move csource and core into place

1 files changed, 758 insertions, 0 deletions

diff --git a/msp430/libraries/IRremote/IRremote.cpp b/msp430/libraries/IRremote/IRremote.cpp
new file mode 100644
index 0000000..18d0209
--- /dev/null
+++ b/msp430/libraries/IRremote/IRremote.cpp
@@ -0,0 +1,758 @@
+/*
+ * IRremote
+ * Version 0.11 August, 2009
+ * Copyright 2009 Ken Shirriff
+ * For details, see http://arcfn.com/2009/08/multi-protocol-infrared-remote-library.html
+ *
+ * Modified by Paul Stoffregen <paul@pjrc.com> to support other boards and timers
+ *
+ * Interrupt code based on NECIRrcv by Joe Knapp
+ * http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1210243556
+ * Also influenced by http://zovirl.com/2008/11/12/building-a-universal-remote-with-an-arduino/
+ */
+
+#include "IRremote.h"
+#include "IRremoteInt.h"
+
+volatile irparams_t irparams;
+
+// These versions of MATCH, MATCH_MARK, and MATCH_SPACE are only for debugging.
+// To use them, set DEBUG in IRremoteInt.h
+// Normally macros are used for efficiency
+
+int MATCH(int measured, int desired) {
+  #ifdef DEBUG
+  Serial.print("Testing: ");
+  Serial.print(TICKS_LOW(desired), DEC);
+  Serial.print(" <= ");
+  Serial.print(measured, DEC);
+  Serial.print(" <= ");
+  Serial.println(TICKS_HIGH(desired), DEC);
+  #endif
+  return measured >= TICKS_LOW(desired) && measured <= TICKS_HIGH(desired);
+}
+
+int MATCH_MARK(int measured_ticks, int desired_us) {
+  #ifdef DEBUG
+  Serial.print("Testing mark ");
+  Serial.print(measured_ticks * USECPERTICK, DEC);
+  Serial.print(" vs ");
+  Serial.print(desired_us, DEC);
+  Serial.print(": ");
+  Serial.print(TICKS_LOW(desired_us - MARK_EXCESS), DEC); // SH 071112 + -> -
+  Serial.print(" <= ");
+  Serial.print(measured_ticks, DEC);
+  Serial.print(" <= ");
+  Serial.println(TICKS_HIGH(desired_us + MARK_EXCESS), DEC);
+  #endif
+  return measured_ticks >= TICKS_LOW(desired_us - MARK_EXCESS) && measured_ticks <= TICKS_HIGH(desired_us + MARK_EXCESS); // SH 071112 + -> - in TICKS_LOW
+}
+
+int MATCH_SPACE(int measured_ticks, int desired_us) {
+  #ifdef DEBUG
+  Serial.print("Testing space ");
+  Serial.print(measured_ticks * USECPERTICK, DEC);
+  Serial.print(" vs ");
+  Serial.print(desired_us, DEC);
+  Serial.print(": ");
+  Serial.print(TICKS_LOW(desired_us - MARK_EXCESS), DEC);
+  Serial.print(" <= ");
+  Serial.print(measured_ticks, DEC);
+  Serial.print(" <= ");
+  Serial.println(TICKS_HIGH(desired_us + MARK_EXCESS), DEC); // SH 071112 - -> +
+  #endif
+  return measured_ticks >= TICKS_LOW(desired_us - MARK_EXCESS) && measured_ticks <= TICKS_HIGH(desired_us + MARK_EXCESS); // SH 071112 - -> + in TICKS_HIGH
+}
+
+// Soojin Han: this function is for serial debug interface
+void debug_print(const char *data)
+{
+	#ifdef DEBUG
+	delay(100);
+	Serial.println(data);
+	#endif
+}
+
+void IRsend::sendNEC(unsigned long data, int nbits)
+{
+  enableIROut(38);
+  mark(NEC_HDR_MARK);
+  space(NEC_HDR_SPACE);
+  for (int i = 0; i < nbits; i++) {
+    if (data & TOPBIT) {
