diff options
| author | Dean <Dean@d5102386-fcda-11dd-9fdb-3debd5008f28> | 2010-09-24 06:45:11 +0000 |
|---|---|---|
| committer | Dean <Dean@d5102386-fcda-11dd-9fdb-3debd5008f28> | 2010-09-24 06:45:11 +0000 |
| commit | 532624e98373db073b497e4f669248c9a4acd51a (patch) | |
| tree | 0f3d77d6edb3549fafa5a6e89aea371be0697251 /Demos/Device | |
| parent | 082f0a868529f7fd5359e6606328b6febbeba836 (diff) | |
Added the --suppress-bootloader-mem option to the makefile dfu target, to ensure that writes to the bootloader section of the AVR's flash memory are ignored (thanks to Axel Rohde).
Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target.
Makefile whitespace fixes.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1495 d5102386-fcda-11dd-9fdb-3debd5008f28
Diffstat (limited to 'Demos/Device')
28 files changed, 84 insertions, 84 deletions
diff --git a/Demos/Device/ClassDriver/AudioInput/makefile b/Demos/Device/ClassDriver/AudioInput/makefile index 86f34e6c..470f8321 100644 --- a/Demos/Device/ClassDriver/AudioInput/makefile +++ b/Demos/Device/ClassDriver/AudioInput/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -523,7 +523,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -534,7 +534,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/ClassDriver/AudioOutput/makefile b/Demos/Device/ClassDriver/AudioOutput/makefile index e1b0dd81..8f2978b8 100644 --- a/Demos/Device/ClassDriver/AudioOutput/makefile +++ b/Demos/Device/ClassDriver/AudioOutput/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -525,7 +525,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -536,7 +536,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/makefile b/Demos/Device/ClassDriver/DualVirtualSerial/makefile index da7c7ca2..e270575e 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/makefile +++ b/Demos/Device/ClassDriver/DualVirtualSerial/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/ClassDriver/GenericHID/makefile b/Demos/Device/ClassDriver/GenericHID/makefile index 81091216..b2a80ea8 100644 --- a/Demos/Device/ClassDriver/GenericHID/makefile +++ b/Demos/Device/ClassDriver/GenericHID/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/ClassDriver/Joystick/makefile b/Demos/Device/ClassDriver/Joystick/makefile index 40ace20d..37431cd8 100644 --- a/Demos/Device/ClassDriver/Joystick/makefile +++ b/Demos/Device/ClassDriver/Joystick/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/ClassDriver/Keyboard/makefile b/Demos/Device/ClassDriver/Keyboard/makefile index b392752c..9fe72e23 100644 --- a/Demos/Device/ClassDriver/Keyboard/makefile +++ b/Demos/Device/ClassDriver/Keyboard/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/ClassDriver/KeyboardMouse/makefile b/Demos/Device/ClassDriver/KeyboardMouse/makefile index b7dbd1f6..115759ed 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/makefile +++ b/Demos/Device/ClassDriver/KeyboardMouse/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/ClassDriver/MIDI/makefile b/Demos/Device/ClassDriver/MIDI/makefile index 038f0446..e6aec7eb 100644 --- a/Demos/Device/ClassDriver/MIDI/makefile +++ b/Demos/Device/ClassDriver/MIDI/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/ClassDriver/MassStorage/makefile b/Demos/Device/ClassDriver/MassStorage/makefile index 390adaec..6ec34ec7 100644 --- a/Demos/Device/ClassDriver/MassStorage/makefile +++ b/Demos/Device/ClassDriver/MassStorage/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -524,7 +524,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -535,7 +535,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile index 154c3e1e..bc1b9ce1 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -524,7 +524,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -535,7 +535,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/ClassDriver/Mouse/makefile b/Demos/Device/ClassDriver/Mouse/makefile index c7cb09a3..306f2e68 100644 --- a/Demos/Device/ClassDriver/Mouse/makefile +++ b/Demos/Device/ClassDriver/Mouse/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/ClassDriver/RNDISEthernet/makefile b/Demos/Device/ClassDriver/RNDISEthernet/makefile index 59226883..758a77f8 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/makefile +++ b/Demos/Device/ClassDriver/RNDISEthernet/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -540,7 +540,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -551,7 +551,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/ClassDriver/VirtualSerial/makefile