diff options
38 files changed, 1551 insertions, 1125 deletions
diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index dc3dc6835..eaecd2fa4 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -28,7 +28,7 @@ jobs: - name: CircuitPython version run: | git describe --dirty --tags - echo "::set-env name=CP_VERSION::$(git describe --dirty --tags)" + echo >>$GITHUB_ENV CP_VERSION=$(git describe --dirty --tags) - name: Set up Python 3.8 uses: actions/setup-python@v1 with: @@ -132,7 +132,7 @@ jobs: - name: Install dependencies run: | brew install gettext awscli - echo "::set-env name=PATH::/usr/local/opt/gettext/bin:$PATH" + echo >>$GITHUB_PATH /usr/local/opt/gettext/bin - name: Versions run: | gcc --version @@ -146,7 +146,7 @@ jobs: - name: CircuitPython version run: | git describe --dirty --tags - echo "::set-env name=CP_VERSION::$(git describe --dirty --tags)" + echo >>$GITHUB_ENV CP_VERSION=$(git describe --dirty --tags) - name: Build mpy-cross run: make -C mpy-cross -j2 - uses: actions/upload-artifact@v2 @@ -243,6 +243,7 @@ jobs: - "metro_m0_express" - "metro_m4_airlift_lite" - "metro_m4_express" + - "metro_m7_1011" - "metro_nrf52840_express" - "mini_sam_m4" - "monster_m4sk" diff --git a/.github/workflows/pre-commit.yml b/.github/workflows/pre-commit.yml index 966310304..eac9bfe09 100644 --- a/.github/workflows/pre-commit.yml +++ b/.github/workflows/pre-commit.yml @@ -16,7 +16,7 @@ jobs: - uses: actions/checkout@v1 - uses: actions/setup-python@v1 - name: set PY - run: echo "::set-env name=PY::$(python -c 'import hashlib, sys;print(hashlib.sha256(sys.version.encode()+sys.executable.encode()).hexdigest())')" + run: echo >>$GITHUB_ENV PY="$(python -c 'import hashlib, sys;print(hashlib.sha256(sys.version.encode()+sys.executable.encode()).hexdigest())')" - uses: actions/cache@v1 with: path: ~/.cache/pre-commit diff --git a/devices/ble_hci/common-hal/_bleio/__init__.c b/devices/ble_hci/common-hal/_bleio/__init__.c index 9fc4b480d..8d6d76415 100644 --- a/devices/ble_hci/common-hal/_bleio/__init__.c +++ b/devices/ble_hci/common-hal/_bleio/__init__.c @@ -98,7 +98,7 @@ bleio_adapter_obj_t *common_hal_bleio_allocate_adapter_or_raise(void) { void common_hal_bleio_check_connected(uint16_t conn_handle) { if (conn_handle == BLE_CONN_HANDLE_INVALID) { - mp_raise_bleio_ConnectionError(translate("Not connected")); + mp_raise_ConnectionError(translate("Not connected")); } } diff --git a/extmod/vfs_fat_diskio.c b/extmod/vfs_fat_diskio.c index ac8924394..432c03b7c 100644 --- a/extmod/vfs_fat_diskio.c +++ b/extmod/vfs_fat_diskio.c @@ -123,7 +123,7 @@ DRESULT disk_write ( DRESULT disk_ioctl ( bdev_t pdrv, /* Physical drive nmuber (0..) */ - BYTE cmd, /* Control code */ + BYTE cmd, /* Control code */ void *buff /* Buffer to send/receive control data */ ) { @@ -133,7 +133,7 @@ DRESULT disk_ioctl ( } // First part: call the relevant method of the underlying block device - mp_obj_t ret = mp_const_none; + mp_int_t out_value = 0; if (vfs->flags & FSUSER_HAVE_IOCTL) { // new protocol with ioctl static const uint8_t op_map[8] = { @@ -144,9 +144,19 @@ DRESULT disk_ioctl ( }; uint8_t bp_op = op_map[cmd & 7]; if (bp_op != 0) { - vfs->u.ioctl[2] = MP_OBJ_NEW_SMALL_INT(bp_op); - vfs->u.ioctl[3] = MP_OBJ_NEW_SMALL_INT(0); // unused - ret = mp_call_method_n_kw(2, 0, vfs->u.ioctl); + if (vfs->flags & FSUSER_NATIVE) { + bool (*f)(size_t, mp_int_t*) = (void*)(uintptr_t)vfs->u.ioctl[2]; + if (!f(bp_op, (mp_int_t*) &out_value)) { + return RES_ERROR; + } + } else { + vfs->u.ioctl[2] = MP_OBJ_NEW_SMALL_INT(bp_op); + vfs->u.ioctl[3] = MP_OBJ_NEW_SMALL_INT(0); // unused + mp_obj_t ret = mp_call_method_n_kw(2, 0, vfs->u.ioctl); + if (ret != mp_const_none) { + out_value = mp_obj_get_int(ret); + } + } } } else { // old protocol with sync and count @@ -157,10 +167,13 @@ DRESULT disk_ioctl ( } break; - case GET_SECTOR_COUNT: - ret = mp_call_method_n_kw(0, 0, vfs->u.old.count); + case GET_SECTOR_COUNT: { + mp_obj_t ret = mp_call_method_n_kw(0, 0, vfs->u.old.count); + if (ret != mp_const_none) { + out_value = mp_obj_get_int(ret); + } break; - + } case GET_SECTOR_SIZE: // old protocol has fixed sector size of 512 bytes break; @@ -177,16 +190,16 @@ DRESULT disk_ioctl ( return RES_OK; case GET_SECTOR_COUNT: { - *((DWORD*)buff) = mp_obj_get_int(ret); + *((DWORD*)buff) = out_value; return RES_OK; } case GET_SECTOR_SIZE: { - if (ret == mp_const_none) { + if (out_value == 0) { // Default sector size *((WORD*)buff) = 512; } else { - *((WORD*)buff) = mp_obj_get_int(ret); + *((WORD*)buff) = out_value; } #if _MAX_SS != _MIN_SS // need to store ssize because we use it in disk_read/disk_write @@ -202,7 +215,7 @@ DRESULT disk_ioctl ( case IOCTL_INIT: case IOCTL_STATUS: { DSTATUS stat; - if (ret != mp_const_none && MP_OBJ_SMALL_INT_VALUE(ret) != 0) { + if (out_value != 0) { // error initialising stat = STA_NOINIT; } else if (vfs->writeblocks[0] == MP_OBJ_NULL) { diff --git a/locale/ID.po b/locale/ID.po index f6cd07a8c..2ad8acd9b 100644 --- a/locale/ID.po +++ b/locale/ID.po @@ -6,7 +6,7 @@ msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-09-29 20:14-0500\n" -"PO-Revision-Date: 2020-07-06 18:10+0000\n" +"PO-Revision-Date: 2020-10-08 16:22+0000\n" "Last-Translator: oon arfiandwi <oon.arfiandwi@gmail.com>\n" "Language-Team: LANGUAGE <LL@li.org>\n" "Language: ID\n" @@ -14,7 +14,7 @@ msgstr "" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Weblate 4.2-dev\n" +"X-Generator: Weblate 4.3-dev\n" #: main.c msgid "" @@ -1218,32 +1218,32 @@ msgstr "Kesalahan fatal MicroPython." #: shared-bindings/audiobusio/PDMIn.c msgid "Microphone startup delay must be in range 0.0 to 1.0" -msgstr "" +msgstr "Penundaan mulai mikrofon harus dalam kisaran 0,0 hingga 1,0" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c msgid "Missing MISO or MOSI Pin" -msgstr "" +msgstr "Tidak menemukan Pin MISO atau MOSI" #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." -msgstr "" +msgstr "Harus berupa subclass %q." #: ports/mimxrt10xx/common-hal/busio/SPI.c shared-bindings/busio/SPI.c msgid "Must provide MISO or MOSI pin" -msgstr "" +msgstr "Harus menyediakan pin MISO atau MOSI" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "Must use a multiple of 6 rgb pins, not %d" -msgstr "" +msgstr "Harus menggunakan kelipatan 6 pin rgb, bukan %d" #: py/parse.c msgid "Name too long" -msgstr "" +msgstr "Nama terlalu panjang" #: ports/nrf/common-hal/_bleio/Characteristic.c msgid "No CCCD for this Characteristic" -msgstr "" +msgstr "Tidak ada CCCD untuk Karakteristik ini" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c @@ -1258,12 +1258,12 @@ msgstr "tidak ada channel DMA ditemukan" #: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/stm/common-hal/busio/SPI.c msgid "No MISO Pin" -msgstr "" +msgstr "Tidak ada Pin MISO" #: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/stm/common-hal/busio/SPI.c msgid "No MOSI Pin" -msgstr "" +msgstr "Tidak ada Pin MOSI" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c @@ -1281,11 +1281,11 @@ msgstr "Tidak ada pin TX" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c msgid "No available clocks" -msgstr "" +msgstr "Tidak ada clocks yang tersedia" #: shared-bindings/_bleio/PacketBuffer.c msgid "No connection: length cannot be determined" -msgstr "" +msgstr "Tidak ada koneksi: panjang tidak dapat ditentukan" #: shared-bindings/board/__init__.c msgid "No default %q bus" @@ -1297,11 +1297,11 @@ msgstr "Tidak ada GCLK yang kosong" #: shared-bindings/os/__init__.c msgid "No hardware random available" -msgstr "" +msgstr "Tidak ada perangkat keras acak yang tersedia" #: ports/atmel-samd/common-hal/ps2io/Ps2.c msgid "No hardware support on clk pin" -msgstr "" +msgstr "Tidak ada dukungan perangkat keras pada pin clk" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c @@ -1310,11 +1310,11 @@ msgstr "Tidak ada dukungan hardware untuk pin" #: shared-bindings/aesio/aes.c msgid "No key was specified" -msgstr "" +msgstr "Tidak ada kunci yang ditentukan" #: shared-bindings/time/__init__.c msgid "No long integer support" -msgstr "" +msgstr "Tidak ada dukungan bilangan bulat yang panjang" #: ports/esp32s2/common-hal/pwmio/PWMOut.c msgid "No more channels available" @@ -1326,7 +1326,7 @@ msgstr "" #: ports/stm/common-hal/pwmio/PWMOut.c msgid "No more timers available on this pin." -msgstr "" +msgstr "Tidak ada lagi penghitung waktu yang tersedia pada pin ini." #: shared-bindings/wifi/Radio.c msgid "No network with that ssid" @@ -1334,23 +1334,23 @@ msgstr "" #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" -msgstr "" +msgstr "Tidak ada pull-down pada pin; 1Mohm direkomendasikan" #: py/moduerrno.c msgid "No space left on device" -msgstr "" +msgstr "Tidak ada ruang yang tersisa di perangkat" #: py/moduerrno.c msgid "No such file/directory" -msgstr "" +msgstr "Tidak ada file/direktori" #: shared-module/rgbmatrix/RGBMatrix.c msgid "No timer available" -msgstr "" +msgstr "Penghitung waktu tidak tersedia" #: supervisor/shared/safe_mode.c msgid "Nordic Soft Device failure assertion." -msgstr "" +msgstr "Pernyataan kegagalan Perangkat Lunak Nordic." #: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c msgid "Not a valid IP string" @@ -1365,7 +1365,7 @@ msgstr "Tidak dapat menyambungkan ke AP" #: shared-bindings/audiobusio/I2SOut.c shared-bindings/audioio/AudioOut.c #: shared-bindings/audiopwmio/PWMAudioOut.c msgid "Not playing" -msgstr "" +msgstr "Tidak berfungsi" #: main.c msgid "Not running saved code.\n" @@ -1379,6 +1379,7 @@ msgstr "" msgid "" "Object has been deinitialized and can no longer be used. Create a new object." msgstr "" +"Objek telah dideinisialisasi dan tidak dapat lagi digunakan. Buat objek baru." #: ports/nrf/common-hal/busio/UART.c msgid "Odd parity is not supported" @@ -1401,6 +1402,8 @@ msgstr "" msgid "" "Only Windows format, uncompressed BMP supported: given header size is %d" msgstr "" +"Hanya format Windows, mendukung BMP tidak dikompresi: ukuran header yang " +"diberikan adalah %d" #: shared-module/displayio/OnDiskBitmap.c #, c-format @@ -1408,6 +1411,8 @@ msgid "" "Only monochrome, indexed 4bpp or 8bpp, and 16bpp or greater BMPs supported: " "%d bpp given" msgstr "" +"Hanya monokrom, 4bpp atau 8bpp yang diindeks, dan 16bpp atau lebih yang " +"didukung: %d bpp diberikan" #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" @@ -1419,27 +1424,29 @@ msgstr "" #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." -msgstr "" +msgstr "Sampel berlebihan harus kelipatan 8." #: shared-bindings/pwmio/PWMOut.c msgid "" "PWM duty_cycle must be between 0 and 65535 inclusive (16 bit resolution)" -msgstr "" +msgstr "PWM duty_cycle harus antara 0 dan 65535 inklusif (resolusi 16 bit)" #: shared-bindings/pwmio/PWMOut.c msgid "" "PWM frequency not writable when variable_frequency is False on construction." msgstr "" +"Frekuensi PWM tidak dapat ditulis ketika variabel_frequency Salah pada " +"konstruksi." #: ports/esp32s2/common-hal/displayio/ParallelBus.c #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" -msgstr "" +msgstr "ParallelBus belum didukung" #: py/moduerrno.c msgid "Permission denied" -msgstr "" +msgstr "Izin ditolak" #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c @@ -1455,11 +1462,11 @@ msgstr "" #: ports/atmel-samd/common-hal/countio/Counter.c msgid "Pin must support hardware interrupts" -msgstr "" +msgstr "Pin harus mendukung interupsi perangkat keras" #: ports/stm/common-hal/pulseio/PulseIn.c msgid "Pin number already reserved by EXTI" -msgstr "" +msgstr "Nomor pin sudah dipesan oleh EXTI" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format @@ -1468,6 +1475,9 @@ msgid "" "bytes. If this cannot be avoided, pass allow_inefficient=True to the " "constructor" msgstr "" +"Pinout menggunakan %d byte per elemen, yang mengonsumsi lebih dari %d byte " +"ideal. Jika ini tidak dapat dihindari, berikan allow_inefficient=True ke " +"konstruktor" #: py/builtinhelp.c msgid "Plus any modules on the filesystem\n" @@ -1494,7 +1504,7 @@ msgstr "" #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" -msgstr "" +msgstr "Buffer awalan harus ada di heap" #: main.c msgid "Press any key to enter the REPL. Use CTRL-D to reload." @@ -1504,43 +1514,43 @@ msgstr "" #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." -msgstr "" +msgstr "Pull tidak digunakan saat arah output." #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" -msgstr "" +msgstr "Kesalahan DeInit RNG" #: ports/stm/common-hal/os/__init__.c msgid "RNG Init Error" -msgstr "" +msgstr "Kesalahan Init RNG" #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" -msgstr "" +msgstr "Pembalikan RS485 ditentukan saat tidak dalam mode RS485" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" -msgstr "" +msgstr "Kalibrasi RTC tidak didukung pada board ini" #: shared-bindings/time/__init__.c msgid "RTC is not supported on this board" -msgstr "" +msgstr "RTC tidak didukung di board ini" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c #: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" -msgstr "" +msgstr "RTS/CTS/RS485 Belum didukung pada perangkat ini" #: ports/stm/common-hal/os/__init__.c msgid "Random number generation error" -msgstr "" +msgstr "Kesalahan pembuatan nomor acak" #: shared-bindings/memorymonitor/AllocationSize.c #: shared-bindings/pulseio/PulseIn.c msgid "Read-only" -msgstr "" +msgstr "Baca-saja" #: extmod/vfs_fat.c py/moduerrno.c msgid "Read-only filesystem" @@ -1553,7 +1563,7 @@ msgstr "sistem file (filesystem) bersifat Read-only" #: shared-bindings/displayio/EPaperDisplay.c msgid "Refresh too soon" -msgstr "" +msgstr "Segarkan terlalu cepat" #: shared-bindings/canio/RemoteTransmissionRequest.c msgid "RemoteTransmissionRequests limited to 8 bytes" @@ -1561,7 +1571,7 @@ msgstr "" #: shared-bindings/aesio/aes.c msgid "Requested AES mode is unsupported" -msgstr "" +msgstr "Mode AES yang diminta tidak didukung" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "Right channel unsupported" @@ -1569,7 +1579,7 @@ msgstr "Channel Kanan tidak didukung" #: shared-bindings/_pew/PewPew.c msgid "Row entry must be digitalio.DigitalInOut" -msgstr "" +msgstr "Entri baris harus digitalio.DigitalInOut" #: main.c msgid "Running in safe mode! " diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index 6e65fa13a..32af6c2c6 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -7,14 +7,15 @@ msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-09-29 20:14-0500\n" -"PO-Revision-Date: 2019-04-13 10:10-0700\n" -"Last-Translator: hexthat\n" +"PO-Revision-Date: 2020-10-08 16:22+0000\n" +"Last-Translator: hexthat <hexthat@gmail.com>\n" "Language-Team: Chinese Hanyu Pinyin\n" -"Language: zh\n" +"Language: zh_Latn_pinyin\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"X-Generator: Poedit 2.2.1\n" +"Plural-Forms: nplurals=1; plural=0;\n" +"X-Generator: Weblate 4.3-dev\n" #: main.c msgid "" @@ -99,7 +100,7 @@ msgstr "%q bìxū shì chángdù wèi 2 de yuán zǔ" #: shared-bindings/canio/Match.c msgid "%q out of range" -msgstr "" +msgstr "%q chāochū fànwéi" #: ports/atmel-samd/common-hal/microcontroller/Pin.c msgid "%q pin invalid" @@ -119,7 +120,7 @@ msgstr "xūyào '%q' cānshù" #: py/runtime.c msgid "'%q' object cannot assign attribute '%q'" -msgstr "'%q' duì xiàng wú fǎ fēn pèi shǔ xìng '%q'" +msgstr "'%q' duì xiàng wú fǎ fēn pèi shǔ xìng '%q'" #: py/proto.c msgid "'%q' object does not support '%q'" @@ -291,7 +292,7 @@ msgstr "Suǒyǒu I2C wàiwéi qì zhèngzài shǐyòng" #: ports/atmel-samd/common-hal/canio/Listener.c msgid "All RX FIFOs in use" -msgstr "" +msgstr "Suǒyǒu shǐyòng zhōng de RX FIFO" #: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c msgid "All SPI peripherals are in use" @@ -330,11 +331,11 @@ msgstr "Suǒyǒu jìshí qì shǐyòng" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Already advertising." -msgstr "Mùqián zhèngzài guǎngbò" +msgstr "Mùqián zhèngzài guǎngbò." #: ports/atmel-samd/common-hal/canio/Listener.c msgid "Already have all-matches listener" -msgstr "" +msgstr "yǐ jù yǒu quán pǐ pèi zhēn tīng qì" #: shared-module/memorymonitor/AllocationAlarm.c #: shared-module/memorymonitor/AllocationSize.c @@ -343,7 +344,7 @@ msgstr "yǐ zài yùn xíng" #: ports/esp32s2/common-hal/wifi/Radio.c msgid "Already scanning for wifi networks" -msgstr "" +msgstr "yǐ jīng sǎo miáo WIFI wǎng luò" #: ports/cxd56/common-hal/analogio/AnalogIn.c msgid "AnalogIn not supported on given pin" @@ -391,7 +392,7 @@ msgstr "MicroPython VM zài wèi yùnxíng shí chángshì fēnpèi duī." #: shared-bindings/wifi/Radio.c msgid "Authentication failure" -msgstr "" +msgstr "shēn fèn yàn zhèng shī bài" #: main.c msgid "Auto-reload is off.