diff options
Diffstat (limited to 'ports/atmel-samd/boards')
69 files changed, 1107 insertions, 98 deletions
diff --git a/ports/atmel-samd/boards/bdmicro_vina_m0/board.c b/ports/atmel-samd/boards/bdmicro_vina_d21/board.c index bd63baa6f..bd63baa6f 100644 --- a/ports/atmel-samd/boards/bdmicro_vina_m0/board.c +++ b/ports/atmel-samd/boards/bdmicro_vina_d21/board.c diff --git a/ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.h b/ports/atmel-samd/boards/bdmicro_vina_d21/mpconfigboard.h index 458b1e12a..f2332bbe5 100644 --- a/ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.h +++ b/ports/atmel-samd/boards/bdmicro_vina_d21/mpconfigboard.h @@ -1,34 +1,31 @@ -#define MICROPY_HW_BOARD_NAME "BDMICRO Vina M0" +#define MICROPY_HW_BOARD_NAME "BDMICRO VINA-D21" #define MICROPY_HW_MCU_NAME "samd21g18" -#define MICROPY_HW_LED_STATUS (&pin_PA28) -#define MICROPY_HW_LED_TX &pin_PA27 -#define MICROPY_HW_LED_RX &pin_PA31 - -// Clock rates are off: Salae reads 12MHz which is the limit even though we set it to the safer 8MHz. -#define SPI_FLASH_BAUDRATE (8000000) - -#define SPI_FLASH_MOSI_PIN &pin_PB22 -#define SPI_FLASH_MISO_PIN &pin_PB03 -#define SPI_FLASH_SCK_PIN &pin_PB23 -#define SPI_FLASH_CS_PIN &pin_PA13 - // These are pins not to reset. #define MICROPY_PORT_A (0) #define MICROPY_PORT_B (0) #define MICROPY_PORT_C (0) -#define BOARD_HAS_CRYSTAL 0 +#define SPI_FLASH_CS_PIN &pin_PA13 +#define SPI_FLASH_MISO_PIN &pin_PB03 +#define SPI_FLASH_MOSI_PIN &pin_PB22 +#define SPI_FLASH_SCK_PIN &pin_PB23 -#define DEFAULT_I2C_BUS_SCL (&pin_PA23) -#define DEFAULT_I2C_BUS_SDA (&pin_PA22) +// Clock rates are off: Salae reads 12MHz which is the limit even though we set it to the safer 8MHz. +#define SPI_FLASH_BAUDRATE (8000000) -#define DEFAULT_SPI_BUS_SCK (&pin_PB11) -#define DEFAULT_SPI_BUS_MOSI (&pin_PB10) -#define DEFAULT_SPI_BUS_MISO (&pin_PA12) +#define BOARD_HAS_CRYSTAL 1 -#define DEFAULT_UART_BUS_RX (&pin_PA11) #define DEFAULT_UART_BUS_TX (&pin_PA10) +#define DEFAULT_UART_BUS_RX (&pin_PA11) +#define DEFAULT_SPI_BUS_MISO (&pin_PA12) +#define DEFAULT_I2C_BUS_SDA (&pin_PA22) +#define DEFAULT_I2C_BUS_SCL (&pin_PA23) +#define MICROPY_HW_LED_TX (&pin_PA27) +#define MICROPY_HW_LED_STATUS (&pin_PA28) +#define MICROPY_HW_LED_RX (&pin_PA31) +#define DEFAULT_SPI_BUS_MOSI (&pin_PB10) +#define DEFAULT_SPI_BUS_SCK (&pin_PB11) // USB is always used internally so skip the pin objects for it. #define IGNORE_PIN_PA24 1 diff --git a/ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.mk b/ports/atmel-samd/boards/bdmicro_vina_d21/mpconfigboard.mk index b7ad47ff2..a9885d064 100644 --- a/ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.mk +++ b/ports/atmel-samd/boards/bdmicro_vina_d21/mpconfigboard.mk @@ -1,19 +1,22 @@ USB_VID = 0x31e2 -USB_PID = 0x2002 -USB_PRODUCT = "Vina M0" +USB_PID = 0x2001 +USB_PRODUCT = "VINA-D21" USB_MANUFACTURER = "BDMICRO LLC" CHIP_VARIANT = SAMD21G18A CHIP_FAMILY = samd21 SPI_FLASH_FILESYSTEM = 1 -EXTERNAL_FLASH_DEVICE_COUNT = 1 -EXTERNAL_FLASH_DEVICES = "MX25L51245G" +EXTERNAL_FLASH_DEVICE_COUNT = 2 +EXTERNAL_FLASH_DEVICES = "MX25L51245G","GD25S512MD" LONGINT_IMPL = MPZ CIRCUITPY_BITBANGIO = 0 +CIRCUITPY_COUNTIO = 0 CIRCUITPY_I2CPERIPHERAL = 0 CIRCUITPY_VECTORIO = 0 -CFLAGS_INLINE_LIMIT = 50 +CFLAGS_INLINE_LIMIT = 60 SUPEROPT_GC = 0 + +CFLAGS_BOARD = --param max-inline-insns-auto=15 diff --git a/ports/atmel-samd/boards/bdmicro_vina_m0/pins.c b/ports/atmel-samd/boards/bdmicro_vina_d21/pins.c index 0ebceb28d..323f71dec 100644 --- a/ports/atmel-samd/boards/bdmicro_vina_m0/pins.c +++ b/ports/atmel-samd/boards/bdmicro_vina_d21/pins.c @@ -1,8 +1,6 @@ #include "shared-bindings/board/__init__.h" STATIC const mp_rom_map_elem_t board_global_dict_table[] = { - { MP_ROM_QSTR(MP_QSTR_RTC_INT), MP_ROM_PTR(&pin_PA00) }, - { MP_ROM_QSTR(MP_QSTR_RTC_CLK), MP_ROM_PTR(&pin_PA01) }, { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA02) }, { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PB08) }, { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PB09) }, @@ -13,8 +11,11 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PA11) }, { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PA10) }, { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PA10) }, + { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA18) }, + { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA16) }, + { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_PA19) }, + { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA17) }, { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PA14) }, - { MP_ROM_QSTR(MP_QSTR_RTC_TS), MP_ROM_PTR(&pin_PA14) }, { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PA09) }, { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PA08) }, { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_PA15) }, @@ -22,16 +23,14 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_PA21) }, { MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_PA06) }, { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_PA07) }, - { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA18) }, - { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA16) }, - { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_PA19) }, - { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA17) }, - { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA22) }, - { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA23) }, - { MP_ROM_QSTR(MP_QSTR_PGM_LED), MP_ROM_PTR(&pin_PA28) }, - { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PB11) }, - { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PB10) }, + { MP_ROM_QSTR(MP_QSTR_LED_STATUS), MP_ROM_PTR(&pin_PA28) }, + { MP_ROM_QSTR(MP_QSTR_LED_TX), MP_ROM_PTR(&pin_PA27) }, { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PA12) }, + { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PB10) }, + { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PB11) }, + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA23) }, + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA22) }, + { MP_ROM_QSTR(MP_QSTR_LED_RX), MP_ROM_PTR(&pin_PA31) }, { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, diff --git a/ports/atmel-samd/boards/bdmicro_vina_d51/board.c b/ports/atmel-samd/boards/bdmicro_vina_d51/board.c new file mode 100644 index 000000000..bd63baa6f --- /dev/null +++ b/ports/atmel-samd/boards/bdmicro_vina_d51/board.c @@ -0,0 +1,48 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" +#include "mpconfigboard.h" + +void board_init(void) +{ + // struct port_config pin_conf; + // port_get_config_defaults(&pin_conf); + // + // pin_conf.direction = PORT_PIN_DIR_OUTPUT; + // port_pin_set_config(MICROPY_HW_LED_TX, &pin_conf); + // port_pin_set_output_level(MICROPY_HW_LED_TX, true); + // + // port_pin_set_config(MICROPY_HW_LED_RX, &pin_conf); + // port_pin_set_output_level(MICROPY_HW_LED_RX, true); +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { +} diff --git a/ports/atmel-samd/boards/bdmicro_vina_d51/mpconfigboard.h b/ports/atmel-samd/boards/bdmicro_vina_d51/mpconfigboard.h new file mode 100644 index 000000000..8b015df05 --- /dev/null +++ b/ports/atmel-samd/boards/bdmicro_vina_d51/mpconfigboard.h @@ -0,0 +1,28 @@ +#define MICROPY_HW_BOARD_NAME "BDMICRO VINA-D51" +#define MICROPY_HW_MCU_NAME "samd51n20" + +#define CIRCUITPY_MCU_FAMILY samd51 + +// These are pins not to reset. +// Don't reset QSPI data pins +#define MICROPY_PORT_A (PORT_PA08 | PORT_PA09 | PORT_PA10 | PORT_PA11) +#define MICROPY_PORT_B (PORT_PB10 | PORT_PB11) +#define MICROPY_PORT_C (0) +#define MICROPY_PORT_D (0) + +#define BOARD_HAS_CRYSTAL 1 + +#define DEFAULT_I2C_BUS_SCL (&pin_PA16) +#define DEFAULT_I2C_BUS_SDA (&pin_PA17) +#define DEFAULT_UART_BUS_RX (&pin_PB20) +#define DEFAULT_UART_BUS_TX (&pin_PB21) +#define DEFAULT_SPI_BUS_MISO (&pin_PB23) +#define DEFAULT_SPI_BUS_MOSI (&pin_PC27) +#define DEFAULT_SPI_BUS_SCK (&pin_PC28) +#define MICROPY_HW_LED_STATUS (&pin_PA23) +#define MICROPY_HW_LED_RX (&pin_PC05) +#define MICROPY_HW_LED_TX (&pin_PC06) + +// USB is always used internally so skip the pin objects for it. +#define IGNORE_PIN_PA24 1 +#define IGNORE_PIN_PA25 1 diff --git a/ports/atmel-samd/boards/bdmicro_vina_d51/mpconfigboard.mk b/ports/atmel-samd/boards/bdmicro_vina_d51/mpconfigboard.mk new file mode 100644 index 000000000..f1b2f4c1d --- /dev/null +++ b/ports/atmel-samd/boards/bdmicro_vina_d51/mpconfigboard.mk @@ -0,0 +1,12 @@ +USB_VID = 0x31e2 +USB_PID = 0x2011 +USB_PRODUCT = "VINA-D51" +USB_MANUFACTURER = "BDMICRO LLC" + +CHIP_VARIANT = SAMD51N20A +CHIP_FAMILY = samd51 + +QSPI_FLASH_FILESYSTEM = 1 +EXTERNAL_FLASH_DEVICE_COUNT = 2 +EXTERNAL_FLASH_DEVICES = "MX25L51245G","GD25S512MD" +LONGINT_IMPL = MPZ diff --git a/ports/atmel-samd/boards/bdmicro_vina_d51/pins.c b/ports/atmel-samd/boards/bdmicro_vina_d51/pins.c new file mode 100644 index 000000000..8eeab8a9a --- /dev/null +++ b/ports/atmel-samd/boards/bdmicro_vina_d51/pins.c @@ -0,0 +1,90 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA04) }, + { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA06) }, + { MP_ROM_QSTR(MP_QSTR_A10), MP_ROM_PTR(&pin_PB07) }, + { MP_ROM_QSTR(MP_QSTR_A11), MP_ROM_PTR(&pin_PC00) }, + { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA07) }, + { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PB08) }, + { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PB09) }, + { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PC02) }, + { MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_PC03) }, + { MP_ROM_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_PB04) }, + { MP_ROM_QSTR(MP_QSTR_A8), MP_ROM_PTR(&pin_PB05) }, + { MP_ROM_QSTR(MP_QSTR_A9), MP_ROM_PTR(&pin_PB06) }, + { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PB31) }, + { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PC16) }, + { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PC13) }, + { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA14) }, + { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_PA15) }, + { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PB12) }, + { MP_ROM_QSTR(MP_QSTR_D14), MP_ROM_PTR(&pin_PB13) }, + { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PC17) }, + { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PC18) }, + { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PC19) }, + { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_PC20) }, + { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_PC21) }, + { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_PB18) }, + { MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_PB19) }, + { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_PC12) }, + { MP_ROM_QSTR(MP_QSTR_DAC0), MP_ROM_PTR(&pin_PA02) }, + { MP_ROM_QSTR(MP_QSTR_DAC1), MP_ROM_PTR(&pin_PA05) }, + { MP_ROM_QSTR(MP_QSTR_ESP01_EN), MP_ROM_PTR(&pin_PC15) }, + { MP_ROM_QSTR(MP_QSTR_E5), MP_ROM_PTR(&pin_PC15) }, + { MP_ROM_QSTR(MP_QSTR_ESP01_GPIO0), MP_ROM_PTR(&pin_PA18) }, + { MP_ROM_QSTR(MP_QSTR_E3), MP_ROM_PTR(&pin_PA18) }, + { MP_ROM_QSTR(MP_QSTR_ESP01_GPIO2), MP_ROM_PTR(&pin_PA19) }, + { MP_ROM_QSTR(MP_QSTR_E4), MP_ROM_PTR(&pin_PA19) }, + { MP_ROM_QSTR(MP_QSTR_ESP01_RESET), MP_ROM_PTR(&pin_PC14) }, + { MP_ROM_QSTR(MP_QSTR_E6), MP_ROM_PTR(&pin_PC14) }, + { MP_ROM_QSTR(MP_QSTR_ESP01_RX), MP_ROM_PTR(&pin_PA12) }, + { MP_ROM_QSTR(MP_QSTR_UART3_RX), MP_ROM_PTR(&pin_PA12) }, + { MP_ROM_QSTR(MP_QSTR_I2C3_SCL), MP_ROM_PTR(&pin_PA12) }, + { MP_ROM_QSTR(MP_QSTR_E2), MP_ROM_PTR(&pin_PA12) }, + { MP_ROM_QSTR(MP_QSTR_ESP01_TX), MP_ROM_PTR(&pin_PA13) }, + { MP_ROM_QSTR(MP_QSTR_UART3_TX), MP_ROM_PTR(&pin_PA13) }, + { MP_ROM_QSTR(MP_QSTR_I2C3_SDA), MP_ROM_PTR(&pin_PA13) }, + { MP_ROM_QSTR(MP_QSTR_E1), MP_ROM_PTR(&pin_PA13) }, + { MP_ROM_QSTR(MP_QSTR_I2C1_SCL), MP_ROM_PTR(&pin_PA16) }, + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA16) }, + { MP_ROM_QSTR(MP_QSTR_I2C1_SDA), MP_ROM_PTR(&pin_PA17) }, + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA17) }, + { MP_ROM_QSTR(MP_QSTR_I2S_FS_0), MP_ROM_PTR(&pin_PA20) }, + { MP_ROM_QSTR(MP_QSTR_I2S_MCK_0), MP_ROM_PTR(&pin_PB17) }, + { MP_ROM_QSTR(MP_QSTR_I2S_SCK_0), MP_ROM_PTR(&pin_PB16) }, + { MP_ROM_QSTR(MP_QSTR_I2S_SDI), MP_ROM_PTR(&pin_PA22) }, + { MP_ROM_QSTR(MP_QSTR_I2S_SDO), MP_ROM_PTR(&pin_PA21) }, + { MP_ROM_QSTR(MP_QSTR_LED_B), MP_ROM_PTR(&pin_PA23) }, + { MP_ROM_QSTR(MP_QSTR_LED_STATUS), MP_ROM_PTR(&pin_PA23) }, + { MP_ROM_QSTR(MP_QSTR_LED_G), MP_ROM_PTR(&pin_PB15) }, + { MP_ROM_QSTR(MP_QSTR_LED_R), MP_ROM_PTR(&pin_PB14) }, + { MP_ROM_QSTR(MP_QSTR_LED_RX), MP_ROM_PTR(&pin_PC05) }, + { MP_ROM_QSTR(MP_QSTR_LED_TX), MP_ROM_PTR(&pin_PC06) }, + { MP_ROM_QSTR(MP_QSTR_RS485_RE), MP_ROM_PTR(&pin_PB01) }, + { MP_ROM_QSTR(MP_QSTR_RS485_RX), MP_ROM_PTR(&pin_PB03) }, + { MP_ROM_QSTR(MP_QSTR_RS485_TE), MP_ROM_PTR(&pin_PB00) }, + { MP_ROM_QSTR(MP_QSTR_RS485_TX), MP_ROM_PTR(&pin_PB02) }, + { MP_ROM_QSTR(MP_QSTR_SPI_MISO), MP_ROM_PTR(&pin_PB23) }, + { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PB23) }, + { MP_ROM_QSTR(MP_QSTR_SPI_MOSI), MP_ROM_PTR(&pin_PC27) }, + { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PC27) }, + { MP_ROM_QSTR(MP_QSTR_SPI_SCK), MP_ROM_PTR(&pin_PC28) }, + { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PC28) }, + { MP_ROM_QSTR(MP_QSTR_SPI_SS), MP_ROM_PTR(&pin_PB22) }, + { MP_ROM_QSTR(MP_QSTR_SS), MP_ROM_PTR(&pin_PB22) }, + { MP_ROM_QSTR(MP_QSTR_UART1_CTS), MP_ROM_PTR(&pin_PC25) }, + { MP_ROM_QSTR(MP_QSTR_UART1_RTS), MP_ROM_PTR(&pin_PC24) }, + { MP_ROM_QSTR(MP_QSTR_UART1_RX), MP_ROM_PTR(&pin_PB24) }, + { MP_ROM_QSTR(MP_QSTR_UART1_TX), MP_ROM_PTR(&pin_PB25) }, + { MP_ROM_QSTR(MP_QSTR_UART2_RX), MP_ROM_PTR(&pin_PB20) }, + { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PB20) }, + { MP_ROM_QSTR(MP_QSTR_I2C2_SCL), MP_ROM_PTR(&pin_PB20) }, + { MP_ROM_QSTR(MP_QSTR_UART2_TX), MP_ROM_PTR(&pin_PB21) }, + { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PB21) }, + { MP_ROM_QSTR(MP_QSTR_I2C2_SDA), MP_ROM_PTR(&pin_PB21) }, + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, + { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, + { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/atmel-samd/boards/circuitbrains_basic_m0/mpconfigboard.mk b/ports/atmel-samd/boards/circuitbrains_basic_m0/mpconfigboard.mk index 5656d4cb8..178258b6c 100755 --- a/ports/atmel-samd/boards/circuitbrains_basic_m0/mpconfigboard.mk +++ b/ports/atmel-samd/boards/circuitbrains_basic_m0/mpconfigboard.mk @@ -16,6 +16,7 @@ CIRCUITPY_COUNTIO = 0 CIRCUITPY_FREQUENCYIO = 0 CIRCUITPY_I2CPERIPHERAL = 0 CIRCUITPY_VECTORIO = 0 +MICROPY_PY_ASYNC_AWAIT = 0 SUPEROPT_GC = 0 diff --git a/ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h b/ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h index 12c48b1e3..4321335e5 100644 --- a/ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h +++ b/ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h @@ -25,7 +25,7 @@ #define CALIBRATE_CRYSTALLESS 1 // Explanation of how a user got into safe mode. -#define BOARD_USER_SAFE_MODE_ACTION "pressing both buttons at start up" +#define BOARD_USER_SAFE_MODE_ACTION translate("pressing both buttons at start up.\n") // Increase stack size slightly due to CPX library import nesting #define CIRCUITPY_DEFAULT_STACK_SIZE (4248) //divisible by 8 diff --git a/ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.mk b/ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.mk index 81391b953..13ec9e861 100644 --- a/ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.mk +++ b/ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.mk @@ -15,6 +15,7 @@ LONGINT_IMPL = MPZ CIRCUITPY_DISPLAYIO = 0 CIRCUITPY_FREQUENCYIO = 0 CIRCUITPY_I2CPERIPHERAL = 0 +MICROPY_PY_ASYNC_AWAIT = 0 SUPEROPT_GC = 0 CFLAGS_INLINE_LIMIT = 55 diff --git a/ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h b/ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h index 95b4ec110..5673be290 100644 --- a/ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h +++ b/ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h @@ -27,7 +27,7 @@ #define USER_NEOPIXELS_PIN (&pin_PB23) // Explanation of how a user got into safe mode. -#define BOARD_USER_SAFE_MODE_ACTION "pressing both buttons at start up" +#define BOARD_USER_SAFE_MODE_ACTION translate("pressing both buttons at start up.\n") // Increase stack size slightly due to CPX library import nesting #define CIRCUITPY_DEFAULT_STACK_SIZE (4248) // divisible by 8 diff --git a/ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h b/ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h index d478ea38b..fab235149 100644 --- a/ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h +++ b/ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h @@ -25,7 +25,7 @@ #define CALIBRATE_CRYSTALLESS 1 // Explanation of how a user got into safe mode. -#define BOARD_USER_SAFE_MODE_ACTION "pressing both buttons at start up" +#define BOARD_USER_SAFE_MODE_ACTION translate("pressing both buttons at start up.