diff options
55 files changed, 4673 insertions, 357 deletions
diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 6bb9612f8..360c29992 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -275,6 +275,7 @@ jobs: - "pyportal" - "pyportal_titano" - "pyruler" + - "qtpy_m0" - "raytac_mdbt50q-db-40" - "robohatmm1_m4" - "sam32" diff --git a/devices/ble_hci/common-hal/_bleio/att.c b/devices/ble_hci/common-hal/_bleio/att.c index 591e508a6..6528361cb 100644 --- a/devices/ble_hci/common-hal/_bleio/att.c +++ b/devices/ble_hci/common-hal/_bleio/att.c @@ -1748,6 +1748,7 @@ void check_att_err(uint8_t err) { break; case BT_ATT_ERR_ENCRYPTION_KEY_SIZE: msg = translate("Encryption key size"); + break; case BT_ATT_ERR_INVALID_ATTRIBUTE_LEN: msg = translate("Invalid attribute length"); break; diff --git a/extmod/re1.5/recursiveloop.c b/extmod/re1.5/recursiveloop.c index bb337decf..5c1f37a5a 100644 --- a/extmod/re1.5/recursiveloop.c +++ b/extmod/re1.5/recursiveloop.c @@ -22,6 +22,7 @@ recursiveloop(char *pc, const char *sp, Subject *input, const char **subp, int n case Char: if(*sp != *pc++) return 0; + /* FALLTHROUGH */ case Any: sp++; continue; diff --git a/locale/ID.po b/locale/ID.po index dd41b740f..5fd0647a1 100644 --- a/locale/ID.po +++ b/locale/ID.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-30 14:38-0400\n" +"POT-Creation-Date: 2020-09-13 14:21-0500\n" "PO-Revision-Date: 2020-07-06 18:10+0000\n" "Last-Translator: oon arfiandwi <oon.arfiandwi@gmail.com>\n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -34,14 +34,6 @@ msgstr "" "Harap ajukan masalah dengan konten drive CIRCUITPY Anda di\n" "https://github.com/adafruit/circuitpython/issues\n" -#: supervisor/shared/safe_mode.c -msgid "" -"\n" -"To exit, please reset the board without " -msgstr "" -"\n" -"Untuk keluar, harap setel ulang papan tanpa" - #: py/obj.c msgid " File \"%q\"" msgstr " File \"%q\"" @@ -279,7 +271,7 @@ msgstr "pow() 3-arg tidak didukung" msgid "A hardware interrupt channel is already in use" msgstr "Sebuah channel hardware interrupt sedang digunakan" -#: shared-bindings/_bleio/Address.c +#: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c #, c-format msgid "Address must be %d bytes long" msgstr "Alamat harus sepanjang %d byte" @@ -377,6 +369,10 @@ msgstr "" msgid "Attempted heap allocation when MicroPython VM not running." msgstr "Mencoba alokasi heap ketika MicroPython VM tidak berjalan." +#: shared-bindings/wifi/Radio.c +msgid "Authentication failure" +msgstr "" + #: main.c msgid "Auto-reload is off.\n" msgstr "Auto-reload tidak aktif.\n" @@ -596,6 +592,10 @@ msgstr "" "CircuitPython dalam mode aman karena Anda menekan tombol reset saat boot. " "Tekan lagi untuk keluar dari mode aman.\n" +#: supervisor/shared/safe_mode.c +msgid "CircuitPython was unable to allocate the heap.\n" +msgstr "" + #: shared-module/bitbangio/SPI.c msgid "Clock pin init failed." msgstr "Init pin clock gagal." @@ -1244,6 +1244,10 @@ msgstr "" msgid "No more timers available on this pin." msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "No network with that ssid" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1264,6 +1268,10 @@ msgstr "" msgid "Nordic Soft Device failure assertion." msgstr "" +#: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c +msgid "Not a valid IP string" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #: shared-bindings/_bleio/CharacteristicBuffer.c #, fuzzy @@ -1309,6 +1317,10 @@ msgid "" "%d bpp given" msgstr "" +#: shared-bindings/ipaddress/__init__.c +msgid "Only raw int supported for ip" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "" @@ -1508,6 +1520,10 @@ msgstr "" msgid "Serializer in use" msgstr "Serializer sedang digunakan" +#: shared-bindings/ssl/SSLContext.c +msgid "Server side context cannot have hostname" +msgstr "" + #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "" @@ -1608,6 +1624,10 @@ msgid "" "Timer was reserved for internal use - declare PWM pins earlier in the program" msgstr "" +#: supervisor/shared/safe_mode.c +msgid "To exit, please reset the board without " +msgstr "Untuk keluar, silahkan reset board tanpa " + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Too many channels in sample." msgstr "Terlalu banyak channel dalam sampel" @@ -1703,6 +1723,10 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "Unknown failure" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown gatt error: 0x%04x" @@ -1813,6 +1837,10 @@ msgstr "" "\n" "Untuk menampilkan modul built-in silahkan ketik `help(\"modules\")`.\n" +#: shared-bindings/wifi/Radio.c +msgid "WiFi password must be between 8 and 63 characters" +msgstr "" + #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Writes not supported on Characteristic" msgstr "" @@ -1927,7 +1955,7 @@ msgstr "" msgid "bad format string" msgstr "" -#: py/binary.c +#: py/binary.c py/objarray.c msgid "bad typecode" msgstr "typecode buruk" @@ -1981,6 +2009,10 @@ msgstr "" msgid "bytes > 8 bits not supported" msgstr "byte > 8 bit tidak didukung" +#: py/objarray.c +msgid "bytes length not a multiple of item size" +msgstr "" + #: py/objstr.c msgid "bytes value out of range" msgstr "" @@ -2947,6 +2979,11 @@ msgstr "" msgid "overflow converting long int to machine word" msgstr "" +#: py/modstruct.c +#, c-format +msgid "pack expected %d items for packing (got %d)" +msgstr "" + #: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c msgid "palette must be 32 bytes long" msgstr "" @@ -3421,6 +3458,13 @@ msgstr "" msgid "zi must be of shape (n_section, 2)" msgstr "" +#~ msgid "" +#~ "\n" +#~ "To exit, please reset the board without " +#~ msgstr "" +#~ "\n" +#~ "Untuk keluar, harap setel ulang papan tanpa" + #~ msgid "%q indices must be integers, not %s" #~ msgstr "indeks %q harus bilangan bulat, bukan %s" @@ -3680,9 +3724,6 @@ msgstr "" #~ "Tegangan dari mikrokontroler turun atau mati. Pastikan sumber tegangan " #~ "memberikan daya\n" -#~ msgid "To exit, please reset the board without " -#~ msgstr "Untuk keluar, silahkan reset board tanpa " - #~ msgid "UART(%d) does not exist" #~ msgstr "UART(%d) tidak ada" diff --git a/locale/cs.po b/locale/cs.po index 3e22ac251..8dcf08cf2 100644 --- a/locale/cs.po +++ b/locale/cs.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-30 14:38-0400\n" +"POT-Creation-Date: 2020-09-13 14:21-0500\n" "PO-Revision-Date: 2020-05-24 03:22+0000\n" "Last-Translator: dronecz <mzuzelka@gmail.com>\n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -34,14 +34,6 @@ msgstr "" "Založte prosím problém s obsahem vaší jednotky CIRCUITPY na adrese\n" "https://github.com/adafruit/circuitpython/issues\n" -#: supervisor/shared/safe_mode.c -msgid "" -"\n" -"To exit, please reset the board without " -msgstr "" -"\n" -"Pro ukončení, prosím resetujte desku bez " - #: py/obj.c msgid " File \"%q\"" msgstr " Soubor \"%q\"" @@ -279,7 +271,7 @@ msgstr "" msgid "A hardware interrupt channel is already in use" msgstr "" -#: shared-bindings/_bleio/Address.c +#: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c #, c-format msgid "Address must be %d bytes long" msgstr "" @@ -377,6 +369,10 @@ msgstr "" msgid "Attempted heap allocation when MicroPython VM not running." msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "Authentication failure" +msgstr "" + #: main.c msgid "Auto-reload is off.\n" msgstr "" @@ -584,6 +580,10 @@ msgid "" "boot. Press again to exit safe mode.\n" msgstr "" +#: supervisor/shared/safe_mode.c +msgid "CircuitPython was unable to allocate the heap.\n" +msgstr "" + #: shared-module/bitbangio/SPI.c msgid "Clock pin init failed." msgstr "" @@ -1227,6 +1227,10 @@ msgstr "" msgid "No more timers available on this pin." msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "No network with that ssid" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1247,6 +1251,10 @@ msgstr "" msgid "Nordic Soft Device failure assertion." msgstr "" +#: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c +msgid "Not a valid IP string" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #: shared-bindings/_bleio/CharacteristicBuffer.c msgid "Not connected" @@ -1291,6 +1299,10 @@ msgid "" "%d bpp given" msgstr "" +#: shared-bindings/ipaddress/__init__.c +msgid "Only raw int supported for ip" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "" @@ -1487,6 +1499,10 @@ msgstr "" msgid "Serializer in use" msgstr "" +#: shared-bindings/ssl/SSLContext.c +msgid "Server side context cannot have hostname" +msgstr "" + #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "" @@ -1587,6 +1603,10 @@ msgid "" "Timer was reserved for internal use - declare PWM pins earlier in the program" msgstr "" +#: supervisor/shared/safe_mode.c +msgid "To exit, please reset the board without " +msgstr "" + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Too many channels in sample." msgstr "" @@ -1682,6 +1702,10 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "Unknown failure" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown gatt error: 0x%04x" @@ -1785,6 +1809,10 @@ msgid "" "To list built-in modules please do `help(\"modules\")`.\n" msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "WiFi password must be between 8 and 63 characters" +msgstr "" + #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Writes not supported on Characteristic" msgstr "" @@ -1899,7 +1927,7 @@ msgstr "" msgid "bad format string" msgstr "" -#: py/binary.c +#: py/binary.c py/objarray.c msgid "bad typecode" msgstr "" @@ -1952,6 +1980,10 @@ msgstr "" msgid "bytes > 8 bits not supported" msgstr "" +#: py/objarray.c +msgid "bytes length not a multiple of item size" +msgstr "" + #: py/objstr.c msgid "bytes value out of range" msgstr "" @@ -2917,6 +2949,11 @@ msgstr "" msgid "overflow converting long int to machine word" msgstr "" +#: py/modstruct.c +#, c-format +msgid "pack expected %d items for packing (got %d)" +msgstr "" + #: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c msgid "palette must be 32 bytes long" msgstr "" @@ -3390,5 +3427,12 @@ msgstr "" msgid "zi must be of shape (n_section, 2)" msgstr "" +#~ msgid "" +#~ "\n" +#~ "To exit, please reset the board without " +#~ msgstr "" +#~ "\n" +#~ "Pro ukončení, prosím resetujte desku bez " + #~ msgid "%q indices must be integers, not %s" #~ msgstr "Indexy %q musí být celá čísla, nikoli %s" diff --git a/locale/de_DE.po b/locale/de_DE.po index 3debbcb62..d9f80769e 100644 --- a/locale/de_DE.po +++ b/locale/de_DE.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-30 14:38-0400\n" +"POT-Creation-Date: 2020-09-13 14:21-0500\n" "PO-Revision-Date: 2020-06-16 18:24+0000\n" "Last-Translator: Andreas Buchen <andreas.buchen@gmail.com>\n" "Language: de_DE\n" @@ -33,14 +33,6 @@ msgstr "" "Bitte melden Sie ein Problem mit dem Inhalt Ihres CIRCUITPY-Laufwerks unter\n" "https://github.com/adafruit/circuitpython/issues\n" -#: supervisor/shared/safe_mode.c -msgid "" -"\n" -"To exit, please reset the board without " -msgstr "" -"\n" -"Zum Beenden, resete bitte das Board ohne " - #: py/obj.c msgid " File \"%q\"" msgstr " Datei \"%q\"" @@ -278,7 +270,7 @@ msgstr "3-arg pow() wird nicht unterstützt" msgid "A hardware interrupt channel is already in use" msgstr "Ein Hardware Interrupt Kanal wird schon benutzt" -#: shared-bindings/_bleio/Address.c +#: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c #, c-format msgid "Address must be %d bytes long" msgstr "Die Adresse muss %d Bytes lang sein" @@ -378,6 +370,10 @@ msgstr "" "Versuch einer Heap Reservierung, wenn die MicroPython-VM nicht ausgeführt " "wird." +#: shared-bindings/wifi/Radio.c +msgid "Authentication failure" +msgstr "" + #: main.c msgid "Auto-reload is off.\n" msgstr "Automatisches Neuladen ist deaktiviert.\n" @@ -592,6 +588,10 @@ msgstr "" "Reset-Taste gedrückt haben. Drücken Sie erneut, um den abgesicherten Modus " "zu verlassen.\n" +#: supervisor/shared/safe_mode.c +msgid "CircuitPython was unable to allocate the heap.\n" +msgstr "" + #: shared-module/bitbangio/SPI.c msgid "Clock pin init failed." msgstr "Clock pin init fehlgeschlagen." @@ -1246,6 +1246,10 @@ msgstr "Keine langen Integer (long) unterstützt" msgid "No more timers available on this pin." msgstr "An diesem Pin sind keine Timer mehr verfügbar." +#: shared-bindings/wifi/Radio.c +msgid "No network with that ssid" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Kein Pulldown Widerstand am Pin; 1Mohm wird vorgeschlagen" @@ -1266,6 +1270,10 @@ msgstr "Kein Timer verfügbar" msgid "Nordic Soft Device failure assertion." msgstr "Fehlerbehauptung für Nordic Soft Device." +#: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c +msgid "Not a valid IP string" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #: shared-bindings/_bleio/CharacteristicBuffer.c msgid "Not connected" @@ -1316,6 +1324,10 @@ msgstr "" "Nur monochrome, indizierte 4bpp oder 8bpp, und 16bpp oder größere BMPs " "unterstützt: %d bpp wurden gegeben" +#: shared-bindings/ipaddress/__init__.c +msgid "Only raw int supported for ip" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "Oversample muss ein Vielfaches von 8 sein." @@ -1517,6 +1529,10 @@ msgstr "Ausgewählter RTS-Pin ungültig" msgid "Serializer in use" msgstr "Serializer wird benutzt" +#: shared-bindings/ssl/SSLContext.c +msgid "Server side context cannot have hostname" +msgstr "" + #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "Slice und Wert (value) haben unterschiedliche Längen." @@ -1629,6 +1645,10 @@ msgid "" "Timer was reserved for internal use - declare PWM pins earlier in the program" msgstr "" +#: supervisor/shared/safe_mode.c +msgid "To exit, please reset the board without " +msgstr "Zum beenden, resette bitte das board ohne " + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Too many channels in sample." msgstr "Zu viele Kanäle im sample." @@ -1726,6 +1746,10 @@ msgstr "Schreiben in nvm nicht möglich." msgid "Unexpected nrfx uuid type" msgstr "Unerwarteter nrfx uuid-Typ" +#: shared-bindings/wifi/Radio.c +msgid "Unknown failure" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown gatt error: 0x%04x" @@ -1840,6 +1864,10 @@ msgstr "" "Um die integrierten Module aufzulisten, führe bitte `help(\"modules\")` " "aus.\n" +#: shared-bindings/wifi/Radio.c +msgid "WiFi password must be between 8 and 63 characters" +msgstr "" + #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Writes not supported on Characteristic" msgstr "Schreiben nicht unterstüzt für die Characteristic" @@ -1956,7 +1984,7 @@ msgstr "schlechter Konvertierungsspezifizierer" msgid "bad format string" msgstr "Falscher Formatstring" -#: py/binary.c +#: py/binary.c py/objarray.c msgid "bad typecode" msgstr "Falscher Typcode" @@ -2009,6 +2037,10 @@ msgstr "Byteorder ist kein String" msgid "bytes > 8 bits not supported" msgstr "bytes mit mehr als 8 bits werden nicht unterstützt" +#: py/objarray.c +msgid "bytes length not a multiple of item size" +msgstr "" + #: py/objstr.c msgid "bytes value out of range" msgstr "Byte-Wert außerhalb des Bereichs" @@ -2998,6 +3030,11 @@ msgstr "" msgid "overflow converting long int to machine word" msgstr "Überlauf beim konvertieren von long int zu machine word" +#: py/modstruct.c +#, c-format +msgid "pack expected %d items for packing (got %d)" +msgstr "" + #: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c msgid "palette must be 32 bytes long" msgstr "Die Palette muss 32 Byte lang sein" @@ -3478,6 +3515,13 @@ msgstr "" msgid "zi must be of shape (n_section, 2)" msgstr "" +#~ msgid "" +#~ "\n" +#~ "To exit, please reset the board without " +#~ msgstr "" +#~ "\n" +#~ "Zum Beenden, resete bitte das Board ohne " + #~ msgid "PulseOut not supported on this chip" #~ msgstr "PulseOut wird auf diesem Chip nicht unterstützt" @@ -3900,9 +3944,6 @@ msgstr "" #~ "Die Reset-Taste wurde beim Booten von CircuitPython gedrückt. Drücke sie " #~ "erneut um den abgesicherten Modus zu verlassen. \n" -#~ msgid "To exit, please reset the board without " -#~ msgstr "Zum beenden, resette bitte das board ohne " - #~ msgid "UART(%d) does not exist" #~ msgstr "UART(%d) existiert nicht" diff --git a/locale/el.po b/locale/el.po new file mode 100644 index 000000000..6f5ae88e0 --- /dev/null +++ b/locale/el.po @@ -0,0 +1,3423 @@ +# SOME DESCRIPTIVE TITLE. +# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER +# This file is distributed under the same license as the PACKAGE package. +# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR. +# +msgid "" +msgstr "" +"Project-Id-Version: PACKAGE VERSION\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2020-09-13 14:21-0500\n" +"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" +"Last-Translator: Automatically generated\n" +"Language-Team: none\n" +"Language: el\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#: main.c +msgid "" +"\n" +"Code done running. Waiting for reload.\n" +msgstr "" + +#: supervisor/shared/safe_mode.c +msgid "" +"\n" +"Please file an issue with the contents of your CIRCUITPY drive at \n" +"https://github.com/adafruit/circuitpython/issues\n" +msgstr "" + +#: py/obj.c +msgid " File \"%q\"" +msgstr "" + +#: py/obj.c +msgid " File \"%q\", line %d" +msgstr "" + +#: main.c +msgid " output:\n" +msgstr "" + +#: py/objstr.c +#, c-format +msgid "%%c requires int or char" +msgstr "" + +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "%d address pins and %d rgb pins indicate a height of %d, not %d" +msgstr "" + +#: ports/atmel-samd/common-hal/sdioio/SDCard.c +msgid "%q failure: %d" +msgstr "" + +#: shared-bindings/microcontroller/Pin.c +msgid "%q in use" +msgstr "" + +#: extmod/moductypes.c ports/atmel-samd/common-hal/pulseio/PulseIn.c +#: ports/cxd56/common-hal/pulseio/PulseIn.c +#: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c py/obj.c py/objstr.c +#: py/objstrunicode.c +msgid "%q index out of range" +msgstr "" + +#: py/obj.c +msgid "%q indices must be integers, not %q" +msgstr "" + +#: shared-bindings/vectorio/Polygon.c +msgid "%q list must be a list" +msgstr "" + +#: shared-bindings/memorymonitor/AllocationAlarm.c +msgid "%q must be >= 0" +msgstr "" + +#: shared-bindings/_bleio/CharacteristicBuffer.c +#: shared-bindings/_bleio/PacketBuffer.c shared-bindings/displayio/Group.c +#: shared-bindings/displayio/Shape.c +#: shared-bindings/memorymonitor/AllocationAlarm.c +#: shared-bindings/vectorio/Circle.c shared-bindings/vectorio/Rectangle.c +msgid "%q must be >= 1" +msgstr "" + +#: shared-module/vectorio/Polygon.c +msgid "%q must be a tuple of length 2" +msgstr "" + +#: ports/atmel-samd/common-hal/sdioio/SDCard.c +msgid "%q pin invalid" +msgstr "" + +#: shared-bindings/fontio/BuiltinFont.c +msgid "%q should be an int" +msgstr "" + +#: py/bc.c py/objnamedtuple.c +msgid "%q() takes %d positional arguments but %d were given" +msgstr "" + +#: py/argcheck.c +msgid "'%q' argument required" +msgstr "" + +#: py/runtime.c +msgid "'%q' object cannot assign attribute '%q'" +msgstr "" + +#: py/proto.c +msgid "'%q' object does not support '%q'" +msgstr "" + +#: py/obj.c +msgid "'%q' object does not support item assignment" +msgstr "" + +#: py/obj.c +msgid "'%q' object does not support item deletion" +msgstr "" + +#: py/runtime.c +msgid "'%q' object has no attribute '%q'" +msgstr "" + +#: py/runtime.c +msgid "'%q' object is not an iterator" +msgstr "" + +#: py/objtype.c py/runtime.c +msgid "'%q' object is not callable" +msgstr "" + +#: py/runtime.c +msgid "'%q' object is not iterable" +msgstr "" + +#: py/obj.c +msgid "'%q' object is not subscriptable" +msgstr "" + +#: py/emitinlinethumb.c py/emitinlinextensa.c +#, c-format +msgid "'%s' expects a label" +msgstr "" + +#: py/emitinlinethumb.c py/emitinlinextensa.c +#, c-format +msgid "'%s' expects a register" +msgstr "" + +#: py/emitinlinethumb.c +#, c-format +msgid "'%s' expects a special register" +msgstr "" + +#: py/emitinlinethumb.c +#, c-format +msgid "'%s' expects an FPU register" +msgstr "" + +#: py/emitinlinethumb.c +#, c-format +msgid "'%s' expects an address of the form [a, b]" +msgstr "" + +#: py/emitinlinethumb.c py/emitinlinextensa.c +#, c-format +msgid "'%s' expects an integer" +msgstr "" + +#: py/emitinlinethumb.c +#, c-format +msgid "'%s' expects at most r%d" +msgstr "" + +#: py/emitinlinethumb.c +#, c-format +msgid "'%s' expects {r0, r1, ...}" +msgstr "" + +#: py/emitinlinextensa.c +#, c-format +msgid "'%s' integer %d is not within range %d..%d" +msgstr "" + +#: py/emitinlinethumb.c +#, c-format +msgid "'%s' integer 0x%x does not fit in mask 0x%x" +msgstr "" + +#: py/objstr.c +msgid "'=' alignment not allowed in string format specifier" +msgstr "" + +#: shared-module/struct/__init__.c +msgid "'S' and 'O' are not supported format types" +msgstr "" + +#: py/compile.c +msgid "'align' requires 1 argument" +msgstr "" + +#: py/compile.c +msgid "'await' outside function" +msgstr "" + +#: py/compile.c +msgid "'await', 'async for' or 'async with' outside async function" +msgstr "" + +#: py/compile.c +msgid "'break' outside loop" +msgstr "" + +#: py/compile.c +msgid "'continue' outside loop" +msgstr "" + +#: py/objgenerator.c +msgid "'coroutine' object is not an iterator" +msgstr "" + +#: py/compile.c +msgid "'data' requires at least 2 arguments" +msgstr "" + +#: py/compile.c +msgid "'data' requires integer arguments" +msgstr "" + +#: py/compile.c +msgid "'label' requires 1 argument" +msgstr "" + +#: py/compile.c +msgid "'return' outside function" +msgstr "" + +#: py/compile.c +msgid "'yield' outside function" +msgstr "" + +#: py/compile.c +msgid "*x must be assignment target" +msgstr "" + +#: py/obj.c +msgid ", in %q\n" +msgstr "" + +#: py/objcomplex.c +msgid "0.0 to a complex power" +msgstr "" + +#: py/modbuiltins.c +msgid "3-arg pow() not supported" +msgstr "" + +#: ports/atmel-samd/common-hal/countio/Counter.c +#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c +msgid "A hardware interrupt channel is already in use" +msgstr "" + +#: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c +#, c-format +msgid "Address must be %d bytes long" +msgstr "" + +#: shared-bindings/_bleio/Address.c +msgid "Address type out of range" +msgstr "" + +#: ports/nrf/common-hal/busio/I2C.c +msgid "All I2C peripherals are in use" +msgstr "" + +#: ports/nrf/common-hal/busio/SPI.c +msgid "All SPI peripherals are in use" +msgstr "" + +#: ports/nrf/common-hal/busio/UART.c +msgid "All UART peripherals are in use" +msgstr "" + +#: ports/atmel-samd/common-hal/audioio/AudioOut.c +msgid "All event channels in use" +msgstr "" + +#: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c +msgid "All sync event channels in use" +msgstr "" + +#: shared-bindings/pwmio/PWMOut.c +msgid "All timers for this pin are in use" +msgstr "" + +#: ports/atmel-samd/common-hal/_pew/PewPew.c +#: ports/atmel-samd/common-hal/audioio/AudioOut.c +#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c +#: ports/atmel-samd/common-hal/pulseio/PulseIn.c +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c +#: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c +#: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c +msgid "All timers in use" +msgstr "" + +#: ports/nrf/common-hal/_bleio/Adapter.c +msgid "Already advertising." +msgstr "" + +#: shared-module/memorymonitor/AllocationAlarm.c +#: shared-module/memorymonitor/AllocationSize.c +msgid "Already running" +msgstr "" + +#: ports/cxd56/common-hal/analogio/AnalogIn.c +msgid "AnalogIn not supported on given pin" +msgstr "" + +#: ports/cxd56/common-hal/analogio/AnalogOut.c +#: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c +#: ports/nrf/common-hal/analogio/AnalogOut.c +msgid "AnalogOut functionality not supported" +msgstr "" + +#: shared-bindings/analogio/AnalogOut.c +msgid "AnalogOut is only 16 bits. Value must be less than 65536." +msgstr "" + +#: ports/atmel-samd/common-hal/analogio/AnalogOut.c +msgid "AnalogOut not supported on given pin" +msgstr "" + +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +msgid "Another send is already active" +msgstr "" + +#: shared-bindings/pulseio/PulseOut.c +msgid "Array must contain halfwords (type 'H')" +msgstr "" + +#: shared-bindings/nvm/ByteArray.c +msgid "Array values should be single bytes." +msgstr "" + +#: shared-bindings/microcontroller/Pin.c +msgid "At most %d %q may be specified (not %d)" +msgstr "" + +#: shared-module/memorymonitor/AllocationAlarm.c +#, c-format +msgid "Attempt to allocate %d blocks" +msgstr "" + +#: supervisor/shared/safe_mode.c +msgid "Attempted heap allocation when MicroPython VM not running." +msgstr "" + +#: shared-bindings/wifi/Radio.c +msgid "Authentication failure" +msgstr "" + +#: main.c +msgid "Auto-reload is off.\n" +msgstr "" + +#: main.c +msgid "" +"Auto-reload is on. Simply save files over USB to run them or enter REPL to " +"disable.\n" +msgstr "" + +#: shared-module/displayio/Display.c +#: shared-module/framebufferio/FramebufferDisplay.c +msgid "Below minimum frame rate" +msgstr "" + +#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c +msgid "Bit clock and word select must share a clock unit" +msgstr "" + +#: shared-bindings/audiobusio/PDMIn.c +msgid "Bit depth must be multiple of 8." +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/UART.c +msgid "Both RX and TX required for flow control" +msgstr "" + +#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c +msgid "Both pins must support hardware interrupts" +msgstr "" + +#: shared-bindings/displayio/Display.c +#: shared-bindings/framebufferio/FramebufferDisplay.c +#: shared-bindings/rgbmatrix/RGBMatrix.c +msgid "Brightness must be 0-1.0" +msgstr "" + +#: shared-bindings/supervisor/__init__.c +msgid "Brightness must be between 0 and 255" +msgstr "" + +#: shared-bindings/displayio/Display.c +#: shared-bindings/framebufferio/FramebufferDisplay.c +msgid "Brightness not adjustable" +msgstr "" + +#: shared-bindings/_bleio/UUID.c +#, c-format +msgid "Buffer + offset too small %d %d %d" +msgstr "" + +#: shared-module/usb_hid/Device.c +#, c-format +msgid "Buffer incorrect size. Should be %d bytes." +msgstr "" + +#: shared-bindings/displayio/Display.c +#: shared-bindings/framebufferio/FramebufferDisplay.c +msgid "Buffer is not a bytearray." +msgstr "" + +#: shared-bindings/displayio/Display.c +#: shared-bindings/framebufferio/FramebufferDisplay.c +msgid "Buffer is too small" +msgstr "" + +#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c +#, c-format +msgid "Buffer length %d too big. It must be less than %d" +msgstr "" + +#: ports/atmel-samd/common-hal/sdioio/SDCard.c +#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c +msgid "Buffer length must be a multiple of 512" +msgstr "" + +#: ports/stm/common-hal/sdioio/SDCard.c +msgid "Buffer must be a multiple of 512 bytes" +msgstr "" + +#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c +msgid "Buffer must be at least length 1" +msgstr "" + +#: ports/nrf/common-hal/_bleio/PacketBuffer.c +msgid "Buffer too large and unable to allocate" +msgstr "" + +#: shared-bindings/_bleio/PacketBuffer.c +#, c-format +msgid "Buffer too short by %d bytes" +msgstr "" + +#: ports/atmel-samd/common-hal/displayio/ParallelBus.c +#: ports/nrf/common-hal/displayio/ParallelBus.c +#, c-format +msgid "Bus pin %d is already in use" +msgstr "" + +#: shared-bindings/_bleio/UUID.c +msgid "Byte buffer must be 16 bytes." +msgstr "" + +#: shared-bindings/nvm/ByteArray.c +msgid "Bytes must be between 0 and 255." +msgstr "" + +#: shared-bindings/aesio/aes.c +msgid "CBC blocks must be multiples of 16 bytes" +msgstr "" + +#: py/objtype.c +msgid "Call super().__init__() before accessing native object." +msgstr "" + +#: ports/nrf/common-hal/_bleio/Characteristic.c +msgid "Can't set CCCD on local Characteristic" +msgstr "" + +#: shared-bindings/_bleio/Adapter.c +msgid "Cannot create a new Adapter; use _bleio.adapter;" +msgstr "" + +#: shared-bindings/displayio/Bitmap.c +#: shared-bindings/memorymonitor/AllocationSize.c +#: shared-bindings/pulseio/PulseIn.c +msgid "Cannot delete values" +msgstr "" + +#: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c +#: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c +#: ports/nrf/common-hal/digitalio/DigitalInOut.c +msgid "Cannot get pull while in output mode" +msgstr "" + +#: ports/nrf/common-hal/microcontroller/Processor.c +msgid "Cannot get temperature" +msgstr "" + +#: shared-bindings/_bleio/Adapter.c +msgid "Cannot have scan responses for extended, connectable advertisements." +msgstr "" + +#: ports/atmel-samd/common-hal/audioio/AudioOut.c +msgid "Cannot output both channels on the same pin" +msgstr "" + +#: shared-module/bitbangio/SPI.c +msgid "Cannot read without MISO pin." +msgstr "" + +#: shared-bindings/audiobusio/PDMIn.c +msgid "Cannot record to a file" +msgstr "" + +#: shared-module/storage/__init__.c +msgid "Cannot remount '/' when USB is active." +msgstr "" + +#: ports/atmel-samd/common-hal/microcontroller/__init__.c +#: ports/cxd56/common-hal/microcontroller/__init__.c +#: ports/mimxrt10xx/common-hal/microcontroller/__init__.c +msgid "Cannot reset into bootloader because no bootloader is present." +msgstr "" + +#: shared-bindings/digitalio/DigitalInOut.c +msgid "Cannot set value when direction is input." +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/UART.c +msgid "Cannot specify RTS or CTS in RS485 mode" +msgstr "" + +#: py/objslice.c +msgid "Cannot subclass slice" +msgstr "" + +#: shared-module/bitbangio/SPI.c +msgid "Cannot transfer without MOSI and MISO pins." +msgstr "" + +#: extmod/moductypes.c +msgid "Cannot unambiguously get sizeof scalar" +msgstr "" + +#: ports/stm/common-hal/pwmio/PWMOut.c +msgid "Cannot vary frequency on a timer that is already in use" +msgstr "" + +#: shared-module/bitbangio/SPI.c +msgid "Cannot write without MOSI pin." +msgstr "" + +#: shared-bindings/_bleio/CharacteristicBuffer.c +msgid "CharacteristicBuffer writing not provided" +msgstr "" + +#: supervisor/shared/safe_mode.c +msgid "CircuitPython core code crashed hard. Whoops!\n" +msgstr "" + +#: supervisor/shared/safe_mode.c +msgid "" +"CircuitPython is in safe mode because you pressed the reset button during " +"boot. Press again to exit safe mode.\n" +msgstr "" + +#: supervisor/shared/safe_mode.c +msgid "CircuitPython was unable to allocate the heap.\n" +msgstr "" + +#: shared-module/bitbangio/SPI.c +msgid "Clock pin init failed." +msgstr "" + +#: shared-module/bitbangio/I2C.c +msgid "Clock stretch too long" +msgstr "" + +#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c +msgid "Clock unit in use" +msgstr "" + +#: shared-bindings/_pew/PewPew.c +msgid "Column entry must be digitalio.DigitalInOut" +msgstr "" + +#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c +#: shared-bindings/displayio/ParallelBus.c +msgid "Command must be an int between 0 and 255" +msgstr "" + +#: shared-bindings/_bleio/Connection.c +msgid "" +"Connection has been disconnected and can no longer be used. Create a new " +"connection." +msgstr "" + +#: py/persistentcode.c +msgid "Corrupt .mpy file" +msgstr "" + +#: py/emitglue.c +msgid "Corrupt raw code" +msgstr "" + +#: ports/cxd56/common-hal/gnss/GNSS.c +msgid "Could not initialize GNSS" +msgstr "" + +#: ports/cxd56/common-hal/sdioio/SDCard.c +msgid "Could not initialize SDCard" +msgstr "" + +#: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c +msgid "Could not initialize UART" +msgstr "" + +#: ports/stm/common-hal/pwmio/PWMOut.c +msgid "Could not initialize channel" +msgstr "" + +#: ports/stm/common-hal/pwmio/PWMOut.c +msgid "Could not initialize timer" +msgstr "" + +#: ports/stm/common-hal/pwmio/PWMOut.c +msgid "Could not re-init channel" +msgstr "" + +#: ports/stm/common-hal/pwmio/PWMOut.c +msgid "Could not re-init timer" +msgstr "" + +#: ports/stm/common-hal/pwmio/PWMOut.c +msgid "Could not restart PWM" +msgstr "" + +#: shared-bindings/_bleio/Adapter.c +msgid "Could not set address" +msgstr "" + +#: ports/stm/common-hal/pwmio/PWMOut.c +msgid "Could not start PWM" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Could not start interrupt, RX busy" +msgstr "" + +#: shared-module/audiomp3/MP3Decoder.c +msgid "Couldn't allocate decoder" +msgstr "" + +#: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c +#: shared-module/audiomp3/MP3Decoder.c +msgid "Couldn't allocate first buffer" +msgstr "" + +#: shared-module/audiomp3/MP3Decoder.c +msgid "Couldn't allocate input buffer" +msgstr "" + +#: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c +#: shared-module/audiomp3/MP3Decoder.c +msgid "Couldn't allocate second buffer" +msgstr "" + +#: supervisor/shared/safe_mode.c +msgid "Crash into the HardFault_Handler." +msgstr "" + +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Channel Init Error" +msgstr "" + +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "DAC Device Init Error" +msgstr "" + +#: ports/atmel-samd/common-hal/audioio/AudioOut.c +msgid "DAC already in use" +msgstr "" + +#: ports/atmel-samd/common-hal/displayio/ParallelBus.c +#: ports/nrf/common-hal/displayio/ParallelBus.c +msgid "Data 0 pin must be byte aligned" +msgstr "" + +#: shared-module/audiocore/WaveFile.c +msgid "Data chunk must follow fmt chunk" +msgstr "" + +#: ports/nrf/common-hal/_bleio/Adapter.c +msgid "Data too large for advertisement packet" +msgstr "" + +#: shared-bindings/audiobusio/PDMIn.c +msgid "Destination capacity is smaller than destination_length." +msgstr "" + +#: ports/nrf/common-hal/audiobusio/I2SOut.c +msgid "Device in use" +msgstr "" + +#: ports/cxd56/common-hal/digitalio/DigitalInOut.c +msgid "DigitalInOut not supported on given pin" +msgstr "" + +#: shared-bindings/displayio/Display.c +#: shared-bindings/framebufferio/FramebufferDisplay.c +msgid "Display must have a 16 bit colorspace." +msgstr "" + +#: shared-bindings/displayio/Display.c +#: shared-bindings/displayio/EPaperDisplay.c +#: shared-bindings/framebufferio/FramebufferDisplay.c +msgid "Display rotation must be in 90 degree increments" +msgstr "" + +#: shared-bindings/digitalio/DigitalInOut.c +msgid "Drive mode not used when direction is input." +msgstr "" + +#: shared-bindings/aesio/aes.c +msgid "ECB only operates on 16 bytes at a time" +msgstr "" + +#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c +#: ports/atmel-samd/common-hal/ps2io/Ps2.c +#: ports/atmel-samd/common-hal/pulseio/PulseIn.c +#: ports/cxd56/common-hal/pulseio/PulseIn.c +msgid "EXTINT channel already in use" +msgstr "" + +#: extmod/modure.c +msgid "Error in regex" +msgstr "" + +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c +#: shared-bindings/neopixel_write/__init__.c +#: shared-bindings/terminalio/Terminal.c +msgid "Expected a %q" +msgstr "" + +#: shared-bindings/_bleio/CharacteristicBuffer.c +#: shared-bindings/_bleio/Descriptor.c shared-bindings/_bleio/PacketBuffer.c +msgid "Expected a Characteristic" +msgstr "" + +#: shared-bindings/_bleio/Adapter.c +msgid "Expected a DigitalInOut" +msgstr "" + +#: shared-bindings/_bleio/Characteristic.c +msgid "Expected a Service" +msgstr "" + +#: shared-bindings/_bleio/Adapter.c +msgid "Expected a UART" +msgstr "" + +#: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c +#: shared-bindings/_bleio/Service.c +msgid "Expected a UUID" +msgstr "" + +#: shared-bindings/_bleio/Adapter.c +msgid "Expected an Address" +msgstr "" + +#: shared-module/_pixelbuf/PixelBuf.c +#, c-format +msgid "Expected tuple of length %d, got %d" +msgstr "" + +#: ports/nrf/common-hal/_bleio/Adapter.c +msgid "Extended advertisements with scan response not supported." +msgstr "" + +#: extmod/ulab/code/fft/fft.c +msgid "FFT is defined for ndarrays only" +msgstr "" + +#: shared-bindings/ps2io/Ps2.c +msgid "Failed sending command." +msgstr "" + +#: ports/nrf/sd_mutex.c +#, c-format +msgid "Failed to acquire mutex, err 0x%04x" +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +msgid "Failed to allocate RX buffer" +msgstr "" + +#: ports/atmel-samd/common-hal/busio/UART.c +#: ports/atmel-samd/common-hal/pulseio/PulseIn.c +#: ports/cxd56/common-hal/pulseio/PulseIn.c +#: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c +#, c-format +msgid "Failed to allocate RX buffer of %d bytes" +msgstr "" + +#: ports/nrf/common-hal/_bleio/Adapter.c +msgid "Failed to connect: internal error" +msgstr "" + +#: ports/nrf/common-hal/_bleio/Adapter.c +msgid "Failed to connect: timeout" +msgstr "" + +#: shared-module/audiomp3/MP3Decoder.c +msgid "Failed to parse MP3 file" +msgstr "" + +#: ports/nrf/sd_mutex.c +#, c-format +msgid "Failed to release mutex, err 0x%04x" +msgstr "" + +#: supervisor/shared/safe_mode.c +msgid "Failed to write internal flash." +msgstr "" + +#: py/moduerrno.c +msgid "File exists" +msgstr "" + +#: shared-module/framebufferio/FramebufferDisplay.c +#, c-format +msgid "Framebuffer requires %d bytes" +msgstr "" + +#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c +msgid "Frequency captured is above capability. Capture Paused." +msgstr "" + +#: ports/stm/common-hal/pwmio/PWMOut.c +msgid "Frequency must match existing PWMOut using this timer" +msgstr "" + +#: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c +#: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c +msgid "Function requires lock" +msgstr "" + +#: shared-bindings/displayio/Display.c +#: shared-bindings/displayio/EPaperDisplay.c +#: shared-bindings/framebufferio/FramebufferDisplay.c +msgid "Group already used" +msgstr "" + +#: shared-module/displayio/Group.c +msgid "Group full" +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c +#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/sdioio/SDCard.c +msgid "Hardware busy, try alternative pins" +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +msgid "Hardware in use, try alternative pins" +msgstr "" + +#: extmod/vfs_posix_file.c py/objstringio.c +msgid "I/O operation on closed file" +msgstr "" + +#: ports/stm/common-hal/busio/I2C.c +msgid "I2C Init Error" +msgstr "" + +#: shared-bindings/audiobusio/I2SOut.c +msgid "I2SOut not available" +msgstr "" + +#: shared-bindings/aesio/aes.c +#, c-format +msgid "IV must be %d bytes long" +msgstr "" + +#: py/persistentcode.c +msgid "" +"Incompatible .mpy file. Please update all .mpy files. See http://adafru.it/" +"mpy-update for more info." +msgstr "" + +#: shared-bindings/_pew/PewPew.c +msgid "Incorrect buffer size" +msgstr "" + +#: py/moduerrno.c +msgid "Input/output error" +msgstr "" + +#: ports/nrf/common-hal/_bleio/__init__.c +msgid "Insufficient authentication" +msgstr "" + +#: ports/nrf/common-hal/_bleio/__init__.c +msgid "Insufficient encryption" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Internal define error" +msgstr "" + +#: shared-module/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Internal error #%d" +msgstr "" + +#: shared-bindings/sdioio/SDCard.c +msgid "Invalid %q" +msgstr "" + +#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c +#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c +msgid "Invalid %q pin" +msgstr "" + +#: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c +#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/sdioio/SDCard.c +msgid "Invalid %q pin selection" +msgstr "" + +#: ports/stm/common-hal/analogio/AnalogIn.c +msgid "Invalid ADC Unit value" +msgstr "" + +#: shared-module/displayio/OnDiskBitmap.c +msgid "Invalid BMP file" +msgstr "" + +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "Invalid DAC pin supplied" +msgstr "" + +#: ports/atmel-samd/common-hal/pwmio/PWMOut.c +#: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c +#: shared-bindings/pwmio/PWMOut.c +msgid "Invalid PWM frequency" +msgstr "" + +#: py/moduerrno.c shared-module/rgbmatrix/RGBMatrix.c +msgid "Invalid argument" +msgstr "" + +#: shared-module/displayio/Bitmap.c +msgid "Invalid bits per value" +msgstr "" + +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +msgid "Invalid buffer size" +msgstr "" + +#: shared-bindings/_pixelbuf/PixelBuf.c +msgid "Invalid byteorder string" +msgstr "" + +#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c +msgid "Invalid capture period. Valid range: 1 - 500" +msgstr "" + +#: shared-bindings/audiomixer/Mixer.c +msgid "Invalid channel count" +msgstr "" + +#: shared-bindings/digitalio/DigitalInOut.c +msgid "Invalid direction." +msgstr "" + +#: shared-module/audiocore/WaveFile.c +msgid "Invalid file" +msgstr "" + +#: shared-module/audiocore/WaveFile.c +msgid "Invalid format chunk size" +msgstr "" + +#: ports/stm/common-hal/pwmio/PWMOut.c +msgid "Invalid frequency supplied" +msgstr "" + +#: supervisor/shared/safe_mode.c +msgid "Invalid memory access." +msgstr "" + +#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c +msgid "Invalid number of bits" +msgstr "" + +#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c +#: shared-bindings/displayio/FourWire.c +msgid "Invalid phase" +msgstr "" + +#: ports/atmel-samd/common-hal/audioio/AudioOut.c +#: ports/atmel-samd/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c +#: shared-module/rgbmatrix/RGBMatrix.c +msgid "Invalid pin" +msgstr "" + +#: ports/atmel-samd/common-hal/audioio/AudioOut.c +msgid "Invalid pin for left channel" +msgstr "" + +#: ports/atmel-samd/common-hal/audioio/AudioOut.c +msgid "Invalid pin for right channel" +msgstr "" + +#: ports/atmel-samd/common-hal/busio/I2C.c +#: ports/atmel-samd/common-hal/busio/SPI.c +#: ports/atmel-samd/common-hal/busio/UART.c +#: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c +#: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c +#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/SPI.c +#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c +msgid "Invalid pins" +msgstr "" + +#: ports/stm/common-hal/pwmio/PWMOut.c +msgid "Invalid pins for PWMOut" +msgstr "" + +#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c +#: shared-bindings/displayio/FourWire.c +msgid "Invalid polarity" +msgstr "" + +#: shared-bindings/_bleio/Characteristic.c +msgid "Invalid properties" +msgstr "" + +#: shared-bindings/microcontroller/__init__.c +msgid "Invalid run mode." +msgstr "" + +#: shared-module/_bleio/Attribute.c +msgid "Invalid security_mode" +msgstr "" + +#: shared-bindings/audiomixer/Mixer.c +msgid "Invalid voice" +msgstr "" + +#: shared-bindings/audiomixer/Mixer.c +msgid "Invalid voice count" +msgstr "" + +#: shared-module/audiocore/WaveFile.c +msgid "Invalid wave file" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "Invalid word/bit length" +msgstr "" + +#: shared-bindings/aesio/aes.c +msgid "Key must be 16, 24, or 32 bytes long" +msgstr "" + +#: py/compile.c +msgid "LHS of keyword arg must be an id" +msgstr "" + +#: shared-module/displayio/Group.c +msgid "Layer already in a group." +msgstr "" + +#: shared-module/displayio/Group.c +msgid "Layer must be a Group or TileGrid subclass." +msgstr "" + +#: py/objslice.c +msgid "Length must be an int" +msgstr "" + +#: py/objslice.c +msgid "Length must be non-negative" +msgstr "" + +#: shared-module/bitbangio/SPI.c +msgid "MISO pin init failed." +msgstr "" + +#: shared-module/bitbangio/SPI.c +msgid "MOSI pin init failed." +msgstr "" + +#: shared-module/displayio/Shape.c +#, c-format +msgid "Maximum x value when mirrored is %d" +msgstr "" + +#: supervisor/shared/safe_mode.c +msgid "MicroPython NLR jump failed. Likely memory corruption." +msgstr "" + +#: supervisor/shared/safe_mode.c +msgid "MicroPython fatal error." +msgstr "" + +#: shared-bindings/audiobusio/PDMIn.c +msgid "Microphone startup delay must be in range 0.0 to 1.0" +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +msgid "Missing MISO or MOSI Pin" +msgstr "" + +#: shared-bindings/displayio/Group.c +msgid "Must be a %q subclass." +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +msgid "Must provide MISO or MOSI pin" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "Must provide SCK pin" +msgstr "" + +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "Must use a multiple of 6 rgb pins, not %d" +msgstr "" + +#: py/parse.c +msgid "Name too long" +msgstr "" + +#: ports/nrf/common-hal/_bleio/Characteristic.c +msgid "No CCCD for this Characteristic" +msgstr "" + +#: ports/atmel-samd/common-hal/analogio/AnalogOut.c +#: ports/stm/common-hal/analogio/AnalogOut.c +msgid "No DAC on chip" +msgstr "" + +#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c +#: ports/atmel-samd/common-hal/audioio/AudioOut.c +msgid "No DMA channel found" +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +msgid "No MISO Pin" +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c +msgid "No MOSI Pin" +msgstr "" + +#: ports/atmel-samd/common-hal/busio/UART.c +#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c +msgid "No RX pin" +msgstr "" + +#: ports/atmel-samd/common-hal/busio/UART.c +#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: ports/stm/common-hal/busio/UART.c +msgid "No TX pin" +msgstr "" + +#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c +msgid "No available clocks" +msgstr "" + +#: shared-bindings/_bleio/PacketBuffer.c +msgid "No connection: length cannot be determined" +msgstr "" + +#: shared-bindings/board/__init__.c +msgid "No default %q bus" +msgstr "" + +#: ports/atmel-samd/common-hal/touchio/TouchIn.c +msgid "No free GCLKs" +msgstr "" + +#: shared-bindings/os/__init__.c +msgid "No hardware random available" +msgstr "" + +#: ports/atmel-samd/common-hal/ps2io/Ps2.c +msgid "No hardware support on clk pin" +msgstr "" + +#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c +#: ports/atmel-samd/common-hal/pulseio/PulseIn.c +msgid "No hardware support on pin" +msgstr "" + +#: shared-bindings/aesio/aes.c +msgid "No key was specified" +msgstr "" + +#: shared-bindings/time/__init__.c +msgid "No long integer support" +msgstr "" + +#: ports/stm/common-hal/pwmio/PWMOut.c +msgid "No more timers available on this pin." +msgstr "" + +#: shared-bindings/wifi/Radio.c +msgid "No network with that ssid" +msgstr "" + +#: shared-module/touchio/TouchIn.c +msgid "No pulldown on pin; 1Mohm recommended" +msgstr "" + +#: py/moduerrno.c +msgid "No space left on device" +msgstr "" + +#: py/moduerrno.c +msgid "No such file/directory" +msgstr "" + +#: shared-module/rgbmatrix/RGBMatrix.c +msgid "No timer available" +msgstr "" + +#: supervisor/shared/safe_mode.c +msgid "Nordic Soft Device failure assertion." +msgstr "" + +#: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c +msgid "Not a valid IP string" +msgstr "" + +#: ports/nrf/common-hal/_bleio/__init__.c +#: shared-bindings/_bleio/CharacteristicBuffer.c +msgid "Not connected" +msgstr "" + +#: shared-bindings/audiobusio/I2SOut.c shared-bindings/audioio/AudioOut.c +#: shared-bindings/audiopwmio/PWMAudioOut.c +msgid "Not playing" +msgstr "" + +#: main.c +msgid "Not running saved code.