\n" @@ -454,7 +455,7 @@ msgstr "Huǎnchōng qū dàxiǎo bù zhèngquè. Yīnggāi shì %d zì jié." #: shared-bindings/displayio/Display.c #: shared-bindings/framebufferio/FramebufferDisplay.c msgid "Buffer is not a bytearray." -msgstr "Huǎnchōng qū bùshì bytearray" +msgstr "Huǎnchōng qū bùshì bytearray." #: ports/cxd56/common-hal/camera/Camera.c shared-bindings/displayio/Display.c #: shared-bindings/framebufferio/FramebufferDisplay.c @@ -508,7 +509,7 @@ msgstr "CBC kuài bì xū shì 16 zì jié de bèi shù" #: py/objtype.c msgid "Call super().__init__() before accessing native object." -msgstr "Zài fǎngwèn běn jī wùjiàn zhīqián diàoyòng super().__init__()" +msgstr "Zài fǎngwèn běn jī wùjiàn zhīqián diàoyòng super().__init__()." #: ports/nrf/common-hal/_bleio/Characteristic.c msgid "Can't set CCCD on local Characteristic" @@ -516,7 +517,7 @@ msgstr "Wúfǎ jiāng CCCD shèzhì wéi běndì tèzhēng" #: shared-bindings/_bleio/Adapter.c msgid "Cannot create a new Adapter; use _bleio.adapter;" -msgstr "" +msgstr "Wúfǎ chuàngjiàn xīn de shìpèiqì; shǐyòng_bleio.Adapter;" #: shared-bindings/displayio/Bitmap.c #: shared-bindings/memorymonitor/AllocationSize.c @@ -607,7 +608,7 @@ msgstr "" #: supervisor/shared/safe_mode.c msgid "CircuitPython was unable to allocate the heap.\n" -msgstr "" +msgstr "CircuitPython wúfǎ fēnpèi duī.\n" #: shared-module/bitbangio/SPI.c msgid "Clock pin init failed." @@ -646,7 +647,7 @@ msgstr "Sǔnhuài de yuánshǐ dàimǎ" #: ports/cxd56/common-hal/camera/Camera.c msgid "Could not initialize Camera" -msgstr "" +msgstr "Wúfǎ chūshǐhuà xiàngjī" #: ports/cxd56/common-hal/gnss/GNSS.c msgid "Could not initialize GNSS" @@ -683,7 +684,7 @@ msgstr "Wúfǎ chóngqǐ PWM" #: ports/esp32s2/common-hal/neopixel_write/__init__.c msgid "Could not retrieve clock" -msgstr "" +msgstr "Wúfǎ huòqǔ shízhōng" #: shared-bindings/_bleio/Adapter.c msgid "Could not set address" @@ -777,7 +778,7 @@ msgstr "ECB yí cì zhǐ shǐ yòng 16 gè zì jié" #: ports/esp32s2/common-hal/busio/SPI.c msgid "ESP-IDF memory allocation failed" -msgstr "" +msgstr "ESP-IDF nèicún fēnpèi shībài" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/ps2io/Ps2.c @@ -804,7 +805,7 @@ msgstr "Yùqí de tèdiǎn" #: shared-bindings/_bleio/Adapter.c msgid "Expected a DigitalInOut" -msgstr "" +msgstr "yù qī shù zì huà" #: shared-bindings/_bleio/Characteristic.c msgid "Expected a Service" @@ -812,7 +813,7 @@ msgstr "Yùqí fúwù" #: shared-bindings/_bleio/Adapter.c msgid "Expected a UART" -msgstr "" +msgstr "qī dài UART" #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c #: shared-bindings/_bleio/Service.c @@ -838,7 +839,7 @@ msgstr "FFT jǐn wéi ndarrays dìng yì" #: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Failed SSL handshake" -msgstr "" +msgstr "SSL wòshǒu shībài" #: shared-bindings/ps2io/Ps2.c msgid "Failed sending command." @@ -865,11 +866,11 @@ msgstr "Fēnpèi RX huǎnchōng qū%d zì jié shībài" #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Failed to allocate Wifi memory" -msgstr "" +msgstr "Wúfǎ fēnpèi Wifi nèicún" #: ports/esp32s2/common-hal/wifi/ScannedNetworks.c msgid "Failed to allocate wifi scan memory" -msgstr "" +msgstr "Wúfǎ fēnpèi wifi sǎomiáo nèicún" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: internal error" @@ -881,7 +882,7 @@ msgstr "Liánjiē shībài: Chāoshí" #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Failed to init wifi" -msgstr "" +msgstr "Wúfǎ chūshǐhuà wifi" #: shared-module/audiomp3/MP3Decoder.c msgid "Failed to parse MP3 file" @@ -902,11 +903,11 @@ msgstr "Wénjiàn cúnzài" #: ports/atmel-samd/common-hal/canio/Listener.c msgid "Filters too complex" -msgstr "" +msgstr "guò lǜ qì tài fù zá" #: ports/cxd56/common-hal/camera/Camera.c msgid "Format not supported" -msgstr "" +msgstr "Bù zhīyuán géshì" #: shared-module/framebufferio/FramebufferDisplay.c #, c-format @@ -976,7 +977,7 @@ msgstr "Huǎnchōng qū dàxiǎo bù zhèngquè" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" -msgstr "" +msgstr "Shūrù shíjiānguò zhǎng" #: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c msgid "Input/output error" @@ -1023,7 +1024,7 @@ msgstr "Wúxiào de BMP wénjiàn" #: shared-bindings/wifi/Radio.c msgid "Invalid BSSID" -msgstr "" +msgstr "Wúxiào de BSSID" #: ports/stm/common-hal/analogio/AnalogOut.c msgid "Invalid DAC pin supplied" @@ -1073,7 +1074,7 @@ msgstr "Géshì kuài dàxiǎo wúxiào" #: ports/esp32s2/common-hal/pwmio/PWMOut.c msgid "Invalid frequency" -msgstr "" +msgstr "Wúxiào de pínlǜ" #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Invalid frequency supplied" @@ -1196,7 +1197,7 @@ msgstr "Jìngxiàng shí de zuìdà X zhí wèi%d" #: shared-bindings/canio/Message.c msgid "Messages limited to 8 bytes" -msgstr "" +msgstr "Yóujiàn xiànzhì wèi 8 gè zì jié" #: supervisor/shared/safe_mode.c msgid "MicroPython NLR jump failed. Likely memory corruption." @@ -1308,11 +1309,11 @@ msgstr "Méiyǒu zhǎng zhěngshù zhīchí" #: ports/esp32s2/common-hal/pwmio/PWMOut.c msgid "No more channels available" -msgstr "" +msgstr "Méiyǒu gèng duō kěyòng píndào" #: ports/esp32s2/common-hal/pwmio/PWMOut.c msgid "No more timers available" -msgstr "" +msgstr "Méiyǒu gèng duō kěyòng de jìshí qì" #: ports/stm/common-hal/pwmio/PWMOut.c msgid "No more timers available on this pin." @@ -1320,7 +1321,7 @@ msgstr "Gāi yǐn jiǎo shàng méiyǒu kěyòng de dìngshí qì." #: shared-bindings/wifi/Radio.c msgid "No network with that ssid" -msgstr "" +msgstr "Méiyǒu wǎngluò yǔ gāi ssid" #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" @@ -1344,7 +1345,7 @@ msgstr "Nordic ruǎn shèbèi gùzhàng shēngmíng." #: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c msgid "Not a valid IP string" -msgstr "" +msgstr "Wúxiào de IP zìfú chuàn" #: ports/nrf/common-hal/_bleio/__init__.c #: shared-bindings/_bleio/CharacteristicBuffer.c @@ -1362,7 +1363,7 @@ msgstr "Méiyǒu yùnxíng yǐ bǎocún de dàimǎ.\n" #: shared-bindings/_bleio/__init__.c msgid "Not settable" -msgstr "" +msgstr "bù kě shè zhì" #: shared-bindings/util.c msgid "" @@ -1380,11 +1381,11 @@ msgstr "Zhǐyǒu 8 huò 16 wèi dānwèi " #: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Only IPv4 SOCK_STREAM sockets supported" -msgstr "" +msgstr "Jǐn zhīchí IPv4 SOCK_STREAM tào jiē zì" #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" -msgstr "" +msgstr "Jǐn zhīchí IPv4 dìzhǐ" #: shared-module/displayio/OnDiskBitmap.c #, c-format @@ -1405,11 +1406,11 @@ msgstr "" #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" -msgstr "" +msgstr "Ip jǐn zhīchí raw int" #: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" -msgstr "" +msgstr "tào jiē zì wài" #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." @@ -1479,7 +1480,7 @@ msgstr "Duōbiānxíng zhìshǎo xūyào 3 diǎn" msgid "" "Port does not accept PWM carrier. Pass a pin, frequency and duty cycle " "instead" -msgstr "" +msgstr "Duānkǒu bù jiēshòu PWM zàibō. Tōngguò yǐn jiǎo, pínlǜ hé zhàn kōng bǐ" #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c @@ -1488,7 +1489,7 @@ msgstr "" msgid "" "Port does not accept pins or frequency. Construct and pass a PWMOut Carrier " "instead" -msgstr "" +msgstr "Duānkǒu bù jiēshòu yǐn jiǎo huò pínlǜ. Gòuzào bìng chuándì PWMOut zàibō" #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" @@ -1552,7 +1553,7 @@ msgstr "Shuāxīn tài kuàile" #: shared-bindings/canio/RemoteTransmissionRequest.c msgid "RemoteTransmissionRequests limited to 8 bytes" -msgstr "" +msgstr "RemoteTransmissionRequests xiànzhì wèi 8 gè zì jié" #: shared-bindings/aesio/aes.c msgid "Requested AES mode is unsupported" @@ -1568,7 +1569,7 @@ msgstr "Xíng xiàng bìxū shì digitalio.DigitalInOut" #: main.c msgid "Running in safe mode! " -msgstr "Zài ānquán móshì xià yùnxíng!" +msgstr "Zài ānquán móshì xià yùnxíng! " #: shared-module/sdcardio/SDCard.c msgid "SD card CSD format not supported" @@ -1625,11 +1626,11 @@ msgstr "Xùliè huà yǐjīng shǐyòngguò" #: shared-bindings/ssl/SSLContext.c msgid "Server side context cannot have hostname" -msgstr "" +msgstr "Fúwùqì duān shàngxiàwén bùnéng jùyǒu zhǔjī míng" #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" -msgstr "" +msgstr "bù zhī chí dà xiǎo" #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." @@ -1644,7 +1645,7 @@ msgstr "Qiēpiàn bù shòu zhīchí" #: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "SocketPool can only be used with wifi.radio" -msgstr "" +msgstr "SocketPool zhǐ néng yǔ wifi.Radio yīqǐ shǐyòng" #: shared-bindings/aesio/aes.c msgid "Source and destination buffers must be the same length" @@ -1692,7 +1693,7 @@ msgstr "" #: shared-bindings/rgbmatrix/RGBMatrix.c msgid "The length of rgb_pins must be 6, 12, 18, 24, or 30" -msgstr "" +msgstr "Rgb_pins de chángdù bìxū wèi 6,12,18,24 huò 30" #: supervisor/shared/safe_mode.c msgid "" @@ -1823,7 +1824,7 @@ msgstr "Wúfǎ fēnpèi huǎnchōng qū yòng yú qiānmíng zhuǎnhuàn" #: ports/esp32s2/common-hal/busio/I2C.c msgid "Unable to create lock" -msgstr "" +msgstr "Wúfǎ chuàngjiàn suǒ" #: shared-module/displayio/I2CDisplay.c #, c-format @@ -1854,11 +1855,11 @@ msgstr "Yìwài de nrfx uuid lèixíng" #: ports/esp32s2/common-hal/socketpool/Socket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" -msgstr "" +msgstr "Wèi chǔlǐ de ESP TLS cuòwù %d %d %x %d" #: shared-bindings/wifi/Radio.c msgid "Unknown failure" -msgstr "" +msgstr "Wèizhī gùzhàng" #: ports/nrf/common-hal/_bleio/__init__.c #, c-format @@ -1946,7 +1947,7 @@ msgstr "WatchDogTimer dāngqián wèi yùnxíng" #: shared-bindings/watchdog/WatchDogTimer.c msgid "WatchDogTimer.mode cannot be changed once set to WatchDogMode.RESET" msgstr "" -"Yīdàn shèzhì wèi WatchDogMode.RESET, zé bùnéng gēnggǎi WatchDogTimer.Mode." +"Yīdàn shèzhì wèi WatchDogMode.RESET, zé bùnéng gēnggǎi WatchDogTimer.Mode" #: shared-bindings/watchdog/WatchDogTimer.c msgid "WatchDogTimer.timeout must be greater than 0" @@ -1967,13 +1968,14 @@ msgid "" msgstr "" "Huānyíng lái dào Adafruit CircuitPython%s!\n" "\n" -"Qǐng fǎngwèn xuéxí. learn.Adafruit.com/category/circuitpython.\n" +"Qǐng fǎngwèn learn.Adafruit.Com/category/circuitpython yǐ huòqǔ xiàngmù " +"zhǐnán.\n" "\n" -"Ruò yào liè chū nèizài de mókuài, qǐng qǐng zuò yǐxià `help(\"modules\")`.\n" +"Yào liè chū nèizhì mókuài, qǐng zhíxíng `help(“modules”)`\n" #: shared-bindings/wifi/Radio.c msgid "WiFi password must be between 8 and 63 characters" -msgstr "" +msgstr "WiFi mìmǎ bìxū jiè yú 8 dào 63 gè zìfú zhī jiān" #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Writes not supported on Characteristic" @@ -1989,7 +1991,7 @@ msgstr "Nín qǐngqiú qǐdòng ānquán móshì " #: py/objtype.c msgid "__init__() should return None" -msgstr "__init__() fǎnhuí not" +msgstr "__init__() fǎnhuí not" #: py/objtype.c msgid "__init__() should return None, not '%q'" @@ -2145,7 +2147,7 @@ msgstr "zì jié > 8 wèi" #: py/objarray.c msgid "bytes length not a multiple of item size" -msgstr "" +msgstr "zì jié chángdù, bùshì xiàngmù dàxiǎo de bèishù" #: py/objstr.c msgid "bytes value out of range" @@ -2405,7 +2407,8 @@ msgstr "mòrèn 'except' bìxū shì zuìhòu yīgè" msgid "" "destination buffer must be a bytearray or array of type 'B' for bit_depth = 8" msgstr "" -"mùbiāo huǎnchōng qū bìxū shì zì yǎnlèi huò lèixíng 'B' wèi wèi shēndù = 8" +"Duìyú bit_depth = 8, mùbiāo huǎnchōng qū bìxū shì zì jié shùzǔ huò lèixíng " +"wèi 'B' de shùzǔ" #: shared-bindings/audiobusio/PDMIn.c msgid "destination buffer must be an array of type 'H' for bit_depth = 16" @@ -2463,11 +2466,11 @@ msgstr "lìwài bìxū láizì BaseException" #: shared-bindings/canio/CAN.c msgid "expected '%q' but got '%q'" -msgstr "" +msgstr "yùqí wèi'%q'dàn dédàole'%q'" #: shared-bindings/canio/CAN.c msgid "expected '%q' or '%q' but got '%q'" -msgstr "" +msgstr "yùqí wèi'%q'huò'%q', dàn huòdéle'%q'" #: py/objstr.c msgid "expected ':' after format specifier" @@ -2680,7 +2683,7 @@ msgstr "chūshǐ zhí bìxū shì kě diédài de" #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c msgid "initial_value length is wrong" -msgstr "" +msgstr "Initial_value chángdù cuòwù" #: py/compile.c msgid "inline assembler must be a function" @@ -2877,7 +2880,7 @@ msgstr "Dāng gùdìng chángdù wèi %s shí, zuìdà chángdù bìxū wèi 0-% #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c msgid "max_length must be > 0" -msgstr "" +msgstr "Max_length bìxū > 0" #: py/runtime.c msgid "maximum recursion depth exceeded" @@ -2937,9 +2940,8 @@ msgid "name reused for argument" msgstr "cān shǔ míngchēng bèi chóngxīn shǐyòng" #: py/emitnative.c -#, fuzzy msgid "native yield" -msgstr "yuánshēng chǎnliàng" +msgstr "yuán chǎn" #: py/runtime.c #, c-format @@ -3116,11 +3118,11 @@ msgstr "ord() yùqí zìfú, dàn chángdù zìfú chuàn %d" #: shared-bindings/displayio/Bitmap.c msgid "out of range of source" -msgstr "" +msgstr "yuán fàn wéi wài" #: shared-bindings/displayio/Bitmap.c msgid "out of range of target" -msgstr "" +msgstr "mù biāo fàn wéi wài" #: py/objint_mpz.c msgid "overflow converting long int to machine word" @@ -3129,7 +3131,7 @@ msgstr "chāo gāo zhuǎnhuàn zhǎng zhěng shùzì shí" #: py/modstruct.c #, c-format msgid "pack expected %d items for packing (got %d)" -msgstr "" +msgstr "bāo zhuāng yù qī de %d bāo zhuāng xiàng mù （dé dào %d)" #: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c msgid "palette must be 32 bytes long" @@ -3169,7 +3171,7 @@ msgstr "duōbiānxíng zhī néng zài yīgè fù jí zhōng zhùcè" #: ports/esp32s2/common-hal/pulseio/PulseIn.c msgid "pop from an empty PulseIn" -msgstr "cóng kōng de PulseIn dànchū dànchū" +msgstr "cóng kōng mài chōng tán chū" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c @@ -3195,7 +3197,7 @@ msgstr "pow() yǒu 3 cānshù xūyào zhěngshù" #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h msgid "pressing boot button at start up.