\n") // Increase stack size slightly due to CPX library import nesting. #define CIRCUITPY_DEFAULT_STACK_SIZE (4248) // divisible by 8 diff --git a/ports/atmel-samd/boards/common.template.ld b/ports/atmel-samd/boards/common.template.ld index 1054605c8..53c4cf5ee 100644 --- a/ports/atmel-samd/boards/common.template.ld +++ b/ports/atmel-samd/boards/common.template.ld @@ -43,6 +43,15 @@ SECTIONS _sidata = .; /* start of .data section */ } >FLASH_FIRMWARE + /* Data accessed by the CAN peripheral must be in the first 64kB RAM */ + /* place it at the very start of RAM, before the .data section */ + /* it is zeroed by reset_port */ + .canram (NOLOAD) : + { + . = ALIGN(4); + *(.canram) + } > RAM + /* This is the initialized data section The program executes knowing that the data is in the RAM but the loader puts the initial values in the FLASH_FIRMWARE (inidata). @@ -61,7 +70,7 @@ SECTIONS } >RAM /* Uninitialized data section */ - .bss : + .bss (NOLOAD) : { . = ALIGN(4); _sbss = .; diff --git a/ports/atmel-samd/boards/dynossat_edu_eps/board.c b/ports/atmel-samd/boards/dynossat_edu_eps/board.c new file mode 100644 index 000000000..c8e20206a --- /dev/null +++ b/ports/atmel-samd/boards/dynossat_edu_eps/board.c @@ -0,0 +1,38 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" + +void board_init(void) +{ +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { +} diff --git a/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.h b/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.h new file mode 100644 index 000000000..ef4fa8f99 --- /dev/null +++ b/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.h @@ -0,0 +1,40 @@ +#define MICROPY_HW_BOARD_NAME "DynOSSAT-EDU-EPS" +#define MICROPY_HW_MCU_NAME "samd21g18" + +#define MICROPY_HW_NEOPIXEL (&pin_PA06) + +#define SPI_FLASH_MOSI_PIN &pin_PA22 +#define SPI_FLASH_MISO_PIN &pin_PA21 +#define SPI_FLASH_SCK_PIN &pin_PA23 +#define SPI_FLASH_CS_PIN &pin_PA20 + +// These are pins not to reset. +#define MICROPY_PORT_A ( 0 ) +#define MICROPY_PORT_B ( 0 ) +#define MICROPY_PORT_C ( 0 ) + +#define BOARD_HAS_CRYSTAL 1 + +#define DEFAULT_I2C_BUS_SCL (&pin_PA09) +#define DEFAULT_I2C_BUS_SDA (&pin_PA08) + +#define DEFAULT_SPI_BUS_SCK (&pin_PB11) +#define DEFAULT_SPI_BUS_MOSI (&pin_PA12) +#define DEFAULT_SPI_BUS_MISO (&pin_PB10) + +#define DEFAULT_UART_BUS_RX (&pin_PA17) +#define DEFAULT_UART_BUS_TX (&pin_PA16) + +// USB is always used internally so skip the pin objects for it. +#define IGNORE_PIN_PA24 1 +#define IGNORE_PIN_PA25 1 +#define IGNORE_PIN_PA03 1 +#define IGNORE_PIN_PA13 1 +#define IGNORE_PIN_PA14 1 +#define IGNORE_PIN_PA15 1 +#define IGNORE_PIN_PA18 1 +#define IGNORE_PIN_PA27 1 +#define IGNORE_PIN_PA28 1 +#define IGNORE_PIN_PB08 1 +#define IGNORE_PIN_PB22 1 +#define IGNORE_PIN_PB23 1 diff --git a/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.mk b/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.mk new file mode 100644 index 000000000..3c0cc07be --- /dev/null +++ b/ports/atmel-samd/boards/dynossat_edu_eps/mpconfigboard.mk @@ -0,0 +1,23 @@ +USB_VID = 0x04D8 +USB_PID = 0xEAD1 + +USB_PRODUCT = "DynOSSAT-EDU-EPS-v1.0" +USB_MANUFACTURER = "BH Dynamics" + +CHIP_VARIANT = SAMD21G18A +CHIP_FAMILY = samd21 + +SPI_FLASH_FILESYSTEM = 1 +EXTERNAL_FLASH_DEVICE_COUNT = 1 +EXTERNAL_FLASH_DEVICES = "GD25Q32C" +LONGINT_IMPL = MPZ + +CIRCUITPY_BITBANGIO = 0 +CIRCUITPY_FREQUENCYIO = 0 +CIRCUITPY_COUNTIO = 0 +CIRCUITPY_I2CPERIPHERAL = 0 +CIRCUITPY_VECTORIO = 0 + +CFLAGS_INLINE_LIMIT = 60 + +SUPEROPT_GC = 0 diff --git a/ports/atmel-samd/boards/dynossat_edu_eps/pins.c b/ports/atmel-samd/boards/dynossat_edu_eps/pins.c new file mode 100644 index 000000000..a910311d4 --- /dev/null +++ b/ports/atmel-samd/boards/dynossat_edu_eps/pins.c @@ -0,0 +1,32 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PB11) }, + { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA12) }, + { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PB10) }, + { MP_ROM_QSTR(MP_QSTR_D30), MP_ROM_PTR(&pin_PA30) }, + { MP_ROM_QSTR(MP_QSTR_D31), MP_ROM_PTR(&pin_PA31) }, + { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PA17) }, + { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PA07) }, + { MP_ROM_QSTR(MP_QSTR_OVTEMP), MP_ROM_PTR(&pin_PA07) }, + { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PA16) }, + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA08) }, + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA09) }, + { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PA11) }, + { MP_ROM_QSTR(MP_QSTR_SAT_RESET), MP_ROM_PTR(&pin_PA11) }, + { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PA10) }, + { MP_ROM_QSTR(MP_QSTR_SAT_PWR_ENABLE), MP_ROM_PTR(&pin_PA10) }, + { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PA19) }, + { MP_ROM_QSTR(MP_QSTR_INT_IMU_OBC), MP_ROM_PTR(&pin_PA19) }, + { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PB03) }, + { MP_ROM_QSTR(MP_QSTR_PWRMON_SDA), MP_ROM_PTR(&pin_PA04) }, + { MP_ROM_QSTR(MP_QSTR_PWRMON_SCL), MP_ROM_PTR(&pin_PA05) }, + { MP_ROM_QSTR(MP_QSTR_PWRMON_ALERT), MP_ROM_PTR(&pin_PB03) }, + { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA06) }, + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA06) }, + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, + { MP_ROM_QSTR(MP_QSTR_I2C_MONITOR), MP_ROM_PTR(&board_i2c_obj) }, + { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, + { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/atmel-samd/boards/dynossat_edu_obc/board.c b/ports/atmel-samd/boards/dynossat_edu_obc/board.c new file mode 100644 index 000000000..c8e20206a --- /dev/null +++ b/ports/atmel-samd/boards/dynossat_edu_obc/board.c @@ -0,0 +1,38 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" + +void board_init(void) +{ +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { +} diff --git a/ports/atmel-samd/boards/dynossat_edu_obc/mpconfigboard.h b/ports/atmel-samd/boards/dynossat_edu_obc/mpconfigboard.h new file mode 100644 index 000000000..d7df8db74 --- /dev/null +++ b/ports/atmel-samd/boards/dynossat_edu_obc/mpconfigboard.h @@ -0,0 +1,44 @@ +#define MICROPY_HW_BOARD_NAME "DynOSSAT-EDU-OBC" +#define MICROPY_HW_MCU_NAME "samd51j20" + +#define MICROPY_HW_NEOPIXEL (&pin_PA08) + +#define SPI_FLASH_MOSI_PIN &pin_PA16 +#define SPI_FLASH_MISO_PIN &pin_PA18 +#define SPI_FLASH_SCK_PIN &pin_PA17 +#define SPI_FLASH_CS_PIN &pin_PA19 + +// These are pins not to reset. +#define MICROPY_PORT_A ( PORT_PA16 | PORT_PA17 | PORT_PA18 | PORT_PA19 ) +#define MICROPY_PORT_B ( 0 ) +#define MICROPY_PORT_C ( 0 ) +#define MICROPY_PORT_D ( 0 ) + +#define BOARD_HAS_CRYSTAL 1 + +#define DEFAULT_I2C_BUS_SCL (&pin_PB13) +#define DEFAULT_I2C_BUS_SDA (&pin_PB12) + +#define DEFAULT_SPI_BUS_SCK (&pin_PB03) +#define DEFAULT_SPI_BUS_MOSI (&pin_PB02) +#define DEFAULT_SPI_BUS_MISO (&pin_PB01) + +#define DEFAULT_UART_BUS_RX (&pin_PA23) +#define DEFAULT_UART_BUS_TX (&pin_PA22) + +// USB is always used internally so skip the pin objects for it. +#define IGNORE_PIN_PA24 1 +#define IGNORE_PIN_PA25 1 +#define IGNORE_PIN_PA02 1 +#define IGNORE_PIN_PA13 1 +#define IGNORE_PIN_PA14 1 +#define IGNORE_PIN_PA20 1 +#define IGNORE_PIN_PA21 1 +#define IGNORE_PIN_PA27 1 +#define IGNORE_PIN_PB00 1 +#define IGNORE_PIN_PB04 1 +#define IGNORE_PIN_PB05 1 +#define IGNORE_PIN_PB16 1 +#define IGNORE_PIN_PB17 1 +#define IGNORE_PIN_PB23 1 +#define IGNORE_PIN_PB31 1 diff --git a/ports/atmel-samd/boards/dynossat_edu_obc/mpconfigboard.mk b/ports/atmel-samd/boards/dynossat_edu_obc/mpconfigboard.mk new file mode 100644 index 000000000..360940cf1 --- /dev/null +++ b/ports/atmel-samd/boards/dynossat_edu_obc/mpconfigboard.mk @@ -0,0 +1,16 @@ +USB_VID = 0x04D8 +USB_PID = 0xEAD2 + +USB_PRODUCT = "DynOSSAT-EDU-OBC-v1.0" +USB_MANUFACTURER = "BH Dynamics" + +CHIP_VARIANT = SAMD51J20A +CHIP_FAMILY = samd51 + +SPI_FLASH_FILESYSTEM = 1 +EXTERNAL_FLASH_DEVICE_COUNT = 1 +EXTERNAL_FLASH_DEVICES = "GD25Q32C" +LONGINT_IMPL = MPZ + +CFLAGS_INLINE_LIMIT = 60 +SUPEROPT_GC = 0 diff --git a/ports/atmel-samd/boards/dynossat_edu_obc/pins.c b/ports/atmel-samd/boards/dynossat_edu_obc/pins.c new file mode 100644 index 000000000..a560360f7 --- /dev/null +++ b/ports/atmel-samd/boards/dynossat_edu_obc/pins.c @@ -0,0 +1,40 