diff options
43 files changed, 587 insertions, 119 deletions
diff --git a/lib/mp-readline/readline.c b/lib/mp-readline/readline.c index 464916ca4..6da71c40f 100644 --- a/lib/mp-readline/readline.c +++ b/lib/mp-readline/readline.c @@ -144,7 +144,7 @@ int readline_process_char(int c) { goto right_arrow_key; } else if (c == CHAR_CTRL_K) { // CTRL-K is kill from cursor to end-of-line, inclusive - vstr_cut_tail_bytes(rl.line, last_line_len - rl.cursor_pos); + vstr_cut_tail_bytes(rl.line, rl.line->len - rl.cursor_pos); // set redraw parameters redraw_from_cursor = true; } else if (c == CHAR_CTRL_N) { @@ -155,6 +155,7 @@ int readline_process_char(int c) { goto up_arrow_key; } else if (c == CHAR_CTRL_U) { // CTRL-U is kill from beginning-of-line up to cursor + cont_chars = count_cont_bytes(rl.line->buf+rl.orig_line_len, rl.line->buf+rl.cursor_pos); vstr_cut_out_bytes(rl.line, rl.orig_line_len, rl.cursor_pos - rl.orig_line_len); // set redraw parameters redraw_step_back = rl.cursor_pos - rl.orig_line_len; @@ -342,6 +343,7 @@ left_arrow_key: if (c == '~') { if (rl.escape_seq_buf[0] == '1' || rl.escape_seq_buf[0] == '7') { home_key: + cont_chars = count_cont_bytes(rl.line->buf+rl.orig_line_len, rl.line->buf+rl.cursor_pos); redraw_step_back = rl.cursor_pos - rl.orig_line_len; } else if (rl.escape_seq_buf[0] == '4' || rl.escape_seq_buf[0] == '8') { end_key: @@ -352,7 +354,12 @@ end_key: delete_key: #endif if (rl.cursor_pos < rl.line->len) { - vstr_cut_out_bytes(rl.line, rl.cursor_pos, 1); + size_t len = 1; + while (UTF8_IS_CONT(rl.line->buf[rl.cursor_pos+len]) && + rl.cursor_pos+len < rl.line->len) { + len++; + } + vstr_cut_out_bytes(rl.line, rl.cursor_pos, len); redraw_from_cursor = true; } } else { diff --git a/locale/ID.po b/locale/ID.po index b553c6749..ec5b6f6e8 100644 --- a/locale/ID.po +++ b/locale/ID.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: 2020-07-06 18:10+0000\n" "Last-Translator: oon arfiandwi <oon.arfiandwi@gmail.com>\n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -764,7 +764,7 @@ msgstr "Error pada regex" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "Diharapkan %q" @@ -1352,6 +1352,15 @@ msgstr "Tambahkan module apapun pada filesystem\n" msgid "Polygon needs at least 3 points" msgstr "" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "" @@ -1366,6 +1375,10 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "" +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot index ffb2e91ef..1e227dcbc 100644 --- a/locale/circuitpython.pot +++ b/locale/circuitpython.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -744,7 +744,7 @@ msgstr "" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "" @@ -1328,6 +1328,15 @@ msgstr "" msgid "Polygon needs at least 3 points" msgstr "" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "" @@ -1340,6 +1349,10 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "" +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" diff --git a/locale/cs.po b/locale/cs.po index c1a8ded4e..b353f4630 100644 --- a/locale/cs.po +++ b/locale/cs.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: 2020-05-24 03:22+0000\n" "Last-Translator: dronecz <mzuzelka@gmail.com>\n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -750,7 +750,7 @@ msgstr "" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "" @@ -1334,6 +1334,15 @@ msgstr "" msgid "Polygon needs at least 3 points" msgstr "" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "" @@ -1346,6 +1355,10 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "" +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" diff --git a/locale/de_DE.po b/locale/de_DE.po index 10c07f667..87cca4a77 100644 --- a/locale/de_DE.po +++ b/locale/de_DE.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: 2020-06-16 18:24+0000\n" "Last-Translator: Andreas Buchen <andreas.buchen@gmail.com>\n" "Language: de_DE\n" @@ -760,7 +760,7 @@ msgstr "Fehler in regex" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "Erwartet ein(e) %q" @@ -1362,6 +1362,15 @@ msgstr "und alle Module im Dateisystem \n" msgid "Polygon needs at least 3 points" msgstr "Polygone brauchen mindestens 3 Punkte" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "Der Präfixbuffer muss sich auf dem Heap befinden" @@ -1376,6 +1385,10 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "Pull wird nicht verwendet, wenn die Richtung output ist." +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "PulseOut wird auf diesem Chip nicht unterstützt" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "RNG DeInit-Fehler" @@ -3553,9 +3566,6 @@ msgstr "" #~ msgid "'async for' or 'async with' outside async function" #~ msgstr "'async for' oder 'async with' außerhalb der asynchronen Funktion" -#~ msgid "PulseOut not supported on this chip" -#~ msgstr "PulseOut wird auf diesem Chip nicht unterstützt" - #~ msgid "PulseIn not supported on this chip" #~ msgstr "PulseIn wird auf diesem Chip nicht unterstützt" diff --git a/locale/es.po b/locale/es.po index 5012b749b..882904f64 100644 --- a/locale/es.po +++ b/locale/es.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: 2020-08-17 21:11+0000\n" "Last-Translator: Alvaro Figueroa <alvaro@greencore.co.cr>\n" "Language-Team: \n" @@ -765,7 +765,7 @@ msgstr "Error en regex" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "Se espera un %q" @@ -1362,6 +1362,15 @@ msgstr "Además de cualquier módulo en el sistema de archivos\n" msgid "Polygon needs at least 3 points" msgstr "El polígono necesita al menos 3 puntos" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "El búfer de prefijo debe estar en el montículo" @@ -1375,6 +1384,10 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "Pull no se usa cuando la dirección es output." +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "PulseOut no es compatible con este chip" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "Error de desinicializado del RNG" @@ -3539,9 +3552,6 @@ msgstr "zi debe ser una forma (n_section,2)" #~ msgid "'async for' or 'async with' outside async function" #~ msgstr "'async for' o 'async with' fuera de la función async" -#~ msgid "PulseOut not supported on this chip" -#~ msgstr "PulseOut no es compatible con este chip" - #~ msgid "PulseIn not supported on this chip" #~ msgstr "PulseIn no es compatible con este chip" diff --git a/locale/fil.po b/locale/fil.po index 37a21dc6a..ec4f9f685 100644 --- a/locale/fil.po +++ b/locale/fil.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: 2018-12-20 22:15-0800\n" "Last-Translator: Timothy <me@timothygarcia.ca>\n" "Language-Team: fil\n" @@ -754,7 +754,7 @@ msgstr "May pagkakamali sa REGEX" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "Umasa ng %q" @@ -1346,6 +1346,15 @@ msgstr "Kasama ang kung ano pang modules na sa filesystem\n" msgid "Polygon needs at least 3 points" msgstr "" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "" @@ -1360,6 +1369,10 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "Pull hindi ginagamit kapag ang direksyon ay output." +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" diff --git a/locale/fr.po b/locale/fr.po index 419cef785..0562053f1 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: 0.1\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: 2020-07-27 21:27+0000\n" "Last-Translator: Nathan <bonnemainsnathan@gmail.com>\n" "Language: fr\n" @@ -768,7 +768,7 @@ msgstr "Erreur dans l'expression régulière" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "Attendu un %q" @@ -1369,6 +1369,15 @@ msgstr "Ainsi que tout autre module présent sur le système de fichiers\n" msgid "Polygon needs at least 3 points" msgstr "Polygone a besoin d’au moins 3 points" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "Le tampon de préfixe doit être sur le tas" @@ -1381,6 +1390,10 @@ msgstr "Appuyez sur une touche pour entrer sur REPL ou CTRL-D pour recharger." msgid "Pull not used when direction is output." msgstr "Le tirage 'pull' n'est pas utilisé quand la direction est 'output'." +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "PulseOut non pris en charge sur cette puce" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "Erreur RNG DeInit" @@ -3557,9 +3570,6 @@ msgstr "" #~ msgid "'async for' or 'async with' outside async function" #~ msgstr "'async for' ou 'async with' sans fonction asynchrone extérieure" -#~ msgid "PulseOut not supported on this chip" -#~ msgstr "PulseOut non pris en charge sur cette puce" - #~ msgid "PulseIn not supported on this chip" #~ msgstr "PulseIn non pris en charge sur cette puce" diff --git a/locale/hi.po b/locale/hi.po index 9d0dd74e9..50a1887f6 100644 --- a/locale/hi.po +++ b/locale/hi.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: Automatically generated\n" "Language-Team: none\n" @@ -743,7 +743,7 @@ msgstr "" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "" @@ -1327,6 +1327,15 @@ msgstr "" msgid "Polygon needs at least 3 points" msgstr "" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "" @@ -1339,6 +1348,10 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "" +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" diff --git a/locale/it_IT.po b/locale/it_IT.po index e128b7ef9..9635220af 100644 --- a/locale/it_IT.po +++ b/locale/it_IT.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: 2018-10-02 16:27+0200\n" "Last-Translator: Enrico Paganin <enrico.paganin@mail.com>\n" "Language-Team: \n" @@ -754,7 +754,7 @@ msgstr "Errore nella regex" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "Atteso un %q" @@ -1356,6 +1356,15 @@ msgstr "Imposssibile rimontare il filesystem" msgid "Polygon needs at least 3 points" msgstr "" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "" @@ -1369,6 +1378,10 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "" +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" diff --git a/locale/ja.po b/locale/ja.po index 8385cce1b..7c3b42580 100644 --- a/locale/ja.po +++ b/locale/ja.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: 2020-08-16 13:25+0000\n" "Last-Translator: Taku Fukada <naninunenor@gmail.com>\n" "Language-Team: none\n" @@ -759,7 +759,7 @@ msgstr "正規表現にエラーがあります" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "" @@ -1348,6 +1348,15 @@ msgstr "" msgid "Polygon needs at least 3 points" msgstr "ポリゴンには少なくとも3つの点が必要" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "Prefixバッファはヒープ上になければなりません" @@ -1361,6 +1370,10 @@ msgstr "何らかのキーを押すとREPLに入ります。CTRL-Dでリロー msgid "Pull not used when direction is output." msgstr "方向がoutputのときpullは使われません" +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "乱数生成器の解体エラー" diff --git a/locale/ko.po b/locale/ko.po index e86372bcb..ecf539946 100644 --- a/locale/ko.po +++ b/locale/ko.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: 2019-05-06 14:22-0700\n" "Last-Translator: \n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -746,7 +746,7 @@ msgstr "Regex에 오류가 있습니다." #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "%q 이 예상되었습니다." @@ -1330,6 +1330,15 @@ msgstr "" msgid "Polygon needs at least 3 points" msgstr "" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "" @@ -1342,6 +1351,10 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "" +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" diff --git a/locale/nl.po b/locale/nl.po index b26592f1e..313359668 100644 --- a/locale/nl.po +++ b/locale/nl.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: 2020-08-10 19:59+0000\n" "Last-Translator: _fonzlate <vooralfred@gmail.com>\n" "Language-Team: none\n" @@ -762,7 +762,7 @@ msgstr "Fout in regex" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "Verwacht een %q" @@ -1364,6 +1364,15 @@ msgstr "En iedere module in het bestandssysteem\n" msgid "Polygon needs at least 3 points" msgstr "Polygon heeft op zijn minst 3 punten nodig" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "Prefix buffer moet op de heap zijn" @@ -1378,6 +1387,10 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "Pull niet gebruikt wanneer de richting output is." +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "PulseOut niet ondersteund door deze chip" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "RNG DeInit Fout" @@ -3531,9 +3544,6 @@ msgstr "zi moet vorm (n_section, 2) hebben" #~ msgid "PulseIn not supported on this chip" #~ msgstr "PusleIn niet ondersteund door deze chip" -#~ msgid "PulseOut not supported on this chip" -#~ msgstr "PulseOut niet ondersteund door deze chip" - #~ msgid "I2C operation not supported" #~ msgstr "I2C actie niet ondersteund" diff --git a/locale/pl.po b/locale/pl.po index 8250f840d..6c52062d9 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: 2019-03-19 18:37-0700\n" "Last-Translator: Radomir Dopieralski <circuitpython@sheep.art.pl>\n" "Language-Team: pl\n" @@ -746,7 +746,7 @@ msgstr "Błąd w regex" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "Oczekiwano %q" @@ -1332,6 +1332,15 @@ msgstr "Oraz moduły w systemie plików\n" msgid "Polygon needs at least 3 points" msgstr "" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "" @@ -1344,6 +1353,10 @@ msgstr "Dowolny klawisz aby uruchomić konsolę. CTRL-D aby przeładować." msgid "Pull not used when direction is output." msgstr "Podciągnięcie nieużywane w trybie wyjścia." +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" diff --git a/locale/pt_BR.po b/locale/pt_BR.po index 459b198df..b2967cf99 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: 2020-08-16 02:25+0000\n" "Last-Translator: Wellington Terumi Uemura <wellingtonuemura@gmail.com>\n" "Language-Team: \n" @@ -767,7 +767,7 @@ msgstr "Erro no regex" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "Esperado um" @@ -1367,6 +1367,15 @@ msgstr "Além de quaisquer módulos no sistema de arquivos\n" msgid "Polygon needs at least 3 points" msgstr "O Polígono precisa de pelo menos 3 pontos" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "" @@ -1382,6 +1391,10 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "O Pull não foi usado quando a direção for gerada." +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "O PulseOut não é compatível neste CI" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "Erro DeInit RNG" @@ -3552,9 +3565,6 @@ msgstr "zi deve estar na forma (n_section, 2)" #~ msgid "'async for' or 'async with' outside async function" #~ msgstr "'assíncrono para' ou 'assíncrono com' função assíncrona externa" -#~ msgid "PulseOut not supported on this chip" -#~ msgstr "O PulseOut não é compatível neste CI" - #~ msgid "PulseIn not supported on this chip" #~ msgstr "O PulseIn não é compatível neste CI" diff --git a/locale/sv.po b/locale/sv.po index d747de177..df205b109 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: 2020-07-25 20:58+0000\n" "Last-Translator: Jonny Bergdahl <jonny@bergdahl.it>\n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -758,7 +758,7 @@ msgstr "Fel i regex" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "Förväntade %q" @@ -1355,6 +1355,15 @@ msgstr "Plus eventuella moduler i filsystemet\n" msgid "Polygon needs at least 3 points" msgstr "Polygonen behöver minst 3 punkter" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "Prefixbufferten måste finnas på heap" @@ -1368,6 +1377,10 @@ msgstr "" msgid "Pull not used when direction is output." msgstr "Pull används inte när riktningen är output." +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "PulseIn stöds inte av detta chip" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "RNG DeInit-fel" @@ -3519,9 +3532,6 @@ msgstr "zi måste vara i formen (n_section, 2)" #~ msgid "'async for' or 'async with' outside async function" #~ msgstr "'async for' eller 'async with' utanför async-funktion" -#~ msgid "PulseOut not supported on this chip" -#~ msgstr "PulseIn stöds inte av detta chip" - #~ msgid "PulseIn not supported on this chip" #~ msgstr "PulseIn stöds inte av detta chip" diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index 3e5d21d45..725491f5b 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-14 09:36-0400\n" +"POT-Creation-Date: 2020-08-18 11:19-0400\n" "PO-Revision-Date: 2019-04-13 10:10-0700\n" "Last-Translator: hexthat\n" "Language-Team: Chinese Hanyu Pinyin\n" @@ -755,7 +755,7 @@ msgstr "Zhèngzé biǎodá shì cuòwù" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c -#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c +#: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "Yùqí %q" @@ -1350,6 +1350,15 @@ msgstr "Zài wénjiàn xìtǒng shàng tiānjiā rènhé mókuài\n" msgid "Polygon needs at least 3 points" msgstr "Duōbiānxíng zhìshǎo xūyào 3 diǎn" +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. " +"Construct and pass a PWMOut Carrier instead" +msgstr "" + #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "Qiánzhuì huǎnchōng qū bìxū zài duī shàng" @@ -1362,6 +1371,10 @@ msgstr "Àn xià rènhé jiàn jìnrù REPL. Shǐyòng CTRL-D chóngxīn jiāzà msgid "Pull not used when direction is output." msgstr "Fāngxiàng shūchū shí Pull méiyǒu shǐyòng." +#: ports/stm/ref/pulseout-pre-timeralloc.c +msgid "PulseOut not supported on this chip" +msgstr "" + #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "RNG qǔxiāo chūshǐhuà cuòwù" diff --git a/ports/atmel-samd/Makefile b/ports/atmel-samd/Makefile index 65542354e..30487ae3e 100644 --- a/ports/atmel-samd/Makefile +++ b/ports/atmel-samd/Makefile @@ -103,7 +103,7 @@ ifeq ($(CHIP_FAMILY), same54) PERIPHERALS_CHIP_FAMILY=sam_d5x_e5x OPTIMIZATION_FLAGS ?