword arguments" -msgstr "Funktion akzeptiert keine Keyword-Argumente" +msgstr "Funktion akzeptiert keine Schlüsselwort-Argumente" #: py/argcheck.c #, c-format @@ -2896,26 +3031,27 @@ msgstr "" #: py/argcheck.c #, c-format msgid "function missing %d required positional arguments" -msgstr "Funktion vermisst %d benötigte Argumente ohne Keyword" +msgstr "Funktion vermisst %d benötigte Argumente ohne Schlüsselwort" #: py/bc.c msgid "function missing keyword-only argument" -msgstr "Funktion vermisst Keyword-only-Argument" +msgstr "Funktion vermisst Nur-Schlüsselwort-Argument" #: py/bc.c msgid "function missing required keyword argument '%q'" -msgstr "Funktion vermisst benötigtes Keyword-Argumente '%q'" +msgstr "Funktion vermisst benötigtes Schlüsselwort-Argumente '%q'" #: py/bc.c #, c-format msgid "function missing required positional argument #%d" -msgstr "Funktion vermisst benötigtes Argumente ohne Keyword #%d" +msgstr "Funktion vermisst benötigtes Argumente ohne Schlüsselwort #%d" #: py/argcheck.c py/bc.c py/objnamedtuple.c shared-bindings/time/__init__.c #, c-format msgid "function takes %d positional arguments but %d were given" msgstr "" -"Funktion nimmt %d Argumente ohne Keyword an, aber es wurden %d angegeben" +"Funktion nimmt %d Argumente ohne Schlüsselwort an, aber es wurden %d " +"angegeben" #: shared-bindings/time/__init__.c msgid "function takes exactly 9 arguments" @@ -3145,8 +3281,8 @@ msgstr "" #: py/argcheck.c msgid "keyword argument(s) not yet implemented - use normal args instead" msgstr "" -"Keyword-Argument(e) noch nicht implementiert - verwenden Sie stattdessen " -"normale Argumente" +"Schlüsselwort-Argument(e) noch nicht implementiert - verwenden Sie " +"stattdessen normale Argumente" #: py/bc.c msgid "keywords must be strings" @@ -3571,6 +3707,10 @@ msgstr "pop von einem leeren PulseIn" msgid "pop from empty %q" msgstr "" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "pow() drittes Argument darf nicht 0 sein" @@ -3587,6 +3727,7 @@ msgstr "pow () mit 3 Argumenten erfordert Integer" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3604,6 +3745,14 @@ msgstr "" msgid "pressing both buttons at start up.\n" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "Warteschlangenüberlauf" @@ -3810,6 +3959,7 @@ msgstr "time.struct_time() nimmt eine 9-Sequenz an" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "Das Zeitlimit hat den maximal zulässigen Wert überschritten" @@ -3926,11 +4076,11 @@ msgstr "" #: py/bc.c msgid "unexpected keyword argument" -msgstr "unerwartetes Keyword-Argument" +msgstr "unerwartetes Schlüsselwort-Argument" #: py/bc.c py/objnamedtuple.c msgid "unexpected keyword argument '%q'" -msgstr "unerwartetes Keyword-Argument '%q'" +msgstr "unerwartetes Schlüsselwort-Argument '%q'" #: py/lexer.c msgid "unicode name escapes" @@ -4096,6 +4246,9 @@ msgstr "" msgid "zi must be of shape (n_section, 2)" msgstr "" +#~ msgid "SDA or SCL needs a pull up" +#~ msgstr "SDA oder SCL brauchen pull up" + #~ msgid "%d address pins and %d rgb pins indicate a height of %d, not %d" #~ msgstr "" #~ "%d Adress-Pins und %d rgb-Pins zeigen eine Höhe von %d, nicht von %d" diff --git a/locale/el.po b/locale/el.po index 04b63261e..bf03a5d82 100644 --- a/locale/el.po +++ b/locale/el.po @@ -339,6 +339,10 @@ msgstr "" msgid "All event channels in use" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "" @@ -387,6 +391,7 @@ msgstr "" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "" @@ -586,6 +591,7 @@ msgstr "" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "" @@ -623,6 +629,10 @@ msgstr "" msgid "Cannot reset into bootloader because no bootloader is present." msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "" @@ -859,11 +869,12 @@ msgstr "" msgid "Error in regex" msgstr "" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -917,7 +928,7 @@ msgstr "" msgid "FFT is implemented for linear arrays only" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "" @@ -1045,6 +1056,10 @@ msgstr "" msgid "I2C Init Error" msgstr "" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "" @@ -1068,6 +1083,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "" @@ -1080,6 +1099,31 @@ msgstr "" msgid "Input/output error" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "" @@ -1131,7 +1175,7 @@ msgstr "" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "" @@ -1225,6 +1269,8 @@ msgstr "" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "" @@ -1253,7 +1299,7 @@ msgstr "" msgid "Invalid size" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "" @@ -1261,10 +1307,6 @@ msgstr "" msgid "Invalid state" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "" @@ -1281,10 +1323,6 @@ msgstr "" msgid "Invalid word/bit length" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "" @@ -1346,6 +1384,36 @@ msgstr "" msgid "Missing MISO or MOSI Pin" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" @@ -1399,14 +1467,14 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "" @@ -1463,6 +1531,16 @@ msgstr "" msgid "No network with that ssid" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1518,6 +1596,10 @@ msgstr "" msgid "Only 8 or 16 bit mono with " msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "" @@ -1567,7 +1649,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "" @@ -1590,6 +1672,7 @@ msgid "" msgstr "" #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "" @@ -1602,11 +1685,20 @@ msgstr "" msgid "Permission denied" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "" @@ -1667,10 +1759,34 @@ msgstr "" msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "" +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" @@ -1679,6 +1795,10 @@ msgstr "" msgid "RNG Init Error" msgstr "" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1686,6 +1806,7 @@ msgstr "" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "" @@ -1694,7 +1815,7 @@ msgid "RTC is not supported on this board" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" @@ -1751,11 +1872,6 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -1774,6 +1890,10 @@ msgstr "" msgid "SPI Re-initialization error" msgstr "" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "" @@ -1804,6 +1924,14 @@ msgstr "" msgid "Server side context cannot have hostname" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "" @@ -1968,6 +2096,10 @@ msgstr "" msgid "UART Re-init error" msgstr "" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "" @@ -2031,7 +2163,7 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" @@ -2072,7 +2204,8 @@ msgid "" msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "" @@ -2123,6 +2256,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" @@ -2328,7 +2462,7 @@ msgstr "" msgid "buffer too small" msgstr "" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "" @@ -3488,6 +3622,10 @@ msgstr "" msgid "pop from empty %q" msgstr "" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "" @@ -3504,6 +3642,7 @@ msgstr "" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3521,6 +3660,14 @@ msgstr "" msgid "pressing both buttons at start up.\n" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "" @@ -3724,6 +3871,7 @@ msgstr "" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" diff --git a/locale/es.po b/locale/es.po index 29b238768..fbde0ce37 100644 --- a/locale/es.po +++ b/locale/es.po @@ -8,27 +8,31 @@ msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2020-12-30 22:25+0000\n" -"Last-Translator: Hugo Dahl <hugo@code-jedi.com>\n" +"PO-Revision-Date: 2021-02-08 21:21+0000\n" +"Last-Translator: Alvaro Figueroa <alvaro@greencore.co.cr>\n" "Language-Team: \n" "Language: es\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" -"X-Generator: Weblate 4.4.1-dev\n" +"X-Generator: Weblate 4.5-dev\n" #: main.c msgid "" "\n" "Code done running.\n" msgstr "" +"\n" +"El código terminó de ejecutar.\n" #: main.c msgid "" "\n" "Code stopped by auto-reload.\n" msgstr "" +"\n" +"El código fue detenido por el auto-reiniciado.\n" #: supervisor/shared/safe_mode.c msgid "" @@ -50,7 +54,7 @@ msgstr " Archivo \"%q\", línea %d" #: py/builtinhelp.c msgid " is of type %q\n" -msgstr "" +msgstr " es de tipo %q\n" #: main.c msgid " output:\n" @@ -126,7 +130,7 @@ msgstr "%q() toma %d argumentos posicionales pero %d fueron dados" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c #, c-format msgid "%s error 0x%x" -msgstr "" +msgstr "%s error 0x%x" #: py/argcheck.c msgid "'%q' argument required" @@ -292,7 +296,7 @@ msgstr "pow() con 3 argumentos no soportado" #: shared-module/msgpack/__init__.c msgid "64 bit types" -msgstr "" +msgstr "tipos de 64 bit" #: ports/atmel-samd/common-hal/countio/Counter.c #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c @@ -344,6 +348,10 @@ msgstr "Todos los periféricos UART están siendo usados" msgid "All event channels in use" msgstr "Todos los canales de eventos estan siendo usados" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "Todas las máquinas de estado en uso" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "" @@ -394,6 +402,7 @@ msgstr "El pin proporcionado no soporta AnalogIn" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "Funcionalidad AnalogOut no soportada" @@ -562,7 +571,7 @@ msgstr "Los bloques CBC deben ser múltiplos de 16 bytes" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "CRC or checksum was invalid" -msgstr "" +msgstr "CRC o suma de comprobación inválida" #: py/objtype.c msgid "Call super().__init__() before accessing native object." @@ -597,6 +606,7 @@ msgstr "No se puede eliminar valores" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "No puede ser pull mientras este en modo de salida" @@ -636,6 +646,10 @@ msgstr "No se puede volver a montar '/' cuando el USB esta activo." msgid "Cannot reset into bootloader because no bootloader is present." msgstr "No se puede reiniciar a bootloader porque no hay bootloader presente." +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "No se pueden definir opciones para enchufe" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "No se puede asignar un valor cuando la dirección es input." @@ -876,11 +890,12 @@ msgstr "El canal EXTINT ya está siendo utilizado" msgid "Error in regex" msgstr "Error en regex" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -934,7 +949,7 @@ msgstr "FFT se define solo para ndarrays" msgid "FFT is implemented for linear arrays only" msgstr "FFT solo esta implementado para arrays lineales" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "Fallo en saludo SSL" @@ -1006,7 +1021,7 @@ msgstr "Filtros muy complejos" #: ports/esp32s2/common-hal/dualbank/__init__.c msgid "Firmware image is invalid" -msgstr "" +msgstr "La imagen de firmware es inválida" #: ports/cxd56/common-hal/camera/Camera.c msgid "Format not supported" @@ -1029,7 +1044,7 @@ msgstr "La función requiere lock" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Generic Failure" -msgstr "" +msgstr "Fallo Genérico" #: shared-bindings/displayio/Display.c #: shared-bindings/displayio/EPaperDisplay.c @@ -1063,6 +1078,10 @@ msgstr "Operación I/O en archivo cerrado" msgid "I2C Init Error" msgstr "I2C Error de inicio" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "Dispositivo I2C en uso" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "I2SOut no disponible" @@ -1088,6 +1107,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Tamaño incorrecto del buffer" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "Inicializacion fallida por falta de memoria" @@ -1100,6 +1123,31 @@ msgstr "La entrada está durando mucho tiempo" msgid "Input/output error" msgstr "error Input/output" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "Autenticación insuficiente" @@ -1151,7 +1199,7 @@ msgstr "Pin suministrado inválido para DAC" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "Frecuencia PWM inválida" @@ -1245,6 +1293,8 @@ msgstr "Pin inválido para canal derecho" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "pines inválidos" @@ -1273,7 +1323,7 @@ msgstr "'security_mode' no válido" msgid "Invalid size" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "" @@ -1281,10 +1331,6 @@ msgstr "" msgid "Invalid state" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "Voz inválida" @@ -1301,10 +1347,6 @@ msgstr "Archivo wave inválido" msgid "Invalid word/bit length" msgstr "Tamaño no válido de palabra/bit" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "La llave debe tener 16, 24 o 32 bytes de longitud" @@ -1366,6 +1408,36 @@ msgstr "Micrófono demora de inicio debe estar en el rango 0.0 a 1.0" msgid "Missing MISO or MOSI Pin" msgstr "Falta el pin MISO o MOSI" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "Debe de ser una subclase de %q." @@ -1419,14 +1491,14 @@ msgstr "Sin pin MOSI" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Sin pin RX" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Sin pin TX" @@ -1483,6 +1555,16 @@ msgstr "No hay más temporizadores disponibles en este pin." msgid "No network with that ssid" msgstr "No hay una red con ese ssid" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "No hay pulldown en el pin; 1Mohm recomendado" @@ -1540,6 +1622,10 @@ msgstr "Paridad impar no soportada" msgid "Only 8 or 16 bit mono with " msgstr "Solo mono de 8 ó 16 bit con " +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "Solo hay capacidad para direcciones IPv4" @@ -1593,7 +1679,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "Se acabaron los enchufes" @@ -1618,6 +1704,7 @@ msgstr "" "construcción." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "ParallelBus todavía no soportado" @@ -1630,11 +1717,20 @@ msgstr "" msgid "Permission denied" msgstr "Permiso denegado" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Pin no tiene capacidad ADC" @@ -1702,10 +1798,34 @@ msgstr "" msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Pull no se usa cuando la dirección es output." +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "Error de desinicialización de RNG" @@ -1714,6 +1834,10 @@ msgstr "Error de desinicialización de RNG" msgid "RNG Init Error" msgstr "Error de inicialización de RNG" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1721,6 +1845,7 @@ msgstr "Se especifica inversión de RS485 si no está en modo RS485" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "Calibración de RTC no es soportada en esta placa" @@ -1729,7 +1854,7 @@ msgid "RTC is not supported on this board" msgstr "RTC no soportado en esta placa" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "Sin capacidad de RTS/CTS/RS485 para este dispositivo" @@ -1786,11 +1911,6 @@ msgstr "¡Corriendo en modo seguro! " msgid "SD card CSD format not supported" msgstr "Sin capacidad para formato CSD para tarjeta SD" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "SDA o SCL necesitan una pull up" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -1809,6 +1929,10 @@ msgstr "Error de inicio de SPI" msgid "SPI Re-initialization error" msgstr "Error de reinicialización de SPI" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "Sample rate debe ser positivo" @@ -1839,6 +1963,14 @@ msgstr "Serializer está siendo utilizado" msgid "Server side context cannot have hostname" msgstr "El contexto del lado del servidor no puede tener un hostname" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "Sin capacidades para el tamaño" @@ -2017,6 +2149,10 @@ msgstr "Error de inicialización de UART" msgid "UART Re-init error" msgstr "Error de reinicialización de UART" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "Error de escritura UART" @@ -2080,7 +2216,7 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "Tipo de uuid nrfx inesperado" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "Error no manejado de ESP TLS %d %d %x %d" @@ -2123,7 +2259,8 @@ msgstr "" "dispositivo fue denegada o ignorada." #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Baudrate no soportado" @@ -2174,6 +2311,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "ADVERTENCIA: El nombre de archivo de tu código tiene dos extensiones\n" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" "WatchDogTimer no se puede desinicializar luego de definirse en modo RESET" @@ -2388,7 +2526,7 @@ msgstr "Las secciones del buffer necesitan tener longitud igual" msgid "buffer too small" msgstr "buffer demasiado pequeño" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "búfer muy pequeño para los bytes solicitados" @@ -3561,6 +3699,10 @@ msgstr "pop de un PulseIn vacío" msgid "pop from empty %q" msgstr "pop desde %q vacía" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "el 3er argumento de pow() no puede ser 0" @@ -3577,6 +3719,7 @@ msgstr "pow() con 3 argumentos requiere enteros" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3594,6 +3737,14 @@ msgstr "presionando botón de arranque al inicio.\n" msgid "pressing both buttons at start up.\n" msgstr "presionando ambos botones al inicio.\n" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "desbordamiento de cola(queue)" @@ -3799,6 +3950,7 @@ msgstr "time.struct_time() toma un sequencio 9" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" "la duración de tiempo de espera ha excedido la capacidad máxima del valor" @@ -4082,6 +4234,9 @@ msgstr "zi debe ser de tipo flotante" msgid "zi must be of shape (n_section, 2)" msgstr "zi debe ser una forma (n_section,2)" +#~ msgid "SDA or SCL needs a pull up" +#~ msgstr "SDA o SCL necesitan una pull up" + #~ msgid "%d address pins and %d rgb pins indicate a height of %d, not %d" #~ msgstr "" #~ "%d pines de dirección y %d pines rgb indican una altura de %d, no de %d" diff --git a/locale/fil.po b/locale/fil.po index 2fdcd2f04..b030bd5c8 100644 --- a/locale/fil.po +++ b/locale/fil.po @@ -342,6 +342,10 @@ msgstr "Lahat ng I2C peripherals ginagamit" msgid "All event channels in use" msgstr "Lahat ng event channels ginagamit" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "Lahat ng sync event channels ay ginagamit" @@ -390,6 +394,7 @@ msgstr "" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "Hindi supportado ang AnalogOut" @@ -592,6 +597,7 @@ msgstr "Hindi mabura ang values" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "Hindi makakakuha ng pull habang nasa output mode" @@ -630,6 +636,10 @@ msgstr "Hindi ma-remount '/' kapag aktibo ang USB." msgid "Cannot reset into bootloader because no bootloader is present." msgstr "Hindi ma-reset sa bootloader dahil walang bootloader." +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "Hindi ma i-set ang value kapag ang direksyon ay input." @@ -870,11 +880,12 @@ msgstr "Ginagamit na ang EXTINT channel" msgid "Error in regex" msgstr "May pagkakamali sa REGEX" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -930,7 +941,7 @@ msgstr "" msgid "FFT is implemented for linear arrays only" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "" @@ -1058,6 +1069,10 @@ msgstr "I/O operasyon sa saradong file" msgid "I2C Init Error" msgstr "" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "" @@ -1083,6 +1098,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "" @@ -1095,6 +1114,31 @@ msgstr "" msgid "Input/output error" msgstr "May mali sa Input/Output" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "" @@ -1146,7 +1190,7 @@ msgstr "" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "Mali ang PWM frequency" @@ -1240,6 +1284,8 @@ msgstr "Mali ang pin para sa kanang channel" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "Mali ang pins" @@ -1268,7 +1314,7 @@ msgstr "" msgid "Invalid size" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "" @@ -1276,10 +1322,6 @@ msgstr "" msgid "Invalid state" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "" @@ -1296,10 +1338,6 @@ msgstr "May hindi tama sa wave file" msgid "Invalid word/bit length" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "" @@ -1361,6 +1399,36 @@ msgstr "Ang delay ng startup ng mikropono ay dapat na nasa 0.0 hanggang 1.0" msgid "Missing MISO or MOSI Pin" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" @@ -1414,14 +1482,14 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Walang RX pin" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Walang TX pin" @@ -1478,6 +1546,16 @@ msgstr "" msgid "No network with that ssid" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1536,6 +1614,10 @@ msgstr "Odd na parity ay hindi supportado" msgid "Only 8 or 16 bit mono with " msgstr "Tanging 8 o 16 na bit mono na may " +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "" @@ -1585,7 +1667,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "" @@ -1609,6 +1691,7 @@ msgstr "" "PWM frequency hindi writable kapag variable_frequency ay False sa pag buo." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "" @@ -1621,11 +1704,20 @@ msgstr "" msgid "Permission denied" msgstr "Walang pahintulot" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Ang pin ay walang kakayahan sa ADC" @@ -1686,10 +1778,34 @@ msgstr "" msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Pull hindi ginagamit kapag ang direksyon ay output." +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" @@ -1698,6 +1814,10 @@ msgstr "" msgid "RNG Init Error" msgstr "" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1705,6 +1825,7 @@ msgstr "" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "RTC calibration ay hindi supportado ng board na ito" @@ -1713,7 +1834,7 @@ msgid "RTC is not supported on this board" msgstr "Hindi supportado ang RTC sa board na ito" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" @@ -1771,11 +1892,6 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "Kailangan ng pull up resistors ang SDA o SCL" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -1794,6 +1910,10 @@ msgstr "" msgid "SPI Re-initialization error" msgstr "" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "Sample rate ay dapat positibo" @@ -1824,6 +1944,14 @@ msgstr "Serializer ginagamit" msgid "Server side context cannot have hostname" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "" @@ -1988,6 +2116,10 @@ msgstr "" msgid "UART Re-init error" msgstr "" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "" @@ -2052,7 +2184,7 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "hindi inaasahang indent" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" @@ -2093,7 +2225,8 @@ msgid "" msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Hindi supportadong baudrate" @@ -2147,6 +2280,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "BABALA: Ang pangalan ng file ay may dalawang extension\n" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" @@ -2359,7 +2493,7 @@ msgstr "aarehas na haba dapat ang buffer slices" msgid "buffer too small" msgstr "masyadong maliit ang buffer" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "" @@ -3537,6 +3671,10 @@ msgstr "pop mula sa walang laman na PulseIn" msgid "pop from empty %q" msgstr "" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "pow() 3rd argument ay hindi maaring 0" @@ -3553,6 +3691,7 @@ msgstr "pow() na may 3 argumento kailangan ng integers" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3570,6 +3709,14 @@ msgstr "" msgid "pressing both buttons at start up.\n" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "puno na ang pila (overflow)" @@ -3776,6 +3923,7 @@ msgstr "time.struct_time() kumukuha ng 9-sequence" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" @@ -4061,6 +4209,9 @@ msgstr "" msgid "zi must be of shape (n_section, 2)" msgstr "" +#~ msgid "SDA or SCL needs a pull up" +#~ msgstr "Kailangan ng pull up resistors ang SDA o SCL" + #~ msgid "tuple index out of range" #~ msgstr "indeks ng tuple wala sa sakop" diff --git a/locale/fr.po b/locale/fr.po index 1842d6d3e..ed7c12486 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -8,8 +8,8 @@ msgstr "" "Project-Id-Version: 0.1\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2021-01-17 12:55+0000\n" -"Last-Translator: Hugo Dahl <hugo@code-jedi.com>\n" +"PO-Revision-Date: 2021-01-30 02:32+0000\n" +"Last-Translator: Antonin ENFRUN <antonin.e@me.com>\n" "Language: fr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" @@ -54,7 +54,7 @@ msgstr " Fichier \"%q\", ligne %d" #: py/builtinhelp.c msgid " is of type %q\n" -msgstr "" +msgstr " est de type %q\n" #: main.c msgid " output:\n" @@ -70,6 +70,8 @@ msgstr "%%c nécessite un chiffre entier 'int' ou un caractère 'char'" msgid "" "%d address pins, %d rgb pins and %d tiles indicate a height of %d, not %d" msgstr "" +"%d broches d'adresse, %d broches RGB et %d pour tile indique une hauteur de " +"%d, et non %d" #: ports/atmel-samd/common-hal/sdioio/SDCard.c msgid "%q failure: %d" @@ -348,6 +350,10 @@ msgstr "Tous les périphériques UART sont utilisés" msgid "All event channels in use" msgstr "Tous les canaux d'événements sont utilisés" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "Tous les canaux d'événements sync (sync event channels) sont utilisés" @@ -396,6 +402,7 @@ msgstr "'AnalogOut' n'est pas supporté sur la broche indiquée" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "Fonctionnalité AnalogOut non supportée" @@ -606,6 +613,7 @@ msgstr "Impossible de supprimer les valeurs" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "Ne peut être tiré ('pull') en mode sortie ('output')" @@ -646,6 +654,10 @@ msgid "Cannot reset into bootloader because no bootloader is present." msgstr "" "Ne peut être redémarré vers le bootloader car il n'y a pas de bootloader." +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "" @@ -832,7 +844,7 @@ msgstr "La broche 'Data 0' doit être aligné sur l'octet" #: ports/esp32s2/common-hal/displayio/ParallelBus.c msgid "Data 0 pin must be byte aligned." -msgstr "" +msgstr "La broche Data 0 doit être aligné sur l'octet." #: shared-module/audiocore/WaveFile.c msgid "Data chunk must follow fmt chunk" @@ -889,11 +901,12 @@ msgstr "Canal EXTINT déjà utilisé" msgid "Error in regex" msgstr "Erreur dans l'expression régulière" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" -msgstr "" +msgstr "Erreur : Impossible de lier" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -948,7 +961,7 @@ msgstr "La FFT est définie uniquement pour les ndarrays" msgid "FFT is implemented for linear arrays only" msgstr "FFT n'est implémenté que pour les tableaux linéaires" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "Échec du handshake SSL" @@ -1078,6 +1091,10 @@ msgstr "Opération d'E/S sur un fichier fermé" msgid "I2C Init Error" msgstr "Erreur d'initialisation I2C" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "I2SOut n'est pas disponible" @@ -1103,6 +1120,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Taille de tampon incorrecte" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "Échec d'initialisation par manque de mémoire" @@ -1115,6 +1136,31 @@ msgstr "L'entrée prend trop de temps" msgid "Input/output error" msgstr "Erreur d'entrée/sortie" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "Authentification insuffisante" @@ -1166,7 +1212,7 @@ msgstr "Broche DAC non valide fournie" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "Fréquence de PWM invalide" @@ -1260,6 +1306,8 @@ msgstr "Broche invalide pour le canal droit" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "Broches invalides" @@ -1288,18 +1336,14 @@ msgstr "'security_mode' invalide" msgid "Invalid size" msgstr "Taille invalide" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" -msgstr "" +msgstr "Socket non valide pour TLS" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Invalid state" msgstr "État invalide" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "Voix invalide" @@ -1316,10 +1360,6 @@ msgstr "Fichier WAVE invalide" msgid "Invalid word/bit length" msgstr "Longueur de mot / bit invalide" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "La clé doit comporter 16, 24 ou 32 octets" @@ -1381,6 +1421,36 @@ msgstr "Le délais au démarrage du micro doit être entre 0.0 et 1.0" msgid "Missing MISO or MOSI Pin" msgstr "Broche MISO ou MOSI manquante" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "Doit être une sous-classe de %q." @@ -1434,14 +1504,14 @@ msgstr "Pas de broche MOSI" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Pas de broche RX" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Pas de broche TX" @@ -1498,6 +1568,16 @@ msgstr "Plus de minuteurs disponibles sur cette broche." msgid "No network with that ssid" msgstr "Aucun réseau avec ce ssid" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Pas de pulldown sur la broche ; 1Mohm recommandé" @@ -1555,6 +1635,10 @@ msgstr "Parité impaire non supportée" msgid "Only 8 or 16 bit mono with " msgstr "Uniquement 8 ou 16 bit mono avec " +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "Seulement les adresses IPv4 sont supportées" @@ -1608,7 +1692,7 @@ msgstr "Timeout de l'opération" msgid "Out of memory" msgstr "Hors de mémoire" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "Plus de sockets" @@ -1635,6 +1719,7 @@ msgstr "" "à la construction." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "ParallelBus pas encore supporté" @@ -1647,11 +1732,20 @@ msgstr "Périphérique en utilisation" msgid "Permission denied" msgstr "Permission refusée" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "La broche 'pin' ne supporte pas les capacitées ADC" @@ -1722,10 +1816,34 @@ msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" "Feinte de someil profond jusqu'à l'alarme, CTRL-C ou écriture au fichier.\n" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Le tirage 'pull' n'est pas utilisé quand la direction est 'output'." +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "Erreur de désinitiation du RNG (RNG DeInit)" @@ -1734,6 +1852,10 @@ msgstr "Erreur de désinitiation du RNG (RNG DeInit)" msgid "RNG Init Error" msgstr "Erreur d'initialisation du RNG (RNG Init)" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1741,6 +1863,7 @@ msgstr "Inversion RS485 spécifiée sans être en mode RS485" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "La calibration du RTC non supportée sur cette carte" @@ -1749,7 +1872,7 @@ msgid "RTC is not supported on this board" msgstr "RTC non supporté sur cette carte" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "RTS / CTS / RS485 Pas encore supporté sur cet appareil" @@ -1806,11 +1929,6 @@ msgstr "Exécution en mode sécurisé! " msgid "SD card CSD format not supported" msgstr "Le format de carte SD CSD n'est pas supporté" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "SDA ou SCL a besoin d'une résistance de tirage ('pull up')" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -1829,6 +1947,10 @@ msgstr "Erreur d'initialisation SPI" msgid "SPI Re-initialization error" msgstr "Erreur de réinitialisation SPI" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "Le taux d'échantillonage doit être positif" @@ -1859,6 +1981,14 @@ msgstr "Sérialiseur en cours d'utilisation" msgid "Server side context cannot have hostname" msgstr "Un contexte niveau serveur ne peut avoir de hostname" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "Taille n'est pas supportée" @@ -2035,6 +2165,10 @@ msgstr "Erreur d'initialisation UART" msgid "UART Re-init error" msgstr "Erreur de réinitialisation UART" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "Erreur d'écriture UART" @@ -2101,7 +2235,7 @@ msgstr "Écriture impossible vers sleep_memory." msgid "Unexpected nrfx uuid type" msgstr "Type inattendu pour l'uuid nrfx" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "Erreur ESP TLS non gérée %d %d %x %d" @@ -2145,7 +2279,8 @@ msgstr "" "appareil ait été refusée ou ignorée." #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Débit en bauds non supporté" @@ -2197,6 +2332,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "ATTENTION : le nom de fichier de votre code a deux extensions\n" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" "WatchDogTimer ne peut pas être désinitialisé une fois que le mode est réglé " @@ -2411,7 +2547,7 @@ msgstr "les tranches de tampon doivent être de longueurs égales" msgid "buffer too small" msgstr "tampon trop petit" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "tampon trop petit pour le nombre d'octets demandé" @@ -3423,7 +3559,7 @@ msgstr "le nombre de points doit être d'au moins 2" #: py/builtinhelp.c msgid "object " -msgstr "" +msgstr "objet " #: py/obj.c msgid "object '%q' is not a tuple or list" @@ -3596,6 +3732,10 @@ msgstr "'pop' d'une entrée PulseIn vide" msgid "pop from empty %q" msgstr "pop sur %q vide" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "le 3e argument de pow() ne peut être 0" @@ -3612,6 +3752,7 @@ msgstr "pow() avec 3 arguments nécessite des entiers" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3629,6 +3770,14 @@ msgstr "bouton boot appuyé lors du démarrage.\n" msgid "pressing both buttons at start up.\n" msgstr "les deux boutons appuyés lors du démarrage.\n" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "dépassement de file" @@ -3827,7 +3976,7 @@ msgstr "le seuil doit être dans la portée 0-65536" #: shared-bindings/rgbmatrix/RGBMatrix.c msgid "tile must be greater than zero" -msgstr "" +msgstr "tile doit être plus que zéro" #: shared-bindings/time/__init__.c msgid "time.struct_time() takes a 9-sequence" @@ -3835,6 +3984,7 @@ msgstr "time.struct_time() prend une séquence de longueur 9" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "le délai d'expiration a dépassé la valeur maximale prise en charge" @@ -4047,11 +4197,11 @@ msgstr "watchdog timeout doit être supérieur à 0" #: shared-bindings/rgbmatrix/RGBMatrix.c msgid "width must be greater than zero" -msgstr "width doit être plus grand que zero" +msgstr "width doit être plus que zero" #: ports/esp32s2/common-hal/wifi/Radio.c msgid "wifi is not enabled" -msgstr "" +msgstr "wifi n’est pas activé" #: shared-bindings/_bleio/Adapter.c msgid "window must be <= interval" @@ -4117,6 +4267,15 @@ msgstr "zi doit être de type float" msgid "zi must be of shape (n_section, 2)" msgstr "zi doit être de forme (n_section, 2)" +#~ msgid "SDA or SCL needs a pull up" +#~ msgstr "SDA ou SCL a besoin d'une résistance de tirage ('pull up')" + +#~ msgid "Invalid use of TLS Socket" +#~ msgstr "Utilisation incorrecte de socket TLS" + +#~ msgid "Issue setting SO_REUSEADDR" +#~ msgstr "Problème en activant SO_REUSEADDR" + #~ msgid "%d address pins and %d rgb pins indicate a height of %d, not %d" #~ msgstr "" #~ "Les broches d'adresse %d et les broches RVB %d indiquent une hauteur de " diff --git a/locale/hi.po b/locale/hi.po index 88c82d4b8..fa57c47e5 100644 --- a/locale/hi.po +++ b/locale/hi.po @@ -339,6 +339,10 @@ msgstr "" msgid "All event channels in use" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "" @@ -387,6 +391,7 @@ msgstr "" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "" @@ -586,6 +591,7 @@ msgstr "" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "" @@ -623,6 +629,10 @@ msgstr "" msgid "Cannot reset into bootloader because no bootloader is present." msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "" @@ -859,11 +869,12 @@ msgstr "" msgid "Error in regex" msgstr "" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -917,7 +928,7 @@ msgstr "" msgid "FFT is implemented for linear arrays only" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "" @@ -1045,6 +1056,10 @@ msgstr "" msgid "I2C Init Error" msgstr "" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "" @@ -1068,6 +1083,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "" @@ -1080,6 +1099,31 @@ msgstr "" msgid "Input/output error" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "" @@ -1131,7 +1175,7 @@ msgstr "" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "" @@ -1225,6 +1269,8 @@ msgstr "" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "" @@ -1253,7 +1299,7 @@ msgstr "" msgid "Invalid size" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "" @@ -1261,10 +1307,6 @@ msgstr "" msgid "Invalid state" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "" @@ -1281,10 +1323,6 @@ msgstr "" msgid "Invalid word/bit length" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "" @@ -1346,6 +1384,36 @@ msgstr "" msgid "Missing MISO or MOSI Pin" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" @@ -1399,14 +1467,14 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "" @@ -1463,6 +1531,16 @@ msgstr "" msgid "No network with that ssid" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1518,6 +1596,10 @@ msgstr "" msgid "Only 8 or 16 bit mono with " msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "" @@ -1567,7 +1649,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "" @@ -1590,6 +1672,7 @@ msgid "" msgstr "" #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "" @@ -1602,11 +1685,20 @@ msgstr "" msgid "Permission denied" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "" @@ -1667,10 +1759,34 @@ msgstr "" msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "" +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" @@ -1679,6 +1795,10 @@ msgstr "" msgid "RNG Init Error" msgstr "" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1686,6 +1806,7 @@ msgstr "" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "" @@ -1694,7 +1815,7 @@ msgid "RTC is not supported on this board" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" @@ -1751,11 +1872,6 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -1774,6 +1890,10 @@ msgstr "" msgid "SPI Re-initialization error" msgstr "" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "" @@ -1804,6 +1924,14 @@ msgstr "" msgid "Server side context cannot have hostname" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "" @@ -1968,6 +2096,10 @@ msgstr "" msgid "UART Re-init error" msgstr "" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "" @@ -2031,7 +2163,7 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" @@ -2072,7 +2204,8 @@ msgid "" msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "" @@ -2123,6 +2256,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" @@ -2328,7 +2462,7 @@ msgstr "" msgid "buffer too small" msgstr "" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "" @@ -3488,6 +3622,10 @@ msgstr "" msgid "pop from empty %q" msgstr "" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "" @@ -3504,6 +3642,7 @@ msgstr "" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3521,6 +3660,14 @@ msgstr "" msgid "pressing both buttons at start up.