New BOARD value option BOARD_NONE (equivelent to not specifying BOARD) which will remove all board hardware drivers which do not adversely affect the code operation (currently only the LEDs driver).

Spell-check code/comments in the Webserver/AVRISP-MKII projects.

git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1110 d5102386-fcda-11dd-9fdb-3debd5008f28

58 files changed, 62 insertions, 62 deletions

diff --git a/Demos/Device/ClassDriver/AudioInput/makefile b/Demos/Device/ClassDriver/AudioInput/makefile
index 5eda91b6..cdb51057 100644
--- a/Demos/Device/ClassDriver/AudioInput/makefile
+++ b/Demos/Device/ClassDriver/AudioInput/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/ClassDriver/AudioOutput/makefile b/Demos/Device/ClassDriver/AudioOutput/makefile
index 4729f1ff..ba2f9130 100644
--- a/Demos/Device/ClassDriver/AudioOutput/makefile
+++ b/Demos/Device/ClassDriver/AudioOutput/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/makefile b/Demos/Device/ClassDriver/DualVirtualSerial/makefile
index d8cf086b..8f147011 100644
--- a/Demos/Device/ClassDriver/DualVirtualSerial/makefile
+++ b/Demos/Device/ClassDriver/DualVirtualSerial/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/ClassDriver/GenericHID/makefile b/Demos/Device/ClassDriver/GenericHID/makefile
index 1160f652..fffca878 100644
--- a/Demos/Device/ClassDriver/GenericHID/makefile
+++ b/Demos/Device/ClassDriver/GenericHID/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/ClassDriver/Joystick/makefile b/Demos/Device/ClassDriver/Joystick/makefile
index 63d739f5..a1357d60 100644
--- a/Demos/Device/ClassDriver/Joystick/makefile
+++ b/Demos/Device/ClassDriver/Joystick/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/ClassDriver/Keyboard/makefile b/Demos/Device/ClassDriver/Keyboard/makefile
index 9a6d396c..5d94c5a9 100644
--- a/Demos/Device/ClassDriver/Keyboard/makefile
+++ b/Demos/Device/ClassDriver/Keyboard/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/ClassDriver/KeyboardMouse/makefile b/Demos/Device/ClassDriver/KeyboardMouse/makefile
index 089ef053..64e425a8 100644
--- a/Demos/Device/ClassDriver/KeyboardMouse/makefile
+++ b/Demos/Device/ClassDriver/KeyboardMouse/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/ClassDriver/MIDI/makefile b/Demos/Device/ClassDriver/MIDI/makefile
index 7965e918..6adefed8 100644
--- a/Demos/Device/ClassDriver/MIDI/makefile
+++ b/Demos/Device/ClassDriver/MIDI/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/ClassDriver/MassStorage/makefile b/Demos/Device/ClassDriver/MassStorage/makefile
index c4eee7b7..9aa1e1a1 100644
--- a/Demos/Device/ClassDriver/MassStorage/makefile
+++ b/Demos/Device/ClassDriver/MassStorage/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile
index 3fc8293e..b44c97f3 100644
--- a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile
+++ b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/ClassDriver/Mouse/makefile b/Demos/Device/ClassDriver/Mouse/makefile
index aa56743e..4d92bb34 100644
--- a/Demos/Device/ClassDriver/Mouse/makefile
+++ b/Demos/Device/ClassDriver/Mouse/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/ClassDriver/RNDISEthernet/makefile b/Demos/Device/ClassDriver/RNDISEthernet/makefile
index 2c28b982..2b38bc22 100644
--- a/Demos/Device/ClassDriver/RNDISEthernet/makefile
+++ b/Demos/Device/ClassDriver/RNDISEthernet/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/ClassDriver/VirtualSerial/makefile b/Demos/Device/ClassDriver/VirtualSerial/makefile
index 024bf928..542f7291 100644
--- a/Demos/Device/ClassDriver/VirtualSerial/makefile
+++ b/Demos/Device/ClassDriver/VirtualSerial/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile
index 990760e8..c2f4e1b6 100644
--- a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile
+++ b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/Incomplete/Sideshow/makefile b/Demos/Device/Incomplete/Sideshow/makefile
index c2ac4ba4..4fc3b844 100644
--- a/Demos/Device/Incomplete/Sideshow/makefile
+++ b/Demos/Device/Incomplete/Sideshow/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/LowLevel/AudioInput/makefile b/Demos/Device/LowLevel/AudioInput/makefile
