diff options
Diffstat (limited to 'ports/esp32s2/boards')
38 files changed, 72 insertions, 72 deletions
diff --git a/ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/board.c b/ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/board.c index aaef97c7d..e40b6335b 100644 --- a/ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/board.c +++ b/ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/board.c @@ -34,10 +34,10 @@ void board_init(void) { common_hal_never_reset_pin(&pin_GPIO20); // Debug UART -#ifdef DEBUG + #ifdef DEBUG common_hal_never_reset_pin(&pin_GPIO43); common_hal_never_reset_pin(&pin_GPIO44); -#endif /* DEBUG */ + #endif /* DEBUG */ } bool board_requests_safe_mode(void) { diff --git a/ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h b/ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h index 9d95e8e43..a04065d25 100644 --- a/ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h +++ b/ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h @@ -24,7 +24,7 @@ * THE SOFTWARE. */ -//Micropython setup +// Micropython setup #define MICROPY_HW_BOARD_NAME "Feather ESP32S2 without PSRAM" #define MICROPY_HW_MCU_NAME "ESP32S2" diff --git a/ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/board.c b/ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/board.c index c8be18747..799494006 100644 --- a/ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/board.c +++ b/ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/board.c @@ -55,10 +55,10 @@ void board_init(void) { common_hal_never_reset_pin(&pin_GPIO20); // Debug UART -#ifdef DEBUG + #ifdef DEBUG common_hal_never_reset_pin(&pin_GPIO43); common_hal_never_reset_pin(&pin_GPIO44); -#endif /* DEBUG */ + #endif /* DEBUG */ /* busio_spi_obj_t* spi = &displays[0].fourwire_bus.inline_bus; diff --git a/ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h b/ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h index 9d95e8e43..a04065d25 100644 --- a/ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h +++ b/ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h @@ -24,7 +24,7 @@ * THE SOFTWARE. */ -//Micropython setup +// Micropython setup #define MICROPY_HW_BOARD_NAME "Feather ESP32S2 without PSRAM" #define MICROPY_HW_MCU_NAME "ESP32S2" diff --git a/ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/pins.c b/ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/pins.c index 7e1a72374..0504f9694 100644 --- a/ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/pins.c +++ b/ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/pins.c @@ -67,6 +67,6 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) }, { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) }, - // { MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].display)} + // { MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].display)} }; MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/board.c b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/board.c index 63a16c120..020e6f6a1 100644 --- a/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/board.c +++ b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/board.c @@ -35,7 +35,7 @@ #include "components/log/include/esp_log.h" -static const char* TAG = "board"; +static const char *TAG = "board"; #define DELAY 0x80 @@ -115,16 +115,16 @@ void board_init(void) { common_hal_never_reset_pin(&pin_GPIO20); // Debug UART -#ifdef DEBUG + #ifdef DEBUG common_hal_never_reset_pin(&pin_GPIO43); common_hal_never_reset_pin(&pin_GPIO44); -#endif /* DEBUG */ + #endif /* DEBUG */ - busio_spi_obj_t* spi = &displays[0].fourwire_bus.inline_bus; + busio_spi_obj_t *spi = &displays[0].fourwire_bus.inline_bus; common_hal_busio_spi_construct(spi, &pin_GPIO36, &pin_GPIO35, NULL); common_hal_busio_spi_never_reset(spi); - displayio_fourwire_obj_t* bus = &displays[0].fourwire_bus; + displayio_fourwire_obj_t *bus = &displays[0].fourwire_bus; bus->base.type = &displayio_fourwire_type; common_hal_displayio_fourwire_construct(bus, spi, @@ -135,7 +135,7 @@ void board_init(void) { 0, // Polarity 0); // Phase - displayio_epaperdisplay_obj_t* display = &displays[0].epaper_display; + displayio_epaperdisplay_obj_t *display = &displays[0].epaper_display; display->base.type = &displayio_epaperdisplay_type; common_hal_displayio_epaperdisplay_construct( display, @@ -176,7 +176,7 @@ void reset_board(void) { } void board_deinit(void) { - displayio_epaperdisplay_obj_t* display = &displays[0].epaper_display; + displayio_epaperdisplay_obj_t *display = &displays[0].epaper_display; if (display->base.type == &displayio_epaperdisplay_type) { size_t i = 0; while (common_hal_displayio_epaperdisplay_get_busy(display)) { diff --git a/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h index 8dfe91271..ecfa1d78b 100644 --- a/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h +++ b/ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h @@ -24,7 +24,7 @@ * THE SOFTWARE. */ -//Micropython setup +// Micropython setup #define MICROPY_HW_BOARD_NAME "Adafruit MagTag" #define MICROPY_HW_MCU_NAME "ESP32S2" diff --git a/ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h b/ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h index b25d7d116..ec992383a 100644 --- a/ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h +++ b/ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h @@ -24,7 +24,7 @@ * THE SOFTWARE. */ -//Micropython setup +// Micropython setup #define MICROPY_HW_BOARD_NAME "Adafruit Metro ESP32S2" #define MICROPY_HW_MCU_NAME "ESP32S2" diff --git a/ports/esp32s2/boards/electroniccats_bastwifi/board.c b/ports/esp32s2/boards/electroniccats_bastwifi/board.c index aaef97c7d..e40b6335b 100644 --- a/ports/esp32s2/boards/electroniccats_bastwifi/board.c +++ b/ports/esp32s2/boards/electroniccats_bastwifi/board.c @@ -34,10 +34,10 @@ void board_init(void) { common_hal_never_reset_pin(&pin_GPIO20); // Debug UART -#ifdef DEBUG + #ifdef DEBUG common_hal_never_reset_pin(&pin_GPIO43); common_hal_never_reset_pin(&pin_GPIO44); -#endif /* DEBUG */ + #endif /* DEBUG */ } bool board_requests_safe_mode(void) { diff --git a/ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h b/ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h index 1ec61e946..cc4fd40df 100644 --- a/ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h +++ b/ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h @@ -24,7 +24,7 @@ * THE SOFTWARE. */ -//Micropython setup +// Micropython setup #define MICROPY_HW_BOARD_NAME "BastWiFi" #define MICROPY_HW_MCU_NAME "ESP32S2" diff --git a/ports/esp32s2/boards/espressif_kaluga_1/board.c b/ports/esp32s2/boards/espressif_kaluga_1/board.c index aaef97c7d..e40b6335b 100644 --- a/ports/esp32s2/boards/espressif_kaluga_1/board.c +++ b/ports/esp32s2/boards/espressif_kaluga_1/board.c @@ -34,10 +34,10 @@ void board_init(void) { common_hal_never_reset_pin(&pin_GPIO20); // Debug UART -#ifdef DEBUG + #ifdef DEBUG common_hal_never_reset_pin(&pin_GPIO43); common_hal_never_reset_pin(&pin_GPIO44); -#endif /* DEBUG */ + #endif /* DEBUG */ } bool board_requests_safe_mode(void) { diff --git a/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h b/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h index 2c0f175ab..21f6ae245 100644 --- a/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h +++ b/ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h @@ -24,7 +24,7 @@ * THE SOFTWARE. */ -//Micropython setup +// Micropython setup #define MICROPY_HW_BOARD_NAME "Kaluga 1" #define MICROPY_HW_MCU_NAME "ESP32S2" diff --git a/ports/esp32s2/boards/espressif_saola_1_wroom/board.c b/ports/esp32s2/boards/espressif_saola_1_wroom/board.c index aaef97c7d..e40b6335b 100644 --- a/ports/esp32s2/boards/espressif_saola_1_wroom/board.c +++ b/ports/esp32s2/boards/espressif_saola_1_wroom/board.c @@ -34,10 +34,10 @@ void board_init(void) { common_hal_never_reset_pin(&pin_GPIO20); // Debug UART -#ifdef DEBUG + #ifdef DEBUG common_hal_never_reset_pin(&pin_GPIO43); common_hal_never_reset_pin(&pin_GPIO44); -#endif /* DEBUG */ + #endif /* DEBUG */ } bool board_requests_safe_mode(void) { diff --git a/ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h b/ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h index 3f628c0f1..2aac10fe7 100644 --- a/ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h +++ b/ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h @@ -24,7 +24,7 @@ * THE SOFTWARE. */ -//Micropython setup +// Micropython setup #define MICROPY_HW_BOARD_NAME "Saola 1 w/Wroom" #define MICROPY_HW_MCU_NAME "ESP32S2" diff --git a/ports/esp32s2/boards/espressif_saola_1_wrover/board.c b/ports/esp32s2/boards/espressif_saola_1_wrover/board.c index aaef97c7d..e40b6335b 100644 --- a/ports/esp32s2/boards/espressif_saola_1_wrover/board.c +++ b/ports/esp32s2/boards/espressif_saola_1_wrover/board.c @@ -34,10 +34,10 @@ void board_init(void) { common_hal_never_reset_pin(&pin_GPIO20); // Debug UART -#ifdef DEBUG + #ifdef DEBUG common_hal_never_reset_pin(&pin_GPIO43); common_hal_never_reset_pin(&pin_GPIO44); -#endif /* DEBUG */ + #endif /* DEBUG */ } bool board_requests_safe_mode(void) { diff --git a/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h b/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h index 961522891..a5aa83814 100644 --- a/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h +++ b/ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h @@ -24,7 +24,7 @@ * THE SOFTWARE. */ -//Micropython setup +// Micropython setup #define MICROPY_HW_BOARD_NAME "Saola 1 w/Wrover" #define MICROPY_HW_MCU_NAME "ESP32S2" diff --git a/ports/esp32s2/boards/franzininho_wifi_wroom/board.c b/ports/esp32s2/boards/franzininho_wifi_wroom/board.c index aaef97c7d..e40b6335b 100644 --- a/ports/esp32s2/boards/franzininho_wifi_wroom/board.c +++ b/ports/esp32s2/boards/franzininho_wifi_wroom/board.c @@ -34,10 +34,10 @@ void board_init(void) { common_hal_never_reset_pin(&pin_GPIO20); // Debug UART -#ifdef DEBUG + #ifdef DEBUG common_hal_never_reset_pin(&pin_GPIO43); common_hal_never_reset_pin(&pin_GPIO44); -#endif /* DEBUG */ + #endif /* DEBUG */ } bool board_requests_safe_mode(void) { diff --git a/ports/esp32s2/boards/franzininho_wifi_wroom/mpconfigboard.h b/ports/esp32s2/boards/franzininho_wifi_wroom/mpconfigboard.h index 0960e96b6..c0a8659b1 100644 --- a/ports/esp32s2/boards/franzininho_wifi_wroom/mpconfigboard.h +++ b/ports/esp32s2/boards/franzininho_wifi_wroom/mpconfigboard.h @@ -24,7 +24,7 @@ * THE SOFTWARE. */ -//Micropython setup +// Micropython setup #define MICROPY_HW_BOARD_NAME "Franzininho WIFI w/Wroom" #define MICROPY_HW_MCU_NAME "ESP32S2" diff --git a/ports/esp32s2/boards/franzininho_wifi_wrover/board.c b/ports/esp32s2/boards/franzininho_wifi_wrover/board.c index aaef97c7d..e40b6335b 100644 --- a/ports/esp32s2/boards/franzininho_wifi_wrover/board.c +++ b/ports/esp32s2/boards/franzininho_wifi_wrover/board.c @@ -34,10 +34,10 @@ void board_init(void) { common_hal_never_reset_pin(&pin_GPIO20); // Debug UART -#ifdef DEBUG + #ifdef DEBUG common_hal_never_reset_pin(&pin_GPIO43); common_hal_never_reset_pin(&pin_GPIO44); -#endif /* DEBUG */ + #endif /* DEBUG */ } bool board_requests_safe_mode(void) { diff --git a/ports/esp32s2/boards/franzininho_wifi_wrover/mpconfigboard.h b/ports/esp32s2/boards/franzininho_wifi_wrover/mpconfigboard.h index fd10ee0b5..b17a65c10 100644 --- a/ports/esp32s2/boards/franzininho_wifi_wrover/mpconfigboard.h +++ b/ports/esp32s2/boards/franzininho_wifi_wrover/mpconfigboard.h @@ -24,7 +24,7 @@ * THE SOFTWARE. */ -//Micropython setup +// Micropython setup #define MICROPY_HW_BOARD_NAME "Franzininho WIFI w/Wrover" #define MICROPY_HW_MCU_NAME "ESP32S2" diff --git a/ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/board.c b/ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/board.c index 4aa7b3b24..1002fa6b7 100644 --- a/ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/board.c +++ b/ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/board.c @@ -62,21 +62,21 @@ uint8_t display_init_sequence[] = { 0x21, 0, // display on 0x29, 0 | DELAY, 255, - }; +}; static void display_init(void) { - busio_spi_obj_t* spi = &displays[0].fourwire_bus.inline_bus; + busio_spi_obj_t *spi = &displays[0].fourwire_bus.inline_bus; common_hal_busio_spi_construct( spi, &pin_GPIO36, // CLK &pin_GPIO35, // MOSI NULL // MISO not connected - ); + ); common_hal_busio_spi_never_reset(spi); - displayio_fourwire_obj_t* bus = &displays[0].fourwire_bus; + displayio_fourwire_obj_t *bus = &displays[0].fourwire_bus; bus->base.type = &displayio_fourwire_type; common_hal_displayio_fourwire_construct( @@ -88,9 +88,9 @@ static void display_init(void) { 40000000, // baudrate 0, // polarity 0 // phase - ); + ); - displayio_display_obj_t* display = &displays[0].display; + displayio_display_obj_t *display = &displays[0].display; display->base.type = &displayio_display_type; // workaround as board_init() is called before reset_port() in main.c @@ -126,7 +126,7 @@ static void display_init(void) { 60, // native_frames_per_second true, // backlight_on_high false // SH1107_addressing - ); + ); common_hal_never_reset_pin(&pin_GPIO33); // backlight pin } @@ -137,10 +137,10 @@ void board_init(void) { common_hal_never_reset_pin(&pin_GPIO20); // Debug UART -#ifdef DEBUG + #ifdef DEBUG common_hal_never_reset_pin(&pin_GPIO43); common_hal_never_reset_pin(&pin_GPIO44); -#endif /* DEBUG */ + #endif /* DEBUG */ // Display display_init(); diff --git a/ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h b/ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h index c9020c200..c9159b6f3 100644 --- a/ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h +++ b/ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h @@ -24,7 +24,7 @@ * THE SOFTWARE. */ -//Micropython setup +// Micropython setup #define MICROPY_HW_BOARD_NAME "LILYGO TTGO T8 ESP32-S2 w/Display" #define MICROPY_HW_MCU_NAME "ESP32S2" diff --git a/ports/esp32s2/boards/microdev_micro_s2/board.c b/ports/esp32s2/boards/microdev_micro_s2/board.c index d8fd3a0a2..a0e399b1e 100644 --- a/ports/esp32s2/boards/microdev_micro_s2/board.c +++ b/ports/esp32s2/boards/microdev_micro_s2/board.c @@ -34,10 +34,10 @@ void board_init(void) { common_hal_never_reset_pin(&pin_GPIO20); // Debug UART -#ifdef DEBUG + #ifdef DEBUG common_hal_never_reset_pin(&pin_GPIO43); common_hal_never_reset_pin(&pin_GPIO44); -#endif /* DEBUG */ + #endif /* DEBUG */ // SPI Flash and RAM common_hal_never_reset_pin(&pin_GPIO26); diff --git a/ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h b/ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h index 272ab20fa..47bcde7e9 100644 --- a/ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h +++ b/ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h @@ -24,7 +24,7 @@ * THE SOFTWARE. */ -//Micropython setup +// Micropython setup #define MICROPY_HW_BOARD_NAME "microS2" #define MICROPY_HW_MCU_NAME "ESP32S2" diff --git a/ports/esp32s2/boards/muselab_nanoesp32_s2/board.c b/ports/esp32s2/boards/muselab_nanoesp32_s2/board.c index aaef97c7d..e40b6335b 100644 --- a/ports/esp32s2/boards/muselab_nanoesp32_s2/board.c +++ b/ports/esp32s2/boards/muselab_nanoesp32_s2/board.c @@ -34,10 +34,10 @@ void board_init(void) { common_hal_never_reset_pin(&pin_GPIO20); // Debug UART -#ifdef DEBUG + #ifdef DEBUG common_hal_never_reset_pin(&pin_GPIO43); common_hal_never_reset_pin(&pin_GPIO44); -#endif /* DEBUG */ + #endif /* DEBUG */ } bool board_requests_safe_mode(void) { diff --git a/ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h b/ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h index 6b05ac06f..161215397 100644 --- a/ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h +++ b/ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h @@ -24,7 +24,7 @@ * THE SOFTWARE. */ -//Micropython setup +// Micropython setup #define MICROPY_HW_BOARD_NAME "nanoESP32-S2" #define MICROPY_HW_MCU_NAME "ESP32S2" diff --git a/ports/esp32s2/boards/targett_module_clip_wroom/board.c b/ports/esp32s2/boards/targett_module_clip_wroom/board.c index 9c58dd2c8..00b94a025 100644 --- a/ports/esp32s2/boards/targett_module_clip_wroom/board.c +++ b/ports/esp32s2/boards/targett_module_clip_wroom/board.c @@ -34,10 +34,10 @@ void board_init(void) { common_hal_never_reset_pin(&pin_GPIO20); // Debug UART -#ifdef DEBUG + #ifdef DEBUG common_hal_never_reset_pin(&pin_GPIO43); common_hal_never_reset_pin(&pin_GPIO44); -#endif /* DEBUG */ + #endif /* DEBUG */ // Crystal common_hal_never_reset_pin(&pin_GPIO15); diff --git a/ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h b/ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h index 6cf69138e..fe57007a9 100644 --- a/ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h +++ b/ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h @@ -24,14 +24,14 @@ * THE SOFTWARE. */ -//Micropython setup +// Micropython setup -//Essentially the same as the Saola board but without the neopixel +// Essentially the same as the Saola board but without the neopixel #define MICROPY_HW_BOARD_NAME "Targett Module Clip w/Wroom" #define MICROPY_HW_MCU_NAME "ESP32S2" -//#define MICROPY_HW_NEOPIXEL (&pin_GPIO18) +// #define MICROPY_HW_NEOPIXEL (&pin_GPIO18) #define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0) diff --git a/ports/esp32s2/boards/targett_module_clip_wroom/pins.c b/ports/esp32s2/boards/targett_module_clip_wroom/pins.c index 99db09645..a8ca8ba3e 100644 --- a/ports/esp32s2/boards/targett_module_clip_wroom/pins.c +++ b/ports/esp32s2/boards/targett_module_clip_wroom/pins.c @@ -43,6 +43,6 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_IO45), MP_ROM_PTR(&pin_GPIO45) }, { MP_ROM_QSTR(MP_QSTR_IO46), MP_ROM_PTR(&pin_GPIO46) }, - //{ MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO18) }, + // { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO18) }, }; MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/esp32s2/boards/targett_module_clip_wrover/board.c b/ports/esp32s2/boards/targett_module_clip_wrover/board.c index f5e66acb6..00b94a025 100644 --- a/ports/esp32s2/boards/targett_module_clip_wrover/board.c +++ b/ports/esp32s2/boards/targett_module_clip_wrover/board.c @@ -34,12 +34,12 @@ void board_init(void) { common_hal_never_reset_pin(&pin_GPIO20); // Debug UART -#ifdef DEBUG + #ifdef DEBUG common_hal_never_reset_pin(&pin_GPIO43); common_hal_never_reset_pin(&pin_GPIO44); -#endif /* DEBUG */ + #endif /* DEBUG */ - //Crystal + // Crystal common_hal_never_reset_pin(&pin_GPIO15); common_hal_never_reset_pin(&pin_GPIO16); } diff --git a/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h b/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h index 3c74d27fa..c36ab50d1 100644 --- a/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h +++ b/ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h @@ -24,14 +24,14 @@ * THE SOFTWARE. */ -//Micropython setup +// Micropython setup -//Same setup as the Saola board but with no Neopixel on board +// Same setup as the Saola board but with no Neopixel on board #define MICROPY_HW_BOARD_NAME "Targett Module Clip w/Wrover" #define MICROPY_HW_MCU_NAME "ESP32S2" -//#define MICROPY_HW_NEOPIXEL (&pin_GPIO18) +// #define MICROPY_HW_NEOPIXEL (&pin_GPIO18) #define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0) diff --git a/ports/esp32s2/boards/targett_module_clip_wrover/pins.c b/ports/esp32s2/boards/targett_module_clip_wrover/pins.c index 99db09645..a8ca8ba3e 100644 --- a/ports/esp32s2/boards/targett_module_clip_wrover/pins.c +++ b/ports/esp32s2/boards/targett_module_clip_wrover/pins.c @@ -43,6 +43,6 @@ STATIC const mp_rom_map_elem_t board_global_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_IO45), MP_ROM_PTR(&pin_GPIO45) }, { MP_ROM_QSTR(MP_QSTR_IO46), MP_ROM_PTR(&pin_GPIO46) }, - //{ MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO18) }, + // { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO18) }, }; MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table); diff --git a/ports/esp32s2/boards/unexpectedmaker_feathers2/board.c b/ports/esp32s2/boards/unexpectedmaker_feathers2/board.c index d8fd3a0a2..a0e399b1e 100644 --- a/ports/esp32s2/boards/unexpectedmaker_feathers2/board.c +++ b/ports/esp32s2/boards/unexpectedmaker_feathers2/board.c @@ -34,10 +34,10 @@ void board_init(void) { common_hal_never_reset_pin(&pin_GPIO20); // Debug UART -#ifdef DEBUG + #ifdef DEBUG common_hal_never_reset_pin(&pin_GPIO43); common_hal_never_reset_pin(&pin_GPIO44); -#endif /* DEBUG */ + #endif /* DEBUG */ // SPI Flash and RAM common_hal_never_reset_pin(&pin_GPIO26); diff --git a/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h b/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h index e100ac118..57f35018d 100644 --- a/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h +++ b/ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h @@ -24,7 +24,7 @@ * THE SOFTWARE. */ -//Micropython setup +// Micropython setup #define MICROPY_HW_BOARD_NAME "FeatherS2" #define MICROPY_HW_MCU_NAME "ESP32S2" diff --git a/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/board.c b/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/board.c index d8fd3a0a2..a0e399b1e 100644 --- a/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/board.c +++ b/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/board.c @@ -34,10 +34,10 @@ void board_init(void) { common_hal_never_reset_pin(&pin_GPIO20); // Debug UART -#ifdef DEBUG + #ifdef DEBUG common_hal_never_reset_pin(&pin_GPIO43); common_hal_never_reset_pin(&pin_GPIO44); -#endif /* DEBUG */ + #endif /* DEBUG */ // SPI Flash and RAM common_hal_never_reset_pin(&pin_GPIO26); diff --git a/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h b/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h index d550ff64f..7304512aa 100644 --- a/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h +++ b/ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h @@ -24,7 +24,7 @@ * THE SOFTWARE. */ -//Micropython setup +// Micropython setup #define MICROPY_HW_BOARD_NAME "FeatherS2 PreRelease" #define MICROPY_HW_MCU_NAME "ESP32S2" diff --git a/ports/esp32s2/boards/unexpectedmaker_tinys2/board.c b/ports/esp32s2/boards/unexpectedmaker_tinys2/board.c index d8fd3a0a2..a0e399b1e 100644 --- a/ports/esp32s2/boards/unexpectedmaker_tinys2/board.c +++ b/ports/esp32s2/boards/unexpectedmaker_tinys2/board.c @@ -34,10 +34,10 @@ void board_init(void) { common_hal_never_reset_pin(&pin_GPIO20); // Debug UART -#ifdef DEBUG + #ifdef DEBUG common_hal_never_reset_pin(&pin_GPIO43); common_hal_never_reset_pin(&pin_GPIO44); -#endif /* DEBUG */ + #endif /* DEBUG */ // SPI Flash and RAM common_hal_never_reset_pin(&pin_GPIO26); diff --git a/ports/esp32s2/boards/unexpectedmaker_tinys2/mpconfigboard.h b/ports/esp32s2/boards/unexpectedmaker_tinys2/mpconfigboard.h index 85f252328..e7d50f089 100644 --- a/ports/esp32s2/boards/unexpectedmaker_tinys2/mpconfigboard.h +++ b/ports/esp32s2/boards/unexpectedmaker_tinys2/mpconfigboard.h @@ -24,7 +24,7 @@ * THE SOFTWARE. */ -//Micropython setup +// Micropython setup #define MICROPY_HW_BOARD_NAME "TinyS2" #define MICROPY_HW_MCU_NAME "ESP32S2" |