diff options
Diffstat (limited to 'atmel-samd/asf4/samd21/include/instance/sercom4.h')
| -rw-r--r-- | atmel-samd/asf4/samd21/include/instance/sercom4.h | 128 |
1 files changed, 0 insertions, 128 deletions
diff --git a/atmel-samd/asf4/samd21/include/instance/sercom4.h b/atmel-samd/asf4/samd21/include/instance/sercom4.h deleted file mode 100644 index b51c4626b..000000000 --- a/atmel-samd/asf4/samd21/include/instance/sercom4.h +++ /dev/null @@ -1,128 +0,0 @@ -/** - * \file - * - * \brief Instance description for SERCOM4 - * - * Copyright (c) 2016 Atmel Corporation, - * a wholly owned subsidiary of Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - -#ifndef _SAMD21_SERCOM4_INSTANCE_ -#define _SAMD21_SERCOM4_INSTANCE_ - -/* ========== Register definition for SERCOM4 peripheral ========== */ -#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) -#define REG_SERCOM4_I2CM_CTRLA (0x42001800) /**< \brief (SERCOM4) I2CM Control A */ -#define REG_SERCOM4_I2CM_CTRLB (0x42001804) /**< \brief (SERCOM4) I2CM Control B */ -#define REG_SERCOM4_I2CM_BAUD (0x4200180C) /**< \brief (SERCOM4) I2CM Baud Rate */ -#define REG_SERCOM4_I2CM_INTENCLR (0x42001814) /**< \brief (SERCOM4) I2CM Interrupt Enable Clear */ -#define REG_SERCOM4_I2CM_INTENSET (0x42001816) /**< \brief (SERCOM4) I2CM Interrupt Enable Set */ -#define REG_SERCOM4_I2CM_INTFLAG (0x42001818) /**< \brief (SERCOM4) I2CM Interrupt Flag Status and Clear */ -#define REG_SERCOM4_I2CM_STATUS (0x4200181A) /**< \brief (SERCOM4) I2CM Status */ -#define REG_SERCOM4_I2CM_SYNCBUSY (0x4200181C) /**< \brief (SERCOM4) I2CM Syncbusy */ -#define REG_SERCOM4_I2CM_ADDR (0x42001824) /**< \brief (SERCOM4) I2CM Address */ -#define REG_SERCOM4_I2CM_DATA (0x42001828) /**< \brief (SERCOM4) I2CM Data */ -#define REG_SERCOM4_I2CM_DBGCTRL (0x42001830) /**< \brief (SERCOM4) I2CM Debug Control */ -#define REG_SERCOM4_I2CS_CTRLA (0x42001800) /**< \brief (SERCOM4) I2CS Control A */ -#define REG_SERCOM4_I2CS_CTRLB (0x42001804) /**< \brief (SERCOM4) I2CS Control B */ -#define REG_SERCOM4_I2CS_INTENCLR (0x42001814) /**< \brief (SERCOM4) I2CS Interrupt Enable Clear */ -#define REG_SERCOM4_I2CS_INTENSET (0x42001816) /**< \brief (SERCOM4) I2CS Interrupt Enable Set */ -#define REG_SERCOM4_I2CS_INTFLAG (0x42001818) /**< \brief (SERCOM4) I2CS Interrupt Flag Status and Clear */ -#define REG_SERCOM4_I2CS_STATUS (0x4200181A) /**< \brief (SERCOM4) I2CS Status */ -#define REG_SERCOM4_I2CS_SYNCBUSY (0x4200181C) /**< \brief (SERCOM4) I2CS Syncbusy */ -#define REG_SERCOM4_I2CS_ADDR (0x42001824) /**< \brief (SERCOM4) I2CS Address */ -#define REG_SERCOM4_I2CS_DATA (0x42001828) /**< \brief (SERCOM4) I2CS Data */ -#define REG_SERCOM4_SPI_CTRLA (0x42001800) /**< \brief (SERCOM4) SPI Control A */ -#define REG_SERCOM4_SPI_CTRLB (0x42001804) /**< \brief (SERCOM4) SPI Control B */ -#define REG_SERCOM4_SPI_BAUD (0x4200180C) /**< \brief (SERCOM4) SPI Baud Rate */ -#define REG_SERCOM4_SPI_INTENCLR (0x42001814) /**< \brief (SERCOM4) SPI Interrupt Enable Clear */ -#define REG_SERCOM4_SPI_INTENSET (0x42001816) /**< \brief (SERCOM4) SPI Interrupt Enable Set */ -#define REG_SERCOM4_SPI_INTFLAG (0x42001818) /**< \brief (SERCOM4) SPI Interrupt Flag Status and Clear */ -#define REG_SERCOM4_SPI_STATUS (0x4200181A) /**< \brief (SERCOM4) SPI Status */ -#define REG_SERCOM4_SPI_SYNCBUSY (0x4200181C) /**< \brief (SERCOM4) SPI Syncbusy */ -#define REG_SERCOM4_SPI_ADDR (0x42001824) /**< \brief (SERCOM4) SPI Address */ -#define REG_SERCOM4_SPI_DATA (0x42001828) /**< \brief (SERCOM4) SPI Data */ -#define REG_SERCOM4_SPI_DBGCTRL (0x42001830) /**< \brief (SERCOM4) SPI Debug Control */ -#define REG_SERCOM4_USART_CTRLA (0x42001800) /**< \brief (SERCOM4) USART Control A */ -#define REG_SERCOM4_USART_CTRLB (0x42001804) /**< \brief (SERCOM4) USART Control B */ -#define REG_SERCOM4_USART_BAUD (0x4200180C) /**< \brief (SERCOM4) USART Baud Rate */ -#define REG_SERCOM4_USART_RXPL (0x4200180E) /**< \brief (SERCOM4) USART Receive Pulse Length */ -#define REG_SERCOM4_USART_INTENCLR (0x42001814) /**< \brief (SERCOM4) USART Interrupt Enable Clear */ -#define REG_SERCOM4_USART_INTENSET (0x42001816) /**< \brief (SERCOM4) USART Interrupt Enable Set */ -#define REG_SERCOM4_USART_INTFLAG (0x42001818) /**< \brief (SERCOM4) USART Interrupt Flag Status and Clear */ -#define REG_SERCOM4_USART_STATUS (0x4200181A) /**< \brief (SERCOM4) USART Status */ -#define REG_SERCOM4_USART_SYNCBUSY (0x4200181C) /**< \brief (SERCOM4) USART Syncbusy */ -#define REG_SERCOM4_USART_DATA (0x42001828) /**< \brief (SERCOM4) USART Data */ -#define REG_SERCOM4_USART_DBGCTRL (0x42001830) /**< \brief (SERCOM4) USART Debug Control */ -#else -#define REG_SERCOM4_I2CM_CTRLA (*(RwReg *)0x42001800UL) /**< \brief (SERCOM4) I2CM Control A */ -#define REG_SERCOM4_I2CM_CTRLB (*(RwReg *)0x42001804UL) /**< \brief (SERCOM4) I2CM Control B */ -#define REG_SERCOM4_I2CM_BAUD (*(RwReg *)0x4200180CUL) /**< \brief (SERCOM4) I2CM Baud Rate */ -#define REG_SERCOM4_I2CM_INTENCLR (*(RwReg8 *)0x42001814UL) /**< \brief (SERCOM4) I2CM Interrupt Enable Clear */ -#define REG_SERCOM4_I2CM_INTENSET (*(RwReg8 *)0x42001816UL) /**< \brief (SERCOM4) I2CM Interrupt Enable Set */ -#define REG_SERCOM4_I2CM_INTFLAG (*(RwReg8 *)0x42001818UL) /**< \brief (SERCOM4) I2CM Interrupt Flag Status and Clear */ -#define REG_SERCOM4_I2CM_STATUS (*(RwReg16*)0x4200181AUL) /**< \brief (SERCOM4) I2CM Status */ -#define REG_SERCOM4_I2CM_SYNCBUSY (*(RoReg *)0x4200181CUL) /**< \brief (SERCOM4) I2CM Syncbusy */ -#define REG_SERCOM4_I2CM_ADDR (*(RwReg *)0x42001824UL) /**< \brief (SERCOM4) I2CM Address */ -#define REG_SERCOM4_I2CM_DATA (*(RwReg8 *)0x42001828UL) /**< \brief (SERCOM4) I2CM Data */ -#define REG_SERCOM4_I2CM_DBGCTRL (*(RwReg8 *)0x42001830UL) /**< \brief (SERCOM4) I2CM Debug Control */ -#define REG_SERCOM4_I2CS_CTRLA (*(RwReg *)0x42001800UL) /**< \brief (SERCOM4) I2CS Control A */ -#define REG_SERCOM4_I2CS_CTRLB (*(RwReg *)0x42001804UL) /**< \brief (SERCOM4) I2CS Control B */ -#define REG_SERCOM4_I2CS_INTENCLR (*(RwReg8 *)0x42001814UL) /**< \brief (SERCOM4) I2CS Interrupt Enable Clear */ -#define REG_SERCOM4_I2CS_INTENSET (*(RwReg8 *)0x42001816UL) /**< \brief (SERCOM4) I2CS Interrupt Enable Set */ -#define REG_SERCOM4_I2CS_INTFLAG (*(RwReg8 *)0x42001818UL) /**< \brief (SERCOM4) I2CS