+      mark(NEC_BIT_MARK);
+      space(NEC_ONE_SPACE);
+    } 
+    else {
+      mark(NEC_BIT_MARK);
+      space(NEC_ZERO_SPACE);
+    }
+    data <<= 1;
+  }
+  mark(NEC_BIT_MARK);
+  space(0);
+}
+
+void IRsend::sendSony(unsigned long data, int nbits) {
+  enableIROut(40);
+  mark(SONY_HDR_MARK);
+  space(SONY_HDR_SPACE);
+  data = data << (32 - nbits);
+  for (int i = 0; i < nbits; i++) {
+    if (data & TOPBIT) {
+      mark(SONY_ONE_MARK);
+      space(SONY_HDR_SPACE);
+    } 
+    else {
+      mark(SONY_ZERO_MARK);
+      space(SONY_HDR_SPACE);
+    }
+    data <<= 1;
+  }
+}
+
+void IRsend::sendRaw(unsigned int buf[], int len, int hz)
+{
+  enableIROut(hz);
+  for (int i = 0; i < len; i++) {
+    if (i & 1) {
+      space(buf[i]);
+    } 
+    else {
+      mark(buf[i]);
+    }
+  }
+  space(0); // Just to be sure
+}
+
+// Note: first bit must be a one (start bit)
+void IRsend::sendRC5(unsigned long data, int nbits)
+{
+  enableIROut(36);
+  data = data << (32 - nbits);
+  mark(RC5_T1); // First start bit
+  space(RC5_T1); // Second start bit
+  mark(RC5_T1); // Second start bit
+  for (int i = 0; i < nbits; i++) {
+    if (data & TOPBIT) {
+      space(RC5_T1); // 1 is space, then mark
+      mark(RC5_T1);
+    } 
+    else {
+      mark(RC5_T1);
+      space(RC5_T1);
+    }
+    data <<= 1;
+  }
+  space(0); // Turn off at end
+}
+
+// Caller needs to take care of flipping the toggle bit
+void IRsend::sendRC6(unsigned long data, int nbits)
+{
+  enableIROut(36);
+  data = data << (32 - nbits);
+  mark(RC6_HDR_MARK);
+  space(RC6_HDR_SPACE);
+  mark(RC6_T1); // start bit
+  space(RC6_T1);
+  int t;
+  for (int i = 0; i < nbits; i++) {
+    if (i == 3) {
+      // double-wide trailer bit
+      t = 2 * RC6_T1;
+    } 
+    else {
+      t = RC6_T1;
+    }
+    if (data & TOPBIT) {
+      mark(t);
+      space(t);
+    } 
+    else {
+      space(t);
+      mark(t);
+    }
+
+    data <<= 1;
+  }
+  space(0); // Turn off at end
+}
+
+
+void IRsend::mark(int time) {
+  // Sends an IR mark for the specified number of microseconds.
+  // The mark output is modulated at the PWM frequency.
+  TIMER_ENABLE_PWM; // Set SMCLK, Up mode
+  delayMicroseconds(time);
+}
+
+/* Leave pin off for time (given in microseconds) */
+void IRsend::space(int time) {
+  // Sends an IR space for the specified number of microseconds.
+  // A space is no output, so the PWM output is disabled.
+  TIMER_DISABLE_PWM; // Set SMCLK, Stop mode
+  delayMicroseconds(time);
+}
+
+// TODO: update the comments below
+
+void IRsend::enableIROut(int khz) {
+  // Enables IR output.  The khz value controls the modulation frequency in kilohertz.
+  // The IR output will be on pin 3 (OC2B).
+  // This routine is designed for 36-40KHz; if you use it for other values, it's up to you
+  // to make sure it gives reasonable results.  (Watch out for overflow / underflow / rounding.)
+  // TIMER2 is used in phase-correct PWM mode, with OCR2A controlling the frequency and OCR2B
+  // controlling the duty cycle.
+  // There is no prescaling, so the output frequency is 16MHz / (2 * OCR2A)
+  // To turn the output on and off, we leave the PWM running, but connect and disconnect the output pin.
+  // A few hours staring at the ATmega documentation and this will all make sense.
+  // See my Secrets of Arduino PWM at http://arcfn.com/2009/07/secrets-of-arduino-pwm.html for details.
+
+  
+  // Disable the Timer_A Interrupt (which is used for receiving IR)
+  TIMER_DISABLE_INTR; //Timer_A Overflow Interrupt
+  
+  TIMER_PIN_SELECT(); // P2.3 output and P2.3 option select (when TIMER_PWM_PIN is P2_3)
+
+  pinMode(TIMER_PWM_PIN, OUTPUT);
+  digitalWrite(TIMER_PWM_PIN, LOW); // When not sending PWM, we want it low
+
+  // TODO: update the comments below
+
+  // COM2B = 00: disconnect OC2B; to send signal set to 10: OC2B non-inverted
+  // WGM2 = 101: phase-correct PWM with OCRA as top
+  // CS2 = 000: no prescaling
+  // The top value for the timer.  The modulation frequency will be SYSCLOCK / 2 / OCR2A.
+  TIMER_CONFIG_KHZ(khz);
+}
+
+IRrecv::IRrecv(int recvpin)
+{
+  irparams.recvpin = recvpin;
+  irparams.blinkflag = 0;
+}
+
+// initialization
+void IRrecv::enableIRIn() {
+  _DINT();   // disable interrupts
+  // setup pulse clock timer interrupt
+  
+  //Prescale /8 (16M/8 = 0.5 microseconds per tick)
+  // Therefore, the timer interval can range from 0.5 to 128 microseconds
+  // depending on the reset value (255 to 0)
+  TIMER_CONFIG_NORMAL();
+  
+  //Timer_A Overflow Interrupt Enable
+  TIMER_ENABLE_INTR;
+  
+  TIMER_RESET;
+
+  _EINT();  // enable interrupts
+
+  // initialize state machine variables
+  irparams.rcvstate = STATE_IDLE;
+  irparams.rawlen = 0;
+
+  // set pin modes
+  pinMode(irparams.recvpin, INPUT);
+}
+
+// enable/disable blinking of pin 13 on IR processing
+void IRrecv::blink13(int blinkflag)
+{
+  irparams.blinkflag = blinkflag;
+  if (blinkflag)
+    pinMode(BLINKLED, OUTPUT);
+}
+
+// TIMERA interrupt code to collect raw data.
+// Widths of alternating SPACE, MARK are recorded in rawbuf.
+// Recorded in ticks of 50 microseconds.
+// rawlen counts the number of entries recorded so far.
+// First entry is the SPACE between transmissions.
+// As soon as a SPACE gets long, ready is set, state switches to IDLE, timing of SPACE continues.
+// As soon as first MARK arrives, gap width is recorded, ready is cleared, and new logging starts
+__attribute__((interrupt(TIMER_INTR_NAME)))
+void IRrecv::RecvIsr(void)
+{
+  TIMER_RESET;
+  //P2DIR |= BIT0 | BIT1 | BIT2;
+  // P2OUT ^= BIT2;
+
+  uint8_t irdata = (uint8_t)digitalRead(irparams.recvpin);
+
+  irparams.timer++; // One more 50us tick
+  if (irparams.rawlen >= RAWBUF) {
+    // Buffer overflow
+      irparams.rcvstate = STATE_STOP;
+  }
+  switch(irparams.rcvstate) {
+  case STATE_IDLE: // In the middle of a gap
+    //P2OUT |= BIT0;
+    //P2OUT &= ~BIT1;
+    //P2OUT &= ~BIT2;
+
+      if (irdata == MARK) {
+      if (irparams.timer < GAP_TICKS) {
+        // Not big enough to be a gap.
+        irparams.timer = 0;
+      } 
+      else {
+        // gap just ended, record duration and start recording transmission
+        irparams.rawlen = 0;
+        irparams.rawbuf[irparams.rawlen++] = irparams.timer;
+        irparams.timer = 0;
+        irparams.rcvstate = STATE_MARK;
+      }
+    }
+    break;
+  case STATE_MARK: // timing MARK
+      if (irdata == SPACE) {   // MARK ended, record time
+      irparams.rawbuf[irparams.rawlen++] = irparams.timer;
+      irparams.timer = 0;
+      irparams.rcvstate = STATE_SPACE;
+    }
+    break;
+  case STATE_SPACE: // timing SPACE
+      if (irdata == MARK) { // SPACE just ended, record it
+      irparams.rawbuf[irparams.rawlen++] = irparams.timer;
+      irparams.timer = 0;
+      irparams.rcvstate = STATE_MARK;
+    } 
+    else { // SPACE
+      if (irparams.timer > GAP_TICKS) {
+        // big SPACE, indicates gap between codes
+        // Mark current code as ready for processing
+        // Switch to STOP
+        // Don't reset timer; keep counting space width
+        irparams.rcvstate = STATE_STOP;
+      } 
+    }
+    break;
+  case STATE_STOP: // waiting, measuring gap
+      if (irdata == MARK) { // reset gap timer
+      irparams.timer = 0;
+    }
+    break;
+  }
+
+  if (irparams.blinkflag) {
+    if (irdata == MARK) {
+      BLINKLED_ON();  // turn pin 13 LED on
+    } 
+    else {
+      BLINKLED_OFF();  // turn pin 13 LED off
+    }
+  }
+}
+
+void IRrecv::resume() {
+  irparams.rcvstate = STATE_IDLE;
+  irparams.rawlen = 0;
+}
+
+
+
+// Decodes the received IR message
+// Returns 0 if no data ready, 1 if data ready.
+// Results of decoding are stored in results
+int IRrecv::decode(decode_results *results) {
+  results->rawbuf = irparams.rawbuf;
+  results->rawlen = irparams.rawlen;
+ 
+  if (irparams.rcvstate != STATE_STOP) {
+    return ERR;
+  }
+ /* 
+   #ifdef DEBUG
+  if (results->rawlen != 0){
+	Serial.print("results->rawlen: ");
+	Serial.println(irparams.rawlen);
+  }
+  #endif
+  */
+#ifdef DEBUG
+  Serial.println("Attempting NEC decode");
+#endif
+  if (decodeNEC(results)) {
+    return DECODED;
+  }
+#ifdef DEBUG
+  Serial.println("Attempting Sony decode");
+#endif
+  if (decodeSony(results)) {
+    return DECODED;
+  }
+#ifdef DEBUG
+  Serial.println("Attempting RC5 decode");
+#endif  
+  if (decodeRC5(results)) {
+    return DECODED;
+  }
+#ifdef DEBUG
+  Serial.println("Attempting RC6 decode");
+#endif 
+  if (decodeRC6(results)) {
+    return DECODED;
+  }
+  // decodeHash returns a hash on any input.
+  // Thus, it needs to be last in the list.
+  // If you add any decodes, add them before this.
+  if (decodeHash(results)) {
+    return DECODED;
+  }
+  // Throw away and start over
+  resume();
+  debug_print("ERR in IRrecv::decode");
+  return ERR;
+}
+
+long IRrecv::decodeNEC(decode_results *results) {
+  long data = 0;
+  int offset = 1; // Skip first space
+  // Initial mark
+  if (!MATCH_MARK(results->rawbuf[offset], NEC_HDR_MARK)) {
+    return ERR;
+  }
+  offset++;
+  // Check for repeat
+  if (irparams.rawlen == 4 &&
+    MATCH_SPACE(results->rawbuf[offset], NEC_RPT_SPACE) &&
+    MATCH_MARK(results->rawbuf[offset+1], NEC_BIT_MARK)) {
+    results->bits = 0;
+    results->value = REPEAT;
+    results->decode_type = NEC;
+    return DECODED;
+  }
+  if (irparams.rawlen < 2 * NEC_BITS + 4) {
+    return ERR;
+  }
+  // Initial space  
+  if (!MATCH_SPACE(results->rawbuf[offset], NEC_HDR_SPACE)) {
+    return ERR;
+  }
+  offset++;
+  for (int i = 0; i < NEC_BITS; i++) {
+    if (!MATCH_MARK(results->rawbuf[offset], NEC_BIT_MARK)) {
+      return ERR;
+    }
+    offset++;
+    if (MATCH_SPACE(results->rawbuf[offset], NEC_ONE_SPACE)) {
+      data = (data << 1) | 1;
+    } 
+    else if (MATCH_SPACE(results->rawbuf[offset], NEC_ZERO_SPACE)) {
+      data <<= 1;
+    } 
+    else {
+      return ERR;
+    }
+    offset++;
+  }
+  // Success
+  results->bits = NEC_BITS;
+  results->value = data;
+  results->decode_type = NEC;
+  return DECODED;
+}
+
+long IRrecv::decodeSony(decode_results *results) {
+  long data = 0;
+  if (irparams.rawlen < 2 * SONY_BITS + 2) {
+    return ERR;
+  }
+  int offset = 1; // Skip first space
+  // Initial mark
+  if (!MATCH_MARK(results->rawbuf[offset], SONY_HDR_MARK)) {
+    return ERR;
+  }
+  offset++;
+
+  while (offset + 1 < irparams.rawlen) {
+    if (!MATCH_SPACE(results->rawbuf[offset], SONY_HDR_SPACE)) {
+      break;
+    }
+    offset++;
+    if (MATCH_MARK(results->rawbuf[offset], SONY_ONE_MARK)) {
+      data = (data << 1) | 1;
+    } 
+    else if (MATCH_MARK(results->rawbuf[offset], SONY_ZERO_MARK)) {
+      data <<= 1;
+    } 
+    else {
+      return ERR;
+    }
+    offset++;
+  }
+
+  // Success
+  results->bits = (offset - 1) / 2;
+  if (results->bits < 12) {
+    results->bits = 0;
+    return ERR;
+  }
+  results->value = data;
+  results->decode_type = SONY;
+  return DECODED;
+}
+
+// Gets one undecoded level at a time from the raw buffer.
+// The RC5/6 decoding is easier if the data is broken into time intervals.
+// E.g. if the buffer has MARK for 2 time intervals and SPACE for 1,
+// successive calls to getRClevel will return MARK, MARK, SPACE.
+// offset and used are updated to keep track of the current position.
+// t1 is the time interval for a single bit in microseconds.
+// Returns -1 for error (measured time interval is not a multiple of t1).
+int IRrecv::getRClevel(decode_results *results, int *offset, int *used, int t1) {
+  if (*offset >= results->rawlen) {
+    // After end of recorded buffer, assume SPACE.
+    return SPACE;
+  }
+  int width = results->rawbuf[*offset];
+  int val = ((*offset) % 2) ? MARK : SPACE;
+  int correction = (val == MARK) ? MARK_EXCESS : - MARK_EXCESS;
+
+  int avail;
+  if (MATCH(width, t1 + correction)) {
+    avail = 1;
+  } 
+  else if (MATCH(width, 2*t1 + correction)) {
+    avail = 2;
+  } 
+  else if (MATCH(width, 3*t1 + correction)) {
+    avail = 3;
+  } 
+  else {
+    return -1;
+  }
+
+  (*used)++;
+  if (*used >= avail) {
+    *used = 0;
+    (*offset)++;
+  }
+#ifdef DEBUG
+  if (val == MARK) {
+    Serial.println("MARK");
+  } 
+  else {
+    Serial.println("SPACE");
+  }
+#endif
+  return val;   
+}
+
+long IRrecv::decodeRC5(decode_results *results) {
+  if (irparams.rawlen < MIN_RC5_SAMPLES + 2) {
+    return ERR;
+  }
+  int offset = 1; // Skip gap space
+  long data = 0;
+  int used = 0;
+  // Get start bits
+  if (getRClevel(results, &offset, &used, RC5_T1) != MARK) return ERR;
+  if (getRClevel(results, &offset, &used, RC5_T1) != SPACE) return ERR;
+  if (getRClevel(results, &offset, &used, RC5_T1) != MARK) return ERR;
+  int nbits;
+  for (nbits = 0; offset < irparams.rawlen; nbits++) {
+    int levelA = getRClevel(results, &offset, &used, RC5_T1); 
+    int levelB = getRClevel(results, &offset, &used, RC5_T1);
+    if (levelA == SPACE && levelB == MARK) {
+      // 1 bit
+      data = (data << 1) | 1;
+    } 
+    else if (levelA == MARK && levelB == SPACE) {
+      // zero bit
+      data <<= 1;
+    } 
+    else {
+      return ERR;
+    } 
+  }
+
+  // Success
+  results->bits = nbits;
+  results->value = data;
+  results->decode_type = RC5;
+  return DECODED;
+}
+
+long IRrecv::decodeRC6(decode_results *results) {
+  if (results->rawlen < MIN_RC6_SAMPLES) {
+    return ERR;
+  }
+  int offset = 1; // Skip first space
+  // Initial mark
+  if (!MATCH_MARK(results->rawbuf[offset], RC6_HDR_MARK)) {
+    return ERR;
+  }
+  offset++;
+  if (!MATCH_SPACE(results->rawbuf[offset], RC6_HDR_SPACE)) {
+    return ERR;
+  }
+  offset++;
+  long data = 0;
+  int used = 0;
+  // Get start bit (1)
+  if (getRClevel(results, &offset, &used, RC6_T1) != MARK) return ERR;
+  if (getRClevel(results, &offset, &used, RC6_T1) != SPACE) return ERR;
+  int nbits;
+  for (nbits = 0; offset < results->rawlen; nbits++) {
+    int levelA, levelB; // Next two levels
+    levelA = getRClevel(results, &offset, &used, RC6_T1); 
+    if (nbits == 3) {
+      // T bit is double wide; make sure second half matches
+      if (levelA != getRClevel(results, &offset, &used, RC6_T1)) return ERR;
+    } 
+    levelB = getRClevel(results, &offset, &used, RC6_T1);
+    if (nbits == 3) {
+      // T bit is double wide; make sure second half matches
+      if (levelB != getRClevel(results, &offset, &used, RC6_T1)) return ERR;
+    } 
+    if (levelA == MARK && levelB == SPACE) { // reversed compared to RC5
+      // 1 bit
+      data = (data << 1) | 1;
+    } 
+    else if (levelA == SPACE && levelB == MARK) {
+      // zero bit
+      data <<= 1;
+    } 
+    else {
+      return ERR; // Error
+    } 
+  }
+  // Success
+  results->bits = nbits;
+  results->value = data;
+  results->decode_type = RC6;
+  return DECODED;
+}
+
+/* -----------------------------------------------------------------------
+ * hashdecode - decode an arbitrary IR code.
+ * Instead of decoding using a standard encoding scheme
+ * (e.g. Sony, NEC, RC5), the code is hashed to a 32-bit value.
+ *
+ * The algorithm: look at the sequence of MARK signals, and see if each one
+ * is shorter (0), the same length (1), or longer (2) than the previous.
+ * Do the same with the SPACE signals.  Hszh the resulting sequence of 0's,
+ * 1's, and 2's to a 32-bit value.  This will give a unique value for each
+ * different code (probably), for most code systems.
