Tag the LUFA 120730 release.LUFA-120730

git-svn-id: http://lufa-lib.googlecode.com/svn/tags/LUFA-120730@2428 d5102386-fcda-11dd-9fdb-3debd5008f28

4 files changed, 29 insertions, 32 deletions

diff --git a/Bootloaders/HID/BootloaderHID.c b/Bootloaders/HID/BootloaderHID.c
index acc351a3..c32dddc1 100644
--- a/Bootloaders/HID/BootloaderHID.c
+++ b/Bootloaders/HID/BootloaderHID.c
@@ -46,7 +46,7 @@ static bool RunBootloader = true;
  *  low when the application attempts to start via a watchdog reset, the bootloader will re-start. If set to the value
  *  \ref MAGIC_BOOT_KEY the special init function \ref Application_Jump_Check() will force the application to start.
  */
-uint32_t MagicBootKey ATTR_NO_INIT;
+uint16_t MagicBootKey ATTR_NO_INIT;
 
 
 /** Special startup routine to check if the bootloader was started via a watchdog reset, and if the magic application
diff --git a/Bootloaders/HID/BootloaderHID.h b/Bootloaders/HID/BootloaderHID.h
index af2812a7..e83aad33 100644
--- a/Bootloaders/HID/BootloaderHID.h
+++ b/Bootloaders/HID/BootloaderHID.h
@@ -30,11 +30,11 @@
 
 /** \file
  *
- *  Header file for TeensyHID.c.
+ *  Header file for BootloaderHID.c.
  */
 
-#ifndef _TEENSYHID_H_
-#define _TEENSYHID_H_
+#ifndef _BOOTLOADERHID_H_
+#define _BOOTLOADERHID_H_
 
 	/* Includes: */
 		#include <avr/io.h>
@@ -53,7 +53,7 @@
 		#define COMMAND_STARTAPPLICATION   0xFFFF
 
 		/** Magic bootloader key to unlock forced application start mode. */
-		#define MAGIC_BOOT_KEY            0xDC42CACA
+		#define MAGIC_BOOT_KEY             0xDC42
 		
 	/* Function Prototypes: */
 		static void SetupHardware(void);
diff --git a/Bootloaders/HID/Doxygen.conf b/Bootloaders/HID/Doxygen.conf
index 5fe5a69b..0a84010c 100644
--- a/Bootloaders/HID/Doxygen.conf
+++ b/Bootloaders/HID/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.1
+# Doxyfile 1.8.1.2
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -588,7 +588,7 @@ FILE_VERSION_FILTER    =
 
 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
 # by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. The create the layout file
+# output files in an output format independent way. To create the layout file
 # that represents doxygen's defaults, run doxygen with the -l option.
 # You can optionally specify a file name after the option, if omitted
 # DoxygenLayout.xml will be used as the name of the layout file.
@@ -805,7 +805,7 @@ INLINE_SOURCES         = NO
 
 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
 # doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
+# fragments. Normal C, C++ and Fortran comments will always remain visible.
 
 STRIP_CODE_COMMENTS    = YES
 
@@ -957,9 +957,7 @@ HTML_TIMESTAMP         = NO
 
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
-# page has loaded. For this to work a browser that supports
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+# page has loaded.
 
 HTML_DYNAMIC_SECTIONS  = YES
 
diff --git a/Bootloaders/HID/makefile b/Bootloaders/HID/makefile
index 9e33f7bf..b6477f96 100644
--- a/Bootloaders/HID/makefile
+++ b/Bootloaders/HID/makefile
@@ -9,20 +9,6 @@
 #         LUFA Project Makefile.
 # --------------------------------------
 
-# Starting byte address of the bootloader, as a byte address - computed via the formula
-#   BOOT_START = ((FLASH_SIZE_KB - BOOT_SECTION_SIZE_KB) * 1024)
-#
-# Note that the bootloader size and start address given in AVRStudio is in words and not
-# bytes, and so will need to be doubled to obtain the byte address needed by AVR-GCC.
-FLASH_SIZE_KB        = 128
-BOOT_SECTION_SIZE_KB = 8
-
-# Formulas used to calculate the starting address of the Bootloader section, and the User Application
-# API jump table (for more information on the latter, see the bootloader documentation). These formulas
-# should not need to be altered - modify the FLASH_SIZE_KB and BOOT_SECTION_KB values above instead.
-BOOT_START           = 0x$(shell echo "obase=16; ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024" | bc)
-BOOT_API_TABLESTART  = 0x$(shell echo "obase=16; (($(FLASH_SIZE_KB) * 1024) - 96)" | bc)
-
 MCU          = at90usb1287
 ARCH         = AVR8
 BOARD        = USBKEY
@@ -31,16 +17,29 @@ F_USB        = $(F_CPU)
 OPTIMIZATION = s
 TARGET       = BootloaderHID
 SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB)
-LUFA_PATH    = ../../LUFA/
+LUFA_PATH    = ../../LUFA
 CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     = -Wl,--section-start=.text=$(BOOT_START)
+LD_FLAGS     = -Wl,--section-start=.text=$(BOOT_START_OFFSET)
+
+# Flash size and bootloader section sizes of the target, in KB. These must
+# match the target's total FLASH size and the bootloader size set in the
+# device's fuses.
+FLASH_SIZE_KB        := 128
+BOOT_SECTION_SIZE_KB := 8
+
+# Bootloader address calculation formulas (requires the "bc" unix utility)
+# Do not modify these macros, but rather modify the depedant values above.
+BOOT_START_OFFSET     = 0x$(shell echo "obase=16; ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024" | bc)
+BOOT_SEC_OFFSET       = 0x$(shell echo "obase=16; (($(FLASH_SIZE_KB) * 1024) - $(strip $(1)))" | bc)
 
 # Default target
 all:
 
 # Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa.core.in
-include $(LUFA_PATH)/Build/lufa.sources.in
-include $(LUFA_PATH)/Build/lufa.build.in
-include $(LUFA_PATH)/Build/lufa.doxygen.in
-include $(LUFA_PATH)/Build/lufa.avrdude.in
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk