3 files changed, 125 insertions, 0 deletions
diff --git a/ports/esp32s2/common-hal/countio/Counter.c b/ports/esp32s2/common-hal/countio/Counter.c
new file mode 100644
index 000000000..fe52d93ad
--- /dev/null
+++ b/ports/esp32s2/common-hal/countio/Counter.c
@@ -0,0 +1,84 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 microDev
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "common-hal/countio/Counter.h"
+#include "common-hal/microcontroller/Pin.h"
+
+#include "py/runtime.h"
+#include "supervisor/shared/translate.h"
+
+void common_hal_countio_counter_construct(countio_counter_obj_t* self,
+    const mcu_pin_obj_t* pin) {
+    claim_pin(pin);
+
+    // Prepare configuration for the PCNT unit
+    const pcnt_config_t pcnt_config = {
+        // Set PCNT input signal and control GPIOs
+        .pulse_gpio_num = pin->number,
+        .ctrl_gpio_num = PCNT_PIN_NOT_USED,
+        .channel = PCNT_CHANNEL_0,
+        // What to do on the positive / negative edge of pulse input?
+        .pos_mode = PCNT_COUNT_INC,   // Count up on the positive edge
+        .neg_mode = PCNT_COUNT_DIS,   // Keep the counter value on the negative edge
+    };
+
+    // Initialize PCNT unit
+    const int8_t unit = peripherals_pcnt_init(pcnt_config);
+    if (unit == -1) {
+        mp_raise_RuntimeError(translate("All PCNT units in use"));
+    }
+
+    self->pin = pin->number;
+    self->unit = (pcnt_unit_t)unit;
+}
+
+bool common_hal_countio_counter_deinited(countio_counter_obj_t* self) {
+    return self->unit == PCNT_UNIT_MAX;
+}
+
+void common_hal_countio_counter_deinit(countio_counter_obj_t* self) {
+    if (common_hal_countio_counter_deinited(self)) {
+        return;
+    }
+    reset_pin_number(self->pin);
+    peripherals_pcnt_deinit(&self->unit);
+}
+
+mp_int_t common_hal_countio_counter_get_count(countio_counter_obj_t* self) {
+    int16_t count;
+    pcnt_get_counter_value(self->unit, &count);
+    return count+self->count;
+}
+
+void common_hal_countio_counter_set_count(countio_counter_obj_t* self,
+        mp_int_t new_count) {
+    self->count = new_count;
+    pcnt_counter_clear(self->unit);
+}
+
+void common_hal_countio_counter_reset(countio_counter_obj_t* self) {
+   common_hal_countio_counter_set_count(self, 0);
+}
diff --git a/ports/esp32s2/common-hal/countio/Counter.h b/ports/esp32s2/common-hal/countio/Counter.h
new file mode 100644
index 000000000..20fe5b83e
--- /dev/null
+++ b/ports/esp32s2/common-hal/countio/Counter.h
@@ -0,0 +1,40 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 microDev
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef MICROPY_INCLUDED_ESP32S2_COMMON_HAL_COUNTIO_COUNTER_H
+#define MICROPY_INCLUDED_ESP32S2_COMMON_HAL_COUNTIO_COUNTER_H
+
+#include "py/obj.h"
+#include "peripherals/pcnt.h"
+
+typedef struct {
+    mp_obj_base_t base;
+    uint8_t pin;
+    mp_int_t count;
+    pcnt_unit_t unit;
+} countio_counter_obj_t;
+
+#endif // MICROPY_INCLUDED_ESP32S2_COMMON_HAL_COUNTIO_COUNT_H
diff --git a/ports/esp32s2/common-hal/countio/__init__.c b/ports/esp32s2/common-hal/countio/__init__.c
new file mode 100644
index 000000000..b95b20d15
--- /dev/null
+++ b/ports/esp32s2/common-hal/countio/__init__.c
@@ -0,0 +1 @@
+//No countio module functions