index 21d6a973..07c9b607 100644
--- a/Demos/Device/LowLevel/AudioInput/makefile
+++ b/Demos/Device/LowLevel/AudioInput/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/LowLevel/AudioOutput/makefile b/Demos/Device/LowLevel/AudioOutput/makefile
index cd91640a..4d0d40e3 100644
--- a/Demos/Device/LowLevel/AudioOutput/makefile
+++ b/Demos/Device/LowLevel/AudioOutput/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/LowLevel/DualVirtualSerial/makefile b/Demos/Device/LowLevel/DualVirtualSerial/makefile
index ef10bb38..af9540ee 100644
--- a/Demos/Device/LowLevel/DualVirtualSerial/makefile
+++ b/Demos/Device/LowLevel/DualVirtualSerial/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/LowLevel/GenericHID/makefile b/Demos/Device/LowLevel/GenericHID/makefile
index 9e934b33..6a94fe49 100644
--- a/Demos/Device/LowLevel/GenericHID/makefile
+++ b/Demos/Device/LowLevel/GenericHID/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/LowLevel/Joystick/makefile b/Demos/Device/LowLevel/Joystick/makefile
index ff6cf801..a5bad9fa 100644
--- a/Demos/Device/LowLevel/Joystick/makefile
+++ b/Demos/Device/LowLevel/Joystick/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/LowLevel/Keyboard/makefile b/Demos/Device/LowLevel/Keyboard/makefile
index 53612cab..b294ed7b 100644
--- a/Demos/Device/LowLevel/Keyboard/makefile
+++ b/Demos/Device/LowLevel/Keyboard/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/LowLevel/KeyboardMouse/makefile b/Demos/Device/LowLevel/KeyboardMouse/makefile
index 5bd4e00b..333e1054 100644
--- a/Demos/Device/LowLevel/KeyboardMouse/makefile
+++ b/Demos/Device/LowLevel/KeyboardMouse/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/LowLevel/MIDI/makefile b/Demos/Device/LowLevel/MIDI/makefile
index 09f64724..2cc4bce4 100644
--- a/Demos/Device/LowLevel/MIDI/makefile
+++ b/Demos/Device/LowLevel/MIDI/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/LowLevel/MassStorage/makefile b/Demos/Device/LowLevel/MassStorage/makefile
index eee62f19..51da5cca 100644
--- a/Demos/Device/LowLevel/MassStorage/makefile
+++ b/Demos/Device/LowLevel/MassStorage/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/LowLevel/Mouse/makefile b/Demos/Device/LowLevel/Mouse/makefile
index b5cfcd24..7cbc631b 100644
--- a/Demos/Device/LowLevel/Mouse/makefile
+++ b/Demos/Device/LowLevel/Mouse/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/LowLevel/RNDISEthernet/makefile b/Demos/Device/LowLevel/RNDISEthernet/makefile
index 74909f43..3903a9c8 100644
--- a/Demos/Device/LowLevel/RNDISEthernet/makefile
+++ b/Demos/Device/LowLevel/RNDISEthernet/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Device/LowLevel/VirtualSerial/makefile b/Demos/Device/LowLevel/VirtualSerial/makefile
index 65286513..5adec6cb 100644
--- a/Demos/Device/LowLevel/VirtualSerial/makefile
+++ b/Demos/Device/LowLevel/VirtualSerial/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/makefile b/Demos/DualRole/ClassDriver/MouseHostDevice/makefile
index 29f798ca..fd4a28c7 100644
--- a/Demos/DualRole/ClassDriver/MouseHostDevice/makefile
+++ b/Demos/DualRole/ClassDriver/MouseHostDevice/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/ClassDriver/JoystickHostWithParser/makefile b/Demos/Host/ClassDriver/JoystickHostWithParser/makefile
index d071cc2c..b7c23aae 100644
--- a/Demos/Host/ClassDriver/JoystickHostWithParser/makefile
+++ b/Demos/Host/ClassDriver/JoystickHostWithParser/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/ClassDriver/KeyboardHost/makefile b/Demos/Host/ClassDriver/KeyboardHost/makefile
index 4a682b03..1462b85f 100644
--- a/Demos/Host/ClassDriver/KeyboardHost/makefile
+++ b/Demos/Host/ClassDriver/KeyboardHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile b/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile
index c0b31afc..16e52f55 100644
--- a/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile
+++ b/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/ClassDriver/MIDIHost/MIDIHost.txt b/Demos/Host/ClassDriver/MIDIHost/MIDIHost.txt
index 3489b1f6..afd95c9e 100644
--- a/Demos/Host/ClassDriver/MIDIHost/MIDIHost.txt
+++ b/Demos/Host/ClassDriver/MIDIHost/MIDIHost.txt
@@ -41,7 +41,7 @@
  *

