Tag the LUFA 120730 release.LUFA-120730

git-svn-id: http://lufa-lib.googlecode.com/svn/tags/LUFA-120730@2428 d5102386-fcda-11dd-9fdb-3debd5008f28
author: Dean <Dean@d5102386-fcda-11dd-9fdb-3debd5008f28> 2012-07-30 17:17:40 +0000
committer: Dean <Dean@d5102386-fcda-11dd-9fdb-3debd5008f28> 2012-07-30 17:17:40 +0000
commit: 9b57f660aeb9f8b94893d546d703b95928cb3640 (patch)
tree: bf545cc06c1f18a9eaf5927ab1f42c4059ff83f4 /Projects
parent: a0a30d5afb506b55655de244f1c7f6b1857279d8 (diff)
50 files changed, 460 insertions, 616 deletions
diff --git a/Projects/AVRISP-MKII/AVRISPDescriptors.c b/Projects/AVRISP-MKII/AVRISPDescriptors.c
index f3381e12..9ad7c154 100644
--- a/Projects/AVRISP-MKII/AVRISPDescriptors.c
+++ b/Projects/AVRISP-MKII/AVRISPDescriptors.c
@@ -38,6 +38,7 @@
 #include "AVRISPDescriptors.h"
 
 #if defined(RESET_TOGGLES_LIBUSB_COMPAT) || defined(__DOXYGEN__)
+	/** Indicates if an external reset has occurred and the compatibility mode needs to be altered */
 	static bool AVRISP_NeedCompatibilitySwitch ATTR_NO_INIT;
 
 	/** Current AVRISP data IN endpoint address. */
@@ -207,7 +208,8 @@ uint16_t AVRISP_GetDescriptor(const uint16_t wValue,
 			break;
 		case DTYPE_Configuration:
 			*DescriptorMemorySpace = MEMSPACE_RAM;
-			#if defined(RESET_TOGGLES_LIBUSB_COMPAT)			
+			#if defined(RESET_TOGGLES_LIBUSB_COMPAT)
+				/* Update the configuration descriptor with the current endpoint address */
 				AVRISP_ConfigurationDescriptor.AVRISP_DataInEndpoint.EndpointAddress = AVRISP_CurrDataINEndpointAddress;
 			#endif
 
@@ -253,7 +255,7 @@ uint16_t AVRISP_GetDescriptor(const uint16_t wValue,
  */
 void CheckExternalReset(void)
 {	
-	/* If an external reset occured, we need to change compatibility mode */
+	/* If an external reset occurred, we need to change compatibility mode */
 	AVRISP_NeedCompatibilitySwitch = (MCUSR == (1 << EXTRF));
 
 	MCUSR = 0;
@@ -307,5 +309,7 @@ void UpdateCurrentCompatibilityMode(void)
 			}
 			break;
 	}
+	
+	Delay_MS(500);
 }
 #endif
diff --git a/Projects/AVRISP-MKII/AVRISPDescriptors.h b/Projects/AVRISP-MKII/AVRISPDescriptors.h
index 2779e083..a14515d5 100644
--- a/Projects/AVRISP-MKII/AVRISPDescriptors.h
+++ b/Projects/AVRISP-MKII/AVRISPDescriptors.h
@@ -41,6 +41,8 @@
 
 		#include <LUFA/Drivers/USB/USB.h>
 		#include <LUFA/Drivers/Board/LEDs.h>
+		
+		#include "Config/AppConfig.h"
 
 	/* Preprocessor Checks: */
 		#if defined(LIBUSB_DRIVER_COMPAT) && defined(RESET_TOGGLES_LIBUSB_COMPAT)
diff --git a/Projects/AVRISP-MKII/Doxygen.conf b/Projects/AVRISP-MKII/Doxygen.conf
index 24e139ab..51656db1 100644
--- a/Projects/AVRISP-MKII/Doxygen.conf
+++ b/Projects/AVRISP-MKII/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.1
+# Doxyfile 1.8.1.2
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -588,7 +588,7 @@ FILE_VERSION_FILTER    =
 
 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
 # by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. The create the layout file
+# output files in an output format independent way. To create the layout file
 # that represents doxygen's defaults, run doxygen with the -l option.
 # You can optionally specify a file name after the option, if omitted
 # DoxygenLayout.xml will be used as the name of the layout file.
@@ -804,7 +804,7 @@ INLINE_SOURCES         = NO
 
 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
 # doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
+# fragments. Normal C, C++ and Fortran comments will always remain visible.
 
 STRIP_CODE_COMMENTS    = YES
 
@@ -956,9 +956,7 @@ HTML_TIMESTAMP         = NO
 
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
-# page has loaded. For this to work a browser that supports
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+# page has loaded.
 
 HTML_DYNAMIC_SECTIONS  = YES
 
diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
index b77c1805..6bf74c87 100644
--- a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
+++ b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
@@ -361,7 +361,7 @@ uint8_t ISPTarget_WaitForProgComplete(const uint8_t ProgrammingMode,
 	}
 
 	/* Program complete - reset timeout */
-	wdt_reset();
+	TimeoutTicksRemaining = COMMAND_TIMEOUT_TICKS;
 
 	return ProgrammingStatus;
 }
diff --git a/Projects/AVRISP-MKII/makefile b/Projects/AVRISP-MKII/makefile
index fd829964..ffc00b91 100644
--- a/Projects/AVRISP-MKII/makefile
+++ b/Projects/AVRISP-MKII/makefile
@@ -18,7 +18,7 @@ OPTIMIZATION = s
 TARGET       = AVRISP-MKII
 SRC          = $(TARGET).c AVRISPDescriptors.c Lib/V2Protocol.c Lib/V2ProtocolParams.c Lib/ISP/ISPProtocol.c Lib/ISP/ISPTarget.c Lib/XPROG/XPROGProtocol.c \
                Lib/XPROG/XPROGTarget.c Lib/XPROG/XMEGANVM.c Lib/XPROG/TINYNVM.c $(LUFA_SRC_USB)
-LUFA_PATH    = ../../LUFA/
+LUFA_PATH    = ../../LUFA
 CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
 LD_FLAGS     =
 
@@ -26,9 +26,12 @@ LD_FLAGS     =
 all:
 
 # Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa.core.in
-include $(LUFA_PATH)/Build/lufa.sources.in
-include $(LUFA_PATH)/Build/lufa.build.in
-include $(LUFA_PATH)/Build/lufa.doxygen.in
-include $(LUFA_PATH)/Build/lufa.dfu.in
-include $(LUFA_PATH)/Build/lufa.avrdude.in
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_dfu.mk
+include $(LUFA_PATH)/Build/lufa_hid.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/Projects/Benito/Benito Programmer.inf b/Projects/Benito/Benito Programmer.inf
index f7caaa7a..81cd6808 100644
--- a/Projects/Benito/Benito Programmer.inf
+++ b/Projects/Benito/Benito Programmer.inf
@@ -1,78 +1,36 @@
 ;************************************************************
 ; Windows USB CDC ACM Setup File
 ; Copyright (c) 2000 Microsoft Corporation
-
+;************************************************************
 
 [Version]
 Signature="$Windows NT$"
 Class=Ports
 ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
 Provider=%MFGNAME%
-LayoutFile=layout.inf
-CatalogFile=%MFGFILENAME%.cat
-DriverVer=11/15/2007,5.1.2600.0
+DriverVer=7/1/2012,10.0.0.0
 
 [Manufacturer]
-%MFGNAME%=DeviceList, NTamd64
-
-[DestinationDirs]
-DefaultDestDir=12
-
-
-;------------------------------------------------------------------------------
-;  Windows 2000/XP/Vista-32bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.nt]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.nt
-AddReg=DriverInstall.nt.AddReg
-
-[DriverCopyFiles.nt]
-usbser.sys,,,0x20
-
-[DriverInstall.nt.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
 
-[DriverInstall.nt.Services]
-AddService=usbser, 0x00000002, DriverService.nt
-
-[DriverService.nt]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-;------------------------------------------------------------------------------
-;  Vista-64bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.NTamd64]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.NTamd64
-AddReg=DriverInstall.NTamd64.AddReg
+[SourceDisksNames]
 
-[DriverCopyFiles.NTamd64]
-%DRIVERFILENAME%.sys,,,0x20
+[SourceDisksFiles]
 
-[DriverInstall.NTamd64.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+[DestinationDirs]
+DefaultDestDir=12
 
-[DriverInstall.NTamd64.Services]
-AddService=usbser, 0x00000002, DriverService.NTamd64
+[DriverInstall]
+Include=mdmcpq.inf
+CopyFiles=FakeModemCopyFileSection
+AddReg=DriverInstall.AddReg
 