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA07) }, + { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA06) }, + { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA05) }, + { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PA04) }, + { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PB09) }, + { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PB08) }, + { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PB03) }, + { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PB02) }, + { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PB01) }, + { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PB15) }, + { MP_ROM_QSTR(MP_QSTR_D30), MP_ROM_PTR(&pin_PA22) }, + { MP_ROM_QSTR(MP_QSTR_D31), MP_ROM_PTR(&pin_PA23) }, + { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PA23) }, + { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PB14) }, + { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PA22) }, + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PB12) }, + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PB13) }, + { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PB11) }, + { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PB10) }, + { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PA11) }, + { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_PA10) }, + { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_PA09) }, + { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_PB07) }, + { MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_PB06) }, + { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_PB30) }, + { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA08) }, + { MP_ROM_QSTR(MP_QSTR_D32), MP_ROM_PTR(&pin_PA30) }, + { MP_ROM_QSTR(MP_QSTR_D33), MP_ROM_PTR(&pin_PA31) }, + { MP_ROM_QSTR(MP_QSTR_SD_CS), MP_ROM_PTR(&pin_PB22) }, + { MP_ROM_QSTR(MP_QSTR_INT_IMU), MP_ROM_PTR(&pin_PA12) }, + { MP_ROM_QSTR(MP_QSTR_SAT_POWER), MP_ROM_PTR(&pin_PA15) }, + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA08) }, + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, + { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, + { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h b/ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h index 3a984188f..c4c8c4f3c 100644 --- a/ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h +++ b/ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h @@ -11,7 +11,7 @@ #define CALIBRATE_CRYSTALLESS 1 // Explanation of how a user got into safe mode. -#define BOARD_USER_SAFE_MODE_ACTION "pressing both buttons at start up" +#define BOARD_USER_SAFE_MODE_ACTION translate("pressing both buttons at start up.\n") #define DEFAULT_I2C_BUS_SCL (&pin_PA08) #define DEFAULT_I2C_BUS_SDA (&pin_PA09) diff --git a/ports/atmel-samd/boards/feather_m0_adalogger/mpconfigboard.mk b/ports/atmel-samd/boards/feather_m0_adalogger/mpconfigboard.mk index 54c5bff6a..143910318 100644 --- a/ports/atmel-samd/boards/feather_m0_adalogger/mpconfigboard.mk +++ b/ports/atmel-samd/boards/feather_m0_adalogger/mpconfigboard.mk @@ -1,5 +1,5 @@ USB_VID = 0x239A -USB_PID = 0x8015 +USB_PID = 0x80D3 USB_PRODUCT = "Feather M0 Adalogger" USB_MANUFACTURER = "Adafruit Industries LLC" diff --git a/ports/atmel-samd/boards/feather_m0_express_crickit/mpconfigboard.mk b/ports/atmel-samd/boards/feather_m0_express_crickit/mpconfigboard.mk index 9e27ec7b4..5624144e8 100644 --- a/ports/atmel-samd/boards/feather_m0_express_crickit/mpconfigboard.mk +++ b/ports/atmel-samd/boards/feather_m0_express_crickit/mpconfigboard.mk @@ -1,5 +1,5 @@ USB_VID = 0x239A -USB_PID = 0x8023 +USB_PID = 0x80D1 USB_PRODUCT = "Feather M0 Express" USB_MANUFACTURER = "Adafruit Industries LLC" diff --git a/ports/atmel-samd/boards/feather_m0_rfm69/mpconfigboard.mk b/ports/atmel-samd/boards/feather_m0_rfm69/mpconfigboard.mk index b589ae766..d746cdf81 100644 --- a/ports/atmel-samd/boards/feather_m0_rfm69/mpconfigboard.mk +++ b/ports/atmel-samd/boards/feather_m0_rfm69/mpconfigboard.mk @@ -1,5 +1,5 @@ USB_VID = 0x239A -USB_PID = 0x8015 +USB_PID = 0x80D2 USB_PRODUCT = "Feather M0 RFM69" USB_MANUFACTURER = "Adafruit Industries LLC" @@ -12,7 +12,7 @@ CIRCUITPY_FULL_BUILD = 0 # A number of modules are removed for RFM69 to make room for frozen libraries. # Many I/O functions are not available. -CIRCUITPY_ANALOGIO = 0 +CIRCUITPY_ANALOGIO = 1 CIRCUITPY_PULSEIO = 0 CIRCUITPY_NEOPIXEL_WRITE = 1 CIRCUITPY_ROTARYIO = 0 @@ -22,6 +22,7 @@ CIRCUITPY_USB_MIDI = 0 CIRCUITPY_USB_HID = 0 CIRCUITPY_TOUCHIO = 0 CFLAGS_INLINE_LIMIT = 35 + # Make more room. SUPEROPT_GC = 0 diff --git a/ports/atmel-samd/boards/feather_m0_rfm9x/mpconfigboard.mk b/ports/atmel-samd/boards/feather_m0_rfm9x/mpconfigboard.mk index 512bc533c..d37334688 100644 --- a/ports/atmel-samd/boards/feather_m0_rfm9x/mpconfigboard.mk +++ b/ports/atmel-samd/boards/feather_m0_rfm9x/mpconfigboard.mk @@ -1,5 +1,5 @@ USB_VID = 0x239A -USB_PID = 0x8015 +USB_PID = 0x80D4 USB_PRODUCT = "Feather M0 RFM9x" USB_MANUFACTURER = "Adafruit Industries LLC" @@ -13,7 +13,7 @@ CIRCUITPY_FULL_BUILD = 0 # A number of modules are removed for RFM9x to make room for frozen libraries. # Many I/O functions are not available. -CIRCUITPY_ANALOGIO = 0 +CIRCUITPY_ANALOGIO = 1 CIRCUITPY_PULSEIO = 0 CIRCUITPY_NEOPIXEL_WRITE = 1 CIRCUITPY_ROTARYIO = 0 @@ -22,6 +22,7 @@ CIRCUITPY_SAMD = 0 CIRCUITPY_USB_MIDI = 0 CIRCUITPY_USB_HID = 0 CIRCUITPY_TOUCHIO = 0 + CFLAGS_INLINE_LIMIT = 35 # Make more room. SUPEROPT_GC = 0 diff --git a/ports/atmel-samd/boards/feather_m4_can/board.c b/ports/atmel-samd/boards/feather_m4_can/board.c new file mode 100644 index 000000000..8096b9b8e --- /dev/null +++ b/ports/atmel-samd/boards/feather_m4_can/board.c @@ -0,0 +1,38 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" +#include "mpconfigboard.h" + +void board_init(void) { +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { +} diff --git a/ports/atmel-samd/boards/feather_m4_can/mpconfigboard.h b/ports/atmel-samd/boards/feather_m4_can/mpconfigboard.h new file mode 100644 index 000000000..20c4670e2 --- /dev/null +++ b/ports/atmel-samd/boards/feather_m4_can/mpconfigboard.h @@ -0,0 +1,35 @@ +#define MICROPY_HW_BOARD_NAME "Adafruit Feather M4 CAN" +#define MICROPY_HW_MCU_NAME "same51j19a" + +#define CIRCUITPY_MCU_FAMILY samd51 + +// Rev E + +#define MICROPY_HW_LED_STATUS (&pin_PA23) +#define MICROPY_HW_NEOPIXEL (&pin_PB03) + +// These are pins not to reset. +// QSPI Data pins +#define MICROPY_PORT_A (PORT_PA08 | PORT_PA09 | PORT_PA10 | PORT_PA11) +// QSPI CS, QSPI SCK and NeoPixel pin +#define MICROPY_PORT_B (PORT_PB03 | PORT_PB10 | PORT_PB11) +#define MICROPY_PORT_C (0) +#define MICROPY_PORT_D (0) + +#define EXTERNAL_FLASH_QSPI_DUAL + +#define BOARD_HAS_CRYSTAL 1 + +#define DEFAULT_I2C_BUS_SCL (&pin_PA13) +#define DEFAULT_I2C_BUS_SDA (&pin_PA12) + +#define DEFAULT_SPI_BUS_SCK (&pin_PA17) +#define DEFAULT_SPI_BUS_MOSI (&pin_PB23) +#define DEFAULT_SPI_BUS_MISO (&pin_PB22) + +#define DEFAULT_UART_BUS_RX (&pin_PB17) +#define DEFAULT_UART_BUS_TX (&pin_PB16) + +// USB is always used internally so skip the pin objects for it. +#define IGNORE_PIN_PA24 1 +#define IGNORE_PIN_PA25 1 diff --git a/ports/atmel-samd/boards/feather_m4_can/mpconfigboard.mk b/ports/atmel-samd/boards/feather_m4_can/mpconfigboard.mk new file mode 100644 index 000000000..345ac33c5 --- /dev/null +++ b/ports/atmel-samd/boards/feather_m4_can/mpconfigboard.mk @@ -0,0 +1,15 @@ +USB_VID = 0x239A +USB_PID = 0x80CE +USB_PRODUCT = "Feather M4 CAN" +USB_MANUFACTURER = "Adafruit Industries LLC" + +CHIP_VARIANT = SAME51J19A +CHIP_FAMILY = same51 + +QSPI_FLASH_FILESYSTEM = 1 +EXTERNAL_FLASH_DEVICE_COUNT = 1 +EXTERNAL_FLASH_DEVICES = GD25Q16C +LONGINT_IMPL = MPZ + +CIRCUITPY_VECTORIO = 1 +CIRCUITPY_CANIO = 1 diff --git a/ports/atmel-samd/boards/feather_m4_can/pins.c b/ports/atmel-samd/boards/feather_m4_can/pins.c new file mode 100644 index 000000000..015047330 --- /dev/null +++ b/ports/atmel-samd/boards/feather_m4_can/pins.c @@ -0,0 +1,65 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA02) }, + { MP_ROM_QSTR(MP_QSTR_D14), MP_ROM_PTR(&pin_PA02) }, + + { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA05) }, + { MP_ROM_QSTR(MP_QSTR_D15), MP_ROM_PTR(&pin_PA05) }, + + { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PB08) }, + { MP_ROM_QSTR(MP_QSTR_D16), MP_ROM_PTR(&pin_PB08) }, + + { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PB09) }, + { MP_ROM_QSTR(MP_QSTR_D17), MP_ROM_PTR(&pin_PB09) }, + + { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA04) }, + { MP_ROM_QSTR(MP_QSTR_D18), MP_ROM_PTR(&pin_PA04) }, + + { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PA06) }, + { MP_ROM_QSTR(MP_QSTR_D19), MP_ROM_PTR(&pin_PA06) }, + + { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA17) }, + { MP_ROM_QSTR(MP_QSTR_D25), MP_ROM_PTR(&pin_PA17) }, + + { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PB23) }, + { MP_ROM_QSTR(MP_QSTR_D24), MP_ROM_PTR(&pin_PB23) }, + + { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PB22) }, + { MP_ROM_QSTR(MP_QSTR_D23), MP_ROM_PTR(&pin_PB22) }, + + { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PB17) }, + { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PB17) }, + + { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PB16) }, + { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PB16) }, + + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA12) }, + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA13) }, + + { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PA14) }, + { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_PA16) }, + { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_PA18) }, + { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_PA19) }, + { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA20) }, + { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA21) }, + { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_PA22) }, + { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA23) }, + + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PB02) }, + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL_POWER), MP_ROM_PTR(&pin_PB03) }, + + { MP_ROM_QSTR(MP_QSTR_VOLTAGE_MONITOR), MP_ROM_PTR(&pin_PB00) }, + { MP_ROM_QSTR(MP_QSTR_BATTERY), MP_ROM_PTR(&pin_PB00) }, + + { MP_ROM_QSTR(MP_QSTR_BOOST_ENABLE), MP_ROM_PTR(&pin_PB13) }, + + { MP_OBJ_NEW_QSTR(MP_QSTR_CAN_RX), MP_ROM_PTR(&pin_PB15) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_CAN_TX), MP_ROM_PTR(&pin_PB14) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_CAN_STANDBY), MP_ROM_PTR(&pin_PB12) }, + + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, + { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, + { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/atmel-samd/boards/feather_m4_express/mpconfigboard.h b/ports/atmel-samd/boards/feather_m4_express/mpconfigboard.h index ba16d17ee..a57b18e24 100644 --- a/ports/atmel-samd/boards/feather_m4_express/mpconfigboard.h +++ b/ports/atmel-samd/boards/feather_m4_express/mpconfigboard.h @@ -16,8 +16,6 @@ #define MICROPY_PORT_C (0) #define MICROPY_PORT_D (0) -#define EXTERNAL_FLASH_QSPI_DUAL - #define BOARD_HAS_CRYSTAL 1 #define DEFAULT_I2C_BUS_SCL (&pin_PA13) diff --git a/ports/atmel-samd/boards/feather_radiofruit_zigbee/mpconfigboard.mk b/ports/atmel-samd/boards/feather_radiofruit_zigbee/mpconfigboard.mk index 754594f34..9f9bb0501 100755 --- a/ports/atmel-samd/boards/feather_radiofruit_zigbee/mpconfigboard.mk +++ b/ports/atmel-samd/boards/feather_radiofruit_zigbee/mpconfigboard.mk @@ -1,5 +1,5 @@ USB_VID = 0x239A -USB_PID = 0x8023 +USB_PID = 0x80D0 USB_PRODUCT = "Feather RadioFruit Zigbee" USB_MANUFACTURER = "Adafruit Industries LLC" diff --git a/ports/atmel-samd/boards/hallowing_m0_express/board.c b/ports/atmel-samd/boards/hallowing_m0_express/board.c index 4717e6ceb..14a2bdb81 100644 --- a/ports/atmel-samd/boards/hallowing_m0_express/board.c +++ b/ports/atmel-samd/boards/hallowing_m0_express/board.c @@ -110,7 +110,8 @@ void board_init(void) { false, // data_as_commands true, // auto_refresh 60, // native_frames_per_second - true); // backlight_on_high + true, // backlight_on_high + false); // not SH1107 } bool board_requests_safe_mode(void) { diff --git a/ports/atmel-samd/boards/hallowing_m4_express/board.c b/ports/atmel-samd/boards/hallowing_m4_express/board.c index 7da1d8128..61e797d65 100644 --- a/ports/atmel-samd/boards/hallowing_m4_express/board.c +++ b/ports/atmel-samd/boards/hallowing_m4_express/board.c @@ -91,7 +91,8 @@ void board_init(void) { false, // data_as_commands true, // auto_refresh 60, // native_frames_per_second - true); // backlight_on_high + true, // backlight_on_high + false); // not SH1107 } bool board_requests_safe_mode(void) { diff --git a/ports/atmel-samd/boards/kicksat-sprite/mpconfigboard.mk b/ports/atmel-samd/boards/kicksat-sprite/mpconfigboard.mk index 18cef738e..249265151 100644 --- a/ports/atmel-samd/boards/kicksat-sprite/mpconfigboard.mk +++ b/ports/atmel-samd/boards/kicksat-sprite/mpconfigboard.mk @@ -11,12 +11,12 @@ LONGINT_IMPL = MPZ # Not needed. CIRCUITPY_AUDIOBUSIO = 0 -CIRCUITPY_FRAMEBUFFERIO = 0 +CIRCUITPY_AUDIOMP3 = 0 +CIRCUITPY_BLEIO_HCI = 0 CIRCUITPY_DISPLAYIO = 0 -CIRCUITPY_RGBMATRIX = 0 +CIRCUITPY_FRAMEBUFFERIO = 0 CIRCUITPY_PS2IO = 0 -CIRCUITPY_AUDIOMP3 = 0 - +CIRCUITPY_RGBMATRIX = 0 CIRCUITPY_ULAB = 0 # Override optimization to keep binary small diff --git a/ports/atmel-samd/boards/matrixportal_m4/mpconfigboard.h b/ports/atmel-samd/boards/matrixportal_m4/mpconfigboard.h index 0368d577b..475752afb 100644 --- a/ports/atmel-samd/boards/matrixportal_m4/mpconfigboard.h +++ b/ports/atmel-samd/boards/matrixportal_m4/mpconfigboard.h @@ -9,14 +9,14 @@ // These are pins not to reset. // QSPI Data pins, PA23 is NeoPixel -#define MICROPY_PORT_A (PORT_PA08 | PORT_PA09 | PORT_PA10 | PORT_PA11 | PA23) +#define MICROPY_PORT_A (PORT_PA08 | PORT_PA09 | PORT_PA10 | PORT_PA11 | PORT_PA23) // QSPI CS, QSPI SCK #define MICROPY_PORT_B (PORT_PB10 | PORT_PB11) #define MICROPY_PORT_C (0) #define MICROPY_PORT_D (0) -#define DEFAULT_I2C_BUS_SCL (&pin_PB03) -#define DEFAULT_I2C_BUS_SDA (&pin_PB02) +#define DEFAULT_I2C_BUS_SCL (&pin_PB30) +#define DEFAULT_I2C_BUS_SDA (&pin_PB31) #define DEFAULT_SPI_BUS_SCK (&pin_PA16) #define DEFAULT_SPI_BUS_MOSI (&pin_PA19) diff --git a/ports/atmel-samd/boards/matrixportal_m4/pins.c b/ports/atmel-samd/boards/matrixportal_m4/pins.c index 34865597b..1f9956d9e 100644 --- a/ports/atmel-samd/boards/matrixportal_m4/pins.c +++ b/ports/atmel-samd/boards/matrixportal_m4/pins.c @@ -16,8 +16,8 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_BUSY), MP_ROM_PTR(&pin_PA22) }, { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_RESET), MP_ROM_PTR(&pin_PA21) }, { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_RTS), MP_ROM_PTR(&pin_PA18) }, - { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_TX), MP_ROM_PTR(&pin_PA12) }, - { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_RX), MP_ROM_PTR(&pin_PA13) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_TX), MP_ROM_PTR(&pin_PA13) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_ESP_RX), MP_ROM_PTR(&pin_PA12) }, { MP_OBJ_NEW_QSTR(MP_QSTR_SCL),MP_ROM_PTR(&pin_PB30) }, { MP_OBJ_NEW_QSTR(MP_QSTR_SDA),MP_ROM_PTR(&pin_PB31) }, diff --git a/ports/atmel-samd/boards/meowmeow/mpconfigboard.h b/ports/atmel-samd/boards/meowmeow/mpconfigboard.h index 80d367863..7bbbf3322 100644 --- a/ports/atmel-samd/boards/meowmeow/mpconfigboard.h +++ b/ports/atmel-samd/boards/meowmeow/mpconfigboard.h @@ -11,7 +11,7 @@ #define CALIBRATE_CRYSTALLESS 1 // Explanation of how a user got into safe mode. -#define BOARD_USER_SAFE_MODE_ACTION "pressing both buttons at start up" +#define BOARD_USER_SAFE_MODE_ACTION translate("pressing both buttons at start up.\n") #define DEFAULT_I2C_BUS_SCL (&pin_PA01) #define DEFAULT_I2C_BUS_SDA (&pin_PA00) diff --git a/ports/atmel-samd/boards/metro_m4_airlift_lite/mpconfigboard.mk b/ports/atmel-samd/boards/metro_m4_airlift_lite/mpconfigboard.mk index e999629c3..4895cda77 100644 --- a/ports/atmel-samd/boards/metro_m4_airlift_lite/mpconfigboard.mk +++ b/ports/atmel-samd/boards/metro_m4_airlift_lite/mpconfigboard.mk @@ -6,10 +6,6 @@ USB_MANUFACTURER = "Adafruit Industries LLC" CHIP_VARIANT = SAMD51J19A CHIP_FAMILY = samd51 -# Support _bleio via the on-board ESP32 module. -CIRCUITPY_BLEIO = 1 -CIRCUITPY_BLEIO_HCI = 1 - QSPI_FLASH_FILESYSTEM = 1 EXTERNAL_FLASH_DEVICE_COUNT = 3 EXTERNAL_FLASH_DEVICES = "S25FL116K, S25FL216K, GD25Q16C" diff --git a/ports/atmel-samd/boards/monster_m4sk/board.c b/ports/atmel-samd/boards/monster_m4sk/board.c index 4dd65f8c9..45fea9d52 100644 --- a/ports/atmel-samd/boards/monster_m4sk/board.c +++ b/ports/atmel-samd/boards/monster_m4sk/board.c @@ -92,7 +92,8 @@ void board_init(void) { false, // data_as_commands true, // auto_refresh 60, // native_frames_per_second - true); // backlight_on_high + true, // backlight_on_high + false); // SH1107_addressing } bool board_requests_safe_mode(void) { diff --git a/ports/atmel-samd/boards/openbook_m4/board.c b/ports/atmel-samd/boards/openbook_m4/board.c index f0010f6d7..07dd1741a 100644 --- a/ports/atmel-samd/boards/openbook_m4/board.c +++ b/ports/atmel-samd/boards/openbook_m4/board.c @@ -97,7 +97,8 @@ void board_init(void) { &pin_PA01, // busy_pin false, // busy_state 5, // seconds_per_frame - false); // chip_select (don't always toggle chip select) + false, // chip_select (don't always toggle chip select) + false); // grayscale } bool board_requests_safe_mode(void) { diff --git a/ports/atmel-samd/boards/pewpew10/mpconfigboard.mk b/ports/atmel-samd/boards/pewpew10/mpconfigboard.mk index 7305abf73..1cc91a8df 100644 --- a/ports/atmel-samd/boards/pewpew10/mpconfigboard.mk +++ b/ports/atmel-samd/boards/pewpew10/mpconfigboard.mk @@ -1,5 +1,5 @@ USB_VID = 0x239A -USB_PID = 0x801D +USB_PID = 0x80D5 USB_PRODUCT = "PewPew 10.2" USB_MANUFACTURER = "Radomir Dopieralski" diff --git a/ports/atmel-samd/boards/pewpew_m4/board.c b/ports/atmel-samd/boards/pewpew_m4/board.c index 52a52b4b7..d02e0dc01 100644 --- a/ports/atmel-samd/boards/pewpew_m4/board.c +++ b/ports/atmel-samd/boards/pewpew_m4/board.c @@ -143,7 +143,8 @@ void board_init(void) { false, // data_as_commands false, // auto_refresh 20, // native_frames_per_second - true); // backlight_on_high + true, // backlight_on_high + false); // SH1107_addressing } bool board_requests_safe_mode(void) { diff --git a/ports/atmel-samd/boards/pybadge/board.c b/ports/atmel-samd/boards/pybadge/board.c index 45298acc2..35f228c75 100644 --- a/ports/atmel-samd/boards/pybadge/board.c +++ b/ports/atmel-samd/boards/pybadge/board.c @@ -114,7 +114,8 @@ void board_init(void) { false, // data_as_commands true, // auto_refresh 60, // native_frames_per_second - true); // backlight_on_high + true, // backlight_on_high + false); // SH1107_addressing } bool board_requests_safe_mode(void) { diff --git a/ports/atmel-samd/boards/pybadge_airlift/board.c b/ports/atmel-samd/boards/pybadge_airlift/board.c index 7495c7d48..fe3e4a017 100644 --- a/ports/atmel-samd/boards/pybadge_airlift/board.c +++ b/ports/atmel-samd/boards/pybadge_airlift/board.c @@ -92,7 +92,8 @@ void board_init(void) { false, // data_as_commands true, // auto_refresh 60, // native_frames_per_second - true); // backlight_on_high + true, // backlight_on_high + false); // SH1107_addressing } bool board_requests_safe_mode(void) { diff --git a/ports/atmel-samd/boards/pygamer/board.c b/ports/atmel-samd/boards/pygamer/board.c index 2e83440ea..b478b5947 100644 --- a/ports/atmel-samd/boards/pygamer/board.c +++ b/ports/atmel-samd/boards/pygamer/board.c @@ -114,7 +114,8 @@ void board_init(void) { false, // data_as_commands true, // auto_refresh 60, // native_frames_per_second - true); // backlight_on_high + true, // backlight_on_high + false); // SH1107_addressing } bool board_requests_safe_mode(void) { diff --git a/ports/atmel-samd/boards/pygamer_advance/board.c b/ports/atmel-samd/boards/pygamer_advance/board.c index 330446b6f..7dfe07c00 100644 --- a/ports/atmel-samd/boards/pygamer_advance/board.c +++ b/ports/atmel-samd/boards/pygamer_advance/board.c @@ -92,7 +92,8 @@ void board_init(void) { false, // data_as_commands true, // auto_refresh 60, // native_frames_per_second - true); // backlight_on_high + true, // backlight_on_high + false); // SH1107_addressing } bool board_requests_safe_mode(void) { diff --git a/ports/atmel-samd/boards/pyportal/board.c b/ports/atmel-samd/boards/pyportal/board.c index d14b6b6a5..cd94f6887 100644 --- a/ports/atmel-samd/boards/pyportal/board.c +++ b/ports/atmel-samd/boards/pyportal/board.c @@ -100,7 +100,8 @@ void board_init(void) { false, // data_as_commands true, // auto_refresh 60, // native_frames_per_second - true); // backlight_on_high + true, // backlight_on_high + false); // SH1107_addressing } bool board_requests_safe_mode(void) { diff --git a/ports/atmel-samd/boards/pyportal_titano/board.c b/ports/atmel-samd/boards/pyportal_titano/board.c index 0ee2e68aa..dc417f5d1 100644 --- a/ports/atmel-samd/boards/pyportal_titano/board.c +++ b/ports/atmel-samd/boards/pyportal_titano/board.c @@ -117,7 +117,8 @@ void board_init(void) { false, // data_as_commands true, // auto_refresh 60, // native_frames_per_second - true); // backlight_on_high + true, // backlight_on_high + false); // SH1107_addressing } bool board_requests_safe_mode(void) { diff --git a/ports/atmel-samd/boards/qtpy_m0/board.c b/ports/atmel-samd/boards/qtpy_m0/board.c new file mode 100644 index 000000000..1a65a561f --- /dev/null +++ b/ports/atmel-samd/boards/qtpy_m0/board.c @@ -0,0 +1,44 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" +#include "common-hal/microcontroller/Pin.h" +#include "supervisor/shared/board.h" +#include "hal/include/hal_gpio.h" + +void board_init(void) { + gpio_set_pin_function(PIN_PA15, GPIO_PIN_FUNCTION_OFF); + gpio_set_pin_direction(PIN_PA15, GPIO_DIRECTION_OUT); + gpio_set_pin_level(PIN_PA15, true); // Turn on neopixel by default + never_reset_pin_number(PIN_PA15); +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { +} diff --git a/ports/atmel-samd/boards/qtpy_m0/mpconfigboard.h b/ports/atmel-samd/boards/qtpy_m0/mpconfigboard.h new file mode 100644 index 000000000..713d2c03e --- /dev/null +++ b/ports/atmel-samd/boards/qtpy_m0/mpconfigboard.h @@ -0,0 +1,55 @@ +#define MICROPY_HW_BOARD_NAME "Adafruit QT Py M0" +#define MICROPY_HW_MCU_NAME "samd21e18" + +#define MICROPY_HW_NEOPIXEL (&pin_PA18) + +#define MICROPY_PORT_A (0) +#define MICROPY_PORT_B (0) +#define MICROPY_PORT_C (0) + +#define IGNORE_PIN_PA00 1 +#define IGNORE_PIN_PA01 1 +#define IGNORE_PIN_PA12 1 +#define IGNORE_PIN_PA13 1 +#define IGNORE_PIN_PA14 1 +#define IGNORE_PIN_PA20 1 +#define IGNORE_PIN_PA21 1 +// USB is always used internally so skip the pin objects for it. +#define IGNORE_PIN_PA24 1 +#define IGNORE_PIN_PA25 1 +#define IGNORE_PIN_PA27 1 +#define IGNORE_PIN_PA28 1 +#define IGNORE_PIN_PA30 1 +#define IGNORE_PIN_PA31 1 +#define IGNORE_PIN_PB01 1 +#define IGNORE_PIN_PB02 1 +#define IGNORE_PIN_PB03 1 +#define IGNORE_PIN_PB04 1 +#define IGNORE_PIN_PB05 1 +#define IGNORE_PIN_PB06 1 +#define IGNORE_PIN_PB07 1 +#define IGNORE_PIN_PB08 1 +#define IGNORE_PIN_PB09 1 +#define IGNORE_PIN_PB10 1 +#define IGNORE_PIN_PB11 1 +#define IGNORE_PIN_PB12 1 +#define IGNORE_PIN_PB13 1 +#define IGNORE_PIN_PB14 1 +#define IGNORE_PIN_PB15 1 +#define IGNORE_PIN_PB16 1 +#define IGNORE_PIN_PB17 1 +#define IGNORE_PIN_PB22 1 +#define IGNORE_PIN_PB23 1 +#define IGNORE_PIN_PB30 1 +#define IGNORE_PIN_PB31 1 +#define IGNORE_PIN_PB00 1 + +#define DEFAULT_I2C_BUS_SCL (&pin_PA17) +#define DEFAULT_I2C_BUS_SDA (&pin_PA16) + +#define DEFAULT_SPI_BUS_SCK (&pin_PA11) +#define DEFAULT_SPI_BUS_MOSI (&pin_PA10) +#define DEFAULT_SPI_BUS_MISO (&pin_PA09) + +#define DEFAULT_UART_BUS_RX (&pin_PA07) +#define DEFAULT_UART_BUS_TX (&pin_PA06) diff --git a/ports/atmel-samd/boards/qtpy_m0/mpconfigboard.mk b/ports/atmel-samd/boards/qtpy_m0/mpconfigboard.mk new file mode 100644 index 000000000..964cbe643 --- /dev/null +++ b/ports/atmel-samd/boards/qtpy_m0/mpconfigboard.mk @@ -0,0 +1,24 @@ +USB_VID = 0x239A +USB_PID = 0x80CC +USB_PRODUCT = "QT Py M0" +USB_MANUFACTURER = "Adafruit Industries LLC" + +CHIP_VARIANT = SAMD21E18A +CHIP_FAMILY = samd21 + +INTERNAL_FLASH_FILESYSTEM = 1 +LONGINT_IMPL = NONE +CIRCUITPY_FULL_BUILD = 0 + +SUPEROPT_GC = 0 + +CFLAGS_BOARD = --param max-inline-insns-auto=15 +ifeq ($(TRANSLATION), zh_Latn_pinyin) +RELEASE_NEEDS_CLEAN_BUILD = 1 +CFLAGS_INLINE_LIMIT = 35 +endif +ifeq ($(TRANSLATION), de_DE) +RELEASE_NEEDS_CLEAN_BUILD = 1 +CFLAGS_INLINE_LIMIT = 35 +SUPEROPT_VM = 0 +endif diff --git a/ports/atmel-samd/boards/qtpy_m0/pins.c b/ports/atmel-samd/boards/qtpy_m0/pins.c new file mode 100644 index 000000000..636c48bff --- /dev/null +++ b/ports/atmel-samd/boards/qtpy_m0/pins.c @@ -0,0 +1,49 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PA02) }, + { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA02) }, + + { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PA03) }, + { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA03) }, + + { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PA04) }, + { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA04) }, + + { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PA05) }, + { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PA05) }, + + { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PA16) }, + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA16) }, + + { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_PA17) }, + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA17) }, + + { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_PA06) }, + { MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_PA06) }, + { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PA06) }, + + { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_PA07) }, + { MP_ROM_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_PA07) }, + { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PA07) }, + + { MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_PA11) }, + { MP_ROM_QSTR(MP_QSTR_A8), MP_ROM_PTR(&pin_PA11) }, + { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA11) }, + + { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_PA09) }, + { MP_ROM_QSTR(MP_QSTR_A9), MP_ROM_PTR(&pin_PA09) }, + { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PA09) }, + + { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA10) }, + { MP_ROM_QSTR(MP_QSTR_A10), MP_ROM_PTR(&pin_PA10) }, + { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA10) }, + + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA18) }, + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL_POWER), MP_ROM_PTR(&pin_PA15) }, + + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, + { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, + { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/atmel-samd/boards/qtpy_m0_haxpress/board.c b/ports/atmel-samd/boards/qtpy_m0_haxpress/board.c new file mode 100644 index 000000000..1a65a561f --- /dev/null +++ b/ports/atmel-samd/boards/qtpy_m0_haxpress/board.c @@ -0,0 +1,44 @@ +/* + * This file is part of the MicroPython project, http://micropython.org/ + * + * The MIT License (MIT) + * + * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "boards/board.h" +#include "common-hal/microcontroller/Pin.h" +#include "supervisor/shared/board.h" +#include "hal/include/hal_gpio.h" + +void board_init(void) { + gpio_set_pin_function(PIN_PA15, GPIO_PIN_FUNCTION_OFF); + gpio_set_pin_direction(PIN_PA15, GPIO_DIRECTION_OUT); + gpio_set_pin_level(PIN_PA15, true); // Turn on neopixel by default + never_reset_pin_number(PIN_PA15); +} + +bool board_requests_safe_mode(void) { + return false; +} + +void reset_board(void) { +} diff --git a/ports/atmel-samd/boards/qtpy_m0_haxpress/mpconfigboard.h b/ports/atmel-samd/boards/qtpy_m0_haxpress/mpconfigboard.h new file mode 100644 index 000000000..4e557751f --- /dev/null +++ b/ports/atmel-samd/boards/qtpy_m0_haxpress/mpconfigboard.h @@ -0,0 +1,60 @@ +#define MICROPY_HW_BOARD_NAME "Adafruit QT Py M0 Haxpress" +#define MICROPY_HW_MCU_NAME "samd21e18" + +#define MICROPY_HW_NEOPIXEL (&pin_PA18) + +#define MICROPY_PORT_A (0) +#define MICROPY_PORT_B (0) +#define MICROPY_PORT_C (0) + +#define SPI_FLASH_MOSI_PIN &pin_PA22 +#define SPI_FLASH_MISO_PIN &pin_PA19 +#define SPI_FLASH_SCK_PIN &pin_PA23 +#define SPI_FLASH_CS_PIN &pin_PA08 + +#define IGNORE_PIN_PA00 1 +#define IGNORE_PIN_PA01 1 +#define IGNORE_PIN_PA12 1 +#define IGNORE_PIN_PA13 1 +#define IGNORE_PIN_PA14 1 +#define IGNORE_PIN_PA20 1 +#define IGNORE_PIN_PA21 1 +// USB is always used internally so skip the pin objects for it. +#define IGNORE_PIN_PA24 1 +#define IGNORE_PIN_PA25 1 +#define IGNORE_PIN_PA27 1 +#define IGNORE_PIN_PA28 1 +#define IGNORE_PIN_PA30 1 +#define IGNORE_PIN_PA31 1 +#define IGNORE_PIN_PB01 1 +#define IGNORE_PIN_PB02 1 +#define IGNORE_PIN_PB03 1 +#define IGNORE_PIN_PB04 1 +#define IGNORE_PIN_PB05 1 +#define IGNORE_PIN_PB06 1 +#define IGNORE_PIN_PB07 1 +#define IGNORE_PIN_PB08 1 +#define IGNORE_PIN_PB09 1 +#define IGNORE_PIN_PB10 1 +#define IGNORE_PIN_PB11 1 +#define IGNORE_PIN_PB12 1 +#define IGNORE_PIN_PB13 1 +#define IGNORE_PIN_PB14 1 +#define IGNORE_PIN_PB15 1 +#define IGNORE_PIN_PB16 1 +#define IGNORE_PIN_PB17 1 +#define IGNORE_PIN_PB22 1 +#define IGNORE_PIN_PB23 1 +#define IGNORE_PIN_PB30 1 +#define IGNORE_PIN_PB31 1 +#define IGNORE_PIN_PB00 1 + +#define DEFAULT_I2C_BUS_SCL (&pin_PA17) +#define DEFAULT_I2C_BUS_SDA (&pin_PA16) + +#define DEFAULT_SPI_BUS_SCK (&pin_PA11) +#define DEFAULT_SPI_BUS_MOSI (&pin_PA10) +#define DEFAULT_SPI_BUS_MISO (&pin_PA09) + +#define DEFAULT_UART_BUS_RX (&pin_PA07) +#define DEFAULT_UART_BUS_TX (&pin_PA06) diff --git a/ports/atmel-samd/boards/qtpy_m0_haxpress/mpconfigboard.mk b/ports/atmel-samd/boards/qtpy_m0_haxpress/mpconfigboard.mk new file mode 100644 index 000000000..a63f14274 --- /dev/null +++ b/ports/atmel-samd/boards/qtpy_m0_haxpress/mpconfigboard.mk @@ -0,0 +1,32 @@ +USB_VID = 0x239A +USB_PID = 0x00CC +USB_PRODUCT = "QT Py M0 Haxpress" +USB_MANUFACTURER = "Adafruit Industries LLC" + +CHIP_VARIANT = SAMD21E18A +CHIP_FAMILY = samd21 + +INTERNAL_FLASH_FILESYSTEM = 0 +LONGINT_IMPL = MPZ +SPI_FLASH_FILESYSTEM = 1 +EXTERNAL_FLASH_DEVICE_COUNT = 1 +EXTERNAL_FLASH_DEVICES = GD25Q16C + +CIRCUITPY_AUDIOBUSIO = 0 +CIRCUITPY_BITBANGIO = 0 +CIRCUITPY_COUNTIO = 0 +CIRCUITPY_FREQUENCYIO = 0 +CIRCUITPY_I2CPERIPHERAL = 0 + +SUPEROPT_GC = 0 + +CFLAGS_BOARD = --param max-inline-insns-auto=15 +ifeq ($(TRANSLATION), zh_Latn_pinyin) +RELEASE_NEEDS_CLEAN_BUILD = 1 +CFLAGS_INLINE_LIMIT = 35 +endif +ifeq ($(TRANSLATION), de_DE) +RELEASE_NEEDS_CLEAN_BUILD = 1 +CFLAGS_INLINE_LIMIT = 35 +SUPEROPT_VM = 0 +endif diff --git a/ports/atmel-samd/boards/qtpy_m0_haxpress/pins.c b/ports/atmel-samd/boards/qtpy_m0_haxpress/pins.c new file mode 100644 index 000000000..636c48bff --- /dev/null +++ b/ports/atmel-samd/boards/qtpy_m0_haxpress/pins.c @@ -0,0 +1,49 @@ +#include "shared-bindings/board/__init__.h" + +STATIC const mp_rom_map_elem_t board_global_dict_table[] = { + { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_PA02) }, + { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA02) }, + + { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PA03) }, + { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA03) }, + + { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PA04) }, + { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA04) }, + + { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PA05) }, + { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PA05) }, + + { MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PA16) }, + { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA16) }, + + { MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_PA17) }, + { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA17) }, + + { MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_PA06) }, + { MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_PA06) }, + { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PA06) }, + + { MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_PA07) }, + { MP_ROM_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_PA07) }, + { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PA07) }, + + { MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_PA11) }, + { MP_ROM_QSTR(MP_QSTR_A8), MP_ROM_PTR(&pin_PA11) }, + { MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA11) }, + + { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_PA09) }, + { MP_ROM_QSTR(MP_QSTR_A9), MP_ROM_PTR(&pin_PA09) }, + { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PA09) }, + + { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA10) }, + { MP_ROM_QSTR(MP_QSTR_A10), MP_ROM_PTR(&pin_PA10) }, + { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA10) }, + + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA18) }, + { MP_ROM_QSTR(MP_QSTR_NEOPIXEL_POWER), MP_ROM_PTR(&pin_PA15) }, + + { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, + { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, + { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }, +}; +MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/atmel-samd/boards/same54_xplained/mpconfigboard.mk b/ports/atmel-samd/boards/same54_xplained/mpconfigboard.mk index 7ac126514..e4472e05d 100644 --- a/ports/atmel-samd/boards/same54_xplained/mpconfigboard.mk +++ b/ports/atmel-samd/boards/same54_xplained/mpconfigboard.mk @@ -12,3 +12,4 @@ EXTERNAL_FLASH_DEVICES = "N25Q256A" LONGINT_IMPL = MPZ CIRCUITPY_SDIOIO = 1 +CIRCUITPY_CANIO = 1 diff --git a/ports/atmel-samd/boards/same54_xplained/pins.c b/ports/atmel-samd/boards/same54_xplained/pins.c index 8a864ab97..1ed431fba 100644 --- a/ports/atmel-samd/boards/same54_xplained/pins.c +++ b/ports/atmel-samd/boards/same54_xplained/pins.c @@ -48,8 +48,9 