summaryrefslogtreecommitdiff
path: root/tests/wipy
diff options
context:
space:
mode:
Diffstat (limited to 'tests/wipy')
-rw-r--r--tests/wipy/i2c.py175
-rw-r--r--tests/wipy/i2c.py.exp51
-rw-r--r--tests/wipy/spi.py147
-rw-r--r--tests/wipy/spi.py.exp35
4 files changed, 0 insertions, 408 deletions
diff --git a/tests/wipy/i2c.py b/tests/wipy/i2c.py
deleted file mode 100644
index 39dcdc722..000000000
--- a/tests/wipy/i2c.py
+++ /dev/null
@@ -1,175 +0,0 @@
-'''
-I2C test for the CC3200 based boards.
-A MPU-9150 sensor must be connected to the I2C bus.
-'''
-
-from machine import I2C
-import os
-import time
-
-mch = os.uname().machine
-if 'LaunchPad' in mch:
- i2c_pins = ('GP11', 'GP10')
-elif 'WiPy' in mch:
- i2c_pins = ('GP15', 'GP10')
-else:
- raise Exception('Board not supported!')
-
-i2c = I2C(0, I2C.MASTER, baudrate=400000)
-# try initing without the peripheral id
-i2c = I2C()
-print(i2c)
-i2c = I2C(mode=I2C.MASTER, baudrate=50000, pins=i2c_pins)
-print(i2c)
-
-i2c = I2C(0, I2C.MASTER, baudrate=100000)
-print(i2c)
-i2c = I2C(0, mode=I2C.MASTER, baudrate=400000)
-print(i2c)
-i2c = I2C(0, mode=I2C.MASTER, baudrate=400000, pins=i2c_pins)
-print(i2c)
-
-addr = i2c.scan()[0]
-print(addr)
-
-reg = bytearray(1)
-reg2 = bytearray(2)
-reg2_r = bytearray(2)
-
-# reset the sensor
-reg[0] |= 0x80
-print(1 == i2c.writeto_mem(addr, 107, reg))
-time.sleep_ms(100) # wait for the sensor to reset...
-
-print(1 == i2c.readfrom_mem_into(addr, 107, reg)) # read the power management register 1
-print(0x40 == reg[0])
-
-# now just read one byte
-data = i2c.readfrom_mem(addr, 117, 1) # read the "who am I?" register
-print(0x68 == data[0])
-print(len(data) == 1)
-print(1 == i2c.readfrom_mem_into(addr, 117, reg)) # read the "who am I?" register again
-print(0x68 == reg[0])
-
-# now try reading two bytes
-data = i2c.readfrom_mem(addr, 116, 2) # read the "who am I?" register
-print(0x68 == data[1])
-print(data == b'\x00\x68')
-print(len(data) == 2)
-print(2 == i2c.readfrom_mem_into(addr, 116, reg2)) # read the "who am I?" register again
-print(0x68 == reg2[1])
-print(reg2 == b'\x00\x68')
-
-print(1 == i2c.readfrom_mem_into(addr, 107, reg)) # read the power management register 1
-print(0x40 == reg[0])
-# clear the sleep bit
-reg[0] = 0
-print(1 == i2c.writeto_mem(addr, 107, reg))
-# read it back
-i2c.readfrom_mem_into(addr, 107, reg)
-print(0 == reg[0])
-
-# set the sleep bit
-reg[0] = 0x40
-print(1 == i2c.writeto_mem(addr, 107, reg))
-# read it back
-i2c.readfrom_mem_into(addr, 107, reg)
-print(0x40 == reg[0])
-
-# reset the sensor
-reg[0] |= 0x80
-print(1 == i2c.writeto_mem(addr, 107, reg))
-time.sleep_ms(100) # wait for the sensor to reset...
-
-# now read and write two register at a time
-print(2 == i2c.readfrom_mem_into(addr, 107, reg2))
-print(0x40 == reg2[0])
-print(0x00 == reg2[1])
-# clear the sleep bit
-reg2[0] = 0
-# set some other bits
-reg2[1] |= 0x03
-print(2 == i2c.writeto_mem(addr, 107, reg2))
-# read it back
-i2c.readfrom_mem_into(addr, 107, reg2_r)
-print(reg2 == reg2_r)
-
-# reset the sensor
-reg[0] = 0x80
-print(1 == i2c.writeto_mem(addr, 107, reg))
-time.sleep_ms(100) # wait for the sensor to reset...
-
-# try some raw read and writes
-reg[0] = 117 # register address
-print(1 == i2c.writeto(addr, reg, stop=False)) # just write the register address
-# now read
-print(1 == i2c.readfrom_into(addr, reg))
-print(reg[0] == 0x68)
-reg[0] = 117 # register address
-print(1 == i2c.writeto(addr, reg, stop=False)) # just write the register address
-# now read
-print(0x68 == i2c.readfrom(addr, 1)[0])
-
-i2c.readfrom_mem_into(addr, 107, reg2)
-print(0x40 == reg2[0])
-print(0x00 == reg2[1])
-
-reg2[0] = 107 # register address
-reg2[1] = 0
-print(2 == i2c.writeto(addr, reg2, stop=True)) # write the register address and the data
-i2c.readfrom_mem_into(addr, 107, reg) # check it back
-print(reg[0] == 0)
-
-# check for memory leaks...