-[DriverService.NTamd64]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
+[DriverInstall.Services]
+Include=mdmcpq.inf
+AddService=usbser, 0x00000002, LowerFilter_Service_Inst
 
+[DriverInstall.AddReg]
+HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider"
 
 ;------------------------------------------------------------------------------
 ;  Vendor and Product ID Definitions
@@ -83,14 +41,14 @@ ServiceBinary=%12%\%DRIVERFILENAME%.sys
 ; Note: One INF file can be used for multiple devices with different VID and PIDs.
 ; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
 ;------------------------------------------------------------------------------
-[SourceDisksFiles]
-[SourceDisksNames]
 [DeviceList]
 %DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2060
 
 [DeviceList.NTamd64]
 %DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2060
 
+[DeviceList.NTia64]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2060
 
 ;------------------------------------------------------------------------------
 ;  String Definitions
@@ -98,9 +56,5 @@ ServiceBinary=%12%\%DRIVERFILENAME%.sys
 ;Modify these strings to customize your device
 ;------------------------------------------------------------------------------
 [Strings]
-MFGFILENAME="CDC_vista"
-DRIVERFILENAME ="usbser"
 MFGNAME="http://www.lufa-lib.org"
-INSTDISK="LUFA Benito Programmer Driver Installer"
-DESCRIPTION="Communications Port"
-SERVICE="USB RS-232 Emulation Driver"
-\ No newline at end of file
+DESCRIPTION="LUFA Benito Programmer"
+\ No newline at end of file
diff --git a/Projects/Benito/Doxygen.conf b/Projects/Benito/Doxygen.conf
index 64e72a1a..d89541e5 100644
--- a/Projects/Benito/Doxygen.conf
+++ b/Projects/Benito/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.1
+# Doxyfile 1.8.1.2
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -588,7 +588,7 @@ FILE_VERSION_FILTER    =
 
 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
 # by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. The create the layout file
+# output files in an output format independent way. To create the layout file
 # that represents doxygen's defaults, run doxygen with the -l option.
 # You can optionally specify a file name after the option, if omitted
 # DoxygenLayout.xml will be used as the name of the layout file.
@@ -804,7 +804,7 @@ INLINE_SOURCES         = NO
 
 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
 # doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
+# fragments. Normal C, C++ and Fortran comments will always remain visible.
 
 STRIP_CODE_COMMENTS    = YES
 
@@ -956,9 +956,7 @@ HTML_TIMESTAMP         = NO
 
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
-# page has loaded. For this to work a browser that supports
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+# page has loaded.
 
 HTML_DYNAMIC_SECTIONS  = YES
 
diff --git a/Projects/Benito/makefile b/Projects/Benito/makefile
index 174b23dc..03419e55 100644
--- a/Projects/Benito/makefile
+++ b/Projects/Benito/makefile
@@ -17,7 +17,7 @@ F_USB        = $(F_CPU)
 OPTIMIZATION = s
 TARGET       = Benito
 SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../LUFA/
+LUFA_PATH    = ../../LUFA
 CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
 LD_FLAGS     =
 
@@ -25,9 +25,12 @@ LD_FLAGS     =
 all:
 
 # Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa.core.in
-include $(LUFA_PATH)/Build/lufa.sources.in
-include $(LUFA_PATH)/Build/lufa.build.in
-include $(LUFA_PATH)/Build/lufa.doxygen.in
-include $(LUFA_PATH)/Build/lufa.dfu.in
-include $(LUFA_PATH)/Build/lufa.avrdude.in
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_dfu.mk
+include $(LUFA_PATH)/Build/lufa_hid.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/Projects/HIDReportViewer/Doxygen.conf b/Projects/HIDReportViewer/Doxygen.conf
index 4906ca5e..e96c47f1 100644
--- a/Projects/HIDReportViewer/Doxygen.conf
+++ b/Projects/HIDReportViewer/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.1
+# Doxyfile 1.8.1.2
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -588,7 +588,7 @@ FILE_VERSION_FILTER    =
 
 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
 # by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. The create the layout file
+# output files in an output format independent way. To create the layout file
 # that represents doxygen's defaults, run doxygen with the -l option.
 # You can optionally specify a file name after the option, if omitted
 # DoxygenLayout.xml will be used as the name of the layout file.
@@ -804,7 +804,7 @@ INLINE_SOURCES         = NO
 
 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
 # doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
+# fragments. Normal C, C++ and Fortran comments will always remain visible.
 
 STRIP_CODE_COMMENTS    = YES
 
@@ -956,9 +956,7 @@ HTML_TIMESTAMP         = NO
 
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
-# page has loaded. For this to work a browser that supports
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+# page has loaded.
 
 HTML_DYNAMIC_SECTIONS  = YES
 
diff --git a/Projects/HIDReportViewer/makefile b/Projects/HIDReportViewer/makefile
index 2ec6e8d2..e1d2fabc 100644
--- a/Projects/HIDReportViewer/makefile
+++ b/Projects/HIDReportViewer/makefile
@@ -17,7 +17,7 @@ F_USB        = $(F_CPU)
 OPTIMIZATION = s
 TARGET       = HIDReportViewer
 SRC          = $(TARGET).c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_SERIAL)
-LUFA_PATH    = ../../LUFA/
+LUFA_PATH    = ../../LUFA
 CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
 LD_FLAGS     =
 
@@ -25,9 +25,12 @@ LD_FLAGS     =
 all:
 
 # Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa.core.in
-include $(LUFA_PATH)/Build/lufa.sources.in
-include $(LUFA_PATH)/Build/lufa.build.in
-include $(LUFA_PATH)/Build/lufa.doxygen.in
-include $(LUFA_PATH)/Build/lufa.dfu.in
-include $(LUFA_PATH)/Build/lufa.avrdude.in
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_dfu.mk
+include $(LUFA_PATH)/Build/lufa_hid.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/Projects/LEDNotifier/Doxygen.conf b/Projects/LEDNotifier/Doxygen.conf
index 61467471..9b77d03c 100644
--- a/Projects/LEDNotifier/Doxygen.conf
+++ b/Projects/LEDNotifier/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.1
+# Doxyfile 1.8.1.2
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -588,7 +588,7 @@ FILE_VERSION_FILTER    =
 
 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
 # by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. The create the layout file
+# output files in an output format independent way. To create the layout file
 # that represents doxygen's defaults, run doxygen with the -l option.
 # You can optionally specify a file name after the option, if omitted
 # DoxygenLayout.xml will be used as the name of the layout file.
@@ -807,7 +807,7 @@ INLINE_SOURCES         = NO
 
 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
 # doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
+# fragments. Normal C, C++ and Fortran comments will always remain visible.
 
 STRIP_CODE_COMMENTS    = YES
 
@@ -959,9 +959,7 @@ HTML_TIMESTAMP         = NO
 
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
-# page has loaded. For this to work a browser that supports
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+# page has loaded.
 
 HTML_DYNAMIC_SECTIONS  = YES
 
diff --git a/Projects/LEDNotifier/LUFA LED Notifier.inf b/Projects/LEDNotifier/LUFA LED Notifier.inf
index 3951c22d..8890ba1a 100644
--- a/Projects/LEDNotifier/LUFA LED Notifier.inf
+++ b/Projects/LEDNotifier/LUFA LED Notifier.inf
@@ -1,78 +1,36 @@
 ;************************************************************
 ; Windows USB CDC ACM Setup File
 ; Copyright (c) 2000 Microsoft Corporation
-
+;************************************************************
 
 [Version]
 Signature="$Windows NT$"
 Class=Ports
 ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
 Provider=%MFGNAME%
-LayoutFile=layout.inf
-CatalogFile=%MFGFILENAME%.cat
-DriverVer=11/15/2007,5.1.2600.0
+DriverVer=7/1/2012,10.0.0.0
 
 [Manufacturer]
-%MFGNAME%=DeviceList, NTamd64
-
-[DestinationDirs]
-DefaultDestDir=12
-
-
-;------------------------------------------------------------------------------
-;  Windows 2000/XP/Vista-32bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.nt]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.nt
-AddReg=DriverInstall.nt.AddReg
-
-[DriverCopyFiles.nt]
-usbser.sys,,,0x20
-
-[DriverInstall.nt.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
 
-[DriverInstall.nt.Services]
-AddService=usbser, 0x00000002, DriverService.nt
-
-[DriverService.nt]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-;------------------------------------------------------------------------------
-;  Vista-64bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.NTamd64]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.NTamd64
-AddReg=DriverInstall.NTamd64.AddReg
+[SourceDisksNames]
 
-[DriverCopyFiles.NTamd64]
-%DRIVERFILENAME%.sys,,,0x20
+[SourceDisksFiles]
 
-[DriverInstall.NTamd64.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+[DestinationDirs]
+DefaultDestDir=12
 