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_OBJ_NEW_QSTR(MP_QSTR_QT), MP_ROM_PTR(&pin_PA16) }, - { MP_OBJ_NEW_QSTR(MP_QSTR_CANRX), MP_ROM_PTR(&pin_PB12) }, - { MP_OBJ_NEW_QSTR(MP_QSTR_CANTX), MP_ROM_PTR(&pin_PB13) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_CAN_RX), MP_ROM_PTR(&pin_PB13) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_CAN_TX), MP_ROM_PTR(&pin_PB12) }, + { MP_OBJ_NEW_QSTR(MP_QSTR_CAN_STANDBY), MP_ROM_PTR(&pin_PC13) }, // EXT1 header { MP_OBJ_NEW_QSTR(MP_QSTR_PB04), MP_ROM_PTR(&pin_PB04) }, diff --git a/ports/atmel-samd/boards/seeeduino_wio_terminal/board.c b/ports/atmel-samd/boards/seeeduino_wio_terminal/board.c index b7fc736eb..49db49860 100644 --- a/ports/atmel-samd/boards/seeeduino_wio_terminal/board.c +++ b/ports/atmel-samd/boards/seeeduino_wio_terminal/board.c @@ -31,8 +31,12 @@ #include "shared-bindings/displayio/FourWire.h" #include "shared-module/displayio/__init__.h" #include "shared-module/displayio/mipi_constants.h" +#include "shared-bindings/digitalio/DigitalInOut.h" displayio_fourwire_obj_t board_display_obj; +digitalio_digitalinout_obj_t CTR_5V; +digitalio_digitalinout_obj_t CTR_3V3; +digitalio_digitalinout_obj_t USB_HOST_ENABLE; uint8_t display_init_sequence[] = { 0x01, 0x80, 0x80, // Software reset then delay 0x80 (128ms) @@ -105,7 +109,27 @@ void board_init(void) { false, // data_as_commands true, // auto_refresh 60, // native_frames_per_second - true); // backlight_on_high + true, // backlight_on_high + false); // SH1107_addressing + + // Enabling the Power of the 40-pin at the back + CTR_5V.base.type = &digitalio_digitalinout_type; + CTR_3V3.base.type = &digitalio_digitalinout_type; + USB_HOST_ENABLE.base.type = &digitalio_digitalinout_type; + + common_hal_digitalio_digitalinout_construct(&CTR_5V, PIN_CTR_5V); + common_hal_digitalio_digitalinout_construct(&CTR_3V3, PIN_CTR_3V3); + common_hal_digitalio_digitalinout_construct(&USB_HOST_ENABLE, PIN_USB_HOST_ENABLE); + + common_hal_digitalio_digitalinout_set_value(&CTR_5V, true); + common_hal_digitalio_digitalinout_set_value(&CTR_3V3, false); + common_hal_digitalio_digitalinout_set_value(&USB_HOST_ENABLE, false); + + // Never reset + common_hal_digitalio_digitalinout_never_reset(&CTR_5V); + common_hal_digitalio_digitalinout_never_reset(&CTR_3V3); + common_hal_digitalio_digitalinout_never_reset(&USB_HOST_ENABLE); + } bool board_requests_safe_mode(void) { diff --git a/ports/atmel-samd/boards/seeeduino_wio_terminal/mpconfigboard.h b/ports/atmel-samd/boards/seeeduino_wio_terminal/mpconfigboard.h index f7d0448df..c87ca46d8 100644 --- a/ports/atmel-samd/boards/seeeduino_wio_terminal/mpconfigboard.h +++ b/ports/atmel-samd/boards/seeeduino_wio_terminal/mpconfigboard.h @@ -27,6 +27,10 @@ #define DEFAULT_UART_BUS_RX (&pin_PB27) #define DEFAULT_UART_BUS_TX (&pin_PB26) +#define PIN_CTR_5V (&pin_PC14) +#define PIN_CTR_3V3 (&pin_PC15) +#define PIN_USB_HOST_ENABLE (&pin_PA27) + // USB is always used internally so skip the pin objects for it. #define IGNORE_PIN_PA24 1 #define IGNORE_PIN_PA25 1 diff --git a/ports/atmel-samd/boards/sparkfun_lumidrive/mpconfigboard.h b/ports/atmel-samd/boards/sparkfun_lumidrive/mpconfigboard.h index d184945f3..80f37429f 100755 --- a/ports/atmel-samd/boards/sparkfun_lumidrive/mpconfigboard.h +++ b/ports/atmel-samd/boards/sparkfun_lumidrive/mpconfigboard.h @@ -35,9 +35,6 @@ #define IGNORE_PIN_PA12 1 #define IGNORE_PIN_PA15 1 #define IGNORE_PIN_PA16 1 -#define IGNORE_PIN_PA21 1 -#define IGNORE_PIN_PA22 1 -#define IGNORE_PIN_PA23 1 #define IGNORE_PIN_PA27 1 #define IGNORE_PIN_PA28 1 diff --git a/ports/atmel-samd/boards/trinket_m0_haxpress/mpconfigboard.mk b/ports/atmel-samd/boards/trinket_m0_haxpress/mpconfigboard.mk index 402db7ebc..7eda151f3 100644 --- a/ports/atmel-samd/boards/trinket_m0_haxpress/mpconfigboard.mk +++ b/ports/atmel-samd/boards/trinket_m0_haxpress/mpconfigboard.mk @@ -17,6 +17,7 @@ CIRCUITPY_COUNTIO = 0 CIRCUITPY_RTC = 0 CIRCUITPY_FREQUENCYIO = 0 CIRCUITPY_I2CPERIPHERAL = 0 +MICROPY_PY_ASYNC_AWAIT = 0 SUPEROPT_GC = 0 diff --git a/ports/atmel-samd/boards/uchip/mpconfigboard.h b/ports/atmel-samd/boards/uchip/mpconfigboard.h index 1877a41ef..5d6af4b78 100644 --- a/ports/atmel-samd/boards/uchip/mpconfigboard.h +++ b/ports/atmel-samd/boards/uchip/mpconfigboard.h @@ -16,8 +16,6 @@ #define IGNORE_PIN_PA27 1 #define IGNORE_PIN_PA28 1 -#define IGNORE_PIN_PA30 1 -#define IGNORE_PIN_PA31 1 #define IGNORE_PIN_PB01 1 #define IGNORE_PIN_PB02 1 diff --git a/ports/atmel-samd/boards/uchip/pins.c b/ports/atmel-samd/boards/uchip/pins.c index 856a22074..de5508110 100644 --- a/ports/atmel-samd/boards/uchip/pins.c +++ b/ports/atmel-samd/boards/uchip/pins.c @@ -1,14 +1,18 @@ #include "shared-bindings/board/__init__.h" STATIC const mp_rom_map_elem_t board_global_dict_table[] = { - { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA08) }, - { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA10) }, - { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA09) }, - { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PA11) }, - { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA02) }, - { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PA04) }, - { MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_PA03) }, - { MP_ROM_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_PA05) }, + { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_PA07) }, + { MP_ROM_QSTR(MP_QSTR_BOOST_EN), MP_ROM_PTR(&pin_PA14) }, + { MP_ROM_QSTR(MP_QSTR_VEXT_SELECT), MP_ROM_PTR(&pin_PA15) }, + { MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA06) }, + { MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA06) }, + { MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA08) }, + { MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_PA10) }, + { MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA09) }, + { MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_PA11) }, + { MP_ROM_QSTR(MP_QSTR_A6), MP_ROM_PTR(&pin_PA02) }, + { MP_ROM_QSTR(MP_QSTR_A7), MP_ROM_PTR(&pin_PA03) }, + { MP_ROM_QSTR(MP_QSTR_A8), MP_ROM_PTR(&pin_PA04) }, { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_PA16) }, { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_PA08) }, { MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PA10) }, @@ -19,8 +23,10 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_PA19) }, { MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_PA22) }, { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_PA23) }, - { MP_ROM_QSTR(MP_QSTR_D14), MP_ROM_PTR(&pin_PA03) }, - { MP_ROM_QSTR(MP_QSTR_D15), MP_ROM_PTR(&pin_PA05) }, + { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_PA31) }, + { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PA30) }, + { MP_ROM_QSTR(MP_QSTR_D14), MP_ROM_PTR(&pin_PA02) }, + { MP_ROM_QSTR(MP_QSTR_D15), MP_ROM_PTR(&pin_PA03) }, { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PA09) }, { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PA08) }, { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA22) }, diff --git a/ports/atmel-samd/boards/ugame10/board.c b/ports/atmel-samd/boards/ugame10/board.c index 3bb9eab7d..9f2b8d039 100644 --- a/ports/atmel-samd/boards/ugame10/board.c +++ b/ports/atmel-samd/boards/ugame10/board.c @@ -111,7 +111,8 @@ void board_init(void) { false, // data as commands true, // auto_refresh 60, // native_frames_per_second - true); // backlight_on_high + true, // backlight_on_high + false); // SH1107_addressing } bool board_requests_safe_mode(void) { diff --git a/ports/atmel-samd/boards/ugame10/mpconfigboard.mk b/ports/atmel-samd/boards/ugame10/mpconfigboard.mk index bd320d9e4..b1242d206 100644 --- a/ports/atmel-samd/boards/ugame10/mpconfigboard.mk +++ b/ports/atmel-samd/boards/ugame10/mpconfigboard.mk @@ -1,5 +1,5 @@ USB_VID = 0x239A -USB_PID = 0x801F +USB_PID = 0x80AF USB_PRODUCT = "uGame10" USB_MANUFACTURER = "Radomir Dopieralski" diff --git a/ports/atmel-samd/boards/winterbloom_sol/mpconfigboard.mk b/ports/atmel-samd/boards/winterbloom_sol/mpconfigboard.mk index 9217cdf23..fcefaee9b 100644 --- a/ports/atmel-samd/boards/winterbloom_sol/mpconfigboard.mk +++ b/ports/atmel-samd/boards/winterbloom_sol/mpconfigboard.mk @@ -18,7 +18,7 @@ LONGINT_IMPL = MPZ # Disable modules that are unusable on this special-purpose board. CIRCUITPY_AUDIOBUSIO = 0 CIRCUITPY_AUDIOIO = 0 -CIRCUITPY_BLEIO = 0 +CIRCUITPY_BLEIO_HCI = 0 CIRCUITPY_DISPLAYIO = 0 CIRCUITPY_FRAMEBUFFERIO = 0 CIRCUITPY_GAMEPAD = 0 |