Removed invalid dfu and flip related targets from the bootloaders - bootloaders can only be replaced with an external programmer.

git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1206 d5102386-fcda-11dd-9fdb-3debd5008f28

4 files changed, 8 insertions, 140 deletions

diff --git a/Bootloaders/CDC/makefile b/Bootloaders/CDC/makefile
index 8a513428..f1634594 100644
--- a/Bootloaders/CDC/makefile
+++ b/Bootloaders/CDC/makefile
@@ -32,18 +32,6 @@
 # make program = Download the hex file to the device, using avrdude.

 #                Please customize the avrdude settings below first!

 #

-# make dfu = Download the hex file to the device, using dfu-programmer (must

-#            have dfu-programmer installed).

-#

-# make flip = Download the hex file to the device, using Atmel FLIP (must

-#             have Atmel FLIP installed).

-#

-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer

-#               (must have dfu-programmer installed).

-#

-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP

-#                (must have Atmel FLIP installed).

-#

 # make doxygen = Generate DoxyGen documentation for the project (must have

 #                DoxyGen installed)

 #

@@ -544,27 +532,6 @@ gccversion :
 program: $(TARGET).hex $(TARGET).eep

 	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)

 

-flip: $(TARGET).hex

-	batchisp -hardware usb -device $(MCU) -operation erase f

-	batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program

-	batchisp -hardware usb -device $(MCU) -operation start reset 0

-

-dfu: $(TARGET).hex

-	dfu-programmer $(MCU) erase

-	dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex

-	dfu-programmer $(MCU) reset

-

-flip-ee: $(TARGET).hex $(TARGET).eep

-	$(COPY) $(TARGET).eep $(TARGET)eep.hex

-	batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase

-	batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program

-	batchisp -hardware usb -device $(MCU) -operation start reset 0

-	$(REMOVE) $(TARGET)eep.hex

-

-dfu-ee: $(TARGET).hex $(TARGET).eep

-	dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep

-	dfu-programmer $(MCU) reset

-

 

 # Generate avr-gdb config/init file which does the following:

 #     define the reset signal, load the target file, connect to target, and set 

@@ -742,5 +709,5 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
 .PHONY : all checkinvalidevents showliboptions    \

 showtarget begin finish end sizebefore sizeafter  \

 gccversion build elf hex eep lss sym coff extcoff \

-program dfu flip flip-ee dfu-ee clean debug       \

-clean_list clean_binary gdb-config doxygen
\ No newline at end of file
+program clean debug clean_list clean_binary       \

+gdb-config doxygen
\ No newline at end of file
diff --git a/Bootloaders/DFU/makefile b/Bootloaders/DFU/makefile
index 2cccd1d8..b7fac1b3 100644
--- a/Bootloaders/DFU/makefile
+++ b/Bootloaders/DFU/makefile
@@ -32,18 +32,6 @@
 # make program = Download the hex file to the device, using avrdude.

 #                Please customize the avrdude settings below first!

 #

-# make dfu = Download the hex file to the device, using dfu-programmer (must

-#            have dfu-programmer installed).

-#

-# make flip = Download the hex file to the device, using Atmel FLIP (must

-#             have Atmel FLIP installed).

-#

-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer

-#               (must have dfu-programmer installed).

-#

-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP

-#                (must have Atmel FLIP installed).

-#

 # make doxygen = Generate DoxyGen documentation for the project (must have

 #                DoxyGen installed)

 #

@@ -546,27 +534,6 @@ gccversion :
 program: $(TARGET).hex $(TARGET).eep

 	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)

 

-flip: $(TARGET).hex

-	batchisp -hardware usb -device $(MCU) -operation erase f

-	batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program

-	batchisp -hardware usb -device $(MCU) -operation start reset 0

-

-dfu: $(TARGET).hex

-	dfu-programmer $(MCU) erase

-	dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex

-	dfu-programmer $(MCU) reset

-

-flip-ee: $(TARGET).hex $(TARGET).eep

-	$(COPY) $(TARGET).eep $(TARGET)eep.hex

-	batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase

-	batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program

-	batchisp -hardware usb -device $(MCU) -operation start reset 0

-	$(REMOVE) $(TARGET)eep.hex

-

-dfu-ee: $(TARGET).hex $(TARGET).eep

-	dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep

-	dfu-programmer $(MCU) reset

-

 

 # Generate avr-gdb config/init file which does the following:

 #     define the reset signal, load the target file, connect to target, and set 

@@ -744,5 +711,5 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
 .PHONY : all checkinvalidevents showliboptions    \

 showtarget begin finish end sizebefore sizeafter  \

 gccversion build elf hex eep lss sym coff extcoff \

-program dfu flip flip-ee dfu-ee clean debug       \

-clean_list clean_binary gdb-config doxygen
\ No newline at end of file
+program clean debug clean_list clean_binary       \

+gdb-config doxygen
\ No newline at end of file
diff --git a/Bootloaders/Incomplete/MIDI/makefile b/Bootloaders/Incomplete/MIDI/makefile
index 4a29d0b8..faaa47b2 100644
--- a/Bootloaders/Incomplete/MIDI/makefile
+++ b/Bootloaders/Incomplete/MIDI/makefile
@@ -32,18 +32,6 @@
 # make program = Download the hex file to the device, using avrdude.