\n" -msgstr "" +msgstr "Zài qǐdòng shí àn qǐdòng ànniǔ.\n" #: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h #: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h @@ -3203,7 +3205,7 @@ msgstr "" #: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h #: ports/atmel-samd/boards/meowmeow/mpconfigboard.h msgid "pressing both buttons at start up.\n" -msgstr "" +msgstr "zài qǐdòng shí tóngshí àn xià liǎng gè ànniǔ.\n" #: extmod/modutimeq.c msgid "queue overflow" @@ -3330,7 +3332,7 @@ msgstr "sosfilt xūyào diédài cānshù" #: shared-bindings/displayio/Bitmap.c msgid "source palette too large" -msgstr "" +msgstr "yuán miànbǎn tài dà" #: py/objstr.c msgid "start/end indices" @@ -3571,7 +3573,7 @@ msgstr "kān mén gǒu chāoshí bìxū dàyú 0" #: shared-bindings/rgbmatrix/RGBMatrix.c msgid "width must be greater than zero" -msgstr "" +msgstr "kuāndù bìxū dàyú líng" #: shared-bindings/_bleio/Adapter.c msgid "window must be <= interval" @@ -242,19 +242,24 @@ void cleanup_after_vm(supervisor_allocation* heap) { reset_status_led(); } +void print_code_py_status_message(safe_mode_t safe_mode) { + if (autoreload_is_enabled()) { + serial_write_compressed(translate("Auto-reload is on. Simply save files over USB to run them or enter REPL to disable.\n")); + } else { + serial_write_compressed(translate("Auto-reload is off.\n")); + } + if (safe_mode != NO_SAFE_MODE) { + serial_write_compressed(translate("Running in safe mode! ")); + serial_write_compressed(translate("Not running saved code.\n")); + } +} + bool run_code_py(safe_mode_t safe_mode) { bool serial_connected_at_start = serial_connected(); #if CIRCUITPY_AUTORELOAD_DELAY_MS > 0 if (serial_connected_at_start) { serial_write("\n"); - if (autoreload_is_enabled()) { - serial_write_compressed(translate("Auto-reload is on. Simply save files over USB to run them or enter REPL to disable.\n")); - } else if (safe_mode != NO_SAFE_MODE) { - serial_write_compressed(translate("Running in safe mode! ")); - serial_write_compressed(translate("Auto-reload is off.\n")); - } else if (!autoreload_is_enabled()) { - serial_write_compressed(translate("Auto-reload is off.\n")); - } + print_code_py_status_message(safe_mode); } #endif @@ -266,10 +271,7 @@ bool run_code_py(safe_mode_t safe_mode) { bool found_main = false; - if (safe_mode != NO_SAFE_MODE) { - serial_write_compressed(translate("Running in safe mode! ")); - serial_write_compressed(translate("Not running saved code.\n")); - } else { + if (safe_mode == NO_SAFE_MODE) { new_status_color(MAIN_RUNNING); static const char * const supported_filenames[] = STRING_LIST("code.txt", "code.py", "main.py", "main.txt"); @@ -322,16 +324,8 @@ bool run_code_py(safe_mode_t safe_mode) { } if (!serial_connected_before_animation && serial_connected()) { - if (serial_connected_at_start) { - serial_write("\n\n"); - } - if (!serial_connected_at_start) { - if (autoreload_is_enabled()) { - serial_write_compressed(translate("Auto-reload is on. Simply save files over USB to run them or enter REPL to disable.\n")); - } else { - serial_write_compressed(translate("Auto-reload is off.\n")); - } + print_code_py_status_message(safe_mode); } print_safe_mode_message(safe_mode); serial_write("\n"); @@ -486,8 +480,10 @@ int __attribute__((used)) main(void) { reset_devices(); reset_board(); - // Turn on autoreload by default but before boot.py in case it wants to change it. - autoreload_enable(); + // If not in safe mode turn on autoreload by default but before boot.py in case it wants to change it. + if (safe_mode == NO_SAFE_MODE) { + autoreload_enable(); + } // By default our internal flash is readonly to local python code and // writable over USB. Set it here so that boot.py can change it. diff --git a/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h b/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h index 90a368006..93d901bec 100644 --- a/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h +++ b/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h @@ -26,7 +26,7 @@ //Micropython setup -#define MICROPY_HW_BOARD_NAME "FeatherS2" +#define MICROPY_HW_BOARD_NAME "FeatherS2 PreRelease" #define MICROPY_HW_MCU_NAME "ESP32S2" #define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0) diff --git a/ports/mimxrt10xx/Makefile b/ports/mimxrt10xx/Makefile index 248798f63..12c9bde4f 100644 --- a/ports/mimxrt10xx/Makefile +++ b/ports/mimxrt10xx/Makefile @@ -75,7 +75,7 @@ INC += \ # NDEBUG disables assert() statements. This reduces code size pretty dramatically, per tannewt. -CFLAGS += -Os -DNDEBUG +CFLAGS += -Os -DNDEBUG -ffreestanding # TinyUSB defines CFLAGS += -DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX -DCFG_TUD_MIDI_RX_BUFSIZE=512 -DCFG_TUD_CDC_RX_BUFSIZE=512 -DCFG_TUD_MIDI_TX_BUFSIZE=512 -DCFG_TUD_CDC_TX_BUFSIZE=512 -DCFG_TUD_MSC_BUFSIZE=1024 diff --git a/ports/mimxrt10xx/boards/board.h b/ports/mimxrt10xx/boards/board.h index 92d02d900..678c223ae 100644 --- a/ports/mimxrt10xx/boards/board.h +++ b/ports/mimxrt10xx/boards/board.h @@ -33,6 +33,7 @@ #include "py/mpconfig.h" #include "fsl_common.h" +#include "fsl_flexspi_nor_config.h" // Initializes board related state once on start up. void board_init(void); @@ -45,4 +46,11 @@ bool board_requests_safe_mode(void); // Reset the state of off MCU components such as neopixels. void reset_board(void); +#define SEQUENCE(first, second, third, fourth) first, second, third, fourth +#define TWO_EMPTY_STEPS 0x00000000 +#define EMPTY_SEQUENCE SEQUENCE(TWO_EMPTY_STEPS, TWO_EMPTY_STEPS, TWO_EMPTY_STEPS, TWO_EMPTY_STEPS) + +// FlexSPI configuration that stores command info. +extern const flexspi_nor_config_t qspiflash_config; + #endif // MICROPY_INCLUDED_MIMXRT10XX_BOARDS_BOARD_H diff --git a/ports/mimxrt10xx/boards/feather_m7_1011/flash_config.c b/ports/mimxrt10xx/boards/feather_m7_1011/flash_config.c index b74c0b151..282464c75 100644 --- a/ports/mimxrt10xx/boards/feather_m7_1011/flash_config.c +++ b/ports/mimxrt10xx/boards/feather_m7_1011/flash_config.c @@ -6,7 +6,7 @@ */ #include "fsl_flexspi_nor_boot.h" -#include "fsl_flexspi_nor_config.h" +#include "boards/board.h" __attribute__((section(".boot_hdr.ivt"))) @@ -35,88 +35,135 @@ const BOOT_DATA_T boot_data = { 0xFFFFFFFF /* empty - extra data word */ }; +// Config for W25Q32JV with QSPI routed. __attribute__((section(".boot_hdr.conf"))) -// Values copied from https://github.com/PaulStoffregen/cores/blob/ddb23fa5d97dac763bc06e11b9b41f026bd51f0a/teensy4/bootdata.c#L39 const flexspi_nor_config_t qspiflash_config = { + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, + .blockSize = 0x00010000, + .isUniformBlockSize = false, .memConfig = { .tag = FLEXSPI_CFG_BLK_TAG, .version = FLEXSPI_CFG_BLK_VERSION, .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, - .csHoldTime = 1u, - .csSetupTime = 2u, - // Enable DDR mode, Wordaddressable, Safe configuration, Differential clock + .csHoldTime = 3u, + .csSetupTime = 3u, + + .busyOffset = 0u, // Status bit 0 indicates busy. + .busyBitPolarity = 0u, // Busy when the bit is 1. + + .deviceModeCfgEnable = 1u, + .deviceModeType = kDeviceConfigCmdType_QuadEnable, + .deviceModeSeq = { + .seqId = 4u, + .seqNum = 1u, + }, + .deviceModeArg = 0x02, // Bit pattern for setting Quad Enable. .deviceType = kFlexSpiDeviceType_SerialNOR, .sflashPadType = kSerialFlash_4Pads, - .serialClkFreq = kFlexSpiSerialClk_60MHz, // 03 + .serialClkFreq = kFlexSpiSerialClk_133MHz, .sflashA1Size = FLASH_SIZE, .lookupTable = { // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) - // (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | - // FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) - // Read LUTs - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), - FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), - 0, - 0, - - 0x24040405, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000406, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x08180420, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x081804D8, - 0, - 0, - 0, - - 0x08180402, - 0x00002004, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000460, + // The high 16 bits is command 1 and the low are command 0. + // Within a command, the top 6 bits are the opcode, the next two are the number + // of pads and then last byte is the operand. The operand's meaning changes + // per opcode. + + // Indices with ROM should always have the same function because the ROM + // bootloader uses it. + + // 0: ROM: Read LUTs + // Quad version + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB /* the command to send */, + RADDR_SDR, FLEXSPI_4PAD, 24 /* bits to transmit */), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 6 /* 6 dummy cycles, 2 for M7-0 and 4 dummy */, + READ_SDR, FLEXSPI_4PAD, 0x04), + // Single fast read version, good for debugging. + // FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x0B /* the command to send */, + // RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + // FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 8 /* 8 dummy clocks */, + // READ_SDR, FLEXSPI_1PAD, 0x04), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 1: ROM: Read status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05 /* the command to send */, + READ_SDR, FLEXSPI_1PAD, 0x02), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 2: Empty + EMPTY_SEQUENCE, + + // 3: ROM: Write Enable + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06 /* the command to send */, + STOP, FLEXSPI_1PAD, 0x00), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 4: Config: Write Status -2 + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x31 /* the command to send */, + WRITE_SDR, FLEXSPI_1PAD, 0x01 /* number of bytes to write */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 5: ROM: Erase Sector + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 6: Empty + EMPTY_SEQUENCE, + + // 7: Empty + EMPTY_SEQUENCE, + + // 8: Block Erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xD8 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 9: ROM: Page program + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + + FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04 /* data out */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 10: Empty + EMPTY_SEQUENCE, + + // 11: ROM: Chip erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60 /* the command to send */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 12: Empty + EMPTY_SEQUENCE, + + // 13: ROM: Read SFDP + EMPTY_SEQUENCE, + + // 14: ROM: Restore no cmd + EMPTY_SEQUENCE, + + // 15: ROM: Dummy + EMPTY_SEQUENCE }, }, - .pageSize = 256u, - .sectorSize = 4u * 1024u, - .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, - .blockSize = 0x00010000, - .isUniformBlockSize = false, }; diff --git a/ports/mimxrt10xx/boards/feather_mimxrt1011/flash_config.c b/ports/mimxrt10xx/boards/feather_mimxrt1011/flash_config.c index b74c0b151..51cc0f164 100644 --- a/ports/mimxrt10xx/boards/feather_mimxrt1011/flash_config.c +++ b/ports/mimxrt10xx/boards/feather_mimxrt1011/flash_config.c @@ -6,7 +6,7 @@ */ #include "fsl_flexspi_nor_boot.h" -#include "fsl_flexspi_nor_config.h" +#include "boards/board.h" __attribute__((section(".boot_hdr.ivt"))) @@ -35,88 +35,135 @@ const BOOT_DATA_T boot_data = { 0xFFFFFFFF /* empty - extra data word */ }; +// Config for W25Q64JV with QSPI routed. __attribute__((section(".boot_hdr.conf"))) -// Values copied from https://github.com/PaulStoffregen/cores/blob/ddb23fa5d97dac763bc06e11b9b41f026bd51f0a/teensy4/bootdata.c#L39 const flexspi_nor_config_t qspiflash_config = { + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, + .blockSize = 0x00010000, + .isUniformBlockSize = false, .memConfig = { .tag = FLEXSPI_CFG_BLK_TAG, .version = FLEXSPI_CFG_BLK_VERSION, .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, - .csHoldTime = 1u, - .csSetupTime = 2u, - // Enable DDR mode, Wordaddressable, Safe configuration, Differential clock + .csHoldTime = 3u, + .csSetupTime = 3u, + + .busyOffset = 0u, // Status bit 0 indicates busy. + .busyBitPolarity = 0u, // Busy when the bit is 1. + + .deviceModeCfgEnable = 1u, + .deviceModeType = kDeviceConfigCmdType_QuadEnable, + .deviceModeSeq = { + .seqId = 4u, + .seqNum = 1u, + }, + .deviceModeArg = 0x02, .deviceType = kFlexSpiDeviceType_SerialNOR, .sflashPadType = kSerialFlash_4Pads, - .serialClkFreq = kFlexSpiSerialClk_60MHz, // 03 + .serialClkFreq = kFlexSpiSerialClk_133MHz, .sflashA1Size = FLASH_SIZE, .lookupTable = { // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) - // (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | - // FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) - // Read LUTs - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), - FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), - 0, - 0, - - 0x24040405, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000406, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x08180420, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x081804D8, - 0, - 0, - 0, - - 0x08180402, - 0x00002004, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000460, + // The high 16 bits is command 1 and the low are command 0. + // Within a command, the top 6 bits are the opcode, the next two are the number + // of pads and then last byte is the operand. The operand's meaning changes + // per opcode. + + // Indices with ROM should always have the same function because the ROM + // bootloader uses it. + + // 0: ROM: Read LUTs + // Quad version + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB /* the command to send */, + RADDR_SDR, FLEXSPI_4PAD, 24 /* bits to transmit */), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 6 /* 6 dummy cycles, 2 for M7-0 and 4 dummy */, + READ_SDR, FLEXSPI_4PAD, 0x04), + // Single fast read version, good for debugging. + // FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x0B /* the command to send */, + // RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + // FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 8 /* 8 dummy clocks */, + // READ_SDR, FLEXSPI_1PAD, 0x04), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 1: ROM: Read status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05 /* the command to send */, + READ_SDR, FLEXSPI_1PAD, 0x01), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 2: Empty + EMPTY_SEQUENCE, + + // 3: ROM: Write Enable + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06 /* the command to send */, + STOP, FLEXSPI_1PAD, 0x00), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 4: Config: Write Status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x31 /* the command to send */, + WRITE_SDR, FLEXSPI_1PAD, 0x01), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 5: ROM: Erase Sector + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 6: Empty + EMPTY_SEQUENCE, + + // 7: Empty + EMPTY_SEQUENCE, + + // 8: Block Erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xD8 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 9: ROM: Page program + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + + FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04 /* data out */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 10: Empty + EMPTY_SEQUENCE, + + // 11: ROM: Chip erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60 /* the command to send */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 12: Empty + EMPTY_SEQUENCE, + + // 13: ROM: Read SFDP + EMPTY_SEQUENCE, + + // 14: ROM: Restore no cmd + EMPTY_SEQUENCE, + + // 15: ROM: Dummy + EMPTY_SEQUENCE }, }, - .pageSize = 256u, - .sectorSize = 4u * 1024u, - .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, - .blockSize = 0x00010000, - .isUniformBlockSize = false, }; diff --git a/ports/mimxrt10xx/boards/feather_mimxrt1062/flash_config.c b/ports/mimxrt10xx/boards/feather_mimxrt1062/flash_config.c index b74c0b151..51cc0f164 100644 --- a/ports/mimxrt10xx/boards/feather_mimxrt1062/flash_config.c +++ b/ports/mimxrt10xx/boards/feather_mimxrt1062/flash_config.c @@ -6,7 +6,7 @@ */ #include "fsl_flexspi_nor_boot.h" -#include "fsl_flexspi_nor_config.h" +#include "boards/board.h" __attribute__((section(".boot_hdr.ivt"))) @@ -35,88 +35,135 @@ const BOOT_DATA_T boot_data = { 0xFFFFFFFF /* empty - extra data word */ }; +// Config for W25Q64JV with QSPI routed. __attribute__((section(".boot_hdr.conf"))) -// Values copied from https://github.com/PaulStoffregen/cores/blob/ddb23fa5d97dac763bc06e11b9b41f026bd51f0a/teensy4/bootdata.c#L39 const flexspi_nor_config_t qspiflash_config = { + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, + .blockSize = 0x00010000, + .isUniformBlockSize = false, .memConfig = { .tag = FLEXSPI_CFG_BLK_TAG, .version = FLEXSPI_CFG_BLK_VERSION, .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, - .csHoldTime = 1u, - .csSetupTime = 2u, - // Enable DDR mode, Wordaddressable, Safe configuration, Differential clock + .csHoldTime = 3u, + .csSetupTime = 3u, + + .busyOffset = 0u, // Status bit 0 indicates busy. + .busyBitPolarity = 0u, // Busy when the bit is 1. + + .deviceModeCfgEnable = 1u, + .deviceModeType = kDeviceConfigCmdType_QuadEnable, + .deviceModeSeq = { + .seqId = 4u, + .seqNum = 1u, + }, + .deviceModeArg = 0x02, .deviceType = kFlexSpiDeviceType_SerialNOR, .sflashPadType = kSerialFlash_4Pads, - .serialClkFreq = kFlexSpiSerialClk_60MHz, // 03 + .serialClkFreq = kFlexSpiSerialClk_133MHz, .sflashA1Size = FLASH_SIZE, .lookupTable = { // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) - // (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | - // FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) - // Read LUTs - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), - FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), - 0, - 0, - - 0x24040405, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000406, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x08180420, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x081804D8, - 0, - 0, - 0, - - 0x08180402, - 0x00002004, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000460, + // The high 16 bits is command 1 and the low are command 0. + // Within a command, the top 6 bits are the opcode, the next two are the number + // of pads and then last byte is the operand. The operand's meaning changes + // per opcode. + + // Indices with ROM should always have the same function because the ROM + // bootloader uses it. + + // 0: ROM: Read LUTs + // Quad version + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB /* the command to send */, + RADDR_SDR, FLEXSPI_4PAD, 24 /* bits to transmit */), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 6 /* 6 dummy cycles, 2 for M7-0 and 4 dummy */, + READ_SDR, FLEXSPI_4PAD, 0x04), + // Single fast read version, good for debugging. + // FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x0B /* the command to send */, + // RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + // FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 8 /* 8 dummy clocks */, + // READ_SDR, FLEXSPI_1PAD, 0x04), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 1: ROM: Read status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05 /* the command to send */, + READ_SDR, FLEXSPI_1PAD, 0x01), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 2: Empty + EMPTY_SEQUENCE, + + // 3: ROM: Write Enable + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06 /* the command to send */, + STOP, FLEXSPI_1PAD, 0x00), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 4: Config: Write Status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x31 /* the command to send */, + WRITE_SDR, FLEXSPI_1PAD, 0x01), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 5: ROM: Erase Sector + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 6: Empty + EMPTY_SEQUENCE, + + // 7: Empty + EMPTY_SEQUENCE, + + // 8: Block Erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xD8 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 9: ROM: Page program + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + + FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04 /* data out */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 10: Empty + EMPTY_SEQUENCE, + + // 11: ROM: Chip erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60 /* the command to send */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 12: Empty + EMPTY_SEQUENCE, + + // 13: ROM: Read SFDP + EMPTY_SEQUENCE, + + // 14: ROM: Restore no cmd + EMPTY_SEQUENCE, + + // 15: ROM: Dummy + EMPTY_SEQUENCE }, }, - .pageSize = 256u, - .sectorSize = 4u * 1024u, - .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, - .blockSize = 0x00010000, - .isUniformBlockSize = false, }; diff --git a/ports/mimxrt10xx/boards/imxrt1010_evk/flash_config.c b/ports/mimxrt10xx/boards/imxrt1010_evk/flash_config.c index 7e8fb75b2..19573bd99 100644 --- a/ports/mimxrt10xx/boards/imxrt1010_evk/flash_config.c +++ b/ports/mimxrt10xx/boards/imxrt1010_evk/flash_config.c @@ -6,7 +6,8 @@ */ #include "fsl_flexspi_nor_boot.h" -#include "fsl_flexspi_nor_config.h" +#include "boards/board.h" + __attribute__((section(".boot_hdr.ivt"))) /************************************* @@ -34,88 +35,135 @@ const BOOT_DATA_T boot_data = { 0xFFFFFFFF /* empty - extra data word */ }; +// Config for AT25SF128A with QSPI routed. __attribute__((section(".boot_hdr.conf"))) -// Values copied from https://github.com/PaulStoffregen/cores/blob/ddb23fa5d97dac763bc06e11b9b41f026bd51f0a/teensy4/bootdata.c#L39 const flexspi_nor_config_t qspiflash_config = { + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, + .blockSize = 0x00010000, + .isUniformBlockSize = false, .memConfig = { .tag = FLEXSPI_CFG_BLK_TAG, .version = FLEXSPI_CFG_BLK_VERSION, .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, - .csHoldTime = 1u, - .csSetupTime = 2u, - // Enable DDR mode, Wordaddressable, Safe configuration, Differential clock + .csHoldTime = 3u, + .csSetupTime = 3u, + + .busyOffset = 0u, // Status bit 0 indicates busy. + .busyBitPolarity = 0u, // Busy when the bit is 1. + + .deviceModeCfgEnable = 1u, + .deviceModeType = kDeviceConfigCmdType_QuadEnable, + .deviceModeSeq = { + .seqId = 4u, + .seqNum = 1u, + }, + .deviceModeArg = 0x02, .deviceType = kFlexSpiDeviceType_SerialNOR, .sflashPadType = kSerialFlash_4Pads, - .serialClkFreq = kFlexSpiSerialClk_60MHz, // 03 + .serialClkFreq = kFlexSpiSerialClk_60MHz, .sflashA1Size = FLASH_SIZE, .lookupTable = { // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) - // (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | - // FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) - // Read LUTs - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), - FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), - 0, - 0, - - 0x24040405, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000406, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x08180420, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x081804D8, - 0, - 0, - 0, - - 0x08180402, - 0x00002004, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000460, + // The high 16 bits is command 1 and the low are command 0. + // Within a command, the top 6 bits are the opcode, the next two are the number + // of pads and then last byte is the operand. The operand's meaning changes + // per opcode. + + // Indices with ROM should always have the same function because the ROM + // bootloader uses it. + + // 0: ROM: Read LUTs + // Quad version + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB /* the command to send */, + RADDR_SDR, FLEXSPI_4PAD, 24 /* bits to transmit */), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 6 /* 6 dummy cycles, 2 for M7-0 and 4 dummy */, + READ_SDR, FLEXSPI_4PAD, 0x04), + // Single fast read version, good for debugging. + // FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x0B /* the command to send */, + // RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + // FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 8 /* 8 dummy clocks */, + // READ_SDR, FLEXSPI_1PAD, 0x04), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 1: ROM: Read status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05 /* the command to send */, + READ_SDR, FLEXSPI_1PAD, 0x02), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 2: Empty + EMPTY_SEQUENCE, + + // 3: ROM: Write Enable + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06 /* the command to send */, + STOP, FLEXSPI_1PAD, 0x00), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 4: Config: Write Status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x31 /* the command to send */, + WRITE_SDR, FLEXSPI_1PAD, 0x01), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 5: ROM: Erase Sector + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 6: Empty + EMPTY_SEQUENCE, + + // 7: Empty + EMPTY_SEQUENCE, + + // 8: Block Erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xD8 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 9: ROM: Page program + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + + FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04 /* data out */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 10: Empty + EMPTY_SEQUENCE, + + // 11: ROM: Chip erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60 /* the command to send */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 12: Empty + EMPTY_SEQUENCE, + + // 13: ROM: Read SFDP + EMPTY_SEQUENCE, + + // 14: ROM: Restore no cmd + EMPTY_SEQUENCE, + + // 15: ROM: Dummy + EMPTY_SEQUENCE }, }, - .pageSize = 256u, - .sectorSize = 4u * 1024u, - .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, - .blockSize = 0x00010000, - .isUniformBlockSize = false, }; diff --git a/ports/mimxrt10xx/boards/imxrt1020_evk/flash_config.c b/ports/mimxrt10xx/boards/imxrt1020_evk/flash_config.c index 43ffe0dd1..40b566618 100644 --- a/ports/mimxrt10xx/boards/imxrt1020_evk/flash_config.c +++ b/ports/mimxrt10xx/boards/imxrt1020_evk/flash_config.c @@ -6,7 +6,7 @@ */ #include "fsl_flexspi_nor_boot.h" -#include "fsl_flexspi_nor_config.h" +#include "boards/board.h" __attribute__((section(".boot_hdr.ivt"))) @@ -35,92 +35,135 @@ const BOOT_DATA_T boot_data = { 0xFFFFFFFF /* empty - extra data word */ }; +// Config for IS25LP064A with QSPI routed. __attribute__((section(".boot_hdr.conf"))) -// Values copied from https://github.com/PaulStoffregen/cores/blob/ddb23fa5d97dac763bc06e11b9b41f026bd51f0a/teensy4/bootdata.c#L39 const flexspi_nor_config_t qspiflash_config = { + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, + .blockSize = 0x00010000, + .isUniformBlockSize = false, .memConfig = { .tag = FLEXSPI_CFG_BLK_TAG, .version = FLEXSPI_CFG_BLK_VERSION, -#ifdef BOARD_USING_SECONDARY_QSPI_PINMUX - .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromInternally, -#else .