+ *
+ * http://arcfn.com/2010/01/using-arbitrary-remotes-with-arduino.html
+ */
+
+// Compare two tick values, returning 0 if newval is shorter,
+// 1 if newval is equal, and 2 if newval is longer
+// Use a tolerance of 20%
+int IRrecv::compare(unsigned int oldval, unsigned int newval) {
+  if (newval < oldval * .8) {
+    return 0;
+  } 
+  else if (oldval < newval * .8) {
+    return 2;
+  } 
+  else {
+    return 1;
+  }
+}
+
+// Use FNV hash algorithm: http://isthe.com/chongo/tech/comp/fnv/#FNV-param
+#define FNV_PRIME_32 16777619
+#define FNV_BASIS_32 2166136261U
+
+/* Converts the raw code values into a 32-bit hash code.
+ * Hopefully this code is unique for each button.
+ * This isn't a "real" decoding, just an arbitrary value.
+ */
+long IRrecv::decodeHash(decode_results *results) {
+  // Require at least 6 samples to prevent triggering on noise
+  if (results->rawlen < 6) {
+    return ERR;
+  }
+  long hash = FNV_BASIS_32;
+  for (int i = 1; i+2 < results->rawlen; i++) {
+    int value =  compare(results->rawbuf[i], results->rawbuf[i+2]);
+    // Add value into the hash
+    hash = (hash * FNV_PRIME_32) ^ value;
+  }
+  results->value = hash;
+  results->bits = 32;
+  results->decode_type = UNKNOWN;
+  return DECODED;
+}
+
+/* Sharp and DISH support by Todd Treece ( http://unionbridge.org/design/ircommand )
+
+The Dish send function needs to be repeated 4 times, and the Sharp function
+has the necessary repeat built in because of the need to invert the signal.
+
+Sharp protocol documentation:
+http://www.sbprojects.com/knowledge/ir/sharp.htm
+
+Here are the LIRC files that I found that seem to match the remote codes
+from the oscilloscope:
+
+Sharp LCD TV:
+http://lirc.sourceforge.net/remotes/sharp/GA538WJSA
+
+DISH NETWORK (echostar 301):
+http://lirc.sourceforge.net/remotes/echostar/301_501_3100_5100_58xx_59xx
+
+For the DISH codes, only send the last for characters of the hex.
+i.e. use 0x1C10 instead of 0x0000000000001C10 which is listed in the
+linked LIRC file.
+*/
+
+void IRsend::sendSharp(unsigned long data, int nbits) {
+  unsigned long invertdata = data ^ SHARP_TOGGLE_MASK;
+  enableIROut(38);
+  for (int i = 0; i < nbits; i++) {
+    if (data & 0x4000) {
+      mark(SHARP_BIT_MARK);
+      space(SHARP_ONE_SPACE);
+    }
+    else {
+      mark(SHARP_BIT_MARK);
+      space(SHARP_ZERO_SPACE);
+    }
+    data <<= 1;
+  }
+  
+  mark(SHARP_BIT_MARK);
+  space(SHARP_ZERO_SPACE);
+  delay(46);
+  for (int i = 0; i < nbits; i++) {
+    if (invertdata & 0x4000) {
+      mark(SHARP_BIT_MARK);
+      space(SHARP_ONE_SPACE);
+    }
+    else {
+      mark(SHARP_BIT_MARK);
+      space(SHARP_ZERO_SPACE);
+    }
+    invertdata <<= 1;
+  }
+  mark(SHARP_BIT_MARK);
+  space(SHARP_ZERO_SPACE);
+  delay(46);
+}
+
+void IRsend::sendDISH(unsigned long data, int nbits)
+{
+  enableIROut(56);
+  mark(DISH_HDR_MARK);
+  space(DISH_HDR_SPACE);
+  for (int i = 0; i < nbits; i++) {
+    if (data & DISH_TOP_BIT) {
+      mark(DISH_BIT_MARK);
+      space(DISH_ONE_SPACE);
+    }
+    else {
+      mark(DISH_BIT_MARK);
+      space(DISH_ZERO_SPACE);
+    }
+    data <<= 1;
+  }
+}
+