-[DriverInstall.NTamd64.Services]
-AddService=usbser, 0x00000002, DriverService.NTamd64
+[DriverInstall]
+Include=mdmcpq.inf
+CopyFiles=FakeModemCopyFileSection
+AddReg=DriverInstall.AddReg
 
-[DriverService.NTamd64]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
+[DriverInstall.Services]
+Include=mdmcpq.inf
+AddService=usbser, 0x00000002, LowerFilter_Service_Inst
 
+[DriverInstall.AddReg]
+HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider"
 
 ;------------------------------------------------------------------------------
 ;  Vendor and Product ID Definitions
@@ -83,14 +41,14 @@ ServiceBinary=%12%\%DRIVERFILENAME%.sys
 ; Note: One INF file can be used for multiple devices with different VID and PIDs.
 ; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
 ;------------------------------------------------------------------------------
-[SourceDisksFiles]
-[SourceDisksNames]
 [DeviceList]
 %DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
 
 [DeviceList.NTamd64]
 %DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
 
+[DeviceList.NTia64]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044
 
 ;------------------------------------------------------------------------------
 ;  String Definitions
@@ -98,9 +56,5 @@ ServiceBinary=%12%\%DRIVERFILENAME%.sys
 ;Modify these strings to customize your device
 ;------------------------------------------------------------------------------
 [Strings]
-MFGFILENAME="CDC_vista"
-DRIVERFILENAME ="usbser"
 MFGNAME="http://www.lufa-lib.org"
-INSTDISK="LUFA CDC Driver Installer"
-DESCRIPTION="Communications Port"
-SERVICE="USB RS-232 Emulation Driver"
-\ No newline at end of file
+DESCRIPTION="LUFA CDC-ACM Virtual Serial Port"
+\ No newline at end of file
diff --git a/Projects/LEDNotifier/makefile b/Projects/LEDNotifier/makefile
index 5839d6fc..80836fff 100644
--- a/Projects/LEDNotifier/makefile
+++ b/Projects/LEDNotifier/makefile
@@ -17,7 +17,7 @@ F_USB        = $(F_CPU)
 OPTIMIZATION = s
 TARGET       = LEDNotifier
 SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../LUFA/
+LUFA_PATH    = ../../LUFA
 CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
 LD_FLAGS     =
 
@@ -25,9 +25,12 @@ LD_FLAGS     =
 all:
 
 # Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa.core.in
-include $(LUFA_PATH)/Build/lufa.sources.in
-include $(LUFA_PATH)/Build/lufa.build.in
-include $(LUFA_PATH)/Build/lufa.doxygen.in
-include $(LUFA_PATH)/Build/lufa.dfu.in
-include $(LUFA_PATH)/Build/lufa.avrdude.in
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_dfu.mk
+include $(LUFA_PATH)/Build/lufa_hid.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/Projects/MIDIToneGenerator/Doxygen.conf b/Projects/MIDIToneGenerator/Doxygen.conf
index 277c6159..1786fd7b 100644
--- a/Projects/MIDIToneGenerator/Doxygen.conf
+++ b/Projects/MIDIToneGenerator/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.1
+# Doxyfile 1.8.1.2
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -588,7 +588,7 @@ FILE_VERSION_FILTER    =
 
 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
 # by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. The create the layout file
+# output files in an output format independent way. To create the layout file
 # that represents doxygen's defaults, run doxygen with the -l option.
 # You can optionally specify a file name after the option, if omitted
 # DoxygenLayout.xml will be used as the name of the layout file.
@@ -804,7 +804,7 @@ INLINE_SOURCES         = NO
 
 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
 # doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
+# fragments. Normal C, C++ and Fortran comments will always remain visible.
 
 STRIP_CODE_COMMENTS    = YES
 
@@ -956,9 +956,7 @@ HTML_TIMESTAMP         = NO
 
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
-# page has loaded. For this to work a browser that supports
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+# page has loaded.
 
 HTML_DYNAMIC_SECTIONS  = YES
 
diff --git a/Projects/MIDIToneGenerator/makefile b/Projects/MIDIToneGenerator/makefile
index d3b52273..2bd8bb52 100644
--- a/Projects/MIDIToneGenerator/makefile
+++ b/Projects/MIDIToneGenerator/makefile
@@ -17,7 +17,7 @@ F_USB        = $(F_CPU)
 OPTIMIZATION = s
 TARGET       = MIDIToneGenerator
 SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../LUFA/
+LUFA_PATH    = ../../LUFA
 CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
 LD_FLAGS     =
 
@@ -25,9 +25,12 @@ LD_FLAGS     =
 all:
 
 # Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa.core.in
-include $(LUFA_PATH)/Build/lufa.sources.in
-include $(LUFA_PATH)/Build/lufa.build.in
-include $(LUFA_PATH)/Build/lufa.doxygen.in
-include $(LUFA_PATH)/Build/lufa.dfu.in
-include $(LUFA_PATH)/Build/lufa.avrdude.in
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_dfu.mk
+include $(LUFA_PATH)/Build/lufa_hid.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/Projects/Magstripe/Doxygen.conf b/Projects/Magstripe/Doxygen.conf
index aaddc869..eb5fb2e7 100644
--- a/Projects/Magstripe/Doxygen.conf
+++ b/Projects/Magstripe/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.1
+# Doxyfile 1.8.1.2
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -588,7 +588,7 @@ FILE_VERSION_FILTER    =
 
 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
 # by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. The create the layout file
+# output files in an output format independent way. To create the layout file
 # that represents doxygen's defaults, run doxygen with the -l option.
 # You can optionally specify a file name after the option, if omitted
 # DoxygenLayout.xml will be used as the name of the layout file.
@@ -804,7 +804,7 @@ INLINE_SOURCES         = NO
 
 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
 # doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
+# fragments. Normal C, C++ and Fortran comments will always remain visible.
 
 STRIP_CODE_COMMENTS    = YES
 
@@ -956,9 +956,7 @@ HTML_TIMESTAMP         = NO
 
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
-# page has loaded. For this to work a browser that supports
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+# page has loaded.
 
 HTML_DYNAMIC_SECTIONS  = YES
 
diff --git a/Projects/Magstripe/Lib/CircularBitBuffer.h b/Projects/Magstripe/Lib/CircularBitBuffer.h
index 6a0dcd53..d037a66d 100644
--- a/Projects/Magstripe/Lib/CircularBitBuffer.h
+++ b/Projects/Magstripe/Lib/CircularBitBuffer.h
@@ -71,7 +71,7 @@
 		} BitBuffer_t;
 
 	/* Function Prototypes: */
-		/** Initialises or resets a given bit buffer, ready to store new bits.
+		/** Initializes or resets a given bit buffer, ready to store new bits.
 		 *
 		 *  \param[in,out] Buffer  Bit buffer to initialize
 		 */
diff --git a/Projects/Magstripe/Lib/MagstripeHW.h b/Projects/Magstripe/Lib/MagstripeHW.h
index 177e26b0..43e34443 100644
--- a/Projects/Magstripe/Lib/MagstripeHW.h
+++ b/Projects/Magstripe/Lib/MagstripeHW.h
@@ -77,7 +77,7 @@
 
 	/* Public Interface - May be used in end-application: */
 		/* Inline Functions: */
-			/** Initialises the magnetic stripe card reader ports and pins so that the card reader
+			/** Initializes the magnetic stripe card reader ports and pins so that the card reader
 			 *  device can be controlled and read by the card reader driver. This must be called before
 			 *  trying to read any of the card reader's status lines.
 			 */
diff --git a/Projects/Magstripe/makefile b/Projects/Magstripe/makefile
index ae16e717..246deaf9 100644
--- a/Projects/Magstripe/makefile
+++ b/Projects/Magstripe/makefile
@@ -17,7 +17,7 @@ F_USB        = $(F_CPU)
 OPTIMIZATION = s
 TARGET       = Magstripe
 SRC          = $(TARGET).c Descriptors.c Lib/CircularBitBuffer.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../LUFA/
+LUFA_PATH    = ../../LUFA
 CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
 LD_FLAGS     =
 
@@ -25,9 +25,12 @@ LD_FLAGS     =
 all:
 
 # Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa.core.in
-include $(LUFA_PATH)/Build/lufa.sources.in
-include $(LUFA_PATH)/Build/lufa.build.in
-include $(LUFA_PATH)/Build/lufa.doxygen.in
-include $(LUFA_PATH)/Build/lufa.dfu.in
-include $(LUFA_PATH)/Build/lufa.avrdude.in
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_dfu.mk
+include $(LUFA_PATH)/Build/lufa_hid.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/Projects/MediaController/Doxygen.conf b/Projects/MediaController/Doxygen.conf
index 32c532d9..40ebf913 100644
--- a/Projects/MediaController/Doxygen.conf
+++ b/Projects/MediaController/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.1
+# Doxyfile 1.8.1.2
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -588,7 +588,7 @@ FILE_VERSION_FILTER    =
 
 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
 # by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. The create the layout file
+# output files in an output format independent way. To create the layout file
 # that represents doxygen's defaults, run doxygen with the -l option.
 # You can optionally specify a file name after the option, if omitted
 # DoxygenLayout.xml will be used as the name of the layout file.
@@ -804,7 +804,7 @@ INLINE_SOURCES         = NO
 
 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
 # doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
+# fragments. Normal C, C++ and Fortran comments will always remain visible.
 