\n" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "" @@ -3724,6 +3871,7 @@ msgstr "" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" diff --git a/locale/it_IT.po b/locale/it_IT.po index b380b2fae..561f9fb08 100644 --- a/locale/it_IT.po +++ b/locale/it_IT.po @@ -341,6 +341,10 @@ msgstr "Tutte le periferiche I2C sono in uso" msgid "All event channels in use" msgstr "Tutti i canali eventi utilizati" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "Tutti i canali di eventi sincronizzati in uso" @@ -389,6 +393,7 @@ msgstr "" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "funzionalità AnalogOut non supportata" @@ -592,6 +597,7 @@ msgstr "Impossibile cancellare valori" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "non si può tirare quando nella modalita output" @@ -631,6 +637,10 @@ msgid "Cannot reset into bootloader because no bootloader is present." msgstr "" "Impossibile resettare nel bootloader poiché nessun bootloader è presente." +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "non si può impostare un valore quando direzione è input" @@ -870,11 +880,12 @@ msgstr "Canale EXTINT già in uso" msgid "Error in regex" msgstr "Errore nella regex" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -930,7 +941,7 @@ msgstr "" msgid "FFT is implemented for linear arrays only" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "" @@ -1058,6 +1069,10 @@ msgstr "operazione I/O su file chiuso" msgid "I2C Init Error" msgstr "" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "" @@ -1083,6 +1098,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "" @@ -1095,6 +1114,31 @@ msgstr "" msgid "Input/output error" msgstr "Errore input/output" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "" @@ -1146,7 +1190,7 @@ msgstr "" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "Frequenza PWM non valida" @@ -1242,6 +1286,8 @@ msgstr "Pin non valido per il canale destro" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "Pin non validi" @@ -1270,7 +1316,7 @@ msgstr "" msgid "Invalid size" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "" @@ -1278,10 +1324,6 @@ msgstr "" msgid "Invalid state" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "" @@ -1299,10 +1341,6 @@ msgstr "File wave non valido" msgid "Invalid word/bit length" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "" @@ -1365,6 +1403,36 @@ msgstr "" msgid "Missing MISO or MOSI Pin" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" @@ -1418,14 +1486,14 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Nessun pin RX" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Nessun pin TX" @@ -1482,6 +1550,16 @@ msgstr "" msgid "No network with that ssid" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1541,6 +1619,10 @@ msgstr "operazione I2C non supportata" msgid "Only 8 or 16 bit mono with " msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "" @@ -1590,7 +1672,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "" @@ -1618,6 +1700,7 @@ msgstr "" "impostato nel costruttore a False." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "" @@ -1630,11 +1713,20 @@ msgstr "" msgid "Permission denied" msgstr "Permesso negato" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Il pin non ha capacità di ADC" @@ -1696,10 +1788,34 @@ msgstr "" msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "" +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" @@ -1708,6 +1824,10 @@ msgstr "" msgid "RNG Init Error" msgstr "" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1715,6 +1835,7 @@ msgstr "" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "calibrazione RTC non supportata su questa scheda" @@ -1723,7 +1844,7 @@ msgid "RTC is not supported on this board" msgstr "RTC non supportato su questa scheda" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" @@ -1781,11 +1902,6 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "SDA o SCL necessitano un pull-up" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -1804,6 +1920,10 @@ msgstr "" msgid "SPI Re-initialization error" msgstr "" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c #, fuzzy msgid "Sample rate must be positive" @@ -1836,6 +1956,14 @@ msgstr "Serializer in uso" msgid "Server side context cannot have hostname" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "" @@ -2000,6 +2128,10 @@ msgstr "" msgid "UART Re-init error" msgstr "" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "" @@ -2064,7 +2196,7 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "indentazione inaspettata" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" @@ -2105,7 +2237,8 @@ msgid "" msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "baudrate non supportato" @@ -2157,6 +2290,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "ATTENZIONE: Il nome del sorgente ha due estensioni\n" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" @@ -2365,7 +2499,7 @@ msgstr "slice del buffer devono essere della stessa lunghezza" msgid "buffer too small" msgstr "buffer troppo piccolo" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "" @@ -3545,6 +3679,10 @@ msgstr "pop sun un PulseIn vuoto" msgid "pop from empty %q" msgstr "" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "il terzo argomento di pow() non può essere 0" @@ -3561,6 +3699,7 @@ msgstr "pow() con 3 argomenti richiede interi" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3578,6 +3717,14 @@ msgstr "" msgid "pressing both buttons at start up.\n" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "overflow della coda" @@ -3784,6 +3931,7 @@ msgstr "" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" @@ -4069,6 +4217,9 @@ msgstr "" msgid "zi must be of shape (n_section, 2)" msgstr "" +#~ msgid "SDA or SCL needs a pull up" +#~ msgstr "SDA o SCL necessitano un pull-up" + #~ msgid "tuple index out of range" #~ msgstr "indice della tupla fuori intervallo" diff --git a/locale/ja.po b/locale/ja.po index bae5704a1..c58264a7d 100644 --- a/locale/ja.po +++ b/locale/ja.po @@ -344,6 +344,10 @@ msgstr "全てのUART周辺機器が使用中" msgid "All event channels in use" msgstr "全てのイベントチャネルが使用中" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "全ての同期イベントチャネルが使用中" @@ -392,6 +396,7 @@ msgstr "指定のピンはAnalogInに対応していません" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "AnalogOut機能に対応していません" @@ -595,6 +600,7 @@ msgstr "値を削除できません" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "出力モード時はpullを取得できません" @@ -632,6 +638,10 @@ msgstr "USBがアクティブの時に'/'を再マウントできません" msgid "Cannot reset into bootloader because no bootloader is present." msgstr "ブートローダが存在しないためブートローダへとリセットできません" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "方向がinputのときは値を設定できません" @@ -870,11 +880,12 @@ msgstr "EXTINTチャネルはすでに使用されています" msgid "Error in regex" msgstr "正規表現にエラーがあります" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -928,7 +939,7 @@ msgstr "FFTはndarrayでのみ使えます" msgid "FFT is implemented for linear arrays only" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "" @@ -1056,6 +1067,10 @@ msgstr "閉じられたファイルへのI/O操作" msgid "I2C Init Error" msgstr "I2C初期化エラー" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "I2SOutが利用できません" @@ -1081,6 +1096,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "バッファサイズが正しくありません" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "" @@ -1093,6 +1112,31 @@ msgstr "" msgid "Input/output error" msgstr "入力/出力エラー" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "認証が不十分" @@ -1144,7 +1188,7 @@ msgstr "不正なDACピンが与えられました" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "無効なPWM周波数" @@ -1238,6 +1282,8 @@ msgstr "右チャネルのピンが不正" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "ピンが不正" @@ -1266,7 +1312,7 @@ msgstr "不正なsecurity_mode" msgid "Invalid size" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "" @@ -1274,10 +1320,6 @@ msgstr "" msgid "Invalid state" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "不正なボイス" @@ -1294,10 +1336,6 @@ msgstr "不正なwaveファイル" msgid "Invalid word/bit length" msgstr "不正なワード/ビット長" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "Keyの長さは、16, 24, 32バイトのいずれかでなければなりません" @@ -1359,6 +1397,36 @@ msgstr "マイクのスタートアップディレイは 0.0 から 1.0 の間 msgid "Missing MISO or MOSI Pin" msgstr "MISOまたはMOSIピンがありません" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "%q のサブクラスでなければなりません" @@ -1412,14 +1480,14 @@ msgstr "MOSIピンがありません" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "RXピンがありません" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "TXピンがありません" @@ -1476,6 +1544,16 @@ msgstr "このピンには使えるタイマーがもうありません" msgid "No network with that ssid" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "ピンにプルダウンがありません。1Mオーム推奨" @@ -1533,6 +1611,10 @@ msgstr "奇数パリティには対応していません" msgid "Only 8 or 16 bit mono with " msgstr "8または16ビットの " +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "" @@ -1582,7 +1664,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "" @@ -1606,6 +1688,7 @@ msgid "" msgstr "PWM周波数は生成時のvariable_frequencyがFalseのとき書き換え不可" #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "ParallelBusにはまだ対応していません" @@ -1618,11 +1701,20 @@ msgstr "" msgid "Permission denied" msgstr "パーミッション拒否" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "ピンにADCの能力がありません" @@ -1683,10 +1775,34 @@ msgstr "" msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "方向がoutputのときpullは使われません" +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "RNG解体エラー" @@ -1695,6 +1811,10 @@ msgstr "RNG解体エラー" msgid "RNG Init Error" msgstr "乱数生成器の初期化エラー" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1702,6 +1822,7 @@ msgstr "" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "このボードはRTCのキャリブレーションに非対応" @@ -1710,7 +1831,7 @@ msgid "RTC is not supported on this board" msgstr "このボードはRTCに対応していません" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "RTS/CTS/RS485はこのデバイスでは未対応" @@ -1767,11 +1888,6 @@ msgstr "セーフモードで実行中！ " msgid "SD card CSD format not supported" msgstr "SDカードのCSDフォーマットは非対応" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "SDAとSCLにプルアップが必要" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -1790,6 +1906,10 @@ msgstr "SPI初期化エラー" msgid "SPI Re-initialization error" msgstr "SPI再初期化エラー" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "サンプルレートは正数でなければなりません" @@ -1820,6 +1940,14 @@ msgstr "シリアライザは使用中" msgid "Server side context cannot have hostname" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "サイズは対応していません" @@ -1990,6 +2118,10 @@ msgstr "UARTの初期化エラー" msgid "UART Re-init error" msgstr "UARTの再初期化エラー" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "UART書き込みエラー" @@ -2054,7 +2186,7 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "想定されていないnrfx UUID型" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" @@ -2095,7 +2227,8 @@ msgid "" msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "非対応のbaudrate" @@ -2146,6 +2279,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" @@ -2351,7 +2485,7 @@ msgstr "バッファのスライスは同じ長さでなければなりません msgid "buffer too small" msgstr "" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "" @@ -3518,6 +3652,10 @@ msgstr "" msgid "pop from empty %q" msgstr "" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "pow()の3つ目の引数は0にできません" @@ -3534,6 +3672,7 @@ msgstr "pow()の第3引数には整数が必要" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3551,6 +3690,14 @@ msgstr "" msgid "pressing both buttons at start up.\n" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "キューがオーバーフローしました" @@ -3755,6 +3902,7 @@ msgstr "time.struct_time()は9要素のシーケンスを受け取ります" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "タイムアウト長は対応する最大値を超えています" @@ -4037,6 +4185,9 @@ msgstr "ziはfloat値でなければなりません" msgid "zi must be of shape (n_section, 2)" msgstr "" +#~ msgid "SDA or SCL needs a pull up" +#~ msgstr "SDAとSCLにプルアップが必要" + #~ msgid "" #~ "\n" #~ "Code done running. Waiting for reload.\n" diff --git a/locale/ko.po b/locale/ko.po index c284971af..ff1217f1c 100644 --- a/locale/ko.po +++ b/locale/ko.po @@ -340,6 +340,10 @@ msgstr "사용중인 모든 UART주변 기기" msgid "All event channels in use" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "" @@ -388,6 +392,7 @@ msgstr "" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "" @@ -589,6 +594,7 @@ msgstr "값을 삭제할 수 없습니다" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "" @@ -626,6 +632,10 @@ msgstr "" msgid "Cannot reset into bootloader because no bootloader is present." msgstr "" +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "" @@ -862,11 +872,12 @@ msgstr "" msgid "Error in regex" msgstr "Regex에 오류가 있습니다." -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -920,7 +931,7 @@ msgstr "" msgid "FFT is implemented for linear arrays only" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "" @@ -1048,6 +1059,10 @@ msgstr "" msgid "I2C Init Error" msgstr "" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "" @@ -1071,6 +1086,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "" @@ -1083,6 +1102,31 @@ msgstr "" msgid "Input/output error" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "" @@ -1134,7 +1178,7 @@ msgstr "" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "" @@ -1228,6 +1272,8 @@ msgstr "오른쪽 채널 핀이 잘못되었습니다" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "핀이 유효하지 않습니다" @@ -1256,7 +1302,7 @@ msgstr "" msgid "Invalid size" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "" @@ -1264,10 +1310,6 @@ msgstr "" msgid "Invalid state" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "" @@ -1284,10 +1326,6 @@ msgstr "" msgid "Invalid word/bit length" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "" @@ -1349,6 +1387,36 @@ msgstr "" msgid "Missing MISO or MOSI Pin" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" @@ -1402,14 +1470,14 @@ msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "" @@ -1466,6 +1534,16 @@ msgstr "" msgid "No network with that ssid" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1521,6 +1599,10 @@ msgstr "" msgid "Only 8 or 16 bit mono with " msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "" @@ -1570,7 +1652,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "" @@ -1593,6 +1675,7 @@ msgid "" msgstr "" #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "" @@ -1605,11 +1688,20 @@ msgstr "" msgid "Permission denied" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "" @@ -1670,10 +1762,34 @@ msgstr "" msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "" +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" @@ -1682,6 +1798,10 @@ msgstr "" msgid "RNG Init Error" msgstr "" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1689,6 +1809,7 @@ msgstr "" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "" @@ -1697,7 +1818,7 @@ msgid "RTC is not supported on this board" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" @@ -1754,11 +1875,6 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -1777,6 +1893,10 @@ msgstr "" msgid "SPI Re-initialization error" msgstr "" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "" @@ -1807,6 +1927,14 @@ msgstr "" msgid "Server side context cannot have hostname" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "" @@ -1971,6 +2099,10 @@ msgstr "" msgid "UART Re-init error" msgstr "" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "" @@ -2035,7 +2167,7 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" @@ -2076,7 +2208,8 @@ msgid "" msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "" @@ -2127,6 +2260,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" @@ -2332,7 +2466,7 @@ msgstr "" msgid "buffer too small" msgstr "" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "" @@ -3492,6 +3626,10 @@ msgstr "" msgid "pop from empty %q" msgstr "" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "" @@ -3508,6 +3646,7 @@ msgstr "" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3525,6 +3664,14 @@ msgstr "" msgid "pressing both buttons at start up.\n" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "" @@ -3728,6 +3875,7 @@ msgstr "" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" diff --git a/locale/nl.po b/locale/nl.po index 2829bd9e8..451241ba5 100644 --- a/locale/nl.po +++ b/locale/nl.po @@ -342,6 +342,10 @@ msgstr "Alle UART peripherals zijn in gebruik" msgid "All event channels in use" msgstr "Alle event kanalen zijn in gebruik" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "Alle sync event kanalen zijn in gebruik" @@ -390,6 +394,7 @@ msgstr "AnalogIn niet ondersteund door gegeven pin" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "AnalogOut functionaliteit niet ondersteund" @@ -591,6 +596,7 @@ msgstr "Kan waardes niet verwijderen" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "get pull kan niet gedurende output mode" @@ -630,6 +636,10 @@ msgid "Cannot reset into bootloader because no bootloader is present." msgstr "" "Kan niet resetten naar bootloader omdat er geen bootloader aanwezig is." +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "Kan de waarde niet toewijzen als de richting input is." @@ -870,11 +880,12 @@ msgstr "EXTINT kanaal al in gebruik" msgid "Error in regex" msgstr "Fout in regex" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -928,7 +939,7 @@ msgstr "FFT alleen voor ndarrays gedefineerd" msgid "FFT is implemented for linear arrays only" msgstr "FFT is alleen geïmplementeerd voor lineaire arrays" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "SSL handdruk mislukt" @@ -1057,6 +1068,10 @@ msgstr "I/O actie op gesloten bestand" msgid "I2C Init Error" msgstr "I2C Init Fout" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "I2SOut is niet beschikbaar" @@ -1082,6 +1097,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Incorrecte buffer grootte" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "De initialisatie is mislukt vanwege een gebrek aan geheugen" @@ -1094,6 +1113,31 @@ msgstr "Invoer duurt te lang" msgid "Input/output error" msgstr "Input/Output fout" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "Onvoldoende authenticatie" @@ -1145,7 +1189,7 @@ msgstr "Ongeldige DAC pin opgegeven" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "Ongeldige PWM frequentie" @@ -1239,6 +1283,8 @@ msgstr "Ongeldige pin voor rechter kanaal" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "Ongeldige pinnen" @@ -1267,7 +1313,7 @@ msgstr "Ongeldige security_mode" msgid "Invalid size" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "" @@ -1275,10 +1321,6 @@ msgstr "" msgid "Invalid state" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "Ongeldige stem" @@ -1295,10 +1337,6 @@ msgstr "Ongeldig wave bestand" msgid "Invalid word/bit length" msgstr "Ongeldig woord/bit lengte" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "Sleutel moet 16, 24, of 32 bytes lang zijn" @@ -1360,6 +1398,36 @@ msgstr "Microfoon opstart vertraging moet in bereik van 0.0 tot 1.0 zijn" msgid "Missing MISO or MOSI Pin" msgstr "Ontbrekende MISO of MOSI Pin" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "%q moet een subklasse zijn." @@ -1413,14 +1481,14 @@ msgstr "Geen MOSI pin" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Geen RX pin" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Geen TX pin" @@ -1477,6 +1545,16 @@ msgstr "Geen timers meer beschikbaar op deze pin." msgid "No network with that ssid" msgstr "Geen netwerk met dat SSID gevonden" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Geen pulldown op pin; 1MOhm aangeraden" @@ -1534,6 +1612,10 @@ msgstr "Oneven pariteit is niet ondersteund" msgid "Only 8 or 16 bit mono with " msgstr "Alleen 8 of 16 bit mono met " +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "Alleen IPv4 adressen worden ondersteund" @@ -1587,7 +1669,7 @@ msgstr "" msgid "Out of memory" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "Geen sockets meer beschikbaar" @@ -1613,6 +1695,7 @@ msgstr "" "tijdens constructie." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "ParallelBus nog niet ondersteund" @@ -1625,11 +1708,20 @@ msgstr "" msgid "Permission denied" msgstr "Toegang geweigerd" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Pin heeft geen ADC mogelijkheden" @@ -1699,10 +1791,34 @@ msgstr "" msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Pull niet gebruikt wanneer de richting output is." +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "RNG DeInit Fout" @@ -1711,6 +1827,10 @@ msgstr "RNG DeInit Fout" msgid "RNG Init Error" msgstr "RNG Init Fout" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1718,6 +1838,7 @@ msgstr "RS485 inversie gespecificeerd terwijl niet in RS485 modus" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "RTC calibratie niet ondersteund door dit board" @@ -1726,7 +1847,7 @@ msgid "RTC is not supported on this board" msgstr "RTC is niet ondersteund door dit board" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "RTS/CTS/RS485 Nog niet ondersteund door dit apparaat" @@ -1783,11 +1904,6 @@ msgstr "Veilige modus wordt uitgevoerd! " msgid "SD card CSD format not supported" msgstr "SD kaart CSD formaat niet ondersteund" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "SDA of SCL hebben een pullup nodig" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -1806,6 +1922,10 @@ msgstr "SPI Init Fout" msgid "SPI Re-initialization error" msgstr "SPI Herinitialisatie Fout" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "Sample rate moet positief zijn" @@ -1836,6 +1956,14 @@ msgstr "Serializer in gebruik" msgid "Server side context cannot have hostname" msgstr "Context aan de serverkant kan geen hostnaam hebben" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "Afmeting niet ondersteund" @@ -2010,6 +2138,10 @@ msgstr "UART Init Fout" msgid "UART Re-init error" msgstr "UART Re-init Fout" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "UART schrijf fout" @@ -2073,7 +2205,7 @@ msgstr "Kan niet naar sleep_memory schrijven." msgid "Unexpected nrfx uuid type" msgstr "Onverwacht mrfx uuid type" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "Niet behandelde ESP TLS fout %d %d %x %d" @@ -2116,7 +2248,8 @@ msgstr "" "apparaat geweigerd of genegeerd werd." #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Niet-ondersteunde baudsnelheid" @@ -2167,6 +2300,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "WAARSCHUWING: De bestandsnaam van de code heeft twee extensies\n" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" "WatchDogTimer kan niet worden gedeïnitialiseerd zodra de modus in ingesteld " @@ -2381,7 +2515,7 @@ msgstr "buffer slices moeten van gelijke grootte zijn" msgid "buffer too small" msgstr "buffer te klein" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "buffer te klein voor gevraagde bytes" @@ -3550,6 +3684,10 @@ msgstr "pop van een lege PulseIn" msgid "pop from empty %q" msgstr "pop van een lege %q" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "derde argument van pow() mag geen 0 zijn" @@ -3566,6 +3704,7 @@ msgstr "pow() met 3 argumenten vereist integers" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3583,6 +3722,14 @@ msgstr "druk bootknop in bij opstarten.\n" msgid "pressing both buttons at start up.\n" msgstr "druk beide knoppen in bij opstarten.\n" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "wachtrij overloop" @@ -3788,6 +3935,7 @@ msgstr "time.struct_time() accepteert een 9-rij" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "time-outduur is groter dan de ondersteunde maximale waarde" @@ -4070,6 +4218,9 @@ msgstr "zi moet van type float zijn" msgid "zi must be of shape (n_section, 2)" msgstr "zi moet vorm (n_section, 2) hebben" +#~ msgid "SDA or SCL needs a pull up" +#~ msgstr "SDA of SCL hebben een pullup nodig" + #~ msgid "%d address pins and %d rgb pins indicate a height of %d, not %d" #~ msgstr "%d adres pins en %d RGB pins geven een hoogte van %d aan, niet %d" diff --git a/locale/pl.po b/locale/pl.po index 0c03a0ee0..c9fd04c38 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2021-01-27 01:31+0000\n" +"PO-Revision-Date: 2021-02-10 21:50+0000\n" "Last-Translator: Maciej Stankiewicz <tawezik@gmail.com>\n" "Language-Team: pl\n" "Language: pl\n" @@ -344,6 +344,10 @@ msgstr "Wszystkie peryferia UART w użyciu" msgid "All event channels in use" msgstr "Wszystkie kanały zdarzeń w użyciu" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "Wszystkie kanały zdarzeń synchronizacji w użyciu" @@ -392,6 +396,7 @@ msgstr "AnalogIn nie jest obsługiwany na danym pinie" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "AnalogOut jest niewspierane" @@ -593,6 +598,7 @@ msgstr "Nie można usunąć" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "Nie ma podciągnięcia w trybie wyjścia" @@ -630,6 +636,10 @@ msgstr "Nie można przemontować '/' gdy USB działa." msgid "Cannot reset into bootloader because no bootloader is present." msgstr "Nie można zrestartować -- nie ma bootloadera." +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "Nie można ustawić wartości w trybie wejścia." @@ -870,11 +880,12 @@ msgstr "Kanał EXTINT w użyciu" msgid "Error in regex" msgstr "Błąd w regex" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -928,7 +939,7 @@ msgstr "" msgid "FFT is implemented for linear arrays only" msgstr "" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "" @@ -1056,6 +1067,10 @@ msgstr "Operacja I/O na zamkniętym pliku" msgid "I2C Init Error" msgstr "Błąd inicjalizacji I2C" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "I2SOut niedostępne" @@ -1081,6 +1096,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Niewłaściwa wielkość bufora" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "Inicjalizacja nie powiodła się z powodu braku pamięci" @@ -1093,6 +1112,31 @@ msgstr "" msgid "Input/output error" msgstr "Błąd I/O" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "Niewystarczające uwierzytelnienie" @@ -1144,7 +1188,7 @@ msgstr "" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "Zła częstotliwość PWM" @@ -1238,6 +1282,8 @@ msgstr "Zła nóżka dla prawego kanału" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "Złe nóżki" @@ -1266,7 +1312,7 @@ msgstr "Nieprawidłowy security_mode" msgid "Invalid size" msgstr "Nieprawidłowy rozmiar" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "" @@ -1274,10 +1320,6 @@ msgstr "" msgid "Invalid state" msgstr "Nieprawidłowy stan" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "" @@ -1294,10 +1336,6 @@ msgstr "Zły plik wave" msgid "Invalid word/bit length" msgstr "Niepoprawna długość słowa/bitu" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "Klucz musi mieć długość 16, 24 lub 32 bajtów" @@ -1360,6 +1398,36 @@ msgstr "Opóźnienie włączenia mikrofonu musi być w zakresie od 0.0 do 1.0" msgid "Missing MISO or MOSI Pin" msgstr "Brak pinu MISO lub MOSI" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" @@ -1413,14 +1481,14 @@ msgstr "Brak pinu MOSI" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Brak nóżki RX" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Brak nóżki TX" @@ -1477,6 +1545,16 @@ msgstr "" msgid "No network with that ssid" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "" + +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1532,6 +1610,10 @@ msgstr "Nieparzysta parzystość nie jest wspierana" msgid "Only 8 or 16 bit mono with " msgstr "Tylko 8 lub 16 bitów mono z " +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "" @@ -1581,7 +1663,7 @@ msgstr "" msgid "Out of memory" msgstr "Brak pamięci" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "" @@ -1604,6 +1686,7 @@ msgid "" msgstr "Nie można zmienić częstotliwości PWM gdy variable_frequency=False." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "ParallelBus nie jest jeszcze obsługiwany" @@ -1616,11 +1699,20 @@ msgstr "" msgid "Permission denied" msgstr "Odmowa dostępu" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Nóżka nie obsługuje ADC" @@ -1681,10 +1773,34 @@ msgstr "" msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Podciągnięcie nieużywane w trybie wyjścia." +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" @@ -1693,6 +1809,10 @@ msgstr "" msgid "RNG Init Error" msgstr "" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1700,6 +1820,7 @@ msgstr "" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "Brak obsługi kalibracji RTC" @@ -1708,7 +1829,7 @@ msgid "RTC is not supported on this board" msgstr "Brak obsługi RTC" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "" @@ -1765,11 +1886,6 @@ msgstr "" msgid "SD card CSD format not supported" msgstr "" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "SDA lub SCL wymagają podciągnięcia" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -1788,6 +1904,10 @@ msgstr "Błąd inicjowania SPI" msgid "SPI Re-initialization error" msgstr "Błąd ponownej inicjalizacji SPI" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "Częstotliwość próbkowania musi być dodatnia" @@ -1818,6 +1938,14 @@ msgstr "Serializator w użyciu" msgid "Server side context cannot have hostname" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "" @@ -1982,6 +2110,10 @@ msgstr "" msgid "UART Re-init error" msgstr "" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "Błąd zapisu UART" @@ -2045,7 +2177,7 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "Nieoczekiwany typ nrfx uuid" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" @@ -2086,7 +2218,8 @@ msgid "" msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Zła szybkość transmisji" @@ -2137,6 +2270,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "UWAGA: Nazwa pliku ma dwa rozszerzenia\n" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" @@ -2348,7 +2482,7 @@ msgstr "fragmenty bufora muszą mieć tę samą długość" msgid "buffer too small" msgstr "zbyt mały bufor" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "" @@ -3510,6 +3644,10 @@ msgstr "pop z pustego PulseIn" msgid "pop from empty %q" msgstr "" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "trzeci argument pow() nie może być 0" @@ -3526,6 +3664,7 @@ msgstr "trzyargumentowe pow() wymaga liczb całkowitych" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3543,6 +3682,14 @@ msgstr "" msgid "pressing both buttons at start up.