Try moving the archive down a level.

1 files changed, 0 insertions, 96 deletions

diff --git a/docs/buildnotes/CircuitPythonBuildServerNotes.md b/docs/buildnotes/CircuitPythonBuildServerNotes.md
deleted file mode 100644
index baa5617..0000000
--- a/docs/buildnotes/CircuitPythonBuildServerNotes.md
+++ /dev/null
@@ -1,96 +0,0 @@
-# Building Circuit Python.
-
-I was looking at adafruits circuit python as a possible platform fo replace the missing link using either the rpi2040 or the esp32s2. Unfortunately the usb stacks supported are different so I knew I would have to build what I want from scratch. I am not sure that this isnt a rathole.
-
-[https://learn.adafruit.com/building-circuitpython/build-circuitpython](https://learn.adafruit.com/building-circuitpython/build-circuitpython)
-
-### Building on Sandbox (ubuntu focal)
-Circuitpython for most processors requires more than a few dependencies. 
-
-```
-sudo apt-get install build-essential git gettext uncrustify python3-pip
-sudo apt-get install python3-setuptools cmake ninja-build ccache libffi-dev libssl-dev dfu-util libusb-1.0-0
-sudo pip3 install cascadetoml
-sudo apt-get install gcc-arm-none-eabi
-```
-
-This should allow you to check out the source code for circuitpython as a user. As per their suggestions I forked the repo first.
-
-```
-git clone git@github.com:suspect-devices/circuitpython.git
-cd circuitpython/
-git submodule sync --quiet --recursive
-git submodule update --init
-```
-Once there you can install further dependencies.
-
-```
-sudo pip3 install -r requirements-dev.txt 
-sudo make -C mpy-cross
-```
-At which point you can build firmware for most targets.
-
-```
-cd ports/raspberrypi/
-make BOARD=adafruit_feather_rp2040
-cd build-adafruit_feather_rp2040/
-```
-#### Adding the Espressif toolchain and idf
-
-``` 
-cd /home/feurig/circuitpython/ports/esp32s2# 
-sudo esp-idf/install.sh 
-```
-
-
-### First attempt.
-On my first attemp I was only interested in building for the esp32s2. I ran everything as root including the builds. It is better to separate privilages with anything this large where you are building for a different target. 
-
-```
-root@viva:# apt-get install git wget flex bison gperf python3 python3-pip python3-setuptools cmake ninja-build ccache libffi-dev libssl-dev dfu-util libusb-1.0-0
-...
-root@viva:/home/feurig# mkdir -p ~/esp
-root@viva:/home/feurig# cd ~/esp
-root@viva:~/esp# git clone --recursive https://github.com/espressif/esp-idf.git
-Cloning into 'esp-idf'...
-...
-root@viva:~/esp# cd esp-idf/
-root@viva:~/esp/esp-idf# ./install.sh 
-...
-All done! You can now run:
-
-  . ./export.sh
-
-root@viva:~/esp/esp-idf# . ./export.sh
-...
-root@viva:~# cd /home/feurig/circuitpython/
-root@viva:/home/feurig/circuitpython# cd ports/
-root@viva:/home/feurig/circuitpython/ports# cd esp32s2/
-root@viva:/home/feurig/circuitpython/ports/esp32s2# make BOARD=unexpectedmaker_feathers2
-...
-Wrote 2601984 bytes to build-unexpectedmaker_feathers2/firmware.uf2
-root@viva:/home/feurig/circuitpython/ports/esp32s2# 
-
-```
-Then as a comparison I built for the adafruit feather rp2040.
-
-```
-root@viva:/home/feurig/circuitpython/ports# cd raspberrypi/
-root@viva:/home/feurig/circuitpython/ports/raspberrypi# ls boards/
-adafruit_feather_rp2040    pimoroni_keybow2040  raspberry_pi_pico
-adafruit_itsybitsy_rp2040  pimoroni_picosystem  sparkfun_pro_micro_rp2040
-adafruit_qtpy_rp2040       pimoroni_tiny2040    sparkfun_thing_plus_rp2040
-root@viva:/home/feurig/circuitpython/ports/raspberrypi# make BOARD=adafruit_feather_rp2040
-Use make V=1, make V=2 or set BUILD_VERBOSE similarly in your environment to increase build verbosity.
-QSTR updated
-Traceback (most recent call last):
-  File "gen_stage2.py", line 2, in <module>
-    import cascadetoml
-ModuleNotFoundError: No module named 'cascadetoml'
-root@viva:/home/feurig/circuitpython/ports/raspberrypi# pip3 install cascadetoml
-...
-root@viva:/home/feurig/circuitpython/ports/raspberrypi# make BOARD=adafruit_feather_rp2040
-...
-Wrote 1259520 bytes to build-adafruit_feather_rp2040/firmware.uf2
-root@viva:/home/feurig/circuitpython/ports/raspberrypi#  
-```
\ No newline at end of file