 STRIP_CODE_COMMENTS    = YES
 
@@ -956,9 +956,7 @@ HTML_TIMESTAMP         = NO
 
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
-# page has loaded. For this to work a browser that supports
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+# page has loaded.
 
 HTML_DYNAMIC_SECTIONS  = YES
 
diff --git a/Projects/MediaController/makefile b/Projects/MediaController/makefile
index a87a7576..e7507847 100644
--- a/Projects/MediaController/makefile
+++ b/Projects/MediaController/makefile
@@ -17,7 +17,7 @@ F_USB        = $(F_CPU)
 OPTIMIZATION = s
 TARGET       = MediaController
 SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../LUFA/
+LUFA_PATH    = ../../LUFA
 CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
 LD_FLAGS     =
 
@@ -25,9 +25,12 @@ LD_FLAGS     =
 all:
 
 # Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa.core.in
-include $(LUFA_PATH)/Build/lufa.sources.in
-include $(LUFA_PATH)/Build/lufa.build.in
-include $(LUFA_PATH)/Build/lufa.doxygen.in
-include $(LUFA_PATH)/Build/lufa.dfu.in
-include $(LUFA_PATH)/Build/lufa.avrdude.in
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_dfu.mk
+include $(LUFA_PATH)/Build/lufa_hid.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/Projects/MissileLauncher/Doxygen.conf b/Projects/MissileLauncher/Doxygen.conf
index 512649df..4454d293 100644
--- a/Projects/MissileLauncher/Doxygen.conf
+++ b/Projects/MissileLauncher/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.1
+# Doxyfile 1.8.1.2
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -588,7 +588,7 @@ FILE_VERSION_FILTER    =
 
 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
 # by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. The create the layout file
+# output files in an output format independent way. To create the layout file
 # that represents doxygen's defaults, run doxygen with the -l option.
 # You can optionally specify a file name after the option, if omitted
 # DoxygenLayout.xml will be used as the name of the layout file.
@@ -804,7 +804,7 @@ INLINE_SOURCES         = NO
 
 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
 # doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
+# fragments. Normal C, C++ and Fortran comments will always remain visible.
 
 STRIP_CODE_COMMENTS    = YES
 
@@ -956,9 +956,7 @@ HTML_TIMESTAMP         = NO
 
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
-# page has loaded. For this to work a browser that supports
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+# page has loaded.
 
 HTML_DYNAMIC_SECTIONS  = YES
 
diff --git a/Projects/MissileLauncher/makefile b/Projects/MissileLauncher/makefile
index aac92545..58bb8f31 100644
--- a/Projects/MissileLauncher/makefile
+++ b/Projects/MissileLauncher/makefile
@@ -17,7 +17,7 @@ F_USB        = $(F_CPU)
 OPTIMIZATION = s
 TARGET       = MissileLauncher
 SRC          = $(TARGET).c ConfigDescriptor.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../LUFA/
+LUFA_PATH    = ../../LUFA
 CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
 LD_FLAGS     =
 
@@ -25,9 +25,12 @@ LD_FLAGS     =
 all:
 
 # Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa.core.in
-include $(LUFA_PATH)/Build/lufa.sources.in
-include $(LUFA_PATH)/Build/lufa.build.in
-include $(LUFA_PATH)/Build/lufa.doxygen.in
-include $(LUFA_PATH)/Build/lufa.dfu.in
-include $(LUFA_PATH)/Build/lufa.avrdude.in
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_dfu.mk
+include $(LUFA_PATH)/Build/lufa_hid.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/Projects/RelayBoard/Doxygen.conf b/Projects/RelayBoard/Doxygen.conf
index dc116f0c..66909d09 100644
--- a/Projects/RelayBoard/Doxygen.conf
+++ b/Projects/RelayBoard/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.1
+# Doxyfile 1.8.1.2
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -588,7 +588,7 @@ FILE_VERSION_FILTER    =
 
 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
 # by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. The create the layout file
+# output files in an output format independent way. To create the layout file
 # that represents doxygen's defaults, run doxygen with the -l option.
 # You can optionally specify a file name after the option, if omitted
 # DoxygenLayout.xml will be used as the name of the layout file.
@@ -804,7 +804,7 @@ INLINE_SOURCES         = NO
 
 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
 # doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
+# fragments. Normal C, C++ and Fortran comments will always remain visible.
 
 STRIP_CODE_COMMENTS    = YES
 
@@ -956,9 +956,7 @@ HTML_TIMESTAMP         = NO
 
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
-# page has loaded. For this to work a browser that supports
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+# page has loaded.
 
 HTML_DYNAMIC_SECTIONS  = YES
 
diff --git a/Projects/RelayBoard/makefile b/Projects/RelayBoard/makefile
index d4b40b77..02767fff 100644
--- a/Projects/RelayBoard/makefile
+++ b/Projects/RelayBoard/makefile
@@ -17,7 +17,7 @@ F_USB        = $(F_CPU)
 OPTIMIZATION = s
 TARGET       = RelayBoard
 SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../LUFA/
+LUFA_PATH    = ../../LUFA
 CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
 LD_FLAGS     =
 
@@ -25,9 +25,12 @@ LD_FLAGS     =
 all:
 
 # Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa.core.in
-include $(LUFA_PATH)/Build/lufa.sources.in
-include $(LUFA_PATH)/Build/lufa.build.in
-include $(LUFA_PATH)/Build/lufa.doxygen.in
-include $(LUFA_PATH)/Build/lufa.dfu.in
-include $(LUFA_PATH)/Build/lufa.avrdude.in
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_dfu.mk
+include $(LUFA_PATH)/Build/lufa_hid.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/Projects/SerialToLCD/Doxygen.conf b/Projects/SerialToLCD/Doxygen.conf
index b16a3b8a..a04837b8 100644
--- a/Projects/SerialToLCD/Doxygen.conf
+++ b/Projects/SerialToLCD/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.1
+# Doxyfile 1.8.1.2
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -588,7 +588,7 @@ FILE_VERSION_FILTER    =
 
 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
 # by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. The create the layout file
+# output files in an output format independent way. To create the layout file
 # that represents doxygen's defaults, run doxygen with the -l option.
 # You can optionally specify a file name after the option, if omitted
 # DoxygenLayout.xml will be used as the name of the layout file.
@@ -804,7 +804,7 @@ INLINE_SOURCES         = NO
 
 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
 # doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
+# fragments. Normal C, C++ and Fortran comments will always remain visible.
 
 STRIP_CODE_COMMENTS    = YES
 
@@ -956,9 +956,7 @@ HTML_TIMESTAMP         = NO
 
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
-# page has loaded. For this to work a browser that supports
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+# page has loaded.
 
 HTML_DYNAMIC_SECTIONS  = YES
 
diff --git a/Projects/SerialToLCD/Lib/HD44780.c b/Projects/SerialToLCD/Lib/HD44780.c
index 7bf989d2..0ffe7c47 100644
--- a/Projects/SerialToLCD/Lib/HD44780.c
+++ b/Projects/SerialToLCD/Lib/HD44780.c
@@ -104,7 +104,7 @@ static void HD44780_PowerUp4Bit(void)
 	_delay_us(50);
 }
 
-void HD44780_Initialise(void)
+void HD44780_Initialize(void)
 {
 	PORTD &= ~ALL_BITS;
 	DDRD  |=  ALL_BITS;
diff --git a/Projects/SerialToLCD/Lib/HD44780.h b/Projects/SerialToLCD/Lib/HD44780.h
index 680e69bc..165e32aa 100644
--- a/Projects/SerialToLCD/Lib/HD44780.h
+++ b/Projects/SerialToLCD/Lib/HD44780.h
@@ -57,7 +57,7 @@
 		#define CMD_DISPLAY_ON      0x0C
 
 	/* Function Prototypes: */
-		void HD44780_Initialise(void);
+		void HD44780_Initialize(void);
 		void HD44780_WriteData(const uint8_t c);
 		void HD44780_WriteCommand(const uint8_t c);
 
diff --git a/Projects/SerialToLCD/SerialToLCD.c b/Projects/SerialToLCD/SerialToLCD.c
index 952e2d4f..b94c5a4a 100644
--- a/Projects/SerialToLCD/SerialToLCD.c
+++ b/Projects/SerialToLCD/SerialToLCD.c
@@ -148,7 +148,7 @@ void SetupHardware(void)
 	USB_Init();
 