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, -#endif - .csHoldTime = 1u, - .csSetupTime = 2u, - // Enable DDR mode, Wordaddressable, Safe configuration, Differential clock + .csHoldTime = 3u, + .csSetupTime = 3u, + + .busyOffset = 0u, // Status bit 0 indicates busy. + .busyBitPolarity = 0u, // Busy when the bit is 1. + + .deviceModeCfgEnable = 1u, + .deviceModeType = kDeviceConfigCmdType_QuadEnable, + .deviceModeSeq = { + .seqId = 4u, + .seqNum = 1u, + }, + .deviceModeArg = 0x40, .deviceType = kFlexSpiDeviceType_SerialNOR, .sflashPadType = kSerialFlash_4Pads, - .serialClkFreq = kFlexSpiSerialClk_60MHz, // 03 + .serialClkFreq = kFlexSpiSerialClk_30MHz, .sflashA1Size = FLASH_SIZE, .lookupTable = { // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) - // (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | - // FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) - // Read LUTs - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), - FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), - 0, - 0, - - 0x24040405, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000406, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x08180420, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x081804D8, - 0, - 0, - 0, - - 0x08180402, - 0x00002004, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000460, + // The high 16 bits is command 1 and the low are command 0. + // Within a command, the top 6 bits are the opcode, the next two are the number + // of pads and then last byte is the operand. The operand's meaning changes + // per opcode. + + // Indices with ROM should always have the same function because the ROM + // bootloader uses it. + + // 0: ROM: Read LUTs + // Quad version + // SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB /* the command to send */, + // RADDR_SDR, FLEXSPI_4PAD, 24 bits to transmit ), + // FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 6 /* 6 dummy cycles, 2 for M7-0 and 4 dummy */, + // READ_SDR, FLEXSPI_4PAD, 0x04), + // Single fast read version, good for debugging. + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x0B /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 8 /* 8 dummy clocks */, + READ_SDR, FLEXSPI_1PAD, 0x04), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 1: ROM: Read status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05 /* the command to send */, + READ_SDR, FLEXSPI_1PAD, 0x01), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 2: Empty + EMPTY_SEQUENCE, + + // 3: ROM: Write Enable + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06 /* the command to send */, + STOP, FLEXSPI_1PAD, 0x00), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 4: Config: Write Status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x01 /* the command to send */, + WRITE_SDR, FLEXSPI_1PAD, 0x01), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 5: ROM: Erase Sector + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 6: Empty + EMPTY_SEQUENCE, + + // 7: Empty + EMPTY_SEQUENCE, + + // 8: Block Erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xD8 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 9: ROM: Page program + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + + FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04 /* data out */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 10: Empty + EMPTY_SEQUENCE, + + // 11: ROM: Chip erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60 /* the command to send */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 12: Empty + EMPTY_SEQUENCE, + + // 13: ROM: Read SFDP + EMPTY_SEQUENCE, + + // 14: ROM: Restore no cmd + EMPTY_SEQUENCE, + + // 15: ROM: Dummy + EMPTY_SEQUENCE }, }, - .pageSize = 256u, - .sectorSize = 4u * 1024u, - .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, - .blockSize = 0x00010000, - .isUniformBlockSize = false, }; diff --git a/ports/mimxrt10xx/boards/imxrt1060_evk/flash_config.c b/ports/mimxrt10xx/boards/imxrt1060_evk/flash_config.c index 7e046d494..d79a8d0f9 100644 --- a/ports/mimxrt10xx/boards/imxrt1060_evk/flash_config.c +++ b/ports/mimxrt10xx/boards/imxrt1060_evk/flash_config.c @@ -6,10 +6,10 @@ */ #include "fsl_flexspi_nor_boot.h" -#include "fsl_flexspi_nor_config.h" +#include "boards/board.h" -__attribute__((section(".boot_hdr.ivt"))) +__attribute__((section(".boot_hdr.ivt"))) /************************************* * IVT Data *************************************/ @@ -35,88 +35,135 @@ const BOOT_DATA_T boot_data = { 0xFFFFFFFF /* empty - extra data word */ }; +// Config for IS25WP064A with QSPI routed. __attribute__((section(".boot_hdr.conf"))) -// Values copied from https://github.com/PaulStoffregen/cores/blob/ddb23fa5d97dac763bc06e11b9b41f026bd51f0a/teensy4/bootdata.c#L39 const flexspi_nor_config_t qspiflash_config = { + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, + .blockSize = 0x00010000, + .isUniformBlockSize = false, .memConfig = { .tag = FLEXSPI_CFG_BLK_TAG, .version = FLEXSPI_CFG_BLK_VERSION, .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, - .csHoldTime = 1u, - .csSetupTime = 2u, - // Enable DDR mode, Wordaddressable, Safe configuration, Differential clock + .csHoldTime = 3u, + .csSetupTime = 3u, + + .busyOffset = 0u, // Status bit 0 indicates busy. + .busyBitPolarity = 0u, // Busy when the bit is 1. + + .deviceModeCfgEnable = 1u, + .deviceModeType = kDeviceConfigCmdType_QuadEnable, + .deviceModeSeq = { + .seqId = 4u, + .seqNum = 1u, + }, + .deviceModeArg = 0x40, .deviceType = kFlexSpiDeviceType_SerialNOR, .sflashPadType = kSerialFlash_4Pads, - .serialClkFreq = kFlexSpiSerialClk_60MHz, // 03 + .serialClkFreq = kFlexSpiSerialClk_60MHz, .sflashA1Size = FLASH_SIZE, .lookupTable = { // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) - // (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | - // FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) - // Read LUTs - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), - FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), - 0, - 0, - - 0x24040405, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000406, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x08180420, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x081804D8, - 0, - 0, - 0, - - 0x08180402, - 0x00002004, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000460, + // The high 16 bits is command 1 and the low are command 0. + // Within a command, the top 6 bits are the opcode, the next two are the number + // of pads and then last byte is the operand. The operand's meaning changes + // per opcode. + + // Indices with ROM should always have the same function because the ROM + // bootloader uses it. + + // 0: ROM: Read LUTs + // Quad version + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB /* the command to send */, + RADDR_SDR, FLEXSPI_4PAD, 24 /* bits to transmit */), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 6 /* 6 dummy cycles, 2 for M7-0 and 4 dummy */, + READ_SDR, FLEXSPI_4PAD, 0x04), + // Single fast read version, good for debugging. + // FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x0B /* the command to send */, + // RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + // FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 8 /* 8 dummy clocks */, + // READ_SDR, FLEXSPI_1PAD, 0x04), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 1: ROM: Read status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05 /* the command to send */, + READ_SDR, FLEXSPI_1PAD, 0x02), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 2: Empty + EMPTY_SEQUENCE, + + // 3: ROM: Write Enable + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06 /* the command to send */, + STOP, FLEXSPI_1PAD, 0x00), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 4: Config: Write Status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x01 /* the command to send */, + WRITE_SDR, FLEXSPI_1PAD, 0x01), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 5: ROM: Erase Sector + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 6: Empty + EMPTY_SEQUENCE, + + // 7: Empty + EMPTY_SEQUENCE, + + // 8: Block Erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xD8 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 9: ROM: Page program + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + + FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04 /* data out */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 10: Empty + EMPTY_SEQUENCE, + + // 11: ROM: Chip erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60 /* the command to send */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 12: Empty + EMPTY_SEQUENCE, + + // 13: ROM: Read SFDP + EMPTY_SEQUENCE, + + // 14: ROM: Restore no cmd + EMPTY_SEQUENCE, + + // 15: ROM: Dummy + EMPTY_SEQUENCE }, }, - .pageSize = 256u, - .sectorSize = 4u * 1024u, - .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, - .blockSize = 0x00010000, - .isUniformBlockSize = false, }; diff --git a/ports/mimxrt10xx/boards/metro_m7_1011/board.c b/ports/mimxrt10xx/boards/metro_m7_1011/board.c new file mode 100644 index 000000000..ed543e1b0 --- /dev/null +++ b/ports/mimxrt10xx/boards/metro_m7_1011/board.c @@ -0,0 +1,52 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries + * Copyright (c) 2019 Artur Pacholec + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" +#include "mpconfigboard.h" +#include "shared-bindings/microcontroller/Pin.h" + +void board_init(void) { + // SWD Pins + common_hal_never_reset_pin(&pin_GPIO_AD_13);//SWDIO + common_hal_never_reset_pin(&pin_GPIO_AD_12);//SWCLK + + // FLEX flash + common_hal_never_reset_pin(&pin_GPIO_SD_12); + common_hal_never_reset_pin(&pin_GPIO_SD_11); + common_hal_never_reset_pin(&pin_GPIO_SD_10); + common_hal_never_reset_pin(&pin_GPIO_SD_09); + common_hal_never_reset_pin(&pin_GPIO_SD_08); + common_hal_never_reset_pin(&pin_GPIO_SD_07); + common_hal_never_reset_pin(&pin_GPIO_SD_06); +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { +} diff --git a/ports/mimxrt10xx/boards/metro_m7_1011/flash_config.c b/ports/mimxrt10xx/boards/metro_m7_1011/flash_config.c new file mode 100644 index 000000000..30ce67523 --- /dev/null +++ b/ports/mimxrt10xx/boards/metro_m7_1011/flash_config.c @@ -0,0 +1,179 @@ +/* + * Copyright 2017 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include "fsl_flexspi_nor_boot.h" +#include "boards/board.h" + + +__attribute__((section(".boot_hdr.ivt"))) +/************************************* + * IVT Data + *************************************/ +const ivt image_vector_table = { + IVT_HEADER, /* IVT Header */ + IMAGE_ENTRY_ADDRESS, /* Image Entry Function */ + IVT_RSVD, /* Reserved = 0 */ + (uint32_t)DCD_ADDRESS, /* Address where DCD information is stored */ + (uint32_t)BOOT_DATA_ADDRESS, /* Address where BOOT Data Structure is stored */ + (uint32_t)&image_vector_table, /* Pointer to IVT Self (absolute address */ + (uint32_t)CSF_ADDRESS, /* Address where CSF file is stored */ + IVT_RSVD /* Reserved = 0 */ +}; + +__attribute__((section(".boot_hdr.boot_data"))) +/************************************* + * Boot Data + *************************************/ +const BOOT_DATA_T boot_data = { + FLASH_BASE, /* boot start location */ + FLASH_SIZE, /* size */ + PLUGIN_FLAG, /* Plugin flag*/ + 0xFFFFFFFF /* empty - extra data word */ +}; + +// Config for W25Q16JV with QSPI routed. +__attribute__((section(".boot_hdr.conf"))) +const flexspi_nor_config_t qspiflash_config = { + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, + .blockSize = 0x00010000, + .isUniformBlockSize = false, + .memConfig = + { + .tag = FLEXSPI_CFG_BLK_TAG, + .version = FLEXSPI_CFG_BLK_VERSION, + .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, + .csHoldTime = 3u, + .csSetupTime = 3u, + + .busyOffset = 0u, // Status bit 0 indicates busy. + .busyBitPolarity = 0u, // Busy when the bit is 1. + + .deviceModeCfgEnable = 1u, + .deviceModeType = kDeviceConfigCmdType_QuadEnable, + .deviceModeSeq = { + .seqId = 4u, + .seqNum = 1u, + }, + .deviceModeArg = 0x0200, + .configCmdEnable = 1u, + .configModeType[0] = kDeviceConfigCmdType_Generic, + .configCmdSeqs[0] = { + .seqId = 2u, + .seqNum = 1u, + }, + .deviceType = kFlexSpiDeviceType_SerialNOR, + .sflashPadType = kSerialFlash_4Pads, + .serialClkFreq = kFlexSpiSerialClk_60MHz, + .sflashA1Size = FLASH_SIZE, + .lookupTable = + { + // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) + // The high 16 bits is command 1 and the low are command 0. + // Within a command, the top 6 bits are the opcode, the next two are the number + // of pads and then last byte is the operand. The operand's meaning changes + // per opcode. + + // Indices with ROM should always have the same function because the ROM + // bootloader uses it. + + // 0: ROM: Read LUTs + // Quad version + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB /* the command to send */, + RADDR_SDR, FLEXSPI_4PAD, 24 /* bits to transmit */), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 6 /* 6 dummy cycles, 2 for M7-0 and 4 dummy */, + READ_SDR, FLEXSPI_4PAD, 0x04), + // Single fast read version, good for debugging. + // FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x0B /* the command to send */, + // RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + // FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 8 /* 8 dummy clocks */, + // READ_SDR, FLEXSPI_1PAD, 0x04), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 1: ROM: Read status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05 /* the command to send */, + READ_SDR, FLEXSPI_1PAD, 0x02), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 2: Empty + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x35 /* the command to send */, + DUMMY_SDR, FLEXSPI_1PAD, 8), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 3: ROM: Write Enable + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06 /* the command to send */, + STOP, FLEXSPI_1PAD, 0x00), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 4: Config: Write Status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x01 /* the command to send */, + WRITE_SDR, FLEXSPI_1PAD, 0x02), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 5: ROM: Erase Sector + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 6: Empty + EMPTY_SEQUENCE, + + // 7: Empty + EMPTY_SEQUENCE, + + // 8: Block Erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xD8 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 9: ROM: Page program + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + + FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04 /* data out */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 10: Empty + EMPTY_SEQUENCE, + + // 11: ROM: Chip erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60 /* the command to send */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 12: Empty + EMPTY_SEQUENCE, + + // 13: ROM: Read SFDP + EMPTY_SEQUENCE, + + // 14: ROM: Restore no cmd + EMPTY_SEQUENCE, + + // 15: ROM: Dummy + EMPTY_SEQUENCE + }, + }, +}; diff --git a/ports/mimxrt10xx/boards/metro_m7_1011/mpconfigboard.h b/ports/mimxrt10xx/boards/metro_m7_1011/mpconfigboard.h new file mode 100644 index 000000000..b11edb18b --- /dev/null +++ b/ports/mimxrt10xx/boards/metro_m7_1011/mpconfigboard.h @@ -0,0 +1,20 @@ +#define MICROPY_HW_BOARD_NAME "Metro MIMXRT1011" +#define MICROPY_HW_MCU_NAME "IMXRT1011DAE5A" + +#define MICROPY_HW_NEOPIXEL (&pin_GPIO_00) + +// If you change this, then make sure to update the linker scripts as well to +// make sure you don't overwrite code +#define CIRCUITPY_INTERNAL_NVM_SIZE 0 + +#define BOARD_FLASH_SIZE (2 * 1024 * 1024) + +#define DEFAULT_I2C_BUS_SCL (&pin_GPIO_02) +#define DEFAULT_I2C_BUS_SDA (&pin_GPIO_01) + +#define DEFAULT_SPI_BUS_SCK (&pin_GPIO_AD_06) +#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO_AD_04) +#define DEFAULT_SPI_BUS_MISO (&pin_GPIO_AD_03) + +#define DEFAULT_UART_BUS_RX (&pin_GPIO_09) +#define DEFAULT_UART_BUS_TX (&pin_GPIO_10) diff --git a/ports/mimxrt10xx/boards/metro_m7_1011/mpconfigboard.mk b/ports/mimxrt10xx/boards/metro_m7_1011/mpconfigboard.mk new file mode 100644 index 000000000..1a3f7e766 --- /dev/null +++ b/ports/mimxrt10xx/boards/metro_m7_1011/mpconfigboard.mk @@ -0,0 +1,12 @@ +USB_VID = 0x239A +USB_PID = 0x80E2 +USB_PRODUCT = "Metro M7 1011" +USB_MANUFACTURER = "Adafruit" + +CHIP_VARIANT = MIMXRT1011DAE5A +CHIP_FAMILY = MIMXRT1011 +FLASH = W25Q16JV + +# Include these Python libraries in the firmware +FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_ESP32SPI +FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_Requests diff --git a/ports/mimxrt10xx/boards/metro_m7_1011/pins.c b/ports/mimxrt10xx/boards/metro_m7_1011/pins.c new file mode 100644 index 000000000..e88493413 --- /dev/null +++ b/ports/mimxrt10xx/boards/metro_m7_1011/pins.c @@ -0,0 +1,59 @@ +#include "shared-bindings/board/__init__.h" + +#include "boards/board.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + // Analog + { MP_OBJ_NEW_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_GPIO_AD_02) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO_AD_01) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO_AD_00) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO_AD_05) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_GPIO_AD_10) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_GPIO_AD_08) }, + + // Digital + { MP_OBJ_NEW_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_GPIO_09) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO_09) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_GPIO_10) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO_10) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_GPIO_13) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_GPIO_12) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_GPIO_SD_00) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_GPIO_SD_01) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_GPIO_SD_02) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_GPIO_11) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_GPIO_08) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_GPIO_07) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO_06) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_GPIO_05) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO_04) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D13),MP_ROM_PTR(&pin_GPIO_03) }, + + // ESP control + { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_CS), MP_ROM_PTR(&pin_GPIO_AD_14) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_GPIO0), MP_ROM_PTR(&pin_GPIO_SD_05) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_BUSY), MP_ROM_PTR(&pin_GPIO_AD_11) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_RESET), MP_ROM_PTR(&pin_GPIO_AD_07) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_TX), MP_ROM_PTR(&pin_GPIO_09) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_RX), MP_ROM_PTR(&pin_GPIO_10) }, + + // SPI + { MP_OBJ_NEW_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO_AD_06) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO_AD_03) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO_AD_04) }, + + // UART + { MP_OBJ_NEW_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO_10) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO_09) }, + + // I2C + { MP_OBJ_NEW_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO_01) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO_02) }, + + { MP_OBJ_NEW_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO_00) }, + + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, + { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, + { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/mimxrt10xx/boards/teensy40/flash_config.c b/ports/mimxrt10xx/boards/teensy40/flash_config.c index 426deb884..30ce67523 100644 --- a/ports/mimxrt10xx/boards/teensy40/flash_config.c +++ b/ports/mimxrt10xx/boards/teensy40/flash_config.c @@ -6,12 +6,8 @@ */ #include "fsl_flexspi_nor_boot.h" -#include "fsl_flexspi_nor_config.h" +#include "boards/board.h" -/* Component ID definition, used by tools. */ -#ifndef FSL_COMPONENT_ID -#define FSL_COMPONENT_ID "platform.drivers.xip_device" -#endif __attribute__((section(".boot_hdr.ivt"))) /************************************* @@ -39,88 +35,145 @@ const BOOT_DATA_T boot_data = { 0xFFFFFFFF /* empty - extra data word */ }; +// Config for W25Q16JV with QSPI routed. __attribute__((section(".boot_hdr.conf"))) -// Values copied from https://github.com/PaulStoffregen/cores/blob/ddb23fa5d97dac763bc06e11b9b41f026bd51f0a/teensy4/bootdata.c#L39 const flexspi_nor_config_t qspiflash_config = { + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, + .blockSize = 0x00010000, + .isUniformBlockSize = false, .memConfig = { .tag = FLEXSPI_CFG_BLK_TAG, .version = FLEXSPI_CFG_BLK_VERSION, .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, - .csHoldTime = 1u, - .csSetupTime = 2u, - // Enable DDR mode, Wordaddressable, Safe configuration, Differential clock + .csHoldTime = 3u, + .csSetupTime = 3u, + + .busyOffset = 0u, // Status bit 0 indicates busy. + .busyBitPolarity = 0u, // Busy when the bit is 1. + + .deviceModeCfgEnable = 1u, + .deviceModeType = kDeviceConfigCmdType_QuadEnable, + .deviceModeSeq = { + .seqId = 4u, + .seqNum = 1u, + }, + .deviceModeArg = 0x0200, + .configCmdEnable = 1u, + .configModeType[0] = kDeviceConfigCmdType_Generic, + .configCmdSeqs[0] = { + .seqId = 2u, + .seqNum = 1u, + }, .deviceType = kFlexSpiDeviceType_SerialNOR, .sflashPadType = kSerialFlash_4Pads, - .serialClkFreq = kFlexSpiSerialClk_60MHz, // 03 + .serialClkFreq = kFlexSpiSerialClk_60MHz, .sflashA1Size = FLASH_SIZE, .lookupTable = { // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) - // (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | - // FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) - // Read LUTs - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), - FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), - 0, - 0, - - 0x24040405, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000406, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x08180420, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x081804D8, - 0, - 0, - 0, - - 0x08180402, - 0x00002004, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000460, + // The high 16 bits is command 1 and the low are command 0. + // Within a command, the top 6 bits are the opcode, the next two are the number + // of pads and then last byte is the operand. The operand's meaning changes + // per opcode. + + // Indices with ROM should always have the same function because the ROM + // bootloader uses it. + + // 0: ROM: Read LUTs + // Quad version + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB /* the command to send */, + RADDR_SDR, FLEXSPI_4PAD, 24 /* bits to transmit */), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 6 /* 6 dummy cycles, 2 for M7-0 and 4 dummy */, + READ_SDR, FLEXSPI_4PAD, 0x04), + // Single fast read version, good for debugging. + // FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x0B /* the command to send */, + // RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + // FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 8 /* 8 dummy clocks */, + // READ_SDR, FLEXSPI_1PAD, 0x04), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 1: ROM: Read status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05 /* the command to send */, + READ_SDR, FLEXSPI_1PAD, 0x02), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 2: Empty + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x35 /* the command to send */, + DUMMY_SDR, FLEXSPI_1PAD, 8), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 3: ROM: Write Enable + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06 /* the command to send */, + STOP, FLEXSPI_1PAD, 0x00), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 4: Config: Write Status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x01 /* the command to send */, + WRITE_SDR, FLEXSPI_1PAD, 0x02), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 5: ROM: Erase Sector + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 6: Empty + EMPTY_SEQUENCE, + + // 7: Empty + EMPTY_SEQUENCE, + + // 8: Block Erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xD8 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 9: ROM: Page program + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + + FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04 /* data out */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 10: Empty + EMPTY_SEQUENCE, + + // 11: ROM: Chip erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60 /* the command to send */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 12: Empty + EMPTY_SEQUENCE, + + // 13: ROM: Read SFDP + EMPTY_SEQUENCE, + + // 14: ROM: Restore no cmd + EMPTY_SEQUENCE, + + // 15: ROM: Dummy + EMPTY_SEQUENCE }, }, - .pageSize = 256u, - .sectorSize = 4u * 1024u, - .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, - .blockSize = 0x00010000, - .isUniformBlockSize = false, }; diff --git a/ports/mimxrt10xx/boards/teensy41/flash_config.c b/ports/mimxrt10xx/boards/teensy41/flash_config.c index 426deb884..7b2bfb768 100644 --- a/ports/mimxrt10xx/boards/teensy41/flash_config.c +++ b/ports/mimxrt10xx/boards/teensy41/flash_config.c @@ -6,12 +6,8 @@ */ #include "fsl_flexspi_nor_boot.h" -#include "fsl_flexspi_nor_config.h" +#include "boards/board.h" -/* Component ID definition, used by tools. */ -#ifndef FSL_COMPONENT_ID -#define FSL_COMPONENT_ID "platform.drivers.xip_device" -#endif __attribute__((section(".boot_hdr.ivt"))) /************************************* @@ -39,88 +35,135 @@ const BOOT_DATA_T boot_data = { 0xFFFFFFFF /* empty - extra data word */ }; +// Config for W25Q64JV with QSPI routed. __attribute__((section(".boot_hdr.conf"))) -// Values copied from https://github.com/PaulStoffregen/cores/blob/ddb23fa5d97dac763bc06e11b9b41f026bd51f0a/teensy4/bootdata.c#L39 const flexspi_nor_config_t qspiflash_config = { + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, + .blockSize = 0x00010000, + .isUniformBlockSize = false, .memConfig = { .tag = FLEXSPI_CFG_BLK_TAG, .version = FLEXSPI_CFG_BLK_VERSION, .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, - .csHoldTime = 1u, - .csSetupTime = 2u, - // Enable DDR mode, Wordaddressable, Safe configuration, Differential clock + .csHoldTime = 3u, + .csSetupTime = 3u, + + .busyOffset = 0u, // Status bit 0 indicates busy. + .busyBitPolarity = 0u, // Busy when the bit is 1. + + .deviceModeCfgEnable = 1u, + .deviceModeType = kDeviceConfigCmdType_QuadEnable, + .deviceModeSeq = { + .seqId = 4u, + .seqNum = 1u, + }, + .deviceModeArg = 0x02, .deviceType = kFlexSpiDeviceType_SerialNOR, .sflashPadType = kSerialFlash_4Pads, - .serialClkFreq = kFlexSpiSerialClk_60MHz, // 03 + .serialClkFreq = kFlexSpiSerialClk_60MHz, .sflashA1Size = FLASH_SIZE, .lookupTable = { // FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) - // (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | - // FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) - // Read LUTs - FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), - FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), - 0, - 0, - - 0x24040405, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000406, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x08180420, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x081804D8, - 0, - 0, - 0, - - 0x08180402, - 0x00002004, - 0, - 0, - - 0, - 0, - 0, - 0, - - 0x00000460, + // The high 16 bits is command 1 and the low are command 0. + // Within a command, the top 6 bits are the opcode, the next two are the number + // of pads and then last byte is the operand. The operand's meaning changes + // per opcode. + + // Indices with ROM should always have the same function because the ROM + // bootloader uses it. + + // 0: ROM: Read LUTs + // Quad version + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB /* the command to send */, + RADDR_SDR, FLEXSPI_4PAD, 24 /* bits to transmit */), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 6 /* 6 dummy cycles, 2 for M7-0 and 4 dummy */, + READ_SDR, FLEXSPI_4PAD, 0x04), + // Single fast read version, good for debugging. + // FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x0B /* the command to send */, + // RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + // FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_1PAD, 8 /* 8 dummy clocks */, + // READ_SDR, FLEXSPI_1PAD, 0x04), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 1: ROM: Read status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05 /* the command to send */, + READ_SDR, FLEXSPI_1PAD, 0x01), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 2: Empty + EMPTY_SEQUENCE, + + // 3: ROM: Write Enable + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06 /* the command to send */, + STOP, FLEXSPI_1PAD, 0x00), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 4: Config: Write Status + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x31 /* the command to send */, + WRITE_SDR, FLEXSPI_1PAD, 0x01), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 5: ROM: Erase Sector + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x20 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 6: Empty + EMPTY_SEQUENCE, + + // 7: Empty + EMPTY_SEQUENCE, + + // 8: Block Erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xD8 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 9: ROM: Page program + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x02 /* the command to send */, + RADDR_SDR, FLEXSPI_1PAD, 24 /* bits to transmit */), + + FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04 /* data out */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 10: Empty + EMPTY_SEQUENCE, + + // 11: ROM: Chip erase + SEQUENCE(FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60 /* the command to send */, + STOP, FLEXSPI_1PAD, 0), + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS, + TWO_EMPTY_STEPS), + + // 12: Empty + EMPTY_SEQUENCE, + + // 13: ROM: Read SFDP + EMPTY_SEQUENCE, + + // 14: ROM: Restore no cmd + EMPTY_SEQUENCE, + + // 15: ROM: Dummy + EMPTY_SEQUENCE }, }, - .pageSize = 256u, - .sectorSize = 4u * 1024u, - .ipcmdSerialClkFreq = kFlexSpiSerialClk_30MHz, - .blockSize = 0x00010000, - .isUniformBlockSize = false, }; diff --git a/ports/mimxrt10xx/linking/common.ld b/ports/mimxrt10xx/linking/common.ld index 90fc78093..720361aa0 100644 --- a/ports/mimxrt10xx/linking/common.ld +++ b/ports/mimxrt10xx/linking/common.ld @@ -62,7 +62,6 @@ SECTIONS KEEP(*(.isr_vector)) /* Startup code */ *(EXCLUDE_FILE( - *flexspi_nor_flash_ops.o *fsl_flexspi.o ) .text*) /* .text* sections (code) */ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ @@ -84,7 +83,6 @@ SECTIONS { . = ALIGN(4); *(.data*) /* .data* sections */ - *flexspi_nor_flash_ops.o(.text*) *fsl_flexspi.o(.text*) . = ALIGN(4); } > OCRAM AT> FLASH_FIRMWARE @@ -110,7 +108,6 @@ SECTIONS .itcm : { . = ALIGN(4); - *(.itcm.