Interrupt Flag Status and Clear */ -#define REG_SERCOM4_I2CS_STATUS (*(RwReg16*)0x4200181AUL) /**< \brief (SERCOM4) I2CS Status */ -#define REG_SERCOM4_I2CS_SYNCBUSY (*(RoReg *)0x4200181CUL) /**< \brief (SERCOM4) I2CS Syncbusy */ -#define REG_SERCOM4_I2CS_ADDR (*(RwReg *)0x42001824UL) /**< \brief (SERCOM4) I2CS Address */ -#define REG_SERCOM4_I2CS_DATA (*(RwReg8 *)0x42001828UL) /**< \brief (SERCOM4) I2CS Data */ -#define REG_SERCOM4_SPI_CTRLA (*(RwReg *)0x42001800UL) /**< \brief (SERCOM4) SPI Control A */ -#define REG_SERCOM4_SPI_CTRLB (*(RwReg *)0x42001804UL) /**< \brief (SERCOM4) SPI Control B */ -#define REG_SERCOM4_SPI_BAUD (*(RwReg8 *)0x4200180CUL) /**< \brief (SERCOM4) SPI Baud Rate */ -#define REG_SERCOM4_SPI_INTENCLR (*(RwReg8 *)0x42001814UL) /**< \brief (SERCOM4) SPI Interrupt Enable Clear */ -#define REG_SERCOM4_SPI_INTENSET (*(RwReg8 *)0x42001816UL) /**< \brief (SERCOM4) SPI Interrupt Enable Set */ -#define REG_SERCOM4_SPI_INTFLAG (*(RwReg8 *)0x42001818UL) /**< \brief (SERCOM4) SPI Interrupt Flag Status and Clear */ -#define REG_SERCOM4_SPI_STATUS (*(RwReg16*)0x4200181AUL) /**< \brief (SERCOM4) SPI Status */ -#define REG_SERCOM4_SPI_SYNCBUSY (*(RoReg *)0x4200181CUL) /**< \brief (SERCOM4) SPI Syncbusy */ -#define REG_SERCOM4_SPI_ADDR (*(RwReg *)0x42001824UL) /**< \brief (SERCOM4) SPI Address */ -#define REG_SERCOM4_SPI_DATA (*(RwReg *)0x42001828UL) /**< \brief (SERCOM4) SPI Data */ -#define REG_SERCOM4_SPI_DBGCTRL (*(RwReg8 *)0x42001830UL) /**< \brief (SERCOM4) SPI Debug Control */ -#define REG_SERCOM4_USART_CTRLA (*(RwReg *)0x42001800UL) /**< \brief (SERCOM4) USART Control A */ -#define REG_SERCOM4_USART_CTRLB (*(RwReg *)0x42001804UL) /**< \brief (SERCOM4) USART Control B */ -#define REG_SERCOM4_USART_BAUD (*(RwReg16*)0x4200180CUL) /**< \brief (SERCOM4) USART Baud Rate */ -#define REG_SERCOM4_USART_RXPL (*(RwReg8 *)0x4200180EUL) /**< \brief (SERCOM4) USART Receive Pulse Length */ -#define REG_SERCOM4_USART_INTENCLR (*(RwReg8 *)0x42001814UL) /**< \brief (SERCOM4) USART Interrupt Enable Clear */ -#define REG_SERCOM4_USART_INTENSET (*(RwReg8 *)0x42001816UL) /**< \brief (SERCOM4) USART Interrupt Enable Set */ -#define REG_SERCOM4_USART_INTFLAG (*(RwReg8 *)0x42001818UL) /**< \brief (SERCOM4) USART Interrupt Flag Status and Clear */ -#define REG_SERCOM4_USART_STATUS (*(RwReg16*)0x4200181AUL) /**< \brief (SERCOM4) USART Status */ -#define REG_SERCOM4_USART_SYNCBUSY (*(RoReg *)0x4200181CUL) /**< \brief (SERCOM4) USART Syncbusy */ -#define REG_SERCOM4_USART_DATA (*(RwReg16*)0x42001828UL) /**< \brief (SERCOM4) USART Data */ -#define REG_SERCOM4_USART_DBGCTRL (*(RwReg8 *)0x42001830UL) /**< \brief (SERCOM4) USART Debug Control */ -#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ - -/* ========== Instance parameters for SERCOM4 peripheral ========== */ -#define SERCOM4_DMAC_ID_RX 9 // Index of DMA RX trigger -#define SERCOM4_DMAC_ID_TX 10 // Index of DMA TX trigger -#define SERCOM4_GCLK_ID_CORE 24 // Index of Generic Clock for Core -#define SERCOM4_GCLK_ID_SLOW 19 // Index of Generic Clock for SMbus timeout -#define SERCOM4_INT_MSB 6 - -#endif /* _SAMD21_SERCOM4_INSTANCE_ */ |