b/Demos/Device/ClassDriver/VirtualSerial/makefile index 52a8cce5..d40208c3 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/makefile +++ b/Demos/Device/ClassDriver/VirtualSerial/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile index 240628d3..7e2bd6d4 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/Incomplete/Sideshow/makefile b/Demos/Device/Incomplete/Sideshow/makefile index f62ffc7f..288188a8 100644 --- a/Demos/Device/Incomplete/Sideshow/makefile +++ b/Demos/Device/Incomplete/Sideshow/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -527,7 +527,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -538,7 +538,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/Incomplete/TestAndMeasurement/makefile b/Demos/Device/Incomplete/TestAndMeasurement/makefile index c7f41ebd..7b2a5b10 100644 --- a/Demos/Device/Incomplete/TestAndMeasurement/makefile +++ b/Demos/Device/Incomplete/TestAndMeasurement/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/AudioInput/makefile b/Demos/Device/LowLevel/AudioInput/makefile index 86bc0948..3e4273a7 100644 --- a/Demos/Device/LowLevel/AudioInput/makefile +++ b/Demos/Device/LowLevel/AudioInput/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -522,7 +522,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -533,7 +533,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/AudioOutput/makefile b/Demos/Device/LowLevel/AudioOutput/makefile index bf189c30..86bb0b79 100644 --- a/Demos/Device/LowLevel/AudioOutput/makefile +++ b/Demos/Device/LowLevel/AudioOutput/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -524,7 +524,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -535,7 +535,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/DualVirtualSerial/makefile b/Demos/Device/LowLevel/DualVirtualSerial/makefile index fbd5d459..40b5a2c2 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/makefile +++ b/Demos/Device/LowLevel/DualVirtualSerial/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/GenericHID/makefile b/Demos/Device/LowLevel/GenericHID/makefile index 9fa56a55..be6da3c6 100644 --- a/Demos/Device/LowLevel/GenericHID/makefile +++ b/Demos/Device/LowLevel/GenericHID/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/Joystick/makefile b/Demos/Device/LowLevel/Joystick/makefile index 553a89ae..49697f7a 100644 --- a/Demos/Device/LowLevel/Joystick/makefile +++ b/Demos/Device/LowLevel/Joystick/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/Keyboard/makefile b/Demos/Device/LowLevel/Keyboard/makefile index a7fcdbb2..3794c508 100644 --- a/Demos/Device/LowLevel/Keyboard/makefile +++ b/Demos/Device/LowLevel/Keyboard/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/KeyboardMouse/makefile b/Demos/Device/LowLevel/KeyboardMouse/makefile index d5932984..dcd70e04 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/makefile +++ b/Demos/Device/LowLevel/KeyboardMouse/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/MIDI/makefile b/Demos/Device/LowLevel/MIDI/makefile index 784709d4..45a8c06b 100644 --- a/Demos/Device/LowLevel/MIDI/makefile +++ b/Demos/Device/LowLevel/MIDI/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/MassStorage/makefile b/Demos/Device/LowLevel/MassStorage/makefile index 9f740fb3..b55334b9 100644 --- a/Demos/Device/LowLevel/MassStorage/makefile +++ b/Demos/Device/LowLevel/MassStorage/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -523,7 +523,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -534,7 +534,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/Mouse/makefile b/Demos/Device/LowLevel/Mouse/makefile index af82d9aa..99467e76 100644 --- a/Demos/Device/LowLevel/Mouse/makefile +++ b/Demos/Device/LowLevel/Mouse/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/RNDISEthernet/makefile b/Demos/Device/LowLevel/RNDISEthernet/makefile index 0bb88470..ed17d366 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/makefile +++ b/Demos/Device/LowLevel/RNDISEthernet/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -541,7 +541,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -552,7 +552,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/VirtualSerial/makefile b/Demos/Device/LowLevel/VirtualSerial/makefile index dacd22e8..89ad42ca 100644 --- a/Demos/Device/LowLevel/VirtualSerial/makefile +++ b/Demos/Device/LowLevel/VirtualSerial/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset |