diff options
Diffstat (limited to 'ports/stm32/boards')
141 files changed, 6362 insertions, 514 deletions
diff --git a/ports/stm32/boards/B_L475E_IOT01A/mpconfigboard.h b/ports/stm32/boards/B_L475E_IOT01A/mpconfigboard.h index 77f029c00..3ab3d5fa1 100644 --- a/ports/stm32/boards/B_L475E_IOT01A/mpconfigboard.h +++ b/ports/stm32/boards/B_L475E_IOT01A/mpconfigboard.h @@ -2,17 +2,9 @@ #define MICROPY_HW_MCU_NAME "STM32L475" #define MICROPY_HW_HAS_SWITCH (1) -#define MICROPY_HW_HAS_FLASH (0) -#define MICROPY_HW_HAS_SDCARD (0) -#define MICROPY_HW_HAS_MMA7660 (0) -#define MICROPY_HW_HAS_LIS3DSH (0) -#define MICROPY_HW_HAS_LCD (0) #define MICROPY_HW_ENABLE_RNG (1) #define MICROPY_HW_ENABLE_RTC (1) -#define MICROPY_HW_ENABLE_TIMER (1) -#define MICROPY_HW_ENABLE_SERVO (0) -#define MICROPY_HW_ENABLE_DAC (0) -#define MICROPY_HW_ENABLE_CAN (0) +#define MICROPY_HW_ENABLE_USB (1) // MSI is used and is 4MHz #define MICROPY_HW_CLK_PLLM (1) @@ -74,3 +66,6 @@ #define MICROPY_HW_LED2 (pin_B14) // green #define MICROPY_HW_LED_ON(pin) (mp_hal_pin_high(pin)) #define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin)) + +// USB config +#define MICROPY_HW_USB_FS (1) diff --git a/ports/stm32/boards/B_L475E_IOT01A/mpconfigboard.mk b/ports/stm32/boards/B_L475E_IOT01A/mpconfigboard.mk index 1ba61a327..55e443e91 100644 --- a/ports/stm32/boards/B_L475E_IOT01A/mpconfigboard.mk +++ b/ports/stm32/boards/B_L475E_IOT01A/mpconfigboard.mk @@ -3,6 +3,7 @@ CMSIS_MCU = STM32L475xx # The stm32l475 does not have a LDC controller which is # the only diffrence to the stm32l476 - so reuse some files. AF_FILE = boards/stm32l476_af.csv -LD_FILE = boards/stm32l476xg.ld -TEXT_ADDR = 0x08004000 +LD_FILES = boards/stm32l476xg.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08004000 OPENOCD_CONFIG = boards/openocd_stm32l4.cfg diff --git a/ports/stm32/boards/B_L475E_IOT01A/stm32l4xx_hal_conf.h b/ports/stm32/boards/B_L475E_IOT01A/stm32l4xx_hal_conf.h index 9348e0679..6bfb28118 100644 --- a/ports/stm32/boards/B_L475E_IOT01A/stm32l4xx_hal_conf.h +++ b/ports/stm32/boards/B_L475E_IOT01A/stm32l4xx_hal_conf.h @@ -45,7 +45,6 @@ extern "C" { #endif -#define USE_USB_FS /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ diff --git a/ports/stm32/boards/CERB40/mpconfigboard.h b/ports/stm32/boards/CERB40/mpconfigboard.h index 284de7a40..7c166922b 100644 --- a/ports/stm32/boards/CERB40/mpconfigboard.h +++ b/ports/stm32/boards/CERB40/mpconfigboard.h @@ -1,20 +1,11 @@ -#define CERB40 - #define MICROPY_HW_BOARD_NAME "Cerb40" #define MICROPY_HW_MCU_NAME "STM32F405RG" -#define MICROPY_HW_HAS_SWITCH (0) #define MICROPY_HW_HAS_FLASH (1) -#define MICROPY_HW_HAS_SDCARD (0) -#define MICROPY_HW_HAS_MMA7660 (0) -#define MICROPY_HW_HAS_LIS3DSH (0) -#define MICROPY_HW_HAS_LCD (0) #define MICROPY_HW_ENABLE_RNG (1) #define MICROPY_HW_ENABLE_RTC (1) -#define MICROPY_HW_ENABLE_TIMER (1) -#define MICROPY_HW_ENABLE_SERVO (0) #define MICROPY_HW_ENABLE_DAC (1) -#define MICROPY_HW_ENABLE_CAN (1) +#define MICROPY_HW_ENABLE_USB (1) // HSE is 12MHz #define MICROPY_HW_CLK_PLLM (12) @@ -58,10 +49,17 @@ #define MICROPY_HW_SPI3_MISO (pin_B4) #define MICROPY_HW_SPI3_MOSI (pin_B5) +// CAN busses +#define MICROPY_HW_CAN1_TX (pin_B9) +#define MICROPY_HW_CAN1_RX (pin_B8) +#define MICROPY_HW_CAN2_TX (pin_B13) +#define MICROPY_HW_CAN2_RX (pin_B12) + // The Cerb40 has No LEDs // The Cerb40 has No SDCard // USB config +#define MICROPY_HW_USB_FS (1) //#define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_A9) //#define MICROPY_HW_USB_OTG_ID_PIN (pin_A10) diff --git a/ports/stm32/boards/CERB40/mpconfigboard.mk b/ports/stm32/boards/CERB40/mpconfigboard.mk index 5734c6690..40972b385 100644 --- a/ports/stm32/boards/CERB40/mpconfigboard.mk +++ b/ports/stm32/boards/CERB40/mpconfigboard.mk @@ -1,4 +1,6 @@ MCU_SERIES = f4 CMSIS_MCU = STM32F405xx AF_FILE = boards/stm32f405_af.csv -LD_FILE = boards/stm32f405.ld +LD_FILES = boards/stm32f405.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08020000 diff --git a/ports/stm32/boards/CERB40/pins.csv b/ports/stm32/boards/CERB40/pins.csv index 411031e8f..cca0bc053 100644 --- a/ports/stm32/boards/CERB40/pins.csv +++ b/ports/stm32/boards/CERB40/pins.csv @@ -44,3 +44,7 @@ UART3_TX,PD8 UART3_RX,PD9 UART3_RTS,PD12 UART3_CTS,PD11 +CAN2_TX,PB13 +CAN2_RX,PB12 +USB_DM,PA11 +USB_DP,PA12 diff --git a/ports/stm32/boards/CERB40/stm32f4xx_hal_conf.h b/ports/stm32/boards/CERB40/stm32f4xx_hal_conf.h index d6aca705c..e71ba3369 100644 --- a/ports/stm32/boards/CERB40/stm32f4xx_hal_conf.h +++ b/ports/stm32/boards/CERB40/stm32f4xx_hal_conf.h @@ -46,8 +46,6 @@ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ -#define USE_USB_FS - /* ########################## Module Selection ############################## */ /** * @brief This is the list of modules to be used in the HAL driver diff --git a/ports/stm32/boards/ESPRUINO_PICO/mpconfigboard.h b/ports/stm32/boards/ESPRUINO_PICO/mpconfigboard.h index d065180d8..53c7f3cd5 100644 --- a/ports/stm32/boards/ESPRUINO_PICO/mpconfigboard.h +++ b/ports/stm32/boards/ESPRUINO_PICO/mpconfigboard.h @@ -9,16 +9,9 @@ #define MICROPY_HW_HAS_SWITCH (1) #define MICROPY_HW_HAS_FLASH (1) -#define MICROPY_HW_HAS_SDCARD (0) -#define MICROPY_HW_HAS_MMA7660 (0) -#define MICROPY_HW_HAS_LIS3DSH (0) -#define MICROPY_HW_HAS_LCD (0) -#define MICROPY_HW_ENABLE_RNG (0) #define MICROPY_HW_ENABLE_RTC (1) -#define MICROPY_HW_ENABLE_TIMER (1) +#define MICROPY_HW_ENABLE_USB (1) #define MICROPY_HW_ENABLE_SERVO (1) -#define MICROPY_HW_ENABLE_DAC (0) -#define MICROPY_HW_ENABLE_CAN (0) // Pico has an 8 MHz HSE and the F401 does 84 MHz max #define MICROPY_HW_CLK_PLLM (5) @@ -70,3 +63,6 @@ #define MICROPY_HW_LED4 (pin_B12) // green #define MICROPY_HW_LED_ON(pin) (mp_hal_pin_high(pin)) #define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin)) + +// USB config +#define MICROPY_HW_USB_FS (1) diff --git a/ports/stm32/boards/ESPRUINO_PICO/mpconfigboard.mk b/ports/stm32/boards/ESPRUINO_PICO/mpconfigboard.mk index d531a594a..16cacc089 100644 --- a/ports/stm32/boards/ESPRUINO_PICO/mpconfigboard.mk +++ b/ports/stm32/boards/ESPRUINO_PICO/mpconfigboard.mk @@ -1,7 +1,9 @@ MCU_SERIES = f4 CMSIS_MCU = STM32F401xE AF_FILE = boards/stm32f401_af.csv -LD_FILE = boards/stm32f401xd.ld +LD_FILES = boards/stm32f401xd.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08020000 # Don't include default frozen modules because MCU is tight on flash space FROZEN_MPY_DIR ?= diff --git a/ports/stm32/boards/ESPRUINO_PICO/stm32f4xx_hal_conf.h b/ports/stm32/boards/ESPRUINO_PICO/stm32f4xx_hal_conf.h index 11a396b73..d27e2e9ef 100644 --- a/ports/stm32/boards/ESPRUINO_PICO/stm32f4xx_hal_conf.h +++ b/ports/stm32/boards/ESPRUINO_PICO/stm32f4xx_hal_conf.h @@ -46,8 +46,6 @@ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ -#define USE_USB_FS - /* ########################## Module Selection ############################## */ /** * @brief This is the list of modules to be used in the HAL driver diff --git a/ports/stm32/boards/HYDRABUS/mpconfigboard.h b/ports/stm32/boards/HYDRABUS/mpconfigboard.h index 38fba9787..2e73d3ec8 100644 --- a/ports/stm32/boards/HYDRABUS/mpconfigboard.h +++ b/ports/stm32/boards/HYDRABUS/mpconfigboard.h @@ -1,20 +1,12 @@ -#define HYDRABUSV10 - #define MICROPY_HW_BOARD_NAME "HydraBus1.0" #define MICROPY_HW_MCU_NAME "STM32F4" #define MICROPY_HW_HAS_SWITCH (1) #define MICROPY_HW_HAS_FLASH (1) #define MICROPY_HW_HAS_SDCARD (1) -#define MICROPY_HW_HAS_MMA7660 (0) -#define MICROPY_HW_HAS_LIS3DSH (0) -#define MICROPY_HW_HAS_LCD (0) #define MICROPY_HW_ENABLE_RNG (1) -#define MICROPY_HW_ENABLE_RTC (0) -#define MICROPY_HW_ENABLE_TIMER (1) -#define MICROPY_HW_ENABLE_SERVO (0) #define MICROPY_HW_ENABLE_DAC (1) -#define MICROPY_HW_ENABLE_CAN (0) +#define MICROPY_HW_ENABLE_USB (1) // HSE is 8MHz #define MICROPY_HW_CLK_PLLM (8) @@ -78,4 +70,5 @@ #define MICROPY_HW_SDCARD_DETECT_PRESENT (1) // USB config +#define MICROPY_HW_USB_FS (1) #define MICROPY_HW_USB_OTG_ID_PIN (pin_A10) diff --git a/ports/stm32/boards/HYDRABUS/mpconfigboard.mk b/ports/stm32/boards/HYDRABUS/mpconfigboard.mk index 5734c6690..40972b385 100644 --- a/ports/stm32/boards/HYDRABUS/mpconfigboard.mk +++ b/ports/stm32/boards/HYDRABUS/mpconfigboard.mk @@ -1,4 +1,6 @@ MCU_SERIES = f4 CMSIS_MCU = STM32F405xx AF_FILE = boards/stm32f405_af.csv -LD_FILE = boards/stm32f405.ld +LD_FILES = boards/stm32f405.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08020000 diff --git a/ports/stm32/boards/HYDRABUS/stm32f4xx_hal_conf.h b/ports/stm32/boards/HYDRABUS/stm32f4xx_hal_conf.h index d3df51c10..daf9b63ce 100644 --- a/ports/stm32/boards/HYDRABUS/stm32f4xx_hal_conf.h +++ b/ports/stm32/boards/HYDRABUS/stm32f4xx_hal_conf.h @@ -46,8 +46,6 @@ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ -#define USE_USB_FS - /* ########################## Module Selection ############################## */ /** * @brief This is the list of modules to be used in the HAL driver diff --git a/ports/stm32/boards/LIMIFROG/board_init.c b/ports/stm32/boards/LIMIFROG/board_init.c index 72f920842..67ccf23cc 100644 --- a/ports/stm32/boards/LIMIFROG/board_init.c +++ b/ports/stm32/boards/LIMIFROG/board_init.c @@ -104,10 +104,10 @@ static void LBF_DFU_If_Needed(void) // Initialize and assert pin BTLE_RST // (hw reset to BLE module, so it won't drive UART3) - __GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_LOW; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; GPIO_InitStruct.Pin = BT_RST_PIN; HAL_GPIO_Init(BT_RST_PORT, &GPIO_InitStruct); @@ -124,7 +124,7 @@ static void LBF_DFU_If_Needed(void) // Initialize Extension Port Position 10 = PB8 (bears I2C1_SCL) // Use weak pull-up to detect if pin is externally pulled low - __GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); GPIO_InitStruct.Mode = GPIO_MODE_INPUT; GPIO_InitStruct.Pull = GPIO_PULLUP; GPIO_InitStruct.Pin = CONN_POS10_PIN; diff --git a/ports/stm32/boards/LIMIFROG/mpconfigboard.h b/ports/stm32/boards/LIMIFROG/mpconfigboard.h index 42b862fcf..d27c2e66e 100644 --- a/ports/stm32/boards/LIMIFROG/mpconfigboard.h +++ b/ports/stm32/boards/LIMIFROG/mpconfigboard.h @@ -3,16 +3,9 @@ #define MICROPY_HW_HAS_SWITCH (1) #define MICROPY_HW_HAS_FLASH (1) -#define MICROPY_HW_HAS_SDCARD (0) -#define MICROPY_HW_HAS_MMA7660 (0) -#define MICROPY_HW_HAS_LIS3DSH (0) -#define MICROPY_HW_HAS_LCD (0) #define MICROPY_HW_ENABLE_RNG (1) #define MICROPY_HW_ENABLE_RTC (1) -#define MICROPY_HW_ENABLE_TIMER (1) -#define MICROPY_HW_ENABLE_SERVO (0) -#define MICROPY_HW_ENABLE_DAC (0) -#define MICROPY_HW_ENABLE_CAN (0) +#define MICROPY_HW_ENABLE_USB (1) #define MICROPY_BOARD_EARLY_INIT LIMIFROG_board_early_init void LIMIFROG_board_early_init(void); @@ -58,4 +51,5 @@ void LIMIFROG_board_early_init(void); #define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin)) // USB config +#define MICROPY_HW_USB_FS (1) // #define MICROPY_HW_USB_OTG_ID_PIN (pin_C12) // This is not the official ID Pin which should be PA10 diff --git a/ports/stm32/boards/LIMIFROG/mpconfigboard.mk b/ports/stm32/boards/LIMIFROG/mpconfigboard.mk index a1304b655..2adc98f0b 100644 --- a/ports/stm32/boards/LIMIFROG/mpconfigboard.mk +++ b/ports/stm32/boards/LIMIFROG/mpconfigboard.mk @@ -1,5 +1,6 @@ MCU_SERIES = l4 CMSIS_MCU = STM32L476xx AF_FILE = boards/stm32l476_af.csv -LD_FILE = boards/stm32l476xe.ld -TEXT_ADDR = 0x08004000 +LD_FILES = boards/stm32l476xe.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08004000 diff --git a/ports/stm32/boards/LIMIFROG/stm32l4xx_hal_conf.h b/ports/stm32/boards/LIMIFROG/stm32l4xx_hal_conf.h index 9348e0679..6bfb28118 100644 --- a/ports/stm32/boards/LIMIFROG/stm32l4xx_hal_conf.h +++ b/ports/stm32/boards/LIMIFROG/stm32l4xx_hal_conf.h @@ -45,7 +45,6 @@ extern "C" { #endif -#define USE_USB_FS /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ diff --git a/ports/stm32/boards/NETDUINO_PLUS_2/board_init.c b/ports/stm32/boards/NETDUINO_PLUS_2/board_init.c index 085034b2d..53df72503 100644 --- a/ports/stm32/boards/NETDUINO_PLUS_2/board_init.c +++ b/ports/stm32/boards/NETDUINO_PLUS_2/board_init.c @@ -2,11 +2,11 @@ void NETDUINO_PLUS_2_board_early_init(void) { - __GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); // Turn off the backlight. LCD_BL_CTRL = PK3 GPIO_InitTypeDef GPIO_InitStructure; - GPIO_InitStructure.Speed = GPIO_SPEED_HIGH; + GPIO_InitStructure.Speed = GPIO_SPEED_FREQ_VERY_HIGH; GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP; GPIO_InitStructure.Pull = GPIO_PULLUP; diff --git a/ports/stm32/boards/NETDUINO_PLUS_2/mpconfigboard.h b/ports/stm32/boards/NETDUINO_PLUS_2/mpconfigboard.h index 9586ae4e5..312576756 100644 --- a/ports/stm32/boards/NETDUINO_PLUS_2/mpconfigboard.h +++ b/ports/stm32/boards/NETDUINO_PLUS_2/mpconfigboard.h @@ -8,15 +8,9 @@ // SPI, so the driver needs to be converted to support that before // we can turn this on. #define MICROPY_HW_HAS_SDCARD (0) -#define MICROPY_HW_HAS_MMA7660 (0) -#define MICROPY_HW_HAS_LIS3DSH (0) -#define MICROPY_HW_HAS_LCD (0) #define MICROPY_HW_ENABLE_RNG (1) -#define MICROPY_HW_ENABLE_RTC (0) -#define MICROPY_HW_ENABLE_TIMER (1) +#define MICROPY_HW_ENABLE_USB (1) #define MICROPY_HW_ENABLE_SERVO (1) -#define MICROPY_HW_ENABLE_DAC (0) -#define MICROPY_HW_ENABLE_CAN (0) void NETDUINO_PLUS_2_board_early_init(void); #define MICROPY_BOARD_EARLY_INIT NETDUINO_PLUS_2_board_early_init @@ -69,5 +63,6 @@ void NETDUINO_PLUS_2_board_early_init(void); #define MICROPY_HW_LED_ON(pin) (mp_hal_pin_high(pin)) #define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin)) -// USB VBUS detect pin +// USB config +#define MICROPY_HW_USB_FS (1) #define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_A9) diff --git a/ports/stm32/boards/NETDUINO_PLUS_2/mpconfigboard.mk b/ports/stm32/boards/NETDUINO_PLUS_2/mpconfigboard.mk index 5734c6690..40972b385 100644 --- a/ports/stm32/boards/NETDUINO_PLUS_2/mpconfigboard.mk +++ b/ports/stm32/boards/NETDUINO_PLUS_2/mpconfigboard.mk @@ -1,4 +1,6 @@ MCU_SERIES = f4 CMSIS_MCU = STM32F405xx AF_FILE = boards/stm32f405_af.csv -LD_FILE = boards/stm32f405.ld +LD_FILES = boards/stm32f405.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08020000 diff --git a/ports/stm32/boards/NETDUINO_PLUS_2/pins.csv b/ports/stm32/boards/NETDUINO_PLUS_2/pins.csv index 3e71fade6..53ffa9d1f 100644 --- a/ports/stm32/boards/NETDUINO_PLUS_2/pins.csv +++ b/ports/stm32/boards/NETDUINO_PLUS_2/pins.csv @@ -33,3 +33,5 @@ UART3_RX,PD9 UART3_RTS,PD12 UART3_CTS,PD11 UART5_TX,PC12 +USB_DM,PA11 +USB_DP,PA12 diff --git a/ports/stm32/boards/NETDUINO_PLUS_2/stm32f4xx_hal_conf.h b/ports/stm32/boards/NETDUINO_PLUS_2/stm32f4xx_hal_conf.h index 42c2c4e9b..4cb5a83e4 100644 --- a/ports/stm32/boards/NETDUINO_PLUS_2/stm32f4xx_hal_conf.h +++ b/ports/stm32/boards/NETDUINO_PLUS_2/stm32f4xx_hal_conf.h @@ -46,8 +46,6 @@ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ -#define USE_USB_FS - /* ########################## Module Selection ############################## */ /** * @brief This is the list of modules to be used in the HAL driver diff --git a/ports/stm32/boards/NUCLEO_F091RC/mpconfigboard.h b/ports/stm32/boards/NUCLEO_F091RC/mpconfigboard.h new file mode 100644 index 000000000..3546d521b --- /dev/null +++ b/ports/stm32/boards/NUCLEO_F091RC/mpconfigboard.h @@ -0,0 +1,59 @@ +#define MICROPY_HW_BOARD_NAME "NUCLEO-F091RC" +#define MICROPY_HW_MCU_NAME "STM32F091RCT6" + +#define MICROPY_EMIT_THUMB (0) +#define MICROPY_EMIT_INLINE_THUMB (0) +#define MICROPY_PY_USOCKET (0) +#define MICROPY_PY_NETWORK (0) +#define MICROPY_PY_STM (0) +#define MICROPY_PY_PYB_LEGACY (0) +#define MICROPY_VFS_FAT (0) + +#define MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE (0) +#define MICROPY_HW_ENABLE_RTC (1) +#define MICROPY_HW_ENABLE_ADC (1) +#define MICROPY_HW_ENABLE_DAC (1) +#define MICROPY_HW_ENABLE_TIMER (1) +#define MICROPY_HW_HAS_SWITCH (1) + +// For system clock, board uses internal 48MHz, HSI48 + +// The board has an external 32kHz crystal +#define MICROPY_HW_RTC_USE_LSE (1) + +// UART config +#define MICROPY_HW_UART1_TX (pin_B6) +#define MICROPY_HW_UART1_RX (pin_B7) +#define MICROPY_HW_UART2_TX (pin_A2) +#define MICROPY_HW_UART2_RX (pin_A3) + +// USART2 is connected to the ST-LINK USB VCP +#define MICROPY_HW_UART_REPL PYB_UART_2 +#define MICROPY_HW_UART_REPL_BAUD 115200 + +// I2C busses +#define MICROPY_HW_I2C1_SCL (pin_B8) // Arduino D15, pin 3 on CN10 +#define MICROPY_HW_I2C1_SDA (pin_B9) // Arduino D14, pin 5 on CN10 +#define MICROPY_HW_I2C2_SCL (pin_B10) // Arduino D6, pin 25 on CN10 +#define MICROPY_HW_I2C2_SDA (pin_B11) // pin 18 on CN10 + +// SPI busses +#define MICROPY_HW_SPI1_NSS (pin_A15) // pin 17 on CN7 +#define MICROPY_HW_SPI1_SCK (pin_A5) // Arduino D13, pin 11 on CN10 +#define MICROPY_HW_SPI1_MISO (pin_A6) // Arduino D12, pin 13 on CN10 +#define MICROPY_HW_SPI1_MOSI (pin_A7) // Arduino D11, pin 15 on CN10 +#define MICROPY_HW_SPI2_NSS (pin_B12) // pin 16 on CN10 +#define MICROPY_HW_SPI2_SCK (pin_B13) // pin 30 on CN10 +#define MICROPY_HW_SPI2_MISO (pin_B14) // pin 28 on CN10 +#define MICROPY_HW_SPI2_MOSI (pin_B15) // pin 26 on CN10 + +// USER B1 has a pull-up and is active low +#define MICROPY_HW_USRSW_PIN (pin_C13) +#define MICROPY_HW_USRSW_PULL (0) +#define MICROPY_HW_USRSW_EXTI_MODE (GPIO_MODE_IT_FALLING) +#define MICROPY_HW_USRSW_PRESSED (0) + +// NUCLEO-64 has one user LED +#define MICROPY_HW_LED1 (pin_A5) // green +#define MICROPY_HW_LED_ON(pin) (mp_hal_pin_high(pin)) +#define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin)) diff --git a/ports/stm32/boards/NUCLEO_F091RC/mpconfigboard.mk b/ports/stm32/boards/NUCLEO_F091RC/mpconfigboard.mk new file mode 100644 index 000000000..1d66f7e6b --- /dev/null +++ b/ports/stm32/boards/NUCLEO_F091RC/mpconfigboard.mk @@ -0,0 +1,7 @@ +MCU_SERIES = f0 +CMSIS_MCU = STM32F091xC +AF_FILE = boards/stm32f091_af.csv +LD_FILES = boards/stm32f091xc.ld boards/common_basic.ld + +# Don't include default frozen modules because MCU is tight on flash space +FROZEN_MPY_DIR ?= diff --git a/ports/stm32/boards/NUCLEO_F091RC/pins.csv b/ports/stm32/boards/NUCLEO_F091RC/pins.csv new file mode 100644 index 000000000..36d314108 --- /dev/null +++ b/ports/stm32/boards/NUCLEO_F091RC/pins.csv @@ -0,0 +1,87 @@ +D0,PA3 +D1,PA2 +D2,PA10 +D3,PB3 +D4,PB5 +D5,PB4 +D6,PB10 +D7,PA8 +D8,PA9 +D9,PC7 +D10,PB6 +D11,PA7 +D12,PA6 +D13,PA5 +D14,PB9 +D15,PB8 +A0,PA0 +A1,PA1 +A2,PA4 +A3,PB0 +A4,PC1 +A5,PC0 +RX,PA3 +TX,PA2 +SCL,PB8 +SDA,PB9 +SCK,PA5 +MISO,PA6 +MOSI,PA7 +CS,PB6 +BOOT0,PF11 +SWDIO,PA13 +SWCLK,PA14 +USER_B1,PC13 +LED_GREEN,PA5 +PA0,PA0 +PA1,PA1 +PA2,PA2 +PA3,PA3 +PA4,PA4 +PA5,PA5 +PA6,PA6 +PA7,PA7 +PA8,PA8 +PA9,PA9 +PA10,PA10 +PA11,PA11 +PA12,PA12 +PA13,PA13 +PA14,PA14 +PA15,PA15 +PB0,PB0 +PB1,PB1 +PB2,PB2 +PB3,PB3 +PB4,PB4 +PB5,PB5 +PB6,PB6 +PB7,PB7 +PB8,PB8 +PB9,PB9 +PB10,PB10 +PB11,PB11 +PB12,PB12 +PB13,PB13 +PB14,PB14 +PB15,PB15 +PC0,PC0 +PC1,PC1 +PC2,PC2 +PC3,PC3 +PC4,PC4 +PC5,PC5 +PC6,PC6 +PC7,PC7 +PC8,PC8 +PC9,PC9 +PC10,PC10 +PC11,PC11 +PC12,PC12 +PC13,PC13 +PC14,PC14 +PC15,PC15 +PD2,PD2 +PF0,PF0 +PF1,PF1 +PF11,PF11 diff --git a/ports/stm32/boards/NUCLEO_F091RC/stm32f0xx_hal_conf.h b/ports/stm32/boards/NUCLEO_F091RC/stm32f0xx_hal_conf.h new file mode 100644 index 000000000..53ea047cb --- /dev/null +++ b/ports/stm32/boards/NUCLEO_F091RC/stm32f0xx_hal_conf.h @@ -0,0 +1,312 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_conf_template.h + * @author MCD Application Team + * @brief HAL configuration template file. + * This file should be copied to the application folder and renamed + * to stm32f0xx_hal_conf.h. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_CONF_H +#define __STM32F0xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +#define HAL_CAN_MODULE_ENABLED +#define HAL_CEC_MODULE_ENABLED +#define HAL_COMP_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CRC_MODULE_ENABLED +#define HAL_DAC_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#define HAL_I2S_MODULE_ENABLED +#define HAL_IRDA_MODULE_ENABLED +#define HAL_IWDG_MODULE_ENABLED +#define HAL_PCD_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_RTC_MODULE_ENABLED +#define HAL_SMARTCARD_MODULE_ENABLED +#define HAL_SMBUS_MODULE_ENABLED +#define HAL_SPI_MODULE_ENABLED +#define HAL_TIM_MODULE_ENABLED +#define HAL_TSC_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +#define HAL_USART_MODULE_ENABLED +#define HAL_WWDG_MODULE_ENABLED + +/* ######################### Oscillator Values adaptation ################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +/** + * @brief In the following line adjust the External High Speed oscillator (HSE) Startup + * Timeout value + */ +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup + * Timeout value + */ +#if !defined (HSI_STARTUP_TIMEOUT) + #define HSI_STARTUP_TIMEOUT 5000U /*!< Time out for HSI start up */ +#endif /* HSI_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator for ADC (HSI14) value. + */ +#if !defined (HSI14_VALUE) + #define HSI14_VALUE 14000000U /*!< Value of the Internal High Speed oscillator for ADC in Hz. + The real value may vary depending on the variations + in voltage and temperature. */ +#endif /* HSI14_VALUE */ + +/** + * @brief Internal High Speed oscillator for USB (HSI48) value. + */ +#if !defined (HSI48_VALUE) + #define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB in Hz. + The real value may vary depending on the variations + in voltage and temperature. */ +#endif /* HSI48_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE 40000U +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +/** + * @brief Time out for LSE start up value in ms. + */ +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE 3300U /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0x00) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 0U +#define DATA_CACHE_ENABLE 0U +#define USE_SPI_CRC 1U + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/*#define USE_FULL_ASSERT 1*/ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f0xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f0xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f0xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f0xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f0xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f0xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f0xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32f0xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f0xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f0xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f0xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f0xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f0xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f0xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f0xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f0xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f0xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f0xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f0xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32f0xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f0xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f0xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_TSC_MODULE_ENABLED + #include "stm32f0xx_hal_tsc.h" +#endif /* HAL_TSC_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f0xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f0xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f0xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((char *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(char* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/ports/stm32/boards/NUCLEO_F401RE/mpconfigboard.mk b/ports/stm32/boards/NUCLEO_F401RE/mpconfigboard.mk index eb391bed7..4c3022f54 100644 --- a/ports/stm32/boards/NUCLEO_F401RE/mpconfigboard.mk +++ b/ports/stm32/boards/NUCLEO_F401RE/mpconfigboard.mk @@ -1,4 +1,6 @@ MCU_SERIES = f4 CMSIS_MCU = STM32F401xE AF_FILE = boards/stm32f401_af.csv -LD_FILE = boards/stm32f401xe.ld +LD_FILES = boards/stm32f401xe.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08020000 diff --git a/ports/stm32/boards/NUCLEO_F401RE/stm32f4xx_hal_conf.h b/ports/stm32/boards/NUCLEO_F401RE/stm32f4xx_hal_conf.h index f4db4cb63..daf9b63ce 100644 --- a/ports/stm32/boards/NUCLEO_F401RE/stm32f4xx_hal_conf.h +++ b/ports/stm32/boards/NUCLEO_F401RE/stm32f4xx_hal_conf.h @@ -46,10 +46,6 @@ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ -// This board doesn't really have USB, but the stm32 codebase doesn't build -// without some USB defined, so we leave this on for now. -#define USE_USB_FS - /* ########################## Module Selection ############################## */ /** * @brief This is the list of modules to be used in the HAL driver diff --git a/ports/stm32/boards/NUCLEO_F411RE/mpconfigboard.mk b/ports/stm32/boards/NUCLEO_F411RE/mpconfigboard.mk index 71b3b19d6..df9506522 100644 --- a/ports/stm32/boards/NUCLEO_F411RE/mpconfigboard.mk +++ b/ports/stm32/boards/NUCLEO_F411RE/mpconfigboard.mk @@ -1,4 +1,6 @@ MCU_SERIES = f4 CMSIS_MCU = STM32F411xE AF_FILE = boards/stm32f411_af.csv -LD_FILE = boards/stm32f411.ld +LD_FILES = boards/stm32f411.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08020000 diff --git a/ports/stm32/boards/NUCLEO_F411RE/stm32f4xx_hal_conf.h b/ports/stm32/boards/NUCLEO_F411RE/stm32f4xx_hal_conf.h index 0c424888f..8f0b66381 100644 --- a/ports/stm32/boards/NUCLEO_F411RE/stm32f4xx_hal_conf.h +++ b/ports/stm32/boards/NUCLEO_F411RE/stm32f4xx_hal_conf.h @@ -46,10 +46,6 @@ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ -// This board doesn't really have USB, but the stm32 codebase doesn't build -// without some USB defined, so we leave this on for now. -#define USE_USB_FS - /* ########################## Module Selection ############################## */ /** * @brief This is the list of modules to be used in the HAL driver diff --git a/ports/stm32/boards/NUCLEO_F429ZI/mpconfigboard.h b/ports/stm32/boards/NUCLEO_F429ZI/mpconfigboard.h index 42cc9d68c..17883a192 100644 --- a/ports/stm32/boards/NUCLEO_F429ZI/mpconfigboard.h +++ b/ports/stm32/boards/NUCLEO_F429ZI/mpconfigboard.h @@ -3,22 +3,15 @@ #define MICROPY_HW_HAS_SWITCH (1) #define MICROPY_HW_HAS_FLASH (1) -#define MICROPY_HW_HAS_SDCARD (0) -#define MICROPY_HW_HAS_MMA7660 (0) -#define MICROPY_HW_HAS_LIS3DSH (0) -#define MICROPY_HW_HAS_LCD (0) #define MICROPY_HW_ENABLE_RNG (1) #define MICROPY_HW_ENABLE_RTC (1) -#define MICROPY_HW_ENABLE_TIMER (1) -#define MICROPY_HW_ENABLE_SERVO (0) -#define MICROPY_HW_ENABLE_DAC (0) -#define MICROPY_HW_ENABLE_CAN (1) +#define MICROPY_HW_ENABLE_USB (1) // HSE is 8MHz #define MICROPY_HW_CLK_PLLM (8) -#define MICROPY_HW_CLK_PLLN (180) +#define MICROPY_HW_CLK_PLLN (336) #define MICROPY_HW_CLK_PLLP (RCC_PLLP_DIV2) -#define MICROPY_HW_CLK_PLLQ (4) +#define MICROPY_HW_CLK_PLLQ (7) // From the reference manual, for 2.7V to 3.6V // 151-180 MHz => 5 wait states @@ -65,6 +58,12 @@ #define MICROPY_HW_SPI5_MISO (pin_F8) #define MICROPY_HW_SPI5_MOSI (pin_F9) +// CAN busses +#define MICROPY_HW_CAN1_TX (pin_B9) +#define MICROPY_HW_CAN1_RX (pin_B8) +#define MICROPY_HW_CAN2_TX (pin_B13) +#define MICROPY_HW_CAN2_RX (pin_B12) + // USRSW is pulled low. Pressing the button makes the input go high. #define MICROPY_HW_USRSW_PIN (pin_C13) #define MICROPY_HW_USRSW_PULL (GPIO_NOPULL) @@ -79,5 +78,6 @@ #define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin)) // USB config (CN13 - USB OTG FS) +#define MICROPY_HW_USB_FS (1) #define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_A9) #define MICROPY_HW_USB_OTG_ID_PIN (pin_A10) diff --git a/ports/stm32/boards/NUCLEO_F429ZI/mpconfigboard.mk b/ports/stm32/boards/NUCLEO_F429ZI/mpconfigboard.mk index 1bbf808b6..d19a35c31 100644 --- a/ports/stm32/boards/NUCLEO_F429ZI/mpconfigboard.mk +++ b/ports/stm32/boards/NUCLEO_F429ZI/mpconfigboard.mk @@ -1,4 +1,6 @@ MCU_SERIES = f4 CMSIS_MCU = STM32F429xx AF_FILE = boards/stm32f429_af.csv -LD_FILE = boards/stm32f429.ld +LD_FILES = boards/stm32f429.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08020000 diff --git a/ports/stm32/boards/NUCLEO_F429ZI/stm32f4xx_hal_conf.h b/ports/stm32/boards/NUCLEO_F429ZI/stm32f4xx_hal_conf.h index d121b18c5..5b5a8a3e4 100644 --- a/ports/stm32/boards/NUCLEO_F429ZI/stm32f4xx_hal_conf.h +++ b/ports/stm32/boards/NUCLEO_F429ZI/stm32f4xx_hal_conf.h @@ -46,8 +46,6 @@ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ -#define USE_USB_FS - /* ########################## Module Selection ############################## */ /** * @brief This is the list of modules to be used in the HAL driver diff --git a/ports/stm32/boards/NUCLEO_F446RE/mpconfigboard.mk b/ports/stm32/boards/NUCLEO_F446RE/mpconfigboard.mk index e1ec6d57c..64a80e992 100644 --- a/ports/stm32/boards/NUCLEO_F446RE/mpconfigboard.mk +++ b/ports/stm32/boards/NUCLEO_F446RE/mpconfigboard.mk @@ -1,4 +1,6 @@ MCU_SERIES = f4 CMSIS_MCU = STM32F446xx AF_FILE = boards/stm32f429_af.csv -LD_FILE = boards/stm32f411.ld +LD_FILES = boards/stm32f411.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08020000 diff --git a/ports/stm32/boards/NUCLEO_F446RE/stm32f4xx_hal_conf.h b/ports/stm32/boards/NUCLEO_F446RE/stm32f4xx_hal_conf.h index 487ca009f..245fb9a06 100644 --- a/ports/stm32/boards/NUCLEO_F446RE/stm32f4xx_hal_conf.h +++ b/ports/stm32/boards/NUCLEO_F446RE/stm32f4xx_hal_conf.h @@ -46,10 +46,6 @@ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ -// This board doesn't really have USB, but the stm32 codebase doesn't build -// without some USB defined, so we leave this on for now. -#define USE_USB_FS - /* ########################## Module Selection ############################## */ /** * @brief This is the list of modules to be used in the HAL driver diff --git a/ports/stm32/boards/NUCLEO_F746ZG/mpconfigboard.h b/ports/stm32/boards/NUCLEO_F746ZG/mpconfigboard.h new file mode 100644 index 000000000..a9fbea576 --- /dev/null +++ b/ports/stm32/boards/NUCLEO_F746ZG/mpconfigboard.h @@ -0,0 +1,77 @@ +// This board is only confirmed to operate using DFU mode and openocd. +// DFU mode can be accessed by setting BOOT0 (see schematics) +// To use openocd run "OPENOCD_CONFIG=boards/openocd_stm32f7.cfg" in +// the make command. + +#define MICROPY_HW_BOARD_NAME "NUCLEO-F746ZG" +#define MICROPY_HW_MCU_NAME "STM32F746" + +#define MICROPY_HW_HAS_SWITCH (1) +#define MICROPY_HW_HAS_FLASH (1) +#define MICROPY_HW_ENABLE_RNG (1) +#define MICROPY_HW_ENABLE_RTC (1) +#define MICROPY_HW_ENABLE_DAC (1) +#define MICROPY_HW_ENABLE_USB (1) + +// HSE is 8MHz +// VCOClock = HSE * PLLN / PLLM = 8 MHz * 216 / 4 = 432 MHz +// SYSCLK = VCOClock / PLLP = 432 MHz / 2 = 216 MHz +// USB/SDMMC/RNG Clock = VCOClock / PLLQ = 432 MHz / 9 = 48 MHz +#define MICROPY_HW_CLK_PLLM (4) +#define MICROPY_HW_CLK_PLLN (216) +#define MICROPY_HW_CLK_PLLP (RCC_PLLP_DIV2) +#define MICROPY_HW_CLK_PLLQ (9) + +// From the reference manual, for 2.7V to 3.6V +// 151-180 MHz => 5 wait states +// 181-210 MHz => 6 wait states +// 211-216 MHz => 7 wait states +#define MICROPY_HW_FLASH_LATENCY FLASH_LATENCY_7 // 210-216 MHz needs 7 wait states + +// UART config +#define MICROPY_HW_UART2_TX (pin_D5) +#define MICROPY_HW_UART2_RX (pin_D6) +#define MICROPY_HW_UART2_RTS (pin_D4) +#define MICROPY_HW_UART2_CTS (pin_D3) +#define MICROPY_HW_UART3_TX (pin_D8) +#define MICROPY_HW_UART3_RX (pin_D9) +#define MICROPY_HW_UART6_TX (pin_G14) +#define MICROPY_HW_UART6_RX (pin_G9) +#define MICROPY_HW_UART_REPL PYB_UART_3 +#define MICROPY_HW_UART_REPL_BAUD 115200 + +// I2C busses +#define MICROPY_HW_I2C1_SCL (pin_B8) +#define MICROPY_HW_I2C1_SDA (pin_B9) +#define MICROPY_HW_I2C3_SCL (pin_H7) +#define MICROPY_HW_I2C3_SDA (pin_H8) + +// SPI +#define MICROPY_HW_SPI3_NSS (pin_A4) +#define MICROPY_HW_SPI3_SCK (pin_B3) +#define MICROPY_HW_SPI3_MISO (pin_B4) +#define MICROPY_HW_SPI3_MOSI (pin_B5) + +// CAN busses +#define MICROPY_HW_CAN1_TX (pin_B9) +#define MICROPY_HW_CAN1_RX (pin_B8) +#define MICROPY_HW_CAN2_TX (pin_B13) +#define MICROPY_HW_CAN2_RX (pin_B12) + +// USRSW is pulled low. Pressing the button makes the input go high. +#define MICROPY_HW_USRSW_PIN (pin_C13) +#define MICROPY_HW_USRSW_PULL (GPIO_NOPULL) +#define MICROPY_HW_USRSW_EXTI_MODE (GPIO_MODE_IT_RISING) +#define MICROPY_HW_USRSW_PRESSED (1) + +// LEDs +#define MICROPY_HW_LED1 (pin_B0) // green +#define MICROPY_HW_LED2 (pin_B7) // blue +#define MICROPY_HW_LED3 (pin_B14) // red +#define MICROPY_HW_LED_ON(pin) (mp_hal_pin_high(pin)) +#define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin)) + +// USB config (CN13 - USB OTG FS) +#define MICROPY_HW_USB_FS (1) +#define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_A9) +#define MICROPY_HW_USB_OTG_ID_PIN (pin_A10) diff --git a/ports/stm32/boards/NUCLEO_F746ZG/mpconfigboard.mk b/ports/stm32/boards/NUCLEO_F746ZG/mpconfigboard.mk new file mode 100644 index 000000000..160218fd3 --- /dev/null +++ b/ports/stm32/boards/NUCLEO_F746ZG/mpconfigboard.mk @@ -0,0 +1,6 @@ +MCU_SERIES = f7 +CMSIS_MCU = STM32F746xx +AF_FILE = boards/stm32f746_af.csv +LD_FILES = boards/stm32f746.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08020000 diff --git a/ports/stm32/boards/NUCLEO_F746ZG/pins.csv b/ports/stm32/boards/NUCLEO_F746ZG/pins.csv new file mode 100644 index 000000000..aa5143e8c --- /dev/null +++ b/ports/stm32/boards/NUCLEO_F746ZG/pins.csv @@ -0,0 +1,68 @@ +A0,PA3 +A1,PC0 +A2,PC3 +A3,PF3 +A4,PF5 +A5,PF10 +D0,PG9 +D1,PG14 +D2,PF15 +D3,PE13 +D4,PF14 +D5,PE11 +D6,PE9 +D7,PF13 +D8,PF12 +D9,PD15 +D10,PD14 +D11,PA7 +D12,PA6 +D13,PA5 +D14,PB9 +D15,PB8 +D16,PC6 +D17,PB15 +D18,PB13 +D19,PB12 +D20,PA15 +D21,PC7 +D22,PB5 +D23,PB3 +D24,PA4 +D25,PB4 +LED1,PB0 +LED2,PB7 +LED3,PB14 +SW,PC13 +TP1,PH2 +TP2,PI8 +TP3,PH15 +AUDIO_INT,PD6 +AUDIO_SDA,PH8 +AUDIO_SCL,PH7 +EXT_SDA,PB9 +EXT_SCL,PB8 +EXT_RST,PG3 +SD_SW,PC13 +LCD_BL_CTRL,PK3 +LCD_INT,PI13 +LCD_SDA,PH8 +LCD_SCL,PH7 +OTG_FS_POWER,PD5 +OTG_FS_OVER_CURRENT,PD4 +OTG_HS_OVER_CURRENT,PE3 +USB_VBUS,PA9 +USB_ID,PA10 +USB_DM,PA11 +USB_DP,PA12 +VCP_TX,PD8 +VCP_RX,PD9 +UART2_TX,PD5 +UART2_RX,PD6 +UART2_RTS,PD4 +UART2_CTS,PD3 +UART6_TX,PG14 +UART6_RX,PG9 +SPI_B_NSS,PA4 +SPI_B_SCK,PB3 +SPI_B_MOSI,PB5 diff --git a/ports/stm32/boards/NUCLEO_F746ZG/stm32f7xx_hal_conf.h b/ports/stm32/boards/NUCLEO_F746ZG/stm32f7xx_hal_conf.h new file mode 100644 index 000000000..a019ee4ce --- /dev/null +++ b/ports/stm32/boards/NUCLEO_F746ZG/stm32f7xx_hal_conf.h @@ -0,0 +1,427 @@ +/** + ****************************************************************************** + * @file stm32f7xx_hal_conf.h + * @author MCD Application Team + * @version V1.0.1 + * @date 25-June-2015 + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F7xx_HAL_CONF_H +#define __STM32F7xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +#define HAL_CAN_MODULE_ENABLED +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +#define HAL_DAC_MODULE_ENABLED +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +#define HAL_FLASH_MODULE_ENABLED +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#define HAL_I2S_MODULE_ENABLED +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +#define HAL_PWR_MODULE_ENABLED +/* #define HAL_QSPI_MODULE_ENABLED */ +#define HAL_RCC_MODULE_ENABLED +#define HAL_RNG_MODULE_ENABLED +#define HAL_RTC_MODULE_ENABLED +/* #define HAL_SAI_MODULE_ENABLED */ +#define HAL_SD_MODULE_ENABLED +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +#define HAL_SPI_MODULE_ENABLED +#define HAL_TIM_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_PCD_MODULE_ENABLED +/* #define HAL_HCD_MODULE_ENABLED */ + + +/* ########################## Timeout Configuration ######################### */ +/** + * @brief This is the HAL configuration section + */ +#define HAL_ACCURATE_TIMEOUT_ENABLED 0 +#define HAL_TIMEOUT_VALUE 0x1FFFFFF + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)32000) +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0x00) /*!< tick interrupt priority */ +#define USE_RTOS 0 +#define ART_ACCLERATOR_ENABLE 1 /* To enable instruction cache and prefetch */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + +/* ################## Ethernet peripheral configuration ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2 +#define MAC_ADDR1 1 +#define MAC_ADDR2 0 +#define MAC_ADDR3 0 +#define MAC_ADDR4 0 +#define MAC_ADDR5 0 + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB ((uint32_t)5) /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB ((uint32_t)5) /* 5 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ +/* LAN8742A PHY Address*/ +#define LAN8742A_PHY_ADDRESS 0x00 +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY ((uint32_t)0x00000FFF) +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFF) + +#define PHY_READ_TO ((uint32_t)0x0000FFFF) +#define PHY_WRITE_TO ((uint32_t)0x0000FFFF) + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ + +#define PHY_SR ((uint16_t)0x10) /*!< PHY status register Offset */ +#define PHY_MICR ((uint16_t)0x11) /*!< MII Interrupt Control Register */ +#define PHY_MISR ((uint16_t)0x12) /*!< MII Interrupt Status and Misc. Control Register */ + +#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ +#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ + +#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ +#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ + +#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ +#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f7xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f7xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f7xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f7xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f7xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f7xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f7xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f7xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f7xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f7xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f7xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f7xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f7xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f7xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f7xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f7xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f7xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f7xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f7xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f7xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f7xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f7xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32f7xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f7xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f7xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32f7xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f7xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f7xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f7xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f7xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32f7xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f7xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f7xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f7xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f7xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f7xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f7xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f7xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f7xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f7xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F7xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/ports/stm32/boards/NUCLEO_F767ZI/board_init.c b/ports/stm32/boards/NUCLEO_F767ZI/board_init.c new file mode 100644 index 000000000..7d25a445d --- /dev/null +++ b/ports/stm32/boards/NUCLEO_F767ZI/board_init.c @@ -0,0 +1,8 @@ +#include "py/mphal.h" + +void NUCLEO_F767ZI_board_early_init(void) { + // Turn off the USB switch + #define USB_PowerSwitchOn pin_G6 + mp_hal_pin_output(USB_PowerSwitchOn); + mp_hal_pin_low(USB_PowerSwitchOn); +} diff --git a/ports/stm32/boards/NUCLEO_F767ZI/mpconfigboard.h b/ports/stm32/boards/NUCLEO_F767ZI/mpconfigboard.h index 8952bce82..3f23d77d4 100644 --- a/ports/stm32/boards/NUCLEO_F767ZI/mpconfigboard.h +++ b/ports/stm32/boards/NUCLEO_F767ZI/mpconfigboard.h @@ -8,16 +8,13 @@ #define MICROPY_HW_HAS_SWITCH (1) #define MICROPY_HW_HAS_FLASH (1) -#define MICROPY_HW_HAS_SDCARD (0) -#define MICROPY_HW_HAS_MMA7660 (0) -#define MICROPY_HW_HAS_LIS3DSH (0) -#define MICROPY_HW_HAS_LCD (0) #define MICROPY_HW_ENABLE_RNG (1) #define MICROPY_HW_ENABLE_RTC (1) -#define MICROPY_HW_ENABLE_TIMER (1) -#define MICROPY_HW_ENABLE_SERVO (0) #define MICROPY_HW_ENABLE_DAC (1) -#define MICROPY_HW_ENABLE_CAN (1) +#define MICROPY_HW_ENABLE_USB (1) + +#define MICROPY_BOARD_EARLY_INIT NUCLEO_F767ZI_board_early_init +void NUCLEO_F767ZI_board_early_init(void); // HSE is 25MHz // VCOClock = HSE * PLLN / PLLM = 25 MHz * 432 / 25 = 432 MHz @@ -58,6 +55,12 @@ #define MICROPY_HW_SPI3_MISO (pin_B4) #define MICROPY_HW_SPI3_MOSI (pin_B5) +// CAN busses +#define MICROPY_HW_CAN1_TX (pin_B9) +#define MICROPY_HW_CAN1_RX (pin_B8) +#define MICROPY_HW_CAN2_TX (pin_B13) +#define MICROPY_HW_CAN2_RX (pin_B12) + // USRSW is pulled low. Pressing the button makes the input go high. #define MICROPY_HW_USRSW_PIN (pin_C13) #define MICROPY_HW_USRSW_PULL (GPIO_NOPULL) @@ -72,5 +75,6 @@ #define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin)) // USB config (CN13 - USB OTG FS) +#define MICROPY_HW_USB_FS (1) #define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_A9) #define MICROPY_HW_USB_OTG_ID_PIN (pin_A10) diff --git a/ports/stm32/boards/NUCLEO_F767ZI/mpconfigboard.mk b/ports/stm32/boards/NUCLEO_F767ZI/mpconfigboard.mk index ba28a16e1..b79ee7da2 100644 --- a/ports/stm32/boards/NUCLEO_F767ZI/mpconfigboard.mk +++ b/ports/stm32/boards/NUCLEO_F767ZI/mpconfigboard.mk @@ -2,4 +2,6 @@ MCU_SERIES = f7 CMSIS_MCU = STM32F767xx MICROPY_FLOAT_IMPL = double AF_FILE = boards/stm32f767_af.csv -LD_FILE = boards/stm32f767.ld +LD_FILES = boards/stm32f767.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08020000 diff --git a/ports/stm32/boards/NUCLEO_F767ZI/pins.csv b/ports/stm32/boards/NUCLEO_F767ZI/pins.csv index 897b1473e..3cae615da 100644 --- a/ports/stm32/boards/NUCLEO_F767ZI/pins.csv +++ b/ports/stm32/boards/NUCLEO_F767ZI/pins.csv @@ -4,6 +4,9 @@ A2,PC3 A3,PF3 A4,PF5 A5,PF10 +A6,PB1 +A7,PC2 +A8,PF4 D0,PG9 D1,PG14 D2,PF15 @@ -51,10 +54,11 @@ LCD_SCL,PH7 OTG_FS_POWER,PD5 OTG_FS_OVER_CURRENT,PD4 OTG_HS_OVER_CURRENT,PE3 -USB_VBUS,PJ12 +USB_VBUS,PA9 USB_ID,PA10 USB_DM,PA11 USB_DP,PA12 +USB_POWER,PG6 VCP_TX,PD8 VCP_RX,PD9 UART2_TX,PD5 diff --git a/ports/stm32/boards/NUCLEO_F767ZI/stm32f7xx_hal_conf.h b/ports/stm32/boards/NUCLEO_F767ZI/stm32f7xx_hal_conf.h index e1aa4578d..a019ee4ce 100644 --- a/ports/stm32/boards/NUCLEO_F767ZI/stm32f7xx_hal_conf.h +++ b/ports/stm32/boards/NUCLEO_F767ZI/stm32f7xx_hal_conf.h @@ -46,8 +46,6 @@ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ -#define USE_USB_FS - /* ########################## Module Selection ############################## */ /** * @brief This is the list of modules to be used in the HAL driver diff --git a/ports/stm32/boards/NUCLEO_H743ZI/board_init.c b/ports/stm32/boards/NUCLEO_H743ZI/board_init.c new file mode 100644 index 000000000..04149c37b --- /dev/null +++ b/ports/stm32/boards/NUCLEO_H743ZI/board_init.c @@ -0,0 +1,8 @@ +#include "py/mphal.h" + +void NUCLEO_H743ZI_board_early_init(void) { + // Turn off the USB switch + #define USB_PowerSwitchOn pin_G6 + mp_hal_pin_output(USB_PowerSwitchOn); + mp_hal_pin_low(USB_PowerSwitchOn); +} diff --git a/ports/stm32/boards/NUCLEO_H743ZI/mpconfigboard.h b/ports/stm32/boards/NUCLEO_H743ZI/mpconfigboard.h new file mode 100644 index 000000000..117e7f3f6 --- /dev/null +++ b/ports/stm32/boards/NUCLEO_H743ZI/mpconfigboard.h @@ -0,0 +1,65 @@ +#define MICROPY_HW_BOARD_NAME "NUCLEO_H743ZI" +#define MICROPY_HW_MCU_NAME "STM32H743" + +#define MICROPY_HW_ENABLE_RTC (1) +#define MICROPY_HW_ENABLE_RNG (1) +#define MICROPY_HW_ENABLE_ADC (1) +#define MICROPY_HW_ENABLE_DAC (1) +#define MICROPY_HW_ENABLE_USB (1) +#define MICROPY_HW_HAS_SWITCH (1) +#define MICROPY_HW_HAS_FLASH (1) +#define MICROPY_HW_HAS_SDCARD (1) + +#define MICROPY_BOARD_EARLY_INIT NUCLEO_H743ZI_board_early_init +void NUCLEO_H743ZI_board_early_init(void); + +// The board has an 8MHz HSE, the following gives 400MHz CPU speed +#define MICROPY_HW_CLK_PLLM (4) +#define MICROPY_HW_CLK_PLLN (400) +#define MICROPY_HW_CLK_PLLP (2) +#define MICROPY_HW_CLK_PLLQ (4) +#define MICROPY_HW_CLK_PLLR (2) + +// 4 wait states +#define MICROPY_HW_FLASH_LATENCY FLASH_LATENCY_4 + +// UART config +#define MICROPY_HW_UART3_TX (pin_D8) +#define MICROPY_HW_UART3_RX (pin_D9) +#define MICROPY_HW_UART_REPL PYB_UART_3 +#define MICROPY_HW_UART_REPL_BAUD 115200 + +// I2C busses +#define MICROPY_HW_I2C1_SCL (pin_B8) +#define MICROPY_HW_I2C1_SDA (pin_B9) +#define MICROPY_HW_I2C2_SCL (pin_F1) +#define MICROPY_HW_I2C2_SDA (pin_F0) + +// SPI +//#define MICROPY_HW_SPI2_NSS (pin_I0) +//#define MICROPY_HW_SPI2_SCK (pin_I1) +//#define MICROPY_HW_SPI2_MISO (pin_B14) +//#define MICROPY_HW_SPI2_MOSI (pin_B15) + +// USRSW is pulled low. Pressing the button makes the input go high. +#define MICROPY_HW_USRSW_PIN (pin_C13) +#define MICROPY_HW_USRSW_PULL (GPIO_NOPULL) +#define MICROPY_HW_USRSW_EXTI_MODE (GPIO_MODE_IT_RISING) +#define MICROPY_HW_USRSW_PRESSED (1) + +// LEDs +#define MICROPY_HW_LED1 (pin_B0) // green +#define MICROPY_HW_LED2 (pin_B7) // blue +#define MICROPY_HW_LED3 (pin_B14) // red +#define MICROPY_HW_LED_ON(pin) (mp_hal_pin_high(pin)) +#define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin)) + +// USB config +#define MICROPY_HW_USB_FS (1) +#define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_A9) +#define MICROPY_HW_USB_OTG_ID_PIN (pin_A10) + +// SD card detect switch +#define MICROPY_HW_SDCARD_DETECT_PIN (pin_G2) +#define MICROPY_HW_SDCARD_DETECT_PULL (GPIO_PULLUP) +#define MICROPY_HW_SDCARD_DETECT_PRESENT (GPIO_PIN_RESET) diff --git a/ports/stm32/boards/NUCLEO_H743ZI/mpconfigboard.mk b/ports/stm32/boards/NUCLEO_H743ZI/mpconfigboard.mk new file mode 100644 index 000000000..4d3455441 --- /dev/null +++ b/ports/stm32/boards/NUCLEO_H743ZI/mpconfigboard.mk @@ -0,0 +1,7 @@ +MCU_SERIES = h7 +CMSIS_MCU = STM32H743xx +MICROPY_FLOAT_IMPL = double +AF_FILE = boards/stm32h743_af.csv +LD_FILES = boards/stm32h743.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08040000 diff --git a/ports/stm32/boards/NUCLEO_H743ZI/pins.csv b/ports/stm32/boards/NUCLEO_H743ZI/pins.csv new file mode 100644 index 000000000..30910c4dd --- /dev/null +++ b/ports/stm32/boards/NUCLEO_H743ZI/pins.csv @@ -0,0 +1,63 @@ +A0,PA0 +A1,PF10 +A2,PF9 +A3,PF8 +A4,PF7 +A5,PF6 +D0,PC7 +D1,PC6 +D2,PG6 +D3,PB4 +D4,PG7 +D5,PA8 +D6,PH6 +D7,PI3 +D8,PI2 +D9,PA15 +D10,PI0 +D11,PB15 +D12,PB14 +D13,PI1 +D14,PB9 +D15,PB8 +DAC1,PA4 +DAC2,PA5 +LED1,PB0 +LED2,PB7 +LED3,PB14 +SW,PC13 +TP1,PH2 +TP2,PI8 +TP3,PH15 +AUDIO_INT,PD6 +AUDIO_SDA,PH8 +AUDIO_SCL,PH7 +I2C1_SDA,PB9 +I2C1_SCL,PB8 +I2C2_SDA,PF0 +I2C2_SCL,PF1 +EXT_RST,PG3 +SD_D0,PC8 +SD_D1,PC9 +SD_D2,PC10 +SD_D3,PC11 +SD_CMD,PD2 +SD_CK,PC12 +SD_SW,PG2 +LCD_BL_CTRL,PK3 +LCD_INT,PI13 +LCD_SDA,PH8 +LCD_SCL,PH7 +OTG_FS_POWER,PD5 +OTG_FS_OVER_CURRENT,PD4 +OTG_HS_OVER_CURRENT,PE3 +USB_VBUS,PJ12 +USB_ID,PA8 +USB_DM,PA11 +USB_DP,PA12 +UART1_TX,PA9 +UART1_RX,PA10 +UART5_TX,PC12 +UART5_RX,PD2 +UART3_TX,PD8 +UART3_RX,PD9 diff --git a/ports/stm32/boards/NUCLEO_H743ZI/stm32h7xx_hal_conf.h b/ports/stm32/boards/NUCLEO_H743ZI/stm32h7xx_hal_conf.h new file mode 100644 index 000000000..97b141d49 --- /dev/null +++ b/ports/stm32/boards/NUCLEO_H743ZI/stm32h7xx_hal_conf.h @@ -0,0 +1,434 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_conf_template.h + * @author MCD Application Team + * @version V1.2.0 + * @date 29-December-2017 + * @brief HAL configuration template file. + * This file should be copied to the application folder and renamed + * to stm32h7xx_hal_conf.h. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32H7xx_HAL_CONF_H +#define __STM32H7xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +#define HAL_CEC_MODULE_ENABLED +#define HAL_COMP_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CRC_MODULE_ENABLED +#define HAL_CRYP_MODULE_ENABLED +#define HAL_DAC_MODULE_ENABLED +#define HAL_DCMI_MODULE_ENABLED +#define HAL_DFSDM_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_DMA2D_MODULE_ENABLED +#define HAL_ETH_MODULE_ENABLED +#define HAL_FDCAN_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_HASH_MODULE_ENABLED +#define HAL_HCD_MODULE_ENABLED +#define HAL_HRTIM_MODULE_ENABLED +#define HAL_HSEM_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#define HAL_I2S_MODULE_ENABLED +#define HAL_IRDA_MODULE_ENABLED +#define HAL_IWDG_MODULE_ENABLED +#define HAL_JPEG_MODULE_ENABLED +#define HAL_LPTIM_MODULE_ENABLED +#define HAL_LTDC_MODULE_ENABLED +#define HAL_MDIOS_MODULE_ENABLED +#define HAL_MDMA_MODULE_ENABLED +#define HAL_MMC_MODULE_ENABLED +#define HAL_NAND_MODULE_ENABLED +#define HAL_NOR_MODULE_ENABLED +#define HAL_OPAMP_MODULE_ENABLED +#define HAL_PCD_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_QSPI_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_RNG_MODULE_ENABLED +#define HAL_RTC_MODULE_ENABLED +#define HAL_SAI_MODULE_ENABLED +#define HAL_SD_MODULE_ENABLED +#define HAL_SDRAM_MODULE_ENABLED +#define HAL_SMARTCARD_MODULE_ENABLED +#define HAL_SMBUS_MODULE_ENABLED +#define HAL_SPDIFRX_MODULE_ENABLED +#define HAL_SPI_MODULE_ENABLED +#define HAL_SRAM_MODULE_ENABLED +#define HAL_SWPMI_MODULE_ENABLED +#define HAL_TIM_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +#define HAL_USART_MODULE_ENABLED +#define HAL_WWDG_MODULE_ENABLED + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal oscillator (CSI) default value. + * This value is the default CSI value after Reset. + */ +#if !defined (CSI_VALUE) + #define CSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* CSI_VALUE */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External clock in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0x00) /*!< tick interrupt priority */ +#define USE_RTOS 0 +#define USE_SD_TRANSCEIVER 0U /*!< use uSD Transceiver */ + +/* ########################### Ethernet Configuration ######################### */ +#define ETH_TX_DESC_CNT 4 /* number of Ethernet Tx DMA descriptors */ +#define ETH_RX_DESC_CNT 4 /* number of Ethernet Rx DMA descriptors */ + +#define ETH_MAC_ADDR0 ((uint8_t)0x02) +#define ETH_MAC_ADDR1 ((uint8_t)0x00) +#define ETH_MAC_ADDR2 ((uint8_t)0x00) +#define ETH_MAC_ADDR3 ((uint8_t)0x00) +#define ETH_MAC_ADDR4 ((uint8_t)0x00) +#define ETH_MAC_ADDR5 ((uint8_t)0x00) + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + +/* ################## SPI peripheral configuration ########################## */ +/** + * @brief Used to activate CRC feature inside HAL SPI Driver + * Activated (1U): CRC code is compiled within HAL SPI driver + * Deactivated (0U): CRC code excluded from HAL SPI driver + */ + +#define USE_SPI_CRC 1U + + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32h7xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32h7xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32h7xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32h7xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32h7xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32h7xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32h7xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32h7xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32h7xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32h7xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_FDCAN_MODULE_ENABLED + #include "stm32h7xx_hal_fdcan.h" +#endif /* HAL_FDCAN_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32h7xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32h7xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32h7xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32h7xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32h7xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32h7xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_HRTIM_MODULE_ENABLED + #include "stm32h7xx_hal_hrtim.h" +#endif /* HAL_HRTIM_MODULE_ENABLED */ + +#ifdef HAL_HSEM_MODULE_ENABLED + #include "stm32h7xx_hal_hsem.h" +#endif /* HAL_HSEM_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32h7xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32h7xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32h7xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32h7xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32h7xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32h7xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_JPEG_MODULE_ENABLED + #include "stm32h7xx_hal_jpeg.h" +#endif /* HAL_JPEG_MODULE_ENABLED */ + +#ifdef HAL_MDIOS_MODULE_ENABLED + #include "stm32h7xx_hal_mdios.h" +#endif /* HAL_MDIOS_MODULE_ENABLED */ + +#ifdef HAL_MDMA_MODULE_ENABLED + #include "stm32h7xx_hal_mdma.h" +#endif /* HAL_MDMA_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32h7xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED +#include "stm32h7xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED +#include "stm32h7xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_OPAMP_MODULE_ENABLED +#include "stm32h7xx_hal_opamp.h" +#endif /* HAL_OPAMP_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32h7xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32h7xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32h7xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32h7xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32h7xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32h7xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32h7xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32h7xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32h7xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_SWPMI_MODULE_ENABLED + #include "stm32h7xx_hal_swpmi.h" +#endif /* HAL_SWPMI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32h7xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32h7xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32h7xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32h7xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32h7xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32h7xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32h7xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32h7xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32h7xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32H7xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/ports/stm32/boards/NUCLEO_L476RG/mpconfigboard.h b/ports/stm32/boards/NUCLEO_L476RG/mpconfigboard.h index f2474619f..0d5dab394 100644 --- a/ports/stm32/boards/NUCLEO_L476RG/mpconfigboard.h +++ b/ports/stm32/boards/NUCLEO_L476RG/mpconfigboard.h @@ -3,9 +3,8 @@ #define MICROPY_HW_HAS_SWITCH (1) #define MICROPY_HW_HAS_FLASH (1) -#define MICROPY_HW_HAS_SDCARD (0) -#define MICROPY_HW_HAS_LCD (0) #define MICROPY_HW_ENABLE_RTC (1) +#define MICROPY_HW_ENABLE_USB (1) // MSI is used and is 4MHz #define MICROPY_HW_CLK_PLLM (1) @@ -51,3 +50,6 @@ #define MICROPY_HW_LED1 (pin_A5) // Green LD2 LED on Nucleo #define MICROPY_HW_LED_ON(pin) (mp_hal_pin_high(pin)) #define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin)) + +// USB config +#define MICROPY_HW_USB_FS (1) diff --git a/ports/stm32/boards/NUCLEO_L476RG/mpconfigboard.mk b/ports/stm32/boards/NUCLEO_L476RG/mpconfigboard.mk index abb4a3570..38ae5af21 100644 --- a/ports/stm32/boards/NUCLEO_L476RG/mpconfigboard.mk +++ b/ports/stm32/boards/NUCLEO_L476RG/mpconfigboard.mk @@ -1,5 +1,6 @@ MCU_SERIES = l4 CMSIS_MCU = STM32L476xx AF_FILE = boards/stm32l476_af.csv -LD_FILE = boards/stm32l476xg.ld -TEXT_ADDR = 0x08004000 +LD_FILES = boards/stm32l476xg.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08004000 diff --git a/ports/stm32/boards/NUCLEO_L476RG/stm32l4xx_hal_conf.h b/ports/stm32/boards/NUCLEO_L476RG/stm32l4xx_hal_conf.h index 9348e0679..6bfb28118 100755 --- a/ports/stm32/boards/NUCLEO_L476RG/stm32l4xx_hal_conf.h +++ b/ports/stm32/boards/NUCLEO_L476RG/stm32l4xx_hal_conf.h @@ -45,7 +45,6 @@ extern "C" { #endif -#define USE_USB_FS /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ diff --git a/ports/stm32/boards/OLIMEX_E407/mpconfigboard.h b/ports/stm32/boards/OLIMEX_E407/mpconfigboard.h index 5ede68264..a56f6f79d 100644 --- a/ports/stm32/boards/OLIMEX_E407/mpconfigboard.h +++ b/ports/stm32/boards/OLIMEX_E407/mpconfigboard.h @@ -1,20 +1,13 @@ -#define STM32E407 - #define MICROPY_HW_BOARD_NAME "OLIMEX STM32-E407" #define MICROPY_HW_MCU_NAME "STM32F407" #define MICROPY_HW_HAS_SWITCH (1) #define MICROPY_HW_HAS_FLASH (1) #define MICROPY_HW_HAS_SDCARD (1) -#define MICROPY_HW_HAS_MMA7660 (0) -#define MICROPY_HW_HAS_LIS3DSH (0) -#define MICROPY_HW_HAS_LCD (0) #define MICROPY_HW_ENABLE_RNG (1) #define MICROPY_HW_ENABLE_RTC (1) -#define MICROPY_HW_ENABLE_TIMER (1) -#define MICROPY_HW_ENABLE_SERVO (0) #define MICROPY_HW_ENABLE_DAC (1) -#define MICROPY_HW_ENABLE_CAN (1) +#define MICROPY_HW_ENABLE_USB (1) // HSE is 12MHz #define MICROPY_HW_CLK_PLLM (12) @@ -59,6 +52,12 @@ #define MICROPY_HW_SPI2_MISO (pin_B14) #define MICROPY_HW_SPI2_MOSI (pin_B15) +// CAN busses +#define MICROPY_HW_CAN1_TX (pin_B9) +#define MICROPY_HW_CAN1_RX (pin_B8) +#define MICROPY_HW_CAN2_TX (pin_B13) +#define MICROPY_HW_CAN2_RX (pin_B12) + // USRSW is pulled low. Pressing the button makes the input go high. #define MICROPY_HW_USRSW_PIN (pin_A0) #define MICROPY_HW_USRSW_PULL (GPIO_NOPULL) @@ -76,5 +75,6 @@ #define MICROPY_HW_SDCARD_DETECT_PRESENT (GPIO_PIN_RESET) // USB config +#define MICROPY_HW_USB_FS (1) #define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_A9) #define MICROPY_HW_USB_OTG_ID_PIN (pin_A10) diff --git a/ports/stm32/boards/OLIMEX_E407/mpconfigboard.mk b/ports/stm32/boards/OLIMEX_E407/mpconfigboard.mk index ece09caa1..b154dcfba 100644 --- a/ports/stm32/boards/OLIMEX_E407/mpconfigboard.mk +++ b/ports/stm32/boards/OLIMEX_E407/mpconfigboard.mk @@ -1,4 +1,6 @@ MCU_SERIES = f4 CMSIS_MCU = STM32F407xx AF_FILE = boards/stm32f405_af.csv -LD_FILE = boards/stm32f405.ld +LD_FILES = boards/stm32f405.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08020000 diff --git a/ports/stm32/boards/OLIMEX_E407/pins.csv b/ports/stm32/boards/OLIMEX_E407/pins.csv index 6b91f74ae..81a9bcb85 100644 --- a/ports/stm32/boards/OLIMEX_E407/pins.csv +++ b/ports/stm32/boards/OLIMEX_E407/pins.csv @@ -82,4 +82,5 @@ PD13,PD13 PD14,PD14 PD15,PD15 PA0,PA0 - +USB_DM,PA11 +USB_DP,PA12 diff --git a/ports/stm32/boards/OLIMEX_E407/stm32f4xx_hal_conf.h b/ports/stm32/boards/OLIMEX_E407/stm32f4xx_hal_conf.h index b84b0a892..24cc9228b 100644 --- a/ports/stm32/boards/OLIMEX_E407/stm32f4xx_hal_conf.h +++ b/ports/stm32/boards/OLIMEX_E407/stm32f4xx_hal_conf.h @@ -46,8 +46,6 @@ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ -#define USE_USB_FS - /* ########################## Module Selection ############################## */ /** * @brief This is the list of modules to be used in the HAL driver diff --git a/ports/stm32/boards/PYBLITEV10/mpconfigboard.h b/ports/stm32/boards/PYBLITEV10/mpconfigboard.h index 090ba4cf1..60a6980aa 100644 --- a/ports/stm32/boards/PYBLITEV10/mpconfigboard.h +++ b/ports/stm32/boards/PYBLITEV10/mpconfigboard.h @@ -5,14 +5,10 @@ #define MICROPY_HW_HAS_FLASH (1) #define MICROPY_HW_HAS_SDCARD (1) #define MICROPY_HW_HAS_MMA7660 (1) -#define MICROPY_HW_HAS_LIS3DSH (0) #define MICROPY_HW_HAS_LCD (1) -#define MICROPY_HW_ENABLE_RNG (0) #define MICROPY_HW_ENABLE_RTC (1) -#define MICROPY_HW_ENABLE_TIMER (1) +#define MICROPY_HW_ENABLE_USB (1) #define MICROPY_HW_ENABLE_SERVO (1) -#define MICROPY_HW_ENABLE_DAC (0) -#define MICROPY_HW_ENABLE_CAN (0) // HSE is 12MHz #define MICROPY_HW_CLK_PLLM (12) @@ -81,6 +77,7 @@ #define MICROPY_HW_SDCARD_DETECT_PRESENT (GPIO_PIN_RESET) // USB config +#define MICROPY_HW_USB_FS (1) #define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_A9) // MMA accelerometer config diff --git a/ports/stm32/boards/PYBLITEV10/mpconfigboard.mk b/ports/stm32/boards/PYBLITEV10/mpconfigboard.mk index 71b3b19d6..df9506522 100644 --- a/ports/stm32/boards/PYBLITEV10/mpconfigboard.mk +++ b/ports/stm32/boards/PYBLITEV10/mpconfigboard.mk @@ -1,4 +1,6 @@ MCU_SERIES = f4 CMSIS_MCU = STM32F411xE AF_FILE = boards/stm32f411_af.csv -LD_FILE = boards/stm32f411.ld +LD_FILES = boards/stm32f411.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08020000 diff --git a/ports/stm32/boards/PYBLITEV10/stm32f4xx_hal_conf.h b/ports/stm32/boards/PYBLITEV10/stm32f4xx_hal_conf.h index 4ee8e7276..4e96f785a 100644 --- a/ports/stm32/boards/PYBLITEV10/stm32f4xx_hal_conf.h +++ b/ports/stm32/boards/PYBLITEV10/stm32f4xx_hal_conf.h @@ -46,8 +46,6 @@ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ -#define USE_USB_FS - /* ########################## Module Selection ############################## */ /** * @brief This is the list of modules to be used in the HAL driver diff --git a/ports/stm32/boards/PYBV10/mpconfigboard.h b/ports/stm32/boards/PYBV10/mpconfigboard.h index c06022a34..3439f5a0f 100644 --- a/ports/stm32/boards/PYBV10/mpconfigboard.h +++ b/ports/stm32/boards/PYBV10/mpconfigboard.h @@ -5,14 +5,12 @@ #define MICROPY_HW_HAS_FLASH (1) #define MICROPY_HW_HAS_SDCARD (1) #define MICROPY_HW_HAS_MMA7660 (1) -#define MICROPY_HW_HAS_LIS3DSH (0) #define MICROPY_HW_HAS_LCD (1) #define MICROPY_HW_ENABLE_RNG (1) #define MICROPY_HW_ENABLE_RTC (1) -#define MICROPY_HW_ENABLE_TIMER (1) #define MICROPY_HW_ENABLE_SERVO (1) #define MICROPY_HW_ENABLE_DAC (1) -#define MICROPY_HW_ENABLE_CAN (1) +#define MICROPY_HW_ENABLE_USB (1) // HSE is 8MHz #define MICROPY_HW_CLK_PLLM (8) @@ -67,8 +65,12 @@ #define MICROPY_HW_SPI2_MOSI (pin_B15) // Y8 // CAN busses -#define MICROPY_HW_CAN1_NAME "YA" // CAN1 on RX,TX = Y3,Y4 = PB8,PB9 -#define MICROPY_HW_CAN2_NAME "YB" // CAN2 on RX,TX = Y5,Y6 = PB12,PB13 +#define MICROPY_HW_CAN1_NAME "YA" +#define MICROPY_HW_CAN1_TX (pin_B9) // Y4 +#define MICROPY_HW_CAN1_RX (pin_B8) // Y3 +#define MICROPY_HW_CAN2_NAME "YB" +#define MICROPY_HW_CAN2_TX (pin_B13) // Y6 +#define MICROPY_HW_CAN2_RX (pin_B12) // Y5 // USRSW has no pullup or pulldown, and pressing the switch makes the input go low #define MICROPY_HW_USRSW_PIN (pin_B3) @@ -92,6 +94,7 @@ #define MICROPY_HW_SDCARD_DETECT_PRESENT (GPIO_PIN_RESET) // USB config +#define MICROPY_HW_USB_FS (1) #define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_A9) #define MICROPY_HW_USB_OTG_ID_PIN (pin_A10) diff --git a/ports/stm32/boards/PYBV10/mpconfigboard.mk b/ports/stm32/boards/PYBV10/mpconfigboard.mk index 5734c6690..40972b385 100644 --- a/ports/stm32/boards/PYBV10/mpconfigboard.mk +++ b/ports/stm32/boards/PYBV10/mpconfigboard.mk @@ -1,4 +1,6 @@ MCU_SERIES = f4 CMSIS_MCU = STM32F405xx AF_FILE = boards/stm32f405_af.csv -LD_FILE = boards/stm32f405.ld +LD_FILES = boards/stm32f405.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08020000 diff --git a/ports/stm32/boards/PYBV10/stm32f4xx_hal_conf.h b/ports/stm32/boards/PYBV10/stm32f4xx_hal_conf.h index 3d9252264..4f18ac81e 100644 --- a/ports/stm32/boards/PYBV10/stm32f4xx_hal_conf.h +++ b/ports/stm32/boards/PYBV10/stm32f4xx_hal_conf.h @@ -46,8 +46,6 @@ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ -#define USE_USB_FS - /* ########################## Module Selection ############################## */ /** * @brief This is the list of modules to be used in the HAL driver diff --git a/ports/stm32/boards/PYBV11/mpconfigboard.h b/ports/stm32/boards/PYBV11/mpconfigboard.h index c69e52cc5..2c75d0e64 100644 --- a/ports/stm32/boards/PYBV11/mpconfigboard.h +++ b/ports/stm32/boards/PYBV11/mpconfigboard.h @@ -5,14 +5,12 @@ #define MICROPY_HW_HAS_FLASH (1) #define MICROPY_HW_HAS_SDCARD (1) #define MICROPY_HW_HAS_MMA7660 (1) -#define MICROPY_HW_HAS_LIS3DSH (0) #define MICROPY_HW_HAS_LCD (1) #define MICROPY_HW_ENABLE_RNG (1) #define MICROPY_HW_ENABLE_RTC (1) -#define MICROPY_HW_ENABLE_TIMER (1) #define MICROPY_HW_ENABLE_SERVO (1) #define MICROPY_HW_ENABLE_DAC (1) -#define MICROPY_HW_ENABLE_CAN (1) +#define MICROPY_HW_ENABLE_USB (1) // HSE is 12MHz #define MICROPY_HW_CLK_PLLM (12) @@ -67,8 +65,12 @@ #define MICROPY_HW_SPI2_MOSI (pin_B15) // Y8 // CAN busses -#define MICROPY_HW_CAN1_NAME "YA" // CAN1 on RX,TX = Y3,Y4 = PB8,PB9 -#define MICROPY_HW_CAN2_NAME "YB" // CAN2 on RX,TX = Y5,Y6 = PB12,PB13 +#define MICROPY_HW_CAN1_NAME "YA" +#define MICROPY_HW_CAN1_TX (pin_B9) // Y4 +#define MICROPY_HW_CAN1_RX (pin_B8) // Y3 +#define MICROPY_HW_CAN2_NAME "YB" +#define MICROPY_HW_CAN2_TX (pin_B13) // Y6 +#define MICROPY_HW_CAN2_RX (pin_B12) // Y5 // USRSW has no pullup or pulldown, and pressing the switch makes the input go low #define MICROPY_HW_USRSW_PIN (pin_B3) @@ -92,6 +94,7 @@ #define MICROPY_HW_SDCARD_DETECT_PRESENT (GPIO_PIN_RESET) // USB config +#define MICROPY_HW_USB_FS (1) #define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_A9) #define MICROPY_HW_USB_OTG_ID_PIN (pin_A10) diff --git a/ports/stm32/boards/PYBV11/mpconfigboard.mk b/ports/stm32/boards/PYBV11/mpconfigboard.mk index 5734c6690..40972b385 100644 --- a/ports/stm32/boards/PYBV11/mpconfigboard.mk +++ b/ports/stm32/boards/PYBV11/mpconfigboard.mk @@ -1,4 +1,6 @@ MCU_SERIES = f4 CMSIS_MCU = STM32F405xx AF_FILE = boards/stm32f405_af.csv -LD_FILE = boards/stm32f405.ld +LD_FILES = boards/stm32f405.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08020000 diff --git a/ports/stm32/boards/PYBV11/stm32f4xx_hal_conf.h b/ports/stm32/boards/PYBV11/stm32f4xx_hal_conf.h index b84b0a892..24cc9228b 100644 --- a/ports/stm32/boards/PYBV11/stm32f4xx_hal_conf.h +++ b/ports/stm32/boards/PYBV11/stm32f4xx_hal_conf.h @@ -46,8 +46,6 @@ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ -#define USE_USB_FS - /* ########################## Module Selection ############################## */ /** * @brief This is the list of modules to be used in the HAL driver diff --git a/ports/stm32/boards/PYBV3/mpconfigboard.h b/ports/stm32/boards/PYBV3/mpconfigboard.h index 1f49af4da..3e457c5e2 100644 --- a/ports/stm32/boards/PYBV3/mpconfigboard.h +++ b/ports/stm32/boards/PYBV3/mpconfigboard.h @@ -5,14 +5,11 @@ #define MICROPY_HW_HAS_FLASH (1) #define MICROPY_HW_HAS_SDCARD (1) #define MICROPY_HW_HAS_MMA7660 (1) -#define MICROPY_HW_HAS_LIS3DSH (0) -#define MICROPY_HW_HAS_LCD (0) #define MICROPY_HW_ENABLE_RNG (1) #define MICROPY_HW_ENABLE_RTC (1) -#define MICROPY_HW_ENABLE_TIMER (1) #define MICROPY_HW_ENABLE_SERVO (1) #define MICROPY_HW_ENABLE_DAC (1) -#define MICROPY_HW_ENABLE_CAN (1) +#define MICROPY_HW_ENABLE_USB (1) // HSE is 8MHz #define MICROPY_HW_CLK_PLLM (8) @@ -59,6 +56,12 @@ #define MICROPY_HW_SPI2_MISO (pin_B14) // Y7 #define MICROPY_HW_SPI2_MOSI (pin_B15) // Y8 +// CAN busses +#define MICROPY_HW_CAN1_TX (pin_B9) // Y4 +#define MICROPY_HW_CAN1_RX (pin_B8) // Y3 +#define MICROPY_HW_CAN2_TX (pin_B13) // Y6 +#define MICROPY_HW_CAN2_RX (pin_B12) // Y5 + // USRSW has no pullup or pulldown, and pressing the switch makes the input go low #define MICROPY_HW_USRSW_PIN (pin_A13) #define MICROPY_HW_USRSW_PULL (GPIO_PULLUP) @@ -82,6 +85,7 @@ #define MICROPY_HW_SDCARD_DETECT_PRESENT (GPIO_PIN_SET) // USB VBUS detect pin +#define MICROPY_HW_USB_FS (1) #define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_A9) // MMA accelerometer config diff --git a/ports/stm32/boards/PYBV3/mpconfigboard.mk b/ports/stm32/boards/PYBV3/mpconfigboard.mk index 5734c6690..40972b385 100644 --- a/ports/stm32/boards/PYBV3/mpconfigboard.mk +++ b/ports/stm32/boards/PYBV3/mpconfigboard.mk @@ -1,4 +1,6 @@ MCU_SERIES = f4 CMSIS_MCU = STM32F405xx AF_FILE = boards/stm32f405_af.csv -LD_FILE = boards/stm32f405.ld +LD_FILES = boards/stm32f405.