  *  \section SSec_Description Project Description: 

  *

- *  MIDI host demonstration application. This demo will enumerate an attached USB-MIDI device, and print incomming MIDI note

+ *  MIDI host demonstration application. This demo will enumerate an attached USB-MIDI device, and print incoming MIDI note

  *  on and off messages on any channel to the serial port. Pressing the board joystick will send note on and off messages to

  *  the attached MIDI device, with the board HWB controlling the note channel.

  *

diff --git a/Demos/Host/ClassDriver/MIDIHost/makefile b/Demos/Host/ClassDriver/MIDIHost/makefile
index ecfe0231..279312d9 100644
--- a/Demos/Host/ClassDriver/MIDIHost/makefile
+++ b/Demos/Host/ClassDriver/MIDIHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/ClassDriver/MassStorageHost/makefile b/Demos/Host/ClassDriver/MassStorageHost/makefile
index af3f5777..fdbdccfd 100644
--- a/Demos/Host/ClassDriver/MassStorageHost/makefile
+++ b/Demos/Host/ClassDriver/MassStorageHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/ClassDriver/MouseHost/makefile b/Demos/Host/ClassDriver/MouseHost/makefile
index d37d4d53..287691d4 100644
--- a/Demos/Host/ClassDriver/MouseHost/makefile
+++ b/Demos/Host/ClassDriver/MouseHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/ClassDriver/MouseHostWithParser/makefile b/Demos/Host/ClassDriver/MouseHostWithParser/makefile
index a579a2a7..39a96c3d 100644
--- a/Demos/Host/ClassDriver/MouseHostWithParser/makefile
+++ b/Demos/Host/ClassDriver/MouseHostWithParser/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/ClassDriver/PrinterHost/makefile b/Demos/Host/ClassDriver/PrinterHost/makefile
index f0cacffa..1df15442 100644
--- a/Demos/Host/ClassDriver/PrinterHost/makefile
+++ b/Demos/Host/ClassDriver/PrinterHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.c b/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.c
index 148fdf2f..5b2bfe13 100644
--- a/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.c
+++ b/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.c
@@ -36,7 +36,7 @@
  

 #include "RNDISEthernetHost.h"

 

-/** Buffer to hold incomming and outgoing Ethernet packets. */

+/** Buffer to hold incoming and outgoing Ethernet packets. */

 uint8_t PacketBuffer[1024];

