diff options
Diffstat (limited to 'shared-bindings/nativeio/__init__.c')
| -rw-r--r-- | shared-bindings/nativeio/__init__.c | 140 |
1 files changed, 0 insertions, 140 deletions
diff --git a/shared-bindings/nativeio/__init__.c b/shared-bindings/nativeio/__init__.c deleted file mode 100644 index 3287a46cd..000000000 --- a/shared-bindings/nativeio/__init__.c +++ /dev/null @@ -1,140 +0,0 @@ -/* - * This file is part of the MicroPython project, http://micropython.org/ - * - * The MIT License (MIT) - * - * Copyright (c) 2016 Scott Shawcroft for Adafruit Industries - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - */ - -// nativeio is the HAL for low-level, hardware accelerated classes. It -// is not meant to simplify APIs, its only meant to unify them so that other -// libraries do not require port specific logic. - -#include <stdint.h> - -#include "py/obj.h" -#include "py/runtime.h" - -#include "shared-bindings/microcontroller/Pin.h" -#include "shared-bindings/nativeio/__init__.h" -#include "shared-bindings/nativeio/AnalogIn.h" -#include "shared-bindings/nativeio/AnalogOut.h" -#include "shared-bindings/nativeio/DigitalInOut.h" -#include "shared-bindings/nativeio/I2C.h" -#include "shared-bindings/nativeio/OneWire.h" -#include "shared-bindings/nativeio/PulseIn.h" -#include "shared-bindings/nativeio/PulseOut.h" -#include "shared-bindings/nativeio/PWMOut.h" -#include "shared-bindings/nativeio/SPI.h" -#include "shared-bindings/nativeio/TouchIn.h" -#include "shared-bindings/nativeio/UART.h" -#include "common-hal/nativeio/types.h" -#include "shared-bindings/nativeio/__init__.h" - -#include "py/runtime.h" - -//| :mod:`nativeio` --- Hardware accelerated behavior -//| ================================================= -//| -//| .. module:: nativeio -//| :synopsis: Hardware accelerated behavior -//| :platform: SAMD21 -//| -//| The `nativeio` module contains classes to provide access to IO typically -//| accelerated by hardware on the onboard microcontroller. The classes are -//| meant to align with commonly hardware accelerated IO and not necessarily -//| match up with microcontroller structure (because it varies). -//| -//| When the microcontroller does not support the behavior in a hardware -//| accelerated fashion it may internally use a bitbang routine. However, if -//| hardware support is available on a subset of pins but not those provided, -//| then a RuntimeError will be raised. Use the `bitbangio` module to explicitly -//| bitbang a protocol on any general purpose pins. -//| -//| Libraries -//| -//| .. toctree:: -//| :maxdepth: 3 -//| -//| AnalogIn -//| AnalogOut -//| DigitalInOut -//| I2C -//| OneWire -//| PulseIn -//| PulseOut -//| PWMOut -//| SPI -//| TouchIn -//| UART -//| -//| All libraries change hardware state and should be deinitialized when they -//| are no longer needed. To do so, either call :py:meth:`!deinit` or use a -//| context manager. -//| -//| For example:: -//| -//| import nativeio -//| from board import * -//| -//| with nativeio.I2C(SCL, SDA) as i2c: -//| i2c.scan() -//| -//| This example will initialize the the device, run -//| :py:meth:`~nativeio.I2C.scan` and then :py:meth:`~nativeio.I2C.deinit` the -//| hardware. -//| -//| Here is blinky:: -//| -//| import nativeio -//| from board import * -//| import time -//| -//| with nativeio.DigitalInOut(D13) as led: -//| led.switch_to_output() -//| while True: -//| led.value = True -//| time.sleep(0.1) -//| led.value = False -//| time.sleep(0.1) -//| - -STATIC const mp_rom_map_elem_t nativeio_module_globals_table[] = { - { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_nativeio) }, - { MP_ROM_QSTR(MP_QSTR_AnalogIn), MP_ROM_PTR(&nativeio_analogin_type) }, - { MP_ROM_QSTR(MP_QSTR_AnalogOut), MP_ROM_PTR(&nativeio_analogout_type) }, - { MP_ROM_QSTR(MP_QSTR_DigitalInOut), MP_ROM_PTR(&nativeio_digitalinout_type) }, - { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&nativeio_i2c_type) }, - { MP_ROM_QSTR(MP_QSTR_OneWire), MP_ROM_PTR(&nativeio_onewire_type) }, - { MP_ROM_QSTR(MP_QSTR_PulseIn), MP_ROM_PTR(&nativeio_pulsein_type) }, - { MP_ROM_QSTR(MP_QSTR_PulseOut), MP_ROM_PTR(&nativeio_pulseout_type) }, - { MP_ROM_QSTR(MP_QSTR_PWMOut), MP_ROM_PTR(&nativeio_pwmout_type) }, - { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&nativeio_spi_type) }, - { MP_ROM_QSTR(MP_QSTR_TouchIn), MP_ROM_PTR(&nativeio_touchin_type) }, - { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&nativeio_uart_type) }, -}; - -STATIC MP_DEFINE_CONST_DICT(nativeio_module_globals, nativeio_module_globals_table); - -const mp_obj_module_t nativeio_module = { - .base = { &mp_type_module }, - .globals = (mp_obj_dict_t*)&nativeio_module_globals, -}; |