diff options
Diffstat (limited to 'atmel-samd/asf4/samd21/include/instance/sercom0.h')
| -rw-r--r-- | atmel-samd/asf4/samd21/include/instance/sercom0.h | 128 |
1 files changed, 128 insertions, 0 deletions
diff --git a/atmel-samd/asf4/samd21/include/instance/sercom0.h b/atmel-samd/asf4/samd21/include/instance/sercom0.h new file mode 100644 index 000000000..b7065f8d3 --- /dev/null +++ b/atmel-samd/asf4/samd21/include/instance/sercom0.h @@ -0,0 +1,128 @@ +/** + * \file + * + * \brief Instance description for SERCOM0 + * + * Copyright (c) 2016 Atmel Corporation, + * a wholly owned subsidiary of Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + +#ifndef _SAMD21_SERCOM0_INSTANCE_ +#define _SAMD21_SERCOM0_INSTANCE_ + +/* ========== Register definition for SERCOM0 peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_SERCOM0_I2CM_CTRLA (0x42000800) /**< \brief (SERCOM0) I2CM Control A */ +#define REG_SERCOM0_I2CM_CTRLB (0x42000804) /**< \brief (SERCOM0) I2CM Control B */ +#define REG_SERCOM0_I2CM_BAUD (0x4200080C) /**< \brief (SERCOM0) I2CM Baud Rate */ +#define REG_SERCOM0_I2CM_INTENCLR (0x42000814) /**< \brief (SERCOM0) I2CM Interrupt Enable Clear */ +#define REG_SERCOM0_I2CM_INTENSET (0x42000816) /**< \brief (SERCOM0) I2CM Interrupt Enable Set */ +#define REG_SERCOM0_I2CM_INTFLAG (0x42000818) /**< \brief (SERCOM0) I2CM Interrupt Flag Status and Clear */ +#define REG_SERCOM0_I2CM_STATUS (0x4200081A) /**< \brief (SERCOM0) I2CM Status */ +#define REG_SERCOM0_I2CM_SYNCBUSY (0x4200081C) /**< \brief (SERCOM0) I2CM Syncbusy */ +#define REG_SERCOM0_I2CM_ADDR (0x42000824) /**< \brief (SERCOM0) I2CM Address */ +#define REG_SERCOM0_I2CM_DATA (0x42000828) /**< \brief (SERCOM0) I2CM Data */ +#define REG_SERCOM0_I2CM_DBGCTRL (0x42000830) /**< \brief (SERCOM0) I2CM Debug Control */ +#define REG_SERCOM0_I2CS_CTRLA (0x42000800) /**< \brief (SERCOM0) I2CS Control A */ +#define REG_SERCOM0_I2CS_CTRLB (0x42000804) /**< \brief (SERCOM0) I2CS Control B */ +#define REG_SERCOM0_I2CS_INTENCLR (0x42000814) /**< \brief (SERCOM0) I2CS Interrupt Enable Clear */ +#define REG_SERCOM0_I2CS_INTENSET (0x42000816) /**< \brief (SERCOM0) I2CS Interrupt Enable Set */ +#define REG_SERCOM0_I2CS_INTFLAG (0x42000818) /**< \brief (SERCOM0) I2CS Interrupt Flag Status and Clear */ +#define REG_SERCOM0_I2CS_STATUS (0x4200081A) /**< \brief (SERCOM0) I2CS Status */ +#define REG_SERCOM0_I2CS_SYNCBUSY (0x4200081C) /**< \brief (SERCOM0) I2CS Syncbusy */ +#define REG_SERCOM0_I2CS_ADDR (0x42000824) /**< \brief (SERCOM0) I2CS Address */ +#define REG_SERCOM0_I2CS_DATA (0x42000828) /**< \brief (SERCOM0) I2CS Data */ +#define REG_SERCOM0_SPI_CTRLA (0x42000800) /**< \brief (SERCOM0) SPI Control A */ +#define REG_SERCOM0_SPI_CTRLB (0x42000804) /**< \brief (SERCOM0) SPI Control B */ +#define REG_SERCOM0_SPI_BAUD (0x4200080C) /**< \brief (SERCOM0) SPI Baud Rate */ +#define REG_SERCOM0_SPI_INTENCLR (0x42000814) /**< \brief (SERCOM0) SPI Interrupt Enable Clear */ +#define REG_SERCOM0_SPI_INTENSET (0x42000816) /**< \brief (SERCOM0) SPI Interrupt Enable Set */ +#define REG_SERCOM0_SPI_INTFLAG (0x42000818) /**< \brief (SERCOM0) SPI