\n" +msgstr "" + +#: shared-bindings/_bleio/__init__.c +msgid "Not settable" +msgstr "" + +#: shared-bindings/util.c +msgid "" +"Object has been deinitialized and can no longer be used. Create a new object." +msgstr "" + +#: ports/nrf/common-hal/busio/UART.c +msgid "Odd parity is not supported" +msgstr "" + +#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c +msgid "Only 8 or 16 bit mono with " +msgstr "" + +#: shared-module/displayio/OnDiskBitmap.c +#, c-format +msgid "" +"Only Windows format, uncompressed BMP supported: given header size is %d" +msgstr "" + +#: shared-module/displayio/OnDiskBitmap.c +#, c-format +msgid "" +"Only monochrome, indexed 4bpp or 8bpp, and 16bpp or greater BMPs supported: " +"%d bpp given" +msgstr "" + +#: shared-bindings/ipaddress/__init__.c +msgid "Only raw int supported for ip" +msgstr "" + +#: shared-bindings/audiobusio/PDMIn.c +msgid "Oversample must be multiple of 8." +msgstr "" + +#: shared-bindings/pwmio/PWMOut.c +msgid "" +"PWM duty_cycle must be between 0 and 65535 inclusive (16 bit resolution)" +msgstr "" + +#: shared-bindings/pwmio/PWMOut.c +msgid "" +"PWM frequency not writable when variable_frequency is False on construction." +msgstr "" + +#: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c +#: ports/stm/common-hal/displayio/ParallelBus.c +msgid "ParallelBus not yet supported" +msgstr "" + +#: py/moduerrno.c +msgid "Permission denied" +msgstr "" + +#: ports/atmel-samd/common-hal/analogio/AnalogIn.c +#: ports/cxd56/common-hal/analogio/AnalogIn.c +#: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c +#: ports/nrf/common-hal/analogio/AnalogIn.c +#: ports/stm/common-hal/analogio/AnalogIn.c +msgid "Pin does not have ADC capabilities" +msgstr "" + +#: shared-bindings/digitalio/DigitalInOut.c +msgid "Pin is input only" +msgstr "" + +#: ports/atmel-samd/common-hal/countio/Counter.c +msgid "Pin must support hardware interrupts" +msgstr "" + +#: ports/stm/common-hal/pulseio/PulseIn.c +msgid "Pin number already reserved by EXTI" +msgstr "" + +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "" +"Pinout uses %d bytes per element, which consumes more than the ideal %d " +"bytes. If this cannot be avoided, pass allow_inefficient=True to the " +"constructor" +msgstr "" + +#: py/builtinhelp.c +msgid "Plus any modules on the filesystem\n" +msgstr "" + +#: shared-module/vectorio/Polygon.c +msgid "Polygon needs at least 3 points" +msgstr "" + +#: ports/atmel-samd/common-hal/pulseio/PulseOut.c +#: ports/cxd56/common-hal/pulseio/PulseOut.c +#: ports/nrf/common-hal/pulseio/PulseOut.c +#: ports/stm/common-hal/pulseio/PulseOut.c +msgid "" +"Port does not accept pins or frequency. Construct and pass a PWMOut Carrier " +"instead" +msgstr "" + +#: shared-bindings/_bleio/Adapter.c +msgid "Prefix buffer must be on the heap" +msgstr "" + +#: main.c +msgid "Press any key to enter the REPL. Use CTRL-D to reload." +msgstr "" + +#: shared-bindings/digitalio/DigitalInOut.c +msgid "Pull not used when direction is output." +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG DeInit Error" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "RNG Init Error" +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/UART.c +msgid "RS485 inversion specified when not in RS485 mode" +msgstr "" + +#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c +#: ports/nrf/common-hal/rtc/RTC.c +msgid "RTC calibration is not supported on this board" +msgstr "" + +#: shared-bindings/time/__init__.c +msgid "RTC is not supported on this board" +msgstr "" + +#: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c +#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +msgid "RTS/CTS/RS485 Not yet supported on this device" +msgstr "" + +#: ports/stm/common-hal/os/__init__.c +msgid "Random number generation error" +msgstr "" + +#: shared-bindings/memorymonitor/AllocationSize.c +#: shared-bindings/pulseio/PulseIn.c +msgid "Read-only" +msgstr "" + +#: extmod/vfs_fat.c py/moduerrno.c +msgid "Read-only filesystem" +msgstr "" + +#: shared-module/displayio/Bitmap.c +msgid "Read-only object" +msgstr "" + +#: shared-bindings/displayio/EPaperDisplay.c +msgid "Refresh too soon" +msgstr "" + +#: shared-bindings/aesio/aes.c +msgid "Requested AES mode is unsupported" +msgstr "" + +#: ports/atmel-samd/common-hal/audioio/AudioOut.c +msgid "Right channel unsupported" +msgstr "" + +#: shared-bindings/_pew/PewPew.c +msgid "Row entry must be digitalio.DigitalInOut" +msgstr "" + +#: main.c +msgid "Running in safe mode! " +msgstr "" + +#: shared-module/sdcardio/SDCard.c +msgid "SD card CSD format not supported" +msgstr "" + +#: ports/atmel-samd/common-hal/busio/I2C.c +#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c +msgid "SDA or SCL needs a pull up" +msgstr "" + +#: ports/stm/common-hal/sdioio/SDCard.c +#, c-format +msgid "SDIO GetCardInfo Error %d" +msgstr "" + +#: ports/stm/common-hal/sdioio/SDCard.c +#, c-format +msgid "SDIO Init Error %d" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/SPI.c +msgid "SPI Re-initialization error" +msgstr "" + +#: shared-bindings/audiomixer/Mixer.c +msgid "Sample rate must be positive" +msgstr "" + +#: ports/atmel-samd/common-hal/audioio/AudioOut.c +#, c-format +msgid "Sample rate too high. It must be less than %d" +msgstr "" + +#: ports/nrf/common-hal/_bleio/Adapter.c +msgid "Scan already in progess. Stop with stop_scan." +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/UART.c +msgid "Selected CTS pin not valid" +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/UART.c +msgid "Selected RTS pin not valid" +msgstr "" + +#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c +#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c +msgid "Serializer in use" +msgstr "" + +#: shared-bindings/ssl/SSLContext.c +msgid "Server side context cannot have hostname" +msgstr "" + +#: shared-bindings/nvm/ByteArray.c +msgid "Slice and value different lengths." +msgstr "" + +#: shared-bindings/displayio/Bitmap.c shared-bindings/displayio/Group.c +#: shared-bindings/displayio/TileGrid.c +#: shared-bindings/memorymonitor/AllocationSize.c +#: shared-bindings/pulseio/PulseIn.c +msgid "Slices not supported" +msgstr "" + +#: shared-bindings/aesio/aes.c +msgid "Source and destination buffers must be the same length" +msgstr "" + +#: extmod/modure.c +msgid "Splitting with sub-captures" +msgstr "" + +#: shared-bindings/supervisor/__init__.c +msgid "Stack size must be at least 256" +msgstr "" + +#: shared-bindings/multiterminal/__init__.c +msgid "Stream missing readinto() or write() method." +msgstr "" + +#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c +msgid "Supply at least one UART pin" +msgstr "" + +#: shared-bindings/gnss/GNSS.c +msgid "System entry must be gnss.SatelliteSystem" +msgstr "" + +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Temperature read timed out" +msgstr "" + +#: supervisor/shared/safe_mode.c +msgid "" +"The CircuitPython heap was corrupted because the stack was too small.\n" +"Please increase the stack size if you know how, or if not:" +msgstr "" + +#: supervisor/shared/safe_mode.c +msgid "" +"The `microcontroller` module was used to boot into safe mode. Press reset to " +"exit safe mode.\n" +msgstr "" + +#: supervisor/shared/safe_mode.c +msgid "" +"The microcontroller's power dipped. Make sure your power supply provides\n" +"enough power for the whole circuit and press reset (after ejecting " +"CIRCUITPY).\n" +msgstr "" + +#: shared-module/audiomixer/MixerVoice.c +msgid "The sample's bits_per_sample does not match the mixer's" +msgstr "" + +#: shared-module/audiomixer/MixerVoice.c +msgid "The sample's channel count does not match the mixer's" +msgstr "" + +#: shared-module/audiomixer/MixerVoice.c +msgid "The sample's sample rate does not match the mixer's" +msgstr "" + +#: shared-module/audiomixer/MixerVoice.c +msgid "The sample's signedness does not match the mixer's" +msgstr "" + +#: shared-bindings/displayio/TileGrid.c +msgid "Tile height must exactly divide bitmap height" +msgstr "" + +#: shared-bindings/displayio/TileGrid.c shared-module/displayio/TileGrid.c +msgid "Tile index out of bounds" +msgstr "" + +#: shared-bindings/displayio/TileGrid.c +msgid "Tile value out of bounds" +msgstr "" + +#: shared-bindings/displayio/TileGrid.c +msgid "Tile width must exactly divide bitmap width" +msgstr "" + +#: ports/nrf/common-hal/_bleio/Adapter.c +#, c-format +msgid "Timeout is too long: Maximum timeout length is %d seconds" +msgstr "" + +#: ports/stm/common-hal/pwmio/PWMOut.c +msgid "" +"Timer was reserved for internal use - declare PWM pins earlier in the program" +msgstr "" + +#: supervisor/shared/safe_mode.c +msgid "To exit, please reset the board without " +msgstr "" + +#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c +msgid "Too many channels in sample." +msgstr "" + +#: shared-module/displayio/__init__.c +msgid "Too many display busses" +msgstr "" + +#: shared-module/displayio/__init__.c +msgid "Too many displays" +msgstr "" + +#: ports/nrf/common-hal/_bleio/PacketBuffer.c +msgid "Total data to write is larger than outgoing_packet_length" +msgstr "" + +#: py/obj.c +msgid "Traceback (most recent call last):\n" +msgstr "" + +#: shared-bindings/time/__init__.c +msgid "Tuple or struct_time argument required" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Buffer allocation error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART De-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Init Error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART Re-init error" +msgstr "" + +#: ports/stm/common-hal/busio/UART.c +msgid "UART write error" +msgstr "" + +#: shared-module/usb_hid/Device.c +msgid "USB Busy" +msgstr "" + +#: shared-module/usb_hid/Device.c +msgid "USB Error" +msgstr "" + +#: shared-bindings/_bleio/UUID.c +msgid "UUID integer value must be 0-0xffff" +msgstr "" + +#: shared-bindings/_bleio/UUID.c +msgid "UUID string not 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'" +msgstr "" + +#: shared-bindings/_bleio/UUID.c +msgid "UUID value is not str, int or byte buffer" +msgstr "" + +#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c +#: ports/atmel-samd/common-hal/audioio/AudioOut.c +msgid "Unable to allocate buffers for signed conversion" +msgstr "" + +#: shared-module/displayio/I2CDisplay.c +#, c-format +msgid "Unable to find I2C Display at %x" +msgstr "" + +#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c +#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c +msgid "Unable to find free GCLK" +msgstr "" + +#: py/parse.c +msgid "Unable to init parser" +msgstr "" + +#: shared-module/displayio/OnDiskBitmap.c +msgid "Unable to read color palette data" +msgstr "" + +#: shared-bindings/nvm/ByteArray.c +msgid "Unable to write to nvm." +msgstr "" + +#: ports/nrf/common-hal/_bleio/UUID.c +msgid "Unexpected nrfx uuid type" +msgstr "" + +#: shared-bindings/wifi/Radio.c +msgid "Unknown failure" +msgstr "" + +#: ports/nrf/common-hal/_bleio/__init__.c +#, c-format +msgid "Unknown gatt error: 0x%04x" +msgstr "" + +#: supervisor/shared/safe_mode.c +msgid "Unknown reason." +msgstr "" + +#: ports/nrf/common-hal/_bleio/__init__.c +#, c-format +msgid "Unknown security error: 0x%04x" +msgstr "" + +#: ports/nrf/common-hal/_bleio/__init__.c +#, c-format +msgid "Unknown soft device error: %04x" +msgstr "" + +#: shared-bindings/_pixelbuf/PixelBuf.c +#, c-format +msgid "Unmatched number of items on RHS (expected %d, got %d)." +msgstr "" + +#: ports/nrf/common-hal/_bleio/__init__.c +msgid "" +"Unspecified issue. Can be that the pairing prompt on the other device was " +"declined or ignored." +msgstr "" + +#: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c +#: ports/stm/common-hal/busio/I2C.c +msgid "Unsupported baudrate" +msgstr "" + +#: shared-module/displayio/display_core.c +msgid "Unsupported display bus type" +msgstr "" + +#: shared-module/audiocore/WaveFile.c +msgid "Unsupported format" +msgstr "" + +#: py/moduerrno.c +msgid "Unsupported operation" +msgstr "" + +#: shared-bindings/digitalio/DigitalInOut.c +msgid "Unsupported pull value." +msgstr "" + +#: ports/nrf/common-hal/_bleio/Characteristic.c +#: ports/nrf/common-hal/_bleio/Descriptor.c +msgid "Value length != required fixed length" +msgstr "" + +#: ports/nrf/common-hal/_bleio/Characteristic.c +#: ports/nrf/common-hal/_bleio/Descriptor.c +msgid "Value length > max_length" +msgstr "" + +#: py/emitnative.c +msgid "Viper functions don't currently support more than 4 arguments" +msgstr "" + +#: ports/stm/common-hal/microcontroller/Processor.c +msgid "Voltage read timed out" +msgstr "" + +#: main.c +msgid "WARNING: Your code filename has two extensions\n" +msgstr "" + +#: shared-bindings/watchdog/WatchDogTimer.c +msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" +msgstr "" + +#: shared-bindings/watchdog/WatchDogTimer.c +msgid "WatchDogTimer is not currently running" +msgstr "" + +#: shared-bindings/watchdog/WatchDogTimer.c +msgid "WatchDogTimer.mode cannot be changed once set to WatchDogMode.RESET" +msgstr "" + +#: shared-bindings/watchdog/WatchDogTimer.c +msgid "WatchDogTimer.timeout must be greater than 0" +msgstr "" + +#: supervisor/shared/safe_mode.c +msgid "Watchdog timer expired." +msgstr "" + +#: py/builtinhelp.c +#, c-format +msgid "" +"Welcome to Adafruit CircuitPython %s!\n" +"\n" +"Please visit learn.adafruit.com/category/circuitpython for project guides.\n" +"\n" +"To list built-in modules please do `help(\"modules\")`.\n" +msgstr "" + +#: shared-bindings/wifi/Radio.c +msgid "WiFi password must be between 8 and 63 characters" +msgstr "" + +#: ports/nrf/common-hal/_bleio/PacketBuffer.c +msgid "Writes not supported on Characteristic" +msgstr "" + +#: supervisor/shared/safe_mode.c +msgid "You are in safe mode: something unanticipated happened.\n" +msgstr "" + +#: supervisor/shared/safe_mode.c +msgid "You requested starting safe mode by " +msgstr "" + +#: py/objtype.c +msgid "__init__() should return None" +msgstr "" + +#: py/objtype.c +msgid "__init__() should return None, not '%q'" +msgstr "" + +#: py/objobject.c +msgid "__new__ arg must be a user-type" +msgstr "" + +#: extmod/modubinascii.c extmod/moduhashlib.c py/objarray.c +msgid "a bytes-like object is required" +msgstr "" + +#: lib/embed/abort_.c +msgid "abort() called" +msgstr "" + +#: extmod/machine_mem.c +#, c-format +msgid "address %08x is not aligned to %d bytes" +msgstr "" + +#: shared-bindings/i2cperipheral/I2CPeripheral.c +msgid "address out of bounds" +msgstr "" + +#: shared-bindings/i2cperipheral/I2CPeripheral.c +msgid "addresses is empty" +msgstr "" + +#: extmod/ulab/code/vector/vectorise.c +msgid "arctan2 is implemented for scalars and ndarrays only" +msgstr "" + +#: py/modbuiltins.c +msgid "arg is an empty sequence" +msgstr "" + +#: extmod/ulab/code/numerical/numerical.c +msgid "argsort argument must be an ndarray" +msgstr "" + +#: py/runtime.c +msgid "argument has wrong type" +msgstr "" + +#: extmod/ulab/code/linalg/linalg.c +msgid "argument must be ndarray" +msgstr "" + +#: py/argcheck.c shared-bindings/_stage/__init__.c +#: shared-bindings/digitalio/DigitalInOut.c shared-bindings/gamepad/GamePad.c +msgid "argument num/types mismatch" +msgstr "" + +#: py/runtime.c +msgid "argument should be a '%q' not a '%q'" +msgstr "" + +#: extmod/ulab/code/linalg/linalg.c +msgid "arguments must be ndarrays" +msgstr "" + +#: py/objarray.c shared-bindings/nvm/ByteArray.c +msgid "array/bytes required on right side" +msgstr "" + +#: extmod/ulab/code/numerical/numerical.c +msgid "attempt to get argmin/argmax of an empty sequence" +msgstr "" + +#: py/objstr.c +msgid "attributes not supported yet" +msgstr "" + +#: extmod/ulab/code/numerical/numerical.c +msgid "axis must be -1, 0, None, or 1" +msgstr "" + +#: extmod/ulab/code/numerical/numerical.c +msgid "axis must be -1, 0, or 1" +msgstr "" + +#: extmod/ulab/code/numerical/numerical.c +msgid "axis must be None, 0, or 1" +msgstr "" + +#: py/builtinevex.c +msgid "bad compile mode" +msgstr "" + +#: py/objstr.c +msgid "bad conversion specifier" +msgstr "" + +#: py/objstr.c +msgid "bad format string" +msgstr "" + +#: py/binary.c py/objarray.c +msgid "bad typecode" +msgstr "" + +#: py/emitnative.c +msgid "binary op %q not implemented" +msgstr "" + +#: shared-bindings/busio/UART.c +msgid "bits must be 7, 8 or 9" +msgstr "" + +#: shared-bindings/audiomixer/Mixer.c +msgid "bits_per_sample must be 8 or 16" +msgstr "" + +#: py/emitinlinethumb.c +msgid "branch not in range" +msgstr "" + +#: shared-bindings/audiocore/RawSample.c +msgid "buffer must be a bytes-like object" +msgstr "" + +#: shared-module/struct/__init__.c +msgid "buffer size must match format" +msgstr "" + +#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c +msgid "buffer slices must be of equal length" +msgstr "" + +#: py/modstruct.c shared-bindings/struct/__init__.c +#: shared-module/struct/__init__.c +msgid "buffer too small" +msgstr "" + +#: shared-bindings/_pew/PewPew.c +msgid "buttons must be digitalio.DigitalInOut" +msgstr "" + +#: py/vm.c +msgid "byte code not implemented" +msgstr "" + +#: shared-bindings/_pixelbuf/PixelBuf.c +msgid "byteorder is not a string" +msgstr "" + +#: ports/atmel-samd/common-hal/busio/UART.c +msgid "bytes > 8 bits not supported" +msgstr "" + +#: py/objarray.c +msgid "bytes length not a multiple of item size" +msgstr "" + +#: py/objstr.c +msgid "bytes value out of range" +msgstr "" + +#: ports/atmel-samd/bindings/samd/Clock.c ports/atmel-samd/common-hal/rtc/RTC.c +msgid "calibration is out of range" +msgstr "" + +#: ports/atmel-samd/bindings/samd/Clock.c +msgid "calibration is read only" +msgstr "" + +#: ports/atmel-samd/common-hal/rtc/RTC.c +msgid "calibration value out of range +/-127" +msgstr "" + +#: py/emitinlinethumb.c +msgid "can only have up to 4 parameters to Thumb assembly" +msgstr "" + +#: py/emitinlinextensa.c +msgid "can only have up to 4 parameters to Xtensa assembly" +msgstr "" + +#: py/persistentcode.c +msgid "can only save bytecode" +msgstr "" + +#: py/objtype.c +msgid "can't add special method to already-subclassed class" +msgstr "" + +#: py/compile.c +msgid "can't assign to expression" +msgstr "" + +#: py/obj.c py/objint.c shared-bindings/i2cperipheral/I2CPeripheral.c +#: shared-module/_pixelbuf/PixelBuf.c +msgid "can't convert %q to %q" +msgstr "" + +#: py/objstr.c +msgid "can't convert '%q' object to %q implicitly" +msgstr "" + +#: py/obj.c +msgid "can't convert to %q" +msgstr "" + +#: py/objstr.c +msgid "can't convert to str implicitly" +msgstr "" + +#: py/compile.c +msgid "can't declare nonlocal in outer code" +msgstr "" + +#: py/compile.c +msgid "can't delete expression" +msgstr "" + +#: py/emitnative.c +msgid "can't do binary op between '%q' and '%q'" +msgstr "" + +#: py/objcomplex.c +msgid "can't do truncated division of a complex number" +msgstr "" + +#: py/compile.c +msgid "can't have multiple **x" +msgstr "" + +#: py/compile.c +msgid "can't have multiple *x" +msgstr "" + +#: py/emitnative.c +msgid "can't implicitly convert '%q' to 'bool'" +msgstr "" + +#: py/emitnative.c +msgid "can't load from '%q'" +msgstr "" + +#: py/emitnative.c +msgid "can't load with '%q' index" +msgstr "" + +#: py/objgenerator.c +msgid "can't pend throw to just-started generator" +msgstr "" + +#: py/objgenerator.c +msgid "can't send non-None value to a just-started generator" +msgstr "" + +#: shared-module/sdcardio/SDCard.c +msgid "can't set 512 block size" +msgstr "" + +#: py/objnamedtuple.c +msgid "can't set attribute" +msgstr "" + +#: py/emitnative.c +msgid "can't store '%q'" +msgstr "" + +#: py/emitnative.c +msgid "can't store to '%q'" +msgstr "" + +#: py/emitnative.c +msgid "can't store with '%q' index" +msgstr "" + +#: py/objstr.c +msgid "" +"can't switch from automatic field numbering to manual field specification" +msgstr "" + +#: py/objstr.c +msgid "" +"can't switch from manual field specification to automatic field numbering" +msgstr "" + +#: py/objtype.c +msgid "cannot create '%q' instances" +msgstr "" + +#: py/objtype.c +msgid "cannot create instance" +msgstr "" + +#: py/runtime.c +msgid "cannot import name %q" +msgstr "" + +#: py/builtinimport.c +msgid "cannot perform relative import" +msgstr "" + +#: extmod/ulab/code/ndarray.c +msgid "cannot reshape array (incompatible input/output shape)" +msgstr "" + +#: py/emitnative.c +msgid "casting" +msgstr "" + +#: shared-bindings/_stage/Text.c +msgid "chars buffer too small" +msgstr "" + +#: py/modbuiltins.c +msgid "chr() arg not in range(0x110000)" +msgstr "" + +#: py/modbuiltins.c +msgid "chr() arg not in range(256)" +msgstr "" + +#: shared-module/vectorio/Circle.c +msgid "circle can only be registered in one parent" +msgstr "" + +#: shared-bindings/displayio/Palette.c +msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)" +msgstr "" + +#: shared-bindings/displayio/Palette.c +msgid "color buffer must be a buffer, tuple, list, or int" +msgstr "" + +#: shared-bindings/displayio/Palette.c +msgid "color buffer must be a bytearray or array of type 'b' or 'B'" +msgstr "" + +#: shared-bindings/displayio/Palette.c +msgid "color must be between 0x000000 and 0xffffff" +msgstr "" + +#: shared-bindings/displayio/ColorConverter.c +msgid "color should be an int" +msgstr "" + +#: py/objcomplex.c +msgid "complex division by zero" +msgstr "" + +#: py/objfloat.c py/parsenum.c +msgid "complex values not supported" +msgstr "" + +#: extmod/moduzlib.c +msgid "compression header" +msgstr "" + +#: py/parse.c +msgid "constant must be an integer" +msgstr "" + +#: py/emitnative.c +msgid "conversion to object" +msgstr "" + +#: extmod/ulab/code/filter/filter.c +msgid "convolve arguments must be linear arrays" +msgstr "" + +#: extmod/ulab/code/filter/filter.c +msgid "convolve arguments must be ndarrays" +msgstr "" + +#: extmod/ulab/code/filter/filter.c +msgid "convolve arguments must not be empty" +msgstr "" + +#: extmod/ulab/code/ndarray.c +msgid "could not broadast input array from shape" +msgstr "" + +#: extmod/ulab/code/poly/poly.c +msgid "could not invert Vandermonde matrix" +msgstr "" + +#: shared-module/sdcardio/SDCard.c +msgid "couldn't determine SD card version" +msgstr "" + +#: extmod/ulab/code/approx/approx.c +msgid "data must be iterable" +msgstr "" + +#: extmod/ulab/code/approx/approx.c +msgid "data must be of equal length" +msgstr "" + +#: extmod/ulab/code/numerical/numerical.c +msgid "ddof must be smaller than length of data set" +msgstr "" + +#: py/parsenum.c +msgid "decimal numbers not supported" +msgstr "" + +#: py/compile.c +msgid "default 'except' must be last" +msgstr "" + +#: shared-bindings/audiobusio/PDMIn.c +msgid "" +"destination buffer must be a bytearray or array of type 'B' for bit_depth = 8" +msgstr "" + +#: shared-bindings/audiobusio/PDMIn.c +msgid "destination buffer must be an array of type 'H' for bit_depth = 16" +msgstr "" + +#: shared-bindings/audiobusio/PDMIn.c +msgid "destination_length must be an int >= 0" +msgstr "" + +#: py/objdict.c +msgid "dict update sequence has wrong length" +msgstr "" + +#: extmod/ulab/code/numerical/numerical.c +msgid "diff argument must be an ndarray" +msgstr "" + +#: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c +#: shared-bindings/math/__init__.c +msgid "division by zero" +msgstr "" + +#: py/objdeque.c +msgid "empty" +msgstr "" + +#: extmod/moduheapq.c extmod/modutimeq.c +msgid "empty heap" +msgstr "" + +#: py/objstr.c +msgid "empty separator" +msgstr "" + +#: shared-bindings/random/__init__.c +msgid "empty sequence" +msgstr "" + +#: py/objstr.c +msgid "end of format while looking for conversion specifier" +msgstr "" + +#: shared-bindings/displayio/Shape.c +msgid "end_x should be an int" +msgstr "" + +#: ports/nrf/common-hal/busio/UART.c +#, c-format +msgid "error = 0x%08lX" +msgstr "" + +#: py/runtime.c +msgid "exceptions must derive from BaseException" +msgstr "" + +#: py/objstr.c +msgid "expected ':' after format specifier" +msgstr "" + +#: py/obj.c +msgid "expected tuple/list" +msgstr "" + +#: py/modthread.c +msgid "expecting a dict for keyword args" +msgstr "" + +#: py/compile.c +msgid "expecting an assembler instruction" +msgstr "" + +#: py/compile.c +msgid "expecting just a value for set" +msgstr "" + +#: py/compile.c +msgid "expecting key:value for dict" +msgstr "" + +#: py/argcheck.c +msgid "extra keyword arguments given" +msgstr "" + +#: py/argcheck.c +msgid "extra positional arguments given" +msgstr "" + +#: py/parse.c +msgid "f-string expression part cannot include a '#'" +msgstr "" + +#: py/parse.c +msgid "f-string expression part cannot include a backslash" +msgstr "" + +#: py/parse.c +msgid "f-string: empty expression not allowed" +msgstr "" + +#: py/parse.c +msgid "f-string: expecting '}'" +msgstr "" + +#: py/parse.c +msgid "f-string: single '}' is not allowed" +msgstr "" + +#: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3Decoder.c +#: shared-bindings/displayio/OnDiskBitmap.c +msgid "file must be a file opened in byte mode" +msgstr "" + +#: shared-bindings/storage/__init__.c +msgid "filesystem must provide mount method" +msgstr "" + +#: extmod/ulab/code/vector/vectorise.c +msgid "first argument must be a callable" +msgstr "" + +#: extmod/ulab/code/approx/approx.c +msgid "first argument must be a function" +msgstr "" + +#: extmod/ulab/code/ndarray.c +msgid "first argument must be an iterable" +msgstr "" + +#: extmod/ulab/code/vector/vectorise.c +msgid "first argument must be an ndarray" +msgstr "" + +#: py/objtype.c +msgid "first argument to super() must be type" +msgstr "" + +#: extmod/ulab/code/ndarray.c +msgid "flattening order must be either 'C', or 'F'" +msgstr "" + +#: extmod/ulab/code/numerical/numerical.c +msgid "flip argument must be an ndarray" +msgstr "" + +#: py/objint.c +msgid "float too big" +msgstr "" + +#: shared-bindings/_stage/Text.c +msgid "font must be 2048 bytes long" +msgstr "" + +#: py/objstr.c +msgid "format requires a dict" +msgstr "" + +#: py/objdeque.c +msgid "full" +msgstr "" + +#: py/argcheck.c +msgid "function does not take keyword arguments" +msgstr "" + +#: py/argcheck.c +#, c-format +msgid "function expected at most %d arguments, got %d" +msgstr "" + +#: py/bc.c py/objnamedtuple.c +msgid "function got multiple values for argument '%q'" +msgstr "" + +#: extmod/ulab/code/approx/approx.c +msgid "function has the same sign at the ends of interval" +msgstr "" + +#: extmod/ulab/code/compare/compare.c +msgid "function is implemented for scalars and ndarrays only" +msgstr "" + +#: py/argcheck.c +#, c-format +msgid "function missing %d required positional arguments" +msgstr "" + +#: py/bc.c +msgid "function missing keyword-only argument" +msgstr "" + +#: py/bc.c +msgid "function missing required keyword argument '%q'" +msgstr "" + +#: py/bc.c +#, c-format +msgid "function missing required positional argument #%d" +msgstr "" + +#: py/argcheck.c py/bc.c py/objnamedtuple.c shared-bindings/time/__init__.c +#, c-format +msgid "function takes %d positional arguments but %d were given" +msgstr "" + +#: shared-bindings/time/__init__.c +msgid "function takes exactly 9 arguments" +msgstr "" + +#: py/objgenerator.c +msgid "generator already executing" +msgstr "" + +#: py/objgenerator.c +msgid "generator ignored GeneratorExit" +msgstr "" + +#: shared-bindings/_stage/Layer.c +msgid "graphic must be 2048 bytes long" +msgstr "" + +#: extmod/moduheapq.c +msgid "heap must be a list" +msgstr "" + +#: py/compile.c +msgid "identifier redefined as global" +msgstr "" + +#: py/compile.c +msgid "identifier redefined as nonlocal" +msgstr "" + +#: py/objstr.c +msgid "incomplete format" +msgstr "" + +#: py/objstr.c +msgid "incomplete format key" +msgstr "" + +#: extmod/modubinascii.c +msgid "incorrect padding" +msgstr "" + +#: extmod/ulab/code/ndarray.c +msgid "index is out of bounds" +msgstr "" + +#: py/obj.c +msgid "index out of range" +msgstr "" + +#: py/obj.c +msgid "indices must be integers" +msgstr "" + +#: extmod/ulab/code/ndarray.c +msgid "indices must be integers, slices, or Boolean lists" +msgstr "" + +#: extmod/ulab/code/approx/approx.c +msgid "initial values must be iterable" +msgstr "" + +#: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c +msgid "initial_value length is wrong" +msgstr "" + +#: py/compile.c +msgid "inline assembler must be a function" +msgstr "" + +#: extmod/ulab/code/ulab_create.c +msgid "input argument must be an integer or a 2-tuple" +msgstr "" + +#: extmod/ulab/code/fft/fft.c +msgid "input array length must be power of 2" +msgstr "" + +#: extmod/ulab/code/poly/poly.c +msgid "input data must be an iterable" +msgstr "" + +#: extmod/ulab/code/linalg/linalg.c +msgid "input matrix is asymmetric" +msgstr "" + +#: extmod/ulab/code/linalg/linalg.c +msgid "input matrix is singular" +msgstr "" + +#: extmod/ulab/code/linalg/linalg.c +msgid "input must be square matrix" +msgstr "" + +#: extmod/ulab/code/numerical/numerical.c +msgid "input must be tuple, list, range, or ndarray" +msgstr "" + +#: extmod/ulab/code/poly/poly.c +msgid "input vectors must be of equal length" +msgstr "" + +#: py/parsenum.c +msgid "int() arg 2 must be >= 2 and <= 36" +msgstr "" + +#: py/objstr.c +msgid "integer required" +msgstr "" + +#: extmod/ulab/code/approx/approx.c +msgid "interp is defined for 1D arrays of equal length" +msgstr "" + +#: shared-bindings/_bleio/Adapter.c +#, c-format +msgid "interval must be in range %s-%s" +msgstr "" + +#: lib/netutils/netutils.c +msgid "invalid arguments" +msgstr "" + +#: extmod/modussl_axtls.c +msgid "invalid cert" +msgstr "" + +#: extmod/uos_dupterm.c +msgid "invalid dupterm index" +msgstr "" + +#: extmod/modframebuf.c +msgid "invalid format" +msgstr "" + +#: py/objstr.c +msgid "invalid format specifier" +msgstr "" + +#: extmod/modussl_axtls.c +msgid "invalid key" +msgstr "" + +#: py/compile.c +msgid "invalid micropython decorator" +msgstr "" + +#: shared-bindings/random/__init__.c +msgid "invalid step" +msgstr "" + +#: py/compile.c py/parse.c +msgid "invalid syntax" +msgstr "" + +#: py/parsenum.c +msgid "invalid syntax for integer" +msgstr "" + +#: py/parsenum.c +#, c-format +msgid "invalid syntax for integer with base %d" +msgstr "" + +#: py/parsenum.c +msgid "invalid syntax for number" +msgstr "" + +#: py/objtype.c +msgid "issubclass() arg 1 must be a class" +msgstr "" + +#: py/objtype.c +msgid "issubclass() arg 2 must be a class or a tuple of classes" +msgstr "" + +#: extmod/ulab/code/ndarray.c +msgid "iterables are not of the same length" +msgstr "" + +#: extmod/ulab/code/linalg/linalg.c +msgid "iterations did not converge" +msgstr "" + +#: py/objstr.c +msgid "join expects a list of str/bytes objects consistent with self object" +msgstr "" + +#: py/argcheck.c +msgid "keyword argument(s) not yet implemented - use normal args instead" +msgstr "" + +#: py/bc.c +msgid "keywords must be strings" +msgstr "" + +#: py/emitinlinethumb.c py/emitinlinextensa.c +msgid "label '%q' not defined" +msgstr "" + +#: py/compile.c +msgid "label redefined" +msgstr "" + +#: py/stream.c +msgid "length argument not allowed for this type" +msgstr "" + +#: shared-bindings/audiomixer/MixerVoice.c +msgid "level must be between 0 and 1" +msgstr "" + +#: py/objarray.c +msgid "lhs and rhs should be compatible" +msgstr "" + +#: py/emitnative.c +msgid "local '%q' has type '%q' but source is '%q'" +msgstr "" + +#: py/emitnative.c +msgid "local '%q' used before type known" +msgstr "" + +#: py/vm.c +msgid "local variable referenced before assignment" +msgstr "" + +#: py/objint.c +msgid "long int not supported in this build" +msgstr "" + +#: py/parse.c +msgid "malformed f-string" +msgstr "" + +#: shared-bindings/_stage/Layer.c +msgid "map buffer too small" +msgstr "" + +#: py/modmath.c shared-bindings/math/__init__.c +msgid "math domain error" +msgstr "" + +#: extmod/ulab/code/linalg/linalg.c +msgid "matrix dimensions do not match" +msgstr "" + +#: extmod/ulab/code/linalg/linalg.c +msgid "matrix is not positive definite" +msgstr "" + +#: ports/nrf/common-hal/_bleio/Characteristic.c +#: ports/nrf/common-hal/_bleio/Descriptor.c +#, c-format +msgid "max_length must be 0-%d when fixed_length is %s" +msgstr "" + +#: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c +msgid "max_length must be > 0" +msgstr "" + +#: py/runtime.c +msgid "maximum recursion depth exceeded" +msgstr "" + +#: py/runtime.c +#, c-format +msgid "memory allocation failed, allocating %u bytes" +msgstr "" + +#: py/runtime.c +msgid "memory allocation failed, heap is locked" +msgstr "" + +#: py/builtinimport.c +msgid "module not found" +msgstr "" + +#: extmod/ulab/code/poly/poly.c +msgid "more degrees of freedom than data points" +msgstr "" + +#: py/compile.c +msgid "multiple *x in assignment" +msgstr "" + +#: py/objtype.c +msgid "multiple bases have instance lay-out conflict" +msgstr "" + +#: py/objtype.c +msgid "multiple inheritance not supported" +msgstr "" + +#: py/emitnative.c +msgid "must raise an object" +msgstr "" + +#: py/modbuiltins.c +msgid "must use keyword argument for key function" +msgstr "" + +#: extmod/ulab/code/numerical/numerical.c +msgid "n must be between 0, and 9" +msgstr "" + +#: py/runtime.c +msgid "name '%q' is not defined" +msgstr "" + +#: py/runtime.c +msgid "name not defined" +msgstr "" + +#: py/compile.c +msgid "name reused for argument" +msgstr "" + +#: py/emitnative.c +msgid "native yield" +msgstr "" + +#: py/runtime.c +#, c-format +msgid "need more than %d values to unpack" +msgstr "" + +#: py/objint_longlong.c py/objint_mpz.c py/runtime.c +msgid "negative power with no float support" +msgstr "" + +#: py/objint_mpz.c py/runtime.c +msgid "negative shift count" +msgstr "" + +#: shared-module/sdcardio/SDCard.c +msgid "no SD card" +msgstr "" + +#: py/vm.c +msgid "no active exception to reraise" +msgstr "" + +#: shared-bindings/socket/__init__.c shared-module/network/__init__.c +msgid "no available NIC" +msgstr "" + +#: py/compile.c +msgid "no binding for nonlocal found" +msgstr "" + +#: py/builtinimport.c +msgid "no module named '%q'" +msgstr "" + +#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c +#: shared-bindings/displayio/ParallelBus.c +msgid "no reset pin available" +msgstr "" + +#: shared-module/sdcardio/SDCard.c +msgid "no response from SD card" +msgstr "" + +#: py/runtime.c +msgid "no such attribute" +msgstr "" + +#: ports/nrf/common-hal/_bleio/Connection.c +msgid "non-UUID found in service_uuids_whitelist" +msgstr "" + +#: py/compile.c +msgid "non-default argument follows default argument" +msgstr "" + +#: extmod/modubinascii.c +msgid "non-hex digit found" +msgstr "" + +#: py/compile.c +msgid "non-keyword arg after */**" +msgstr "" + +#: py/compile.c +msgid "non-keyword arg after keyword arg" +msgstr "" + +#: shared-bindings/_bleio/UUID.c +msgid "not a 128-bit UUID" +msgstr "" + +#: py/objstr.c +msgid "not all arguments converted during string formatting" +msgstr "" + +#: py/objstr.c +msgid "not enough arguments for format string" +msgstr "" + +#: extmod/ulab/code/poly/poly.c +msgid "number of arguments must be 2, or 3" +msgstr "" + +#: extmod/ulab/code/ulab_create.c +msgid "number of points must be at least 2" +msgstr "" + +#: py/obj.c +msgid "object '%q' is not a tuple or list" +msgstr "" + +#: py/obj.c +msgid "object does not support item assignment" +msgstr "" + +#: py/obj.c +msgid "object does not support item deletion" +msgstr "" + +#: py/obj.c +msgid "object has no len" +msgstr "" + +#: py/obj.c +msgid "object is not subscriptable" +msgstr "" + +#: py/runtime.c +msgid "object not an iterator" +msgstr "" + +#: py/objtype.c py/runtime.c +msgid "object not callable" +msgstr "" + +#: py/sequence.c shared-bindings/displayio/Group.c +msgid "object not in sequence" +msgstr "" + +#: py/runtime.c +msgid "object not iterable" +msgstr "" + +#: py/obj.c +msgid "object of type '%q' has no len()" +msgstr "" + +#: py/obj.c +msgid "object with buffer protocol required" +msgstr "" + +#: extmod/modubinascii.c +msgid "odd-length string" +msgstr "" + +#: py/objstr.c py/objstrunicode.c +msgid "offset out of bounds" +msgstr "" + +#: ports/nrf/common-hal/audiobusio/PDMIn.c +msgid "only bit_depth=16 is supported" +msgstr "" + +#: ports/nrf/common-hal/audiobusio/PDMIn.c +msgid "only sample_rate=16000 is supported" +msgstr "" + +#: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c +#: shared-bindings/nvm/ByteArray.c +msgid "only slices with step=1 (aka None) are supported" +msgstr "" + +#: extmod/ulab/code/compare/compare.c extmod/ulab/code/ndarray.c +#: extmod/ulab/code/vector/vectorise.c +msgid "operands could not be broadcast together" +msgstr "" + +#: extmod/ulab/code/numerical/numerical.c +msgid "operation is not implemented on ndarrays" +msgstr "" + +#: extmod/ulab/code/ndarray.c +msgid "operation is not supported for given type" +msgstr "" + +#: py/modbuiltins.c +msgid "ord expects a character" +msgstr "" + +#: py/modbuiltins.c +#, c-format +msgid "ord() expected a character, but string of length %d found" +msgstr "" + +#: shared-bindings/displayio/Bitmap.c +msgid "out of range of source" +msgstr "" + +#: shared-bindings/displayio/Bitmap.c +msgid "out of range of target" +msgstr "" + +#: py/objint_mpz.c +msgid "overflow converting long int to machine word" +msgstr "" + +#: py/modstruct.c +#, c-format +msgid "pack expected %d items for packing (got %d)" +msgstr "" + +#: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c +msgid "palette must be 32 bytes long" +msgstr "" + +#: shared-bindings/displayio/Palette.c +msgid "palette_index should be an int" +msgstr "" + +#: py/compile.c +msgid "parameter annotation must be an identifier" +msgstr "" + +#: py/emitinlinextensa.c +msgid "parameters must be registers in sequence a2 to a5" +msgstr "" + +#: py/emitinlinethumb.c +msgid "parameters must be registers in sequence r0 to r3" +msgstr "" + +#: shared-bindings/displayio/Bitmap.c +msgid "pixel coordinates out of bounds" +msgstr "" + +#: shared-bindings/displayio/Bitmap.c +msgid "pixel value requires too many bits" +msgstr "" + +#: shared-bindings/displayio/TileGrid.c shared-bindings/vectorio/VectorShape.c +msgid "pixel_shader must be displayio.Palette or displayio.ColorConverter" +msgstr "" + +#: shared-module/vectorio/Polygon.c +msgid "polygon can only be registered in one parent" +msgstr "" + +#: ports/atmel-samd/common-hal/pulseio/PulseIn.c +#: ports/cxd56/common-hal/pulseio/PulseIn.c +#: ports/nrf/common-hal/pulseio/PulseIn.c +#: ports/stm/common-hal/pulseio/PulseIn.c py/objdict.c py/objlist.c py/objset.c +#: shared-bindings/ps2io/Ps2.c +msgid "pop from empty %q" +msgstr "" + +#: py/objint_mpz.c +msgid "pow() 3rd argument cannot be 0" +msgstr "" + +#: py/objint_mpz.c +msgid "pow() with 3 arguments requires integers" +msgstr "" + +#: extmod/modutimeq.c +msgid "queue overflow" +msgstr "" + +#: py/parse.c +msgid "raw f-strings are not implemented" +msgstr "" + +#: extmod/ulab/code/fft/fft.c +msgid "real and imaginary parts must be of equal length" +msgstr "" + +#: py/builtinimport.c +msgid "relative import" +msgstr "" + +#: py/obj.c +#, c-format +msgid "requested length %d but object has length %d" +msgstr "" + +#: py/compile.c +msgid "return annotation must be an identifier" +msgstr "" + +#: py/emitnative.c +msgid "return expected '%q' but got '%q'" +msgstr "" + +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "rgb_pins[%d] duplicates another pin assignment" +msgstr "" + +#: shared-bindings/rgbmatrix/RGBMatrix.c +#, c-format +msgid "rgb_pins[%d] is not on the same port as clock" +msgstr "" + +#: extmod/ulab/code/ndarray.c +msgid "right hand side must be an ndarray, or a scalar" +msgstr "" + +#: py/objstr.c +msgid "rsplit(None,n)" +msgstr "" + +#: shared-bindings/audiocore/RawSample.c +msgid "" +"sample_source buffer must be a bytearray or array of type 'h', 'H', 'b' or " +"'B'" +msgstr "" + +#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c +msgid "sampling rate out of range" +msgstr "" + +#: py/modmicropython.c +msgid "schedule stack full" +msgstr "" + +#: lib/utils/pyexec.c py/builtinimport.c +msgid "script compilation not supported" +msgstr "" + +#: extmod/ulab/code/ndarray.c +msgid "shape must be a 2-tuple" +msgstr "" + +#: py/objstr.c +msgid "sign not allowed in string format specifier" +msgstr "" + +#: py/objstr.c +msgid "sign not allowed with integer format specifier 'c'" +msgstr "" + +#: py/objstr.c +msgid "single '}' encountered in format string" +msgstr "" + +#: extmod/ulab/code/linalg/linalg.c +msgid "size is defined for ndarrays only" +msgstr "" + +#: shared-bindings/time/__init__.c +msgid "sleep length must be non-negative" +msgstr "" + +#: extmod/ulab/code/ndarray.c +msgid "slice step can't be zero" +msgstr "" + +#: py/objslice.c py/sequence.c +msgid "slice step cannot be zero" +msgstr "" + +#: py/objint.c py/sequence.c +msgid "small int overflow" +msgstr "" + +#: main.c +msgid "soft reboot\n" +msgstr "" + +#: extmod/ulab/code/numerical/numerical.c +msgid "sort argument must be an ndarray" +msgstr "" + +#: extmod/ulab/code/filter/filter.c +msgid "sos array must be of shape (n_section, 6)" +msgstr "" + +#: extmod/ulab/code/filter/filter.c +msgid "sos[:, 3] should be all ones" +msgstr "" + +#: extmod/ulab/code/filter/filter.c +msgid "sosfilt requires iterable arguments" +msgstr "" + +#: shared-bindings/displayio/Bitmap.c +msgid "source palette too large" +msgstr "" + +#: py/objstr.c +msgid "start/end indices" +msgstr "" + +#: shared-bindings/displayio/Shape.c +msgid "start_x should be an int" +msgstr "" + +#: shared-bindings/random/__init__.c +msgid "step must be non-zero" +msgstr "" + +#: shared-bindings/busio/UART.c +msgid "stop must be 1 or 2" +msgstr "" + +#: shared-bindings/random/__init__.c +msgid "stop not reachable from start" +msgstr "" + +#: py/stream.c +msgid "stream operation not supported" +msgstr "" + +#: py/objstrunicode.c +msgid "string indices must be integers, not %q" +msgstr "" + +#: py/stream.c +msgid "string not supported; use bytes or bytearray" +msgstr "" + +#: extmod/moductypes.c +msgid "struct: cannot index" +msgstr "" + +#: extmod/moductypes.c +msgid "struct: no fields" +msgstr "" + +#: py/objarray.c py/objstr.c +msgid "substring not found" +msgstr "" + +#: py/compile.c +msgid "super() can't find self" +msgstr "" + +#: extmod/modujson.c +msgid "syntax error in JSON" +msgstr "" + +#: extmod/moductypes.c +msgid "syntax error in uctypes descriptor" +msgstr "" + +#: shared-bindings/touchio/TouchIn.c +msgid "threshold must be in the range 0-65536" +msgstr "" + +#: shared-bindings/time/__init__.c +msgid "time.struct_time() takes a 9-sequence" +msgstr "" + +#: ports/nrf/common-hal/watchdog/WatchDogTimer.c +msgid "timeout duration exceeded the maximum supported value" +msgstr "" + +#: shared-bindings/busio/UART.c +msgid "timeout must be 0.0-100.0 seconds" +msgstr "" + +#: shared-bindings/_bleio/CharacteristicBuffer.c +msgid "timeout must be >= 0.0" +msgstr "" + +#: shared-module/sdcardio/SDCard.c +msgid "timeout waiting for v1 card" +msgstr "" + +#: shared-module/sdcardio/SDCard.c +msgid "timeout waiting for v2 card" +msgstr "" + +#: shared-bindings/time/__init__.c +msgid "timestamp out of range for platform time_t" +msgstr "" + +#: shared-module/struct/__init__.c +msgid "too many arguments provided with the given format" +msgstr "" + +#: extmod/ulab/code/ndarray.c +msgid "too many indices" +msgstr "" + +#: py/runtime.c +#, c-format +msgid "too many values to unpack (expected %d)" +msgstr "" + +#: extmod/ulab/code/approx/approx.c +msgid "trapz is defined for 1D arrays of equal length" +msgstr "" + +#: extmod/ulab/code/linalg/linalg.c +msgid "tuple index out of range" +msgstr "" + +#: py/obj.c +msgid "tuple/list has wrong length" +msgstr "" + +#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c +#: shared-bindings/busio/UART.c +msgid "tx and rx cannot both be None" +msgstr "" + +#: py/objtype.c +msgid "type '%q' is not an acceptable base type" +msgstr "" + +#: py/objtype.c +msgid "type is not an acceptable base type" +msgstr "" + +#: py/runtime.c +msgid "type object '%q' has no attribute '%q'" +msgstr "" + +#: py/objtype.c +msgid "type takes 1 or 3 arguments" +msgstr "" + +#: py/objint_longlong.c +msgid "ulonglong too large" +msgstr "" + +#: py/emitnative.c +msgid "unary op %q not implemented" +msgstr "" + +#: py/parse.c +msgid "unexpected indent" +msgstr "" + +#: py/bc.c +msgid "unexpected keyword argument" +msgstr "" + +#: py/bc.c py/objnamedtuple.c +msgid "unexpected keyword argument '%q'" +msgstr "" + +#: py/lexer.c +msgid "unicode name escapes" +msgstr "" + +#: py/parse.c +msgid "unindent does not match any outer indentation level" +msgstr "" + +#: py/objstr.c +#, c-format +msgid "unknown conversion specifier %c" +msgstr "" + +#: py/objstr.c +msgid "unknown format code '%c' for object of type '%q'" +msgstr "" + +#: py/compile.c +msgid "unknown type" +msgstr "" + +#: py/emitnative.c +msgid "unknown type '%q'" +msgstr "" + +#: py/objstr.c +msgid "unmatched '{' in format" +msgstr "" + +#: py/objtype.c py/runtime.c +msgid "unreadable attribute" +msgstr "" + +#: shared-bindings/displayio/TileGrid.c shared-bindings/vectorio/VectorShape.c +#: shared-module/vectorio/Polygon.c +msgid "unsupported %q type" +msgstr "" + +#: py/emitinlinethumb.c +#, c-format +msgid "unsupported Thumb instruction '%s' with %d arguments" +msgstr "" + +#: py/emitinlinextensa.c +#, c-format +msgid "unsupported Xtensa instruction '%s' with %d arguments" +msgstr "" + +#: py/objstr.c +#, c-format +msgid "unsupported format character '%c' (0x%x) at index %d" +msgstr "" + +#: py/runtime.c +msgid "unsupported type for %q: '%q'" +msgstr "" + +#: py/runtime.c +msgid "unsupported type for operator" +msgstr "" + +#: py/runtime.c +msgid "unsupported types for %q: '%q', '%q'" +msgstr "" + +#: py/objint.c +#, c-format +msgid "value must fit in %d byte(s)" +msgstr "" + +#: shared-bindings/displayio/Bitmap.c +msgid "value_count must be > 0" +msgstr "" + +#: extmod/ulab/code/linalg/linalg.c +msgid "vectors must have same lengths" +msgstr "" + +#: shared-bindings/watchdog/WatchDogTimer.c +msgid "watchdog timeout must be greater than 0" +msgstr "" + +#: shared-bindings/_bleio/Adapter.c +msgid "window must be <= interval" +msgstr "" + +#: extmod/ulab/code/linalg/linalg.c +msgid "wrong argument type" +msgstr "" + +#: extmod/ulab/code/ndarray.c +msgid "wrong index type" +msgstr "" + +#: extmod/ulab/code/vector/vectorise.c +msgid "wrong input type" +msgstr "" + +#: extmod/ulab/code/ulab_create.c py/objstr.c +msgid "wrong number of arguments" +msgstr "" + +#: py/runtime.c +msgid "wrong number of values to unpack" +msgstr "" + +#: extmod/ulab/code/ndarray.c +msgid "wrong operand type" +msgstr "" + +#: extmod/ulab/code/vector/vectorise.c +msgid "wrong output type" +msgstr "" + +#: shared-module/displayio/Shape.c +msgid "x value out of bounds" +msgstr "" + +#: shared-bindings/displayio/Shape.c +msgid "y should be an int" +msgstr "" + +#: shared-module/displayio/Shape.c +msgid "y value out of bounds" +msgstr "" + +#: py/objrange.c +msgid "zero step" +msgstr "" + +#: extmod/ulab/code/filter/filter.c +msgid "zi must be an ndarray" +msgstr "" + +#: extmod/ulab/code/filter/filter.c +msgid "zi must be of float type" +msgstr "" + +#: extmod/ulab/code/filter/filter.c +msgid "zi must be of shape (n_section, 2)" +msgstr "" diff --git a/locale/es.po b/locale/es.po index 15b4fe780..85b4e758d 100644 --- a/locale/es.po +++ b/locale/es.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-30 14:38-0400\n" +"POT-Creation-Date: 2020-09-13 14:21-0500\n" "PO-Revision-Date: 2020-08-17 21:11+0000\n" "Last-Translator: Alvaro Figueroa <alvaro@greencore.co.cr>\n" "Language-Team: \n" @@ -36,14 +36,6 @@ msgstr "" "Reporte un problema con el contenido de su unidad CIRCUITPY en\n" "https://github.com/adafruit/circuitpython/issues\n" -#: supervisor/shared/safe_mode.c -msgid "" -"\n" -"To exit, please reset the board without " -msgstr "" -"\n" -"Para salir, favor reinicie la tarjeta sin " - #: py/obj.c msgid " File \"%q\"" msgstr " Archivo \"%q\"" @@ -282,7 +274,7 @@ msgstr "pow() con 3 argumentos no soportado" msgid "A hardware interrupt channel is already in use" msgstr "El canal EXTINT ya está siendo utilizado" -#: shared-bindings/_bleio/Address.c +#: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c #, c-format msgid "Address must be %d bytes long" msgstr "La dirección debe ser %d bytes de largo" @@ -384,6 +376,10 @@ msgstr "" "Se intentó asignación del montículo, sin que la VM de MicroPython esté " "ejecutando." +#: shared-bindings/wifi/Radio.c +msgid "Authentication failure" +msgstr "" + #: main.c msgid "Auto-reload is off.\n" msgstr "Auto-recarga deshabilitada.\n" @@ -597,6 +593,10 @@ msgstr "" "CircuitPython está en modo seguro porque presionó el botón de reinicio " "durante el arranque. Presione nuevamente para salir del modo seguro.\n" +#: supervisor/shared/safe_mode.c +msgid "CircuitPython was unable to allocate the heap.\n" +msgstr "" + #: shared-module/bitbangio/SPI.c msgid "Clock pin init failed." msgstr "Iniciado de pin de reloj fallido." @@ -1245,6 +1245,10 @@ msgstr "No hay soporte de entero largo" msgid "No more timers available on this pin." msgstr "No hay más temporizadores disponibles en este pin." +#: shared-bindings/wifi/Radio.c +msgid "No network with that ssid" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "No hay pulldown en el pin; 1Mohm recomendado" @@ -1265,6 +1269,10 @@ msgstr "No hay temporizador disponible" msgid "Nordic Soft Device failure assertion." msgstr "fallo de aserción de dispositivo Nordic Soft." +#: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c +msgid "Not a valid IP string" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #: shared-bindings/_bleio/CharacteristicBuffer.c msgid "Not connected" @@ -1315,6 +1323,10 @@ msgstr "" "Solo se admiten BMP monocromáticos, indexados de 4 bpp u 8 bpp y 16 bpp o " "más: %d bpp proporcionados" +#: shared-bindings/ipaddress/__init__.c +msgid "Only raw int supported for ip" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "El sobremuestreo debe ser un múltiplo de 8." @@ -1516,6 +1528,10 @@ msgstr "Pin RTS seleccionado no válido" msgid "Serializer in use" msgstr "Serializer está siendo utilizado" +#: shared-bindings/ssl/SSLContext.c +msgid "Server side context cannot have hostname" +msgstr "" + #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "Slice y value tienen tamaños diferentes." @@ -1629,6 +1645,10 @@ msgstr "" "El temporizador es utilizado para uso interno - declare los pines para PWM " "más temprano en el programa" +#: supervisor/shared/safe_mode.c +msgid "To exit, please reset the board without " +msgstr "Para salir, por favor reinicia la tarjeta sin " + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Too many channels in sample." msgstr "Demasiados canales en sample." @@ -1725,6 +1745,10 @@ msgstr "Imposible escribir en nvm." msgid "Unexpected nrfx uuid type" msgstr "Tipo de uuid nrfx inesperado" +#: shared-bindings/wifi/Radio.c +msgid "Unknown failure" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown gatt error: 0x%04x" @@ -1839,6 +1863,10 @@ msgstr "" "\n" "Para listar los módulos incorporados por favor haga `help(\"modules\")`.\n" +#: shared-bindings/wifi/Radio.c +msgid "WiFi password must be between 8 and 63 characters" +msgstr "" + #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Writes not supported on Characteristic" msgstr "Escrituras no admitidas en la característica" @@ -1953,7 +1981,7 @@ msgstr "especificador de conversion erroneo" msgid "bad format string" msgstr "formato de string erroneo" -#: py/binary.c +#: py/binary.c py/objarray.c msgid "bad typecode" msgstr "typecode erroneo" @@ -2006,6 +2034,10 @@ msgstr "byteorder no es una cadena" msgid "bytes > 8 bits not supported" msgstr "bytes > 8 bits no soportados" +#: py/objarray.c +msgid "bytes length not a multiple of item size" +msgstr "" + #: py/objstr.c msgid "bytes value out of range" msgstr "valor de bytes fuera de rango" @@ -2984,6 +3016,11 @@ msgstr "" msgid "overflow converting long int to machine word" msgstr "desbordamiento convirtiendo long int a palabra de máquina" +#: py/modstruct.c +#, c-format +msgid "pack expected %d items for packing (got %d)" +msgstr "" + #: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c msgid "palette must be 32 bytes long" msgstr "palette debe ser 32 bytes de largo" @@ -3460,6 +3497,13 @@ msgstr "zi debe ser de tipo flotante" msgid "zi must be of shape (n_section, 2)" msgstr "zi debe ser una forma (n_section,2)" +#~ msgid "" +#~ "\n" +#~ "To exit, please reset the board without " +#~ msgstr "" +#~ "\n" +#~ "Para salir, favor reinicie la tarjeta sin " + #~ msgid "PulseOut not supported on this chip" #~ msgstr "PulseOut no es compatible con este chip" @@ -3909,9 +3953,6 @@ msgstr "zi debe ser una forma (n_section,2)" #~ msgid "Tile indices must be 0 - 255" #~ msgstr "Los índices de Tile deben ser 0 - 255" -#~ msgid "To exit, please reset the board without " -#~ msgstr "Para salir, por favor reinicia la tarjeta sin " - #~ msgid "UART(%d) does not exist" #~ msgstr "UART(%d) no existe" diff --git a/locale/fil.po b/locale/fil.po index 5bb696c83..e630fddee 100644 --- a/locale/fil.po +++ b/locale/fil.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-30 14:38-0400\n" +"POT-Creation-Date: 2020-09-13 14:21-0500\n" "PO-Revision-Date: 2018-12-20 22:15-0800\n" "Last-Translator: Timothy <me@timothygarcia.ca>\n" "Language-Team: fil\n" @@ -28,12 +28,6 @@ msgid "" "https://github.com/adafruit/circuitpython/issues\n" msgstr "" -#: supervisor/shared/safe_mode.c -msgid "" -"\n" -"To exit, please reset the board without " -msgstr "" - #: py/obj.c msgid " File \"%q\"" msgstr " File \"%q\"" @@ -274,7 +268,7 @@ msgstr "3-arg pow() hindi suportado" msgid "A hardware interrupt channel is already in use" msgstr "Isang channel ng hardware interrupt ay ginagamit na" -#: shared-bindings/_bleio/Address.c +#: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c #, fuzzy, c-format msgid "Address must be %d bytes long" msgstr "ang palette ay dapat 32 bytes ang haba" @@ -373,6 +367,10 @@ msgstr "" msgid "Attempted heap allocation when MicroPython VM not running." msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "Authentication failure" +msgstr "" + #: main.c msgid "Auto-reload is off.\n" msgstr "Awtomatikong pag re-reload ay OFF.\n" @@ -584,6 +582,10 @@ msgid "" "boot. Press again to exit safe mode.\n" msgstr "" +#: supervisor/shared/safe_mode.c +msgid "CircuitPython was unable to allocate the heap.\n" +msgstr "" + #: shared-module/bitbangio/SPI.c msgid "Clock pin init failed." msgstr "Nabigo sa pag init ng Clock pin." @@ -1235,6 +1237,10 @@ msgstr "" msgid "No more timers available on this pin." msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "No network with that ssid" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1255,6 +1261,10 @@ msgstr "" msgid "Nordic Soft Device failure assertion." msgstr "" +#: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c +msgid "Not a valid IP string" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #: shared-bindings/_bleio/CharacteristicBuffer.c #, fuzzy @@ -1302,6 +1312,10 @@ msgid "" "%d bpp given" msgstr "" +#: shared-bindings/ipaddress/__init__.c +msgid "Only raw int supported for ip" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "Oversample ay dapat multiple ng 8." @@ -1502,6 +1516,10 @@ msgstr "" msgid "Serializer in use" msgstr "Serializer ginagamit" +#: shared-bindings/ssl/SSLContext.c +msgid "Server side context cannot have hostname" +msgstr "" + #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "Slice at value iba't ibang haba." @@ -1602,6 +1620,10 @@ msgid "" "Timer was reserved for internal use - declare PWM pins earlier in the program" msgstr "" +#: supervisor/shared/safe_mode.c +msgid "To exit, please reset the board without " +msgstr "Para lumabas, paki-reset ang board na wala ang " + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Too many channels in sample." msgstr "Sobra ang channels sa sample." @@ -1698,6 +1720,10 @@ msgstr "Hindi ma i-sulat sa NVM." msgid "Unexpected nrfx uuid type" msgstr "hindi inaasahang indent" +#: shared-bindings/wifi/Radio.c +msgid "Unknown failure" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown gatt error: 0x%04x" @@ -1810,6 +1836,10 @@ msgstr "" "\n" "Para makita ang listahan ng modules, `help(“modules”)`.\n" +#: shared-bindings/wifi/Radio.c +msgid "WiFi password must be between 8 and 63 characters" +msgstr "" + #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Writes not supported on Characteristic" msgstr "" @@ -1924,7 +1954,7 @@ msgstr "masamang pag convert na specifier" msgid "bad format string" msgstr "maling format ang string" -#: py/binary.c +#: py/binary.c py/objarray.c msgid "bad typecode" msgstr "masamang typecode" @@ -1978,6 +2008,10 @@ msgstr "" msgid "bytes > 8 bits not supported" msgstr "hindi sinusuportahan ang bytes > 8 bits" +#: py/objarray.c +msgid "bytes length not a multiple of item size" +msgstr "" + #: py/objstr.c msgid "bytes value out of range" msgstr "bytes value wala sa sakop" @@ -2960,6 +2994,11 @@ msgstr "" msgid "overflow converting long int to machine word" msgstr "overflow nagcoconvert ng long int sa machine word" +#: py/modstruct.c +#, c-format +msgid "pack expected %d items for packing (got %d)" +msgstr "" + #: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c msgid "palette must be 32 bytes long" msgstr "ang palette ay dapat 32 bytes ang haba" @@ -3810,9 +3849,6 @@ msgstr "" #~ "Ang reset button ay pinindot habang nag boot ang CircuitPython. Pindutin " #~ "ulit para lumabas sa safe mode.\n" -#~ msgid "To exit, please reset the board without " -#~ msgstr "Para lumabas, paki-reset ang board na wala ang " - #~ msgid "UART(%d) does not exist" #~ msgstr "Walang UART(%d)" diff --git a/locale/fr.po b/locale/fr.po index 3ab485802..118064896 100644 --- a/locale/fr.po +++ b/locale/fr.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: 0.1\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-30 14:38-0400\n" +"POT-Creation-Date: 2020-09-13 14:21-0500\n" "PO-Revision-Date: 2020-07-27 21:27+0000\n" "Last-Translator: Nathan <bonnemainsnathan@gmail.com>\n" "Language: fr\n" @@ -36,14 +36,6 @@ msgstr "" "l'adresse\n" "https://github.com/adafruit/circuitpython/issues\n" -#: supervisor/shared/safe_mode.c -msgid "" -"\n" -"To exit, please reset the board without " -msgstr "" -"\n" -"Pour quitter, veuillez réinitialiser la carte sans " - #: py/obj.c msgid " File \"%q\"" msgstr " Fichier \"%q\"" @@ -283,7 +275,7 @@ msgstr "pow() non supporté avec 3 arguments" msgid "A hardware interrupt channel is already in use" msgstr "Un canal d'interruptions matérielles est déjà utilisé" -#: shared-bindings/_bleio/Address.c +#: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c #, c-format msgid "Address must be %d bytes long" msgstr "L'adresse doit être longue de %d octets" @@ -384,6 +376,10 @@ msgstr "" "Tentative d'allocation de segments lorsque la machine virtuelle MicroPython " "n'est pas en cours d'exécution." +#: shared-bindings/wifi/Radio.c +msgid "Authentication failure" +msgstr "" + #: main.c msgid "Auto-reload is off.\n" msgstr "L'auto-chargement est désactivé.\n" @@ -600,6 +596,10 @@ msgstr "" "réinitialisation pendant le démarrage. Appuyez à nouveau pour quitter le " "mode sans échec.\n" +#: supervisor/shared/safe_mode.c +msgid "CircuitPython was unable to allocate the heap.\n" +msgstr "" + #: shared-module/bitbangio/SPI.c msgid "Clock pin init failed." msgstr "Echec de l'init. de la broche d'horloge." @@ -1249,6 +1249,10 @@ msgstr "Pas de support entier long" msgid "No more timers available on this pin." msgstr "Plus de minuteurs disponibles sur cette broche." +#: shared-bindings/wifi/Radio.c +msgid "No network with that ssid" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Pas de pulldown sur la broche ; 1Mohm recommandé" @@ -1269,6 +1273,10 @@ msgstr "Pas de minuterie disponible" msgid "Nordic Soft Device failure assertion." msgstr "Affirmation de défaillance du Nordic Soft Device." +#: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c +msgid "Not a valid IP string" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #: shared-bindings/_bleio/CharacteristicBuffer.c msgid "Not connected" @@ -1319,6 +1327,10 @@ msgstr "" "Prise en charge uniquement des monochromes, 4 bpp ou 8 bpp indexés et 16 bpp " "ou plus : %d bpp fournis" +#: shared-bindings/ipaddress/__init__.c +msgid "Only raw int supported for ip" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "Le sur-échantillonage doit être un multiple de 8." @@ -1522,6 +1534,10 @@ msgstr "Broche RTS sélectionnée non valide" msgid "Serializer in use" msgstr "Sérialiseur en cours d'utilisation" +#: shared-bindings/ssl/SSLContext.c +msgid "Server side context cannot have hostname" +msgstr "" + #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "Tranche et valeur de tailles différentes." @@ -1631,6 +1647,10 @@ msgid "" "Timer was reserved for internal use - declare PWM pins earlier in the program" msgstr "" +#: supervisor/shared/safe_mode.c +msgid "To exit, please reset the board without " +msgstr "Pour quitter, redémarrez la carte SVP sans " + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Too many channels in sample." msgstr "Trop de canaux dans l'échantillon." @@ -1730,6 +1750,10 @@ msgstr "Impossible d'écrire sur la mémoire non-volatile." msgid "Unexpected nrfx uuid type" msgstr "Type inattendu pour l'uuid nrfx" +#: shared-bindings/wifi/Radio.c +msgid "Unknown failure" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown gatt error: 0x%04x" @@ -1846,6 +1870,10 @@ msgstr "" "\n" "Pour lister les modules inclus, tapez `help(\"modules\")`.\n" +#: shared-bindings/wifi/Radio.c +msgid "WiFi password must be between 8 and 63 characters" +msgstr "" + #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Writes not supported on Characteristic" msgstr "Écritures non prises en charge sur la caractéristique" @@ -1960,7 +1988,7 @@ msgstr "mauvaise spécification de conversion" msgid "bad format string" msgstr "chaîne mal-formée" -#: py/binary.c +#: py/binary.c py/objarray.c msgid "bad typecode" msgstr "mauvais code type" @@ -2013,6 +2041,10 @@ msgstr "byteorder n'est pas une chaîne" msgid "bytes > 8 bits not supported" msgstr "octets > 8 bits non supporté" +#: py/objarray.c +msgid "bytes length not a multiple of item size" +msgstr "" + #: py/objstr.c msgid "bytes value out of range" msgstr "valeur des octets hors bornes" @@ -3004,6 +3036,11 @@ msgstr "" msgid "overflow converting long int to machine word" msgstr "dépassement de capacité en convertissant un entier long en mot machine" +#: py/modstruct.c +#, c-format +msgid "pack expected %d items for packing (got %d)" +msgstr "" + #: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c msgid "palette must be 32 bytes long" msgstr "la palette doit être longue de 32 octets" @@ -3481,6 +3518,13 @@ msgstr "" msgid "zi must be of shape (n_section, 2)" msgstr "" +#~ msgid "" +#~ "\n" +#~ "To exit, please reset the board without " +#~ msgstr "" +#~ "\n" +#~ "Pour quitter, veuillez réinitialiser la carte sans " + #~ msgid "PulseOut not supported on this chip" #~ msgstr "PulseOut non pris en charge sur cette puce" @@ -3938,9 +3982,6 @@ msgstr "" #~ msgid "Tile indices must be 0 - 255" #~ msgstr "Les indices des tuiles doivent être compris entre 0 et 255 " -#~ msgid "To exit, please reset the board without " -#~ msgstr "Pour quitter, redémarrez la carte SVP sans " - #~ msgid "UART(%d) does not exist" #~ msgstr "UART(%d) n'existe pas" diff --git a/locale/hi.po b/locale/hi.po index 3803348aa..c06eff81d 100644 --- a/locale/hi.po +++ b/locale/hi.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-30 14:38-0400\n" +"POT-Creation-Date: 2020-09-13 14:21-0500\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: Automatically generated\n" "Language-Team: none\n" @@ -29,12 +29,6 @@ msgid "" "https://github.com/adafruit/circuitpython/issues\n" msgstr "" -#: supervisor/shared/safe_mode.c -msgid "" -"\n" -"To exit, please reset the board without " -msgstr "" - #: py/obj.c msgid " File \"%q\"" msgstr "" @@ -272,7 +266,7 @@ msgstr "" msgid "A hardware interrupt channel is already in use" msgstr "" -#: shared-bindings/_bleio/Address.c +#: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c #, c-format msgid "Address must be %d bytes long" msgstr "" @@ -370,6 +364,10 @@ msgstr "" msgid "Attempted heap allocation when MicroPython VM not running." msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "Authentication failure" +msgstr "" + #: main.c msgid "Auto-reload is off.\n" msgstr "" @@ -577,6 +575,10 @@ msgid "" "boot. Press again to exit safe mode.\n" msgstr "" +#: supervisor/shared/safe_mode.c +msgid "CircuitPython was unable to allocate the heap.\n" +msgstr "" + #: shared-module/bitbangio/SPI.c msgid "Clock pin init failed." msgstr "" @@ -1220,6 +1222,10 @@ msgstr "" msgid "No more timers available on this pin." msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "No network with that ssid" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1240,6 +1246,10 @@ msgstr "" msgid "Nordic Soft Device failure assertion." msgstr "" +#: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c +msgid "Not a valid IP string" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #: shared-bindings/_bleio/CharacteristicBuffer.c msgid "Not connected" @@ -1284,6 +1294,10 @@ msgid "" "%d bpp given" msgstr "" +#: shared-bindings/ipaddress/__init__.c +msgid "Only raw int supported for ip" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "" @@ -1480,6 +1494,10 @@ msgstr "" msgid "Serializer in use" msgstr "" +#: shared-bindings/ssl/SSLContext.c +msgid "Server side context cannot have hostname" +msgstr "" + #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "" @@ -1580,6 +1598,10 @@ msgid "" "Timer was reserved for internal use - declare PWM pins earlier in the program" msgstr "" +#: supervisor/shared/safe_mode.c +msgid "To exit, please reset the board without " +msgstr "" + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Too many channels in sample." msgstr "" @@ -1675,6 +1697,10 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "Unknown failure" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown gatt error: 0x%04x" @@ -1778,6 +1804,10 @@ msgid "" "To list built-in modules please do `help(\"modules\")`.\n" msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "WiFi password must be between 8 and 63 characters" +msgstr "" + #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Writes not supported on Characteristic" msgstr "" @@ -1892,7 +1922,7 @@ msgstr "" msgid "bad format string" msgstr "" -#: py/binary.c +#: py/binary.c py/objarray.c msgid "bad typecode" msgstr "" @@ -1945,6 +1975,10 @@ msgstr "" msgid "bytes > 8 bits not supported" msgstr "" +#: py/objarray.c +msgid "bytes length not a multiple of item size" +msgstr "" + #: py/objstr.c msgid "bytes value out of range" msgstr "" @@ -2910,6 +2944,11 @@ msgstr "" msgid "overflow converting long int to machine word" msgstr "" +#: py/modstruct.c +#, c-format +msgid "pack expected %d items for packing (got %d)" +msgstr "" + #: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c msgid "palette must be 32 bytes long" msgstr "" diff --git a/locale/it_IT.po b/locale/it_IT.po index e9dfc0474..5ff22f8a6 100644 --- a/locale/it_IT.po +++ b/locale/it_IT.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-30 14:38-0400\n" +"POT-Creation-Date: 2020-09-13 14:21-0500\n" "PO-Revision-Date: 2018-10-02 16:27+0200\n" "Last-Translator: Enrico Paganin <enrico.paganin@mail.com>\n" "Language-Team: \n" @@ -28,12 +28,6 @@ msgid "" "https://github.com/adafruit/circuitpython/issues\n" msgstr "" -#: supervisor/shared/safe_mode.c -msgid "" -"\n" -"To exit, please reset the board without " -msgstr "" - #: py/obj.c msgid " File \"%q\"" msgstr " File \"%q\"" @@ -273,7 +267,7 @@ msgstr "pow() con tre argmomenti non supportata" msgid "A hardware interrupt channel is already in use" msgstr "Un canale di interrupt hardware è già in uso" -#: shared-bindings/_bleio/Address.c +#: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c #, fuzzy, c-format msgid "Address must be %d bytes long" msgstr "la palette deve essere lunga 32 byte" @@ -372,6 +366,10 @@ msgstr "" msgid "Attempted heap allocation when MicroPython VM not running." msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "Authentication failure" +msgstr "" + #: main.c msgid "Auto-reload is off.\n" msgstr "Auto-reload disattivato.\n" @@ -585,6 +583,10 @@ msgid "" "boot. Press again to exit safe mode.\n" msgstr "" +#: supervisor/shared/safe_mode.c +msgid "CircuitPython was unable to allocate the heap.\n" +msgstr "" + #: shared-module/bitbangio/SPI.c msgid "Clock pin init failed." msgstr "Inizializzazione del pin di clock fallita." @@ -1239,6 +1241,10 @@ msgstr "" msgid "No more timers available on this pin." msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "No network with that ssid" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1259,6 +1265,10 @@ msgstr "" msgid "Nordic Soft Device failure assertion." msgstr "" +#: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c +msgid "Not a valid IP string" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #: shared-bindings/_bleio/CharacteristicBuffer.c #, fuzzy @@ -1307,6 +1317,10 @@ msgid "" "%d bpp given" msgstr "" +#: shared-bindings/ipaddress/__init__.c +msgid "Only raw int supported for ip" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "L'oversampling deve essere multiplo di 8." @@ -1513,6 +1527,10 @@ msgstr "" msgid "Serializer in use" msgstr "Serializer in uso" +#: shared-bindings/ssl/SSLContext.c +msgid "Server side context cannot have hostname" +msgstr "" + #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "" @@ -1613,6 +1631,10 @@ msgid "" "Timer was reserved for internal use - declare PWM pins earlier in the program" msgstr "" +#: supervisor/shared/safe_mode.c +msgid "To exit, please reset the board without " +msgstr "Per uscire resettare la scheda senza " + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Too many channels in sample." msgstr "" @@ -1709,6 +1731,10 @@ msgstr "Imposibile scrivere su nvm." msgid "Unexpected nrfx uuid type" msgstr "indentazione inaspettata" +#: shared-bindings/wifi/Radio.c +msgid "Unknown failure" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown gatt error: 0x%04x" @@ -1813,6 +1839,10 @@ msgid "" "To list built-in modules please do `help(\"modules\")`.\n" msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "WiFi password must be between 8 and 63 characters" +msgstr "" + #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Writes not supported on Characteristic" msgstr "" @@ -1927,7 +1957,7 @@ msgstr "specificatore di conversione scorretto" msgid "bad format string" msgstr "stringa di formattazione scorretta" -#: py/binary.c +#: py/binary.c py/objarray.c msgid "bad typecode" msgstr "" @@ -1983,6 +2013,10 @@ msgstr "" msgid "bytes > 8 bits not supported" msgstr "byte > 8 bit non supportati" +#: py/objarray.c +msgid "bytes length not a multiple of item size" +msgstr "" + #: py/objstr.c msgid "bytes value out of range" msgstr "valore byte fuori intervallo" @@ -2966,6 +3000,11 @@ msgstr "" msgid "overflow converting long int to machine word" msgstr "overflow convertendo long int in parola" +#: py/modstruct.c +#, c-format +msgid "pack expected %d items for packing (got %d)" +msgstr "" + #: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c msgid "palette must be 32 bytes long" msgstr "la palette deve essere lunga 32 byte" @@ -3801,9 +3840,6 @@ msgstr "" #~ "La potenza del microcontrollore è calata. Assicurati che l'alimentazione " #~ "sia attaccata correttamente\n" -#~ msgid "To exit, please reset the board without " -#~ msgstr "Per uscire resettare la scheda senza " - #~ msgid "UART(%d) does not exist" #~ msgstr "UART(%d) non esistente" diff --git a/locale/ja.po b/locale/ja.po index b9fb7ce7a..db3839b40 100644 --- a/locale/ja.po +++ b/locale/ja.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-27 11:21-0400\n" +"POT-Creation-Date: 2020-09-13 14:21-0500\n" "PO-Revision-Date: 2020-09-01 18:44+0000\n" "Last-Translator: Jeff Epler <jepler@gmail.com>\n" "Language-Team: none\n" @@ -36,14 +36,6 @@ msgstr "" "CIRCUITPYドライブの内容を添えて問題を以下で報告してください：\n" "https://github.com/adafruit/circuitpython/issues\n" -#: supervisor/shared/safe_mode.c -msgid "" -"\n" -"To exit, please reset the board without " -msgstr "" -"\n" -"終了するには、次の操作をせずにリセットしてください: " - #: py/obj.c msgid " File \"%q\"" msgstr " ファイル \"%q\"" @@ -282,7 +274,7 @@ msgstr "引数3つのpow()はサポートされていません" msgid "A hardware interrupt channel is already in use" msgstr "ハードウェア割り込みチャネルは使用中" -#: shared-bindings/_bleio/Address.c +#: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c #, c-format msgid "Address must be %d bytes long" msgstr "アドレスは、%dバイト長でなければなりません" @@ -380,6 +372,10 @@ msgstr "%d個のブロックの確保を試みました" msgid "Attempted heap allocation when MicroPython VM not running." msgstr "MicroPython VM 非実行時にヒープの確保を試みました" +#: shared-bindings/wifi/Radio.c +msgid "Authentication failure" +msgstr "" + #: main.c msgid "Auto-reload is off.\n" msgstr "オートリロードはオフです。\n" @@ -503,6 +499,10 @@ msgstr "" msgid "Can't set CCCD on local Characteristic" msgstr "ローカルのCharacteristicにはCCCDを設定できません" +#: shared-bindings/_bleio/Adapter.c +msgid "Cannot create a new Adapter; use _bleio.adapter;" +msgstr "" + #: shared-bindings/displayio/Bitmap.c #: shared-bindings/memorymonitor/AllocationSize.c #: shared-bindings/pulseio/PulseIn.c @@ -589,6 +589,10 @@ msgstr "" "起動中にリセットボタンを押したためCircuitPythonはセーフモードにいます。もう一" "度押すとセーフモードを終了します。\n" +#: supervisor/shared/safe_mode.c +msgid "CircuitPython was unable to allocate the heap.\n" +msgstr "" + #: shared-module/bitbangio/SPI.c msgid "Clock pin init failed." msgstr "クロックピンの初期化に失敗" @@ -757,8 +761,8 @@ msgstr "EXTINTチャネルはすでに使用されています" msgid "Error in regex" msgstr "正規表現にエラーがあります" -#: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c -#: shared-bindings/microcontroller/Pin.c +#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c +#: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" @@ -769,10 +773,18 @@ msgstr "%qが必要" msgid "Expected a Characteristic" msgstr "" +#: shared-bindings/_bleio/Adapter.c +msgid "Expected a DigitalInOut" +msgstr "" + #: shared-bindings/_bleio/Characteristic.c msgid "Expected a Service" msgstr "" +#: shared-bindings/_bleio/Adapter.c +msgid "Expected a UART" +msgstr "" + #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c #: shared-bindings/_bleio/Service.c msgid "Expected a UUID" @@ -900,7 +912,9 @@ msgstr "IVは%dバイト長でなければなりません" msgid "" "Incompatible .mpy file. Please update all .mpy files. See http://adafru.it/" "mpy-update for more info." -msgstr "非互換の.mpyファイルです。全ての.mpyファイルを更新してください。詳細は http://adafru.it/mpy-update を参照" +msgstr "" +"非互換の.mpyファイルです。全ての.mpyファイルを更新してください。詳細は " +"http://adafru.it/mpy-update を参照" #: shared-bindings/_pew/PewPew.c msgid "Incorrect buffer size" @@ -1224,6 +1238,10 @@ msgstr "long integerサポートがありません" msgid "No more timers available on this pin." msgstr "このピンに利用可能なタイマーがもうありません" +#: shared-bindings/wifi/Radio.c +msgid "No network with that ssid" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "ピンにプルダウンがありません。1Mオーム推奨" @@ -1244,6 +1262,10 @@ msgstr "利用できるタイマーなし" msgid "Nordic Soft Device failure assertion." msgstr "" +#: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c +msgid "Not a valid IP string" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #: shared-bindings/_bleio/CharacteristicBuffer.c msgid "Not connected" @@ -1258,6 +1280,10 @@ msgstr "再生していません" msgid "Not running saved code.\n" msgstr "保存されたコードは実行していません。\n" +#: shared-bindings/_bleio/__init__.c +msgid "Not settable" +msgstr "" + #: shared-bindings/util.c msgid "" "Object has been deinitialized and can no longer be used. Create a new object." @@ -1286,6 +1312,10 @@ msgid "" "%d bpp given" msgstr "" +#: shared-bindings/ipaddress/__init__.c +msgid "Only raw int supported for ip" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "オーバーサンプルは8の倍数が必要" @@ -1293,7 +1323,8 @@ msgstr "オーバーサンプルは8の倍数が必要" #: shared-bindings/pwmio/PWMOut.c msgid "" "PWM duty_cycle must be between 0 and 65535 inclusive (16 bit resolution)" -msgstr "PWMのduty_cycle値は0から65535の間でなければなりません（16ビット解像度）" +msgstr "" +"PWMのduty_cycle値は0から65535の間でなければなりません（16ビット解像度）" #: shared-bindings/pwmio/PWMOut.c msgid "" @@ -1367,10 +1398,6 @@ msgstr "いずれかのキーを押すとREPLに入ります。リロードはCT msgid "Pull not used when direction is output." msgstr "方向がoutputのときpullは使われません" -#: ports/stm/ref/pulseout-pre-timeralloc.c -msgid "PulseOut not supported on this chip" -msgstr "PulseOutはこのチップでサポートされていません" - #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "RNG解体エラー" @@ -1487,6 +1514,10 @@ msgstr "選択されたRTSピンが正しくありません" msgid "Serializer in use" msgstr "シリアライザは使用中" +#: shared-bindings/ssl/SSLContext.c +msgid "Server side context cannot have hostname" +msgstr "" + #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "スライスと値の長さが一致しません" @@ -1595,6 +1626,10 @@ msgid "" "Timer was reserved for internal use - declare PWM pins earlier in the program" msgstr "" +#: supervisor/shared/safe_mode.c +msgid "To exit, please reset the board without " +msgstr "" + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Too many channels in sample." msgstr "サンプルのチャンネル数が多すぎます" @@ -1692,6 +1727,10 @@ msgstr "nvm に書き込みできません" msgid "Unexpected nrfx uuid type" msgstr "想定されていないnrfx UUID型" +#: shared-bindings/wifi/Radio.c +msgid "Unknown failure" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown gatt error: 0x%04x" @@ -1795,6 +1834,10 @@ msgid "" "To list built-in modules please do `help(\"modules\")`.\n" msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "WiFi password must be between 8 and 63 characters" +msgstr "" + #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Writes not supported on Characteristic" msgstr "" @@ -1909,7 +1952,7 @@ msgstr "" msgid "bad format string" msgstr "不正な書式化文字列" -#: py/binary.c +#: py/binary.c py/objarray.c msgid "bad typecode" msgstr "不正なtypecode" @@ -1962,6 +2005,10 @@ msgstr "byteorderが文字列ではありません" msgid "bytes > 8 bits not supported" msgstr "" +#: py/objarray.c +msgid "bytes length not a multiple of item size" +msgstr "" + #: py/objstr.c msgid "bytes value out of range" msgstr "範囲外のバイト値" @@ -2483,6 +2530,10 @@ msgstr "" msgid "initial values must be iterable" msgstr "" +#: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c +msgid "initial_value length is wrong" +msgstr "" + #: py/compile.c msgid "inline assembler must be a function" msgstr "インラインアセンブラは関数でなければなりません" @@ -2675,6 +2726,10 @@ msgstr "正定値行列ではありません" msgid "max_length must be 0-%d when fixed_length is %s" msgstr "" +#: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c +msgid "max_length must be > 0" +msgstr "" + #: py/runtime.c msgid "maximum recursion depth exceeded" msgstr "最大の再帰深度を超えました" @@ -2921,6 +2976,11 @@ msgstr "" msgid "overflow converting long int to machine word" msgstr "long intをマシンのwordに変換する際にオーバーフローしました" +#: py/modstruct.c +#, c-format +msgid "pack expected %d items for packing (got %d)" +msgstr "" + #: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c msgid "palette must be 32 bytes long" msgstr "パレットの長さは32バイトでなければなりません" @@ -3024,7 +3084,8 @@ msgstr "rsplit(None,n)" msgid "" "sample_source buffer must be a bytearray or array of type 'h', 'H', 'b' or " "'B'" -msgstr "sample_source バッファには bytearray または 'h','H','b','B'型のarrayが必要" +msgstr "" +"sample_source バッファには bytearray または 'h','H','b','B'型のarrayが必要" #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "sampling rate out of range" @@ -3394,6 +3455,16 @@ msgstr "ziはfloat値が必要" msgid "zi must be of shape (n_section, 2)" msgstr "" +#~ msgid "" +#~ "\n" +#~ "To exit, please reset the board without " +#~ msgstr "" +#~ "\n" +#~ "終了するには、次の操作をせずにリセットしてください: " + +#~ msgid "PulseOut not supported on this chip" +#~ msgstr "PulseOutはこのチップでサポートされていません" + #~ msgid "Invalid I2C pin selection" #~ msgstr "I2Cピンの選択が不正です" diff --git a/locale/ko.po b/locale/ko.po index a4e088bc4..70b798586 100644 --- a/locale/ko.po +++ b/locale/ko.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-30 14:38-0400\n" +"POT-Creation-Date: 2020-09-13 14:21-0500\n" "PO-Revision-Date: 2019-05-06 14:22-0700\n" "Last-Translator: \n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -30,12 +30,6 @@ msgid "" "https://github.com/adafruit/circuitpython/issues\n" msgstr "" -#: supervisor/shared/safe_mode.c -msgid "" -"\n" -"To exit, please reset the board without " -msgstr "" - #: py/obj.c msgid " File \"%q\"" msgstr " 파일 \"%q\"" @@ -273,7 +267,7 @@ msgstr "" msgid "A hardware interrupt channel is already in use" msgstr "" -#: shared-bindings/_bleio/Address.c +#: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c #, c-format msgid "Address must be %d bytes long" msgstr "" @@ -371,6 +365,10 @@ msgstr "" msgid "Attempted heap allocation when MicroPython VM not running." msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "Authentication failure" +msgstr "" + #: main.c msgid "Auto-reload is off.\n" msgstr "자동 재 장전이 꺼져 있습니다\n" @@ -580,6 +578,10 @@ msgid "" "boot. Press again to exit safe mode.\n" msgstr "" +#: supervisor/shared/safe_mode.c +msgid "CircuitPython was unable to allocate the heap.\n" +msgstr "" + #: shared-module/bitbangio/SPI.c msgid "Clock pin init failed." msgstr "" @@ -1223,6 +1225,10 @@ msgstr "" msgid "No more timers available on this pin." msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "No network with that ssid" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1243,6 +1249,10 @@ msgstr "" msgid "Nordic Soft Device failure assertion." msgstr "" +#: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c +msgid "Not a valid IP string" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #: shared-bindings/_bleio/CharacteristicBuffer.c msgid "Not connected" @@ -1287,6 +1297,10 @@ msgid "" "%d bpp given" msgstr "" +#: shared-bindings/ipaddress/__init__.c +msgid "Only raw int supported for ip" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "" @@ -1483,6 +1497,10 @@ msgstr "" msgid "Serializer in use" msgstr "" +#: shared-bindings/ssl/SSLContext.c +msgid "Server side context cannot have hostname" +msgstr "" + #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "" @@ -1583,6 +1601,10 @@ msgid "" "Timer was reserved for internal use - declare PWM pins earlier in the program" msgstr "" +#: supervisor/shared/safe_mode.c +msgid "To exit, please reset the board without " +msgstr "" + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Too many channels in sample." msgstr "" @@ -1679,6 +1701,10 @@ msgstr "" msgid "Unexpected nrfx uuid type" msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "Unknown failure" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown gatt error: 0x%04x" @@ -1782,6 +1808,10 @@ msgid "" "To list built-in modules please do `help(\"modules\")`.\n" msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "WiFi password must be between 8 and 63 characters" +msgstr "" + #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Writes not supported on Characteristic" msgstr "" @@ -1896,7 +1926,7 @@ msgstr "" msgid "bad format string" msgstr "" -#: py/binary.c +#: py/binary.c py/objarray.c msgid "bad typecode" msgstr "" @@ -1949,6 +1979,10 @@ msgstr "" msgid "bytes > 8 bits not supported" msgstr "" +#: py/objarray.c +msgid "bytes length not a multiple of item size" +msgstr "" + #: py/objstr.c msgid "bytes value out of range" msgstr "" @@ -2914,6 +2948,11 @@ msgstr "" msgid "overflow converting long int to machine word" msgstr "" +#: py/modstruct.c +#, c-format +msgid "pack expected %d items for packing (got %d)" +msgstr "" + #: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c msgid "palette must be 32 bytes long" msgstr "" diff --git a/locale/nl.po b/locale/nl.po index ead58bb78..04d0ede83 100644 --- a/locale/nl.po +++ b/locale/nl.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-30 14:38-0400\n" +"POT-Creation-Date: 2020-09-13 14:21-0500\n" "PO-Revision-Date: 2020-09-09 16:05+0000\n" "Last-Translator: Jelle Jager <jell@jjc.id.au>\n" "Language-Team: none\n" @@ -34,14 +34,6 @@ msgstr "" "Meld een probleem met de inhoud van de CIRCUITPY drive op:\n" "https://github.com/adafruit/circuitpython/issues\n" -#: supervisor/shared/safe_mode.c -msgid "" -"\n" -"To exit, please reset the board without " -msgstr "" -"\n" -"Om te verlaten, herstart de module zonder " - #: py/obj.c msgid " File \"%q\"" msgstr " Bestand" @@ -279,7 +271,7 @@ msgstr "3-arg pow() niet ondersteund" msgid "A hardware interrupt channel is already in use" msgstr "Een hardware interrupt kanaal is al in gebruik" -#: shared-bindings/_bleio/Address.c +#: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c #, c-format msgid "Address must be %d bytes long" msgstr "Adres moet %d bytes lang zijn" @@ -377,6 +369,10 @@ msgstr "Poging om %d blokken toe te wijzen" msgid "Attempted heap allocation when MicroPython VM not running." msgstr "heap allocatie geprobeerd terwijl MicroPython VM niet draait." +#: shared-bindings/wifi/Radio.c +msgid "Authentication failure" +msgstr "" + #: main.c msgid "Auto-reload is off.\n" msgstr "Auto-herlaad staat uit.\n" @@ -590,6 +586,10 @@ msgstr "" "CircuitPython is in veilige modus omdat de rest knop werd ingedrukt tijdens " "het opstarten. Druk nogmaals om veilige modus te verlaten\n" +#: supervisor/shared/safe_mode.c +msgid "CircuitPython was unable to allocate the heap.\n" +msgstr "" + #: shared-module/bitbangio/SPI.c msgid "Clock pin init failed." msgstr "Clock pin init mislukt." @@ -1239,6 +1239,10 @@ msgstr "Geen lange integer ondersteuning" msgid "No more timers available on this pin." msgstr "Geen timers meer beschikbaar op deze pin." +#: shared-bindings/wifi/Radio.c +msgid "No network with that ssid" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Geen pulldown op pin; 1MOhm aangeraden" @@ -1259,6 +1263,10 @@ msgstr "Geen timer beschikbaar" msgid "Nordic Soft Device failure assertion." msgstr "Nordic Soft Device assertion mislukt." +#: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c +msgid "Not a valid IP string" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #: shared-bindings/_bleio/CharacteristicBuffer.c msgid "Not connected" @@ -1309,6 +1317,10 @@ msgstr "" "Alleen monochrome en 4bpp of 8bpp, en 16bpp of grotere geïndiceerde BMP's " "zijn ondersteund: %d bpp is gegeven" +#: shared-bindings/ipaddress/__init__.c +msgid "Only raw int supported for ip" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "Oversample moet een meervoud van 8 zijn." @@ -1513,6 +1525,10 @@ msgstr "Geselecteerde RTS pin niet geldig" msgid "Serializer in use" msgstr "Serializer in gebruik" +#: shared-bindings/ssl/SSLContext.c +msgid "Server side context cannot have hostname" +msgstr "" + #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "Slice en waarde hebben verschillende lengtes." @@ -1623,6 +1639,10 @@ msgstr "" "Timer is gereserveerd voor intern gebruik - wijs PWM pins eerder in het " "programma toe" +#: supervisor/shared/safe_mode.c +msgid "To exit, please reset the board without " +msgstr "" + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Too many channels in sample." msgstr "Teveel kanalen in sample." @@ -1718,6 +1738,10 @@ msgstr "Niet in staat om naar nvm te schrijven." msgid "Unexpected nrfx uuid type" msgstr "Onverwacht mrfx uuid type" +#: shared-bindings/wifi/Radio.c +msgid "Unknown failure" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown gatt error: 0x%04x" @@ -1832,6 +1856,10 @@ msgstr "" "\n" "Voor een lijst van ingebouwde modules, gebruik `help(\"modules\")`.\n" +#: shared-bindings/wifi/Radio.c +msgid "WiFi password must be between 8 and 63 characters" +msgstr "" + #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Writes not supported on Characteristic" msgstr "Schrijven niet ondersteund op Characteristic" @@ -1946,7 +1974,7 @@ msgstr "slechte conversie specificatie" msgid "bad format string" msgstr "string met verkeerde indeling" -#: py/binary.c +#: py/binary.c py/objarray.c msgid "bad typecode" msgstr "verkeerde typecode" @@ -1999,6 +2027,10 @@ msgstr "byteorder is geen string" msgid "bytes > 8 bits not supported" msgstr "butes > 8 niet ondersteund" +#: py/objarray.c +msgid "bytes length not a multiple of item size" +msgstr "" + #: py/objstr.c msgid "bytes value out of range" msgstr "bytes waarde buiten bereik" @@ -2972,6 +3004,11 @@ msgstr "" msgid "overflow converting long int to machine word" msgstr "overloop bij converteren van long int naar machine word" +#: py/modstruct.c +#, c-format +msgid "pack expected %d items for packing (got %d)" +msgstr "" + #: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c msgid "palette must be 32 bytes long" msgstr "palette moet 32 bytes lang zijn" @@ -3448,6 +3485,13 @@ msgstr "zi moet van type float zijn" msgid "zi must be of shape (n_section, 2)" msgstr "zi moet vorm (n_section, 2) hebben" +#~ msgid "" +#~ "\n" +#~ "To exit, please reset the board without " +#~ msgstr "" +#~ "\n" +#~ "Om te verlaten, herstart de module zonder " + #~ msgid "PulseOut not supported on this chip" #~ msgstr "PulseOut niet ondersteund door deze chip" diff --git a/locale/pl.po b/locale/pl.po index cd4b905e7..8b4fceee4 100644 --- a/locale/pl.po +++ b/locale/pl.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-30 14:38-0400\n" +"POT-Creation-Date: 2020-09-13 14:21-0500\n" "PO-Revision-Date: 2019-03-19 18:37-0700\n" "Last-Translator: Radomir Dopieralski <circuitpython@sheep.art.pl>\n" "Language-Team: pl\n" @@ -30,12 +30,6 @@ msgid "" "https://github.com/adafruit/circuitpython/issues\n" msgstr "" -#: supervisor/shared/safe_mode.c -msgid "" -"\n" -"To exit, please reset the board without " -msgstr "" - #: py/obj.c msgid " File \"%q\"" msgstr " Plik \"%q\"" @@ -273,7 +267,7 @@ msgstr "3-argumentowy pow() jest niewspierany" msgid "A hardware interrupt channel is already in use" msgstr "Kanał przerwań sprzętowych w użyciu" -#: shared-bindings/_bleio/Address.c +#: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c #, c-format msgid "Address must be %d bytes long" msgstr "Adres musi mieć %d bajtów" @@ -371,6 +365,10 @@ msgstr "" msgid "Attempted heap allocation when MicroPython VM not running." msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "Authentication failure" +msgstr "" + #: main.c msgid "Auto-reload is off.\n" msgstr "Samo-przeładowywanie wyłączone.\n" @@ -580,6 +578,10 @@ msgid "" "boot. Press again to exit safe mode.\n" msgstr "" +#: supervisor/shared/safe_mode.c +msgid "CircuitPython was unable to allocate the heap.\n" +msgstr "" + #: shared-module/bitbangio/SPI.c msgid "Clock pin init failed." msgstr "Nie powiodło się ustawienie nóżki zegara" @@ -1225,6 +1227,10 @@ msgstr "" msgid "No more timers available on this pin." msgstr "" +#: shared-bindings/wifi/Radio.c +msgid "No network with that ssid" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" @@ -1245,6 +1251,10 @@ msgstr "" msgid "Nordic Soft Device failure assertion." msgstr "" +#: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c +msgid "Not a valid IP string" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #: shared-bindings/_bleio/CharacteristicBuffer.c msgid "Not connected" @@ -1289,6 +1299,10 @@ msgid "" "%d bpp given" msgstr "" +#: shared-bindings/ipaddress/__init__.c +msgid "Only raw int supported for ip" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "Nadpróbkowanie musi być wielokrotnością 8." @@ -1485,6 +1499,10 @@ msgstr "" msgid "Serializer in use" msgstr "Serializator w użyciu" +#: shared-bindings/ssl/SSLContext.c +msgid "Server side context cannot have hostname" +msgstr "" + #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "Fragment i wartość są różnych długości." @@ -1585,6 +1603,10 @@ msgid "" "Timer was reserved for internal use - declare PWM pins earlier in the program" msgstr "" +#: supervisor/shared/safe_mode.c +msgid "To exit, please reset the board without " +msgstr "By wyjść, proszę zresetować płytkę bez " + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Too many channels in sample." msgstr "Zbyt wiele kanałów." @@ -1680,6 +1702,10 @@ msgstr "Błąd zapisu do NVM." msgid "Unexpected nrfx uuid type" msgstr "Nieoczekiwany typ nrfx uuid." +#: shared-bindings/wifi/Radio.c +msgid "Unknown failure" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown gatt error: 0x%04x" @@ -1786,6 +1812,10 @@ msgstr "" "Podręczniki dostępne na learn.adafruit.com/category/circuitpyhon.\n" "Aby zobaczyć wbudowane moduły, wpisz `help(\"modules\")`.\n" +#: shared-bindings/wifi/Radio.c +msgid "WiFi password must be between 8 and 63 characters" +msgstr "" + #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Writes not supported on Characteristic" msgstr "" @@ -1900,7 +1930,7 @@ msgstr "zły specyfikator konwersji" msgid "bad format string" msgstr "zła specyfikacja formatu" -#: py/binary.c +#: py/binary.c py/objarray.c msgid "bad typecode" msgstr "zły typecode" @@ -1953,6 +1983,10 @@ msgstr "" msgid "bytes > 8 bits not supported" msgstr "bajty większe od 8 bitów są niewspierane" +#: py/objarray.c +msgid "bytes length not a multiple of item size" +msgstr "" + #: py/objstr.c msgid "bytes value out of range" msgstr "wartość bytes poza zakresem" @@ -2919,6 +2953,11 @@ msgstr "" msgid "overflow converting long int to machine word" msgstr "przepełnienie przy konwersji long in to słowa maszynowego" +#: py/modstruct.c +#, c-format +msgid "pack expected %d items for packing (got %d)" +msgstr "" + #: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c msgid "palette must be 32 bytes long" msgstr "paleta musi mieć 32 bajty długości" @@ -3703,9 +3742,6 @@ msgstr "" #~ msgid "Tile indices must be 0 - 255" #~ msgstr "Indeks kafelka musi być pomiędzy 0 a 255 włącznie" -#~ msgid "To exit, please reset the board without " -#~ msgstr "By wyjść, proszę zresetować płytkę bez " - #~ msgid "UUID integer value not in range 0 to 0xffff" #~ msgstr "Wartość UUID poza zakresem 0 do 0xffff" diff --git a/locale/pt_BR.po b/locale/pt_BR.po index b40d33f80..70cecc395 100644 --- a/locale/pt_BR.po +++ b/locale/pt_BR.po @@ -5,8 +5,8 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-30 14:38-0400\n" -"PO-Revision-Date: 2020-09-02 22:32+0000\n" +"POT-Creation-Date: 2020-09-13 14:21-0500\n" +"PO-Revision-Date: 2020-09-14 13:47+0000\n" "Last-Translator: Wellington Terumi Uemura <wellingtonuemura@gmail.com>\n" "Language-Team: \n" "Language: pt_BR\n" @@ -34,14 +34,6 @@ msgstr "" "Registre um problema com o conteúdo do seu controlador no CIRCUITPY\n" "https://github.com/adafruit/circuitpython/issues\n" -#: supervisor/shared/safe_mode.c -msgid "" -"\n" -"To exit, please reset the board without " -msgstr "" -"\n" -"Para encerrar, redefina a placa sem " - #: py/obj.c msgid " File \"%q\"" msgstr " Arquivo \"%q\"" @@ -283,7 +275,7 @@ msgstr "3-arg pow() não compatível" msgid "A hardware interrupt channel is already in use" msgstr "Um canal de interrupção de hardware já está em uso" -#: shared-bindings/_bleio/Address.c +#: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c #, c-format msgid "Address must be %d bytes long" msgstr "O endereço deve ter %d bytes de comprimento" @@ -383,6 +375,10 @@ msgstr "" "A tentativa da área de alocação dinâmica de variáveis (heap) quando o " "MicroPython VM não está em execução." +#: shared-bindings/wifi/Radio.c +msgid "Authentication failure" +msgstr "Houve um falha na autenticação" + #: main.c msgid "Auto-reload is off.\n" msgstr "A atualização automática está desligada.\n" @@ -600,6 +596,10 @@ msgstr "" "redefinição durante a inicialização. Pressione novamente para sair do modo " "de segurança.\n" +#: supervisor/shared/safe_mode.c +msgid "CircuitPython was unable to allocate the heap.\n" +msgstr "O CircuitPython não conseguiu alocar o heap.\n" + #: shared-module/bitbangio/SPI.c msgid "Clock pin init failed." msgstr "Inicialização do pino de Clock falhou." @@ -1248,6 +1248,10 @@ msgstr "Não há compatibilidade com inteiro longo" msgid "No more timers available on this pin." msgstr "Não há mais temporizadores disponíveis neste pino." +#: shared-bindings/wifi/Radio.c +msgid "No network with that ssid" +msgstr "Não há rede com este ssid" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Não há pulldown no pino; É recomendável utilizar um resistor de 1M ohm" @@ -1268,6 +1272,10 @@ msgstr "Não há um temporizador disponível" msgid "Nordic Soft Device failure assertion." msgstr "Declaração de falha do dispositivo Nordic Soft." +#: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c +msgid "Not a valid IP string" +msgstr "Não é uma sequência válida de IP" + #: ports/nrf/common-hal/_bleio/__init__.c #: shared-bindings/_bleio/CharacteristicBuffer.c msgid "Not connected" @@ -1317,6 +1325,10 @@ msgstr "" "São compatíveis apenas os BMPs monocromáticos, indexados em 4bpp ou 8bpp e " "16bpp ou superior: determinado %d bpp" +#: shared-bindings/ipaddress/__init__.c +msgid "Only raw int supported for ip" +msgstr "Apenas o int bruto é compatível para o ip" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "A superamostragem deve ser um múltiplo de 8." @@ -1525,6 +1537,10 @@ msgstr "O pino RTS selecionado é inválido" msgid "Serializer in use" msgstr "Serializer em uso" +#: shared-bindings/ssl/SSLContext.c +msgid "Server side context cannot have hostname" +msgstr "O contexto do lado do servidor não pode ter nome de host" + #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "Fatie e avalie os diferentes comprimentos." @@ -1638,6 +1654,10 @@ msgstr "" "O temporizador foi reservado para uso interno - declare os pinos PWM no " "início do programa" +#: supervisor/shared/safe_mode.c +msgid "To exit, please reset the board without " +msgstr "Para sair, por favor, reinicie a placa sem " + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Too many channels in sample." msgstr "Muitos canais na amostra." @@ -1734,6 +1754,10 @@ msgstr "Não é possível gravar no nvm." msgid "Unexpected nrfx uuid type" msgstr "Tipo uuid nrfx inesperado" +#: shared-bindings/wifi/Radio.c +msgid "Unknown failure" +msgstr "Falha desconhecida" + #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown gatt error: 0x%04x" @@ -1849,6 +1873,10 @@ msgstr "" "\n" "Para listar os módulos internos, faça `help(\"modules\")`.\n" +#: shared-bindings/wifi/Radio.c +msgid "WiFi password must be between 8 and 63 characters" +msgstr "A senha do Wi-Fi deve ter entre 8 e 63 caracteres" + #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Writes not supported on Characteristic" msgstr "A escrita não é compatível na Característica" @@ -1963,7 +1991,7 @@ msgstr "especificador de conversão incorreto" msgid "bad format string" msgstr "formato da string incorreta" -#: py/binary.c +#: py/binary.c py/objarray.c msgid "bad typecode" msgstr "typecode incorreto" @@ -2016,6 +2044,10 @@ msgstr "a ordem dos bytes não é uma cadeia de caracteres" msgid "bytes > 8 bits not supported" msgstr "bytes > 8 bits não suportado" +#: py/objarray.c +msgid "bytes length not a multiple of item size" +msgstr "o comprimento dos bytes não é um múltiplo do tamanho do item" + #: py/objstr.c msgid "bytes value out of range" msgstr "o valor dos bytes estão fora do alcance" @@ -3001,6 +3033,11 @@ msgstr "" "houve um transbordamento durante a conversão int longo para a palavra de " "máquina" +#: py/modstruct.c +#, c-format +msgid "pack expected %d items for packing (got %d)" +msgstr "o pacote previa %d itens para a empacotamento (obteve %d)" + #: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c msgid "palette must be 32 bytes long" msgstr "a paleta deve ter 32 bytes de comprimento" @@ -3476,6 +3513,13 @@ msgstr "zi deve ser de um tipo float" msgid "zi must be of shape (n_section, 2)" msgstr "zi deve estar na forma (n_section, 2)" +#~ msgid "" +#~ "\n" +#~ "To exit, please reset the board without " +#~ msgstr "" +#~ "\n" +#~ "Para encerrar, redefina a placa sem " + #~ msgid "PulseOut not supported on this chip" #~ msgstr "O PulseOut não é compatível neste CI" @@ -3799,9 +3843,6 @@ msgstr "zi deve estar na forma (n_section, 2)" #~ msgid "STA required" #~ msgstr "STA requerido" -#~ msgid "To exit, please reset the board without " -#~ msgstr "Para sair, por favor, reinicie a placa sem " - #~ msgid "UART(%d) does not exist" #~ msgstr "UART(%d) não existe" diff --git a/locale/sv.po b/locale/sv.po index eb131ef54..cc3cd4593 100644 --- a/locale/sv.po +++ b/locale/sv.po @@ -5,7 +5,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-30 14:38-0400\n" +"POT-Creation-Date: 2020-09-13 14:21-0500\n" "PO-Revision-Date: 2020-09-07 19:36+0000\n" "Last-Translator: Jonny Bergdahl <jonny@bergdahl.it>\n" "Language-Team: LANGUAGE <LL@li.org>\n" @@ -34,14 +34,6 @@ msgstr "" "Vänligen skapa ett ärende med innehållet i din CIRCUITPY-enhet på\n" "https://github.com/adafruit/circuitpython/issues\n" -#: supervisor/shared/safe_mode.c -msgid "" -"\n" -"To exit, please reset the board without " -msgstr "" -"\n" -"För att avsluta, gör reset på kortet utan " - #: py/obj.c msgid " File \"%q\"" msgstr " Filen \"%q\"" @@ -279,7 +271,7 @@ msgstr "3-arguments pow() stöds inte" msgid "A hardware interrupt channel is already in use" msgstr "En kanal för hårdvaruavbrott används redan" -#: shared-bindings/_bleio/Address.c +#: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c #, c-format msgid "Address must be %d bytes long" msgstr "Adressen måste vara %d byte lång" @@ -377,6 +369,10 @@ msgstr "Försök att tilldela %d block" msgid "Attempted heap allocation when MicroPython VM not running." msgstr "Försökte tilldela heap när MicroPython VM inte körs." +#: shared-bindings/wifi/Radio.c +msgid "Authentication failure" +msgstr "" + #: main.c msgid "Auto-reload is off.\n" msgstr "Autoladdning är avstängd.\n" @@ -590,6 +586,10 @@ msgstr "" "CircuitPython är i säkert läge eftersom du tryckte på återställningsknappen " "under start. Tryck igen för att lämna säkert läge.\n" +#: supervisor/shared/safe_mode.c +msgid "CircuitPython was unable to allocate the heap.\n" +msgstr "" + #: shared-module/bitbangio/SPI.c msgid "Clock pin init failed." msgstr "Initiering av klockpinne misslyckades." @@ -1238,6 +1238,10 @@ msgstr "Inget stöd för långt heltal" msgid "No more timers available on this pin." msgstr "Inga fler timers tillgängliga på denna pinne." +#: shared-bindings/wifi/Radio.c +msgid "No network with that ssid" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Ingen pulldown på pinnen; 1Mohm rekommenderas" @@ -1258,6 +1262,10 @@ msgstr "Ingen timer tillgänglig" msgid "Nordic Soft Device failure assertion." msgstr "Påståendet om Nordic Soft Device-fel." +#: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c +msgid "Not a valid IP string" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #: shared-bindings/_bleio/CharacteristicBuffer.c msgid "Not connected" @@ -1307,6 +1315,10 @@ msgstr "" "Endast monokrom, indexerad 4 bpp eller 8 bpp och 16 bpp eller högre BMP: er " "stöds: %d bpp angiven" +#: shared-bindings/ipaddress/__init__.c +msgid "Only raw int supported for ip" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "Översampling måste vara multipel av 8." @@ -1511,6 +1523,10 @@ msgstr "Vald CTS-pinne är inte giltig" msgid "Serializer in use" msgstr "Serializern används redan" +#: shared-bindings/ssl/SSLContext.c +msgid "Server side context cannot have hostname" +msgstr "" + #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "Slice och värde har olika längd." @@ -1621,6 +1637,10 @@ msgstr "" "Timern är reserverad för internt bruk - deklarera PWM-pinne tidigare i " "programmet" +#: supervisor/shared/safe_mode.c +msgid "To exit, please reset the board without " +msgstr "" + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Too many channels in sample." msgstr "För många kanaler i sampling." @@ -1716,6 +1736,10 @@ msgstr "Det gick inte att skriva till nvm." msgid "Unexpected nrfx uuid type" msgstr "Oväntad nrfx uuid-typ" +#: shared-bindings/wifi/Radio.c +msgid "Unknown failure" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown gatt error: 0x%04x" @@ -1827,6 +1851,10 @@ msgstr "" "\n" "För att lista inbyggda moduler, ange `help(\"modules\")`.\n" +#: shared-bindings/wifi/Radio.c +msgid "WiFi password must be between 8 and 63 characters" +msgstr "" + #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Writes not supported on Characteristic" msgstr "Skrivning stöds inte på karaktäristik" @@ -1941,7 +1969,7 @@ msgstr "Ogiltig konverteringsspecifikation" msgid "bad format string" msgstr "Ogiltig formatsträng" -#: py/binary.c +#: py/binary.c py/objarray.c msgid "bad typecode" msgstr "Ogiltig typkod" @@ -1994,6 +2022,10 @@ msgstr "byteorder är inte en sträng" msgid "bytes > 8 bits not supported" msgstr "bytes> 8 bitar stöds inte" +#: py/objarray.c +msgid "bytes length not a multiple of item size" +msgstr "" + #: py/objstr.c msgid "bytes value out of range" msgstr "bytevärde utanför intervallet" @@ -2967,6 +2999,11 @@ msgstr "utanför räckvidd för target" msgid "overflow converting long int to machine word" msgstr "Konvertering av long int till machine word överskred maxvärde" +#: py/modstruct.c +#, c-format +msgid "pack expected %d items for packing (got %d)" +msgstr "" + #: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c msgid "palette must be 32 bytes long" msgstr "palette måste vara 32 bytes lång" @@ -3443,6 +3480,13 @@ msgstr "zi måste vara av typ float" msgid "zi must be of shape (n_section, 2)" msgstr "zi måste vara i formen (n_section, 2)" +#~ msgid "" +#~ "\n" +#~ "To exit, please reset the board without " +#~ msgstr "" +#~ "\n" +#~ "För att avsluta, gör reset på kortet utan " + #~ msgid "PulseOut not supported on this chip" #~ msgstr "PulseIn stöds inte av detta chip" diff --git a/locale/zh_Latn_pinyin.po b/locale/zh_Latn_pinyin.po index 56f9bae8c..9b9c1414a 100644 --- a/locale/zh_Latn_pinyin.po +++ b/locale/zh_Latn_pinyin.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: circuitpython-cn\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2020-08-30 14:38-0400\n" +"POT-Creation-Date: 2020-09-13 14:21-0500\n" "PO-Revision-Date: 2019-04-13 10:10-0700\n" "Last-Translator: hexthat\n" "Language-Team: Chinese Hanyu Pinyin\n" @@ -34,14 +34,6 @@ msgstr "" "Qǐng tōngguò https://github.com/adafruit/circuitpython/issues\n" "tíjiāo yǒuguān nín de CIRCUITPY qūdòngqì nèiróng de wèntí \n" -#: supervisor/shared/safe_mode.c -msgid "" -"\n" -"To exit, please reset the board without " -msgstr "" -"\n" -"Qǐng zài méiyǒu _ de qíngkuàng xià chóng zhì bǎn zǐ yǐ tuìchū " - #: py/obj.c msgid " File \"%q\"" msgstr " Wénjiàn \"%q\"" @@ -280,7 +272,7 @@ msgstr "bù zhīchí 3-arg pow ()" msgid "A hardware interrupt channel is already in use" msgstr "Yìngjiàn zhōngduàn tōngdào yǐ zài shǐyòng zhōng" -#: shared-bindings/_bleio/Address.c +#: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c #, c-format msgid "Address must be %d bytes long" msgstr "Dìzhǐ bìxū shì %d zì jié zhǎng" @@ -378,6 +370,10 @@ msgstr "cháng shì fēn pèi %d kuài" msgid "Attempted heap allocation when MicroPython VM not running." msgstr "MicroPython VM zài wèi yùnxíng shí chángshì fēnpèi duī." +#: shared-bindings/wifi/Radio.c +msgid "Authentication failure" +msgstr "" + #: main.c msgid "Auto-reload is off.\n" msgstr "Zìdòng chóngxīn jiāzài yǐ guānbì.\n" @@ -589,6 +585,10 @@ msgstr "" "CircuitPython chǔyú ānquán móshì, yīnwèi zài yǐndǎo guòchéng zhōng àn xiàle " "chóng zhì ànniǔ. Zài àn yīcì tuìchū ānquán móshì.\n" +#: supervisor/shared/safe_mode.c +msgid "CircuitPython was unable to allocate the heap.\n" +msgstr "" + #: shared-module/bitbangio/SPI.c msgid "Clock pin init failed." msgstr "Shízhōng de yǐn jiǎo chūshǐhuà shībài." @@ -1234,6 +1234,10 @@ msgstr "Méiyǒu zhǎng zhěngshù zhīchí" msgid "No more timers available on this pin." msgstr "Gāi yǐn jiǎo shàng méiyǒu kěyòng de dìngshí qì." +#: shared-bindings/wifi/Radio.c +msgid "No network with that ssid" +msgstr "" + #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Yǐn jiǎo shàng méiyǒu xiàlā; 1Mohm tuījiàn" @@ -1254,6 +1258,10 @@ msgstr "Méiyǒu jìshí qì" msgid "Nordic Soft Device failure assertion." msgstr "Nordic ruǎn shèbèi gùzhàng shēngmíng." +#: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c +msgid "Not a valid IP string" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #: shared-bindings/_bleio/CharacteristicBuffer.c msgid "Not connected" @@ -1303,6 +1311,10 @@ msgstr "" "Jǐn zhīchí dān sè, suǒyǐn wéi 4bpp huò 8bpp yǐjí 16bpp huò gèng gāo de BMP: " "Gěi chū %d bpp" +#: shared-bindings/ipaddress/__init__.c +msgid "Only raw int supported for ip" +msgstr "" + #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "Guò cǎiyàng bìxū shì 8 de bèishù." @@ -1503,6 +1515,10 @@ msgstr "Suǒ xuǎn de RTS yǐn jiǎo wúxiào" msgid "Serializer in use" msgstr "Xùliè huà yǐjīng shǐyòngguò" +#: shared-bindings/ssl/SSLContext.c +msgid "Server side context cannot have hostname" +msgstr "" + #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "Qiēpiàn hé zhí bùtóng chángdù." @@ -1612,6 +1628,10 @@ msgstr "" "Dìngshí qì bǎoliú gōng nèibù shǐyòng-zài chéngxù de qiánmiàn shēngmíng PWM " "yǐn jiǎo" +#: supervisor/shared/safe_mode.c +msgid "To exit, please reset the board without " +msgstr "Yào tuìchū, qǐng chóng zhì bǎnkuài ér bùyòng " + #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Too many channels in sample." msgstr "Chōuyàng zhōng de píndào tài duō." @@ -1707,6 +1727,10 @@ msgstr "Wúfǎ xiě rù nvm." msgid "Unexpected nrfx uuid type" msgstr "Yìwài de nrfx uuid lèixíng" +#: shared-bindings/wifi/Radio.c +msgid "Unknown failure" +msgstr "" + #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown gatt error: 0x%04x" @@ -1818,6 +1842,10 @@ msgstr "" "\n" "Ruò yào liè chū nèizài de mókuài, qǐng qǐng zuò yǐxià `help(\"modules\")`.\n" +#: shared-bindings/wifi/Radio.c +msgid "WiFi password must be between 8 and 63 characters" +msgstr "" + #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Writes not supported on Characteristic" msgstr "Tèzhēng bù zhīchí xiě rù" @@ -1932,7 +1960,7 @@ msgstr "cuòwù zhuǎnhuàn biāozhù" msgid "bad format string" msgstr "géshì cuòwù zìfú chuàn" -#: py/binary.c +#: py/binary.c py/objarray.c msgid "bad typecode" msgstr "cuòwù de dàimǎ lèixíng" @@ -1985,6 +2013,10 @@ msgstr "byteorder bùshì zìfú chuàn" msgid "bytes > 8 bits not supported" msgstr "zì jié > 8 wèi" +#: py/objarray.c +msgid "bytes length not a multiple of item size" +msgstr "" + #: py/objstr.c msgid "bytes value out of range" msgstr "zì jié zhí chāochū fànwéi" @@ -2956,6 +2988,11 @@ msgstr "" msgid "overflow converting long int to machine word" msgstr "chāo gāo zhuǎnhuàn zhǎng zhěng shùzì shí" +#: py/modstruct.c +#, c-format +msgid "pack expected %d items for packing (got %d)" +msgstr "" + #: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c msgid "palette must be 32 bytes long" msgstr "yánsè bìxū shì 32 gè zì jié" @@ -3431,6 +3468,13 @@ msgstr "zi bìxū wèi fú diǎn xíng" msgid "zi must be of shape (n_section, 2)" msgstr "zi bìxū jùyǒu xíngzhuàng (n_section,2)" +#~ msgid "" +#~ "\n" +#~ "To exit, please reset the board without " +#~ msgstr "" +#~ "\n" +#~ "Qǐng zài méiyǒu _ de qíngkuàng xià chóng zhì bǎn zǐ yǐ tuìchū " + #~ msgid "tuple/list required on RHS" #~ msgstr "RHS yāoqiú de yuán zǔ/lièbiǎo" @@ -3806,9 +3850,6 @@ msgstr "zi bìxū jùyǒu xíngzhuàng (n_section,2)" #~ msgid "Tile indices must be 0 - 255" #~ msgstr "Píng pū zhǐshù bìxū wèi 0 - 255" -#~ msgid "To exit, please reset the board without " -#~ msgstr "Yào tuìchū, qǐng chóng zhì bǎnkuài ér bùyòng " - #~ msgid "UUID integer value not in range 0 to 0xffff" #~ msgstr "UUID zhěngshù zhí bùzài fànwéi 0 zhì 0xffff" diff --git a/ports/atmel-samd/Makefile b/ports/atmel-samd/Makefile index 489f3a7af..72c7d9688 100644 --- a/ports/atmel-samd/Makefile +++ b/ports/atmel-samd/Makefile @@ -255,7 +255,7 @@ SRC_ASF += \ hal/src/hal_mci_sync.c \ hpl/sdhc/hpl_sdhc.c \ -$(BUILD)/asf4/$(CHIP_FAMILY)/hpl/sdhc/hpl_sdhc.o: CFLAGS += -Wno-cast-align +$(BUILD)/asf4/$(CHIP_FAMILY)/hpl/sdhc/hpl_sdhc.o: CFLAGS += -Wno-cast-align -Wno-implicit-fallthrough endif $(BUILD)/asf4/$(CHIP_FAMILY)/hpl/sercom/hpl_sercom.o: CFLAGS += -Wno-maybe-uninitialized diff --git a/ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h b/ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h index 12c48b1e3..54789f04f 100644 --- a/ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h +++ b/ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h @@ -25,7 +25,7 @@ #define CALIBRATE_CRYSTALLESS 1 // Explanation of how a user got into safe mode. -#define BOARD_USER_SAFE_MODE_ACTION "pressing both buttons at start up" +#define BOARD_USER_SAFE_MODE_ACTION "pressing both buttons at start up.\n" // Increase stack size slightly due to CPX library import nesting #define CIRCUITPY_DEFAULT_STACK_SIZE (4248) //divisible by 8 diff --git a/ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h b/ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h index 95b4ec110..e377275b7 100644 --- a/ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h +++ b/ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h @@ -27,7 +27,7 @@ #define USER_NEOPIXELS_PIN (&pin_PB23) // Explanation of how a user got into safe mode. -#define BOARD_USER_SAFE_MODE_ACTION "pressing both buttons at start up" +#define BOARD_USER_SAFE_MODE_ACTION "pressing both buttons at start up.\n" // Increase stack size slightly due to CPX library import nesting #define CIRCUITPY_DEFAULT_STACK_SIZE (4248) // divisible by 8 diff --git a/ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h b/ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h index d478ea38b..cacbed0de 100644 --- a/ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h +++ b/ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h @@ -25,7 +25,7 @@ #define CALIBRATE_CRYSTALLESS 1 // Explanation of how a user got into safe mode. -#define BOARD_USER_SAFE_MODE_ACTION "pressing both buttons at start up" +#define BOARD_USER_SAFE_MODE_ACTION "pressing both buttons at start up.\n" // Increase stack size slightly due to CPX library import nesting. #define CIRCUITPY_DEFAULT_STACK_SIZE (4248) // divisible by 8 diff --git a/ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h b/ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h index 3a984188f..ac1add545 100644 --- a/ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h +++ b/ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h @@ -11,7 +11,7 @@ #define CALIBRATE_CRYSTALLESS 1 // Explanation of how a user got into safe mode. -#define BOARD_USER_SAFE_MODE_ACTION "pressing both buttons at start up" +#define BOARD_USER_SAFE_MODE_ACTION "pressing both buttons at start up.\n" #define DEFAULT_I2C_BUS_SCL (&pin_PA08) #define DEFAULT_I2C_BUS_SDA (&pin_PA09) diff --git a/ports/atmel-samd/boards/feather_m4_express/mpconfigboard.h b/ports/atmel-samd/boards/feather_m4_express/mpconfigboard.h index ba16d17ee..a57b18e24 100644 --- a/ports/atmel-samd/boards/feather_m4_express/mpconfigboard.h +++ b/ports/atmel-samd/boards/feather_m4_express/mpconfigboard.h @@ -16,8 +16,6 @@ #define MICROPY_PORT_C (0) #define MICROPY_PORT_D (0) -#define EXTERNAL_FLASH_QSPI_DUAL - #define BOARD_HAS_CRYSTAL 1 #define DEFAULT_I2C_BUS_SCL (&pin_PA13) diff --git a/ports/atmel-samd/boards/meowmeow/mpconfigboard.h b/ports/atmel-samd/boards/meowmeow/mpconfigboard.h index 80d367863..79d477cac 100644 --- a/ports/atmel-samd/boards/meowmeow/mpconfigboard.h +++ b/ports/atmel-samd/boards/meowmeow/mpconfigboard.h @@ -11,7 +11,7 @@ #define CALIBRATE_CRYSTALLESS 1 // Explanation of how a user got into safe mode. -#define BOARD_USER_SAFE_MODE_ACTION "pressing both buttons at start up" +#define BOARD_USER_SAFE_MODE_ACTION "pressing both buttons at start up.\n" #define DEFAULT_I2C_BUS_SCL (&pin_PA01) #define DEFAULT_I2C_BUS_SDA (&pin_PA00) diff --git a/ports/atmel-samd/boards/qtpy_m0/board.c b/ports/atmel-samd/boards/qtpy_m0/board.c new file mode 100644 index 000000000..2add1867c --- /dev/null +++ b/ports/atmel-samd/boards/qtpy_m0/board.c @@ -0,0 +1,43 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" +#include "common-hal/microcontroller/Pin.h" +#include "supervisor/shared/board.h" +#include "hal/include/hal_gpio.h" + +void board_init(void) { + gpio_set_pin_function(PIN_PA18, GPIO_PIN_FUNCTION_OFF); + gpio_set_pin_direction(PIN_PA18, GPIO_DIRECTION_OUT); + gpio_set_pin_level(PIN_PA18, true); // Turn on neopixel by default +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { +} diff --git a/ports/atmel-samd/boards/qtpy_m0/mpconfigboard.h b/ports/atmel-samd/boards/qtpy_m0/mpconfigboard.h new file mode 100644 index 000000000..a88c1992d --- /dev/null +++ b/ports/atmel-samd/boards/qtpy_m0/mpconfigboard.h @@ -0,0 +1,55 @@ +#define MICROPY_HW_BOARD_NAME "Adafruit QT Py M0" +#define MICROPY_HW_MCU_NAME "samd21e18" + +#define MICROPY_HW_NEOPIXEL (&pin_PA19) + +#define MICROPY_PORT_A (0) +#define MICROPY_PORT_B (0) +#define MICROPY_PORT_C (0) + +#define IGNORE_PIN_PA00 1 +#define IGNORE_PIN_PA01 1 +#define IGNORE_PIN_PA09 1 +#define IGNORE_PIN_PA12 1 +#define IGNORE_PIN_PA13 1 +#define IGNORE_PIN_PA20 1 +#define IGNORE_PIN_PA21 1 +// USB is always used internally so skip the pin objects for it. +#define IGNORE_PIN_PA24 1 +#define IGNORE_PIN_PA25 1 +#define IGNORE_PIN_PA27 1 +#define IGNORE_PIN_PA28 1 +#define IGNORE_PIN_PA30 1 +#define IGNORE_PIN_PA31 1 +#define IGNORE_PIN_PB01 1 +#define IGNORE_PIN_PB02 1 +#define IGNORE_PIN_PB03 1 +#define IGNORE_PIN_PB04 1 +#define IGNORE_PIN_PB05 1 +#define IGNORE_PIN_PB06 1 +#define IGNORE_PIN_PB07 1 +#define IGNORE_PIN_PB08 1 +#define IGNORE_PIN_PB09 1 +#define IGNORE_PIN_PB10 1 +#define IGNORE_PIN_PB11 1 +#define IGNORE_PIN_PB12 1 +#define IGNORE_PIN_PB13 1 +#define IGNORE_PIN_PB14 1 +#define IGNORE_PIN_PB15 1 +#define IGNORE_PIN_PB16 1 +#define IGNORE_PIN_PB17 1 +#define IGNORE_PIN_PB22 1 +#define IGNORE_PIN_PB23 1 +#define IGNORE_PIN_PB30 1 +#define IGNORE_PIN_PB31 1 +#define IGNORE_PIN_PB00 1 + +#define DEFAULT_I2C_BUS_SCL (&pin_PA17) +#define DEFAULT_I2C_BUS_SDA (&pin_PA16) + +#define DEFAULT_SPI_BUS_SCK (&pin_PA11) +#define DEFAULT_SPI_BUS_MOSI (&pin_PA08) +#define DEFAULT_SPI_BUS_MISO (&pin_PA10) + +#define DEFAULT_UART_BUS_RX (&pin_PA07) +#define DEFAULT_UART_BUS_TX (&pin_PA06) diff --git a/ports/atmel-samd/boards/qtpy_m0/mpconfigboard.mk b/ports/atmel-samd/boards/qtpy_m0/mpconfigboard.mk new file mode 100644 index 000000000..964cbe643 --- /dev/null +++ b/ports/atmel-samd/boards/qtpy_m0/mpconfigboard.mk @@ -0,0 +1,24 @@ +USB_VID = 0x239A +USB_PID = 0x80CC +USB_PRODUCT = "QT Py M0" +USB_MANUFACTURER = "Adafruit Industries LLC" + +CHIP_VARIANT = SAMD21E18A +CHIP_FAMILY = samd21 + +INTERNAL_FLASH_FILESYSTEM = 1 +LONGINT_IMPL = NONE +CIRCUITPY_FULL_BUILD = 0 + +SUPEROPT_GC = 0 + +CFLAGS_BOARD = --param max-inline-insns-auto=15 +ifeq ($(TRANSLATION), zh_Latn_pinyin) +RELEASE_NEEDS_CLEAN_BUILD = 1 +CFLAGS_INLINE_LIMIT = 35 +endif +ifeq ($(TRANSLATION), de_DE) +RELEASE_NEEDS_CLEAN_BUILD = 1 +CFLAGS_INLINE_LIMIT = 35 +SUPEROPT_VM = 0 +endif diff --git a/ports/atmel-samd/boards/qtpy_m0/pins.c b/ports/atmel-samd/boards/qtpy_m0/pins.c new file mode 100644 index 000000000..4ac10a7a6 --- /dev/null +++ b/ports/atmel-samd/boards/qtpy_m0/pins.c @@ -0,0 +1,49 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PA02) }, + { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA02) }, + + { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PA03) }, + { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA03) }, + + { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PA04) }, + { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA04) }, + + { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PA05) }, + { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PA05) }, + + { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PA16) }, + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA16) }, + + { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_PA17) }, + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA17) }, + + { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_PA06) }, + { MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_PA06) }, + { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PA06) }, + + { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_PA07) }, + { MP_ROM_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_PA07) }, + { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PA07) }, + + { MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_PA11) }, + { MP_ROM_QSTR(MP_QSTR_A8), MP_ROM_PTR(&pin_PA11) }, + { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA11) }, + + { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_PA10) }, + { MP_ROM_QSTR(MP_QSTR_A9), MP_ROM_PTR(&pin_PA10) }, + { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PA10) }, + + { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA08) }, + { MP_ROM_QSTR(MP_QSTR_A10), MP_ROM_PTR(&pin_PA08) }, + { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA08) }, + + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA19) }, + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL_POWER), MP_ROM_PTR(&pin_PA18) }, + + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, + { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, + { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h b/ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h index ed3f23a3c..2af3515f4 100644 --- a/ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h +++ b/ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h @@ -29,4 +29,8 @@ #define MICROPY_HW_BOARD_NAME "BastWiFi" #define MICROPY_HW_MCU_NAME "ESP32S2" +#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0) + +#define BOARD_USER_SAFE_MODE_ACTION "pressing boot button at start up.\n" + #define AUTORESET_DELAY_MS 500 diff --git a/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h b/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h index 84d15ffc2..a4c8e6576 100644 --- a/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h +++ b/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -31,4 +31,8 @@ #define MICROPY_HW_NEOPIXEL (&pin_GPIO45) +#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0) + +#define BOARD_USER_SAFE_MODE_ACTION "pressing boot button at start up.\n" + #define AUTORESET_DELAY_MS 500 diff --git a/ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h b/ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h index a94f10ea4..335aaeb5e 100644 --- a/ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h +++ b/ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h @@ -31,4 +31,8 @@ #define MICROPY_HW_NEOPIXEL (&pin_GPIO18) +#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0) + +#define BOARD_USER_SAFE_MODE_ACTION "pressing boot button at start up.\n" + #define AUTORESET_DELAY_MS 500 diff --git a/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h b/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h index 338186dc5..d3ef8bb26 100644 --- a/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +++ b/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h @@ -31,4 +31,8 @@ #define MICROPY_HW_NEOPIXEL (&pin_GPIO18) +#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0) + +#define BOARD_USER_SAFE_MODE_ACTION "pressing boot button at start up.\n" + #define AUTORESET_DELAY_MS 500 diff --git a/ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h b/ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h index bb28fe16a..1a1ef7a6c 100644 --- a/ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h +++ b/ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h @@ -32,4 +32,8 @@ #define MICROPY_HW_LED (&pin_GPIO21) #define MICROPY_HW_NEOPIXEL (&pin_GPIO33) +#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0) + +#define BOARD_USER_SAFE_MODE_ACTION "pressing boot button at start up.\n" + #define AUTORESET_DELAY_MS 500 diff --git a/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h b/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h index 93fb0c573..a65d00206 100644 --- a/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h +++ b/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h @@ -29,6 +29,10 @@ #define MICROPY_HW_BOARD_NAME "FeatherS2" #define MICROPY_HW_MCU_NAME "ESP32S2" +#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0) + +#define BOARD_USER_SAFE_MODE_ACTION "pressing boot button at start up.\n" + #define AUTORESET_DELAY_MS 500 // Doesn't work with this on. diff --git a/ports/nrf/common-hal/_bleio/PacketBuffer.c b/ports/nrf/common-hal/_bleio/PacketBuffer.c index a8773f961..6d587984c 100644 --- a/ports/nrf/common-hal/_bleio/PacketBuffer.c +++ b/ports/nrf/common-hal/_bleio/PacketBuffer.c @@ -129,14 +129,12 @@ STATIC bool packet_buffer_on_ble_client_evt(ble_evt_t *ble_evt, void *param) { } break; } - case BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE: { + case BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE: queue_next_write(self); break; - } - case BLE_GATTC_EVT_WRITE_RSP: { + case BLE_GATTC_EVT_WRITE_RSP: queue_next_write(self); break; - } default: return false; break; @@ -171,14 +169,14 @@ STATIC bool packet_buffer_on_ble_server_evt(ble_evt_t *ble_evt, void *param) { } break; } - case BLE_GAP_EVT_DISCONNECTED: { + case BLE_GAP_EVT_DISCONNECTED: if (self->conn_handle == ble_evt->evt.gap_evt.conn_handle) { self->conn_handle = BLE_CONN_HANDLE_INVALID; } - } - case BLE_GATTS_EVT_HVN_TX_COMPLETE: { + break; + case BLE_GATTS_EVT_HVN_TX_COMPLETE: queue_next_write(self); - } + break; default: return false; break; diff --git a/py/binary.c b/py/binary.c index cd0f1aa4d..b85edba62 100644 --- a/py/binary.c +++ b/py/binary.c @@ -126,7 +126,6 @@ mp_obj_t mp_binary_get_val_array(char typecode, void *p, mp_uint_t index) { break; case BYTEARRAY_TYPECODE: case 'B': - case 'x': // value will be discarded val = ((unsigned char*)p)[index]; break; case 'h': @@ -330,7 +329,11 @@ void mp_binary_set_val(char struct_type, char val_type, mp_obj_t val_in, byte ** } } - mp_binary_set_int(MIN((size_t)size, sizeof(val)), struct_type == '>', p, val); + if (val_type == 'x') { + memset(p, 0, 1); + } else { + mp_binary_set_int(MIN((size_t)size, sizeof(val)), struct_type == '>', p, val); + } } void mp_binary_set_val_array(char typecode, void *p, mp_uint_t index, mp_obj_t val_in) { @@ -379,8 +382,6 @@ void mp_binary_set_val_array_from_int(char typecode, void *p, mp_uint_t index, m case 'B': ((unsigned char*)p)[index] = val; break; - case 'x': - ((unsigned char*)p)[index] = 0; case 'h': ((short*)p)[index] = val; break; diff --git a/py/circuitpy_defns.mk b/py/circuitpy_defns.mk index 04e38d81e..0e87287c1 100644 --- a/py/circuitpy_defns.mk +++ b/py/circuitpy_defns.mk @@ -31,6 +31,7 @@ BASE_CFLAGS = \ -fsingle-precision-constant \ -fno-strict-aliasing \ -Wdouble-promotion \ + -Wimplicit-fallthrough=2 \ -Wno-endif-labels \ -Wstrict-prototypes \ -Werror-implicit-function-declaration \ diff --git a/py/modstruct.c b/py/modstruct.c index fe766a4de..7675de275 100644 --- a/py/modstruct.c +++ b/py/modstruct.c @@ -183,16 +183,21 @@ MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(struct_unpack_from_obj, 2, 3, struct_unpack_ // This function assumes there is enough room in p to store all the values STATIC void struct_pack_into_internal(mp_obj_t fmt_in, byte *p, size_t n_args, const mp_obj_t *args) { + size_t size; + size_t count = calc_size_items(mp_obj_str_get_str(fmt_in), &size); + if (count != n_args) { +#if MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE + mp_raise_ValueError(NULL); +#else + mp_raise_ValueError_varg(translate("pack expected %d items for packing (got %d)"), count, n_args); +#endif + } const char *fmt = mp_obj_str_get_str(fmt_in); char fmt_type = get_fmt_type(&fmt); size_t i; for (i = 0; i < n_args;) { mp_uint_t cnt = 1; - if (*fmt == '\0') { - // more arguments given than used by format string; CPython raises struct.error here - break; - } if (unichar_isdigit(*fmt)) { cnt = get_fmt_num(&fmt); } @@ -208,8 +213,7 @@ STATIC void struct_pack_into_internal(mp_obj_t fmt_in, byte *p, size_t n_args, c memset(p + to_copy, 0, cnt - to_copy); p += cnt; } else { - // If we run out of args then we just finish; CPython would raise struct.error - while (cnt-- && i < n_args) { + while (cnt--) { mp_binary_set_val(fmt_type, *fmt, args[i], &p); // Pad bytes don't have a corresponding argument. if (*fmt != 'x') { @@ -222,7 +226,6 @@ STATIC void struct_pack_into_internal(mp_obj_t fmt_in, byte *p, size_t n_args, c } STATIC mp_obj_t struct_pack(size_t n_args, const mp_obj_t *args) { - // TODO: "The arguments must match the values required by the format exactly." mp_int_t size = MP_OBJ_SMALL_INT_VALUE(struct_calcsize(args[0])); vstr_t vstr; vstr_init_len(&vstr, size); diff --git a/py/objarray.c b/py/objarray.c index 5d83f0697..e0b4cbd55 100644 --- a/py/objarray.c +++ b/py/objarray.c @@ -97,6 +97,9 @@ STATIC void array_print(const mp_print_t *print, mp_obj_t o_in, mp_print_kind_t #if MICROPY_PY_BUILTINS_BYTEARRAY || MICROPY_PY_ARRAY STATIC mp_obj_array_t *array_new(char typecode, size_t n) { + if (typecode == 'x') { + mp_raise_ValueError(translate("bad typecode")); + } int typecode_size = mp_binary_get_size('@', typecode, NULL); mp_obj_array_t *o = m_new_obj(mp_obj_array_t); #if MICROPY_PY_BUILTINS_BYTEARRAY && MICROPY_PY_ARRAY @@ -126,8 +129,10 @@ STATIC mp_obj_t array_construct(char typecode, mp_obj_t initializer) { || (MICROPY_PY_BUILTINS_BYTEARRAY && MP_OBJ_IS_TYPE(initializer, &mp_type_bytearray))))) && mp_get_buffer(initializer, &bufinfo, MP_BUFFER_READ)) { // construct array from raw bytes - // we round-down the len to make it a multiple of sz (CPython raises error) size_t sz = mp_binary_get_size('@', typecode, NULL); + if (bufinfo.len % sz) { + mp_raise_ValueError(translate("bytes length not a multiple of item size")); + } size_t len = bufinfo.len / sz; mp_obj_array_t *o = array_new(typecode, len); memcpy(o->items, bufinfo.buf, len * sz); diff --git a/py/objset.c b/py/objset.c index b8f0f07ed..45b5c1260 100644 --- a/py/objset.c +++ b/py/objset.c @@ -450,6 +450,7 @@ STATIC mp_obj_t set_unary_op(mp_unary_op_t op, mp_obj_t self_in) { return MP_OBJ_NEW_SMALL_INT(hash); } #endif + /* FALLTHROUGH */ default: return MP_OBJ_NULL; // op not supported } } diff --git a/shared-bindings/_bleio/Address.c b/shared-bindings/_bleio/Address.c index 1f168d31a..04c667db4 100644 --- a/shared-bindings/_bleio/Address.c +++ b/shared-bindings/_bleio/Address.c @@ -86,7 +86,7 @@ STATIC mp_obj_t bleio_address_make_new(const mp_obj_type_t *type, size_t n_args, //| or use `str()` on the :py:class:`~_bleio.Attribute` object itself, the address will be printed //| in the expected order. For example: //| -//| .. code-block:: pycon +//| .. code-block:: python //| //| >>> import _bleio //| >>> _bleio.adapter.address diff --git a/shared-bindings/socketpool/Socket.c b/shared-bindings/socketpool/Socket.c index 250e9c874..e1b1e6967 100644 --- a/shared-bindings/socketpool/Socket.c +++ b/shared-bindings/socketpool/Socket.c @@ -261,7 +261,7 @@ STATIC mp_obj_t socketpool_socket_recv_into(size_t n_args, const mp_obj_t *args) mp_int_t len = bufinfo.len; if (n_args == 3) { mp_int_t given_len = mp_obj_get_int(args[2]); - if (given_len < len) { + if (given_len > 0 && given_len < len) { len = given_len; } } diff --git a/shared-bindings/time/__init__.c b/shared-bindings/time/__init__.c index 0a78b377c..44f82c62e 100644 --- a/shared-bindings/time/__init__.c +++ b/shared-bindings/time/__init__.c @@ -215,7 +215,7 @@ STATIC mp_obj_t time_time(void) { MP_DEFINE_CONST_FUN_OBJ_0(time_time_obj, time_time); //| def monotonic_ns() -> int: -//| """Return the time of the specified clock clk_id in nanoseconds. +//| """Return the time of the monotonic clock, cannot go backward, in nanoseconds. //| //| :return: the current time //| :rtype: int""" diff --git a/shared-module/board/__init__.c b/shared-module/board/__init__.c index 265c6517f..7d99f2d4e 100644 --- a/shared-module/board/__init__.c +++ b/shared-module/board/__init__.c @@ -166,6 +166,8 @@ void reset_board_busses(void) { #endif } #endif + // make sure SPI lock is not held over a soft reset + common_hal_busio_spi_unlock(&spi_obj); if (!display_using_spi) { spi_singleton = NULL; } diff --git a/shared-module/displayio/Shape.c b/shared-module/displayio/Shape.c index ab9ca735b..b94a392bc 100644 --- a/shared-module/displayio/Shape.c +++ b/shared-module/displayio/Shape.c @@ -29,6 +29,7 @@ #include <string.h> #include "py/runtime.h" +#include "py/misc.h" void common_hal_displayio_shape_construct(displayio_shape_t *self, uint32_t width, uint32_t height, bool mirror_x, bool mirror_y) { @@ -37,37 +38,77 @@ void common_hal_displayio_shape_construct(displayio_shape_t *self, uint32_t widt self->width = width; if (self->mirror_x) { width /= 2; - width += self->width % 2 - 1; + width += self->width % 2; } self->half_width = width; self->height = height; if (self->mirror_y) { height /= 2; - height += self->height % 2 - 1; + height += self->height % 2; } self->half_height = height; self->data = m_malloc(height * sizeof(uint32_t), false); - for (uint16_t i = 0; i <= height; i++) { + + for (uint16_t i = 0; i < height; i++) { self->data[2 * i] = 0; self->data[2 * i + 1] = width; } + + self->dirty_area.x1=0; + self->dirty_area.x2=width; + self->dirty_area.y1=0; + self->dirty_area.y2=height; } void common_hal_displayio_shape_set_boundary(displayio_shape_t *self, uint16_t y, uint16_t start_x, uint16_t end_x) { - if (y < 0 || y >= self->height || (self->mirror_y && y > self->half_height)) { + if (y < 0 || y >= self->height || (self->mirror_y && y >= self->half_height)) { mp_raise_ValueError(translate("y value out of bounds")); } - if (start_x < 0 || start_x > self->width || end_x < 0 || end_x > self->width) { + if (start_x < 0 || start_x >= self->width || end_x < 0 || end_x >= self->width) { mp_raise_ValueError(translate("x value out of bounds")); } - uint16_t half_width = self->width / 2 - 1 + self->width % 2; - if (self->mirror_x && (start_x > half_width || end_x > half_width)) { - mp_raise_ValueError_varg(translate("Maximum x value when mirrored is %d"), half_width); + if (self->mirror_x && (start_x >= self->half_width || end_x >= self->half_width)) { + mp_raise_ValueError_varg(translate("Maximum x value when mirrored is %d"), self->half_width); + } + + uint16_t lower_x, upper_x, lower_y, upper_y; + + // find x-boundaries for updating based on current data and start_x, end_x, and mirror_x + lower_x = MIN(start_x, self->data[2 * y]); + + if (self->mirror_x) { + upper_x = self->width - lower_x + 1; // dirty rectangles are treated with max value exclusive + } else { + upper_x = MAX(end_x, self->data[2 * y + 1]) + 1; // dirty rectangles are treated with max value exclusive + } + + // find y-boundaries based on y and mirror_y + lower_y = y; + + if (self->mirror_y) { + upper_y = self->height - lower_y + 1; // dirty rectangles are treated with max value exclusive + } else { + upper_y = y + 1; // dirty rectangles are treated with max value exclusive } - self->data[2 * y] = start_x; + + self->data[2 * y] = start_x; // update the data array with the new boundaries self->data[2 * y + 1] = end_x; + + if (self->dirty_area.x1 == self->dirty_area.x2) { // Dirty region is empty + self->dirty_area.x1 = lower_x; + self->dirty_area.x2 = upper_x; + self->dirty_area.y1 = lower_y; + self->dirty_area.y2 = upper_y; + + } else { // Dirty region is not empty + self->dirty_area.x1 = MIN(lower_x, self->dirty_area.x1); + self->dirty_area.x2 = MAX(upper_x, self->dirty_area.x2); + + self->dirty_area.y1 = MIN(lower_y, self->dirty_area.y1); + self->dirty_area.y2 = MAX(upper_y, self->dirty_area.y2); + } } uint32_t common_hal_displayio_shape_get_pixel(void *obj, int16_t x, int16_t y) { @@ -75,10 +116,10 @@ uint32_t common_hal_displayio_shape_get_pixel(void *obj, int16_t x, int16_t y) { if (x >= self->width || x < 0 || y >= self->height || y < 0) { return 0; } - if (self->mirror_x && x > self->half_width) { - x = self->width - 1 - x; + if (self->mirror_x && x >= self->half_width) { + x = self->width - x - 1; } - if (self->mirror_y && y > self->half_height) { + if (self->mirror_y && y >= self->half_height) { y = self->height - y - 1; } uint16_t start_x = self->data[2 * y]; @@ -88,3 +129,16 @@ uint32_t common_hal_displayio_shape_get_pixel(void *obj, int16_t x, int16_t y) { } return 1; } + +displayio_area_t* displayio_shape_get_refresh_areas(displayio_shape_t *self, displayio_area_t* tail) { + if (self->dirty_area.x1 == self->dirty_area.x2) { + return tail; + } + self->dirty_area.next = tail; + return &self->dirty_area; +} + +void displayio_shape_finish_refresh(displayio_shape_t *self) { + self->dirty_area.x1 = 0; + self->dirty_area.x2 = 0; +} diff --git a/shared-module/displayio/Shape.h b/shared-module/displayio/Shape.h index ca054fe00..e59ad586e 100644 --- a/shared-module/displayio/Shape.h +++ b/shared-module/displayio/Shape.h @@ -31,6 +31,7 @@ #include <stdint.h> #include "py/obj.h" +#include "shared-module/displayio/area.h" typedef struct { mp_obj_base_t base; @@ -41,6 +42,10 @@ typedef struct { uint16_t* data; bool mirror_x; bool mirror_y; + displayio_area_t dirty_area; } displayio_shape_t; +void displayio_shape_finish_refresh(displayio_shape_t *self); +displayio_area_t* displayio_shape_get_refresh_areas(displayio_shape_t *self, displayio_area_t* tail); + #endif // MICROPY_INCLUDED_SHARED_MODULE_DISPLAYIO_SHAPE_H diff --git a/shared-module/displayio/TileGrid.c b/shared-module/displayio/TileGrid.c index 2766cbecd..e3642107f 100644 --- a/shared-module/displayio/TileGrid.c +++ b/shared-module/displayio/TileGrid.c @@ -499,7 +499,7 @@ void displayio_tilegrid_finish_refresh(displayio_tilegrid_t *self) { if (MP_OBJ_IS_TYPE(self->bitmap, &displayio_bitmap_type)) { displayio_bitmap_finish_refresh(self->bitmap); } else if (MP_OBJ_IS_TYPE(self->bitmap, &displayio_shape_type)) { - // TODO: Support shape changes. + displayio_shape_finish_refresh(self->bitmap); } else if (MP_OBJ_IS_TYPE(self->bitmap, &displayio_ondiskbitmap_type)) { // OnDiskBitmap changes will trigger a complete reload so no need to // track changes. @@ -543,6 +543,12 @@ displayio_area_t* displayio_tilegrid_get_refresh_areas(displayio_tilegrid_t *sel self->full_change = true; } } + } else if (MP_OBJ_IS_TYPE(self->bitmap, &displayio_shape_type)) { + displayio_area_t* refresh_area = displayio_shape_get_refresh_areas(self->bitmap, tail); + if (refresh_area != tail) { + displayio_area_copy(refresh_area, &self->dirty_area); + self->partial_change = true; + } } self->full_change = self->full_change || diff --git a/supervisor/shared/safe_mode.c b/supervisor/shared/safe_mode.c index 29a0a6a4f..1cf36e4b7 100644 --- a/supervisor/shared/safe_mode.c +++ b/supervisor/shared/safe_mode.c @@ -60,6 +60,11 @@ safe_mode_t wait_for_safe_mode_reset(void) { common_hal_digitalio_digitalinout_construct(&status_led, MICROPY_HW_LED_STATUS); common_hal_digitalio_digitalinout_switch_to_output(&status_led, true, DRIVE_MODE_PUSH_PULL); #endif + #ifdef CIRCUITPY_BOOT_BUTTON + digitalio_digitalinout_obj_t boot_button; + common_hal_digitalio_digitalinout_construct(&boot_button, CIRCUITPY_BOOT_BUTTON); + common_hal_digitalio_digitalinout_switch_to_input(&boot_button, PULL_UP); + #endif uint64_t start_ticks = supervisor_ticks_ms64(); uint64_t diff = 0; while (diff < 700) { @@ -67,6 +72,11 @@ safe_mode_t wait_for_safe_mode_reset(void) { // Blink on for 100, off for 100, on for 100, off for 100 and on for 200 common_hal_digitalio_digitalinout_set_value(&status_led, diff > 100 && diff / 100 != 2 && diff / 100 != 4); #endif + #ifdef CIRCUITPY_BOOT_BUTTON + if (!common_hal_digitalio_digitalinout_get_value(&boot_button)) { + return USER_SAFE_MODE; + } + #endif diff = supervisor_ticks_ms64() - start_ticks; } #ifdef MICROPY_HW_LED_STATUS @@ -103,77 +113,79 @@ void print_safe_mode_message(safe_mode_t reason) { return; } serial_write("\n"); - // Output a user safe mode string if it's set. - #ifdef BOARD_USER_SAFE_MODE - if (reason == USER_SAFE_MODE) { - serial_write_compressed(translate("You requested starting safe mode by ")); - serial_write(BOARD_USER_SAFE_MODE_ACTION); - serial_write_compressed(translate("\nTo exit, please reset the board without ")); - serial_write(BOARD_USER_SAFE_MODE_ACTION); - serial_write("\n"); - } else - #endif - switch (reason) { - case MANUAL_SAFE_MODE: - serial_write_compressed(translate("CircuitPython is in safe mode because you pressed the reset button during boot. Press again to exit safe mode.\n")); - return; - case PROGRAMMATIC_SAFE_MODE: - serial_write_compressed(translate("The `microcontroller` module was used to boot into safe mode. Press reset to exit safe mode.\n")); - return; - default: - break; - } - serial_write_compressed(translate("You are in safe mode: something unanticipated happened.\n")); - switch (reason) { - case BROWNOUT: - serial_write_compressed(translate("The microcontroller's power dipped. Make sure your power supply provides\nenough power for the whole circuit and press reset (after ejecting CIRCUITPY).\n")); - return; - case HEAP_OVERWRITTEN: - serial_write_compressed(translate("The CircuitPython heap was corrupted because the stack was too small.\nPlease increase the stack size if you know how, or if not:")); - serial_write_compressed(FILE_AN_ISSUE); - return; - case NO_HEAP: - serial_write_compressed(translate("CircuitPython was unable to allocate the heap.\n")); - serial_write_compressed(FILE_AN_ISSUE); - return; - default: + switch (reason) { + case USER_SAFE_MODE: + #ifdef BOARD_USER_SAFE_MODE_ACTION + // Output a user safe mode string if it's set. + serial_write_compressed(translate("You requested starting safe mode by ")); + serial_write_compressed(translate(BOARD_USER_SAFE_MODE_ACTION)); + serial_write_compressed(translate("To exit, please reset the board without ")); + serial_write_compressed(translate(BOARD_USER_SAFE_MODE_ACTION)); + #else break; - } + #endif + return; + case MANUAL_SAFE_MODE: + serial_write_compressed(translate("CircuitPython is in safe mode because you pressed the reset button during boot. Press again to exit safe mode.\n")); + return; + case PROGRAMMATIC_SAFE_MODE: + serial_write_compressed(translate("The `microcontroller` module was used to boot into safe mode. Press reset to exit safe mode.\n")); + return; + default: + break; + } - serial_write_compressed(translate("CircuitPython core code crashed hard. Whoops!\n")); - switch (reason) { - case HARD_CRASH: - serial_write_compressed(translate("Crash into the HardFault_Handler.")); - return; - case MICROPY_NLR_JUMP_FAIL: - serial_write_compressed(translate("MicroPython NLR jump failed. Likely memory corruption.")); - return; - case MICROPY_FATAL_ERROR: - serial_write_compressed(translate("MicroPython fatal error.")); - break; - case GC_ALLOC_OUTSIDE_VM: - serial_write_compressed(translate("Attempted heap allocation when MicroPython VM not running.")); - break; -#ifdef SOFTDEVICE_PRESENT - // defined in ports/nrf/bluetooth/bluetooth_common.mk - // will print "Unknown reason" if somehow encountered on other ports - case NORDIC_SOFT_DEVICE_ASSERT: - serial_write_compressed(translate("Nordic Soft Device failure assertion.")); - break; -#endif - case FLASH_WRITE_FAIL: - serial_write_compressed(translate("Failed to write internal flash.")); - break; - case MEM_MANAGE: - serial_write_compressed(translate("Invalid memory access.")); - break; - case WATCHDOG_RESET: - serial_write_compressed(translate("Watchdog timer expired.")); - break; - default: - serial_write_compressed(translate("Unknown reason.")); - break; - } - serial_write_compressed(FILE_AN_ISSUE); + serial_write_compressed(translate("You are in safe mode: something unanticipated happened.\n")); + switch (reason) { + case BROWNOUT: + serial_write_compressed(translate("The microcontroller's power dipped. Make sure your power supply provides\nenough power for the whole circuit and press reset (after ejecting CIRCUITPY).\n")); + return; + case HEAP_OVERWRITTEN: + serial_write_compressed(translate("The CircuitPython heap was corrupted because the stack was too small.\nPlease increase the stack size if you know how, or if not:")); + serial_write_compressed(FILE_AN_ISSUE); + return; + case NO_HEAP: + serial_write_compressed(translate("CircuitPython was unable to allocate the heap.\n")); + serial_write_compressed(FILE_AN_ISSUE); + return; + default: + break; + } + + serial_write_compressed(translate("CircuitPython core code crashed hard. Whoops!\n")); + switch (reason) { + case HARD_CRASH: + serial_write_compressed(translate("Crash into the HardFault_Handler.")); + return; + case MICROPY_NLR_JUMP_FAIL: + serial_write_compressed(translate("MicroPython NLR jump failed. Likely memory corruption.")); + return; + case MICROPY_FATAL_ERROR: + serial_write_compressed(translate("MicroPython fatal error.")); + break; + case GC_ALLOC_OUTSIDE_VM: + serial_write_compressed(translate("Attempted heap allocation when MicroPython VM not running.")); + break; + #ifdef SOFTDEVICE_PRESENT + // defined in ports/nrf/bluetooth/bluetooth_common.mk + // will print "Unknown reason" if somehow encountered on other ports + case NORDIC_SOFT_DEVICE_ASSERT: + serial_write_compressed(translate("Nordic Soft Device failure assertion.")); + break; + #endif + case FLASH_WRITE_FAIL: + serial_write_compressed(translate("Failed to write internal flash.")); + break; + case MEM_MANAGE: + serial_write_compressed(translate("Invalid memory access.")); + break; + case WATCHDOG_RESET: + serial_write_compressed(translate("Watchdog timer expired.")); + break; + default: + serial_write_compressed(translate("Unknown reason.")); + break; + } + serial_write_compressed(FILE_AN_ISSUE); } diff --git a/tests/basics/struct1.py b/tests/basics/struct1.py index db34342a1..107006cc3 100644 --- a/tests/basics/struct1.py +++ b/tests/basics/struct1.py @@ -39,6 +39,28 @@ print(v == (10, 100, 200, 300)) # network byte order print(struct.pack('!i', 123)) +# too short / too long arguments +buf = bytearray(b'>>>123<<<') +try: + struct.pack_into('bb', buf, 0, 3) +except: + print('struct.error') + +try: + struct.pack_into('bb', buf, 0, 3, 1, 4) +except: + print('struct.error') + +try: + struct.pack('bb', 3) +except: + print('struct.error') + +try: + struct.pack('bb', 3, 1, 4) +except: + print('struct.error') + # check that we get an error if the buffer is too small try: struct.unpack('I', b'\x00\x00\x00') @@ -96,3 +118,6 @@ try: print(struct.unpack_from('<b', buf, -11)) except: print('struct.error') + +# check padding bytes +print(struct.pack("xb", 3)) diff --git a/tests/basics/struct_micropython.py b/tests/basics/struct_micropython.py deleted file mode 100644 index e72153071..000000000 --- a/tests/basics/struct_micropython.py +++ /dev/null @@ -1,41 +0,0 @@ -# test MicroPython-specific features of struct - -try: - import ustruct as struct -except: - try: - import struct - except ImportError: - print("SKIP") - raise SystemExit - -try: - struct.pack('O', None) -except ValueError: - print("SKIP") - raise SystemExit - -class A(): - pass - -# pack and unpack objects -o = A() -s = struct.pack("<O", o) -o2 = struct.unpack("<O", s) -print(o is o2[0]) - -# pack can accept less arguments than required for the format spec -print(struct.pack('<2I', 1)) - -# pack and unpack pointer to a string -# This requires uctypes to get the address of the string and instead of -# putting this in a dedicated test that can be skipped we simply pass -# if the import fails. -try: - import uctypes - o = uctypes.addressof('abc') - s = struct.pack("<S", o) - o2 = struct.unpack("<S", s) - assert o2[0] == 'abc' -except ImportError: - pass diff --git a/tests/basics/struct_micropython.py.exp b/tests/basics/struct_micropython.py.exp deleted file mode 100644 index 55b7b6623..000000000 --- a/tests/basics/struct_micropython.py.exp +++ /dev/null @@ -1,2 +0,0 @@ -True -b'\x01\x00\x00\x00\x00\x00\x00\x00' diff --git a/tests/misc/non_compliant.py b/tests/misc/non_compliant.py index 99633416a..9a746a8b0 100644 --- a/tests/misc/non_compliant.py +++ b/tests/misc/non_compliant.py @@ -105,12 +105,6 @@ try: except NotImplementedError: print('NotImplementedError') -# struct pack with too many args, not checked by uPy -print(struct.pack('bb', 1, 2, 3)) - -# struct pack with too few args, not checked by uPy -print(struct.pack('bb', 1)) - # array slice assignment with unsupported RHS try: bytearray(4)[0:1] = [1, 2] diff --git a/tests/misc/non_compliant.py.exp b/tests/misc/non_compliant.py.exp index 3f15a1440..8518828ec 100644 --- a/tests/misc/non_compliant.py.exp +++ b/tests/misc/non_compliant.py.exp @@ -14,8 +14,6 @@ NotImplementedError NotImplementedError NotImplementedError NotImplementedError -b'\x01\x02' -b'\x01\x00' NotImplementedError AttributeError TypeError |