diff options
| -rw-r--r-- | ports/atmel-samd/boards/pybadge/board.c | 105 | ||||
| -rw-r--r-- | ports/atmel-samd/boards/pybadge/mpconfigboard.h | 37 | ||||
| -rw-r--r-- | ports/atmel-samd/boards/pybadge/mpconfigboard.mk | 18 | ||||
| -rw-r--r-- | ports/atmel-samd/boards/pybadge/pins.c | 42 |
4 files changed, 202 insertions, 0 deletions
diff --git a/ports/atmel-samd/boards/pybadge/board.c b/ports/atmel-samd/boards/pybadge/board.c new file mode 100644 index 000000000..6b6a65cbb --- /dev/null +++ b/ports/atmel-samd/boards/pybadge/board.c @@ -0,0 +1,105 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" +#include "mpconfigboard.h" +#include "hal/include/hal_gpio.h" +#include "shared-bindings/displayio/FourWire.h" +#include "shared-module/displayio/__init__.h" +#include "shared-module/displayio/mipi_constants.h" +#include "tick.h" + +displayio_fourwire_obj_t board_display_obj; + +#define DELAY 0x80 + +uint8_t display_init_sequence[] = { + 0x01, 0 | DELAY, 150, // SWRESET + 0x11, 0 | DELAY, 255, // SLPOUT + 0xb1, 3, 0x01, 0x2C, 0x2D, // _FRMCTR1 + 0xb2, 3, 0x01, 0x2C, 0x2D, // + 0xb3, 6, 0x01, 0x2C, 0x2D, 0x01, 0x2C, 0x2D, + 0xb4, 1, 0x07, // _INVCTR line inversion + 0xc0, 3, 0xa2, 0x02, 0x84, // _PWCTR1 GVDD = 4.7V, 1.0uA + 0xc1, 1, 0xc5, // _PWCTR2 VGH=14.7V, VGL=-7.35V + 0xc2, 2, 0x0a, 0x00, // _PWCTR3 Opamp current small, Boost frequency + 0xc3, 2, 0x8a, 0x2a, + 0xc4, 2, 0x8a, 0xee, + 0xc5, 1, 0x0e, // _VMCTR1 VCOMH = 4V, VOML = -1.1V + 0x2a, 0, // _INVOFF + 0x36, 1, 0x18, // _MADCTL bottom to top refresh + // 1 clk cycle nonoverlap, 2 cycle gate rise, 3 sycle osc equalie, + // fix on VTL + 0x3a, 1, 0x05, // COLMOD - 16bit color + 0xe0, 16, 0x02, 0x1c, 0x07, 0x12, // _GMCTRP1 Gamma + 0x37, 0x32, 0x29, 0x2d, + 0x29, 0x25, 0x2B, 0x39, + 0x00, 0x01, 0x03, 0x10, + 0xe1, 16, 0x03, 0x1d, 0x07, 0x06, // _GMCTRN1 + 0x2E, 0x2C, 0x29, 0x2D, + 0x2E, 0x2E, 0x37, 0x3F, + 0x00, 0x00, 0x02, 0x10, + 0x2a, 3, 0x02, 0x00, 0x81, // _CASET XSTART = 2, XEND = 129 + 0x2b, 3, 0x02, 0x00, 0x81, // _RASET XSTART = 2, XEND = 129 + 0x13, 0 | DELAY, 10, // _NORON + 0x29, 0 | DELAY, 100, // _DISPON +}; + +void board_init(void) { + displayio_fourwire_obj_t* bus = &displays[0].fourwire_bus; + bus->base.type = &displayio_fourwire_type; + common_hal_displayio_fourwire_construct(bus, + board_spi(), + &pin_PB05, // TFT_DC Command or data + &pin_PB07, // TFT_CS Chip select + &pin_PA01); // TFT_RST Reset + + displayio_display_obj_t* display = &displays[0].display; + display->base.type = &displayio_display_type; + common_hal_displayio_display_construct(display, + bus, + 128, // Width + 128, // Height + 2, // column start + 1, // row start + 0, // rotation + 16, // Color depth + MIPI_COMMAND_SET_COLUMN_ADDRESS, // Set column command + MIPI_COMMAND_SET_PAGE_ADDRESS, // Set row command + MIPI_COMMAND_WRITE_MEMORY_START, // Write memory command + 0x37, // set vertical scroll command + display_init_sequence, + sizeof(display_init_sequence), + &pin_PA00); + common_hal_displayio_display_set_auto_brightness(display, true); +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { +} diff --git a/ports/atmel-samd/boards/pybadge/mpconfigboard.h b/ports/atmel-samd/boards/pybadge/mpconfigboard.h new file mode 100644 index 000000000..a72859fb0 --- /dev/null +++ b/ports/atmel-samd/boards/pybadge/mpconfigboard.h @@ -0,0 +1,37 @@ +#define MICROPY_HW_BOARD_NAME "Adafruit Pybadge" +#define MICROPY_HW_MCU_NAME "samd51j19" + +#define CIRCUITPY_MCU_FAMILY samd51 + +// This is for Rev B +#define MICROPY_HW_LED_STATUS (&pin_PA22) + +// These are pins not to reset. +// QSPI Data pins +#define MICROPY_PORT_A (PORT_PA08 | PORT_PA09 | PORT_PA10 | PORT_PA11) +// DotStar pins, QSPI CS, and QSPI SCK +#define MICROPY_PORT_B (PORT_PB10 | PORT_PB11) +#define MICROPY_PORT_C (0) +#define MICROPY_PORT_D (0) + +#define AUTORESET_DELAY_MS 500 + +// If you change this, then make sure to update the linker scripts as well to +// make sure you don't overwrite code +#define CIRCUITPY_INTERNAL_NVM_SIZE 8192 + +#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE) + +#define DEFAULT_I2C_BUS_SCL (&pin_PA13) +#define DEFAULT_I2C_BUS_SDA (&pin_PA12) + +#define DEFAULT_SPI_BUS_SCK (&pin_PA17) +#define DEFAULT_SPI_BUS_MOSI (&pin_PB23) +#define DEFAULT_SPI_BUS_MISO (&pin_PB22) + +#define DEFAULT_UART_BUS_RX (&pin_PB17) +#define DEFAULT_UART_BUS_TX (&pin_PB16) + +// USB is always used internally so skip the pin objects for it. +#define IGNORE_PIN_PA24 1 +#define IGNORE_PIN_PA25 1 diff --git a/ports/atmel-samd/boards/pybadge/mpconfigboard.mk b/ports/atmel-samd/boards/pybadge/mpconfigboard.mk new file mode 100644 index 000000000..f4e8c977f --- /dev/null +++ b/ports/atmel-samd/boards/pybadge/mpconfigboard.mk @@ -0,0 +1,18 @@ +LD_FILE = boards/samd51x19-bootloader-external-flash.ld +USB_VID = 0x239A +USB_PID = 0x802C +USB_PRODUCT = "Pybadge" +USB_MANUFACTURER = "Adafruit Industries LLC" + +QSPI_FLASH_FILESYSTEM = 1 +EXTERNAL_FLASH_DEVICE_COUNT = 1 +EXTERNAL_FLASH_DEVICES = GD25Q64C +LONGINT_IMPL = MPZ + +# No I2S on SAMD51G +CIRCUITPY_AUDIOBUSIO = 0 +# No touch on SAMD51 yet +CIRCUITPY_TOUCHIO = 0 + +CHIP_VARIANT = SAMD51J19A +CHIP_FAMILY = samd51 diff --git a/ports/atmel-samd/boards/pybadge/pins.c b/ports/atmel-samd/boards/pybadge/pins.c new file mode 100644 index 000000000..41ab634c9 --- /dev/null +++ b/ports/atmel-samd/boards/pybadge/pins.c @@ -0,0 +1,42 @@ +#include "shared-bindings/board/__init__.h" + +#include "boards/board.h" +#include "supervisor/shared/board_busses.h" +#include "shared-module/displayio/__init__.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + { MP_OBJ_NEW_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PB08) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PB09) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA04) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PA06) }, + + { MP_OBJ_NEW_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_PA16) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_PA18) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_PA19) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA20) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA21) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_PA22) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA23) }, + + { MP_OBJ_NEW_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA15) }, + + { MP_OBJ_NEW_QSTR(MP_QSTR_AVCC), MP_ROM_PTR(&pin_PA03) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_LEFT_DAC), MP_ROM_PTR(&pin_PA02) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_RIGHT_DAC), MP_ROM_PTR(&pin_PA05) }, + + { MP_OBJ_NEW_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA17) }, + + { MP_OBJ_NEW_QSTR(MP_QSTR_TFT_LITE), MP_ROM_PTR(&pin_PA00) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_TFT_MOSI), MP_ROM_PTR(&pin_PA12) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_TFT_SCK), MP_ROM_PTR(&pin_PA13) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_TFT_RST), MP_ROM_PTR(&pin_PA01) }, + { MP_ROM_QSTR(MP_QSTR_TFT_CS), MP_ROM_PTR(&pin_PB07) }, + { MP_ROM_QSTR(MP_QSTR_TFT_DC), MP_ROM_PTR(&pin_PB05) }, + + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, + { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, + { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, + + { MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].display)} +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); |