= -O2 # TinyUSB defines -CFLAGS += -DCFG_TUSB_MCU=OPT_MCU_SAMD51 -DCFG_TUD_MIDI_RX_BUFSIZE=128 -DCFG_TUD_CDC_RX_BUFSIZE=256 -DCFG_TUD_MIDI_TX_BUFSIZE=128 -DCFG_TUD_CDC_TX_BUFSIZE=256 -DCFG_TUD_MSC_BUFSIZE=1024 +CFLAGS += -DCFG_TUSB_MCU=OPT_MCU_SAME5X -DCFG_TUD_MIDI_RX_BUFSIZE=128 -DCFG_TUD_CDC_RX_BUFSIZE=256 -DCFG_TUD_MIDI_TX_BUFSIZE=128 -DCFG_TUD_CDC_TX_BUFSIZE=256 -DCFG_TUD_MSC_BUFSIZE=1024 endif # option to override default optimization level, set in boards/$(BOARD)/mpconfigboard.mk diff --git a/ports/atmel-samd/boards/mini_sam_m4/mpconfigboard.mk b/ports/atmel-samd/boards/mini_sam_m4/mpconfigboard.mk index ae2a1e973..393adf839 100644 --- a/ports/atmel-samd/boards/mini_sam_m4/mpconfigboard.mk +++ b/ports/atmel-samd/boards/mini_sam_m4/mpconfigboard.mk @@ -7,8 +7,8 @@ CHIP_VARIANT = SAMD51G19A CHIP_FAMILY = samd51 QSPI_FLASH_FILESYSTEM = 1 -EXTERNAL_FLASH_DEVICE_COUNT = 1 -EXTERNAL_FLASH_DEVICES = "W25Q16JV_IM" +EXTERNAL_FLASH_DEVICE_COUNT = 2 +EXTERNAL_FLASH_DEVICES = "W25Q16JV_IM, W25Q16JV_IQ" LONGINT_IMPL = MPZ # No I2S on SAMD51G diff --git a/ports/atmel-samd/common-hal/pulseio/PulseOut.c b/ports/atmel-samd/common-hal/pulseio/PulseOut.c index 59714f9b5..3463bb5e2 100644 --- a/ports/atmel-samd/common-hal/pulseio/PulseOut.c +++ b/ports/atmel-samd/common-hal/pulseio/PulseOut.c @@ -96,7 +96,15 @@ void pulseout_reset() { } void common_hal_pulseio_pulseout_construct(pulseio_pulseout_obj_t* self, - const pwmio_pwmout_obj_t* carrier) { + const pwmio_pwmout_obj_t* carrier, + const mcu_pin_obj_t* pin, + uint32_t frequency, + uint16_t duty_cycle) { + if (!carrier || pin || frequency) { + mp_raise_NotImplementedError(translate("Port does not accept pins or frequency. \ + Construct and pass a PWMOut Carrier instead")); + } + if (refcount == 0) { // Find a spare timer. Tc *tc = NULL; diff --git a/ports/atmel-samd/mpconfigport.mk b/ports/atmel-samd/mpconfigport.mk index 3fecf867e..a16daf4b0 100644 --- a/ports/atmel-samd/mpconfigport.mk +++ b/ports/atmel-samd/mpconfigport.mk @@ -91,3 +91,5 @@ endif # samd51 INTERNAL_LIBM = 1 USB_SERIAL_NUMBER_LENGTH = 32 + +USB_NUM_EP = 8 diff --git a/ports/cxd56/common-hal/pulseio/PulseOut.c b/ports/cxd56/common-hal/pulseio/PulseOut.c index a0c77b0a3..764a5860a 100644 --- a/ports/cxd56/common-hal/pulseio/PulseOut.c +++ b/ports/cxd56/common-hal/pulseio/PulseOut.c @@ -58,8 +58,16 @@ static bool pulseout_timer_handler(unsigned int *next_interval_us, void *arg) return true; } -void common_hal_pulseio_pulseout_construct(pulseio_pulseout_obj_t *self, - const pwmio_pwmout_obj_t *carrier) { +void common_hal_pulseio_pulseout_construct(pulseio_pulseout_obj_t* self, + const pwmio_pwmout_obj_t* carrier, + const mcu_pin_obj_t* pin, + uint32_t frequency, + uint16_t duty_cycle) { + if (!carrier || pin || frequency) { + mp_raise_NotImplementedError(translate("Port does not accept pins or frequency. \ + Construct and pass a PWMOut Carrier instead")); + } + if (pulse_fd < 0) { pulse_fd = open("/dev/timer0", O_RDONLY); } diff --git a/ports/cxd56/supervisor/port.c b/ports/cxd56/supervisor/port.c index 94eda66dc..7038ca478 100644 --- a/ports/cxd56/supervisor/port.c +++ b/ports/cxd56/supervisor/port.c @@ -36,6 +36,8 @@ #include "boards/board.h" #include "supervisor/port.h" +#include "supervisor/background_callback.h" +#include "supervisor/usb.h" #include "supervisor/shared/tick.h" #include "common-hal/microcontroller/Pin.h" @@ -116,6 +118,11 @@ uint32_t port_get_saved_word(void) { return _ebss; } +static background_callback_t callback; +static void usb_background_do(void* unused) { + usb_background(); +} + volatile bool _tick_enabled; void board_timerhook(void) { @@ -123,6 +130,8 @@ void board_timerhook(void) if (_tick_enabled) { supervisor_tick(); } + + background_callback_add(&callback, usb_background_do, NULL); } uint64_t port_get_raw_ticks(uint8_t* subticks) { diff --git a/ports/esp32s2/background.c b/ports/esp32s2/background.c index 40ce9ecfd..3160d9974 100644 --- a/ports/esp32s2/background.c +++ b/ports/esp32s2/background.c @@ -35,10 +35,17 @@ #include "shared-module/displayio/__init__.h" #endif +#if CIRCUITPY_PULSEIO +#include "common-hal/pulseio/PulseIn.h" +#endif + void port_background_task(void) { // Zero delay in case FreeRTOS wants to switch to something else. vTaskDelay(0); + #if CIRCUITPY_PULSEIO + pulsein_background(); + #endif } void port_start_background_task(void) {} diff --git a/ports/esp32s2/common-hal/neopixel_write/__init__.c b/ports/esp32s2/common-hal/neopixel_write/__init__.c index 1fc976ec3..193d754f4 100644 --- a/ports/esp32s2/common-hal/neopixel_write/__init__.c +++ b/ports/esp32s2/common-hal/neopixel_write/__init__.c @@ -93,6 +93,9 @@ void common_hal_neopixel_write (const digitalio_digitalinout_obj_t* digitalinout // Reserve channel uint8_t number = digitalinout->pin->number; rmt_channel_t channel = esp32s2_peripherals_find_and_reserve_rmt(); + if (channel == RMT_CHANNEL_MAX) { + mp_raise_RuntimeError(translate("All timers in use")); + } // Configure Channel rmt_config_t config = RMT_DEFAULT_CONFIG_TX(number, channel); diff --git a/ports/esp32s2/common-hal/pulseio/PulseIn.c