-for i in range (0, 1000):
- i2c = I2C(0, I2C.MASTER, baudrate=100000)
-
-# test deinit
-i2c = I2C(0, I2C.MASTER, baudrate=100000)
-i2c.deinit()
-print(i2c)
-
-# next ones should raise
-try:
- i2c.scan()
-except Exception:
- print("Exception")
-
-try:
- i2c.readfrom(addr, 1)
-except Exception:
- print("Exception")
-
-try:
- i2c.readfrom_into(addr, reg)
-except Exception:
- print("Exception")
-
-try:
- i2c.readfrom_mem_into(addr, 107, reg)
-except Exception:
- print("Exception")
-
-try:
- i2c.writeto(addr, reg, stop=False)
-except Exception:
- print("Exception")
-
-try:
- i2c.writeto_mem(addr, 107, reg)
-except Exception:
- print("Exception")
-
-try:
- i2c.readfrom_mem(addr, 116, 2)
-except Exception:
- print("Exception")
-
-try:
- I2C(1, I2C.MASTER, baudrate=100000)
-except Exception:
- print("Exception")
-
-# reinitialization must work
-i2c.init(baudrate=400000)
-print(i2c)
diff --git a/tests/wipy/i2c.py.exp b/tests/wipy/i2c.py.exp
deleted file mode 100644
index 083da9be7..000000000
--- a/tests/wipy/i2c.py.exp
+++ /dev/null
@@ -1,51 +0,0 @@
-I2C(0, I2C.MASTER, baudrate=100000)
-I2C(0, I2C.MASTER, baudrate=50000)
-I2C(0, I2C.MASTER, baudrate=100000)
-I2C(0, I2C.MASTER, baudrate=400000)
-I2C(0, I2C.MASTER, baudrate=400000)
-104
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-I2C(0)
-Exception
-Exception
-Exception
-Exception
-Exception
-Exception
-Exception
-Exception
-I2C(0, I2C.MASTER, baudrate=400000)
diff --git a/tests/wipy/spi.py b/tests/wipy/spi.py
deleted file mode 100644
index 6bd7aabce..000000000
--- a/tests/wipy/spi.py
+++ /dev/null
@@ -1,147 +0,0 @@
-'''
-SPI test for the CC3200 based boards.
-'''
-
-from machine import SPI
-import os
-
-mch = os.uname().machine
-if 'LaunchPad' in mch:
- spi_pins = ('GP14', 'GP16', 'GP30')
-elif 'WiPy' in mch:
- spi_pins = ('GP14', 'GP16', 'GP30')
-else:
- raise Exception('Board not supported!')
-
-spi = SPI(0, SPI.MASTER, baudrate=2000000, polarity=0, phase=0, firstbit=SPI.MSB, pins=spi_pins)
-print(spi)
-spi = SPI(baudrate=5000000)
-print(spi)
-spi = SPI(0, SPI.MASTER, baudrate=200000, bits=16, polarity=0, phase=0)
-print(spi)
-spi = SPI(0, SPI.MASTER, baudrate=10000000, polarity=0, phase=1)
-print(spi)
-spi = SPI(0, SPI.MASTER, baudrate=5000000, bits=32, polarity=1, phase=0)
-print(spi)
-spi = SPI(0, SPI.MASTER, baudrate=10000000, polarity=1, phase=1)
-print(spi)
-spi.init(baudrate=20000000, polarity=0, phase=0)
-print(spi)
-spi=SPI()
-print(spi)
-SPI(mode=SPI.MASTER)
-SPI(mode=SPI.MASTER, pins=spi_pins)
-SPI(id=0, mode=SPI.MASTER, polarity=0, phase=0, pins=('GP14', 'GP16', 'GP15'))
-SPI(0, SPI.MASTER, polarity=0, phase=0, pins=('GP31', 'GP16', 'GP15'))
-
-spi = SPI(0, SPI.MASTER, baudrate=10000000, polarity=0, phase=0, pins=spi_pins)
-print(spi.write('123456') == 6)
-buffer_r = bytearray(10)
-print(spi.readinto(buffer_r) == 10)
-print(spi.readinto(buffer_r, write=0x55) == 10)
-read = spi.read(10)
-print(len(read) == 10)
-read = spi.read(10, write=0xFF)
-print(len(read) == 10)
-buffer_w = bytearray([1, 2, 3, 4, 5, 6, 7, 8, 9, 0])
-print(spi.write_readinto(buffer_w, buffer_r) == 10)
-print(buffer_w == buffer_r)
-
-# test all polaritiy and phase combinations
-spi.init(polarity=1, phase=0, pins=None)
-buffer_r = bytearray(10)
-spi.write_readinto(buffer_w, buffer_r)
-print(buffer_w == buffer_r)
-
-spi.init(polarity=1, phase=1, pins=None)
-buffer_r = bytearray(10)
-spi.write_readinto(buffer_w, buffer_r)
-print(buffer_w == buffer_r)
-
-spi.init(polarity=0, phase=1, pins=None)
-buffer_r = bytearray(10)
-spi.write_readinto(buffer_w, buffer_r)
-print(buffer_w == buffer_r)
-
-# test 16 and 32 bit transfers
-buffer_w = bytearray([1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 1, 2])
-buffer_r = bytearray(12)
-spi.init(SPI.MASTER, baudrate=10000000, bits=16, polarity=0, phase=0, pins=None)
-print(spi.write_readinto(buffer_w, buffer_r) == 12)
-print(buffer_w == buffer_r)
-
-buffer_r = bytearray(12)
-spi.init(SPI.MASTER, baudrate=10000000, bits=32, polarity=0, phase=0, pins=None)
-print(spi.write_readinto(buffer_w, buffer_r) == 12)
-print(buffer_w == buffer_r)
-
-# check for memory leaks...
