summaryrefslogtreecommitdiff
path: root/locale/ko.po
diff options
context:
space:
mode:
Diffstat (limited to 'locale/ko.po')
-rw-r--r--locale/ko.po135
1 files changed, 75 insertions, 60 deletions
diff --git a/locale/ko.po b/locale/ko.po
index 656adf2cb..575a88b62 100644
--- a/locale/ko.po
+++ b/locale/ko.po
@@ -8,7 +8,7 @@ msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-03-11 17:52-0400\n"
+"POT-Creation-Date: 2020-03-20 17:57-0500\n"
"PO-Revision-Date: 2019-05-06 14:22-0700\n"
"Last-Translator: \n"
"Language-Team: LANGUAGE <LL@li.org>\n"
@@ -135,6 +135,10 @@ msgstr ""
msgid "'%s' integer 0x%x does not fit in mask 0x%x"
msgstr ""
+#: py/runtime.c
+msgid "'%s' object cannot assign attribute '%q'"
+msgstr ""
+
#: py/proto.c
msgid "'%s' object does not support '%q'"
msgstr ""
@@ -476,7 +480,7 @@ msgstr ""
msgid "Cannot unambiguously get sizeof scalar"
msgstr ""
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+#: ports/stm/common-hal/pulseio/PWMOut.c
msgid "Cannot vary frequency on a timer that is already in use"
msgstr ""
@@ -537,31 +541,31 @@ msgstr ""
msgid "Could not initialize UART"
msgstr ""
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+#: ports/stm/common-hal/pulseio/PWMOut.c
msgid "Could not initialize channel"
msgstr ""
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+#: ports/stm/common-hal/pulseio/PWMOut.c
msgid "Could not initialize timer"
msgstr ""
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+#: ports/stm/common-hal/pulseio/PWMOut.c
msgid "Could not re-init channel"
msgstr ""
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+#: ports/stm/common-hal/pulseio/PWMOut.c
msgid "Could not re-init timer"
msgstr ""
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+#: ports/stm/common-hal/pulseio/PWMOut.c
msgid "Could not restart PWM"
msgstr ""
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+#: ports/stm/common-hal/pulseio/PWMOut.c
msgid "Could not start PWM"
msgstr ""
-#: ports/stm32f4/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
msgid "Could not start interrupt, RX busy"
msgstr ""
@@ -587,11 +591,11 @@ msgstr ""
msgid "Crash into the HardFault_Handler."
msgstr ""
-#: ports/stm32f4/common-hal/analogio/AnalogOut.c
+#: ports/stm/common-hal/analogio/AnalogOut.c
msgid "DAC Channel Init Error"
msgstr ""
-#: ports/stm32f4/common-hal/analogio/AnalogOut.c
+#: ports/stm/common-hal/analogio/AnalogOut.c
msgid "DAC Device Init Error"
msgstr ""
@@ -702,7 +706,7 @@ msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
-#: ports/stm32f4/common-hal/pulseio/PulseIn.c
+#: ports/stm/common-hal/pulseio/PulseIn.c
#, c-format
msgid "Failed to allocate RX buffer of %d bytes"
msgstr ""
@@ -736,7 +740,7 @@ msgstr ""
msgid "Frequency captured is above capability. Capture Paused."
msgstr ""
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+#: ports/stm/common-hal/pulseio/PWMOut.c
msgid "Frequency must match existing PWMOut using this timer"
msgstr ""
@@ -754,11 +758,11 @@ msgstr ""
msgid "Group full"
msgstr ""
-#: ports/stm32f4/common-hal/busio/I2C.c ports/stm32f4/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c
msgid "Hardware busy, try alternative pins"
msgstr ""
-#: ports/stm32f4/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
msgid "Hardware in use, try alternative pins"
msgstr ""
@@ -766,7 +770,7 @@ msgstr ""
msgid "I/O operation on closed file"
msgstr ""
-#: ports/stm32f4/common-hal/busio/I2C.c
+#: ports/stm/common-hal/busio/I2C.c
msgid "I2C Init Error"
msgstr ""
@@ -796,7 +800,7 @@ msgstr ""
msgid "Insufficient encryption"
msgstr ""
-#: ports/stm32f4/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
msgid "Internal define error"
msgstr ""
@@ -805,7 +809,7 @@ msgstr ""
msgid "Invalid %q pin"
msgstr ""
-#: ports/stm32f4/common-hal/analogio/AnalogIn.c
+#: ports/stm/common-hal/analogio/AnalogIn.c
msgid "Invalid ADC Unit value"
msgstr ""
@@ -813,11 +817,11 @@ msgstr ""
msgid "Invalid BMP file"
msgstr ""
-#: ports/stm32f4/common-hal/analogio/AnalogOut.c
+#: ports/stm/common-hal/analogio/AnalogOut.c
msgid "Invalid DAC pin supplied"
msgstr ""
-#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/stm32f4/common-hal/busio/I2C.c
+#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c
msgid "Invalid I2C pin selection"
msgstr ""
@@ -827,12 +831,11 @@ msgstr ""
msgid "Invalid PWM frequency"
msgstr ""
-#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm32f4/common-hal/busio/SPI.c
+#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
msgid "Invalid SPI pin selection"
msgstr ""
-#: ports/mimxrt10xx/common-hal/busio/UART.c
-#: ports/stm32f4/common-hal/busio/UART.c
+#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "Invalid UART pin selection"
msgstr ""
@@ -844,7 +847,7 @@ msgstr ""
msgid "Invalid bits per value"
msgstr ""
-#: ports/nrf/common-hal/busio/UART.c ports/stm32f4/common-hal/busio/UART.c
+#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "Invalid buffer size"
msgstr ""
@@ -872,7 +875,7 @@ msgstr "파일이 유효하지 않습니다"
msgid "Invalid format chunk size"
msgstr "형식 청크 크기가 잘못되었습니다"
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+#: ports/stm/common-hal/pulseio/PWMOut.c
msgid "Invalid frequency supplied"
msgstr ""
@@ -911,7 +914,7 @@ msgstr "오른쪽 채널 핀이 잘못되었습니다"
msgid "Invalid pins"
msgstr "핀이 유효하지 않습니다"
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+#: ports/stm/common-hal/pulseio/PWMOut.c
msgid "Invalid pins for PWMOut"
msgstr ""
@@ -943,7 +946,7 @@ msgstr ""
msgid "Invalid wave file"
msgstr ""
-#: ports/stm32f4/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
msgid "Invalid word/bit length"
msgstr ""
@@ -992,7 +995,7 @@ msgstr ""
msgid "Microphone startup delay must be in range 0.0 to 1.0"
msgstr ""
-#: ports/stm32f4/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
msgid "Missing MISO or MOSI Pin"
msgstr ""
@@ -1000,7 +1003,7 @@ msgstr ""
msgid "Must be a %q subclass."
msgstr ""
-#: ports/stm32f4/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
msgid "Must provide MISO or MOSI pin"
msgstr ""
@@ -1017,7 +1020,7 @@ msgid "No CCCD for this Characteristic"
msgstr ""
#: ports/atmel-samd/common-hal/analogio/AnalogOut.c
-#: ports/stm32f4/common-hal/analogio/AnalogOut.c
+#: ports/stm/common-hal/analogio/AnalogOut.c
msgid "No DAC on chip"
msgstr ""
@@ -1026,23 +1029,23 @@ msgstr ""
msgid "No DMA channel found"
msgstr ""
-#: ports/stm32f4/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
msgid "No MISO Pin"
msgstr ""
-#: ports/stm32f4/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
msgid "No MOSI Pin"
msgstr ""
#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm32f4/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
msgid "No RX pin"
msgstr ""
#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
-#: ports/stm32f4/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
msgid "No TX pin"
msgstr ""
@@ -1071,7 +1074,7 @@ msgstr ""
msgid "No hardware support on pin"
msgstr ""
-#: ports/stm32f4/common-hal/pulseio/PWMOut.c
+#: ports/stm/common-hal/pulseio/PWMOut.c
msgid "No more timers available on this pin."
msgstr ""
@@ -1142,7 +1145,7 @@ msgid ""
msgstr ""
#: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
-#: ports/stm32f4/common-hal/displayio/ParallelBus.c
+#: ports/stm/common-hal/displayio/ParallelBus.c
msgid "ParallelBus not yet supported"
msgstr ""
@@ -1154,11 +1157,11 @@ msgstr ""
#: ports/cxd56/common-hal/analogio/AnalogIn.c
#: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
#: ports/nrf/common-hal/analogio/AnalogIn.c
-#: ports/stm32f4/common-hal/analogio/AnalogIn.c
+#: ports/stm/common-hal/analogio/AnalogIn.c
msgid "Pin does not have ADC capabilities"
msgstr ""
-#: ports/stm32f4/common-hal/pulseio/PulseIn.c
+#: ports/stm/common-hal/pulseio/PulseIn.c
msgid "Pin number already reserved by EXTI"
msgstr ""
@@ -1182,15 +1185,15 @@ msgstr ""
msgid "Pull not used when direction is output."
