Upgrade Doxygen configuration files for Doxygen 1.8.1, fix broken stylesheet and footer HTML, add explicit spacing into documentation code fragments to prevent Doxygen from removing empty lines in the output.

git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@2224 d5102386-fcda-11dd-9fdb-3debd5008f28

5 files changed, 22 insertions, 22 deletions

diff --git a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
index ec80dd24..c04d2ba8 100644
--- a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
@@ -55,14 +55,14 @@
  *  \code
  *      // Initialize the ADC driver before first use
  *      ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);
- *
+ *      
  *      // Must setup the ADC channel to read beforehand
  *      ADC_SetupChannel(1);
- *
+ *      
  *      // Perform a single conversion of the ADC channel 1
  *      ADC_GetChannelReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_CHANNEL1);
  *      printf("Conversion Result: %d\r\n", ADC_GetResult());
- *
+ *      
  *      // Start reading ADC channel 1 in free running (continuous conversion) mode
  *      ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_CHANNEL1);
  *      for (;;)
diff --git a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
index 2e396ed5..3ca03760 100644
--- a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
@@ -56,17 +56,17 @@
  *      // Initialize the SPI driver before first use
  *      SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING |
  *               SPI_SAMPLE_TRAILING | SPI_MODE_MASTER);
- *
+ *      
  *      // Send several bytes, ignoring the returned data
  *      SPI_SendByte(0x01);
  *      SPI_SendByte(0x02);
  *      SPI_SendByte(0x03);
- *
+ *      
  *      // Receive several bytes, sending a dummy 0x00 byte each time
  *      uint8_t Byte1 = SPI_ReceiveByte();
  *      uint8_t Byte2 = SPI_ReceiveByte();
  *      uint8_t Byte3 = SPI_ReceiveByte();
- *
+ *      
  *      // Send a byte, and store the received byte from the same transaction
  *      uint8_t ResponseByte = SPI_TransferByte(0xDC);
  *  \endcode
diff --git a/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h
index 562aaecf..24d341f0 100644
--- a/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h
@@ -53,17 +53,17 @@
  *  \code
  *      // Initialize the Master SPI mode USART driver before first use, with 1Mbit baud
  *      SerialSPI_Init((USART_SPI_SCK_LEAD_RISING | SPI_SAMPLE_LEADING | SPI_ORDER_MSB_FIRST), 1000000);
- *
+ *      
  *      // Send several bytes, ignoring the returned data
  *      SerialSPI_SendByte(0x01);
  *      SerialSPI_SendByte(0x02);
  *      SerialSPI_SendByte(0x03);
- *
+ *      
  *      // Receive several bytes, sending a dummy 0x00 byte each time
  *      uint8_t Byte1 = SerialSPI_ReceiveByte();
  *      uint8_t Byte2 = SerialSPI_ReceiveByte();
  *      uint8_t Byte3 = SerialSPI_ReceiveByte();
- *
+ *      
  *      // Send a byte, and store the received byte from the same transaction
  *      uint8_t ResponseByte = SerialSPI_TransferByte(0xDC);
  *  \endcode
diff --git a/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h
index 687ea74a..b7b50f43 100644
--- a/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h
@@ -53,10 +53,10 @@
  *  \code
  *      // Initialize the serial USART driver before first use, with 9600 baud (and no double-speed mode)
  *      Serial_Init(9600, false);
- *
+ *      
  *      // Send a string through the USART
  *      Serial_TxString("Test String\r\n");
- *
+ *      
  *      // Receive a byte through the USART
  *      uint8_t DataByte = Serial_RxByte();
  *  \endcode
diff --git a/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h
index b9131df3..38ad1f3e 100644
--- a/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h
@@ -54,35 +54,35 @@
  *  \code
  *      // Initialize the TWI driver before first use at 200KHz
  *      TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 200000));
- *
+ *      
  *      // Start a write session to device at device address 0xA0, internal address 0xDC with a 10ms timeout
  *      if (TWI_StartTransmission(0xA0 | TWI_ADDRESS_WRITE, 10) == TWI_ERROR_NoError)
  *      {
  *          TWI_SendByte(0xDC);
- *
+ *          
  *          TWI_SendByte(0x01);
  *          TWI_SendByte(0x02);
  *          TWI_SendByte(0x03);
- *
+ *          
  *          // Must stop transmission afterwards to release the bus
  *          TWI_StopTransmission();
  *      }
- *
+ *      
  *      // Start a read session to device at address 0xA0, internal address 0xDC with a 10ms timeout
  *      if (TWI_StartTransmission(0xA0 | TWI_ADDRESS_WRITE, 10) == TWI_ERROR_NoError)
  *      {
  *          TWI_SendByte(0xDC);
  *          TWI_StopTransmission();
- *
+ *          
  *          if (TWI_StartTransmission(0xA0 | TWI_ADDRESS_READ, 10) == TWI_ERROR_NoError)
  *          {
  *              uint8_t Byte1, Byte2, Byte3;
- *
+ *              
  *              // Read three bytes, acknowledge after the third byte is received
  *              TWI_ReceiveByte(&Byte1, false);
  *              TWI_ReceiveByte(&Byte2, false);
  *              TWI_ReceiveByte(&Byte3, true);
- *
+ *              
  *              // Must stop transmission afterwards to release the bus
  *              TWI_StopTransmission();
  *          }
@@ -93,18 +93,18 @@
  *  \code
  *      // Initialize the TWI driver before first use at 200KHz
  *      TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 200000));
- *
+ *      
  *      // Start a write session to device at device address 0xA0, internal address 0xDC with a 10ms timeout
  *      uint8_t InternalWriteAddress = 0xDC;
  *      uint8_t WritePacket[3] = {0x01, 0x02, 0x03};
- *
+ *      
  *      TWI_WritePacket(0xA0, 10, &InternalWriteAddress, sizeof(InternalWriteAddress),
  *                      &WritePacket, sizeof(WritePacket);
- *
+ *      
  *      // Start a read session to device at address 0xA0, internal address 0xDC with a 10ms timeout
  *      uint8_t InternalReadAddress = 0xDC;
  *      uint8_t ReadPacket[3];
- *
+ *      
  *      TWI_ReadPacket(0xA0, 10, &InternalReadAddress, sizeof(InternalReadAddress),
  *                     &ReadPacket, sizeof(ReadPacket);
  *  \endcode