 #                Please customize the avrdude settings below first!

 #

-# make dfu = Download the hex file to the device, using dfu-programmer (must

-#            have dfu-programmer installed).

-#

-# make flip = Download the hex file to the device, using Atmel FLIP (must

-#             have Atmel FLIP installed).

-#

-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer

-#               (must have dfu-programmer installed).

-#

-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP

-#                (must have Atmel FLIP installed).

-#

 # make doxygen = Generate DoxyGen documentation for the project (must have

 #                DoxyGen installed)

 #

@@ -535,27 +523,6 @@ gccversion :
 program: $(TARGET).hex $(TARGET).eep

 	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)

 

-flip: $(TARGET).hex

-	batchisp -hardware usb -device $(MCU) -operation erase f

-	batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program

-	batchisp -hardware usb -device $(MCU) -operation start reset 0

-

-dfu: $(TARGET).hex

-	dfu-programmer $(MCU) erase

-	dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex

-	dfu-programmer $(MCU) reset

-

-flip-ee: $(TARGET).hex $(TARGET).eep

-	$(COPY) $(TARGET).eep $(TARGET)eep.hex

-	batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase

-	batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program

-	batchisp -hardware usb -device $(MCU) -operation start reset 0

-	$(REMOVE) $(TARGET)eep.hex

-

-dfu-ee: $(TARGET).hex $(TARGET).eep

-	dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep

-	dfu-programmer $(MCU) reset

-

 

 # Generate avr-gdb config/init file which does the following:

 #     define the reset signal, load the target file, connect to target, and set 

@@ -733,5 +700,5 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
 .PHONY : all checkinvalidevents showliboptions    \

 showtarget begin finish end sizebefore sizeafter  \

 gccversion build elf hex eep lss sym coff extcoff \

-program dfu flip flip-ee dfu-ee clean debug       \

-clean_list clean_binary gdb-config doxygen
\ No newline at end of file
+program clean debug clean_list clean_binary       \

+gdb-config doxygen
\ No newline at end of file
diff --git a/Bootloaders/TeensyHID/makefile b/Bootloaders/TeensyHID/makefile
index 12b16424..0895222a 100644
--- a/Bootloaders/TeensyHID/makefile
+++ b/Bootloaders/TeensyHID/makefile
@@ -32,18 +32,6 @@
 # make program = Download the hex file to the device, using avrdude.

 #                Please customize the avrdude settings below first!

 #

-# make dfu = Download the hex file to the device, using dfu-programmer (must

-#            have dfu-programmer installed).

-#

-# make flip = Download the hex file to the device, using Atmel FLIP (must

-#             have Atmel FLIP installed).

-#

-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer

-#               (must have dfu-programmer installed).

-#

-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP

-#                (must have Atmel FLIP installed).

-#

 # make doxygen = Generate DoxyGen documentation for the project (must have

 #                DoxyGen installed)

 #

@@ -544,27 +532,6 @@ gccversion :
 program: $(TARGET).hex $(TARGET).eep

 	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)

 

-flip: $(TARGET).hex

-	batchisp -hardware usb -device $(MCU) -operation erase f

-	batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program

-	batchisp -hardware usb -device $(MCU) -operation start reset 0

-

-dfu: $(TARGET).hex

-	dfu-programmer $(MCU) erase

-	dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex

-	dfu-programmer $(MCU) reset

-

-flip-ee: $(TARGET).hex $(TARGET).eep

-	$(COPY) $(TARGET).eep $(TARGET)eep.hex

-	batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase

-	batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program

-	batchisp -hardware usb -device $(MCU) -operation start reset 0

-	$(REMOVE) $(TARGET)eep.hex

-

-dfu-ee: $(TARGET).hex $(TARGET).eep

-	dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep

-	dfu-programmer $(MCU) reset

-

 

 # Generate avr-gdb config/init file which does the following:

 #     define the reset signal, load the target file, connect to target, and set 

@@ -742,5 +709,5 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
 .PHONY : all checkinvalidevents showliboptions    \

 showtarget begin finish end sizebefore sizeafter  \

 gccversion build elf hex eep lss sym coff extcoff \

-program dfu flip flip-ee dfu-ee clean debug       \

-clean_list clean_binary gdb-config doxygen
\ No newline at end of file
+program clean debug clean_list clean_binary       \

+gdb-config doxygen
\ No newline at end of file