\n" msgstr "" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "przepełnienie kolejki" @@ -3747,6 +3894,7 @@ msgstr "time.struct_time() wymaga 9-elementowej sekwencji" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" @@ -3959,7 +4107,7 @@ msgstr "" #: shared-bindings/rgbmatrix/RGBMatrix.c msgid "width must be greater than zero" -msgstr "" +msgstr "szerokość musi być większa niż zero" #: ports/esp32s2/common-hal/wifi/Radio.c msgid "wifi is not enabled" @@ -3979,7 +4127,7 @@ msgstr "" #: extmod/ulab/code/vector/vectorise.c msgid "wrong input type" -msgstr "" +msgstr "nieprawidłowy typ wejścia" #: extmod/ulab/code/ulab_create.c py/objstr.c msgid "wrong number of arguments" @@ -3995,7 +4143,7 @@ msgstr "zły typ operandu" #: extmod/ulab/code/vector/vectorise.c msgid "wrong output type" -msgstr "" +msgstr "nieprawidłowy typ wyjścia" #: shared-module/displayio/Shape.c msgid "x value out of bounds" @@ -4029,6 +4177,9 @@ msgstr "" msgid "zi must be of shape (n_section, 2)" msgstr "" +#~ msgid "SDA or SCL needs a pull up" +#~ msgstr "SDA lub SCL wymagają podciągnięcia" + #~ msgid "tuple index out of range" #~ msgstr "indeks krotki poza zakresem" diff --git a/locale/pt_BR.po b/locale/pt_BR.po index 3e397a0ed..04fbb64cc 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2021-01-22 15:30+0000\n" +"PO-Revision-Date: 2021-02-09 14:03+0000\n" "Last-Translator: Wellington Terumi Uemura <wellingtonuemura@gmail.com>\n" "Language-Team: \n" "Language: pt_BR\n" @@ -68,6 +68,8 @@ msgstr "%%c requer int ou char" msgid "" "%d address pins, %d rgb pins and %d tiles indicate a height of %d, not %d" msgstr "" +"%d pinos de endereço, %d pinos rgb e %d blocos indicam uma altura com %d, " +"não %d" #: ports/atmel-samd/common-hal/sdioio/SDCard.c msgid "%q failure: %d" @@ -350,6 +352,10 @@ msgstr "Todos os periféricos UART estão em uso" msgid "All event channels in use" msgstr "Todos os canais de eventos em uso" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "O estado de todas as máquinas em uso" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "Todos os canais dos eventos de sincronização em uso" @@ -398,6 +404,7 @@ msgstr "O AnalogIn não é compatível no pino informado" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "Funcionalidade AnalogOut não suportada" @@ -606,6 +613,7 @@ msgstr "Não é possível excluir valores" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "Não é possível obter (pull) enquanto estiver no modo saída" @@ -646,6 +654,10 @@ msgid "Cannot reset into bootloader because no bootloader is present." msgstr "" "Não é possível redefinir para o bootloader porque o mesmo não está presente." +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "Não foi possível definir as opções do socket" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "Não é possível definir o valor quando a direção é inserida." @@ -830,7 +842,7 @@ msgstr "O pino de dados 0 deve ser alinhado por bytes" #: ports/esp32s2/common-hal/displayio/ParallelBus.c msgid "Data 0 pin must be byte aligned." -msgstr "" +msgstr "O pino de dados 0 deve ser alinhado por bytes." #: shared-module/audiocore/WaveFile.c msgid "Data chunk must follow fmt chunk" @@ -886,11 +898,12 @@ msgstr "Canal EXTINT em uso" msgid "Error in regex" msgstr "Erro no regex" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "Erro: Falha na vinculação" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -944,7 +957,7 @@ msgstr "O FFT é definido apenas para ndarrays" msgid "FFT is implemented for linear arrays only" msgstr "O FFT é implementado apenas para matrizes lineares" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "Houve uma falha no handshake do SSL" @@ -1073,6 +1086,10 @@ msgstr "Operação I/O no arquivo fechado" msgid "I2C Init Error" msgstr "Erro de inicialização do I2C" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "Periférico I2C em uso" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "O I2SOut não está disponível" @@ -1098,6 +1115,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "O tamanho do buffer está incorreto" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "O tamanho do programa Init é inválido" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "A inicialização falhou devido à falta de memória" @@ -1110,6 +1131,31 @@ msgstr "A entrada está demorando demais" msgid "Input/output error" msgstr "Erro de entrada/saída" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "A instrução %d salta no pino" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "A instrução %d muda com mais bits do que a quantidade dos pinos" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "A instrução %d desloca mais bits do que a quantidade dos pinos" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "A instrução %d usa um pino extra" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "A instrução %d aguarda a entrada de fora da contagem" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "Autenticação insuficiente" @@ -1161,7 +1207,7 @@ msgstr "O pino DAC informado é inválido" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "Frequência PWM inválida" @@ -1255,6 +1301,8 @@ msgstr "Pino inválido para canal direito" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "Pinos inválidos" @@ -1283,7 +1331,7 @@ msgstr "O Security_mode é inválido" msgid "Invalid size" msgstr "Tamanho inválido" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "Soquete inválido para o TLS" @@ -1291,10 +1339,6 @@ msgstr "Soquete inválido para o TLS" msgid "Invalid state" msgstr "Estado inválido" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "Uso inválido do soquete TLS" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "A voz é inválida" @@ -1311,10 +1355,6 @@ msgstr "Aqruivo de ondas inválido" msgid "Invalid word/bit length" msgstr "O comprimento do bit/palavra são inválidos" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "Problema na configuração do SO_REUSEADDR" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "A chave deve ter 16, 24 ou 32 bytes de comprimento" @@ -1376,6 +1416,36 @@ msgstr "O atraso na inicialização do microfone deve estar entre 0,0 e 1,0" msgid "Missing MISO or MOSI Pin" msgstr "O pino MISO ou MOSI está ausente" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "Faltando first_in_pin. A instrução %d lê pinos(s)" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "Faltando first_in_pin. A instrução %d muda a partir do(s) pino(s)" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "Faltando first_in_pin. A instrução %d aguarda com base no pino" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "Faltando first_out_pin. A instrução %d muda para o(s) pinos(s)" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "Faltando first_out_pin. A instrução %d escreve nos pinos(s)" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "Faltando first_set_pin. A instrução %d define os pinos(s)" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "Deve ser uma subclasse %q." @@ -1429,14 +1499,14 @@ msgstr "Nenhum pino MOSI" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Nenhum pino RX" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Nenhum pino TX" @@ -1493,6 +1563,18 @@ msgstr "Não há mais temporizadores disponíveis neste pino." msgid "No network with that ssid" msgstr "Não há rede com este ssid" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "Sem saída no programa" + +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "" +"Nenhum pull up foi encontrado no SDA ou no SCL; verifique o fio das suas " +"conexões" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Não há pulldown no pino; É recomendável utilizar um resistor de 1M ohm" @@ -1549,6 +1631,10 @@ msgstr "A paridade ímpar não é compatível" msgid "Only 8 or 16 bit mono with " msgstr "Apenas mono com 8 ou 16 bits com " +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "Somente IN/OUT de até 8 suportados" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "Somente os endereços IPv4 são suportados" @@ -1602,7 +1688,7 @@ msgstr "A operação expirou" msgid "Out of memory" msgstr "Sem memória" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "Sem soquetes" @@ -1629,6 +1715,7 @@ msgstr "" "na construção." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "O ParallelBus ainda não é compatível" @@ -1641,11 +1728,20 @@ msgstr "O periférico está em uso" msgid "Permission denied" msgstr "Permissão negada" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "A contagem dos pinos deve ser com pelo menos 1" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "A contagem dos pinos é muito grande" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "O pino não tem recursos de ADC" @@ -1718,10 +1814,34 @@ msgstr "" "Tentando entrar no deep sleep até o alarme, pressione CTRL-C ou grave o " "arquivo.\n" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "O programa faz IN sem carregar o ISR" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "O programa faz OUT sem carregar o OSR" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "O programa deve conter pelo menos uma instrução com 16 bits." + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "O tamanho do programa é inválido" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "O programa é muito grande" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "O Pull não foi usado quando a direção for gerada." +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "O modo RAISE não foi implementado" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "Erro DeInit RNG" @@ -1730,6 +1850,10 @@ msgstr "Erro DeInit RNG" msgid "RNG Init Error" msgstr "Houve um erro na inicialização do RNG" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "Ainda não há suporte para o RS485 neste dispositivo" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1737,6 +1861,7 @@ msgstr "A definição da inversão do RS485 quando não está no modo RS485" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "A calibração RTC não é suportada nesta placa" @@ -1745,7 +1870,7 @@ msgid "RTC is not supported on this board" msgstr "O RTC não é suportado nesta placa" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "RTS/CTS/RS485 Ainda não é compatível neste dispositivo" @@ -1802,11 +1927,6 @@ msgstr "Executando no modo de segurança! " msgid "SD card CSD format not supported" msgstr "O formato CSD do Cartão SD não é compatível" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "SDA ou SCL precisa de um pull up" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -1825,6 +1945,10 @@ msgstr "Houve um erro na inicialização SPI" msgid "SPI Re-initialization error" msgstr "Houve um erro na reinicialização SPI" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "O periférico SPI está em uso" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "A taxa de amostragem deve ser positiva" @@ -1855,6 +1979,15 @@ msgstr "Serializer em uso" msgid "Server side context cannot have hostname" msgstr "O contexto do lado do servidor não pode ter nome de host" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "A definição da contagem dos pinos deve estar entre 1 e 5" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "" +"A definição da contagem dos pinos do conjunto lateral deve estar entre 1 e 5" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "O tamanho não é suportado" @@ -2033,6 +2166,10 @@ msgstr "Houve um erro na inicialização do UART" msgid "UART Re-init error" msgstr "Houve um erro na reinicialização do UART" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "O UART ainda não é suportado" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "Houve um erro na gravação UART" @@ -2096,7 +2233,7 @@ msgstr "Não foi possível escrever no sleep_memory." msgid "Unexpected nrfx uuid type" msgstr "Tipo uuid nrfx inesperado" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "Erro não tratado do ESP TLS %d %d %x %d" @@ -2139,7 +2276,8 @@ msgstr "" "dispositivo tenha sido recusado ou ignorado." #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Taxa de transmissão não suportada" @@ -2190,6 +2328,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "AVISO: Seu arquivo de código tem duas extensões\n" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" "O WatchDogTimer não pode ser não-inicializado uma vez que o modo é definido " @@ -2405,7 +2544,7 @@ msgstr "as fatias do buffer devem ter o mesmo comprimento" msgid "buffer too small" msgstr "o buffer é muito pequeno" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "o buffer é pequeno demais para os bytes requisitados" @@ -3585,6 +3724,10 @@ msgstr "pop a partir de um PulseIn vazio" msgid "pop from empty %q" msgstr "pop a partir do %q vazio" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "a porta deve ser > = 0" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "O terceiro argumento pow() não pode ser 0" @@ -3601,6 +3744,7 @@ msgstr "o pow() com 3 argumentos requer números inteiros" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3618,6 +3762,14 @@ msgstr "pressionando o botão de boot na inicialização.\n" msgid "pressing both buttons at start up.\n" msgstr "pressionando ambos os botões durante a inicialização.\n" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "O pull_threshold deve ser entre 1 e 32" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "O pull_threshold deve ser entre 1 e 32" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "estouro de fila" @@ -3815,7 +3967,7 @@ msgstr "Limite deve estar no alcance de 0-65536" #: shared-bindings/rgbmatrix/RGBMatrix.c msgid "tile must be greater than zero" -msgstr "" +msgstr "o bloco deve ser maior que zero" #: shared-bindings/time/__init__.c msgid "time.struct_time() takes a 9-sequence" @@ -3823,6 +3975,7 @@ msgstr "time.struct_time() leva uma sequência com 9" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "a duração do tempo limite excedeu o valor máximo suportado" @@ -4105,6 +4258,15 @@ msgstr "zi deve ser de um tipo float" msgid "zi must be of shape (n_section, 2)" msgstr "zi deve estar na forma (n_section, 2)" +#~ msgid "SDA or SCL needs a pull up" +#~ msgstr "SDA ou SCL precisa de um pull up" + +#~ msgid "Invalid use of TLS Socket" +#~ msgstr "Uso inválido do soquete TLS" + +#~ msgid "Issue setting SO_REUSEADDR" +#~ msgstr "Problema na configuração do SO_REUSEADDR" + #~ msgid "%d address pins and %d rgb pins indicate a height of %d, not %d" #~ msgstr "" #~ "%d endereços dos pinos e %d pinos rgb indicam uma altura do %d, não %d" diff --git a/locale/sv.po b/locale/sv.po index 3aa0dcc1e..e9eb91b05 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2021-01-25 19:32+0000\n" +"PO-Revision-Date: 2021-02-05 19:47+0000\n" "Last-Translator: Jonny Bergdahl <jonny@bergdahl.it>\n" "Language-Team: LANGUAGE <LL@li.org>\n" "Language: sv\n" @@ -68,6 +68,7 @@ msgstr "%%c kräver int eller char" msgid "" "%d address pins, %d rgb pins and %d tiles indicate a height of %d, not %d" msgstr "" +"%d adresspinnar, %d rgb-stift och %d brickor anger en höjd på %d, inte %d" #: ports/atmel-samd/common-hal/sdioio/SDCard.c msgid "%q failure: %d" @@ -346,6 +347,10 @@ msgstr "Alla UART-kringutrustning används" msgid "All event channels in use" msgstr "Alla händelsekanaler används" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "Alla tillståndsmaskiner används" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "Alla händelsekanaler används" @@ -394,6 +399,7 @@ msgstr "AnalogIn stöds inte på angiven pinne" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "AnalogOut-funktionalitet stöds inte" @@ -596,6 +602,7 @@ msgstr "Kan inte radera värden" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "Kan inte ange pull i output-läge" @@ -635,6 +642,10 @@ msgid "Cannot reset into bootloader because no bootloader is present." msgstr "" "Det går inte att återställa till bootloader eftersom bootloader saknas." +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "Det går inte att ange socketalternativ" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "Kan inte sätta värde när riktning är input." @@ -819,7 +830,7 @@ msgstr "Datapinne 0 måste vara bytejusterad" #: ports/esp32s2/common-hal/displayio/ParallelBus.c msgid "Data 0 pin must be byte aligned." -msgstr "" +msgstr "Datapinne 0 måste vara byte-justerad." #: shared-module/audiocore/WaveFile.c msgid "Data chunk must follow fmt chunk" @@ -875,11 +886,12 @@ msgstr "EXTINT-kanalen används redan" msgid "Error in regex" msgstr "Fel i regex" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "Fel: Bind misslyckades" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -933,7 +945,7 @@ msgstr "FFT är enbart definierade för ndarrays" msgid "FFT is implemented for linear arrays only" msgstr "FTT är enbart implementerad för linjära matriser" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "Misslyckad SSL-handskakning" @@ -1061,6 +1073,10 @@ msgstr "I/O-operation på stängd fil" msgid "I2C Init Error" msgstr "I2C init-fel" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "I2C-enhet används redan" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "I2SOut är inte tillgängligt" @@ -1086,6 +1102,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Fel buffertstorlek" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "Storlek på init-program ogiltigt" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "Initieringen misslyckades på grund av minnesbrist" @@ -1098,6 +1118,31 @@ msgstr "Indata tar för lång tid" msgid "Input/output error" msgstr "Indata-/utdatafel" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "Instruktion %d hoppar på pinne" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "Instruktion %d skiftar fler bitar än antalet pinnar" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "Instruktion %d skiftar fler bitar än antal pinnar" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "Instruktion %d använder extra pinne" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "Instruktion %d väntar på inmatning utanför intervallet" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "Otillräcklig autentisering" @@ -1149,7 +1194,7 @@ msgstr "Ogiltig DAC-pinne angiven" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "Ogiltig PWM-frekvens" @@ -1243,6 +1288,8 @@ msgstr "Ogiltig pinne för höger kanal" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "Ogiltiga pinnar" @@ -1271,7 +1318,7 @@ msgstr "Ogiltigt säkerhetsläge" msgid "Invalid size" msgstr "Ogiltig storlek" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "Ogiltig socket för TLS" @@ -1279,10 +1326,6 @@ msgstr "Ogiltig socket för TLS" msgid "Invalid state" msgstr "Ogiltigt tillstånd" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "Ogiltig användning av TLS Socket" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "Ogiltig kanal" @@ -1299,10 +1342,6 @@ msgstr "Ogiltig wave-fil" msgid "Invalid word/bit length" msgstr "Ogiltig word-/bitlängd" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "Misslyckades att sätta SO_REUSEADDR" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "Nyckeln måste vara 16, 24 eller 32 byte lång" @@ -1365,6 +1404,36 @@ msgstr "" msgid "Missing MISO or MOSI Pin" msgstr "MISO- eller MOSI-pinne saknas" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "Saknad first_in_pin. Instruktion %d läser pinnar" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "Saknad first_in_pin. Instruktion %d skiftar in från pinnar" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "Saknad first_in_pin. Instruktion %d väntar baserat på pinne" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "Saknad first_out_pin. Instruktion %d skiftar ut till pinnar" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "Saknad first_out_pin. Instruktion %d skriver till pinnar" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "Saknad first_set_pin. Instruktion %d sätter pinnar" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "Måste vara en %q-subklass." @@ -1418,14 +1487,14 @@ msgstr "Ingen MOSI-pinne" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Ingen RX-pinne" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Ingen TX-pinne" @@ -1482,6 +1551,16 @@ msgstr "Inga fler timers tillgängliga på denna pinne." msgid "No network with that ssid" msgstr "Inget nätverk med sådant ssid" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "Inget out i programmet" + +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "Ingen pull-up hittades på SDA eller SCL; kontrollera inkopplingen" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Ingen pulldown på pinnen; 1Mohm rekommenderas" @@ -1539,6 +1618,10 @@ msgstr "Udda paritet stöds inte" msgid "Only 8 or 16 bit mono with " msgstr "Endast 8 eller 16 bitars mono med " +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "Endast IN/OUT på upp till 8 stöds" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "Endast IPv4-adresser stöds" @@ -1591,7 +1674,7 @@ msgstr "Åtgärden orsakade timeout" msgid "Out of memory" msgstr "Slut på minne" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "Slut på sockets" @@ -1616,6 +1699,7 @@ msgstr "" "skapandet." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "ParallelBus stöds ännu inte" @@ -1628,11 +1712,20 @@ msgstr "Periferi i bruk" msgid "Permission denied" msgstr "Åtkomst nekad" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "Antalet pinnar måste vara minst 1" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "Antal pinnar för stort" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Pinnen har inte ADC-funktionalitet" @@ -1702,10 +1795,34 @@ msgstr "" msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "Fingerar djup sömn tills larm, Ctrl-C eller filskrivning.\n" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "Program gör IN utan att ladda ISR" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "Program gör OUT utan att läsa in OSR" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "Programmet måste innehålla minst en 16-bitars instruktion." + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "Programstorlek ogiltig" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "Programmet är för stort" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Pull används inte när riktningen är output." +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "RAISE-läge är inte implementerat" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "RNG DeInit-fel" @@ -1714,6 +1831,10 @@ msgstr "RNG DeInit-fel" msgid "RNG Init Error" msgstr "RNG Init-fel" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "RS485 stöds ännu inte på den här enheten" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1721,6 +1842,7 @@ msgstr "RS485-inversion specificerad när den inte är i RS485-läge" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "RTC-kalibrering stöds inte av detta kort" @@ -1729,7 +1851,7 @@ msgid "RTC is not supported on this board" msgstr "RTC stöds inte av detta kort" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "RTS/CTS/RS485 Stöds ännu inte på den här enheten" @@ -1786,11 +1908,6 @@ msgstr "Kör i säkert läge! " msgid "SD card CSD format not supported" msgstr "SD-kort CSD-format stöds inte" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "SDA eller SCL behöver en pullup" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -1809,6 +1926,10 @@ msgstr "SPI Init-fel" msgid "SPI Re-initialization error" msgstr "SPI reinitialiseringsfel" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "SPI-enhet används redan" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "Samplingsfrekvensen måste vara positiv" @@ -1839,6 +1960,14 @@ msgstr "Serializern används redan" msgid "Server side context cannot have hostname" msgstr "Serversidans kontext kan inte ha värdnamn" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "Inställt antal pinnar måste vara mellan 1 och 5" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "Sido-setets antal pinnar måste vara mellan 1 och 5" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "Storleken stöds inte" @@ -2013,6 +2142,10 @@ msgstr "UART Init-fel" msgid "UART Re-init error" msgstr "UART reinit-fel" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "UART stöds ännu inte" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "UART skrivfel" @@ -2076,7 +2209,7 @@ msgstr "Det gick inte att skriva till sleep_memory." msgid "Unexpected nrfx uuid type" msgstr "Oväntad nrfx uuid-typ" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "Ej hanterat ESP TLS-fel %d-%d-%x-%d" @@ -2119,7 +2252,8 @@ msgstr "" "eller ignorerades." #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Baudrate stöd inte" @@ -2170,6 +2304,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "VARNING: Ditt filnamn för kod har två tillägg\n" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "WatchDogTimer kan inte avinitialiseras när läget är inställt på RESET" @@ -2381,7 +2516,7 @@ msgstr "buffertsegmenten måste vara lika långa" msgid "buffer too small" msgstr "buffert för liten" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "buffert för liten för begärd längd" @@ -3550,6 +3685,10 @@ msgstr "pop från en tom PulseIn" msgid "pop from empty %q" msgstr "pop från tom %q" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "pow() 3: e argument kan inte vara 0" @@ -3566,6 +3705,7 @@ msgstr "pow() med 3 argument kräver heltal" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3583,6 +3723,14 @@ msgstr "trycka på startknappen vid start.\n" msgid "pressing both buttons at start up.\n" msgstr "trycka båda knapparna vid uppstart.\n" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "pull_threshold måste vara mellan 1 och 32" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "push_threshold måste vara mellan 1 och 32" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "köstorlek överskreds" @@ -3780,7 +3928,7 @@ msgstr "tröskelvärdet måste ligga i intervallet 0-65536" #: shared-bindings/rgbmatrix/RGBMatrix.c msgid "tile must be greater than zero" -msgstr "" +msgstr "tile måste vara större än noll" #: shared-bindings/time/__init__.c msgid "time.struct_time() takes a 9-sequence" @@ -3788,6 +3936,7 @@ msgstr "time.struct_time() kräver en 9-sekvens" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "timeout-längd överskred det maximala värde som stöds" @@ -4070,6 +4219,15 @@ msgstr "zi måste vara av typ float" msgid "zi must be of shape (n_section, 2)" msgstr "zi måste vara i formen (n_section, 2)" +#~ msgid "SDA or SCL needs a pull up" +#~ msgstr "SDA eller SCL behöver en pullup" + +#~ msgid "Invalid use of TLS Socket" +#~ msgstr "Ogiltig användning av TLS Socket" + +#~ msgid "Issue setting SO_REUSEADDR" +#~ msgstr "Misslyckades att sätta SO_REUSEADDR" + #~ msgid "%d address pins and %d rgb pins indicate a height of %d, not %d" #~ msgstr "%d adresspinnar och %d RGB-pinnar indikerar en höjd av %d, inte %d" diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index 07e461bf8..f4b549777 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -7,7 +7,7 @@ msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2021-01-04 12:55-0600\n" -"PO-Revision-Date: 2021-01-25 19:32+0000\n" +"PO-Revision-Date: 2021-02-09 14:03+0000\n" "Last-Translator: hexthat <hexthat@gmail.com>\n" "Language-Team: Chinese Hanyu Pinyin\n" "Language: zh_Latn_pinyin\n" @@ -69,6 +69,8 @@ msgstr "%%c xūyào zhěngshù huò char" msgid "" "%d address pins, %d rgb pins and %d tiles indicate a height of %d, not %d" msgstr "" +"%d de zhǐ yǐn jiǎo , %d rgb yǐn jiǎo hé %d qiē piàn biǎo shì %d de gāo dù, " +"ér bù shì %d" #: ports/atmel-samd/common-hal/sdioio/SDCard.c msgid "%q failure: %d" @@ -347,6 +349,10 @@ msgstr "Suǒyǒu UART wàiwéi zhèngzài shǐyòng" msgid "All event channels in use" msgstr "Suǒyǒu shǐyòng de shìjiàn píndào" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "All state machines in use" +msgstr "suǒ yǒu zhèng zài shǐ yòng de zhuàng tài jī" + #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "Suǒyǒu tóngbù shìjiàn píndào shǐyòng" @@ -395,6 +401,7 @@ msgstr "Gěi dìng de yǐn jiǎo bù zhīchí AnalogIn" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c +#: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "Bù zhīchí AnalogOut gōngnéng" @@ -598,6 +605,7 @@ msgstr "Wúfǎ shānchú zhí" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c +#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "Zài shūchū móshì xià wúfǎ huòqǔ lādòng" @@ -635,6 +643,10 @@ msgstr "USB jīhuó shí wúfǎ chóngxīn bǎng ding '/'." msgid "Cannot reset into bootloader because no bootloader is present." msgstr "Wúfǎ chóng zhì wèi bootloader, yīnwèi méiyǒu bootloader cúnzài." +#: ports/esp32s2/common-hal/socketpool/Socket.c +msgid "Cannot set socket options" +msgstr "wú fǎ shè zhì tào jiē zì xuǎn xiàng" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "Dāng fāngxiàng xiàng nèi shí, bùnéng shèzhì gāi zhí." @@ -817,7 +829,7 @@ msgstr "Shùjù 0 de yǐn jiǎo bìxū shì zì jié duìqí" #: ports/esp32s2/common-hal/displayio/ParallelBus.c msgid "Data 0 pin must be byte aligned." -msgstr "" +msgstr "shù jù 0 yǐn jiǎo bì xū àn zì jié duì qí." #: shared-module/audiocore/WaveFile.c msgid "Data chunk must follow fmt chunk" @@ -873,11 +885,12 @@ msgstr "EXTINT píndào yǐjīng shǐyòng" msgid "Error in regex" msgstr "Zhèngzé biǎodá shì cuòwù" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "cuò wù: bǎng dìng shī bài" -#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c @@ -931,7 +944,7 @@ msgstr "FFT jǐn wéi ndarrays dìng yì" msgid "FFT is implemented for linear arrays only" msgstr "FFT jǐn shì yòng yú xiàn xìng zhèn liè" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "SSL wòshǒu shībài" @@ -1059,6 +1072,10 @@ msgstr "Wénjiàn shàng de I/ O cāozuò" msgid "I2C Init Error" msgstr "I2C chūshǐhuà cuòwù" +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "I2C peripheral in use" +msgstr "I2C wài shè zhèng zài shǐ yòng zhōng" + #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "I2SOut bù kě yòng" @@ -1084,6 +1101,10 @@ msgstr "" msgid "Incorrect buffer size" msgstr "Huǎnchōng qū dàxiǎo bù zhèngquè" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Init program size invalid" +msgstr "Init chéng xù dà xiǎo wú xiào" + #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "yóu yú nèi cún bù zú, chū shǐ huà shī bài" @@ -1096,6 +1117,31 @@ msgstr "Shūrù shíjiānguò zhǎng" msgid "Input/output error" msgstr "Shūrù/shūchū cuòwù" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d jumps on pin" +msgstr "zhǐ lìng %d zài yǐn jiǎo shàng tiào zhuǎn" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts in more bits than pin count" +msgstr "zhǐ lìng %d yí wèi chāo guò yǐn jiǎo jì shù" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d shifts out more bits than pin count" +msgstr "zhǐ lìng %d yí chū de wèi bǐ yǐn jiǎo shù duō" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d uses extra pin" +msgstr "zhǐ lìng %d shǐ yòng é wài de yǐn jiǎo" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Instruction %d waits on input outside of count" +msgstr "zhǐ lìng %d děng dài jì shù zhī wài de shū rù" + #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "Rènzhèng bùzú" @@ -1147,7 +1193,7 @@ msgstr "Tí gōng liǎo wúxiào de DAC yǐn jiǎo" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c -#: shared-bindings/pwmio/PWMOut.c +#: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "Wúxiào de PWM pínlǜ" @@ -1241,6 +1287,8 @@ msgstr "Yòuxián tōngdào yǐn jiǎo wúxiào" #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/SPI.c msgid "Invalid pins" msgstr "Wúxiào de yǐn jiǎo" @@ -1269,7 +1317,7 @@ msgstr "Ānquán móshì wúxiào" msgid "Invalid size" msgstr "dà xiǎo wú xiào" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "TLS de chā zuò wú xiào" @@ -1277,10 +1325,6 @@ msgstr "TLS de chā zuò wú xiào" msgid "Invalid state" msgstr "wú xiào zhuàng tài" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Invalid use of TLS Socket" -msgstr "TLS tào jiē zì de wú xiào shǐ yòng" - #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "Yǔyīn wúxiào" @@ -1297,10 +1341,6 @@ msgstr "Wúxiào de làng làngcháo wénjiàn" msgid "Invalid word/bit length" msgstr "Wúxiào de zì/wèi chángdù" -#: ports/esp32s2/common-hal/socketpool/Socket.c -msgid "Issue setting SO_REUSEADDR" -msgstr "wèn tí shè zhì SO_REUSEADDR" - #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "mì yào bì xū wéi 16, 24 huò 32 zì jié cháng" @@ -1362,6 +1402,37 @@ msgstr "Màikèfēng qǐdòng yánchí bìxū zài 0.0 Dào 1.0 De fànwéi nèi msgid "Missing MISO or MOSI Pin" msgstr "Quēshǎo MISO huò MOSI yǐn jiǎo" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d reads pin(s)" +msgstr "shǒu xiān zài yǐn jiǎo zhōng quē shī. zhǐ lìng %d dú qǔ yǐn jiǎo" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" +msgstr "shǒu xiān zài yǐn jiǎo zhōng quē shī. zhǐ lìng %d cóng yǐn jiǎo yí wèi" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_in_pin. Instruction %d waits based on pin" +msgstr "" +"shǒu xiān zài yǐn jiǎo zhōng quē shī. jī yú yǐn jiǎo de zhǐ lìng %d děng dài" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" +msgstr "xiān lòu chū yǐn jiǎo. zhǐ lìng %d yí chū dào yǐn jiǎo" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_out_pin. Instruction %d writes pin(s)" +msgstr "xiān lòu chū yǐn jiǎo. zhǐ lìng %d xiě rù yǐn jiǎo" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +#, c-format +msgid "Missing first_set_pin. Instruction %d sets pin(s)" +msgstr "quē shǎo dì yī zǔ yǐn jiǎo. zhǐ lìng %d shè zhì yǐn jiǎo" + #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "Bìxū shì %q zi lèi." @@ -1415,14 +1486,14 @@ msgstr "Méiyǒu MOSI yǐn jiǎo" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Wèi zhǎodào RX yǐn jiǎo" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c -#: ports/stm/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Wèi zhǎodào TX yǐn jiǎo" @@ -1479,6 +1550,16 @@ msgstr "Gāi yǐn jiǎo shàng méiyǒu kěyòng de dìngshí qì." msgid "No network with that ssid" msgstr "Méiyǒu wǎngluò yǔ gāi ssid" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "No out in program" +msgstr "chéng xù zhōng wèi tuì chū" + +#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +#: ports/raspberrypi/common-hal/busio/I2C.c +msgid "No pull up found on SDA or SCL; check your wiring" +msgstr "zài SDA huò SCL shàng wèi zhǎo dào shàng lā; jiǎn chá nín de xiàn lù" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Yǐn jiǎo shàng méiyǒu xiàlā; 1Mohm tuījiàn" @@ -1535,6 +1616,10 @@ msgstr "Bù zhīchí jīshù" msgid "Only 8 or 16 bit mono with " msgstr "Zhǐyǒu 8 huò 16 wèi dānwèi " +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Only IN/OUT of up to 8 supported" +msgstr "jǐn zhī chí zuì duō 8 gè IN/OUT" + #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "Jǐn zhīchí IPv4 dìzhǐ" @@ -1588,7 +1673,7 @@ msgstr "cāo zuò yǐ fēn shí" msgid "Out of memory" msgstr "nèi cún bù zú" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "tào jiē zì wài" @@ -1612,6 +1697,7 @@ msgid "" msgstr "Dāng biànliàng_pínlǜ shì False zài jiànzhú shí PWM pínlǜ bùkě xiě." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/raspberrypi/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "Shàng bù zhīchí ParallelBus" @@ -1624,11 +1710,20 @@ msgstr "shǐ yòng zhōng de wài shè" msgid "Permission denied" msgstr "Quánxiàn bèi jùjué" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Pin count must be at least 1" +msgstr "yǐn jiǎo jì shù bì xū zhì shǎo wéi 1" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Pin count too large" +msgstr "yǐn jiǎo jì shù tài dà" + #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Pin méiyǒu ADC nénglì" @@ -1695,10 +1790,34 @@ msgstr "" "jiǎ zhuāng shēn dù shuì mián , zhí dào bào jǐng , CTRL-C huò wén jiàn xiě " "rù .\n" +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does IN without loading ISR" +msgstr "chéng xù zài bù jiā zǎi ISR de qíng kuàng xià wán chéng" + +#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c +msgid "Program does OUT without loading OSR" +msgstr "chéng xù zài bù jiā zǎi Osr de qíng kuàng xià zhí xíng OUT" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program must contain at least one 16-bit instruction." +msgstr "chéng xù bì xū zhì shǎo bāo hán yí gè 16 wèi zhǐ lìng ." + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program size invalid" +msgstr "chéng xù dà xiǎo wú xiào" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Program too large" +msgstr "chéng xù tài dà" + #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Fāngxiàng shūchū shí Pull méiyǒu shǐyòng." +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c +msgid "RAISE mode is not implemented" +msgstr "wèi shí xiàn tí shēng mó shì" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "RNG qǔxiāo chūshǐhuà cuòwù" @@ -1707,6 +1826,10 @@ msgstr "RNG qǔxiāo chūshǐhuà cuòwù" msgid "RNG Init Error" msgstr "RNG chūshǐhuà cuòwù" +#: ports/nrf/common-hal/busio/UART.c +msgid "RS485 Not yet supported on this device" +msgstr "RS485 cǐ shè bèi shàng bù zhī chí" + #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" @@ -1714,6 +1837,7 @@ msgstr "Wèi chǔyú RS485 móshì shí zhǐdìngle RS485 fǎn zhuǎn" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c +#: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "Cǐ bǎn bù zhīchí RTC jiàozhǔn" @@ -1722,7 +1846,7 @@ msgid "RTC is not supported on this board" msgstr "Cǐ bǎn bù zhīchí RTC" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c -#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "RTS/CTS/RS485 gāi shèbèi shàng bù zhīchí" @@ -1779,11 +1903,6 @@ msgstr "Zài ānquán móshì xià yùnxíng! " msgid "SD card CSD format not supported" msgstr "Bù zhīchí SD kǎ CSD géshì" -#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c -#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c -msgid "SDA or SCL needs a pull up" -msgstr "SDA huò SCL xūyào lādòng" - #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" @@ -1802,6 +1921,10 @@ msgstr "SPI chūshǐhuà cuòwù" msgid "SPI Re-initialization error" msgstr "SPI chóngxīn chūshǐhuà cuòwù" +#: ports/raspberrypi/common-hal/busio/SPI.c +msgid "SPI peripheral in use" +msgstr "SPI wài shè zhèng zài shǐ yòng zhōng" + #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "Cǎiyàng lǜ bìxū wèi zhèng shù" @@ -1832,6 +1955,14 @@ msgstr "Xùliè huà yǐjīng shǐyòngguò" msgid "Server side context cannot have hostname" msgstr "Fúwùqì duān shàngxiàwén bùnéng jùyǒu zhǔjī míng" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Set pin count must be between 1 and 5" +msgstr "shè zhì yǐn jiǎo shù bì xū jiè yú 1 hé 5 zhī jiān" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "Side set pin count must be between 1 and 5" +msgstr "cè miàn shè zhì yǐn jiǎo shù bì xū jiè yú 1 hé 5 zhī jiān" + #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "bù zhī chí dà xiǎo" @@ -2005,6 +2136,10 @@ msgstr "UART chūshǐhuà cuòwù" msgid "UART Re-init error" msgstr "UART chóngxīn chūshǐhuà cuòwù" +#: ports/raspberrypi/common-hal/busio/UART.c +msgid "UART not yet supported" +msgstr "UART shàng wèi shòu zhī chí" + #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "UART xiě cuòwù" @@ -2068,7 +2203,7 @@ msgstr "wú fǎ xiě rù sleep_memory。" msgid "Unexpected nrfx uuid type" msgstr "Yìwài de nrfx uuid lèixíng" -#: ports/esp32s2/common-hal/socketpool/Socket.c +#: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "Wèi chǔlǐ de ESP TLS cuòwù %d %d %x %d" @@ -2111,7 +2246,8 @@ msgstr "" "huò hūlüè." #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c -#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c +#: ports/esp32s2/common-hal/busio/UART.c +#: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Bù zhīchí de baudrate" @@ -2162,6 +2298,7 @@ msgid "WARNING: Your code filename has two extensions\n" msgstr "Jǐnggào: Nǐ de dàimǎ wénjiàn míng yǒu liǎng gè kuòzhǎn míng\n" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "Yīdàn jiāng móshì shèzhì wèi RESET, jiù wúfǎ chūshǐhuà WatchDog Timer" @@ -2374,7 +2511,7 @@ msgstr "huǎnchōng qū qiēpiàn bìxū chángdù xiāngděng" msgid "buffer too small" msgstr "huǎnchōng qū tài xiǎo" -#: shared-bindings/socketpool/Socket.c +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "huǎn chōng qū tài xiǎo, duì yú qǐng qiú de zì jié" @@ -3541,6 +3678,10 @@ msgstr "cóng kōng mài chōng tán chū" msgid "pop from empty %q" msgstr "cóng kōng %q dànchū" +#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c +msgid "port must be >= 0" +msgstr "duān kǒu bì xū wéi >= 0" + #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "pow() 3 cān shǔ bùnéng wéi 0" @@ -3557,6 +3698,7 @@ msgstr "pow() yǒu 3 cānshù xūyào zhěngshù" #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +#: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -3574,6 +3716,14 @@ msgstr "Zài qǐdòng shí àn qǐdòng ànniǔ.\n" msgid "pressing both buttons at start up.\n" msgstr "zài qǐdòng shí tóngshí àn xià liǎng gè ànniǔ.\n" +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "pull_threshold must be between 1 and 32" +msgstr "lā lì yù zhí bì xū jiè yú 1 hé 32 zhī jiān" + +#: ports/raspberrypi/bindings/rp2pio/StateMachine.c +msgid "push_threshold must be between 1 and 32" +msgstr "tuī sòng yù zhí bì xū jiè yú 1 hé 32 zhī jiān" + #: extmod/modutimeq.c msgid "queue overflow" msgstr "duìliè yìchū" @@ -3771,7 +3921,7 @@ msgstr "yùzhí bìxū zài fànwéi 0-65536" #: shared-bindings/rgbmatrix/RGBMatrix.c msgid "tile must be greater than zero" -msgstr "" +msgstr "cí tiē bì xū dà yú líng" #: shared-bindings/time/__init__.c msgid "time.struct_time() takes a 9-sequence" @@ -3779,6 +3929,7 @@ msgstr "time.struct_time() xūyào 9 xùliè" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c +#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "chāoshí shíjiān chāoguò zuìdà zhīchí zhí" @@ -4061,6 +4212,15 @@ msgstr "zi bìxū wèi fú diǎn xíng" msgid "zi must be of shape (n_section, 2)" msgstr "zi bìxū jùyǒu xíngzhuàng (n_section,2)" +#~ msgid "SDA or SCL needs a pull up" +#~ msgstr "SDA huò SCL xūyào lādòng" + +#~ msgid "Invalid use of TLS Socket" +#~ msgstr "TLS tào jiē zì de wú xiào shǐ yòng" + +#~ msgid "Issue setting SO_REUSEADDR" +#~ msgstr "wèn tí shè zhì SO_REUSEADDR" + #~ msgid "%d address pins and %d rgb pins indicate a height of %d, not %d" #~ msgstr "" #~ "%d dìzhǐ yǐn jiǎo hé %d rgb yǐn jiǎo jiāng gāodù biǎoshì wèi %d, ér bùshì " @@ -184,6 +184,7 @@ STATIC void stop_mp(void) { #endif background_callback_reset(); + usb_background(); gc_deinit(); } diff --git a/ports/atmel-samd/boards/arduino_zero/mpconfigboard.mk b/ports/atmel-samd/boards/arduino_zero/mpconfigboard.mk index a5722c9ad..697ec02c3 100644 --- a/ports/atmel-samd/boards/arduino_zero/mpconfigboard.mk +++ b/ports/atmel-samd/boards/arduino_zero/mpconfigboard.mk @@ -11,3 +11,4 @@ LONGINT_IMPL = NONE CIRCUITPY_FULL_BUILD = 0 SUPEROPT_GC = 0 +SUPEROPT_VM = 0 diff --git a/ports/atmel-samd/boards/dynalora_usb/board.c b/ports/atmel-samd/boards/dynalora_usb/board.c new file mode 100644 index 000000000..84960e73c --- /dev/null +++ b/ports/atmel-samd/boards/dynalora_usb/board.c @@ -0,0 +1,37 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "supervisor/board.h" + +void board_init(void) { +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { +} diff --git a/ports/atmel-samd/boards/dynalora_usb/mpconfigboard.h b/ports/atmel-samd/boards/dynalora_usb/mpconfigboard.h new file mode 100644 index 000000000..12359ce8f --- /dev/null +++ b/ports/atmel-samd/boards/dynalora_usb/mpconfigboard.h @@ -0,0 +1,36 @@ +#define MICROPY_HW_BOARD_NAME "DynaLoRa_USB" +#define MICROPY_HW_MCU_NAME "samd21e18" + +#define MICROPY_HW_LED_STATUS (&pin_PA27) +#define MICROPY_HW_NEOPIXEL (&pin_PA19) + +#define SPI_FLASH_MOSI_PIN &pin_PA04 +#define SPI_FLASH_MISO_PIN &pin_PA05 +#define SPI_FLASH_SCK_PIN &pin_PA07 +#define SPI_FLASH_CS_PIN &pin_PA06 + +// These are pins not to reset. +#define MICROPY_PORT_A (0) +#define MICROPY_PORT_B (0) +#define MICROPY_PORT_C (0) + +#define DEFAULT_I2C_BUS_SCL (&pin_PA01) +#define DEFAULT_I2C_BUS_SDA (&pin_PA00) + +#define DEFAULT_SPI_BUS_SCK (&pin_PA17) +#define DEFAULT_SPI_BUS_MOSI (&pin_PA16) +#define DEFAULT_SPI_BUS_MISO (&pin_PA18) + +#define DEFAULT_UART_BUS_RX (&pin_PA00) +#define DEFAULT_UART_BUS_TX (&pin_PA01) + +// USB is always used internally so skip the pin objects for it. +#define IGNORE_PIN_PA23 1 +#define IGNORE_PIN_PA24 1 + +// Not connected +#define IGNORE_PIN_PA08 1 +#define IGNORE_PIN_PA14 1 +#define IGNORE_PIN_PA21 1 +#define IGNORE_PIN_PA22 1 +#define IGNORE_PIN_PA28 1 diff --git a/ports/atmel-samd/boards/dynalora_usb/mpconfigboard.mk b/ports/atmel-samd/boards/dynalora_usb/mpconfigboard.mk new file mode 100644 index 000000000..ac14e7395 --- /dev/null +++ b/ports/atmel-samd/boards/dynalora_usb/mpconfigboard.mk @@ -0,0 +1,39 @@ +USB_VID = 0x04D8 +USB_PID = 0xEA2A +USB_PRODUCT = "DynaLoRa_USB" +USB_MANUFACTURER = "BHDynamics" + +CHIP_VARIANT = SAMD21E18A +CHIP_FAMILY = samd21 + +SPI_FLASH_FILESYSTEM = 1 +EXTERNAL_FLASH_DEVICE_COUNT = 1 +EXTERNAL_FLASH_DEVICES = GD25Q32C +LONGINT_IMPL = MPZ + +CIRCUITPY_AUDIOBUSIO = 0 +CIRCUITPY_FREQUENCYIO = 0 +CIRCUITPY_GAMEPAD = 0 +CIRCUITPY_DISPLAYIO = 0 +CIRCUITPY_FULL_BUILD = 0 + +SUPEROPT_GC = 0 + +CFLAGS_BOARD = --param max-inline-insns-auto=15 +ifeq ($(TRANSLATION), zh_Latn_pinyin) +RELEASE_NEEDS_CLEAN_BUILD = 1 +CFLAGS_INLINE_LIMIT = 35 +endif +ifeq ($(TRANSLATION), ja) +RELEASE_NEEDS_CLEAN_BUILD = 1 +CFLAGS_INLINE_LIMIT = 35 +endif +ifeq ($(TRANSLATION), de_DE) +RELEASE_NEEDS_CLEAN_BUILD = 1 +CFLAGS_INLINE_LIMIT = 35 +SUPEROPT_VM = 0 +endif + +FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel +FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_RFM9x +FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_SD diff --git a/ports/atmel-samd/boards/dynalora_usb/pins.c b/ports/atmel-samd/boards/dynalora_usb/pins.c new file mode 100644 index 000000000..25f498543 --- /dev/null +++ b/ports/atmel-samd/boards/dynalora_usb/pins.c @@ -0,0 +1,41 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PA00) }, + { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PA01) }, + { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PA02) }, + { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PA30) }, + { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PA31) }, + + { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA00) }, + { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA01) }, + { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA02) }, + + { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA16) }, + { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PA18) }, + { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA17) }, + { MP_ROM_QSTR(MP_QSTR_RADIO_CS), MP_ROM_PTR(&pin_PA11) }, + { MP_ROM_QSTR(MP_QSTR_RADIO_INT), MP_ROM_PTR(&pin_PA09) }, + { MP_ROM_QSTR(MP_QSTR_RADIO_RESET), MP_ROM_PTR(&pin_PA10) }, + + { MP_ROM_QSTR(MP_QSTR_SD_CS), MP_ROM_PTR(&pin_PA03) }, + + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA01) }, + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA00) }, + + { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PA01) }, + { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PA00) }, + + { MP_ROM_QSTR(MP_QSTR_MOSI1), MP_ROM_PTR(&pin_PA00) }, + { MP_ROM_QSTR(MP_QSTR_MISO1), MP_ROM_PTR(&pin_PA02) }, + { MP_ROM_QSTR(MP_QSTR_SCK1), MP_ROM_PTR(&pin_PA01) }, + + { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_PA27) }, + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA19) }, + { MP_ROM_QSTR(MP_QSTR_BUTTON), MP_ROM_PTR(&pin_PA15) }, + + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, + { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, + { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/atmel-samd/boards/seeeduino_xiao/mpconfigboard.mk b/ports/atmel-samd/boards/seeeduino_xiao/mpconfigboard.mk index bedec87f4..6bbd84235 100644 --- a/ports/atmel-samd/boards/seeeduino_xiao/mpconfigboard.mk +++ b/ports/atmel-samd/boards/seeeduino_xiao/mpconfigboard.mk @@ -11,3 +11,4 @@ LONGINT_IMPL = NONE CIRCUITPY_FULL_BUILD = 0 SUPEROPT_GC = 0 +SUPEROPT_VM = 0 diff --git a/ports/atmel-samd/boards/trinket_m0/mpconfigboard.mk b/ports/atmel-samd/boards/trinket_m0/mpconfigboard.mk index 735d42297..1f88fbead 100644 --- a/ports/atmel-samd/boards/trinket_m0/mpconfigboard.mk +++ b/ports/atmel-samd/boards/trinket_m0/mpconfigboard.mk @@ -11,14 +11,5 @@ LONGINT_IMPL = NONE CIRCUITPY_FULL_BUILD = 0 SUPEROPT_GC = 0 - -CFLAGS_BOARD = --param max-inline-insns-auto=15 -ifeq ($(TRANSLATION), zh_Latn_pinyin) -RELEASE_NEEDS_CLEAN_BUILD = 1 -CFLAGS_INLINE_LIMIT = 35 -endif -ifeq ($(TRANSLATION), de_DE) -RELEASE_NEEDS_CLEAN_BUILD = 1 -CFLAGS_INLINE_LIMIT = 35 SUPEROPT_VM = 0 -endif +CFLAGS_INLINE_LIMIT = 45 diff --git a/ports/atmel-samd/common-hal/_pew/PewPew.c b/ports/atmel-samd/common-hal/_pew/PewPew.c index cfdfe75d8..1e7561ac8 100644 --- a/ports/atmel-samd/common-hal/_pew/PewPew.c +++ b/ports/atmel-samd/common-hal/_pew/PewPew.c @@ -40,6 +40,7 @@ static uint8_t pewpew_tc_index = 0xff; +static volatile uint16_t pewpew_ticks = 0; void pewpew_interrupt_handler(uint8_t index) { @@ -52,6 +53,7 @@ void pewpew_interrupt_handler(uint8_t index) { } pew_tick(); + ++pewpew_ticks; // Clear the interrupt bit. tc->COUNT16.INTFLAG.reg = TC_INTFLAG_MC0; @@ -123,3 +125,7 @@ void pew_reset(void) { } MP_STATE_VM(pew_singleton) = NULL; } + +uint16_t pew_get_ticks() { + return pewpew_ticks; +} diff --git a/ports/atmel-samd/common-hal/_pew/PewPew.h b/ports/atmel-samd/common-hal/_pew/PewPew.h index da1cae0a2..a9c3b6626 100644 --- a/ports/atmel-samd/common-hal/_pew/PewPew.h +++ b/ports/atmel-samd/common-hal/_pew/PewPew.h @@ -44,5 +44,6 @@ typedef struct { void pew_init(void); void pewpew_interrupt_handler(uint8_t index); void pew_reset(void); +uint16_t pew_get_ticks(void); #endif // MICROPY_INCLUDED_PEW_PEWPEW_H diff --git a/ports/atmel-samd/common-hal/busio/I2C.c b/ports/atmel-samd/common-hal/busio/I2C.c index ffe74a274..2551f7bf1 100644 --- a/ports/atmel-samd/common-hal/busio/I2C.c +++ b/ports/atmel-samd/common-hal/busio/I2C.c @@ -97,7 +97,7 @@ void common_hal_busio_i2c_construct(busio_i2c_obj_t *self, if (!gpio_get_pin_level(sda->number) || !gpio_get_pin_level(scl->number)) { reset_pin_number(sda->number); reset_pin_number(scl->number); - mp_raise_RuntimeError(translate("SDA or SCL needs a pull up")); + mp_raise_RuntimeError(translate("No pull up found on SDA or SCL; check your wiring")); } #endif diff --git a/ports/esp32s2/Makefile b/ports/esp32s2/Makefile index aac934782..b4ff0612b 100644 --- a/ports/esp32s2/Makefile +++ b/ports/esp32s2/Makefile @@ -164,7 +164,9 @@ LIBS += -lm endif # TinyUSB defines -CFLAGS += -DCFG_TUSB_MCU=OPT_MCU_ESP32S2 -DCFG_TUSB_OS=OPT_OS_FREERTOS -DCFG_TUD_CDC_RX_BUFSIZE=1024 -DCFG_TUD_CDC_TX_BUFSIZE=1024 -DCFG_TUD_MSC_BUFSIZE=4096 -DCFG_TUD_MIDI_RX_BUFSIZE=128 -DCFG_TUD_MIDI_TX_BUFSIZE=128 +CFLAGS += -DCFG_TUSB_MCU=OPT_MCU_ESP32S2 -DCFG_TUSB_OS=OPT_OS_FREERTOS -DCFG_TUD_CDC_RX_BUFSIZE=1024 -DCFG_TUD_CDC_TX_BUFSIZE=1024 +CFLAGS += -DCFG_TUD_MSC_BUFSIZE=4096 -DCFG_TUD_MIDI_RX_BUFSIZE=128 -DCFG_TUD_MIDI_TX_BUFSIZE=128 +CFLAGS += -DCFG_TUD_VENDOR_RX_BUFSIZE=128 -DCFG_TUD_VENDOR_TX_BUFSIZE=128 ###################################### diff --git a/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.mk b/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.mk index 2dce03881..52c63cb9c 100644 --- a/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.mk +++ b/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.mk @@ -14,4 +14,10 @@ CIRCUITPY_ESP_FLASH_MODE=dio CIRCUITPY_ESP_FLASH_FREQ=80m CIRCUITPY_ESP_FLASH_SIZE=4MB +# We only have enough endpoints available in hardware to +# enable ONE of these at a time. +CIRCUITPY_USB_MIDI = 1 +CIRCUITPY_USB_HID = 0 +CIRCUITPY_USB_VENDOR = 0 + CIRCUITPY_MODULE=wrover diff --git a/ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/board.c b/ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/board.c index aaef97c7d..4aa7b3b24 100644 --- a/ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/board.c +++ b/ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/board.c @@ -27,6 +27,109 @@ #include "supervisor/board.h" #include "mpconfigboard.h" #include "shared-bindings/microcontroller/Pin.h" +#include "shared-module/displayio/__init__.h" +#include "shared-module/displayio/mipi_constants.h" + +#define DELAY 0x80 + +// display init sequence according to LilyGO example app +uint8_t display_init_sequence[] = { + // sw reset + 0x01, 0 | DELAY, 150, + // sleep out + 0x11, 0 | DELAY, 255, + // normal display mode on + 0x13, 0, + // display and color format settings + 0x36, 1, 0x08, + 0xB6, 2, 0x0A, 0x82, + 0x3A, 1 | DELAY, 0x55, 10, + // ST7789V frame rate setting + 0xB2, 5, 0x0C, 0x0C, 0x00, 0x33, 0x33, + // voltages: VGH / VGL + 0xB7, 1, 0x35, + // ST7789V power setting + 0xBB, 1, 0x28, + 0xC0, 1, 0x0C, + 0xC2, 2, 0x01, 0xFF, + 0xC3, 1, 0x10, + 0xC4, 1, 0x20, + 0xC6, 1, 0x0F, + 0xD0, 2, 0xA4, 0xA1, + // ST7789V gamma setting + 0xE0, 14, 0xD0, 0x00, 0x02, 0x07, 0x0A, 0x28, 0x32, 0x44, 0x42, 0x06, 0x0E, 0x12, 0x14, 0x17, + 0xE1, 14, 0xD0, 0x00, 0x02, 0x07, 0x0A, 0x28, 0x31, 0x54, 0x47, 0x0E, 0x1C, 0x17, 0x1B, 0x1E, + 0x21, 0, + // display on + 0x29, 0 | DELAY, 255, + }; + +static void display_init(void) { + busio_spi_obj_t* spi = &displays[0].fourwire_bus.inline_bus; + + common_hal_busio_spi_construct( + spi, + &pin_GPIO36, // CLK + &pin_GPIO35, // MOSI + NULL // MISO not connected + ); + + common_hal_busio_spi_never_reset(spi); + + displayio_fourwire_obj_t* bus = &displays[0].fourwire_bus; + bus->base.type = &displayio_fourwire_type; + + common_hal_displayio_fourwire_construct( + bus, + spi, + &pin_GPIO37, // DC + &pin_GPIO34, // CS + &pin_GPIO38, // RST + 40000000, // baudrate + 0, // polarity + 0 // phase + ); + + displayio_display_obj_t* display = &displays[0].display; + display->base.type = &displayio_display_type; + + // workaround as board_init() is called before reset_port() in main.c + pwmout_reset(); + + common_hal_displayio_display_construct( + display, + bus, + 240, // width (after rotation) + 135, // height (after rotation) + 52, // column start + 40, // row start + 90, // rotation + 16, // color depth + false, // grayscale + false, // pixels in a byte share a row. Only valid for depths < 8 + 1, // bytes per cell. Only valid for depths < 8 + false, // reverse_pixels_in_byte. Only valid for depths < 8 + true, // reverse_pixels_in_word + MIPI_COMMAND_SET_COLUMN_ADDRESS, // set column command + MIPI_COMMAND_SET_PAGE_ADDRESS, // set row command + MIPI_COMMAND_WRITE_MEMORY_START, // write memory command + 0x37, // set vertical scroll command + display_init_sequence, + sizeof(display_init_sequence), + &pin_GPIO33, // backlight pin + NO_BRIGHTNESS_COMMAND, + 1.0f, // brightness (ignored) + false, // auto_brightness + false, // single_byte_bounds + false, // data_as_commands + true, // auto_refresh + 60, // native_frames_per_second + true, // backlight_on_high + false // SH1107_addressing + ); + + common_hal_never_reset_pin(&pin_GPIO33); // backlight pin +} void board_init(void) { // USB @@ -38,6 +141,9 @@ void board_init(void) { common_hal_never_reset_pin(&pin_GPIO43); common_hal_never_reset_pin(&pin_GPIO44); #endif /* DEBUG */ + + // Display + display_init(); } bool board_requests_safe_mode(void) { diff --git a/ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/pins.c b/ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/pins.c index bda0fd227..a30c6797a 100644 --- a/ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/pins.c +++ b/ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/pins.c @@ -1,4 +1,5 @@ #include "shared-bindings/board/__init__.h" +#include "shared-module/displayio/__init__.h" STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_IO0), MP_ROM_PTR(&pin_GPIO0) }, @@ -41,13 +42,13 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_SD_CS), MP_ROM_PTR(&pin_GPIO10) }, // 1.14 inch LCD ST7789 - { MP_ROM_QSTR(MP_QSTR_LCD_MISO), MP_ROM_PTR(&pin_GPIO4) }, { MP_ROM_QSTR(MP_QSTR_LCD_MOSI), MP_ROM_PTR(&pin_GPIO35) }, { MP_ROM_QSTR(MP_QSTR_LCD_CLK), MP_ROM_PTR(&pin_GPIO36) }, { MP_ROM_QSTR(MP_QSTR_LCD_CS), MP_ROM_PTR(&pin_GPIO34) }, { MP_ROM_QSTR(MP_QSTR_LCD_RST), MP_ROM_PTR(&pin_GPIO38) }, { MP_ROM_QSTR(MP_QSTR_LCD_BCKL), MP_ROM_PTR(&pin_GPIO33) }, { MP_ROM_QSTR(MP_QSTR_LCD_D_C), MP_ROM_PTR(&pin_GPIO37) }, + { MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].display) }, // Peripheral Power control { MP_ROM_QSTR(MP_QSTR_PE_POWER), MP_ROM_PTR(&pin_GPIO14) }, diff --git a/ports/esp32s2/common-hal/alarm/__init__.c b/ports/esp32s2/common-hal/alarm/__init__.c index 1cec5d4ae..be435e210 100644 --- a/ports/esp32s2/common-hal/alarm/__init__.c +++ b/ports/esp32s2/common-hal/alarm/__init__.c @@ -150,6 +150,14 @@ void common_hal_alarm_set_deep_sleep_alarms(size_t n_alarms, const mp_obj_t *ala void NORETURN alarm_enter_deep_sleep(void) { alarm_pin_pinalarm_prepare_for_deep_sleep(); alarm_touch_touchalarm_prepare_for_deep_sleep(); + + // Disable brownout detection, which appears to be triggered sometimes when + // waking from deep sleep. + // See https://www.esp32.com/viewtopic.php?f=13&t=19208#p71084 + // and https://github.com/adafruit/circuitpython/issues/4025#issuecomment-771027606 + // TODO: We can remove this workaround when ESP-IDF handles this. + CLEAR_PERI_REG_MASK(RTC_CNTL_BROWN_OUT_REG, RTC_CNTL_BROWN_OUT_RST_ENA); + // The ESP-IDF caches the deep sleep settings and applies them before sleep. // We don't need to worry about resetting them in the interim. esp_deep_sleep_start(); diff --git a/ports/esp32s2/common-hal/audiobusio/I2SOut.c b/ports/esp32s2/common-hal/audiobusio/I2SOut.c index 86322be86..eb9b6f8e1 100644 --- a/ports/esp32s2/common-hal/audiobusio/I2SOut.c +++ b/ports/esp32s2/common-hal/audiobusio/I2SOut.c @@ -63,6 +63,9 @@ void common_hal_audiobusio_i2sout_construct(audiobusio_i2sout_obj_t* self, self->bit_clock = bit_clock; self->word_select = word_select; self->data = data; + claim_pin(bit_clock); + claim_pin(word_select); + claim_pin(data); } bool common_hal_audiobusio_i2sout_deinited(audiobusio_i2sout_obj_t* self) { diff --git a/ports/esp32s2/common-hal/busio/I2C.c b/ports/esp32s2/common-hal/busio/I2C.c index 772262d0a..8372eb8c3 100644 --- a/ports/esp32s2/common-hal/busio/I2C.c +++ b/ports/esp32s2/common-hal/busio/I2C.c @@ -85,7 +85,7 @@ void common_hal_busio_i2c_construct(busio_i2c_obj_t *self, if (gpio_get_level(sda->number) == 0 || gpio_get_level(scl->number) == 0) { reset_pin_number(sda->number); reset_pin_number(scl->number); - mp_raise_RuntimeError(translate("SDA or SCL needs a pull up")); + mp_raise_RuntimeError(translate("No pull up found on SDA or SCL; check your wiring")); } #endif diff --git a/ports/esp32s2/common-hal/socketpool/Socket.c b/ports/esp32s2/common-hal/socketpool/Socket.c index fc50ca3ab..5f93807bb 100644 --- a/ports/esp32s2/common-hal/socketpool/Socket.c +++ b/ports/esp32s2/common-hal/socketpool/Socket.c @@ -3,7 +3,6 @@ * * The MIT License (MIT) * - * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries * Copyright (c) 2020 Lucian Copeland for Adafruit Industries * * Permission is hereby granted, free of charge, to any person obtaining a copy @@ -38,16 +37,15 @@ #include "components/lwip/lwip/src/include/lwip/sys.h" #include "components/lwip/lwip/src/include/lwip/netdb.h" -STATIC socketpool_socket_obj_t * open_socket_handles[CONFIG_LWIP_MAX_SOCKETS]; // 4 on the wrover/wroom +STATIC socketpool_socket_obj_t * open_socket_handles[CONFIG_LWIP_MAX_SOCKETS]; void socket_reset(void) { for (size_t i = 0; i < MP_ARRAY_SIZE(open_socket_handles); i++) { if (open_socket_handles[i]) { if (open_socket_handles[i]->num > 0) { + // Close automatically clears socket handle common_hal_socketpool_socket_close(open_socket_handles[i]); - open_socket_handles[i] = NULL; } else { - // accidentally got a TCP socket in here, or something. open_socket_handles[i] = NULL; } } @@ -64,73 +62,14 @@ bool register_open_socket(socketpool_socket_obj_t* self) { return false; } -STATIC void _lazy_init_LWIP(socketpool_socket_obj_t* self) { - if (self->num != -1) { - return; //safe to call on existing socket - } - if (self->tls != NULL) { - mp_raise_RuntimeError(translate("Invalid use of TLS Socket")); - } - int socknum = -1; - socknum = lwip_socket(self->family, self->type, self->ipproto); - if (socknum < 0 || !register_open_socket(self)) { - mp_raise_RuntimeError(translate("Out of sockets")); - } - self->num = socknum; - lwip_fcntl(socknum, F_SETFL, O_NONBLOCK); -} - -STATIC void _lazy_init_TLS(socketpool_socket_obj_t* self) { - if (self->type != SOCK_STREAM || self->num != -1) { - mp_raise_RuntimeError(translate("Invalid socket for TLS")); - } - esp_tls_t* tls_handle = esp_tls_init(); - if (tls_handle == NULL) { - mp_raise_espidf_MemoryError(); - } - self->tls = tls_handle; -} - -void common_hal_socketpool_socket_settimeout(socketpool_socket_obj_t* self, mp_uint_t timeout_ms) { - self->timeout_ms = timeout_ms; -} - -bool common_hal_socketpool_socket_bind(socketpool_socket_obj_t* self, - const char* host, size_t hostlen, uint8_t port) { - _lazy_init_LWIP(self); - - struct sockaddr_in bind_addr; - bind_addr.sin_addr.s_addr = inet_addr(host); - bind_addr.sin_family = AF_INET; - bind_addr.sin_port = htons(port); - - int opt = 1; - int err = lwip_setsockopt(self->num, SOL_SOCKET, SO_REUSEADDR, &opt, sizeof(opt)); - if (err != 0) { - mp_raise_RuntimeError(translate("Issue setting SO_REUSEADDR")); - } - int result = lwip_bind(self->num, (struct sockaddr *)&bind_addr, sizeof(bind_addr)) == 0; - return result; -} - -bool common_hal_socketpool_socket_listen(socketpool_socket_obj_t* self, int backlog) { - return lwip_listen(self->num, backlog) == 0; -} - socketpool_socket_obj_t* common_hal_socketpool_socket_accept(socketpool_socket_obj_t* self, - uint8_t* ip, uint *port) { + uint8_t* ip, uint32_t *port) { struct sockaddr_in accept_addr; socklen_t socklen = sizeof(accept_addr); int newsoc = -1; bool timed_out = false; uint64_t start_ticks = supervisor_ticks_ms64(); - if (self->timeout_ms != (uint)-1) { - mp_printf(&mp_plat_print, "will timeout"); - } else { - mp_printf(&mp_plat_print, "won't timeout"); - } - // Allow timeouts and interrupts while (newsoc == -1 && !timed_out && @@ -140,7 +79,7 @@ socketpool_socket_obj_t* common_hal_socketpool_socket_accept(socketpool_socket_o } RUN_BACKGROUND_TASKS; newsoc = lwip_accept(self->num, (struct sockaddr *)&accept_addr, &socklen); - // In non-blocking mode, fail instead of looping + // In non-blocking mode, fail instead of timing out if (newsoc == -1 && self->timeout_ms == 0) { mp_raise_OSError(MP_EAGAIN); } @@ -159,9 +98,8 @@ socketpool_socket_obj_t* common_hal_socketpool_socket_accept(socketpool_socket_o socketpool_socket_obj_t *sock = m_new_obj_with_finaliser(socketpool_socket_obj_t); sock->base.type = &socketpool_socket_type; sock->num = newsoc; - sock->tls = NULL; - sock->ssl_context = NULL; sock->pool = self->pool; + sock->connected = true; if (!register_open_socket(sock)) { mp_raise_OSError(MP_EBADF); @@ -175,72 +113,136 @@ socketpool_socket_obj_t* common_hal_socketpool_socket_accept(socketpool_socket_o } } -bool common_hal_socketpool_socket_connect(socketpool_socket_obj_t* self, - const char* host, mp_uint_t hostlen, mp_int_t port) { - // For simplicity we use esp_tls for all TCP connections. If it's not SSL, ssl_context will be - // NULL and should still work. This makes regular TCP connections more memory expensive but TLS - // should become more and more common. Therefore, we optimize for the TLS case. +bool common_hal_socketpool_socket_bind(socketpool_socket_obj_t* self, + const char* host, size_t hostlen, uint32_t port) { + struct sockaddr_in bind_addr; + bind_addr.sin_addr.s_addr = inet_addr(host); + bind_addr.sin_family = AF_INET; + bind_addr.sin_port = htons(port); - // Todo: move to SSL Wrapper and add lwip_connect() - _lazy_init_TLS(self); + int opt = 1; + int err = lwip_setsockopt(self->num, SOL_SOCKET, SO_REUSEADDR, &opt, sizeof(opt)); + if (err != 0) { + mp_raise_RuntimeError(translate("Cannot set socket options")); + } + int result = lwip_bind(self->num, (struct sockaddr *)&bind_addr, sizeof(bind_addr)) == 0; + return result; +} - esp_tls_cfg_t* tls_config = NULL; - if (self->ssl_context != NULL) { - tls_config = &self->ssl_context->ssl_config; +void common_hal_socketpool_socket_close(socketpool_socket_obj_t* self) { + self->connected = false; + if (self->num >= 0) { + lwip_shutdown(self->num, 0); + lwip_close(self->num); + self->num = -1; } - int result = esp_tls_conn_new_sync(host, hostlen, port, tls_config, self->tls); - self->connected = result >= 0; - if (result < 0) { - int esp_tls_code; - int flags; - esp_err_t err = esp_tls_get_and_clear_last_error(self->tls->error_handle, &esp_tls_code, &flags); - - if (err == ESP_ERR_MBEDTLS_SSL_SETUP_FAILED) { - mp_raise_espidf_MemoryError(); - } else if (ESP_ERR_MBEDTLS_SSL_HANDSHAKE_FAILED) { - mp_raise_OSError_msg_varg(translate("Failed SSL handshake")); - } else { - mp_raise_OSError_msg_varg(translate("Unhandled ESP TLS error %d %d %x %d"), esp_tls_code, flags, err, result); + // Remove socket record + for (size_t i = 0; i < MP_ARRAY_SIZE(open_socket_handles); i++) { + if (open_socket_handles[i] == self) { + open_socket_handles[i] = NULL; } + } +} + +bool common_hal_socketpool_socket_connect(socketpool_socket_obj_t* self, + const char* host, size_t hostlen, uint32_t port) { + const struct addrinfo hints = { + .ai_family = AF_INET, + .ai_socktype = SOCK_STREAM, + }; + struct addrinfo *result_i; + int error = lwip_getaddrinfo(host, NULL, &hints, &result_i); + if (error != 0 || result_i == NULL) { + mp_raise_OSError(EHOSTUNREACH); + } + + // Set parameters + struct sockaddr_in dest_addr; + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wcast-align" + dest_addr.sin_addr.s_addr = ((struct sockaddr_in *)result_i->ai_addr)->sin_addr.s_addr; + #pragma GCC diagnostic pop + freeaddrinfo(result_i); + + dest_addr.sin_family = AF_INET; + dest_addr.sin_port = htons(port); + + // Replace above with function call ----- + + // Switch to blocking mode for this one call + int opts; + opts = lwip_fcntl(self->num,F_GETFL,0); + opts = opts & (~O_NONBLOCK); + lwip_fcntl(self->num, F_SETFL, opts); + + int result = -1; + result = lwip_connect(self->num, (struct sockaddr *)&dest_addr, sizeof(struct sockaddr_in)); + + // Switch back once complete + opts = opts | O_NONBLOCK; + lwip_fcntl(self->num, F_SETFL, opts); + + if (result >= 0) { + self->connected = true; + return true; } else { - // Connection successful, set the timeout on the underlying socket. We can't rely on the IDF - // to do it because the config structure is only used for TLS connections. Generally, we - // shouldn't hit this timeout because we try to only read available data. However, there is - // always a chance that we try to read something that is used internally. - int fd; - esp_tls_get_conn_sockfd(self->tls, &fd); - struct timeval tv; - tv.tv_sec = 2 * 60; // Two minutes - tv.tv_usec = 0; - setsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof(tv)); - setsockopt(fd, SOL_SOCKET, SO_SNDTIMEO, &tv, sizeof(tv)); + mp_raise_OSError(errno); } +} - return self->connected; +bool common_hal_socketpool_socket_get_closed(socketpool_socket_obj_t* self) { + return self->num < 0; } bool common_hal_socketpool_socket_get_connected(socketpool_socket_obj_t* self) { return self->connected; } -mp_uint_t common_hal_socketpool_socket_send(socketpool_socket_obj_t* self, const uint8_t* buf, mp_uint_t len) { - int sent = -1; - if (self->num != -1) { - // LWIP Socket - // TODO: deal with potential failure/add timeout? - sent = lwip_send(self->num, buf, len, 0); - } else if (self->tls != NULL) { - // TLS Socket - sent = esp_tls_conn_write(self->tls, buf, len); +bool common_hal_socketpool_socket_listen(socketpool_socket_obj_t* self, int backlog) { + return lwip_listen(self->num, backlog) == 0; +} + +mp_uint_t common_hal_socketpool_socket_recvfrom_into(socketpool_socket_obj_t* self, + uint8_t* buf, uint32_t len, uint8_t* ip, uint *port) { + + struct sockaddr_in source_addr; + socklen_t socklen = sizeof(source_addr); + + // LWIP Socket + uint64_t start_ticks = supervisor_ticks_ms64(); + int received = -1; + bool timed_out = false; + while (received == -1 && + !timed_out && + !mp_hal_is_interrupted()) { + if (self->timeout_ms != (uint)-1 && self->timeout_ms != 0) { + timed_out = supervisor_ticks_ms64() - start_ticks >= self->timeout_ms; + } + RUN_BACKGROUND_TASKS; + received = lwip_recvfrom(self->num, buf, len, 0, (struct sockaddr *)&source_addr, &socklen); + + // In non-blocking mode, fail instead of looping + if (received == -1 && self->timeout_ms == 0) { + mp_raise_OSError(MP_EAGAIN); + } } - if (sent < 0) { - mp_raise_OSError(MP_ENOTCONN); + if (!timed_out) { + memcpy((void *)ip, (void*)&source_addr.sin_addr.s_addr, sizeof(source_addr.sin_addr.s_addr)); + *port = source_addr.sin_port; + } else { + mp_raise_OSError(ETIMEDOUT); } - return sent; + + if (received < 0) { + mp_raise_BrokenPipeError(); + return 0; + } + + return received; } -mp_uint_t common_hal_socketpool_socket_recv_into(socketpool_socket_obj_t* self, const uint8_t* buf, mp_uint_t len) { +mp_uint_t common_hal_socketpool_socket_recv_into(socketpool_socket_obj_t* self, const uint8_t* buf, uint32_t len) { int received = 0; bool timed_out = false; @@ -255,54 +257,14 @@ mp_uint_t common_hal_socketpool_socket_recv_into(socketpool_socket_obj_t* self, timed_out = supervisor_ticks_ms64() - start_ticks >= self->timeout_ms; } RUN_BACKGROUND_TASKS; - received = lwip_recv(self->num, (void*) buf, len - 1, 0); + received = lwip_recv(self->num, (void*) buf, len, 0); // In non-blocking mode, fail instead of looping if (received == -1 && self->timeout_ms == 0) { mp_raise_OSError(MP_EAGAIN); } } - } else if (self->tls != NULL) { - // TLS Socket - int status = 0; - uint64_t start_ticks = supervisor_ticks_ms64(); - int sockfd; - esp_err_t err = esp_tls_get_conn_sockfd(self->tls, &sockfd); - if (err != ESP_OK) { - mp_raise_OSError(MP_EBADF); - } - while (received == 0 && - status >= 0 && - !timed_out && - !mp_hal_is_interrupted()) { - if (self->timeout_ms != (uint)-1) { - timed_out = self->timeout_ms == 0 || supervisor_ticks_ms64() - start_ticks >= self->timeout_ms; - } - RUN_BACKGROUND_TASKS; - size_t available = esp_tls_get_bytes_avail(self->tls); - if (available == 0) { - // This reads the raw socket buffer and is used for non-TLS connections - // and between encrypted TLS blocks. - status = lwip_ioctl(sockfd, FIONREAD, &available); - } - size_t remaining = len - received; - if (available > remaining) { - available = remaining; - } - if (available > 0) { - status = esp_tls_conn_read(self->tls, (void*) buf + received, available); - if (status == 0) { - // Reading zero when something is available indicates a closed - // connection. (The available bytes could have been TLS internal.) - break; - } - if (status > 0) { - received += status; - } - } - } } else { - // Socket does not have a valid descriptor of either type mp_raise_OSError(MP_EBADF); } @@ -312,29 +274,43 @@ mp_uint_t common_hal_socketpool_socket_recv_into(socketpool_socket_obj_t* self, return received; } -mp_uint_t common_hal_socketpool_socket_sendto(socketpool_socket_obj_t* self, - const char* host, size_t hostlen, uint8_t port, const uint8_t* buf, mp_uint_t len) { +mp_uint_t common_hal_socketpool_socket_send(socketpool_socket_obj_t* self, const uint8_t* buf, uint32_t len) { + int sent = -1; + if (self->num != -1) { + // LWIP Socket + // TODO: deal with potential failure/add timeout? + sent = lwip_send(self->num, buf, len, 0); + } else { + mp_raise_OSError(MP_EBADF); + } - _lazy_init_LWIP(self); + if (sent < 0) { + mp_raise_OSError(errno); + } + return sent; +} - // Get the IP address string +mp_uint_t common_hal_socketpool_socket_sendto(socketpool_socket_obj_t* self, + const char* host, size_t hostlen, uint32_t port, const uint8_t* buf, uint32_t len) { + + // Set parameters const struct addrinfo hints = { .ai_family = AF_INET, .ai_socktype = SOCK_STREAM, }; - struct addrinfo *result; - int error = lwip_getaddrinfo(host, NULL, &hints, &result); - if (error != 0 || result == NULL) { - return 0; + struct addrinfo *result_i; + int error = lwip_getaddrinfo(host, NULL, &hints, &result_i); + if (error != 0 || result_i == NULL) { + mp_raise_OSError(EHOSTUNREACH); } // Set parameters struct sockaddr_in dest_addr; #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wcast-align" - dest_addr.sin_addr.s_addr = ((struct sockaddr_in *)result->ai_addr)->sin_addr.s_addr; + dest_addr.sin_addr.s_addr = ((struct sockaddr_in *)result_i->ai_addr)->sin_addr.s_addr; #pragma GCC diagnostic pop - freeaddrinfo(result); + freeaddrinfo(result_i); dest_addr.sin_family = AF_INET; dest_addr.sin_port = htons(port); @@ -347,66 +323,6 @@ mp_uint_t common_hal_socketpool_socket_sendto(socketpool_socket_obj_t* self, return bytes_sent; } -mp_uint_t common_hal_socketpool_socket_recvfrom_into(socketpool_socket_obj_t* self, - uint8_t* buf, mp_uint_t len, uint8_t* ip, uint *port) { - - _lazy_init_LWIP(self); - - struct sockaddr_in source_addr; - socklen_t socklen = sizeof(source_addr); - - // LWIP Socket - uint64_t start_ticks = supervisor_ticks_ms64(); - int received = -1; - bool timed_out = false; - while (received == -1 && - !timed_out && - !mp_hal_is_interrupted()) { - if (self->timeout_ms != (uint)-1 && self->timeout_ms != 0) { - timed_out = supervisor_ticks_ms64() - start_ticks >= self->timeout_ms; - } - RUN_BACKGROUND_TASKS; - received = lwip_recvfrom(self->num, buf, len, 0, (struct sockaddr *)&source_addr, &socklen); - - // In non-blocking mode, fail instead of looping - if (received == -1 && self->timeout_ms == 0) { - mp_raise_OSError(MP_EAGAIN); - } - } - - if (!timed_out) { - memcpy((void *)ip, (void*)&source_addr.sin_addr.s_addr, sizeof(source_addr.sin_addr.s_addr)); - *port = source_addr.sin_port; - } else { - mp_raise_OSError(ETIMEDOUT); - } - - if (received < 0) { - mp_raise_BrokenPipeError(); - return 0; - } - - return received; -} - -void common_hal_socketpool_socket_close(socketpool_socket_obj_t* self) { - self->connected = false; - if (self->tls != NULL) { - esp_tls_conn_destroy(self->tls); - self->tls = NULL; - } - if (self->num >= 0) { - lwip_shutdown(self->num, 0); - lwip_close(self->num); - self->num = -1; - } -} - -bool common_hal_socketpool_socket_get_closed(socketpool_socket_obj_t* self) { - return self->tls == NULL && self->num < 0; -} - - -mp_uint_t common_hal_socketpool_socket_get_hash(socketpool_socket_obj_t* self) { - return self->num; +void common_hal_socketpool_socket_settimeout(socketpool_socket_obj_t* self, uint32_t timeout_ms) { + self->timeout_ms = timeout_ms; } diff --git a/ports/esp32s2/common-hal/socketpool/Socket.h b/ports/esp32s2/common-hal/socketpool/Socket.h index 4e6cfa5ef..b86f5597c 100644 --- a/ports/esp32s2/common-hal/socketpool/Socket.h +++ b/ports/esp32s2/common-hal/socketpool/Socket.h @@ -41,8 +41,6 @@ typedef struct { int family; int ipproto; bool connected; - esp_tls_t* tls; - ssl_sslcontext_obj_t* ssl_context; socketpool_socketpool_obj_t* pool; mp_uint_t timeout_ms; } socketpool_socket_obj_t; diff --git a/ports/esp32s2/common-hal/socketpool/SocketPool.c b/ports/esp32s2/common-hal/socketpool/SocketPool.c index 70a8b4eca..fbd6dca7a 100644 --- a/ports/esp32s2/common-hal/socketpool/SocketPool.c +++ b/ports/esp32s2/common-hal/socketpool/SocketPool.c @@ -25,6 +25,7 @@ */ #include "shared-bindings/socketpool/SocketPool.h" +#include "common-hal/socketpool/Socket.h" #include "py/runtime.h" #include "shared-bindings/wifi/__init__.h" @@ -65,23 +66,23 @@ socketpool_socket_obj_t* common_hal_socketpool_socket(socketpool_socketpool_obj_ mp_raise_NotImplementedError(translate("Only IPv4 sockets supported")); } - // Consider LWIP and MbedTLS "variant" sockets to be incompatible (for now) - // The variant of the socket is determined by whether the socket is wrapped - // by SSL. If no TLS handle is set in sslcontext_wrap_socket, the first call - // of bind() or connect() will create a LWIP socket with a corresponding - // socketnum. - // TODO: move MbedTLS to its own duplicate Socket or Server API, maybe? socketpool_socket_obj_t *sock = m_new_obj_with_finaliser(socketpool_socket_obj_t); sock->base.type = &socketpool_socket_type; - sock->num = -1; sock->type = socket_type; sock->family = addr_family; sock->ipproto = ipproto; + sock->pool = self; sock->timeout_ms = (uint)-1; - sock->tls = NULL; - sock->ssl_context = NULL; - sock->pool = self; + // Create LWIP socket + int socknum = -1; + socknum = lwip_socket(sock->family, sock->type, sock->ipproto); + if (socknum < 0 || !register_open_socket(sock)) { + mp_raise_RuntimeError(translate("Out of sockets")); + } + sock->num = socknum; + // Sockets should be nonblocking in most cases + lwip_fcntl(socknum, F_SETFL, O_NONBLOCK); return sock; } diff --git a/ports/esp32s2/common-hal/ssl/SSLContext.c b/ports/esp32s2/common-hal/ssl/SSLContext.c index e24fd338b..afc3ecce2 100644 --- a/ports/esp32s2/common-hal/ssl/SSLContext.c +++ b/ports/esp32s2/common-hal/ssl/SSLContext.c @@ -25,6 +25,9 @@ */ #include "shared-bindings/ssl/SSLContext.h" +#include "shared-bindings/ssl/SSLSocket.h" + +#include "bindings/espidf/__init__.h" #include "py/runtime.h" @@ -32,10 +35,26 @@ void common_hal_ssl_sslcontext_construct(ssl_sslcontext_obj_t* self) { } -socketpool_socket_obj_t* common_hal_ssl_sslcontext_wrap_socket(ssl_sslcontext_obj_t* self, +ssl_sslsocket_obj_t* common_hal_ssl_sslcontext_wrap_socket(ssl_sslcontext_obj_t* self, socketpool_socket_obj_t* socket, bool server_side, const char* server_hostname) { - socket->ssl_context = self; + if (socket->type != SOCK_STREAM) { + mp_raise_RuntimeError(translate("Invalid socket for TLS")); + } + + ssl_sslsocket_obj_t *sock = m_new_obj_with_finaliser(ssl_sslsocket_obj_t); + sock->base.type = &ssl_sslsocket_type; + sock->ssl_context = self; + sock->sock = socket; + + esp_tls_t* tls_handle = esp_tls_init(); + if (tls_handle == NULL) { + mp_raise_espidf_MemoryError(); + } + sock->tls = tls_handle; + + // TODO: do something with the original socket? Don't call a close on the internal LWIP. + // Should we store server hostname on the socket in case connect is called with an ip? - return socket; + return sock; } diff --git a/ports/esp32s2/common-hal/ssl/SSLSocket.c b/ports/esp32s2/common-hal/ssl/SSLSocket.c new file mode 100644 index 000000000..10c29108c --- /dev/null +++ b/ports/esp32s2/common-hal/ssl/SSLSocket.c @@ -0,0 +1,176 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries + * Copyright (c) 2021 Lucian Copeland for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "shared-bindings/ssl/SSLSocket.h" +#include "shared-bindings/socketpool/Socket.h" +#include "shared-bindings/ssl/SSLContext.h" + +#include "bindings/espidf/__init__.h" +#include "lib/utils/interrupt_char.h" +#include "py/mperrno.h" +#include "py/runtime.h" +#include "supervisor/shared/tick.h" + +ssl_sslsocket_obj_t* common_hal_ssl_sslsocket_accept(ssl_sslsocket_obj_t* self, + uint8_t* ip, uint32_t *port) { + socketpool_socket_obj_t * sock = common_hal_socketpool_socket_accept(self->sock, ip, port); + ssl_sslsocket_obj_t * sslsock = common_hal_ssl_sslcontext_wrap_socket(self->ssl_context, sock, false, NULL); + return sslsock; +} + +bool common_hal_ssl_sslsocket_bind(ssl_sslsocket_obj_t* self, + const char* host, size_t hostlen, uint32_t port) { + return common_hal_socketpool_socket_bind(self->sock, host, hostlen, port); +} + +void common_hal_ssl_sslsocket_close(ssl_sslsocket_obj_t* self) { + common_hal_socketpool_socket_close(self->sock); + esp_tls_conn_destroy(self->tls); + self->tls = NULL; +} + +bool common_hal_ssl_sslsocket_connect(ssl_sslsocket_obj_t* self, + const char* host, size_t hostlen, uint32_t port) { + esp_tls_cfg_t* tls_config = NULL; + tls_config = &self->ssl_context->ssl_config; + int result = esp_tls_conn_new_sync(host, hostlen, port, tls_config, self->tls); + self->sock->connected = result >= 0; + if (result < 0) { + int esp_tls_code; + int flags; + esp_err_t err = esp_tls_get_and_clear_last_error(self->tls->error_handle, &esp_tls_code, &flags); + + if (err == ESP_ERR_MBEDTLS_SSL_SETUP_FAILED) { + mp_raise_espidf_MemoryError(); + } else if (ESP_ERR_MBEDTLS_SSL_HANDSHAKE_FAILED) { + mp_raise_OSError_msg_varg(translate("Failed SSL handshake")); + } else { + mp_raise_OSError_msg_varg(translate("Unhandled ESP TLS error %d %d %x %d"), esp_tls_code, flags, err, result); + } + } else { + // Connection successful, set the timeout on the underlying socket. We can't rely on the IDF + // to do it because the config structure is only used for TLS connections. Generally, we + // shouldn't hit this timeout because we try to only read available data. However, there is + // always a chance that we try to read something that is used internally. + int fd; + esp_tls_get_conn_sockfd(self->tls, &fd); + struct timeval tv; + tv.tv_sec = 2 * 60; // Two minutes + tv.tv_usec = 0; + setsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof(tv)); + setsockopt(fd, SOL_SOCKET, SO_SNDTIMEO, &tv, sizeof(tv)); + } + + return self->sock->connected; +} + +bool common_hal_ssl_sslsocket_get_closed(ssl_sslsocket_obj_t* self) { + return self->tls == NULL && self->sock->num < 0; +} + +bool common_hal_ssl_sslsocket_get_connected(ssl_sslsocket_obj_t* self) { + return self->sock->connected; +} + +bool common_hal_ssl_sslsocket_listen(ssl_sslsocket_obj_t* self, int backlog) { + return common_hal_socketpool_socket_listen(self->sock, backlog); +} + +mp_uint_t common_hal_ssl_sslsocket_recv_into(ssl_sslsocket_obj_t* self, const uint8_t* buf, uint32_t len) { + int received = 0; + bool timed_out = false; + int status = 0; + uint64_t start_ticks = supervisor_ticks_ms64(); + int sockfd; + esp_err_t err = esp_tls_get_conn_sockfd(self->tls, &sockfd); + if (err != ESP_OK) { + mp_raise_OSError(MP_EBADF); + } + while (received == 0 && + status >= 0 && + !timed_out && + !mp_hal_is_interrupted()) { + if (self->sock->timeout_ms != (uint)-1 && self->sock->timeout_ms != 0) { + timed_out = self->sock->timeout_ms == 0 || supervisor_ticks_ms64() - start_ticks >= self->sock->timeout_ms; + } + RUN_BACKGROUND_TASKS; + size_t available = esp_tls_get_bytes_avail(self->tls); + if (available == 0) { + // This reads the raw socket buffer and is used for non-TLS connections + // and between encrypted TLS blocks. + status = lwip_ioctl(sockfd, FIONREAD, &available); + } + size_t remaining = len - received; + if (available > remaining) { + available = remaining; + } + if (available > 0) { + status = esp_tls_conn_read(self->tls, (void*) buf + received, available); + if (status == 0) { + // Reading zero when something is available indicates a closed + // connection. (The available bytes could have been TLS internal.) + break; + } + if (status > 0) { + received += status; + } + } + // In non-blocking mode, fail instead of timing out + if (received==0 && self->sock->timeout_ms == 0) { + mp_raise_OSError(MP_EAGAIN); + } + } + + if (timed_out) { + mp_raise_OSError(ETIMEDOUT); + } + return received; +} + +mp_uint_t common_hal_ssl_sslsocket_send(ssl_sslsocket_obj_t* self, const uint8_t* buf, uint32_t len) { + int sent = -1; + sent = esp_tls_conn_write(self->tls, buf, len); + + if (sent < 0) { + int esp_tls_code; + int flags; + esp_err_t err = esp_tls_get_and_clear_last_error(self->tls->error_handle, &esp_tls_code, &flags); + + if (err == ESP_ERR_MBEDTLS_SSL_SETUP_FAILED) { + mp_raise_espidf_MemoryError(); + } else if (ESP_ERR_MBEDTLS_SSL_HANDSHAKE_FAILED) { + mp_raise_OSError_msg_varg(translate("Failed SSL handshake")); + } else { + mp_raise_OSError_msg_varg(translate("Unhandled ESP TLS error %d %d %x %d"), esp_tls_code, flags, err, sent); + } + } + return sent; +} + +void common_hal_ssl_sslsocket_settimeout(ssl_sslsocket_obj_t* self, uint32_t timeout_ms) { + self->sock->timeout_ms = timeout_ms; +} diff --git a/ports/esp32s2/common-hal/ssl/SSLSocket.h b/ports/esp32s2/common-hal/ssl/SSLSocket.h new file mode 100644 index 000000000..e9e5bff06 --- /dev/null +++ b/ports/esp32s2/common-hal/ssl/SSLSocket.h @@ -0,0 +1,44 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Lucian Copeland for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_ESP32S2_COMMON_HAL_SSL_SSLSOCKET_H +#define MICROPY_INCLUDED_ESP32S2_COMMON_HAL_SSL_SSLSOCKET_H + +#include "py/obj.h" + +#include "common-hal/ssl/SSLContext.h" +#include "common-hal/socketpool/Socket.h" + +#include "components/esp-tls/esp_tls.h" + +typedef struct { + mp_obj_base_t base; + socketpool_socket_obj_t * sock; + esp_tls_t* tls; + ssl_sslcontext_obj_t* ssl_context; +} ssl_sslsocket_obj_t; + +#endif // MICROPY_INCLUDED_ESP32S2_COMMON_HAL_SSL_SSLSOCKET_H diff --git a/ports/esp32s2/mpconfigport.mk b/ports/esp32s2/mpconfigport.mk index 562c60998..b273c02ee 100644 --- a/ports/esp32s2/mpconfigport.mk +++ b/ports/esp32s2/mpconfigport.mk @@ -29,7 +29,10 @@ CIRCUITPY_I2CPERIPHERAL = 0 CIRCUITPY_ROTARYIO = 1 CIRCUITPY_NVM = 1 # We don't have enough endpoints to include MIDI. -CIRCUITPY_USB_MIDI = 0 +CIRCUITPY_USB_MIDI ?= 0 +CIRCUITPY_USB_HID ?= 1 +# We have borrowed the VENDOR nomenclature from tinyusb. VENDOR AKA WEBUSB +CIRCUITPY_USB_VENDOR ?= 0 CIRCUITPY_WIFI = 1 CIRCUITPY_WATCHDOG ?= 1 CIRCUITPY_ESPIDF = 1 diff --git a/ports/mimxrt10xx/common-hal/busio/I2C.c b/ports/mimxrt10xx/common-hal/busio/I2C.c index aaa2549a8..c8daddc4b 100644 --- a/ports/mimxrt10xx/common-hal/busio/I2C.c +++ b/ports/mimxrt10xx/common-hal/busio/I2C.c @@ -110,7 +110,7 @@ void common_hal_busio_i2c_construct(busio_i2c_obj_t *self, if( !GPIO_PinRead(sda->gpio, sda->number) || !GPIO_PinRead(scl->gpio, scl->number)) { common_hal_reset_pin(sda); common_hal_reset_pin(scl); - mp_raise_RuntimeError(translate("SDA or SCL needs a pull up")); + mp_raise_RuntimeError(translate("No pull up found on SDA or SCL; check your wiring")); } #endif diff --git a/ports/mimxrt10xx/common-hal/busio/SPI.c b/ports/mimxrt10xx/common-hal/busio/SPI.c index ce7cbea7e..00d8d9867 100644 --- a/ports/mimxrt10xx/common-hal/busio/SPI.c +++ b/ports/mimxrt10xx/common-hal/busio/SPI.c @@ -38,6 +38,8 @@ #define LPSPI_MASTER_CLK_FREQ (CLOCK_GetFreq(kCLOCK_Usb1PllPfd0Clk) / (CLOCK_GetDiv(kCLOCK_LpspiDiv) + 1)) +#define MAX_SPI_BUSY_RETRIES 100 + //arrays use 0 based numbering: SPI1 is stored at index 0 #define MAX_SPI 4 STATIC bool reserved_spi[MAX_SPI]; @@ -289,7 +291,12 @@ bool common_hal_busio_spi_write(busio_spi_obj_t *self, xfer.dataSize = len; xfer.configFlags = kLPSPI_MasterPcs0; - const status_t status = LPSPI_MasterTransferBlocking(self->spi, &xfer); + status_t status; + int retries = MAX_SPI_BUSY_RETRIES; + do { + status = LPSPI_MasterTransferBlocking(self->spi, &xfer); + } while (status == kStatus_LPSPI_Busy && --retries > 0); + if (status != kStatus_Success) printf("%s: status %ld\r\n", __func__, status); @@ -311,7 +318,12 @@ bool common_hal_busio_spi_read(busio_spi_obj_t *self, xfer.rxData = data; xfer.dataSize = len; - const status_t status = LPSPI_MasterTransferBlocking(self->spi, &xfer); + status_t status; + int retries = MAX_SPI_BUSY_RETRIES; + do { + status = LPSPI_MasterTransferBlocking(self->spi, &xfer); + } while (status == kStatus_LPSPI_Busy && --retries > 0); + if (status != kStatus_Success) printf("%s: status %ld\r\n", __func__, status); @@ -333,7 +345,12 @@ bool common_hal_busio_spi_transfer(busio_spi_obj_t *self, const uint8_t *data_ou xfer.rxData = data_in; xfer.dataSize = len; - const status_t status = LPSPI_MasterTransferBlocking(self->spi, &xfer); + status_t status; + int retries = MAX_SPI_BUSY_RETRIES; + do { + status = LPSPI_MasterTransferBlocking(self->spi, &xfer); + } while (status == kStatus_LPSPI_Busy && --retries > 0); + if (status != kStatus_Success) printf("%s: status %ld\r\n", __func__, status); diff --git a/ports/nrf/boards/simmel/mpconfigboard.mk b/ports/nrf/boards/simmel/mpconfigboard.mk index 032caac40..6bc05a7f0 100644 --- a/ports/nrf/boards/simmel/mpconfigboard.mk +++ b/ports/nrf/boards/simmel/mpconfigboard.mk @@ -3,6 +3,8 @@ USB_PID = 0xc051 USB_PRODUCT = "Simmel" USB_MANUFACTURER = "Betrusted" +CIRCUITPY_DEVICES="CDC,MSC,HID" + MCU_CHIP = nrf52833 # SPI_FLASH_FILESYSTEM = 1 @@ -29,6 +31,7 @@ CIRCUITPY_RTC = 1 CIRCUITPY_SDCARDIO = 0 CIRCUITPY_TOUCHIO = 0 CIRCUITPY_ULAB = 0 +CIRCUITPY_USB_MIDI = 0 CIRCUITPY_WATCHDOG = 1 # Enable micropython.native diff --git a/ports/nrf/common-hal/busio/I2C.c b/ports/nrf/common-hal/busio/I2C.c index 37cb192df..654fa857f 100644 --- a/ports/nrf/common-hal/busio/I2C.c +++ b/ports/nrf/common-hal/busio/I2C.c @@ -131,7 +131,7 @@ void common_hal_busio_i2c_construct(busio_i2c_obj_t *self, const mcu_pin_obj_t * if (!nrf_gpio_pin_read(sda->number) || !nrf_gpio_pin_read(scl->number)) { reset_pin_number(sda->number); reset_pin_number(scl->number); - mp_raise_RuntimeError(translate("SDA or SCL needs a pull up")); + mp_raise_RuntimeError(translate("No pull up found on SDA or SCL; check your wiring")); } #endif diff --git a/ports/nrf/common-hal/busio/UART.c b/ports/nrf/common-hal/busio/UART.c index 012ebc3b5..6ecf7e0ba 100644 --- a/ports/nrf/common-hal/busio/UART.c +++ b/ports/nrf/common-hal/busio/UART.c @@ -36,6 +36,7 @@ #include "supervisor/shared/translate.h" #include "nrfx_uarte.h" +#include "nrf_gpio.h" #include <string.h> // expression to examine, and return value in case of failing @@ -98,10 +99,16 @@ static void uart_callback_irq (const nrfx_uarte_event_t * event, void * context) switch ( event->type ) { case NRFX_UARTE_EVT_RX_DONE: - ringbuf_put_n(&self->ringbuf, event->data.rxtx.p_data, event->data.rxtx.bytes); + if (ringbuf_num_empty(&self->ringbuf) >= event->data.rxtx.bytes) { + ringbuf_put_n(&self->ringbuf, event->data.rxtx.p_data, event->data.rxtx.bytes); + // keep receiving + (void) nrfx_uarte_rx(self->uarte, &self->rx_char, 1); + } else { + // receive buffer full, suspend + self->rx_paused = true; + nrf_gpio_pin_write(self->rts_pin_number, true); + } - // keep receiving - (void) nrfx_uarte_rx(self->uarte, &self->rx_char, 1); break; case NRFX_UARTE_EVT_TX_DONE: @@ -137,8 +144,8 @@ void common_hal_busio_uart_construct(busio_uart_obj_t *self, mp_float_t timeout, uint16_t receiver_buffer_size, byte* receiver_buffer, bool sigint_enabled) { - if ((rts != NULL) || (cts != NULL) || (rs485_dir != NULL) || (rs485_invert)) { - mp_raise_ValueError(translate("RTS/CTS/RS485 Not yet supported on this device")); + if ((rs485_dir != NULL) || (rs485_invert)) { + mp_raise_ValueError(translate("RS485 Not yet supported on this device")); } // Find a free UART peripheral. @@ -166,16 +173,18 @@ void common_hal_busio_uart_construct(busio_uart_obj_t *self, mp_raise_ValueError(translate("Odd parity is not supported")); } + bool hwfc = rts != NULL || cts != NULL; + nrfx_uarte_config_t config = { .pseltxd = (tx == NULL) ? NRF_UARTE_PSEL_DISCONNECTED : tx->number, .pselrxd = (rx == NULL) ? NRF_UARTE_PSEL_DISCONNECTED : rx->number, - .pselcts = NRF_UARTE_PSEL_DISCONNECTED, - .pselrts = NRF_UARTE_PSEL_DISCONNECTED, + .pselcts = (cts == NULL) ? NRF_UARTE_PSEL_DISCONNECTED : cts->number, + .pselrts = (rts == NULL) ? NRF_UARTE_PSEL_DISCONNECTED : rts->number, .p_context = self, .baudrate = get_nrf_baud(baudrate), .interrupt_priority = 7, .hal_cfg = { - .hwfc = NRF_UARTE_HWFC_DISABLED, + .hwfc = hwfc ? NRF_UARTE_HWFC_ENABLED : NRF_UARTE_HWFC_DISABLED, .parity = (parity == BUSIO_UART_PARITY_NONE) ? NRF_UARTE_PARITY_EXCLUDED : NRF_UARTE_PARITY_INCLUDED } }; @@ -207,9 +216,25 @@ void common_hal_busio_uart_construct(busio_uart_obj_t *self, self->tx_pin_number = NO_PIN; } + if ( rts != NULL ) { + self->rts_pin_number = rts->number; + claim_pin(rts); + } else { + self->rts_pin_number = NO_PIN; + } + + if ( cts != NULL ) { + self->cts_pin_number = cts->number; + claim_pin(cts); + } else { + self->cts_pin_number = NO_PIN; + } + self->baudrate = baudrate; self->timeout_ms = timeout * 1000; + self->rx_paused = false; + // Initial wait for incoming byte _VERIFY_ERR(nrfx_uarte_rx(self->uarte, &self->rx_char, 1)); } @@ -223,8 +248,12 @@ void common_hal_busio_uart_deinit(busio_uart_obj_t *self) { nrfx_uarte_uninit(self->uarte); reset_pin_number(self->tx_pin_number); reset_pin_number(self->rx_pin_number); + reset_pin_number(self->rts_pin_number); + reset_pin_number(self->cts_pin_number); self->tx_pin_number = NO_PIN; self->rx_pin_number = NO_PIN; + self->rts_pin_number = NO_PIN; + self->cts_pin_number = NO_PIN; ringbuf_free(&self->ringbuf); } } @@ -237,6 +266,13 @@ size_t common_hal_busio_uart_read(busio_uart_obj_t *self, uint8_t *data, size_t uint64_t start_ticks = supervisor_ticks_ms64(); + // check removed to reduce code size + /* + if (len > ringbuf_capacity(&self->ringbuf)) { + mp_raise_ValueError(translate("Reading >receiver_buffer_size bytes is not supported")); + } + */ + // Wait for all bytes received or timeout while ( (ringbuf_num_filled(&self->ringbuf) < len) && (supervisor_ticks_ms64() - start_ticks < self->timeout_ms) ) { RUN_BACKGROUND_TASKS; @@ -252,6 +288,16 @@ size_t common_hal_busio_uart_read(busio_uart_obj_t *self, uint8_t *data, size_t // Copy as much received data as available, up to len bytes. size_t rx_bytes = ringbuf_get_n(&self->ringbuf, data, len); + // restart reader, if stopped + if (self->rx_paused) { + // the character that did not fit in ringbuf is in rx_char + ringbuf_put_n(&self->ringbuf, &self->rx_char, 1); + // keep receiving + (void) nrfx_uarte_rx(self->uarte, &self->rx_char, 1); + nrf_gpio_pin_write(self->rts_pin_number, false); + self->rx_paused = false; + } + NVIC_EnableIRQ(nrfx_get_irq_number(self->uarte->p_reg)); return rx_bytes; diff --git a/ports/nrf/common-hal/busio/UART.h b/ports/nrf/common-hal/busio/UART.h index a25116291..2eaf58440 100644 --- a/ports/nrf/common-hal/busio/UART.h +++ b/ports/nrf/common-hal/busio/UART.h @@ -42,10 +42,13 @@ typedef struct { uint32_t timeout_ms; ringbuf_t ringbuf; - uint8_t rx_char; // EasyDMA buf + uint8_t rx_char; // EasyDMA buf + bool rx_paused; // set by irq if no space in rbuf uint8_t tx_pin_number; uint8_t rx_pin_number; + uint8_t cts_pin_number; + uint8_t rts_pin_number; } busio_uart_obj_t; void uart_reset(void); diff --git a/ports/raspberrypi/Makefile b/ports/raspberrypi/Makefile index a604acb47..7ce5606f8 100644 --- a/ports/raspberrypi/Makefile +++ b/ports/raspberrypi/Makefile @@ -84,6 +84,7 @@ INC += -I. \ -isystem sdk/src/rp2_common/hardware_pio/include/ \ -isystem sdk/src/rp2_common/hardware_pll/include/ \ -isystem sdk/src/rp2_common/hardware_resets/include/ \ + -isystem sdk/src/rp2_common/hardware_rtc/include/ \ -isystem sdk/src/rp2_common/hardware_spi/include/ \ -isystem sdk/src/rp2_common/hardware_sync/include/ \ -isystem sdk/src/rp2_common/hardware_timer/include/ \ @@ -98,6 +99,7 @@ INC += -I. \ -isystem sdk/src/rp2_common/pico_platform/include/ \ -isystem sdk/src/rp2_common/pico_runtime/printf/include/ \ -isystem sdk/src/rp2_common/pico_bootrom/include/ \ + -isystem sdk/src/rp2_common/pico_unique_id/include/ \ -Isdk_config \ -I../../lib/tinyusb/src \ -I../../supervisor/shared/usb \ @@ -166,6 +168,7 @@ SRC_SDK := \ src/rp2_common/hardware_irq/irq.c \ src/rp2_common/hardware_pio/pio.c \ src/rp2_common/hardware_pll/pll.c \ + src/rp2_common/hardware_rtc/rtc.c \ src/rp2_common/hardware_spi/spi.c \ src/rp2_common/hardware_sync/sync.c \ src/rp2_common/hardware_timer/timer.c \ @@ -182,6 +185,7 @@ SRC_SDK := \ src/rp2_common/pico_printf/printf.c \ src/rp2_common/pico_runtime/runtime.c \ src/rp2_common/pico_stdio/stdio.c \ + src/rp2_common/pico_unique_id/unique_id.c \ SRC_SDK := $(addprefix sdk/, $(SRC_SDK)) @@ -192,6 +196,7 @@ SRC_C += \ bindings/rp2pio/__init__.c \ common-hal/rp2pio/StateMachine.c \ common-hal/rp2pio/__init__.c \ + audio_dma.c \ background.c \ peripherals/pins.c \ fatfs_port.c \ diff --git a/ports/raspberrypi/audio_dma.c b/ports/raspberrypi/audio_dma.c new file mode 100644 index 000000000..96317984d --- /dev/null +++ b/ports/raspberrypi/audio_dma.c @@ -0,0 +1,383 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "audio_dma.h" + +#include "shared-bindings/audiocore/RawSample.h" +#include "shared-bindings/audiocore/WaveFile.h" +#include "supervisor/background_callback.h" + +#include "py/mpstate.h" +#include "py/runtime.h" + +#include "src/rp2_common/hardware_irq/include/hardware/irq.h" + +#if CIRCUITPY_AUDIOPWMIO || CIRCUITPY_AUDIOBUSIO + +#define AUDIO_DMA_CHANNEL_COUNT NUM_DMA_CHANNELS + +void audio_dma_convert_signed(audio_dma_t* dma, uint8_t* buffer, uint32_t buffer_length, + uint8_t** output_buffer, uint32_t* output_buffer_length) { + if (dma->first_buffer_free) { + *output_buffer = dma->first_buffer; + } else { + *output_buffer = dma->second_buffer; + } + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wcast-align" + if (dma->signed_to_unsigned || + dma->unsigned_to_signed || + dma->sample_spacing > 1 || + (dma->sample_resolution != dma->output_resolution)) { + *output_buffer_length = buffer_length / dma->sample_spacing; + uint32_t out_i = 0; + if (dma->sample_resolution <= 8 && dma->output_resolution > 8) { + size_t shift = dma->output_resolution - dma->sample_resolution; + + for (uint32_t i = 0; i < buffer_length; i += dma->sample_spacing) { + if (dma->signed_to_unsigned) { + ((uint16_t*) *output_buffer)[out_i] = ((uint16_t) ((int8_t*) buffer)[i] + 0x80) << shift; + } else if (dma->unsigned_to_signed) { + ((int16_t*) *output_buffer)[out_i] = ((int16_t) ((uint8_t*) buffer)[i] - 0x80) << shift; + } else { + ((uint16_t*) *output_buffer)[out_i] = ((uint16_t) ((uint8_t*) buffer)[i]) << shift; + } + out_i += 1; + } + } else if (dma->sample_resolution <= 8 && dma->output_resolution <= 8) { + for (uint32_t i = 0; i < buffer_length; i += dma->sample_spacing) { + if (dma->signed_to_unsigned) { + ((uint8_t*) *output_buffer)[out_i] = ((int8_t*) buffer)[i] + 0x80; + } else if (dma->unsigned_to_signed) { + ((int8_t*) *output_buffer)[out_i] = ((uint8_t*) buffer)[i] - 0x80; + } else { + ((uint8_t*) *output_buffer)[out_i] = ((uint8_t*) buffer)[i]; + } + out_i += 1; + } + } else if (dma->sample_resolution > 8 && dma->output_resolution > 8) { + size_t shift = 16 - dma->output_resolution; + for (uint32_t i = 0; i < buffer_length / 2; i += dma->sample_spacing) { + if (dma->signed_to_unsigned) { + ((uint16_t*) *output_buffer)[out_i] = ((int16_t*) buffer)[i] + 0x8000; + } else if (dma->unsigned_to_signed) { + ((int16_t*) *output_buffer)[out_i] = ((uint16_t*) buffer)[i] - 0x8000; + } else { + ((uint16_t*) *output_buffer)[out_i] = ((uint16_t*) buffer)[i]; + } + if (dma->output_resolution < 16) { + if (dma->output_signed) { + ((int16_t*) *output_buffer)[out_i] = ((int16_t*) *output_buffer)[out_i] >> shift; + } else { + ((uint16_t*) *output_buffer)[out_i] = ((uint16_t*) *output_buffer)[out_i] >> shift; + } + } + out_i += 1; + } + } + } else { + *output_buffer = buffer; + *output_buffer_length = buffer_length; + } + #pragma GCC diagnostic pop + dma->first_buffer_free = !dma->first_buffer_free; +} + +void audio_dma_load_next_block(audio_dma_t* dma) { + uint8_t dma_channel = dma->channel[1]; + if (dma->first_channel_free) { + dma_channel = dma->channel[0]; + } + dma->first_channel_free = !dma->first_channel_free; + + uint8_t* output_buffer; + uint32_t output_buffer_length; + audioio_get_buffer_result_t get_buffer_result; + uint8_t* buffer; + uint32_t buffer_length; + get_buffer_result = audiosample_get_buffer(dma->sample, + dma->single_channel, dma->audio_channel, &buffer, &buffer_length); + + if (get_buffer_result == GET_BUFFER_ERROR) { + audio_dma_stop(dma); + return; + } + + audio_dma_convert_signed(dma, buffer, buffer_length, &output_buffer, &output_buffer_length); + + // If we don't have an output buffer, save the pointer to first_buffer for use in the single + // buffer special case. + if (dma->first_buffer == NULL) { + dma->first_buffer = output_buffer; + } + + dma_channel_set_trans_count(dma_channel, output_buffer_length / dma->output_size, false /* trigger */); + dma_channel_set_read_addr(dma_channel, output_buffer, false /* trigger */); + if (get_buffer_result == GET_BUFFER_DONE) { + if (dma->loop) { + audiosample_reset_buffer(dma->sample, dma->single_channel, dma->audio_channel); + } else { + // Set channel trigger to ourselves so we don't keep going. + dma_channel_hw_t* c = &dma_hw->ch[dma_channel]; + c->al1_ctrl = (c->al1_ctrl & ~DMA_CH0_CTRL_TRIG_CHAIN_TO_BITS) | (dma_channel << DMA_CH0_CTRL_TRIG_CHAIN_TO_LSB); + } + } +} + +// Playback should be shutdown before calling this. +audio_dma_result audio_dma_setup_playback(audio_dma_t* dma, + mp_obj_t sample, + bool loop, + bool single_channel, + uint8_t audio_channel, + bool output_signed, + uint8_t output_resolution, + uint32_t output_register_address, + uint8_t dma_trigger_source) { + // Use two DMA channels to because the DMA can't wrap to itself without the + // buffer being power of two aligned. + dma->channel[0] = dma_claim_unused_channel(false); + dma->channel[1] = dma_claim_unused_channel(false); + if (dma->channel[0] == NUM_DMA_CHANNELS || dma->channel[1] == NUM_DMA_CHANNELS) { + if (dma->channel[0] < NUM_DMA_CHANNELS) { + dma_channel_unclaim(dma->channel[0]); + } + return AUDIO_DMA_DMA_BUSY; + } + + dma->sample = sample; + dma->loop = loop; + dma->single_channel = single_channel; + dma->audio_channel = audio_channel; + dma->signed_to_unsigned = false; + dma->unsigned_to_signed = false; + dma->output_signed = output_signed; + dma->sample_spacing = 1; + dma->first_channel_free = true; + dma->output_resolution = output_resolution; + dma->sample_resolution = audiosample_bits_per_sample(sample); + audiosample_reset_buffer(sample, single_channel, audio_channel); + + bool single_buffer; + bool samples_signed; + uint32_t max_buffer_length; + audiosample_get_buffer_structure(sample, single_channel, &single_buffer, &samples_signed, + &max_buffer_length, &dma->sample_spacing); + + // Check to see if we have to scale the resolution up. + if (dma->sample_resolution <= 8 && dma->output_resolution > 8) { + max_buffer_length *= 2; + } + if (output_signed != samples_signed || + dma->sample_spacing > 1 || + (dma->sample_resolution != dma->output_resolution)) { + max_buffer_length /= dma->sample_spacing; + dma->first_buffer = (uint8_t*) m_realloc(dma->first_buffer, max_buffer_length); + if (dma->first_buffer == NULL) { + return AUDIO_DMA_MEMORY_ERROR; + } + + dma->first_buffer_free = true; + if (!single_buffer) { + dma->second_buffer = (uint8_t*) m_realloc(dma->second_buffer, max_buffer_length); + if (dma->second_buffer == NULL) { + return AUDIO_DMA_MEMORY_ERROR; + } + } + dma->signed_to_unsigned = !output_signed && samples_signed; + dma->unsigned_to_signed = output_signed && !samples_signed; + } + + if (output_resolution > 8) { + dma->output_size = 2; + } else { + dma->output_size = 1; + } + // Transfer both channels at once. + if (!single_channel && audiosample_channel_count(sample) == 2) { + dma->output_size *= 2; + } + + enum dma_channel_transfer_size dma_size = DMA_SIZE_8; + if (dma->output_size == 2) { + dma_size = DMA_SIZE_16; + } else if (dma->output_size == 4) { + dma_size = DMA_SIZE_32; + } + + for (size_t i = 0; i < 2; i++) { + dma_channel_config c = dma_channel_get_default_config(dma->channel[i]); + channel_config_set_transfer_data_size(&c, dma_size); + channel_config_set_dreq(&c, dma_trigger_source); + channel_config_set_read_increment(&c, true); + channel_config_set_write_increment(&c, false); + // Chain to the other channel by default. + channel_config_set_chain_to(&c, dma->channel[(i + 1) % 2]); + dma_channel_set_config(dma->channel[i], &c, false /* trigger */); + dma_channel_set_write_addr(dma->channel[i], (void*) output_register_address, false /* trigger */); + } + + // We keep the audio_dma_t for internal use and the sample as a root pointer because it + // contains the audiodma structure. + MP_STATE_PORT(playing_audio)[dma->channel[0]] = dma; + MP_STATE_PORT(playing_audio)[dma->channel[1]] = dma; + + // Load the first two blocks up front. + audio_dma_load_next_block(dma); + if (!single_buffer) { + audio_dma_load_next_block(dma); + } + + // Special case the DMA for a single buffer. It's commonly used for a single wave length of sound + // and may be short. Therefore, we use DMA chaining to loop quickly without involving interrupts. + // On the RP2040 we chain by having a second DMA writing to the config registers of the first. + // Read and write addresses change with DMA so we need to reset the read address back to the + // start of the sample. + if (single_buffer) { + dma_channel_config c = dma_channel_get_default_config(dma->channel[1]); + channel_config_set_transfer_data_size(&c, DMA_SIZE_32); + channel_config_set_dreq(&c, 0x3f); // dma as fast as possible + channel_config_set_read_increment(&c, false); + channel_config_set_write_increment(&c, false); + channel_config_set_chain_to(&c, dma->channel[1]); // Chain to ourselves so we stop. + dma_channel_configure(dma->channel[1], &c, + &dma_hw->ch[dma->channel[0]].al3_read_addr_trig, // write address + &dma->first_buffer, // read address + 1, // transaction count + false); // trigger + } else { + // Enable our DMA channels on DMA0 to the CPU. This will wake us up when + // we're WFI. + dma_hw->inte0 |= (1 << dma->channel[0]) | (1 << dma->channel[1]); + irq_set_mask_enabled(1 << DMA_IRQ_0, true); + } + + dma_channel_start(dma->channel[0]); + + return AUDIO_DMA_OK; +} + +void audio_dma_stop(audio_dma_t* dma) { + // Disable our interrupts. + dma_hw->inte0 &= ~((1 << dma->channel[0]) | (1 << dma->channel[1])); + irq_set_mask_enabled(1 << DMA_IRQ_0, false); + + // Run any remaining audio tasks because we remove ourselves from + // playing_audio. + RUN_BACKGROUND_TASKS; + + for (size_t i = 0; i < 2; i++) { + size_t channel = dma->channel[i]; + + if (dma_channel_is_busy(channel)) { + dma_channel_abort(channel); + } + dma_channel_unclaim(channel); + MP_STATE_PORT(playing_audio)[channel] = NULL; + dma->channel[i] = NUM_DMA_CHANNELS; + } + + // Hold onto our buffers. +} + +// To pause we simply stop the DMA. It is the responsibility of the output peripheral +// to hold the previous value. +void audio_dma_pause(audio_dma_t* dma) { + dma_hw->ch[dma->channel[0]].al1_ctrl &= ~DMA_CH0_CTRL_TRIG_EN_BITS; + dma_hw->ch[dma->channel[1]].al1_ctrl &= ~DMA_CH0_CTRL_TRIG_EN_BITS; +} + +void audio_dma_resume(audio_dma_t* dma) { + // Always re-enable the non-busy channel first so it's ready to continue when the busy channel + // finishes and chains to it. (An interrupt could make the time between enables long.) + size_t first = 0; + size_t second = 1; + if (dma_channel_is_busy(dma->channel[0])) { + first = 1; + second = 0; + } + dma_hw->ch[dma->channel[first]].al1_ctrl |= DMA_CH0_CTRL_TRIG_EN_BITS; + dma_hw->ch[dma->channel[second]].al1_ctrl |= DMA_CH0_CTRL_TRIG_EN_BITS; +} + +bool audio_dma_get_paused(audio_dma_t* dma) { + if (dma->channel[0] >= AUDIO_DMA_CHANNEL_COUNT) { + return false; + } + uint32_t control = dma_hw->ch[dma->channel[0]].ctrl_trig; + + return (control & DMA_CH0_CTRL_TRIG_EN_BITS) == 0; +} + +void audio_dma_init(audio_dma_t* dma) { + dma->first_buffer = NULL; + dma->second_buffer = NULL; +} + +void audio_dma_deinit(audio_dma_t* dma) { + m_free(dma->first_buffer); + dma->first_buffer = NULL; + + m_free(dma->second_buffer); + dma->second_buffer = NULL; +} + +bool audio_dma_get_playing(audio_dma_t* dma) { + if (dma->channel[0] == NUM_DMA_CHANNELS) { + return false; + } + if (!dma_channel_is_busy(dma->channel[0]) && + !dma_channel_is_busy(dma->channel[1])) { + audio_dma_stop(dma); + return false; + } + + return true; +} + +// WARN(tannewt): DO NOT print from here, or anything it calls. Printing calls +// background tasks such as this and causes a stack overflow. +STATIC void dma_callback_fun(void *arg) { + audio_dma_t* dma = arg; + if (dma == NULL) { + return; + } + + audio_dma_load_next_block(dma); +} + +void isr_dma_0(void) { + for (size_t i = 0; i < NUM_DMA_CHANNELS; i++) { + uint32_t mask = 1 << i; + if ((dma_hw->intr & mask) != 0 && MP_STATE_PORT(playing_audio)[i] != NULL) { + audio_dma_t* dma = MP_STATE_PORT(playing_audio)[i]; + background_callback_add(&dma->callback, dma_callback_fun, (void*)dma); + dma_hw->ints0 = mask; + } + } +} + +#endif diff --git a/ports/raspberrypi/audio_dma.h b/ports/raspberrypi/audio_dma.h new file mode 100644 index 000000000..1f739ff73 --- /dev/null +++ b/ports/raspberrypi/audio_dma.h @@ -0,0 +1,91 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_RASPBERRYPI_AUDIO_DMA_OUT_H +#define MICROPY_INCLUDED_RASPBERRYPI_AUDIO_DMA_OUT_H + +#include "py/obj.h" +#include "supervisor/background_callback.h" + +#include "src/rp2_common/hardware_dma/include/hardware/dma.h" + +typedef struct { + mp_obj_t sample; + uint8_t channel[2]; + uint8_t audio_channel; + uint8_t output_size; + uint8_t sample_spacing; + bool loop; + bool single_channel; + bool signed_to_unsigned; + bool unsigned_to_signed; + bool output_signed; + bool first_channel_free; + bool first_buffer_free; + uint8_t output_resolution; // in bits + uint8_t sample_resolution; // in bits + uint8_t* first_buffer; + uint8_t* second_buffer; + background_callback_t callback; +} audio_dma_t; + +typedef enum { + AUDIO_DMA_OK, + AUDIO_DMA_DMA_BUSY, + AUDIO_DMA_MEMORY_ERROR, +} audio_dma_result; + + +void audio_dma_init(audio_dma_t* dma); +void audio_dma_deinit(audio_dma_t* dma); +void audio_dma_reset(void); + +// This sets everything up but doesn't start the timer. +// Sample is the python object for the sample to play. +// loop is true if we should loop the sample. +// single_channel is true if we only output a single channel. When false, all channels will be +// output. +// audio_channel is the index of the channel to dma. single_channel must be false in this case. +// output_signed is true if the dma'd data should be signed. False and it will be unsigned. +// output_register_address is the address to copy data to. +// dma_trigger_source is the DMA trigger source which cause another copy +audio_dma_result audio_dma_setup_playback(audio_dma_t* dma, + mp_obj_t sample, + bool loop, + bool single_channel, + uint8_t audio_channel, + bool output_signed, + uint8_t output_resolution, + uint32_t output_register_address, + uint8_t dma_trigger_source); + +void audio_dma_stop(audio_dma_t* dma); +bool audio_dma_get_playing(audio_dma_t* dma); +void audio_dma_pause(audio_dma_t* dma); +void