diff options
Diffstat (limited to 'docs/library/pyb.Pin.rst')
| -rw-r--r-- | docs/library/pyb.Pin.rst | 280 |
1 files changed, 0 insertions, 280 deletions
diff --git a/docs/library/pyb.Pin.rst b/docs/library/pyb.Pin.rst deleted file mode 100644 index b766c5280..000000000 --- a/docs/library/pyb.Pin.rst +++ /dev/null @@ -1,280 +0,0 @@ -.. currentmodule:: pyb -.. _pyb.Pin: - -class Pin -- control I/O pins -============================= - -A pin is the basic object to control I/O pins. It has methods to set -the mode of the pin (input, output, etc) and methods to get and set the -digital logic level. For analog control of a pin, see the ADC class. - -Usage Model: - -.. only:: port_pyboard - - All Board Pins are predefined as pyb.Pin.board.Name:: - - x1_pin = pyb.Pin.board.X1 - - g = pyb.Pin(pyb.Pin.board.X1, pyb.Pin.IN) - - CPU pins which correspond to the board pins are available - as ``pyb.cpu.Name``. For the CPU pins, the names are the port letter - followed by the pin number. On the PYBv1.0, ``pyb.Pin.board.X1`` and - ``pyb.Pin.cpu.A0`` are the same pin. - - You can also use strings:: - - g = pyb.Pin('X1', pyb.Pin.OUT_PP) - - Users can add their own names:: - - MyMapperDict = { 'LeftMotorDir' : pyb.Pin.cpu.C12 } - pyb.Pin.dict(MyMapperDict) - g = pyb.Pin("LeftMotorDir", pyb.Pin.OUT_OD) - - and can query mappings:: - - pin = pyb.Pin("LeftMotorDir") - - Users can also add their own mapping function:: - - def MyMapper(pin_name): - if pin_name == "LeftMotorDir": - return pyb.Pin.cpu.A0 - - pyb.Pin.mapper(MyMapper) - - So, if you were to call: ``pyb.Pin("LeftMotorDir", pyb.Pin.OUT_PP)`` - then ``"LeftMotorDir"`` is passed directly to the mapper function. - - To summarise, the following order determines how things get mapped into - an ordinal pin number: - - 1. Directly specify a pin object - 2. User supplied mapping function - 3. User supplied mapping (object must be usable as a dictionary key) - 4. Supply a string which matches a board pin - 5. Supply a string which matches a CPU port/pin - - You can set ``pyb.Pin.debug(True)`` to get some debug information about - how a particular object gets mapped to a pin. - - When a pin has the ``Pin.PULL_UP`` or ``Pin.PULL_DOWN`` pull-mode enabled, - that pin has an effective 40k Ohm resistor pulling it to 3V3 or GND - respectively (except pin Y5 which has 11k Ohm resistors). - - Now every time a falling edge is seen on the gpio pin, the callback will be - executed. Caution: mechanical push buttons have "bounce" and pushing or - releasing a switch will often generate multiple edges. - See: http://www.eng.utah.edu/~cs5780/debouncing.pdf for a detailed - explanation, along with various techniques for debouncing. - - All pin objects go through the pin mapper to come up with one of the - gpio pins. - -Constructors ------------- - -.. class:: pyb.Pin(id, ...) - - Create a new Pin object associated with the id. If additional arguments are given, - they are used to initialise the pin. See :meth:`pin.init`. - -.. only:: port_pyboard - - Class methods - ------------- - - .. classmethod:: Pin.debug([state]) - - Get or set the debugging state (``True`` or ``False`` for on or off). - - .. classmethod:: Pin.dict([dict]) - - Get or set the pin mapper dictionary. - - .. classmethod:: Pin.mapper([fun]) - - Get or set the pin mapper function. - - -Methods -------- - -.. only:: port_pyboard - - .. method:: Pin.init(mode, pull=Pin.PULL_NONE, af=-1) - - Initialise the pin: - - - ``mode`` can be one of: - - - ``Pin.IN`` - configure the pin for input; - - ``Pin.OUT_PP`` - configure the pin for output, with push-pull control; - - ``Pin.OUT_OD`` - configure the pin for output, with open-drain control; - - ``Pin.AF_PP`` - configure the pin for alternate function, pull-pull; - - ``Pin.AF_OD`` - configure the pin for alternate function, open-drain; - - ``Pin.ANALOG`` - configure the pin for analog. - - - ``pull`` can be one of: - - - ``Pin.PULL_NONE`` - no pull up or down resistors; - - ``Pin.PULL_UP`` - enable the pull-up resistor; - - ``Pin.PULL_DOWN`` - enable the pull-down resistor. - - - when mode is ``Pin.AF_PP`` or ``Pin.AF_OD``, then af can be the index or name - of one of the alternate functions associated with a pin. - - Returns: ``None``. - -.. method:: Pin.value([value]) - - Get or set the digital logic level of the pin: - - - With no argument, return 0 or 1 depending on the logic level of the pin. - - With ``value`` given, set the logic level of the pin. ``value`` can be - anything that converts to a boolean. If it converts to ``True``, the pin - is set high, otherwise it is set low. - -.. only:: port_pyboard - - .. method:: Pin.__str__() - - Return a string describing the pin object. - - .. method:: Pin.af() - - Returns the currently configured alternate-function of the pin. The - integer returned will match one of the allowed constants for the af - argument to the init function. - - .. method:: Pin.af_list() - - Returns an array of alternate functions available for this pin. - - .. method:: Pin.gpio() - - Returns the base address of the GPIO block associated with this pin. - - .. method:: Pin.mode() - - Returns the currently configured mode of the pin. The integer returned - will match one of the allowed constants for the mode argument to the init - function. - - .. method:: Pin.name() - - Get the pin name. - - .. method:: Pin.names() - - Returns the cpu and board names for this pin. - - .. method:: Pin.pin() - - Get the pin number. - - .. method:: Pin.port() - - Get the pin port. - -.. method:: Pin.pull() - - Returns the currently configured pull of the pin. The integer returned - will match one of the allowed constants for the pull argument to the init - function. - -Constants ---------- - -.. only:: port_pyboard - - .. data:: Pin.AF_OD - - initialise the pin to alternate-function mode with an open-drain drive - - .. data:: Pin.AF_PP - - initialise the pin to alternate-function mode with a push-pull drive - - .. data:: Pin.ANALOG - - initialise the pin to analog mode - - .. data:: Pin.IN - - initialise the pin to input mode - - .. data:: Pin.OUT_OD - - initialise the pin to output mode with an open-drain drive - - .. data:: Pin.OUT_PP - - initialise the pin to output mode with a push-pull drive - - .. data:: Pin.PULL_DOWN - - enable the pull-down resistor on the pin - - .. data:: Pin.PULL_NONE - - don't enable any pull up or down resistors on the pin - - .. data:: Pin.PULL_UP - - enable the pull-up resistor on the pin - -.. only:: port_pyboard - - class PinAF -- Pin Alternate Functions - ====================================== - - A Pin represents a physical pin on the microprocessor. Each pin - can have a variety of functions (GPIO, I2C SDA, etc). Each PinAF - object represents a particular function for a pin. - - Usage Model:: - - x3 = pyb.Pin.board.X3 - x3_af = x3.af_list() - - x3_af will now contain an array of PinAF objects which are available on - pin X3. - - For the pyboard, x3_af would contain: - [Pin.AF1_TIM2, Pin.AF2_TIM5, Pin.AF3_TIM9, Pin.AF7_USART2] - - Normally, each peripheral would configure the af automatically, but sometimes - the same function is available on multiple pins, and having more control - is desired. - - To configure X3 to expose TIM2_CH3, you could use:: - - pin = pyb.Pin(pyb.Pin.board.X3, mode=pyb.Pin.AF_PP, af=pyb.Pin.AF1_TIM2) - - or:: - - pin = pyb.Pin(pyb.Pin.board.X3, mode=pyb.Pin.AF_PP, af=1) - - Methods - ------- - - .. method:: pinaf.__str__() - - Return a string describing the alternate function. - - .. method:: pinaf.index() - - Return the alternate function index. - - .. method:: pinaf.name() - - Return the name of the alternate function. - - .. method:: pinaf.reg() - - Return the base register associated with the peripheral assigned to this - alternate function. For example, if the alternate function were TIM2_CH3 - this would return stm.TIM2 |