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08020000 diff --git a/ports/stm32/boards/PYBV3/pins.csv b/ports/stm32/boards/PYBV3/pins.csv index b20bd4ffb..1ddc3f52d 100644 --- a/ports/stm32/boards/PYBV3/pins.csv +++ b/ports/stm32/boards/PYBV3/pins.csv @@ -44,3 +44,5 @@ SD_D3,PC11 SD_CK,PC12 SD_CMD,PD2 UART1_TX,PA9 +USB_DM,PA11 +USB_DP,PA12 diff --git a/ports/stm32/boards/PYBV3/stm32f4xx_hal_conf.h b/ports/stm32/boards/PYBV3/stm32f4xx_hal_conf.h index d3df51c10..daf9b63ce 100644 --- a/ports/stm32/boards/PYBV3/stm32f4xx_hal_conf.h +++ b/ports/stm32/boards/PYBV3/stm32f4xx_hal_conf.h @@ -46,8 +46,6 @@ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ -#define USE_USB_FS - /* ########################## Module Selection ############################## */ /** * @brief This is the list of modules to be used in the HAL driver diff --git a/ports/stm32/boards/PYBV4/mpconfigboard.h b/ports/stm32/boards/PYBV4/mpconfigboard.h index 2a4829c3e..8c05644f6 100644 --- a/ports/stm32/boards/PYBV4/mpconfigboard.h +++ b/ports/stm32/boards/PYBV4/mpconfigboard.h @@ -5,14 +5,12 @@ #define MICROPY_HW_HAS_FLASH (1) #define MICROPY_HW_HAS_SDCARD (1) #define MICROPY_HW_HAS_MMA7660 (1) -#define MICROPY_HW_HAS_LIS3DSH (0) #define MICROPY_HW_HAS_LCD (1) #define MICROPY_HW_ENABLE_RNG (1) #define MICROPY_HW_ENABLE_RTC (1) -#define MICROPY_HW_ENABLE_TIMER (1) #define MICROPY_HW_ENABLE_SERVO (1) #define MICROPY_HW_ENABLE_DAC (1) -#define MICROPY_HW_ENABLE_CAN (1) +#define MICROPY_HW_ENABLE_USB (1) // HSE is 8MHz #define MICROPY_HW_CLK_PLLM (8) @@ -64,8 +62,12 @@ #define MICROPY_HW_SPI2_MOSI (pin_B15) // Y8 // CAN busses -#define MICROPY_HW_CAN1_NAME "YA" // CAN1 on RX,TX = Y3,Y4 = PB8,PB9 -#define MICROPY_HW_CAN2_NAME "YB" // CAN2 on RX,TX = Y5,Y6 = PB12,PB13 +#define MICROPY_HW_CAN1_NAME "YA" +#define MICROPY_HW_CAN1_TX (pin_B9) // Y4 +#define MICROPY_HW_CAN1_RX (pin_B8) // Y3 +#define MICROPY_HW_CAN2_NAME "YB" +#define MICROPY_HW_CAN2_TX (pin_B13) // Y6 +#define MICROPY_HW_CAN2_RX (pin_B12) // Y5 // USRSW has no pullup or pulldown, and pressing the switch makes the input go low #define MICROPY_HW_USRSW_PIN (pin_B3) @@ -89,6 +91,7 @@ #define MICROPY_HW_SDCARD_DETECT_PRESENT (GPIO_PIN_RESET) // USB config +#define MICROPY_HW_USB_FS (1) #define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_A9) #define MICROPY_HW_USB_OTG_ID_PIN (pin_A10) diff --git a/ports/stm32/boards/PYBV4/mpconfigboard.mk b/ports/stm32/boards/PYBV4/mpconfigboard.mk index 5734c6690..40972b385 100644 --- a/ports/stm32/boards/PYBV4/mpconfigboard.mk +++ b/ports/stm32/boards/PYBV4/mpconfigboard.mk @@ -1,4 +1,6 @@ MCU_SERIES = f4 CMSIS_MCU = STM32F405xx AF_FILE = boards/stm32f405_af.csv -LD_FILE = boards/stm32f405.ld +LD_FILES = boards/stm32f405.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08020000 diff --git a/ports/stm32/boards/PYBV4/stm32f4xx_hal_conf.h b/ports/stm32/boards/PYBV4/stm32f4xx_hal_conf.h index d3df51c10..daf9b63ce 100644 --- a/ports/stm32/boards/PYBV4/stm32f4xx_hal_conf.h +++ b/ports/stm32/boards/PYBV4/stm32f4xx_hal_conf.h @@ -46,8 +46,6 @@ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ -#define USE_USB_FS - /* ########################## Module Selection ############################## */ /** * @brief This is the list of modules to be used in the HAL driver diff --git a/ports/stm32/boards/STM32F411DISC/mpconfigboard.h b/ports/stm32/boards/STM32F411DISC/mpconfigboard.h index 1488cd764..13172333b 100644 --- a/ports/stm32/boards/STM32F411DISC/mpconfigboard.h +++ b/ports/stm32/boards/STM32F411DISC/mpconfigboard.h @@ -3,16 +3,9 @@ #define MICROPY_HW_HAS_SWITCH (1) #define MICROPY_HW_HAS_FLASH (1) -#define MICROPY_HW_HAS_SDCARD (0) -#define MICROPY_HW_HAS_MMA7660 (0) -#define MICROPY_HW_HAS_LIS3DSH (0) -#define MICROPY_HW_HAS_LCD (0) -#define MICROPY_HW_ENABLE_RNG (0) #define MICROPY_HW_ENABLE_RTC (1) -#define MICROPY_HW_ENABLE_TIMER (1) +#define MICROPY_HW_ENABLE_USB (1) #define MICROPY_HW_ENABLE_SERVO (1) -#define MICROPY_HW_ENABLE_DAC (0) -#define MICROPY_HW_ENABLE_CAN (0) // HSE is 8MHz #define MICROPY_HW_CLK_PLLM (5) @@ -66,5 +59,6 @@ #define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin)) // USB config +#define MICROPY_HW_USB_FS (1) #define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_A9) #define MICROPY_HW_USB_OTG_ID_PIN (pin_A10) diff --git a/ports/stm32/boards/STM32F411DISC/mpconfigboard.mk b/ports/stm32/boards/STM32F411DISC/mpconfigboard.mk index 71b3b19d6..df9506522 100644 --- a/ports/stm32/boards/STM32F411DISC/mpconfigboard.mk +++ b/ports/stm32/boards/STM32F411DISC/mpconfigboard.mk @@ -1,4 +1,6 @@ MCU_SERIES = f4 CMSIS_MCU = STM32F411xE AF_FILE = boards/stm32f411_af.csv -LD_FILE = boards/stm32f411.ld +LD_FILES = boards/stm32f411.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08020000 diff --git a/ports/stm32/boards/STM32F411DISC/pins.csv b/ports/stm32/boards/STM32F411DISC/pins.csv index 96077d54d..a747aef3e 100644 --- a/ports/stm32/boards/STM32F411DISC/pins.csv +++ b/ports/stm32/boards/STM32F411DISC/pins.csv @@ -82,3 +82,5 @@ LED_ORANGE,PD13 LED_RED,PD14 LED_BLUE,PD15 SW,PA0 +USB_DM,PA11 +USB_DP,PA12 diff --git a/ports/stm32/boards/STM32F411DISC/stm32f4xx_hal_conf.h b/ports/stm32/boards/STM32F411DISC/stm32f4xx_hal_conf.h index 921cbe5fe..8f0b66381 100644 --- a/ports/stm32/boards/STM32F411DISC/stm32f4xx_hal_conf.h +++ b/ports/stm32/boards/STM32F411DISC/stm32f4xx_hal_conf.h @@ -46,8 +46,6 @@ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ -#define USE_USB_FS - /* ########################## Module Selection ############################## */ /** * @brief This is the list of modules to be used in the HAL driver diff --git a/ports/stm32/boards/STM32F429DISC/mpconfigboard.h b/ports/stm32/boards/STM32F429DISC/mpconfigboard.h index fc0702025..be25d2e77 100644 --- a/ports/stm32/boards/STM32F429DISC/mpconfigboard.h +++ b/ports/stm32/boards/STM32F429DISC/mpconfigboard.h @@ -3,16 +3,9 @@ #define MICROPY_HW_HAS_SWITCH (1) #define MICROPY_HW_HAS_FLASH (1) -#define MICROPY_HW_HAS_SDCARD (0) -#define MICROPY_HW_HAS_MMA7660 (0) -#define MICROPY_HW_HAS_LIS3DSH (0) -#define MICROPY_HW_HAS_LCD (0) #define MICROPY_HW_ENABLE_RNG (1) #define MICROPY_HW_ENABLE_RTC (1) -#define MICROPY_HW_ENABLE_TIMER (1) -#define MICROPY_HW_ENABLE_SERVO (0) -#define MICROPY_HW_ENABLE_DAC (0) -#define MICROPY_HW_ENABLE_CAN (1) +#define MICROPY_HW_ENABLE_USB (1) // HSE is 8MHz #define MICROPY_HW_CLK_PLLM (8) @@ -56,6 +49,12 @@ //#define MICROPY_HW_SPI6_MISO (pin_G12) //#define MICROPY_HW_SPI6_MOSI (pin_G14) +// CAN busses +#define MICROPY_HW_CAN1_TX (pin_B9) +#define MICROPY_HW_CAN1_RX (pin_B8) +#define MICROPY_HW_CAN2_TX (pin_B13) +#define MICROPY_HW_CAN2_RX (pin_B12) + // USRSW is pulled low. Pressing the button makes the input go high. #define MICROPY_HW_USRSW_PIN (pin_A0) #define MICROPY_HW_USRSW_PULL (GPIO_NOPULL) @@ -69,5 +68,7 @@ #define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin)) // USB config +#define MICROPY_HW_USB_HS (1) +#define MICROPY_HW_USB_HS_IN_FS (1) #define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_B13) #define MICROPY_HW_USB_OTG_ID_PIN (pin_B12) diff --git a/ports/stm32/boards/STM32F429DISC/mpconfigboard.mk b/ports/stm32/boards/STM32F429DISC/mpconfigboard.mk index 1bbf808b6..d19a35c31 100644 --- a/ports/stm32/boards/STM32F429DISC/mpconfigboard.mk +++ b/ports/stm32/boards/STM32F429DISC/mpconfigboard.mk @@ -1,4 +1,6 @@ MCU_SERIES = f4 CMSIS_MCU = STM32F429xx AF_FILE = boards/stm32f429_af.csv -LD_FILE = boards/stm32f429.ld +LD_FILES = boards/stm32f429.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08020000 diff --git a/ports/stm32/boards/STM32F429DISC/stm32f4xx_hal_conf.h b/ports/stm32/boards/STM32F429DISC/stm32f4xx_hal_conf.h index 4f5962dcb..5b5a8a3e4 100644 --- a/ports/stm32/boards/STM32F429DISC/stm32f4xx_hal_conf.h +++ b/ports/stm32/boards/STM32F429DISC/stm32f4xx_hal_conf.h @@ -46,9 +46,6 @@ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ -#define USE_USB_HS -#define USE_USB_HS_IN_FS - /* ########################## Module Selection ############################## */ /** * @brief This is the list of modules to be used in the HAL driver diff --git a/ports/stm32/boards/STM32F439/mpconfigboard.h b/ports/stm32/boards/STM32F439/mpconfigboard.h index eca79bf58..4ac5b3213 100644 --- a/ports/stm32/boards/STM32F439/mpconfigboard.h +++ b/ports/stm32/boards/STM32F439/mpconfigboard.h @@ -1,18 +1,12 @@ #define MICROPY_HW_BOARD_NAME "CustomPCB" #define MICROPY_HW_MCU_NAME "STM32F439" -#define MICROPY_HW_HAS_SWITCH (0) #define MICROPY_HW_HAS_FLASH (1) #define MICROPY_HW_HAS_SDCARD (1) //works with no SD card too -#define MICROPY_HW_HAS_MMA7660 (0) -#define MICROPY_HW_HAS_LIS3DSH (0) -#define MICROPY_HW_HAS_LCD (0) #define MICROPY_HW_ENABLE_RNG (1) #define MICROPY_HW_ENABLE_RTC (1) -#define MICROPY_HW_ENABLE_TIMER (1) -#define MICROPY_HW_ENABLE_SERVO (0) #define MICROPY_HW_ENABLE_DAC (1) -#define MICROPY_HW_ENABLE_CAN (1) +#define MICROPY_HW_ENABLE_USB (1) // SD card detect switch #if MICROPY_HW_HAS_SDCARD @@ -27,6 +21,9 @@ #define MICROPY_HW_CLK_PLLP (RCC_PLLP_DIV2) //divide PLL clock by this to get core clock #define MICROPY_HW_CLK_PLLQ (8) //divide core clock by this to get 48MHz +// USB config +#define MICROPY_HW_USB_FS (1) + // UART config #define MICROPY_HW_UART1_TX (pin_A9) #define MICROPY_HW_UART1_RX (pin_A10) @@ -52,7 +49,7 @@ #define MICROPY_HW_SPI1_SCK (pin_A5) #define MICROPY_HW_SPI1_MISO (pin_A6) #define MICROPY_HW_SPI1_MOSI (pin_A7) -#if defined(USE_USB_HS_IN_FS) +#if MICROPY_HW_USB_HS_IN_FS // The HS USB uses B14 & B15 for D- and D+ #else #define MICROPY_HW_SPI2_NSS (pin_B12) @@ -77,6 +74,12 @@ //#define MICROPY_HW_SPI6_MISO (pin_G12) //#define MICROPY_HW_SPI6_MOSI (pin_G14) +// CAN busses +#define MICROPY_HW_CAN1_TX (pin_B9) +#define MICROPY_HW_CAN1_RX (pin_B8) +#define MICROPY_HW_CAN2_TX (pin_B13) +#define MICROPY_HW_CAN2_RX (pin_B12) + // USRSW is pulled low. Pressing the button makes the input go high. #define MICROPY_HW_USRSW_PIN (pin_A0) #define MICROPY_HW_USRSW_PULL (GPIO_NOPULL) diff --git a/ports/stm32/boards/STM32F439/mpconfigboard.mk b/ports/stm32/boards/STM32F439/mpconfigboard.mk index 0c30c06a3..ca97acbf6 100644 --- a/ports/stm32/boards/STM32F439/mpconfigboard.mk +++ b/ports/stm32/boards/STM32F439/mpconfigboard.mk @@ -1,4 +1,6 @@ MCU_SERIES = f4 CMSIS_MCU = STM32F439xx AF_FILE = boards/stm32f439_af.csv -LD_FILE = boards/stm32f439.ld +LD_FILES = boards/stm32f439.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08020000 diff --git a/ports/stm32/boards/STM32F439/stm32f4xx_hal_conf.h b/ports/stm32/boards/STM32F439/stm32f4xx_hal_conf.h index d121b18c5..5b5a8a3e4 100644 --- a/ports/stm32/boards/STM32F439/stm32f4xx_hal_conf.h +++ b/ports/stm32/boards/STM32F439/stm32f4xx_hal_conf.h @@ -46,8 +46,6 @@ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ -#define USE_USB_FS - /* ########################## Module Selection ############################## */ /** * @brief This is the list of modules to be used in the HAL driver diff --git a/ports/stm32/boards/STM32F4DISC/mpconfigboard.h b/ports/stm32/boards/STM32F4DISC/mpconfigboard.h index 105875515..3e4c8261c 100644 --- a/ports/stm32/boards/STM32F4DISC/mpconfigboard.h +++ b/ports/stm32/boards/STM32F4DISC/mpconfigboard.h @@ -1,20 +1,12 @@ -#define STM32F4DISC - #define MICROPY_HW_BOARD_NAME "F4DISC" #define MICROPY_HW_MCU_NAME "STM32F407" #define MICROPY_HW_HAS_SWITCH (1) #define MICROPY_HW_HAS_FLASH (1) -#define MICROPY_HW_HAS_SDCARD (0) -#define MICROPY_HW_HAS_MMA7660 (0) -#define MICROPY_HW_HAS_LIS3DSH (1) -#define MICROPY_HW_HAS_LCD (0) #define MICROPY_HW_ENABLE_RNG (1) #define MICROPY_HW_ENABLE_RTC (1) -#define MICROPY_HW_ENABLE_TIMER (1) -#define MICROPY_HW_ENABLE_SERVO (0) #define MICROPY_HW_ENABLE_DAC (1) -#define MICROPY_HW_ENABLE_CAN (1) +#define MICROPY_HW_ENABLE_USB (1) // HSE is 8MHz #define MICROPY_HW_CLK_PLLM (8) @@ -67,6 +59,12 @@ #define MICROPY_HW_SPI2_MISO (pin_B14) #define MICROPY_HW_SPI2_MOSI (pin_B15) +// CAN busses +#define MICROPY_HW_CAN1_TX (pin_B9) +#define MICROPY_HW_CAN1_RX (pin_B8) +#define MICROPY_HW_CAN2_TX (pin_B13) +#define MICROPY_HW_CAN2_RX (pin_B12) + // USRSW is pulled low. Pressing the button makes the input go high. #define MICROPY_HW_USRSW_PIN (pin_A0) #define MICROPY_HW_USRSW_PULL (GPIO_NOPULL) @@ -82,5 +80,6 @@ #define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin)) // USB config +#define MICROPY_HW_USB_FS (1) #define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_A9) #define MICROPY_HW_USB_OTG_ID_PIN (pin_A10) diff --git a/ports/stm32/boards/STM32F4DISC/mpconfigboard.mk b/ports/stm32/boards/STM32F4DISC/mpconfigboard.mk index ece09caa1..b154dcfba 100644 --- a/ports/stm32/boards/STM32F4DISC/mpconfigboard.mk +++ b/ports/stm32/boards/STM32F4DISC/mpconfigboard.mk @@ -1,4 +1,6 @@ MCU_SERIES = f4 CMSIS_MCU = STM32F407xx AF_FILE = boards/stm32f405_af.csv -LD_FILE = boards/stm32f405.ld +LD_FILES = boards/stm32f405.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08020000 diff --git a/ports/stm32/boards/STM32F4DISC/pins.csv b/ports/stm32/boards/STM32F4DISC/pins.csv index 4049fef7d..a747aef3e 100644 --- a/ports/stm32/boards/STM32F4DISC/pins.csv +++ b/ports/stm32/boards/STM32F4DISC/pins.csv @@ -82,4 +82,5 @@ LED_ORANGE,PD13 LED_RED,PD14 LED_BLUE,PD15 SW,PA0 - +USB_DM,PA11 +USB_DP,PA12 diff --git a/ports/stm32/boards/STM32F4DISC/stm32f4xx_hal_conf.h b/ports/stm32/boards/STM32F4DISC/stm32f4xx_hal_conf.h index d3df51c10..daf9b63ce 100644 --- a/ports/stm32/boards/STM32F4DISC/stm32f4xx_hal_conf.h +++ b/ports/stm32/boards/STM32F4DISC/stm32f4xx_hal_conf.h @@ -46,8 +46,6 @@ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ -#define USE_USB_FS - /* ########################## Module Selection ############################## */ /** * @brief This is the list of modules to be used in the HAL driver diff --git a/ports/stm32/boards/STM32F769DISC/mpconfigboard.h b/ports/stm32/boards/STM32F769DISC/mpconfigboard.h index 50b9c1618..8b29e5773 100644 --- a/ports/stm32/boards/STM32F769DISC/mpconfigboard.h +++ b/ports/stm32/boards/STM32F769DISC/mpconfigboard.h @@ -8,15 +8,9 @@ #define MICROPY_HW_HAS_SWITCH (1) #define MICROPY_HW_HAS_FLASH (1) #define MICROPY_HW_HAS_SDCARD (1) -#define MICROPY_HW_HAS_MMA7660 (0) -#define MICROPY_HW_HAS_LIS3DSH (0) -#define MICROPY_HW_HAS_LCD (0) #define MICROPY_HW_ENABLE_RNG (1) #define MICROPY_HW_ENABLE_RTC (1) -#define MICROPY_HW_ENABLE_TIMER (1) -#define MICROPY_HW_ENABLE_SERVO (0) -#define MICROPY_HW_ENABLE_DAC (0) -#define MICROPY_HW_ENABLE_CAN (1) +#define MICROPY_HW_ENABLE_USB (1) // HSE is 25MHz // VCOClock = HSE * PLLN / PLLM = 25 MHz * 432 / 25 = 432 MHz @@ -49,6 +43,12 @@ #define MICROPY_HW_SPI2_MISO (pin_B14) #define MICROPY_HW_SPI2_MOSI (pin_B15) +// CAN busses +#define MICROPY_HW_CAN1_TX (pin_B9) +#define MICROPY_HW_CAN1_RX (pin_B8) +#define MICROPY_HW_CAN2_TX (pin_B13) +#define MICROPY_HW_CAN2_RX (pin_B12) + // USRSW is pulled low. Pressing the button makes the input go high. #define MICROPY_HW_USRSW_PIN (pin_A0) #define MICROPY_HW_USRSW_PULL (GPIO_NOPULL) @@ -74,5 +74,7 @@ #define MICROPY_HW_SDCARD_DETECT_PRESENT (GPIO_PIN_RESET) // USB config (CN13 - USB OTG FS) +#define MICROPY_HW_USB_HS (1) +#define MICROPY_HW_USB_HS_IN_FS (1) /*#define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_J12)*/ #define MICROPY_HW_USB_OTG_ID_PIN (pin_J12) diff --git a/ports/stm32/boards/STM32F769DISC/mpconfigboard.mk b/ports/stm32/boards/STM32F769DISC/mpconfigboard.mk index 99234e4cf..873368ce5 100644 --- a/ports/stm32/boards/STM32F769DISC/mpconfigboard.mk +++ b/ports/stm32/boards/STM32F769DISC/mpconfigboard.mk @@ -2,4 +2,6 @@ MCU_SERIES = f7 CMSIS_MCU = STM32F769xx MICROPY_FLOAT_IMPL = double AF_FILE = boards/stm32f767_af.csv -LD_FILE = boards/stm32f769.ld +LD_FILES = boards/stm32f769.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08020000 diff --git a/ports/stm32/boards/STM32F769DISC/pins.csv b/ports/stm32/boards/STM32F769DISC/pins.csv index dcc2df208..e68ed9536 100644 --- a/ports/stm32/boards/STM32F769DISC/pins.csv +++ b/ports/stm32/boards/STM32F769DISC/pins.csv @@ -55,3 +55,5 @@ UART1_TX,PA9 UART1_RX,PA10 UART5_TX,PC12 UART5_RX,PD2 +CAN2_TX,PB13 +CAN2_RX,PB12 diff --git a/ports/stm32/boards/STM32F769DISC/stm32f7xx_hal_conf.h b/ports/stm32/boards/STM32F769DISC/stm32f7xx_hal_conf.h index ce8254902..ff968bca9 100644 --- a/ports/stm32/boards/STM32F769DISC/stm32f7xx_hal_conf.h +++ b/ports/stm32/boards/STM32F769DISC/stm32f7xx_hal_conf.h @@ -46,9 +46,6 @@ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ -#define USE_USB_HS -#define USE_USB_HS_IN_FS - /* ########################## Module Selection ############################## */ /** * @brief This is the list of modules to be used in the HAL driver diff --git a/ports/stm32/boards/STM32F7DISC/board_init.c b/ports/stm32/boards/STM32F7DISC/board_init.c index 4530a4706..dd268fb9c 100644 --- a/ports/stm32/boards/STM32F7DISC/board_init.c +++ b/ports/stm32/boards/STM32F7DISC/board_init.c @@ -3,13 +3,13 @@ void STM32F7DISC_board_early_init(void) { GPIO_InitTypeDef GPIO_InitStructure; - __GPIOK_CLK_ENABLE(); + __HAL_RCC_GPIOK_CLK_ENABLE(); // Turn off the backlight. LCD_BL_CTRL = PK3 GPIO_InitStructure.Pin = GPIO_PIN_3; GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP; GPIO_InitStructure.Pull = GPIO_PULLUP; - GPIO_InitStructure.Speed = GPIO_SPEED_HIGH; + GPIO_InitStructure.Speed = GPIO_SPEED_FREQ_VERY_HIGH; HAL_GPIO_Init(GPIOK, &GPIO_InitStructure); HAL_GPIO_WritePin(GPIOK, GPIO_PIN_3, GPIO_PIN_RESET); } diff --git a/ports/stm32/boards/STM32F7DISC/mpconfigboard.h b/ports/stm32/boards/STM32F7DISC/mpconfigboard.h index 44a39c0a1..7b506a305 100644 --- a/ports/stm32/boards/STM32F7DISC/mpconfigboard.h +++ b/ports/stm32/boards/STM32F7DISC/mpconfigboard.h @@ -1,20 +1,12 @@ -#define STM32F7DISC - #define MICROPY_HW_BOARD_NAME "F7DISC" #define MICROPY_HW_MCU_NAME "STM32F746" #define MICROPY_HW_HAS_SWITCH (1) #define MICROPY_HW_HAS_FLASH (1) #define MICROPY_HW_HAS_SDCARD (1) -#define MICROPY_HW_HAS_MMA7660 (0) -#define MICROPY_HW_HAS_LIS3DSH (0) -#define MICROPY_HW_HAS_LCD (0) #define MICROPY_HW_ENABLE_RNG (1) #define MICROPY_HW_ENABLE_RTC (1) -#define MICROPY_HW_ENABLE_TIMER (1) -#define MICROPY_HW_ENABLE_SERVO (0) -#define MICROPY_HW_ENABLE_DAC (0) -#define MICROPY_HW_ENABLE_CAN (1) +#define MICROPY_HW_ENABLE_USB (1) #define MICROPY_BOARD_EARLY_INIT STM32F7DISC_board_early_init void STM32F7DISC_board_early_init(void); @@ -57,6 +49,12 @@ void STM32F7DISC_board_early_init(void); #define MICROPY_HW_SPI2_MISO (pin_B14) #define MICROPY_HW_SPI2_MOSI (pin_B15) +// CAN busses +#define MICROPY_HW_CAN1_TX (pin_B9) +#define MICROPY_HW_CAN1_RX (pin_B8) +#define MICROPY_HW_CAN2_TX (pin_B13) +#define MICROPY_HW_CAN2_RX (pin_B12) + // USRSW is pulled low. Pressing the button makes the input go high. #define MICROPY_HW_USRSW_PIN (pin_I11) #define MICROPY_HW_USRSW_PULL (GPIO_NOPULL) @@ -77,6 +75,6 @@ void STM32F7DISC_board_early_init(void); // The Hardware VBUS detect only works on pin PA9. The STM32F7 Discovery uses // PA9 for VCP_TX functionality and connects the VBUS to pin J12 (so software // only detect). So we don't define the VBUS detect pin since that requires PA9. - +#define MICROPY_HW_USB_FS (1) /*#define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_J12)*/ #define MICROPY_HW_USB_OTG_ID_PIN (pin_A10) diff --git a/ports/stm32/boards/STM32F7DISC/mpconfigboard.mk b/ports/stm32/boards/STM32F7DISC/mpconfigboard.mk index 7c6bc4584..160218fd3 100644 --- a/ports/stm32/boards/STM32F7DISC/mpconfigboard.mk +++ b/ports/stm32/boards/STM32F7DISC/mpconfigboard.mk @@ -1,4 +1,6 @@ MCU_SERIES = f7 CMSIS_MCU = STM32F746xx AF_FILE = boards/stm32f746_af.csv -LD_FILE = boards/stm32f746.ld +LD_FILES = boards/stm32f746.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08020000 diff --git a/ports/stm32/boards/STM32F7DISC/pins.csv b/ports/stm32/boards/STM32F7DISC/pins.csv index 1aa8a9b3a..8b49003f7 100644 --- a/ports/stm32/boards/STM32F7DISC/pins.csv +++ b/ports/stm32/boards/STM32F7DISC/pins.csv @@ -51,3 +51,5 @@ USB_DM,PA11 USB_DP,PA12 VCP_TX,PA9 VCP_RX,PB7 +CAN_TX,PB13 +CAN_RX,PB12 diff --git a/ports/stm32/boards/STM32F7DISC/stm32f7xx_hal_conf.h b/ports/stm32/boards/STM32F7DISC/stm32f7xx_hal_conf.h index 3fbfb4310..ff968bca9 100644 --- a/ports/stm32/boards/STM32F7DISC/stm32f7xx_hal_conf.h +++ b/ports/stm32/boards/STM32F7DISC/stm32f7xx_hal_conf.h @@ -46,8 +46,6 @@ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ -#define USE_USB_FS - /* ########################## Module Selection ############################## */ /** * @brief This is the list of modules to be used in the HAL driver diff --git a/ports/stm32/boards/STM32L476DISC/bdev.c b/ports/stm32/boards/STM32L476DISC/bdev.c new file mode 100644 index 000000000..01f06b8b1 --- /dev/null +++ b/ports/stm32/boards/STM32L476DISC/bdev.c @@ -0,0 +1,24 @@ +#include "storage.h" + +// External SPI flash uses standard SPI interface + +STATIC const mp_soft_spi_obj_t soft_spi_bus = { + .delay_half = MICROPY_HW_SOFTSPI_MIN_DELAY, + .polarity = 0, + .phase = 0, + .sck = MICROPY_HW_SPIFLASH_SCK, + .mosi = MICROPY_HW_SPIFLASH_MOSI, + .miso = MICROPY_HW_SPIFLASH_MISO, +}; + +STATIC mp_spiflash_cache_t spi_bdev_cache; + +const mp_spiflash_config_t spiflash_config = { + .bus_kind = MP_SPIFLASH_BUS_SPI, + .bus.u_spi.cs = MICROPY_HW_SPIFLASH_CS, + .bus.u_spi.data = (void*)&soft_spi_bus, + .bus.u_spi.proto = &mp_soft_spi_proto, + .cache = &spi_bdev_cache, +}; + +spi_bdev_t spi_bdev; diff --git a/ports/stm32/boards/STM32L476DISC/board_init.c b/ports/stm32/boards/STM32L476DISC/board_init.c index fdc41c401..eb44f320f 100644 --- a/ports/stm32/boards/STM32L476DISC/board_init.c +++ b/ports/stm32/boards/STM32L476DISC/board_init.c @@ -1,10 +1,9 @@ #include "py/mphal.h" -#include "genhdr/pins.h" void STM32L476DISC_board_early_init(void) { // set SPI flash WP and HOLD pins high - mp_hal_pin_output(&pin_E14); - mp_hal_pin_output(&pin_E15); - mp_hal_pin_write(&pin_E14, 1); - mp_hal_pin_write(&pin_E15, 1); + mp_hal_pin_output(pin_E14); + mp_hal_pin_output(pin_E15); + mp_hal_pin_write(pin_E14, 1); + mp_hal_pin_write(pin_E15, 1); } diff --git a/ports/stm32/boards/STM32L476DISC/mpconfigboard.h b/ports/stm32/boards/STM32L476DISC/mpconfigboard.h index 9dbadd530..a35dee118 100644 --- a/ports/stm32/boards/STM32L476DISC/mpconfigboard.h +++ b/ports/stm32/boards/STM32L476DISC/mpconfigboard.h @@ -4,18 +4,12 @@ void STM32L476DISC_board_early_init(void); #define MICROPY_HW_BOARD_NAME "L476-DISCO" #define MICROPY_HW_MCU_NAME "STM32L476" +#define MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE (0) #define MICROPY_HW_HAS_SWITCH (1) #define MICROPY_HW_HAS_FLASH (1) -#define MICROPY_HW_HAS_SDCARD (0) -#define MICROPY_HW_HAS_MMA7660 (0) -#define MICROPY_HW_HAS_LIS3DSH (0) -#define MICROPY_HW_HAS_LCD (0) #define MICROPY_HW_ENABLE_RNG (1) #define MICROPY_HW_ENABLE_RTC (1) -#define MICROPY_HW_ENABLE_TIMER (1) -#define MICROPY_HW_ENABLE_SERVO (0) -#define MICROPY_HW_ENABLE_DAC (0) -#define MICROPY_HW_ENABLE_CAN (0) +#define MICROPY_HW_ENABLE_USB (1) // use external SPI flash for storage #define MICROPY_HW_SPIFLASH_SIZE_BITS (128 * 1024 * 1024) @@ -24,6 +18,17 @@ void STM32L476DISC_board_early_init(void); #define MICROPY_HW_SPIFLASH_MOSI (pin_E12) #define MICROPY_HW_SPIFLASH_MISO (pin_E13) +// block device config for SPI flash +extern const struct _mp_spiflash_config_t spiflash_config; +extern struct _spi_bdev_t spi_bdev; +#define MICROPY_HW_BDEV_IOCTL(op, arg) ( \ + (op) == BDEV_IOCTL_NUM_BLOCKS ? (MICROPY_HW_SPIFLASH_SIZE_BITS / 8 / FLASH_BLOCK_SIZE) : \ + (op) == BDEV_IOCTL_INIT ? spi_bdev_ioctl(&spi_bdev, (op), (uint32_t)&spiflash_config) : \ + spi_bdev_ioctl(&spi_bdev, (op), (arg)) \ +) +#define MICROPY_HW_BDEV_READBLOCKS(dest, bl, n) spi_bdev_readblocks(&spi_bdev, (dest), (bl), (n)) +#define MICROPY_HW_BDEV_WRITEBLOCKS(src, bl, n) spi_bdev_writeblocks(&spi_bdev, (src), (bl), (n)) + // MSI is used and is 4MHz #define MICROPY_HW_CLK_PLLM (1) #define MICROPY_HW_CLK_PLLN (40) @@ -52,6 +57,10 @@ void STM32L476DISC_board_early_init(void); #define MICROPY_HW_SPI2_MISO (pin_D3) #define MICROPY_HW_SPI2_MOSI (pin_D4) +// CAN busses +#define MICROPY_HW_CAN1_TX (pin_B9) +#define MICROPY_HW_CAN1_RX (pin_B8) + // Joystick is pulled low. Pressing the button makes the input go high. #define MICROPY_HW_USRSW_PIN (pin_A0) #define MICROPY_HW_USRSW_PULL (GPIO_NOPULL) @@ -65,4 +74,5 @@ void STM32L476DISC_board_early_init(void); #define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_low(pin)) // USB config +#define MICROPY_HW_USB_FS (1) // #define MICROPY_HW_USB_OTG_ID_PIN (pin_C12) // This is not the official ID Pin which should be PA10 diff --git a/ports/stm32/boards/STM32L476DISC/mpconfigboard.mk b/ports/stm32/boards/STM32L476DISC/mpconfigboard.mk index 72468d89c..2cad9e2e5 100644 --- a/ports/stm32/boards/STM32L476DISC/mpconfigboard.mk +++ b/ports/stm32/boards/STM32L476DISC/mpconfigboard.mk @@ -1,6 +1,7 @@ MCU_SERIES = l4 CMSIS_MCU = STM32L476xx AF_FILE = boards/stm32l476_af.csv -LD_FILE = boards/stm32l476xg.ld -TEXT_ADDR = 0x08004000 +LD_FILES = boards/stm32l476xg.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08004000 OPENOCD_CONFIG = boards/openocd_stm32l4.cfg diff --git a/ports/stm32/boards/STM32L476DISC/stm32l4xx_hal_conf.h b/ports/stm32/boards/STM32L476DISC/stm32l4xx_hal_conf.h index 9348e0679..6bfb28118 100644 --- a/ports/stm32/boards/STM32L476DISC/stm32l4xx_hal_conf.h +++ b/ports/stm32/boards/STM32L476DISC/stm32l4xx_hal_conf.h @@ -45,7 +45,6 @@ extern "C" { #endif -#define USE_USB_FS /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ diff --git a/ports/stm32/boards/STM32L496GDISC/mpconfigboard.h b/ports/stm32/boards/STM32L496GDISC/mpconfigboard.h new file mode 100644 index 000000000..6a17d74d3 --- /dev/null +++ b/ports/stm32/boards/STM32L496GDISC/mpconfigboard.h @@ -0,0 +1,52 @@ +#define MICROPY_HW_BOARD_NAME "L496G-DISCO" +#define MICROPY_HW_MCU_NAME "STM32L496" + +#define MICROPY_HW_HAS_SWITCH (1) +#define MICROPY_HW_ENABLE_RNG (1) +#define MICROPY_HW_ENABLE_RTC (1) +#define MICROPY_HW_ENABLE_TIMER (1) +#define MICROPY_HW_ENABLE_USB (1) + +// MSI is used and is 4MHz, +// Resulting core frequency is 80MHz: +#define MICROPY_HW_CLK_PLLM (1) +#define MICROPY_HW_CLK_PLLN (40) +#define MICROPY_HW_CLK_PLLP (RCC_PLLP_DIV7) +#define MICROPY_HW_CLK_PLLR (RCC_PLLR_DIV2) +#define MICROPY_HW_CLK_PLLQ (RCC_PLLQ_DIV2) + +#define MICROPY_HW_FLASH_LATENCY FLASH_LATENCY_4 + +// USART config +#define MICROPY_HW_UART2_TX (pin_A2) +#define MICROPY_HW_UART2_RX (pin_D6) +// USART 2 is connected to the virtual com port on the ST-LINK +#define MICROPY_HW_UART_REPL PYB_UART_2 +#define MICROPY_HW_UART_REPL_BAUD 115200 + +// I2C busses +#define MICROPY_HW_I2C1_SCL (pin_G14) +#define MICROPY_HW_I2C1_SDA (pin_G13) +#define MICROPY_HW_I2C2_SCL (pin_H4) +#define MICROPY_HW_I2C2_SDA (pin_B14) + +// SPI busses +// -> To the arduino connector +#define MICROPY_HW_SPI1_NSS (pin_A15) +#define MICROPY_HW_SPI1_SCK (pin_A5) +#define MICROPY_HW_SPI1_MISO (pin_B4) +#define MICROPY_HW_SPI1_MOSI (pin_B5) + +// Use Sel from joystick. Joystick is pulled low. Pressing the button makes the input go high. +#define MICROPY_HW_USRSW_PIN (pin_C13) +#define MICROPY_HW_USRSW_PULL (GPIO_PULLDOWN) +#define MICROPY_HW_USRSW_EXTI_MODE (GPIO_MODE_IT_RISING) +#define MICROPY_HW_USRSW_PRESSED (1) + +// LED (The orange LED is controlled over MFX) +#define MICROPY_HW_LED1 (pin_B13) // Green +#define MICROPY_HW_LED_ON(pin) (mp_hal_pin_low(pin)) +#define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_high(pin)) +// USB config +#define MICROPY_HW_USB_FS (1) +#define MICROPY_HW_USB_OTG_ID_PIN (pin_A10) diff --git a/ports/stm32/boards/STM32L496GDISC/mpconfigboard.mk b/ports/stm32/boards/STM32L496GDISC/mpconfigboard.mk new file mode 100644 index 000000000..3a6174655 --- /dev/null +++ b/ports/stm32/boards/STM32L496GDISC/mpconfigboard.mk @@ -0,0 +1,7 @@ +MCU_SERIES = l4 +CMSIS_MCU = STM32L496xx +AF_FILE = boards/stm32l496_af.csv +LD_FILES = boards/stm32l496xg.ld boards/common_ifs.ld +TEXT0_ADDR = 0x08000000 +TEXT1_ADDR = 0x08004000 +OPENOCD_CONFIG = boards/openocd_stm32l4.cfg diff --git a/ports/stm32/boards/STM32L496GDISC/pins.csv b/ports/stm32/boards/STM32L496GDISC/pins.csv new file mode 100644 index 000000000..2ee054032 --- /dev/null +++ b/ports/stm32/boards/STM32L496GDISC/pins.csv @@ -0,0 +1,140 @@ +PA0,PA0 +PA1,PA1 +PA2,PA2 +PA3,PA3 +PA4,PA4 +PA5,PA5 +PA6,PA6 +PA7,PA7 +PA8,PA8 +PA9,PA9 +PA10,PA10 +PA11,PA11 +PA12,PA12 +PA13,PA13 +PA14,PA14 +PA15,PA15 +PB0,PB0 +PB1,PB1 +PB2,PB2 +PB3,PB3 +PB4,PB4 +PB5,PB5 +PB6,PB6 +PB7,PB7 +PB8,PB8 +PB9,PB9 +PB10,PB10 +PB11,PB11 +PB12,PB12 +PB13,PB13 +PB14,PB14 +PB15,PB15 +PC0,PC0 +PC1,PC1 +PC2,PC2 +PC3,PC3 +PC4,PC4 +PC5,PC5 +PC6,PC6 +PC7,PC7 +PC8,PC8 +PC9,PC9 +PC10,PC10 +PC11,PC11 +PC12,PC12 +PC13,PC13 +PC14,PC14 +PC15,PC15 +PD0,PD0 +PD1,PD1 +PD2,PD2 +PD3,PD3 +PD4,PD4 +PD5,PD5 +PD6,PD6 +PD7,PD7 +PD8,PD8 +PD9,PD9 +PD10,PD10 +PD11,PD11 +PD12,PD12 +PD13,PD13 +PD14,PD14 +PD15,PD15 +PE0,PE0 +PE1,PE1 +PE2,PE2 +PE3,PE3 +PE4,PE4 +PE5,PE5 +PE6,PE6 +PE7,PE7 +PE8,PE8 +PE9,PE9 +PE10,PE10 +PE11,PE11 +PE12,PE12 +PE13,PE13 +PE14,PE14 +PE15,PE15 +PF0,PF0 +PF1,PF1 +PF2,PF2 +PF3,PF3 +PF4,PF4 +PF5,PF5 +PF6,PF6 +PF7,PF7 +PF8,PF8 +PF9,PF9 +PF10,PF10 +PF11,PF11 +PF12,PF12 +PF13,PF13 +PF14,PF14 +PF15,PF15 +PG0,PG0 +PG1,PG1 +PG2,PG2 +PG3,PG3 +PG4,PG4 +PG5,PG5 +PG6,PG6 +PG7,PG7 +PG8,PG8 +PG9,PG9 +PG10,PG10 +PG11,PG11 +PG12,PG12 +PG13,PG13 +PG14,PG14 +PG15,PG15 +PH0,PH0 +PH1,PH1 +PH2,PH2 +PH3,PH3 +PH4,PH4 +PH5,PH5 +PH6,PH6 +PH7,PH7 +PH8,PH8 +PH9,PH9 +PH10,PH10 +PH11,PH11 +PH12,PH12 +PH13,PH13 +PH14,PH14 +PH15,PH15 +PI0,PI0 +PI1,PI1 +PI2,PI2 +PI3,PI3 +PI4,PI4 +PI5,PI5 +PI6,PI6 +PI7,PI7 +PI8,PI8 +PI9,PI9 +PI10,PI10 +PI11,PI11 diff --git a/ports/stm32/boards/STM32L496GDISC/stm32l4xx_hal_conf.h b/ports/stm32/boards/STM32L496GDISC/stm32l4xx_hal_conf.h new file mode 100644 index 000000000..884db5ef1 --- /dev/null +++ b/ports/stm32/boards/STM32L496GDISC/stm32l4xx_hal_conf.h @@ -0,0 +1,421 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_conf.h + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2018 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L4xx_HAL_CONF_H +#define __STM32L4xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ + +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +/*#define HAL_CRYP_MODULE_ENABLED */ +#define HAL_CAN_MODULE_ENABLED +/* #define HAL_COMP_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +#define HAL_DAC_MODULE_ENABLED +/* #define HAL_DCMI_MODULE_ENABLED */ +/*#define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +/*#define HAL_DSI_MODULE_ENABLED */ +/*#define HAL_FIREWALL_MODULE_ENABLED */ +/*#define HAL_GFXMMU_MODULE_ENABLED */ +/*#define HAL_HCD_MODULE_ENABLED */ +/*#define HAL_HASH_MODULE_ENABLED */ +/*#define HAL_I2S_MODULE_ENABLED */ +/*#define HAL_IRDA_MODULE_ENABLED */ +/*#define HAL_IWDG_MODULE_ENABLED */ +/*#define HAL_LTDC_MODULE_ENABLED */ +/*#define HAL_LCD_MODULE_ENABLED */ +/*#define HAL_LPTIM_MODULE_ENABLED */ +/*#define HAL_NAND_MODULE_ENABLED */ +/*#define HAL_NOR_MODULE_ENABLED */ +/*#define HAL_OPAMP_MODULE_ENABLED */ +/*#define HAL_OSPI_MODULE_ENABLED */ +#define HAL_PCD_MODULE_ENABLED +#define HAL_RNG_MODULE_ENABLED +#define HAL_RTC_MODULE_ENABLED +/* #define HAL_SAI_MODULE_ENABLED */ +#define HAL_SD_MODULE_ENABLED +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +#define HAL_SPI_MODULE_ENABLED +/*#define HAL_SRAM_MODULE_ENABLED */ +/*#define HAL_SWPMI_MODULE_ENABLED */ +#define HAL_TIM_MODULE_ENABLED +/*#define HAL_TSC_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/*#define HAL_USART_MODULE_ENABLED */ +/*#define HAL_WWDG_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal Multiple Speed oscillator (MSI) default value. + * This value is the default MSI range value after Reset. + */ +#if !defined (MSI_VALUE) + #define MSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* MSI_VALUE */ +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + + /** + * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG. + * This internal oscillator is mainly dedicated to provide a high precision clock to + * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. + * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency + * which is subject to manufacturing process variations. + */ + #if !defined (HSI48_VALUE) + #define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. + The real value my vary depending on manufacturing process variations.*/ + #endif /* HSI48_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)32000) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for SAI1 peripheral + * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source + * frequency. + */ +#if !defined (EXTERNAL_SAI1_CLOCK_VALUE) + #define EXTERNAL_SAI1_CLOCK_VALUE ((uint32_t)48000) /*!< Value of the SAI1 External clock source in Hz*/ +#endif /* EXTERNAL_SAI1_CLOCK_VALUE */ + +/** + * @brief External clock source for SAI2 peripheral + * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source + * frequency. + */ +#if !defined (EXTERNAL_SAI2_CLOCK_VALUE) + #define EXTERNAL_SAI2_CLOCK_VALUE ((uint32_t)48000) /*!< Value of the SAI2 External clock source in Hz*/ +#endif /* EXTERNAL_SAI2_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0x00) /*!< tick interrupt priority */ +#define USE_RTOS 0 +#define PREFETCH_ENABLE 1 +#define INSTRUCTION_CACHE_ENABLE 1 +#define DATA_CACHE_ENABLE 1 + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver + * Activated: CRC code is present inside driver + * Deactivated: CRC code cleaned from driver + */ + +#define USE_SPI_CRC 0 + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32l4xx_hal_rcc.h" + #include "stm32l4xx_hal_rcc_ex.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32l4xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32l4xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32l4xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32l4xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32l4xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32l4xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32l4xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32l4xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32l4xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32l4xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32l4xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32l4xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32l4xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_FIREWALL_MODULE_ENABLED + #include "stm32l4xx_hal_firewall.h" +#endif /* HAL_FIREWALL_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32l4xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32l4xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32l4xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32l4xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32l4xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32l4xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32l4xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LCD_MODULE_ENABLED + #include "stm32l4xx_hal_lcd.h" +#endif /* HAL_LCD_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32l4xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32l4xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_OPAMP_MODULE_ENABLED + #include "stm32l4xx_hal_opamp.h" +#endif /* HAL_OPAMP_MODULE_ENABLED */ + +#ifdef HAL_OSPI_MODULE_ENABLED + #include "stm32l4xx_hal_ospi.h" +#endif /* HAL_OSPI_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32l4xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32l4xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32l4xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32l4xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32l4xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32l4xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32l4xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32l4xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_SWPMI_MODULE_ENABLED + #include "stm32l4xx_hal_swpmi.h" +#endif /* HAL_SWPMI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32l4xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_TSC_MODULE_ENABLED + #include "stm32l4xx_hal_tsc.h" +#endif /* HAL_TSC_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32l4xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32l4xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32l4xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32l4xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32l4xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32l4xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32l4xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_GFXMMU_MODULE_ENABLED + #include "stm32l4xx_hal_gfxmmu.h" +#endif /* HAL_GFXMMU_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L4xx_HAL_CONF_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/ports/stm32/boards/common_basic.ld b/ports/stm32/boards/common_basic.ld new file mode 100644 index 000000000..2e428aa62 --- /dev/null +++ b/ports/stm32/boards/common_basic.ld @@ -0,0 +1,86 @@ +/* Memory layout for basic configuration: + + FLASH .isr_vector + FLASH .text + FLASH .data + + RAM .data + RAM .bss + RAM .heap + RAM .stack +*/ + +ENTRY(Reset_Handler) + +/* define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text*) /* .text* sections (code) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + /* *(.glue_7) */ /* glue arm to thumb code */ + /* *(.glue_7t) */ /* glue thumb to arm code */ + + . = ALIGN(4); + _etext = .; /* define a global symbol at end of code */ + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* This is the initialized data section + The program executes knowing that the data is in the RAM + but the loader puts the initial values in the FLASH (inidata). + It is one task of the startup to copy the initial values from FLASH to RAM. */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start; used by startup code in order to initialise the .data section in RAM */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end; used by startup code in order to initialise the .data section in RAM */ + } >RAM AT> FLASH + + /* Uninitialized data section */ + .bss : + { + . = ALIGN(4); + _sbss = .; /* define a global symbol at bss start; used by startup code */ + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end; used by startup code and GC */ + } >RAM + + /* this is to define the start of the heap, and make sure we have a minimum size */ + .heap : + { + . = ALIGN(4); + . = . + _minimum_heap_size; + . = ALIGN(4); + } >RAM + + /* this just checks there is enough RAM for the stack */ + .stack : + { + . = ALIGN(4); + . = . + _minimum_stack_size; + . = ALIGN(4); + } >RAM + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/ports/stm32/boards/common_bl.ld b/ports/stm32/boards/common_bl.ld new file mode 100644 index 000000000..52b2a677d --- /dev/null +++ b/ports/stm32/boards/common_bl.ld @@ -0,0 +1,86 @@ +/* Memory layout for bootloader configuration (this here describes the app part): + + FLASH_APP .isr_vector + FLASH_APP .text + FLASH_APP .data + + RAM .data + RAM .bss + RAM .heap + RAM .stack +*/ + +ENTRY(Reset_Handler) + +/* define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + + . = ALIGN(4); + } >FLASH_APP + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text*) /* .text* sections (code) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + /* *(.glue_7) */ /* glue arm to thumb code */ + /* *(.glue_7t) */ /* glue thumb to arm code */ + + . = ALIGN(4); + _etext = .; /* define a global symbol at end of code */ + } >FLASH_APP + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* This is the initialized data section + The program executes knowing that the data is in the RAM + but the loader puts the initial values in the FLASH (inidata). + It is one task of the startup to copy the initial values from FLASH to RAM. */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start; used by startup code in order to initialise the .data section in RAM */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end; used by startup code in order to initialise the .data section in RAM */ + } >RAM AT> FLASH_APP + + /* Uninitialized data section */ + .bss : + { + . = ALIGN(4); + _sbss = .; /* define a global symbol at bss start; used by startup code */ + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end; used by startup code and GC */ + } >RAM + + /* this is to define the start of the heap, and make sure we have a minimum size */ + .heap : + { + . = ALIGN(4); + . = . + _minimum_heap_size; + . = ALIGN(4); + } >RAM + + /* this just checks there is enough RAM for the stack */ + .stack : + { + . = ALIGN(4); + . = . + _minimum_stack_size; + . = ALIGN(4); + } >RAM + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/ports/stm32/boards/common.ld b/ports/stm32/boards/common_ifs.ld index e5dea49d0..74b2ffb41 100644 --- a/ports/stm32/boards/common.ld +++ b/ports/stm32/boards/common_ifs.ld @@ -1,3 +1,16 @@ +/* Memory layout for internal flash storage configuration: + + FLASH_ISR .isr_vector + + FLASH_TEXT .text + FLASH_TEXT .data + + RAM .data + RAM .bss + RAM .heap + RAM .stack +*/ + ENTRY(Reset_Handler) /* define output sections */ diff --git a/ports/stm32/boards/make-pins.py b/ports/stm32/boards/make-pins.py index 210c7b63c..70f154fde 100755 --- a/ports/stm32/boards/make-pins.py +++ b/ports/stm32/boards/make-pins.py @@ -16,6 +16,7 @@ SUPPORTED_FN = { 'UART' : ['RX', 'TX', 'CTS', 'RTS'], 'SPI' : ['NSS', 'SCK', 'MISO', 'MOSI'], 'SDMMC' : ['CK', 'CMD', 'D0', 'D1', 'D2', 'D3'], + 'CAN' : ['TX', 'RX'], } CONDITIONAL_VAR = { @@ -25,6 +26,7 @@ CONDITIONAL_VAR = { 'UART' : 'MICROPY_HW_UART{num}_TX', 'USART' : 'MICROPY_HW_UART{num}_TX', 'SDMMC' : 'MICROPY_HW_SDMMC{num}_CK', + 'CAN' : 'MICROPY_HW_CAN{num}_TX', } def parse_port_pin(name_str): @@ -207,18 +209,18 @@ class Pin(object): print("// ", end='') print('};') print('') - print('const pin_obj_t pin_{:s} = PIN({:s}, {:d}, {:s}, {:s}, {:d});'.format( + print('const pin_obj_t pin_{:s}_obj = PIN({:s}, {:d}, {:s}, {:s}, {:d});'.format( self.cpu_pin_name(), self.port_letter(), self.pin, self.alt_fn_name(null_if_0=True), self.adc_num_str(), self.adc_channel)) print('') def print_header(self, hdr_file): - hdr_file.write('extern const pin_obj_t pin_{:s};\n'. - format(self.cpu_pin_name())) + n = self.cpu_pin_name() + hdr_file.write('extern const pin_obj_t pin_{:s}_obj;\n'.format(n)) + hdr_file.write('#define pin_{:s} (&pin_{:s}_obj)\n'.format(n, n)) if self.alt_fn_count > 0: - hdr_file.write('extern const pin_af_obj_t pin_{:s}_af[];\n'. - format(self.cpu_pin_name())) + hdr_file.write('extern const pin_af_obj_t pin_{:s}_af[];\n'.format(n)) def qstr_list(self): result = [] @@ -287,7 +289,7 @@ class Pins(object): for named_pin in named_pins: pin = named_pin.pin() if pin.is_board_pin(): - print(' {{ MP_ROM_QSTR(MP_QSTR_{:s}), MP_ROM_PTR(&pin_{:s}) }},'.format(named_pin.name(), pin.cpu_pin_name())) + print(' {{ MP_ROM_QSTR(MP_QSTR_{:s}), MP_ROM_PTR(&pin_{:s}_obj) }},'.format(named_pin.name(), pin.cpu_pin_name())) print('};') print('MP_DEFINE_CONST_DICT(pin_{:s}_pins_locals_dict, pin_{:s}_pins_locals_dict_table);'.format(label, label)); @@ -305,13 +307,13 @@ class Pins(object): print('const pin_obj_t * const pin_adc{:d}[] = {{'.format(adc_num)) for channel in range(17): if channel == 16: - print('#if defined(MCU_SERIES_L4)') + print('#if defined(STM32L4)') adc_found = False for named_pin in self.cpu_pins: pin = named_pin.pin() if (pin.is_board_pin() and (pin.adc_num & (1 << (adc_num - 1))) and (pin.adc_channel == channel)): - print(' &pin_{:s}, // {:d}'.format(pin.cpu_pin_name(), channel)) + print(' &pin_{:s}_obj, // {:d}'.format(pin.cpu_pin_name(), channel)) adc_found = True break if not adc_found: diff --git a/ports/stm32/boards/startup_stm32f0.s b/ports/stm32/boards/startup_stm32f0.s new file mode 100644 index 000000000..eb5c4961e --- /dev/null +++ b/ports/stm32/boards/startup_stm32f0.s @@ -0,0 +1,303 @@ +/** + ****************************************************************************** + * @file startup_stm32f091xc.s + * @author MCD Application Team + * @brief STM32F091xC devices vector table for GCC toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M0 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m0 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr r0, =_estack + mov sp, r0 /* set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 + +LoopCopyDataInit: + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit + +/* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss + +FillZerobss: + str r3, [r2] + adds r2, r2, #4 + +LoopFillZerobss: + cmp r2, r4 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + /*bl __libc_init_array*/ +/* Call the application's entry point.*/ + bl main + +LoopForever: + b LoopForever + + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M0. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word 0 + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WWDG_IRQHandler /* Window WatchDog */ + .word PVD_VDDIO2_IRQHandler /* PVD and VDDIO2 through EXTI Line detect */ + .word RTC_IRQHandler /* RTC through the EXTI line */ + .word FLASH_IRQHandler /* FLASH */ + .word RCC_CRS_IRQHandler /* RCC and CRS */ + .word EXTI0_1_IRQHandler /* EXTI Line 0 and 1 */ + .word EXTI2_3_IRQHandler /* EXTI Line 2 and 3 */ + .word EXTI4_15_IRQHandler /* EXTI Line 4 to 15 */ + .word TSC_IRQHandler /* TSC */ + .word DMA1_Ch1_IRQHandler /* DMA1 Channel 1 */ + .word DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler /* DMA1 Channel 2 and 3 & DMA2 Channel 1 and 2 */ + .word DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler /* DMA1 Channel 4 to 7 & DMA2 Channel 3 to 5 */ + .word ADC1_COMP_IRQHandler /* ADC1, COMP1 and COMP2 */ + .word TIM1_BRK_UP_TRG_COM_IRQHandler /* TIM1 Break, Update, Trigger and Commutation */ + .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .word TIM2_IRQHandler /* TIM2 */ + .word TIM3_IRQHandler /* TIM3 */ + .word TIM6_DAC_IRQHandler /* TIM6 and DAC */ + .word TIM7_IRQHandler /* TIM7 */ + .word TIM14_IRQHandler /* TIM14 */ + .word TIM15_IRQHandler /* TIM15 */ + .word TIM16_IRQHandler /* TIM16 */ + .word TIM17_IRQHandler /* TIM17 */ + .word I2C1_IRQHandler /* I2C1 */ + .word I2C2_IRQHandler /* I2C2 */ + .word SPI1_IRQHandler /* SPI1 */ + .word SPI2_IRQHandler /* SPI2 */ + .word USART1_IRQHandler /* USART1 */ + .word USART2_IRQHandler /* USART2 */ + .word USART3_8_IRQHandler /* USART3, USART4, USART5, USART6, USART7, USART8 */ + .word CEC_CAN_IRQHandler /* CEC and CAN */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_VDDIO2_IRQHandler + .thumb_set PVD_VDDIO2_IRQHandler,Default_Handler + + .weak RTC_IRQHandler + .thumb_set RTC_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_CRS_IRQHandler + .thumb_set RCC_CRS_IRQHandler,Default_Handler + + .weak EXTI0_1_IRQHandler + .thumb_set EXTI0_1_IRQHandler,Default_Handler + + .weak EXTI2_3_IRQHandler + .thumb_set EXTI2_3_IRQHandler,Default_Handler + + .weak EXTI4_15_IRQHandler + .thumb_set EXTI4_15_IRQHandler,Default_Handler + + .weak TSC_IRQHandler + .thumb_set TSC_IRQHandler,Default_Handler + + .weak DMA1_Ch1_IRQHandler + .thumb_set DMA1_Ch1_IRQHandler,Default_Handler + + .weak DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler + .thumb_set DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler,Default_Handler + + .weak DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler + .thumb_set DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler,Default_Handler + + .weak ADC1_COMP_IRQHandler + .thumb_set ADC1_COMP_IRQHandler,Default_Handler + + .weak TIM1_BRK_UP_TRG_COM_IRQHandler + .thumb_set TIM1_BRK_UP_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM6_DAC_IRQHandler + .thumb_set TIM6_DAC_IRQHandler,Default_Handler + + .weak TIM7_IRQHandler + .thumb_set TIM7_IRQHandler,Default_Handler + + .weak TIM14_IRQHandler + .thumb_set TIM14_IRQHandler,Default_Handler + + .weak TIM15_IRQHandler + .thumb_set TIM15_IRQHandler,Default_Handler + + .weak TIM16_IRQHandler + .thumb_set TIM16_IRQHandler,Default_Handler + + .weak TIM17_IRQHandler + .thumb_set TIM17_IRQHandler,Default_Handler + + .weak I2C1_IRQHandler + .thumb_set I2C1_IRQHandler,Default_Handler + + .weak I2C2_IRQHandler + .thumb_set I2C2_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_8_IRQHandler + .thumb_set USART3_8_IRQHandler,Default_Handler + + .weak CEC_CAN_IRQHandler + .thumb_set CEC_CAN_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/ports/stm32/boards/startup_stm32f4.s b/ports/stm32/boards/startup_stm32f4.s new file mode 100644 index 000000000..3e29a79a5 --- /dev/null +++ b/ports/stm32/boards/startup_stm32f4.s @@ -0,0 +1,530 @@ +/** + ****************************************************************************** + * @file startup_stm32.S + * @author MCD Application Team + * @version V2.0.0 + * @date 18-February-2014 + * @brief STM32Fxxxxx Devices vector table for Atollic TrueSTUDIO toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M4/M7 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m4 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss +/* stack used for SystemInit_ExtMemCtl; always internal RAM used */ + +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr sp, =_estack /* set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2], #4 + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system initialization function.*/ + bl SystemInit +/* Call static constructors */ + /*bl __libc_init_array*/ +/* Call the application's entry point.*/ + bl main + bx lr +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * @param None + * @retval None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M4/M7. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +*******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + /* External Interrupts */ + .word WWDG_IRQHandler /* Window WatchDog */ + .word PVD_IRQHandler /* PVD through EXTI Line detection */ + .word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */ + .word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */ + .word FLASH_IRQHandler /* FLASH */ + .word RCC_IRQHandler /* RCC */ + .word EXTI0_IRQHandler /* EXTI Line0 */ + .word EXTI1_IRQHandler /* EXTI Line1 */ + .word EXTI2_IRQHandler /* EXTI Line2 */ + .word EXTI3_IRQHandler /* EXTI Line3 */ + .word EXTI4_IRQHandler /* EXTI Line4 */ + .word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */ + .word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */ + .word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */ + .word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */ + .word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */ + .word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */ + .word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */ + .word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */ + .word CAN1_TX_IRQHandler /* CAN1 TX */ + .word CAN1_RX0_IRQHandler /* CAN1 RX0 */ + .word CAN1_RX1_IRQHandler /* CAN1 RX1 */ + .word CAN1_SCE_IRQHandler /* CAN1 SCE */ + .word EXTI9_5_IRQHandler /* External Line[9:5]s */ + .word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */ + .word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */ + .word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */ + .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .word TIM2_IRQHandler /* TIM2 */ + .word TIM3_IRQHandler /* TIM3 */ + .word TIM4_IRQHandler /* TIM4 */ + .word I2C1_EV_IRQHandler /* I2C1 Event */ + .word I2C1_ER_IRQHandler /* I2C1 Error */ + .word I2C2_EV_IRQHandler /* I2C2 Event */ + .word I2C2_ER_IRQHandler /* I2C2 Error */ + .word SPI1_IRQHandler /* SPI1 */ + .word SPI2_IRQHandler /* SPI2 */ + .word USART1_IRQHandler /* USART1 */ + .word USART2_IRQHandler /* USART2 */ + .word USART3_IRQHandler /* USART3 */ + .word EXTI15_10_IRQHandler /* External Line[15:10]s */ + .word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */ + .word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */ + .word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */ + .word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */ + .word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */ + .word TIM8_CC_IRQHandler /* TIM8 Capture Compare */ + .word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */ + .word FSMC_IRQHandler /* FSMC */ + .word SDIO_IRQHandler /* SDIO */ + .word TIM5_IRQHandler /* TIM5 */ + .word SPI3_IRQHandler /* SPI3 */ + .word UART4_IRQHandler /* UART4 */ + .word UART5_IRQHandler /* UART5 */ + .word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */ + .word TIM7_IRQHandler /* TIM7 */ + .word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */ + .word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */ + .word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */ + .word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */ + .word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */ + .word ETH_IRQHandler /* Ethernet */ + .word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */ + .word CAN2_TX_IRQHandler /* CAN2 TX */ + .word CAN2_RX0_IRQHandler /* CAN2 RX0 */ + .word CAN2_RX1_IRQHandler /* CAN2 RX1 */ + .word CAN2_SCE_IRQHandler /* CAN2 SCE */ + .word OTG_FS_IRQHandler /* USB OTG FS */ + .word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */ + .word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */ + .word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */ + .word USART6_IRQHandler /* USART6 */ + .word I2C3_EV_IRQHandler /* I2C3 event */ + .word I2C3_ER_IRQHandler /* I2C3 error */ + .word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */ + .word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */ + .word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */ + .word OTG_HS_IRQHandler /* USB OTG HS */ + .word DCMI_IRQHandler /* DCMI */ + .word 0 /* CRYP crypto */ + .word HASH_RNG_IRQHandler /* Hash and Rng */ + .word FPU_IRQHandler /* FPU */ + .word UART7_IRQHandler /* UART7 */ + .word UART8_IRQHandler /* UART8 */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak TAMP_STAMP_IRQHandler + .thumb_set TAMP_STAMP_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Stream0_IRQHandler + .thumb_set DMA1_Stream0_IRQHandler,Default_Handler + + .weak DMA1_Stream1_IRQHandler + .thumb_set DMA1_Stream1_IRQHandler,Default_Handler + + .weak DMA1_Stream2_IRQHandler + .thumb_set DMA1_Stream2_IRQHandler,Default_Handler + + .weak DMA1_Stream3_IRQHandler + .thumb_set DMA1_Stream3_IRQHandler,Default_Handler + + .weak DMA1_Stream4_IRQHandler + .thumb_set DMA1_Stream4_IRQHandler,Default_Handler + + .weak DMA1_Stream5_IRQHandler + .thumb_set DMA1_Stream5_IRQHandler,Default_Handler + + .weak DMA1_Stream6_IRQHandler + .thumb_set DMA1_Stream6_IRQHandler,Default_Handler + + .weak ADC_IRQHandler + .thumb_set ADC_IRQHandler,Default_Handler + + .weak CAN1_TX_IRQHandler + .thumb_set CAN1_TX_IRQHandler,Default_Handler + + .weak CAN1_RX0_IRQHandler + .thumb_set CAN1_RX0_IRQHandler,Default_Handler + + .weak CAN1_RX1_IRQHandler + .thumb_set CAN1_RX1_IRQHandler,Default_Handler + + .weak CAN1_SCE_IRQHandler + .thumb_set CAN1_SCE_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_TIM9_IRQHandler + .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler + + .weak TIM1_UP_TIM10_IRQHandler + .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_TIM11_IRQHandler + .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM4_IRQHandler + .thumb_set TIM4_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C2_EV_IRQHandler + .thumb_set I2C2_EV_IRQHandler,Default_Handler + + .weak I2C2_ER_IRQHandler + .thumb_set I2C2_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_IRQHandler + .thumb_set USART3_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak OTG_FS_WKUP_IRQHandler + .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler + + .weak TIM8_BRK_TIM12_IRQHandler + .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler + + .weak TIM8_UP_TIM13_IRQHandler + .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler + + .weak TIM8_TRG_COM_TIM14_IRQHandler + .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler + + .weak TIM8_CC_IRQHandler + .thumb_set TIM8_CC_IRQHandler,Default_Handler + + .weak DMA1_Stream7_IRQHandler + .thumb_set DMA1_Stream7_IRQHandler,Default_Handler + + .weak FSMC_IRQHandler + .thumb_set FSMC_IRQHandler,Default_Handler + + .weak SDIO_IRQHandler + .thumb_set SDIO_IRQHandler,Default_Handler + + .weak TIM5_IRQHandler + .thumb_set TIM5_IRQHandler,Default_Handler + + .weak SPI3_IRQHandler + .thumb_set SPI3_IRQHandler,Default_Handler + + .weak UART4_IRQHandler + .thumb_set UART4_IRQHandler,Default_Handler + + .weak UART5_IRQHandler + .thumb_set UART5_IRQHandler,Default_Handler + + .weak TIM6_DAC_IRQHandler + .thumb_set TIM6_DAC_IRQHandler,Default_Handler + + .weak TIM7_IRQHandler + .thumb_set TIM7_IRQHandler,Default_Handler + + .weak DMA2_Stream0_IRQHandler + .thumb_set DMA2_Stream0_IRQHandler,Default_Handler + + .weak DMA2_Stream1_IRQHandler + .thumb_set DMA2_Stream1_IRQHandler,Default_Handler + + .weak DMA2_Stream2_IRQHandler + .thumb_set DMA2_Stream2_IRQHandler,Default_Handler + + .weak DMA2_Stream3_IRQHandler + .thumb_set DMA2_Stream3_IRQHandler,Default_Handler + + .weak DMA2_Stream4_IRQHandler + .thumb_set DMA2_Stream4_IRQHandler,Default_Handler + + .weak ETH_IRQHandler + .thumb_set ETH_IRQHandler,Default_Handler + + .weak ETH_WKUP_IRQHandler + .thumb_set ETH_WKUP_IRQHandler,Default_Handler + + .weak CAN2_TX_IRQHandler + .thumb_set CAN2_TX_IRQHandler,Default_Handler + + .weak CAN2_RX0_IRQHandler + .thumb_set CAN2_RX0_IRQHandler,Default_Handler + + .weak CAN2_RX1_IRQHandler + .thumb_set CAN2_RX1_IRQHandler,Default_Handler + + .weak CAN2_SCE_IRQHandler + .thumb_set CAN2_SCE_IRQHandler,Default_Handler + + .weak OTG_FS_IRQHandler + .thumb_set OTG_FS_IRQHandler,Default_Handler + + .weak DMA2_Stream5_IRQHandler + .thumb_set DMA2_Stream5_IRQHandler,Default_Handler + + .weak DMA2_Stream6_IRQHandler + .thumb_set DMA2_Stream6_IRQHandler,Default_Handler + + .weak DMA2_Stream7_IRQHandler + .thumb_set DMA2_Stream7_IRQHandler,Default_Handler + + .weak USART6_IRQHandler + .thumb_set USART6_IRQHandler,Default_Handler + + .weak I2C3_EV_IRQHandler + .thumb_set I2C3_EV_IRQHandler,Default_Handler + + .weak I2C3_ER_IRQHandler + .thumb_set I2C3_ER_IRQHandler,Default_Handler + + .weak OTG_HS_EP1_OUT_IRQHandler + .thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler + + .weak OTG_HS_EP1_IN_IRQHandler + .thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler + + .weak OTG_HS_WKUP_IRQHandler + .thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler + + .weak OTG_HS_IRQHandler + .thumb_set OTG_HS_IRQHandler,Default_Handler + + .weak DCMI_IRQHandler + .thumb_set DCMI_IRQHandler,Default_Handler + + .weak HASH_RNG_IRQHandler + .thumb_set HASH_RNG_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler + + .weak UART7_IRQHandler + .thumb_set UART7_IRQHandler,Default_Handler + + .weak UART8_IRQHandler + .thumb_set UART8_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/ports/stm32/boards/startup_stm32f7.s b/ports/stm32/boards/startup_stm32f7.s new file mode 100644 index 000000000..633ba01e9 --- /dev/null +++ b/ports/stm32/boards/startup_stm32f7.s @@ -0,0 +1,604 @@ +/** + ****************************************************************************** + * @file startup_stm32.S + * @author MCD Application Team + * @version V2.0.0 + * @date 18-February-2014 + * @brief STM32Fxxxxx Devices vector table for Atollic TrueSTUDIO toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M4/M7 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m7 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss +/* stack used for SystemInit_ExtMemCtl; always internal RAM used */ + +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr sp, =_estack /* set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2], #4 + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system initialization function.*/ + bl SystemInit +/* Call static constructors */ + /*bl __libc_init_array*/ +/* Call the application's entry point.*/ + bl main + bx lr +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * @param None + * @retval None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M4/M7. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +*******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + /* External Interrupts */ + .word WWDG_IRQHandler /* Window WatchDog */ + .word PVD_IRQHandler /* PVD through EXTI Line detection */ + .word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */ + .word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */ + .word FLASH_IRQHandler /* FLASH */ + .word RCC_IRQHandler /* RCC */ + .word EXTI0_IRQHandler /* EXTI Line0 */ + .word EXTI1_IRQHandler /* EXTI Line1 */ + .word EXTI2_IRQHandler /* EXTI Line2 */ + .word EXTI3_IRQHandler /* EXTI Line3 */ + .word EXTI4_IRQHandler /* EXTI Line4 */ + .word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */ + .word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */ + .word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */ + .word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */ + .word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */ + .word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */ + .word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */ + .word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */ + .word CAN1_TX_IRQHandler /* CAN1 TX */ + .word CAN1_RX0_IRQHandler /* CAN1 RX0 */ + .word CAN1_RX1_IRQHandler /* CAN1 RX1 */ + .word CAN1_SCE_IRQHandler /* CAN1 SCE */ + .word EXTI9_5_IRQHandler /* External Line[9:5]s */ + .word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */ + .word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */ + .word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */ + .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .word TIM2_IRQHandler /* TIM2 */ + .word TIM3_IRQHandler /* TIM3 */ + .word TIM4_IRQHandler /* TIM4 */ + .word I2C1_EV_IRQHandler /* I2C1 Event */ + .word I2C1_ER_IRQHandler /* I2C1 Error */ + .word I2C2_EV_IRQHandler /* I2C2 Event */ + .word I2C2_ER_IRQHandler /* I2C2 Error */ + .word SPI1_IRQHandler /* SPI1 */ + .word SPI2_IRQHandler /* SPI2 */ + .word USART1_IRQHandler /* USART1 */ + .word USART2_IRQHandler /* USART2 */ + .word USART3_IRQHandler /* USART3 */ + .word EXTI15_10_IRQHandler /* External Line[15:10]s */ + .word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */ + .word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */ + .word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */ + .word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */ + .word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */ + .word TIM8_CC_IRQHandler /* TIM8 Capture Compare */ + .word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */ + .word FMC_IRQHandler /* FMC */ + .word SDMMC1_IRQHandler /* SDMMC1 */ + .word TIM5_IRQHandler /* TIM5 */ + .word SPI3_IRQHandler /* SPI3 */ + .word UART4_IRQHandler /* UART4 */ + .word UART5_IRQHandler /* UART5 */ + .word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */ + .word TIM7_IRQHandler /* TIM7 */ + .word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */ + .word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */ + .word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */ + .word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */ + .word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */ + .word ETH_IRQHandler /* Ethernet */ + .word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */ + .word CAN2_TX_IRQHandler /* CAN2 TX */ + .word CAN2_RX0_IRQHandler /* CAN2 RX0 */ + .word CAN2_RX1_IRQHandler /* CAN2 RX1 */ + .word CAN2_SCE_IRQHandler /* CAN2 SCE */ + .word OTG_FS_IRQHandler /* USB OTG FS */ + .word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */ + .word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */ + .word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */ + .word USART6_IRQHandler /* USART6 */ + .word I2C3_EV_IRQHandler /* I2C3 event */ + .word I2C3_ER_IRQHandler /* I2C3 error */ + .word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */ + .word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */ + .word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */ + .word OTG_HS_IRQHandler /* USB OTG HS */ + .word DCMI_IRQHandler /* DCMI */ + .word 0 /* CRYP crypto */ + .word HASH_RNG_IRQHandler /* Hash and Rng */ + .word FPU_IRQHandler /* FPU */ + .word UART7_IRQHandler /* UART7 */ + .word UART8_IRQHandler /* UART8 */ + .word SPI4_IRQHandler /* SPI4 */ + .word SPI5_IRQHandler /* SPI5 */ + .word SPI6_IRQHandler /* SPI6 */ + .word SAI1_IRQHandler /* SAI1 */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word DMA2D_IRQHandler /* DMA2D */ + .word SAI2_IRQHandler /* SAI2 */ + .word QUADSPI_IRQHandler /* QUADSPI */ + .word LPTIM1_IRQHandler /* LPTIM1 */ + .word CEC_IRQHandler /* HDMI_CEC */ + .word I2C4_EV_IRQHandler /* I2C4 Event */ + .word I2C4_ER_IRQHandler /* I2C4 Error */ + .word SPDIF_RX_IRQHandler /* SPDIF_RX */ + .word DSIHOST_IRQHandler /* DSI host */ + .word DFSDM1_FLT0_IRQHandler /* DFSDM1 filter 0 */ + .word DFSDM1_FLT1_IRQHandler /* DFSDM1 filter 1 */ + .word DFSDM1_FLT2_IRQHandler /* DFSDM1 filter 2 */ + .word DFSDM1_FLT3_IRQHandler /* DFSDM1 filter 3 */ + .word SDMMC2_IRQHandler /* SDMMC2 */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak TAMP_STAMP_IRQHandler + .thumb_set TAMP_STAMP_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Stream0_IRQHandler + .thumb_set DMA1_Stream0_IRQHandler,Default_Handler + + .weak DMA1_Stream1_IRQHandler + .thumb_set DMA1_Stream1_IRQHandler,Default_Handler + + .weak DMA1_Stream2_IRQHandler + .thumb_set DMA1_Stream2_IRQHandler,Default_Handler + + .weak DMA1_Stream3_IRQHandler + .thumb_set DMA1_Stream3_IRQHandler,Default_Handler + + .weak DMA1_Stream4_IRQHandler + .thumb_set DMA1_Stream4_IRQHandler,Default_Handler + + .weak DMA1_Stream5_IRQHandler + .thumb_set DMA1_Stream5_IRQHandler,Default_Handler + + .weak DMA1_Stream6_IRQHandler + .thumb_set DMA1_Stream6_IRQHandler,Default_Handler + + .weak ADC_IRQHandler + .thumb_set ADC_IRQHandler,Default_Handler + + .weak CAN1_TX_IRQHandler + .thumb_set CAN1_TX_IRQHandler,Default_Handler + + .weak CAN1_RX0_IRQHandler + .thumb_set CAN1_RX0_IRQHandler,Default_Handler + + .weak CAN1_RX1_IRQHandler + .thumb_set CAN1_RX1_IRQHandler,Default_Handler + + .weak CAN1_SCE_IRQHandler + .thumb_set CAN1_SCE_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_TIM9_IRQHandler + .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler + + .weak TIM1_UP_TIM10_IRQHandler + .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_TIM11_IRQHandler + .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM4_IRQHandler + .thumb_set TIM4_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C2_EV_IRQHandler + .thumb_set I2C2_EV_IRQHandler,Default_Handler + + .weak I2C2_ER_IRQHandler + .thumb_set I2C2_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_IRQHandler + .thumb_set USART3_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak OTG_FS_WKUP_IRQHandler + .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler + + .weak TIM8_BRK_TIM12_IRQHandler + .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler + + .weak TIM8_UP_TIM13_IRQHandler + .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler + + .weak TIM8_TRG_COM_TIM14_IRQHandler + .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler + + .weak TIM8_CC_IRQHandler + .thumb_set TIM8_CC_IRQHandler,Default_Handler + + .weak DMA1_Stream7_IRQHandler + .thumb_set DMA1_Stream7_IRQHandler,Default_Handler + + .weak FMC_IRQHandler + .thumb_set FMC_IRQHandler,Default_Handler + + .weak SDMMC1_IRQHandler + .thumb_set SDMMC1_IRQHandler,Default_Handler + + .weak TIM5_IRQHandler + .thumb_set TIM5_IRQHandler,Default_Handler + + .weak SPI3_IRQHandler + .thumb_set SPI3_IRQHandler,Default_Handler + + .weak UART4_IRQHandler + .thumb_set UART4_IRQHandler,Default_Handler + + .weak UART5_IRQHandler + .thumb_set UART5_IRQHandler,Default_Handler + + .weak TIM6_DAC_IRQHandler + .thumb_set TIM6_DAC_IRQHandler,Default_Handler + + .weak TIM7_IRQHandler + .thumb_set TIM7_IRQHandler,Default_Handler + + .weak DMA2_Stream0_IRQHandler + .thumb_set DMA2_Stream0_IRQHandler,Default_Handler + + .weak DMA2_Stream1_IRQHandler + .thumb_set DMA2_Stream1_IRQHandler,Default_Handler + + .weak DMA2_Stream2_IRQHandler + .thumb_set DMA2_Stream2_IRQHandler,Default_Handler + + .weak DMA2_Stream3_IRQHandler + .thumb_set DMA2_Stream3_IRQHandler,Default_Handler + + .weak DMA2_Stream4_IRQHandler + .thumb_set DMA2_Stream4_IRQHandler,Default_Handler + + .weak ETH_IRQHandler + .thumb_set ETH_IRQHandler,Default_Handler + + .weak ETH_WKUP_IRQHandler + .thumb_set ETH_WKUP_IRQHandler,Default_Handler + + .weak CAN2_TX_IRQHandler + .thumb_set CAN2_TX_IRQHandler,Default_Handler + + .weak CAN2_RX0_IRQHandler + .thumb_set CAN2_RX0_IRQHandler,Default_Handler + + .weak CAN2_RX1_IRQHandler + .thumb_set CAN2_RX1_IRQHandler,Default_Handler + + .weak CAN2_SCE_IRQHandler + .thumb_set CAN2_SCE_IRQHandler,Default_Handler + + .weak OTG_FS_IRQHandler + .thumb_set OTG_FS_IRQHandler,Default_Handler + + .weak DMA2_Stream5_IRQHandler + .thumb_set DMA2_Stream5_IRQHandler,Default_Handler + + .weak DMA2_Stream6_IRQHandler + .thumb_set DMA2_Stream6_IRQHandler,Default_Handler + + .weak DMA2_Stream7_IRQHandler + .thumb_set DMA2_Stream7_IRQHandler,Default_Handler + + .weak USART6_IRQHandler + .thumb_set USART6_IRQHandler,Default_Handler + + .weak I2C3_EV_IRQHandler + .thumb_set I2C3_EV_IRQHandler,Default_Handler + + .weak I2C3_ER_IRQHandler + .thumb_set I2C3_ER_IRQHandler,Default_Handler + + .weak OTG_HS_EP1_OUT_IRQHandler + .thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler + + .weak OTG_HS_EP1_IN_IRQHandler + .thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler + + .weak OTG_HS_WKUP_IRQHandler + .thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler + + .weak OTG_HS_IRQHandler + .thumb_set OTG_HS_IRQHandler,Default_Handler + + .weak DCMI_IRQHandler + .thumb_set DCMI_IRQHandler,Default_Handler + + .weak HASH_RNG_IRQHandler + .thumb_set HASH_RNG_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler + + .weak UART7_IRQHandler + .thumb_set UART7_IRQHandler,Default_Handler + + .weak UART8_IRQHandler + .thumb_set UART8_IRQHandler,Default_Handler + + .weak SPI4_IRQHandler + .thumb_set SPI4_IRQHandler,Default_Handler + + .weak SPI5_IRQHandler + .thumb_set SPI5_IRQHandler,Default_Handler + + .weak SPI6_IRQHandler + .thumb_set SPI6_IRQHandler,Default_Handler + + .weak SAI1_IRQHandler + .thumb_set SAI1_IRQHandler,Default_Handler + + .weak DMA2D_IRQHandler + .thumb_set DMA2D_IRQHandler,Default_Handler + + .weak SAI2_IRQHandler + .thumb_set SAI2_IRQHandler,Default_Handler + + .weak QUADSPI_IRQHandler + .thumb_set QUADSPI_IRQHandler,Default_Handler + + .weak LPTIM1_IRQHandler + .thumb_set LPTIM1_IRQHandler,Default_Handler + + .weak CEC_IRQHandler + .thumb_set CEC_IRQHandler,Default_Handler + + .weak I2C4_EV_IRQHandler + .thumb_set I2C4_EV_IRQHandler,Default_Handler + + .weak I2C4_ER_IRQHandler + .thumb_set I2C4_ER_IRQHandler,Default_Handler + + .weak SPDIF_RX_IRQHandler + .thumb_set SPDIF_RX_IRQHandler,Default_Handler + + .weak DSIHOST_IRQHandler + .thumb_set DSIHOST_IRQHandler,Default_Handler + + .weak DFSDM1_FLT0_IRQHandler + .thumb_set DFSDM1_FLT0_IRQHandler,Default_Handler + + .weak DFSDM1_FLT1_IRQHandler + .thumb_set DFSDM1_FLT1_IRQHandler,Default_Handler + + .weak DFSDM1_FLT2_IRQHandler + .thumb_set DFSDM1_FLT2_IRQHandler,Default_Handler + + .weak DFSDM1_FLT3_IRQHandler + .thumb_set DFSDM1_FLT3_IRQHandler,Default_Handler + + .weak SDMMC2_IRQHandler + .thumb_set SDMMC2_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/ports/stm32/boards/startup_stm32h7.s b/ports/stm32/boards/startup_stm32h7.s new file mode 100644 index 000000000..53d46205f --- /dev/null +++ b/ports/stm32/boards/startup_stm32h7.s @@ -0,0 +1,763 @@ +/** + ****************************************************************************** + * @file startup_stm32h743xx.s + * @author MCD Application Team + * @version V1.2.0 + * @date 29-December-2017 + * @brief STM32H743xx Devices vector table for GCC based toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2017 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m7 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss +/* stack used for SystemInit_ExtMemCtl; always internal RAM used */ + +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr sp, =_estack /* set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2], #4 + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ +/* bl __libc_init_array */ +/* Call the application's entry point.*/ + bl main + bx lr +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * @param None + * @retval None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +*******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + /* External Interrupts */ + .word WWDG_IRQHandler /* Window WatchDog */ + .word PVD_AVD_IRQHandler /* PVD/AVD through EXTI Line detection */ + .word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */ + .word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */ + .word FLASH_IRQHandler /* FLASH */ + .word RCC_IRQHandler /* RCC */ + .word EXTI0_IRQHandler /* EXTI Line0 */ + .word EXTI1_IRQHandler /* EXTI Line1 */ + .word EXTI2_IRQHandler /* EXTI Line2 */ + .word EXTI3_IRQHandler /* EXTI Line3 */ + .word EXTI4_IRQHandler /* EXTI Line4 */ + .word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */ + .word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */ + .word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */ + .word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */ + .word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */ + .word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */ + .word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */ + .word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */ + .word FDCAN1_IT0_IRQHandler /* FDCAN1 interrupt line 0 */ + .word FDCAN2_IT0_IRQHandler /* FDCAN2 interrupt line 0 */ + .word FDCAN1_IT1_IRQHandler /* FDCAN1 interrupt line 1 */ + .word FDCAN2_IT1_IRQHandler /* FDCAN2 interrupt line 1 */ + .word EXTI9_5_IRQHandler /* External Line[9:5]s */ + .word TIM1_BRK_IRQHandler /* TIM1 Break interrupt */ + .word TIM1_UP_IRQHandler /* TIM1 Update interrupt */ + .word TIM1_TRG_COM_IRQHandler /* TIM1 Trigger and Commutation interrupt */ + .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .word TIM2_IRQHandler /* TIM2 */ + .word TIM3_IRQHandler /* TIM3 */ + .word TIM4_IRQHandler /* TIM4 */ + .word I2C1_EV_IRQHandler /* I2C1 Event */ + .word I2C1_ER_IRQHandler /* I2C1 Error */ + .word I2C2_EV_IRQHandler /* I2C2 Event */ + .word I2C2_ER_IRQHandler /* I2C2 Error */ + .word SPI1_IRQHandler /* SPI1 */ + .word SPI2_IRQHandler /* SPI2 */ + .word USART1_IRQHandler /* USART1 */ + .word USART2_IRQHandler /* USART2 */ + .word USART3_IRQHandler /* USART3 */ + .word EXTI15_10_IRQHandler /* External Line[15:10]s */ + .word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */ + .word 0 /* Reserved */ + .word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */ + .word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */ + .word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */ + .word TIM8_CC_IRQHandler /* TIM8 Capture Compare */ + .word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */ + .word FMC_IRQHandler /* FMC */ + .word SDMMC1_IRQHandler /* SDMMC1 */ + .word TIM5_IRQHandler /* TIM5 */ + .word SPI3_IRQHandler /* SPI3 */ + .word UART4_IRQHandler /* UART4 */ + .word UART5_IRQHandler /* UART5 */ + .word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */ + .word TIM7_IRQHandler /* TIM7 */ + .word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */ + .word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */ + .word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */ + .word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */ + .word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */ + .word ETH_IRQHandler /* Ethernet */ + .word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */ + .word FDCAN_CAL_IRQHandler /* FDCAN calibration unit interrupt*/ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */ + .word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */ + .word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */ + .word USART6_IRQHandler /* USART6 */ + .word I2C3_EV_IRQHandler /* I2C3 event */ + .word I2C3_ER_IRQHandler /* I2C3 error */ + .word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */ + .word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */ + .word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */ + .word OTG_HS_IRQHandler /* USB OTG HS */ + .word DCMI_IRQHandler /* DCMI */ + .word 0 /* Reserved */ + .word RNG_IRQHandler /* Rng */ + .word FPU_IRQHandler /* FPU */ + .word UART7_IRQHandler /* UART7 */ + .word UART8_IRQHandler /* UART8 */ + .word SPI4_IRQHandler /* SPI4 */ + .word SPI5_IRQHandler /* SPI5 */ + .word SPI6_IRQHandler /* SPI6 */ + .word SAI1_IRQHandler /* SAI1 */ + .word LTDC_IRQHandler /* LTDC */ + .word LTDC_ER_IRQHandler /* LTDC error */ + .word DMA2D_IRQHandler /* DMA2D */ + .word SAI2_IRQHandler /* SAI2 */ + .word QUADSPI_IRQHandler /* QUADSPI */ + .word LPTIM1_IRQHandler /* LPTIM1 */ + .word CEC_IRQHandler /* HDMI_CEC */ + .word I2C4_EV_IRQHandler /* I2C4 Event */ + .word I2C4_ER_IRQHandler /* I2C4 Error */ + .word SPDIF_RX_IRQHandler /* SPDIF_RX */ + .word OTG_FS_EP1_OUT_IRQHandler /* USB OTG FS End Point 1 Out */ + .word OTG_FS_EP1_IN_IRQHandler /* USB OTG FS End Point 1 In */ + .word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI */ + .word OTG_FS_IRQHandler /* USB OTG FS */ + .word DMAMUX1_OVR_IRQHandler /* DMAMUX1 Overrun interrupt */ + .word HRTIM1_Master_IRQHandler /* HRTIM Master Timer global Interrupt */ + .word HRTIM1_TIMA_IRQHandler /* HRTIM Timer A global Interrupt */ + .word HRTIM1_TIMB_IRQHandler /* HRTIM Timer B global Interrupt */ + .word HRTIM1_TIMC_IRQHandler /* HRTIM Timer C global Interrupt */ + .word HRTIM1_TIMD_IRQHandler /* HRTIM Timer D global Interrupt */ + .word HRTIM1_TIME_IRQHandler /* HRTIM Timer E global Interrupt */ + .word HRTIM1_FLT_IRQHandler /* HRTIM Fault global Interrupt */ + .word DFSDM1_FLT0_IRQHandler /* DFSDM Filter0 Interrupt */ + .word DFSDM1_FLT1_IRQHandler /* DFSDM Filter1 Interrupt */ + .word DFSDM1_FLT2_IRQHandler /* DFSDM Filter2 Interrupt */ + .word DFSDM1_FLT3_IRQHandler /* DFSDM Filter3 Interrupt */ + .word SAI3_IRQHandler /* SAI3 global Interrupt */ + .word SWPMI1_IRQHandler /* Serial Wire Interface 1 global interrupt */ + .word TIM15_IRQHandler /* TIM15 global Interrupt */ + .word TIM16_IRQHandler /* TIM16 global Interrupt */ + .word TIM17_IRQHandler /* TIM17 global Interrupt */ + .word MDIOS_WKUP_IRQHandler /* MDIOS Wakeup Interrupt */ + .word MDIOS_IRQHandler /* MDIOS global Interrupt */ + .word JPEG_IRQHandler /* JPEG global Interrupt */ + .word MDMA_IRQHandler /* MDMA global Interrupt */ + .word 0 /* Reserved */ + .word SDMMC2_IRQHandler /* SDMMC2 global Interrupt */ + .word HSEM1_IRQHandler /* HSEM1 global Interrupt */ + .word 0 /* Reserved */ + .word ADC3_IRQHandler /* ADC3 global Interrupt */ + .word DMAMUX2_OVR_IRQHandler /* DMAMUX Overrun interrupt */ + .word BDMA_Channel0_IRQHandler /* BDMA Channel 0 global Interrupt */ + .word BDMA_Channel1_IRQHandler /* BDMA Channel 1 global Interrupt */ + .word BDMA_Channel2_IRQHandler /* BDMA Channel 2 global Interrupt */ + .word BDMA_Channel3_IRQHandler /* BDMA Channel 3 global Interrupt */ + .word BDMA_Channel4_IRQHandler /* BDMA Channel 4 global Interrupt */ + .word BDMA_Channel5_IRQHandler /* BDMA Channel 5 global Interrupt */ + .word BDMA_Channel6_IRQHandler /* BDMA Channel 6 global Interrupt */ + .word BDMA_Channel7_IRQHandler /* BDMA Channel 7 global Interrupt */ + .word COMP1_IRQHandler /* COMP1 global Interrupt */ + .word LPTIM2_IRQHandler /* LP TIM2 global interrupt */ + .word LPTIM3_IRQHandler /* LP TIM3 global interrupt */ + .word LPTIM4_IRQHandler /* LP TIM4 global interrupt */ + .word LPTIM5_IRQHandler /* LP TIM5 global interrupt */ + .word LPUART1_IRQHandler /* LP UART1 interrupt */ + .word 0 /* Reserved */ + .word CRS_IRQHandler /* Clock Recovery Global Interrupt */ + .word 0 /* Reserved */ + .word SAI4_IRQHandler /* SAI4 global interrupt */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word WAKEUP_PIN_IRQHandler /* Interrupt for all 6 wake-up pins */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_AVD_IRQHandler + .thumb_set PVD_AVD_IRQHandler,Default_Handler + + .weak TAMP_STAMP_IRQHandler + .thumb_set TAMP_STAMP_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Stream0_IRQHandler + .thumb_set DMA1_Stream0_IRQHandler,Default_Handler + + .weak DMA1_Stream1_IRQHandler + .thumb_set DMA1_Stream1_IRQHandler,Default_Handler + + .weak DMA1_Stream2_IRQHandler + .thumb_set DMA1_Stream2_IRQHandler,Default_Handler + + .weak DMA1_Stream3_IRQHandler + .thumb_set DMA1_Stream3_IRQHandler,Default_Handler + + .weak DMA1_Stream4_IRQHandler + .thumb_set DMA1_Stream4_IRQHandler,Default_Handler + + .weak DMA1_Stream5_IRQHandler + .thumb_set DMA1_Stream5_IRQHandler,Default_Handler + + .weak DMA1_Stream6_IRQHandler + .thumb_set DMA1_Stream6_IRQHandler,Default_Handler + + .weak ADC_IRQHandler + .thumb_set ADC_IRQHandler,Default_Handler + + .weak FDCAN1_IT0_IRQHandler + .thumb_set FDCAN1_IT0_IRQHandler,Default_Handler + + .weak FDCAN2_IT0_IRQHandler + .thumb_set FDCAN2_IT0_IRQHandler,Default_Handler + + .weak FDCAN1_IT1_IRQHandler + .thumb_set FDCAN1_IT1_IRQHandler,Default_Handler + + .weak FDCAN2_IT1_IRQHandler + .thumb_set FDCAN2_IT1_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_IRQHandler + .thumb_set TIM1_BRK_IRQHandler,Default_Handler + + .weak TIM1_UP_IRQHandler + .thumb_set TIM1_UP_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_IRQHandler + .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM4_IRQHandler + .thumb_set TIM4_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C2_EV_IRQHandler + .thumb_set I2C2_EV_IRQHandler,Default_Handler + + .weak I2C2_ER_IRQHandler + .thumb_set I2C2_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_IRQHandler + .thumb_set USART3_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak TIM8_BRK_TIM12_IRQHandler + .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler + + .weak TIM8_UP_TIM13_IRQHandler + .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler + + .weak TIM8_TRG_COM_TIM14_IRQHandler + .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler + + .weak TIM8_CC_IRQHandler + .thumb_set TIM8_CC_IRQHandler,Default_Handler + + .weak DMA1_Stream7_IRQHandler + .thumb_set DMA1_Stream7_IRQHandler,Default_Handler + + .weak FMC_IRQHandler + .thumb_set FMC_IRQHandler,Default_Handler + + .weak SDMMC1_IRQHandler + .thumb_set SDMMC1_IRQHandler,Default_Handler + + .weak TIM5_IRQHandler + .thumb_set TIM5_IRQHandler,Default_Handler + + .weak SPI3_IRQHandler + .thumb_set SPI3_IRQHandler,Default_Handler + + .weak UART4_IRQHandler + .thumb_set UART4_IRQHandler,Default_Handler + + .weak UART5_IRQHandler + .thumb_set UART5_IRQHandler,Default_Handler + + .weak TIM6_DAC_IRQHandler + .thumb_set TIM6_DAC_IRQHandler,Default_Handler + + .weak TIM7_IRQHandler + .thumb_set TIM7_IRQHandler,Default_Handler + + .weak DMA2_Stream0_IRQHandler + .thumb_set DMA2_Stream0_IRQHandler,Default_Handler + + .weak DMA2_Stream1_IRQHandler + .thumb_set DMA2_Stream1_IRQHandler,Default_Handler + + .weak DMA2_Stream2_IRQHandler + .thumb_set DMA2_Stream2_IRQHandler,Default_Handler + + .weak DMA2_Stream3_IRQHandler + .thumb_set DMA2_Stream3_IRQHandler,Default_Handler + + .weak DMA2_Stream4_IRQHandler + .thumb_set DMA2_Stream4_IRQHandler,Default_Handler + + .weak ETH_IRQHandler + .thumb_set ETH_IRQHandler,Default_Handler + + .weak ETH_WKUP_IRQHandler + .thumb_set ETH_WKUP_IRQHandler,Default_Handler + + .weak FDCAN_CAL_IRQHandler + .thumb_set FDCAN_CAL_IRQHandler,Default_Handler + + .weak DMA2_Stream5_IRQHandler + .thumb_set DMA2_Stream5_IRQHandler,Default_Handler + + .weak DMA2_Stream6_IRQHandler + .thumb_set DMA2_Stream6_IRQHandler,Default_Handler + + .weak DMA2_Stream7_IRQHandler + .thumb_set DMA2_Stream7_IRQHandler,Default_Handler + + .weak USART6_IRQHandler + .thumb_set USART6_IRQHandler,Default_Handler + + .weak I2C3_EV_IRQHandler + .thumb_set I2C3_EV_IRQHandler,Default_Handler + + .weak I2C3_ER_IRQHandler + .thumb_set I2C3_ER_IRQHandler,Default_Handler + + .weak OTG_HS_EP1_OUT_IRQHandler + .thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler + + .weak OTG_HS_EP1_IN_IRQHandler + .thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler + + .weak OTG_HS_WKUP_IRQHandler + .thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler + + .weak OTG_HS_IRQHandler + .thumb_set OTG_HS_IRQHandler,Default_Handler + + .weak DCMI_IRQHandler + .thumb_set DCMI_IRQHandler,Default_Handler + + .weak RNG_IRQHandler + .thumb_set RNG_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler + + .weak UART7_IRQHandler + .thumb_set UART7_IRQHandler,Default_Handler + + .weak UART8_IRQHandler + .thumb_set UART8_IRQHandler,Default_Handler + + .weak SPI4_IRQHandler + .thumb_set SPI4_IRQHandler,Default_Handler + + .weak SPI5_IRQHandler + .thumb_set SPI5_IRQHandler,Default_Handler + + .weak SPI6_IRQHandler + .thumb_set SPI6_IRQHandler,Default_Handler + + .weak SAI1_IRQHandler + .thumb_set SAI1_IRQHandler,Default_Handler + + .weak LTDC_IRQHandler + .thumb_set LTDC_IRQHandler,Default_Handler + + .weak LTDC_ER_IRQHandler + .thumb_set LTDC_ER_IRQHandler,Default_Handler + + .weak DMA2D_IRQHandler + .thumb_set DMA2D_IRQHandler,Default_Handler + + .weak SAI2_IRQHandler + .thumb_set SAI2_IRQHandler,Default_Handler + + .weak QUADSPI_IRQHandler + .thumb_set QUADSPI_IRQHandler,Default_Handler + + .weak LPTIM1_IRQHandler + .thumb_set LPTIM1_IRQHandler,Default_Handler + + .weak CEC_IRQHandler + .thumb_set CEC_IRQHandler,Default_Handler + + .weak I2C4_EV_IRQHandler + .thumb_set I2C4_EV_IRQHandler,Default_Handler + + .weak I2C4_ER_IRQHandler + .thumb_set I2C4_ER_IRQHandler,Default_Handler + + .weak SPDIF_RX_IRQHandler + .thumb_set SPDIF_RX_IRQHandler,Default_Handler + + .weak OTG_FS_EP1_OUT_IRQHandler + .thumb_set OTG_FS_EP1_OUT_IRQHandler,Default_Handler + + .weak OTG_FS_EP1_IN_IRQHandler + .thumb_set OTG_FS_EP1_IN_IRQHandler,Default_Handler + + .weak OTG_FS_WKUP_IRQHandler + .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler + + .weak OTG_FS_IRQHandler + .thumb_set OTG_FS_IRQHandler,Default_Handler + + .weak DMAMUX1_OVR_IRQHandler + .thumb_set DMAMUX1_OVR_IRQHandler,Default_Handler + + .weak HRTIM1_Master_IRQHandler + .thumb_set HRTIM1_Master_IRQHandler,Default_Handler + + .weak HRTIM1_TIMA_IRQHandler + .thumb_set HRTIM1_TIMA_IRQHandler,Default_Handler + + .weak HRTIM1_TIMB_IRQHandler + .thumb_set HRTIM1_TIMB_IRQHandler,Default_Handler + + .weak HRTIM1_TIMC_IRQHandler + .thumb_set HRTIM1_TIMC_IRQHandler,Default_Handler + + .weak HRTIM1_TIMD_IRQHandler + .thumb_set HRTIM1_TIMD_IRQHandler,Default_Handler + + .weak HRTIM1_TIME_IRQHandler + .thumb_set HRTIM1_TIME_IRQHandler,Default_Handler + + .weak HRTIM1_FLT_IRQHandler + .thumb_set HRTIM1_FLT_IRQHandler,Default_Handler + + .weak DFSDM1_FLT0_IRQHandler + .thumb_set DFSDM1_FLT0_IRQHandler,Default_Handler + + .weak DFSDM1_FLT1_IRQHandler + .thumb_set DFSDM1_FLT1_IRQHandler,Default_Handler + + .weak DFSDM1_FLT2_IRQHandler + .thumb_set DFSDM1_FLT2_IRQHandler,Default_Handler + + .weak DFSDM1_FLT3_IRQHandler + .thumb_set DFSDM1_FLT3_IRQHandler,Default_Handler + + .weak SAI3_IRQHandler + .thumb_set SAI3_IRQHandler,Default_Handler + + .weak SWPMI1_IRQHandler + .thumb_set SWPMI1_IRQHandler,Default_Handler + + .weak TIM15_IRQHandler + .thumb_set TIM15_IRQHandler,Default_Handler + + .weak TIM16_IRQHandler + .thumb_set TIM16_IRQHandler,Default_Handler + + .weak TIM17_IRQHandler + .thumb_set TIM17_IRQHandler,Default_Handler + + .weak MDIOS_WKUP_IRQHandler + .thumb_set MDIOS_WKUP_IRQHandler,Default_Handler + + .weak MDIOS_IRQHandler + .thumb_set MDIOS_IRQHandler,Default_Handler + + .weak JPEG_IRQHandler + .thumb_set JPEG_IRQHandler,Default_Handler + + .weak MDMA_IRQHandler + .thumb_set MDMA_IRQHandler,Default_Handler + + .weak SDMMC2_IRQHandler + .thumb_set SDMMC2_IRQHandler,Default_Handler + + .weak HSEM1_IRQHandler + .thumb_set HSEM1_IRQHandler,Default_Handler + + .weak ADC3_IRQHandler + .thumb_set ADC3_IRQHandler,Default_Handler + + .weak DMAMUX2_OVR_IRQHandler + .thumb_set DMAMUX2_OVR_IRQHandler,Default_Handler + + .weak BDMA_Channel0_IRQHandler + .thumb_set BDMA_Channel0_IRQHandler,Default_Handler + + .weak BDMA_Channel1_IRQHandler + .thumb_set BDMA_Channel1_IRQHandler,Default_Handler + + .weak BDMA_Channel2_IRQHandler + .thumb_set BDMA_Channel2_IRQHandler,Default_Handler + + .weak BDMA_Channel3_IRQHandler + .thumb_set BDMA_Channel3_IRQHandler,Default_Handler + + .weak BDMA_Channel4_IRQHandler + .thumb_set BDMA_Channel4_IRQHandler,Default_Handler + + .weak BDMA_Channel5_IRQHandler + .thumb_set BDMA_Channel5_IRQHandler,Default_Handler + + .weak BDMA_Channel6_IRQHandler + .thumb_set BDMA_Channel6_IRQHandler,Default_Handler + + .weak BDMA_Channel7_IRQHandler + .thumb_set BDMA_Channel7_IRQHandler,Default_Handler + + .weak COMP1_IRQHandler + .thumb_set COMP1_IRQHandler,Default_Handler + + .weak LPTIM2_IRQHandler + .thumb_set LPTIM2_IRQHandler,Default_Handler + + .weak LPTIM3_IRQHandler + .thumb_set LPTIM3_IRQHandler,Default_Handler + + .weak LPTIM4_IRQHandler + .thumb_set LPTIM4_IRQHandler,Default_Handler + + .weak LPTIM5_IRQHandler + .thumb_set LPTIM5_IRQHandler,Default_Handler + + .weak LPUART1_IRQHandler + .thumb_set LPUART1_IRQHandler,Default_Handler + + .weak CRS_IRQHandler + .thumb_set CRS_IRQHandler,Default_Handler + + .weak SAI4_IRQHandler + .thumb_set SAI4_IRQHandler,Default_Handler + + .weak WAKEUP_PIN_IRQHandler + .thumb_set WAKEUP_PIN_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/ports/stm32/boards/startup_stm32l4.s b/ports/stm32/boards/startup_stm32l4.s new file mode 100644 index 000000000..3225723ff --- /dev/null +++ b/ports/stm32/boards/startup_stm32l4.s @@ -0,0 +1,549 @@ +/** + ****************************************************************************** + * @file startup_stm32l496xx.s + * @author MCD Application Team + * @brief STM32L496xx devices vector table GCC toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address, + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M4 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + * Taken from STM32L4 template code for stm32l496 in STM32Cube_FW_L4_V1.11.0 + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2017 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m4 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss +/* stack used for SystemInit_ExtMemCtl; always internal RAM used */ + +.equ BootRAM, 0xF1E0F85F +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr sp, =_estack /* set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2], #4 + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system initialization function.*/ + bl SystemInit +/* Call static constructors */ + /*bl __libc_init_array*/ +/* Call the application's entry point.*/ + bl main + bx lr +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex-M4. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +*******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + /* External Interrupts */ + .word WWDG_IRQHandler /* Window WatchDog */ + .word PVD_PVM_IRQHandler /* PVD and PVM through EXTI line detection */ + .word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */ + .word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */ + .word FLASH_IRQHandler /* FLASH */ + .word RCC_IRQHandler /* RCC */ + .word EXTI0_IRQHandler /* EXTI Line0 */ + .word EXTI1_IRQHandler /* EXTI Line1 */ + .word EXTI2_IRQHandler /* EXTI Line2 */ + .word EXTI3_IRQHandler /* EXTI Line3 */ + .word EXTI4_IRQHandler /* EXTI Line4 */ + .word DMA1_Channel1_IRQHandler /* DMA1 Channel 1 */ + .word DMA1_Channel2_IRQHandler /* DMA1 Channel 2 */ + .word DMA1_Channel3_IRQHandler /* DMA1 Channel 3 */ + .word DMA1_Channel4_IRQHandler /* DMA1 Channel 4 */ + .word DMA1_Channel5_IRQHandler /* DMA1 Channel 5 */ + .word DMA1_Channel6_IRQHandler /* DMA1 Channel 6 */ + .word DMA1_Channel7_IRQHandler /* DMA1 Channel 7 */ + .word ADC1_2_IRQHandler /* ADC1 and ADC2 */ + .word CAN1_TX_IRQHandler /* CAN1 TX */ + .word CAN1_RX0_IRQHandler /* CAN1 RX0 */ + .word CAN1_RX1_IRQHandler /* CAN1 RX1 */ + .word CAN1_SCE_IRQHandler /* CAN1 SCE */ + .word EXTI9_5_IRQHandler /* External Line[9:5]s */ + .word TIM1_BRK_TIM15_IRQHandler /* TIM1 Break and TIM15 */ + .word TIM1_UP_TIM16_IRQHandler /* TIM1 Update and TIM16 */ + .word TIM1_TRG_COM_TIM17_IRQHandler /* TIM1 Trigger and Commutation and TIM17 */ + .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .word TIM2_IRQHandler /* TIM2 */ + .word TIM3_IRQHandler /* TIM3 */ + .word TIM4_IRQHandler /* TIM4 */ + .word I2C1_EV_IRQHandler /* I2C1 Event */ + .word I2C1_ER_IRQHandler /* I2C1 Error */ + .word I2C2_EV_IRQHandler /* I2C2 Event */ + .word I2C2_ER_IRQHandler /* I2C2 Error */ + .word SPI1_IRQHandler /* SPI1 */ + .word SPI2_IRQHandler /* SPI2 */ + .word USART1_IRQHandler /* USART1 */ + .word USART2_IRQHandler /* USART2 */ + .word USART3_IRQHandler /* USART3 */ + .word EXTI15_10_IRQHandler /* External Line[15:10]s */ + .word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */ + .word DFSDM1_FLT3_IRQHandler /* Digital filter 3 for sigma delta modulator */ + .word TIM8_BRK_IRQHandler /* TIM8 Break */ + .word TIM8_UP_IRQHandler /* TIM8 Update */ + .word TIM8_TRG_COM_IRQHandler /* TIM8 Trigger and Commutation */ + .word TIM8_CC_IRQHandler /* TIM8 Capture Compare */ + .word ADC3_IRQHandler /* ADC3 global interrupt */ + .word FMC_IRQHandler /* FMC */ + .word SDMMC1_IRQHandler /* SDMMC1 */ + .word TIM5_IRQHandler /* TIM5 */ + .word SPI3_IRQHandler /* SPI3 */ + .word UART4_IRQHandler /* UART4 */ + .word UART5_IRQHandler /* UART5 */ + .word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */ + .word TIM7_IRQHandler /* TIM7 */ + .word DMA2_Channel1_IRQHandler /* DMA2 Channel 1 */ + .word DMA2_Channel2_IRQHandler /* DMA2 Channel 2 */ + .word DMA2_Channel3_IRQHandler /* DMA2 Channel 3 */ + .word DMA2_Channel4_IRQHandler /* DMA2 Channel 4 */ + .word DMA2_Channel5_IRQHandler /* DMA2 Channel 5 */ + .word DFSDM1_FLT0_IRQHandler /* Digital filter 0 for sigma delta modulator */ + .word DFSDM1_FLT1_IRQHandler /* Digital filter 1 for sigma delta modulator */ + .word DFSDM1_FLT2_IRQHandler /* Digital filter 2 for sigma delta modulator */ + .word COMP_IRQHandler /* Comporator thru EXTI line */ + .word LPTIM1_IRQHandler /* Low power timer 1 */ + .word LPTIM2_IRQHandler /* Low power timer 2 */ + .word OTG_FS_IRQHandler /* USB OTG FS */ + .word DMA2_Channel6_IRQHandler /* DMA2 Channel 6 */ + .word DMA2_Channel7_IRQHandler /* DMA2 Channel 7 */ + .word LPUART1_IRQHandler /* Low power UART */ + .word QUADSPI_IRQHandler /* Quad SPI */ + .word I2C3_EV_IRQHandler /* I2C3 event */ + .word I2C3_ER_IRQHandler /* I2C3 error */ + .word SAI1_IRQHandler /* Serial audio interface 1 */ + .word SAI2_IRQHandler /* Serial audio interface 2 */ + .word SWPMI1_IRQHandler /* Single wire protocole 1 */ + .word TSC_IRQHandler /* Touch sensig controller */ + .word LCD_IRQHandler /* LCD */ + .word 0 /* CRYP crypto */ + .word RNG_IRQHandler /* Random number generator */ + .word FPU_IRQHandler /* FPU */ + /* Following Handlers are only used on L496/4A6xx devices */ + .word CRS_IRQHandler /* HASH and CRS interrupt */ + .word I2C4_EV_IRQHandler /* I2C4 event interrupt */ + .word I2C4_ER_IRQHandler /* I2C4 error interrupt */ + .word DCMI_IRQHandler /* DCMI global interrupt */ + .word CAN2_TX_IRQHandler /* CAN2 TX interrupt */ + .word CAN2_RX0_IRQHandler /* CAN2 RX0 interrupt */ + .word CAN2_RX1_IRQHandler /* CAN2 RX1 interrupt */ + .word CAN2_SCE_IRQHandler /* CAN SCE interrupt */ + .word DMA2D_IRQHandler /* DMA2D global interrupt */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_PVM_IRQHandler + .thumb_set PVD_PVM_IRQHandler,Default_Handler + + .weak TAMP_STAMP_IRQHandler + .thumb_set TAMP_STAMP_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_IRQHandler + .thumb_set DMA1_Channel2_IRQHandler,Default_Handler + + .weak DMA1_Channel3_IRQHandler + .thumb_set DMA1_Channel3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_IRQHandler + .thumb_set DMA1_Channel4_IRQHandler,Default_Handler + + .weak DMA1_Channel5_IRQHandler + .thumb_set DMA1_Channel5_IRQHandler,Default_Handler + + .weak DMA1_Channel6_IRQHandler + .thumb_set DMA1_Channel6_IRQHandler,Default_Handler + + .weak DMA1_Channel7_IRQHandler + .thumb_set DMA1_Channel7_IRQHandler,Default_Handler + + .weak ADC1_2_IRQHandler + .thumb_set ADC1_2_IRQHandler,Default_Handler + + .weak CAN1_TX_IRQHandler + .thumb_set CAN1_TX_IRQHandler,Default_Handler + + .weak CAN1_RX0_IRQHandler + .thumb_set CAN1_RX0_IRQHandler,Default_Handler + + .weak CAN1_RX1_IRQHandler + .thumb_set CAN1_RX1_IRQHandler,Default_Handler + + .weak CAN1_SCE_IRQHandler + .thumb_set CAN1_SCE_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_TIM15_IRQHandler + .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler + + .weak TIM1_UP_TIM16_IRQHandler + .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_TIM17_IRQHandler + .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM4_IRQHandler + .thumb_set TIM4_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C2_EV_IRQHandler + .thumb_set I2C2_EV_IRQHandler,Default_Handler + + .weak I2C2_ER_IRQHandler + .thumb_set I2C2_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_IRQHandler + .thumb_set USART3_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak DFSDM1_FLT3_IRQHandler + .thumb_set DFSDM1_FLT3_IRQHandler,Default_Handler + + .weak TIM8_BRK_IRQHandler + .thumb_set TIM8_BRK_IRQHandler,Default_Handler + + .weak TIM8_UP_IRQHandler + .thumb_set TIM8_UP_IRQHandler,Default_Handler + + .weak TIM8_TRG_COM_IRQHandler + .thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler + + .weak TIM8_CC_IRQHandler + .thumb_set TIM8_CC_IRQHandler,Default_Handler + + .weak ADC3_IRQHandler + .thumb_set ADC3_IRQHandler,Default_Handler + + .weak FMC_IRQHandler + .thumb_set FMC_IRQHandler,Default_Handler + + .weak SDMMC1_IRQHandler + .thumb_set SDMMC1_IRQHandler,Default_Handler + + .weak TIM5_IRQHandler + .thumb_set TIM5_IRQHandler,Default_Handler + + .weak SPI3_IRQHandler + .thumb_set SPI3_IRQHandler,Default_Handler + + .weak UART4_IRQHandler + .thumb_set UART4_IRQHandler,Default_Handler + + .weak UART5_IRQHandler + .thumb_set UART5_IRQHandler,Default_Handler + + .weak TIM6_DAC_IRQHandler + .thumb_set TIM6_DAC_IRQHandler,Default_Handler + + .weak TIM7_IRQHandler + .thumb_set TIM7_IRQHandler,Default_Handler + + .weak DMA2_Channel1_IRQHandler + .thumb_set DMA2_Channel1_IRQHandler,Default_Handler + + .weak DMA2_Channel2_IRQHandler + .thumb_set DMA2_Channel2_IRQHandler,Default_Handler + + .weak DMA2_Channel3_IRQHandler + .thumb_set DMA2_Channel3_IRQHandler,Default_Handler + + .weak DMA2_Channel4_IRQHandler + .thumb_set DMA2_Channel4_IRQHandler,Default_Handler + + .weak DMA2_Channel5_IRQHandler + .thumb_set DMA2_Channel5_IRQHandler,Default_Handler + + .weak DFSDM1_FLT0_IRQHandler + .thumb_set DFSDM1_FLT0_IRQHandler,Default_Handler + + .weak DFSDM1_FLT1_IRQHandler + .thumb_set DFSDM1_FLT1_IRQHandler,Default_Handler + + .weak DFSDM1_FLT2_IRQHandler + .thumb_set DFSDM1_FLT2_IRQHandler,Default_Handler + + .weak COMP_IRQHandler + .thumb_set COMP_IRQHandler,Default_Handler + + .weak LPTIM1_IRQHandler + .thumb_set LPTIM1_IRQHandler,Default_Handler + + .weak LPTIM2_IRQHandler + .thumb_set LPTIM2_IRQHandler,Default_Handler + + .weak OTG_FS_IRQHandler + .thumb_set OTG_FS_IRQHandler,Default_Handler + + .weak DMA2_Channel6_IRQHandler + .thumb_set DMA2_Channel6_IRQHandler,Default_Handler + + .weak DMA2_Channel7_IRQHandler + .thumb_set DMA2_Channel7_IRQHandler,Default_Handler + + .weak LPUART1_IRQHandler + .thumb_set LPUART1_IRQHandler,Default_Handler + + .weak QUADSPI_IRQHandler + .thumb_set QUADSPI_IRQHandler,Default_Handler + + .weak I2C3_EV_IRQHandler + .thumb_set I2C3_EV_IRQHandler,Default_Handler + + .weak I2C3_ER_IRQHandler + .thumb_set I2C3_ER_IRQHandler,Default_Handler + + .weak SAI1_IRQHandler + .thumb_set SAI1_IRQHandler,Default_Handler + + .weak SAI2_IRQHandler + .thumb_set SAI2_IRQHandler,Default_Handler + + .weak SWPMI1_IRQHandler + .thumb_set SWPMI1_IRQHandler,Default_Handler + + .weak TSC_IRQHandler + .thumb_set TSC_IRQHandler,Default_Handler + + .weak LCD_IRQHandler + .thumb_set LCD_IRQHandler,Default_Handler + + .weak RNG_IRQHandler + .thumb_set RNG_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler + + .weak CRS_IRQHandler + .thumb_set CRS_IRQHandler,Default_Handler + + .weak I2C4_EV_IRQHandler + .thumb_set I2C4_EV_IRQHandler,Default_Handler + + .weak I2C4_ER_IRQHandler + .thumb_set I2C4_ER_IRQHandler,Default_Handler + + .weak DCMI_IRQHandler + .thumb_set DCMI_IRQHandler,Default_Handler + + .weak CAN2_TX_IRQHandler + .thumb_set CAN2_TX_IRQHandler,Default_Handler + + .weak CAN2_RX0_IRQHandler + .thumb_set CAN2_RX0_IRQHandler,Default_Handler + + .weak CAN2_RX1_IRQHandler + .thumb_set CAN2_RX1_IRQHandler,Default_Handler + + .weak CAN2_SCE_IRQHandler + .thumb_set CAN2_SCE_IRQHandler,Default_Handler + + .weak DMA2D_IRQHandler + .thumb_set DMA2D_IRQHandler,Default_Handler +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/ports/stm32/boards/stm32f091_af.csv b/ports/stm32/boards/stm32f091_af.csv new file mode 100644 index 000000000..38e134f8a --- /dev/null +++ b/ports/stm32/boards/stm32f091_af.csv @@ -0,0 +1,89 @@ +Port,Pin,AF0,AF1,AF2,AF3,AF4,AF5,AF6,AF7,,,,,,,,, +,,AF0,AF1,AF2,AF3,AF4,AF5,AF6,AF7,,,,,,,,,ADC +PortA,PA0,,USART2_CTS,TIM2_CH1_ETR,TSC_G1_IO1,USART4_TX,,,COMP1_OUT,,,,,,,,,ADC1_IN0 +PortA,PA1,EVENTOUT,USART2_RTS,TIM2_CH2,TSC_G1_IO2,USART4_RX,TIM15_CH1N,,,,,,,,,,,ADC1_IN1 +PortA,PA2,TIM15_CH1,USART2_TX,TIM2_CH3,TSC_G1_IO3,,,,COMP2_OUT,,,,,,,,,ADC1_IN2 +PortA,PA3,TIM15_CH2,USART2_RX,TIM2_CH4,TSC_G1_IO4,,,,,,,,,,,,,ADC1_IN3 +PortA,PA4,SPI1_NSS/I2S1_WS,USART2_CK,,TSC_G2_IO1,TIM14_CH1,USART6_TX,,,,,,,,,,,ADC1_IN4 +PortA,PA5,SPI1_SCK/I2S1_CK,CEC,TIM2_CH1_ETR,TSC_G2_IO2,,USART6_RX,,,,,,,,,,,ADC1_IN5 +PortA,PA6,SPI1_MISO/I2S1_MCK,TIM3_CH1,TIM1_BKIN,TSC_G2_IO3,USART3_CTS,TIM16_CH1,EVENTOUT,COMP1_OUT,,,,,,,,,ADC1_IN6 +PortA,PA7,SPI1_MOSI/I2S1_SD,TIM3_CH2,TIM1_CH1N,TSC_G2_IO4,TIM14_CH1,TIM17_CH1,EVENTOUT,COMP2_OUT,,,,,,,,,ADC1_IN7 +PortA,PA8,MCO,USART1_CK,TIM1_CH1,EVENTOUT,CRS_SYNC,,,,,,,,,,,, +PortA,PA9,TIM15_BKIN,USART1_TX,TIM1_CH2,TSC_G4_IO1,I2C1_SCL,MCO,,,,,,,,,,, +PortA,PA10,TIM17_BKIN,USART1_RX,TIM1_CH3,TSC_G4_IO2,I2C1_SDA,,,,,,,,,,,, +PortA,PA11,EVENTOUT,USART1_CTS,TIM1_CH4,TSC_G4_IO3,CAN1_RX,I2C2_SCL,,COMP1_OUT,,,,,,,,, +PortA,PA12,EVENTOUT,USART1_RTS,TIM1_ETR,TSC_G4_IO4,CAN1_TX,I2C2_SDA,,COMP2_OUT,,,,,,,,, +PortA,PA13,SWDIO,IR_OUT,,,,,,,,,,,,,,, +PortA,PA14,SWCLK,USART2_TX,,,,,,,,,,,,,,, +PortA,PA15,SPI1_NSS/I2S1_WS,USART2_RX,TIM2_CH1_ETR,EVENTOUT,USART4_RTS,,,,,,,,,,,, +PortB,PB0,EVENTOUT,TIM3_CH3,TIM1_CH2N,TSC_G3_IO2,USART3_CK,,,,,,,,,,,,ADC1_IN8 +PortB,PB1,TIM14_CH1,TIM3_CH4,TIM1_CH3N,TSC_G3_IO3,USART3_RTS,,,,,,,,,,,,ADC1_IN9 +PortB,PB2,,,,TSC_G3_IO4,,,,,,,,,,,,, +PortB,PB3,SPI1_SCK/I2S1_CK,EVENTOUT,TIM2_CH2,TSC_G5_IO1,USART5_TX,,,,,,,,,, +PortB,PB4,SPI1_MISO/I2S1_MCK,TIM3_CH1,EVENTOUT,TSC_G5_IO2,USART5_RX,TIM17_BKIN,,,,,,,,, +PortB,PB5,SPI1_MOSI/I2S1_SD,TIM3_CH2,TIM16_BKIN,I2C1_SMBA,USART5_CK/USART5_RTS,,,,,,,,,, +PortB,PB6,USART1_TX,I2C1_SCL,TIM16_CH1N,TSC_G5_IO3,,,,,,,,,,, +PortB,PB7,USART1_RX,I2C1_SDA,TIM17_CH1N,TSC_G5_IO4,USART4_CTS,,,,,,,,,, +PortB,PB8,CEC,I2C1_SCL,TIM16_CH1,TSC_SYNC,CAN1_RX,,,,,,,,,, +PortB,PB9,IR_OUT,I2C1_SDA,TIM17_CH1,EVENTOUT,CAN1_TX,SPI2_NSS/I2S2_WS,,,,,,,,, +PortB,PB10,CEC,I2C2_SCL,TIM2_CH3,TSC_SYNC,USART3_TX,SPI2_SCK/I2S2_CK,,,,,,,,, +PortB,PB11,EVENTOUT,I2C2_SDA,TIM2_CH4,TSC_G6_IO1,USART3_RX,,,,,,,,,, +PortB,PB12,SPI2_NSS/I2S2_WS,EVENTOUT,TIM1_BKIN,TSC_G6_IO2,USART3_CK,TIM15_BKIN,,,,,,,,, +PortB,PB13,SPI2_SCK/I2S2_CK,,TIM1_CH1N,TSC_G6_IO3,USART3_CTS,I2C2_SCL,,,,,,,,, +PortB,PB14,SPI2_MISO/I2S2_MCK,TIM15_CH1,TIM1_CH2N,TSC_G6_IO4,USART3_RTS,I2C2_SDA,,,,,,,,, +PortB,PB15,SPI2_MOSI/I2S2_SD,TIM15_CH2,TIM1_CH3N,TIM15_CH1N,,,,,,,,,,, +PortC,PC0,EVENTOUT,USART7_TX,USART6_TX,,,,,,,,,,,,,,ADC1_IN10 +PortC,PC1,EVENTOUT,USART7_RX,USART6_RX,,,,,,,,,,,,,,ADC1_IN11 +PortC,PC2,EVENTOUT,SPI2_MISO/I2S2_MCK,USART8_TX,,,,,,,,,,,,,,ADC1_IN12 +PortC,PC3,EVENTOUT,SPI2_MOSI/I2S2_SD,USART8_RX,,,,,,,,,,,,,,ADC1_IN13 +PortC,PC4,EVENTOUT,USART3_TX,,,,,,,,,,,,,,,ADC1_IN14 +PortC,PC5,TSC_G3_IO1,USART3_RX,,,,,,,,,,,,,,,ADC1_IN15 +PortC,PC6,TIM3_CH1,USART7_TX,,,,,,,,,,,,,,, +PortC,PC7,TIM3_CH2,USART7_RX,,,,,,,,,,,,,,, +PortC,PC8,TIM3_CH3,USART8_TX,,,,,,,,,,,,,,, +PortC,PC9,TIM3_CH4,USART8_RX,,,,,,,,,,,,,,, +PortC,PC10,USART4_TX,USART3_TX,,,,,,,,,,,,,,, +PortC,PC11,USART4_RX,USART3_RX,,,,,,,,,,,,,,, +PortC,PC12,USART4_CK,USART3_CK,USART5_TX,,,,,,,,,,,,,, +PortC,PC13,,,,,,,,,,,,,,,,, +PortC,PC14,,,,,,,,,,,,,,,,, +PortC,PC15,,,,,,,,,,,,,,,,, +PortD,PD0,CAN1_RX,SPI2_NSS/I2S2_WS,,,,,,,,,,,,,,, +PortD,PD1,CAN1_TX,SPI2_SCK/I2S2_CK,,,,,,,,,,,,,,, +PortD,PD2,TIM3_ETR,USART3_RTS,USART5_RX,,,,,,,,,,,,,, +PortD,PD3,USART2_CTS,SPI2_MISO/I2S2_MCK,,,,,,,,,,,,,,, +PortD,PD4,USART2_RTS,SPI2_MOSI/I2S2_SD,,,,,,,,,,,,,,, +PortD,PD5,USART2_TX,,,,,,,,,,,,,,,, +PortD,PD6,USART2_RX,,,,,,,,,,,,,,,, +PortD,PD7,USART2_CK,,,,,,,,,,,,,,,, +PortD,PD8,USART3_TX,,,,,,,,,,,,,,,, +PortD,PD9,USART3_RX,,,,,,,,,,,,,,,, +PortD,PD10,USART3_CK,,,,,,,,,,,,,,,, +PortD,PD11,USART3_CTS,,,,,,,,,,,,,,,, +PortD,PD12,USART3_RTS,TSC_G8_IO1,USART8_CK/USART8_RTS,,,,,,,,,,,,,, +PortD,PD13,USART8_TX,TSC_G8_IO2,,,,,,,,,,,,,,, +PortD,PD14,USART8_RX,TSC_G8_IO3,,,,,,,,,,,,,,, +PortD,PD15,CRS_SYNC,TSC_G8_IO4,USART7_CK/USART7_RTS,,,,,,,,,,,,,, +PortE,PE0,TIM16_CH1,EVENTOUT,,,,,,,,,,,,,,, +PortE,PE1,TIM17_CH1,EVENTOUT,,,,,,,,,,,,,,, +PortE,PE2,TIM3_ETR,TSC_G7_IO1,,,,,,,,,,,,,,, +PortE,PE3,TIM3_CH1,TSC_G7_IO2,,,,,,,,,,,,,,, +PortE,PE4,TIM3_CH2,TSC_G7_IO3,,,,,,,,,,,,,,, +PortE,PE5,TIM3_CH3,TSC_G7_IO4,,,,,,,,,,,,,,, +PortE,PE6,TIM3_CH4,,,,,,,,,,,,,,,, +PortE,PE7,TIM1_ETR,USART5_CK/USART5_RTS,,,,,,,,,,,,,,, +PortE,PE8,TIM1_CH1N,USART4_TX,,,,,,,,,,,,,,, +PortE,PE9,TIM1_CH1,USART4_RX,,,,,,,,,,,,,,, +PortE,PE10,TIM1_CH2N,USART5_TX,,,,,,,,,,,,,,, +PortE,PE11,TIM1_CH2,USART5_RX,,,,,,,,,,,,,,, +PortE,PE12,TIM1_CH3N,SPI1_NSS/I2S1_WS,,,,,,,,,,,,,,, +PortE,PE13,TIM1_CH3,SPI1_SCK/I2S1_CK,,,,,,,,,,,,,,, +PortE,PE14,TIM1_CH4,SPI1_MISO/I2S1_MCK,,,,,,,,,,,,,,, +PortE,PE15,TIM1_BKIN,SPI1_MOSI/I2S1_SD,,,,,,,,,,,,,,, +PortF,PF0,CRS_SYNC,I2C1_SDA,,,,,,,,,,,,,,, +PortF,PF1,,I2C1_SCL,,,,,,,,,,,,,,, +PortF,PF2,EVENTOUT,USART7_TX,USART7_CK/USART7_RTS,,,,,,,,,,,,,, +PortF,PF3,EVENTOUT,USART7_RX,USART6_CK/USART6_RTS,,,,,,,,,,,,,, +PortF,PF6,,,,,,,,,,,,,,,,, +PortF,PF9,TIM15_CH1,USART6_TX,,,,,,,,,,,,,,, +PortF,PF10,TIM15_CH2,USART6_RX,,,,,,,,,,,,,,, diff --git a/ports/stm32/boards/stm32f091xc.ld b/ports/stm32/boards/stm32f091xc.ld new file mode 100644 index 000000000..73b844295 --- /dev/null +++ b/ports/stm32/boards/stm32f091xc.ld @@ -0,0 +1,26 @@ +/* + GNU linker script for STM32F091xC +*/ + +/* Specify the memory areas */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 256K + FLASH_TEXT (rx) : ORIGIN = 0x08000000, LENGTH = 256K + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 32K +} + +/* produce a link error if there is not this amount of RAM for these sections */ +_minimum_stack_size = 2K; +_minimum_heap_size = 16K; + +/* Define tho top end of the stack. The stack is full descending so begins just + above last byte of RAM. Note that EABI requires the stack to be 8-byte + aligned for a call. */ +_estack = ORIGIN(RAM) + LENGTH(RAM); + +/* RAM extents for the garbage collector */ +_ram_start = ORIGIN(RAM); +_ram_end = ORIGIN(RAM) + LENGTH(RAM); +_heap_start = _ebss; /* heap starts just after statically allocated memory */ +_heap_end = 0x20006800; /* room for a 6k stack */ diff --git a/ports/stm32/boards/stm32f401_af.csv b/ports/stm32/boards/stm32f401_af.csv index 3b29e1349..1acb8e431 100644 --- a/ports/stm32/boards/stm32f401_af.csv +++ b/ports/stm32/boards/stm32f401_af.csv @@ -13,13 +13,13 @@ PortA,PA9,,TIM1_CH2,,,I2C3_SMBA,,,USART1_TX,,,OTG_FS_VBUS,,,,,EVENTOUT, PortA,PA10,,TIM1_CH3,,,,,,USART1_RX,,,OTG_FS_ID,,,,,EVENTOUT, PortA,PA11,,TIM1_CH4,,,,,,USART1_CTS,USART6_TX,,OTG_FS_DM,,,,,EVENTOUT, PortA,PA12,,TIM1_ETR,,,,,,USART1_RTS,USART6_RX,,OTG_FS_DP,,,,,EVENTOUT, -PortA,PA13,JTMS_SWDIO,,,,,,,,,,,,,,,EVENTOUT, -PortA,PA14,JTCK_SWCLK,,,,,,,,,,,,,,,EVENTOUT, +PortA,PA13,JTMS/SWDIO,,,,,,,,,,,,,,,EVENTOUT, +PortA,PA14,JTCK/SWCLK,,,,,,,,,,,,,,,EVENTOUT, PortA,PA15,JTDI,TIM2_CH1/TIM2_ETR,,,,SPI1_NSS,SPI3_NSS/I2S3_WS,,,,,,,,,EVENTOUT, PortB,PB0,,TIM1_CH2N,TIM3_CH3,,,,,,,,,,,,,EVENTOUT,ADC1_IN8 PortB,PB1,,TIM1_CH3N,TIM3_CH4,,,,,,,,,,,,,EVENTOUT,ADC1_IN9 PortB,PB2,,,,,,,,,,,,,,,,EVENTOUT, -PortB,PB3,JTDO_SWO,TIM2_CH2,,,,SPI1_SCK,SPI3_SCK/I2S3_CK,,,I2C2_SDA,,,,,,EVENTOUT, +PortB,PB3,JTDO/TRACESWO,TIM2_CH2,,,,SPI1_SCK,SPI3_SCK/I2S3_CK,,,I2C2_SDA,,,,,,EVENTOUT, PortB,PB4,JTRST,,TIM3_CH1,,,SPI1_MISO,SPI3_MISO,I2S3ext_SD,,I2C3_SDA,,,,,,EVENTOUT, PortB,PB5,,,TIM3_CH2,,I2C1_SMBA,SPI1_MOSI,SPI3_MOSI/I2S3_SD,,,,,,,,,EVENTOUT, PortB,PB6,,,TIM4_CH1,,I2C1_SCL,,,USART1_TX,,,,,,,,EVENTOUT, diff --git a/ports/stm32/boards/stm32f401xd.ld b/ports/stm32/boards/stm32f401xd.ld index 89f605609..7c0e79018 100644 --- a/ports/stm32/boards/stm32f401xd.ld +++ b/ports/stm32/boards/stm32f401xd.ld @@ -21,9 +21,6 @@ _minimum_heap_size = 16K; aligned for a call. */ _estack = ORIGIN(RAM) + LENGTH(RAM); -/* define common sections and symbols */ -INCLUDE common.ld - /* RAM extents for the garbage collector */ _ram_start = ORIGIN(RAM); _ram_end = ORIGIN(RAM) + LENGTH(RAM); diff --git a/ports/stm32/boards/stm32f401xe.ld b/ports/stm32/boards/stm32f401xe.ld index ae2f89904..e76bbad1c 100644 --- a/ports/stm32/boards/stm32f401xe.ld +++ b/ports/stm32/boards/stm32f401xe.ld @@ -21,9 +21,6 @@ _minimum_heap_size = 16K; aligned for a call. */ _estack = ORIGIN(RAM) + LENGTH(RAM); -/* define common sections and symbols */ -INCLUDE common.ld - /* RAM extents for the garbage collector */ _ram_start = ORIGIN(RAM); _ram_end = ORIGIN(RAM) + LENGTH(RAM); diff --git a/ports/stm32/boards/stm32f405.ld b/ports/stm32/boards/stm32f405.ld index c6107913f..0375491f6 100644 --- a/ports/stm32/boards/stm32f405.ld +++ b/ports/stm32/boards/stm32f405.ld @@ -22,9 +22,6 @@ _minimum_heap_size = 16K; aligned for a call. */ _estack = ORIGIN(RAM) + LENGTH(RAM); -/* define common sections and symbols */ -INCLUDE common.ld - /* RAM extents for the garbage collector */ _ram_start = ORIGIN(RAM); _ram_end = ORIGIN(RAM) + LENGTH(RAM); diff --git a/ports/stm32/boards/stm32f405_af.csv b/ports/stm32/boards/stm32f405_af.csv index 81f5e80ed..e6d8fcc2b 100644 --- a/ports/stm32/boards/stm32f405_af.csv +++ b/ports/stm32/boards/stm32f405_af.csv @@ -13,8 +13,8 @@ PortA,PA9,,TIM1_CH2,,,I2C3_SMBA,,,USART1_TX,,,,,,DCMI_D0,,EVENTOUT, PortA,PA10,,TIM1_CH3,,,,,,USART1_RX,,,OTG_FS_ID,,,DCMI_D1,,EVENTOUT, PortA,PA11,,TIM1_CH4,,,,,,USART1_CTS,,CAN1_RX,OTG_FS_DM,,,,,EVENTOUT, PortA,PA12,,TIM1_ETR,,,,,,USART1_RTS,,CAN1_TX,OTG_FS_DP,,,,,EVENTOUT, -PortA,PA13,JTMS-SWDIO,,,,,,,,,,,,,,,EVENTOUT, -PortA,PA14,JTCK-SWCLK,,,,,,,,,,,,,,,EVENTOUT, +PortA,PA13,JTMS/SWDIO,,,,,,,,,,,,,,,EVENTOUT, +PortA,PA14,JTCK/SWCLK,,,,,,,,,,,,,,,EVENTOUT, PortA,PA15,JTDI,TIM2_CH1/TIM2_ETR,,,,SPI1_NSS,SPI3_NSS/I2S3_WS,,,,,,,,,EVENTOUT, PortB,PB0,,TIM1_CH2N,TIM3_CH3,TIM8_CH2N,,,,,,,OTG_HS_ULPI_D1,ETH_MII_RXD2,,,,EVENTOUT,ADC12_IN8 PortB,PB1,,TIM1_CH3N,TIM3_CH4,TIM8_CH3N,,,,,,,OTG_HS_ULPI_D2,ETH_MII_RXD3,,,,EVENTOUT,ADC12_IN9 diff --git a/ports/stm32/boards/stm32f411.ld b/ports/stm32/boards/stm32f411.ld index 7adfa35c9..9e3e6bc15 100644 --- a/ports/stm32/boards/stm32f411.ld +++ b/ports/stm32/boards/stm32f411.ld @@ -21,9 +21,6 @@ _minimum_heap_size = 16K; aligned for a call. */ _estack = ORIGIN(RAM) + LENGTH(RAM); -/* define common sections and symbols */ -INCLUDE common.ld - /* RAM extents for the garbage collector */ _ram_start = ORIGIN(RAM); _ram_end = ORIGIN(RAM) + LENGTH(RAM); diff --git a/ports/stm32/boards/stm32f411_af.csv b/ports/stm32/boards/stm32f411_af.csv index 29267b1d9..d5b7a61de 100644 --- a/ports/stm32/boards/stm32f411_af.csv +++ b/ports/stm32/boards/stm32f411_af.csv @@ -13,13 +13,13 @@ PortA,PA9,,TIM1_CH2,,,I2C3_SMBA,,,USART1_TX,,,USB_FS_VBUS,,SDIO_D2,,,EVENTOUT, PortA,PA10,,TIM1_CH3,,,,,SPI5_MOSI/I2S5_SD,USART1_RX,,,USB_FS_ID,,,,,EVENTOUT, PortA,PA11,,TIM1_CH4,,,,,SPI4_MISO,USART1_CTS,USART6_TX,,USB_FS_DM,,,,,EVENTOUT, PortA,PA12,,TIM1_ETR,,,,,SPI5_MISO,USART1_RTS,USART6_RX,,USB_FS_DP,,,,,EVENTOUT, -PortA,PA13,JTMS-SWDIO,,,,,,,,,,,,,,,EVENTOUT, -PortA,PA14,JTCK-SWCLK,,,,,,,,,,,,,,,EVENTOUT, +PortA,PA13,JTMS/SWDIO,,,,,,,,,,,,,,,EVENTOUT, +PortA,PA14,JTCK/SWCLK,,,,,,,,,,,,,,,EVENTOUT, PortA,PA15,JTDI,TIM2_CH1/TIM2_ETR,,,,SPI1_NSS/I2S1_WS,SPI3_NSS/I2S3_WS,USART1_TX,,,,,,,,EVENTOUT, PortB,PB0,,TIM1_CH2N,TIM3_CH3,,,,SPI5_SCK/I2S5_CK,,,,,,,,,EVENTOUT,ADC1_IN8 PortB,PB1,,TIM1_CH3N,TIM3_CH4,,,,SPI5_NSS/I2S5_WS,,,,,,,,,EVENTOUT,ADC1_IN9 PortB,PB2,,,,,,,,,,,,,,,,EVENTOUT, -PortB,PB3,JTDO-SWO,TIM2_CH2,,,,SPI1_SCK/I2S1_CK,SPI3_SCK/I2S3_CK,USART1_RX,,I2C2_SDA,,,,,,EVENTOUT, +PortB,PB3,JTDO/TRACESWO,TIM2_CH2,,,,SPI1_SCK/I2S1_CK,SPI3_SCK/I2S3_CK,USART1_RX,,I2C2_SDA,,,,,,EVENTOUT, PortB,PB4,JTRST,,TIM3_CH1,,,SPI1_MISO,SPI3_MISO,I2S3ext_SD,,I2C3_SDA,,,SDIO_D0,,,EVENTOUT, PortB,PB5,,,TIM3_CH2,,I2C1_SMBA,SPI1_MOSI/I2S1_SD,SPI3_MOSI/I2S3_SD,,,,,,SDIO_D3,,,EVENTOUT, PortB,PB6,,,TIM4_CH1,,I2C1_SCL,,,USART1_TX,,,,,,,,EVENTOUT, diff --git a/ports/stm32/boards/stm32f429.ld b/ports/stm32/boards/stm32f429.ld index a0931684d..d80f7f541 100644 --- a/ports/stm32/boards/stm32f429.ld +++ b/ports/stm32/boards/stm32f429.ld @@ -22,9 +22,6 @@ _minimum_heap_size = 16K; aligned for a call. */ _estack = ORIGIN(RAM) + LENGTH(RAM); -/* define common sections and symbols */ -INCLUDE common.ld - /* RAM extents for the garbage collector */ _ram_start = ORIGIN(RAM); _ram_end = ORIGIN(RAM) + LENGTH(RAM); diff --git a/ports/stm32/boards/stm32f429_af.csv b/ports/stm32/boards/stm32f429_af.csv index 2e501ade0..4ee8edd70 100644 --- a/ports/stm32/boards/stm32f429_af.csv +++ b/ports/stm32/boards/stm32f429_af.csv @@ -13,8 +13,8 @@ PortA,PA9,,TIM1_CH2,,,I2C3_SMBA,,,USART1_TX,,,,,,DCMI_D0,,EVENTOUT, PortA,PA10,,TIM1_CH3,,,,,,USART1_RX,,,OTG_FS_ID,,,DCMI_D1,,EVENTOUT, PortA,PA11,,TIM1_CH4,,,,,,USART1_CTS,,CAN1_RX,OTG_FS_DM,,,,LCD_R4,EVENTOUT, PortA,PA12,,TIM1_ETR,,,,,,USART1_RTS,,CAN1_TX,OTG_FS_DP,,,,LCD_R5,EVENTOUT, -PortA,PA13,JTMS-SWDIO,,,,,,,,,,,,,,,EVENTOUT, -PortA,PA14,JTCK-SWCLK,,,,,,,,,,,,,,,EVENTOUT, +PortA,PA13,JTMS/SWDIO,,,,,,,,,,,,,,,EVENTOUT, +PortA,PA14,JTCK/SWCLK,,,,,,,,,,,,,,,EVENTOUT, PortA,PA15,JTDI,TIM2_CH1/TIM2_ETR,,,,SPI1_NSS,SPI3_NSS/I2S3_WS,,,,,,,,,EVENTOUT, PortB,PB0,,TIM1_CH2N,TIM3_CH3,TIM8_CH2N,,,,,,LCD_R3,OTG_HS_ULPI_D1,ETH_MII_RXD2,,,,EVENTOUT,ADC12_IN8 PortB,PB1,,TIM1_CH3N,TIM3_CH4,TIM8_CH3N,,,,,,LCD_R6,OTG_HS_ULPI_D2,ETH_MII_RXD3,,,,EVENTOUT,ADC12_IN9 diff --git a/ports/stm32/boards/stm32f439.ld b/ports/stm32/boards/stm32f439.ld index a76a0ebc7..16c606ecc 100644 --- a/ports/stm32/boards/stm32f439.ld +++ b/ports/stm32/boards/stm32f439.ld @@ -21,9 +21,6 @@ _minimum_heap_size = 16K; /* top end of the stack */ _estack = ORIGIN(RAM) + LENGTH(RAM); -/* define common sections and symbols */ -INCLUDE common.ld - /* RAM extents for the garbage collector */ _ram_start = ORIGIN(RAM); _ram_end = ORIGIN(RAM) + LENGTH(RAM); diff --git a/ports/stm32/boards/stm32f439_af.csv b/ports/stm32/boards/stm32f439_af.csv index 5d5c3e72d..4fc1f1116 100644 --- a/ports/stm32/boards/stm32f439_af.csv +++ b/ports/stm32/boards/stm32f439_af.csv @@ -13,8 +13,8 @@ PortA,PA9,,TIM1_CH2,,,I2C3_SMBA,,,USART1_TX,,,,,,DCMI_D0,,EVENTOUT, PortA,PA10,,TIM1_CH3,,,,,,USART1_RX,,,OTG_FS_ID,,,DCMI_D1,,EVENTOUT, PortA,PA11,,TIM1_CH4,,,,,,USART1_CTS,,CAN1_RX,OTG_FS_DM,,,,LCD_R4,EVENTOUT, PortA,PA12,,TIM1_ETR,,,,,,USART1_RTS,,CAN1_TX,OTG_FS_DP,,,,LCD_R5,EVENTOUT, -PortA,PA13,JTMS-SWDIO,,,,,,,,,,,,,,,EVENTOUT, -PortA,PA14,JTCK-SWCLK,,,,,,,,,,,,,,,EVENTOUT, +PortA,PA13,JTMS/SWDIO,,,,,,,,,,,,,,,EVENTOUT, +PortA,PA14,JTCK/SWCLK,,,,,,,,,,,,,,,EVENTOUT, PortA,PA15,JTDI,TIM2_CH1/TIM2_ETR,,,,SPI1_NSS,SPI3_NSS/I2S3_WS,,,,,,,,,EVENTOUT, PortB,PB0,,TIM1_CH2N,TIM3_CH3,TIM8_CH2N,,,,,,LCD_R3,OTG_HS_ULPI_D1,ETH_MII_RXD2,,,,EVENTOUT,ADC12_IN8 PortB,PB1,,TIM1_CH3N,TIM3_CH4,TIM8_CH3N,,,,,,LCD_R6,OTG_HS_ULPI_D2,ETH_MII_RXD3,,,,EVENTOUT,ADC12_IN9 @@ -64,15 +64,15 @@ PortD,PD12,,,TIM4_CH1,,,,,USART3_RTS,,,,,FMC_A17,,,EVENTOUT, PortD,PD13,,,TIM4_CH2,,,,,,,,,,FMC_A18,,,EVENTOUT, PortD,PD14,,,TIM4_CH3,,,,,,,,,,FMC_D0,,,EVENTOUT, PortD,PD15,,,TIM4_CH4,,,,,,,,,,FMC_D1,,,EVENTOUT, -PortE,PE0,,,TIM4_ETR,,,,,,UART8_Rx,,,,FMC_NBL0,DCMI_D2,,EVENTOUT, -PortE,PE1,,,,,,,,,UART8_Tx,,,,FMC_NBL1,DCMI_D3,,EVENTOUT, +PortE,PE0,,,TIM4_ETR,,,,,,UART8_RX,,,,FMC_NBL0,DCMI_D2,,EVENTOUT, +PortE,PE1,,,,,,,,,UART8_TX,,,,FMC_NBL1,DCMI_D3,,EVENTOUT, PortE,PE2,TRACECLK,,,,,SPI4_SCK,SAI1_MCLK_A,,,,,ETH_MII_TXD3,FMC_A23,,,EVENTOUT, PortE,PE3,TRACED0,,,,,,SAI1_SD_B,,,,,,FMC_A19,,,EVENTOUT, PortE,PE4,TRACED1,,,,,SPI4_NSS,SAI1_FS_A,,,,,,FMC_A20,DCMI_D4,LCD_B0,EVENTOUT, PortE,PE5,TRACED2,,,TIM9_CH1,,SPI4_MISO,SAI1_SCK_A,,,,,,FMC_A21,DCMI_D6,LCD_G0,EVENTOUT, PortE,PE6,TRACED3,,,TIM9_CH2,,SPI4_MOSI,SAI1_SD_A,,,,,,FMC_A22,DCMI_D7,LCD_G1,EVENTOUT, -PortE,PE7,,TIM1_ETR,,,,,,,UART7_Rx,,,,FMC_D4,,,EVENTOUT, -PortE,PE8,,TIM1_CH1N,,,,,,,UART7_Tx,,,,FMC_D5,,,EVENTOUT, +PortE,PE7,,TIM1_ETR,,,,,,,UART7_RX,,,,FMC_D4,,,EVENTOUT, +PortE,PE8,,TIM1_CH1N,,,,,,,UART7_TX,,,,FMC_D5,,,EVENTOUT, PortE,PE9,,TIM1_CH1,,,,,,,,,,,FMC_D6,,,EVENTOUT, PortE,PE10,,TIM1_CH2N,,,,,,,,,,,FMC_D7,,,EVENTOUT, PortE,PE11,,TIM1_CH2,,,,SPI4_NSS,SPI3_NSS,,,,,,FMC_D8,,LCD_G3,EVENTOUT, @@ -86,8 +86,8 @@ PortF,PF2,,,,,I2C2_SMBA,,,,,,,,FMC_A2,,,EVENTOUT, PortF,PF3,,,,,,,,,,,,,FMC_A3,,,EVENTOUT,ADC3_IN9 PortF,PF4,,,,,,,,,,,,,FMC_A4,,,EVENTOUT,ADC3_IN14 PortF,PF5,,,,,,,,,,,,,FMC_A5,,,EVENTOUT,ADC3_IN15 -PortF,PF6,,,,TIM10_CH1,,SPI5_NSS,SAI1_SD_B,,UART7_Rx,,,,FMC_NIORD,,,EVENTOUT,ADC3_IN4 -PortF,PF7,,,,TIM11_CH1,,SPI5_SCK,SAI1_MCLK_B,,UART7_Tx,,,,FMC_NREG,,,EVENTOUT,ADC3_IN5 +PortF,PF6,,,,TIM10_CH1,,SPI5_NSS,SAI1_SD_B,,UART7_RX,,,,FMC_NIORD,,,EVENTOUT,ADC3_IN4 +PortF,PF7,,,,TIM11_CH1,,SPI5_SCK,SAI1_MCLK_B,,UART7_TX,,,,FMC_NREG,,,EVENTOUT,ADC3_IN5 PortF,PF8,,,,,,SPI5_MISO,SAI1_SCK_B,,,TIM13_CH1,,,FMC_NIOWR,,,EVENTOUT,ADC3_IN6 PortF,PF9,,,,,,SPI5_MOSI,SAI1_FS_B,,,TIM14_CH1,,,FMC_CD,,,EVENTOUT,ADC3_IN7 PortF,PF10,,,,,,,,,,,,,FMC_INTR,DCMI_D11,LCD_DE,EVENTOUT,ADC3_IN8 diff --git a/ports/stm32/boards/stm32f4xx_prefix.c b/ports/stm32/boards/stm32f4xx_prefix.c index f4ffdab68..3bcd6e641 100644 --- a/ports/stm32/boards/stm32f4xx_prefix.c +++ b/ports/stm32/boards/stm32f4xx_prefix.c @@ -14,7 +14,7 @@ .fn = AF_FN_ ## af_fn, \ .unit = (af_unit), \ .type = AF_PIN_TYPE_ ## af_fn ## _ ## af_type, \ - .af_fn = (af_ptr) \ + .reg = (af_ptr) \ } #define PIN(p_port, p_pin, p_af, p_adc_num, p_adc_channel) \ diff --git a/ports/stm32/boards/stm32f722.ld b/ports/stm32/boards/stm32f722.ld new file mode 100644 index 000000000..f2a1d8511 --- /dev/null +++ b/ports/stm32/boards/stm32f722.ld @@ -0,0 +1,27 @@ +/* + GNU linker script for STM32F722, STM32F723, STM32F732, STM32F733 +*/ + +/* Specify the memory areas */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K + FLASH_ISR (rx) : ORIGIN = 0x08000000, LENGTH = 32K /* sectors 0,1 */ + FLASH_APP (rx) : ORIGIN = 0x08008000, LENGTH = 480K /* sectors 2-7 */ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 256K /* DTCM+SRAM1+SRAM2 */ +} + +/* produce a link error if there is not this amount of RAM for these sections */ +_minimum_stack_size = 2K; +_minimum_heap_size = 16K; + +/* Define tho top end of the stack. The stack is full descending so begins just + above last byte of RAM. Note that EABI requires the stack to be 8-byte + aligned for a call. */ +_estack = ORIGIN(RAM) + LENGTH(RAM); + +/* RAM extents for the garbage collector */ +_ram_start = ORIGIN(RAM); +_ram_end = ORIGIN(RAM) + LENGTH(RAM); +_heap_start = _ebss; /* heap starts just after statically allocated memory */ +_heap_end = 0x20038000; /* tunable */ diff --git a/ports/stm32/boards/stm32f722_af.csv b/ports/stm32/boards/stm32f722_af.csv new file mode 100644 index 000000000..24500f505 --- /dev/null +++ b/ports/stm32/boards/stm32f722_af.csv @@ -0,0 +1,146 @@ +Port,,AF0,AF1,AF2,AF3,AF4,AF5,AF6,AF7,AF8,AF9,AF10,AF11,AF12,AF13,AF14,AF15, +,,SYS,TIM1/2,TIM3/4/5,TIM8/9/10/11/LPTIM1,I2C1/2/3/USART1,SPI1/I2S1/SPI2/I2S2/SPI3/I2S3/SPI4/5,SPI2/I2S2/SPI3/I2S3/SPI3/I2S3/SAI1/UART4,SPI2/I2S2/SPI3/I2S3/USART1/2/3/UART5,SAI2/USART6/UART4/5/7/8/OTG1_FS,CAN1/TIM12/13/14/QUADSPI/FMC/OTG2_HS,SAI2/QUADSPI/SDMMC2/OTG2_HS/OTG1_FS,SDMMC2,UART7/FMC/SDMMC1/OTG2_FS,,,SYS,ADC +PortA,PA0,,TIM2_CH1/TIM2_ETR,TIM5_CH1,TIM8_ETR,,,,USART2_CTS,UART4_TX,,SAI2_SD_B,,,,,EVENTOUT,ADC123_IN0 +PortA,PA1,,TIM2_CH2,TIM5_CH2,,,,,USART2_RTS,UART4_RX,QUADSPI_BK1_IO3,SAI2_MCK_B,,,,,EVENTOUT,ADC123_IN1 +PortA,PA2,,TIM2_CH3,TIM5_CH3,TIM9_CH1,,,,USART2_TX,SAI2_SCK_B,,,,,,,EVENTOUT,ADC123_IN2 +PortA,PA3,,TIM2_CH4,TIM5_CH4,TIM9_CH2,,,,USART2_RX,,,OTG_HS_ULPI_D0,,,,,EVENTOUT,ADC123_IN3 +PortA,PA4,,,,,,SPI1_NSS/I2S1_WS,SPI3_NSS/I2S3_WS,USART2_CK,,,,,OTG_HS_SOF,,,EVENTOUT,ADC12_IN4 +PortA,PA5,,TIM2_CH1/TIM2_ETR,,TIM8_CH1N,,SPI1_SCK/I2S1_CK,,,,,OTG_HS_ULPI_CK,,,,,EVENTOUT,ADC12_IN5 +PortA,PA6,,TIM1_BKIN,TIM3_CH1,TIM8_BKIN,,SPI1_MISO,,,,TIM13_CH1,,,,,,EVENTOUT,ADC12_IN6 +PortA,PA7,,TIM1_CH1N,TIM3_CH2,TIM8_CH1N,,SPI1_MOSI/I2S1_SD,,,,TIM14_CH1,,,FMC_SDNWE,,,EVENTOUT,ADC12_IN7 +PortA,PA8,MCO1,TIM1_CH1,,TIM8_BKIN2,I2C3_SCL,,,USART1_CK,,,OTG_FS_SOF,,,,,EVENTOUT, +PortA,PA9,,TIM1_CH2,,,I2C3_SMBA,SPI2_SCK/I2S2_CK,,USART1_TX,,,,,,,,EVENTOUT, +PortA,PA10,,TIM1_CH3,,,,,,USART1_RX,,,OTG_FS_ID,,,,,EVENTOUT, +PortA,PA11,,TIM1_CH4,,,,,,USART1_CTS,,CAN1_RX,OTG_FS_DM,,,,,EVENTOUT, +PortA,PA12,,TIM1_ETR,,,,,,USART1_RTS,SAI2_FS_B,CAN1_TX,OTG_FS_DP,,,,,EVENTOUT, +PortA,PA13,JTMS/SWDIO,,,,,,,,,,,,,,,EVENTOUT, +PortA,PA14,JTCK/SWCLK,,,,,,,,,,,,,,,EVENTOUT, +PortA,PA15,JTDI,TIM2_CH1/TIM2_ETR,,,,SPI1_NSS/I2S1_WS,SPI3_NSS/I2S3_WS,,UART4_RTS,,,,,,,EVENTOUT, +PortB,PB0,,TIM1_CH2N,TIM3_CH3,TIM8_CH2N,,,,,UART4_CTS,,OTG_HS_ULPI_D1,,,,,EVENTOUT,ADC12_IN8 +PortB,PB1,,TIM1_CH3N,TIM3_CH4,TIM8_CH3N,,,,,,,OTG_HS_ULPI_D2,,,,,EVENTOUT,ADC12_IN9 +PortB,PB2,,,,,,,SAI1_SD_A,SPI3_MOSI/I2S3_SD,,QUADSPI_CLK,,,,,,EVENTOUT, +PortB,PB3,JTDO/TRACESWO,TIM2_CH2,,,,SPI1_SCK/I2S1_CK,SPI3_SCK/I2S3_CK,,,,SDMMC2_D2,,,,,EVENTOUT, +PortB,PB4,NJTRST,,TIM3_CH1,,,SPI1_MISO,SPI3_MISO,SPI2_NSS/I2S2_WS,,,SDMMC2_D3,,,,,EVENTOUT, +PortB,PB5,,,TIM3_CH2,,I2C1_SMBA,SPI1_MOSI/I2S1_SD,SPI3_MOSI/I2S3_SD,,,,OTG_HS_ULPI_D7,,FMC_SDCKE1,,,EVENTOUT, +PortB,PB6,,,TIM4_CH1,,I2C1_SCL,,,USART1_TX,,,QUADSPI_BK1_NCS,,FMC_SDNE1,,,EVENTOUT, +PortB,PB7,,,TIM4_CH2,,I2C1_SDA,,,USART1_RX,,,,,FMC_NL,,,EVENTOUT, +PortB,PB8,,,TIM4_CH3,TIM10_CH1,I2C1_SCL,,,,,CAN1_RX,SDMMC2_D4,,SDMMC1_D4,,,EVENTOUT, +PortB,PB9,,,TIM4_CH4,TIM11_CH1,I2C1_SDA,SPI2_NSS/I2S2_WS,,,,CAN1_TX,SDMMC2_D5,,SDMMC1_D5,,,EVENTOUT, +PortB,PB10,,TIM2_CH3,,,I2C2_SCL,SPI2_SCK/I2S2_CK,,USART3_TX,,,OTG_HS_ULPI_D3,,,,,EVENTOUT, +PortB,PB11,,TIM2_CH4,,,I2C2_SDA,,,USART3_RX,,,OTG_HS_ULPI_D4,,,,,EVENTOUT, +PortB,PB12,,TIM1_BKIN,,,I2C2_SMBA,SPI2_NSS/I2S2_WS,,USART3_CK,,,OTG_HS_ULPI_D5,,OTG_HS_ID,,,EVENTOUT, +PortB,PB13,,TIM1_CH1N,,,,SPI2_SCK/I2S2_CK,,USART3_CTS,,,OTG_HS_ULPI_D6,,,,,EVENTOUT, +PortB,PB14,,TIM1_CH2N,,TIM8_CH2N,,SPI2_MISO,,USART3_RTS,,TIM12_CH1,SDMMC2_D0,,OTG_HS_DM,,,EVENTOUT, +PortB,PB15,RTC_REFIN,TIM1_CH3N,,TIM8_CH3N,,SPI2_MOSI/I2S2_SD,,,,TIM12_CH2,SDMMC2_D1,,OTG_HS_DP,,,EVENTOUT, +PortC,PC0,,,,,,,,,SAI2_FS_B,,OTG_HS_ULPI_STP,,FMC_SDNWE,,,EVENTOUT,ADC123_IN10 +PortC,PC1,TRACED0,,,,,SPI2_MOSI/I2S2_SD,SAI1_SD_A,,,,,,,,,EVENTOUT,ADC123_IN11 +PortC,PC2,,,,,,SPI2_MISO,,,,,OTG_HS_ULPI_DIR,,FMC_SDNE0,,,EVENTOUT,ADC123_IN12 +PortC,PC3,,,,,,SPI2_MOSI/I2S2_SD,,,,,OTG_HS_ULPI_NXT,,FMC_SDCKE0,,,EVENTOUT,ADC123_IN13 +PortC,PC4,,,,,,I2S1_MCK,,,,,,,FMC_SDNE0,,,EVENTOUT,ADC12_IN14 +PortC,PC5,,,,,,,,,,,,,FMC_SDCKE0,,,EVENTOUT,ADC12_IN15 +PortC,PC6,,,TIM3_CH1,TIM8_CH1,,I2S2_MCK,,,USART6_TX,,SDMMC2_D6,,SDMMC1_D6,,,EVENTOUT, +PortC,PC7,,,TIM3_CH2,TIM8_CH2,,,I2S3_MCK,,USART6_RX,,SDMMC2_D7,,SDMMC1_D7,,,EVENTOUT, +PortC,PC8,TRACED1,,TIM3_CH3,TIM8_CH3,,,,UART5_RTS,USART6_CK,,,,SDMMC1_D0,,,EVENTOUT, +PortC,PC9,MCO2,,TIM3_CH4,TIM8_CH4,I2C3_SDA,I2S_CKIN,,UART5_CTS,,QUADSPI_BK1_IO0,,,SDMMC1_D1,,,EVENTOUT, +PortC,PC10,,,,,,,SPI3_SCK/I2S3_CK,USART3_TX,UART4_TX,QUADSPI_BK1_IO1,,,SDMMC1_D2,,,EVENTOUT, +PortC,PC11,,,,,,,SPI3_MISO,USART3_RX,UART4_RX,QUADSPI_BK2_NCS,,,SDMMC1_D3,,,EVENTOUT, +PortC,PC12,TRACED3,,,,,,SPI3_MOSI/I2S3_SD,USART3_CK,UART5_TX,,,,SDMMC1_CK,,,EVENTOUT, +PortC,PC13,,,,,,,,,,,,,,,,EVENTOUT, +PortC,PC14,,,,,,,,,,,,,,,,EVENTOUT, +PortC,PC15,,,,,,,,,,,,,,,,EVENTOUT, +PortD,PD0,,,,,,,,,,CAN1_RX,,,FMC_D2,,,EVENTOUT, +PortD,PD1,,,,,,,,,,CAN1_TX,,,FMC_D3,,,EVENTOUT, +PortD,PD2,TRACED2,,TIM3_ETR,,,,,,UART5_RX,,,,SDMMC1_CMD,,,EVENTOUT, +PortD,PD3,,,,,,SPI2_SCK/I2S2_CK,,USART2_CTS,,,,,FMC_CLK,,,EVENTOUT, +PortD,PD4,,,,,,,,USART2_RTS,,,,,FMC_NOE,,,EVENTOUT, +PortD,PD5,,,,,,,,USART2_TX,,,,,FMC_NWE,,,EVENTOUT, +PortD,PD6,,,,,,SPI3_MOSI/I2S3_SD,SAI1_SD_A,USART2_RX,,,,SDMMC2_CK,FMC_NWAIT,,,EVENTOUT, +PortD,PD7,,,,,,,,USART2_CK,,,,SDMMC2_CMD,FMC_NE1,,,EVENTOUT, +PortD,PD8,,,,,,,,USART3_TX,,,,,FMC_D13,,,EVENTOUT, +PortD,PD9,,,,,,,,USART3_RX,,,,,FMC_D14,,,EVENTOUT, +PortD,PD10,,,,,,,,USART3_CK,,,,,FMC_D15,,,EVENTOUT, +PortD,PD11,,,,,,,,USART3_CTS,,QUADSPI_BK1_IO0,SAI2_SD_A,,FMC_A16/FMC_CLE,,,EVENTOUT, +PortD,PD12,,,TIM4_CH1,LPTIM1_IN1,,,,USART3_RTS,,QUADSPI_BK1_IO1,SAI2_FS_A,,FMC_A17/FMC_ALE,,,EVENTOUT, +PortD,PD13,,,TIM4_CH2,LPTIM1_OUT,,,,,,QUADSPI_BK1_IO3,SAI2_SCK_A,,FMC_A18,,,EVENTOUT, +PortD,PD14,,,TIM4_CH3,,,,,,UART8_CTS,,,,FMC_D0,,,EVENTOUT, +PortD,PD15,,,TIM4_CH4,,,,,,UART8_RTS,,,,FMC_D1,,,EVENTOUT, +PortE,PE0,,,TIM4_ETR,LPTIM1_ETR,,,,,UART8_RX,,SAI2_MCK_A,,FMC_NBL0,,,EVENTOUT, +PortE,PE1,,,,LPTIM1_IN2,,,,,UART8_TX,,,,FMC_NBL1,,,EVENTOUT, +PortE,PE2,TRACECLK,,,,,SPI4_SCK,SAI1_MCLK_A,,,QUADSPI_BK1_IO2,,,FMC_A23,,,EVENTOUT, +PortE,PE3,TRACED0,,,,,,SAI1_SD_B,,,,,,FMC_A19,,,EVENTOUT, +PortE,PE4,TRACED1,,,,,SPI4_NSS,SAI1_FS_A,,,,,,FMC_A20,,,EVENTOUT, +PortE,PE5,TRACED2,,,TIM9_CH1,,SPI4_MISO,SAI1_SCK_A,,,,,,FMC_A21,,,EVENTOUT, +PortE,PE6,TRACED3,TIM1_BKIN2,,TIM9_CH2,,SPI4_MOSI,SAI1_SD_A,,,,SAI2_MCK_B,,FMC_A22,,,EVENTOUT, +PortE,PE7,,TIM1_ETR,,,,,,,UART7_RX,,QUADSPI_BK2_IO0,,FMC_D4,,,EVENTOUT, +PortE,PE8,,TIM1_CH1N,,,,,,,UART7_TX,,QUADSPI_BK2_IO1,,FMC_D5,,,EVENTOUT, +PortE,PE9,,TIM1_CH1,,,,,,,UART7_RTS,,QUADSPI_BK2_IO2,,FMC_D6,,,EVENTOUT, +PortE,PE10,,TIM1_CH2N,,,,,,,UART7_CTS,,QUADSPI_BK2_IO3,,FMC_D7,,,EVENTOUT, +PortE,PE11,,TIM1_CH2,,,,SPI4_NSS,,,,,SAI2_SD_B,,FMC_D8,,,EVENTOUT, +PortE,PE12,,TIM1_CH3N,,,,SPI4_SCK,,,,,SAI2_SCK_B,,FMC_D9,,,EVENTOUT, +PortE,PE13,,TIM1_CH3,,,,SPI4_MISO,,,,,SAI2_FS_B,,FMC_D10,,,EVENTOUT, +PortE,PE14,,TIM1_CH4,,,,SPI4_MOSI,,,,,SAI2_MCK_B,,FMC_D11,,,EVENTOUT, +PortE,PE15,,TIM1_BKIN,,,,,,,,,,,FMC_D12,,,EVENTOUT, +PortF,PF0,,,,,I2C2_SDA,,,,,,,,FMC_A0,,,EVENTOUT, +PortF,PF1,,,,,I2C2_SCL,,,,,,,,FMC_A1,,,EVENTOUT, +PortF,PF2,,,,,I2C2_SMBA,,,,,,,,FMC_A2,,,EVENTOUT, +PortF,PF3,,,,,,,,,,,,,FMC_A3,,,EVENTOUT,ADC3_IN9 +PortF,PF4,,,,,,,,,,,,,FMC_A4,,,EVENTOUT,ADC3_IN14 +PortF,PF5,,,,,,,,,,,,,FMC_A5,,,EVENTOUT,ADC3_IN15 +PortF,PF6,,,,TIM10_CH1,,SPI5_NSS,SAI1_SD_B,,UART7_RX,QUADSPI_BK1_IO3,,,,,,EVENTOUT,ADC3_IN4 +PortF,PF7,,,,TIM11_CH1,,SPI5_SCK,SAI1_MCLK_B,,UART7_TX,QUADSPI_BK1_IO2,,,,,,EVENTOUT,ADC3_IN5 +PortF,PF8,,,,,,SPI5_MISO,SAI1_SCK_B,,UART7_RTS,TIM13_CH1,QUADSPI_BK1_IO0,,,,,EVENTOUT,ADC3_IN6 +PortF,PF9,,,,,,SPI5_MOSI,SAI1_FS_B,,UART7_CTS,TIM14_CH1,QUADSPI_BK1_IO1,,,,,EVENTOUT,ADC3_IN7 +PortF,PF10,,,,,,,,,,,,,,,,EVENTOUT,ADC3_IN8 +PortF,PF11,,,,,,SPI5_MOSI,,,,,SAI2_SD_B,,FMC_SDNRAS,,,EVENTOUT, +PortF,PF12,,,,,,,,,,,,,FMC_A6,,,EVENTOUT, +PortF,PF13,,,,,,,,,,,,,FMC_A7,,,EVENTOUT, +PortF,PF14,,,,,,,,,,,,,FMC_A8,,,EVENTOUT, +PortF,PF15,,,,,,,,,,,,,FMC_A9,,,EVENTOUT, +PortG,PG0,,,,,,,,,,,,,FMC_A10,,,EVENTOUT, +PortG,PG1,,,,,,,,,,,,,FMC_A11,,,EVENTOUT, +PortG,PG2,,,,,,,,,,,,,FMC_A12,,,EVENTOUT, +PortG,PG3,,,,,,,,,,,,,FMC_A13,,,EVENTOUT, +PortG,PG4,,,,,,,,,,,,,FMC_A14/FMC_BA0,,,EVENTOUT, +PortG,PG5,,,,,,,,,,,,,FMC_A15/FMC_BA1,,,EVENTOUT, +PortG,PG6,,,,,,,,,,,,,,,,EVENTOUT, +PortG,PG7,,,,,,,,,USART6_CK,,,,FMC_INT,,,EVENTOUT, +PortG,PG8,,,,,,,,,USART6_RTS,,,,FMC_SDCLK,,,EVENTOUT, +PortG,PG9,,,,,,,,,USART6_RX,QUADSPI_BK2_IO2,SAI2_FS_B,SDMMC2_D0,FMC_NE2/FMC_NCE,,,EVENTOUT, +PortG,PG10,,,,,,,,,,,SAI2_SD_B,SDMMC2_D1,FMC_NE3,,,EVENTOUT, +PortG,PG11,,,,,,,,,,,SDMMC2_D2,,,,,EVENTOUT, +PortG,PG12,,,,LPTIM1_IN1,,,,,USART6_RTS,,,SDMMC2_D3,FMC_NE4,,,EVENTOUT, +PortG,PG13,TRACED0,,,LPTIM1_OUT,,,,,USART6_CTS,,,,FMC_A24,,,EVENTOUT, +PortG,PG14,TRACED1,,,LPTIM1_ETR,,,,,USART6_TX,QUADSPI_BK2_IO3,,,FMC_A25,,,EVENTOUT, +PortG,PG15,,,,,,,,,USART6_CTS,,,,FMC_SDNCAS,,,EVENTOUT, +PortH,PH0,,,,,,,,,,,,,,,,EVENTOUT, +PortH,PH1,,,,,,,,,,,,,,,,EVENTOUT, +PortH,PH2,,,,LPTIM1_IN2,,,,,,QUADSPI_BK2_IO0,SAI2_SCK_B,,FMC_SDCKE0,,,EVENTOUT, +PortH,PH3,,,,,,,,,,QUADSPI_BK2_IO1,SAI2_MCK_B,,FMC_SDNE0,,,EVENTOUT, +PortH,PH4,,,,,I2C2_SCL,,,,,,OTG_HS_ULPI_NXT,,,,,EVENTOUT, +PortH,PH5,,,,,I2C2_SDA,SPI5_NSS,,,,,,,FMC_SDNWE,,,EVENTOUT, +PortH,PH6,,,,,I2C2_SMBA,SPI5_SCK,,,,TIM12_CH1,,,FMC_SDNE1,,,EVENTOUT, +PortH,PH7,,,,,I2C3_SCL,SPI5_MISO,,,,,,,FMC_SDCKE1,,,EVENTOUT, +PortH,PH8,,,,,I2C3_SDA,,,,,,,,FMC_D16,,,EVENTOUT, +PortH,PH9,,,,,I2C3_SMBA,,,,,TIM12_CH2,,,FMC_D17,,,EVENTOUT, +PortH,PH10,,,TIM5_CH1,,,,,,,,,,FMC_D18,,,EVENTOUT, +PortH,PH11,,,TIM5_CH2,,,,,,,,,,FMC_D19,,,EVENTOUT, +PortH,PH12,,,TIM5_CH3,,,,,,,,,,FMC_D20,,,EVENTOUT, +PortH,PH13,,,,TIM8_CH1N,,,,,UART4_TX,CAN1_TX,,,FMC_D21,,,EVENTOUT, +PortH,PH14,,,,TIM8_CH2N,,,,,UART4_RX,CAN1_RX,,,FMC_D22,,,EVENTOUT, +PortH,PH15,,,,TIM8_CH3N,,,,,,,,,FMC_D23,,,EVENTOUT, +PortI,PI0,,,TIM5_CH4,,,SPI2_NSS/I2S2_WS,,,,,,,FMC_D24,,,EVENTOUT, +PortI,PI1,,,,TIM8_BKIN2,,SPI2_SCK/I2S2_CK,,,,,,,FMC_D25,,,EVENTOUT, +PortI,PI2,,,,TIM8_CH4,,SPI2_MISO,,,,,,,FMC_D26,,,EVENTOUT, +PortI,PI3,,,,TIM8_ETR,,SPI2_MOSI/I2S2_SD,,,,,,,FMC_D27,,,EVENTOUT, +PortI,PI4,,,,TIM8_BKIN,,,,,,,SAI2_MCK_A,,FMC_NBL2,,,EVENTOUT, +PortI,PI5,,,,TIM8_CH1,,,,,,,SAI2_SCK_A,,FMC_NBL3,,,EVENTOUT, +PortI,PI6,,,,TIM8_CH2,,,,,,,SAI2_SD_A,,FMC_D28,,,EVENTOUT, +PortI,PI7,,,,TIM8_CH3,,,,,,,SAI2_FS_A,,FMC_D29,,,EVENTOUT, +PortI,PI8,,,,,,,,,,,,,,,,EVENTOUT, +PortI,PI9,,,,,,,,,UART4_RX,CAN1_RX,,,FMC_D30,,,EVENTOUT, +PortI,PI10,,,,,,,,,,,,,FMC_D31,,,EVENTOUT, +PortI,PI11,,,,,,,,,,,OTG_HS_ULPI_DIR,,,,,EVENTOUT, +PortI,PI12,,,,,,,,,,,,,,,,EVENTOUT, +PortI,PI13,,,,,,,,,,,,,,,,EVENTOUT, +PortI,PI14,,,,,,,,,,,,,,,,EVENTOUT, +PortI,PI15,,,,,,,,,,,,,,,,EVENTOUT, diff --git a/ports/stm32/boards/stm32f746.ld b/ports/stm32/boards/stm32f746.ld index ce5e85bb6..b5864453d 100644 --- a/ports/stm32/boards/stm32f746.ld +++ b/ports/stm32/boards/stm32f746.ld @@ -22,9 +22,6 @@ _minimum_heap_size = 16K; aligned for a call. */ _estack = ORIGIN(RAM) + LENGTH(RAM); -/* define common sections and symbols */ -INCLUDE common.ld - /* RAM extents for the garbage collector */ _ram_start = ORIGIN(RAM); _ram_end = ORIGIN(RAM) + LENGTH(RAM); diff --git a/ports/stm32/boards/stm32f746_af.csv b/ports/stm32/boards/stm32f746_af.csv index eabc9ab3b..8069edc7b 100644 --- a/ports/stm32/boards/stm32f746_af.csv +++ b/ports/stm32/boards/stm32f746_af.csv @@ -5,7 +5,7 @@ PortA,PA1,,TIM2_CH2,TIM5_CH2,,,,,USART2_RTS,UART4_RX,QUADSPI_BK1_IO3,SAI2_MCK_B, PortA,PA2,,TIM2_CH3,TIM5_CH3,TIM9_CH1,,,,USART2_TX,SAI2_SCK_B,,,ETH_MDIO,,,LCD_R1,EVENTOUT PortA,PA3,,TIM2_CH4,TIM5_CH4,TIM9_CH2,,,,USART2_RX,,,OTG_HS_ULPI_D0,ETH_MII_COL,,,LCD_B5,EVENTOUT PortA,PA4,,,,,,SPI1_NSS/I2S1_WS,SPI3_NSS/I2S3_WS,USART2_CK,,,,,OTG_HS_SOF,DCMI_HSYNC,LCD_VSYNC,EVENTOUT -PortA,PA5,,TIM2_CH1/TIM2_ETR,TIM8_CH1N,SPI1_SCK/I2S1_CK,,,,,,,OTG_HS_ULPI_CK,,,,LCD_R4,EVENTOUT +PortA,PA5,,TIM2_CH1/TIM2_ETR,,TIM8_CH1N,,SPI1_SCK/I2S1_CK,,,,,OTG_HS_ULPI_CK,,,,LCD_R4,EVENTOUT PortA,PA6,,TIM1_BKIN,TIM3_CH1,TIM8_BKIN,,SPI1_MISO,,,,TIM13_CH1,,,,DCMI_PIXCLK,LCD_G2,EVENTOUT PortA,PA7,,TIM1_CH1N,TIM3_CH2,TIM8_CH1N,,SPI1_MOSI/I2S1_SD,,,,TIM14_CH1,,ETH_MII_RX_DV/ETH_RMII_CRS_DV,FMC_SDNWE,,,EVENTOUT PortA,PA8,MCO1,TIM1_CH1,,TIM8_BKIN2,I2C3_SCL,,,USART1_CK,,,OTG_FS_SOF,,,,LCD_R6,EVENTOUT @@ -13,16 +13,16 @@ PortA,PA9,,TIM1_CH2,,,I2C3_SMBA,SPI2_SCK/I2S2_CK,,USART1_TX,,,,,,DCMI_D0,,EVENTO PortA,PA10,,TIM1_CH3,,,,,,USART1_RX,,,OTG_FS_ID,,,DCMI_D1,,EVENTOUT PortA,PA11,,TIM1_CH4,,,,,,USART1_CTS,,CAN1_RX,OTG_FS_DM,,,,LCD_R4,EVENTOUT PortA,PA12,,TIM1_ETR,,,,,,USART1_RTS,SAI2_FS_B,CAN1_TX,OTG_FS_DP,,,,LCD_R5,EVENTOUT -PortA,PA13,JTMS,SWDIO,,,,,,,,,,,,,,EVENTOUT -PortA,PA14,JTCK,SWCLK,,,,,,,,,,,,,,EVENTOUT -PortA,PA15,JTDI,TIM2_CH1/TIM2_ETR,,,HDMICE,CSPI1_NSS/I2S1_WS,SPI3_NSS/I2S3_WS,,UART4_RTS,,,,,,,EVENTOUT -PortB,PB0,,TIM1_CH2N,TIM3_CH3T,IM8_CH2N,,,,,UART4_CTS,LCD_R3,OTG_HS_ULPI_D1,ETH_MII_RXD2,,,,EVENTOUT -PortB,PB1,,TIM1_CH3N,TIM3_CH4T,IM8_CH3N,,,,,,LCD_R6,OTG_HS_ULPI_D2,ETH_MII_RXD3,,,,EVENTOUT +PortA,PA13,JTMS/SWDIO,,,,,,,,,,,,,,,EVENTOUT +PortA,PA14,JTCK/SWCLK,,,,,,,,,,,,,,,EVENTOUT +PortA,PA15,JTDI,TIM2_CH1/TIM2_ETR,,,HDMI_CEC,SPI1_NSS/I2S1_WS,SPI3_NSS/I2S3_WS,,UART4_RTS,,,,,,,EVENTOUT +PortB,PB0,,TIM1_CH2N,TIM3_CH3,TIM8_CH2N,,,,,UART4_CTS,LCD_R3,OTG_HS_ULPI_D1,ETH_MII_RXD2,,,,EVENTOUT +PortB,PB1,,TIM1_CH3N,TIM3_CH4,TIM8_CH3N,,,,,,LCD_R6,OTG_HS_ULPI_D2,ETH_MII_RXD3,,,,EVENTOUT PortB,PB2,,,,,,,SAI1_SD_A,SPI3_MOSI/I2S3_SD,,QUADSPI_CLK,,,,,,EVENTOUT PortB,PB3,JTDO/TRACESWO,TIM2_CH2,,,,SPI1_SCK/I2S1_CK,SPI3_SCK/I2S3_CK,,,,,,,,,EVENTOUT PortB,PB4,NJTRST,,TIM3_CH1,,,SPI1_MISO,SPI3_MISO,SPI2_NSS/I2S2_WS,,,,,,,,EVENTOUT PortB,PB5,,,TIM3_CH2,,I2C1_SMBA,SPI1_MOSI/I2S1_SD,SPI3_MOSI/I2S3_SD,,,CAN2_RX,OTG_HS_ULPI_D7,ETH_PPS_OUT,FMC_SDCKE1,DCMI_D10,,EVENTOUT -PortB,PB6,,,TIM4_CH1,HDMICEC,I2C1_SCL,,,USART1_TX,,CAN2_TX,QUADSPI_BK1_NCS,,FMC_SDNE1,DCMI_D5,,EVENTOUT +PortB,PB6,,,TIM4_CH1,HDMI_CEC,I2C1_SCL,,,USART1_TX,,CAN2_TX,QUADSPI_BK1_NCS,,FMC_SDNE1,DCMI_D5,,EVENTOUT PortB,PB7,,,TIM4_CH2,,I2C1_SDA,,,USART1_RX,,,,,FMC_NL,DCMI_VSYNC,,EVENTOUT PortB,PB8,,,TIM4_CH3,TIM10_CH1,I2C1_SCL,,,,,CAN1_RX,,ETH_MII_TXD3,SDMMC1_D4,DCMI_D6,LCD_B6,EVENTOUT PortB,PB9,,,TIM4_CH4,TIM11_CH1,I2C1_SDA,SPI2_NSS/I2S2_WS,,,,CAN1_TX,,,SDMMC1_D5,DCMI_D7,LCD_B7,EVENTOUT @@ -168,4 +168,3 @@ PortK,PK4,,,,,,,,,,,,,,,LCD_B5,EVENTOUT PortK,PK5,,,,,,,,,,,,,,,LCD_B6,EVENTOUT PortK,PK6,,,,,,,,,,,,,,,LCD_B7,EVENTOUT PortK,PK7,,,,,,,,,,,,,,,LCD_DE,EVENTOUT - diff --git a/ports/stm32/boards/stm32f767.ld b/ports/stm32/boards/stm32f767.ld index 225abd810..c05fd8021 100644 --- a/ports/stm32/boards/stm32f767.ld +++ b/ports/stm32/boards/stm32f767.ld @@ -7,6 +7,7 @@ MEMORY { FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K FLASH_ISR (rx) : ORIGIN = 0x08000000, LENGTH = 32K /* sector 0, 32K */ + FLASH_APP (rx) : ORIGIN = 0x08008000, LENGTH = 2016K /* sectors 1-11 3x32K 1*128K 7*256K */ FLASH_FS (r) : ORIGIN = 0x08008000, LENGTH = 96K /* sectors 1, 2, 3 (32K each) */ FLASH_TEXT (rx) : ORIGIN = 0x08020000, LENGTH = 896K /* sectors 4-7 1*128Kib 3*256KiB = 896K */ DTCM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K /* Used for storage cache */ @@ -22,9 +23,6 @@ _minimum_heap_size = 16K; aligned for a call. */ _estack = ORIGIN(RAM) + LENGTH(RAM); -/* define common sections and symbols */ -INCLUDE common.ld - /* RAM extents for the garbage collector */ _ram_start = ORIGIN(RAM); _ram_end = ORIGIN(RAM) + LENGTH(RAM); diff --git a/ports/stm32/boards/stm32f767_af.csv b/ports/stm32/boards/stm32f767_af.csv index 1708dfcca..0c8069ec2 100644 --- a/ports/stm32/boards/stm32f767_af.csv +++ b/ports/stm32/boards/stm32f767_af.csv @@ -1,170 +1,170 @@ -Port,,AF0,AF1,AF2,AF3,AF4,AF5,AF6,AF7,AF8,AF9,AF10,AF11,AF12,AF13,AF14,AF15 -,,SYS,TIM1/2,TIM3/4/5,TIM8/9/10/11/LPTIM1/CEC,I2C1/2/3/4/CEC,SPI1/2/3/4/5/6,SPI3/SAI1,SPI2/3/USART1/2/3/UART5/SPDIFRX,SAI2/USART6/UART4/5/7/8/SPDIFRX,CAN1/2/TIM12/13/14/QUADSPI/LCD,SAI2/QUADSPI/SDMMC2/OTG2_HS/OTG1_FS,SDMMC2/ETH,FMC/SDMMC1/OTG2_FS,DCMI,LCD,SYS -PortA,PA0,,TIM2_CH1/TIM2_ETR,TIM5_CH1,TIM8_ETR,,,,USART2_CTS,UART4_TX,,SAI2_SD_B,ETH_MII_CRS,,,,EVENTOUT -PortA,PA1,,TIM2_CH2,TIM5_CH2,,,,,USART2_RTS,UART4_RX,QUADSPI_BK1_IO3,SAI2_MCK_B,ETH_MII_RX_CLK/ETH_RMII_REF_CLK,,,LCD_R2,EVENTOUT -PortA,PA2,,TIM2_CH3,TIM5_CH3,TIM9_CH1,,,,USART2_TX,SAI2_SCK_B,,,ETH_MDIO,,,LCD_R1,EVENTOUT -PortA,PA3,,TIM2_CH4,TIM5_CH4,TIM9_CH2,,,,USART2_RX,,,OTG_HS_ULPI_D0,ETH_MII_COL,,,LCD_B5,EVENTOUT -PortA,PA4,,,,,,SPI1_NSS/I2S1_WS,SPI3_NSS/I2S3_WS,USART2_CK,,,,,OTG_HS_SOF,DCMI_HSYNC,LCD_VSYNC,EVENTOUT -PortA,PA5,,TIM2_CH1/TIM2_ETR,,TIM8_CH1N,,SPI1_SCK/I2S1_CK,,,,,OTG_HS_ULPI_CK,,,,LCD_R4,EVENTOUT -PortA,PA6,,TIM1_BKIN,TIM3_CH1,TIM8_BKIN,,SPI1_MISO,,,,TIM13_CH1,,,,DCMI_PIXCLK,LCD_G2,EVENTOUT -PortA,PA7,,TIM1_CH1N,TIM3_CH2,TIM8_CH1N,,SPI1_MOSI/I2S1_SD,,,,TIM14_CH1,,ETH_MII_RX_DV/ETH_RMII_CRS_DV,FMC_SDNWE,,,EVENTOUT -PortA,PA8,MCO1,TIM1_CH1,,TIM8_BKIN2,I2C3_SCL,,,USART1_CK,,,OTG_FS_SOF,,,,LCD_R6,EVENTOUT -PortA,PA9,,TIM1_CH2,,,I2C3_SMBA,SPI2_SCK/I2S2_CK,,USART1_TX,,,,,,DCMI_D0,,EVENTOUT -PortA,PA10,,TIM1_CH3,,,,,,USART1_RX,,,OTG_FS_ID,,,DCMI_D1,,EVENTOUT -PortA,PA11,,TIM1_CH4,,,,,,USART1_CTS,,CAN1_RX,OTG_FS_DM,,,,LCD_R4,EVENTOUT -PortA,PA12,,TIM1_ETR,,,,,,USART1_RTS,SAI2_FS_B,CAN1_TX,OTG_FS_DP,,,,LCD_R5,EVENTOUT -PortA,PA13,JTMS,SWDIO,,,,,,,,,,,,,,EVENTOUT -PortA,PA14,JTCK,SWCLK,,,,,,,,,,,,,,EVENTOUT -PortA,PA15,JTDI,TIM2_CH1/TIM2_ETR,,,HDMICEC,SPI1_NSS/I2S1_WS,SPI3_NSS/I2S3_WS,,UART4_RTS,,,,,,,EVENTOUT -PortB,PB0,,TIM1_CH2N,TIM3_CH3T,TIM8_CH2N,,,,,UART4_CTS,LCD_R3,OTG_HS_ULPI_D1,ETH_MII_RXD2,,,,EVENTOUT -PortB,PB1,,TIM1_CH3N,TIM3_CH4T,TIM8_CH3N,,,,,,LCD_R6,OTG_HS_ULPI_D2,ETH_MII_RXD3,,,,EVENTOUT -PortB,PB2,,,,,,,SAI1_SD_A,SPI3_MOSI/I2S3_SD,,QUADSPI_CLK,,,,,,EVENTOUT -PortB,PB3,JTDO/TRACESWO,TIM2_CH2,,,,SPI1_SCK/I2S1_CK,SPI3_SCK/I2S3_CK,,,,SDMMC2_D2,,,,,EVENTOUT -PortB,PB4,NJTRST,,TIM3_CH1,,,SPI1_MISO,SPI3_MISO,SPI2_NSS/I2S2_WS,,,SDMMC2_D3,,,,,EVENTOUT -PortB,PB5,,,TIM3_CH2,,I2C1_SMBA,SPI1_MOSI/I2S1_SD,SPI3_MOSI/I2S3_SD,,,CAN2_RX,OTG_HS_ULPI_D7,ETH_PPS_OUT,FMC_SDCKE1,DCMI_D10,,EVENTOUT -PortB,PB6,,,TIM4_CH1,HDMICEC,I2C1_SCL,,,USART1_TX,,CAN2_TX,QUADSPI_BK1_NCS,,FMC_SDNE1,DCMI_D5,,EVENTOUT -PortB,PB7,,,TIM4_CH2,,I2C1_SDA,,,USART1_RX,,,,,FMC_NL,DCMI_VSYNC,,EVENTOUT -PortB,PB8,,,TIM4_CH3,TIM10_CH1,I2C1_SCL,,,,,CAN1_RX,SDMMC2_D4,ETH_MII_TXD3,SDMMC1_D4,DCMI_D6,LCD_B6,EVENTOUT -PortB,PB9,,,TIM4_CH4,TIM11_CH1,I2C1_SDA,SPI2_NSS/I2S2_WS,,,,CAN1_TX,SDMMC2_D5,,SDMMC1_D5,DCMI_D7,LCD_B7,EVENTOUT -PortB,PB10,,TIM2_CH3,,,I2C2_SCL,SPI2_SCK/I2S2_CK,,USART3_TX,,,OTG_HS_ULPI_D3,ETH_MII_RX_ER,,,LCD_G4,EVENTOUT -PortB,PB11,,TIM2_CH4,,,I2C2_SDA,,,USART3_RX,,,OTG_HS_ULPI_D4,ETH_MII_TX_EN/ETH_RMII_TX_EN,,,LCD_G5,EVENTOUT -PortB,PB12,,TIM1_BKIN,,,I2C2_SMBA,SPI2_NSS/I2S2_WS,,USART3_CK,,CAN2_RX,OTG_HS_ULPI_D5,ETH_MII_TXD0/ETH_RMII_TXD0,OTG_HS_ID,,,EVENTOUT -PortB,PB13,,TIM1_CH1N,,,,SPI2_SCK/I2S2_CK,,USART3_CTS,,CAN2_TX,OTG_HS_ULPI_D6,ETH_MII_TXD1/ETH_RMII_TXD1,,,,EVENTOUT -PortB,PB14,,TIM1_CH2N,,TIM8_CH2N,,SPI2_MISO,,USART3_RTS,,TIM12_CH1,SDMMC2_D0,,OTG_HS_DM,,,EVENTOUT -PortB,PB15,RTC_REFIN,TIM1_CH3N,,TIM8_CH3N,,SPI2_MOSI/I2S2_SD,,,,TIM12_CH2,SDMMC2_D1,,OTG_HS_DP,,,EVENTOUT -PortC,PC0,,,,,,,,,SAI2_FS_B,,OTG_HS_ULPI_STP,,FMC_SDNWE,,LCD_R5,EVENTOUT -PortC,PC1,TRACED0,,,,,SPI2_MOSI/I2S2_SD,SAI1_SD_A,,,,,ETH_MDC,,,,EVENTOUT -PortC,PC2,,,,,,SPI2_MISO,,,,,OTG_HS_ULPI_DIR,ETH_MII_TXD2,FMC_SDNE0,,,EVENTOUT -PortC,PC3,,,,,,SPI2_MOSI/I2S2_SD,,,,,OTG_HS_ULPI_NXT,ETH_MII_TX_CLK,FMC_SDCKE0,,,EVENTOUT -PortC,PC4,,,,,,I2S1_MCK,,,SPDIFRX_IN2,,,ETH_MII_RXD0/ETH_RMII_RXD0,FMC_SDNE0,,,EVENTOUT -PortC,PC5,,,,,,,,,SPDIFRX_IN3,,,ETH_MII_RXD1/ETH_RMII_RXD1,FMC_SDCKE0,,,EVENTOUT -PortC,PC6,,,TIM3_CH1,TIM8_CH1,,I2S2_MCK,,,USART6_TX,,SDMMC2_D6,,SDMMC1_D6,DCMI_D0,LCD_HSYNC,EVENTOUT -PortC,PC7,,,TIM3_CH2,TIM8_CH2,,,I2S3_MCK,,USART6_RX,,SDMMC2_D7,,SDMMC1_D7,DCMI_D1,LCD_G6,EVENTOUT -PortC,PC8,TRACED1,,TIM3_CH3,TIM8_CH3,,,,UART5_RTS,USART6_CK,,,,SDMMC1_D0,DCMI_D2,,EVENTOUT -PortC,PC9,MCO2,,TIM3_CH4,TIM8_CH4,I2C3_SDA,I2S2_CKIN,,UART5_CTS,,QUADSPI_BK1_IO0,,,SDMMC1_D1,DCMI_D3,,EVENTOUT -PortC,PC10,,,,,,,SPI3_SCK/I2S3_CK,USART3_TX,UART4_TX,QUADSPI_BK1_IO1,,,SDMMC1_D2,DCMI_D8,LCD_R2,EVENTOUT -PortC,PC11,,,,,,,SPI3_MISO,USART3_RX,UART4_RX,QUADSPI_BK2_NCS,,,SDMMC1_D3,DCMI_D4,,EVENTOUT -PortC,PC12,TRACED3,,,,,,SPI3_MOSI/I2S3_SD,USART3_CK,UART5_TX,,,,SDMMC1_CK,DCMI_D9,,EVENTOUT -PortC,PC13,,,,,,,,,,,,,,,,EVENTOUT -PortC,PC14,,,,,,,,,,,,,,,,EVENTOUT -PortC,PC15,,,,,,,,,,,,,,,,EVENTOUT -PortD,PD0,,,,,,,,,,CAN1_RX,,,FMC_D2,,,EVENTOUT -PortD,PD1,,,,,,,,,,CAN1_TX,,,FMC_D3,,,EVENTOUT -PortD,PD2,TRACED2,,TIM3_ETR,,,,,,UART5_RX,,,,SDMMC1_CMD,DCMI_D11,,EVENTOUT -PortD,PD3,,,,,,SPI2_SCK/I2S2_CK,,USART2_CTS,,,,,FMC_CLK,DCMI_D5,LCD_G7,EVENTOUT -PortD,PD4,,,,,,,,USART2_RTS,,,,,FMC_NOE,,,EVENTOUT -PortD,PD5,,,,,,,,USART2_TX,,,,,FMC_NWE,,,EVENTOUT -PortD,PD6,,,,,,SPI3_MOSI/I2S3_SD,SAI1_SD_A,USART2_RX,,,,SDMMC2_CK,FMC_NWAIT,DCMI_D10,LCD_B2,EVENTOUT -PortD,PD7,,,,,,,,USART2_CK,SPDIFRX_IN0,,,SDMMC2_CMD,FMC_NE1,,,EVENTOUT -PortD,PD8,,,,,,,,USART3_TX,SPDIFRX_IN1,,,,FMC_D13,,,EVENTOUT -PortD,PD9,,,,,,,,USART3_RX,,,,,FMC_D14,,,EVENTOUT -PortD,PD10,,,,,,,,USART3_CK,,,,,FMC_D15,,LCD_B3,EVENTOUT -PortD,PD11,,,,,I2C4_SMBA,,,USART3_CTS,,QUADSPI_BK1_IO0,SAI2_SD_A,,FMC_A16/FMC_CLE,,,EVENTOUT -PortD,PD12,,,TIM4_CH1,LPTIM1_IN1,I2C4_SCL,,,USART3_RTS,,QUADSPI_BK1_IO1,SAI2_FS_A,,FMC_A17/FMC_ALE,,,EVENTOUT -PortD,PD13,,,TIM4_CH2,LPTIM1_OUT,I2C4_SDA,,,,,QUADSPI_BK1_IO3,SAI2_SCK_A,,FMC_A18,,,EVENTOUT -PortD,PD14,,,TIM4_CH3,,,,,,UART8_CTS,,,,FMC_D0,,,EVENTOUT -PortD,PD15,,,TIM4_CH4,,,,,,UART8_RTS,,,,FMC_D1,,,EVENTOUT -PortE,PE0,,,TIM4_ETR,LPTIM1_ETR,,,,,UART8_RX,,SAI2_MCK_A,,FMC_NBL0,DCMI_D2,,EVENTOUT -PortE,PE1,,,,LPTIM1_IN2,,,,,UART8_TX,,,,FMC_NBL1,DCMI_D3,,EVENTOUT -PortE,PE2,TRACECLK,,,,,SPI4_SCK,SAI1_MCLK_A,,,QUADSPI_BK1_IO2,,ETH_MII_TXD3,FMC_A23,,,EVENTOUT -PortE,PE3,TRACED0,,,,,,SAI1_SD_B,,,,,,FMC_A19,,,EVENTOUT -PortE,PE4,TRACED1,,,,,SPI4_NSS,SAI1_FS_A,,,,,,FMC_A20,DCMI_D4,LCD_B0,EVENTOUT -PortE,PE5,TRACED2,,,TIM9_CH1,,SPI4_MISO,SAI1_SCK_A,,,,,,FMC_A21,DCMI_D6,LCD_G0,EVENTOUT -PortE,PE6,TRACED3,TIM1_BKIN2,,TIM9_CH2,,SPI4_MOSI,SAI1_SD_A,,,,SAI2_MCK_B,,FMC_A22,DCMI_D7,LCD_G1,EVENTOUT -PortE,PE7,,TIM1_ETR,,,,,,,UART7_RX,,QUADSPI_BK2_IO0,,FMC_D4,,,EVENTOUT -PortE,PE8,,TIM1_CH1N,,,,,,,UART7_TX,,QUADSPI_BK2_IO1,,FMC_D5,,,EVENTOUT -PortE,PE9,,TIM1_CH1,,,,,,,UART7_RTS,,QUADSPI_BK2_IO2,,FMC_D6,,,EVENTOUT -PortE,PE10,,TIM1_CH2N,,,,,,,UART7_CTS,,QUADSPI_BK2_IO3,,FMC_D7,,,EVENTOUT -PortE,PE11,,TIM1_CH2,,,,SPI4_NSS,,,,,SAI2_SD_B,,FMC_D8,,LCD_G3,EVENTOUT -PortE,PE12,,TIM1_CH3N,,,,SPI4_SCK,,,,,SAI2_SCK_B,,FMC_D9,,LCD_B4,EVENTOUT -PortE,PE13,,TIM1_CH3,,,,SPI4_MISO,,,,,SAI2_FS_B,,FMC_D10,,LCD_DE,EVENTOUT -PortE,PE14,,TIM1_CH4,,,,SPI4_MOSI,,,,,SAI2_MCK_B,,FMC_D11,,LCD_CLK,EVENTOUT -PortE,PE15,,TIM1_BKIN,,,,,,,,,,,FMC_D12,,LCD_R7,EVENTOUT -PortF,PF0,,,,,I2C2_SDA,,,,,,,,FMC_A0,,,EVENTOUT -PortF,PF1,,,,,I2C2_SCL,,,,,,,,FMC_A1,,,EVENTOUT -PortF,PF2,,,,,I2C2_SMBA,,,,,,,,FMC_A2,,,EVENTOUT -PortF,PF3,,,,,,,,,,,,,FMC_A3,,,EVENTOUT -PortF,PF4,,,,,,,,,,,,,FMC_A4,,,EVENTOUT -PortF,PF5,,,,,,,,,,,,,FMC_A5,,,EVENTOUT -PortF,PF6,,,,TIM10_CH1,,SPI5_NSS,SAI1_SD_B,,UART7_RX,QUADSPI_BK1_IO3,,,,,,EVENTOUT -PortF,PF7,,,,TIM11_CH1,,SPI5_SCK,SAI1_MCLK_B,,UART7_TX,QUADSPI_BK1_IO2,,,,,,EVENTOUT -PortF,PF8,,,,,,SPI5_MISO,SAI1_SCK_B,,UART7_RTS,TIM13_CH1,QUADSPI_BK1_IO0,,,,,EVENTOUT -PortF,PF9,,,,,,SPI5_MOSI,SAI1_FS_B,,UART7_CTS,TIM14_CH1,QUADSPI_BK1_IO1,,,,,EVENTOUT -PortF,PF10,,,,,,,,,,,,,,DCMI_D11,LCD_DE,EVENTOUT -PortF,PF11,,,,,,SPI5_MOSI,,,,,SAI2_SD_B,,FMC_SDNRAS,DCMI_D12,,EVENTOUT -PortF,PF12,,,,,,,,,,,,,FMC_A6,,,EVENTOUT -PortF,PF13,,,,,I2C4_SMBA,,,,,,,,FMC_A7,,,EVENTOUT -PortF,PF14,,,,,I2C4_SCL,,,,,,,,FMC_A8,,,EVENTOUT -PortF,PF15,,,,,I2C4_SDA,,,,,,,,FMC_A9,,,EVENTOUT -PortG,PG0,,,,,,,,,,,,,FMC_A10,,,EVENTOUT -PortG,PG1,,,,,,,,,,,,,FMC_A11,,,EVENTOUT -PortG,PG2,,,,,,,,,,,,,FMC_A12,,,EVENTOUT -PortG,PG3,,,,,,,,,,,,,FMC_A13,,,EVENTOUT -PortG,PG4,,,,,,,,,,,,,FMC_A14/FMC_BA0,,,EVENTOUT -PortG,PG5,,,,,,,,,,,,,FMC_A15/FMC_BA1,,,EVENTOUT -PortG,PG6,,,,,,,,,,,,,,DCMI_D12,LCD_R7,EVENTOUT -PortG,PG7,,,,,,,,,USART6_CK,,,,FMC_INT,DCMI_D13,LCD_CLK,EVENTOUT -PortG,PG8,,,,,,SPI6_NSS,,SPDIFRX_IN2,USART6_RTS,,,ETH_PPS_OUT,FMC_SDCLK,,,EVENTOUT -PortG,PG9,,,,,,,,SPDIFRX_IN3,USART6_RX,QUADSPI_BK2_IO2,SAI2_FS_B,SDMMC2_D0,FMC_NE2/FMC_NCE,DCMI_VSYNC,,EVENTOUT -PortG,PG10,,,,,,,,,,LCD_G3,SAI2_SD_B,SDMMC2_D1,FMC_NE3,DCMI_D2,LCD_B2,EVENTOUT -PortG,PG11,,,,,,,,SPDIFRX_IN0,,,SDMMC2_D2,ETH_MII_TX_EN/ETH_RMII_TX_EN,,DCMI_D3,LCD_B3,EVENTOUT -PortG,PG12,,,,LPTIM1_IN1,,SPI6_MISO,,SPDIFRX_IN1,USART6_RTS,LCD_B4,,SDMMC2_D3,FMC_NE4,,LCD_B1,EVENTOUT -PortG,PG13,TRACED0,,,LPTIM1_OUT,,SPI6_SCK,,,USART6_CTS,,,ETH_MII_TXD0/ETH_RMII_TXD0,FMC_A24,,LCD_R0,EVENTOUT -PortG,PG14,TRACED1,,,LPTIM1_ETR,,SPI6_MOSI,,,USART6_TX,QUADSPI_BK2_IO3,,ETH_MII_TXD1/ETH_RMII_TXD1,FMC_A25,,LCD_B0,EVENTOUT -PortG,PG15,,,,,,,,,USART6_CTS,,,,FMC_SDNCAS,DCMI_D13,,EVENTOUT -PortH,PH0,,,,,,,,,,,,,,,,EVENTOUT -PortH,PH1,,,,,,,,,,,,,,,,EVENTOUT -PortH,PH2,,,,LPTIM1_IN2,,,,,,QUADSPI_BK2_IO0,SAI2_SCK_B,ETH_MII_CRS,FMC_SDCKE0,,LCD_R0,EVENTOUT -PortH,PH3,,,,,,,,,,QUADSPI_BK2_IO1,SAI2_MCK_B,ETH_MII_COL,FMC_SDNE0,,LCD_R1,EVENTOUT -PortH,PH4,,,,,I2C2_SCL,,,,,,OTG_HS_ULPI_NXT,,,,,EVENTOUT -PortH,PH5,,,,,I2C2_SDA,SPI5_NSS,,,,,,,FMC_SDNWE,,,EVENTOUT -PortH,PH6,,,,,I2C2_SMBA,SPI5_SCK,,,,TIM12_CH1,,ETH_MII_RXD2,FMC_SDNE1,DCMI_D8,,EVENTOUT -PortH,PH7,,,,,I2C3_SCL,SPI5_MISO,,,,,,ETH_MII_RXD3,FMC_SDCKE1,DCMI_D9,,EVENTOUT -PortH,PH8,,,,,I2C3_SDA,,,,,,,,FMC_D16,DCMI_HSYNC,LCD_R2,EVENTOUT -PortH,PH9,,,,,I2C3_SMBA,,,,,TIM12_CH2,,,FMC_D17,DCMI_D0,LCD_R3,EVENTOUT -PortH,PH10,,,TIM5_CH1,,I2C4_SMBA,,,,,,,,FMC_D18,DCMI_D1,LCD_R4,EVENTOUT -PortH,PH11,,,TIM5_CH2,,I2C4_SCL,,,,,,,,FMC_D19,DCMI_D2,LCD_R5,EVENTOUT -PortH,PH12,,,TIM5_CH3,,I2C4_SDA,,,,,,,,FMC_D20,DCMI_D3,LCD_R6,EVENTOUT -PortH,PH13,,,,TIM8_CH1N,,,,,,CAN1_TX,,,FMC_D21,,LCD_G2,EVENTOUT -PortH,PH14,,,,TIM8_CH2N,,,,,,,,,FMC_D22,DCMI_D4,LCD_G3,EVENTOUT -PortH,PH15,,,,TIM8_CH3N,,,,,,,,,FMC_D23,DCMI_D11,LCD_G4,EVENTOUT -PortI,PI0,,,TIM5_CH4,,,SPI2_NSS/I2S2_WS,,,,,,,FMC_D24,DCMI_D13,LCD_G5,EVENTOUT -PortI,PI1,,,,TIM8_BKIN2,,SPI2_SCK/I2S2_CK,,,,,,,FMC_D25,DCMI_D8,LCD_G6,EVENTOUT -PortI,PI2,,,,TIM8_CH4,,SPI2_MISO,,,,,,,FMC_D26,DCMI_D9,LCD_G7,EVENTOUT -PortI,PI3,,,,TIM8_ETR,,SPI2_MOSI/I2S2_SD,,,,,,,FMC_D27,DCMI_D10,,EVENTOUT -PortI,PI4,,,,TIM8_BKIN,,,,,,,SAI2_MCK_A,,FMC_NBL2,DCMI_D5,LCD_B4,EVENTOUT -PortI,PI5,,,,TIM8_CH1,,,,,,,SAI2_SCK_A,,FMC_NBL3,DCMI_VSYNC,LCD_B5,EVENTOUT -PortI,PI6,,,,TIM8_CH2,,,,,,,SAI2_SD_A,,FMC_D28,DCMI_D6,LCD_B6,EVENTOUT -PortI,PI7,,,,TIM8_CH3,,,,,,,SAI2_FS_A,,FMC_D29,DCMI_D7,LCD_B7,EVENTOUT -PortI,PI8,,,,,,,,,,,,,,,,EVENTOUT -PortI,PI9,,,,,,,,,,CAN1_RX,,,FMC_D30,,LCD_VSYNC,EVENTOUT -PortI,PI10,,,,,,,,,,,,ETH_MII_RX_ER,FMC_D31,,LCD_HSYNC,EVENTOUT -PortI,PI11,,,,,,,,,,,OTG_HS_ULPI_DIR,,,,,EVENTOUT -PortI,PI12,,,,,,,,,,,,,,,LCD_HSYNC,EVENTOUT -PortI,PI13,,,,,,,,,,,,,,,LCD_VSYNC,EVENTOUT -PortI,PI14,,,,,,,,,,,,,,,LCD_CLK,EVENTOUT -PortI,PI15,,,,,,,,,,,,,,,LCD_R0,EVENTOUT -PortJ,PJ0,,,,,,,,,,,,,,,LCD_R1,EVENTOUT -PortJ,PJ1,,,,,,,,,,,,,,,LCD_R2,EVENTOUT -PortJ,PJ2,,,,,,,,,,,,,,,LCD_R3,EVENTOUT -PortJ,PJ3,,,,,,,,,,,,,,,LCD_R4,EVENTOUT -PortJ,PJ4,,,,,,,,,,,,,,,LCD_R5,EVENTOUT -PortJ,PJ5,,,,,,,,,,,,,,,LCD_R6,EVENTOUT -PortJ,PJ6,,,,,,,,,,,,,,,LCD_R7,EVENTOUT -PortJ,PJ7,,,,,,,,,,,,,,,LCD_G0,EVENTOUT -PortJ,PJ8,,,,,,,,,,,,,,,LCD_G1,EVENTOUT -PortJ,PJ9,,,,,,,,,,,,,,,LCD_G2,EVENTOUT -PortJ,PJ10,,,,,,,,,,,,,,,LCD_G3,EVENTOUT -PortJ,PJ11,,,,,,,,,,,,,,,LCD_G4,EVENTOUT -PortJ,PJ12,,,,,,,,,,,,,,,LCD_B0,EVENTOUT -PortJ,PJ13,,,,,,,,,,,,,,,LCD_B1,EVENTOUT -PortJ,PJ14,,,,,,,,,,,,,,,LCD_B2,EVENTOUT -PortJ,PJ15,,,,,,,,,,,,,,,LCD_B3,EVENTOUT -PortK,PK0,,,,,,,,,,,,,,,LCD_G5,EVENTOUT -PortK,PK1,,,,,,,,,,,,,,,LCD_G6,EVENTOUT -PortK,PK2,,,,,,,,,,,,,,,LCD_G7,EVENTOUT -PortK,PK3,,,,,,,,,,,,,,,LCD_B4,EVENTOUT -PortK,PK4,,,,,,,,,,,,,,,LCD_B5,EVENTOUT -PortK,PK5,,,,,,,,,,,,,,,LCD_B6,EVENTOUT -PortK,PK6,,,,,,,,,,,,,,,LCD_B7,EVENTOUT -PortK,PK7,,,,,,,,,,,,,,,LCD_DE,EVENTOUT +Port,,AF0,AF1,AF2,AF3,AF4,AF5,AF6,AF7,AF8,AF9,AF10,AF11,AF12,AF13,AF14,AF15, +,,SYS,I2C4/UART5/TIM1/2,TIM3/4/5,TIM8/9/10/11/LPTIM1/DFSDM1/CEC,I2C1/2/3/4/USART1/CEC,SPI1/I2S1/SPI2/I2S2/SPI3/I2S3/SPI4/5/6,SPI2/I2S2/SPI3/I2S3/SAI1/I2C4/UART4/DFSDM1,SPI2/I2S2/SPI3/I2S3/SPI6/USART1/2/3/UART5/DFSDM1/SPDIF,SPI6/SAI2/USART6/UART4/5/7/8/OTG_FS/SPDIF,CAN1/2/TIM12/13/14/QUADSPI/FMC/LCD,SAI2/QUADSPI/SDMMC2/DFSDM1/OTG2_HS/OTG1_FS/LCD,I2C4/CAN3/SDMMC2/ETH,UART7/FMC/SDMMC1/MDIOS/OTG2_FS,DCMI/LCD/DSI,LCD,SYS,ADC +PortA,PA0,,TIM2_CH1/TIM2_ETR,TIM5_CH1,TIM8_ETR,,,,USART2_CTS,UART4_TX,,SAI2_SD_B,ETH_MII_CRS,,,,EVENTOUT,ADC123_IN0 +PortA,PA1,,TIM2_CH2,TIM5_CH2,,,,,USART2_RTS,UART4_RX,QUADSPI_BK1_IO3,SAI2_MCK_B,ETH_MII_RX_CLK/ETH_RMII_REF_CLK,,,LCD_R2,EVENTOUT,ADC123_IN1 +PortA,PA2,,TIM2_CH3,TIM5_CH3,TIM9_CH1,,,,USART2_TX,SAI2_SCK_B,,,ETH_MDIO,MDIOS_MDIO,,LCD_R1,EVENTOUT,ADC123_IN2 +PortA,PA3,,TIM2_CH4,TIM5_CH4,TIM9_CH2,,,,USART2_RX,,LCD_B2,OTG_HS_ULPI_D0,ETH_MII_COL,,,LCD_B5,EVENTOUT,ADC123_IN3 +PortA,PA4,,,,,,SPI1_NSS/I2S1_WS,SPI3_NSS/I2S3_WS,USART2_CK,SPI6_NSS,,,,OTG_HS_SOF,DCMI_HSYNC,LCD_VSYNC,EVENTOUT,ADC12_IN4 +PortA,PA5,,TIM2_CH1/TIM2_ETR,,TIM8_CH1N,,SPI1_SCK/I2S1_CK,,,SPI6_SCK,,OTG_HS_ULPI_CK,,,,LCD_R4,EVENTOUT,ADC12_IN5 +PortA,PA6,,TIM1_BKIN,TIM3_CH1,TIM8_BKIN,,SPI1_MISO,,,SPI6_MISO,TIM13_CH1,,,MDIOS_MDC,DCMI_PIXCLK,LCD_G2,EVENTOUT,ADC12_IN6 +PortA,PA7,,TIM1_CH1N,TIM3_CH2,TIM8_CH1N,,SPI1_MOSI/I2S1_SD,,,SPI6_MOSI,TIM14_CH1,,ETH_MII_RX_DV/ETH_RMII_CRS_DV,FMC_SDNWE,,,EVENTOUT,ADC12_IN7 +PortA,PA8,MCO1,TIM1_CH1,,TIM8_BKIN2,I2C3_SCL,,,USART1_CK,,,OTG_FS_SOF,CAN3_RX,UART7_RX,LCD_B3,LCD_R6,EVENTOUT, +PortA,PA9,,TIM1_CH2,,,I2C3_SMBA,SPI2_SCK/I2S2_CK,,USART1_TX,,,,,,DCMI_D0,LCD_R5,EVENTOUT, +PortA,PA10,,TIM1_CH3,,,,,,USART1_RX,,LCD_B4,OTG_FS_ID,,MDIOS_MDIO,DCMI_D1,LCD_B1,EVENTOUT, +PortA,PA11,,TIM1_CH4,,,,SPI2_NSS/I2S2_WS,UART4_RX,USART1_CTS,,CAN1_RX,OTG_FS_DM,,,,LCD_R4,EVENTOUT, +PortA,PA12,,TIM1_ETR,,,,SPI2_SCK/I2S2_CK,UART4_TX,USART1_RTS,SAI2_FS_B,CAN1_TX,OTG_FS_DP,,,,LCD_R5,EVENTOUT, +PortA,PA13,JTMS/SWDIO,,,,,,,,,,,,,,,EVENTOUT, +PortA,PA14,JTCK/SWCLK,,,,,,,,,,,,,,,EVENTOUT, +PortA,PA15,JTDI,TIM2_CH1/TIM2_ETR,,,HDMI_CEC,SPI1_NSS/I2S1_WS,SPI3_NSS/I2S3_WS,SPI6_NSS,UART4_RTS,,,CAN3_TX,UART7_TX,,,EVENTOUT, +PortB,PB0,,TIM1_CH2N,TIM3_CH3,TIM8_CH2N,,,DFSDM1_CKOUT,,UART4_CTS,LCD_R3,OTG_HS_ULPI_D1,ETH_MII_RXD2,,,LCD_G1,EVENTOUT,ADC12_IN8 +PortB,PB1,,TIM1_CH3N,TIM3_CH4,TIM8_CH3N,,,DFSDM1_DATAIN1,,,LCD_R6,OTG_HS_ULPI_D2,ETH_MII_RXD3,,,LCD_G0,EVENTOUT,ADC12_IN9 +PortB,PB2,,,,,,,SAI1_SD_A,SPI3_MOSI/I2S3_SD,,QUADSPI_CLK,DFSDM1_CKIN1,,,,,EVENTOUT, +PortB,PB3,JTDO/TRACESWO,TIM2_CH2,,,,SPI1_SCK/I2S1_CK,SPI3_SCK/I2S3_CK,,SPI6_SCK,,SDMMC2_D2,CAN3_RX,UART7_RX,,,EVENTOUT, +PortB,PB4,NJTRST,,TIM3_CH1,,,SPI1_MISO,SPI3_MISO,SPI2_NSS/I2S2_WS,SPI6_MISO,,SDMMC2_D3,CAN3_TX,UART7_TX,,,EVENTOUT, +PortB,PB5,,UART5_RX,TIM3_CH2,,I2C1_SMBA,SPI1_MOSI/I2S1_SD,SPI3_MOSI/I2S3_SD,,SPI6_MOSI,CAN2_RX,OTG_HS_ULPI_D7,ETH_PPS_OUT,FMC_SDCKE1,DCMI_D10,LCD_G7,EVENTOUT, +PortB,PB6,,UART5_TX,TIM4_CH1,HDMI_CEC,I2C1_SCL,,DFSDM1_DATAIN5,USART1_TX,,CAN2_TX,QUADSPI_BK1_NCS,I2C4_SCL,FMC_SDNE1,DCMI_D5,,EVENTOUT, +PortB,PB7,,,TIM4_CH2,,I2C1_SDA,,DFSDM1_CKIN5,USART1_RX,,,,I2C4_SDA,FMC_NL,DCMI_VSYNC,,EVENTOUT, +PortB,PB8,,I2C4_SCL,TIM4_CH3,TIM10_CH1,I2C1_SCL,,DFSDM1_CKIN7,UART5_RX,,CAN1_RX,SDMMC2_D4,ETH_MII_TXD3,SDMMC1_D4,DCMI_D6,LCD_B6,EVENTOUT, +PortB,PB9,,I2C4_SDA,TIM4_CH4,TIM11_CH1,I2C1_SDA,SPI2_NSS/I2S2_WS,DFSDM1_DATAIN7,UART5_TX,,CAN1_TX,SDMMC2_D5,I2C4_SMBA,SDMMC1_D5,DCMI_D7,LCD_B7,EVENTOUT, +PortB,PB10,,TIM2_CH3,,,I2C2_SCL,SPI2_SCK/I2S2_CK,DFSDM1_DATAIN7,USART3_TX,,QUADSPI_BK1_NCS,OTG_HS_ULPI_D3,ETH_MII_RX_ER,,,LCD_G4,EVENTOUT, +PortB,PB11,,TIM2_CH4,,,I2C2_SDA,,DFSDM1_CKIN7,USART3_RX,,,OTG_HS_ULPI_D4,ETH_MII_TX_EN/ETH_RMII_TX_EN,,DSI_TE,LCD_G5,EVENTOUT, +PortB,PB12,,TIM1_BKIN,,,I2C2_SMBA,SPI2_NSS/I2S2_WS,DFSDM1_DATAIN1,USART3_CK,UART5_RX,CAN2_RX,OTG_HS_ULPI_D5,ETH_MII_TXD0/ETH_RMII_TXD0,OTG_HS_ID,,,EVENTOUT, +PortB,PB13,,TIM1_CH1N,,,,SPI2_SCK/I2S2_CK,DFSDM1_CKIN1,USART3_CTS,UART5_TX,CAN2_TX,OTG_HS_ULPI_D6,ETH_MII_TXD1/ETH_RMII_TXD1,,,,EVENTOUT, +PortB,PB14,,TIM1_CH2N,,TIM8_CH2N,USART1_TX,SPI2_MISO,DFSDM1_DATAIN2,USART3_RTS,UART4_RTS,TIM12_CH1,SDMMC2_D0,,OTG_HS_DM,,,EVENTOUT, +PortB,PB15,RTC_REFIN,TIM1_CH3N,,TIM8_CH3N,USART1_RX,SPI2_MOSI/I2S2_SD,DFSDM1_CKIN2,,UART4_CTS,TIM12_CH2,SDMMC2_D1,,OTG_HS_DP,,,EVENTOUT, +PortC,PC0,,,,DFSDM1_CKIN0,,,DFSDM1_DATAIN4,,SAI2_FS_B,,OTG_HS_ULPI_STP,,FMC_SDNWE,,LCD_R5,EVENTOUT,ADC123_IN10 +PortC,PC1,TRACED0,,,DFSDM1_DATAIN0,,SPI2_MOSI/I2S2_SD,SAI1_SD_A,,,,DFSDM1_CKIN4,ETH_MDC,MDIOS_MDC,,,EVENTOUT,ADC123_IN11 +PortC,PC2,,,,DFSDM1_CKIN1,,SPI2_MISO,DFSDM1_CKOUT,,,,OTG_HS_ULPI_DIR,ETH_MII_TXD2,FMC_SDNE0,,,EVENTOUT,ADC123_IN12 +PortC,PC3,,,,DFSDM1_DATAIN1,,SPI2_MOSI/I2S2_SD,,,,,OTG_HS_ULPI_NXT,ETH_MII_TX_CLK,FMC_SDCKE0,,,EVENTOUT,ADC123_IN13 +PortC,PC4,,,,DFSDM1_CKIN2,,I2S1_MCK,,,SPDIFRX_IN2,,,ETH_MII_RXD0/ETH_RMII_RXD0,FMC_SDNE0,,,EVENTOUT,ADC12_IN14 +PortC,PC5,,,,DFSDM1_DATAIN2,,,,,SPDIFRX_IN3,,,ETH_MII_RXD1/ETH_RMII_RXD1,FMC_SDCKE0,,,EVENTOUT,ADC12_IN15 +PortC,PC6,,,TIM3_CH1,TIM8_CH1,,I2S2_MCK,,DFSDM1_CKIN3,USART6_TX,FMC_NWAIT,SDMMC2_D6,,SDMMC1_D6,DCMI_D0,LCD_HSYNC,EVENTOUT, +PortC,PC7,,,TIM3_CH2,TIM8_CH2,,,I2S3_MCK,DFSDM1_DATAIN3,USART6_RX,FMC_NE1,SDMMC2_D7,,SDMMC1_D7,DCMI_D1,LCD_G6,EVENTOUT, +PortC,PC8,TRACED1,,TIM3_CH3,TIM8_CH3,,,,UART5_RTS,USART6_CK,FMC_NE2/FMC_NCE,,,SDMMC1_D0,DCMI_D2,,EVENTOUT, +PortC,PC9,MCO2,,TIM3_CH4,TIM8_CH4,I2C3_SDA,I2S_CKIN,,UART5_CTS,,QUADSPI_BK1_IO0,LCD_G3,,SDMMC1_D1,DCMI_D3,LCD_B2,EVENTOUT, +PortC,PC10,,,,DFSDM1_CKIN5,,,SPI3_SCK/I2S3_CK,USART3_TX,UART4_TX,QUADSPI_BK1_IO1,,,SDMMC1_D2,DCMI_D8,LCD_R2,EVENTOUT, +PortC,PC11,,,,DFSDM1_DATAIN5,,,SPI3_MISO,USART3_RX,UART4_RX,QUADSPI_BK2_NCS,,,SDMMC1_D3,DCMI_D4,,EVENTOUT, +PortC,PC12,TRACED3,,,,,,SPI3_MOSI/I2S3_SD,USART3_CK,UART5_TX,,,,SDMMC1_CK,DCMI_D9,,EVENTOUT, +PortC,PC13,,,,,,,,,,,,,,,,EVENTOUT, +PortC,PC14,,,,,,,,,,,,,,,,EVENTOUT, +PortC,PC15,,,,,,,,,,,,,,,,EVENTOUT, +PortD,PD0,,,,DFSDM1_CKIN6,,,DFSDM1_DATAIN7,,UART4_RX,CAN1_RX,,,FMC_D2,,,EVENTOUT, +PortD,PD1,,,,DFSDM1_DATAIN6,,,DFSDM1_CKIN7,,UART4_TX,CAN1_TX,,,FMC_D3,,,EVENTOUT, +PortD,PD2,TRACED2,,TIM3_ETR,,,,,,UART5_RX,,,,SDMMC1_CMD,DCMI_D11,,EVENTOUT, +PortD,PD3,,,,DFSDM1_CKOUT,,SPI2_SCK/I2S2_CK,DFSDM1_DATAIN0,USART2_CTS,,,,,FMC_CLK,DCMI_D5,LCD_G7,EVENTOUT, +PortD,PD4,,,,,,,DFSDM1_CKIN0,USART2_RTS,,,,,FMC_NOE,,,EVENTOUT, +PortD,PD5,,,,,,,,USART2_TX,,,,,FMC_NWE,,,EVENTOUT, +PortD,PD6,,,,DFSDM1_CKIN4,,SPI3_MOSI/I2S3_SD,SAI1_SD_A,USART2_RX,,,DFSDM1_DATAIN1,SDMMC2_CK,FMC_NWAIT,DCMI_D10,LCD_B2,EVENTOUT, +PortD,PD7,,,,DFSDM1_DATAIN4,,SPI1_MOSI/I2S1_SD,DFSDM1_CKIN1,USART2_CK,SPDIFRX_IN0,,,SDMMC2_CMD,FMC_NE1,,,EVENTOUT, +PortD,PD8,,,,DFSDM1_CKIN3,,,,USART3_TX,SPDIFRX_IN1,,,,FMC_D13,,,EVENTOUT, +PortD,PD9,,,,DFSDM1_DATAIN3,,,,USART3_RX,,,,,FMC_D14,,,EVENTOUT, +PortD,PD10,,,,DFSDM1_CKOUT,,,,USART3_CK,,,,,FMC_D15,,LCD_B3,EVENTOUT, +PortD,PD11,,,,,I2C4_SMBA,,,USART3_CTS,,QUADSPI_BK1_IO0,SAI2_SD_A,,FMC_A16/FMC_CLE,,,EVENTOUT, +PortD,PD12,,,TIM4_CH1,LPTIM1_IN1,I2C4_SCL,,,USART3_RTS,,QUADSPI_BK1_IO1,SAI2_FS_A,,FMC_A17/FMC_ALE,,,EVENTOUT, +PortD,PD13,,,TIM4_CH2,LPTIM1_OUT,I2C4_SDA,,,,,QUADSPI_BK1_IO3,SAI2_SCK_A,,FMC_A18,,,EVENTOUT, +PortD,PD14,,,TIM4_CH3,,,,,,UART8_CTS,,,,FMC_D0,,,EVENTOUT, +PortD,PD15,,,TIM4_CH4,,,,,,UART8_RTS,,,,FMC_D1,,,EVENTOUT, +PortE,PE0,,,TIM4_ETR,LPTIM1_ETR,,,,,UART8_RX,,SAI2_MCK_A,,FMC_NBL0,DCMI_D2,,EVENTOUT, +PortE,PE1,,,,LPTIM1_IN2,,,,,UART8_TX,,,,FMC_NBL1,DCMI_D3,,EVENTOUT, +PortE,PE2,TRACECLK,,,,,SPI4_SCK,SAI1_MCLK_A,,,QUADSPI_BK1_IO2,,ETH_MII_TXD3,FMC_A23,,,EVENTOUT, +PortE,PE3,TRACED0,,,,,,SAI1_SD_B,,,,,,FMC_A19,,,EVENTOUT, +PortE,PE4,TRACED1,,,,,SPI4_NSS,SAI1_FS_A,,,,DFSDM1_DATAIN3,,FMC_A20,DCMI_D4,LCD_B0,EVENTOUT, +PortE,PE5,TRACED2,,,TIM9_CH1,,SPI4_MISO,SAI1_SCK_A,,,,DFSDM1_CKIN3,,FMC_A21,DCMI_D6,LCD_G0,EVENTOUT, +PortE,PE6,TRACED3,TIM1_BKIN2,,TIM9_CH2,,SPI4_MOSI,SAI1_SD_A,,,,SAI2_MCK_B,,FMC_A22,DCMI_D7,LCD_G1,EVENTOUT, +PortE,PE7,,TIM1_ETR,,,,,DFSDM1_DATAIN2,,UART7_RX,,QUADSPI_BK2_IO0,,FMC_D4,,,EVENTOUT, +PortE,PE8,,TIM1_CH1N,,,,,DFSDM1_CKIN2,,UART7_TX,,QUADSPI_BK2_IO1,,FMC_D5,,,EVENTOUT, +PortE,PE9,,TIM1_CH1,,,,,DFSDM1_CKOUT,,UART7_RTS,,QUADSPI_BK2_IO2,,FMC_D6,,,EVENTOUT, +PortE,PE10,,TIM1_CH2N,,,,,DFSDM1_DATAIN4,,UART7_CTS,,QUADSPI_BK2_IO3,,FMC_D7,,,EVENTOUT, +PortE,PE11,,TIM1_CH2,,,,SPI4_NSS,DFSDM1_CKIN4,,,,SAI2_SD_B,,FMC_D8,,LCD_G3,EVENTOUT, +PortE,PE12,,TIM1_CH3N,,,,SPI4_SCK,DFSDM1_DATAIN5,,,,SAI2_SCK_B,,FMC_D9,,LCD_B4,EVENTOUT, +PortE,PE13,,TIM1_CH3,,,,SPI4_MISO,DFSDM1_CKIN5,,,,SAI2_FS_B,,FMC_D10,,LCD_DE,EVENTOUT, +PortE,PE14,,TIM1_CH4,,,,SPI4_MOSI,,,,,SAI2_MCK_B,,FMC_D11,,LCD_CLK,EVENTOUT, +PortE,PE15,,TIM1_BKIN,,,,,,,,,,,FMC_D12,,LCD_R7,EVENTOUT, +PortF,PF0,,,,,I2C2_SDA,,,,,,,,FMC_A0,,,EVENTOUT, +PortF,PF1,,,,,I2C2_SCL,,,,,,,,FMC_A1,,,EVENTOUT, +PortF,PF2,,,,,I2C2_SMBA,,,,,,,,FMC_A2,,,EVENTOUT, +PortF,PF3,,,,,,,,,,,,,FMC_A3,,,EVENTOUT,ADC3_IN9 +PortF,PF4,,,,,,,,,,,,,FMC_A4,,,EVENTOUT,ADC3_IN14 +PortF,PF5,,,,,,,,,,,,,FMC_A5,,,EVENTOUT,ADC3_IN15 +PortF,PF6,,,,TIM10_CH1,,SPI5_NSS,SAI1_SD_B,,UART7_RX,QUADSPI_BK1_IO3,,,,,,EVENTOUT,ADC3_IN4 +PortF,PF7,,,,TIM11_CH1,,SPI5_SCK,SAI1_MCLK_B,,UART7_TX,QUADSPI_BK1_IO2,,,,,,EVENTOUT,ADC3_IN5 +PortF,PF8,,,,,,SPI5_MISO,SAI1_SCK_B,,UART7_RTS,TIM13_CH1,QUADSPI_BK1_IO0,,,,,EVENTOUT,ADC3_IN6 +PortF,PF9,,,,,,SPI5_MOSI,SAI1_FS_B,,UART7_CTS,TIM14_CH1,QUADSPI_BK1_IO1,,,,,EVENTOUT,ADC3_IN7 +PortF,PF10,,,,,,,,,,QUADSPI_CLK,,,,DCMI_D11,LCD_DE,EVENTOUT,ADC3_IN8 +PortF,PF11,,,,,,SPI5_MOSI,,,,,SAI2_SD_B,,FMC_SDNRAS,DCMI_D12,,EVENTOUT, +PortF,PF12,,,,,,,,,,,,,FMC_A6,,,EVENTOUT, +PortF,PF13,,,,,I2C4_SMBA,,DFSDM1_DATAIN6,,,,,,FMC_A7,,,EVENTOUT, +PortF,PF14,,,,,I2C4_SCL,,DFSDM1_CKIN6,,,,,,FMC_A8,,,EVENTOUT, +PortF,PF15,,,,,I2C4_SDA,,,,,,,,FMC_A9,,,EVENTOUT, +PortG,PG0,,,,,,,,,,,,,FMC_A10,,,EVENTOUT, +PortG,PG1,,,,,,,,,,,,,FMC_A11,,,EVENTOUT, +PortG,PG2,,,,,,,,,,,,,FMC_A12,,,EVENTOUT, +PortG,PG3,,,,,,,,,,,,,FMC_A13,,,EVENTOUT, +PortG,PG4,,,,,,,,,,,,,FMC_A14/FMC_BA0,,,EVENTOUT, +PortG,PG5,,,,,,,,,,,,,FMC_A15/FMC_BA1,,,EVENTOUT, +PortG,PG6,,,,,,,,,,,,,FMC_NE3,DCMI_D12,LCD_R7,EVENTOUT, +PortG,PG7,,,,,,,SAI1_MCLK_A,,USART6_CK,,,,FMC_INT,DCMI_D13,LCD_CLK,EVENTOUT, +PortG,PG8,,,,,,SPI6_NSS,,SPDIFRX_IN2,USART6_RTS,,,ETH_PPS_OUT,FMC_SDCLK,,LCD_G7,EVENTOUT, +PortG,PG9,,,,,,SPI1_MISO,,SPDIFRX_IN3,USART6_RX,QUADSPI_BK2_IO2,SAI2_FS_B,SDMMC2_D0,FMC_NE2/FMC_NCE,DCMI_VSYNC,,EVENTOUT, +PortG,PG10,,,,,,SPI1_NSS/I2S1_WS,,,,LCD_G3,SAI2_SD_B,SDMMC2_D1,FMC_NE3,DCMI_D2,LCD_B2,EVENTOUT, +PortG,PG11,,,,,,SPI1_SCK/I2S1_CK,,SPDIFRX_IN0,,,SDMMC2_D2,ETH_MII_TX_EN/ETH_RMII_TX_EN,,DCMI_D3,LCD_B3,EVENTOUT, +PortG,PG12,,,,LPTIM1_IN1,,SPI6_MISO,,SPDIFRX_IN1,USART6_RTS,LCD_B4,,SDMMC2_D3,FMC_NE4,,LCD_B1,EVENTOUT, +PortG,PG13,TRACED0,,,LPTIM1_OUT,,SPI6_SCK,,,USART6_CTS,,,ETH_MII_TXD0/ETH_RMII_TXD0,FMC_A24,,LCD_R0,EVENTOUT, +PortG,PG14,TRACED1,,,LPTIM1_ETR,,SPI6_MOSI,,,USART6_TX,QUADSPI_BK2_IO3,,ETH_MII_TXD1/ETH_RMII_TXD1,FMC_A25,,LCD_B0,EVENTOUT, +PortG,PG15,,,,,,,,,USART6_CTS,,,,FMC_SDNCAS,DCMI_D13,,EVENTOUT, +PortH,PH0,,,,,,,,,,,,,,,,EVENTOUT, +PortH,PH1,,,,,,,,,,,,,,,,EVENTOUT, +PortH,PH2,,,,LPTIM1_IN2,,,,,,QUADSPI_BK2_IO0,SAI2_SCK_B,ETH_MII_CRS,FMC_SDCKE0,,LCD_R0,EVENTOUT, +PortH,PH3,,,,,,,,,,QUADSPI_BK2_IO1,SAI2_MCK_B,ETH_MII_COL,FMC_SDNE0,,LCD_R1,EVENTOUT, +PortH,PH4,,,,,I2C2_SCL,,,,,LCD_G5,OTG_HS_ULPI_NXT,,,,LCD_G4,EVENTOUT, +PortH,PH5,,,,,I2C2_SDA,SPI5_NSS,,,,,,,FMC_SDNWE,,,EVENTOUT, +PortH,PH6,,,,,I2C2_SMBA,SPI5_SCK,,,,TIM12_CH1,,ETH_MII_RXD2,FMC_SDNE1,DCMI_D8,,EVENTOUT, +PortH,PH7,,,,,I2C3_SCL,SPI5_MISO,,,,,,ETH_MII_RXD3,FMC_SDCKE1,DCMI_D9,,EVENTOUT, +PortH,PH8,,,,,I2C3_SDA,,,,,,,,FMC_D16,DCMI_HSYNC,LCD_R2,EVENTOUT, +PortH,PH9,,,,,I2C3_SMBA,,,,,TIM12_CH2,,,FMC_D17,DCMI_D0,LCD_R3,EVENTOUT, +PortH,PH10,,,TIM5_CH1,,I2C4_SMBA,,,,,,,,FMC_D18,DCMI_D1,LCD_R4,EVENTOUT, +PortH,PH11,,,TIM5_CH2,,I2C4_SCL,,,,,,,,FMC_D19,DCMI_D2,LCD_R5,EVENTOUT, +PortH,PH12,,,TIM5_CH3,,I2C4_SDA,,,,,,,,FMC_D20,DCMI_D3,LCD_R6,EVENTOUT, +PortH,PH13,,,,TIM8_CH1N,,,,,UART4_TX,CAN1_TX,,,FMC_D21,,LCD_G2,EVENTOUT, +PortH,PH14,,,,TIM8_CH2N,,,,,UART4_RX,CAN1_RX,,,FMC_D22,DCMI_D4,LCD_G3,EVENTOUT, +PortH,PH15,,,,TIM8_CH3N,,,,,,,,,FMC_D23,DCMI_D11,LCD_G4,EVENTOUT, +PortI,PI0,,,TIM5_CH4,,,SPI2_NSS/I2S2_WS,,,,,,,FMC_D24,DCMI_D13,LCD_G5,EVENTOUT, +PortI,PI1,,,,TIM8_BKIN2,,SPI2_SCK/I2S2_CK,,,,,,,FMC_D25,DCMI_D8,LCD_G6,EVENTOUT, +PortI,PI2,,,,TIM8_CH4,,SPI2_MISO,,,,,,,FMC_D26,DCMI_D9,LCD_G7,EVENTOUT, +PortI,PI3,,,,TIM8_ETR,,SPI2_MOSI/I2S2_SD,,,,,,,FMC_D27,DCMI_D10,,EVENTOUT, +PortI,PI4,,,,TIM8_BKIN,,,,,,,SAI2_MCK_A,,FMC_NBL2,DCMI_D5,LCD_B4,EVENTOUT, +PortI,PI5,,,,TIM8_CH1,,,,,,,SAI2_SCK_A,,FMC_NBL3,DCMI_VSYNC,LCD_B5,EVENTOUT, +PortI,PI6,,,,TIM8_CH2,,,,,,,SAI2_SD_A,,FMC_D28,DCMI_D6,LCD_B6,EVENTOUT, +PortI,PI7,,,,TIM8_CH3,,,,,,,SAI2_FS_A,,FMC_D29,DCMI_D7,LCD_B7,EVENTOUT, +PortI,PI8,,,,,,,,,,,,,,,,EVENTOUT, +PortI,PI9,,,,,,,,,UART4_RX,CAN1_RX,,,FMC_D30,,LCD_VSYNC,EVENTOUT, +PortI,PI10,,,,,,,,,,,,ETH_MII_RX_ER,FMC_D31,,LCD_HSYNC,EVENTOUT, +PortI,PI11,,,,,,,,,,LCD_G6,OTG_HS_ULPI_DIR,,,,,EVENTOUT, +PortI,PI12,,,,,,,,,,,,,,,LCD_HSYNC,EVENTOUT, +PortI,PI13,,,,,,,,,,,,,,,LCD_VSYNC,EVENTOUT, +PortI,PI14,,,,,,,,,,,,,,,LCD_CLK,EVENTOUT, +PortI,PI15,,,,,,,,,,LCD_G2,,,,,LCD_R0,EVENTOUT, +PortJ,PJ0,,,,,,,,,,LCD_R7,,,,,LCD_R1,EVENTOUT, +PortJ,PJ1,,,,,,,,,,,,,,,LCD_R2,EVENTOUT, +PortJ,PJ2,,,,,,,,,,,,,,DSI_TE,LCD_R3,EVENTOUT, +PortJ,PJ3,,,,,,,,,,,,,,,LCD_R4,EVENTOUT, +PortJ,PJ4,,,,,,,,,,,,,,,LCD_R5,EVENTOUT, +PortJ,PJ5,,,,,,,,,,,,,,,LCD_R6,EVENTOUT, +PortJ,PJ6,,,,,,,,,,,,,,,LCD_R7,EVENTOUT, +PortJ,PJ7,,,,,,,,,,,,,,,LCD_G0,EVENTOUT, +PortJ,PJ8,,,,,,,,,,,,,,,LCD_G1,EVENTOUT, +PortJ,PJ9,,,,,,,,,,,,,,,LCD_G2,EVENTOUT, +PortJ,PJ10,,,,,,,,,,,,,,,LCD_G3,EVENTOUT, +PortJ,PJ11,,,,,,,,,,,,,,,LCD_G4,EVENTOUT, +PortJ,PJ12,,,,,,,,,,LCD_G3,,,,,LCD_B0,EVENTOUT, +PortJ,PJ13,,,,,,,,,,LCD_G4,,,,,LCD_B1,EVENTOUT, +PortJ,PJ14,,,,,,,,,,,,,,,LCD_B2,EVENTOUT, +PortJ,PJ15,,,,,,,,,,,,,,,LCD_B3,EVENTOUT, +PortK,PK0,,,,,,,,,,,,,,,LCD_G5,EVENTOUT, +PortK,PK1,,,,,,,,,,,,,,,LCD_G6,EVENTOUT, +PortK,PK2,,,,,,,,,,,,,,,LCD_G7,EVENTOUT, +PortK,PK3,,,,,,,,,,,,,,,LCD_B4,EVENTOUT, +PortK,PK4,,,,,,,,,,,,,,,LCD_B5,EVENTOUT, +PortK,PK5,,,,,,,,,,,,,,,LCD_B6,EVENTOUT, +PortK,PK6,,,,,,,,,,,,,,,LCD_B7,EVENTOUT, +PortK,PK7,,,,,,,,,,,,,,,LCD_DE,EVENTOUT, diff --git a/ports/stm32/boards/stm32f769.ld b/ports/stm32/boards/stm32f769.ld index c4cabe7a4..d6da43943 100644 --- a/ports/stm32/boards/stm32f769.ld +++ b/ports/stm32/boards/stm32f769.ld @@ -22,9 +22,6 @@ _minimum_heap_size = 16K; aligned for a call. */ _estack = ORIGIN(RAM) + LENGTH(RAM); -/* define common sections and symbols */ -INCLUDE common.ld - /* RAM extents for the garbage collector */ _ram_start = ORIGIN(RAM); _ram_end = ORIGIN(RAM) + LENGTH(RAM); diff --git a/ports/stm32/boards/stm32h743.ld b/ports/stm32/boards/stm32h743.ld new file mode 100644 index 000000000..77bbfacb1 --- /dev/null +++ b/ports/stm32/boards/stm32h743.ld @@ -0,0 +1,29 @@ +/* + GNU linker script for STM32H743 +*/ + +/* Specify the memory areas */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K + FLASH_ISR (rx) : ORIGIN = 0x08000000, LENGTH = 128K /* sector 0, 128K */ + FLASH_FS (r) : ORIGIN = 0x08020000, LENGTH = 128K /* sector 1, 128K */ + FLASH_TEXT (rx) : ORIGIN = 0x08040000, LENGTH = 1792K /* sectors 6*128 + 8*128 */ + DTCM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K /* Used for storage cache */ + RAM (xrw) : ORIGIN = 0x24000000, LENGTH = 512K /* AXI SRAM */ +} + +/* produce a link error if there is not this amount of RAM for these sections */ +_minimum_stack_size = 2K; +_minimum_heap_size = 16K; + +/* Define tho top end of the stack. The stack is full descending so begins just + above last byte of RAM. Note that EABI requires the stack to be 8-byte + aligned for a call. */ +_estack = ORIGIN(RAM) + LENGTH(RAM); + +/* RAM extents for the garbage collector */ +_ram_start = ORIGIN(RAM); +_ram_end = ORIGIN(RAM) + LENGTH(RAM); +_heap_start = _ebss; /* heap starts just after statically allocated memory */ +_heap_end = 0x2407C000; /* tunable */ diff --git a/ports/stm32/boards/stm32h743_af.csv b/ports/stm32/boards/stm32h743_af.csv new file mode 100644 index 000000000..d008ba68b --- /dev/null +++ b/ports/stm32/boards/stm32h743_af.csv @@ -0,0 +1,170 @@ +Port,,AF0,AF1,AF2,AF3,AF4,AF5,AF6,AF7,AF8,AF9,AF10,AF11,AF12,AF13,AF14,AF15, +,,SYS,TIM1/2/16/17/LPTIM1/HRTIM1,SAI1/TIM3/4/5/12/HRTIM1,LPUART/TIM8/LPTIM2/3/4/5/HRTIM1/DFSDM,I2C1/2/3/4/USART1/TIM15/LPTIM2/DFSDM/CEC,SPI1/2/3/4/5/6/CEC,SPI2/3/SAI1/3/I2C4/UART4/DFSDM,SPI2/3/6/USART1/2/3/6/UART7/SDMMC1,SPI6/SAI2/4/UART4/5/8/LPUART/SDMMC1/SPDIFRX,SAI4/FDCAN1/2/TIM13/14/QUADSPI/FMC/SDMMC2/LCD/SPDIFRX,SAI2/4/TIM8/QUADSPI/SDMMC2/OTG1_HS/OTG2_FS/LCD,I2C4/UART7/SWPMI1/TIM1/8/DFSDM/SDMMC2/MDIOS/ETH,TIM1/8/FMC/SDMMC1/MDIOS/OTG1_FS/LCD,TIM1/DCMI/LCD/COMP,UART5/LCD,SYS,ADC +PortA,PA0,,TIM2_CH1/TIM2_ETR,TIM5_CH1,TIM8_ETR,TIM15_BKIN,,,USART2_CTS/USART2_NSS,UART4_TX,SDMMC2_CMD,SAI2_SD_B,ETH_MII_CRS,,,,EVENTOUT, +PortA,PA1,,TIM2_CH2,TIM5_CH2,LPTIM3_OUT,TIM15_CH1N,,,USART2_RTS,UART4_RX,QUADSPI_BK1_IO3,SAI2_MCK_B,ETH_MII_RX_CLK/ETH_RMII_REF_CLK,,,LCD_R2,EVENTOUT, +PortA,PA2,,TIM2_CH3,TIM5_CH3,LPTIM4_OUT,TIM15_CH1,,,USART2_TX,SAI2_SCK_B,,,ETH_MDIO,MDIOS_MDIO,,LCD_R1,EVENTOUT, +PortA,PA3,,TIM2_CH4,TIM5_CH4,LPTIM5_OUT,TIM15_CH2,,,USART2_RX,,LCD_B2,OTG_HS_ULPI_D0,ETH_MII_COL,,,LCD_B5,EVENTOUT, +PortA,PA4,,,TIM5_ETR,,,SPI1_NSS/I2S1_WS,SPI3_NSS/I2S3_WS,USART2_CK,SPI6_NSS,,,,OTG_HS_SOF,DCMI_HSYNC,LCD_VSYNC,EVENTOUT, +PortA,PA5,,TIM2_CH1/TIM2_ETR,,TIM8_CH1N,,SPI1_SCK/I2S1_CK,,,SPI6_SCK,,OTG_HS_ULPI_CK,,,,LCD_R4,EVENTOUT, +PortA,PA6,,TIM1_BKIN,TIM3_CH1,TIM8_BKIN,,SPI1_MISO/I2S1_SDI,,,SPI6_MISO,TIM13_CH1,TIM8_BKIN_COMP12,MDIOS_MDC,TIM1_BKIN_COMP12,DCMI_PIXCLK,LCD_G2,EVENTOUT, +PortA,PA7,,TIM1_CH1N,TIM3_CH2,TIM8_CH1N,,SPI1_MOSI/I2S1_SDO,,,SPI6_MOSI,TIM14_CH1,,ETH_MII_RX_DV/ETH_RMII_CRS_DV,FMC_SDNWE,,,EVENTOUT, +PortA,PA8,MCO1,TIM1_CH1,HRTIM_CHB2,TIM8_BKIN2,I2C3_SCL,,,USART1_CK,,,OTG_FS_SOF,UART7_RX,TIM8_BKIN2_COMP12,LCD_B3,LCD_R6,EVENTOUT, +PortA,PA9,,TIM1_CH2,HRTIM_CHC1,LPUART1_TX,I2C3_SMBA,SPI2_SCK/I2S2_CK,,USART1_TX,,CAN1_RXFD,,ETH_TX_ER,,DCMI_D0,LCD_R5,EVENTOUT, +PortA,PA10,,TIM1_CH3,HRTIM_CHC2,LPUART1_RX,,,,USART1_RX,,CAN1_TXFD,OTG_FS_ID,MDIOS_MDIO,LCD_B4,DCMI_D1,LCD_B1,EVENTOUT, +PortA,PA11,,TIM1_CH4,HRTIM_CHD1,LPUART1_CTS,,SPI2_NSS/I2S2_WS,UART4_RX,USART1_CTS/USART1_NSS,,CAN1_RX,OTG_FS_DM,,,,LCD_R4,EVENTOUT, +PortA,PA12,,TIM1_ETR,HRTIM_CHD2,LPUART1_RTS,,SPI2_SCK/I2S2_CK,UART4_TX,USART1_RTS,SAI2_FS_B,CAN1_TX,OTG_FS_DP,,,,LCD_R5,EVENTOUT, +PortA,PA13,JTMS/SWDIO,,,,,,,,,,,,,,,EVENTOUT, +PortA,PA14,JTCK/SWCLK,,,,,,,,,,,,,,,EVENTOUT, +PortA,PA15,JTDI,TIM2_CH1/TIM2_ETR,HRTIM_FLT1,,HDMI_CEC,SPI1_NSS/I2S1_WS,SPI3_NSS/I2S3_WS,SPI6_NSS,UART4_RTS,,,UART7_TX,,,,EVENTOUT, +PortB,PB0,,TIM1_CH2N,TIM3_CH3,TIM8_CH2N,,,DFSDM_CKOUT,,UART4_CTS,LCD_R3,OTG_HS_ULPI_D1,ETH_MII_RXD2,,,LCD_G1,EVENTOUT, +PortB,PB1,,TIM1_CH3N,TIM3_CH4,TIM8_CH3N,,,DFSDM_DATIN1,,,LCD_R6,OTG_HS_ULPI_D2,ETH_MII_RXD3,,,LCD_G0,EVENTOUT, +PortB,PB2,,,SAI1_D1,,DFSDM_CKIN1,,SAI1_SD_A,SPI3_MOSI/I2S3_SDO,SAI4_SD_A,QUADSPI_CLK,SAI4_D1,ETH_TX_ER,,,,EVENTOUT, +PortB,PB3,JTDO/TRACESWO,TIM2_CH2,HRTIM_FLT4,,,SPI1_SCK/I2S1_CK,SPI3_SCK/I2S3_CK,,SPI6_SCK,SDMMC2_D2,,UART7_RX,,,,EVENTOUT, +PortB,PB4,NJTRST,TIM16_BKIN,TIM3_CH1,HRTIM_EEV6,,SPI1_MISO/I2S1_SDI,SPI3_MISO/I2S3_SDI,SPI2_NSS/I2S2_WS,SPI6_MISO,SDMMC2_D3,,UART7_TX,,,,EVENTOUT, +PortB,PB5,,TIM17_BKIN,TIM3_CH2,HRTIM_EEV7,I2C1_SMBA,SPI1_MOSI/I2S1_SDO,I2C4_SMBA,SPI3_MOSI/I2S3_SDO,SPI6_MOSI,CAN2_RX,OTG_HS_ULPI_D7,ETH_PPS_OUT,FMC_SDCKE1,DCMI_D10,UART5_RX,EVENTOUT, +PortB,PB6,,TIM16_CH1N,TIM4_CH1,HRTIM_EEV8,I2C1_SCL,HDMI_CEC,I2C4_SCL,USART1_TX,LPUART1_TX,CAN2_TX,QUADSPI_BK1_NCS,DFSDM_DATIN5,FMC_SDNE1,DCMI_D5,UART5_TX,EVENTOUT, +PortB,PB7,,TIM17_CH1N,TIM4_CH2,HRTIM_EEV9,I2C1_SDA,,I2C4_SDA,USART1_RX,LPUART1_RX,CAN2_TXFD,,DFSDM_CKIN5,FMC_NL,DCMI_VSYNC,,EVENTOUT, +PortB,PB8,,TIM16_CH1,TIM4_CH3,DFSDM_CKIN7,I2C1_SCL,,I2C4_SCL,SDMMC1_CKIN,UART4_RX,CAN1_RX,SDMMC2_D4,ETH_MII_TXD3,SDMMC1_D4,DCMI_D6,LCD_B6,EVENTOUT, +PortB,PB9,,TIM17_CH1,TIM4_CH4,DFSDM_DATIN7,I2C1_SDA,SPI2_NSS/I2S2_WS,I2C4_SDA,SDMMC1_CDIR,UART4_TX,CAN1_TX,SDMMC2_D5,I2C4_SMBA,SDMMC1_D5,DCMI_D7,LCD_B7,EVENTOUT, +PortB,PB10,,TIM2_CH3,HRTIM_SCOUT,LPTIM2_IN1,I2C2_SCL,SPI2_SCK/I2S2_CK,DFSDM_DATIN7,USART3_TX,,QUADSPI_BK1_NCS,OTG_HS_ULPI_D3,ETH_MII_RX_ER,,,LCD_G4,EVENTOUT, +PortB,PB11,,TIM2_CH4,HRTIM_SCIN,LPTIM2_ETR,I2C2_SDA,,DFSDM_CKIN7,USART3_RX,,,OTG_HS_ULPI_D4,ETH_MII_TX_EN/ETH_RMII_TX_EN,,,LCD_G5,EVENTOUT, +PortB,PB12,,TIM1_BKIN,,,I2C2_SMBA,SPI2_NSS/I2S2_WS,DFSDM_DATIN1,USART3_CK,,CAN2_RX,OTG_HS_ULPI_D5,ETH_MII_TXD0/ETH_RMII_TXD0,OTG_HS_ID,TIM1_BKIN_COMP12,UART5_RX,EVENTOUT, +PortB,PB13,,TIM1_CH1N,,LPTIM2_OUT,,SPI2_SCK/I2S2_CK,DFSDM_CKIN1,USART3_CTS/USART3_NSS,,CAN2_TX,OTG_HS_ULPI_D6,ETH_MII_TXD1/ETH_RMII_TXD1,,,UART5_TX,EVENTOUT, +PortB,PB14,,TIM1_CH2N,TIM12_CH1,TIM8_CH2N,USART1_TX,SPI2_MISO/I2S2_SDI,DFSDM_DATIN2,USART3_RTS,UART4_RTS,SDMMC2_D0,,,OTG_HS_DM,,,EVENTOUT, +PortB,PB15,RTC_REFIN,TIM1_CH3N,TIM12_CH2,TIM8_CH3N,USART1_RX,SPI2_MOSI/I2S2_SDO,DFSDM_CKIN2,,UART4_CTS,SDMMC2_D1,,,OTG_HS_DP,,,EVENTOUT, +PortC,PC0,,,,DFSDM_CKIN0,,,DFSDM_DATIN4,,SAI2_FS_B,,OTG_HS_ULPI_STP,,FMC_SDNWE,,LCD_R5,EVENTOUT, +PortC,PC1,TRACED0,,SAI1_D1,DFSDM_DATIN0,DFSDM_CKIN4,SPI2_MOSI/I2S2_SDO,SAI1_SD_A,,SAI4_SD_A,SDMMC2_CK,SAI4_D1,ETH_MDC,MDIOS_MDC,,,EVENTOUT, +PortC,PC2,,,,DFSDM_CKIN1,,SPI2_MISO/I2S2_SDI,DFSDM_CKOUT,,,,OTG_HS_ULPI_DIR,ETH_MII_TXD2,FMC_SDNE0,,,EVENTOUT, +PortC,PC3,,,,DFSDM_DATIN1,,SPI2_MOSI/I2S2_SDO,,,,,OTG_HS_ULPI_NXT,ETH_MII_TX_CLK,FMC_SDCKE0,,,EVENTOUT, +PortC,PC4,,,,DFSDM_CKIN2,,I2S1_MCK,,,,SPDIFRX_IN2,,ETH_MII_RXD0/ETH_RMII_RXD0,FMC_SDNE0,,,EVENTOUT, +PortC,PC5,,,SAI1_D3,DFSDM_DATIN2,,,,,,SPDIFRX_IN3,SAI4_D3,ETH_MII_RXD1/ETH_RMII_RXD1,FMC_SDCKE0,COMP_1_OUT,,EVENTOUT, +PortC,PC6,,HRTIM_CHA1,TIM3_CH1,TIM8_CH1,DFSDM_CKIN3,I2S2_MCK,,USART6_TX,SDMMC1_D0DIR,FMC_NWAIT,SDMMC2_D6,,SDMMC1_D6,DCMI_D0,LCD_HSYNC,EVENTOUT, +PortC,PC7,TRGIO,HRTIM_CHA2,TIM3_CH2,TIM8_CH2,DFSDM_DATIN3,,I2S3_MCK,USART6_RX,SDMMC1_D123DIR,FMC_NE1,SDMMC2_D7,SWPMI_TX,SDMMC1_D7,DCMI_D1,LCD_G6,EVENTOUT, +PortC,PC8,TRACED1,HRTIM_CHB1,TIM3_CH3,TIM8_CH3,,,,USART6_CK,UART5_RTS,FMC_NE2/FMC_NCE,,SWPMI_RX,SDMMC1_D0,DCMI_D2,,EVENTOUT, +PortC,PC9,MCO2,,TIM3_CH4,TIM8_CH4,I2C3_SDA,I2S_CKIN,,,UART5_CTS,QUADSPI_BK1_IO0,LCD_G3,SWPMI_SUSPEND,SDMMC1_D1,DCMI_D3,LCD_B2,EVENTOUT, +PortC,PC10,,,HRTIM_EEV1,DFSDM_CKIN5,,,SPI3_SCK/I2S3_CK,USART3_TX,UART4_TX,QUADSPI_BK1_IO1,,,SDMMC1_D2,DCMI_D8,LCD_R2,EVENTOUT, +PortC,PC11,,,HRTIM_FLT2,DFSDM_DATIN5,,,SPI3_MISO/I2S3_SDI,USART3_RX,UART4_RX,QUADSPI_BK2_NCS,,,SDMMC1_D3,DCMI_D4,,EVENTOUT, +PortC,PC12,TRACED3,,HRTIM_EEV2,,,,SPI3_MOSI/I2S3_SDO,USART3_CK,UART5_TX,,,,SDMMC1_CK,DCMI_D9,,EVENTOUT, +PortC,PC13,,,,,,,,,,,,,,,,EVENTOUT, +PortC,PC14,,,,,,,,,,,,,,,,EVENTOUT, +PortC,PC15,,,,,,,,,,,,,,,,EVENTOUT, +PortD,PD0,,,,DFSDM_CKIN6,,,SAI3_SCK_A,,UART4_RX,CAN1_RX,,,FMC_D2/FMC_DA2,,,EVENTOUT, +PortD,PD1,,,,DFSDM_DATIN6,,,SAI3_SD_A,,UART4_TX,CAN1_TX,,,FMC_D3/FMC_DA3,,,EVENTOUT, +PortD,PD2,TRACED2,,TIM3_ETR,,,,,,UART5_RX,,,,SDMMC1_CMD,DCMI_D11,,EVENTOUT, +PortD,PD3,,,,DFSDM_CKOUT,,SPI2_SCK/I2S2_CK,,USART2_CTS/USART2_NSS,,,,,FMC_CLK,DCMI_D5,LCD_G7,EVENTOUT, +PortD,PD4,,,HRTIM_FLT3,,,,SAI3_FS_A,USART2_RTS,,CAN1_RXFD,,,FMC_NOE,,,EVENTOUT, +PortD,PD5,,,HRTIM_EEV3,,,,,USART2_TX,,CAN1_TXFD,,,FMC_NWE,,,EVENTOUT, +PortD,PD6,,,SAI1_D1,DFSDM_CKIN4,DFSDM_DATIN1,SPI3_MOSI/I2S3_SDO,SAI1_SD_A,USART2_RX,SAI4_SD_A,CAN2_RXFD,SAI4_D1,SDMMC2_CK,FMC_NWAIT,DCMI_D10,LCD_B2,EVENTOUT, +PortD,PD7,,,,DFSDM_DATIN4,,SPI1_MOSI/I2S1_SDO,DFSDM_CKIN1,USART2_CK,,SPDIFRX_IN0,,SDMMC2_CMD,FMC_NE1,,,EVENTOUT, +PortD,PD8,,,,DFSDM_CKIN3,,,SAI3_SCK_B,USART3_TX,,SPDIFRX_IN1,,,FMC_D13/FMC_DA13,,,EVENTOUT, +PortD,PD9,,,,DFSDM_DATIN3,,,SAI3_SD_B,USART3_RX,,CAN2_RXFD,,,FMC_D14/FMC_DA14,,,EVENTOUT, +PortD,PD10,,,,DFSDM_CKOUT,,,SAI3_FS_B,USART3_CK,,CAN2_TXFD,,,FMC_D15/FMC_DA15,,LCD_B3,EVENTOUT, +PortD,PD11,,,,LPTIM2_IN2,I2C4_SMBA,,,USART3_CTS/USART3_NSS,,QUADSPI_BK1_IO0,SAI2_SD_A,,FMC_A16,,,EVENTOUT, +PortD,PD12,,LPTIM1_IN1,TIM4_CH1,LPTIM2_IN1,I2C4_SCL,,,USART3_RTS,,QUADSPI_BK1_IO1,SAI2_FS_A,,FMC_A17,,,EVENTOUT, +PortD,PD13,,LPTIM1_OUT,TIM4_CH2,,I2C4_SDA,,,,,QUADSPI_BK1_IO3,SAI2_SCK_A,,FMC_A18,,,EVENTOUT, +PortD,PD14,,,TIM4_CH3,,,,SAI3_MCLK_B,,UART8_CTS,,,,FMC_D0/FMC_DA0,,,EVENTOUT, +PortD,PD15,,,TIM4_CH4,,,,SAI3_MCLK_A,,UART8_RTS,,,,FMC_D1/FMC_DA1,,,EVENTOUT, +PortE,PE0,,LPTIM1_ETR,TIM4_ETR,HRTIM_SCIN,LPTIM2_ETR,,,,UART8_RX,CAN1_RXFD,SAI2_MCK_A,,FMC_NBL0,DCMI_D2,,EVENTOUT, +PortE,PE1,,LPTIM1_IN2,,HRTIM_SCOUT,,,,,UART8_TX,CAN1_TXFD,,,FMC_NBL1,DCMI_D3,,EVENTOUT, +PortE,PE2,TRACECLK,,SAI1_CK1,,,SPI4_SCK,SAI1_MCLK_A,,SAI4_MCLK_A,QUADSPI_BK1_IO2,SAI4_CK1,ETH_MII_TXD3,FMC_A23,,,EVENTOUT, +PortE,PE3,TRACED0,,,,TIM15_BKIN,,SAI1_SD_B,,SAI4_SD_B,,,,FMC_A19,,,EVENTOUT, +PortE,PE4,TRACED1,,SAI1_D2,DFSDM_DATIN3,TIM15_CH1N,SPI4_NSS,SAI1_FS_A,,SAI4_FS_A,,SAI4_D2,,FMC_A20,DCMI_D4,LCD_B0,EVENTOUT, +PortE,PE5,TRACED2,,SAI1_CK2,DFSDM_CKIN3,TIM15_CH1,SPI4_MISO,SAI1_SCK_A,,SAI4_SCK_A,,SAI4_CK2,,FMC_A21,DCMI_D6,LCD_G0,EVENTOUT, +PortE,PE6,TRACED3,TIM1_BKIN2,SAI1_D1,,TIM15_CH2,SPI4_MOSI,SAI1_SD_A,,SAI4_SD_A,SAI4_D1,SAI2_MCK_B,TIM1_BKIN2_COMP12,FMC_A22,DCMI_D7,LCD_G1,EVENTOUT, +PortE,PE7,,TIM1_ETR,,DFSDM_DATIN2,,,,UART7_RX,,,QUADSPI_BK2_IO0,,FMC_D4/FMC_DA4,,,EVENTOUT, +PortE,PE8,,TIM1_CH1N,,DFSDM_CKIN2,,,,UART7_TX,,,QUADSPI_BK2_IO1,,FMC_D5/FMC_DA5,COMP_2_OUT,,EVENTOUT, +PortE,PE9,,TIM1_CH1,,DFSDM_CKOUT,,,,UART7_RTS,,,QUADSPI_BK2_IO2,,FMC_D6/FMC_DA6,,,EVENTOUT, +PortE,PE10,,TIM1_CH2N,,DFSDM_DATIN4,,,,UART7_CTS,,,QUADSPI_BK2_IO3,,FMC_D7/FMC_DA7,,,EVENTOUT, +PortE,PE11,,TIM1_CH2,,DFSDM_CKIN4,,SPI4_NSS,,,,,SAI2_SD_B,,FMC_D8/FMC_DA8,,LCD_G3,EVENTOUT, +PortE,PE12,,TIM1_CH3N,,DFSDM_DATIN5,,SPI4_SCK,,,,,SAI2_SCK_B,,FMC_D9/FMC_DA9,COMP_1_OUT,LCD_B4,EVENTOUT, +PortE,PE13,,TIM1_CH3,,DFSDM_CKIN5,,SPI4_MISO,,,,,SAI2_FS_B,,FMC_D10/FMC_DA10,COMP_2_OUT,LCD_DE,EVENTOUT, +PortE,PE14,,TIM1_CH4,,,,SPI4_MOSI,,,,,SAI2_MCK_B,,FMC_D11/FMC_DA11,,LCD_CLK,EVENTOUT, +PortE,PE15,,TIM1_BKIN,,,,HDMI__TIM1_BKIN,,,,,,,FMC_D12/FMC_DA12,TIM1_BKIN_COMP12,LCD_R7,EVENTOUT, +PortF,PF0,,,,,I2C2_SDA,,,,,,,,FMC_A0,,,EVENTOUT, +PortF,PF1,,,,,I2C2_SCL,,,,,,,,FMC_A1,,,EVENTOUT, +PortF,PF2,,,,,I2C2_SMBA,,,,,,,,FMC_A2,,,EVENTOUT, +PortF,PF3,,,,,,,,,,,,,FMC_A3,,,EVENTOUT, +PortF,PF4,,,,,,,,,,,,,FMC_A4,,,EVENTOUT, +PortF,PF5,,,,,,,,,,,,,FMC_A5,,,EVENTOUT, +PortF,PF6,,TIM16_CH1,,,,SPI5_NSS,SAI1_SD_B,UART7_RX,SAI4_SD_B,QUADSPI_BK1_IO3,,,,,,EVENTOUT, +PortF,PF7,,TIM17_CH1,,,,SPI5_SCK,SAI1_MCLK_B,UART7_TX,SAI4_MCLK_B,QUADSPI_BK1_IO2,,,,,,EVENTOUT, +PortF,PF8,,TIM16_CH1N,,,,SPI5_MISO,SAI1_SCK_B,UART7_RTS,SAI4_SCK_B,TIM13_CH1,QUADSPI_BK1_IO0,,,,,EVENTOUT, +PortF,PF9,,TIM17_CH1N,,,,SPI5_MOSI,SAI1_FS_B,UART7_CTS,SAI4_FS_B,TIM14_CH1,QUADSPI_BK1_IO1,,,,,EVENTOUT, +PortF,PF10,,TIM16_BKIN,SAI1_D3,,,,,,,QUADSPI_CLK,SAI4_D3,,,DCMI_D11,LCD_DE,EVENTOUT, +PortF,PF11,,,,,,SPI5_MOSI,,,,,SAI2_SD_B,,FMC_SDNRAS,DCMI_D12,,EVENTOUT, +PortF,PF12,,,,,,,,,,,,,FMC_A6,,,EVENTOUT, +PortF,PF13,,,,DFSDM_DATIN6,I2C4_SMBA,,,,,,,,FMC_A7,,,EVENTOUT, +PortF,PF14,,,,DFSDM_CKIN6,I2C4_SCL,,,,,,,,FMC_A8,,,EVENTOUT, +PortF,PF15,,,,,I2C4_SDA,,,,,,,,FMC_A9,,,EVENTOUT, +PortG,PG0,,,,,,,,,,,,,FMC_A10,,,EVENTOUT, +PortG,PG1,,,,,,,,,,,,,FMC_A11,,,EVENTOUT, +PortG,PG2,,,,TIM8_BKIN,,,,,,,,TIM8_BKIN_COMP12,FMC_A12,,,EVENTOUT, +PortG,PG3,,,,TIM8_BKIN2,,,,,,,,TIM8_BKIN2_COMP12,FMC_A13,,,EVENTOUT, +PortG,PG4,,TIM1_BKIN2,,,,,,,,,,TIM1_BKIN2_COMP12,FMC_A14/FMC_BA0,,,EVENTOUT, +PortG,PG5,,TIM1_ETR,,,,,,,,,,,FMC_A15/FMC_BA1,,,EVENTOUT, +PortG,PG6,,TIM17_BKIN,HRTIM_CHE1,,,,,,,,QUADSPI_BK1_NCS,,FMC_NE3,DCMI_D12,LCD_R7,EVENTOUT, +PortG,PG7,,,HRTIM_CHE2,,,,SAI1_MCLK_A,USART6_CK,,,,,FMC_INT,DCMI_D13,LCD_CLK,EVENTOUT, +PortG,PG8,,,,TIM8_ETR,,SPI6_NSS,,USART6_RTS,SPDIFRX_IN2,,,ETH_PPS_OUT,FMC_SDCLK,,LCD_G7,EVENTOUT, +PortG,PG9,,,,,,SPI1_MISO/I2S1_SDI,,USART6_RX,SPDIFRX_IN3,QUADSPI_BK2_IO2,SAI2_FS_B,,FMC_NE2/FMC_NCE,DCMI_VSYNC,,EVENTOUT, +PortG,PG10,,,HRTIM_FLT5,,,SPI1_NSS/I2S1_WS,,,,LCD_G3,SAI2_SD_B,,FMC_NE3,DCMI_D2,LCD_B2,EVENTOUT, +PortG,PG11,,,HRTIM_EEV4,,,SPI1_SCK/I2S1_CK,,,SPDIFRX_IN0,,SDMMC2_D2,ETH_MII_TX_EN/ETH_RMII_TX_EN,,DCMI_D3,LCD_B3,EVENTOUT, +PortG,PG12,,LPTIM1_IN1,HRTIM_EEV5,,,SPI6_MISO,,USART6_RTS,SPDIFRX_IN1,LCD_B4,,ETH_MII_TXD1/ETH_RMII_TXD1,FMC_NE4,,LCD_B1,EVENTOUT, +PortG,PG13,TRACED0,LPTIM1_OUT,HRTIM_EEV10,,,SPI6_SCK,,USART6_CTS/USART6_NSS,,,,ETH_MII_TXD0/ETH_RMII_TXD0,FMC_A24,,LCD_R0,EVENTOUT, +PortG,PG14,TRACED1,LPTIM1_ETR,,,,SPI6_MOSI,,USART6_TX,,QUADSPI_BK2_IO3,,ETH_MII_TXD1/ETH_RMII_TXD1,FMC_A25,,LCD_B0,EVENTOUT, +PortG,PG15,,,,,,,,USART6_CTS/USART6_NSS,,,,,FMC_SDNCAS,DCMI_D13,,EVENTOUT, +PortH,PH0,,,,,,,,,,,,,,,,EVENTOUT, +PortH,PH1,,,,,,,,,,,,,,,,EVENTOUT, +PortH,PH2,,LPTIM1_IN2,,,,,,,,QUADSPI_BK2_IO0,SAI2_SCK_B,ETH_MII_CRS,FMC_SDCKE0,,LCD_R0,EVENTOUT, +PortH,PH3,,,,,,,,,,QUADSPI_BK2_IO1,SAI2_MCK_B,ETH_MII_COL,FMC_SDNE0,,LCD_R1,EVENTOUT, +PortH,PH4,,,,,I2C2_SCL,,,,,LCD_G5,OTG_HS_ULPI_NXT,,,,LCD_G4,EVENTOUT, +PortH,PH5,,,,,I2C2_SDA,SPI5_NSS,,,,,,,FMC_SDNWE,,,EVENTOUT, +PortH,PH6,,,TIM12_CH1,,I2C2_SMBA,SPI5_SCK,,,,,,ETH_MII_RXD2,FMC_SDNE1,DCMI_D8,,EVENTOUT, +PortH,PH7,,,,,I2C3_SCL,SPI5_MISO,,,,,,ETH_MII_RXD3,FMC_SDCKE1,DCMI_D9,,EVENTOUT, +PortH,PH8,,,TIM5_ETR,,I2C3_SDA,,,,,,,,FMC_D16,DCMI_HSYNC,LCD_R2,EVENTOUT, +PortH,PH9,,,TIM12_CH2,,I2C3_SMBA,,,,,,,,FMC_D17,DCMI_D0,LCD_R3,EVENTOUT, +PortH,PH10,,,TIM5_CH1,,I2C4_SMBA,,,,,,,,FMC_D18,DCMI_D1,LCD_R4,EVENTOUT, +PortH,PH11,,,TIM5_CH2,,I2C4_SCL,,,,,,,,FMC_D19,DCMI_D2,LCD_R5,EVENTOUT, +PortH,PH12,,,TIM5_CH3,,I2C4_SDA,,,,,,,,FMC_D20,DCMI_D3,LCD_R6,EVENTOUT, +PortH,PH13,,,,TIM8_CH1N,,,,,UART4_TX,CAN1_TX,,,FMC_D21,,LCD_G2,EVENTOUT, +PortH,PH14,,,,TIM8_CH2N,,,,,UART4_RX,CAN1_RX,,,FMC_D22,DCMI_D4,LCD_G3,EVENTOUT, +PortH,PH15,,,,TIM8_CH3N,,,,,,CAN1_TXFD,,,FMC_D23,DCMI_D11,LCD_G4,EVENTOUT, +PortI,PI0,,,TIM5_CH4,,,SPI2_NSS/I2S2_WS,,,,CAN1_RXFD,,,FMC_D24,DCMI_D13,LCD_G5,EVENTOUT, +PortI,PI1,,,,TIM8_BKIN2,,SPI2_SCK/I2S2_CK,,,,,,TIM8_BKIN2_COMP12,FMC_D25,DCMI_D8,LCD_G6,EVENTOUT, +PortI,PI2,,,,TIM8_CH4,,SPI2_MISO/I2S2_SDI,,,,,,,FMC_D26,DCMI_D9,LCD_G7,EVENTOUT, +PortI,PI3,,,,TIM8_ETR,,SPI2_MOSI/I2S2_SDO,,,,,,,FMC_D27,DCMI_D10,,EVENTOUT, +PortI,PI4,,,,TIM8_BKIN,,,,,,,SAI2_MCK_A,TIM8_BKIN_COMP12,FMC_NBL2,DCMI_D5,LCD_B4,EVENTOUT, +PortI,PI5,,,,TIM8_CH1,,,,,,,SAI2_SCK_A,,FMC_NBL3,DCMI_VSYNC,LCD_B5,EVENTOUT, +PortI,PI6,,,,TIM8_CH2,,,,,,,SAI2_SD_A,,FMC_D28,DCMI_D6,LCD_B6,EVENTOUT, +PortI,PI7,,,,TIM8_CH3,,,,,,,SAI2_FS_A,,FMC_D29,DCMI_D7,LCD_B7,EVENTOUT, +PortI,PI8,,,,,,,,,,,,,,,,EVENTOUT, +PortI,PI9,,,,,,,,,UART4_RX,CAN1_RX,,,FMC_D30,,LCD_VSYNC,EVENTOUT, +PortI,PI10,,,,,,,,,,CAN1_RXFD,,ETH_MII_RX_ER,FMC_D31,,LCD_HSYNC,EVENTOUT, +PortI,PI11,,,,,,,,,,LCD_G6,OTG_HS_ULPI_DIR,,,,,EVENTOUT, +PortI,PI12,,,,,,,,,,,,ETH_TX_ER,,,LCD_HSYNC,EVENTOUT, +PortI,PI13,,,,,,,,,,,,,,,LCD_VSYNC,EVENTOUT, +PortI,PI14,,,,,,,,,,,,,,,LCD_CLK,EVENTOUT, +PortI,PI15,,,,,,,,,,LCD_G2,,,,,LCD_R0,EVENTOUT, +PortJ,PJ0,,,,,,,,,,LCD_R7,,,,,LCD_R1,EVENTOUT, +PortJ,PJ1,,,,,,,,,,,,,,,LCD_R2,EVENTOUT, +PortJ,PJ2,,,,,,,,,,,,,,,LCD_R3,EVENTOUT, +PortJ,PJ3,,,,,,,,,,,,,,,LCD_R4,EVENTOUT, +PortJ,PJ4,,,,,,,,,,,,,,,LCD_R5,EVENTOUT, +PortJ,PJ5,,,,,,,,,,,,,,,LCD_R6,EVENTOUT, +PortJ,PJ6,,,,TIM8_CH2,,,,,,,,,,,LCD_R7,EVENTOUT, +PortJ,PJ7,TRGIN,,,TIM8_CH2N,,,,,,,,,,,LCD_G0,EVENTOUT, +PortJ,PJ8,,TIM1_CH3N,,TIM8_CH1,,,,,UART8_TX,,,,,,LCD_G1,EVENTOUT, +PortJ,PJ9,,TIM1_CH3,,TIM8_CH1N,,,,,UART8_RX,,,,,,LCD_G2,EVENTOUT, +PortJ,PJ10,,TIM1_CH2N,,TIM8_CH2,,SPI5_MOSI,,,,,,,,,LCD_G3,EVENTOUT, +PortJ,PJ11,,TIM1_CH2,,TIM8_CH2N,,SPI5_MISO,,,,,,,,,LCD_G4,EVENTOUT, +PortJ,PJ12,TRGOUT,,,,,,,,,LCD_G3,,,,,LCD_B0,EVENTOUT, +PortJ,PJ13,,,,,,,,,,LCD_B4,,,,,LCD_B1,EVENTOUT, +PortJ,PJ14,,,,,,,,,,,,,,,LCD_B2,EVENTOUT, +PortJ,PJ15,,,,,,,,,,,,,,,LCD_B3,EVENTOUT, +PortK,PK0,,TIM1_CH1N,,TIM8_CH3,,SPI5_SCK,,,,,,,,,LCD_G5,EVENTOUT, +PortK,PK1,,TIM1_CH1,,TIM8_CH3N,,SPI5_NSS,,,,,,,,,LCD_G6,EVENTOUT, +PortK,PK2,,TIM1_BKIN,,TIM8_BKIN,,,,,,,TIM8_BKIN_COMP12,TIM1_BKIN_COMP12,,,LCD_G7,EVENTOUT, +PortK,PK3,,,,,,,,,,,,,,,LCD_B4,EVENTOUT, +PortK,PK4,,,,,,,,,,,,,,,LCD_B5,EVENTOUT, +PortK,PK5,,,,,,,,,,,,,,,LCD_B6,EVENTOUT, +PortK,PK6,,,,,,,,,,,,,,,LCD_B7,EVENTOUT, +PortK,PK7,,,,,,,,,,,,,,,LCD_DE,EVENTOUT, diff --git a/ports/stm32/boards/stm32l476_af.csv b/ports/stm32/boards/stm32l476_af.csv index d67c33880..01db89572 100644 --- a/ports/stm32/boards/stm32l476_af.csv +++ b/ports/stm32/boards/stm32l476_af.csv @@ -1,7 +1,7 @@ Port,,AF0,AF1,AF2,AF3,AF4,AF5,AF6,AF7,AF8,AF9,AF10,AF11,AF12,AF13,AF14,AF15,, ,,SYS_AF,TIM1/TIM2/TIM5/TIM8/LPTIM1,TIM1/TIM2/TIM3/TIM4/TIM5,TIM8,I2C1/I2C2/I2C3,SPI1/SPI2,SPI3/DFSDM,USART1/USART2/USART3,UART4/UART5/LPUART1,CAN1/TSC,OTG_FS/QUADSPI,LCD,SDMMC1/COMP1/COMP2/FMC/SWPMI1,SAI1/SAI2,TIM2/TIM15/TIM16/TIM17/LPTIM2,EVENTOUT,ADC,COMP PortA,PA0,,TIM2_CH1,TIM5_CH1,TIM8_ETR,,,,USART2_CTS,UART4_TX,,,,,SAI1_EXTCLK,TIM2_ETR,EVENTOUT,ADC12_IN5, -PortA,PA1,,TIM2_CH2,TIM5_CH2,,,,,USART2_RTS_DE,UART4_RX,,,LCD_SEG0,,,TIM15_CH1N,EVENTOUT,ADC12_IN6, +PortA,PA1,,TIM2_CH2,TIM5_CH2,,,,,USART2_RTS/USART2_DE,UART4_RX,,,LCD_SEG0,,,TIM15_CH1N,EVENTOUT,ADC12_IN6, PortA,PA2,,TIM2_CH3,TIM5_CH3,,,,,USART2_TX,,,,LCD_SEG1,,SAI2_EXTCLK,TIM15_CH1,EVENTOUT,ADC12_IN7, PortA,PA3,,TIM2_CH4,TIM5_CH4,,,,,USART2_RX,,,,LCD_SEG2,,,TIM15_CH2,EVENTOUT,ADC12_IN8, PortA,PA4,,,,,,SPI1_NSS,SPI3_NSS,USART2_CK,,,,,,SAI1_FS_B,LPTIM2_OUT,EVENTOUT,ADC12_IN9, @@ -12,15 +12,15 @@ PortA,PA8,MCO,TIM1_CH1,,,,,,USART1_CK,,,OTG_FS_SOF,LCD_COM0,,,LPTIM2_OUT,EVENTOU PortA,PA9,,TIM1_CH2,,,,,,USART1_TX,,,,LCD_COM1,,,TIM15_BKIN,EVENTOUT,, PortA,PA10,,TIM1_CH3,,,,,,USART1_RX,,,OTG_FS_ID,LCD_COM2,,,TIM17_BKIN,EVENTOUT,, PortA,PA11,,TIM1_CH4,TIM1_BKIN2,,,,,USART1_CTS,,CAN1_RX,OTG_FS_DM,,TIM1_BKIN2_COMP1,,,EVENTOUT,, -PortA,PA12,,TIM1_ETR,,,,,,USART1_RTS_DE,,CAN1_TX,OTG_FS_DP,,,,,EVENTOUT,, -PortA,PA13,JTMS-SWDIO,IR_OUT,,,,,,,,,OTG_FS_NOE,,,,,EVENTOUT,, -PortA,PA14,JTCK-SWCLK,,,,,,,,,,,,,,,EVENTOUT,, -PortA,PA15,JTDI,TIM2_CH1,TIM2_ETR,,,SPI1_NSS,SPI3_NSS,,UART4_RTS_DE,TSC_G3_IO1,,LCD_SEG17,,SAI2_FS_B,,EVENTOUT,, +PortA,PA12,,TIM1_ETR,,,,,,USART1_RTS/USART1_DE,,CAN1_TX,OTG_FS_DP,,,,,EVENTOUT,, +PortA,PA13,JTMS/SWDIO,IR_OUT,,,,,,,,,OTG_FS_NOE,,,,,EVENTOUT,, +PortA,PA14,JTCK/SWCLK,,,,,,,,,,,,,,,EVENTOUT,, +PortA,PA15,JTDI,TIM2_CH1,TIM2_ETR,,,SPI1_NSS,SPI3_NSS,,UART4_RTS/UART4_DE,TSC_G3_IO1,,LCD_SEG17,,SAI2_FS_B,,EVENTOUT,, PortB,PB0,,TIM1_CH2N,TIM3_CH3,TIM8_CH2N,,,,USART3_CK,,,QUADSPI_BK1_IO1,LCD_SEG5,COMP1_OUT,,,EVENTOUT,ADC12_IN15, -PortB,PB1,,TIM1_CH3N,TIM3_CH4,TIM8_CH3N,,,DFSDM_DATIN0,USART3_RTS_DE,,,QUADSPI_BK1_IO0,LCD_SEG6,,,LPTIM2_IN1,EVENTOUT,ADC12_IN16,COMP1_INN +PortB,PB1,,TIM1_CH3N,TIM3_CH4,TIM8_CH3N,,,DFSDM_DATIN0,USART3_RTS/USART3_DE,,,QUADSPI_BK1_IO0,LCD_SEG6,,,LPTIM2_IN1,EVENTOUT,ADC12_IN16,COMP1_INN PortB,PB2,RTC_OUT,LPTIM1_OUT,,,I2C3_SMBA,,DFSDM_CKIN0,,,,,,,,,EVENTOUT,,COMP1_INP -PortB,PB3,JTDO-TRACESWO,TIM2_CH2,,,,SPI1_SCK,SPI3_SCK,USART1_RTS_DE,,,,LCD_SEG7,,SAI1_SCK_B,,EVENTOUT,,COMP2_INM -PortB,PB4,NJTRST,,TIM3_CH1,,,SPI1_MISO,SPI3_MISO,USART1_CTS,UART5_RTS_DE,TSC_G2_IO1,,LCD_SEG8,,SAI1_MCLK_B,TIM17_BKIN,EVENTOUT,,COMP2_INP +PortB,PB3,JTDO/TRACESWO,TIM2_CH2,,,,SPI1_SCK,SPI3_SCK,USART1_RTS/USART1_DE,,,,LCD_SEG7,,SAI1_SCK_B,,EVENTOUT,,COMP2_INM +PortB,PB4,NJTRST,,TIM3_CH1,,,SPI1_MISO,SPI3_MISO,USART1_CTS,UART5_RTS/UART5_DE,TSC_G2_IO1,,LCD_SEG8,,SAI1_MCLK_B,TIM17_BKIN,EVENTOUT,,COMP2_INP PortB,PB5,,LPTIM1_IN1,TIM3_CH2,,I2C1_SMBA,SPI1_MOSI,SPI3_MOSI,USART1_CK,UART5_CTS,TSC_G2_IO2,,LCD_SEG9,COMP2_OUT,SAI1_SD_B,TIM16_BKIN,EVENTOUT,, PortB,PB6,,LPTIM1_ETR,TIM4_CH1,TIM8_BKIN2,I2C1_SCL,,DFSDM_DATIN5,USART1_TX,,TSC_G2_IO3,,,TIM8_BKIN2_COMP2,SAI1_FS_B,TIM16_CH1N,EVENTOUT,,COMP2_INP PortB,PB7,,LPTIM1_IN2,TIM4_CH2,TIM8_BKIN,I2C1_SDA,,DFSDM_CKIN5,USART1_RX,UART4_CTS,TSC_G2_IO4,,LCD_SEG21,FMC_NL,TIM8_BKIN_COMP1,TIM17_CH1N,EVENTOUT,,COMP2_INM @@ -28,7 +28,7 @@ PortB,PB8,,,TIM4_CH3,,I2C1_SCL,,DFSDM_DATIN6,,,CAN1_RX,,LCD_SEG16,SDMMC1_D4,SAI1 PortB,PB9,,IR_OUT,TIM4_CH4,,I2C1_SDA,SPI2_NSS,DFSDM_CKIN6,,,CAN1_TX,,LCD_COM3,SDMMC1_D5,SAI1_FS_A,TIM17_CH1,EVENTOUT,, PortB,PB10,,TIM2_CH3,,,I2C2_SCL,SPI2_SCK,DFSDM_DATIN7,USART3_TX,LPUART1_RX,,QUADSPI_CLK,LCD_SEG10,COMP1_OUT,SAI1_SCK_A,,EVENTOUT,, PortB,PB11,,TIM2_CH4,,,I2C2_SDA,,DFSDM_CKIN7,USART3_RX,LPUART1_TX,,QUADSPI_NCS,LCD_SEG11,COMP2_OUT,,,EVENTOUT,, -PortB,PB12,,TIM1_BKIN,,TIM1_BKIN_COMP2,I2C2_SMBA,SPI2_NSS,DFSDM_DATIN1,USART3_CK,LPUART1_RTS_DE,TSC_G1_IO1,,LCD_SEG12,SWPMI1_IO,SAI2_FS_A,TIM15_BKIN,EVENTOUT,, +PortB,PB12,,TIM1_BKIN,,TIM1_BKIN_COMP2,I2C2_SMBA,SPI2_NSS,DFSDM_DATIN1,USART3_CK,LPUART1_RTS/LPUART1_DE,TSC_G1_IO1,,LCD_SEG12,SWPMI1_IO,SAI2_FS_A,TIM15_BKIN,EVENTOUT,, PortB,PB13,,TIM1_CH1N,,,I2C2_SCL,SPI2_SCK,DFSDM_CKIN1,USART3_CTS,LPUART1_CTS,TSC_G1_IO2,,LCD_SEG13,SWPMI1_TX,SAI2_SCK_A,TIM15_CH1N,EVENTOUT,, PortB,PB14,,TIM1_CH2N,,TIM8_CH2N,I2C2_SDA,SPI2_MISO,DFSDM_DATIN2,USART3_RTS_DE,,TSC_G1_IO3,,LCD_SEG14,SWPMI1_RX,SAI2_MCLK_A,TIM15_CH1,EVENTOUT,, PortB,PB15,RTC_REFIN,TIM1_CH3N,,TIM8_CH3N,,SPI2_MOSI,DFSDM_CKIN2,,,TSC_G1_IO4,,LCD_SEG15,SWPMI1_SUSPEND,SAI2_SD_A,TIM15_CH2,EVENTOUT,, @@ -50,9 +50,9 @@ PortC,PC14,,,,,,,,,,,,,,,,EVENTOUT,, PortC,PC15,,,,,,,,,,,,,,,,EVENTOUT,, PortD,PD0,,,,,,SPI2_NSS,DFSDM_DATIN7,,,CAN1_RX,,,FMC_D2,,,EVENTOUT,, PortD,PD1,,,,,,SPI2_SCK,DFSDM_CKIN7,,,CAN1_TX,,,FMC_D3,,,EVENTOUT,, -PortD,PD2,,,TIM3_ETR,,,,,USART3_RTS_DE,UART5_RX,TSC_SYNC,,LCD_COM7/LCD_SEG31/LCD_SEG43,SDMMC1_CMD,,,EVENTOUT,, +PortD,PD2,,,TIM3_ETR,,,,,USART3_RTS/USART3_DE,UART5_RX,TSC_SYNC,,LCD_COM7/LCD_SEG31/LCD_SEG43,SDMMC1_CMD,,,EVENTOUT,, PortD,PD3,,,,,,SPI2_MISO,DFSDM_DATIN0,USART2_CTS,,,,,FMC_CLK,,,EVENTOUT,, -PortD,PD4,,,,,,SPI2_MOSI,DFSDM_CKIN0,USART2_RTS_DE,,,,,FMC_NOE,,,EVENTOUT,, +PortD,PD4,,,,,,SPI2_MOSI,DFSDM_CKIN0,USART2_RTS/USART2_DE,,,,,FMC_NOE,,,EVENTOUT,, PortD,PD5,,,,,,,,USART2_TX,,,,,FMC_NWE,,,EVENTOUT,, PortD,PD6,,,,,,,DFSDM_DATIN1,USART2_RX,,,,,FMC_NWAIT,SAI1_SD_A,,EVENTOUT,, PortD,PD7,,,,,,,DFSDM_CKIN1,USART2_CK,,,,,FMC_NE1,,,EVENTOUT,, @@ -60,13 +60,13 @@ PortD,PD8,,,,,,,,USART3_TX,,,,LCD_SEG28,FMC_D13,,,EVENTOUT,, PortD,PD9,,,,,,,,USART3_RX,,,,LCD_SEG29,FMC_D14,SAI2_MCLK_A,,EVENTOUT,, PortD,PD10,,,,,,,,USART3_CK,,TSC_G6_IO1,,LCD_SEG30,FMC_D15,SAI2_SCK_A,,EVENTOUT,, PortD,PD11,,,,,,,,USART3_CTS,,TSC_G6_IO2,,LCD_SEG31,FMC_A16,SAI2_SD_A,LPTIM2_ETR,EVENTOUT,, -PortD,PD12,,,TIM4_CH1,,,,,USART3_RTS_DE,,TSC_G6_IO3,,LCD_SEG32,FMC_A17,SAI2_FS_A,LPTIM2_IN1,EVENTOUT,, +PortD,PD12,,,TIM4_CH1,,,,,USART3_RTS/USART3_DE,,TSC_G6_IO3,,LCD_SEG32,FMC_A17,SAI2_FS_A,LPTIM2_IN1,EVENTOUT,, PortD,PD13,,,TIM4_CH2,,,,,,,TSC_G6_IO4,,LCD_SEG33,FMC_A18,,LPTIM2_OUT,EVENTOUT,, PortD,PD14,,,TIM4_CH3,,,,,,,,,LCD_SEG34,FMC_D0,,,EVENTOUT,, PortD,PD15,,,TIM4_CH4,,,,,,,,,LCD_SEG35,FMC_D1,,,EVENTOUT,, PortE,PE0,,,TIM4_ETR,,,,,,,,,LCD_SEG36,FMC_NBL0,,TIM16_CH1,EVENTOUT,, PortE,PE1,,,,,,,,,,,,LCD_SEG37,FMC_NBL1,,TIM17_CH1,EVENTOUT,, -PortE,PE2,TRACECK,,TIM3_ETR,,,,,,,TSC_G7_IO1,,LCD_SEG38,FMC_A23,SAI1_MCLK_A,,EVENTOUT,, +PortE,PE2,TRACECLK,,TIM3_ETR,,,,,,,TSC_G7_IO1,,LCD_SEG38,FMC_A23,SAI1_MCLK_A,,EVENTOUT,, PortE,PE3,TRACED0,,TIM3_CH1,,,,,,,TSC_G7_IO2,,LCD_SEG39,FMC_A19,SAI1_SD_B,,EVENTOUT,, PortE,PE4,TRACED1,,TIM3_CH2,,,,DFSDM_DATIN3,,,TSC_G7_IO3,,,FMC_A20,SAI1_FS_A,,EVENTOUT,, PortE,PE5,TRACED2,,TIM3_CH3,,,,DFSDM_CKIN3,,,TSC_G7_IO4,,,FMC_A21,SAI1_SCK_A,,EVENTOUT,, @@ -102,13 +102,13 @@ PortG,PG2,,,,,,SPI1_SCK,,,,,,,FMC_A12,SAI2_SCK_B,,EVENTOUT,, PortG,PG3,,,,,,SPI1_MISO,,,,,,,FMC_A13,SAI2_FS_B,,EVENTOUT,, PortG,PG4,,,,,,SPI1_MOSI,,,,,,,FMC_A14,SAI2_MCLK_B,,EVENTOUT,, PortG,PG5,,,,,,SPI1_NSS,,,LPUART1_CTS,,,,FMC_A15,SAI2_SD_B,,EVENTOUT,, -PortG,PG6,,,,,I2C3_SMBA,,,,LPUART1_RTS_DE,,,,,,,EVENTOUT,, +PortG,PG6,,,,,I2C3_SMBA,,,,LPUART1_RTS/LPUART1_DE,,,,,,,EVENTOUT,, PortG,PG7,,,,,I2C3_SCL,,,,LPUART1_TX,,,,FMC_INT3,,,EVENTOUT,, PortG,PG8,,,,,I2C3_SDA,,,,LPUART1_RX,,,,,,,EVENTOUT,, PortG,PG9,,,,,,,SPI3_SCK,USART1_TX,,,,,FMC_NCE3/FMC_NE2,SAI2_SCK_A,TIM15_CH1N,EVENTOUT,, PortG,PG10,,LPTIM1_IN1,,,,,SPI3_MISO,USART1_RX,,,,,FMC_NE3,SAI2_FS_A,TIM15_CH1,EVENTOUT,, PortG,PG11,,LPTIM1_IN2,,,,,SPI3_MOSI,USART1_CTS,,,,,,SAI2_MCLK_A,TIM15_CH2,EVENTOUT,, -PortG,PG12,,LPTIM1_ETR,,,,,SPI3_NSS,USART1_RTS_DE,,,,,FMC_NE4,SAI2_SD_A,,EVENTOUT,, +PortG,PG12,,LPTIM1_ETR,,,,,SPI3_NSS,USART1_RTS/USART1_DE,,,,,FMC_NE4,SAI2_SD_A,,EVENTOUT,, PortG,PG13,,,,,I2C1_SDA,,,USART1_CK,,,,,FMC_A24,,,EVENTOUT,, PortG,PG14,,,,,I2C1_SCL,,,,,,,,FMC_A25,,,EVENTOUT,, PortG,PG15,,LPTIM1_OUT,,,I2C1_SMBA,,,,,,,,,,,EVENTOUT,, diff --git a/ports/stm32/boards/stm32l476xe.ld b/ports/stm32/boards/stm32l476xe.ld index 11b2972ad..22c4466c6 100644 --- a/ports/stm32/boards/stm32l476xe.ld +++ b/ports/stm32/boards/stm32l476xe.ld @@ -11,6 +11,7 @@ MEMORY FLASH_FS (r) : ORIGIN = 0x08060000, LENGTH = 128K /* sectors 192-255 */ RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 96K SRAM2 (xrw) : ORIGIN = 0x10000000, LENGTH = 32K + FS_CACHE(xrw) : ORIGIN = 0x10007800, LENGTH = 2K } /* produce a link error if there is not this amount of RAM for these sections */ @@ -22,10 +23,9 @@ _minimum_heap_size = 16K; aligned for a call. */ _estack = ORIGIN(RAM) + LENGTH(RAM); -/* define common sections and symbols */ -INCLUDE common.ld - /* RAM extents for the garbage collector */ +_ram_fs_cache_start = ORIGIN(FS_CACHE); +_ram_fs_cache_block_size = LENGTH(FS_CACHE); _ram_start = ORIGIN(RAM); _ram_end = ORIGIN(RAM) + LENGTH(RAM); _heap_start = _ebss; /* heap starts just after statically allocated memory */ diff --git a/ports/stm32/boards/stm32l476xg.ld b/ports/stm32/boards/stm32l476xg.ld index a94fa2750..40d679ac3 100644 --- a/ports/stm32/boards/stm32l476xg.ld +++ b/ports/stm32/boards/stm32l476xg.ld @@ -11,10 +11,9 @@ MEMORY FLASH_FS (r) : ORIGIN = 0x08080000, LENGTH = 512K /* sectors 256-511 */ RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 96K SRAM2 (xrw) : ORIGIN = 0x10000000, LENGTH = 32K + FS_CACHE(xrw) : ORIGIN = 0x10007800, LENGTH = 2K } -ENTRY(Reset_Handler) - /* produce a link error if there is not this amount of RAM for these sections */ _minimum_stack_size = 2K; _minimum_heap_size = 16K; @@ -24,10 +23,9 @@ _minimum_heap_size = 16K; aligned for a call. */ _estack = ORIGIN(RAM) + LENGTH(RAM); -/* define common sections and symbols */ -INCLUDE common.ld - /* RAM extents for the garbage collector */ +_ram_fs_cache_start = ORIGIN(FS_CACHE); +_ram_fs_cache_block_size = LENGTH(FS_CACHE); _ram_start = ORIGIN(RAM); _ram_end = ORIGIN(RAM) + LENGTH(RAM); _heap_start = _ebss; /* heap starts just after statically allocated memory */ diff --git a/ports/stm32/boards/stm32l496_af.csv b/ports/stm32/boards/stm32l496_af.csv new file mode 100644 index 000000000..311770a05 --- /dev/null +++ b/ports/stm32/boards/stm32l496_af.csv @@ -0,0 +1,142 @@ +Port,,AF0,AF1,AF2,AF3,AF4,AF5,AF6,AF7,AF8,AF9,AF10,AF11,AF12,AF13,AF14,AF15,,, +,,SYS_AF,TIM1/TIM2/TIM5/TIM8/LPTIM1,TIM1/TIM2/TIM3/TIM4/TIM5,TIM8,I2C1/I2C2/I2C3,SPI1/SPI2,SPI3/DFSDM,USART1/USART2/USART3,UART4/UART5/LPUART1,CAN1/TSC,OTG_FS/QUADSPI,LCD,SDMMC1/COMP1/COMP2/FMC/SWPMI1,SAI1/SAI2,TIM2/TIM15/TIM16/TIM17/LPTIM2,EVENTOUT,ADC,COMP,DAC +PortA,PA0,,TIM2_CH1,TIM5_CH1,TIM8_ETR,,,,USART2_CTS,UART4_TX,,,,,SAI1_EXTCLK,TIM2_ETR,EVENTOUT,ADC12_IN5,, +PortA,PA1,,TIM2_CH2,TIM5_CH2,,I2C1_SMBA,SPI1_SCK,,USART2_RTS/USART2_DE,UART4_RX,,,LCD_SEG0,,,TIM15_CH1N,EVENTOUT,ADC12_IN6,, +PortA,PA2,,TIM2_CH3,TIM5_CH3,,,,,USART2_TX,LPUART1_TX,,QUADSPI_BK1_NCS,LCD_SEG1,,SAI2_EXTCLK,TIM15_CH1,EVENTOUT,ADC12_IN7,, +PortA,PA3,,TIM2_CH4,TIM5_CH4,,,,,USART2_RX,LPUART1_RX,,QUADSPI_CLK,LCD_SEG2,,SAI1_MCLK_A,TIM15_CH2,EVENTOUT,ADC12_IN8,, +PortA,PA4,,,,,,SPI1_NSS,SPI3_NSS,USART2_CK,,,DCMI_HSYNC,,,SAI1_FS_B,LPTIM2_OUT,EVENTOUT,ADC12_IN9,,DAC1_OUT1 +PortA,PA5,,TIM2_CH1,TIM2_ETR,TIM8_CH1N,,SPI1_SCK,,,,,,,,,LPTIM2_ETR,EVENTOUT,ADC12_IN10,,DAC1_OUT2 +PortA,PA6,,TIM1_BKIN,TIM3_CH1,TIM8_BKIN,DCMI_PIXCLK,SPI1_MISO,,USART3_CTS,LPUART1_CTS,,QUADSPI_BK1_IO3,LCD_SEG3,TIM1_BKIN_COMP2,TIM8_BKIN_COMP2,TIM16_CH1,EVENTOUT,ADC12_IN11,, +PortA,PA7,,TIM1_CH1N,TIM3_CH2,TIM8_CH1N,I2C3_SCL,SPI1_MOSI,,,,,QUADSPI_BK1_IO2,LCD_SEG4,,,TIM17_CH1,EVENTOUT,ADC12_IN12,, +PortA,PA8,MCO,TIM1_CH1,,,,,,USART1_CK,,,OTG_FS_SOF,LCD_COM0,SWPMI1_IO,SAI1_SCK_A,LPTIM2_OUT,EVENTOUT,,, +PortA,PA9,,TIM1_CH2,,SPI2_SCK,I2C1_SCL,DCMI_D0,,USART1_TX,,,,LCD_COM1,,SAI1_FS_A,TIM15_BKIN,EVENTOUT,,, +PortA,PA10,,TIM1_CH3,,,I2C1_SDA,DCMI_D1,,USART1_RX,,,OTG_FS_ID,LCD_COM2,,SAI1_SD_A,TIM17_BKIN,EVENTOUT,,, +PortA,PA11,,TIM1_CH4,TIM1_BKIN2,,,SPI1_MISO,,USART1_CTS,,CAN1_RX,OTG_FS_DM,,TIM1_BKIN2_COMP1,,,EVENTOUT,,, +PortA,PA12,,TIM1_ETR,,,,SPI1_MOSI,,USART1_RTS/USART1_DE,,CAN1_TX,OTG_FS_DP,,,,,EVENTOUT,,, +PortA,PA13,JTMS/SWDIO,IR_OUT,,,,,,,,,OTG_FS_NOE,,SWPMI1_TX,SAI1_SD_B,,EVENTOUT,,, +PortA,PA14,JTCK/SWCLK,LPTIM1_OUT,,,I2C1_SMBA,I2C4_SMBA,,,,,OTG_FS_SOF,,SWPMI1_RX,SAI1_FS_B,,EVENTOUT,,, +PortA,PA15,JTDI,TIM2_CH1,TIM2_ETR,USART2_RX,,SPI1_NSS,SPI3_NSS,USART3_RTS/USART3_DE,UART4_RTS/UART4_DE,TSC_G3_IO1,,LCD_SEG17,SWPMI1_SUSPEND,SAI2_FS_B,,EVENTOUT,,, +PortB,PB0,,TIM1_CH2N,TIM3_CH3,TIM8_CH2N,,SPI1_NSS,,USART3_CK,,,QUADSPI_BK1_IO1,LCD_SEG5,COMP1_OUT,SAI1_EXTCLK,,EVENTOUT,ADC12_IN15,, +PortB,PB1,,TIM1_CH3N,TIM3_CH4,TIM8_CH3N,,,DFSDM1_DATIN0,USART3_RTS/USART3_DE,LPUART1_RTS/LPUART1_DE,,QUADSPI_BK1_IO0,LCD_SEG6,,,LPTIM2_IN1,EVENTOUT,ADC12_IN16,COMP1_INM, +PortB,PB2,RTC_OUT,LPTIM1_OUT,,,I2C3_SMBA,,DFSDM1_CKIN0,,,,,LCD_VLCD,,,,EVENTOUT,,COMP1_INP, +PortB,PB3,JTDO/TRACESWO,TIM2_CH2,,,,SPI1_SCK,SPI3_SCK,USART1_RTS/USART1_DE,,,OTG_FS_CRS_SYNC,LCD_SEG7,,SAI1_SCK_B,,EVENTOUT,,COMP2_INM, +PortB,PB4,NJTRST,,TIM3_CH1,,I2C3_SDA,SPI1_MISO,SPI3_MISO,USART1_CTS,UART5_RTS/UART5_DE,TSC_G2_IO1,DCMI_D12,LCD_SEG8,,SAI1_MCLK_B,TIM17_BKIN,EVENTOUT,,COMP2_INP, +PortB,PB5,,LPTIM1_IN1,TIM3_CH2,CAN2_RX,I2C1_SMBA,SPI1_MOSI,SPI3_MOSI,USART1_CK,UART5_CTS,TSC_G2_IO2,DCMI_D10,LCD_SEG9,COMP2_OUT,SAI1_SD_B,TIM16_BKIN,EVENTOUT,,, +PortB,PB6,,LPTIM1_ETR,TIM4_CH1,TIM8_BKIN2,I2C1_SCL,I2C4_SCL,DFSDM1_DATIN5,USART1_TX,CAN2_TX,TSC_G2_IO3,DCMI_D5,,TIM8_BKIN2_COMP2,SAI1_FS_B,TIM16_CH1N,EVENTOUT,,COMP2_INP, +PortB,PB7,,LPTIM1_IN2,TIM4_CH2,TIM8_BKIN,I2C1_SDA,I2C4_SDA,DFSDM1_CKIN5,USART1_RX,UART4_CTS,TSC_G2_IO4,DCMI_VSYNC,LCD_SEG21,FMC_NL,TIM8_BKIN_COMP1,TIM17_CH1N,EVENTOUT,,COMP2_INM, +PortB,PB8,,,TIM4_CH3,,I2C1_SCL,,DFSDM1_DATIN6,,,CAN1_RX,DCMI_D6,LCD_SEG16,SDMMC1_D4,SAI1_MCLK_A,TIM16_CH1,EVENTOUT,,, +PortB,PB9,,IR_OUT,TIM4_CH4,,I2C1_SDA,SPI2_NSS,DFSDM1_CKIN6,,,CAN1_TX,DCMI_D7,LCD_COM3,SDMMC1_D5,SAI1_FS_A,TIM17_CH1,EVENTOUT,,, +PortB,PB10,,TIM2_CH3,,I2C4_SCL,I2C2_SCL,SPI2_SCK,DFSDM1_DATIN7,USART3_TX,LPUART1_RX,TSC_SYNC,QUADSPI_CLK,LCD_SEG10,COMP1_OUT,SAI1_SCK_A,,EVENTOUT,,, +PortB,PB11,,TIM2_CH4,,I2C4_SDA,I2C2_SDA,,DFSDM1_CKIN7,USART3_RX,LPUART1_TX,,QUADSPI_BK1_NCS,LCD_SEG11,COMP2_OUT,,,EVENTOUT,,, +PortB,PB12,,TIM1_BKIN,,TIM1_BKIN_COMP2,I2C2_SMBA,SPI2_NSS,DFSDM1_DATIN1,USART3_CK,LPUART1_RTS/LPUART1_DE,TSC_G1_IO1,CAN2_RX,LCD_SEG12,SWPMI1_IO,SAI2_FS_A,TIM15_BKIN,EVENTOUT,,, +PortB,PB13,,TIM1_CH1N,,,I2C2_SCL,SPI2_SCK,DFSDM1_CKIN1,USART3_CTS,LPUART1_CTS,TSC_G1_IO2,CAN2_TX,LCD_SEG13,SWPMI1_TX,SAI2_SCK_A,TIM15_CH1N,EVENTOUT,,, +PortB,PB14,,TIM1_CH2N,,TIM8_CH2N,I2C2_SDA,SPI2_MISO,DFSDM1_DATIN2,USART3_RTS/USART3_DE,,TSC_G1_IO3,,LCD_SEG14,SWPMI1_RX,SAI2_MCLK_A,TIM15_CH1,EVENTOUT,,, +PortB,PB15,RTC_REFIN,TIM1_CH3N,,TIM8_CH3N,,SPI2_MOSI,DFSDM1_CKIN2,,,TSC_G1_IO4,,LCD_SEG15,SWPMI1_SUSPEND,SAI2_SD_A,TIM15_CH2,EVENTOUT,,, +PortC,PC0,,LPTIM1_IN1,I2C4_SCL,,I2C3_SCL,,DFSDM1_DATIN4,,LPUART1_RX,,,LCD_SEG18,,,LPTIM2_IN1,EVENTOUT,ADC123_IN1,, +PortC,PC1,TRACED0,LPTIM1_OUT,I2C4_SDA,SPI2_MOSI,I2C3_SDA,,DFSDM1_CKIN4,,LPUART1_TX,,QUADSPI_BK2_IO0,LCD_SEG19,,SAI1_SD_A,,EVENTOUT,ADC123_IN2,, +PortC,PC2,,LPTIM1_IN2,,,,SPI2_MISO,DFSDM1_CKOUT,,,,QUADSPI_BK2_IO1,LCD_SEG20,,,,EVENTOUT,ADC123_IN3,, +PortC,PC3,,LPTIM1_ETR,,,,SPI2_MOSI,,,,,QUADSPI_BK2_IO2,LCD_VLCD,,SAI1_SD_A,LPTIM2_ETR,EVENTOUT,ADC123_IN4,, +PortC,PC4,,,,,,,,USART3_TX,,,QUADSPI_BK2_IO3,LCD_SEG22,,,,EVENTOUT,ADC12_IN13,COMP1_INM, +PortC,PC5,,,,,,,,USART3_RX,,,,LCD_SEG23,,,,EVENTOUT,ADC12_IN14,COMP1_INP, +PortC,PC6,,,TIM3_CH1,TIM8_CH1,,,DFSDM1_CKIN3,,,TSC_G4_IO1,DCMI_D0,LCD_SEG24,SDMMC1_D6,SAI2_MCLK_A,,EVENTOUT,,, +PortC,PC7,,,TIM3_CH2,TIM8_CH2,,,DFSDM1_DATIN3,,,TSC_G4_IO2,DCMI_D1,LCD_SEG25,SDMMC1_D7,SAI2_MCLK_B,,EVENTOUT,,, +PortC,PC8,,,TIM3_CH3,TIM8_CH3,,,,,,TSC_G4_IO3,DCMI_D2,LCD_SEG26,SDMMC1_D0,,,EVENTOUT,,, +PortC,PC9,,TIM8_BKIN2,TIM3_CH4,TIM8_CH4,DCMI_D3,,I2C3_SDA,,,TSC_G4_IO4,OTG_FS_NOE,LCD_SEG27,SDMMC1_D1,SAI2_EXTCLK,TIM8_BKIN2_COMP1,EVENTOUT,,, +PortC,PC10,TRACED1,,,,,,SPI3_SCK,USART3_TX,UART4_TX,TSC_G3_IO2,DCMI_D8,LCD_COM4/LCD_SEG28/LCD_SEG40,SDMMC1_D2,SAI2_SCK_B,,EVENTOUT,,, +PortC,PC11,,,,,,QUADSPI_BK2_NCS,SPI3_MISO,USART3_RX,UART4_RX,TSC_G3_IO3,DCMI_D4,LCD_COM5/LCD_SEG29/LCD_SEG41,SDMMC1_D3,SAI2_MCLK_B,,EVENTOUT,,, +PortC,PC12,TRACED3,,,,,,SPI3_MOSI,USART3_CK,UART5_TX,TSC_G3_IO4,DCMI_D9,LCD_COM6/LCD_SEG30/LCD_SEG42,SDMMC1_CK,SAI2_SD_B,,EVENTOUT,,, +PortC,PC13,,,,,,,,,,,,,,,,EVENTOUT,,, +PortC,PC14,,,,,,,,,,,,,,,,EVENTOUT,,, +PortC,PC15,,,,,,,,,,,,,,,,EVENTOUT,,, +PortD,PD0,,,,,,SPI2_NSS,DFSDM1_DATIN7,,,CAN1_RX,,,FMC_D2,,,EVENTOUT,,, +PortD,PD1,,,,,,SPI2_SCK,DFSDM1_CKIN7,,,CAN1_TX,,,FMC_D3,,,EVENTOUT,,, +PortD,PD2,TRACED2,,TIM3_ETR,,,,,USART3_RTS/USART3_DE,UART5_RX,TSC_SYNC,DCMI_D11,LCD_COM7/LCD_SEG31/LCD_SEG43,SDMMC1_CMD,,,EVENTOUT,,, +PortD,PD3,,,,SPI2_SCK,DCMI_D5,SPI2_MISO,DFSDM1_DATIN0,USART2_CTS,,,QUADSPI_BK2_NCS,,FMC_CLK,,,EVENTOUT,,, +PortD,PD4,,,,,,SPI2_MOSI,DFSDM1_CKIN0,USART2_RTS/USART2_DE,,,QUADSPI_BK2_IO0,,FMC_NOE,,,EVENTOUT,,, +PortD,PD5,,,,,,,,USART2_TX,,,QUADSPI_BK2_IO1,,FMC_NWE,,,EVENTOUT,,, +PortD,PD6,,,,,DCMI_D10,QUADSPI_BK2_IO1,DFSDM1_DATIN1,USART2_RX,,,QUADSPI_BK2_IO2,,FMC_NWAIT,SAI1_SD_A,,EVENTOUT,,, +PortD,PD7,,,,,,,DFSDM1_CKIN1,USART2_CK,,,QUADSPI_BK2_IO3,,FMC_NE1,,,EVENTOUT,,, +PortD,PD8,,,,,,,,USART3_TX,,,DCMI_HSYNC,LCD_SEG28,FMC_D13,,,EVENTOUT,,, +PortD,PD9,,,,,,,,USART3_RX,,,DCMI_PIXCLK,LCD_SEG29,FMC_D14,SAI2_MCLK_A,,EVENTOUT,,, +PortD,PD10,,,,,,,,USART3_CK,,TSC_G6_IO1,,LCD_SEG30,FMC_D15,SAI2_SCK_A,,EVENTOUT,,, +PortD,PD11,,,,,I2C4_SMBA,,,USART3_CTS,,TSC_G6_IO2,,LCD_SEG31,FMC_A16,SAI2_SD_A,LPTIM2_ETR,EVENTOUT,,, +PortD,PD12,,,TIM4_CH1,,I2C4_SCL,,,USART3_RTS/USART3_DE,,TSC_G6_IO3,,LCD_SEG32,FMC_A17,SAI2_FS_A,LPTIM2_IN1,EVENTOUT,,, +PortD,PD13,,,TIM4_CH2,,I2C4_SDA,,,,,TSC_G6_IO4,,LCD_SEG33,FMC_A18,,LPTIM2_OUT,EVENTOUT,,, +PortD,PD14,,,TIM4_CH3,,,,,,,,,LCD_SEG34,FMC_D0,,,EVENTOUT,,, +PortD,PD15,,,TIM4_CH4,,,,,,,,,LCD_SEG35,FMC_D1,,,EVENTOUT,,, +PortE,PE0,,,TIM4_ETR,,,,,,,,DCMI_D2,LCD_SEG36,FMC_NBL0,,TIM16_CH1,EVENTOUT,,, +PortE,PE1,,,,,,,,,,,DCMI_D3,LCD_SEG37,FMC_NBL1,,TIM17_CH1,EVENTOUT,,, +PortE,PE2,TRACECLK,,TIM3_ETR,,,,,,,TSC_G7_IO1,,LCD_SEG38,FMC_A23,SAI1_MCLK_A,,EVENTOUT,,, +PortE,PE3,TRACED0,,TIM3_CH1,,,,,,,TSC_G7_IO2,,LCD_SEG39,FMC_A19,SAI1_SD_B,,EVENTOUT,,, +PortE,PE4,TRACED1,,TIM3_CH2,,,,DFSDM1_DATIN3,,,TSC_G7_IO3,DCMI_D4,,FMC_A20,SAI1_FS_A,,EVENTOUT,,, +PortE,PE5,TRACED2,,TIM3_CH3,,,,DFSDM1_CKIN3,,,TSC_G7_IO4,DCMI_D6,,FMC_A21,SAI1_SCK_A,,EVENTOUT,,, +PortE,PE6,TRACED3,,TIM3_CH4,,,,,,,,DCMI_D7,,FMC_A22,SAI1_SD_A,,EVENTOUT,,, +PortE,PE7,,TIM1_ETR,,,,,DFSDM1_DATIN2,,,,,,FMC_D4,SAI1_SD_B,,EVENTOUT,,, +PortE,PE8,,TIM1_CH1N,,,,,DFSDM1_CKIN2,,,,,,FMC_D5,SAI1_SCK_B,,EVENTOUT,,, +PortE,PE9,,TIM1_CH1,,,,,DFSDM1_CKOUT,,,,,,FMC_D6,SAI1_FS_B,,EVENTOUT,,, +PortE,PE10,,TIM1_CH2N,,,,,DFSDM1_DATIN4,,,TSC_G5_IO1,QUADSPI_CLK,,FMC_D7,SAI1_MCLK_B,,EVENTOUT,,, +PortE,PE11,,TIM1_CH2,,,,,DFSDM1_CKIN4,,,TSC_G5_IO2,QUADSPI_BK1_NCS,,FMC_D8,,,EVENTOUT,,, +PortE,PE12,,TIM1_CH3N,,,,SPI1_NSS,DFSDM1_DATIN5,,,TSC_G5_IO3,QUADSPI_BK1_IO0,,FMC_D9,,,EVENTOUT,,, +PortE,PE13,,TIM1_CH3,,,,SPI1_SCK,DFSDM1_CKIN5,,,TSC_G5_IO4,QUADSPI_BK1_IO1,,FMC_D10,,,EVENTOUT,,, +PortE,PE14,,TIM1_CH4,TIM1_BKIN2,TIM1_BKIN2_COMP2,,SPI1_MISO,,,,,QUADSPI_BK1_IO2,,FMC_D11,,,EVENTOUT,,, +PortE,PE15,,TIM1_BKIN,,TIM1_BKIN_COMP1,,SPI1_MOSI,,,,,QUADSPI_BK1_IO3,,FMC_D12,,,EVENTOUT,,, +PortF,PF0,,,,,I2C2_SDA,,,,,,,,FMC_A0,,,EVENTOUT,,, +PortF,PF1,,,,,I2C2_SCL,,,,,,,,FMC_A1,,,EVENTOUT,,, +PortF,PF2,,,,,I2C2_SMBA,,,,,,,,FMC_A2,,,EVENTOUT,,, +PortF,PF3,,,,,,,,,,,,,FMC_A3,,,EVENTOUT,ADC3_IN6,, +PortF,PF4,,,,,,,,,,,,,FMC_A4,,,EVENTOUT,ADC3_IN7,, +PortF,PF5,,,,,,,,,,,,,FMC_A5,,,EVENTOUT,ADC3_IN8,, +PortF,PF6,,TIM5_ETR,TIM5_CH1,,,,,,,,QUADSPI_BK1_IO3,,,SAI1_SD_B,,EVENTOUT,ADC3_IN9,, +PortF,PF7,,,TIM5_CH2,,,,,,,,QUADSPI_BK1_IO2,,,SAI1_MCLK_B,,EVENTOUT,ADC3_IN10,, +PortF,PF8,,,TIM5_CH3,,,,,,,,QUADSPI_BK1_IO0,,,SAI1_SCK_B,,EVENTOUT,ADC3_IN11,, +PortF,PF9,,,TIM5_CH4,,,,,,,,QUADSPI_BK1_IO1,,,SAI1_FS_B,TIM15_CH1,EVENTOUT,ADC3_IN12,, +PortF,PF10,,,,QUADSPI_CLK,,,,,,,DCMI_D11,,,,TIM15_CH2,EVENTOUT,ADC3_IN13,, +PortF,PF11,,,,,,,,,,,DCMI_D12,,,,,EVENTOUT,,, +PortF,PF12,,,,,,,,,,,,,FMC_A6,,,EVENTOUT,,, +PortF,PF13,,,,,I2C4_SMBA,,DFSDM1_DATIN6,,,,,,FMC_A7,,,EVENTOUT,,, +PortF,PF14,,,,,I2C4_SCL,,DFSDM1_CKIN6,,,TSC_G8_IO1,,,FMC_A8,,,EVENTOUT,,, +PortF,PF15,,,,,I2C4_SDA,,,,,TSC_G8_IO2,,,FMC_A9,,,EVENTOUT,,, +PortG,PG0,,,,,,,,,,TSC_G8_IO3,,,FMC_A10,,,EVENTOUT,,, +PortG,PG1,,,,,,,,,,TSC_G8_IO4,,,FMC_A11,,,EVENTOUT,,, +PortG,PG2,,,,,,SPI1_SCK,,,,,,,FMC_A12,SAI2_SCK_B,,EVENTOUT,,, +PortG,PG3,,,,,,SPI1_MISO,,,,,,,FMC_A13,SAI2_FS_B,,EVENTOUT,,, +PortG,PG4,,,,,,SPI1_MOSI,,,,,,,FMC_A14,SAI2_MCLK_B,,EVENTOUT,,, +PortG,PG5,,,,,,SPI1_NSS,,,LPUART1_CTS,,,,FMC_A15,SAI2_SD_B,,EVENTOUT,,, +PortG,PG6,,,,,I2C3_SMBA,,,,LPUART1_RTS/LPUART1_DE,,,,,,,EVENTOUT,,, +PortG,PG7,,,,,I2C3_SCL,,,,LPUART1_TX,,,,FMC_INT,SAI1_MCLK_A,,EVENTOUT,,, +PortG,PG8,,,,,I2C3_SDA,,,,LPUART1_RX,,,,,,,EVENTOUT,,, +PortG,PG9,,,,,,,SPI3_SCK,USART1_TX,,,,,FMC_NCE/FMC_NE2,SAI2_SCK_A,TIM15_CH1N,EVENTOUT,,, +PortG,PG10,,LPTIM1_IN1,,,,,SPI3_MISO,USART1_RX,,,,,FMC_NE3,SAI2_FS_A,TIM15_CH1,EVENTOUT,,, +PortG,PG11,,LPTIM1_IN2,,,,,SPI3_MOSI,USART1_CTS,,,,,,SAI2_MCLK_A,TIM15_CH2,EVENTOUT,,, +PortG,PG12,,LPTIM1_ETR,,,,,SPI3_NSS,USART1_RTS/USART1_DE,,,,,FMC_NE4,SAI2_SD_A,,EVENTOUT,,, +PortG,PG13,,,,,I2C1_SDA,,,USART1_CK,,,,,FMC_A24,,,EVENTOUT,,, +PortG,PG14,,,,,I2C1_SCL,,,,,,,,FMC_A25,,,EVENTOUT,,, +PortG,PG15,,LPTIM1_OUT,,,I2C1_SMBA,,,,,,DCMI_D13,,,,,EVENTOUT,,, +PortH,PH0,,,,,,,,,,,,,,,,EVENTOUT,,, +PortH,PH1,,,,,,,,,,,,,,,,EVENTOUT,,, +PortH,PH2,,,,QUADSPI_BK2_IO0,,,,,,,,,,,,EVENTOUT,,, +PortH,PH3,,,,,,,,,,,,,,,,EVENTOUT,,, +PortH,PH4,,,,,I2C2_SCL,,,,,,,,,,,EVENTOUT,,, +PortH,PH5,,,,,I2C2_SDA,,,,,,DCMI_PIXCLK,,,,,EVENTOUT,,, +PortH,PH6,,,,,I2C2_SMBA,,,,,,DCMI_D8,,,,,EVENTOUT,,, +PortH,PH7,,,,,I2C3_SCL,,,,,,DCMI_D9,,,,,EVENTOUT,,, +PortH,PH8,,,,,I2C3_SDA,,,,,,DCMI_HSYNC,,,,,EVENTOUT,,, +PortH,PH9,,,,,I2C3_SMBA,,,,,,DCMI_D0,,,,,EVENTOUT,,, +PortH,PH10,,,TIM5_CH1,,,,,,,,DCMI_D1,,,,,EVENTOUT,,, +PortH,PH11,,,TIM5_CH2,,,,,,,,DCMI_D2,,,,,EVENTOUT,,, +PortH,PH12,,,TIM5_CH3,,,,,,,,DCMI_D3,,,,,EVENTOUT,,, +PortH,PH13,,,,TIM8_CH1N,,,,,,CAN1_TX,,,,,,EVENTOUT,,, +PortH,PH14,,,,TIM8_CH2N,,,,,,,DCMI_D4,,,,,EVENTOUT,,, +PortH,PH15,,,,TIM8_CH3N,,,,,,,DCMI_D11,,,,,EVENTOUT,,, +PortI,PI0,,,TIM5_CH4,,,SPI2_NSS,,,,,DCMI_D13,,,,,EVENTOUT,,, +PortI,PI1,,,,,,SPI2_SCK,,,,,DCMI_D8,,,,,EVENTOUT,,, +PortI,PI2,,,,TIM8_CH4,,SPI2_MISO,,,,,DCMI_D9,,,,,EVENTOUT,,, +PortI,PI3,,,,TIM8_ETR,,SPI2_MOSI,,,,,DCMI_D10,,,,,EVENTOUT,,, +PortI,PI4,,,,TIM8_BKIN,,,,,,,DCMI_D5,,,,,EVENTOUT,,, +PortI,PI5,,,,TIM8_CH1,,,,,,,DCMI_VSYNC,,,,,EVENTOUT,,, +PortI,PI6,,,,TIM8_CH2,,,,,,,DCMI_D6,,,,,EVENTOUT,,, +PortI,PI7,,,,TIM8_CH3,,,,,,,DCMI_D7,,,,,EVENTOUT,,, +PortI,PI8,,,,,,,,,,,DCMI_D12,,,,,EVENTOUT,,, +PortI,PI9,,,,,,,,,,CAN1_RX,,,,,,EVENTOUT,,, +PortI,PI10,,,,,,,,,,,,,,,,EVENTOUT,,, +PortI,PI11,,,,,,,,,,,,,,,,EVENTOUT,,, diff --git a/ports/stm32/boards/stm32l496xg.ld b/ports/stm32/boards/stm32l496xg.ld new file mode 100644 index 000000000..88221170b --- /dev/null +++ b/ports/stm32/boards/stm32l496xg.ld @@ -0,0 +1,35 @@ +/* + GNU linker script for STM32L496XG +*/ + +/* Specify the memory areas */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K + FLASH_ISR (rx) : ORIGIN = 0x08000000, LENGTH = 16K /* sectors 0-7 */ + FLASH_TEXT (rx) : ORIGIN = 0x08004000, LENGTH = 596K /* sectors 8-305 */ + FLASH_FS (r) : ORIGIN = 0x08099000, LENGTH = 412K /* sectors 306-511 412 KiB */ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 256K + SRAM2 (xrw) : ORIGIN = 0x20040000, LENGTH = 62K /* leave 2K for flash fs cache */ + FS_CACHE(xrw) : ORIGIN = 0x2004f800, LENGTH = 2K +} + +/* produce a link error if there is not this amount of RAM for these sections */ +_minimum_stack_size = 2K; +_minimum_heap_size = 16K; + +/* Define the top end of the stack. The stack is full descending so begins just + above last byte of RAM. Note that EABI requires the stack to be 8-byte + aligned for a call. */ +_estack = ORIGIN(RAM) + LENGTH(RAM) + LENGTH(SRAM2); + +/* RAM extents for the garbage collector */ +_ram_fs_cache_start = ORIGIN(FS_CACHE); +_ram_fs_cache_block_size = LENGTH(FS_CACHE); +_ram_start = ORIGIN(RAM); +_ram_end = ORIGIN(RAM) + LENGTH(RAM) + LENGTH(SRAM2); +_heap_start = _ebss; /* heap starts just after statically allocated memory */ +_heap_end = 0x2001C000; /* tunable */ + +_flash_fs_start = ORIGIN(FLASH_FS); +_flash_fs_end = ORIGIN(FLASH_FS) + LENGTH(FLASH_FS); |