Upgrade Doxygen configuration files for Doxygen 1.8.1, fix broken stylesheet and footer HTML, add explicit spacing into documentation code fragments to prevent Doxygen from removing empty lines in the output.

git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@2224 d5102386-fcda-11dd-9fdb-3debd5008f28

5 files changed, 23 insertions, 23 deletions

diff --git a/LUFA/Drivers/Board/Buttons.h b/LUFA/Drivers/Board/Buttons.h
index c3d6c0d0..1b70a6bd 100644
--- a/LUFA/Drivers/Board/Buttons.h
+++ b/LUFA/Drivers/Board/Buttons.h
@@ -68,13 +68,13 @@
  *  \code
  *      // Initialize the button driver before first use
  *      Buttons_Init();
- *
+ *      
  *      printf("Waiting for button press...\r\n");
- *
+ *      
  *      // Loop until a board button has been pressed
  *      uint8_t ButtonPress;
  *      while (!(ButtonPress = Buttons_GetStatus())) {};
- *
+ *      
  *      // Display which button was pressed (assuming two board buttons)
  *      printf("Button pressed: %s\r\n", (ButtonPress == BUTTONS_BUTTON1) ? "Button 1" : "Button 2");
  *  \endcode
diff --git a/LUFA/Drivers/Board/Dataflash.h b/LUFA/Drivers/Board/Dataflash.h
index a5ae29dc..c9f66054 100644
--- a/LUFA/Drivers/Board/Dataflash.h
+++ b/LUFA/Drivers/Board/Dataflash.h
@@ -70,44 +70,44 @@
  *      SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING |
  *               SPI_SAMPLE_TRAILING | SPI_MODE_MASTER);
  *      Dataflash_Init();
- *
+ *      
  *      uint8_t WriteBuffer[DATAFLASH_PAGE_SIZE];
  *      uint8_t ReadBuffer[DATAFLASH_PAGE_SIZE];
- *
+ *      
  *      // Fill page write buffer with a repeating pattern
  *      for (uint16_t i = 0; i < DATAFLASH_PAGE_SIZE; i++)
  *        WriteBuffer[i] = (i & 0xFF);
- *
+ *      
  *      // Must select the chip of interest first before operating on it
  *      Dataflash_SelectChip(DATAFLASH_CHIP1);
- *
+ *      
  *      // Write to the Dataflash's first internal memory buffer
  *      printf("Writing data to first dataflash buffer:\r\n");
  *      Dataflash_SendByte(DF_CMD_BUFF1WRITE);
  *      Dataflash_SendAddressBytes(0, 0);
- *
+ *      
  *      for (uint16_t i = 0; i < DATAFLASH_PAGE_SIZE; i++)
  *        Dataflash_SendByte(WriteBuffer[i]);
- *
+ *      
  *      // Commit the Dataflash's first memory buffer to the non-volatile FLASH memory
  *      printf("Committing page to non-volatile memory page index 5:\r\n");
  *      Dataflash_SendByte(DF_CMD_BUFF1TOMAINMEMWITHERASE);
  *      Dataflash_SendAddressBytes(5, 0);
  *      Dataflash_WaitWhileBusy();
- *
+ *      
  *      // Read the page from non-volatile FLASH memory into the Dataflash's second memory buffer
  *      printf("Reading data into second dataflash buffer:\r\n");
  *      Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF2);
  *      Dataflash_SendAddressBytes(5, 0);
  *      Dataflash_WaitWhileBusy();
- *
+ *      
  *      // Read the Dataflash's second internal memory buffer
  *      Dataflash_SendByte(DF_CMD_BUFF2READ);
  *      Dataflash_SendAddressBytes(0, 0);
- *
+ *      
  *      for (uint16_t i = 0; i < DATAFLASH_PAGE_SIZE; i++)
  *        ReadBuffer[i] = Dataflash_ReceiveByte();
- *
+ *      
  *      // Deselect the chip after use
  *      Dataflash_DeselectChip();
  *  \endcode
diff --git a/LUFA/Drivers/Board/Joystick.h b/LUFA/Drivers/Board/Joystick.h
index 0a1f9fa7..63d28e83 100644
--- a/LUFA/Drivers/Board/Joystick.h
+++ b/LUFA/Drivers/Board/Joystick.h
@@ -67,22 +67,22 @@
  *  \code
  *      // Initialize the board Joystick driver before first use
  *      Joystick_Init();
- *
+ *      
  *      printf("Waiting for joystick movement...\r\n");
- *
+ *      
  *      // Loop until a the joystick has been moved
  *      uint8_t JoystickMovement;
  *      while (!(JoystickMovement = Joystick_GetStatus())) {};
- *
+ *      
  *      // Display which direction the joystick was moved in
  *      printf("Joystick moved:\r\n");
- *
+ *      
  *      if (JoystickMovement & (JOY_UP | JOY_DOWN))
  *        printf("%s ", (JoystickMovement & JOY_UP) ? "Up" : "Down");
- *
+ *      
  *      if (JoystickMovement & (JOY_LEFT | JOY_RIGHT))
  *        printf("%s ", (JoystickMovement & JOY_LEFT) ? "Left" : "Right");
- *
+ *      
  *      if (JoystickMovement & JOY_PRESS)
  *        printf("Pressed");
  *  \endcode
diff --git a/LUFA/Drivers/Board/LEDs.h b/LUFA/Drivers/Board/LEDs.h
index f6f9d82f..97cb81a5 100644
--- a/LUFA/Drivers/Board/LEDs.h
+++ b/LUFA/Drivers/Board/LEDs.h
@@ -76,7 +76,7 @@
  *  \code
  *      // Initialize the board LED driver before first use
  *      LEDs_Init();
- *
+ *      
  *      // Turn on each of the four LEDs in turn
  *      LEDs_SetAllLEDs(LEDS_LED1);
  *      Delay_MS(500);
@@ -86,11 +86,11 @@
  *      Delay_MS(500);
  *      LEDs_SetAllLEDs(LEDS_LED4);
  *      Delay_MS(500);
- *
+ *      
  *      // Turn on all LEDs
  *      LEDs_SetAllLEDs(LEDS_ALL_LEDS);
  *      Delay_MS(1000);
- *
+ *      
  *      // Turn on LED 1, turn off LED 2, leaving LEDs 3 and 4 in their current state
  *      LEDs_ChangeLEDs((LEDS_LED1 | LEDS_LED2), LEDS_LED1);
  *  \endcode
diff --git a/LUFA/Drivers/Board/Temperature.h b/LUFA/Drivers/Board/Temperature.h
index ef967967..54ca957a 100644
--- a/LUFA/Drivers/Board/Temperature.h
+++ b/LUFA/Drivers/Board/Temperature.h
@@ -56,7 +56,7 @@
  *      // Initialize the ADC and board temperature sensor drivers before first use
  *      ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_128);
  *      Temperature_Init();
- *
+ *      
  *      // Display converted temperature in degrees Celsius
  *      printf("Current Temperature: %d Degrees\r\n", Temperature_GetTemperature());
  *  \endcode