b/ports/esp32s2/common-hal/pulseio/PulseIn.c index 65fc6631d..f7429ec12 100644 --- a/ports/esp32s2/common-hal/pulseio/PulseIn.c +++ b/ports/esp32s2/common-hal/pulseio/PulseIn.c @@ -25,51 +25,184 @@ */ #include "common-hal/pulseio/PulseIn.h" +#include "shared-bindings/microcontroller/__init__.h" #include "py/runtime.h" -// STATIC void pulsein_handler(uint8_t num) { -// } +STATIC uint8_t refcount = 0; +STATIC pulseio_pulsein_obj_t * handles[RMT_CHANNEL_MAX]; + +// Requires rmt.c void esp32s2_peripherals_reset_all(void) to reset + +STATIC void update_internal_buffer(pulseio_pulsein_obj_t* self) { + uint32_t length = 0; + rmt_item32_t *items = (rmt_item32_t *) xRingbufferReceive(self->buf_handle, &length, 0); + if (items) { + length /= 4; + for (size_t i=0; i < length; i++) { + uint16_t pos = (self->start + self->len) % self->maxlen; + self->buffer[pos] = items[i].duration0 * 3; + // Check if second item exists before incrementing + if (items[i].duration1) { + self->buffer[pos+1] = items[i].duration1 * 3; + if (self->len < (self->maxlen - 1)) { + self->len += 2; + } else { + self->start += 2; + } + } else { + if (self->len < self->maxlen) { + self->len++; + } else { + self->start++; + } + } + } + vRingbufferReturnItem(self->buf_handle, (void *) items); + } +} + +// We can't access the RMT interrupt, so we need a global service to prevent +// the ringbuffer from overflowing and crashing the peripheral +void pulsein_background(void) { + for (size_t i = 0; i < RMT_CHANNEL_MAX; i++) { + if (handles[i]) { + update_internal_buffer(handles[i]); + UBaseType_t items_waiting; + vRingbufferGetInfo(handles[i]->buf_handle, NULL, NULL, NULL, NULL, &items_waiting); + } + } +} void pulsein_reset(void) { + for (size_t i = 0; i < RMT_CHANNEL_MAX; i++) { + handles[i] = NULL; + } + supervisor_disable_tick(); + refcount = 0; } void common_hal_pulseio_pulsein_construct(pulseio_pulsein_obj_t* self, const mcu_pin_obj_t* pin, uint16_t maxlen, bool idle_state) { - mp_raise_NotImplementedError(translate("PulseIn not supported on this chip")); + self->buffer = (uint16_t *) m_malloc(maxlen * sizeof(uint16_t), false); + if (self->buffer == NULL) { + mp_raise_msg_varg(&mp_type_MemoryError, translate("Failed to allocate RX buffer of %d bytes"), maxlen * sizeof(uint16_t)); + } + self->pin = pin; + self->maxlen = maxlen; + self->idle_state = idle_state; + self->start = 0; + self->len = 0; + self->paused = false; + + // Set pull settings + gpio_pullup_dis(pin->number); + gpio_pulldown_dis(pin->number); + if (idle_state) { + gpio_pullup_en(pin->number); + } else { + gpio_pulldown_en(pin->number); + } + + // Find a free RMT Channel and configure it + rmt_channel_t channel = esp32s2_peripherals_find_and_reserve_rmt(); + if (channel == RMT_CHANNEL_MAX) { + mp_raise_RuntimeError(translate("All timers in use")); + } + rmt_config_t config = RMT_DEFAULT_CONFIG_RX(pin->number, channel); + config.rx_config.filter_en = true; + config.rx_config.idle_threshold = 30000; // 30*3=90ms idle required to register a sequence + config.clk_div = 240; // All measurements are divided by 3 to accomodate 65ms pulses + rmt_config(&config); + rmt_driver_install(channel, 1000, 0); //TODO: pick a more specific buffer size? + + // Store this object and the buffer handle for background updates + self->channel = channel; + handles[channel] = self; + rmt_get_ringbuf_handle(channel, &(self->buf_handle)); + + // start RMT RX, and enable ticks so the core doesn't turn off. + rmt_rx_start(channel, true); + supervisor_enable_tick(); + refcount++; } bool common_hal_pulseio_pulsein_deinited(pulseio_pulsein_obj_t* self) { - return false; + return handles[self->channel] ? false : true; } void common_hal_pulseio_pulsein_deinit(pulseio_pulsein_obj_t* self) { + handles[self->channel] = NULL; + esp32s2_peripherals_free_rmt(self->channel); + reset_pin_number(self->pin->number); + refcount--; + if (refcount == 0) { + supervisor_disable_tick(); + } } void common_hal_pulseio_pulsein_pause(pulseio_pulsein_obj_t* self) { + self->paused = true; + rmt_rx_stop(self->channel); } void common_hal_pulseio_pulsein_resume(pulseio_pulsein_obj_t* self, uint16_t trigger_duration) { + // Make sure we're paused. + if ( !self->paused ) { + common_hal_pulseio_pulsein_pause(self); + } + + if (trigger_duration > 0) { + gpio_set_direction(self->pin->number, GPIO_MODE_DEF_OUTPUT); + gpio_set_level(self->pin->number, !self->idle_state); + common_hal_mcu_delay_us((uint32_t)trigger_duration); + gpio_set_level(self->pin->number, self->idle_state); + gpio_set_direction(self->pin->number, GPIO_MODE_INPUT); // should revert to pull direction + } + + self->paused = false; + rmt_rx_start(self->channel, false); } void common_hal_pulseio_pulsein_clear(pulseio_pulsein_obj_t* self) { + // Buffer only updates in BG tasks or fetches, so no extra protection is needed + self->start = 0; + self->len = 0; } uint16_t common_hal_pulseio_pulsein_get_item(pulseio_pulsein_obj_t* self, int16_t index) { - return false; + update_internal_buffer(self); + if (index < 0) { + index += self->len; + } + if (index < 0 || index >= self->len) { + mp_raise_IndexError(translate("index out of range")); + } + uint16_t value = self->buffer[(self->start + index) % self->maxlen]; + return value; } uint16_t common_hal_pulseio_pulsein_popleft(pulseio_pulsein_obj_t* self) { - return false; + update_internal_buffer(self); + + if (self->len == 0) { + mp_raise_IndexError(translate("pop from an empty PulseIn")); + } + + uint16_t value = self->buffer[self->start]; + self->start = (self->start + 1) % self->maxlen; + self->len--; + + return value; } uint16_t common_hal_pulseio_pulsein_get_maxlen(pulseio_pulsein_obj_t* self) { - return