 	/* Power up the HD44780 Interface */
-	HD44780_Initialise();
+	HD44780_Initialize();
 	HD44780_WriteCommand(CMD_DISPLAY_ON);
 	
 	/* Start the flush timer so that overflows occur rapidly to push received bytes to the USB interface */
diff --git a/Projects/SerialToLCD/SerialToLCD.txt b/Projects/SerialToLCD/SerialToLCD.txt
index 8058ee52..cb30b6bc 100644
--- a/Projects/SerialToLCD/SerialToLCD.txt
+++ b/Projects/SerialToLCD/SerialToLCD.txt
@@ -1,97 +1,97 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Simon Foster's USB Serial to HD44780 LCD Project
- *
- *  \section Sec_Compat Project Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this project.
- *
- *  \li AT90USB162
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this project.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Communications Device Class (CDC)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Abstract Control Model (ACM)</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF CDC Class Standard</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Firmware for a USB Virtual Serial to HD44780 LCD controller project, by Simon Foster. This
- *  project connects a standard HD7780 compatible LCD controller to a PC via a virtual serial
- *  link, so that data supplied by the host can be written to the display. This project is
- *  designed to use the Minimum USB AVR board, however it can be modified to suit other hardware
- *  if desired.
- *
- *  LCD Datasheet:    http://www.sparkfun.com/datasheets/LCD/HD44780.pdf \n
- *  More Information: http://en.wikipedia.org/wiki/HD44780_Character_LCD \n
- *
- *  Below are the connections between the AVR Minimus board and LCD.
- *
- *  <table>
- *   <tr>
- *    <td><b>AVR Pin:</b></td>
- *    <td><b>HD44780 LCD Pin:</b></td>
- *   </tr>
- *   <tr>
- *    <td>VCC</td>
- *    <td>VCC</td>
- *   </tr>
- *   <tr>
- *    <td>GND</td>
- *    <td>GND</td>
- *   </tr>
- *   <tr>
- *    <td>PD0</td>
- *    <td>DB4</td>
- *   </tr>
- *   <tr>
- *    <td>PD1</td>
- *    <td>DB5</td>
- *   </tr>
- *   <tr>
- *    <td>PD2</td>
- *    <td>DB6</td>
- *   </tr>
- *   <tr>
- *    <td>PD3</td>
- *    <td>DB7</td>
- *   </tr>
- *   <tr>
- *    <td>PD4</td>
- *    <td>/RS</td>
- *   </tr>
- *   <tr>
- *    <td>GND</td>
- *    <td>/RW</td>
- *   </tr>
- *   <tr>
- *    <td>PD7</td>
- *    <td>/E</td>
- *   </tr>
- *  </table>
- */
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Simon Foster's USB Serial to HD44780 LCD Project
+ *
+ *  \section Sec_Compat Project Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this project.
+ *
+ *  \li AT90USB162
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this project.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Communications Device Class (CDC)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Abstract Control Model (ACM)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF CDC Class Standard</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Firmware for a USB Virtual Serial to HD44780 LCD controller project, by Simon Foster. This
+ *  project connects a standard HD7780 compatible LCD controller to a PC via a virtual serial
+ *  link, so that data supplied by the host can be written to the display. This project is
+ *  designed to use the Minimum USB AVR board, however it can be modified to suit other hardware
+ *  if desired.
+ *
+ *  LCD Datasheet:    http://www.sparkfun.com/datasheets/LCD/HD44780.pdf \n
+ *  More Information: http://en.wikipedia.org/wiki/HD44780_Character_LCD \n
+ *
+ *  Below are the connections between the AVR Minimus board and LCD.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>AVR Pin:</b></td>
+ *    <td><b>HD44780 LCD Pin:</b></td>
+ *   </tr>
+ *   <tr>
+ *    <td>VCC</td>
+ *    <td>VCC</td>
+ *   </tr>
+ *   <tr>
+ *    <td>GND</td>
+ *    <td>GND</td>
+ *   </tr>
+ *   <tr>
+ *    <td>PD0</td>
+ *    <td>DB4</td>
+ *   </tr>
+ *   <tr>
+ *    <td>PD1</td>
+ *    <td>DB5</td>
+ *   </tr>
+ *   <tr>
+ *    <td>PD2</td>
+ *    <td>DB6</td>
+ *   </tr>
+ *   <tr>
+ *    <td>PD3</td>
+ *    <td>DB7</td>
+ *   </tr>
+ *   <tr>
+ *    <td>PD4</td>
+ *    <td>/RS</td>
+ *   </tr>
+ *   <tr>
+ *    <td>GND</td>
+ *    <td>/RW</td>
+ *   </tr>
+ *   <tr>
+ *    <td>PD7</td>
+ *    <td>/E</td>
+ *   </tr>
+ *  </table>
+ */
diff --git a/Projects/SerialToLCD/makefile b/Projects/SerialToLCD/makefile
index dd48194b..02f43daf 100644
--- a/Projects/SerialToLCD/makefile
+++ b/Projects/SerialToLCD/makefile
@@ -1,34 +1,36 @@
-#
-#             LUFA Library
-#     Copyright (C) Dean Camera, 2012.
-#
-#  dean [at] fourwalledcubicle [dot] com
-#           www.lufa-lib.org
-#
-# --------------------------------------
-#         LUFA Project Makefile.
-# --------------------------------------
-
-MCU          = at90usb162
-ARCH         = AVR8
-BOARD        = MINIMUS
-F_CPU        = 16000000
-F_USB        = $(F_CPU)
-OPTIMIZATION = s
-TARGET       = SerialToLCD
-SRC          = $(TARGET).c Descriptors.c Lib/HD44780.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../LUFA/
-C_STANDARD   = gnu99
-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS     =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa.core.in
-include $(LUFA_PATH)/Build/lufa.sources.in
-include $(LUFA_PATH)/Build/lufa.build.in
-include $(LUFA_PATH)/Build/lufa.doxygen.in
-include $(LUFA_PATH)/Build/lufa.dfu.in
-include $(LUFA_PATH)/Build/lufa.avrdude.in
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2012.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+MCU          = at90usb162
+ARCH         = AVR8
+BOARD        = MINIMUS
+F_CPU        = 16000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = SerialToLCD
+SRC          = $(TARGET).c Descriptors.c Lib/HD44780.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA build script makefiles
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_dfu.mk
+include $(LUFA_PATH)/Build/lufa_hid.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/Projects/TempDataLogger/Doxygen.conf b/Projects/TempDataLogger/Doxygen.conf
index 70f6e0ae..04859f62 100644
--- a/Projects/TempDataLogger/Doxygen.conf
+++ b/Projects/TempDataLogger/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.1
+# Doxyfile 1.8.1.2
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -588,7 +588,7 @@ FILE_VERSION_FILTER    =
 
 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
 # by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. The create the layout file
+# output files in an output format independent way. To create the layout file
 # that represents doxygen's defaults, run doxygen with the -l option.
 # You can optionally specify a file name after the option, if omitted
 # DoxygenLayout.xml will be used as the name of the layout file.
@@ -805,7 +805,7 @@ INLINE_SOURCES         = NO
 
 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
 # doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
+# fragments. Normal C, C++ and Fortran comments will always remain visible.
 
 STRIP_CODE_COMMENTS    = YES
 
@@ -957,9 +957,7 @@ HTML_TIMESTAMP         = NO
 
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
-# page has loaded. For this to work a browser that supports
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+# page has loaded.
 
