diff options
Diffstat (limited to 'atmel-samd/asf_conf')
| -rw-r--r-- | atmel-samd/asf_conf/conf_clocks_crystalless.h | 198 | ||||
| -rw-r--r-- | atmel-samd/asf_conf/conf_clocks_external_32k.h | 197 | ||||
| -rw-r--r-- | atmel-samd/asf_conf/conf_dma.h | 51 | ||||
| -rw-r--r-- | atmel-samd/asf_conf/conf_extint.h | 51 | ||||
| -rw-r--r-- | atmel-samd/asf_conf/conf_sleepmgr.h | 52 | ||||
| -rw-r--r-- | atmel-samd/asf_conf/conf_spi.h | 54 | ||||
| -rw-r--r-- | atmel-samd/asf_conf/user_board.h | 40 |
7 files changed, 0 insertions, 643 deletions
diff --git a/atmel-samd/asf_conf/conf_clocks_crystalless.h b/atmel-samd/asf_conf/conf_clocks_crystalless.h deleted file mode 100644 index 5e7ad962d..000000000 --- a/atmel-samd/asf_conf/conf_clocks_crystalless.h +++ /dev/null @@ -1,198 +0,0 @@ -/** - * \file - * - * \brief SAM D21 Clock configuration - * - * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved. - * - * \asf_license_start - * - * \page License - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * 3. The name of Atmel may not be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * 4. This software may only be redistributed and used in connection with an - * Atmel microcontroller product. - * - * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE - * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - * \asf_license_stop - * - */ -/* - * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> - */ -#include <clock.h> - -#ifndef CONF_CLOCKS_H_INCLUDED -# define CONF_CLOCKS_H_INCLUDED - -/* System clock bus configuration */ -# define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT false -# define CONF_CLOCK_FLASH_WAIT_STATES 2 -# define CONF_CLOCK_CPU_DIVIDER SYSTEM_MAIN_CLOCK_DIV_1 -# define CONF_CLOCK_APBA_DIVIDER SYSTEM_MAIN_CLOCK_DIV_1 -# define CONF_CLOCK_APBB_DIVIDER SYSTEM_MAIN_CLOCK_DIV_1 -# define CONF_CLOCK_APBC_DIVIDER SYSTEM_MAIN_CLOCK_DIV_1 - -/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */ -# define CONF_CLOCK_OSC8M_PRESCALER SYSTEM_OSC8M_DIV_1 -# define CONF_CLOCK_OSC8M_ON_DEMAND true -# define CONF_CLOCK_OSC8M_RUN_IN_STANDBY false - -/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */ -# define CONF_CLOCK_XOSC_ENABLE false -# define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL SYSTEM_CLOCK_EXTERNAL_CRYSTAL -# define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY 12000000UL -# define CONF_CLOCK_XOSC_STARTUP_TIME SYSTEM_XOSC_STARTUP_32768 -# define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL true -# define CONF_CLOCK_XOSC_ON_DEMAND true -# define CONF_CLOCK_XOSC_RUN_IN_STANDBY false - -/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */ -# define CONF_CLOCK_XOSC32K_ENABLE false -# define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL SYSTEM_CLOCK_EXTERNAL_CRYSTAL -# define CONF_CLOCK_XOSC32K_STARTUP_TIME SYSTEM_XOSC32K_STARTUP_65536 -# define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL false -# define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT false -# define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT true -# define CONF_CLOCK_XOSC32K_ON_DEMAND false -# define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY true - -/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */ -# define CONF_CLOCK_OSC32K_ENABLE false -# define CONF_CLOCK_OSC32K_STARTUP_TIME SYSTEM_OSC32K_STARTUP_130 -# define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT true -# define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT true -# define CONF_CLOCK_OSC32K_ON_DEMAND true -# define CONF_CLOCK_OSC32K_RUN_IN_STANDBY false - -/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */ -// USB Clock Source fixed at DFLL. -# define CONF_CLOCK_DFLL_ENABLE true -# define CONF_CLOCK_DFLL_LOOP_MODE SYSTEM_CLOCK_DFLL_LOOP_MODE_USB_RECOVERY -# define CONF_CLOCK_DFLL_ON_DEMAND true - -/* DFLL open loop mode configuration */ -# define CONF_CLOCK_DFLL_FINE_VALUE (512) - -/* DFLL closed loop mode configuration */ -# define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR GCLK_GENERATOR_1 -# define CONF_CLOCK_DFLL_MULTIPLY_FACTOR (48000000 / 32768) -# define CONF_CLOCK_DFLL_QUICK_LOCK true -# define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK true -# define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP true -# define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE true -# define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE (0x1f / 4) -# define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE (0xff / 4) - -/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */ -# define CONF_CLOCK_DPLL_ENABLE false -# define CONF_CLOCK_DPLL_ON_DEMAND true -# define CONF_CLOCK_DPLL_RUN_IN_STANDBY false -# define CONF_CLOCK_DPLL_LOCK_BYPASS false -# define CONF_CLOCK_DPLL_WAKE_UP_FAST false -# define CONF_CLOCK_DPLL_LOW_POWER_ENABLE false - -# define CONF_CLOCK_DPLL_LOCK_TIME SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT -# define CONF_CLOCK_DPLL_REFERENCE_CLOCK SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K -# define CONF_CLOCK_DPLL_FILTER SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT - -# define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY 32768 -# define CONF_CLOCK_DPLL_REFERENCE_DIVIDER 1 -# define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY 48000000 - -/* DPLL GCLK reference configuration */ -# define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1 -/* DPLL GCLK lock timer configuration */ -# define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR GCLK_GENERATOR_1 - -/* Set this to true to configure the GCLK when running clocks_init. If set to - * false, none of the GCLK generators will be configured in clocks_init(). */ -# define CONF_CLOCK_CONFIGURE_GCLK true - -/* Configure GCLK generator 0 (Main Clock) */ -# define CONF_CLOCK_GCLK_0_ENABLE true -# define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY true -# define CONF_CLOCK_GCLK_0_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_DFLL -# define CONF_CLOCK_GCLK_0_PRESCALER 1 -# define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE false - -/* Configure GCLK generator 1 */ -# define CONF_CLOCK_GCLK_1_ENABLE false -# define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY false -# define CONF_CLOCK_GCLK_1_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_OSC8M -# define CONF_CLOCK_GCLK_1_PRESCALER 1 -# define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE false - -/* Configure GCLK generator 2 (RTC) */ -# define CONF_CLOCK_GCLK_2_ENABLE false -# define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY false -# define CONF_CLOCK_GCLK_2_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_OSC32K -# define CONF_CLOCK_GCLK_2_PRESCALER 32 -# define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE false - -/* Configure GCLK generator 3 */ -# define CONF_CLOCK_GCLK_3_ENABLE true -# define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY true -# define CONF_CLOCK_GCLK_3_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_OSC8M -# define CONF_CLOCK_GCLK_3_PRESCALER 1 -# define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE false - -/* Configure GCLK generator 4 */ -# define CONF_CLOCK_GCLK_4_ENABLE false -# define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY false -# define CONF_CLOCK_GCLK_4_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_OSC8M -# define CONF_CLOCK_GCLK_4_PRESCALER 1 -# define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE false - -/* Configure GCLK generator 5 */ -# define CONF_CLOCK_GCLK_5_ENABLE false -# define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY false -# define CONF_CLOCK_GCLK_5_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_OSC8M -# define CONF_CLOCK_GCLK_5_PRESCALER 1 -# define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE false - -/* Configure GCLK generator 6 */ -# define CONF_CLOCK_GCLK_6_ENABLE false -# define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY false -# define CONF_CLOCK_GCLK_6_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_OSC8M -# define CONF_CLOCK_GCLK_6_PRESCALER 1 -# define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE false - -/* Configure GCLK generator 7 */ -# define CONF_CLOCK_GCLK_7_ENABLE false -# define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY false -# define CONF_CLOCK_GCLK_7_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_OSC8M -# define CONF_CLOCK_GCLK_7_PRESCALER 1 -# define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE false - -/* Configure GCLK generator 8 */ -# define CONF_CLOCK_GCLK_8_ENABLE false -# define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY false -# define CONF_CLOCK_GCLK_8_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_OSC8M -# define CONF_CLOCK_GCLK_8_PRESCALER 1 -# define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE false - -#endif /* CONF_CLOCKS_H_INCLUDED */ diff --git a/atmel-samd/asf_conf/conf_clocks_external_32k.h b/atmel-samd/asf_conf/conf_clocks_external_32k.h deleted file mode 100644 index 5af6ad4d6..000000000 --- a/atmel-samd/asf_conf/conf_clocks_external_32k.h +++ /dev/null @@ -1,197 +0,0 @@ -/** - * \file - * - * \brief SAM D21 Clock configuration - * - * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved. - * - * \asf_license_start - * - * \page License - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * 3. The name of Atmel may not be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * 4. This software may only be redistributed and used in connection with an - * Atmel microcontroller product. - * - * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE - * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - * \asf_license_stop - * - */ -/* - * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> - */ -#include <clock.h> - -#ifndef CONF_CLOCKS_H_INCLUDED -# define CONF_CLOCKS_H_INCLUDED - -/* System clock bus configuration */ -# define CONF_CLOCK_CPU_CLOCK_FAILURE_DETECT false -# define CONF_CLOCK_FLASH_WAIT_STATES 2 -# define CONF_CLOCK_CPU_DIVIDER SYSTEM_MAIN_CLOCK_DIV_1 -# define CONF_CLOCK_APBA_DIVIDER SYSTEM_MAIN_CLOCK_DIV_1 -# define CONF_CLOCK_APBB_DIVIDER SYSTEM_MAIN_CLOCK_DIV_1 -# define CONF_CLOCK_APBC_DIVIDER SYSTEM_MAIN_CLOCK_DIV_1 - -/* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */ -# define CONF_CLOCK_OSC8M_PRESCALER SYSTEM_OSC8M_DIV_1 -# define CONF_CLOCK_OSC8M_ON_DEMAND true -# define CONF_CLOCK_OSC8M_RUN_IN_STANDBY false - -/* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */ -# define CONF_CLOCK_XOSC_ENABLE false -# define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL SYSTEM_CLOCK_EXTERNAL_CRYSTAL -# define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY 12000000UL -# define CONF_CLOCK_XOSC_STARTUP_TIME SYSTEM_XOSC_STARTUP_32768 -# define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL true -# define CONF_CLOCK_XOSC_ON_DEMAND true -# define CONF_CLOCK_XOSC_RUN_IN_STANDBY false - -/* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */ -# define CONF_CLOCK_XOSC32K_ENABLE true -# define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL SYSTEM_CLOCK_EXTERNAL_CRYSTAL -# define CONF_CLOCK_XOSC32K_STARTUP_TIME SYSTEM_XOSC32K_STARTUP_65536 -# define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL false -# define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT false -# define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT true -# define CONF_CLOCK_XOSC32K_ON_DEMAND false -# define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY true - -/* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */ -# define CONF_CLOCK_OSC32K_ENABLE false -# define CONF_CLOCK_OSC32K_STARTUP_TIME SYSTEM_OSC32K_STARTUP_130 -# define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT true -# define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT true -# define CONF_CLOCK_OSC32K_ON_DEMAND true -# define CONF_CLOCK_OSC32K_RUN_IN_STANDBY false - -/* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */ -# define CONF_CLOCK_DFLL_ENABLE true -# define CONF_CLOCK_DFLL_LOOP_MODE SYSTEM_CLOCK_DFLL_LOOP_MODE_CLOSED -# define CONF_CLOCK_DFLL_ON_DEMAND true - -/* DFLL open loop mode configuration */ -# define CONF_CLOCK_DFLL_FINE_VALUE (512) - -/* DFLL closed loop mode configuration */ -# define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR GCLK_GENERATOR_1 -# define CONF_CLOCK_DFLL_MULTIPLY_FACTOR (48000000 / 32768) -# define CONF_CLOCK_DFLL_QUICK_LOCK true -# define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK true -# define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP true -# define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE true -# define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE (0x1f / 4) -# define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE (0xff / 4) - -/* SYSTEM_CLOCK_SOURCE_DPLL configuration - Digital Phase-Locked Loop */ -# define CONF_CLOCK_DPLL_ENABLE false -# define CONF_CLOCK_DPLL_ON_DEMAND true -# define CONF_CLOCK_DPLL_RUN_IN_STANDBY false -# define CONF_CLOCK_DPLL_LOCK_BYPASS false -# define CONF_CLOCK_DPLL_WAKE_UP_FAST false -# define CONF_CLOCK_DPLL_LOW_POWER_ENABLE false - -# define CONF_CLOCK_DPLL_LOCK_TIME SYSTEM_CLOCK_SOURCE_DPLL_LOCK_TIME_DEFAULT -# define CONF_CLOCK_DPLL_REFERENCE_CLOCK SYSTEM_CLOCK_SOURCE_DPLL_REFERENCE_CLOCK_XOSC32K -# define CONF_CLOCK_DPLL_FILTER SYSTEM_CLOCK_SOURCE_DPLL_FILTER_DEFAULT - -# define CONF_CLOCK_DPLL_REFERENCE_FREQUENCY 32768 -# define CONF_CLOCK_DPLL_REFERENCE_DIVIDER 1 -# define CONF_CLOCK_DPLL_OUTPUT_FREQUENCY 48000000 - -/* DPLL GCLK reference configuration */ -# define CONF_CLOCK_DPLL_REFERENCE_GCLK_GENERATOR GCLK_GENERATOR_1 -/* DPLL GCLK lock timer configuration */ -# define CONF_CLOCK_DPLL_LOCK_GCLK_GENERATOR GCLK_GENERATOR_1 - -/* Set this to true to configure the GCLK when running clocks_init. If set to - * false, none of the GCLK generators will be configured in clocks_init(). */ -# define CONF_CLOCK_CONFIGURE_GCLK true - -/* Configure GCLK generator 0 (Main Clock) */ -# define CONF_CLOCK_GCLK_0_ENABLE true -# define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY true -# define CONF_CLOCK_GCLK_0_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_DFLL -# define CONF_CLOCK_GCLK_0_PRESCALER 1 -# define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE false - -/* Configure GCLK generator 1 */ -# define CONF_CLOCK_GCLK_1_ENABLE true -# define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY false -# define CONF_CLOCK_GCLK_1_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_XOSC32K -# define CONF_CLOCK_GCLK_1_PRESCALER 1 -# define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE true - -/* Configure GCLK generator 2 (RTC) */ -# define CONF_CLOCK_GCLK_2_ENABLE false -# define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY false -# define CONF_CLOCK_GCLK_2_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_OSC32K -# define CONF_CLOCK_GCLK_2_PRESCALER 32 -# define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE false - -/* Configure GCLK generator 3 */ -# define CONF_CLOCK_GCLK_3_ENABLE true -# define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY true -# define CONF_CLOCK_GCLK_3_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_OSC8M -# define CONF_CLOCK_GCLK_3_PRESCALER 1 -# define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE false - -/* Configure GCLK generator 4 */ -# define CONF_CLOCK_GCLK_4_ENABLE false -# define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY false -# define CONF_CLOCK_GCLK_4_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_OSC8M -# define CONF_CLOCK_GCLK_4_PRESCALER 1 -# define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE false - -/* Configure GCLK generator 5 */ -# define CONF_CLOCK_GCLK_5_ENABLE false -# define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY false -# define CONF_CLOCK_GCLK_5_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_OSC8M -# define CONF_CLOCK_GCLK_5_PRESCALER 1 -# define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE false - -/* Configure GCLK generator 6 */ -# define CONF_CLOCK_GCLK_6_ENABLE false -# define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY false -# define CONF_CLOCK_GCLK_6_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_OSC8M -# define CONF_CLOCK_GCLK_6_PRESCALER 1 -# define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE false - -/* Configure GCLK generator 7 */ -# define CONF_CLOCK_GCLK_7_ENABLE false -# define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY false -# define CONF_CLOCK_GCLK_7_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_OSC8M -# define CONF_CLOCK_GCLK_7_PRESCALER 1 -# define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE false - -/* Configure GCLK generator 8 */ -# define CONF_CLOCK_GCLK_8_ENABLE false -# define CONF_CLOCK_GCLK_8_RUN_IN_STANDBY false -# define CONF_CLOCK_GCLK_8_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_OSC8M -# define CONF_CLOCK_GCLK_8_PRESCALER 1 -# define CONF_CLOCK_GCLK_8_OUTPUT_ENABLE false - -#endif /* CONF_CLOCKS_H_INCLUDED */ diff --git a/atmel-samd/asf_conf/conf_dma.h b/atmel-samd/asf_conf/conf_dma.h deleted file mode 100644 index afe790a64..000000000 --- a/atmel-samd/asf_conf/conf_dma.h +++ /dev/null @@ -1,51 +0,0 @@ -/** - * \file - * - * \brief SAM D21 Direct Memory Access Driver Configuration Header - * - * Copyright (C) 2014-2015 Atmel Corporation. All rights reserved. - * - * \asf_license_start - * - * \page License - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * 3. The name of Atmel may not be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * 4. This software may only be redistributed and used in connection with an - * Atmel microcontroller product. - * - * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE - * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - * \asf_license_stop - * - */ -/* - * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> - */ -#ifndef CONF_DMA_H_INCLUDED -#define CONF_DMA_H_INCLUDED - -# define CONF_MAX_USED_CHANNEL_NUM 3 - -#endif diff --git a/atmel-samd/asf_conf/conf_extint.h b/atmel-samd/asf_conf/conf_extint.h deleted file mode 100644 index abcbdb84d..000000000 --- a/atmel-samd/asf_conf/conf_extint.h +++ /dev/null @@ -1,51 +0,0 @@ -/** - * \file - * - * \brief SAM D21 External Interrupt Driver Configuration Header - * - * Copyright (C) 2013-2015 Atmel Corporation. All rights reserved. - * - * \asf_license_start - * - * \page License - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * 3. The name of Atmel may not be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * 4. This software may only be redistributed and used in connection with an - * Atmel microcontroller product. - * - * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE - * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - * \asf_license_stop - * - */ -/* - * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> - */ -#ifndef CONF_EXTINT_H_INCLUDED -#define CONF_EXTINT_H_INCLUDED - -# define EXTINT_CLOCK_SOURCE GCLK_GENERATOR_0 - -#endif diff --git a/atmel-samd/asf_conf/conf_sleepmgr.h b/atmel-samd/asf_conf/conf_sleepmgr.h deleted file mode 100644 index 281a36078..000000000 --- a/atmel-samd/asf_conf/conf_sleepmgr.h +++ /dev/null @@ -1,52 +0,0 @@ -/** - * \file - * - * \brief Sleep manager configuration - * - * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved. - * - * \asf_license_start - * - * \page License - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * 3. The name of Atmel may not be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * 4. This software may only be redistributed and used in connection with an - * Atmel microcontroller product. - * - * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE - * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - * \asf_license_stop - * - */ -/* - * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> - */ - -#ifndef CONF_SLEEPMGR_H_INCLUDED -#define CONF_SLEEPMGR_H_INCLUDED - -#define CONFIG_SLEEPMGR_ENABLE - -#endif /* CONF_SLEEPMGR_H_INCLUDED */ diff --git a/atmel-samd/asf_conf/conf_spi.h b/atmel-samd/asf_conf/conf_spi.h deleted file mode 100644 index d093a58c5..000000000 --- a/atmel-samd/asf_conf/conf_spi.h +++ /dev/null @@ -1,54 +0,0 @@ -/** - * \file - * - * \brief SAM D21 SPI configuration - * - * Copyright (C) 2013-2016 Atmel Corporation. All rights reserved. - * - * \asf_license_start - * - * \page License - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * 3. The name of Atmel may not be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * 4. This software may only be redistributed and used in connection with an - * Atmel microcontroller product. - * - * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE - * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR - * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - * \asf_license_stop - * - */ -/* - * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> - */ - - -#ifndef CONF_SPI_H_INCLUDED -#define CONF_SPI_H_INCLUDED - -#define CONF_SPI_MASTER_ENABLE true -#define CONF_SPI_SLAVE_ENABLE false - -#endif /* CONF_SPI_H_INCLUDED */ diff --git a/atmel-samd/asf_conf/user_board.h b/atmel-samd/asf_conf/user_board.h deleted file mode 100644 index 39980a7d2..000000000 --- a/atmel-samd/asf_conf/user_board.h +++ /dev/null @@ -1,40 +0,0 @@ -/** - * \file - * - * \brief User board definition template - * - */ - - /* This file is intended to contain definitions and configuration details for - * features and devices that are available on the board, e.g., frequency and - * startup time for an external crystal, external memory devices, LED and USART - * pins. - */ -/* - * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> - */ - -#ifndef USER_BOARD_H -#define USER_BOARD_H - -#include <conf_board.h> - -// External oscillator settings. -// Uncomment and set correct values if external oscillator is used. - -// External oscillator frequency -//#define BOARD_XOSC_HZ 8000000 - -// External oscillator type. -//!< External clock signal -//#define BOARD_XOSC_TYPE XOSC_TYPE_EXTERNAL -//!< 32.768 kHz resonator on TOSC -//#define BOARD_XOSC_TYPE XOSC_TYPE_32KHZ -//!< 0.4 to 16 MHz resonator on XTALS -//#define BOARD_XOSC_TYPE XOSC_TYPE_XTAL - -// External oscillator startup time -//#define BOARD_XOSC_STARTUP_US 500000 - - -#endif // USER_BOARD_H |