audio_dma_resume(audio_dma_t* dma); +bool audio_dma_get_paused(audio_dma_t* dma); + +#endif // MICROPY_INCLUDED_RASPBERRYPI_AUDIO_DMA_OUT_H diff --git a/ports/raspberrypi/background.c b/ports/raspberrypi/background.c index c85b83b41..52f2e4fb4 100644 --- a/ports/raspberrypi/background.c +++ b/ports/raspberrypi/background.c @@ -25,20 +25,11 @@ */ #include "background.h" -#include "supervisor/filesystem.h" -#include "supervisor/shared/tick.h" -#include "supervisor/usb.h" - #include "py/runtime.h" -#include "shared-module/network/__init__.h" -#include "supervisor/shared/stack.h" #include "supervisor/port.h" -#if CIRCUITPY_DISPLAYIO -#include "shared-module/displayio/__init__.h" -#endif - void port_start_background_task(void) {} void port_finish_background_task(void) {} -void port_background_task(void) {} +void port_background_task(void) { +} diff --git a/ports/raspberrypi/bindings/rp2pio/StateMachine.c b/ports/raspberrypi/bindings/rp2pio/StateMachine.c index 0f6f84a56..34633949e 100644 --- a/ports/raspberrypi/bindings/rp2pio/StateMachine.c +++ b/ports/raspberrypi/bindings/rp2pio/StateMachine.c @@ -189,7 +189,7 @@ STATIC mp_obj_t rp2pio_statemachine_make_new(const mp_obj_type_t *type, size_t n if (bufinfo.len % 2 != 0) { mp_raise_ValueError(translate("Program size invalid")); } - if (bufinfo.len > 32) { + if (bufinfo.len > 64) { mp_raise_ValueError(translate("Program too large")); } diff --git a/ports/raspberrypi/boards/raspberry_pi_pico/pins.c b/ports/raspberrypi/boards/raspberry_pi_pico/pins.c index 913676ad2..e1927bc80 100644 --- a/ports/raspberrypi/boards/raspberry_pi_pico/pins.c +++ b/ports/raspberrypi/boards/raspberry_pi_pico/pins.c @@ -24,6 +24,7 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_GP20), MP_ROM_PTR(&pin_GPIO20) }, { MP_ROM_QSTR(MP_QSTR_GP21), MP_ROM_PTR(&pin_GPIO21) }, { MP_ROM_QSTR(MP_QSTR_GP22), MP_ROM_PTR(&pin_GPIO22) }, + { MP_ROM_QSTR(MP_QSTR_SMPS_MODE), MP_ROM_PTR(&pin_GPIO23) }, { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO25) }, { MP_ROM_QSTR(MP_QSTR_GP25), MP_ROM_PTR(&pin_GPIO25) }, { MP_ROM_QSTR(MP_QSTR_GP26_A0), MP_ROM_PTR(&pin_GPIO26) }, @@ -35,5 +36,7 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_GP28_A2), MP_ROM_PTR(&pin_GPIO28) }, { MP_ROM_QSTR(MP_QSTR_GP28), MP_ROM_PTR(&pin_GPIO28) }, { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO28) }, + { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO29) }, + { MP_ROM_QSTR(MP_QSTR_VOLTAGE_MONITOR), MP_ROM_PTR(&pin_GPIO29) }, }; MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/raspberrypi/bs2_default_padded_checksummed.S b/ports/raspberrypi/bs2_default_padded_checksummed.S index d77f4867c..6b7074e3b 100644 --- a/ports/raspberrypi/bs2_default_padded_checksummed.S +++ b/ports/raspberrypi/bs2_default_padded_checksummed.S @@ -1,20 +1,23 @@ -// Padded and checksummed version of: /Users/graham/dev/mu/pico_sdk/cmake-build-debug-mu/src/rp2_common/boot_stage2/bs2_default.bin +// Padded and checksummed version of: /home/pi/pico/pico-examples/build/pico-sdk/src/rp2_common/boot_stage2/bs2_default.bin -.section .boot2, "a" +.cpu cortex-m0plus +.thumb -.byte 0x00, 0xb5, 0x2f, 0x4b, 0x21, 0x20, 0x58, 0x60, 0x98, 0x68, 0x02, 0x21, 0x88, 0x43, 0x98, 0x60 -.byte 0xd8, 0x60, 0x18, 0x61, 0x58, 0x61, 0x2b, 0x4b, 0x00, 0x21, 0x99, 0x60, 0x02, 0x21, 0x59, 0x61 -.byte 0x01, 0x21, 0xf0, 0x22, 0x99, 0x50, 0x28, 0x49, 0x19, 0x60, 0x01, 0x21, 0x99, 0x60, 0x35, 0x20 -.byte 0x00, 0xf0, 0x3e, 0xf8, 0x02, 0x22, 0x90, 0x42, 0x14, 0xd0, 0x06, 0x21, 0x19, 0x66, 0x00, 0xf0 -.byte 0x2e, 0xf8, 0x19, 0x6e, 0x01, 0x21, 0x19, 0x66, 0x00, 0x20, 0x18, 0x66, 0x1a, 0x66, 0x00, 0xf0 -.byte 0x26, 0xf8, 0x19, 0x6e, 0x19, 0x6e, 0x19, 0x6e, 0x05, 0x20, 0x00, 0xf0, 0x29, 0xf8, 0x01, 0x21 -.byte 0x08, 0x42, 0xf9, 0xd1, 0x00, 0x21, 0x99, 0x60, 0x18, 0x49, 0x19, 0x60, 0x00, 0x21, 0x59, 0x60 -.byte 0x17, 0x49, 0x18, 0x48, 0x01, 0x60, 0x01, 0x21, 0x99, 0x60, 0xeb, 0x21, 0x19, 0x66, 0xa0, 0x21 -.byte 0x19, 0x66, 0x00, 0xf0, 0x0c, 0xf8, 0x00, 0x21, 0x99, 0x60, 0x13, 0x49, 0x11, 0x48, 0x01, 0x60 -.byte 0x01, 0x21, 0x99, 0x60, 0x01, 0xbc, 0x00, 0x28, 0x00, 0xd1, 0x10, 0x48, 0x00, 0x47, 0x03, 0xb5 -.byte 0x99, 0x6a, 0x04, 0x20, 0x01, 0x42, 0xfb, 0xd0, 0x01, 0x20, 0x01, 0x42, 0xf8, 0xd1, 0x03, 0xbd -.byte 0x02, 0xb5, 0x18, 0x66, 0x18, 0x66, 0xff, 0xf7, 0xf2, 0xff, 0x18, 0x6e, 0x18, 0x6e, 0x02, 0xbd -.byte 0x00, 0x00, 0x02, 0x40, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x07, 0x00, 0x00, 0x03, 0x5f, 0x00 -.byte 0x21, 0x22, 0x00, 0x00, 0xf4, 0x00, 0x00, 0x18, 0x22, 0x20, 0x00, 0xa0, 0x01, 0x01, 0x00, 0x10 -.byte 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 -.byte 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x27, 0x2a, 0x60 +.section .boot2, "ax" + +.byte 0x00, 0xb5, 0x32, 0x4b, 0x21, 0x20, 0x58, 0x60, 0x98, 0x68, 0x02, 0x21, 0x88, 0x43, 0x98, 0x60 +.byte 0xd8, 0x60, 0x18, 0x61, 0x58, 0x61, 0x2e, 0x4b, 0x00, 0x21, 0x99, 0x60, 0x02, 0x21, 0x59, 0x61 +.byte 0x01, 0x21, 0xf0, 0x22, 0x99, 0x50, 0x2b, 0x49, 0x19, 0x60, 0x01, 0x21, 0x99, 0x60, 0x35, 0x20 +.byte 0x00, 0xf0, 0x44, 0xf8, 0x02, 0x22, 0x90, 0x42, 0x14, 0xd0, 0x06, 0x21, 0x19, 0x66, 0x00, 0xf0 +.byte 0x34, 0xf8, 0x19, 0x6e, 0x01, 0x21, 0x19, 0x66, 0x00, 0x20, 0x18, 0x66, 0x1a, 0x66, 0x00, 0xf0 +.byte 0x2c, 0xf8, 0x19, 0x6e, 0x19, 0x6e, 0x19, 0x6e, 0x05, 0x20, 0x00, 0xf0, 0x2f, 0xf8, 0x01, 0x21 +.byte 0x08, 0x42, 0xf9, 0xd1, 0x00, 0x21, 0x99, 0x60, 0x1b, 0x49, 0x19, 0x60, 0x00, 0x21, 0x59, 0x60 +.byte 0x1a, 0x49, 0x1b, 0x48, 0x01, 0x60, 0x01, 0x21, 0x99, 0x60, 0xeb, 0x21, 0x19, 0x66, 0xa0, 0x21 +.byte 0x19, 0x66, 0x00, 0xf0, 0x12, 0xf8, 0x00, 0x21, 0x99, 0x60, 0x16, 0x49, 0x14, 0x48, 0x01, 0x60 +.byte 0x01, 0x21, 0x99, 0x60, 0x01, 0xbc, 0x00, 0x28, 0x00, 0xd0, 0x00, 0x47, 0x12, 0x48, 0x13, 0x49 +.byte 0x08, 0x60, 0x03, 0xc8, 0x80, 0xf3, 0x08, 0x88, 0x08, 0x47, 0x03, 0xb5, 0x99, 0x6a, 0x04, 0x20 +.byte 0x01, 0x42, 0xfb, 0xd0, 0x01, 0x20, 0x01, 0x42, 0xf8, 0xd1, 0x03, 0xbd, 0x02, 0xb5, 0x18, 0x66 +.byte 0x18, 0x66, 0xff, 0xf7, 0xf2, 0xff, 0x18, 0x6e, 0x18, 0x6e, 0x02, 0xbd, 0x00, 0x00, 0x02, 0x40 +.byte 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x07, 0x00, 0x00, 0x03, 0x5f, 0x00, 0x21, 0x22, 0x00, 0x00 +.byte 0xf4, 0x00, 0x00, 0x18, 0x22, 0x20, 0x00, 0xa0, 0x00, 0x01, 0x00, 0x10, 0x08, 0xed, 0x00, 0xe0 +.byte 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x74, 0xb2, 0x4e, 0x7a diff --git a/ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c b/ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c new file mode 100644 index 000000000..57605a1fb --- /dev/null +++ b/ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c @@ -0,0 +1,235 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2019 Jeff Epler for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "common-hal/audiopwmio/PWMAudioOut.h" + +#include <stdint.h> +#include <string.h> + +#include "extmod/vfs_fat.h" +#include "py/gc.h" +#include "py/mperrno.h" +#include "py/runtime.h" +#include "shared-bindings/pwmio/PWMOut.h" +#include "shared-bindings/audiopwmio/PWMAudioOut.h" +#include "shared-bindings/microcontroller/__init__.h" +#include "shared-bindings/microcontroller/Pin.h" +#include "shared-bindings/microcontroller/Processor.h" +#include "supervisor/shared/tick.h" +#include "supervisor/shared/translate.h" + +#include "src/rp2040/hardware_structs/include/hardware/structs/dma.h" +#include "src/rp2_common/hardware_pwm/include/hardware/pwm.h" + +#define NUM_DMA_TIMERS 4 + +void audiopwmout_reset() { + for (size_t i = 0; i < NUM_DMA_TIMERS; i++) { + dma_hw->timer[i] = 0; + } +} + +// Caller validates that pins are free. +void common_hal_audiopwmio_pwmaudioout_construct(audiopwmio_pwmaudioout_obj_t* self, + const mcu_pin_obj_t* left_channel, const mcu_pin_obj_t* right_channel, uint16_t quiescent_value) { + if (left_channel != NULL && right_channel != NULL) { + if (pwm_gpio_to_slice_num(left_channel->number) != pwm_gpio_to_slice_num(right_channel->number)) { + mp_raise_ValueError(translate("Pins must share PWM slice")); + } + if (pwm_gpio_to_channel(left_channel->number) != 0) { + mp_raise_ValueError(translate("Stereo left must be on PWM channel A")); + } + if (pwm_gpio_to_channel(right_channel->number) != 1) { + mp_raise_ValueError(translate("Stereo right must be on PWM channel B")); + } + } + + // Typically pwmout doesn't let us change frequency with two objects on the + // same PWM slice. However, we have private access to it so we can do what + // we want. ;-) We mark ourselves variable only if we're a mono output to + // prevent other PWM use on the other channel. If stereo, we say fixed + // frequency so we can allocate with ourselves. + bool mono = right_channel == NULL; + + // We don't actually know our frequency yet so just pick one that shouldn't + // match anyone else. (We'll only know the frequency once we play something + // back.) + uint32_t frequency = 12500; + + // Make sure the PWMOut's are "deinited" by default. + self->left_pwm.pin = NULL; + self->right_pwm.pin = NULL; + + pwmout_result_t result = common_hal_pwmio_pwmout_construct(&self->left_pwm, + left_channel, 0, frequency, mono); + if (result == PWMOUT_OK && right_channel != NULL) { + result = common_hal_pwmio_pwmout_construct(&self->right_pwm, + right_channel, 0, frequency, false); + if (result != PWMOUT_OK) { + common_hal_pwmio_pwmout_deinit(&self->left_pwm); + } + } + if (result != PWMOUT_OK) { + mp_raise_RuntimeError(translate("All timers in use")); + } + + claim_pin(left_channel); + if (right_channel != NULL) { + claim_pin(right_channel); + } + + audio_dma_init(&self->dma); + + self->quiescent_value = quiescent_value; +} + +bool common_hal_audiopwmio_pwmaudioout_deinited(audiopwmio_pwmaudioout_obj_t* self) { + return common_hal_pwmio_pwmout_deinited(&self->left_pwm); +} + +void common_hal_audiopwmio_pwmaudioout_deinit(audiopwmio_pwmaudioout_obj_t* self) { + if (common_hal_audiopwmio_pwmaudioout_deinited(self)) { + return; + } + if (common_hal_audiopwmio_pwmaudioout_get_playing(self)) { + common_hal_audiopwmio_pwmaudioout_stop(self); + } + + // TODO: ramp the pwm down from quiescent value to 0 + common_hal_pwmio_pwmout_deinit(&self->left_pwm); + common_hal_pwmio_pwmout_deinit(&self->right_pwm); + + audio_dma_deinit(&self->dma); +} + +void common_hal_audiopwmio_pwmaudioout_play(audiopwmio_pwmaudioout_obj_t* self, mp_obj_t sample, bool loop) { + if (common_hal_audiopwmio_pwmaudioout_get_playing(self)) { + common_hal_audiopwmio_pwmaudioout_stop(self); + } + + // TODO: Share pacing timers based on frequency. + size_t pacing_timer = NUM_DMA_TIMERS; + for (size_t i = 0; i < NUM_DMA_TIMERS; i++) { + if (dma_hw->timer[i] == 0) { + pacing_timer = i; + } + break; + } + if (pacing_timer == NUM_DMA_TIMERS) { + mp_raise_RuntimeError(translate("No DMA pacing timer found")); + } + uint32_t tx_register = (uint32_t) &pwm_hw->slice[self->left_pwm.slice].cc; + if (common_hal_pwmio_pwmout_deinited(&self->right_pwm)) { + // Shift the destination if we are outputting to the second PWM channel. + tx_register += self->left_pwm.channel * sizeof(uint16_t); + } + + pwmio_pwmout_set_top(&self->left_pwm, 1023); + + audio_dma_result result = audio_dma_setup_playback( + &self->dma, + sample, + loop, + false, // single channel + 0, // audio channel + false, // output signed + 10, + (uint32_t) tx_register, // output register + 0x3b + pacing_timer); // data request line + + if (result == AUDIO_DMA_DMA_BUSY) { + // common_hal_audiobusio_i2sout_stop(self); + mp_raise_RuntimeError(translate("No DMA channel found")); + } else if (result == AUDIO_DMA_MEMORY_ERROR) { + // common_hal_audiobusio_i2sout_stop(self); + mp_raise_RuntimeError(translate("Unable to allocate buffers for signed conversion")); + } + + // OK! We got all of the resources we need and dma is ready. + self->pacing_timer = pacing_timer; + + // Playback with two independent clocks. One is the sample rate which + // determines when we push a new sample to the PWM slice. The second is the + // PWM frequency itself. + + // Determine the DMA divisor. The RP2040 has four pacing timers we can use + // to trigger the DMA. Each has a 16 bit fractional divisor system clock * X / Y where X and Y + // are 16-bit. + + uint32_t sample_rate = audiosample_sample_rate(sample); + uint32_t system_clock = common_hal_mcu_processor_get_frequency(); + uint32_t best_numerator = 0; + uint32_t best_denominator = 0; + uint32_t best_error = system_clock; + + for (uint32_t denominator = 0xffff; denominator > 0; denominator--) { + uint32_t numerator = (denominator * sample_rate) / system_clock; + uint32_t remainder = (denominator * sample_rate) % system_clock; + if (remainder > (system_clock / 2)) { + numerator += 1; + remainder = system_clock - remainder; + } + if (remainder < best_error) { + best_denominator = denominator; + best_numerator = numerator; + best_error = remainder; + // Stop early if we can't do better. + if (remainder == 0) { + break; + } + } + } + + dma_hw->timer[pacing_timer] = best_numerator << 16 | best_denominator; +} + +void common_hal_audiopwmio_pwmaudioout_stop(audiopwmio_pwmaudioout_obj_t* self) { + dma_hw->timer[self->pacing_timer] = 0; + self->pacing_timer = NUM_DMA_TIMERS; + + audio_dma_stop(&self->dma); +} + +bool common_hal_audiopwmio_pwmaudioout_get_playing(audiopwmio_pwmaudioout_obj_t* self) { + bool playing = audio_dma_get_playing(&self->dma); + if (!playing && self->pacing_timer < NUM_DMA_TIMERS) { + dma_hw->timer[self->pacing_timer] = 0; + self->pacing_timer = NUM_DMA_TIMERS; + } + return playing; +} + +void common_hal_audiopwmio_pwmaudioout_pause(audiopwmio_pwmaudioout_obj_t* self) { + audio_dma_pause(&self->dma); +} + +void common_hal_audiopwmio_pwmaudioout_resume(audiopwmio_pwmaudioout_obj_t* self) { + audio_dma_resume(&self->dma); +} + +bool common_hal_audiopwmio_pwmaudioout_get_paused(audiopwmio_pwmaudioout_obj_t* self) { + return audio_dma_get_paused(&self->dma); +} diff --git a/ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.h b/ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.h new file mode 100644 index 000000000..2b43b8354 --- /dev/null +++ b/ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.h @@ -0,0 +1,47 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2019 Jeff Epler for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_AUDIOPWMIO_PWMAUDIOOUT_H +#define MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_AUDIOPWMIO_PWMAUDIOOUT_H + +#include "common-hal/pwmio/PWMOut.h" + +#include "audio_dma.h" + +typedef struct { + mp_obj_base_t base; + pwmio_pwmout_obj_t left_pwm; + pwmio_pwmout_obj_t right_pwm; + audio_dma_t dma; + uint16_t quiescent_value; + uint8_t pacing_timer; +} audiopwmio_pwmaudioout_obj_t; + +void audiopwmout_reset(void); + +void audiopwmout_background(void); + +#endif // MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_AUDIOPWMIO_PWMAUDIOOUT_H diff --git a/ports/raspberrypi/common-hal/audiopwmio/__init__.c b/ports/raspberrypi/common-hal/audiopwmio/__init__.c new file mode 100644 index 000000000..e69de29bb --- /dev/null +++ b/ports/raspberrypi/common-hal/audiopwmio/__init__.c diff --git a/ports/raspberrypi/common-hal/busio/I2C.c b/ports/raspberrypi/common-hal/busio/I2C.c index fa49e375e..26a7f3807 100644 --- a/ports/raspberrypi/common-hal/busio/I2C.c +++ b/ports/raspberrypi/common-hal/busio/I2C.c @@ -90,7 +90,7 @@ void common_hal_busio_i2c_construct(busio_i2c_obj_t *self, if (!gpio_get(sda->number) || !gpio_get(scl->number)) { reset_pin_number(sda->number); reset_pin_number(scl->number); - mp_raise_RuntimeError(translate("SDA or SCL needs a pull up")); + mp_raise_RuntimeError(translate("No pull up found on SDA or SCL; check your wiring")); } #endif diff --git a/ports/raspberrypi/common-hal/microcontroller/Processor.c b/ports/raspberrypi/common-hal/microcontroller/Processor.c index 0ad3a51e2..e22286ca3 100644 --- a/ports/raspberrypi/common-hal/microcontroller/Processor.c +++ b/ports/raspberrypi/common-hal/microcontroller/Processor.c @@ -25,6 +25,7 @@ */ #include <math.h> +#include <string.h> #include "py/mphal.h" #include "common-hal/microcontroller/Processor.h" @@ -53,12 +54,9 @@ uint32_t common_hal_mcu_processor_get_frequency(void) { } void common_hal_mcu_processor_get_uid(uint8_t raw_id[]) { - // TODO: get the unique id from the flash. The chip itself doesn't have one. - // for (int i=0; i<4; i++) { - // for (int k=0; k<4; k++) { - // raw_id[4 * i + k] = (*(id_addresses[i]) >> k * 8) & 0xff; - // } - // } + pico_unique_board_id_t retrieved_id; + pico_get_unique_board_id(&retrieved_id); + memcpy(raw_id, retrieved_id.id, COMMON_HAL_MCU_PROCESSOR_UID_LENGTH); } mcu_reset_reason_t common_hal_mcu_processor_get_reset_reason(void) { diff --git a/ports/raspberrypi/common-hal/microcontroller/Processor.h b/ports/raspberrypi/common-hal/microcontroller/Processor.h index b7c86e850..afb43f9bd 100644 --- a/ports/raspberrypi/common-hal/microcontroller/Processor.h +++ b/ports/raspberrypi/common-hal/microcontroller/Processor.h @@ -27,7 +27,9 @@ #ifndef MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_MICROCONTROLLER_PROCESSOR_H #define MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_MICROCONTROLLER_PROCESSOR_H -#define COMMON_HAL_MCU_PROCESSOR_UID_LENGTH 16 +#include "src/rp2_common/pico_unique_id/include/pico/unique_id.h" + +#define COMMON_HAL_MCU_PROCESSOR_UID_LENGTH PICO_UNIQUE_BOARD_ID_SIZE_BYTES #include "py/obj.h" diff --git a/ports/raspberrypi/common-hal/microcontroller/__init__.c b/ports/raspberrypi/common-hal/microcontroller/__init__.c index 774e313bb..bfea8b2d9 100644 --- a/ports/raspberrypi/common-hal/microcontroller/__init__.c +++ b/ports/raspberrypi/common-hal/microcontroller/__init__.c @@ -35,12 +35,16 @@ #include "shared-bindings/microcontroller/__init__.h" #include "shared-bindings/microcontroller/Pin.h" #include "shared-bindings/microcontroller/Processor.h" +#include "supervisor/filesystem.h" +#include "supervisor/port.h" #include "supervisor/shared/safe_mode.h" #include "supervisor/shared/translate.h" #include "src/rp2040/hardware_structs/include/hardware/structs/sio.h" #include "src/rp2_common/hardware_sync/include/hardware/sync.h" +#include "hardware/watchdog.h" + void common_hal_mcu_delay_us(uint32_t delay) { mp_hal_delay_us(delay); } @@ -66,8 +70,11 @@ void common_hal_mcu_enable_interrupts(void) { asm volatile ("cpsie i" : : : "memory"); } +static bool next_reset_to_bootloader = false; + void common_hal_mcu_on_next_reset(mcu_runmode_t runmode) { if (runmode == RUNMODE_BOOTLOADER) { + next_reset_to_bootloader = true; } else { } if (runmode == RUNMODE_SAFE_MODE) { @@ -76,10 +83,17 @@ void common_hal_mcu_on_next_reset(mcu_runmode_t runmode) { } void common_hal_mcu_reset(void) { + filesystem_flush(); + if (next_reset_to_bootloader) { + reset_to_bootloader(); + } else { + reset_cpu(); + } } // The singleton microcontroller.Processor object, bound to microcontroller.cpu // It currently only has properties, and no state. +#if CIRCUITPY_PROCESSOR_COUNT > 1 static const mcu_processor_obj_t processor0 = { .base = { .type = &mcu_processor_type, @@ -92,7 +106,7 @@ static const mcu_processor_obj_t processor1 = { }, }; -const mp_rom_obj_tuple_t common_hal_mcu_processor_obj = { +const mp_rom_obj_tuple_t common_hal_multi_processor_obj = { {&mp_type_tuple}, CIRCUITPY_PROCESSOR_COUNT, { @@ -100,6 +114,13 @@ const mp_rom_obj_tuple_t common_hal_mcu_processor_obj = { MP_ROM_PTR(&processor1) } }; +#endif + +const mcu_processor_obj_t common_hal_mcu_processor_obj = { + .base = { + .type = &mcu_processor_type, + }, +}; #if CIRCUITPY_NVM && CIRCUITPY_INTERNAL_NVM_SIZE > 0 // The singleton nvm.ByteArray object. diff --git a/ports/raspberrypi/common-hal/neopixel_write/__init__.c b/ports/raspberrypi/common-hal/neopixel_write/__init__.c index 10462b5a3..561d438e2 100644 --- a/ports/raspberrypi/common-hal/neopixel_write/__init__.c +++ b/ports/raspberrypi/common-hal/neopixel_write/__init__.c @@ -29,6 +29,7 @@ #include "bindings/rp2pio/StateMachine.h" #include "common-hal/rp2pio/StateMachine.h" #include "shared-bindings/microcontroller/__init__.h" +#include "shared-bindings/digitalio/DigitalInOut.h" #include "supervisor/port.h" @@ -89,7 +90,11 @@ void common_hal_neopixel_write(const digitalio_digitalinout_obj_t* digitalinout, // Use a private deinit of the state machine that doesn't reset the pin. rp2pio_statemachine_deinit(&state_machine, true); + + // Reset the pin and release it from the PIO gpio_init(digitalinout->pin->number); + common_hal_digitalio_digitalinout_switch_to_output((digitalio_digitalinout_obj_t*)digitalinout, false, DRIVE_MODE_PUSH_PULL); + // Update the next start. next_start_raw_ticks = port_get_raw_ticks(NULL) + 1; } diff --git a/ports/raspberrypi/common-hal/pwmio/PWMOut.c b/ports/raspberrypi/common-hal/pwmio/PWMOut.c index 567ec5ef5..e861bab5a 100644 --- a/ports/raspberrypi/common-hal/pwmio/PWMOut.c +++ b/ports/raspberrypi/common-hal/pwmio/PWMOut.c @@ -39,7 +39,7 @@ #include "src/rp2_common/hardware_pwm/include/hardware/pwm.h" uint32_t target_slice_frequencies[NUM_PWM_SLICES]; -uint32_t slice_fixed_frequency; +uint32_t slice_variable_frequency; #define CHANNELS_PER_SLICE 2 static uint32_t channel_use; @@ -76,7 +76,7 @@ void pwmout_reset(void) { } pwm_set_enabled(slice, false); target_slice_frequencies[slice] = 0; - slice_fixed_frequency &= ~(1 << slice); + slice_variable_frequency &= ~(1 << slice); } } @@ -107,8 +107,8 @@ pwmout_result_t common_hal_pwmio_pwmout_construct(pwmio_pwmout_obj_t* self, if (variable_frequency) { return PWMOUT_ALL_TIMERS_ON_PIN_IN_USE; } - // If the other user wants to change frequency then we can't share either. - if ((slice_fixed_frequency & (1 << slice)) != 0) { + // If the other user wants a variable frequency then we can't share either. + if ((slice_variable_frequency & (1 << slice)) != 0) { return PWMOUT_ALL_TIMERS_ON_PIN_IN_USE; } // If we're both fixed frequency but we don't match target frequencies then we can't share. @@ -118,9 +118,10 @@ pwmout_result_t common_hal_pwmio_pwmout_construct(pwmio_pwmout_obj_t* self, } self->slice = slice; self->channel = channel; + channel_use |= channel_use_mask; - if (!variable_frequency) { - slice_fixed_frequency |= 1 << slice; + if (variable_frequency) { + slice_variable_frequency |= 1 << slice; } if (target_slice_frequencies[slice] != frequency) { @@ -153,7 +154,7 @@ void common_hal_pwmio_pwmout_deinit(pwmio_pwmout_obj_t* self) { uint32_t slice_mask = ((1 << CHANNELS_PER_SLICE) - 1) << (self->slice * CHANNELS_PER_SLICE + self->channel); if ((channel_use & slice_mask) == 0) { target_slice_frequencies[self->slice] = 0; - slice_fixed_frequency &= ~(1 << self->slice); + slice_variable_frequency &= ~(1 << self->slice); pwm_set_enabled(self->slice, false); } @@ -171,6 +172,13 @@ uint16_t common_hal_pwmio_pwmout_get_duty_cycle(pwmio_pwmout_obj_t* self) { return self->duty_cycle; } +void pwmio_pwmout_set_top(pwmio_pwmout_obj_t* self, uint32_t top) { + self->actual_frequency = common_hal_mcu_processor_get_frequency() / top; + self->top = top; + pwm_set_clkdiv_int_frac(self->slice, 1, 0); + pwm_set_wrap(self->slice, self->top - 1); +} + void common_hal_pwmio_pwmout_set_frequency(pwmio_pwmout_obj_t* self, uint32_t frequency) { if (frequency == 0 || frequency > (common_hal_mcu_processor_get_frequency() / 2)) { mp_raise_ValueError(translate("Invalid PWM frequency")); diff --git a/ports/raspberrypi/common-hal/pwmio/PWMOut.h b/ports/raspberrypi/common-hal/pwmio/PWMOut.h index 50f84777b..cbb0b707a 100644 --- a/ports/raspberrypi/common-hal/pwmio/PWMOut.h +++ b/ports/raspberrypi/common-hal/pwmio/PWMOut.h @@ -43,5 +43,7 @@ typedef struct { } pwmio_pwmout_obj_t; void pwmout_reset(void); +// Private API for AudioPWMOut. +void pwmio_pwmout_set_top(pwmio_pwmout_obj_t* self, uint32_t top); #endif // MICROPY_INCLUDED_ATMEL_SAMD_COMMON_HAL_PWMIO_PWMOUT_H diff --git a/ports/raspberrypi/common-hal/rp2pio/StateMachine.c b/ports/raspberrypi/common-hal/rp2pio/StateMachine.c index 6510410b0..90c48130e 100644 --- a/ports/raspberrypi/common-hal/rp2pio/StateMachine.c +++ b/ports/raspberrypi/common-hal/rp2pio/StateMachine.c @@ -546,15 +546,23 @@ static bool _transfer(rp2pio_statemachine_obj_t *self, size_t tx_remaining = out_len; while (rx_remaining || tx_remaining) { - if (tx_remaining && !pio_sm_is_tx_fifo_full(self->pio, self->state_machine)) { - *tx_destination = *data_out; - data_out++; - --tx_remaining; - } - if (rx_remaining && !pio_sm_is_rx_fifo_empty(self->pio, self->state_machine)) { - *data_in = (uint8_t) *rx_source; - data_in++; - --rx_remaining; + for (int i=0; i<32; i++) { + bool did_transfer = false; + if (tx_remaining && !pio_sm_is_tx_fifo_full(self->pio, self->state_machine)) { + *tx_destination = *data_out; + data_out++; + --tx_remaining; + did_transfer = true; + } + if (rx_remaining && !pio_sm_is_rx_fifo_empty(self->pio, self->state_machine)) { + *data_in = (uint8_t) *rx_source; + data_in++; + --rx_remaining; + did_transfer = true; + } + if (!did_transfer) { + break; + } } RUN_BACKGROUND_TASKS; if (mp_hal_is_interrupted()) { diff --git a/ports/raspberrypi/common-hal/rtc/RTC.c b/ports/raspberrypi/common-hal/rtc/RTC.c new file mode 100644 index 000000000..89c23fc19 --- /dev/null +++ b/ports/raspberrypi/common-hal/rtc/RTC.c @@ -0,0 +1,81 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright 2020 microDev + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ +#include "shared-bindings/rtc/RTC.h" + +#include <sys/time.h> + +#include "py/runtime.h" +#include "src/rp2_common/hardware_rtc/include/hardware/rtc.h" + +void common_hal_rtc_init(void) { + rtc_init(); +} + +void common_hal_rtc_get_time(timeutils_struct_time_t *tm) { + datetime_t t; + rtc_get_datetime(&t); + + tm->tm_year = t.year; + tm->tm_mon = t.month; + tm->tm_mday = t.day; + tm->tm_wday = t.dotw; + tm->tm_hour = t.hour; + tm->tm_min = t.min; + tm->tm_sec = t.sec; + + if (tm->tm_wday == 0) { + tm->tm_wday = 6; + } else { + tm->tm_wday-=1; + } +} + +void common_hal_rtc_set_time(timeutils_struct_time_t *tm) { + if (tm->tm_wday == 6) { + tm->tm_wday = 0; + } else { + tm->tm_wday+=1; + } + + datetime_t t = { + .year = tm->tm_year, + .month = tm->tm_mon, + .day = tm->tm_mday, + .dotw = tm->tm_wday, + .hour = tm->tm_hour, + .min = tm->tm_min, + .sec = tm->tm_sec + }; + rtc_set_datetime(&t); +} + +int common_hal_rtc_get_calibration(void) { + return 0; +} + +void common_hal_rtc_set_calibration(int calibration) { + mp_raise_NotImplementedError(translate("RTC calibration is not supported on this board")); +} diff --git a/ports/raspberrypi/common-hal/rtc/RTC.h b/ports/raspberrypi/common-hal/rtc/RTC.h new file mode 100644 index 000000000..426a4ec7a --- /dev/null +++ b/ports/raspberrypi/common-hal/rtc/RTC.h @@ -0,0 +1,32 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 microDev + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_RTC_RTC_H +#define MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_RTC_RTC_H + +extern void common_hal_rtc_init(void); + +#endif // MICROPY_INCLUDED_RASPBERRYPI_COMMON_HAL_RTC_RTC_H diff --git a/ports/raspberrypi/common-hal/rtc/__init__.c b/ports/raspberrypi/common-hal/rtc/__init__.c new file mode 100644 index 000000000..f5e6b6bdd --- /dev/null +++ b/ports/raspberrypi/common-hal/rtc/__init__.c @@ -0,0 +1 @@ +// No RTC module functions diff --git a/ports/raspberrypi/link.ld b/ports/raspberrypi/link.ld index d642fd680..b83299dee 100644 --- a/ports/raspberrypi/link.ld +++ b/ports/raspberrypi/link.ld @@ -59,12 +59,11 @@ SECTIONS */ .text : { - __reset_start = .; - KEEP (*(.reset)) - . = ALIGN(256); - __reset_end = .; - ASSERT(__reset_end - __reset_start == 256, "ERROR: reset section should only be 256 bytes"); + __logical_binary_start = .; KEEP (*(.vectors)) + KEEP (*(.binary_info_header)) + __binary_info_header_end = .; + KEEP (*(.reset)) /* TODO revisit this now memset/memcpy/float in ROM */ /* bit of a hack right now to exclude all floating point and time critical (e.g. memset, memcpy) code from * FLASH ... we will include any thing excluded here in .data below by default */ @@ -246,5 +245,7 @@ SECTIONS /* Check if data + heap + stack exceeds RAM limit */ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed") + + ASSERT( __binary_info_header_end - __logical_binary_start <= 256, "Binary info must be in first 256 bytes of the binary") /* todo assert on extra code */ } diff --git a/ports/raspberrypi/mpconfigport.h b/ports/raspberrypi/mpconfigport.h index 77d1ff080..e0d98579d 100644 --- a/ports/raspberrypi/mpconfigport.h +++ b/ports/raspberrypi/mpconfigport.h @@ -27,6 +27,8 @@ #ifndef __INCLUDED_MPCONFIGPORT_H #define __INCLUDED_MPCONFIGPORT_H +#include "src/rp2040/hardware_regs/include/hardware/platform_defs.h" + #define MICROPY_PY_SYS_PLATFORM "RP2040" #define CIRCUITPY_INTERNAL_NVM_SIZE 0 @@ -41,6 +43,7 @@ #include "py/circuitpy_mpconfig.h" #define MICROPY_PORT_ROOT_POINTERS \ + mp_obj_t playing_audio[NUM_DMA_CHANNELS]; \ CIRCUITPY_COMMON_ROOT_POINTERS; #endif // __INCLUDED_MPCONFIGPORT_H diff --git a/ports/raspberrypi/mpconfigport.mk b/ports/raspberrypi/mpconfigport.mk index 5c930d7cc..dac7231da 100644 --- a/ports/raspberrypi/mpconfigport.mk +++ b/ports/raspberrypi/mpconfigport.mk @@ -27,22 +27,26 @@ CIRCUITPY_FULL_BUILD = 1 CIRCUITPY_PWMIO = 1 # Things that need to be implemented. -CIRCUITPY_AUDIOBUSIO = 0 # Use PIO interally for I2S -CIRCUITPY_AUDIOMP3 = 0 CIRCUITPY_COUNTIO = 0 # Use PWM interally CIRCUITPY_FREQUENCYIO = 0 # Use PWM interally CIRCUITPY_I2CPERIPHERAL = 0 CIRCUITPY_NVM = 0 CIRCUITPY_PULSEIO = 0 # Use PIO interally CIRCUITPY_ROTARYIO = 0 # Use PIO interally -CIRCUITPY_RTC = 0 CIRCUITPY_WATCHDOG = 1 -# Things that are unsupported by the hardware. +# Audio via PWM CIRCUITPY_AUDIOIO = 0 +CIRCUITPY_AUDIOBUSIO ?= 0 # add this later +CIRCUITPY_AUDIOCORE ?= 1 +CIRCUITPY_AUDIOPWMIO ?= 1 + +# These libraries require Cortex M4+ for fancy math instructions. +CIRCUITPY_AUDIOMIXER ?= 0 +CIRCUITPY_AUDIOMP3 ?= 0 INTERNAL_LIBM = 1 -USB_SERIAL_NUMBER_LENGTH = 32 +USB_SERIAL_NUMBER_LENGTH = 16 USB_NUM_EP = 8 diff --git a/ports/raspberrypi/sdk b/ports/raspberrypi/sdk -Subproject 26653ea81e340cacee55025d110c3e014a252a8 +Subproject 55346c953012ef5b32f392fea3b42814db8df2a diff --git a/ports/raspberrypi/supervisor/port.c b/ports/raspberrypi/supervisor/port.c index b2f73c7b4..36d2e8275 100644 --- a/ports/raspberrypi/supervisor/port.c +++ b/ports/raspberrypi/supervisor/port.c @@ -32,6 +32,7 @@ #include "bindings/rp2pio/StateMachine.h" #include "genhdr/mpversion.h" +#include "shared-bindings/audiopwmio/PWMAudioOut.h" #include "shared-bindings/busio/I2C.h" #include "shared-bindings/busio/SPI.h" #include "shared-bindings/microcontroller/__init__.h" @@ -52,6 +53,8 @@ #include "tusb.h" +#include "pico/bootrom.h" +#include "hardware/watchdog.h" extern volatile bool mp_msc_enabled; @@ -94,25 +97,37 @@ void reset_port(void) { reset_spi(); #endif + #if CIRCUITPY_PWMIO + pwmout_reset(); + #endif + #if CIRCUITPY_RP2PIO reset_rp2pio_statemachine(); #endif - #if CIRCUITPY_PWMIO - pwmout_reset(); + #if CIRCUITPY_RTC + rtc_reset(); + #endif + + #if CIRCUITPY_AUDIOPWMIO + audiopwmout_reset(); #endif reset_all_pins(); } void reset_to_bootloader(void) { - // reset(); + reset_usb_boot(0, 0); while (true) {} } void reset_cpu(void) { - // reset(); - while (true) {} + watchdog_reboot(0, SRAM_END, 0); + watchdog_start_tick(12); + + while (true) { + __wfi(); + } } bool port_has_fixed_stack(void) { diff --git a/py/circuitpy_defns.mk b/py/circuitpy_defns.mk index 3ce7c0117..f907bf7ae 100644 --- a/py/circuitpy_defns.mk +++ b/py/circuitpy_defns.mk @@ -292,6 +292,9 @@ endif ifeq ($(CIRCUITPY_USB_MIDI),1) SRC_PATTERNS += usb_midi/% endif +ifeq ($(CIRCUITPY_USB_VENDOR),1) +SRC_PATTERNS += usb_vendor/% +endif ifeq ($(CIRCUITPY_USTACK),1) SRC_PATTERNS += ustack/% endif @@ -388,6 +391,7 @@ SRC_COMMON_HAL_ALL = \ socketpool/Socket.c \ ssl/__init__.c \ ssl/SSLContext.c \ + ssl/SSLSocket.c \ supervisor/Runtime.c \ supervisor/__init__.c \ watchdog/WatchDogMode.c \ diff --git a/py/circuitpy_mpconfig.mk b/py/circuitpy_mpconfig.mk index b8fe73eea..d9c7c0d33 100644 --- a/py/circuitpy_mpconfig.mk +++ b/py/circuitpy_mpconfig.mk @@ -288,6 +288,12 @@ CFLAGS += -DCIRCUITPY_USB_HID=$(CIRCUITPY_USB_HID) CIRCUITPY_USB_MIDI ?= 1 CFLAGS += -DCIRCUITPY_USB_MIDI=$(CIRCUITPY_USB_MIDI) +# Defaulting this to OFF initially because it has only been tested on a +# limited number of platforms, and the other platforms do not have this +# setting in their mpconfigport.mk and/or mpconfigboard.mk files yet. +CIRCUITPY_USB_VENDOR ?= 0 +CFLAGS += -DCIRCUITPY_USB_VENDOR=$(CIRCUITPY_USB_VENDOR) + CIRCUITPY_PEW ?= 0 CFLAGS += -DCIRCUITPY_PEW=$(CIRCUITPY_PEW) diff --git a/shared-bindings/_pew/__init__.c b/shared-bindings/_pew/__init__.c index 498beaf1c..912d267c4 100644 --- a/shared-bindings/_pew/__init__.c +++ b/shared-bindings/_pew/__init__.c @@ -29,6 +29,7 @@ #include "PewPew.h" #include "common-hal/_pew/PewPew.h" + STATIC mp_obj_t get_pressed(void) { pew_obj_t *pew = MP_STATE_VM(pew_singleton); if (!pew) { @@ -41,12 +42,19 @@ STATIC mp_obj_t get_pressed(void) { STATIC MP_DEFINE_CONST_FUN_OBJ_0(get_pressed_obj, get_pressed); +STATIC mp_obj_t get_ticks(void) { + return mp_obj_new_int(pew_get_ticks()); +} +STATIC MP_DEFINE_CONST_FUN_OBJ_0(get_ticks_obj, get_ticks); + + //| """LED matrix driver""" //| STATIC const mp_rom_map_elem_t pew_module_globals_table[] = { { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR__pew) }, { MP_OBJ_NEW_QSTR(MP_QSTR_PewPew), MP_ROM_PTR(&pewpew_type)}, { MP_OBJ_NEW_QSTR(MP_QSTR_get_pressed), MP_ROM_PTR(&get_pressed_obj)}, + { MP_OBJ_NEW_QSTR(MP_QSTR_get_ticks), MP_ROM_PTR(&get_ticks_obj)}, }; STATIC MP_DEFINE_CONST_DICT(pew_module_globals, pew_module_globals_table); diff --git a/shared-bindings/adafruit_bus_device/I2CDevice.c b/shared-bindings/adafruit_bus_device/I2CDevice.c index 15e8cc706..e6ec8c147 100644 --- a/shared-bindings/adafruit_bus_device/I2CDevice.c +++ b/shared-bindings/adafruit_bus_device/I2CDevice.c @@ -35,6 +35,7 @@ #include "lib/utils/buffer_helper.h" #include "lib/utils/context_manager_helpers.h" #include "py/runtime.h" +#include "py/smallint.h" #include "supervisor/shared/translate.h" @@ -132,15 +133,20 @@ STATIC mp_obj_t adafruit_bus_device_i2cdevice_readinto(size_t n_args, const mp_o mp_arg_parse_all(n_args - 1, pos_args + 1, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); mp_obj_t dest[8]; + uint8_t num_kws = 1; + mp_load_method(self->i2c, MP_QSTR_readfrom_into, dest); - dest[2] = mp_obj_new_int_from_ull(self->device_address); + dest[2] = MP_OBJ_NEW_SMALL_INT(self->device_address); dest[3] = args[ARG_buffer].u_obj; //dest[4] = mp_obj_new_str("start", 5); dest[4] = MP_OBJ_NEW_QSTR(MP_QSTR_start); - dest[5] = mp_obj_new_int(args[ARG_start].u_int); - dest[6] = MP_OBJ_NEW_QSTR(MP_QSTR_end); - dest[7] = mp_obj_new_int(args[ARG_end].u_int); - mp_call_method_n_kw(2, 2, dest); + dest[5] = MP_OBJ_NEW_SMALL_INT(args[ARG_start].u_int); + if (args[ARG_end].u_int != INT_MAX) { + dest[6] = MP_OBJ_NEW_QSTR(MP_QSTR_end); + dest[7] = MP_OBJ_NEW_SMALL_INT(args[ARG_end].u_int); + num_kws++; + } + mp_call_method_n_kw(2, num_kws, dest); return mp_const_none; } @@ -170,14 +176,20 @@ STATIC mp_obj_t adafruit_bus_device_i2cdevice_write(size_t n_args, const mp_obj_ mp_arg_parse_all(n_args - 1, pos_args + 1, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); mp_obj_t dest[8]; + uint8_t num_kws = 1; + mp_load_method(self->i2c, MP_QSTR_writeto, dest); - dest[2] = mp_obj_new_int_from_ull(self->device_address); + dest[2] = MP_OBJ_NEW_SMALL_INT(self->device_address); dest[3] = args[ARG_buffer].u_obj; dest[4] = MP_OBJ_NEW_QSTR(MP_QSTR_start); - dest[5] = mp_obj_new_int(args[ARG_start].u_int); - dest[6] = MP_OBJ_NEW_QSTR(MP_QSTR_end); - dest[7] = mp_obj_new_int(args[ARG_end].u_int); - mp_call_method_n_kw(2, 2, dest); + dest[5] = MP_OBJ_NEW_SMALL_INT(args[ARG_start].u_int); + if (args[ARG_end].u_int != INT_MAX) { + dest[6] = MP_OBJ_NEW_QSTR(MP_QSTR_end); + dest[7] = MP_OBJ_NEW_SMALL_INT(args[ARG_end].u_int); + num_kws++; + } + + mp_call_method_n_kw(2, num_kws, dest); return mp_const_none; } @@ -221,20 +233,29 @@ STATIC mp_obj_t adafruit_bus_device_i2cdevice_write_then_readinto(size_t n_args, mp_arg_parse_all(n_args - 1, pos_args + 1, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); mp_obj_t dest[13]; + uint8_t num_kws = 2; + uint8_t index = 2; + mp_load_method(self->i2c, MP_QSTR_writeto_then_readfrom, dest); - dest[2] = mp_obj_new_int_from_ull(self->device_address); - dest[3] = args[ARG_out_buffer].u_obj; - dest[4] = args[ARG_in_buffer].u_obj; - dest[5] = MP_OBJ_NEW_QSTR(MP_QSTR_out_start); - dest[6] = mp_obj_new_int(args[ARG_out_start].u_int); - dest[7] = MP_OBJ_NEW_QSTR(MP_QSTR_out_end); - dest[8] = mp_obj_new_int(args[ARG_out_end].u_int); - dest[9] = MP_OBJ_NEW_QSTR(MP_QSTR_in_start); - dest[10] = mp_obj_new_int(args[ARG_in_start].u_int); - dest[11] = MP_OBJ_NEW_QSTR(MP_QSTR_in_end); - dest[12] = mp_obj_new_int(args[ARG_in_end].u_int); - - mp_call_method_n_kw(3, 4, dest); + dest[index++] = MP_OBJ_NEW_SMALL_INT(self->device_address); + dest[index++] = args[ARG_out_buffer].u_obj; + dest[index++] = args[ARG_in_buffer].u_obj; + dest[index++] = MP_OBJ_NEW_QSTR(MP_QSTR_out_start); + dest[index++] = MP_OBJ_NEW_SMALL_INT(args[ARG_out_start].u_int); + if (args[ARG_out_end].u_int != INT_MAX) { + dest[index++] = MP_OBJ_NEW_QSTR(MP_QSTR_out_end); + dest[index++] = MP_OBJ_NEW_SMALL_INT(args[ARG_out_end].u_int); + num_kws++; + } + dest[index++] = MP_OBJ_NEW_QSTR(MP_QSTR_in_start); + dest[index++] = MP_OBJ_NEW_SMALL_INT(args[ARG_in_start].u_int); + if (args[ARG_in_end].u_int != INT_MAX) { + dest[index++] = MP_OBJ_NEW_QSTR(MP_QSTR_in_end); + dest[index++] = MP_OBJ_NEW_SMALL_INT(args[ARG_in_end].u_int); + num_kws++; + } + + mp_call_method_n_kw(3, num_kws, dest); return mp_const_none; } diff --git a/shared-bindings/adafruit_bus_device/SPIDevice.c b/shared-bindings/adafruit_bus_device/SPIDevice.c index e127e39b8..ec1f53c85 100644 --- a/shared-bindings/adafruit_bus_device/SPIDevice.c +++ b/shared-bindings/adafruit_bus_device/SPIDevice.c @@ -34,6 +34,7 @@ #include "lib/utils/buffer_helper.h" #include "lib/utils/context_manager_helpers.h" +#include "py/objproperty.h" #include "py/runtime.h" #include "supervisor/shared/translate.h" @@ -100,13 +101,22 @@ STATIC mp_obj_t adafruit_bus_device_spidevice_make_new(const mp_obj_type_t *type return (mp_obj_t)self; } +//| def __enter__(self) -> busio.SPI: +//| """Starts a SPI transaction by configuring the SPI and asserting chip select.""" +//| ... +//| STATIC mp_obj_t adafruit_bus_device_spidevice_obj___enter__(mp_obj_t self_in) { adafruit_bus_device_spidevice_obj_t *self = MP_OBJ_TO_PTR(self_in); - common_hal_adafruit_bus_device_spidevice_enter(self); - return self->spi; + return common_hal_adafruit_bus_device_spidevice_enter(self); } STATIC MP_DEFINE_CONST_FUN_OBJ_1(adafruit_bus_device_spidevice___enter___obj, adafruit_bus_device_spidevice_obj___enter__); + +//| def __exit__(self) -> None: +//| """Ends a SPI transaction by deasserting chip select. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... +//| STATIC mp_obj_t adafruit_bus_device_spidevice_obj___exit__(size_t n_args, const mp_obj_t *args) { common_hal_adafruit_bus_device_spidevice_exit(MP_OBJ_TO_PTR(args[0])); return mp_const_none; diff --git a/shared-bindings/adafruit_bus_device/SPIDevice.h b/shared-bindings/adafruit_bus_device/SPIDevice.h index 5596b157f..997e22a6b 100644 --- a/shared-bindings/adafruit_bus_device/SPIDevice.h +++ b/shared-bindings/adafruit_bus_device/SPIDevice.h @@ -44,7 +44,7 @@ extern const mp_obj_type_t adafruit_bus_device_spidevice_type; // Initializes the hardware peripheral. extern void common_hal_adafruit_bus_device_spidevice_construct(adafruit_bus_device_spidevice_obj_t *self, busio_spi_obj_t *spi, digitalio_digitalinout_obj_t *cs, uint32_t baudrate, uint8_t polarity, uint8_t phase, uint8_t extra_clocks); -extern void common_hal_adafruit_bus_device_spidevice_enter(adafruit_bus_device_spidevice_obj_t *self); +extern mp_obj_t common_hal_adafruit_bus_device_spidevice_enter(adafruit_bus_device_spidevice_obj_t *self); extern void common_hal_adafruit_bus_device_spidevice_exit(adafruit_bus_device_spidevice_obj_t *self); #endif // MICROPY_INCLUDED_SHARED_BINDINGS_BUSDEVICE_SPIDEVICE_H diff --git a/shared-bindings/microcontroller/Processor.c b/shared-bindings/microcontroller/Processor.c index 90cc02fe3..67001c831 100644 --- a/shared-bindings/microcontroller/Processor.c +++ b/shared-bindings/microcontroller/Processor.c @@ -41,7 +41,15 @@ //| //| import microcontroller //| print(microcontroller.cpu.frequency) -//| print(microcontroller.cpu.temperature)""" +//| print(microcontroller.cpu.temperature) +//| +//| Note that on chips with more than one cpu (such as the RP2040) +//| microcontroller.cpu will return the value for CPU 0. +//| To get values from other CPUs use microcontroller.cpus indexed by +//| the number of the desired cpu. i.e. +//| +//| print(microcontroller.cpus[0].temperature) +//| print(microcontroller.cpus[1].frequency)""" //| //| def __init__(self) -> None: diff --git a/shared-bindings/microcontroller/__init__.c b/shared-bindings/microcontroller/__init__.c index 035587c30..dba66fa4f 100644 --- a/shared-bindings/microcontroller/__init__.c +++ b/shared-bindings/microcontroller/__init__.c @@ -53,7 +53,13 @@ //| cpu: Processor //| """CPU information and control, such as ``cpu.temperature`` and ``cpu.frequency`` //| (clock frequency). -//| This object is the sole instance of `microcontroller.Processor`.""" +//| This object is an instance of `microcontroller.Processor`.""" +//| + +//| cpus: Processor +//| """CPU information and control, such as ``cpus[0].temperature`` and ``cpus[1].frequency`` +//| (clock frequency) on chips with more than 1 cpu. The index selects which cpu. +//| This object is an instance of `microcontroller.Processor`.""" //| //| def delay_us(delay: int) -> None: @@ -155,6 +161,9 @@ const mp_obj_module_t mcu_pin_module = { STATIC const mp_rom_map_elem_t mcu_module_globals_table[] = { { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_microcontroller) }, { MP_ROM_QSTR(MP_QSTR_cpu), MP_ROM_PTR(&common_hal_mcu_processor_obj) }, +#if CIRCUITPY_PROCESSOR_COUNT > 1 + { MP_ROM_QSTR(MP_QSTR_cpus), MP_ROM_PTR(&common_hal_multi_processor_obj) }, +#endif { MP_ROM_QSTR(MP_QSTR_delay_us), MP_ROM_PTR(&mcu_delay_us_obj) }, { MP_ROM_QSTR(MP_QSTR_disable_interrupts), MP_ROM_PTR(&mcu_disable_interrupts_obj) }, { MP_ROM_QSTR(MP_QSTR_enable_interrupts), MP_ROM_PTR(&mcu_enable_interrupts_obj) }, diff --git a/shared-bindings/microcontroller/__init__.h b/shared-bindings/microcontroller/__init__.h index 39d3e718b..733127d56 100644 --- a/shared-bindings/microcontroller/__init__.h +++ b/shared-bindings/microcontroller/__init__.h @@ -48,7 +48,8 @@ extern const mp_obj_dict_t mcu_pin_globals; #if CIRCUITPY_PROCESSOR_COUNT == 1 extern const mcu_processor_obj_t common_hal_mcu_processor_obj; #elif CIRCUITPY_PROCESSOR_COUNT > 1 -extern const mp_rom_obj_tuple_t common_hal_mcu_processor_obj; +extern const mcu_processor_obj_t common_hal_mcu_processor_obj; +extern const mp_rom_obj_tuple_t common_hal_multi_processor_obj; #else #error "Invalid processor count" #endif diff --git a/shared-bindings/rtc/RTC.h b/shared-bindings/rtc/RTC.h index 76510bd72..02bf54f50 100644 --- a/shared-bindings/rtc/RTC.h +++ b/shared-bindings/rtc/RTC.h @@ -30,6 +30,7 @@ #include <stdint.h> #include <stdbool.h> +#include "py/obj.h" #include "lib/timeutils/timeutils.h" extern void common_hal_rtc_get_time(timeutils_struct_time_t *tm); diff --git a/shared-bindings/sdcardio/SDCard.c b/shared-bindings/sdcardio/SDCard.c index 975f8b095..35d6c1497 100644 --- a/shared-bindings/sdcardio/SDCard.c +++ b/shared-bindings/sdcardio/SDCard.c @@ -55,6 +55,12 @@ //| Data transfers use the specified baurate (rounded down to one that is supported by //| the microcontroller) //| +//| .. important:: +//| If the same SPI bus is shared with other peripherals, it is important that +//| the SD card be initialized before accessing any other peripheral on the bus. +//| Failure to do so can prevent the SD card from being recognized until it is +//| powered off or re-inserted. +//| //| Example usage: //| //| .. code-block:: python diff --git a/shared-bindings/socketpool/Socket.c b/shared-bindings/socketpool/Socket.c index 007417340..da827798c 100644 --- a/shared-bindings/socketpool/Socket.c +++ b/shared-bindings/socketpool/Socket.c @@ -3,8 +3,8 @@ * * The MIT License (MIT) * - * SPDX-FileCopyrightText: Copyright (c) 2014 Damien P. George - * 2018 Nick Moore for Adafruit Industries + * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries + * Copyright (c) 2021 Lucian Copeland for Adafruit Industries * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal @@ -64,6 +64,25 @@ STATIC mp_obj_t socketpool_socket___exit__(size_t n_args, const mp_obj_t *args) } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(socketpool_socket___exit___obj, 4, 4, socketpool_socket___exit__); +//| def accept(self) -> Tuple[Socket, Tuple[str, int]]: +//| """Accept a connection on a listening socket of type SOCK_STREAM, +//| creating a new socket of type SOCK_STREAM. +//| Returns a tuple of (new_socket, remote_address)""" +//| +STATIC mp_obj_t socketpool_socket_accept(mp_obj_t self_in) { + socketpool_socket_obj_t *self = MP_OBJ_TO_PTR(self_in); + uint8_t ip[4]; + uint32_t port; + + socketpool_socket_obj_t * sock = common_hal_socketpool_socket_accept(self, ip, &port); + + mp_obj_t tuple_contents[2]; + tuple_contents[0] = MP_OBJ_FROM_PTR(sock); + tuple_contents[1] = netutils_format_inet_addr(ip, port, NETUTILS_BIG); + return mp_obj_new_tuple(2, tuple_contents); +} +STATIC MP_DEFINE_CONST_FUN_OBJ_1(socketpool_socket_accept_obj, socketpool_socket_accept); + //| def bind(self, address: Tuple[str, int]) -> None: //| """Bind a socket to an address //| @@ -79,8 +98,11 @@ STATIC mp_obj_t socketpool_socket_bind(mp_obj_t self_in, mp_obj_t addr_in) { size_t hostlen; const char* host = mp_obj_str_get_data(addr_items[0], &hostlen); mp_int_t port = mp_obj_get_int(addr_items[1]); + if (port < 0) { + mp_raise_ValueError(translate("port must be >= 0")); + } - bool ok = common_hal_socketpool_socket_bind(self, host, hostlen, port); + bool ok = common_hal_socketpool_socket_bind(self, host, hostlen, (uint32_t)port); if (!ok) { mp_raise_ValueError(translate("Error: Failure to bind")); } @@ -89,41 +111,6 @@ STATIC mp_obj_t socketpool_socket_bind(mp_obj_t self_in, mp_obj_t addr_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_bind_obj, socketpool_socket_bind); -//| def listen(self, backlog: int) -> None: -//| """Set socket to listen for incoming connections -//| -//| :param ~int backlog: length of backlog queue for waiting connetions""" -//| ... -//| -STATIC mp_obj_t socketpool_socket_listen(mp_obj_t self_in, mp_obj_t backlog_in) { - socketpool_socket_obj_t *self = MP_OBJ_TO_PTR(self_in); - - int backlog = mp_obj_get_int(backlog_in); - - common_hal_socketpool_socket_listen(self, backlog); - return mp_const_none; -} -STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_listen_obj, socketpool_socket_listen); - -//| def accept(self) -> Tuple[Socket, Tuple[str, int]]: -//| """Accept a connection on a listening socket of type SOCK_STREAM, -//| creating a new socket of type SOCK_STREAM. -//| Returns a tuple of (new_socket, remote_address)""" -//| -STATIC mp_obj_t socketpool_socket_accept(mp_obj_t self_in) { - socketpool_socket_obj_t *self = MP_OBJ_TO_PTR(self_in); - uint8_t ip[4]; - uint port; - - socketpool_socket_obj_t * sock = common_hal_socketpool_socket_accept(self, ip, &port); - - mp_obj_t tuple_contents[2]; - tuple_contents[0] = MP_OBJ_FROM_PTR(sock); - tuple_contents[1] = netutils_format_inet_addr(ip, port, NETUTILS_BIG); - return mp_obj_new_tuple(2, tuple_contents); -} -STATIC MP_DEFINE_CONST_FUN_OBJ_1(socketpool_socket_accept_obj, socketpool_socket_accept); - //| def close(self) -> None: //| """Closes this Socket and makes its resources available to its SocketPool.""" //| @@ -149,8 +136,11 @@ STATIC mp_obj_t socketpool_socket_connect(mp_obj_t self_in, mp_obj_t addr_in) { size_t hostlen; const char* host = mp_obj_str_get_data(addr_items[0], &hostlen); mp_int_t port = mp_obj_get_int(addr_items[1]); + if (port < 0) { + mp_raise_ValueError(translate("port must be >= 0")); + } - bool ok = common_hal_socketpool_socket_connect(self, host, hostlen, port); + bool ok = common_hal_socketpool_socket_connect(self, host, hostlen, (uint32_t)port); if (!ok) { mp_raise_OSError(0); } @@ -159,31 +149,47 @@ STATIC mp_obj_t socketpool_socket_connect(mp_obj_t self_in, mp_obj_t addr_in) { } STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_connect_obj, socketpool_socket_connect); -//| def send(self, bytes: ReadableBuffer) -> int: -//| """Send some bytes to the connected remote address. -//| Suits sockets of type SOCK_STREAM +//| def listen(self, backlog: int) -> None: +//| """Set socket to listen for incoming connections //| -//| :param ~bytes bytes: some bytes to send""" +//| :param ~int backlog: length of backlog queue for waiting connetions""" //| ... //| -STATIC mp_obj_t socketpool_socket_send(mp_obj_t self_in, mp_obj_t buf_in) { +STATIC mp_obj_t socketpool_socket_listen(mp_obj_t self_in, mp_obj_t backlog_in) { + socketpool_socket_obj_t *self = MP_OBJ_TO_PTR(self_in); + + int backlog = mp_obj_get_int(backlog_in); + + common_hal_socketpool_socket_listen(self, backlog); + return mp_const_none; +} +STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_listen_obj, socketpool_socket_listen); + +//| def recvfrom_into(self, buffer: WriteableBuffer) -> Tuple[int, Tuple[str, int]]: +//| """Reads some bytes from a remote address. +//| +//| Returns a tuple containing +//| * the number of bytes received into the given buffer +//| * a remote_address, which is a tuple of ip address and port number +//| +//| :param object buffer: buffer to read into""" +//| ... +//| +STATIC mp_obj_t socketpool_socket_recvfrom_into(mp_obj_t self_in, mp_obj_t data_in) { socketpool_socket_obj_t *self = MP_OBJ_TO_PTR(self_in); - if (common_hal_socketpool_socket_get_closed(self)) { - // Bad file number. - mp_raise_OSError(MP_EBADF); - } - if (!common_hal_socketpool_socket_get_connected(self)) { - mp_raise_BrokenPipeError(); - } mp_buffer_info_t bufinfo; - mp_get_buffer_raise(buf_in, &bufinfo, MP_BUFFER_READ); - mp_int_t ret = common_hal_socketpool_socket_send(self, bufinfo.buf, bufinfo.len); - if (ret == -1) { - mp_raise_BrokenPipeError(); - } - return mp_obj_new_int_from_uint(ret); + mp_get_buffer_raise(data_in, &bufinfo, MP_BUFFER_WRITE); + + byte ip[4]; + mp_uint_t port; + mp_int_t ret = common_hal_socketpool_socket_recvfrom_into(self, + (byte*)bufinfo.buf, bufinfo.len, ip, &port); + mp_obj_t tuple_contents[2]; + tuple_contents[0] = mp_obj_new_int_from_uint(ret); + tuple_contents[1] = netutils_format_inet_addr(ip, port, NETUTILS_BIG); + return mp_obj_new_tuple(2, tuple_contents); } -STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_send_obj, socketpool_socket_send); +STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_recvfrom_into_obj, socketpool_socket_recvfrom_into); //| def recv_into(self, buffer: WriteableBuffer, bufsize: int) -> int: //| """Reads some bytes from the connected remote address, writing @@ -199,7 +205,6 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_send_obj, socketpool_socket_s //| :param int bufsize: optionally, a maximum number of bytes to read.""" //| ... //| - STATIC mp_obj_t socketpool_socket_recv_into(size_t n_args, const mp_obj_t *args) { socketpool_socket_obj_t *self = MP_OBJ_TO_PTR(args[0]); if (common_hal_socketpool_socket_get_closed(self)) { @@ -232,6 +237,32 @@ STATIC mp_obj_t socketpool_socket_recv_into(size_t n_args, const mp_obj_t *args) } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(socketpool_socket_recv_into_obj, 2, 3, socketpool_socket_recv_into); +//| def send(self, bytes: ReadableBuffer) -> int: +//| """Send some bytes to the connected remote address. +//| Suits sockets of type SOCK_STREAM +//| +//| :param ~bytes bytes: some bytes to send""" +//| ... +//| +STATIC mp_obj_t socketpool_socket_send(mp_obj_t self_in, mp_obj_t buf_in) { + socketpool_socket_obj_t *self = MP_OBJ_TO_PTR(self_in); + if (common_hal_socketpool_socket_get_closed(self)) { + // Bad file number. + mp_raise_OSError(MP_EBADF); + } + if (!common_hal_socketpool_socket_get_connected(self)) { + mp_raise_BrokenPipeError(); + } + mp_buffer_info_t bufinfo; + mp_get_buffer_raise(buf_in, &bufinfo, MP_BUFFER_READ); + mp_int_t ret = common_hal_socketpool_socket_send(self, bufinfo.buf, bufinfo.len); + if (ret == -1) { + mp_raise_BrokenPipeError(); + } + return mp_obj_new_int_from_uint(ret); +} +STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_send_obj, socketpool_socket_send); + //| def sendto(self, bytes: ReadableBuffer, address: Tuple[str, int]) -> int: //| """Send some bytes to a specific address. //| Suits sockets of type SOCK_DGRAM @@ -240,7 +271,6 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(socketpool_socket_recv_into_obj, 2, 3 //| :param ~tuple address: tuple of (remote_address, remote_port)""" //| ... //| - STATIC mp_obj_t socketpool_socket_sendto(mp_obj_t self_in, mp_obj_t data_in, mp_obj_t addr_in) { socketpool_socket_obj_t *self = MP_OBJ_TO_PTR(self_in); @@ -254,8 +284,11 @@ STATIC mp_obj_t socketpool_socket_sendto(mp_obj_t self_in, mp_obj_t data_in, mp_ size_t hostlen; const char* host = mp_obj_str_get_data(addr_items[0], &hostlen); mp_int_t port = mp_obj_get_int(addr_items[1]); + if (port < 0) { + mp_raise_ValueError(translate("port must be >= 0")); + } - mp_int_t ret = common_hal_socketpool_socket_sendto(self, host, hostlen, port, bufinfo.buf, bufinfo.len); + mp_int_t ret = common_hal_socketpool_socket_sendto(self, host, hostlen, (uint32_t)port, bufinfo.buf, bufinfo.len); if (!ret) { mp_raise_OSError(0); } @@ -264,37 +297,28 @@ STATIC mp_obj_t socketpool_socket_sendto(mp_obj_t self_in, mp_obj_t data_in, mp_ } STATIC MP_DEFINE_CONST_FUN_OBJ_3(socketpool_socket_sendto_obj, socketpool_socket_sendto); -//| def recvfrom_into(self, buffer: WriteableBuffer) -> Tuple[int, Tuple[str, int]]: -//| """Reads some bytes from a remote address. -//| -//| Returns a tuple containing -//| * the number of bytes received into the given buffer -//| * a remote_address, which is a tuple of ip address and port number +//| def setblocking(self, flag: bool) -> Optional[int]: +//| """Set the blocking behaviour of this socket. //| -//| :param object buffer: buffer to read into""" +//| :param ~bool flag: False means non-blocking, True means block indefinitely.""" //| ... //| -STATIC mp_obj_t socketpool_socket_recvfrom_into(mp_obj_t self_in, mp_obj_t data_in) { +// method socket.setblocking(flag) +STATIC mp_obj_t socketpool_socket_setblocking(mp_obj_t self_in, mp_obj_t blocking) { socketpool_socket_obj_t *self = MP_OBJ_TO_PTR(self_in); - mp_buffer_info_t bufinfo; - mp_get_buffer_raise(data_in, &bufinfo, MP_BUFFER_WRITE); - - byte ip[4]; - mp_uint_t port; - mp_int_t ret = common_hal_socketpool_socket_recvfrom_into(self, - (byte*)bufinfo.buf, bufinfo.len, ip, &port); - mp_obj_t tuple_contents[2]; - tuple_contents[0] = mp_obj_new_int_from_uint(ret); - tuple_contents[1] = netutils_format_inet_addr(ip, port, NETUTILS_BIG); - return mp_obj_new_tuple(2, tuple_contents); + if (mp_obj_is_true(blocking)) { + common_hal_socketpool_socket_settimeout(self, -1); + } else { + common_hal_socketpool_socket_settimeout(self, 0); + } + return mp_const_none; } -STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_recvfrom_into_obj, socketpool_socket_recvfrom_into); +STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_setblocking_obj, socketpool_socket_setblocking); // //| def setsockopt(self, level: int, optname: int, value: int) -> None: // //| """Sets socket options""" // //| ... // //| - // STATIC mp_obj_t socketpool_socket_setsockopt(size_t n_args, const mp_obj_t *args) { // // mod_network_socket_obj_t *self = MP_OBJ_TO_PTR(args[0]); @@ -324,13 +348,13 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_recvfrom_into_obj, socketpool // } // STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(socketpool_socket_setsockopt_obj, 4, 4, socketpool_socket_setsockopt); + //| def settimeout(self, value: int) -> None: //| """Set the timeout value for this socket. //| //| :param ~int value: timeout in seconds. 0 means non-blocking. None means block indefinitely.""" //| ... //| - STATIC mp_obj_t socketpool_socket_settimeout(mp_obj_t self_in, mp_obj_t timeout_in) { socketpool_socket_obj_t *self = MP_OBJ_TO_PTR(self_in); mp_uint_t timeout_ms; @@ -348,24 +372,6 @@ STATIC mp_obj_t socketpool_socket_settimeout(mp_obj_t self_in, mp_obj_t timeout_ } STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_settimeout_obj, socketpool_socket_settimeout); -// //| def setblocking(self, flag: bool) -> Optional[int]: -// //| """Set the blocking behaviour of this socket. -// //| -// //| :param ~bool flag: False means non-blocking, True means block indefinitely.""" -// //| ... -// //| - -// // method socket.setblocking(flag) -// STATIC mp_obj_t socketpool_socket_setblocking(mp_obj_t self_in, mp_obj_t blocking) { -// // if (mp_obj_is_true(blocking)) { -// // return socket_settimeout(self_in, mp_const_none); -// // } else { -// // return socket_settimeout(self_in, MP_OBJ_NEW_SMALL_INT(0)); -// // } -// return mp_const_none; -// } -// STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_setblocking_obj, socketpool_socket_setblocking); - //| def __hash__(self) -> int: //| """Returns a hash for the Socket.""" //| ... @@ -373,7 +379,7 @@ STATIC MP_DEFINE_CONST_FUN_OBJ_2(socketpool_socket_settimeout_obj, socketpool_so STATIC mp_obj_t socketpool_socket_unary_op(mp_unary_op_t op, mp_obj_t self_in) { switch (op) { case MP_UNARY_OP_HASH: { - return MP_OBJ_NEW_SMALL_INT(common_hal_socketpool_socket_get_hash(MP_OBJ_TO_PTR(self_in))); + return mp_obj_id(self_in); } default: return MP_OBJ_NULL; // op not supported @@ -384,19 +390,19 @@ STATIC const mp_rom_map_elem_t socketpool_socket_locals_dict_table[] = { { MP_ROM_QSTR(MP_QSTR___enter__), MP_ROM_PTR(&default___enter___obj) }, { MP_ROM_QSTR(MP_QSTR___exit__), MP_ROM_PTR(&socketpool_socket___exit___obj) }, { MP_ROM_QSTR(MP_QSTR___del__), MP_ROM_PTR(&socketpool_socket_close_obj) }, - { MP_ROM_QSTR(MP_QSTR_close), MP_ROM_PTR(&socketpool_socket_close_obj) }, - { MP_ROM_QSTR(MP_QSTR_bind), MP_ROM_PTR(&socketpool_socket_bind_obj) }, - { MP_ROM_QSTR(MP_QSTR_listen), MP_ROM_PTR(&socketpool_socket_listen_obj) }, { MP_ROM_QSTR(MP_QSTR_accept), MP_ROM_PTR(&socketpool_socket_accept_obj) }, + { MP_ROM_QSTR(MP_QSTR_bind), MP_ROM_PTR(&socketpool_socket_bind_obj) }, + { MP_ROM_QSTR(MP_QSTR_close), MP_ROM_PTR(&socketpool_socket_close_obj) }, { MP_ROM_QSTR(MP_QSTR_connect), MP_ROM_PTR(&socketpool_socket_connect_obj) }, - { MP_ROM_QSTR(MP_QSTR_send), MP_ROM_PTR(&socketpool_socket_send_obj) }, - { MP_ROM_QSTR(MP_QSTR_sendto), MP_ROM_PTR(&socketpool_socket_sendto_obj) }, + { MP_ROM_QSTR(MP_QSTR_listen), MP_ROM_PTR(&socketpool_socket_listen_obj) }, { MP_ROM_QSTR(MP_QSTR_recvfrom_into), MP_ROM_PTR(&socketpool_socket_recvfrom_into_obj) }, { MP_ROM_QSTR(MP_QSTR_recv_into), MP_ROM_PTR(&socketpool_socket_recv_into_obj) }, + { MP_ROM_QSTR(MP_QSTR_send), MP_ROM_PTR(&socketpool_socket_send_obj) }, + { MP_ROM_QSTR(MP_QSTR_sendto), MP_ROM_PTR(&socketpool_socket_sendto_obj) }, + { MP_ROM_QSTR(MP_QSTR_setblocking), MP_ROM_PTR(&socketpool_socket_setblocking_obj) }, // { MP_ROM_QSTR(MP_QSTR_setsockopt), MP_ROM_PTR(&socketpool_socket_setsockopt_obj) }, { MP_ROM_QSTR(MP_QSTR_settimeout), MP_ROM_PTR(&socketpool_socket_settimeout_obj) }, - // { MP_ROM_QSTR(MP_QSTR_setblocking), MP_ROM_PTR(&socketpool_socket_setblocking_obj) }, }; STATIC MP_DEFINE_CONST_DICT(socketpool_socket_locals_dict, socketpool_socket_locals_dict_table); diff --git a/shared-bindings/socketpool/Socket.h b/shared-bindings/socketpool/Socket.h index b5dceb50f..27173c8b3 100644 --- a/shared-bindings/socketpool/Socket.h +++ b/shared-bindings/socketpool/Socket.h @@ -31,22 +31,20 @@ extern const mp_obj_type_t socketpool_socket_type; -void common_hal_socketpool_socket_settimeout(socketpool_socket_obj_t* self, mp_uint_t timeout_ms); - -bool common_hal_socketpool_socket_bind(socketpool_socket_obj_t* self, const char* host, size_t hostlen, uint8_t port); -bool common_hal_socketpool_socket_listen(socketpool_socket_obj_t* self, int backlog); -socketpool_socket_obj_t * common_hal_socketpool_socket_accept(socketpool_socket_obj_t* self, uint8_t* ip, uint *port); - -bool common_hal_socketpool_socket_connect(socketpool_socket_obj_t* self, const char* host, size_t hostlen, mp_int_t port); -mp_uint_t common_hal_socketpool_socket_send(socketpool_socket_obj_t* self, const uint8_t* buf, mp_uint_t len); -mp_uint_t common_hal_socketpool_socket_recv_into(socketpool_socket_obj_t* self, const uint8_t* buf, mp_uint_t len); -mp_uint_t common_hal_socketpool_socket_sendto(socketpool_socket_obj_t* self, - const char* host, size_t hostlen, uint8_t port, const uint8_t* buf, mp_uint_t len); -mp_uint_t common_hal_socketpool_socket_recvfrom_into(socketpool_socket_obj_t* self, - uint8_t* buf, mp_uint_t len, uint8_t* ip, uint *port); +socketpool_socket_obj_t * common_hal_socketpool_socket_accept(socketpool_socket_obj_t* self, uint8_t* ip, uint32_t *port); +bool common_hal_socketpool_socket_bind(socketpool_socket_obj_t* self, const char* host, size_t hostlen, uint32_t port); void common_hal_socketpool_socket_close(socketpool_socket_obj_t* self); +bool common_hal_socketpool_socket_connect(socketpool_socket_obj_t* self, const char* host, size_t hostlen, uint32_t port); bool common_hal_socketpool_socket_get_closed(socketpool_socket_obj_t* self); bool common_hal_socketpool_socket_get_connected(socketpool_socket_obj_t* self); -mp_uint_t common_hal_socketpool_socket_get_hash(socketpool_socket_obj_t* self); +mp_uint_t common_hal_socketpool_socket_get_timeout(socketpool_socket_obj_t* self); +bool common_hal_socketpool_socket_listen(socketpool_socket_obj_t* self, int backlog); +mp_uint_t common_hal_socketpool_socket_recvfrom_into(socketpool_socket_obj_t* self, + uint8_t* buf, uint32_t len, uint8_t* ip, uint32_t *port); +mp_uint_t common_hal_socketpool_socket_recv_into(socketpool_socket_obj_t* self, const uint8_t* buf, uint32_t len); +mp_uint_t common_hal_socketpool_socket_send(socketpool_socket_obj_t* self, const uint8_t* buf, uint32_t len); +mp_uint_t common_hal_socketpool_socket_sendto(socketpool_socket_obj_t* self, + const char* host, size_t hostlen, uint32_t port, const uint8_t* buf, uint32_t len); +void common_hal_socketpool_socket_settimeout(socketpool_socket_obj_t* self, uint32_t timeout_ms); #endif // MICROPY_INCLUDED_SHARED_BINDINGS_SOCKETPOOL_SOCKET_H diff --git a/shared-bindings/socketpool/SocketPool.c b/shared-bindings/socketpool/SocketPool.c index 8f4069faa..6ff6d5f98 100644 --- a/shared-bindings/socketpool/SocketPool.c +++ b/shared-bindings/socketpool/SocketPool.c @@ -3,8 +3,7 @@ * * The MIT License (MIT) * - * SPDX-FileCopyrightText: Copyright (c) 2014 Damien P. George - * 2018 Nick Moore for Adafruit Industries + * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal diff --git a/shared-bindings/ssl/SSLContext.c b/shared-bindings/ssl/SSLContext.c index 9d4df7261..44e9e6bbf 100644 --- a/shared-bindings/ssl/SSLContext.c +++ b/shared-bindings/ssl/SSLContext.c @@ -51,7 +51,7 @@ STATIC mp_obj_t ssl_sslcontext_make_new(const mp_obj_type_t *type, size_t n_args return MP_OBJ_FROM_PTR(s); } -//| def wrap_socket(sock: socketpool.Socket, *, server_side: bool = False, server_hostname: Optional[str] = None) -> socketpool.Socket: +//| def wrap_socket(sock: socketpool.Socket, *, server_side: bool = False, server_hostname: Optional[str] = None) -> ssl.SSLSocket: //| """Wraps the socket into a socket-compatible class that handles SSL negotiation. //| The socket must be of type SOCK_STREAM.""" //| ... diff --git a/shared-bindings/ssl/SSLContext.h b/shared-bindings/ssl/SSLContext.h index f7f985af7..ad4d7e6a8 100644 --- a/shared-bindings/ssl/SSLContext.h +++ b/shared-bindings/ssl/SSLContext.h @@ -30,12 +30,13 @@ #include "common-hal/ssl/SSLContext.h" #include "shared-bindings/socketpool/Socket.h" +#include "shared-bindings/ssl/SSLSocket.h" extern const mp_obj_type_t ssl_sslcontext_type; void common_hal_ssl_sslcontext_construct(ssl_sslcontext_obj_t* self); -socketpool_socket_obj_t* common_hal_ssl_sslcontext_wrap_socket(ssl_sslcontext_obj_t* self, +ssl_sslsocket_obj_t* common_hal_ssl_sslcontext_wrap_socket(ssl_sslcontext_obj_t* self, socketpool_socket_obj_t* sock, bool server_side, const char* server_hostname); #endif // MICROPY_INCLUDED_SHARED_BINDINGS_SSL_SSLCONTEXT_H diff --git a/shared-bindings/ssl/SSLSocket.c b/shared-bindings/ssl/SSLSocket.c new file mode 100644 index 000000000..0daa930ef --- /dev/null +++ b/shared-bindings/ssl/SSLSocket.c @@ -0,0 +1,326 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2021 Lucian Copeland for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "shared-bindings/ssl/SSLSocket.h" + +#include <stdio.h> +#include <string.h> + +#include "lib/utils/context_manager_helpers.h" +#include "py/objtuple.h" +#include "py/objlist.h" +#include "py/runtime.h" +#include "py/mperrno.h" + +#include "lib/netutils/netutils.h" + +//| class SSLSocket: +//| """Implements TLS security on a subset of `socketpool.Socket` functions. Cannot be created +//| directly. Instead, call `wrap_socket` on an existing socket object. +//| +//| Provides a subset of CPython's `ssl.SSLSocket` API. It only implements the versions of +//| recv that do not allocate bytes objects.""" +//| + +//| def __enter__(self) -> SSLSocket: +//| """No-op used by Context Managers.""" +//| ... +//| +// Provided by context manager helper. + +//| def __exit__(self) -> None: +//| """Automatically closes the Socket when exiting a context. See +//| :ref:`lifetime-and-contextmanagers` for more info.""" +//| ... +//| +STATIC mp_obj_t ssl_sslsocket___exit__(size_t n_args, const mp_obj_t *args) { + (void)n_args; + common_hal_ssl_sslsocket_close(args[0]); + return mp_const_none; +} +STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(ssl_sslsocket___exit___obj, 4, 4, ssl_sslsocket___exit__); + +//| def accept(self) -> Tuple[SSLSocket, Tuple[str, int]]: +//| """Accept a connection on a listening socket of type SOCK_STREAM, +//| creating a new socket of type SOCK_STREAM. +//| Returns a tuple of (new_socket, remote_address)""" +//| +STATIC mp_obj_t ssl_sslsocket_accept(mp_obj_t self_in) { + ssl_sslsocket_obj_t *self = MP_OBJ_TO_PTR(self_in); + uint8_t ip[4]; + uint32_t port; + + ssl_sslsocket_obj_t * sslsock = common_hal_ssl_sslsocket_accept(self, ip, &port); + + mp_obj_t tuple_contents[2]; + tuple_contents[0] = MP_OBJ_FROM_PTR(sslsock); + tuple_contents[1] = netutils_format_inet_addr(ip, port, NETUTILS_BIG); + return mp_obj_new_tuple(2, tuple_contents); +} +STATIC MP_DEFINE_CONST_FUN_OBJ_1(ssl_sslsocket_accept_obj, ssl_sslsocket_accept); + +//| def bind(self, address: Tuple[str, int]) -> None: +//| """Bind a socket to an address +//| +//| :param ~tuple address: tuple of (remote_address, remote_port)""" +//| ... +//| +STATIC mp_obj_t ssl_sslsocket_bind(mp_obj_t self_in, mp_obj_t addr_in) { + ssl_sslsocket_obj_t *self = MP_OBJ_TO_PTR(self_in); + + mp_obj_t *addr_items; + mp_obj_get_array_fixed_n(addr_in, 2, &addr_items); + + size_t hostlen; + const char* host = mp_obj_str_get_data(addr_items[0], &hostlen); + mp_int_t port = mp_obj_get_int(addr_items[1]); + if (port < 0) { + mp_raise_ValueError(translate("port must be >= 0")); + } + + bool ok = common_hal_ssl_sslsocket_bind(self, host, hostlen, (uint32_t)port); + if (!ok) { + mp_raise_ValueError(translate("Error: Failure to bind")); + } + + return mp_const_none; +} +STATIC MP_DEFINE_CONST_FUN_OBJ_2(ssl_sslsocket_bind_obj, ssl_sslsocket_bind); + +//| def close(self) -> None: +//| """Closes this Socket""" +//| +STATIC mp_obj_t ssl_sslsocket_close(mp_obj_t self_in) { + ssl_sslsocket_obj_t *self = MP_OBJ_TO_PTR(self_in); + common_hal_ssl_sslsocket_close(self); + return mp_const_none; +} +STATIC MP_DEFINE_CONST_FUN_OBJ_1(ssl_sslsocket_close_obj, ssl_sslsocket_close); + +//| def connect(self, address: Tuple[str, int]) -> None: +//| """Connect a socket to a remote address +//| +//| :param ~tuple address: tuple of (remote_address, remote_port)""" +//| ... +//| +STATIC mp_obj_t ssl_sslsocket_connect(mp_obj_t self_in, mp_obj_t addr_in) { + ssl_sslsocket_obj_t *self = MP_OBJ_TO_PTR(self_in); + + mp_obj_t *addr_items; + mp_obj_get_array_fixed_n(addr_in, 2, &addr_items); + + size_t hostlen; + const char* host = mp_obj_str_get_data(addr_items[0], &hostlen); + mp_int_t port = mp_obj_get_int(addr_items[1]); + if (port < 0) { + mp_raise_ValueError(translate("port must be >= 0")); + } + + bool ok = common_hal_ssl_sslsocket_connect(self, host, hostlen, (uint32_t)port); + if (!ok) { + mp_raise_OSError(0); + } + + return mp_const_none; +} +STATIC MP_DEFINE_CONST_FUN_OBJ_2(ssl_sslsocket_connect_obj, ssl_sslsocket_connect); + +//| def listen(self, backlog: int) -> None: +//| """Set socket to listen for incoming connections +//| +//| :param ~int backlog: length of backlog queue for waiting connetions""" +//| ... +//| +STATIC mp_obj_t ssl_sslsocket_listen(mp_obj_t self_in, mp_obj_t backlog_in) { + ssl_sslsocket_obj_t *self = MP_OBJ_TO_PTR(self_in); + + int backlog = mp_obj_get_int(backlog_in); + + common_hal_ssl_sslsocket_listen(self, backlog); + return mp_const_none; +} +STATIC MP_DEFINE_CONST_FUN_OBJ_2(ssl_sslsocket_listen_obj, ssl_sslsocket_listen); + +//| def recv_into(self, buffer: WriteableBuffer, bufsize: int) -> int: +//| """Reads some bytes from the connected remote address, writing +//| into the provided buffer. If bufsize <= len(buffer) is given, +//| a maximum of bufsize bytes will be read into the buffer. If no +//| valid value is given for bufsize, the default is the length of +//| the given buffer. +//| +//| Suits sockets of type SOCK_STREAM +//| Returns an int of number of bytes read. +//| +//| :param bytearray buffer: buffer to receive into +//| :param int bufsize: optionally, a maximum number of bytes to read.""" +//| ... +//| +STATIC mp_obj_t ssl_sslsocket_recv_into(size_t n_args, const mp_obj_t *args) { + ssl_sslsocket_obj_t *self = MP_OBJ_TO_PTR(args[0]); + if (common_hal_ssl_sslsocket_get_closed(self)) { + // Bad file number. + mp_raise_OSError(MP_EBADF); + } + // if (!common_hal_ssl_sslsocket_get_connected(self)) { + // // not connected + // mp_raise_OSError(MP_ENOTCONN); + // } + mp_buffer_info_t bufinfo; + mp_get_buffer_raise(args[1], &bufinfo, MP_BUFFER_WRITE); + mp_int_t len = bufinfo.len; + if (n_args == 3) { + mp_int_t given_len = mp_obj_get_int(args[2]); + if (given_len > len) { + mp_raise_ValueError(translate("buffer too small for requested bytes")); + } + if (given_len > 0 && given_len < len) { + len = given_len; + } + } + + if (len == 0) { + return MP_OBJ_NEW_SMALL_INT(0); + } + + mp_int_t ret = common_hal_ssl_sslsocket_recv_into(self, (byte*)bufinfo.buf, len); + return mp_obj_new_int_from_uint(ret); +} +STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(ssl_sslsocket_recv_into_obj, 2, 3, ssl_sslsocket_recv_into); + +//| def send(self, bytes: ReadableBuffer) -> int: +//| """Send some bytes to the connected remote address. +//| Suits sockets of type SOCK_STREAM +//| +//| :param ~bytes bytes: some bytes to send""" +//| ... +//| +STATIC mp_obj_t ssl_sslsocket_send(mp_obj_t self_in, mp_obj_t buf_in) { + ssl_sslsocket_obj_t *self = MP_OBJ_TO_PTR(self_in); + if (common_hal_ssl_sslsocket_get_closed(self)) { + // Bad file number. + mp_raise_OSError(MP_EBADF); + } + if (!common_hal_ssl_sslsocket_get_connected(self)) { + mp_raise_BrokenPipeError(); + } + mp_buffer_info_t bufinfo; + mp_get_buffer_raise(buf_in, &bufinfo, MP_BUFFER_READ); + mp_int_t ret = common_hal_ssl_sslsocket_send(self, bufinfo.buf, bufinfo.len); + if (ret == -1) { + mp_raise_BrokenPipeError(); + } + return mp_obj_new_int_from_uint(ret); +} +STATIC MP_DEFINE_CONST_FUN_OBJ_2(ssl_sslsocket_send_obj, ssl_sslsocket_send); + +// //| def setsockopt(self, level: int, optname: int, value: int) -> None: +// //| """Sets socket options""" +// //| ... +// //| +// STATIC mp_obj_t ssl_sslsocket_setsockopt(size_t n_args, const mp_obj_t *args) { +// } +// STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(ssl_sslsocket_setsockopt_obj, 4, 4, ssl_sslsocket_setsockopt); + +//| def settimeout(self, value: int) -> None: +//| """Set the timeout value for this socket. +//| +//| :param ~int value: timeout in seconds. 