 HTML_DYNAMIC_SECTIONS  = YES
 
diff --git a/Projects/TempDataLogger/Lib/DataflashManager.h b/Projects/TempDataLogger/Lib/DataflashManager.h
index 90236260..784ede47 100644
--- a/Projects/TempDataLogger/Lib/DataflashManager.h
+++ b/Projects/TempDataLogger/Lib/DataflashManager.h
@@ -53,7 +53,7 @@
 		#endif
 
 	/* Defines: */
-		/** Total number of bytes of the storage medium, comprised of one or more dataflash ICs. */
+		/** Total number of bytes of the storage medium, comprised of one or more Dataflash ICs. */
 		#define VIRTUAL_MEMORY_BYTES                ((uint32_t)DATAFLASH_PAGES * DATAFLASH_PAGE_SIZE * DATAFLASH_TOTALCHIPS)
 
 		/** Block size of the device. This is kept at 512 to remain compatible with the OS despite the underlying
diff --git a/Projects/TempDataLogger/TempDataLogger.c b/Projects/TempDataLogger/TempDataLogger.c
index 9ead42ed..eb63bc6a 100644
--- a/Projects/TempDataLogger/TempDataLogger.c
+++ b/Projects/TempDataLogger/TempDataLogger.c
@@ -227,7 +227,7 @@ void EVENT_USB_Device_Connect(void)
 {
 	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
 
-	/* Close the log file so that the host has exclusive filesystem access */
+	/* Close the log file so that the host has exclusive file system access */
 	CloseLogFile();
 }
 
diff --git a/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.Designer.cs b/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.Designer.cs
index 7b4249c4..58fac514 100644
--- a/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.Designer.cs
+++ b/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.Designer.cs
@@ -157,7 +157,7 @@
             this.MaximizeBox = false;
             this.MinimizeBox = false;
             this.Name = "frmDataloggerSettings";
-            this.Text = "DataLogger";
+            this.Text = "Datalogger";
             this.Load += new System.EventHandler(this.frmDataloggerSettings_Load);
             ((System.ComponentModel.ISupportInitialize)(this.nudLogInterval)).EndInit();
             this.ResumeLayout(false);
diff --git a/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.cs b/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.cs
index 98e6006f..01e9fb6e 100644
--- a/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.cs
+++ b/Projects/TempDataLogger/TempLogHostApp/DataLoggerSettings.cs
@@ -85,7 +85,7 @@ namespace Project1HostApp
 
             if (ConnectionHandle == null)
             {
-                MessageBox.Show("Error: Cannot connect to DataLogger device.");
+                MessageBox.Show("Error: Cannot connect to Datalogger device.");
                 return;
             }
 
@@ -115,7 +115,7 @@ namespace Project1HostApp
 
             if (ConnectionHandle == null)
             {
-                MessageBox.Show("Error: Cannot connect to DataLogger device.");
+                MessageBox.Show("Error: Cannot connect to Datalogger device.");
                 return;
             }
 
diff --git a/Projects/TempDataLogger/TempLogHostApp/Properties/AssemblyInfo.cs b/Projects/TempDataLogger/TempLogHostApp/Properties/AssemblyInfo.cs
index c6fd450c..a4d0ab1d 100644
--- a/Projects/TempDataLogger/TempLogHostApp/Properties/AssemblyInfo.cs
+++ b/Projects/TempDataLogger/TempLogHostApp/Properties/AssemblyInfo.cs
@@ -9,7 +9,7 @@ using System.Runtime.InteropServices;
 [assembly: AssemblyDescription("")]
 [assembly: AssemblyConfiguration("")]
 [assembly: AssemblyCompany("Dean Camera")]
-[assembly: AssemblyProduct("Temp DataLogger HostApp")]
+[assembly: AssemblyProduct("Temp Datalogger HostApp")]
 [assembly: AssemblyCopyright("Copyright © Dean Camera 2011")]
 [assembly: AssemblyTrademark("")]
 [assembly: AssemblyCulture("")]
diff --git a/Projects/TempDataLogger/TempLogHostApp/README.txt b/Projects/TempDataLogger/TempLogHostApp/README.txt
index 60387afe..ab6b9a83 100644
--- a/Projects/TempDataLogger/TempLogHostApp/README.txt
+++ b/Projects/TempDataLogger/TempLogHostApp/README.txt
@@ -1,3 +1,5 @@
+http://en.sourceforge.jp/projects/sfnet_libhidnet/
+
 This library has been tested on Windows Vista 32bit, Windows Vista 64bit,
 Windows XP 32bit and Debian (Lenny) AMD64 but should work on any version of
 Windows that can run the .NET framework 2.0 and any other operating system
diff --git a/Projects/TempDataLogger/makefile b/Projects/TempDataLogger/makefile
index 860ff237..40a754a8 100644
--- a/Projects/TempDataLogger/makefile
+++ b/Projects/TempDataLogger/makefile
@@ -18,7 +18,7 @@ OPTIMIZATION = s
 TARGET       = TempDataLogger
 SRC          = $(TARGET).c Descriptors.c Lib/DataflashManager.c Lib/DS1307.c Lib/SCSI.c Lib/FATFs/diskio.c Lib/FATFs/ff.c \
                $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_SERIAL) $(LUFA_SRC_TWI) $(LUFA_SRC_TEMPERATURE)
-LUFA_PATH    = ../../LUFA/
+LUFA_PATH    = ../../LUFA
 CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
 LD_FLAGS     =
 
@@ -26,9 +26,12 @@ LD_FLAGS     =
 all:
 
 # Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa.core.in
-include $(LUFA_PATH)/Build/lufa.sources.in
-include $(LUFA_PATH)/Build/lufa.build.in
-include $(LUFA_PATH)/Build/lufa.doxygen.in
-include $(LUFA_PATH)/Build/lufa.dfu.in
-include $(LUFA_PATH)/Build/lufa.avrdude.in
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_dfu.mk
+include $(LUFA_PATH)/Build/lufa_hid.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/Projects/USBtoSerial/Doxygen.conf b/Projects/USBtoSerial/Doxygen.conf
index ae0ed482..836a38b9 100644
--- a/Projects/USBtoSerial/Doxygen.conf
+++ b/Projects/USBtoSerial/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.1
+# Doxyfile 1.8.1.2
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -588,7 +588,7 @@ FILE_VERSION_FILTER    =
 
 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
 # by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. The create the layout file
+# output files in an output format independent way. To create the layout file
 # that represents doxygen's defaults, run doxygen with the -l option.
 # You can optionally specify a file name after the option, if omitted
 # DoxygenLayout.xml will be used as the name of the layout file.
@@ -804,7 +804,7 @@ INLINE_SOURCES         = NO
 
 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
 # doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
+# fragments. Normal C, C++ and Fortran comments will always remain visible.
 
 STRIP_CODE_COMMENTS    = YES
 
@@ -956,9 +956,7 @@ HTML_TIMESTAMP         = NO
 
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
-# page has loaded. For this to work a browser that supports
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+# page has loaded.
 
 HTML_DYNAMIC_SECTIONS  = YES
 
diff --git a/Projects/USBtoSerial/LUFA USBtoSerial.inf b/Projects/USBtoSerial/LUFA USBtoSerial.inf
index 99077836..e03ccc7a 100644
--- a/Projects/USBtoSerial/LUFA USBtoSerial.inf
+++ b/Projects/USBtoSerial/LUFA USBtoSerial.inf
@@ -1,78 +1,36 @@
 ;************************************************************
 ; Windows USB CDC ACM Setup File
 ; Copyright (c) 2000 Microsoft Corporation
-
+;************************************************************
 
 [Version]
 Signature="$Windows NT$"
 Class=Ports
 ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
 Provider=%MFGNAME%
-LayoutFile=layout.inf
-CatalogFile=%MFGFILENAME%.cat
-DriverVer=11/15/2007,5.1.2600.0
+DriverVer=7/1/2012,10.0.0.0
 
 [Manufacturer]
-%MFGNAME%=DeviceList, NTamd64
-
-[DestinationDirs]
-DefaultDestDir=12
-
-
-;------------------------------------------------------------------------------
-;  Windows 2000/XP/Vista-32bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.nt]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.nt
-AddReg=DriverInstall.nt.AddReg
-
-[DriverCopyFiles.nt]
-usbser.sys,,,0x20
-
-[DriverInstall.nt.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
 
-[DriverInstall.nt.Services]
-AddService=usbser, 0x00000002, DriverService.nt
-
-[DriverService.nt]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-;------------------------------------------------------------------------------
-;  Vista-64bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.NTamd64]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.NTamd64
-AddReg=DriverInstall.NTamd64.AddReg
+[SourceDisksNames]
 
-[DriverCopyFiles.NTamd64]
-%DRIVERFILENAME%.sys,,,0x20
+[SourceDisksFiles]
 
-[DriverInstall.NTamd64.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+[DestinationDirs]
+DefaultDestDir=12
 
-[DriverInstall.NTamd64.Services]
-AddService=usbser, 0x00000002, DriverService.NTamd64
+[DriverInstall]
+Include=mdmcpq.inf
+CopyFiles=FakeModemCopyFileSection
+AddReg=DriverInstall.AddReg
 
-[DriverService.NTamd64]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
+[DriverInstall.Services]
+Include=mdmcpq.inf
+AddService=usbser, 0x00000002, LowerFilter_Service_Inst
 
+[DriverInstall.AddReg]
+HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider"
 
 ;------------------------------------------------------------------------------
 ;  Vendor and Product ID Definitions
@@ -83,14 +41,14 @@ ServiceBinary=%12%\%DRIVERFILENAME%.sys
 ; Note: One INF file can be used for multiple devices with different VID and PIDs.
 ; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
 ;------------------------------------------------------------------------------
-[SourceDisksFiles]
-[SourceDisksNames]
 [DeviceList]
 %DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204B
 
 [DeviceList.NTamd64]
 %DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204B
 