*) . = ALIGN(4); diff --git a/ports/mimxrt10xx/supervisor/flexspi_nor_flash_ops.c b/ports/mimxrt10xx/supervisor/flexspi_nor_flash_ops.c index 28d5115ac..353ba3176 100644 --- a/ports/mimxrt10xx/supervisor/flexspi_nor_flash_ops.c +++ b/ports/mimxrt10xx/supervisor/flexspi_nor_flash_ops.c @@ -9,23 +9,10 @@ #include "fsl_flexspi.h" #include "internal_flash.h" +#include "boards/board.h" +#include "supervisor/linker.h" -#define FLASH_QUAD_ENABLE 0x02 -#define FLASH_BUSY_STATUS_POL 1 -#define FLASH_BUSY_STATUS_OFFSET 0 - -static inline void flexspi_clock_init(void) -{ - /* Switch to PLL2 for XIP to avoid hardfault during re-initialize clock. */ - CLOCK_InitSysPfd(kCLOCK_Pfd2, 24); /* Set PLL2 PFD2 clock 396MHZ. */ - CLOCK_SetMux(kCLOCK_FlexspiMux, 0x2); /* Choose PLL2 PFD2 clock as flexspi source clock. */ - CLOCK_SetDiv(kCLOCK_FlexspiDiv, 2); /* flexspi clock 133M. */ -} - -extern flexspi_device_config_t deviceconfig; -extern const uint32_t customLUT[CUSTOM_LUT_LENGTH]; - -status_t flexspi_nor_write_enable(FLEXSPI_Type *base, uint32_t baseAddr) +status_t PLACE_IN_ITCM(flexspi_nor_write_enable)(FLEXSPI_Type *base, uint32_t baseAddr) { flexspi_transfer_t flashXfer; status_t status; @@ -35,14 +22,14 @@ status_t flexspi_nor_write_enable(FLEXSPI_Type *base, uint32_t baseAddr) flashXfer.port = kFLEXSPI_PortA1; flashXfer.cmdType = kFLEXSPI_Command; flashXfer.SeqNumber = 1; - flashXfer.seqIndex = NOR_CMD_LUT_SEQ_IDX_WRITEENABLE; + flashXfer.seqIndex = ROM_INDEX_WRITEENABLE; status = FLEXSPI_TransferBlocking(base, &flashXfer); return status; } -status_t flexspi_nor_wait_bus_busy(FLEXSPI_Type *base) +status_t PLACE_IN_ITCM(flexspi_nor_wait_bus_busy)(FLEXSPI_Type *base) { /* Wait status ready. */ bool isBusy; @@ -54,7 +41,7 @@ status_t flexspi_nor_wait_bus_busy(FLEXSPI_Type *base) flashXfer.port = kFLEXSPI_PortA1; flashXfer.cmdType = kFLEXSPI_Read; flashXfer.SeqNumber = 1; - flashXfer.seqIndex = NOR_CMD_LUT_SEQ_IDX_READSTATUSREG; + flashXfer.seqIndex = ROM_INDEX_READSTATUSREG; flashXfer.data = &readValue; flashXfer.dataSize = 1; @@ -66,72 +53,15 @@ status_t flexspi_nor_wait_bus_busy(FLEXSPI_Type *base) { return status; } - if (FLASH_BUSY_STATUS_POL) - { - if (readValue & (1U << FLASH_BUSY_STATUS_OFFSET)) - { - isBusy = true; - } - else - { - isBusy = false; - } - } - else - { - if (readValue & (1U << FLASH_BUSY_STATUS_OFFSET)) - { - isBusy = false; - } - else - { - isBusy = true; - } - } - + size_t busyBit = readValue & (1U << qspiflash_config.memConfig.busyOffset); + isBusy = (qspiflash_config.memConfig.busyBitPolarity == 0 && busyBit != 0) || + (qspiflash_config.memConfig.busyBitPolarity == 1 && busyBit == 0); } while (isBusy); return status; } -status_t flexspi_nor_enable_quad_mode(FLEXSPI_Type *base) -{ - flexspi_transfer_t flashXfer; - status_t status; - uint32_t writeValue = FLASH_QUAD_ENABLE; - - /* Write enable */ - status = flexspi_nor_write_enable(base, 0); - - if (status != kStatus_Success) - { - return status; - } - - /* Enable quad mode. */ - flashXfer.deviceAddress = 0; - flashXfer.port = kFLEXSPI_PortA1; - flashXfer.cmdType = kFLEXSPI_Write; - flashXfer.SeqNumber = 1; - flashXfer.seqIndex = NOR_CMD_LUT_SEQ_IDX_WRITESTATUSREG; - flashXfer.data = &writeValue; - flashXfer.dataSize = 1; - - status = FLEXSPI_TransferBlocking(base, &flashXfer); - if (status != kStatus_Success) - { - return status; - } - - status = flexspi_nor_wait_bus_busy(base); - - /* Do software reset. */ - FLEXSPI_SoftwareReset(base); - - return status; -} - -status_t flexspi_nor_flash_erase_sector(FLEXSPI_Type *base, uint32_t address) +status_t PLACE_IN_ITCM(flexspi_nor_flash_erase_sector)(FLEXSPI_Type *base, uint32_t address) { status_t status; flexspi_transfer_t flashXfer; @@ -141,7 +71,7 @@ status_t flexspi_nor_flash_erase_sector(FLEXSPI_Type *base, uint32_t address) flashXfer.port = kFLEXSPI_PortA1; flashXfer.cmdType = kFLEXSPI_Command; flashXfer.SeqNumber = 1; - flashXfer.seqIndex = NOR_CMD_LUT_SEQ_IDX_WRITEENABLE; + flashXfer.seqIndex = ROM_INDEX_WRITEENABLE; status = FLEXSPI_TransferBlocking(base, &flashXfer); @@ -154,7 +84,7 @@ status_t flexspi_nor_flash_erase_sector(FLEXSPI_Type *base, uint32_t address) flashXfer.port = kFLEXSPI_PortA1; flashXfer.cmdType = kFLEXSPI_Command; flashXfer.SeqNumber = 1; - flashXfer.seqIndex = NOR_CMD_LUT_SEQ_IDX_ERASESECTOR; + flashXfer.seqIndex = ROM_INDEX_ERASESECTOR; status = FLEXSPI_TransferBlocking(base, &flashXfer); if (status != kStatus_Success) @@ -170,7 +100,7 @@ status_t flexspi_nor_flash_erase_sector(FLEXSPI_Type *base, uint32_t address) return status; } -status_t flexspi_nor_flash_program(FLEXSPI_Type *base, uint32_t dstAddr, const uint32_t *src, uint32_t length) +status_t PLACE_IN_ITCM(flexspi_nor_flash_page_program)(FLEXSPI_Type *base, uint32_t dstAddr, const uint32_t *src) { status_t status; flexspi_transfer_t flashXfer; @@ -188,48 +118,7 @@ status_t flexspi_nor_flash_program(FLEXSPI_Type *base, uint32_t dstAddr, const u flashXfer.port = kFLEXSPI_PortA1; flashXfer.cmdType = kFLEXSPI_Write; flashXfer.SeqNumber = 1; - flashXfer.seqIndex = NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD; - flashXfer.data = (uint32_t *)src; - flashXfer.dataSize = length; - status = FLEXSPI_TransferBlocking(base, &flashXfer); - - if (status != kStatus_Success) - { - return status; - } - - status = flexspi_nor_wait_bus_busy(base); - - /* Do software reset. */ -#if defined(FSL_FEATURE_SOC_OTFAD_COUNT) - base->AHBCR |= FLEXSPI_AHBCR_CLRAHBRXBUF_MASK | FLEXSPI_AHBCR_CLRAHBTXBUF_MASK; - base->AHBCR &= ~(FLEXSPI_AHBCR_CLRAHBRXBUF_MASK | FLEXSPI_AHBCR_CLRAHBTXBUF_MASK); -#else - FLEXSPI_SoftwareReset(base); -#endif - - return status; -} - -status_t flexspi_nor_flash_page_program(FLEXSPI_Type *base, uint32_t dstAddr, const uint32_t *src) -{ - status_t status; - flexspi_transfer_t flashXfer; - - /* Write enable */ - status = flexspi_nor_write_enable(base, dstAddr); - - if (status != kStatus_Success) - { - return status; - } - - /* Prepare page program command */ - flashXfer.deviceAddress = dstAddr; - flashXfer.port = kFLEXSPI_PortA1; - flashXfer.cmdType = kFLEXSPI_Write; - flashXfer.SeqNumber = 1; - flashXfer.seqIndex = NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD; + flashXfer.seqIndex = ROM_INDEX_PAGEPROGRAM; flashXfer.data = (uint32_t *)src; flashXfer.dataSize = FLASH_PAGE_SIZE; status = FLEXSPI_TransferBlocking(base, &flashXfer); @@ -251,92 +140,3 @@ status_t flexspi_nor_flash_page_program(FLEXSPI_Type *base, uint32_t dstAddr, co return status; } - -status_t flexspi_nor_get_vendor_id(FLEXSPI_Type *base, uint8_t *vendorId) -{ - uint32_t temp; - flexspi_transfer_t flashXfer; - flashXfer.deviceAddress = 0; - flashXfer.port = kFLEXSPI_PortA1; - flashXfer.cmdType = kFLEXSPI_Read; - flashXfer.SeqNumber = 1; - flashXfer.seqIndex = NOR_CMD_LUT_SEQ_IDX_READID; - flashXfer.data = &temp; - flashXfer.dataSize = 1; - - status_t status = FLEXSPI_TransferBlocking(base, &flashXfer); - - *vendorId = temp; - - /* Do software reset. */ -#if defined(FSL_FEATURE_SOC_OTFAD_COUNT) - base->AHBCR |= FLEXSPI_AHBCR_CLRAHBRXBUF_MASK | FLEXSPI_AHBCR_CLRAHBTXBUF_MASK; - base->AHBCR &= ~(FLEXSPI_AHBCR_CLRAHBRXBUF_MASK | FLEXSPI_AHBCR_CLRAHBTXBUF_MASK); -#else - FLEXSPI_SoftwareReset(base); -#endif - - return status; -} - -status_t flexspi_nor_erase_chip(FLEXSPI_Type *base) -{ - status_t status; - flexspi_transfer_t flashXfer; - - /* Write enable */ - status = flexspi_nor_write_enable(base, 0); - - if (status != kStatus_Success) - { - return status; - } - - flashXfer.deviceAddress = 0; - flashXfer.port = kFLEXSPI_PortA1; - flashXfer.cmdType = kFLEXSPI_Command; - flashXfer.SeqNumber = 1; - flashXfer.seqIndex = NOR_CMD_LUT_SEQ_IDX_ERASECHIP; - - status = FLEXSPI_TransferBlocking(base, &flashXfer); - - if (status != kStatus_Success) - { - return status; - } - - status = flexspi_nor_wait_bus_busy(base); - - return status; -} - -void flexspi_nor_flash_init(FLEXSPI_Type *base) -{ - flexspi_config_t config; - - flexspi_clock_init(); - - /*Get FLEXSPI default settings and configure the flexspi. */ - FLEXSPI_GetDefaultConfig(&config); - - /*Set AHB buffer size for reading data through AHB bus. */ - config.ahbConfig.enableAHBPrefetch = true; - config.ahbConfig.enableAHBBufferable = true; - config.ahbConfig.enableReadAddressOpt = true; - config.ahbConfig.enableAHBCachable = true; -#ifdef BOARD_USING_SECONDARY_QSPI_PINMUX - config.rxSampleClock = kFLEXSPI_ReadSampleClkLoopbackInternally; -#else - config.rxSampleClock = kFLEXSPI_ReadSampleClkLoopbackFromDqsPad; -#endif - FLEXSPI_Init(base, &config); - - /* Configure flash settings according to serial flash feature. */ - FLEXSPI_SetFlashConfig(base, &deviceconfig, kFLEXSPI_PortA1); - - /* Update LUT table. */ - FLEXSPI_UpdateLUT(base, 0, customLUT, CUSTOM_LUT_LENGTH); - - /* Do software reset. */ - FLEXSPI_SoftwareReset(base); -} diff --git a/ports/mimxrt10xx/supervisor/internal_flash.c b/ports/mimxrt10xx/supervisor/internal_flash.c index 09f44cced..e194cbed9 100644 --- a/ports/mimxrt10xx/supervisor/internal_flash.c +++ b/ports/mimxrt10xx/supervisor/internal_flash.c @@ -30,6 +30,7 @@ #include <string.h> #include <stdio.h> +#include "boards/board.h" #include "extmod/vfs.h" #include "extmod/vfs_fat.h" #include "py/mphal.h" @@ -50,125 +51,14 @@ extern uint32_t __fatfs_flash_length[]; uint8_t _flash_cache[SECTOR_SIZE] __attribute__((aligned(4))); uint32_t _flash_page_addr = NO_CACHE; -static bool init_done = false; - -flexspi_device_config_t deviceconfig = { - .flexspiRootClk = 133000000, - .flashSize = (BOARD_FLASH_SIZE / 1024), - .CSIntervalUnit = kFLEXSPI_CsIntervalUnit1SckCycle, - .CSInterval = 2, - .CSHoldTime = 3, - .CSSetupTime = 3, - .dataValidTime = 0, - .columnspace = 0, - .enableWordAddress = 0, - .AWRSeqIndex = 0, - .AWRSeqNumber = 0, - .ARDSeqIndex = NOR_CMD_LUT_SEQ_IDX_READ_FAST_QUAD, - .ARDSeqNumber = 1, - .AHBWriteWaitUnit = kFLEXSPI_AhbWriteWaitUnit2AhbCycle, - .AHBWriteWaitInterval = 0, -}; - -const uint32_t customLUT[CUSTOM_LUT_LENGTH] = { - /* Normal read mode -SDR */ - /* Normal read mode -SDR */ - [4 * NOR_CMD_LUT_SEQ_IDX_READ_NORMAL] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x03, kFLEXSPI_Command_RADDR_SDR, kFLEXSPI_1PAD, 0x18), - [4 * NOR_CMD_LUT_SEQ_IDX_READ_NORMAL + 1] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_READ_SDR, kFLEXSPI_1PAD, 0x04, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0), - - /* Fast read mode - SDR */ - [4 * NOR_CMD_LUT_SEQ_IDX_READ_FAST] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x0B, kFLEXSPI_Command_RADDR_SDR, kFLEXSPI_1PAD, 0x18), - [4 * NOR_CMD_LUT_SEQ_IDX_READ_FAST + 1] = FLEXSPI_LUT_SEQ( - kFLEXSPI_Command_DUMMY_SDR, kFLEXSPI_1PAD, 0x08, kFLEXSPI_Command_READ_SDR, kFLEXSPI_1PAD, 0x04), - - /* Fast read quad mode - SDR */ - [4 * NOR_CMD_LUT_SEQ_IDX_READ_FAST_QUAD] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0xEB, kFLEXSPI_Command_RADDR_SDR, kFLEXSPI_4PAD, 0x18), - [4 * NOR_CMD_LUT_SEQ_IDX_READ_FAST_QUAD + 1] = FLEXSPI_LUT_SEQ( - kFLEXSPI_Command_DUMMY_SDR, kFLEXSPI_4PAD, 0x06, kFLEXSPI_Command_READ_SDR, kFLEXSPI_4PAD, 0x04), - - /* Read extend parameters */ - [4 * NOR_CMD_LUT_SEQ_IDX_READSTATUS] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x81, kFLEXSPI_Command_READ_SDR, kFLEXSPI_1PAD, 0x04), - - /* Write Enable */ - [4 * NOR_CMD_LUT_SEQ_IDX_WRITEENABLE] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x06, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0), - - /* Erase Sector */ - [4 * NOR_CMD_LUT_SEQ_IDX_ERASESECTOR] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x20, kFLEXSPI_Command_RADDR_SDR, kFLEXSPI_1PAD, 0x18), - - /* Page Program - single mode */ - [4 * NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_SINGLE] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x02, kFLEXSPI_Command_RADDR_SDR, kFLEXSPI_1PAD, 0x18), - [4 * NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_SINGLE + 1] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_WRITE_SDR, kFLEXSPI_1PAD, 0x04, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0), - - /* Page Program - quad mode */ - [4 * NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x32, kFLEXSPI_Command_RADDR_SDR, kFLEXSPI_1PAD, 0x18), - [4 * NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD + 1] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_WRITE_SDR, kFLEXSPI_4PAD, 0x04, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0), - - /* Read ID */ - [4 * NOR_CMD_LUT_SEQ_IDX_READID] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x9F, kFLEXSPI_Command_READ_SDR, kFLEXSPI_1PAD, 0x04), - - /* Enable Quad mode */ - [4 * NOR_CMD_LUT_SEQ_IDX_WRITESTATUSREG] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x31, kFLEXSPI_Command_WRITE_SDR, kFLEXSPI_1PAD, 0x04), - - /* Read status register */ - [4 * NOR_CMD_LUT_SEQ_IDX_READSTATUSREG] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x05, kFLEXSPI_Command_READ_SDR, kFLEXSPI_1PAD, 0x04), - - /* Erase whole chip */ - [4 * NOR_CMD_LUT_SEQ_IDX_ERASECHIP] = - FLEXSPI_LUT_SEQ(kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0xC7, kFLEXSPI_Command_STOP, kFLEXSPI_1PAD, 0), -}; extern status_t flexspi_nor_flash_erase_sector(FLEXSPI_Type *base, uint32_t address); extern status_t flexspi_nor_flash_page_program(FLEXSPI_Type *base, uint32_t dstAddr, const uint32_t *src); -extern status_t flexspi_nor_get_vendor_id(FLEXSPI_Type *base, uint8_t *vendorId); extern status_t flexspi_nor_enable_quad_mode(FLEXSPI_Type *base); -extern status_t flexspi_nor_erase_chip(FLEXSPI_Type *base); -extern void flexspi_nor_flash_init(FLEXSPI_Type *base); - -void supervisor_flash_init(void) { - if (init_done) - return; - - SCB_DisableDCache(); - - status_t status; - uint8_t vendorID = 0; - - flexspi_nor_flash_init(FLEXSPI); - - /* Get vendor ID. */ - status = flexspi_nor_get_vendor_id(FLEXSPI, &vendorID); - if (status != kStatus_Success) { - printf("flexspi_nor_get_vendor_id fail %ld\r\n", status); - return; - } - - /* Enter quad mode. */ - __disable_irq(); - status = flexspi_nor_enable_quad_mode(FLEXSPI); - if (status != kStatus_Success) - { - printf("flexspi_nor_enable_quad_mode fail %ld\r\n", status); - return; - } - __enable_irq(); - - SCB_EnableDCache(); - init_done = true; +void PLACE_IN_ITCM(supervisor_flash_init)(void) { + // Update the LUT to make sure all entries are available. + FLEXSPI_UpdateLUT(FLEXSPI, 0, (const uint32_t*) &qspiflash_config.memConfig.lookupTable, 