Interrupt Flag Status and Clear */ +#define REG_SERCOM0_SPI_STATUS (0x4200081A) /**< \brief (SERCOM0) SPI Status */ +#define REG_SERCOM0_SPI_SYNCBUSY (0x4200081C) /**< \brief (SERCOM0) SPI Syncbusy */ +#define REG_SERCOM0_SPI_ADDR (0x42000824) /**< \brief (SERCOM0) SPI Address */ +#define REG_SERCOM0_SPI_DATA (0x42000828) /**< \brief (SERCOM0) SPI Data */ +#define REG_SERCOM0_SPI_DBGCTRL (0x42000830) /**< \brief (SERCOM0) SPI Debug Control */ +#define REG_SERCOM0_USART_CTRLA (0x42000800) /**< \brief (SERCOM0) USART Control A */ +#define REG_SERCOM0_USART_CTRLB (0x42000804) /**< \brief (SERCOM0) USART Control B */ +#define REG_SERCOM0_USART_BAUD (0x4200080C) /**< \brief (SERCOM0) USART Baud Rate */ +#define REG_SERCOM0_USART_RXPL (0x4200080E) /**< \brief (SERCOM0) USART Receive Pulse Length */ +#define REG_SERCOM0_USART_INTENCLR (0x42000814) /**< \brief (SERCOM0) USART Interrupt Enable Clear */ +#define REG_SERCOM0_USART_INTENSET (0x42000816) /**< \brief (SERCOM0) USART Interrupt Enable Set */ +#define REG_SERCOM0_USART_INTFLAG (0x42000818) /**< \brief (SERCOM0) USART Interrupt Flag Status and Clear */ +#define REG_SERCOM0_USART_STATUS (0x4200081A) /**< \brief (SERCOM0) USART Status */ +#define REG_SERCOM0_USART_SYNCBUSY (0x4200081C) /**< \brief (SERCOM0) USART Syncbusy */ +#define REG_SERCOM0_USART_DATA (0x42000828) /**< \brief (SERCOM0) USART Data */ +#define REG_SERCOM0_USART_DBGCTRL (0x42000830) /**< \brief (SERCOM0) USART Debug Control */ +#else +#define REG_SERCOM0_I2CM_CTRLA (*(RwReg *)0x42000800UL) /**< \brief (SERCOM0) I2CM Control A */ +#define REG_SERCOM0_I2CM_CTRLB (*(RwReg *)0x42000804UL) /**< \brief (SERCOM0) I2CM Control B */ +#define REG_SERCOM0_I2CM_BAUD (*(RwReg *)0x4200080CUL) /**< \brief (SERCOM0) I2CM Baud Rate */ +#define REG_SERCOM0_I2CM_INTENCLR (*(RwReg8 *)0x42000814UL) /**< \brief (SERCOM0) I2CM Interrupt Enable Clear */ +#define REG_SERCOM0_I2CM_INTENSET (*(RwReg8 *)0x42000816UL) /**< \brief (SERCOM0) I2CM Interrupt Enable Set */ +#define REG_SERCOM0_I2CM_INTFLAG (*(RwReg8 *)0x42000818UL) /**< \brief (SERCOM0) I2CM Interrupt Flag Status and Clear */ +#define REG_SERCOM0_I2CM_STATUS (*(RwReg16*)0x4200081AUL) /**< \brief (SERCOM0) I2CM Status */ +#define REG_SERCOM0_I2CM_SYNCBUSY (*(RoReg *)0x4200081CUL) /**< \brief (SERCOM0) I2CM Syncbusy */ +#define REG_SERCOM0_I2CM_ADDR (*(RwReg *)0x42000824UL) /**< \brief (SERCOM0) I2CM Address */ +#define REG_SERCOM0_I2CM_DATA (*(RwReg8 *)0x42000828UL) /**< \brief (SERCOM0) I2CM Data */ +#define REG_SERCOM0_I2CM_DBGCTRL (*(RwReg8 *)0x42000830UL) /**< \brief (SERCOM0) I2CM Debug Control */ +#define REG_SERCOM0_I2CS_CTRLA (*(RwReg *)0x42000800UL) /**< \brief (SERCOM0) I2CS Control A */ +#define REG_SERCOM0_I2CS_CTRLB (*(RwReg *)0x42000804UL) /**< \brief (SERCOM0) I2CS Control B */ +#define REG_SERCOM0_I2CS_INTENCLR (*(RwReg8 *)0x42000814UL) /**< \brief (SERCOM0) I2CS Interrupt Enable Clear */ +#define REG_SERCOM0_I2CS_INTENSET (*(RwReg8 *)0x42000816UL) /**< \brief (SERCOM0) I2CS Interrupt Enable Set */ +#define REG_SERCOM0_I2CS_INTFLAG (*(RwReg8 *)0x42000818UL) /**< \brief (SERCOM0) I2CS Interrupt