Software PDI mode breaks unless the software USART has 100 cycles between bits.

git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1168 d5102386-fcda-11dd-9fdb-3debd5008f28

5 files changed, 14 insertions, 13 deletions

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
index a894793c..c0f04c6b 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
@@ -65,7 +65,7 @@ static void TINYNVM_SendReadNVMRegister(const uint8_t Address)
  */

 static void TINYNVM_SendWriteNVMRegister(const uint8_t Address)

 {

-	/* The TPI command for writing to the I/O space uses weird addressing, where the I/O address's upper

+	/* The TPI command for reading from the I/O space uses strange addressing, where the I/O address's upper

 	 * two bits of the 6-bit address are shifted left once */

 	XPROGTarget_SendByte(TPI_CMD_SOUT | ((Address & 0x30) << 1) | (Address & 0x0F));

 }

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
index 08936a20..07dce501 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
@@ -175,10 +175,6 @@ static void XPROGProtocol_LeaveXPROGMode(void)
 		/* Clear the RESET key in the RESET PDI register to allow the XMEGA to run */

 		XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);	

 		XPROGTarget_SendByte(0x00);

-		

-		/* Clear /RESET key twice (for some reason this needs to be done twice to take effect) */

-		XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);	

-		XPROGTarget_SendByte(0x00);

 

 		XPROGTarget_DisableTargetPDI();

 	}

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
index 3a74e153..15467fe8 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
@@ -162,7 +162,7 @@ void XPROGTarget_EnableTargetPDI(void)
 	

 	/* Set up the synchronous USART for XMEGA communications - 

 	   8 data bits, even parity, 2 stop bits */

-	UBRR1  = (F_CPU / 500000UL);

+	UBRR1  = (F_CPU / XPROG_HARDWARE_SPEED);

 	UCSR1B = (1 << TXEN1);

 	UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);

 #else

@@ -203,7 +203,7 @@ void XPROGTarget_EnableTargetTPI(void)
 		

 	/* Set up the synchronous USART for TINY communications - 

 	   8 data bits, even parity, 2 stop bits */

-	UBRR1  = (F_CPU / 500000UL);

+	UBRR1  = (F_CPU / XPROG_HARDWARE_SPEED);

 	UCSR1B = (1 << TXEN1);

 	UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);

 #else

@@ -239,16 +239,18 @@ void XPROGTarget_DisableTargetPDI(void)
 

 	/* Tristate all pins */

 	DDRD  &= ~((1 << 5) | (1 << 3));

-	PORTD &= ~((1 << 3) | (1 << 2));

+	PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2));

 #else

 	/* Turn off software USART management timer */

 	TCCR1B = 0;

 

-	/* Tristate all pins */

+	/* Set DATA and CLOCK lines to inputs */

 	BITBANG_PDIDATA_DDR   &= ~BITBANG_PDIDATA_MASK;

 	BITBANG_PDICLOCK_DDR  &= ~BITBANG_PDICLOCK_MASK;

-	BITBANG_PDICLOCK_PORT &= ~BITBANG_PDICLOCK_MASK;	

+	

+	/* Tristate DATA and CLOCK lines */

 	BITBANG_PDIDATA_PORT  &= ~BITBANG_PDIDATA_MASK;

+	BITBANG_PDICLOCK_PORT &= ~BITBANG_PDICLOCK_MASK;	

 #endif

 }

 

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h
index 0c54ad4c..7166c102 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h
@@ -58,7 +58,7 @@
 	/* Defines: */

 		#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))

 			#define XPROG_VIA_HARDWARE_USART

-		#else

+		#else		

 			#define BITBANG_PDIDATA_PORT     PORTB

 			#define BITBANG_PDIDATA_DDR      DDRB

 			#define BITBANG_PDIDATA_PIN      PINB

@@ -80,8 +80,11 @@
 			#define BITBANG_TPICLOCK_MASK    (1 << 1)

 		#endif

 		

+		/** Serial carrier TPI/PDI speed when hardware TPI/PDI mode is used */

+		#define XPROG_HARDWARE_SPEED       500000

+

 		/** Number of cycles between each clock when software USART mode is used */

-		#define BITS_BETWEEN_USART_CLOCKS  80

+		#define BITS_BETWEEN_USART_CLOCKS  100

 		

 		/** Total number of bits in a single USART frame */

 		#define BITS_IN_USART_FRAME        12

diff --git a/Projects/AVRISP-MKII/makefile b/Projects/AVRISP-MKII/makefile
index b2c139ce..b0b26c24 100644
--- a/Projects/AVRISP-MKII/makefile
+++ b/Projects/AVRISP-MKII/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

-BOARD = XPLAIN

+BOARD = USBKEY

 

 

 # Processor frequency.