0 means non-blocking. None means block indefinitely.""" +//| ... +//| +STATIC mp_obj_t ssl_sslsocket_settimeout(mp_obj_t self_in, mp_obj_t timeout_in) { + ssl_sslsocket_obj_t *self = MP_OBJ_TO_PTR(self_in); + mp_uint_t timeout_ms; + if (timeout_in == mp_const_none) { + timeout_ms = -1; + } else { + #if MICROPY_PY_BUILTINS_FLOAT + timeout_ms = 1000 * mp_obj_get_float(timeout_in); + #else + timeout_ms = 1000 * mp_obj_get_int(timeout_in); + #endif + } + common_hal_ssl_sslsocket_settimeout(self, timeout_ms); + return mp_const_none; +} +STATIC MP_DEFINE_CONST_FUN_OBJ_2(ssl_sslsocket_settimeout_obj, ssl_sslsocket_settimeout); + +//| def setblocking(self, flag: bool) -> Optional[int]: +//| """Set the blocking behaviour of this socket. +//| +//| :param ~bool flag: False means non-blocking, True means block indefinitely.""" +//| ... +//| +// method socket.setblocking(flag) +STATIC mp_obj_t ssl_sslsocket_setblocking(mp_obj_t self_in, mp_obj_t blocking) { + ssl_sslsocket_obj_t *self = MP_OBJ_TO_PTR(self_in); + if (mp_obj_is_true(blocking)) { + common_hal_ssl_sslsocket_settimeout(self, -1); + } else { + common_hal_ssl_sslsocket_settimeout(self, 0); + } + return mp_const_none; +} +STATIC MP_DEFINE_CONST_FUN_OBJ_2(ssl_sslsocket_setblocking_obj, ssl_sslsocket_setblocking); + +//| def __hash__(self) -> int: +//| """Returns a hash for the Socket.""" +//| ... +//| +STATIC mp_obj_t ssl_sslsocket_unary_op(mp_unary_op_t op, mp_obj_t self_in) { + switch (op) { + case MP_UNARY_OP_HASH: { + return mp_obj_id(self_in); + } + default: + return MP_OBJ_NULL; // op not supported + } +} + +STATIC const mp_rom_map_elem_t ssl_sslsocket_locals_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR___enter__), MP_ROM_PTR(&default___enter___obj) }, + { MP_ROM_QSTR(MP_QSTR___exit__), MP_ROM_PTR(&ssl_sslsocket___exit___obj) }, + { MP_ROM_QSTR(MP_QSTR___del__), MP_ROM_PTR(&ssl_sslsocket_close_obj) }, + + { MP_ROM_QSTR(MP_QSTR_accept), MP_ROM_PTR(&ssl_sslsocket_accept_obj) }, + { MP_ROM_QSTR(MP_QSTR_bind), MP_ROM_PTR(&ssl_sslsocket_bind_obj) }, + { MP_ROM_QSTR(MP_QSTR_close), MP_ROM_PTR(&ssl_sslsocket_close_obj) }, + { MP_ROM_QSTR(MP_QSTR_connect), MP_ROM_PTR(&ssl_sslsocket_connect_obj) }, + { MP_ROM_QSTR(MP_QSTR_listen), MP_ROM_PTR(&ssl_sslsocket_listen_obj) }, + { MP_ROM_QSTR(MP_QSTR_recv_into), MP_ROM_PTR(&ssl_sslsocket_recv_into_obj) }, + { MP_ROM_QSTR(MP_QSTR_send), MP_ROM_PTR(&ssl_sslsocket_send_obj) }, + { MP_ROM_QSTR(MP_QSTR_setblocking), MP_ROM_PTR(&ssl_sslsocket_setblocking_obj) }, + // { MP_ROM_QSTR(MP_QSTR_setsockopt), MP_ROM_PTR(&ssl_sslsocket_setsockopt_obj) }, + { MP_ROM_QSTR(MP_QSTR_settimeout), MP_ROM_PTR(&ssl_sslsocket_settimeout_obj) }, +}; + +STATIC MP_DEFINE_CONST_DICT(ssl_sslsocket_locals_dict, ssl_sslsocket_locals_dict_table); + +const mp_obj_type_t ssl_sslsocket_type = { + { &mp_type_type }, + .name = MP_QSTR_SSLSocket, + .locals_dict = (mp_obj_dict_t*)&ssl_sslsocket_locals_dict, + .unary_op = ssl_sslsocket_unary_op, +}; diff --git a/shared-bindings/ssl/SSLSocket.h b/shared-bindings/ssl/SSLSocket.h new file mode 100644 index 000000000..d117e5dca --- /dev/null +++ b/shared-bindings/ssl/SSLSocket.h @@ -0,0 +1,45 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2020 Lucian Copeland for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#ifndef MICROPY_INCLUDED_SHARED_BINDINGS_SSL_SSLSOCKET_H +#define MICROPY_INCLUDED_SHARED_BINDINGS_SSL_SSLSOCKET_H + +#include "common-hal/ssl/SSLSocket.h" + +extern const mp_obj_type_t ssl_sslsocket_type; + +ssl_sslsocket_obj_t * common_hal_ssl_sslsocket_accept(ssl_sslsocket_obj_t* self, uint8_t* ip, uint32_t *port); +bool common_hal_ssl_sslsocket_bind(ssl_sslsocket_obj_t* self, const char* host, size_t hostlen, uint32_t port); +void common_hal_ssl_sslsocket_close(ssl_sslsocket_obj_t* self); +bool common_hal_ssl_sslsocket_connect(ssl_sslsocket_obj_t* self, const char* host, size_t hostlen, uint32_t port); +bool common_hal_ssl_sslsocket_get_closed(ssl_sslsocket_obj_t* self); +bool common_hal_ssl_sslsocket_get_connected(ssl_sslsocket_obj_t* self); +bool common_hal_ssl_sslsocket_listen(ssl_sslsocket_obj_t* self, int backlog); +mp_uint_t common_hal_ssl_sslsocket_recv_into(ssl_sslsocket_obj_t* self, const uint8_t* buf, uint32_t len); +mp_uint_t common_hal_ssl_sslsocket_send(ssl_sslsocket_obj_t* self, const uint8_t* buf, uint32_t len); +void common_hal_ssl_sslsocket_settimeout(ssl_sslsocket_obj_t* self, uint32_t timeout_ms); + +#endif // MICROPY_INCLUDED_SHARED_BINDINGS_SSL_SSLSOCKET_H diff --git a/shared-module/adafruit_bus_device/I2CDevice.c b/shared-module/adafruit_bus_device/I2CDevice.c index 792ab7183..6d80cf599 100644 --- a/shared-module/adafruit_bus_device/I2CDevice.c +++ b/shared-module/adafruit_bus_device/I2CDevice.c @@ -71,7 +71,7 @@ void common_hal_adafruit_bus_device_i2cdevice_probe_for_device(adafruit_bus_devi nlr_buf_t nlr; if (nlr_push(&nlr) == 0) { mp_load_method(self->i2c, MP_QSTR_writeto, dest); - dest[2] = mp_obj_new_int_from_ull(self->device_address); + dest[2] = MP_OBJ_NEW_SMALL_INT(self->device_address); dest[3] = write_buffer; mp_call_method_n_kw(2, 0, dest); nlr_pop(); diff --git a/shared-module/adafruit_bus_device/SPIDevice.c b/shared-module/adafruit_bus_device/SPIDevice.c index e489fc7c0..65649026a 100644 --- a/shared-module/adafruit_bus_device/SPIDevice.c +++ b/shared-module/adafruit_bus_device/SPIDevice.c @@ -41,7 +41,7 @@ void common_hal_adafruit_bus_device_spidevice_construct(adafruit_bus_device_spid self->chip_select = cs; } -void common_hal_adafruit_bus_device_spidevice_enter(adafruit_bus_device_spidevice_obj_t *self) { +mp_obj_t common_hal_adafruit_bus_device_spidevice_enter(adafruit_bus_device_spidevice_obj_t *self) { bool success = false; while (!success) { success = common_hal_busio_spi_try_lock(self->spi); @@ -54,6 +54,7 @@ void common_hal_adafruit_bus_device_spidevice_enter(adafruit_bus_device_spidevic if (self->chip_select != MP_OBJ_NULL) { common_hal_digitalio_digitalinout_set_value(MP_OBJ_TO_PTR(self->chip_select), false); } + return self->spi; } void common_hal_adafruit_bus_device_spidevice_exit(adafruit_bus_device_spidevice_obj_t *self) { diff --git a/supervisor/shared/background_callback.c b/supervisor/shared/background_callback.c index 288c9a4df..68a0a9667 100644 --- a/supervisor/shared/background_callback.c +++ b/supervisor/shared/background_callback.c @@ -33,7 +33,7 @@ #include "supervisor/shared/tick.h" #include "shared-bindings/microcontroller/__init__.h" -STATIC volatile background_callback_t *callback_head, *callback_tail; +STATIC volatile background_callback_t * volatile callback_head, * volatile callback_tail; #define CALLBACK_CRITICAL_BEGIN (common_hal_mcu_disable_interrupts()) #define CALLBACK_CRITICAL_END (common_hal_mcu_enable_interrupts()) @@ -50,7 +50,6 @@ void background_callback_add_core(background_callback_t *cb) { cb->prev = (background_callback_t*)callback_tail; if (callback_tail) { callback_tail->next = cb; - cb->prev = (background_callback_t*)callback_tail; } if (!callback_head) { callback_head = cb; diff --git a/supervisor/shared/serial.c b/supervisor/shared/serial.c index 303f89e75..b9feb04f2 100644 --- a/supervisor/shared/serial.c +++ b/supervisor/shared/serial.c @@ -47,6 +47,10 @@ busio_uart_obj_t debug_uart; byte buf_array[64]; #endif +#if CIRCUITPY_USB_VENDOR +bool tud_vendor_connected(void); +#endif + void serial_early_init(void) { #if defined(DEBUG_UART_TX) && defined(DEBUG_UART_RX) debug_uart.base.type = &busio_uart_type; @@ -66,6 +70,12 @@ void serial_init(void) { } bool serial_connected(void) { +#if CIRCUITPY_USB_VENDOR + if (tud_vendor_connected()) { + return true; + } +#endif + #if defined(DEBUG_UART_TX) && defined(DEBUG_UART_RX) return true; #else @@ -74,6 +84,14 @@ bool serial_connected(void) { } char serial_read(void) { +#if CIRCUITPY_USB_VENDOR + if (tud_vendor_connected() && tud_vendor_available() > 0) { + char tiny_buffer; + tud_vendor_read(&tiny_buffer, 1); + return tiny_buffer; + } +#endif + #if defined(DEBUG_UART_TX) && defined(DEBUG_UART_RX) if (tud_cdc_connected() && tud_cdc_available() > 0) { return (char) tud_cdc_read_char(); @@ -88,6 +106,12 @@ char serial_read(void) { } bool serial_bytes_available(void) { +#if CIRCUITPY_USB_VENDOR + if (tud_vendor_connected() && tud_vendor_available() > 0) { + return true; + } +#endif + #if defined(DEBUG_UART_TX) && defined(DEBUG_UART_RX) return common_hal_busio_uart_rx_characters_available(&debug_uart) || (tud_cdc_available() > 0); #else @@ -104,6 +128,12 @@ void serial_write_substring(const char* text, uint32_t length) { common_hal_terminalio_terminal_write(&supervisor_terminal, (const uint8_t*) text, length, &errcode); #endif +#if CIRCUITPY_USB_VENDOR + if (tud_vendor_connected()) { + tud_vendor_write(text, length); + } +#endif + uint32_t count = 0; while (count < length && tud_cdc_connected()) { count += tud_cdc_write(text + count, length - count); diff --git a/supervisor/shared/usb/tusb_config.h b/supervisor/shared/usb/tusb_config.h index 15d9fabaf..d3a35f537 100644 --- a/supervisor/shared/usb/tusb_config.h +++ b/supervisor/shared/usb/tusb_config.h @@ -68,6 +68,7 @@ #define CFG_TUD_MSC 1 #define CFG_TUD_HID CIRCUITPY_USB_HID #define CFG_TUD_MIDI CIRCUITPY_USB_MIDI +#define CFG_TUD_VENDOR CIRCUITPY_USB_VENDOR #define CFG_TUD_CUSTOM_CLASS 0 /*------------------------------------------------------------------*/ diff --git a/supervisor/shared/usb/usb.c b/supervisor/shared/usb/usb.c index 07c6aee6c..43564d5d5 100644 --- a/supervisor/shared/usb/usb.c +++ b/supervisor/shared/usb/usb.c @@ -37,6 +37,19 @@ #include "tusb.h" +#if CIRCUITPY_USB_VENDOR +#include "genhdr/autogen_usb_descriptor.h" + +// The WebUSB support being conditionally added to this file is based on the +// tinyusb demo examples/device/webusb_serial. + +extern const tusb_desc_webusb_url_t desc_webusb_url; + +static bool web_serial_connected = false; +#endif + + + // Serial number as hex characters. This writes directly to the USB // descriptor. extern uint16_t usb_serial_number[1 + COMMON_HAL_MCU_PROCESSOR_UID_LENGTH * 2]; @@ -98,9 +111,14 @@ static void usb_background_do(void* unused) { usb_background(); } +void usb_background_schedule(void) +{ + background_callback_add(&usb_callback, usb_background_do, NULL); +} + void usb_irq_handler(void) { tud_int_handler(0); - background_callback_add(&usb_callback, usb_background_do, NULL); + usb_background_schedule(); } //--------------------------------------------------------------------+ @@ -145,6 +163,62 @@ void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) { } } +#if CIRCUITPY_USB_VENDOR +//--------------------------------------------------------------------+ +// WebUSB use vendor class +//--------------------------------------------------------------------+ + +bool tud_vendor_connected(void) +{ + return web_serial_connected; +} + +// Invoked when a control transfer occurred on an interface of this class +// Driver response accordingly to the request and the transfer stage (setup/data/ack) +// return false to stall control endpoint (e.g unsupported request) +bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const * request) +{ + // nothing to with DATA & ACK stage + if (stage != CONTROL_STAGE_SETUP ) return true; + + switch (request->bRequest) + { + case VENDOR_REQUEST_WEBUSB: + // match vendor request in BOS descriptor + // Get landing page url + return tud_control_xfer(rhport, request, (void*) &desc_webusb_url, desc_webusb_url.bLength); + + case VENDOR_REQUEST_MICROSOFT: + if ( request->wIndex == 7 ) + { + // Get Microsoft OS 2.0 compatible descriptor + uint16_t total_len; + memcpy(&total_len, desc_ms_os_20+8, 2); + + return tud_control_xfer(rhport, request, (void*) desc_ms_os_20, total_len); + } else + { + return false; + } + + case 0x22: + // Webserial simulate the CDC_REQUEST_SET_CONTROL_LINE_STATE (0x22) to + // connect and disconnect. + web_serial_connected = (request->wValue != 0); + + // response with status OK + return tud_control_status(rhport, request); + + default: + // stall unknown request + return false; + } + + return true; +} +#endif CIRCUITPY_USB_VENDOR + + #if MICROPY_KBD_EXCEPTION /** diff --git a/supervisor/supervisor.mk b/supervisor/supervisor.mk index a59e99e3d..f559e004e 100644 --- a/supervisor/supervisor.mk +++ b/supervisor/supervisor.mk @@ -102,6 +102,11 @@ else shared-module/usb_midi/PortOut.c endif + ifeq ($(CIRCUITPY_USB_VENDOR), 1) + SRC_SUPERVISOR += \ + lib/tinyusb/src/class/vendor/vendor_device.c + endif + CFLAGS += -DUSB_AVAILABLE endif @@ -119,6 +124,12 @@ ifndef USB_INTERFACE_NAME USB_INTERFACE_NAME = "CircuitPython" endif +# In the following URL, don't include the https:// prefix. +# It gets added automatically. +ifndef USB_WEBUSB_URL +USB_WEBUSB_URL = "circuitpython.org" +endif + USB_DEVICES_COMPUTED := CDC,MSC ifeq ($(CIRCUITPY_USB_MIDI),1) USB_DEVICES_COMPUTED := $(USB_DEVICES_COMPUTED),AUDIO @@ -126,6 +137,9 @@ endif ifeq ($(CIRCUITPY_USB_HID),1) USB_DEVICES_COMPUTED := $(USB_DEVICES_COMPUTED),HID endif +ifeq ($(CIRCUITPY_USB_VENDOR),1) +USB_DEVICES_COMPUTED := $(USB_DEVICES_COMPUTED),VENDOR +endif USB_DEVICES ?= "$(USB_DEVICES_COMPUTED)" ifndef USB_HID_DEVICES @@ -198,6 +212,12 @@ USB_DESCRIPTOR_ARGS = \ --output_c_file $(BUILD)/autogen_usb_descriptor.c\ --output_h_file $(BUILD)/genhdr/autogen_usb_descriptor.h +ifeq ($(CIRCUITPY_USB_VENDOR), 1) +USB_DESCRIPTOR_ARGS += \ + --vendor_ep_num_out 0 --vendor_ep_num_in 0 \ + --webusb_url $(USB_WEBUSB_URL) +endif + ifeq ($(USB_RENUMBER_ENDPOINTS), 0) USB_DESCRIPTOR_ARGS += --no-renumber_endpoints endif diff --git a/supervisor/usb.h b/supervisor/usb.h index ccb35470c..1c709926a 100644 --- a/supervisor/usb.h +++ b/supervisor/usb.h @@ -35,6 +35,9 @@ // it may be necessary to call it directly. void usb_background(void); +// Schedule usb background +void usb_background_schedule(void); + // Ports must call this from their particular USB IRQ handler void usb_irq_handler(void); diff --git a/tests/manual/audiocore/jeplayer-splash-16000-16bit-mono-signed.wav b/tests/manual/audiocore/jeplayer-splash-16000-16bit-mono-signed.wav Binary files differnew file mode 100644 index 000000000..cd3da395b --- /dev/null +++ b/tests/manual/audiocore/jeplayer-splash-16000-16bit-mono-signed.wav diff --git a/tests/manual/audiocore/jeplayer-splash-16000-16bit-stereo-signed.wav b/tests/manual/audiocore/jeplayer-splash-16000-16bit-stereo-signed.wav Binary files differnew file mode 100644 index 000000000..c1036475b --- /dev/null +++ b/tests/manual/audiocore/jeplayer-splash-16000-16bit-stereo-signed.wav diff --git a/tests/manual/audiocore/jeplayer-splash-16000-24bit-mono-signed.wav b/tests/manual/audiocore/jeplayer-splash-16000-24bit-mono-signed.wav Binary files differnew file mode 100644 index 000000000..6aa6afc7a --- /dev/null +++ b/tests/manual/audiocore/jeplayer-splash-16000-24bit-mono-signed.wav diff --git a/tests/manual/audiocore/jeplayer-splash-16000-24bit-stereo-signed.wav b/tests/manual/audiocore/jeplayer-splash-16000-24bit-stereo-signed.wav Binary files differnew file mode 100644 index 000000000..c175aaf61 --- /dev/null +++ b/tests/manual/audiocore/jeplayer-splash-16000-24bit-stereo-signed.wav diff --git a/tests/manual/audiocore/jeplayer-splash-16000-8bit-mono-unsigned.wav b/tests/manual/audiocore/jeplayer-splash-16000-8bit-mono-unsigned.wav Binary files differnew file mode 100644 index 000000000..ccf63b9c1 --- /dev/null +++ b/tests/manual/audiocore/jeplayer-splash-16000-8bit-mono-unsigned.wav diff --git a/tests/manual/audiocore/jeplayer-splash-16000-8bit-stereo-unsigned.wav b/tests/manual/audiocore/jeplayer-splash-16000-8bit-stereo-unsigned.wav Binary files differnew file mode 100644 index 000000000..63aaa5b29 --- /dev/null +++ b/tests/manual/audiocore/jeplayer-splash-16000-8bit-stereo-unsigned.wav diff --git a/tests/manual/audiocore/jeplayer-splash-44100-16bit-mono-signed.wav b/tests/manual/audiocore/jeplayer-splash-44100-16bit-mono-signed.wav Binary files differnew file mode 100644 index 000000000..147b14b16 --- /dev/null +++ b/tests/manual/audiocore/jeplayer-splash-44100-16bit-mono-signed.wav diff --git a/tests/manual/audiocore/jeplayer-splash-44100-16bit-stereo-signed.wav b/tests/manual/audiocore/jeplayer-splash-44100-16bit-stereo-signed.wav Binary files differnew file mode 100644 index 000000000..adfe84fb0 --- /dev/null +++ b/tests/manual/audiocore/jeplayer-splash-44100-16bit-stereo-signed.wav diff --git a/tests/manual/audiocore/jeplayer-splash-44100-24bit-mono-signed.wav b/tests/manual/audiocore/jeplayer-splash-44100-24bit-mono-signed.wav Binary files differnew file mode 100644 index 000000000..2c5337045 --- /dev/null +++ b/tests/manual/audiocore/jeplayer-splash-44100-24bit-mono-signed.wav diff --git a/tests/manual/audiocore/jeplayer-splash-44100-24bit-stereo-signed.wav b/tests/manual/audiocore/jeplayer-splash-44100-24bit-stereo-signed.wav Binary files differnew file mode 100644 index 000000000..a290c6c37 --- /dev/null +++ b/tests/manual/audiocore/jeplayer-splash-44100-24bit-stereo-signed.wav diff --git a/tests/manual/audiocore/jeplayer-splash-44100-8bit-mono-unsigned.wav b/tests/manual/audiocore/jeplayer-splash-44100-8bit-mono-unsigned.wav Binary files differnew file mode 100644 index 000000000..cd1c79280 --- /dev/null +++ b/tests/manual/audiocore/jeplayer-splash-44100-8bit-mono-unsigned.wav diff --git a/tests/manual/audiocore/jeplayer-splash-44100-8bit-stereo-unsigned.wav b/tests/manual/audiocore/jeplayer-splash-44100-8bit-stereo-unsigned.wav Binary files differnew file mode 100644 index 000000000..12c48e258 --- /dev/null +++ b/tests/manual/audiocore/jeplayer-splash-44100-8bit-stereo-unsigned.wav diff --git a/tests/manual/audiocore/jeplayer-splash-44100-stereo.mp3 b/tests/manual/audiocore/jeplayer-splash-44100-stereo.mp3 Binary files differnew file mode 100644 index 000000000..fd820e69a --- /dev/null +++ b/tests/manual/audiocore/jeplayer-splash-44100-stereo.mp3 diff --git a/tests/manual/audiocore/jeplayer-splash-8000-16bit-mono-signed.wav b/tests/manual/audiocore/jeplayer-splash-8000-16bit-mono-signed.wav Binary files differnew file mode 100644 index 000000000..a730c2b84 --- /dev/null +++ b/tests/manual/audiocore/jeplayer-splash-8000-16bit-mono-signed.wav diff --git a/tests/manual/audiocore/jeplayer-splash-8000-16bit-stereo-signed.wav b/tests/manual/audiocore/jeplayer-splash-8000-16bit-stereo-signed.wav Binary files differnew file mode 100644 index 000000000..5038ae8ae --- /dev/null +++ b/tests/manual/audiocore/jeplayer-splash-8000-16bit-stereo-signed.wav diff --git a/tests/manual/audiocore/jeplayer-splash-8000-24bit-mono-signed.wav b/tests/manual/audiocore/jeplayer-splash-8000-24bit-mono-signed.wav Binary files differnew file mode 100644 index 000000000..ac25cddb3 --- /dev/null +++ b/tests/manual/audiocore/jeplayer-splash-8000-24bit-mono-signed.wav diff --git a/tests/manual/audiocore/jeplayer-splash-8000-24bit-stereo-signed.wav b/tests/manual/audiocore/jeplayer-splash-8000-24bit-stereo-signed.wav Binary files differnew file mode 100644 index 000000000..6fec67431 --- /dev/null +++ b/tests/manual/audiocore/jeplayer-splash-8000-24bit-stereo-signed.wav diff --git a/tests/manual/audiocore/jeplayer-splash-8000-8bit-mono-unsigned.wav b/tests/manual/audiocore/jeplayer-splash-8000-8bit-mono-unsigned.wav Binary files differnew file mode 100644 index 000000000..d5e49b24b --- /dev/null +++ b/tests/manual/audiocore/jeplayer-splash-8000-8bit-mono-unsigned.wav diff --git a/tests/manual/audiocore/jeplayer-splash-8000-8bit-stereo-unsigned.wav b/tests/manual/audiocore/jeplayer-splash-8000-8bit-stereo-unsigned.wav Binary files differnew file mode 100644 index 000000000..3df7945aa --- /dev/null +++ b/tests/manual/audiocore/jeplayer-splash-8000-8bit-stereo-unsigned.wav diff --git a/tests/manual/audiopwmio/single_buffer_loop.py b/tests/manual/audiopwmio/single_buffer_loop.py new file mode 100644 index 000000000..dfac475b5 --- /dev/null +++ b/tests/manual/audiopwmio/single_buffer_loop.py @@ -0,0 +1,65 @@ +import audiocore +import audiopwmio +import board +import digitalio +import array +import time +import math + +trigger = digitalio.DigitalInOut(board.D4) +trigger.switch_to_output(True) + +# Generate one period of sine wav. +length = 8000 // 440 + +samples = [] +sample_names = [ +"unsigned 8 bit", +"signed 8 bit", +"unsigned 16 bit", +"signed 16 bit" +] + + +# unsigned 8 bit +u8 = array.array("B", [0] * length) +for i in range(length): + u8[i] = int(math.sin(math.pi * 2 * i / length) * (2 ** 7) + 2 ** 7) + +samples.append(audiocore.RawSample(u8, sample_rate=4000)) + +# signed 8 bit +s8 = array.array("b", [0] * length) +for i in range(length): + s8[i] = int(math.sin(math.pi * 2 * i / length) * (2 ** 7)) + +samples.append(audiocore.RawSample(s8, sample_rate=16000)) + +# unsigned 16 bit +u16 = array.array("H", [0] * length) +for i in range(length): + u16[i] = int(math.sin(math.pi * 2 * i / length) * (2 ** 15) + 2 ** 15) + +samples.append(audiocore.RawSample(u16, sample_rate=8000)) + + +# signed 16 bit +s16 = array.array("h", [0] * length) +for i in range(length): + s16[i] = int(math.sin(math.pi * 2 * i / length) * (2 ** 15)) + +samples.append(audiocore.RawSample(s16, sample_rate=8000)) + + +dac = audiopwmio.PWMAudioOut(board.D13) +for sample, name in zip(samples, sample_names): + print(name) + trigger.value = False + dac.play(sample, loop=True) + time.sleep(1) + dac.stop() + time.sleep(0.1) + trigger.value = True + print() + +print("done") diff --git a/tests/manual/audiopwmio/wavefile_pause_resume.py b/tests/manual/audiopwmio/wavefile_pause_resume.py new file mode 100644 index 000000000..27912d321 --- /dev/null +++ b/tests/manual/audiopwmio/wavefile_pause_resume.py @@ -0,0 +1,39 @@ +import audiocore +import audiopwmio +import board +import digitalio +import time +import math +import os + +trigger = digitalio.DigitalInOut(board.D4) +trigger.switch_to_output(True) + +sample_prefix = "jeplayer-splash" + +samples = [] +for fn in os.listdir("/"): + if fn.startswith(sample_prefix): + samples.append(fn) + +dac = audiopwmio.PWMAudioOut(left_channel=board.D12, right_channel=board.D13) +for filename in samples: + print("playing", filename) + with open(filename, "rb") as sample_file: + try: + sample = audiocore.WaveFile(sample_file) + except OSError as e: + print(e) + continue + trigger.value = False + dac.play(sample) + while dac.playing: + time.sleep(0.1) + dac.pause() + time.sleep(0.1) + dac.resume() + trigger.value = True + time.sleep(0.1) + print() + +print("done") diff --git a/tests/manual/audiopwmio/wavefile_playback.py b/tests/manual/audiopwmio/wavefile_playback.py new file mode 100644 index 000000000..0adbf2b19 --- /dev/null +++ b/tests/manual/audiopwmio/wavefile_playback.py @@ -0,0 +1,36 @@ +import audiocore +import audiopwmio +import board +import digitalio +import time +import math +import os + +trigger = digitalio.DigitalInOut(board.D4) +trigger.switch_to_output(True) + +sample_prefix = "jeplayer-splash" + +samples = [] +for fn in os.listdir("/"): + if fn.startswith(sample_prefix): + samples.append(fn) + +dac = audiopwmio.PWMAudioOut(left_channel=board.D12, right_channel=board.D13) +for filename in samples: + print("playing", filename) + with open(filename, "rb") as sample_file: + try: + sample = audiocore.WaveFile(sample_file) + except OSError as e: + print(e) + continue + trigger.value = False + dac.play(sample) + while dac.playing: + time.sleep(1) + trigger.value = True + time.sleep(0.1) + print() + +print("done") diff --git a/tools/gen_display_resources.py b/tools/gen_display_resources.py index 6657b6a27..141e6ee2a 100644 --- a/tools/gen_display_resources.py +++ b/tools/gen_display_resources.py @@ -8,8 +8,8 @@ import os import struct import sys -sys.path.append("bitmap_font") -sys.path.append("../../tools/bitmap_font") +sys.path.insert(0, "bitmap_font") +sys.path.insert(0, "../../tools/bitmap_font") from adafruit_bitmap_font import bitmap_font diff --git a/tools/gen_usb_descriptor.py b/tools/gen_usb_descriptor.py index 672f09c88..80dddeb00 100644 --- a/tools/gen_usb_descriptor.py +++ b/tools/gen_usb_descriptor.py @@ -13,7 +13,7 @@ from adafruit_usb_descriptor import audio, audio10, cdc, hid, midi, msc, standar import hid_report_descriptors DEFAULT_INTERFACE_NAME = 'CircuitPython' -ALL_DEVICES='CDC,MSC,AUDIO,HID' +ALL_DEVICES='CDC,MSC,AUDIO,HID,VENDOR' ALL_DEVICES_SET=frozenset(ALL_DEVICES.split(',')) DEFAULT_DEVICES='CDC,MSC,AUDIO,HID' @@ -22,6 +22,9 @@ ALL_HID_DEVICES_SET=frozenset(ALL_HID_DEVICES.split(',')) # Digitizer works on Linux but conflicts with mouse, so omit it. DEFAULT_HID_DEVICES='KEYBOARD,MOUSE,CONSUMER,GAMEPAD' +# In the following URL, don't include the https:// because that prefix gets added automatically +DEFAULT_WEBUSB_URL = 'circuitpython.org' # In the future, this may become a specific landing page + parser = argparse.ArgumentParser(description='Generate USB descriptors.') parser.add_argument('--highspeed', default=False, action='store_true', help='descriptor for highspeed device') @@ -62,6 +65,13 @@ parser.add_argument('--midi_ep_num_out', type=int, default=0, help='endpoint number of MIDI OUT') parser.add_argument('--midi_ep_num_in', type=int, default=0, help='endpoint number of MIDI IN') +parser.add_argument('--webusb_url', type=str, + help='The URL to include in the WebUSB URL Descriptor', + default=DEFAULT_WEBUSB_URL) +parser.add_argument('--vendor_ep_num_out', type=int, default=0, + help='endpoint number of VENDOR OUT') +parser.add_argument('--vendor_ep_num_in', type=int, default=0, + help='endpoint number of VENDOR IN') parser.add_argument('--max_ep', type=int, default=0, help='total number of endpoints available') parser.add_argument('--output_c_file', type=argparse.FileType('w', encoding='UTF-8'), required=True) @@ -89,21 +99,27 @@ if not args.renumber_endpoints: if 'MSC' in args.devices: if args.msc_ep_num_out == 0: raise ValueError("MSC endpoint OUT number must not be 0") - elif args.msc_ep_num_in == 0: + elif args.msc_ep_num_in == 0: raise ValueError("MSC endpoint IN number must not be 0") if 'HID' in args.devices: if args.args.hid_ep_num_out == 0: raise ValueError("HID endpoint OUT number must not be 0") - elif args.hid_ep_num_in == 0: + elif args.hid_ep_num_in == 0: raise ValueError("HID endpoint IN number must not be 0") if 'AUDIO' in args.devices: if args.args.midi_ep_num_out == 0: raise ValueError("MIDI endpoint OUT number must not be 0") - elif args.midi_ep_num_in == 0: + elif args.midi_ep_num_in == 0: raise ValueError("MIDI endpoint IN number must not be 0") + if 'VENDOR' in args.devices: + if args.vendor_ep_num_out == 0: + raise ValueError("VENDOR endpoint OUT number must not be 0") + elif args.vendor_ep_num_in == 0: + raise ValueError("VENDOR endpoint IN number must not be 0") + class StringIndex: """Assign a monotonically increasing index to each unique string. Start with 0.""" string_to_index = {} @@ -359,6 +375,35 @@ audio_control_interface = standard.InterfaceDescriptor( # Audio streaming interfaces must occur before MIDI ones. audio_interfaces = [audio_control_interface] + cs_ac_interface.audio_streaming_interfaces + cs_ac_interface.midi_streaming_interfaces +# Vendor-specific interface, for example WebUSB +vendor_endpoint_in_descriptor = standard.EndpointDescriptor( + description="VENDOR in", + bEndpointAddress=args.vendor_ep_num_in | standard.EndpointDescriptor.DIRECTION_IN, + bmAttributes=standard.EndpointDescriptor.TYPE_BULK, + bInterval=16) + +vendor_endpoint_out_descriptor = standard.EndpointDescriptor( + description="VENDOR out", + bEndpointAddress=args.vendor_ep_num_out | standard.EndpointDescriptor.DIRECTION_OUT, + bmAttributes=standard.EndpointDescriptor.TYPE_BULK, + bInterval=16) + +# We do the following conditionally to avoid adding unused entries to the StringIndex table +if 'VENDOR' in args.devices: + vendor_interface = standard.InterfaceDescriptor( + description="VENDOR", + bInterfaceClass=0xff, # Vendor-specific + bInterfaceSubClass=0x00, + bInterfaceProtocol=0x00, + iInterface=StringIndex.index("{} VENDOR".format(args.interface_name)), + subdescriptors=[ + vendor_endpoint_in_descriptor, + vendor_endpoint_out_descriptor, + ] + ) + + vendor_interfaces = [vendor_interface] + interfaces_to_join = [] if 'CDC' in args.devices: @@ -373,6 +418,9 @@ if 'HID' in args.devices: if 'AUDIO' in args.devices: interfaces_to_join.append(audio_interfaces) +if 'VENDOR' in args.devices: + interfaces_to_join.append(vendor_interfaces) + # util.join_interfaces() will renumber the endpoints to make them unique across descriptors, # and renumber the interfaces in order. But we still need to fix up certain # interface cross-references. @@ -425,6 +473,9 @@ if 'AUDIO' in args.devices: # correct ordering. descriptor_list.append(audio_control_interface) +if 'VENDOR' in args.devices: + descriptor_list.extend(vendor_interfaces) + # Finally, build the composite descriptor. configuration = standard.ConfigurationDescriptor( @@ -444,6 +495,7 @@ h_file = args.output_h_file c_file.write("""\ #include <stdint.h> +#include "tusb.h" #include "py/objtuple.h" #include "shared-bindings/usb_hid/Device.h" #include "{H_FILE_NAME}" @@ -550,7 +602,7 @@ c_file.write("\n") hid_descriptor_length = len(bytes(combined_hid_report_descriptor)) -# Now we values we need for the .h file. +# Now the values we need for the .h file. h_file.write("""\ #ifndef MICROPY_INCLUDED_AUTOGEN_USB_DESCRIPTOR_H #define MICROPY_INCLUDED_AUTOGEN_USB_DESCRIPTOR_H @@ -586,7 +638,27 @@ extern const uint8_t hid_report_descriptor[{hid_report_descriptor_length}]; msc_vendor=args.manufacturer[:8], msc_product=args.product[:16])) +if 'VENDOR' in args.devices: + h_file.write("""\ +enum +{ + VENDOR_REQUEST_WEBUSB = 1, + VENDOR_REQUEST_MICROSOFT = 2 +}; + +extern uint8_t const desc_ms_os_20[]; + +// Currently getting compile-time errors in files like tusb_fifo.c +// if we try do define this here (TODO figure this out!) +//extern const tusb_desc_webusb_url_t desc_webusb_url; + +""") + +h_file.write("""\ +#endif // MICROPY_INCLUDED_AUTOGEN_USB_DESCRIPTOR_H +""") # Write out the report descriptor and info + c_file.write("""\ const uint8_t hid_report_descriptor[{HID_DESCRIPTOR_LENGTH}] = {{ """.format(HID_DESCRIPTOR_LENGTH=hid_descriptor_length)) @@ -655,6 +727,96 @@ c_file.write("""\ }; """) -h_file.write("""\ -#endif // MICROPY_INCLUDED_AUTOGEN_USB_DESCRIPTOR_H -""") +if 'VENDOR' in args.devices: + # Mimic what the tinyusb webusb demo does in it's main.c file + c_file.write(""" +#define URL "{webusb_url}" + +const tusb_desc_webusb_url_t desc_webusb_url = +{{ + .bLength = 3 + sizeof(URL) - 1, + .bDescriptorType = 3, // WEBUSB URL type + .bScheme = 1, // 0: http, 1: https, 255: "" + .url = URL +}}; + +// These next two hardcoded descriptors were pulled from the usb_descriptor.c file +// of the tinyusb webusb_serial demo. TODO - this is probably something else to +// integrate into the adafruit_usb_descriptors project... + +//--------------------------------------------------------------------+ +// BOS Descriptor +//--------------------------------------------------------------------+ + +/* Microsoft OS 2.0 registry property descriptor +Per MS requirements https://msdn.microsoft.com/en-us/library/windows/hardware/hh450799(v=vs.85).aspx +device should create DeviceInterfaceGUIDs. It can be done by driver and +in case of real PnP solution device should expose MS "Microsoft OS 2.0 +registry property descriptor". Such descriptor can insert any record +into Windows registry per device/configuration/interface. In our case it +will insert "DeviceInterfaceGUIDs" multistring property. + +GUID is freshly generated and should be OK to use. + +https://developers.google.com/web/fundamentals/native-hardware/build-for-webusb/ +(Section Microsoft OS compatibility descriptors) +*/ + +#define BOS_TOTAL_LEN (TUD_BOS_DESC_LEN + TUD_BOS_WEBUSB_DESC_LEN + TUD_BOS_MICROSOFT_OS_DESC_LEN) + +#define MS_OS_20_DESC_LEN 0xB2 + +// BOS Descriptor is required for webUSB +uint8_t const desc_bos[] = +{{ + // total length, number of device caps + TUD_BOS_DESCRIPTOR(BOS_TOTAL_LEN, 2), + + // Vendor Code, iLandingPage + TUD_BOS_WEBUSB_DESCRIPTOR(VENDOR_REQUEST_WEBUSB, 1), + + // Microsoft OS 2.0 descriptor + TUD_BOS_MS_OS_20_DESCRIPTOR(MS_OS_20_DESC_LEN, VENDOR_REQUEST_MICROSOFT) +}}; + +uint8_t const * tud_descriptor_bos_cb(void) +{{ + return desc_bos; +}} + + +#define ITF_NUM_VENDOR {webusb_interface} // used in this next descriptor + +uint8_t const desc_ms_os_20[] = +{{ + // Set header: length, type, windows version, total length + U16_TO_U8S_LE(0x000A), U16_TO_U8S_LE(MS_OS_20_SET_HEADER_DESCRIPTOR), U32_TO_U8S_LE(0x06030000), U16_TO_U8S_LE(MS_OS_20_DESC_LEN), + + // Configuration subset header: length, type, configuration index, reserved, configuration total length + U16_TO_U8S_LE(0x0008), U16_TO_U8S_LE(MS_OS_20_SUBSET_HEADER_CONFIGURATION), 0, 0, U16_TO_U8S_LE(MS_OS_20_DESC_LEN-0x0A), + + // Function Subset header: length, type, first interface, reserved, subset length + U16_TO_U8S_LE(0x0008), U16_TO_U8S_LE(MS_OS_20_SUBSET_HEADER_FUNCTION), ITF_NUM_VENDOR, 0, U16_TO_U8S_LE(MS_OS_20_DESC_LEN-0x0A-0x08), + + // MS OS 2.0 Compatible ID descriptor: length, type, compatible ID, sub compatible ID + U16_TO_U8S_LE(0x0014), U16_TO_U8S_LE(MS_OS_20_FEATURE_COMPATBLE_ID), 'W', 'I', 'N', 'U', 'S', 'B', 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // sub-compatible + + // MS OS 2.0 Registry property descriptor: length, type + U16_TO_U8S_LE(MS_OS_20_DESC_LEN-0x0A-0x08-0x08-0x14), U16_TO_U8S_LE(MS_OS_20_FEATURE_REG_PROPERTY), + U16_TO_U8S_LE(0x0007), U16_TO_U8S_LE(0x002A), // wPropertyDataType, wPropertyNameLength and PropertyName "DeviceInterfaceGUIDs\0" in UTF-16 + 'D', 0x00, 'e', 0x00, 'v', 0x00, 'i', 0x00, 'c', 0x00, 'e', 0x00, 'I', 0x00, 'n', 0x00, 't', 0x00, 'e', 0x00, + 'r', 0x00, 'f', 0x00, 'a', 0x00, 'c', 0x00, 'e', 0x00, 'G', 0x00, 'U', 0x00, 'I', 0x00, 'D', 0x00, 's', 0x00, 0x00, 0x00, + U16_TO_U8S_LE(0x0050), // wPropertyDataLength + //bPropertyData: “{{975F44D9-0D08-43FD-8B3E-127CA8AFFF9D}}”. + '{{', 0x00, '9', 0x00, '7', 0x00, '5', 0x00, 'F', 0x00, '4', 0x00, '4', 0x00, 'D', 0x00, '9', 0x00, '-', 0x00, + '0', 0x00, 'D', 0x00, '0', 0x00, '8', 0x00, '-', 0x00, '4', 0x00, '3', 0x00, 'F', 0x00, 'D', 0x00, '-', 0x00, + '8', 0x00, 'B', 0x00, '3', 0x00, 'E', 0x00, '-', 0x00, '1', 0x00, '2', 0x00, '7', 0x00, 'C', 0x00, 'A', 0x00, + '8', 0x00, 'A', 0x00, 'F', 0x00, 'F', 0x00, 'F', 0x00, '9', 0x00, 'D', 0x00, '}}', 0x00, 0x00, 0x00, 0x00, 0x00 +}}; + +TU_VERIFY_STATIC(sizeof(desc_ms_os_20) == MS_OS_20_DESC_LEN, "Incorrect size"); + +// End of section about desc_ms_os_20 + +""".format(webusb_url=args.webusb_url, webusb_interface=vendor_interface.bInterfaceNumber)) |