 

 /** LUFA RNDIS Class driver interface configuration and state information. This structure is

@@ -146,7 +146,7 @@ int main(void)
 				USB_HostState = HOST_STATE_Configured;

 				break;

 			case HOST_STATE_Configured:

-				PrintIncommingPackets();

+				PrintIncomingPackets();

 			

 				break;

 		}

@@ -156,8 +156,8 @@ int main(void)
 	}

 }

 

-/** Prints incomming packets from the attached RNDIS device to the serial port. */

-void PrintIncommingPackets(void)

+/** Prints incoming packets from the attached RNDIS device to the serial port. */

+void PrintIncomingPackets(void)

 {

 	if (RNDIS_Host_IsPacketReceived(&Ethernet_RNDIS_Interface))

 	{

diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.h b/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.h
index b1eac9e4..06b9fd52 100644
--- a/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.h
+++ b/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.h
@@ -68,7 +68,7 @@
 

 	/* Function Prototypes: */

 		void SetupHardware(void);

-		void PrintIncommingPackets(void);

+		void PrintIncomingPackets(void);

 	

 		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);

 		void EVENT_USB_Host_DeviceAttached(void);

diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/makefile b/Demos/Host/ClassDriver/RNDISEthernetHost/makefile
index c8546846..59672d7a 100644
--- a/Demos/Host/ClassDriver/RNDISEthernetHost/makefile
+++ b/Demos/Host/ClassDriver/RNDISEthernetHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/ClassDriver/StillImageHost/makefile b/Demos/Host/ClassDriver/StillImageHost/makefile
index 3a00809a..70e2ccf8 100644
--- a/Demos/Host/ClassDriver/StillImageHost/makefile
+++ b/Demos/Host/ClassDriver/StillImageHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/ClassDriver/VirtualSerialHost/makefile b/Demos/Host/ClassDriver/VirtualSerialHost/makefile
index 2942a6de..0a5d647a 100644
--- a/Demos/Host/ClassDriver/VirtualSerialHost/makefile
+++ b/Demos/Host/ClassDriver/VirtualSerialHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/Incomplete/BluetoothHost/makefile b/Demos/Host/Incomplete/BluetoothHost/makefile
index d0d7192f..63c7f527 100644
--- a/Demos/Host/Incomplete/BluetoothHost/makefile
+++ b/Demos/Host/Incomplete/BluetoothHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/LowLevel/GenericHIDHost/makefile b/Demos/Host/LowLevel/GenericHIDHost/makefile
index f04310d2..b0015576 100644
--- a/Demos/Host/LowLevel/GenericHIDHost/makefile
+++ b/Demos/Host/LowLevel/GenericHIDHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/makefile b/Demos/Host/LowLevel/JoystickHostWithParser/makefile
index ad476d40..5b09bf98 100644
--- a/Demos/Host/LowLevel/JoystickHostWithParser/makefile
+++ b/Demos/Host/LowLevel/JoystickHostWithParser/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/LowLevel/KeyboardHost/makefile b/Demos/Host/LowLevel/KeyboardHost/makefile
index 04142094..eb889ff9 100644
--- a/Demos/Host/LowLevel/KeyboardHost/makefile
+++ b/Demos/Host/LowLevel/KeyboardHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/makefile b/Demos/Host/LowLevel/KeyboardHostWithParser/makefile
index bad75cc3..e1202ed8 100644
--- a/Demos/Host/LowLevel/KeyboardHostWithParser/makefile
+++ b/Demos/Host/LowLevel/KeyboardHostWithParser/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/LowLevel/MIDIHost/MIDIHost.txt b/Demos/Host/LowLevel/MIDIHost/MIDIHost.txt
index 3489b1f6..afd95c9e 100644
--- a/Demos/Host/LowLevel/MIDIHost/MIDIHost.txt
+++ b/Demos/Host/LowLevel/MIDIHost/MIDIHost.txt
@@ -41,7 +41,7 @@
  *

  *  \section SSec_Description Project Description: 

  *

- *  MIDI host demonstration application. This demo will enumerate an attached USB-MIDI device, and print incomming MIDI note

+ *  MIDI host demonstration application. This demo will enumerate an attached USB-MIDI device, and print incoming MIDI note

  *  on and off messages on any channel to the serial port. Pressing the board joystick will send note on and off messages to

  *  the attached MIDI device, with the board HWB controlling the note channel.

