Change over Doxygen \note documentation to \pre where applicable.

git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1336 d5102386-fcda-11dd-9fdb-3debd5008f28

1 files changed, 20 insertions, 20 deletions

diff --git a/LUFA/Drivers/USB/Class/Host/StillImage.h b/LUFA/Drivers/USB/Class/Host/StillImage.h
index 1feddb88..b737e367 100644
--- a/LUFA/Drivers/USB/Class/Host/StillImage.h
+++ b/LUFA/Drivers/USB/Class/Host/StillImage.h
@@ -146,8 +146,8 @@
 			/** Opens a new PIMA session with the attached device. This should be used before any session-orientated PIMA commands
 			 *  are issued to the device. Only one session can be open at the one time.
 			 *	
-			 *  \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
-			 *        call will fail.
+			 *  \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+			 *       call will fail.
 			 *
 			 *  \param[in,out] SIInterfaceInfo  Pointer to a structure containing a Still Image Class host configuration and state
 			 *
@@ -159,8 +159,8 @@
 			/** Closes an already opened PIMA session with the attached device. This should be used after all session-orientated
 			 *  PIMA commands have been issued to the device.
 			 *
-			 *  \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
-			 *        call will fail.
+			 *  \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+			 *       call will fail.
 			 *
 			 *  \param[in,out] SIInterfaceInfo  Pointer to a structure containing a Still Image Class host configuration and state
 			 *
@@ -172,8 +172,8 @@
 			/** Sends a raw PIMA block header to the device, filling out the transaction ID automatically. This can be used to send
 			 *  arbitrary PIMA blocks to the device with or without parameters.
 			 *
-			 *  \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
-			 *        call will fail.
+			 *  \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+			 *       call will fail.
 			 *
 			 *  \param[in,out] SIInterfaceInfo  Pointer to a structure containing a Still Image Class host configuration and state
 			 *  \param[in]     PIMAHeader       Pointer to a PIMA container structure that is to be sent
@@ -187,8 +187,8 @@
 			/** Receives a raw PIMA block header to the device. This can be used to receive arbitrary PIMA blocks from the device with
 			 *  or without parameters.
 			 *
-			 *  \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
-			 *        call will fail.
+			 *  \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+			 *       call will fail.
 			 *
 			 *  \param[in,out] SIInterfaceInfo  Pointer to a structure containing a Still Image Class host configuration and state
 			 *  \param[out]    PIMAHeader       Pointer to a PIMA container structure where the received block is to be stored
@@ -201,8 +201,8 @@
 
 			/** Sends a given PIMA command to the attached device, filling out the PIMA command header's Transaction ID automatically.
 			 *	
-			 *  \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
-			 *        call will fail.
+			 *  \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+			 *       call will fail.
 			 *
 			 *  \param[in,out] SIInterfaceInfo  Pointer to a structure containing a Still Image Class host configuration and state
 			 *  \param[in]     Operation        PIMA operation code to issue to the device
@@ -218,8 +218,8 @@
 			/** Receives and checks a response block from the attached PIMA device, once a command has been issued and all data
 			 *  associated with the command has been transferred.
 			 *	
-			 *  \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
-			 *        call will fail.
+			 *  \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+			 *       call will fail.
 			 *
 			 *  \param[in,out] SIInterfaceInfo  Pointer to a structure containing a Still Image Class host configuration and state
 			 *
@@ -230,8 +230,8 @@
 
 			/** Indicates if the device has issued a PIMA event block to the host via the asynchronous events pipe.
 			 *
-			 *  \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
-			 *        call will fail.
+			 *  \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+			 *       call will fail.
 			 *
 			 *  \param[in,out] SIInterfaceInfo  Pointer to a structure containing a Still Image Class host configuration and state
 			 *
@@ -241,8 +241,8 @@
 
 			/** Receives an asynchronous event block from the device via the asynchronous events pipe.
 			 *
-			 *  \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
-			 *        call will fail.
+			 *  \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+			 *       call will fail.
 			 *
 			 *  \param[in,out] SIInterfaceInfo  Pointer to a structure containing a Still Image Class host configuration and state
 			 *  \param[out]    PIMAHeader       Pointer to a PIMA container structure where the event should be stored
@@ -257,8 +257,8 @@
 			/** Sends arbitrary data to the attached device, for use in the data phase of PIMA commands which require data
 			 *  transfer beyond the regular PIMA command block parameters.
 			 *
-			 *  \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
-			 *        call will fail.
+			 *  \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+			 *       call will fail.
 			 *
 			 *  \param[in,out] SIInterfaceInfo  Pointer to a structure containing a Still Image Class host configuration and state
 			 *  \param[in]     Buffer           Pointer to a buffer where the data to send has been stored
@@ -272,8 +272,8 @@
 			/** Receives arbitrary data from the attached device, for use in the data phase of PIMA commands which require data
 			 *  transfer beyond the regular PIMA command block parameters.
 			 *
-			 *  \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
-			 *        call will fail.
+			 *  \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+			 *       call will fail.
 			 *
 			 *  \param[in,out] SIInterfaceInfo  Pointer to a structure containing a Still Image Class host configuration and state
 			 *  \param[out]    Buffer           Pointer to a buffer where the received data is to be stored