+[DeviceList.NTia64]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204B
 
 ;------------------------------------------------------------------------------
 ;  String Definitions
@@ -98,9 +56,5 @@ ServiceBinary=%12%\%DRIVERFILENAME%.sys
 ;Modify these strings to customize your device
 ;------------------------------------------------------------------------------
 [Strings]
-MFGFILENAME="CDC_vista"
-DRIVERFILENAME ="usbser"
 MFGNAME="http://www.lufa-lib.org"
-INSTDISK="LUFA USB-RS232 CDC Driver Installer"
-DESCRIPTION="Communications Port"
-SERVICE="USB RS-232 Emulation Driver"
-\ No newline at end of file
+DESCRIPTION="LUFA USB to Serial"
+\ No newline at end of file
diff --git a/Projects/USBtoSerial/makefile b/Projects/USBtoSerial/makefile
index 4f8cb371..37cb2353 100644
--- a/Projects/USBtoSerial/makefile
+++ b/Projects/USBtoSerial/makefile
@@ -17,7 +17,7 @@ F_USB        = $(F_CPU)
 OPTIMIZATION = s
 TARGET       = USBtoSerial
 SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../LUFA/
+LUFA_PATH    = ../../LUFA
 CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
 LD_FLAGS     =
 
@@ -25,9 +25,12 @@ LD_FLAGS     =
 all:
 
 # Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa.core.in
-include $(LUFA_PATH)/Build/lufa.sources.in
-include $(LUFA_PATH)/Build/lufa.build.in
-include $(LUFA_PATH)/Build/lufa.doxygen.in
-include $(LUFA_PATH)/Build/lufa.dfu.in
-include $(LUFA_PATH)/Build/lufa.avrdude.in
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_dfu.mk
+include $(LUFA_PATH)/Build/lufa_hid.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/Projects/Webserver/Doxygen.conf b/Projects/Webserver/Doxygen.conf
index 3d431fd0..522a0551 100644
--- a/Projects/Webserver/Doxygen.conf
+++ b/Projects/Webserver/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.1
+# Doxyfile 1.8.1.2
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -588,7 +588,7 @@ FILE_VERSION_FILTER    =
 
 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
 # by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. The create the layout file
+# output files in an output format independent way. To create the layout file
 # that represents doxygen's defaults, run doxygen with the -l option.
 # You can optionally specify a file name after the option, if omitted
 # DoxygenLayout.xml will be used as the name of the layout file.
@@ -805,7 +805,7 @@ INLINE_SOURCES         = NO
 
 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
 # doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
+# fragments. Normal C, C++ and Fortran comments will always remain visible.
 
 STRIP_CODE_COMMENTS    = YES
 
@@ -957,9 +957,7 @@ HTML_TIMESTAMP         = NO
 
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
-# page has loaded. For this to work a browser that supports
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+# page has loaded.
 
 HTML_DYNAMIC_SECTIONS  = YES
 
diff --git a/Projects/Webserver/Lib/DataflashManager.h b/Projects/Webserver/Lib/DataflashManager.h
index af76f7f6..95a01194 100644
--- a/Projects/Webserver/Lib/DataflashManager.h
+++ b/Projects/Webserver/Lib/DataflashManager.h
@@ -51,7 +51,7 @@
 		#endif
 
 	/* Defines: */
-		/** Total number of bytes of the storage medium, comprised of one or more dataflash ICs. */
+		/** Total number of bytes of the storage medium, comprised of one or more Dataflash ICs. */
 		#define VIRTUAL_MEMORY_BYTES                ((uint32_t)DATAFLASH_PAGES * DATAFLASH_PAGE_SIZE * DATAFLASH_TOTALCHIPS)
 
 		/** Block size of the device. This is kept at 512 to remain compatible with the OS despite the underlying
diff --git a/Projects/Webserver/Lib/uip/uip.c b/Projects/Webserver/Lib/uip/uip.c
index 94171ada..dccefdd1 100644
--- a/Projects/Webserver/Lib/uip/uip.c
+++ b/Projects/Webserver/Lib/uip/uip.c
@@ -53,7 +53,7 @@
  * statement. While it would be possible to break the uip_process()
  * function into many smaller functions, this would increase the code
  * size because of the overhead of parameter passing and the fact that
- * the optimiser would not be as efficient.
+ * the optimizer would not be as efficient.
  *
  * The principle is that we have a small buffer, called the uip_buf,
  * in which the device driver puts an incoming packet. The TCP/IP
@@ -330,7 +330,7 @@ upper_layer_chksum(u8_t proto)
   upper_layer_len = (((u16_t)(BUF->len[0]) << 8) + BUF->len[1]) - UIP_IPH_LEN;
 #endif /* UIP_CONF_IPV6 */
 
-  /* First sum pseudoheader. */
+  /* First sum pseudo-header. */
 
   /* IP protocol and length fields. This addition cannot carry. */
   sum = upper_layer_len + proto;
diff --git a/Projects/Webserver/makefile b/Projects/Webserver/makefile
index 6ab89b57..28c66065 100644
--- a/Projects/Webserver/makefile
+++ b/Projects/Webserver/makefile
@@ -20,7 +20,7 @@ SRC          = $(TARGET).c Descriptors.c USBDeviceMode.c USBHostMode.c Lib/SCSI.
                Lib/uIPManagement.c Lib/DHCPCommon.c Lib/DHCPClientApp.c Lib/DHCPServerApp.c Lib/HTTPServerApp.c \
                Lib/TELNETServerApp.c Lib/uip/uip.c Lib/uip/uip_arp.c Lib/uip/timer.c Lib/uip/clock.c \
                Lib/uip/uip-split.c Lib/FATFs/diskio.c Lib/FATFs/ff.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH    = ../../LUFA/
+LUFA_PATH    = ../../LUFA
 CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -ILib/uip/ -ILib/FATFs/
 LD_FLAGS     =
 
@@ -28,9 +28,12 @@ LD_FLAGS     =
 all:
 
 # Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa.core.in
-include $(LUFA_PATH)/Build/lufa.sources.in
-include $(LUFA_PATH)/Build/lufa.build.in
-include $(LUFA_PATH)/Build/lufa.doxygen.in
-include $(LUFA_PATH)/Build/lufa.dfu.in
-include $(LUFA_PATH)/Build/lufa.avrdude.in
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_dfu.mk
+include $(LUFA_PATH)/Build/lufa_hid.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/Projects/XPLAINBridge/Doxygen.conf b/Projects/XPLAINBridge/Doxygen.conf
index 827d892c..7478e0ee 100644
--- a/Projects/XPLAINBridge/Doxygen.conf
+++ b/Projects/XPLAINBridge/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.1
+# Doxyfile 1.8.1.2
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -588,7 +588,7 @@ FILE_VERSION_FILTER    =
 
 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
 # by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. The create the layout file
+# output files in an output format independent way. To create the layout file
 # that represents doxygen's defaults, run doxygen with the -l option.
 # You can optionally specify a file name after the option, if omitted
 # DoxygenLayout.xml will be used as the name of the layout file.
@@ -804,7 +804,7 @@ INLINE_SOURCES         = NO
 
 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
 # doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
+# fragments. Normal C, C++ and Fortran comments will always remain visible.
 
 STRIP_CODE_COMMENTS    = YES
 
@@ -956,9 +956,7 @@ HTML_TIMESTAMP         = NO
 
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
-# page has loaded. For this to work a browser that supports
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+# page has loaded.
 
 HTML_DYNAMIC_SECTIONS  = YES
 
diff --git a/Projects/XPLAINBridge/LUFA XPLAIN Bridge.inf b/Projects/XPLAINBridge/LUFA XPLAIN Bridge.inf
index 99077836..0e3e7d9c 100644
--- a/Projects/XPLAINBridge/LUFA XPLAIN Bridge.inf
+++ b/Projects/XPLAINBridge/LUFA XPLAIN Bridge.inf
@@ -1,78 +1,36 @@
 ;************************************************************
 ; Windows USB CDC ACM Setup File
 ; Copyright (c) 2000 Microsoft Corporation
-
+;************************************************************
 
 [Version]
 Signature="$Windows NT$"
 Class=Ports
 ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
 Provider=%MFGNAME%
-LayoutFile=layout.inf
-CatalogFile=%MFGFILENAME%.cat
-DriverVer=11/15/2007,5.1.2600.0
+DriverVer=7/1/2012,10.0.0.0
 
 [Manufacturer]
-%MFGNAME%=DeviceList, NTamd64
-
-[DestinationDirs]
-DefaultDestDir=12
-
-
-;------------------------------------------------------------------------------
-;  Windows 2000/XP/Vista-32bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.nt]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.nt
-AddReg=DriverInstall.nt.AddReg
-
-[DriverCopyFiles.nt]
-usbser.sys,,,0x20
-
-[DriverInstall.nt.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64
 
-[DriverInstall.nt.Services]
-AddService=usbser, 0x00000002, DriverService.nt
-
-[DriverService.nt]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
-
-;------------------------------------------------------------------------------
-;  Vista-64bit Sections
-;------------------------------------------------------------------------------
-
-[DriverInstall.NTamd64]
-include=mdmcpq.inf
-CopyFiles=DriverCopyFiles.NTamd64
-AddReg=DriverInstall.NTamd64.AddReg
+[SourceDisksNames]
 
-[DriverCopyFiles.NTamd64]
-%DRIVERFILENAME%.sys,,,0x20
+[SourceDisksFiles]
 
-[DriverInstall.NTamd64.AddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,%DRIVERFILENAME%.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+[DestinationDirs]
+DefaultDestDir=12
 
-[DriverInstall.NTamd64.Services]
-AddService=usbser, 0x00000002, DriverService.NTamd64
+[DriverInstall]
+Include=mdmcpq.inf
+CopyFiles=FakeModemCopyFileSection
+AddReg=DriverInstall.AddReg
 
-[DriverService.NTamd64]
-DisplayName=%SERVICE%
-ServiceType=1
-StartType=3
-ErrorControl=1
-ServiceBinary=%12%\%DRIVERFILENAME%.sys
+[DriverInstall.Services]
+Include=mdmcpq.inf
+AddService=usbser, 0x00000002, LowerFilter_Service_Inst
 
+[DriverInstall.AddReg]
+HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider"
 
 ;------------------------------------------------------------------------------
 ;  Vendor and Product ID Definitions
@@ -83,14 +41,14 @@ ServiceBinary=%12%\%DRIVERFILENAME%.sys
 ; Note: One INF file can be used for multiple devices with different VID and PIDs.
 ; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line.
 ;------------------------------------------------------------------------------
-[SourceDisksFiles]
-[SourceDisksNames]
 [DeviceList]
 %DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204B
 
 [DeviceList.NTamd64]
 %DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204B
 
+[DeviceList.NTia64]
+%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204B
 
 ;------------------------------------------------------------------------------
 ;  String Definitions
@@ -98,9 +56,5 @@ ServiceBinary=%12%\%DRIVERFILENAME%.sys
 ;Modify these strings to customize your device
 ;------------------------------------------------------------------------------
 [Strings]
-MFGFILENAME="CDC_vista"
-DRIVERFILENAME ="usbser"
 MFGNAME="http://www.lufa-lib.org"
-INSTDISK="LUFA USB-RS232 CDC Driver Installer"
-DESCRIPTION="Communications Port"
-SERVICE="USB RS-232 Emulation Driver"
-\ No newline at end of file
+DESCRIPTION="LUFA XPLAIN Bridge"
+\ No newline at end of file
diff --git a/Projects/XPLAINBridge/makefile b/Projects/XPLAINBridge/makefile
index 76070544..33ac357e 100644
--- a/Projects/XPLAINBridge/makefile
+++ b/Projects/XPLAINBridge/makefile
@@ -9,7 +9,7 @@
 #         LUFA Project Makefile.
 # --------------------------------------
 
-AVRISP_PATH  = ../AVRISP-MKII/
+AVRISP_PATH  = ../AVRISP-MKII
 
 MCU          = at90usb1287
 ARCH         = AVR8
@@ -22,18 +22,28 @@ SRC          = $(TARGET).c Lib/SoftUART.c USARTDescriptors.c $(AVRISP_PATH)/AVRI
                $(AVRISP_PATH)/Lib/V2ProtocolParams.c $(AVRISP_PATH)/Lib/ISP/ISPProtocol.c $(AVRISP_PATH)/Lib/ISP/ISPTarget.c \
                $(AVRISP_PATH)/Lib/XPROG/XPROGProtocol.c $(AVRISP_PATH)/Lib/XPROG/XPROGTarget.c $(AVRISP_PATH)/Lib/XPROG/XMEGANVM.c \
                $(AVRISP_PATH)/Lib/XPROG/TINYNVM.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-
-LUFA_PATH    = ../../LUFA/
+LUFA_PATH    = ../../LUFA
 CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -I$(AVRISP_PATH)
 LD_FLAGS     =
 
 # Default target
 all:
 
+# Since this project borrows files from the AVRISP-MKII project which may also have an
+# identical OBJDIR directory, we need to enforce the use of this project's object file
+# directory as the one where the build object files are to be stored by pre-pending the
+# absolute path of the current project to the OBJDIR variable.
+ifneq ($(OBJDIR),)
+  override OBJDIR:=$(shell pwd)/$(OBJDIR)
+endif
+
 # Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa.core.in
-include $(LUFA_PATH)/Build/lufa.sources.in
-include $(LUFA_PATH)/Build/lufa.build.in
-include $(LUFA_PATH)/Build/lufa.doxygen.in
-include $(LUFA_PATH)/Build/lufa.dfu.in
-include $(LUFA_PATH)/Build/lufa.avrdude.in
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_dfu.mk
+include $(LUFA_PATH)/Build/lufa_hid.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/Projects/makefile b/Projects/makefile
index d507e76e..dd0ea2e8 100644
--- a/Projects/makefile
+++ b/Projects/makefile
@@ -13,35 +13,35 @@
 # custom LUFA library build options are reflected in the compiled
 # code.
 
-all:
-	$(MAKE) -s -C AVRISP-MKII clean all
-	$(MAKE) -s -C Benito clean all
-	$(MAKE) -s -C HIDReportViewer clean all
-	$(MAKE) -s -C LEDNotifier clean all
-	$(MAKE) -s -C Magstripe clean all
-	$(MAKE) -s -C MediaController clean all
-	$(MAKE) -s -C MIDIToneGenerator clean all
-	$(MAKE) -s -C MissileLauncher clean all
-	$(MAKE) -s -C RelayBoard clean all
-	$(MAKE) -s -C SerialToLCD clean all
-	$(MAKE) -s -C TempDataLogger clean all
-	$(MAKE) -s -C USBtoSerial clean all
-	$(MAKE) -s -C Webserver clean all
-	$(MAKE) -s -C XPLAINBridge clean all
-
-%:
-	$(MAKE) -s -C AVRISP-MKII $@
-	$(MAKE) -s -C Benito $@
-	$(MAKE) -s -C HIDReportViewer $@	
-	$(MAKE) -s -C LEDNotifier $@
-	$(MAKE) -s -C Magstripe $@
-	$(MAKE) -s -C MediaController $@
-	$(MAKE) -s -C MIDIToneGenerator $@	
-	$(MAKE) -s -C MissileLauncher $@
-	$(MAKE) -s -C RelayBoard $@
-	$(MAKE) -s -C SerialToLCD $@
-	$(MAKE) -s -C TempDataLogger $@
-	$(MAKE) -s -C USBtoSerial $@
-	$(MAKE) -s -C Webserver $@
-	$(MAKE) -s -C XPLAINBridge $@
+PROJECT_DIRECTORIES := $(shell ls -d */)
+
+# This makefile is potentially infinitely recursive if something really bad
+# happens when determining the set of project directories - hard-abort if
+# more than 10 levels deep to avoid angry emails.
+ifeq ($(MAKELEVEL), 10)
+   $(error EMERGENCY ABORT: INFINITE RECURSION DETECTED)
+endif
+
+# Need to special-case building without a per-project object directory
+ifeq ($(OBJDIR),)
+   # If no target specified, force "clean all" and disallow parallel build   
+   ifeq ($(MAKECMDGOALS),)
+      MAKECMDGOALS := clean all
+      .NOTPARALLEL:
+   endif
+
+   # If one of the targets is to build, force "clean" beforehand and disallow parallel build   
+   ifneq ($(findstring all, $(MAKECMDGOALS)),)
+      MAKECMDGOALS := clean $(MAKECMDGOALS)
+      .NOTPARALLEL:
+   endif
+endif
+
+%: $(PROJECT_DIRECTORIES)
+	@echo . > /dev/null
+
+$(PROJECT_DIRECTORIES):
+	@$(MAKE) -C $@ $(MAKECMDGOALS)
+    
+.PHONY: $(PROJECT_DIRECTORIES)
author	Dean <Dean@d5102386-fcda-11dd-9fdb-3debd5008f28>	2012-07-30 17:17:40 +0000
committer	Dean <Dean@d5102386-fcda-11dd-9fdb-3debd5008f28>	2012-07-30 17:17:40 +0000
commit	9b57f660aeb9f8b94893d546d703b95928cb3640 (patch)
tree	bf545cc06c1f18a9eaf5927ab1f42c4059ff83f4 /Projects
parent	a0a30d5afb506b55655de244f1c7f6b1857279d8 (diff)