-for i in range (0, 1000):
- spi = SPI(0, SPI.MASTER, baudrate=1000000)
-
-# test deinit
-spi = SPI(0, SPI.MASTER, baudrate=1000000)
-spi.deinit()
-print(spi)
-
-spi = SPI(0, SPI.MASTER, baudrate=1000000)
-# next ones must fail
-try:
- spi = SPI(0, 10, baudrate=10000000, polarity=0, phase=0)
-except:
- print("Exception")
-
-try:
- spi = SPI(0, mode=SPI.MASTER, baudrate=10000000, polarity=1, phase=2)
-except:
- print("Exception")
-
-try:
- spi = SPI(1, mode=SPI.MASTER, baudrate=10000000, polarity=1, phase=1)
-except:
- print("Exception")
-
-try:
- spi = SPI(0, mode=SPI.MASTER, baudrate=2000000, polarity=2, phase=0)
-except:
- print("Exception")
-
-try:
- spi = SPI(0, mode=SPI.MASTER, baudrate=2000000, polarity=2, phase=0, firstbit=2)
-except:
- print("Exception")
-
-try:
- spi = SPI(0, mode=SPI.MASTER, baudrate=2000000, polarity=2, phase=0, pins=('GP1', 'GP2'))
-except:
- print("Exception")
-
-try:
- spi = SPI(0, mode=SPI.MASTER, baudrate=2000000, polarity=0, phase=0, bits=9)
-except:
- print("Exception")
-
-spi.deinit()
-try:
- spi.read(15)
-except Exception:
- print("Exception")
-
-try:
- spi.spi.readinto(buffer_r)
-except Exception:
- print("Exception")
-
-try:
- spi.spi.write('abc')
-except Exception:
- print("Exception")
-
-try:
- spi.write_readinto(buffer_w, buffer_r)
-except Exception:
- print("Exception")
-
-# reinitialization must work
-spi.init(baudrate=500000)
-print(spi)
diff --git a/tests/wipy/spi.py.exp b/tests/wipy/spi.py.exp
deleted file mode 100644
index cc4ff4022..000000000
--- a/tests/wipy/spi.py.exp
+++ /dev/null
@@ -1,35 +0,0 @@
-SPI(0, SPI.MASTER, baudrate=2000000, bits=8, polarity=0, phase=0, firstbit=SPI.MSB)
-SPI(0, SPI.MASTER, baudrate=5000000, bits=8, polarity=0, phase=0, firstbit=SPI.MSB)
-SPI(0, SPI.MASTER, baudrate=200000, bits=16, polarity=0, phase=0, firstbit=SPI.MSB)
-SPI(0, SPI.MASTER, baudrate=10000000, bits=8, polarity=0, phase=1, firstbit=SPI.MSB)
-SPI(0, SPI.MASTER, baudrate=5000000, bits=32, polarity=1, phase=0, firstbit=SPI.MSB)
-SPI(0, SPI.MASTER, baudrate=10000000, bits=8, polarity=1, phase=1, firstbit=SPI.MSB)
-SPI(0, SPI.MASTER, baudrate=20000000, bits=8, polarity=0, phase=0, firstbit=SPI.MSB)
-SPI(0, SPI.MASTER, baudrate=1000000, bits=8, polarity=0, phase=0, firstbit=SPI.MSB)
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-True
-SPI(0)
-Exception
-Exception
-Exception
-Exception
-Exception
-Exception
-Exception
-Exception
-Exception
-Exception
-Exception
-SPI(0, SPI.MASTER, baudrate=500000, bits=8, polarity=0, phase=0, firstbit=SPI.MSB)
generated by cgit v1.2.3 (git 2.39.1) at 2026-08-07 12:38:34 +0000