msgstr ""
-#: ports/stm32f4/common-hal/pulseio/PulseOut.c
+#: ports/stm/common-hal/pulseio/PulseOut.c
msgid "PulseOut not supported on this chip"
msgstr ""
-#: ports/stm32f4/common-hal/os/__init__.c
+#: ports/stm/common-hal/os/__init__.c
msgid "RNG DeInit Error"
msgstr ""
-#: ports/stm32f4/common-hal/os/__init__.c
+#: ports/stm/common-hal/os/__init__.c
msgid "RNG Init Error"
msgstr ""
@@ -1208,11 +1211,11 @@ msgid "RTC is not supported on this board"
msgstr ""
#: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
-#: ports/nrf/common-hal/busio/UART.c ports/stm32f4/common-hal/busio/UART.c
+#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "RTS/CTS/RS485 Not yet supported on this device"
msgstr ""
-#: ports/stm32f4/common-hal/os/__init__.c
+#: ports/stm/common-hal/os/__init__.c
msgid "Random number generation error"
msgstr ""
@@ -1252,11 +1255,11 @@ msgstr ""
msgid "SDA or SCL needs a pull up"
msgstr ""
-#: ports/stm32f4/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
msgid "SPI Init Error"
msgstr ""
-#: ports/stm32f4/common-hal/busio/SPI.c
+#: ports/stm/common-hal/busio/SPI.c
msgid "SPI Re-initialization error"
msgstr ""
@@ -1307,11 +1310,11 @@ msgstr ""
msgid "Stream missing readinto() or write() method."
msgstr ""
-#: ports/stm32f4/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
msgid "Supply at least one UART pin"
msgstr ""
-#: ports/stm32f4/common-hal/microcontroller/Processor.c
+#: ports/stm/common-hal/microcontroller/Processor.c
msgid "Temperature read timed out"
msgstr ""
@@ -1388,23 +1391,23 @@ msgstr ""
msgid "Tuple or struct_time argument required"
msgstr ""
-#: ports/stm32f4/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
msgid "UART Buffer allocation error"
msgstr ""
-#: ports/stm32f4/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
msgid "UART De-init error"
msgstr ""
-#: ports/stm32f4/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
msgid "UART Init Error"
msgstr ""
-#: ports/stm32f4/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
msgid "UART Re-init error"
msgstr ""
-#: ports/stm32f4/common-hal/busio/UART.c
+#: ports/stm/common-hal/busio/UART.c
msgid "UART write error"
msgstr ""
@@ -1524,7 +1527,7 @@ msgstr ""
msgid "Viper functions don't currently support more than 4 arguments"
msgstr ""
-#: ports/stm32f4/common-hal/microcontroller/Processor.c
+#: ports/stm/common-hal/microcontroller/Processor.c
msgid "Voltage read timed out"
msgstr ""
@@ -1588,6 +1591,10 @@ msgstr ""
msgid "addresses is empty"
msgstr ""
+#: extmod/ulab/code/vectorise.c
+msgid "arctan2 is implemented for scalars and ndarrays only"
+msgstr ""
+
#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr ""
@@ -2001,10 +2008,6 @@ msgstr ""
msgid "empty heap"
msgstr ""
-#: extmod/ulab/code/ndarray.c
-msgid "empty index range"
-msgstr ""
-
#: py/objstr.c
msgid "empty separator"
msgstr ""
@@ -2095,6 +2098,10 @@ msgstr ""
msgid "first argument must be an iterable"
msgstr ""
+#: extmod/ulab/code/vectorise.c
+msgid "first argument must be an ndarray"
+msgstr ""
+
#: py/objtype.c
msgid "first argument to super() must be type"
msgstr ""
@@ -2144,6 +2151,10 @@ msgstr ""
msgid "function got multiple values for argument '%q'"
msgstr ""
+#: extmod/ulab/code/linalg.c
+msgid "function is defined for ndarrays only"
+msgstr ""
+
#: py/argcheck.c
#, c-format
msgid "function missing %d required positional arguments"
@@ -2214,7 +2225,7 @@ msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
-#: ports/stm32f4/common-hal/pulseio/PulseIn.c py/obj.c
+#: ports/stm/common-hal/pulseio/PulseIn.c py/obj.c
msgid "index out of range"
msgstr ""
@@ -2412,6 +2423,10 @@ msgstr ""
msgid "matrix dimensions do not match"
msgstr ""
+#: extmod/ulab/code/linalg.c
+msgid "matrix is not positive definite"
+msgstr ""
+
#: ports/nrf/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Descriptor.c
#, c-format
@@ -2640,7 +2655,7 @@ msgstr ""
msgid "only square matrices can be inverted"
msgstr ""
-#: extmod/ulab/code/ndarray.c
+#: extmod/ulab/code/ndarray.c extmod/ulab/code/vectorise.c
msgid "operands could not be broadcast together"
msgstr ""
@@ -2700,7 +2715,7 @@ msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
-#: ports/stm32f4/common-hal/pulseio/PulseIn.c
+#: ports/stm/common-hal/pulseio/PulseIn.c
msgid "pop from an empty PulseIn"
msgstr ""
generated by cgit v1.2.3 (git 2.39.1) at 2026-08-08 15:56:57 +0000