64); } static inline uint32_t lba2addr(uint32_t block) { @@ -183,7 +73,7 @@ uint32_t supervisor_flash_get_block_count(void) { return CIRCUITPY_INTERNAL_FLASH_FILESYSTEM_SIZE / FILESYSTEM_BLOCK_SIZE; } -void port_internal_flash_flush(void) { +void PLACE_IN_ITCM(port_internal_flash_flush)(void) { if (_flash_page_addr == NO_CACHE) return; status_t status; @@ -211,6 +101,7 @@ void port_internal_flash_flush(void) { DCACHE_CleanInvalidateByRange(_flash_page_addr, SECTOR_SIZE); } + _flash_page_addr = NO_CACHE; } mp_uint_t supervisor_flash_read_blocks(uint8_t *dest, uint32_t block, uint32_t num_blocks) { diff --git a/ports/mimxrt10xx/supervisor/internal_flash.h b/ports/mimxrt10xx/supervisor/internal_flash.h index daee66620..ae33fd134 100644 --- a/ports/mimxrt10xx/supervisor/internal_flash.h +++ b/ports/mimxrt10xx/supervisor/internal_flash.h @@ -34,20 +34,11 @@ #define INTERNAL_FLASH_SYSTICK_MASK (0x1ff) // 512ms #define INTERNAL_FLASH_IDLE_TICK(tick) (((tick) & INTERNAL_FLASH_SYSTICK_MASK) == 2) -#define CUSTOM_LUT_LENGTH 60 #define FLASH_PAGE_SIZE 256 -#define NOR_CMD_LUT_SEQ_IDX_READ_NORMAL 7 -#define NOR_CMD_LUT_SEQ_IDX_READ_FAST 13 -#define NOR_CMD_LUT_SEQ_IDX_READ_FAST_QUAD 0 -#define NOR_CMD_LUT_SEQ_IDX_READSTATUS 1 -#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE 2 -#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 3 -#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_SINGLE 6 -#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD 4 -#define NOR_CMD_LUT_SEQ_IDX_READID 8 -#define NOR_CMD_LUT_SEQ_IDX_WRITESTATUSREG 9 -#define NOR_CMD_LUT_SEQ_IDX_READSTATUSREG 12 -#define NOR_CMD_LUT_SEQ_IDX_ERASECHIP 5 +#define ROM_INDEX_WRITEENABLE 3 +#define ROM_INDEX_ERASESECTOR 5 +#define ROM_INDEX_PAGEPROGRAM 9 +#define ROM_INDEX_READSTATUSREG 1 #endif // MICROPY_INCLUDED_MIMXRT10XX_INTERNAL_FLASH_H diff --git a/ports/mimxrt10xx/supervisor/port.c b/ports/mimxrt10xx/supervisor/port.c index 38cf16a49..e3fef373f 100644 --- a/ports/mimxrt10xx/supervisor/port.c +++ b/ports/mimxrt10xx/supervisor/port.c @@ -72,7 +72,8 @@ #define NO_EXECUTION 1 #define EXECUTION 0 -// Shareable if the memory system manages coherency. +// Shareable if the memory system manages coherency. This means shared between memory bus masters, +// not just CPUs. #define NOT_SHAREABLE 0 #define SHAREABLE 1 @@ -207,9 +208,11 @@ __attribute__((used, naked)) void Reset_Handler(void) { MPU->RBAR = ARM_MPU_RBAR(13, 0x20000000U); MPU->RASR = ARM_MPU_RASR(EXECUTION, ARM_MPU_AP_FULL, NORMAL, NOT_SHAREABLE, CACHEABLE, BUFFERABLE, NO_SUBREGIONS, ARM_MPU_REGION_SIZE_32KB); - // This is OCRAM. + // This is OCRAM. We mark it as shareable so that it isn't cached. This makes USB work at the + // cost of 1/4 speed OCRAM accesses. It will leave more room for caching data from the flash + // too which might be a net win. MPU->RBAR = ARM_MPU_RBAR(14, 0x20200000U); - MPU->RASR = ARM_MPU_RASR(EXECUTION, ARM_MPU_AP_FULL, NORMAL, NOT_SHAREABLE, CACHEABLE, BUFFERABLE, NO_SUBREGIONS, ARM_MPU_REGION_SIZE_512KB); + MPU->RASR = ARM_MPU_RASR(EXECUTION, ARM_MPU_AP_FULL, NORMAL, SHAREABLE, CACHEABLE, BUFFERABLE, NO_SUBREGIONS, ARM_MPU_REGION_SIZE_512KB); // We steal 64k from FlexRAM for ITCM and DTCM so disable those memory regions here. MPU->RBAR = ARM_MPU_RBAR(15, 0x20280000U); @@ -322,19 +325,22 @@ void reset_cpu(void) { reset(); } -supervisor_allocation* port_fixed_stack(void) { - return NULL; -} - extern uint32_t _ld_heap_start, _ld_heap_end, _ld_stack_top, _ld_stack_bottom; uint32_t *port_stack_get_limit(void) { - return &_ld_heap_start; + return &_ld_stack_bottom; } uint32_t *port_stack_get_top(void) { return &_ld_stack_top; } +supervisor_allocation _fixed_stack; +supervisor_allocation* port_fixed_stack(void) { + _fixed_stack.ptr = port_stack_get_limit(); + _fixed_stack.length = (port_stack_get_top() - port_stack_get_limit()) * sizeof(uint32_t); + return &_fixed_stack; +} + uint32_t *port_heap_get_bottom(void) { return &_ld_heap_start; } diff --git a/ports/mimxrt10xx/supervisor/usb.c b/ports/mimxrt10xx/supervisor/usb.c index af259405a..91135289c 100644 --- a/ports/mimxrt10xx/supervisor/usb.c +++ b/ports/mimxrt10xx/supervisor/usb.c @@ -50,10 +50,6 @@ void init_usb_hardware(void) { phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK); phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06); usb_phy->TX = phytx; - - // Temporarily disable the data cache until we can sort out all of the spots in TinyUSB that - // need the cache invalidated or cleaned. - SCB_DisableDCache(); } void USB_OTG1_IRQHandler(void) { diff --git a/ports/nrf/common-hal/_bleio/__init__.c b/ports/nrf/common-hal/_bleio/__init__.c index 496c9429f..5293f7ad1 100644 --- a/ports/nrf/common-hal/_bleio/__init__.c +++ b/ports/nrf/common-hal/_bleio/__init__.c @@ -50,7 +50,7 @@ void check_nrf_error(uint32_t err_code) { mp_raise_msg(&mp_type_TimeoutError, NULL); return; case BLE_ERROR_INVALID_CONN_HANDLE: - mp_raise_bleio_ConnectionError(translate("Not connected")); + mp_raise_ConnectionError(translate("Not connected")); return; default: mp_raise_bleio_BluetoothError(translate("Unknown soft device error: %04x"), err_code); @@ -115,7 +115,7 @@ bleio_adapter_obj_t common_hal_bleio_adapter_obj = { void common_hal_bleio_check_connected(uint16_t conn_handle) { if (conn_handle == BLE_CONN_HANDLE_INVALID) { - mp_raise_bleio_ConnectionError(translate("Not connected")); + mp_raise_ConnectionError(translate("Not connected")); } } diff --git a/shared-bindings/_bleio/CharacteristicBuffer.c b/shared-bindings/_bleio/CharacteristicBuffer.c index 7bcbc807e..4d6c836c1 100644 --- a/shared-bindings/_bleio/CharacteristicBuffer.c +++ b/shared-bindings/_bleio/CharacteristicBuffer.c @@ -37,7 +37,7 @@ STATIC void raise_error_if_not_connected(bleio_characteristic_buffer_obj_t *self) { if (!common_hal_bleio_characteristic_buffer_connected(self)) { - mp_raise_bleio_ConnectionError(translate("Not connected")); + mp_raise_ConnectionError(translate("Not connected")); } } diff --git a/shared-bindings/_bleio/Connection.c b/shared-bindings/_bleio/Connection.c index b5eeaa906..fe82af098 100644 --- a/shared-bindings/_bleio/Connection.c +++ b/shared-bindings/_bleio/Connection.c @@ -63,7 +63,7 @@ void bleio_connection_ensure_connected(bleio_connection_obj_t *self) { if (!common_hal_bleio_connection_get_connected(self)) { - mp_raise_bleio_ConnectionError(translate("Connection has been disconnected and can no longer be used. Create a new connection.")); + mp_raise_ConnectionError(translate("Connection has been disconnected and can no longer be used. Create a new connection.")); } } diff --git a/shared-bindings/_bleio/PacketBuffer.c b/shared-bindings/_bleio/PacketBuffer.c index 8c8970939..f2a3cbce0 100644 --- a/shared-bindings/_bleio/PacketBuffer.c +++ b/shared-bindings/_bleio/PacketBuffer.c @@ -161,7 +161,7 @@ STATIC mp_obj_t bleio_packet_buffer_write(mp_uint_t n_args, const mp_obj_t *pos_ // gatts write events, which may not have been sent yet. // // IDEAL: - // mp_raise_bleio_ConnectionError(translate("Not connected")); + // mp_raise_ConnectionError(translate("Not connected")); // TEMPORARY: num_bytes_written = 0; } diff --git a/shared-bindings/_bleio/__init__.c b/shared-bindings/_bleio/__init__.c index 3d9084dd5..2ef70a64f 100644 --- a/shared-bindings/_bleio/__init__.c +++ b/shared-bindings/_bleio/__init__.c @@ -63,7 +63,6 @@ //| """Catchall exception for Bluetooth related errors.""" //| ... MP_DEFINE_BLEIO_EXCEPTION(BluetoothError, Exception) - NORETURN void mp_raise_bleio_BluetoothError(const compressed_string_t* fmt, ...) { va_list argptr; va_start(argptr,fmt); @@ -71,18 +70,6 @@ NORETURN void mp_raise_bleio_BluetoothError(const compressed_string_t* fmt, ...) va_end(argptr); nlr_raise(exception); } -//| class ConnectionError(BluetoothError): -//| """Raised when a connection is unavailable.""" -//| ... -//| -MP_DEFINE_BLEIO_EXCEPTION(ConnectionError, bleio_BluetoothError) -NORETURN void mp_raise_bleio_ConnectionError(const compressed_string_t* fmt, ...) { - va_list argptr; - va_start(argptr,fmt); - mp_obj_t exception = mp_obj_new_exception_msg_vlist(&mp_type_bleio_ConnectionError, fmt, argptr); - va_end(argptr); - nlr_raise(exception); -} //| class RoleError(BluetoothError): //| """Raised when a resource is used as the mismatched role. For example, if a local CCCD is @@ -93,6 +80,7 @@ MP_DEFINE_BLEIO_EXCEPTION(RoleError, bleio_BluetoothError) NORETURN void mp_raise_bleio_RoleError(const compressed_string_t* msg) { mp_raise_msg(&mp_type_bleio_RoleError, msg); } + //| class SecurityError(BluetoothError): //| """Raised when a security related error occurs.""" //| ... @@ -183,7 +171,6 @@ STATIC const mp_rom_map_elem_t bleio_module_globals_table[] = { // Errors { MP_ROM_QSTR(MP_QSTR_BluetoothError), OBJ_FROM_PTR(&mp_type_bleio_BluetoothError) }, - { MP_ROM_QSTR(MP_QSTR_ConnectionError), OBJ_FROM_PTR(&mp_type_bleio_ConnectionError) }, { MP_ROM_QSTR(MP_QSTR_RoleError), OBJ_FROM_PTR(&mp_type_bleio_RoleError) }, { MP_ROM_QSTR(MP_QSTR_SecurityError), OBJ_FROM_PTR(&mp_type_bleio_SecurityError) }, diff --git a/shared-bindings/_bleio/__init__.h b/shared-bindings/_bleio/__init__.h index 588b1f197..65ba9b3a5 100644 --- a/shared-bindings/_bleio/__init__.h +++ b/shared-bindings/_bleio/__init__.h @@ -51,14 +51,12 @@ const mp_obj_type_t mp_type_bleio_ ## exc_name = { \ }; extern const mp_obj_type_t mp_type_bleio_BluetoothError; -extern const mp_obj_type_t mp_type_bleio_ConnectionError; extern const mp_obj_type_t mp_type_bleio_RoleError; extern const mp_obj_type_t mp_type_bleio_SecurityError; extern mp_obj_t bleio_set_adapter(mp_obj_t adapter_obj); NORETURN void mp_raise_bleio_BluetoothError(const compressed_string_t* msg, ...); -NORETURN void mp_raise_bleio_ConnectionError(const compressed_string_t* msg, ...); NORETURN void mp_raise_bleio_RoleError(const compressed_string_t* msg); NORETURN void mp_raise_bleio_SecurityError(const compressed_string_t* msg, ...); diff --git a/supervisor/shared/background_callback.c b/supervisor/shared/background_callback.c index 8e12dd362..ef686cbab 100644 --- a/supervisor/shared/background_callback.c +++ b/supervisor/shared/background_callback.c @@ -29,6 +29,7 @@ #include "py/gc.h" #include "py/mpconfig.h" #include "supervisor/background_callback.h" +#include "supervisor/linker.h" #include "supervisor/shared/tick.h" #include "shared-bindings/microcontroller/__init__.h" @@ -63,7 +64,7 @@ void background_callback_add(background_callback_t *cb, background_callback_fun } static bool in_background_callback; -void background_callback_run_all() { +void PLACE_IN_ITCM(background_callback_run_all)() { if (!callback_head) { return; } diff --git a/supervisor/shared/filesystem.c b/supervisor/shared/filesystem.c index f6b94e38b..88603be0c 100644 --- a/supervisor/shared/filesystem.c +++ b/supervisor/shared/filesystem.c @@ -105,13 +105,19 @@ void filesystem_init(bool create_allowed, bool force_create) { // set label #ifdef CIRCUITPY_DRIVE_LABEL - f_setlabel(&vfs_fat->fatfs, CIRCUITPY_DRIVE_LABEL); + res = f_setlabel(&vfs_fat->fatfs, CIRCUITPY_DRIVE_LABEL); #else - f_setlabel(&vfs_fat->fatfs, "CIRCUITPY"); + res = f_setlabel(&vfs_fat->fatfs, "CIRCUITPY"); #endif + if (res != FR_OK) { + return; + } // inhibit file indexing on MacOS - f_mkdir(&vfs_fat->fatfs, "/.fseventsd"); + res = f_mkdir(&vfs_fat->fatfs, "/.fseventsd"); + if (res != FR_OK) { + return; + } make_empty_file(&vfs_fat->fatfs, "/.metadata_never_index"); make_empty_file(&vfs_fat->fatfs, "/.Trashes"); make_empty_file(&vfs_fat->fatfs, "/.fseventsd/no_log"); @@ -119,7 +125,10 @@ void filesystem_init(bool create_allowed, bool force_create) { make_sample_code_file(&vfs_fat->fatfs); // create empty lib directory - f_mkdir(&vfs_fat->fatfs, "/lib"); + res = f_mkdir(&vfs_fat->fatfs, "/lib"); + if (res != FR_OK) { + return; + } // and ensure everything is flushed supervisor_flash_flush(); diff --git a/supervisor/shared/flash.c b/supervisor/shared/flash.c index 9f52ddbc4..1e09fe14b 100644 --- a/supervisor/shared/flash.c +++ b/supervisor/shared/flash.c @@ -88,9 +88,6 @@ static void build_partition(uint8_t *buf, int boot, int type, uint32_t start_blo mp_uint_t flash_read_blocks(uint8_t *dest, uint32_t block_num, uint32_t num_blocks) { if (block_num == 0) { - if (num_blocks > 1) { - return 1; // error - } // fake the MBR so we can decide on our own partition table for (int i = 0; i < 446; i++) { @@ -104,9 +101,13 @@ mp_uint_t flash_read_blocks(uint8_t *dest, uint32_t block_num, uint32_t num_bloc dest[510] = 0x55; dest[511] = 0xaa; - - return 0; // ok - + if (num_blocks > 1) { + dest += 512; + num_blocks -= 1; + // Fall through and do a read from flash. + } else { + return 0; // Done and ok. + } } return supervisor_flash_read_blocks(dest, block_num - PART1_START_BLOCK, num_blocks); } @@ -159,16 +160,37 @@ STATIC mp_obj_t supervisor_flash_obj_writeblocks(mp_obj_t self, mp_obj_t block_n } STATIC MP_DEFINE_CONST_FUN_OBJ_3(supervisor_flash_obj_writeblocks_obj, supervisor_flash_obj_writeblocks); +bool flash_ioctl(size_t cmd, mp_int_t* out_value) { + *out_value = 0; + switch (cmd) { + case BP_IOCTL_INIT: + supervisor_flash_init(); + break; + case BP_IOCTL_DEINIT: + supervisor_flash_flush(); + break; // TODO properly + case BP_IOCTL_SYNC: + supervisor_flash_flush(); + break; + case BP_IOCTL_SEC_COUNT: + *out_value = flash_get_block_count(); + break; + case BP_IOCTL_SEC_SIZE: + *out_value = supervisor_flash_get_block_size(); + break; + default: + return false; + } + return true; +} + STATIC mp_obj_t supervisor_flash_obj_ioctl(mp_obj_t self, mp_obj_t cmd_in, mp_obj_t arg_in) { mp_int_t cmd = mp_obj_get_int(cmd_in); - switch (cmd) { - case BP_IOCTL_INIT: supervisor_flash_init(); return MP_OBJ_NEW_SMALL_INT(0); - case BP_IOCTL_DEINIT: supervisor_flash_flush(); return MP_OBJ_NEW_SMALL_INT(0); // TODO properly - case BP_IOCTL_SYNC: supervisor_flash_flush(); return MP_OBJ_NEW_SMALL_INT(0); - case BP_IOCTL_SEC_COUNT: return MP_OBJ_NEW_SMALL_INT(flash_get_block_count()); - case BP_IOCTL_SEC_SIZE: return MP_OBJ_NEW_SMALL_INT(supervisor_flash_get_block_size()); - default: return mp_const_none; + mp_int_t out_value; + if (flash_ioctl(cmd, &out_value)) { + return MP_OBJ_NEW_SMALL_INT(out_value); } + return mp_const_none; } STATIC MP_DEFINE_CONST_FUN_OBJ_3(supervisor_flash_obj_ioctl_obj, supervisor_flash_obj_ioctl); @@ -200,4 +222,5 @@ void supervisor_flash_init_vfs(fs_user_mount_t *vfs) { vfs->writeblocks[2] = (mp_obj_t)flash_write_blocks; // native version vfs->u.ioctl[0] = (mp_obj_t)&supervisor_flash_obj_ioctl_obj; vfs->u.ioctl[1] = (mp_obj_t)&supervisor_flash_obj; + vfs->u.ioctl[2] = (mp_obj_t)flash_ioctl; // native version } |