Flag Status and Clear */ +#define REG_SERCOM0_I2CS_STATUS (*(RwReg16*)0x4200081AUL) /**< \brief (SERCOM0) I2CS Status */ +#define REG_SERCOM0_I2CS_SYNCBUSY (*(RoReg *)0x4200081CUL) /**< \brief (SERCOM0) I2CS Syncbusy */ +#define REG_SERCOM0_I2CS_ADDR (*(RwReg *)0x42000824UL) /**< \brief (SERCOM0) I2CS Address */ +#define REG_SERCOM0_I2CS_DATA (*(RwReg8 *)0x42000828UL) /**< \brief (SERCOM0) I2CS Data */ +#define REG_SERCOM0_SPI_CTRLA (*(RwReg *)0x42000800UL) /**< \brief (SERCOM0) SPI Control A */ +#define REG_SERCOM0_SPI_CTRLB (*(RwReg *)0x42000804UL) /**< \brief (SERCOM0) SPI Control B */ +#define REG_SERCOM0_SPI_BAUD (*(RwReg8 *)0x4200080CUL) /**< \brief (SERCOM0) SPI Baud Rate */ +#define REG_SERCOM0_SPI_INTENCLR (*(RwReg8 *)0x42000814UL) /**< \brief (SERCOM0) SPI Interrupt Enable Clear */ +#define REG_SERCOM0_SPI_INTENSET (*(RwReg8 *)0x42000816UL) /**< \brief (SERCOM0) SPI Interrupt Enable Set */ +#define REG_SERCOM0_SPI_INTFLAG (*(RwReg8 *)0x42000818UL) /**< \brief (SERCOM0) SPI Interrupt Flag Status and Clear */ +#define REG_SERCOM0_SPI_STATUS (*(RwReg16*)0x4200081AUL) /**< \brief (SERCOM0) SPI Status */ +#define REG_SERCOM0_SPI_SYNCBUSY (*(RoReg *)0x4200081CUL) /**< \brief (SERCOM0) SPI Syncbusy */ +#define REG_SERCOM0_SPI_ADDR (*(RwReg *)0x42000824UL) /**< \brief (SERCOM0) SPI Address */ +#define REG_SERCOM0_SPI_DATA (*(RwReg *)0x42000828UL) /**< \brief (SERCOM0) SPI Data */ +#define REG_SERCOM0_SPI_DBGCTRL (*(RwReg8 *)0x42000830UL) /**< \brief (SERCOM0) SPI Debug Control */ +#define REG_SERCOM0_USART_CTRLA (*(RwReg *)0x42000800UL) /**< \brief (SERCOM0) USART Control A */ +#define REG_SERCOM0_USART_CTRLB (*(RwReg *)0x42000804UL) /**< \brief (SERCOM0) USART Control B */ +#define REG_SERCOM0_USART_BAUD (*(RwReg16*)0x4200080CUL) /**< \brief (SERCOM0) USART Baud Rate */ +#define REG_SERCOM0_USART_RXPL (*(RwReg8 *)0x4200080EUL) /**< \brief (SERCOM0) USART Receive Pulse Length */ +#define REG_SERCOM0_USART_INTENCLR (*(RwReg8 *)0x42000814UL) /**< \brief (SERCOM0) USART Interrupt Enable Clear */ +#define REG_SERCOM0_USART_INTENSET (*(RwReg8 *)0x42000816UL) /**< \brief (SERCOM0) USART Interrupt Enable Set */ +#define REG_SERCOM0_USART_INTFLAG (*(RwReg8 *)0x42000818UL) /**< \brief (SERCOM0) USART Interrupt Flag Status and Clear */ +#define REG_SERCOM0_USART_STATUS (*(RwReg16*)0x4200081AUL) /**< \brief (SERCOM0) USART Status */ +#define REG_SERCOM0_USART_SYNCBUSY (*(RoReg *)0x4200081CUL) /**< \brief (SERCOM0) USART Syncbusy */ +#define REG_SERCOM0_USART_DATA (*(RwReg16*)0x42000828UL) /**< \brief (SERCOM0) USART Data */ +#define REG_SERCOM0_USART_DBGCTRL (*(RwReg8 *)0x42000830UL) /**< \brief (SERCOM0) USART Debug Control */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +/* ========== Instance parameters for SERCOM0 peripheral ========== */ +#define SERCOM0_DMAC_ID_RX 1 // Index of DMA RX trigger +#define SERCOM0_DMAC_ID_TX 2 // Index of DMA TX trigger +#define SERCOM0_GCLK_ID_CORE 20 // Index of Generic Clock for Core +#define SERCOM0_GCLK_ID_SLOW 19 // Index of Generic Clock for SMbus timeout +#define SERCOM0_INT_MSB 6 + +#endif /* _SAMD21_SERCOM0_INSTANCE_ */ |