false; + return self->maxlen; } bool common_hal_pulseio_pulsein_get_paused(pulseio_pulsein_obj_t* self) { - return false; + return self->paused; } uint16_t common_hal_pulseio_pulsein_get_len(pulseio_pulsein_obj_t* self) { - return false; + return self->len; } diff --git a/ports/esp32s2/common-hal/pulseio/PulseIn.h b/ports/esp32s2/common-hal/pulseio/PulseIn.h index b317c516c..97d70d4b0 100644 --- a/ports/esp32s2/common-hal/pulseio/PulseIn.h +++ b/ports/esp32s2/common-hal/pulseio/PulseIn.h @@ -30,24 +30,27 @@ #include "common-hal/microcontroller/Pin.h" #include "py/obj.h" +#include "driver/rmt.h" +#include "rmt.h" typedef struct { mp_obj_base_t base; const mcu_pin_obj_t* pin; + rmt_channel_t channel; bool idle_state; bool paused; - volatile bool first_edge; + + RingbufHandle_t buf_handle; uint16_t* buffer; uint16_t maxlen; volatile uint16_t start; volatile uint16_t len; - volatile uint32_t last_overflow; - volatile uint16_t last_count; } pulseio_pulsein_obj_t; void pulsein_reset(void); +void pulsein_background(void); #endif // MICROPY_INCLUDED_ESP32S2_COMMON_HAL_PULSEIO_PULSEIN_H diff --git a/ports/esp32s2/common-hal/pulseio/PulseOut.c b/ports/esp32s2/common-hal/pulseio/PulseOut.c index 15eab83dd..cfe750732 100644 --- a/ports/esp32s2/common-hal/pulseio/PulseOut.c +++ b/ports/esp32s2/common-hal/pulseio/PulseOut.c @@ -29,32 +29,63 @@ #include "shared-bindings/pwmio/PWMOut.h" #include "py/runtime.h" -// STATIC void turn_on(pulseio_pulseout_obj_t *pulseout) { -// } +// Requires rmt.c void esp32s2_peripherals_reset_all(void) to reset -// STATIC void turn_off(pulseio_pulseout_obj_t *pulseout) { -// } +void common_hal_pulseio_pulseout_construct(pulseio_pulseout_obj_t* self, + const pwmio_pwmout_obj_t* carrier, + const mcu_pin_obj_t* pin, + uint32_t frequency, + uint16_t duty_cycle) { + if (carrier || !pin || !frequency) { + mp_raise_NotImplementedError(translate("Port does not accept PWM carrier. \ + Pass a pin, frequency and duty cycle instead")); + } -// STATIC void start_timer(void) { -// } + rmt_channel_t channel = esp32s2_peripherals_find_and_reserve_rmt(); + if (channel == RMT_CHANNEL_MAX) { + mp_raise_RuntimeError(translate("All timers in use")); + } -// STATIC void pulseout_event_handler(void) { -// } + // Configure Channel + rmt_config_t config = RMT_DEFAULT_CONFIG_TX(pin->number, channel); + config.tx_config.carrier_en = true; + config.tx_config.carrier_duty_percent = (duty_cycle * 100) / (1<<16); + config.tx_config.carrier_freq_hz = frequency; + config.clk_div = 80; -void pulseout_reset() { -} + rmt_config(&config); + rmt_driver_install(channel, 0, 0); -void common_hal_pulseio_pulseout_construct(pulseio_pulseout_obj_t* self, - const pwmio_pwmout_obj_t* carrier) { - mp_raise_NotImplementedError(translate("PulseOut not supported on this chip")); + self->channel = channel; } bool common_hal_pulseio_pulseout_deinited(pulseio_pulseout_obj_t* self) { - return false; + return (self->channel == RMT_CHANNEL_MAX); } void common_hal_pulseio_pulseout_deinit(pulseio_pulseout_obj_t* self) { + esp32s2_peripherals_free_rmt(self->channel); + self->channel = RMT_CHANNEL_MAX; + } void common_hal_pulseio_pulseout_send(pulseio_pulseout_obj_t* self, uint16_t* pulses, uint16_t length) { + rmt_item32_t items[length]; + + // Circuitpython allows 16 bit pulse values, while ESP32 only allows 15 bits + // Thus, we use entire items for one pulse, rather than switching inside each item + for (size_t i = 0; i < length; i++) { + // Setting the RMT duration to 0 has undefined behavior, so avoid that pre-emptively. + if (pulses[i] == 0) { + pulses[i] = 1; + } + uint32_t level = (i % 2) ? 0 : 1; + const rmt_item32_t item = {{{ (pulses[i] & 0x8000 ? 0x7FFF : 1), level, (pulses[i] & 0x7FFF), level}}}; + items[i] = item; + } + + rmt_write_items(self->channel, items, length, true); + while (rmt_wait_tx_done(self->channel, 0) != ESP_OK) { + RUN_BACKGROUND_TASKS; + } } diff --git a/ports/esp32s2/common-hal/pulseio/PulseOut.h b/ports/esp32s2/common-hal/pulseio/PulseOut.h index e58bb0457..629591af6 100644 --- a/ports/esp32s2/common-hal/pulseio/PulseOut.h +++ b/ports/esp32s2/common-hal/pulseio/PulseOut.h @@ -28,15 +28,14 @@ #define MICROPY_INCLUDED_ESP32S2_COMMON_HAL_PULSEIO_PULSEOUT_H #include "common-hal/microcontroller/Pin.h" -#include "common-hal/pwmio/PWMOut.h" +#include "driver/rmt.h" +#include "rmt.h" #include "py/obj.h" typedef struct { mp_obj_base_t base; - pwmio_pwmout_obj_t *pwmout; + rmt_channel_t channel; } pulseio_pulseout_obj_t; -void pulseout_reset(void); - #endif // MICROPY_INCLUDED_ESP32S2_COMMON_HAL_PULSEIO_PULSEOUT_H diff --git a/ports/esp32s2/mpconfigport.h b/ports/esp32s2/mpconfigport.h index d340bb480..07f83434a 100644 --- a/ports/esp32s2/mpconfigport.h +++ b/ports/esp32s2/mpconfigport.h @@ -28,19 +28,18 @@ #ifndef ESP32S2_MPCONFIGPORT_H__ #define ESP32S2_MPCONFIGPORT_H__ -#define CIRCUITPY_INTERNAL_NVM_SIZE (0) -#define MICROPY_NLR_THUMB (0) +#define CIRCUITPY_INTERNAL_NVM_SIZE (0) +#define MICROPY_NLR_THUMB (0) -#define MICROPY_PY_UJSON (0) -#define MICROPY_USE_INTERNAL_PRINTF (0) +#define MICROPY_PY_UJSON (0) +#define MICROPY_USE_INTERNAL_PRINTF (0) #include "py/circuitpy_mpconfig.h" - #define MICROPY_PORT_ROOT_POINTERS \ CIRCUITPY_COMMON_ROOT_POINTERS -#define MICROPY_NLR_SETJMP (1) -#define CIRCUITPY_DEFAULT_STACK_SIZE 0x6000 +#define MICROPY_NLR_SETJMP (1) +#define CIRCUITPY_DEFAULT_STACK_SIZE (0x6000) #endif // __INCLUDED_ESP32S2_MPCONFIGPORT_H diff --git a/ports/esp32s2/peripherals/rmt.c b/ports/esp32s2/peripherals/rmt.c index f17957c1c..b7629dbd5 100644 --- a/ports/esp32s2/peripherals/rmt.c +++ b/ports/esp32s2/peripherals/rmt.c @@ -29,6 +29,14 @@ bool rmt_reserved_channels[RMT_CHANNEL_MAX]; +void esp32s2_peripherals_rmt_reset(void) { + for (size_t i = 0; i < RMT_CHANNEL_MAX; i++) { + if (rmt_reserved_channels[i]) { + esp32s2_peripherals_free_rmt(i); + } + } +} + rmt_channel_t esp32s2_peripherals_find_and_reserve_rmt(void) { for (size_t i = 0; i < RMT_CHANNEL_MAX; i++) { if (!rmt_reserved_channels[i]) { @@ -36,8 +44,8 @@ rmt_channel_t esp32s2_peripherals_find_and_reserve_rmt(void) { return i; } } - mp_raise_RuntimeError(translate("All timers in use")); - return false; + // Returning the max indicates a reservation failure. + return RMT_CHANNEL_MAX; } void esp32s2_peripherals_free_rmt(rmt_channel_t chan) { diff --git a/ports/esp32s2/peripherals/rmt.h b/ports/esp32s2/peripherals/rmt.h index 4741a5bc5..01ed09907 100644 --- a/ports/esp32s2/peripherals/rmt.h +++ b/ports/esp32s2/peripherals/rmt.h @@ -31,6 +31,7 @@ #include "driver/rmt.h" #include <stdint.h> +void esp32s2_peripherals_rmt_reset(void); rmt_channel_t esp32s2_peripherals_find_and_reserve_rmt(void); void esp32s2_peripherals_free_rmt(rmt_channel_t chan); diff --git a/ports/esp32s2/supervisor/port.c b/ports/esp32s2/supervisor/port.c index 2f430c7e3..03caed92e 100644 --- a/ports/esp32s2/supervisor/port.c +++ b/ports/esp32s2/supervisor/port.c @@ -38,10 +38,13 @@ #include "common-hal/busio/I2C.h" #include "common-hal/busio/SPI.h" #include "common-hal/busio/UART.h" +#include "common-hal/pulseio/PulseIn.h" #include "common-hal/pwmio/PWMOut.h" #include "supervisor/memory.h" #include "supervisor/shared/tick.h" +#include "rmt.h" + STATIC esp_timer_handle_t _tick_timer; void tick_timer_cb(void* arg) { @@ -65,9 +68,15 @@ void reset_port(void) { // A larger delay so the idle task can run and do any IDF cleanup needed. vTaskDelay(4); +#if CIRCUITPY_PULSEIO + esp32s2_peripherals_rmt_reset(); + pulsein_reset(); +#endif + #if CIRCUITPY_PWMIO pwmout_reset(); #endif + #if CIRCUITPY_BUSIO i2c_reset(); spi_reset(); diff --git a/ports/mimxrt10xx/common-hal/pulseio/PulseOut.c b/ports/mimxrt10xx/common-hal/pulseio/PulseOut.c index 2c27847ed..d3a1a897f 100644 --- a/ports/mimxrt10xx/common-hal/pulseio/PulseOut.c +++ b/ports/mimxrt10xx/common-hal/pulseio/PulseOut.c @@ -94,7 +94,10 @@ void pulseout_reset() { } void common_hal_pulseio_pulseout_construct(pulseio_pulseout_obj_t* self, - const pwmio_pwmout_obj_t* carrier) { + const pwmio_pwmout_obj_t* carrier, + const mcu_pin_obj_t* pin, + uint32_t frequency, + uint16_t duty_cycle) { // if (refcount == 0) { // // Find a spare timer. // Tc *tc = NULL; diff --git a/ports/nrf/boards/simmel/mpconfigboard.h b/ports/nrf/boards/simmel/mpconfigboard.h index 2380a8055..a89f540b0 100644 --- a/ports/nrf/boards/simmel/mpconfigboard.h +++ b/ports/nrf/boards/simmel/mpconfigboard.h @@ -45,6 +45,9 @@ #define BOOTLOADER_SIZE (0x4000) // 12 kiB #define CIRCUITPY_BLE_CONFIG_SIZE (12*1024) +#define DEFAULT_I2C_BUS_SCL (&pin_P0_08) +#define DEFAULT_I2C_BUS_SDA (&pin_P1_09) + // Reduce nRF SoftRadio memory usage #define BLEIO_VS_UUID_COUNT 10 #define BLEIO_HVN_TX_QUEUE_SIZE 2 diff --git a/ports/nrf/boards/simmel/pins.c b/ports/nrf/boards/simmel/pins.c index 6c572cae2..e9710967b 100644 --- a/ports/nrf/boards/simmel/pins.c +++ b/ports/nrf/boards/simmel/pins.c @@ -9,19 +9,15 @@ STATIC const mp_rom_map_elem_t board_module_globals_table[] = { { MP_ROM_QSTR(MP_QSTR_NFC1), MP_ROM_PTR(&pin_P0_09) }, { MP_ROM_QSTR(MP_QSTR_NFC2), MP_ROM_PTR(&pin_P0_10) }, - { MP_ROM_QSTR(MP_QSTR_I2S_LRCK), MP_ROM_PTR(&pin_P0_08) }, - { MP_ROM_QSTR(MP_QSTR_I2S_SDIN), MP_ROM_PTR(&pin_P1_09) }, - { MP_ROM_QSTR(MP_QSTR_I2S_SCK), MP_ROM_PTR(&pin_P0_12) }, - { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_P0_06) }, - { MP_ROM_QSTR(MP_QSTR_CHG), MP_ROM_PTR(&pin_P0_04) }, - { MP_ROM_QSTR(MP_QSTR_PWM), MP_ROM_PTR(&pin_P0_02) }, - { MP_ROM_QSTR(MP_QSTR_PWM_N), MP_ROM_PTR(&pin_P0_19) }, + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_P0_08) }, + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_P1_09) }, { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, + }; MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table); diff --git a/ports/nrf/common-hal/pulseio/PulseOut.c b/ports/nrf/common-hal/pulseio/PulseOut.c index 16e383caf..9f301a730 100644 --- a/ports/nrf/common-hal/pulseio/PulseOut.c +++ b/ports/nrf/common-hal/pulseio/PulseOut.c @@ -100,7 +100,15 @@ void pulseout_reset() { } void common_hal_pulseio_pulseout_construct(pulseio_pulseout_obj_t* self, - const pwmio_pwmout_obj_t* carrier) { + const pwmio_pwmout_obj_t* carrier, + const mcu_pin_obj_t* pin, + uint32_t frequency, + uint16_t duty_cycle) { + if (!carrier || pin || frequency) { + mp_raise_NotImplementedError(translate("Port does not accept pins or frequency. \ + Construct and pass a PWMOut Carrier instead")); + } + if (refcount == 0) { timer = nrf_peripherals_allocate_timer_or_throw(); } diff --git a/ports/stm/common-hal/pulseio/PulseOut.c b/ports/stm/common-hal/pulseio/PulseOut.c index fb48561d8..3bf23ad14 100644 --- a/ports/stm/common-hal/pulseio/PulseOut.c +++ b/ports/stm/common-hal/pulseio/PulseOut.c @@ -113,7 +113,15 @@ void pulseout_reset() { } void common_hal_pulseio_pulseout_construct(pulseio_pulseout_obj_t* self, - const pwmio_pwmout_obj_t* carrier) { + const pwmio_pwmout_obj_t* carrier, + const mcu_pin_obj_t* pin, + uint32_t frequency, + uint16_t duty_cycle) { + if (!carrier || pin || frequency) { + mp_raise_NotImplementedError(translate("Port does not accept pins or frequency. \ + Construct and pass a PWMOut Carrier instead")); + } + // Add to active PulseOuts refcount++; TIM_TypeDef * tim_instance = stm_peripherals_find_timer(); diff --git a/shared-bindings/pulseio/PulseOut.c b/shared-bindings/pulseio/PulseOut.c index 024ee613c..2b787df4f 100644 --- a/shared-bindings/pulseio/PulseOut.c +++ b/shared-bindings/pulseio/PulseOut.c @@ -65,20 +65,28 @@ //| pulse.send(pulses)""" //| ... //| -STATIC mp_obj_t pulseio_pulseout_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { - mp_arg_check_num(n_args, kw_args, 1, 1, false); - mp_obj_t carrier_obj = args[0]; - - if (!MP_OBJ_IS_TYPE(carrier_obj, &pwmio_pwmout_type)) { - mp_raise_TypeError_varg(translate("Expected a %q"), pwmio_pwmout_type.name); - } - - // create Pulse object from the given pin +STATIC mp_obj_t pulseio_pulseout_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) { pulseio_pulseout_obj_t *self = m_new_obj(pulseio_pulseout_obj_t); self->base.type = &pulseio_pulseout_type; - common_hal_pulseio_pulseout_construct(self, (pwmio_pwmout_obj_t *)MP_OBJ_TO_PTR(carrier_obj)); - + mp_obj_t carrier_obj = pos_args[0]; + if (MP_OBJ_IS_TYPE(carrier_obj, &pwmio_pwmout_type)) { + // Use a PWMOut Carrier + mp_arg_check_num(n_args, kw_args, 1, 1, false); + common_hal_pulseio_pulseout_construct(self, (pwmio_pwmout_obj_t *)MP_OBJ_TO_PTR(carrier_obj), NULL, 0, 0); + } else { + // Use a Pin, frequency, and duty cycle + enum { ARG_pin, ARG_frequency}; + static const mp_arg_t allowed_args[] = { + { MP_QSTR_pin, MP_ARG_REQUIRED | MP_ARG_OBJ }, + { MP_QSTR_frequency, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 38000} }, + { MP_QSTR_duty_cycle, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 1<<15} }, + }; + mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)]; + mp_arg_parse_all(n_args, pos_args, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); + const mcu_pin_obj_t* pin = validate_obj_is_free_pin(args[ARG_pin].u_obj); + common_hal_pulseio_pulseout_construct(self, NULL, pin, args[ARG_frequency].u_int, args[ARG_frequency].u_int); + } return MP_OBJ_FROM_PTR(self); } diff --git a/shared-bindings/pulseio/PulseOut.h b/shared-bindings/pulseio/PulseOut.h index 80dd0e92f..49dc555fe 100644 --- a/shared-bindings/pulseio/PulseOut.h +++ b/shared-bindings/pulseio/PulseOut.h @@ -34,7 +34,11 @@ extern const mp_obj_type_t pulseio_pulseout_type; extern void common_hal_pulseio_pulseout_construct(pulseio_pulseout_obj_t* self, - const pwmio_pwmout_obj_t* carrier); + const pwmio_pwmout_obj_t* carrier, + const mcu_pin_obj_t* pin, + uint32_t frequency, + uint16_t duty_cycle); + extern void common_hal_pulseio_pulseout_deinit(pulseio_pulseout_obj_t* self); extern bool common_hal_pulseio_pulseout_deinited(pulseio_pulseout_obj_t* self); extern void common_hal_pulseio_pulseout_send(pulseio_pulseout_obj_t* self, diff --git a/supervisor/supervisor.mk b/supervisor/supervisor.mk index 25b240036..c876a11cc 100644 --- a/supervisor/supervisor.mk +++ b/supervisor/supervisor.mk @@ -171,6 +171,10 @@ ifndef USB_MIDI_EP_NUM_IN USB_MIDI_EP_NUM_IN = 0 endif +ifndef USB_NUM_EP +USB_NUM_EP = 0 +endif + USB_DESCRIPTOR_ARGS = \ --manufacturer $(USB_MANUFACTURER)\ --product $(USB_PRODUCT)\ @@ -180,6 +184,7 @@ USB_DESCRIPTOR_ARGS = \ --interface_name $(USB_INTERFACE_NAME)\ --devices $(USB_DEVICES)\ --hid_devices $(USB_HID_DEVICES)\ + --max_ep $(USB_NUM_EP) \ --cdc_ep_num_notification $(USB_CDC_EP_NUM_NOTIFICATION)\ --cdc_ep_num_data_out $(USB_CDC_EP_NUM_DATA_OUT)\ --cdc_ep_num_data_in $(USB_CDC_EP_NUM_DATA_IN)\ diff --git a/tools/gen_display_resources.py b/tools/gen_display_resources.py index e4197aabf..6657b6a27 100644 --- a/tools/gen_display_resources.py +++ b/tools/gen_display_resources.py @@ -58,15 +58,20 @@ filtered_characters = all_characters # Try to pre-load all of the glyphs. Misses will still be slow later. f.load_glyphs(set(ord(c) for c in all_characters)) +missing = 0 # Get each glyph. for c in set(all_characters): if ord(c) not in f._glyphs: + missing += 1 filtered_characters = filtered_characters.replace(c, "") continue g = f.get_glyph(ord(c)) if g["shift"][1] != 0: raise RuntimeError("y shift") +if missing > 0: + print("Font missing", missing, "characters", file=sys.stderr) + x, y, dx, dy = f.get_bounding_box() tile_x, tile_y = x - dx, y - dy total_bits = tile_x * len(all_characters) diff --git a/tools/gen_usb_descriptor.py b/tools/gen_usb_descriptor.py index fb91fd334..baee8cad7 100644 --- a/tools/gen_usb_descriptor.py +++ b/tools/gen_usb_descriptor.py @@ -62,6 +62,8 @@ parser.add_argument('--midi_ep_num_out', type=int, default=0, help='endpoint number of MIDI OUT') parser.add_argument('--midi_ep_num_in', type=int, default=0, help='endpoint number of MIDI IN') +parser.add_argument('--max_ep', type=int, default=0, + help='total number of endpoints available') parser.add_argument('--output_c_file', type=argparse.FileType('w', encoding='UTF-8'), required=True) parser.add_argument('--output_h_file', type=argparse.FileType('w', encoding='UTF-8'), required=True) @@ -376,6 +378,15 @@ if 'AUDIO' in args.devices: # interface cross-references. interfaces = util.join_interfaces(interfaces_to_join, renumber_endpoints=args.renumber_endpoints) +if args.max_ep != 0: + for interface in interfaces: + for subdescriptor in interface.subdescriptors: + endpoint_address = getattr(subdescriptor, 'bEndpointAddress', 0) & 0x7f + if endpoint_address > args.max_ep: + raise ValueError("Endpoint address %d of %s may not exceed %d" % (endpoint_address & 0x7f, interface.description, args.max_ep)) +else: + print("Unable to check whether maximum number of endpoints is respected", file=sys.stderr) + # Now adjust the CDC interface cross-references. cdc_union.bMasterInterface = cdc_comm_interface.bInterfaceNumber |