  *

diff --git a/Demos/Host/LowLevel/MIDIHost/makefile b/Demos/Host/LowLevel/MIDIHost/makefile
index 1050de59..b1ee5860 100644
--- a/Demos/Host/LowLevel/MIDIHost/makefile
+++ b/Demos/Host/LowLevel/MIDIHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/LowLevel/MassStorageHost/makefile b/Demos/Host/LowLevel/MassStorageHost/makefile
index 75676324..0caa7492 100644
--- a/Demos/Host/LowLevel/MassStorageHost/makefile
+++ b/Demos/Host/LowLevel/MassStorageHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/LowLevel/MouseHost/makefile b/Demos/Host/LowLevel/MouseHost/makefile
index 31d1a85e..4c9407b0 100644
--- a/Demos/Host/LowLevel/MouseHost/makefile
+++ b/Demos/Host/LowLevel/MouseHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/LowLevel/MouseHostWithParser/makefile b/Demos/Host/LowLevel/MouseHostWithParser/makefile
index d42f45e5..74a1d15c 100644
--- a/Demos/Host/LowLevel/MouseHostWithParser/makefile
+++ b/Demos/Host/LowLevel/MouseHostWithParser/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/LowLevel/PrinterHost/makefile b/Demos/Host/LowLevel/PrinterHost/makefile
index 54108ade..32ab7621 100644
--- a/Demos/Host/LowLevel/PrinterHost/makefile
+++ b/Demos/Host/LowLevel/PrinterHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.c b/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.c
index 3029da83..5ca59157 100644
--- a/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.c
+++ b/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.c
@@ -121,7 +121,7 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8
 	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);

 }

 

-void PrintIncommingPackets(void)

+void PrintIncomingPackets(void)

 {

 	uint8_t ErrorCode;

 

@@ -263,7 +263,7 @@ void RNDIS_Host_Task(void)
 			USB_HostState = HOST_STATE_Configured;

 			break;

 		case HOST_STATE_Configured:

-			PrintIncommingPackets();

+			PrintIncomingPackets();

 		

 			break;

 	}

diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.h b/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.h
index 0110a2fb..20a48ac1 100644
--- a/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.h
+++ b/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.h
@@ -84,7 +84,7 @@
 

 	/* Function Prototypes: */

 		void SetupHardware(void);

-		void PrintIncommingPackets(void);

+		void PrintIncomingPackets(void);

 		void RNDIS_Host_Task(void);

 	

 		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);

diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/makefile b/Demos/Host/LowLevel/RNDISEthernetHost/makefile
index 32389b6f..8bd97e09 100644
--- a/Demos/Host/LowLevel/RNDISEthernetHost/makefile
+++ b/Demos/Host/LowLevel/RNDISEthernetHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/LowLevel/StillImageHost/makefile b/Demos/Host/LowLevel/StillImageHost/makefile
index 73cc35d7..e830c7ae 100644
--- a/Demos/Host/LowLevel/StillImageHost/makefile
+++ b/Demos/Host/LowLevel/StillImageHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Demos/Host/LowLevel/VirtualSerialHost/makefile b/Demos/Host/LowLevel/VirtualSerialHost/makefile
index 168b1b47..dc960459 100644
--- a/Demos/Host/LowLevel/VirtualSerialHost/makefile
+++ b/Demos/Host/LowLevel/VirtualSerialHost/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY