diff options
Diffstat (limited to 'BuildTests')
26 files changed, 902 insertions, 6475 deletions
diff --git a/BuildTests/BoardDriverTest/BoardDeviceMap.cfg b/BuildTests/BoardDriverTest/BoardDeviceMap.cfg index 5ef6db23..5d15f344 100644 --- a/BuildTests/BoardDriverTest/BoardDeviceMap.cfg +++ b/BuildTests/BoardDriverTest/BoardDeviceMap.cfg @@ -1,73 +1,74 @@ -#
-# LUFA Library
-# Copyright (C) Dean Camera, 2012.
-#
-# dean [at] fourwalledcubicle [dot] com
-# www.lufa-lib.org
-#
-#
-# =============================================================================
-# Board configuration map script, processed with the "BoardDriverTest"
-# makefile. This script file maps the possible LUFA target BOARD makefile
-# value in user projects to a specific architecture and device. This mapping is
-# then used by the makefile to build all possible drivers for that board, to
-# detect any missing or erroneous functions. To add a new board mapping, use
-# the syntax:
-#
-# BOARD DEFINE = {ARCH} : {MCU} :
-#
-# And re-run the makefile. Note that each board may have only one target.
-# =============================================================================
-#
-#
-BOARD_USER = avr8 : at90usb1287 :
-BOARD_NONE = avr8 : at90usb1287 :
-BOARD_USBKEY = avr8 : at90usb1287 :
-BOARD_STK525 = avr8 : at90usb647 :
-BOARD_STK526 = avr8 : at90usb162 :
-BOARD_RZUSBSTICK = avr8 : at90usb1287 :
-BOARD_ATAVRUSBRF01 = avr8 : at90usb1287 :
-BOARD_BUMBLEB = avr8 : at90usb162 :
-BOARD_XPLAIN = avr8 : at90usb1287 :
-BOARD_XPLAIN_REV1 = avr8 : at90usb1287 :
-BOARD_EVK527 = avr8 : atmega32u4 :
-BOARD_TEENSY = avr8 : at90usb162 :
-BOARD_USBTINYMKII = avr8 : at90usb162 :
-BOARD_BENITO = avr8 : at90usb162 :
-BOARD_JMDBU2 = avr8 : atmega32u2 :
-BOARD_OLIMEX162 = avr8 : at90usb162 :
-BOARD_UDIP = avr8 : atmega32u2 :
-BOARD_BUI = avr8 : at90usb646 :
-BOARD_UNO = avr8 : atmega8u2 :
-BOARD_CULV3 = avr8 : atmega32u4 :
-BOARD_BLACKCAT = avr8 : at90usb162 :
-BOARD_MAXIMUS = avr8 : at90usb162 :
-BOARD_MINIMUS = avr8 : atmega32u2 :
-BOARD_ADAFRUITU4 = avr8 : atmega32u4 :
-BOARD_MICROSIN162 = avr8 : atmega162 :
-BOARD_USBFOO = avr8 : atmega162 :
-BOARD_SPARKFUN8U2 = avr8 : atmega8u2 :
-BOARD_EVK1101 = uc3 : uc3b0256 :
-BOARD_TUL = avr8 : atmega32u4 :
-BOARD_EVK1100 = uc3 : uc3a0512 :
-BOARD_EVK1104 = uc3 : uc3a3256 :
-BOARD_A3BU_XPLAINED = xmega : atxmega256a3bu :
-BOARD_TEENSY2 = avr8 : at90usb646 :
-BOARD_USB2AX = avr8 : atmega32u4 :
-BOARD_USB2AX_V3 = avr8 : atmega32u4 :
-BOARD_MICROPENDOUS_32U2 = avr8 : atmega32u2 :
-BOARD_MICROPENDOUS_A = avr8 : at90usb1287 :
-BOARD_MICROPENDOUS_1 = avr8 : at90usb162 :
-BOARD_MICROPENDOUS_2 = avr8 : atmega32u4 :
-BOARD_MICROPENDOUS_3 = avr8 : at90usb1287 :
-BOARD_MICROPENDOUS_4 = avr8 : at90usb1287 :
-BOARD_MICROPENDOUS_DIP = avr8 : at90usb1287 :
-BOARD_MICROPENDOUS_REV1 = avr8 : at90usb1287 :
-BOARD_MICROPENDOUS_REV2 = avr8 : at90usb1287 :
-BOARD_B1_XPLAINED = xmega : atxmega128b1 :
-BOARD_MULTIO = avr8 : at90usb162 :
-BOARD_BIGMULTIO = avr8 : atmega32u4 :
-BOARD_DUCE = avr8 : atmega32u2 :
-BOARD_OLIMEX32U4 = avr8 : atmega32u4 :
-BOARD_OLIMEXT32U4 = avr8 : atmega32u4 :
+# +# LUFA Library +# Copyright (C) Dean Camera, 2012. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# +# +# ============================================================================= +# Board configuration map script, processed with the "BoardDriverTest" +# makefile. This script file maps the possible LUFA target BOARD makefile +# value in user projects to a specific architecture and device. This mapping is +# then used by the makefile to build all possible drivers for that board, to +# detect any missing or erroneous functions. To add a new board mapping, use +# the syntax: +# +# BOARD DEFINE = {ARCH} : {MCU} : +# +# And re-run the makefile. Note that each board may have only one target. +# ============================================================================= +# +# +BOARD_USER = AVR8 : at90usb1287 : +BOARD_NONE = AVR8 : at90usb1287 : +BOARD_USBKEY = AVR8 : at90usb1287 : +BOARD_STK525 = AVR8 : at90usb647 : +BOARD_STK526 = AVR8 : at90usb162 : +BOARD_RZUSBSTICK = AVR8 : at90usb1287 : +BOARD_ATAVRUSBRF01 = AVR8 : at90usb1287 : +BOARD_BUMBLEB = AVR8 : at90usb162 : +BOARD_XPLAIN = AVR8 : at90usb1287 : +BOARD_XPLAIN_REV1 = AVR8 : at90usb1287 : +BOARD_EVK527 = AVR8 : atmega32u4 : +BOARD_TEENSY = AVR8 : at90usb162 : +BOARD_USBTINYMKII = AVR8 : at90usb162 : +BOARD_BENITO = AVR8 : at90usb162 : +BOARD_JMDBU2 = AVR8 : atmega32u2 : +BOARD_OLIMEX162 = AVR8 : at90usb162 : +BOARD_UDIP = AVR8 : atmega32u2 : +BOARD_BUI = AVR8 : at90usb646 : +BOARD_UNO = AVR8 : atmega8u2 : +BOARD_CULV3 = AVR8 : atmega32u4 : +BOARD_BLACKCAT = AVR8 : at90usb162 : +BOARD_MAXIMUS = AVR8 : at90usb162 : +BOARD_MINIMUS = AVR8 : atmega32u2 : +BOARD_ADAFRUITU4 = AVR8 : atmega32u4 : +BOARD_MICROSIN162 = AVR8 : atmega162 : +BOARD_USBFOO = AVR8 : atmega162 : +BOARD_SPARKFUN8U2 = AVR8 : atmega8u2 : +BOARD_EVK1101 = UC3 : uc3b0256 : +BOARD_TUL = AVR8 : atmega32u4 : +BOARD_EVK1100 = UC3 : uc3a0512 : +BOARD_EVK1104 = UC3 : uc3a3256 : +BOARD_A3BU_XPLAINED = XMEGA : atxmega256a3bu : +BOARD_TEENSY2 = AVR8 : at90usb646 : +BOARD_USB2AX = AVR8 : atmega32u4 : +BOARD_USB2AX_V3 = AVR8 : atmega32u4 : +BOARD_MICROPENDOUS_32U2 = AVR8 : atmega32u2 : +BOARD_MICROPENDOUS_A = AVR8 : at90usb1287 : +BOARD_MICROPENDOUS_1 = AVR8 : at90usb162 : +BOARD_MICROPENDOUS_2 = AVR8 : atmega32u4 : +BOARD_MICROPENDOUS_3 = AVR8 : at90usb1287 : +BOARD_MICROPENDOUS_4 = AVR8 : at90usb1287 : +BOARD_MICROPENDOUS_DIP = AVR8 : at90usb1287 : +BOARD_MICROPENDOUS_REV1 = AVR8 : at90usb1287 : +BOARD_MICROPENDOUS_REV2 = AVR8 : at90usb1287 : +BOARD_B1_XPLAINED = XMEGA : atxmega128b1 : +BOARD_MULTIO = AVR8 : at90usb162 : +BOARD_BIGMULTIO = AVR8 : atmega32u4 : +BOARD_DUCE = AVR8 : atmega32u2 : +BOARD_OLIMEX32U4 = AVR8 : atmega32u4 : +BOARD_OLIMEXT32U4 = AVR8 : atmega32u4 : +BOARD_OLIMEXISPMK2 = AVR8 : at90usb162 : #
\ No newline at end of file diff --git a/BuildTests/BoardDriverTest/makefile b/BuildTests/BoardDriverTest/makefile index cb1ed62b..c46a00c0 100644 --- a/BuildTests/BoardDriverTest/makefile +++ b/BuildTests/BoardDriverTest/makefile @@ -1,63 +1,68 @@ -#
-# LUFA Library
-# Copyright (C) Dean Camera, 2012.
-#
-# dean [at] fourwalledcubicle [dot] com
-# www.lufa-lib.org
-#
-
-# Makefile for the board driver build test. This
-# test attempts to build a dummy project with all
-# possible board targets using their respective
-# compiler.
-
-# Path to the root of the LUFA tree to scan
-LUFA_ROOT_PATH = ../..
-
-
-all: begin makeboardlist testboards clean end
-
-begin:
- @echo Executing build test "BoardDriverTest".
- @echo
-
-end:
- @echo Build test "BoardDriverTest" complete.
- @echo
-
-makeboardlist:
- @grep "BOARD_" $(LUFA_ROOT_PATH)/LUFA/Common/BoardTypes.h | cut -d'#' -f2 | cut -d' ' -f2 | grep "BOARD_" > BoardList.txt
-
-testboards:
- @echo "buildtest:" > BuildMakefile
-
- @while read line; \
- do \
- build_cfg=`grep "$$line " BoardDeviceMap.cfg | grep -v "#" | cut -d'=' -f2- | sed 's/ //g'`; \
- \
- build_board=$$line; \
- build_arch=`echo $$build_cfg | cut -d':' -f1`; \
- build_mcu=`echo $$build_cfg | cut -d':' -f2`; \
- \
- if ( test -z "$$build_cfg" ); then \
- echo "No matching information set for board $$build_board"; \
- else \
- echo "Found board configuration for $$build_board - $$build_arch, $$build_mcu"; \
- \
- printf "\t@echo Building dummy project for $$build_board...\n" >> BuildMakefile; \
- printf "\tmake -s -f makefile.%s clean\n" $$build_arch >> BuildMakefile; \
- printf "\tmake -s -f makefile.%s MCU=%s BOARD=%s elf\n\n" $$build_arch $$build_mcu $$build_board >> BuildMakefile; \
- fi; \
- done < BoardList.txt
-
- $(MAKE) -f BuildMakefile buildtest
-
-clean:
- rm -f BuildMakefile
- rm -f BoardList.txt
- $(MAKE) -f makefile.avr8 clean
- $(MAKE) -f makefile.xmega clean
- $(MAKE) -f makefile.uc3 clean
-
-%:
-
\ No newline at end of file +# +# LUFA Library +# Copyright (C) Dean Camera, 2012. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# + +# Makefile for the board driver build test. This +# test attempts to build a dummy project with all +# possible board targets using their respective +# compiler. + +# Path to the LUFA library core +LUFA_PATH := ../../LUFA/ + +# Build test cannot be run with multiple parallel jobs +.NOTPARALLEL: + +all: begin makeboardlist testboards clean end + +begin: + @echo Executing build test "BoardDriverTest". + @echo + +end: + @echo Build test "BoardDriverTest" complete. + @echo + +makeboardlist: + @grep "BOARD_" $(patsubst %/,%,$(LUFA_PATH))/Common/BoardTypes.h | cut -d'#' -f2 | cut -d' ' -f2 | grep "BOARD_" > BoardList.txt + +testboards: + @echo "buildtest:" > BuildMakefile + + @while read line; \ + do \ + build_cfg=`grep "$$line " BoardDeviceMap.cfg | grep -v "#" | cut -d'=' -f2- | sed 's/ //g'`; \ + \ + build_board=$$line; \ + build_arch=`echo $$build_cfg | cut -d':' -f1`; \ + build_mcu=`echo $$build_cfg | cut -d':' -f2`; \ + \ + if ( test -z "$$build_cfg" ); then \ + echo "No matching information set for board $$build_board"; \ + else \ + echo "Found board configuration for $$build_board - $$build_arch, $$build_mcu"; \ + \ + printf "\t@echo Building dummy project for $$build_board...\n" >> BuildMakefile; \ + printf "\t$(MAKE) -f makefile.test clean elf MCU=%s ARCH=%s BOARD=%s\n\n" $$build_mcu $$build_arch $$build_board >> BuildMakefile; \ + fi; \ + done < BoardList.txt + + $(MAKE) -f BuildMakefile buildtest + +clean: + rm -f BuildMakefile + rm -f BoardList.txt + $(MAKE) -f makefile.test clean BOARD=NONE ARCH=AVR8 MCU=at90usb1287 + $(MAKE) -f makefile.test clean BOARD=NONE ARCH=XMEGA MCU=atxmega128a1u + $(MAKE) -f makefile.test clean BOARD=NONE ARCH=UC3 MCU=uc3a0256 + +%: + +.PHONY: all begin end makeboardlist testboards clean + +# Include LUFA build script makefiles +include $(LUFA_PATH)/Build/lufa_core.mk diff --git a/BuildTests/BoardDriverTest/makefile.avr8 b/BuildTests/BoardDriverTest/makefile.avr8 deleted file mode 100644 index 8840cee8..00000000 --- a/BuildTests/BoardDriverTest/makefile.avr8 +++ /dev/null @@ -1,723 +0,0 @@ -# Hey Emacs, this is a -*- makefile -*-
-#----------------------------------------------------------------------------
-# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
-# >> Modified for use with the LUFA project. <<
-#
-# Released to the Public Domain
-#
-# Additional material for this makefile was written by:
-# Peter Fleury
-# Tim Henigan
-# Colin O'Flynn
-# Reiner Patommel
-# Markus Pfaff
-# Sander Pool
-# Frederik Rouleau
-# Carlos Lamas
-# Dean Camera
-# Opendous Inc.
-# Denver Gingerich
-#
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device, using avrdude.
-# Please customize the avrdude settings below first!
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-# (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-# (must have Atmel FLIP installed).
-#
-# make doxygen = Generate DoxyGen documentation for the project (must have
-# DoxyGen installed)
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-# with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-
-# MCU name
-MCU = at90usb1287
-
-
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-
-# Target board (see library "Board Types" documentation, NONE for projects not requiring
-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
-# "Board" inside the application directory.
-BOARD = NONE
-
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-
-# Output format. (can be srec, ihex, binary)
-FORMAT = ihex
-
-
-# Target file name (without extension).
-TARGET = Test
-
-
-# Object files directory
-# To put object files in current directory, use a dot (.), do NOT make
-# this an empty or blank macro!
-OBJDIR = .
-
-
-# Path to the LUFA library
-LUFA_PATH = ../..
-
-
-# LUFA library compile-time options and predefined tokens
-LUFA_OPTS =
-
-
-# Create the LUFA source path variables by including the LUFA root makefile
-include $(LUFA_PATH)/LUFA/makefile
-
-
-# List C source files here. (C dependencies are automatically generated.)
-SRC = Test.c
-
-
-
-# List C++ source files here. (C dependencies are automatically generated.)
-CPPSRC =
-
-
-# List Assembler source files here.
-# Make them always end in a capital .S. Files ending in a lowercase .s
-# will not be considered source files but generated files (assembler
-# output from the compiler), and will be deleted upon "make clean"!
-# Even though the DOS/Win* filesystem matches both .s and .S the same,
-# it will preserve the spelling of the filenames, and gcc itself does
-# care about how the name is spelled on its command-line.
-ASRC =
-
-
-# Optimization level, can be [0, 1, 2, 3, s].
-# 0 = turn off optimization. s = optimize for size.
-# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPT = 1
-
-
-# Debugging format.
-# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
-# AVR Studio 4.10 requires dwarf-2.
-# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
-DEBUG = dwarf-2
-
-
-# List any extra directories to look for include files here.
-# Each directory must be seperated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
-
-
-# Compiler flag to set the C Standard level.
-# c89 = "ANSI" C
-# gnu89 = c89 plus GCC extensions
-# c99 = ISO C99 standard (not yet fully implemented)
-# gnu99 = c99 plus GCC extensions
-CSTANDARD = -std=c99
-
-
-# Place -D or -U options here for C sources
-CDEFS = -DF_CPU=$(F_CPU)UL
-CDEFS += -DF_USB=$(F_USB)UL
-CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
-CDEFS += $(LUFA_OPTS)
-
-
-# Place -D or -U options here for ASM sources
-ADEFS = -DF_CPU=$(F_CPU)
-ADEFS += -DF_USB=$(F_USB)UL
-ADEFS += -DBOARD=BOARD_$(BOARD)
-ADEFS += $(LUFA_OPTS)
-
-# Place -D or -U options here for C++ sources
-CPPDEFS = -DF_CPU=$(F_CPU)UL
-CPPDEFS += -DF_USB=$(F_USB)UL
-CPPDEFS += -DBOARD=BOARD_$(BOARD)
-CPPDEFS += $(LUFA_OPTS)
-#CPPDEFS += -D__STDC_LIMIT_MACROS
-#CPPDEFS += -D__STDC_CONSTANT_MACROS
-
-
-
-#---------------- Compiler Options C ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CFLAGS = -g$(DEBUG)
-CFLAGS += $(CDEFS)
-CFLAGS += -O$(OPT)
-CFLAGS += -funsigned-char
-CFLAGS += -funsigned-bitfields
-CFLAGS += -ffunction-sections
-CFLAGS += -fno-inline-small-functions
-CFLAGS += -fpack-struct
-CFLAGS += -fshort-enums
-CFLAGS += -fno-strict-aliasing
-CFLAGS += -fno-split-wide-types
-CFLAGS += -Wall
-CFLAGS += -Wstrict-prototypes
-#CFLAGS += -mshort-calls
-#CFLAGS += -fno-unit-at-a-time
-#CFLAGS += -Wundef
-#CFLAGS += -Wunreachable-code
-#CFLAGS += -Wsign-compare
-#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-CFLAGS += $(CSTANDARD)
-
-
-#---------------- Compiler Options C++ ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CPPFLAGS = -g$(DEBUG)
-CPPFLAGS += $(CPPDEFS)
-CPPFLAGS += -O$(OPT)
-CPPFLAGS += -funsigned-char
-CPPFLAGS += -funsigned-bitfields
-CPPFLAGS += -fpack-struct
-CPPFLAGS += -fshort-enums
-CPPFLAGS += -fno-exceptions
-CPPFLAGS += -Wall
-CPPFLAGS += -Wundef
-#CPPFLAGS += -mshort-calls
-#CPPFLAGS += -fno-unit-at-a-time
-#CPPFLAGS += -Wstrict-prototypes
-#CPPFLAGS += -Wunreachable-code
-#CPPFLAGS += -Wsign-compare
-#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
-CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-#CPPFLAGS += $(CSTANDARD)
-
-
-#---------------- Assembler Options ----------------
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns: create listing
-# -gstabs: have the assembler create line number information; note that
-# for use in COFF files, additional information about filenames
-# and function names needs to be present in the assembler source
-# files -- see avr-libc docs [FIXME: not yet described there]
-# -listing-cont-lines: Sets the maximum number of continuation lines of hex
-# dump that will be displayed for a given single line of source input.
-ASFLAGS = $(ADEFS)
-#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
-
-
-#---------------- Library Options ----------------
-# Minimalistic printf version
-PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
-
-# Floating point printf version (requires MATH_LIB = -lm below)
-PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
-
-# If this is left blank, then it will use the Standard printf version.
-PRINTF_LIB =
-#PRINTF_LIB = $(PRINTF_LIB_MIN)
-#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
-
-
-# Minimalistic scanf version
-SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
-
-# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
-SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
-
-# If this is left blank, then it will use the Standard scanf version.
-SCANF_LIB =
-#SCANF_LIB = $(SCANF_LIB_MIN)
-#SCANF_LIB = $(SCANF_LIB_FLOAT)
-
-
-MATH_LIB = -lm
-
-
-# List any extra directories to look for libraries here.
-# Each directory must be seperated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRALIBDIRS =
-
-
-
-#---------------- External Memory Options ----------------
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# used for variables (.data/.bss) and heap (malloc()).
-#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# only used for heap (malloc()).
-#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
-
-EXTMEMOPTS =
-
-
-
-#---------------- Linker Options ----------------
-# -Wl,...: tell GCC to pass this to linker.
-# -Map: create map file
-# --cref: add cross reference to map file
-#LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
-LDFLAGS += -Wl,--relax
-LDFLAGS += -Wl,--gc-sections
-LDFLAGS += $(EXTMEMOPTS)
-LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
-LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
-#LDFLAGS += -T linker_script.x
-
-
-
-#---------------- Programming Options (avrdude) ----------------
-
-# Programming hardware
-# Type: avrdude -c ?
-# to get a full listing.
-#
-AVRDUDE_PROGRAMMER = jtagmkII
-
-# com1 = serial port. Use lpt1 to connect to parallel port.
-AVRDUDE_PORT = usb
-
-AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
-
-
-# Uncomment the following if you want avrdude's erase cycle counter.
-# Note that this counter needs to be initialized first using -Yn,
-# see avrdude manual.
-#AVRDUDE_ERASE_COUNTER = -y
-
-# Uncomment the following if you do /not/ wish a verification to be
-# performed after programming the device.
-#AVRDUDE_NO_VERIFY = -V
-
-# Increase verbosity level. Please use this when submitting bug
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
-# to submit bug reports.
-#AVRDUDE_VERBOSE = -v -v
-
-AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
-
-
-
-#---------------- Debugging Options ----------------
-
-# For simulavr only - target MCU frequency.
-DEBUG_MFREQ = $(F_CPU)
-
-# Set the DEBUG_UI to either gdb or insight.
-# DEBUG_UI = gdb
-DEBUG_UI = insight
-
-# Set the debugging back-end to either avarice, simulavr.
-DEBUG_BACKEND = avarice
-#DEBUG_BACKEND = simulavr
-
-# GDB Init Filename.
-GDBINIT_FILE = __avr_gdbinit
-
-# When using avarice settings for the JTAG
-JTAG_DEV = /dev/com1
-
-# Debugging port used to communicate between GDB / avarice / simulavr.
-DEBUG_PORT = 4242
-
-# Debugging host used to communicate between GDB / avarice / simulavr, normally
-# just set to localhost unless doing some sort of crazy debugging when
-# avarice is running on a different computer.
-DEBUG_HOST = localhost
-
-
-
-#============================================================================
-
-
-# Define programs and commands.
-SHELL = sh
-CC = avr-gcc
-OBJCOPY = avr-objcopy
-OBJDUMP = avr-objdump
-SIZE = avr-size
-AR = avr-ar rcs
-NM = avr-nm
-AVRDUDE = avrdude
-REMOVE = rm -f
-REMOVEDIR = rm -rf
-COPY = cp
-WINSHELL = cmd
-
-
-# Define Messages
-# English
-MSG_ERRORS_NONE = Errors: none
-MSG_BEGIN = -------- begin --------
-MSG_END = -------- end --------
-MSG_SIZE_BEFORE = Size before:
-MSG_SIZE_AFTER = Size after:
-MSG_COFF = Converting to AVR COFF:
-MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
-MSG_FLASH = Creating load file for Flash:
-MSG_EEPROM = Creating load file for EEPROM:
-MSG_EXTENDED_LISTING = Creating Extended Listing:
-MSG_SYMBOL_TABLE = Creating Symbol Table:
-MSG_LINKING = Linking:
-MSG_COMPILING = Compiling C:
-MSG_COMPILING_CPP = Compiling C++:
-MSG_ASSEMBLING = Assembling:
-MSG_CLEANING = Cleaning project:
-MSG_CREATING_LIBRARY = Creating library:
-
-
-
-
-# Define all object files.
-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
-
-# Define all listing files.
-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
-
-
-# Compiler flags to generate dependency files.
-#GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
-
-
-# Combine all necessary flags and optional flags.
-# Add target processor to flags.
-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
-ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
-
-
-
-
-
-# Default target.
-all: begin gccversion sizebefore build sizeafter end
-
-# Change the build target to build a HEX file or a library.
-build: elf hex eep lss sym
-#build: lib
-
-
-elf: $(TARGET).elf
-hex: $(TARGET).hex
-eep: $(TARGET).eep
-lss: $(TARGET).lss
-sym: $(TARGET).sym
-LIBNAME=lib$(TARGET).a
-lib: $(LIBNAME)
-
-
-
-# Eye candy.
-# AVR Studio 3.x does not check make's exit code but relies on
-# the following magic strings to be generated by the compile job.
-begin:
- @echo
- @echo $(MSG_BEGIN)
-
-end:
- @echo $(MSG_END)
- @echo
-
-
-# Display size of file.
-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
-ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
-MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
-FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
-
-
-sizebefore:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-sizeafter:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-
-
-# Display compiler version information.
-gccversion :
- @$(CC) --version
-
-
-# Program the device.
-program: $(TARGET).hex $(TARGET).eep
- $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- $(COPY) $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
- $(REMOVE) $(TARGET)eep.hex
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) eeprom-flash $(TARGET).eep
- dfu-programmer $(MCU) reset
-
-
-# Generate avr-gdb config/init file which does the following:
-# define the reset signal, load the target file, connect to target, and set
-# a breakpoint at main().
-gdb-config:
- @$(REMOVE) $(GDBINIT_FILE)
- @echo define reset >> $(GDBINIT_FILE)
- @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
- @echo end >> $(GDBINIT_FILE)
- @echo file $(TARGET).elf >> $(GDBINIT_FILE)
- @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
-ifeq ($(DEBUG_BACKEND),simulavr)
- @echo load >> $(GDBINIT_FILE)
-endif
- @echo break main >> $(GDBINIT_FILE)
-
-debug: gdb-config $(TARGET).elf
-ifeq ($(DEBUG_BACKEND), avarice)
- @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
- @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
- $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
- @$(WINSHELL) /c pause
-
-else
- @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
- $(DEBUG_MFREQ) --port $(DEBUG_PORT)
-endif
- @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
-
-
-
-
-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
-COFFCONVERT = $(OBJCOPY) --debugging
-COFFCONVERT += --change-section-address .data-0x800000
-COFFCONVERT += --change-section-address .bss-0x800000
-COFFCONVERT += --change-section-address .noinit-0x800000
-COFFCONVERT += --change-section-address .eeprom-0x810000
-
-
-
-coff: $(TARGET).elf
- @echo
- @echo $(MSG_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
-
-
-extcoff: $(TARGET).elf
- @echo
- @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
-
-
-
-# Create final output files (.hex, .eep) from ELF output file.
-%.hex: %.elf
- @echo
- @echo $(MSG_FLASH) $@
- $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@
-
-%.eep: %.elf
- @echo
- @echo $(MSG_EEPROM) $@
- -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
- --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
-
-# Create extended listing file from ELF output file.
-%.lss: %.elf
- @echo
- @echo $(MSG_EXTENDED_LISTING) $@
- $(OBJDUMP) -h -S -z $< > $@
-
-# Create a symbol table from ELF output file.
-%.sym: %.elf
- @echo
- @echo $(MSG_SYMBOL_TABLE) $@
- $(NM) -n $< > $@
-
-
-
-# Create library from object files.
-.SECONDARY : $(TARGET).a
-.PRECIOUS : $(OBJ)
-%.a: $(OBJ)
- @echo
- @echo $(MSG_CREATING_LIBRARY) $@
- $(AR) $@ $(OBJ)
-
-
-# Link: create ELF output file from object files.
-.SECONDARY : $(TARGET).elf
-.PRECIOUS : $(OBJ)
-%.elf: $(OBJ)
- @echo
- @echo $(MSG_LINKING) $@
- $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
-
-
-# Compile: create object files from C source files.
-$(OBJDIR)/%.o : %.c
- @echo
- @echo $(MSG_COMPILING) $<
- $(CC) -c $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create object files from C++ source files.
-$(OBJDIR)/%.o : %.cpp
- @echo
- @echo $(MSG_COMPILING_CPP) $<
- $(CC) -c $(ALL_CPPFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C source files.
-%.s : %.c
- $(CC) -S $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C++ source files.
-%.s : %.cpp
- $(CC) -S $(ALL_CPPFLAGS) $< -o $@
-
-
-# Assemble: create object files from assembler source files.
-$(OBJDIR)/%.o : %.S
- @echo
- @echo $(MSG_ASSEMBLING) $<
- $(CC) -c $(ALL_ASFLAGS) $< -o $@
-
-
-# Create preprocessed source for use in sending a bug report.
-%.i : %.c
- $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
-
-
-# Target: clean project.
-clean: begin clean_list end
-
-clean_list :
- @echo
- @echo $(MSG_CLEANING)
- $(REMOVE) $(TARGET).hex
- $(REMOVE) $(TARGET).eep
- $(REMOVE) $(TARGET).cof
- $(REMOVE) $(TARGET).elf
- $(REMOVE) $(TARGET).map
- $(REMOVE) $(TARGET).sym
- $(REMOVE) $(TARGET).lss
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
- $(REMOVE) $(SRC:.c=.s)
- $(REMOVE) $(SRC:.c=.d)
- $(REMOVE) $(SRC:.c=.i)
- $(REMOVEDIR) .dep
-
-doxygen:
- @echo Generating Project Documentation \($(TARGET)\)...
- @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
- exit 1; \
- fi;
- @echo Documentation Generation Complete.
-
-clean_doxygen:
- rm -rf Documentation
-
-checksource:
- @for f in $(SRC) $(CPPSRC) $(ASRC); do \
- if [ -f $$f ]; then \
- echo "Found Source File: $$f" ; \
- else \
- echo "Source File Not Found: $$f" ; \
- fi; done
-
-
-# Create object files directory
-$(shell mkdir $(OBJDIR) 2>/dev/null)
-
-
-# Include the dependency files.
--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
-
-
-# Listing of phony targets.
-.PHONY : all begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff doxygen clean \
-clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
-debug gdb-config checksource
diff --git a/BuildTests/BoardDriverTest/makefile.test b/BuildTests/BoardDriverTest/makefile.test new file mode 100644 index 00000000..234add1a --- /dev/null +++ b/BuildTests/BoardDriverTest/makefile.test @@ -0,0 +1,25 @@ +# +# LUFA Library +# Copyright (C) Dean Camera, 2012. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# +# -------------------------------------- +# LUFA Project Makefile. +# -------------------------------------- + +MCU = +ARCH = +BOARD = +F_CPU = $(F_USB) +F_USB = 8000000 +OPTIMIZATION = 1 +TARGET = Test +SRC = $(TARGET).c +LUFA_PATH = ../../LUFA +CC_FLAGS = -Werror +DEBUG_LEVEL = 0 + +# Include LUFA build script makefiles +include $(LUFA_PATH)/Build/lufa_build.mk
\ No newline at end of file diff --git a/BuildTests/BoardDriverTest/makefile.uc3 b/BuildTests/BoardDriverTest/makefile.uc3 deleted file mode 100644 index be9e9315..00000000 --- a/BuildTests/BoardDriverTest/makefile.uc3 +++ /dev/null @@ -1,486 +0,0 @@ -# Hey Emacs, this is a -*- makefile -*-
-#----------------------------------------------------------------------------
-# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
-# >> Modified for use with the LUFA project. <<
-#
-# Released to the Public Domain
-#
-# Additional material for this makefile was written by:
-# Peter Fleury
-# Tim Henigan
-# Colin O'Flynn
-# Reiner Patommel
-# Markus Pfaff
-# Sander Pool
-# Frederik Rouleau
-# Carlos Lamas
-# Dean Camera
-# Opendous Inc.
-# Denver Gingerich
-#
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make doxygen = Generate DoxyGen documentation for the project (must have
-# DoxyGen installed)
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-
-# MCU name
-MCU = uc3a3256
-
-
-# Targeted chip architecture (see library "Architectures" documentation)
-ARCH = UC3
-
-
-# Target board (see library "Board Types" documentation, NONE for projects not requiring
-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
-# "Board" inside the application directory.
-BOARD = NONE
-
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This should be the frequency the system core runs at, after the system clock
-# has been set up correctly and started.
-F_CPU = 12000000
-
-
-# USB controller master clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency of the USB controller's clock generator in Hz.
-#
-# For the UC3 chips, this should be equal to 48MHz or 96MHz.
-F_USB = 48000000
-
-
-# Output format. (can be srec, ihex, binary)
-FORMAT = ihex
-
-
-# Target file name (without extension).
-TARGET = Test
-
-
-# Object files directory
-# To put object files in current directory, use a dot (.), do NOT make
-# this an empty or blank macro!
-OBJDIR = .
-
-
-# Path to the LUFA library
-LUFA_PATH = ../..
-
-
-# LUFA library compile-time options and predefined tokens (add '-D' before each token)
-LUFA_OPTS =
-
-
-# Create the LUFA source path variables by including the LUFA root makefile
-include $(LUFA_PATH)/LUFA/makefile
-
-
-# List C source files here. (C dependencies are automatically generated.)
-SRC = Test.c
-
-
-# List C++ source files here. (C dependencies are automatically generated.)
-CPPSRC =
-
-
-# List Assembler source files here.
-# Make them always end in a capital .S. Files ending in a lowercase .s
-# will not be considered source files but generated files (assembler
-# output from the compiler), and will be deleted upon "make clean"!
-# Even though the DOS/Win* filesystem matches both .s and .S the same,
-# it will preserve the spelling of the filenames, and gcc itself does
-# care about how the name is spelled on its command-line.
-ASRC =
-
-
-# Optimization level, can be [0, 1, 2, 3, s].
-# 0 = turn off optimization. s = optimize for size.
-# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPT = 1
-
-
-# List any extra directories to look for include files here.
-# Each directory must be seperated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
-
-
-# Compiler flag to set the C Standard level.
-# c89 = "ANSI" C
-# gnu89 = c89 plus GCC extensions
-# c99 = ISO C99 standard (not yet fully implemented)
-# gnu99 = c99 plus GCC extensions
-CSTANDARD = -std=gnu99
-
-
-# Place -D or -U options here for C sources
-CDEFS = -DF_CPU=$(F_CPU)UL
-CDEFS += -DF_USB=$(F_USB)UL
-CDEFS += -DBOARD=BOARD_$(BOARD)
-CDEFS += -DARCH=ARCH_$(ARCH)
-CDEFS += $(LUFA_OPTS)
-
-
-# Place -D or -U options here for ASM sources
-ADEFS = -DF_CPU=$(F_CPU)
-ADEFS += -DF_USB=$(F_USB)UL
-ADEFS += -DBOARD=BOARD_$(BOARD)
-ADEFS += -DARCH=ARCH_$(ARCH)
-ADEFS += $(LUFA_OPTS)
-
-# Place -D or -U options here for C++ sources
-CPPDEFS = -DF_CPU=$(F_CPU)UL
-CPPDEFS += -DF_USB=$(F_USB)UL
-CPPDEFS += -DBOARD=BOARD_$(BOARD)
-CPPDEFS += -DARCH=ARCH_$(ARCH)
-CPPDEFS += $(LUFA_OPTS)
-
-
-# Debugging level.
-DEBUG = 3
-
-
-#---------------- Compiler Options C ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CFLAGS = -g$(DEBUG)
-CFLAGS += $(CDEFS)
-CFLAGS += -O$(OPT)
-CFLAGS += -funsigned-char
-CFLAGS += -funsigned-bitfields
-CFLAGS += -ffunction-sections
-CFLAGS += -fno-strict-aliasing
-CFLAGS += -Wall
-CFLAGS += -Wstrict-prototypes
-CFLAGS += -masm-addr-pseudos
-#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-CFLAGS += $(CSTANDARD)
-
-
-#---------------- Compiler Options C++ ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CPPFLAGS = -g$(DEBUG)
-CPPFLAGS += $(CPPDEFS)
-CPPFLAGS += -O$(OPT)
-CPPFLAGS += -funsigned-char
-CPPFLAGS += -funsigned-bitfields
-CPPFLAGS += -ffunction-sections
-CPPFLAGS += -fno-strict-aliasing
-CPPFLAGS += -fno-exceptions
-CPPFLAGS += -masm-addr-pseudos
-CPPFLAGS += -Wall
-CPPFLAGS += -Wundef
-#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
-CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-#CPPFLAGS += $(CSTANDARD)
-
-
-#---------------- Assembler Options ----------------
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns: create listing
-# -gstabs: have the assembler create line number information; note that
-# for use in COFF files, additional information about filenames
-# and function names needs to be present in the assembler source
-# files -- see avr-libc docs [FIXME: not yet described there]
-# -listing-cont-lines: Sets the maximum number of continuation lines of hex
-# dump that will be displayed for a given single line of source input.
-ASFLAGS = $(ADEFS)
-#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
-
-
-#---------------- Linker Options ----------------
-# -Wl,...: tell GCC to pass this to linker.
-# -Map: create map file
-# --cref: add cross reference to map file
-#LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
-LDFLAGS += -Wl,--gc-sections --rodata-writable
-LDFLAGS += -Wl,--direct-data
-#LDFLAGS += -T linker_script.x
-
-
-#============================================================================
-
-
-# Define programs and commands.
-SHELL = sh
-CC = avr32-gcc
-OBJCOPY = avr32-objcopy
-OBJDUMP = avr32-objdump
-SIZE = avr32-size
-AR = avr32-ar rcs
-NM = avr32-nm
-REMOVE = rm -f
-REMOVEDIR = rm -rf
-COPY = cp
-WINSHELL = cmd
-
-
-# Define Messages
-# English
-MSG_ERRORS_NONE = Errors: none
-MSG_BEGIN = -------- begin --------
-MSG_END = -------- end --------
-MSG_SIZE_BEFORE = Size before:
-MSG_SIZE_AFTER = Size after:
-MSG_COFF = Converting to AVR COFF:
-MSG_FLASH = Creating load file for Flash:
-MSG_EEPROM = Creating load file for EEPROM:
-MSG_EXTENDED_LISTING = Creating Extended Listing:
-MSG_SYMBOL_TABLE = Creating Symbol Table:
-MSG_LINKING = Linking:
-MSG_COMPILING = Compiling C:
-MSG_COMPILING_CPP = Compiling C++:
-MSG_ASSEMBLING = Assembling:
-MSG_CLEANING = Cleaning project:
-MSG_CREATING_LIBRARY = Creating library:
-
-
-
-
-# Define all object files.
-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
-
-# Define all listing files.
-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
-
-
-# Compiler flags to generate dependency files.
-#GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
-
-
-# Combine all necessary flags and optional flags.
-# Add target processor to flags.
-ALL_CFLAGS = -mpart=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
-ALL_CPPFLAGS = -mpart=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
-ALL_ASFLAGS = -mpart=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
-
-
-
-
-
-# Default target.
-all: begin gccversion sizebefore build sizeafter end
-
-# Change the build target to build a HEX file or a library.
-build: elf hex lss sym
-#build: lib
-
-
-elf: $(TARGET).elf
-hex: $(TARGET).hex
-lss: $(TARGET).lss
-sym: $(TARGET).sym
-LIBNAME=lib$(TARGET).a
-lib: $(LIBNAME)
-
-
-
-# Eye candy.
-# AVR Studio 3.x does not check make's exit code but relies on
-# the following magic strings to be generated by the compile job.
-begin:
- @echo
- @echo $(MSG_BEGIN)
-
-end:
- @echo $(MSG_END)
- @echo
-
-
-# Display size of file.
-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
-ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
-MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
-FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
-
-
-sizebefore:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-sizeafter:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-
-
-# Display compiler version information.
-gccversion :
- @$(CC) --version
-
-
-# Program the device.
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-
-# Create final output files (.hex, .eep) from ELF output file.
-%.hex: %.elf
- @echo
- @echo $(MSG_FLASH) $@
- $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@
-
-# Create extended listing file from ELF output file.
-%.lss: %.elf
- @echo
- @echo $(MSG_EXTENDED_LISTING) $@
- $(OBJDUMP) -h -S -z $< > $@
-
-# Create a symbol table from ELF output file.
-%.sym: %.elf
- @echo
- @echo $(MSG_SYMBOL_TABLE) $@
- $(NM) -n $< > $@
-
-
-
-# Create library from object files.
-.SECONDARY : $(TARGET).a
-.PRECIOUS : $(OBJ)
-%.a: $(OBJ)
- @echo
- @echo $(MSG_CREATING_LIBRARY) $@
- $(AR) $@ $(OBJ)
-
-
-# Link: create ELF output file from object files.
-.SECONDARY : $(TARGET).elf
-.PRECIOUS : $(OBJ)
-%.elf: $(OBJ)
- @echo
- @echo $(MSG_LINKING) $@
- $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
-
-
-# Compile: create object files from C source files.
-$(OBJDIR)/%.o : %.c
- @echo
- @echo $(MSG_COMPILING) $<
- $(CC) -c $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create object files from C++ source files.
-$(OBJDIR)/%.o : %.cpp
- @echo
- @echo $(MSG_COMPILING_CPP) $<
- $(CC) -c $(ALL_CPPFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C source files.
-%.s : %.c
- $(CC) -S $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C++ source files.
-%.s : %.cpp
- $(CC) -S $(ALL_CPPFLAGS) $< -o $@
-
-
-# Assemble: create object files from assembler source files.
-$(OBJDIR)/%.o : %.S
- @echo
- @echo $(MSG_ASSEMBLING) $<
- $(CC) -c $(ALL_ASFLAGS) $< -o $@
-
-
-# Create preprocessed source for use in sending a bug report.
-%.i : %.c
- $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
-
-
-# Target: clean project.
-clean: begin clean_list end
-
-clean_list :
- @echo
- @echo $(MSG_CLEANING)
- $(REMOVE) $(TARGET).hex
- $(REMOVE) $(TARGET).cof
- $(REMOVE) $(TARGET).elf
- $(REMOVE) $(TARGET).map
- $(REMOVE) $(TARGET).sym
- $(REMOVE) $(TARGET).lss
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
- $(REMOVE) $(SRC:.c=.s)
- $(REMOVE) $(SRC:.c=.d)
- $(REMOVE) $(SRC:.c=.i)
- $(REMOVEDIR) .dep
-
-doxygen:
- @echo Generating Project Documentation \($(TARGET)\)...
- @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
- exit 1; \
- fi;
- @echo Documentation Generation Complete.
-
-clean_doxygen:
- rm -rf Documentation
-
-checksource:
- @for f in $(SRC) $(CPPSRC) $(ASRC); do \
- if [ -f $$f ]; then \
- echo "Found Source File: $$f" ; \
- else \
- echo "Source File Not Found: $$f" ; \
- fi; done
-
-
-# Create object files directory
-$(shell mkdir $(OBJDIR) 2>/dev/null)
-
-
-# Include the dependency files.
--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
-
-
-# Listing of phony targets.
-.PHONY : all begin finish end sizebefore sizeafter gccversion \
-build elf hex lss sym doxygen clean clean_list clean_doxygen \
-dfu flip checksource
-
diff --git a/BuildTests/BoardDriverTest/makefile.xmega b/BuildTests/BoardDriverTest/makefile.xmega deleted file mode 100644 index ef6dfe10..00000000 --- a/BuildTests/BoardDriverTest/makefile.xmega +++ /dev/null @@ -1,705 +0,0 @@ -# Hey Emacs, this is a -*- makefile -*-
-#----------------------------------------------------------------------------
-# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
-# >> Modified for use with the LUFA project. <<
-#
-# Released to the Public Domain
-#
-# Additional material for this makefile was written by:
-# Peter Fleury
-# Tim Henigan
-# Colin O'Flynn
-# Reiner Patommel
-# Markus Pfaff
-# Sander Pool
-# Frederik Rouleau
-# Carlos Lamas
-# Dean Camera
-# Opendous Inc.
-# Denver Gingerich
-#
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device, using avrdude.
-# Please customize the avrdude settings below first!
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-# (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-# (must have Atmel FLIP installed).
-#
-# make doxygen = Generate DoxyGen documentation for the project (must have
-# DoxyGen installed)
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-# with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-
-# MCU name
-MCU = atxmega128a1u
-
-
-# Targeted chip architecture (see library "Architectures" documentation)
-ARCH = XMEGA
-
-
-# Target board (see library "Board Types" documentation, NONE for projects not requiring
-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
-# "Board" inside the application directory.
-BOARD = NONE
-
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This should be the frequency the system core runs at, after the system clock
-# has been set up correctly and started.
-F_CPU = 24000000
-
-
-# USB controller master clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency of the USB controller's clock generator in Hz.
-#
-# For the XMEGA chips, this should be equal to a multiple of 6MHz for Low
-# Speed USB mode, or a multiple of 48MHz for Full Speed USB mode.
-F_USB = 48000000
-
-
-# Output format. (can be srec, ihex, binary)
-FORMAT = ihex
-
-
-# Target file name (without extension).
-TARGET = Test
-
-
-# Object files directory
-# To put object files in current directory, use a dot (.), do NOT make
-# this an empty or blank macro!
-OBJDIR = .
-
-
-# Path to the LUFA library
-LUFA_PATH = ../..
-
-
-# LUFA library compile-time options and predefined tokens
-LUFA_OPTS =
-
-
-# Create the LUFA source path variables by including the LUFA root makefile
-include $(LUFA_PATH)/LUFA/makefile
-
-
-# List C source files here. (C dependencies are automatically generated.)
-SRC = Test.c
-
-
-# List C++ source files here. (C dependencies are automatically generated.)
-CPPSRC =
-
-
-# List Assembler source files here.
-# Make them always end in a capital .S. Files ending in a lowercase .s
-# will not be considered source files but generated files (assembler
-# output from the compiler), and will be deleted upon "make clean"!
-# Even though the DOS/Win* filesystem matches both .s and .S the same,
-# it will preserve the spelling of the filenames, and gcc itself does
-# care about how the name is spelled on its command-line.
-ASRC =
-
-
-# Optimization level, can be [0, 1, 2, 3, s].
-# 0 = turn off optimization. s = optimize for size.
-# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPT = 1
-
-
-# List any extra directories to look for include files here.
-# Each directory must be seperated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
-
-
-# Compiler flag to set the C Standard level.
-# c89 = "ANSI" C
-# gnu89 = c89 plus GCC extensions
-# c99 = ISO C99 standard (not yet fully implemented)
-# gnu99 = c99 plus GCC extensions
-CSTANDARD = -std=gnu99
-
-
-# Place -D or -U options here for C sources
-CDEFS = -DF_CPU=$(F_CPU)UL
-CDEFS += -DF_USB=$(F_USB)UL
-CDEFS += -DBOARD=BOARD_$(BOARD)
-CDEFS += -DARCH=ARCH_$(ARCH)
-CDEFS += $(LUFA_OPTS)
-
-
-# Place -D or -U options here for ASM sources
-ADEFS = -DF_CPU=$(F_CPU)
-ADEFS += -DF_USB=$(F_USB)UL
-ADEFS += -DBOARD=BOARD_$(BOARD)
-ADEFS += -DARCH=ARCH_$(ARCH)
-ADEFS += $(LUFA_OPTS)
-
-# Place -D or -U options here for C++ sources
-CPPDEFS = -DF_CPU=$(F_CPU)UL
-CPPDEFS += -DF_USB=$(F_USB)UL
-CPPDEFS += -DBOARD=BOARD_$(BOARD)
-CPPDEFS += -DARCH=ARCH_$(ARCH)
-CPPDEFS += $(LUFA_OPTS)
-
-
-# Debugging format.
-# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
-# AVR Studio 4.10 requires dwarf-2.
-# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
-DEBUG = dwarf-2
-
-
-#---------------- Compiler Options C ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CFLAGS = -g$(DEBUG)
-CFLAGS += $(CDEFS)
-CFLAGS += -O$(OPT)
-CFLAGS += -funsigned-char
-CFLAGS += -funsigned-bitfields
-CFLAGS += -ffunction-sections
-CFLAGS += -fno-inline-small-functions
-CFLAGS += -fpack-struct
-CFLAGS += -fshort-enums
-CFLAGS += -fno-strict-aliasing
-CFLAGS += -Wall
-CFLAGS += -Wstrict-prototypes
-#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-CFLAGS += $(CSTANDARD)
-
-
-#---------------- Compiler Options C++ ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CPPFLAGS = -g$(DEBUG)
-CPPFLAGS += $(CPPDEFS)
-CPPFLAGS += -O$(OPT)
-CPPFLAGS += -funsigned-char
-CPPFLAGS += -funsigned-bitfields
-CPPFLAGS += -fpack-struct
-CPPFLAGS += -fshort-enums
-CPPFLAGS += -ffunction-sections
-CPPFLAGS += -fno-strict-aliasing
-CPPFLAGS += -fno-exceptions
-CPPFLAGS += -Wall
-CPPFLAGS += -Wundef
-#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
-CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-#CPPFLAGS += $(CSTANDARD)
-
-
-#---------------- Assembler Options ----------------
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns: create listing
-# -gstabs: have the assembler create line number information; note that
-# for use in COFF files, additional information about filenames
-# and function names needs to be present in the assembler source
-# files -- see avr-libc docs [FIXME: not yet described there]
-# -listing-cont-lines: Sets the maximum number of continuation lines of hex
-# dump that will be displayed for a given single line of source input.
-ASFLAGS = $(ADEFS)
-#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
-
-
-#---------------- Library Options ----------------
-# Minimalistic printf version
-PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
-
-# Floating point printf version (requires MATH_LIB = -lm below)
-PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
-
-# If this is left blank, then it will use the Standard printf version.
-PRINTF_LIB =
-#PRINTF_LIB = $(PRINTF_LIB_MIN)
-#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
-
-
-# Minimalistic scanf version
-SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
-
-# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
-SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
-
-# If this is left blank, then it will use the Standard scanf version.
-SCANF_LIB =
-#SCANF_LIB = $(SCANF_LIB_MIN)
-#SCANF_LIB = $(SCANF_LIB_FLOAT)
-
-
-MATH_LIB = -lm
-
-
-# List any extra directories to look for libraries here.
-# Each directory must be seperated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRALIBDIRS =
-
-
-
-#---------------- External Memory Options ----------------
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# used for variables (.data/.bss) and heap (malloc()).
-#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# only used for heap (malloc()).
-#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
-
-EXTMEMOPTS =
-
-
-
-#---------------- Linker Options ----------------
-# -Wl,...: tell GCC to pass this to linker.
-# -Map: create map file
-# --cref: add cross reference to map file
-#LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
-LDFLAGS += -Wl,--relax
-LDFLAGS += -Wl,--gc-sections
-LDFLAGS += $(EXTMEMOPTS)
-LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
-LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
-#LDFLAGS += -T linker_script.x
-
-
-
-#---------------- Programming Options (avrdude) ----------------
-
-# Programming hardware
-# Type: avrdude -c ?
-# to get a full listing.
-#
-AVRDUDE_PROGRAMMER = jtagmkII
-
-# com1 = serial port. Use lpt1 to connect to parallel port.
-AVRDUDE_PORT = usb
-
-AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
-
-
-# Uncomment the following if you want avrdude's erase cycle counter.
-# Note that this counter needs to be initialized first using -Yn,
-# see avrdude manual.
-#AVRDUDE_ERASE_COUNTER = -y
-
-# Uncomment the following if you do /not/ wish a verification to be
-# performed after programming the device.
-#AVRDUDE_NO_VERIFY = -V
-
-# Increase verbosity level. Please use this when submitting bug
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
-# to submit bug reports.
-#AVRDUDE_VERBOSE = -v -v
-
-AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
-
-
-
-#---------------- Debugging Options ----------------
-
-# For simulavr only - target MCU frequency.
-DEBUG_MFREQ = $(F_CPU)
-
-# Set the DEBUG_UI to either gdb or insight.
-# DEBUG_UI = gdb
-DEBUG_UI = insight
-
-# Set the debugging back-end to either avarice, simulavr.
-DEBUG_BACKEND = avarice
-#DEBUG_BACKEND = simulavr
-
-# GDB Init Filename.
-GDBINIT_FILE = __avr_gdbinit
-
-# When using avarice settings for the JTAG
-JTAG_DEV = /dev/com1
-
-# Debugging port used to communicate between GDB / avarice / simulavr.
-DEBUG_PORT = 4242
-
-# Debugging host used to communicate between GDB / avarice / simulavr, normally
-# just set to localhost unless doing some sort of crazy debugging when
-# avarice is running on a different computer.
-DEBUG_HOST = localhost
-
-
-
-#============================================================================
-
-
-# Define programs and commands.
-SHELL = sh
-CC = avr-gcc
-OBJCOPY = avr-objcopy
-OBJDUMP = avr-objdump
-SIZE = avr-size
-AR = avr-ar rcs
-NM = avr-nm
-AVRDUDE = avrdude
-REMOVE = rm -f
-REMOVEDIR = rm -rf
-COPY = cp
-WINSHELL = cmd
-
-
-# Define Messages
-# English
-MSG_ERRORS_NONE = Errors: none
-MSG_BEGIN = -------- begin --------
-MSG_END = -------- end --------
-MSG_SIZE_BEFORE = Size before:
-MSG_SIZE_AFTER = Size after:
-MSG_COFF = Converting to AVR COFF:
-MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
-MSG_FLASH = Creating load file for Flash:
-MSG_EEPROM = Creating load file for EEPROM:
-MSG_EXTENDED_LISTING = Creating Extended Listing:
-MSG_SYMBOL_TABLE = Creating Symbol Table:
-MSG_LINKING = Linking:
-MSG_COMPILING = Compiling C:
-MSG_COMPILING_CPP = Compiling C++:
-MSG_ASSEMBLING = Assembling:
-MSG_CLEANING = Cleaning project:
-MSG_CREATING_LIBRARY = Creating library:
-
-
-
-
-# Define all object files.
-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
-
-# Define all listing files.
-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
-
-
-# Compiler flags to generate dependency files.
-#GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
-
-
-# Combine all necessary flags and optional flags.
-# Add target processor to flags.
-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
-ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
-
-
-
-
-
-# Default target.
-all: begin gccversion sizebefore build sizeafter end
-
-# Change the build target to build a HEX file or a library.
-build: elf hex eep lss sym
-#build: lib
-
-
-elf: $(TARGET).elf
-hex: $(TARGET).hex
-eep: $(TARGET).eep
-lss: $(TARGET).lss
-sym: $(TARGET).sym
-LIBNAME=lib$(TARGET).a
-lib: $(LIBNAME)
-
-
-
-# Eye candy.
-# AVR Studio 3.x does not check make's exit code but relies on
-# the following magic strings to be generated by the compile job.
-begin:
- @echo
- @echo $(MSG_BEGIN)
-
-end:
- @echo $(MSG_END)
- @echo
-
-
-# Display size of file.
-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
-ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
-MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
-FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
-
-
-sizebefore:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-sizeafter:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-
-
-# Display compiler version information.
-gccversion :
- @$(CC) --version
-
-
-# Program the device.
-program: $(TARGET).hex $(TARGET).eep
- $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- $(COPY) $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
- $(REMOVE) $(TARGET)eep.hex
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) eeprom-flash $(TARGET).eep
- dfu-programmer $(MCU) reset
-
-
-# Generate avr-gdb config/init file which does the following:
-# define the reset signal, load the target file, connect to target, and set
-# a breakpoint at main().
-gdb-config:
- @$(REMOVE) $(GDBINIT_FILE)
- @echo define reset >> $(GDBINIT_FILE)
- @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
- @echo end >> $(GDBINIT_FILE)
- @echo file $(TARGET).elf >> $(GDBINIT_FILE)
- @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
-ifeq ($(DEBUG_BACKEND),simulavr)
- @echo load >> $(GDBINIT_FILE)
-endif
- @echo break main >> $(GDBINIT_FILE)
-
-debug: gdb-config $(TARGET).elf
-ifeq ($(DEBUG_BACKEND), avarice)
- @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
- @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
- $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
- @$(WINSHELL) /c pause
-
-else
- @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
- $(DEBUG_MFREQ) --port $(DEBUG_PORT)
-endif
- @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
-
-
-
-
-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
-COFFCONVERT = $(OBJCOPY) --debugging
-COFFCONVERT += --change-section-address .data-0x800000
-COFFCONVERT += --change-section-address .bss-0x800000
-COFFCONVERT += --change-section-address .noinit-0x800000
-COFFCONVERT += --change-section-address .eeprom-0x810000
-
-
-
-coff: $(TARGET).elf
- @echo
- @echo $(MSG_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
-
-
-extcoff: $(TARGET).elf
- @echo
- @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
-
-
-
-# Create final output files (.hex, .eep) from ELF output file.
-%.hex: %.elf
- @echo
- @echo $(MSG_FLASH) $@
- $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@
-
-%.eep: %.elf
- @echo
- @echo $(MSG_EEPROM) $@
- -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
- --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
-
-# Create extended listing file from ELF output file.
-%.lss: %.elf
- @echo
- @echo $(MSG_EXTENDED_LISTING) $@
- $(OBJDUMP) -h -S -z $< > $@
-
-# Create a symbol table from ELF output file.
-%.sym: %.elf
- @echo
- @echo $(MSG_SYMBOL_TABLE) $@
- $(NM) -n $< > $@
-
-
-
-# Create library from object files.
-.SECONDARY : $(TARGET).a
-.PRECIOUS : $(OBJ)
-%.a: $(OBJ)
- @echo
- @echo $(MSG_CREATING_LIBRARY) $@
- $(AR) $@ $(OBJ)
-
-
-# Link: create ELF output file from object files.
-.SECONDARY : $(TARGET).elf
-.PRECIOUS : $(OBJ)
-%.elf: $(OBJ)
- @echo
- @echo $(MSG_LINKING) $@
- $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
-
-
-# Compile: create object files from C source files.
-$(OBJDIR)/%.o : %.c
- @echo
- @echo $(MSG_COMPILING) $<
- $(CC) -c $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create object files from C++ source files.
-$(OBJDIR)/%.o : %.cpp
- @echo
- @echo $(MSG_COMPILING_CPP) $<
- $(CC) -c $(ALL_CPPFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C source files.
-%.s : %.c
- $(CC) -S $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C++ source files.
-%.s : %.cpp
- $(CC) -S $(ALL_CPPFLAGS) $< -o $@
-
-
-# Assemble: create object files from assembler source files.
-$(OBJDIR)/%.o : %.S
- @echo
- @echo $(MSG_ASSEMBLING) $<
- $(CC) -c $(ALL_ASFLAGS) $< -o $@
-
-
-# Create preprocessed source for use in sending a bug report.
-%.i : %.c
- $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
-
-
-# Target: clean project.
-clean: begin clean_list end
-
-clean_list :
- @echo
- @echo $(MSG_CLEANING)
- $(REMOVE) $(TARGET).hex
- $(REMOVE) $(TARGET).eep
- $(REMOVE) $(TARGET).cof
- $(REMOVE) $(TARGET).elf
- $(REMOVE) $(TARGET).map
- $(REMOVE) $(TARGET).sym
- $(REMOVE) $(TARGET).lss
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
- $(REMOVE) $(SRC:.c=.s)
- $(REMOVE) $(SRC:.c=.d)
- $(REMOVE) $(SRC:.c=.i)
- $(REMOVEDIR) .dep
-
-doxygen:
- @echo Generating Project Documentation \($(TARGET)\)...
- @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
- exit 1; \
- fi;
- @echo Documentation Generation Complete.
-
-clean_doxygen:
- rm -rf Documentation
-
-checksource:
- @for f in $(SRC) $(CPPSRC) $(ASRC); do \
- if [ -f $$f ]; then \
- echo "Found Source File: $$f" ; \
- else \
- echo "Source File Not Found: $$f" ; \
- fi; done
-
-
-# Create object files directory
-$(shell mkdir $(OBJDIR) 2>/dev/null)
-
-
-# Include the dependency files.
--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
-
-
-# Listing of phony targets.
-.PHONY : all begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff doxygen clean \
-clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
-debug gdb-config checksource
diff --git a/BuildTests/BootloaderTest/BootloaderDeviceMap.cfg b/BuildTests/BootloaderTest/BootloaderDeviceMap.cfg index 082b8f50..ec435967 100644 --- a/BuildTests/BootloaderTest/BootloaderDeviceMap.cfg +++ b/BuildTests/BootloaderTest/BootloaderDeviceMap.cfg @@ -1,63 +1,123 @@ -#
-# LUFA Library
-# Copyright (C) Dean Camera, 2012.
-#
-# dean [at] fourwalledcubicle [dot] com
-# www.lufa-lib.org
-#
-#
-# =============================================================================
-# Bootloader configuration map script, processed with the "BootloaderTest"
-# makefile. This script file defines the targets for each LUFA bootloader,
-# which are then built as part of the build test to ensure that there are no
-# failures on all standard configurations. To add a new build target for a
-# bootloader to this script, use the format:
-#
-# BOOTLOADER = {ARCH} : {MCU} : {BOARD} : {FLASH SIZE KB} : {BOOT SIZE KB} :
-#
-# And re-run the makefile.
-# =============================================================================
-#
-#
-# ------------ CDC Bootloader -------------
-CDC = avr8 : at90usb1287 : NONE : 128 : 8 :
-CDC = avr8 : at90usb647 : NONE : 64 : 4 :
-CDC = avr8 : at90usb1286 : NONE : 128 : 8 :
-CDC = avr8 : at90usb646 : NONE : 64 : 4 :
-CDC = avr8 : atmega32u6 : NONE : 32 : 4 :
-CDC = avr8 : atmega32u4 : NONE : 32 : 4 :
-CDC = avr8 : atmega16u4 : NONE : 16 : 4 :
-CDC = avr8 : atmega32u2 : NONE : 32 : 4 :
-CDC = avr8 : atmega16u2 : NONE : 16 : 4 :
-CDC = avr8 : atmega8u2 : NONE : 8 : 4 :
-CDC = avr8 : at90usb162 : NONE : 16 : 4 :
-CDC = avr8 : at90usb82 : NONE : 8 : 4 :
-#
-# ------------ DFU Bootloader -------------
-DFU = avr8 : at90usb1287 : NONE : 128 : 8 :
-DFU = avr8 : at90usb647 : NONE : 64 : 4 :
-DFU = avr8 : at90usb1286 : NONE : 128 : 8 :
-DFU = avr8 : at90usb646 : NONE : 64 : 4 :
-DFU = avr8 : atmega32u6 : NONE : 32 : 4 :
-DFU = avr8 : atmega32u4 : NONE : 32 : 4 :
-DFU = avr8 : atmega16u4 : NONE : 16 : 4 :
-DFU = avr8 : atmega32u2 : NONE : 32 : 4 :
-DFU = avr8 : atmega16u2 : NONE : 16 : 4 :
-DFU = avr8 : atmega8u2 : NONE : 8 : 4 :
-DFU = avr8 : at90usb162 : NONE : 16 : 4 :
-DFU = avr8 : at90usb82 : NONE : 8 : 4 :
-#
-# ------------ HID Bootloader -------------
-HID = avr8 : at90usb1287 : NONE : 128 : 4 :
-HID = avr8 : at90usb647 : NONE : 64 : 4 :
-HID = avr8 : at90usb1286 : NONE : 128 : 4 :
-HID = avr8 : at90usb646 : NONE : 64 : 4 :
-HID = avr8 : atmega32u6 : NONE : 32 : 4 :
-HID = avr8 : atmega32u4 : NONE : 32 : 4 :
-HID = avr8 : atmega16u4 : NONE : 16 : 4 :
-HID = avr8 : atmega32u2 : NONE : 32 : 2 :
-HID = avr8 : atmega16u2 : NONE : 16 : 2 :
-HID = avr8 : atmega8u2 : NONE : 8 : 2 :
-HID = avr8 : at90usb162 : NONE : 16 : 2 :
-HID = avr8 : at90usb82 : NONE : 8 : 2 :
+# +# LUFA Library +# Copyright (C) Dean Camera, 2012. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# +# +# ============================================================================= +# Bootloader configuration map script, processed with the "BootloaderTest" +# makefile. This script file defines the targets for each LUFA bootloader, +# which are then built as part of the build test to ensure that there are no +# failures on all standard configurations. To add a new build target for a +# bootloader to this script, use the format: +# +# BOOTLOADER = {ARCH} : {MCU} : {BOARD} : {FLASH SIZE KB} : {BOOT SIZE KB} : {F_USB MHZ} +# +# And re-run the makefile. +# ============================================================================= +# +# +# ------------ CDC Bootloader -------------------- +CDC = AVR8 : at90usb1287 : XPLAIN : 128 : 8 : 8 : +CDC = AVR8 : at90usb1287 : NONE : 128 : 8 : 8 : +CDC = AVR8 : at90usb1287 : NONE : 128 : 4 : 8 : +CDC = AVR8 : at90usb647 : NONE : 64 : 4 : 8 : +CDC = AVR8 : at90usb1286 : NONE : 128 : 8 : 8 : +CDC = AVR8 : at90usb1286 : NONE : 128 : 4 : 8 : +CDC = AVR8 : at90usb646 : NONE : 64 : 4 : 8 : +CDC = AVR8 : atmega32u6 : NONE : 32 : 4 : 8 : +CDC = AVR8 : atmega32u4 : NONE : 32 : 4 : 8 : +CDC = AVR8 : atmega16u4 : NONE : 16 : 4 : 8 : +CDC = AVR8 : atmega32u2 : NONE : 32 : 4 : 8 : +CDC = AVR8 : atmega16u2 : NONE : 16 : 4 : 8 : +CDC = AVR8 : atmega8u2 : NONE : 8 : 4 : 8 : +CDC = AVR8 : at90usb162 : NONE : 16 : 4 : 8 : +CDC = AVR8 : at90usb82 : NONE : 8 : 4 : 8 : +CDC = AVR8 : at90usb1287 : NONE : 128 : 8 : 16 : +CDC = AVR8 : at90usb1287 : NONE : 128 : 4 : 16 : +CDC = AVR8 : at90usb647 : NONE : 64 : 4 : 16 : +CDC = AVR8 : at90usb1286 : NONE : 128 : 8 : 16 : +CDC = AVR8 : at90usb1286 : NONE : 128 : 4 : 16 : +CDC = AVR8 : at90usb646 : NONE : 64 : 4 : 16 : +CDC = AVR8 : atmega32u6 : NONE : 32 : 4 : 16 : +CDC = AVR8 : atmega32u4 : NONE : 32 : 4 : 16 : +CDC = AVR8 : atmega16u4 : NONE : 16 : 4 : 16 : +CDC = AVR8 : atmega32u2 : NONE : 32 : 4 : 16 : +CDC = AVR8 : atmega16u2 : NONE : 16 : 4 : 16 : +CDC = AVR8 : atmega8u2 : NONE : 8 : 4 : 16 : +CDC = AVR8 : at90usb162 : NONE : 16 : 4 : 16 : +CDC = AVR8 : at90usb82 : NONE : 8 : 4 : 16 : +# +# ------------ DFU Bootloader -------------------- +DFU = AVR8 : at90usb1287 : XPLAIN : 128 : 8 : 8 : +DFU = AVR8 : at90usb1287 : NONE : 128 : 8 : 8 : +DFU = AVR8 : at90usb1287 : NONE : 128 : 4 : 8 : +DFU = AVR8 : at90usb647 : NONE : 64 : 4 : 8 : +DFU = AVR8 : at90usb1286 : NONE : 128 : 8 : 8 : +DFU = AVR8 : at90usb1286 : NONE : 128 : 4 : 8 : +DFU = AVR8 : at90usb646 : NONE : 64 : 4 : 8 : +DFU = AVR8 : atmega32u6 : NONE : 32 : 4 : 8 : +DFU = AVR8 : atmega32u4 : NONE : 32 : 4 : 8 : +DFU = AVR8 : atmega16u4 : NONE : 16 : 4 : 8 : +DFU = AVR8 : atmega32u2 : NONE : 32 : 4 : 8 : +DFU = AVR8 : atmega16u2 : NONE : 16 : 4 : 8 : +DFU = AVR8 : atmega8u2 : NONE : 8 : 4 : 8 : +DFU = AVR8 : at90usb162 : NONE : 16 : 4 : 8 : +DFU = AVR8 : at90usb82 : NONE : 8 : 4 : 8 : +DFU = AVR8 : at90usb1287 : NONE : 128 : 8 : 16 : +DFU = AVR8 : at90usb1287 : NONE : 128 : 4 : 16 : +DFU = AVR8 : at90usb647 : NONE : 64 : 4 : 16 : +DFU = AVR8 : at90usb1286 : NONE : 128 : 8 : 16 : +DFU = AVR8 : at90usb1286 : NONE : 128 : 4 : 16 : +DFU = AVR8 : at90usb646 : NONE : 64 : 4 : 16 : +DFU = AVR8 : atmega32u6 : NONE : 32 : 4 : 16 : +DFU = AVR8 : atmega32u4 : NONE : 32 : 4 : 16 : +DFU = AVR8 : atmega16u4 : NONE : 16 : 4 : 16 : +DFU = AVR8 : atmega32u2 : NONE : 32 : 4 : 16 : +DFU = AVR8 : atmega16u2 : NONE : 16 : 4 : 16 : +DFU = AVR8 : atmega8u2 : NONE : 8 : 4 : 16 : +DFU = AVR8 : at90usb162 : NONE : 16 : 4 : 16 : +DFU = AVR8 : at90usb82 : NONE : 8 : 4 : 16 : +# +# ------------ HID Bootloader -------------------- +HID = AVR8 : at90usb1287 : NONE : 128 : 8 : 8 : +HID = AVR8 : at90usb1287 : NONE : 128 : 4 : 8 : +HID = AVR8 : at90usb647 : NONE : 64 : 4 : 8 : +HID = AVR8 : at90usb1286 : NONE : 128 : 8 : 8 : +HID = AVR8 : at90usb1286 : NONE : 128 : 4 : 8 : +HID = AVR8 : at90usb646 : NONE : 64 : 4 : 8 : +HID = AVR8 : atmega32u6 : NONE : 32 : 4 : 8 : +HID = AVR8 : atmega32u4 : NONE : 32 : 4 : 8 : +HID = AVR8 : atmega16u4 : NONE : 16 : 4 : 8 : +HID = AVR8 : atmega32u2 : NONE : 32 : 2 : 8 : +HID = AVR8 : atmega32u2 : NONE : 32 : 4 : 8 : +HID = AVR8 : atmega16u2 : NONE : 16 : 2 : 8 : +HID = AVR8 : atmega16u2 : NONE : 16 : 4 : 8 : +HID = AVR8 : atmega8u2 : NONE : 8 : 2 : 8 : +HID = AVR8 : atmega8u2 : NONE : 8 : 4 : 8 : +HID = AVR8 : at90usb162 : NONE : 16 : 2 : 8 : +HID = AVR8 : at90usb162 : NONE : 16 : 4 : 8 : +HID = AVR8 : at90usb162 : NONE : 16 : 2 : 8 : +HID = AVR8 : at90usb162 : NONE : 16 : 4 : 8 : +HID = AVR8 : at90usb1287 : NONE : 128 : 8 : 8 : +HID = AVR8 : at90usb1287 : NONE : 128 : 4 : 8 : +HID = AVR8 : at90usb647 : NONE : 64 : 4 : 8 : +HID = AVR8 : at90usb1286 : NONE : 128 : 8 : 16 : +HID = AVR8 : at90usb1286 : NONE : 128 : 4 : 16 : +HID = AVR8 : at90usb646 : NONE : 64 : 4 : 16 : +HID = AVR8 : atmega32u6 : NONE : 32 : 4 : 16 : +HID = AVR8 : atmega32u4 : NONE : 32 : 4 : 16 : +HID = AVR8 : atmega16u4 : NONE : 16 : 4 : 16 : +HID = AVR8 : atmega32u2 : NONE : 32 : 2 : 16 : +HID = AVR8 : atmega32u2 : NONE : 32 : 4 : 16 : +HID = AVR8 : atmega16u2 : NONE : 16 : 2 : 16 : +HID = AVR8 : atmega16u2 : NONE : 16 : 4 : 16 : +HID = AVR8 : atmega8u2 : NONE : 8 : 2 : 16 : +HID = AVR8 : atmega8u2 : NONE : 8 : 4 : 16 : +HID = AVR8 : at90usb162 : NONE : 16 : 2 : 16 : +HID = AVR8 : at90usb162 : NONE : 16 : 4 : 16 : +HID = AVR8 : at90usb162 : NONE : 16 : 2 : 16 : +HID = AVR8 : at90usb162 : NONE : 16 : 4 : 16 : #
\ No newline at end of file diff --git a/BuildTests/BootloaderTest/makefile b/BuildTests/BootloaderTest/makefile index 71fa21a4..4a281da0 100644 --- a/BuildTests/BootloaderTest/makefile +++ b/BuildTests/BootloaderTest/makefile @@ -1,58 +1,64 @@ -#
-# LUFA Library
-# Copyright (C) Dean Camera, 2012.
-#
-# dean [at] fourwalledcubicle [dot] com
-# www.lufa-lib.org
-#
-
-# Makefile for the bootloader build test. This
-# test attempts to build all the bootloaders
-# with all supported device configurations.
-
-# Path to the root of the LUFA tree to scan
-LUFA_ROOT_PATH = ../..
-
-
-all: begin testbootloaders clean end
-
-begin:
- @echo Executing build test "BootloaderTest".
- @echo
-
-end:
- @echo Build test "BootloaderTest" complete.
- @echo
-
-testbootloaders:
- @echo "buildtest:" > BuildMakefile
-
- @while read line; \
- do \
- build_cfg=`echo $$line | grep -v "#" | sed 's/ //g'`; \
- \
- if ( test -n "$$build_cfg" ); then \
- build_bootloader=`echo $$build_cfg | cut -d'=' -f1`; \
- build_cfg=`echo $$build_cfg | cut -d'=' -f2-`; \
- \
- build_arch=`echo $$build_cfg | cut -d':' -f1`; \
- build_mcu=`echo $$build_cfg | cut -d':' -f2`; \
- build_board=`echo $$build_cfg | cut -d':' -f3`; \
- build_flashsize=`echo $$build_cfg | cut -d':' -f4`; \
- build_bootsize=`echo $$build_cfg | cut -d':' -f5`; \
- \
- printf "Found bootloader configuration for bootloader '%s' (FLASH: %3s KB | BOOT: %3s KB | MCU: %12s / %4s)\n" $$build_bootloader $$build_flashsize $$build_bootsize $$build_mcu $$build_arch; \
- \
- printf "\t@echo Building bootloader %s - %s - FLASH: %s KB, BOOT: %s KB\n" $$build_bootloader $$build_mcu $$build_flashsize $$build_bootsize >> BuildMakefile; \
- printf "\tmake -s -C $(LUFA_ROOT_PATH)/Bootloaders/%s/ clean\n" $$build_bootloader >> BuildMakefile; \
- printf "\tmake -s -C $(LUFA_ROOT_PATH)/Bootloaders/%s/ MCU=%s BOARD=%s FLASH_SIZE_KB=%s BOOT_SECTION_SIZE_KB=%s elf\n\n" $$build_bootloader $$build_mcu $$build_board $$build_flashsize $$build_bootsize >> BuildMakefile; \
- fi; \
- done < BootloaderDeviceMap.cfg
-
- $(MAKE) -f BuildMakefile buildtest
-
-clean:
- rm -f BuildMakefile
-
-%:
-
\ No newline at end of file +# +# LUFA Library +# Copyright (C) Dean Camera, 2012. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# + +# Makefile for the bootloader build test. This +# test attempts to build all the bootloaders +# with all supported device configurations. + +# Path to the LUFA library core +LUFA_PATH := ../../LUFA/ + +# Build test cannot be run with multiple parallel jobs +.NOTPARALLEL: + +all: begin testbootloaders clean end + +begin: + @echo Executing build test "BootloaderTest". + @echo + +end: + @echo Build test "BootloaderTest" complete. + @echo + +testbootloaders: + @echo "buildtest:" > BuildMakefile + + @while read line; \ + do \ + build_cfg=`echo $$line | grep -v "#" | sed 's/ //g'`; \ + \ + if ( test -n "$$build_cfg" ); then \ + build_bootloader=`echo $$build_cfg | cut -d'=' -f1`; \ + build_cfg=`echo $$build_cfg | cut -d'=' -f2-`; \ + \ + build_arch=`echo $$build_cfg | cut -d':' -f1`; \ + build_mcu=`echo $$build_cfg | cut -d':' -f2`; \ + build_board=`echo $$build_cfg | cut -d':' -f3`; \ + build_flashsize=`echo $$build_cfg | cut -d':' -f4`; \ + build_bootsize=`echo $$build_cfg | cut -d':' -f5`; \ + build_fusb=`echo $$build_cfg | cut -d':' -f6`; \ + \ + printf "Found '%s' bootloader configuration (FLASH: %3s KB | BOOT: %3s KB | MCU: %12s / %4s | BOARD: %s | F_USB: %sMHz)\n" $$build_bootloader $$build_flashsize $$build_bootsize $$build_mcu $$build_arch $$build_board $$build_fusb; \ + \ + printf "\t@echo Building bootloader %s - %s - FLASH: %s KB, BOOT: %s KB, BOARD: %s, F_USB: %sMHz\n" $$build_bootloader $$build_mcu $$build_flashsize $$build_bootsize $$build_board $$build_fusb >> BuildMakefile; \ + printf "\t$(MAKE) -C $(patsubst %/,%,$(LUFA_PATH))/../Bootloaders/%s/ clean elf ARCH=%s MCU=%s BOARD=%s FLASH_SIZE_KB=%s BOOT_SECTION_SIZE_KB=%s F_USB=%s000000 DEBUG_LEVEL=0\n\n" $$build_bootloader $$build_arch $$build_mcu $$build_board $$build_flashsize $$build_bootsize $$build_fusb >> BuildMakefile; \ + fi; \ + done < BootloaderDeviceMap.cfg + + $(MAKE) -f BuildMakefile buildtest + +clean: + rm -f BuildMakefile + +%: + +.PHONY: all begin end testbootloaders clean + +# Include LUFA build script makefiles +include $(LUFA_PATH)/Build/lufa_core.mk diff --git a/BuildTests/ModuleTest/Dummy.S b/BuildTests/ModuleTest/Dummy.S index bc13b31e..659d144c 100644 --- a/BuildTests/ModuleTest/Dummy.S +++ b/BuildTests/ModuleTest/Dummy.S @@ -1,41 +1,41 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-.section .text
-
-
-# Mandatory entry point for successful compilation and link
-.global main
-main:
-
-
-# Mandatory callback needed for base compile of the USB driver
-.global CALLBACK_USB_GetDescriptor
-CALLBACK_USB_GetDescriptor:
+/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +.section .text + + +# Mandatory entry point for successful compilation and link +.global main +main: + + +# Mandatory callback needed for base compile of the USB driver +.global CALLBACK_USB_GetDescriptor +CALLBACK_USB_GetDescriptor: diff --git a/BuildTests/ModuleTest/Modules.h b/BuildTests/ModuleTest/Modules.h index 00f7b891..9dd7c463 100644 --- a/BuildTests/ModuleTest/Modules.h +++ b/BuildTests/ModuleTest/Modules.h @@ -1,58 +1,58 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include <LUFA/Common/Common.h>
-
-#include <LUFA/Drivers/USB/USB.h>
-#include <LUFA/Drivers/Misc/RingBuffer.h>
-#include <LUFA/Drivers/Misc/TerminalCodes.h>
-
-#if (ARCH == ARCH_AVR8)
- #if defined(TWCR)
- #include <LUFA/Drivers/Peripheral/TWI.h>
- #endif
-
- #if defined(ADC)
- #include <LUFA/Drivers/Peripheral/ADC.h>
- #endif
-
- #include <LUFA/Drivers/Peripheral/Serial.h>
- #include <LUFA/Drivers/Peripheral/SPI.h>
- #include <LUFA/Drivers/Peripheral/SerialSPI.h>
-#elif (ARCH == ARCH_XMEGA)
- #include <LUFA/Drivers/Peripheral/Serial.h>
- #include <LUFA/Drivers/Peripheral/SPI.h>
- #include <LUFA/Drivers/Peripheral/SerialSPI.h>
-
- #include <LUFA/Platform/XMEGA/ClockManagement.h>
-#elif (ARCH == ARCH_UC3)
- #include <LUFA/Platform/UC3/ClockManagement.h>
- #include <LUFA/Platform/UC3/InterruptManagement.h>
+/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include <LUFA/Common/Common.h> + +#include <LUFA/Drivers/USB/USB.h> +#include <LUFA/Drivers/Misc/RingBuffer.h> +#include <LUFA/Drivers/Misc/TerminalCodes.h> + +#if (ARCH == ARCH_AVR8) + #if defined(TWCR) + #include <LUFA/Drivers/Peripheral/TWI.h> + #endif + + #if defined(ADC) + #include <LUFA/Drivers/Peripheral/ADC.h> + #endif + + #include <LUFA/Drivers/Peripheral/Serial.h> + #include <LUFA/Drivers/Peripheral/SPI.h> + #include <LUFA/Drivers/Peripheral/SerialSPI.h> +#elif (ARCH == ARCH_XMEGA) + #include <LUFA/Drivers/Peripheral/Serial.h> + #include <LUFA/Drivers/Peripheral/SPI.h> + #include <LUFA/Drivers/Peripheral/SerialSPI.h> + + #include <LUFA/Platform/XMEGA/ClockManagement.h> +#elif (ARCH == ARCH_UC3) + #include <LUFA/Platform/UC3/ClockManagement.h> + #include <LUFA/Platform/UC3/InterruptManagement.h> #endif
\ No newline at end of file diff --git a/BuildTests/ModuleTest/Test_C.c b/BuildTests/ModuleTest/Test_C.c index 6cbf8fac..98c17c3f 100644 --- a/BuildTests/ModuleTest/Test_C.c +++ b/BuildTests/ModuleTest/Test_C.c @@ -1,31 +1,31 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
+/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + #include "Modules.h"
\ No newline at end of file diff --git a/BuildTests/ModuleTest/Test_CPP.cpp b/BuildTests/ModuleTest/Test_CPP.cpp index 6cbf8fac..98c17c3f 100644 --- a/BuildTests/ModuleTest/Test_CPP.cpp +++ b/BuildTests/ModuleTest/Test_CPP.cpp @@ -1,31 +1,31 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
+/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + #include "Modules.h"
\ No newline at end of file diff --git a/BuildTests/ModuleTest/makefile b/BuildTests/ModuleTest/makefile index 6811e1a2..738152ea 100644 --- a/BuildTests/ModuleTest/makefile +++ b/BuildTests/ModuleTest/makefile @@ -1,57 +1,66 @@ -#
-# LUFA Library
-# Copyright (C) Dean Camera, 2012.
-#
-# dean [at] fourwalledcubicle [dot] com
-# www.lufa-lib.org
-#
-
-# Makefile for the module build test. This test
-# attempts to build as many modules as possible
-# under all supported architectures, and include
-# all module headers in a simple C and C++
-# application.
-
-
-# List of device families per architecture, one device per architecture sub-family
-AVR8_FAMILIES = at90usb1287 at90usb1286 atmega16u4 atmega16u2 at90usb162
-XMEGA_FAMILIES = atxmega128a1u atxmega128a3u atxmega256a3bu atxmega128a4u atxmega128b1 atxmega128b3 atxmega128c3 atxmega32c4
-UC3_FAMILIES = uc3a0256 uc3a1256 uc3a3256 uc3a4256 uc3b0256 uc3b1256
-
-# List of all device families, with a family postfix
-DEVICE_FAMILIES = $(AVR8_FAMILIES:%=%.avr8) $(XMEGA_FAMILIES:%=%.xmega) $(UC3_FAMILIES:%=%.uc3)
-
-
-all: begin $(DEVICE_FAMILIES) clean end
-
-arch_avr8: begin $(AVR8_FAMILIES:%=%.avr8) end
-arch_xmega: begin $(XMEGA_FAMILIES:%=%.xmega) end
-arch_uc3: begin $(UC3_FAMILIES:%=%.uc3) end
-
-begin:
- @echo Executing build test "ModuleTest".
- @echo
-
-end:
- @echo Build test "ModuleTest" complete.
- @echo
-
-%.avr8:
- $(MAKE) -s -f makefile.avr8 clean
- $(MAKE) -s -f makefile.avr8 all MCU=$(@:%.avr8=%) elf
-
-%.xmega:
- $(MAKE) -s -f makefile.xmega clean
- $(MAKE) -s -f makefile.xmega all MCU=$(@:%.xmega=%) elf
-
-%.uc3:
- $(MAKE) -s -f makefile.uc3 clean
- $(MAKE) -s -f makefile.uc3 all MCU=$(@:%.uc3=%) elf
-
-clean:
- $(MAKE) -s -f makefile.avr8 clean
- $(MAKE) -s -f makefile.xmega clean
- $(MAKE) -s -f makefile.uc3 clean
-
-%:
-
\ No newline at end of file +# +# LUFA Library +# Copyright (C) Dean Camera, 2012. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# + +# Makefile for the module build test. This test +# attempts to build as many modules as possible +# under all supported architectures, and include +# all module headers in a simple C and C++ +# application. + +# Path to the LUFA library core +LUFA_PATH := ../../LUFA/ + +# Build test cannot be run with multiple parallel jobs +.NOTPARALLEL: + +# List of device families per architecture, one device per architecture sub-family +AVR8_FAMILIES := at90usb1287 at90usb1286 atmega16u4 atmega16u2 at90usb162 +XMEGA_FAMILIES := atxmega128a1u atxmega128a3u atxmega256a3bu atxmega128a4u atxmega128b1 atxmega128b3 atxmega128c3 atxmega32c4 +UC3_FAMILIES := uc3a0256 uc3a1256 uc3a3256 uc3a4256 uc3b0256 uc3b1256 + +# List of all device families, with a family postfix +DEVICE_FAMILIES := $(AVR8_FAMILIES:%=%.avr8) $(XMEGA_FAMILIES:%=%.xmega) $(UC3_FAMILIES:%=%.uc3) + + +all: begin $(DEVICE_FAMILIES) clean end + +arch_avr8: begin $(AVR8_FAMILIES:%=%.avr8) end +arch_xmega: begin $(XMEGA_FAMILIES:%=%.xmega) end +arch_uc3: begin $(UC3_FAMILIES:%=%.uc3) end + +begin: + @echo Executing build test "ModuleTest". + @echo + +end: + @echo Build test "ModuleTest" complete. + @echo + +%.avr8: + @echo Building ModuleTest for ARCH=AVR8 MCU=$(@:%.avr8=%)... + $(MAKE) -f makefile.test clean elf ARCH=AVR8 MCU=$(@:%.avr8=%) + +%.xmega: + @echo Building ModuleTest for ARCH=XMEGA MCU=$(@:%.xmega=%)... + $(MAKE) -f makefile.test clean elf ARCH=XMEGA MCU=$(@:%.xmega=%) + +%.uc3: + @echo Building ModuleTest for ARCH=UC3 MCU=$(@:%.uc3=%)... + $(MAKE) -f makefile.test clean elf ARCH=UC3 MCU=$(@:%.uc3=%) + +clean: + $(MAKE) -f makefile.test clean ARCH=AVR8 MCU=$(firstword $(AVR8_FAMILIES)) + $(MAKE) -f makefile.test clean ARCH=XMEGA MCU=$(firstword $(XMEGA_FAMILIES)) + $(MAKE) -f makefile.test clean ARCH=UC3 MCU=$(firstword $(UC3_FAMILIES)) + +%: + +.PHONY: all arch_avr8 arch_xmega arch_uc3 begin end + +# Include LUFA build script makefiles +include $(LUFA_PATH)/Build/lufa_core.mk diff --git a/BuildTests/ModuleTest/makefile.avr8 b/BuildTests/ModuleTest/makefile.avr8 deleted file mode 100644 index 86732094..00000000 --- a/BuildTests/ModuleTest/makefile.avr8 +++ /dev/null @@ -1,742 +0,0 @@ -# Hey Emacs, this is a -*- makefile -*-
-#----------------------------------------------------------------------------
-# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
-# >> Modified for use with the LUFA project. <<
-#
-# Released to the Public Domain
-#
-# Additional material for this makefile was written by:
-# Peter Fleury
-# Tim Henigan
-# Colin O'Flynn
-# Reiner Patommel
-# Markus Pfaff
-# Sander Pool
-# Frederik Rouleau
-# Carlos Lamas
-# Dean Camera
-# Opendous Inc.
-# Denver Gingerich
-#
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device, using avrdude.
-# Please customize the avrdude settings below first!
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-# (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-# (must have Atmel FLIP installed).
-#
-# make doxygen = Generate DoxyGen documentation for the project (must have
-# DoxyGen installed)
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-# with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-
-# MCU name
-MCU = at90usb1287
-
-
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-
-# Target board (see library "Board Types" documentation, NONE for projects not requiring
-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
-# "Board" inside the application directory.
-BOARD = NONE
-
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-
-# Output format. (can be srec, ihex, binary)
-FORMAT = ihex
-
-
-# Target file name (without extension).
-TARGET = Test
-
-
-# Object files directory
-# To put object files in current directory, use a dot (.), do NOT make
-# this an empty or blank macro!
-OBJDIR = .
-
-
-# Path to the LUFA library
-LUFA_PATH = ../..
-
-
-# LUFA library compile-time options and predefined tokens
-LUFA_OPTS =
-
-
-# Create the LUFA source path variables by including the LUFA root makefile
-include $(LUFA_PATH)/LUFA/makefile
-
-
-# List C source files here. (C dependencies are automatically generated.)
-SRC = Test_C.c \
- $(LUFA_SRC_USB) \
- $(LUFA_SRC_USBCLASS) \
- $(LUFA_SRC_TEMPERATURE) \
- $(LUFA_SRC_SERIAL) \
- $(LUFA_SRC_TWI) \
-
-
-
-# List C++ source files here. (C dependencies are automatically generated.)
-CPPSRC = Test_CPP.cpp
-
-
-# List Assembler source files here.
-# Make them always end in a capital .S. Files ending in a lowercase .s
-# will not be considered source files but generated files (assembler
-# output from the compiler), and will be deleted upon "make clean"!
-# Even though the DOS/Win* filesystem matches both .s and .S the same,
-# it will preserve the spelling of the filenames, and gcc itself does
-# care about how the name is spelled on its command-line.
-ASRC = Dummy.S
-
-
-# Optimization level, can be [0, 1, 2, 3, s].
-# 0 = turn off optimization. s = optimize for size.
-# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPT = 1
-
-
-# Debugging format.
-# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
-# AVR Studio 4.10 requires dwarf-2.
-# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
-DEBUG = dwarf-2
-
-
-# List any extra directories to look for include files here.
-# Each directory must be seperated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
-
-
-# Compiler flag to set the C Standard level.
-# c89 = "ANSI" C
-# gnu89 = c89 plus GCC extensions
-# c99 = ISO C99 standard (not yet fully implemented)
-# gnu99 = c99 plus GCC extensions
-CSTANDARD = -std=c99
-
-
-# Place -D or -U options here for C sources
-CDEFS = -DF_CPU=$(F_CPU)UL
-CDEFS += -DF_USB=$(F_USB)UL
-CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
-CDEFS += $(LUFA_OPTS)
-
-
-# Place -D or -U options here for ASM sources
-ADEFS = -DF_CPU=$(F_CPU)
-ADEFS += -DF_USB=$(F_USB)UL
-ADEFS += -DBOARD=BOARD_$(BOARD)
-ADEFS += $(LUFA_OPTS)
-
-# Place -D or -U options here for C++ sources
-CPPDEFS = -DF_CPU=$(F_CPU)UL
-CPPDEFS += -DF_USB=$(F_USB)UL
-CPPDEFS += -DBOARD=BOARD_$(BOARD)
-CPPDEFS += $(LUFA_OPTS)
-#CPPDEFS += -D__STDC_LIMIT_MACROS
-#CPPDEFS += -D__STDC_CONSTANT_MACROS
-
-
-
-#---------------- Compiler Options C ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CFLAGS = -g$(DEBUG)
-CFLAGS += $(CDEFS)
-CFLAGS += -O$(OPT)
-CFLAGS += -funsigned-char
-CFLAGS += -funsigned-bitfields
-CFLAGS += -ffunction-sections
-CFLAGS += -fno-inline-small-functions
-CFLAGS += -fpack-struct
-CFLAGS += -fshort-enums
-CFLAGS += -fno-strict-aliasing
-CFLAGS += -fno-split-wide-types
-#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-CFLAGS += $(CSTANDARD)
-CFLAGS += -Werror
-CFLAGS += -Wall
-CFLAGS += -Wextra
-CFLAGS += -Wstrict-prototypes
-CFLAGS += -Wformat=2
-CFLAGS += -Winit-self
-CFLAGS += -Wswitch-enum
-CFLAGS += -Wunused
-CFLAGS += -Wundef
-CFLAGS += -Wpointer-arith
-CFLAGS += -Wcast-align
-CFLAGS += -Wwrite-strings
-CFLAGS += -Wlogical-op
-CFLAGS += -Wmissing-parameter-type
-CFLAGS += -Wmissing-declarations
-CFLAGS += -Wmissing-field-initializers
-CFLAGS += -Wmissing-format-attribute
-CFLAGS += -Wredundant-decls
-CFLAGS += -Wnested-externs
-CFLAGS += -Woverlength-strings
-#CFLAGS += -Wswitch-default
-#CFLAGS += -Wc++-compat
-#CFLAGS += -Wcast-qual
-#CFLAGS += -Wconversion
-#CFLAGS += -Wjump-misses-init
-#CFLAGS += -pedantic
-
-
-#---------------- Compiler Options C++ ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CPPFLAGS = -g$(DEBUG)
-CPPFLAGS += $(CPPDEFS)
-CPPFLAGS += -O$(OPT)
-CPPFLAGS += -funsigned-char
-CPPFLAGS += -funsigned-bitfields
-CPPFLAGS += -fpack-struct
-CPPFLAGS += -fshort-enums
-CPPFLAGS += -fno-exceptions
-CPPFLAGS += -Wall
-CPPFLAGS += -Wundef
-#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
-CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-
-
-#---------------- Assembler Options ----------------
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns: create listing
-# -gstabs: have the assembler create line number information; note that
-# for use in COFF files, additional information about filenames
-# and function names needs to be present in the assembler source
-# files -- see avr-libc docs [FIXME: not yet described there]
-# -listing-cont-lines: Sets the maximum number of continuation lines of hex
-# dump that will be displayed for a given single line of source input.
-ASFLAGS = $(ADEFS)
-#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
-
-
-#---------------- Library Options ----------------
-# Minimalistic printf version
-PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
-
-# Floating point printf version (requires MATH_LIB = -lm below)
-PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
-
-# If this is left blank, then it will use the Standard printf version.
-PRINTF_LIB =
-#PRINTF_LIB = $(PRINTF_LIB_MIN)
-#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
-
-
-# Minimalistic scanf version
-SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
-
-# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
-SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
-
-# If this is left blank, then it will use the Standard scanf version.
-SCANF_LIB =
-#SCANF_LIB = $(SCANF_LIB_MIN)
-#SCANF_LIB = $(SCANF_LIB_FLOAT)
-
-
-MATH_LIB = -lm
-
-
-# List any extra directories to look for libraries here.
-# Each directory must be seperated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRALIBDIRS =
-
-
-
-#---------------- External Memory Options ----------------
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# used for variables (.data/.bss) and heap (malloc()).
-#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# only used for heap (malloc()).
-#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
-
-EXTMEMOPTS =
-
-
-
-#---------------- Linker Options ----------------
-# -Wl,...: tell GCC to pass this to linker.
-# -Map: create map file
-# --cref: add cross reference to map file
-#LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
-LDFLAGS += -Wl,--relax
-LDFLAGS += -Wl,--gc-sections
-LDFLAGS += $(EXTMEMOPTS)
-LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
-LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
-#LDFLAGS += -T linker_script.x
-
-
-
-#---------------- Programming Options (avrdude) ----------------
-
-# Programming hardware
-# Type: avrdude -c ?
-# to get a full listing.
-#
-AVRDUDE_PROGRAMMER = jtagmkII
-
-# com1 = serial port. Use lpt1 to connect to parallel port.
-AVRDUDE_PORT = usb
-
-AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
-
-
-# Uncomment the following if you want avrdude's erase cycle counter.
-# Note that this counter needs to be initialized first using -Yn,
-# see avrdude manual.
-#AVRDUDE_ERASE_COUNTER = -y
-
-# Uncomment the following if you do /not/ wish a verification to be
-# performed after programming the device.
-#AVRDUDE_NO_VERIFY = -V
-
-# Increase verbosity level. Please use this when submitting bug
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
-# to submit bug reports.
-#AVRDUDE_VERBOSE = -v -v
-
-AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
-
-
-
-#---------------- Debugging Options ----------------
-
-# For simulavr only - target MCU frequency.
-DEBUG_MFREQ = $(F_CPU)
-
-# Set the DEBUG_UI to either gdb or insight.
-# DEBUG_UI = gdb
-DEBUG_UI = insight
-
-# Set the debugging back-end to either avarice, simulavr.
-DEBUG_BACKEND = avarice
-#DEBUG_BACKEND = simulavr
-
-# GDB Init Filename.
-GDBINIT_FILE = __avr_gdbinit
-
-# When using avarice settings for the JTAG
-JTAG_DEV = /dev/com1
-
-# Debugging port used to communicate between GDB / avarice / simulavr.
-DEBUG_PORT = 4242
-
-# Debugging host used to communicate between GDB / avarice / simulavr, normally
-# just set to localhost unless doing some sort of crazy debugging when
-# avarice is running on a different computer.
-DEBUG_HOST = localhost
-
-
-
-#============================================================================
-
-
-# Define programs and commands.
-SHELL = sh
-CC = avr-gcc
-OBJCOPY = avr-objcopy
-OBJDUMP = avr-objdump
-SIZE = avr-size
-AR = avr-ar rcs
-NM = avr-nm
-AVRDUDE = avrdude
-REMOVE = rm -f
-REMOVEDIR = rm -rf
-COPY = cp
-WINSHELL = cmd
-
-
-# Define Messages
-# English
-MSG_ERRORS_NONE = Errors: none
-MSG_BEGIN = -------- begin --------
-MSG_END = -------- end --------
-MSG_SIZE_BEFORE = Size before:
-MSG_SIZE_AFTER = Size after:
-MSG_COFF = Converting to AVR COFF:
-MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
-MSG_FLASH = Creating load file for Flash:
-MSG_EEPROM = Creating load file for EEPROM:
-MSG_EXTENDED_LISTING = Creating Extended Listing:
-MSG_SYMBOL_TABLE = Creating Symbol Table:
-MSG_LINKING = Linking:
-MSG_COMPILING = Compiling C:
-MSG_COMPILING_CPP = Compiling C++:
-MSG_ASSEMBLING = Assembling:
-MSG_CLEANING = Cleaning project:
-MSG_CREATING_LIBRARY = Creating library:
-
-
-
-
-# Define all object files.
-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
-
-# Define all listing files.
-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
-
-
-# Compiler flags to generate dependency files.
-#GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
-
-
-# Combine all necessary flags and optional flags.
-# Add target processor to flags.
-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
-ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
-
-
-
-
-
-# Default target.
-all: begin gccversion sizebefore build sizeafter end
-
-# Change the build target to build a HEX file or a library.
-build: elf hex eep lss sym
-#build: lib
-
-
-elf: $(TARGET).elf
-hex: $(TARGET).hex
-eep: $(TARGET).eep
-lss: $(TARGET).lss
-sym: $(TARGET).sym
-LIBNAME=lib$(TARGET).a
-lib: $(LIBNAME)
-
-
-
-# Eye candy.
-# AVR Studio 3.x does not check make's exit code but relies on
-# the following magic strings to be generated by the compile job.
-begin:
- @echo
- @echo $(MSG_BEGIN)
-
-end:
- @echo $(MSG_END)
- @echo
-
-
-# Display size of file.
-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
-ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
-MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
-FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
-
-
-sizebefore:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-sizeafter:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-
-
-# Display compiler version information.
-gccversion :
- @$(CC) --version
-
-
-# Program the device.
-program: $(TARGET).hex $(TARGET).eep
- $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- $(COPY) $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
- $(REMOVE) $(TARGET)eep.hex
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) eeprom-flash $(TARGET).eep
- dfu-programmer $(MCU) reset
-
-
-# Generate avr-gdb config/init file which does the following:
-# define the reset signal, load the target file, connect to target, and set
-# a breakpoint at main().
-gdb-config:
- @$(REMOVE) $(GDBINIT_FILE)
- @echo define reset >> $(GDBINIT_FILE)
- @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
- @echo end >> $(GDBINIT_FILE)
- @echo file $(TARGET).elf >> $(GDBINIT_FILE)
- @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
-ifeq ($(DEBUG_BACKEND),simulavr)
- @echo load >> $(GDBINIT_FILE)
-endif
- @echo break main >> $(GDBINIT_FILE)
-
-debug: gdb-config $(TARGET).elf
-ifeq ($(DEBUG_BACKEND), avarice)
- @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
- @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
- $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
- @$(WINSHELL) /c pause
-
-else
- @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
- $(DEBUG_MFREQ) --port $(DEBUG_PORT)
-endif
- @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
-
-
-
-
-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
-COFFCONVERT = $(OBJCOPY) --debugging
-COFFCONVERT += --change-section-address .data-0x800000
-COFFCONVERT += --change-section-address .bss-0x800000
-COFFCONVERT += --change-section-address .noinit-0x800000
-COFFCONVERT += --change-section-address .eeprom-0x810000
-
-
-
-coff: $(TARGET).elf
- @echo
- @echo $(MSG_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
-
-
-extcoff: $(TARGET).elf
- @echo
- @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
-
-
-
-# Create final output files (.hex, .eep) from ELF output file.
-%.hex: %.elf
- @echo
- @echo $(MSG_FLASH) $@
- $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@
-
-%.eep: %.elf
- @echo
- @echo $(MSG_EEPROM) $@
- -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
- --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
-
-# Create extended listing file from ELF output file.
-%.lss: %.elf
- @echo
- @echo $(MSG_EXTENDED_LISTING) $@
- $(OBJDUMP) -h -S -z $< > $@
-
-# Create a symbol table from ELF output file.
-%.sym: %.elf
- @echo
- @echo $(MSG_SYMBOL_TABLE) $@
- $(NM) -n $< > $@
-
-
-
-# Create library from object files.
-.SECONDARY : $(TARGET).a
-.PRECIOUS : $(OBJ)
-%.a: $(OBJ)
- @echo
- @echo $(MSG_CREATING_LIBRARY) $@
- $(AR) $@ $(OBJ)
-
-
-# Link: create ELF output file from object files.
-.SECONDARY : $(TARGET).elf
-.PRECIOUS : $(OBJ)
-%.elf: $(OBJ)
- @echo
- @echo $(MSG_LINKING) $@
- $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
-
-
-# Compile: create object files from C source files.
-$(OBJDIR)/%.o : %.c
- @echo
- @echo $(MSG_COMPILING) $<
- $(CC) -c $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create object files from C++ source files.
-$(OBJDIR)/%.o : %.cpp
- @echo
- @echo $(MSG_COMPILING_CPP) $<
- $(CC) -c $(ALL_CPPFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C source files.
-%.s : %.c
- $(CC) -S $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C++ source files.
-%.s : %.cpp
- $(CC) -S $(ALL_CPPFLAGS) $< -o $@
-
-
-# Assemble: create object files from assembler source files.
-$(OBJDIR)/%.o : %.S
- @echo
- @echo $(MSG_ASSEMBLING) $<
- $(CC) -c $(ALL_ASFLAGS) $< -o $@
-
-
-# Create preprocessed source for use in sending a bug report.
-%.i : %.c
- $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
-
-
-# Target: clean project.
-clean: begin clean_list end
-
-clean_list :
- @echo
- @echo $(MSG_CLEANING)
- $(REMOVE) $(TARGET).hex
- $(REMOVE) $(TARGET).eep
- $(REMOVE) $(TARGET).cof
- $(REMOVE) $(TARGET).elf
- $(REMOVE) $(TARGET).map
- $(REMOVE) $(TARGET).sym
- $(REMOVE) $(TARGET).lss
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
- $(REMOVE) $(SRC:.c=.s)
- $(REMOVE) $(SRC:.c=.d)
- $(REMOVE) $(SRC:.c=.i)
- $(REMOVEDIR) .dep
-
-doxygen:
- @echo Generating Project Documentation \($(TARGET)\)...
- @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
- exit 1; \
- fi;
- @echo Documentation Generation Complete.
-
-
-clean_doxygen:
- rm -rf Documentation
-
-checksource:
- @for f in $(SRC) $(CPPSRC) $(ASRC); do \
- if [ -f $$f ]; then \
- echo "Found Source File: $$f" ; \
- else \
- echo "Source File Not Found: $$f" ; \
- fi; done
-
-
-# Create object files directory
-$(shell mkdir $(OBJDIR) 2>/dev/null)
-
-
-# Include the dependency files.
--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
-
-
-# Listing of phony targets.
-.PHONY : all begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff doxygen clean \
-clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
-debug gdb-config checksource
diff --git a/BuildTests/ModuleTest/makefile.test b/BuildTests/ModuleTest/makefile.test new file mode 100644 index 00000000..b01998f4 --- /dev/null +++ b/BuildTests/ModuleTest/makefile.test @@ -0,0 +1,66 @@ +# +# LUFA Library +# Copyright (C) Dean Camera, 2012. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# +# -------------------------------------- +# LUFA Project Makefile. +# -------------------------------------- + +MCU = +ARCH = +BOARD = NONE +F_CPU = $(F_USB) +OPTIMIZATION = 1 +TARGET = Test +SRC = $(TARGET)_C.c $(TARGET)_CPP.cpp Dummy.S $(LUFA_SRC_USB) +LUFA_PATH = ../../LUFA +DEBUG_LEVEL = 0 + +ifeq ($(ARCH), AVR8) +F_USB = 8000000 +else ifeq ($(ARCH), XMEGA) +F_USB = 48000000 +else ifeq ($(ARCH), UC3) +F_USB = 48000000 +endif + +# Generic C/C++ compiler flags +CC_FLAGS = -Wextra +CC_FLAGS += -Werror +CC_FLAGS += -Wformat=2 +CC_FLAGS += -Winit-self +CC_FLAGS += -Wswitch-enum +CC_FLAGS += -Wunused +CC_FLAGS += -Wundef +CC_FLAGS += -Wpointer-arith +CC_FLAGS += -Wcast-align +CC_FLAGS += -Wwrite-strings +CC_FLAGS += -Wlogical-op +CC_FLAGS += -Wmissing-declarations +CC_FLAGS += -Wmissing-field-initializers +CC_FLAGS += -Wmissing-format-attribute +CC_FLAGS += -Woverlength-strings + +# Only enable rendundant declaration warnings for AVR8 target (FIXME) +ifeq ($(ARCH), AVR8) +CC_FLAGS += -Wredundant-decls +endif + +# C compiler only flags +C_FLAGS += -Wmissing-parameter-type +C_FLAGS += -Wnested-externs + +# Potential additional warnings to enable in the future (FIXME) +#CC_FLAGS += -Wswitch-default +#CC_FLAGS += -Wc++-compat +#CC_FLAGS += -Wcast-qual +#CC_FLAGS += -Wconversion +#CC_FLAGS += -Wjump-misses-init +#CC_FLAGS += -pedantic + +# Include LUFA build script makefiles +include $(LUFA_PATH)/Build/lufa_sources.mk +include $(LUFA_PATH)/Build/lufa_build.mk
\ No newline at end of file diff --git a/BuildTests/ModuleTest/makefile.uc3 b/BuildTests/ModuleTest/makefile.uc3 deleted file mode 100644 index 5628748e..00000000 --- a/BuildTests/ModuleTest/makefile.uc3 +++ /dev/null @@ -1,513 +0,0 @@ -# Hey Emacs, this is a -*- makefile -*-
-#----------------------------------------------------------------------------
-# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
-# >> Modified for use with the LUFA project. <<
-#
-# Released to the Public Domain
-#
-# Additional material for this makefile was written by:
-# Peter Fleury
-# Tim Henigan
-# Colin O'Flynn
-# Reiner Patommel
-# Markus Pfaff
-# Sander Pool
-# Frederik Rouleau
-# Carlos Lamas
-# Dean Camera
-# Opendous Inc.
-# Denver Gingerich
-#
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make doxygen = Generate DoxyGen documentation for the project (must have
-# DoxyGen installed)
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-
-# MCU name
-MCU = uc3a3256
-
-
-# Targeted chip architecture (see library "Architectures" documentation)
-ARCH = UC3
-
-
-# Target board (see library "Board Types" documentation, NONE for projects not requiring
-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
-# "Board" inside the application directory.
-BOARD = NONE
-
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This should be the frequency the system core runs at, after the system clock
-# has been set up correctly and started.
-F_CPU = 12000000
-
-
-# USB controller master clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency of the USB controller's clock generator in Hz.
-#
-# For the UC3 chips, this should be equal to 48MHz or 96MHz.
-F_USB = 48000000
-
-
-# Output format. (can be srec, ihex, binary)
-FORMAT = ihex
-
-
-# Target file name (without extension).
-TARGET = Test
-
-
-# Object files directory
-# To put object files in current directory, use a dot (.), do NOT make
-# this an empty or blank macro!
-OBJDIR = .
-
-
-# Path to the LUFA library
-LUFA_PATH = ../..
-
-
-# LUFA library compile-time options and predefined tokens (add '-D' before each token)
-LUFA_OPTS =
-
-
-# Create the LUFA source path variables by including the LUFA root makefile
-include $(LUFA_PATH)/LUFA/makefile
-
-
-# List C source files here. (C dependencies are automatically generated.)
-SRC = Test_C.c \
- $(LUFA_SRC_USB) \
- $(LUFA_SRC_USBCLASS)
-
-
-# List C++ source files here. (C dependencies are automatically generated.)
-CPPSRC = Test_CPP.cpp
-
-
-# List Assembler source files here.
-# Make them always end in a capital .S. Files ending in a lowercase .s
-# will not be considered source files but generated files (assembler
-# output from the compiler), and will be deleted upon "make clean"!
-# Even though the DOS/Win* filesystem matches both .s and .S the same,
-# it will preserve the spelling of the filenames, and gcc itself does
-# care about how the name is spelled on its command-line.
-ASRC = Dummy.S \
- $(LUFA_PATH)/LUFA/Platform/UC3/Exception.S
-
-
-# Optimization level, can be [0, 1, 2, 3, s].
-# 0 = turn off optimization. s = optimize for size.
-# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPT = 1
-
-
-# List any extra directories to look for include files here.
-# Each directory must be seperated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
-
-
-# Compiler flag to set the C Standard level.
-# c89 = "ANSI" C
-# gnu89 = c89 plus GCC extensions
-# c99 = ISO C99 standard (not yet fully implemented)
-# gnu99 = c99 plus GCC extensions
-CSTANDARD = -std=gnu99
-
-
-# Place -D or -U options here for C sources
-CDEFS = -DF_CPU=$(F_CPU)UL
-CDEFS += -DF_USB=$(F_USB)UL
-CDEFS += -DBOARD=BOARD_$(BOARD)
-CDEFS += -DARCH=ARCH_$(ARCH)
-CDEFS += $(LUFA_OPTS)
-
-
-# Place -D or -U options here for ASM sources
-ADEFS = -DF_CPU=$(F_CPU)
-ADEFS += -DF_USB=$(F_USB)UL
-ADEFS += -DBOARD=BOARD_$(BOARD)
-ADEFS += -DARCH=ARCH_$(ARCH)
-ADEFS += $(LUFA_OPTS)
-
-# Place -D or -U options here for C++ sources
-CPPDEFS = -DF_CPU=$(F_CPU)UL
-CPPDEFS += -DF_USB=$(F_USB)UL
-CPPDEFS += -DBOARD=BOARD_$(BOARD)
-CPPDEFS += -DARCH=ARCH_$(ARCH)
-CPPDEFS += $(LUFA_OPTS)
-
-
-# Debugging level.
-DEBUG = 3
-
-
-#---------------- Compiler Options C ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CFLAGS = -g$(DEBUG)
-CFLAGS += $(CDEFS)
-CFLAGS += -O$(OPT)
-CFLAGS += -funsigned-char
-CFLAGS += -funsigned-bitfields
-CFLAGS += -ffunction-sections
-CFLAGS += -fno-strict-aliasing
-CFLAGS += -masm-addr-pseudos
-#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-CFLAGS += $(CSTANDARD)
-CFLAGS += -Werror
-CFLAGS += -Wall
-CFLAGS += -Wextra
-CFLAGS += -Wstrict-prototypes
-CFLAGS += -Wformat=2
-CFLAGS += -Winit-self
-CFLAGS += -Wswitch-enum
-CFLAGS += -Wunused
-CFLAGS += -Wundef
-CFLAGS += -Wpointer-arith
-CFLAGS += -Wcast-align
-CFLAGS += -Wwrite-strings
-CFLAGS += -Wlogical-op
-CFLAGS += -Wmissing-parameter-type
-CFLAGS += -Wmissing-declarations
-CFLAGS += -Wmissing-field-initializers
-CFLAGS += -Wmissing-format-attribute
-#CFLAGS += -Wredundant-decls
-CFLAGS += -Wnested-externs
-CFLAGS += -Woverlength-strings
-#CFLAGS += -Wswitch-default
-#CFLAGS += -Wc++-compat
-#CFLAGS += -Wcast-qual
-#CFLAGS += -Wconversion
-#CFLAGS += -Wjump-misses-init
-#CFLAGS += -pedantic
-
-
-#---------------- Compiler Options C++ ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CPPFLAGS = -g$(DEBUG)
-CPPFLAGS += $(CPPDEFS)
-CPPFLAGS += -O$(OPT)
-CPPFLAGS += -funsigned-char
-CPPFLAGS += -funsigned-bitfields
-CPPFLAGS += -ffunction-sections
-CPPFLAGS += -fno-strict-aliasing
-CPPFLAGS += -fno-exceptions
-CPPFLAGS += -masm-addr-pseudos
-CPPFLAGS += -Wall
-CPPFLAGS += -Wundef
-#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
-CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-#CPPFLAGS += $(CSTANDARD)
-
-
-#---------------- Assembler Options ----------------
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns: create listing
-# -gstabs: have the assembler create line number information; note that
-# for use in COFF files, additional information about filenames
-# and function names needs to be present in the assembler source
-# files -- see avr-libc docs [FIXME: not yet described there]
-# -listing-cont-lines: Sets the maximum number of continuation lines of hex
-# dump that will be displayed for a given single line of source input.
-ASFLAGS = $(ADEFS)
-#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
-
-
-#---------------- Linker Options ----------------
-# -Wl,...: tell GCC to pass this to linker.
-# -Map: create map file
-# --cref: add cross reference to map file
-#LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
-LDFLAGS += -Wl,--gc-sections --rodata-writable
-LDFLAGS += -Wl,--direct-data
-#LDFLAGS += -T linker_script.x
-
-
-#============================================================================
-
-
-# Define programs and commands.
-SHELL = sh
-CC = avr32-gcc
-OBJCOPY = avr32-objcopy
-OBJDUMP = avr32-objdump
-SIZE = avr32-size
-AR = avr32-ar rcs
-NM = avr32-nm
-REMOVE = rm -f
-REMOVEDIR = rm -rf
-COPY = cp
-WINSHELL = cmd
-
-
-# Define Messages
-# English
-MSG_ERRORS_NONE = Errors: none
-MSG_BEGIN = -------- begin --------
-MSG_END = -------- end --------
-MSG_SIZE_BEFORE = Size before:
-MSG_SIZE_AFTER = Size after:
-MSG_COFF = Converting to AVR COFF:
-MSG_FLASH = Creating load file for Flash:
-MSG_EEPROM = Creating load file for EEPROM:
-MSG_EXTENDED_LISTING = Creating Extended Listing:
-MSG_SYMBOL_TABLE = Creating Symbol Table:
-MSG_LINKING = Linking:
-MSG_COMPILING = Compiling C:
-MSG_COMPILING_CPP = Compiling C++:
-MSG_ASSEMBLING = Assembling:
-MSG_CLEANING = Cleaning project:
-MSG_CREATING_LIBRARY = Creating library:
-
-
-
-
-# Define all object files.
-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
-
-# Define all listing files.
-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
-
-
-# Compiler flags to generate dependency files.
-#GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
-
-
-# Combine all necessary flags and optional flags.
-# Add target processor to flags.
-ALL_CFLAGS = -mpart=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
-ALL_CPPFLAGS = -mpart=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
-ALL_ASFLAGS = -mpart=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
-
-
-
-
-
-# Default target.
-all: begin gccversion sizebefore build sizeafter end
-
-# Change the build target to build a HEX file or a library.
-build: elf hex lss sym
-#build: lib
-
-
-elf: $(TARGET).elf
-hex: $(TARGET).hex
-lss: $(TARGET).lss
-sym: $(TARGET).sym
-LIBNAME=lib$(TARGET).a
-lib: $(LIBNAME)
-
-
-
-# Eye candy.
-# AVR Studio 3.x does not check make's exit code but relies on
-# the following magic strings to be generated by the compile job.
-begin:
- @echo
- @echo $(MSG_BEGIN)
-
-end:
- @echo $(MSG_END)
- @echo
-
-
-# Display size of file.
-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
-ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
-MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
-FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
-
-
-sizebefore:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-sizeafter:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-
-
-# Display compiler version information.
-gccversion :
- @$(CC) --version
-
-
-# Program the device.
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-
-# Create final output files (.hex, .eep) from ELF output file.
-%.hex: %.elf
- @echo
- @echo $(MSG_FLASH) $@
- $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@
-
-# Create extended listing file from ELF output file.
-%.lss: %.elf
- @echo
- @echo $(MSG_EXTENDED_LISTING) $@
- $(OBJDUMP) -h -S -z $< > $@
-
-# Create a symbol table from ELF output file.
-%.sym: %.elf
- @echo
- @echo $(MSG_SYMBOL_TABLE) $@
- $(NM) -n $< > $@
-
-
-
-# Create library from object files.
-.SECONDARY : $(TARGET).a
-.PRECIOUS : $(OBJ)
-%.a: $(OBJ)
- @echo
- @echo $(MSG_CREATING_LIBRARY) $@
- $(AR) $@ $(OBJ)
-
-
-# Link: create ELF output file from object files.
-.SECONDARY : $(TARGET).elf
-.PRECIOUS : $(OBJ)
-%.elf: $(OBJ)
- @echo
- @echo $(MSG_LINKING) $@
- $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
-
-
-# Compile: create object files from C source files.
-$(OBJDIR)/%.o : %.c
- @echo
- @echo $(MSG_COMPILING) $<
- $(CC) -c $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create object files from C++ source files.
-$(OBJDIR)/%.o : %.cpp
- @echo
- @echo $(MSG_COMPILING_CPP) $<
- $(CC) -c $(ALL_CPPFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C source files.
-%.s : %.c
- $(CC) -S $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C++ source files.
-%.s : %.cpp
- $(CC) -S $(ALL_CPPFLAGS) $< -o $@
-
-
-# Assemble: create object files from assembler source files.
-$(OBJDIR)/%.o : %.S
- @echo
- @echo $(MSG_ASSEMBLING) $<
- $(CC) -c $(ALL_ASFLAGS) $< -o $@
-
-
-# Create preprocessed source for use in sending a bug report.
-%.i : %.c
- $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
-
-
-# Target: clean project.
-clean: begin clean_list end
-
-clean_list :
- @echo
- @echo $(MSG_CLEANING)
- $(REMOVE) $(TARGET).hex
- $(REMOVE) $(TARGET).cof
- $(REMOVE) $(TARGET).elf
- $(REMOVE) $(TARGET).map
- $(REMOVE) $(TARGET).sym
- $(REMOVE) $(TARGET).lss
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
- $(REMOVE) $(SRC:.c=.s)
- $(REMOVE) $(SRC:.c=.d)
- $(REMOVE) $(SRC:.c=.i)
- $(REMOVEDIR) .dep
-
-doxygen:
- @echo Generating Project Documentation \($(TARGET)\)...
- @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
- exit 1; \
- fi;
- @echo Documentation Generation Complete.
-
-clean_doxygen:
- rm -rf Documentation
-
-checksource:
- @for f in $(SRC) $(CPPSRC) $(ASRC); do \
- if [ -f $$f ]; then \
- echo "Found Source File: $$f" ; \
- else \
- echo "Source File Not Found: $$f" ; \
- fi; done
-
-
-# Create object files directory
-$(shell mkdir $(OBJDIR) 2>/dev/null)
-
-
-# Include the dependency files.
--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
-
-
-# Listing of phony targets.
-.PHONY : all begin finish end sizebefore sizeafter gccversion \
-build elf hex lss sym doxygen clean clean_list clean_doxygen \
-dfu flip checksource
-
diff --git a/BuildTests/ModuleTest/makefile.xmega b/BuildTests/ModuleTest/makefile.xmega deleted file mode 100644 index 0a2f5014..00000000 --- a/BuildTests/ModuleTest/makefile.xmega +++ /dev/null @@ -1,733 +0,0 @@ -# Hey Emacs, this is a -*- makefile -*-
-#----------------------------------------------------------------------------
-# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
-# >> Modified for use with the LUFA project. <<
-#
-# Released to the Public Domain
-#
-# Additional material for this makefile was written by:
-# Peter Fleury
-# Tim Henigan
-# Colin O'Flynn
-# Reiner Patommel
-# Markus Pfaff
-# Sander Pool
-# Frederik Rouleau
-# Carlos Lamas
-# Dean Camera
-# Opendous Inc.
-# Denver Gingerich
-#
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device, using avrdude.
-# Please customize the avrdude settings below first!
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-# (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-# (must have Atmel FLIP installed).
-#
-# make doxygen = Generate DoxyGen documentation for the project (must have
-# DoxyGen installed)
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-# with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-
-# MCU name
-MCU = atxmega128a1u
-
-
-# Targeted chip architecture (see library "Architectures" documentation)
-ARCH = XMEGA
-
-
-# Target board (see library "Board Types" documentation, NONE for projects not requiring
-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
-# "Board" inside the application directory.
-BOARD = NONE
-
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This should be the frequency the system core runs at, after the system clock
-# has been set up correctly and started.
-F_CPU = 24000000
-
-
-# USB controller master clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency of the USB controller's clock generator in Hz.
-#
-# For the XMEGA chips, this should be equal to a multiple of 6MHz for Low
-# Speed USB mode, or a multiple of 48MHz for Full Speed USB mode.
-F_USB = 48000000
-
-
-# Output format. (can be srec, ihex, binary)
-FORMAT = ihex
-
-
-# Target file name (without extension).
-TARGET = Test
-
-
-# Object files directory
-# To put object files in current directory, use a dot (.), do NOT make
-# this an empty or blank macro!
-OBJDIR = .
-
-
-# Path to the LUFA library
-LUFA_PATH = ../..
-
-
-# LUFA library compile-time options and predefined tokens
-LUFA_OPTS =
-
-
-# Create the LUFA source path variables by including the LUFA root makefile
-include $(LUFA_PATH)/LUFA/makefile
-
-
-# List C source files here. (C dependencies are automatically generated.)
-SRC = Test_C.c \
- $(LUFA_SRC_USB) \
- $(LUFA_SRC_USBCLASS) \
- $(LUFA_SRC_SERIAL)
-
-
-# List C++ source files here. (C dependencies are automatically generated.)
-CPPSRC = Test_CPP.cpp
-
-
-# List Assembler source files here.
-# Make them always end in a capital .S. Files ending in a lowercase .s
-# will not be considered source files but generated files (assembler
-# output from the compiler), and will be deleted upon "make clean"!
-# Even though the DOS/Win* filesystem matches both .s and .S the same,
-# it will preserve the spelling of the filenames, and gcc itself does
-# care about how the name is spelled on its command-line.
-ASRC = Dummy.S
-
-
-# Optimization level, can be [0, 1, 2, 3, s].
-# 0 = turn off optimization. s = optimize for size.
-# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPT = 1
-
-
-# List any extra directories to look for include files here.
-# Each directory must be seperated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
-
-
-# Compiler flag to set the C Standard level.
-# c89 = "ANSI" C
-# gnu89 = c89 plus GCC extensions
-# c99 = ISO C99 standard (not yet fully implemented)
-# gnu99 = c99 plus GCC extensions
-CSTANDARD = -std=gnu99
-
-
-# Place -D or -U options here for C sources
-CDEFS = -DF_CPU=$(F_CPU)UL
-CDEFS += -DF_USB=$(F_USB)UL
-CDEFS += -DBOARD=BOARD_$(BOARD)
-CDEFS += -DARCH=ARCH_$(ARCH)
-CDEFS += $(LUFA_OPTS)
-
-
-# Place -D or -U options here for ASM sources
-ADEFS = -DF_CPU=$(F_CPU)
-ADEFS += -DF_USB=$(F_USB)UL
-ADEFS += -DBOARD=BOARD_$(BOARD)
-ADEFS += -DARCH=ARCH_$(ARCH)
-ADEFS += $(LUFA_OPTS)
-
-# Place -D or -U options here for C++ sources
-CPPDEFS = -DF_CPU=$(F_CPU)UL
-CPPDEFS += -DF_USB=$(F_USB)UL
-CPPDEFS += -DBOARD=BOARD_$(BOARD)
-CPPDEFS += -DARCH=ARCH_$(ARCH)
-CPPDEFS += $(LUFA_OPTS)
-
-
-# Debugging format.
-# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
-# AVR Studio 4.10 requires dwarf-2.
-# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
-DEBUG = dwarf-2
-
-
-#---------------- Compiler Options C ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CFLAGS = -g$(DEBUG)
-CFLAGS += $(CDEFS)
-CFLAGS += -O$(OPT)
-CFLAGS += -funsigned-char
-CFLAGS += -funsigned-bitfields
-CFLAGS += -ffunction-sections
-CFLAGS += -fno-inline-small-functions
-CFLAGS += -fpack-struct
-CFLAGS += -fshort-enums
-CFLAGS += -fno-strict-aliasing
-CFLAGS += -fno-split-wide-types
-#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-CFLAGS += $(CSTANDARD)
-CFLAGS += -Werror
-CFLAGS += -Wall
-CFLAGS += -Wextra
-CFLAGS += -Wstrict-prototypes
-CFLAGS += -Wformat=2
-CFLAGS += -Winit-self
-CFLAGS += -Wswitch-enum
-CFLAGS += -Wunused
-CFLAGS += -Wundef
-CFLAGS += -Wpointer-arith
-CFLAGS += -Wcast-align
-CFLAGS += -Wwrite-strings
-CFLAGS += -Wlogical-op
-CFLAGS += -Wmissing-parameter-type
-CFLAGS += -Wmissing-declarations
-CFLAGS += -Wmissing-field-initializers
-CFLAGS += -Wmissing-format-attribute
-CFLAGS += -Wredundant-decls
-CFLAGS += -Wnested-externs
-CFLAGS += -Woverlength-strings
-#CFLAGS += -Wswitch-default
-#CFLAGS += -Wc++-compat
-#CFLAGS += -Wcast-qual
-#CFLAGS += -Wconversion
-#CFLAGS += -Wjump-misses-init
-#CFLAGS += -pedantic
-
-
-#---------------- Compiler Options C++ ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CPPFLAGS = -g$(DEBUG)
-CPPFLAGS += $(CPPDEFS)
-CPPFLAGS += -O$(OPT)
-CPPFLAGS += -funsigned-char
-CPPFLAGS += -funsigned-bitfields
-CPPFLAGS += -fpack-struct
-CPPFLAGS += -fshort-enums
-CPPFLAGS += -ffunction-sections
-CPPFLAGS += -fno-strict-aliasing
-CPPFLAGS += -fno-exceptions
-CPPFLAGS += -Wall
-CPPFLAGS += -Wundef
-#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
-CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-#CPPFLAGS += $(CSTANDARD)
-
-
-#---------------- Assembler Options ----------------
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns: create listing
-# -gstabs: have the assembler create line number information; note that
-# for use in COFF files, additional information about filenames
-# and function names needs to be present in the assembler source
-# files -- see avr-libc docs [FIXME: not yet described there]
-# -listing-cont-lines: Sets the maximum number of continuation lines of hex
-# dump that will be displayed for a given single line of source input.
-ASFLAGS = $(ADEFS)
-#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
-
-
-#---------------- Library Options ----------------
-# Minimalistic printf version
-PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
-
-# Floating point printf version (requires MATH_LIB = -lm below)
-PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
-
-# If this is left blank, then it will use the Standard printf version.
-PRINTF_LIB =
-#PRINTF_LIB = $(PRINTF_LIB_MIN)
-#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
-
-
-# Minimalistic scanf version
-SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
-
-# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
-SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
-
-# If this is left blank, then it will use the Standard scanf version.
-SCANF_LIB =
-#SCANF_LIB = $(SCANF_LIB_MIN)
-#SCANF_LIB = $(SCANF_LIB_FLOAT)
-
-
-MATH_LIB = -lm
-
-
-# List any extra directories to look for libraries here.
-# Each directory must be seperated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRALIBDIRS =
-
-
-
-#---------------- External Memory Options ----------------
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# used for variables (.data/.bss) and heap (malloc()).
-#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# only used for heap (malloc()).
-#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
-
-EXTMEMOPTS =
-
-
-
-#---------------- Linker Options ----------------
-# -Wl,...: tell GCC to pass this to linker.
-# -Map: create map file
-# --cref: add cross reference to map file
-#LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
-LDFLAGS += -Wl,--relax
-LDFLAGS += -Wl,--gc-sections
-LDFLAGS += $(EXTMEMOPTS)
-LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
-LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
-#LDFLAGS += -T linker_script.x
-
-
-
-#---------------- Programming Options (avrdude) ----------------
-
-# Programming hardware
-# Type: avrdude -c ?
-# to get a full listing.
-#
-AVRDUDE_PROGRAMMER = jtagmkII
-
-# com1 = serial port. Use lpt1 to connect to parallel port.
-AVRDUDE_PORT = usb
-
-AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
-
-
-# Uncomment the following if you want avrdude's erase cycle counter.
-# Note that this counter needs to be initialized first using -Yn,
-# see avrdude manual.
-#AVRDUDE_ERASE_COUNTER = -y
-
-# Uncomment the following if you do /not/ wish a verification to be
-# performed after programming the device.
-#AVRDUDE_NO_VERIFY = -V
-
-# Increase verbosity level. Please use this when submitting bug
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
-# to submit bug reports.
-#AVRDUDE_VERBOSE = -v -v
-
-AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
-
-
-
-#---------------- Debugging Options ----------------
-
-# For simulavr only - target MCU frequency.
-DEBUG_MFREQ = $(F_CPU)
-
-# Set the DEBUG_UI to either gdb or insight.
-# DEBUG_UI = gdb
-DEBUG_UI = insight
-
-# Set the debugging back-end to either avarice, simulavr.
-DEBUG_BACKEND = avarice
-#DEBUG_BACKEND = simulavr
-
-# GDB Init Filename.
-GDBINIT_FILE = __avr_gdbinit
-
-# When using avarice settings for the JTAG
-JTAG_DEV = /dev/com1
-
-# Debugging port used to communicate between GDB / avarice / simulavr.
-DEBUG_PORT = 4242
-
-# Debugging host used to communicate between GDB / avarice / simulavr, normally
-# just set to localhost unless doing some sort of crazy debugging when
-# avarice is running on a different computer.
-DEBUG_HOST = localhost
-
-
-
-#============================================================================
-
-
-# Define programs and commands.
-SHELL = sh
-CC = avr-gcc
-OBJCOPY = avr-objcopy
-OBJDUMP = avr-objdump
-SIZE = avr-size
-AR = avr-ar rcs
-NM = avr-nm
-AVRDUDE = avrdude
-REMOVE = rm -f
-REMOVEDIR = rm -rf
-COPY = cp
-WINSHELL = cmd
-
-
-# Define Messages
-# English
-MSG_ERRORS_NONE = Errors: none
-MSG_BEGIN = -------- begin --------
-MSG_END = -------- end --------
-MSG_SIZE_BEFORE = Size before:
-MSG_SIZE_AFTER = Size after:
-MSG_COFF = Converting to AVR COFF:
-MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
-MSG_FLASH = Creating load file for Flash:
-MSG_EEPROM = Creating load file for EEPROM:
-MSG_EXTENDED_LISTING = Creating Extended Listing:
-MSG_SYMBOL_TABLE = Creating Symbol Table:
-MSG_LINKING = Linking:
-MSG_COMPILING = Compiling C:
-MSG_COMPILING_CPP = Compiling C++:
-MSG_ASSEMBLING = Assembling:
-MSG_CLEANING = Cleaning project:
-MSG_CREATING_LIBRARY = Creating library:
-
-
-
-
-# Define all object files.
-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
-
-# Define all listing files.
-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
-
-
-# Compiler flags to generate dependency files.
-#GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
-
-
-# Combine all necessary flags and optional flags.
-# Add target processor to flags.
-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
-ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
-
-
-
-
-
-# Default target.
-all: begin gccversion sizebefore build sizeafter end
-
-# Change the build target to build a HEX file or a library.
-build: elf hex eep lss sym
-#build: lib
-
-
-elf: $(TARGET).elf
-hex: $(TARGET).hex
-eep: $(TARGET).eep
-lss: $(TARGET).lss
-sym: $(TARGET).sym
-LIBNAME=lib$(TARGET).a
-lib: $(LIBNAME)
-
-
-
-# Eye candy.
-# AVR Studio 3.x does not check make's exit code but relies on
-# the following magic strings to be generated by the compile job.
-begin:
- @echo
- @echo $(MSG_BEGIN)
-
-end:
- @echo $(MSG_END)
- @echo
-
-
-# Display size of file.
-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
-ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
-MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
-FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
-
-
-sizebefore:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-sizeafter:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-
-
-# Display compiler version information.
-gccversion :
- @$(CC) --version
-
-
-# Program the device.
-program: $(TARGET).hex $(TARGET).eep
- $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- $(COPY) $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
- $(REMOVE) $(TARGET)eep.hex
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) eeprom-flash $(TARGET).eep
- dfu-programmer $(MCU) reset
-
-
-# Generate avr-gdb config/init file which does the following:
-# define the reset signal, load the target file, connect to target, and set
-# a breakpoint at main().
-gdb-config:
- @$(REMOVE) $(GDBINIT_FILE)
- @echo define reset >> $(GDBINIT_FILE)
- @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
- @echo end >> $(GDBINIT_FILE)
- @echo file $(TARGET).elf >> $(GDBINIT_FILE)
- @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
-ifeq ($(DEBUG_BACKEND),simulavr)
- @echo load >> $(GDBINIT_FILE)
-endif
- @echo break main >> $(GDBINIT_FILE)
-
-debug: gdb-config $(TARGET).elf
-ifeq ($(DEBUG_BACKEND), avarice)
- @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
- @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
- $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
- @$(WINSHELL) /c pause
-
-else
- @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
- $(DEBUG_MFREQ) --port $(DEBUG_PORT)
-endif
- @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
-
-
-
-
-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
-COFFCONVERT = $(OBJCOPY) --debugging
-COFFCONVERT += --change-section-address .data-0x800000
-COFFCONVERT += --change-section-address .bss-0x800000
-COFFCONVERT += --change-section-address .noinit-0x800000
-COFFCONVERT += --change-section-address .eeprom-0x810000
-
-
-
-coff: $(TARGET).elf
- @echo
- @echo $(MSG_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
-
-
-extcoff: $(TARGET).elf
- @echo
- @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
-
-
-
-# Create final output files (.hex, .eep) from ELF output file.
-%.hex: %.elf
- @echo
- @echo $(MSG_FLASH) $@
- $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@
-
-%.eep: %.elf
- @echo
- @echo $(MSG_EEPROM) $@
- -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
- --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
-
-# Create extended listing file from ELF output file.
-%.lss: %.elf
- @echo
- @echo $(MSG_EXTENDED_LISTING) $@
- $(OBJDUMP) -h -S -z $< > $@
-
-# Create a symbol table from ELF output file.
-%.sym: %.elf
- @echo
- @echo $(MSG_SYMBOL_TABLE) $@
- $(NM) -n $< > $@
-
-
-
-# Create library from object files.
-.SECONDARY : $(TARGET).a
-.PRECIOUS : $(OBJ)
-%.a: $(OBJ)
- @echo
- @echo $(MSG_CREATING_LIBRARY) $@
- $(AR) $@ $(OBJ)
-
-
-# Link: create ELF output file from object files.
-.SECONDARY : $(TARGET).elf
-.PRECIOUS : $(OBJ)
-%.elf: $(OBJ)
- @echo
- @echo $(MSG_LINKING) $@
- $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
-
-
-# Compile: create object files from C source files.
-$(OBJDIR)/%.o : %.c
- @echo
- @echo $(MSG_COMPILING) $<
- $(CC) -c $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create object files from C++ source files.
-$(OBJDIR)/%.o : %.cpp
- @echo
- @echo $(MSG_COMPILING_CPP) $<
- $(CC) -c $(ALL_CPPFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C source files.
-%.s : %.c
- $(CC) -S $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C++ source files.
-%.s : %.cpp
- $(CC) -S $(ALL_CPPFLAGS) $< -o $@
-
-
-# Assemble: create object files from assembler source files.
-$(OBJDIR)/%.o : %.S
- @echo
- @echo $(MSG_ASSEMBLING) $<
- $(CC) -c $(ALL_ASFLAGS) $< -o $@
-
-
-# Create preprocessed source for use in sending a bug report.
-%.i : %.c
- $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
-
-
-# Target: clean project.
-clean: begin clean_list end
-
-clean_list :
- @echo
- @echo $(MSG_CLEANING)
- $(REMOVE) $(TARGET).hex
- $(REMOVE) $(TARGET).eep
- $(REMOVE) $(TARGET).cof
- $(REMOVE) $(TARGET).elf
- $(REMOVE) $(TARGET).map
- $(REMOVE) $(TARGET).sym
- $(REMOVE) $(TARGET).lss
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
- $(REMOVE) $(SRC:.c=.s)
- $(REMOVE) $(SRC:.c=.d)
- $(REMOVE) $(SRC:.c=.i)
- $(REMOVEDIR) .dep
-
-doxygen:
- @echo Generating Project Documentation \($(TARGET)\)...
- @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
- exit 1; \
- fi;
- @echo Documentation Generation Complete.
-
-clean_doxygen:
- rm -rf Documentation
-
-checksource:
- @for f in $(SRC) $(CPPSRC) $(ASRC); do \
- if [ -f $$f ]; then \
- echo "Found Source File: $$f" ; \
- else \
- echo "Source File Not Found: $$f" ; \
- fi; done
-
-
-# Create object files directory
-$(shell mkdir $(OBJDIR) 2>/dev/null)
-
-
-# Include the dependency files.
--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
-
-
-# Listing of phony targets.
-.PHONY : all begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff doxygen clean \
-clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
-debug gdb-config checksource
diff --git a/BuildTests/SingleUSBModeTest/Dummy.S b/BuildTests/SingleUSBModeTest/Dummy.S index bc13b31e..0a176358 100644 --- a/BuildTests/SingleUSBModeTest/Dummy.S +++ b/BuildTests/SingleUSBModeTest/Dummy.S @@ -1,41 +1,42 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-.section .text
-
-
-# Mandatory entry point for successful compilation and link
-.global main
-main:
-
-
-# Mandatory callback needed for base compile of the USB driver
-.global CALLBACK_USB_GetDescriptor
-CALLBACK_USB_GetDescriptor:
+/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +.section .text + + +# Mandatory entry point for successful compilation and link +.global main +main: + # Force code generation of the base USB stack + call USB_Init + +# Mandatory callback needed for base compile of the USB driver +.global CALLBACK_USB_GetDescriptor +CALLBACK_USB_GetDescriptor: diff --git a/BuildTests/SingleUSBModeTest/Test.c b/BuildTests/SingleUSBModeTest/Test.c index e361b251..887344bb 100644 --- a/BuildTests/SingleUSBModeTest/Test.c +++ b/BuildTests/SingleUSBModeTest/Test.c @@ -1,32 +1,32 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include <LUFA/Common/Common.h>
-#include <LUFA/Drivers/USB/USB.h>
+/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include <LUFA/Common/Common.h> +#include <LUFA/Drivers/USB/USB.h> diff --git a/BuildTests/SingleUSBModeTest/makefile b/BuildTests/SingleUSBModeTest/makefile index 82ed94a7..bef8a5c7 100644 --- a/BuildTests/SingleUSBModeTest/makefile +++ b/BuildTests/SingleUSBModeTest/makefile @@ -1,45 +1,56 @@ -#
-# LUFA Library
-# Copyright (C) Dean Camera, 2012.
-#
-# dean [at] fourwalledcubicle [dot] com
-# www.lufa-lib.org
-#
-
-# Makefile for the module build test. This test
-# attempts to build as many modules as possible
-# under all supported architectures, and include
-# all module headers in a simple C and C++
-# application.
-
-all: begin compile clean end
-
-begin:
- @echo Executing build test "SingleUSBModeTest".
- @echo
-
-end:
- @echo Build test "SingleUSBModeTest" complete.
- @echo
-
-compile:
- $(MAKE) -s -f makefile.avr8 clean
- $(MAKE) -s -f makefile.avr8 LUFA_OPTS='-D USB_DEVICE_ONLY' elf
- $(MAKE) -s -f makefile.avr8 clean
- $(MAKE) -s -f makefile.avr8 LUFA_OPTS='-D USB_HOST_ONLY' elf
-
- $(MAKE) -s -f makefile.xmega clean
- $(MAKE) -s -f makefile.xmega LUFA_OPTS='-D USB_DEVICE_ONLY' elf
-
- $(MAKE) -s -f makefile.uc3 clean
- $(MAKE) -s -f makefile.uc3 LUFA_OPTS='-D USB_DEVICE_ONLY' elf
- $(MAKE) -s -f makefile.uc3 clean
- $(MAKE) -s -f makefile.uc3 LUFA_OPTS='-D USB_HOST_ONLY' elf
-
-clean:
- $(MAKE) -s -f makefile.avr8 clean
- $(MAKE) -s -f makefile.xmega clean
- $(MAKE) -s -f makefile.uc3 clean
-
-%:
-
\ No newline at end of file +# +# LUFA Library +# Copyright (C) Dean Camera, 2012. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# + +# Makefile for the single USB mode build test. +# This test attempts to build the USB module +# under fixed device and fixed host modes under +# all supported architectures + +# Path to the LUFA library core +LUFA_PATH := ../../LUFA/ + +# Build test cannot be run with multiple parallel jobs +.NOTPARALLEL: + +all: begin compile clean end + +begin: + @echo Executing build test "SingleUSBModeTest". + @echo + +end: + @echo Build test "SingleUSBModeTest" complete. + @echo + +compile: + @echo Building SingleUSBModeTest for ARCH=AVR8 in device only mode... + $(MAKE) -f makefile.test clean elf ARCH=AVR8 MCU=at90usb1287 CC_FLAGS='-D USB_DEVICE_ONLY' + + @echo Building SingleUSBModeTest for ARCH=AVR8 in host only mode... + $(MAKE) -f makefile.test clean elf ARCH=AVR8 MCU=at90usb1287 CC_FLAGS='-D USB_HOST_ONLY' + + @echo Building SingleUSBModeTest for ARCH=XMEGA in device only mode... + $(MAKE) -f makefile.test clean elf ARCH=XMEGA MCU=atxmega128a1u CC_FLAGS='-D USB_DEVICE_ONLY' + + @echo Building SingleUSBModeTest for ARCH=UC3 in device only mode... + $(MAKE) -f makefile.test clean elf ARCH=UC3 MCU=uc3a0256 CC_FLAGS='-D USB_DEVICE_ONLY' + + @echo Building SingleUSBModeTest for ARCH=UC3 in host only mode... + $(MAKE) -f makefile.test clean elf ARCH=UC3 MCU=uc3a0256 CC_FLAGS='-D USB_HOST_ONLY' + +clean: + $(MAKE) -f makefile.test clean ARCH=AVR8 MCU=at90usb1287 + $(MAKE) -f makefile.test clean ARCH=XMEGA MCU=atxmega128a1u + $(MAKE) -f makefile.test clean ARCH=UC3 MCU=uc3a0256 + +%: + +.PHONY: begin end compile clean + +# Include LUFA build script makefiles +include $(LUFA_PATH)/Build/lufa_core.mk diff --git a/BuildTests/SingleUSBModeTest/makefile.avr8 b/BuildTests/SingleUSBModeTest/makefile.avr8 deleted file mode 100644 index d38b0e12..00000000 --- a/BuildTests/SingleUSBModeTest/makefile.avr8 +++ /dev/null @@ -1,724 +0,0 @@ -# Hey Emacs, this is a -*- makefile -*-
-#----------------------------------------------------------------------------
-# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
-# >> Modified for use with the LUFA project. <<
-#
-# Released to the Public Domain
-#
-# Additional material for this makefile was written by:
-# Peter Fleury
-# Tim Henigan
-# Colin O'Flynn
-# Reiner Patommel
-# Markus Pfaff
-# Sander Pool
-# Frederik Rouleau
-# Carlos Lamas
-# Dean Camera
-# Opendous Inc.
-# Denver Gingerich
-#
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device, using avrdude.
-# Please customize the avrdude settings below first!
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-# (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-# (must have Atmel FLIP installed).
-#
-# make doxygen = Generate DoxyGen documentation for the project (must have
-# DoxyGen installed)
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-# with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-
-# MCU name
-MCU = at90usb1287
-
-
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-
-# Target board (see library "Board Types" documentation, NONE for projects not requiring
-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
-# "Board" inside the application directory.
-BOARD = NONE
-
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-
-# Output format. (can be srec, ihex, binary)
-FORMAT = ihex
-
-
-# Target file name (without extension).
-TARGET = Test
-
-
-# Object files directory
-# To put object files in current directory, use a dot (.), do NOT make
-# this an empty or blank macro!
-OBJDIR = .
-
-
-# Path to the LUFA library
-LUFA_PATH = ../..
-
-
-# LUFA library compile-time options and predefined tokens
-LUFA_OPTS =
-
-
-# Create the LUFA source path variables by including the LUFA root makefile
-include $(LUFA_PATH)/LUFA/makefile
-
-
-# List C source files here. (C dependencies are automatically generated.)
-SRC = Test.c \
- $(LUFA_SRC_USB)
-
-
-
-# List C++ source files here. (C dependencies are automatically generated.)
-CPPSRC =
-
-
-# List Assembler source files here.
-# Make them always end in a capital .S. Files ending in a lowercase .s
-# will not be considered source files but generated files (assembler
-# output from the compiler), and will be deleted upon "make clean"!
-# Even though the DOS/Win* filesystem matches both .s and .S the same,
-# it will preserve the spelling of the filenames, and gcc itself does
-# care about how the name is spelled on its command-line.
-ASRC = Dummy.S
-
-
-# Optimization level, can be [0, 1, 2, 3, s].
-# 0 = turn off optimization. s = optimize for size.
-# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPT = 1
-
-
-# Debugging format.
-# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
-# AVR Studio 4.10 requires dwarf-2.
-# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
-DEBUG = dwarf-2
-
-
-# List any extra directories to look for include files here.
-# Each directory must be seperated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
-
-
-# Compiler flag to set the C Standard level.
-# c89 = "ANSI" C
-# gnu89 = c89 plus GCC extensions
-# c99 = ISO C99 standard (not yet fully implemented)
-# gnu99 = c99 plus GCC extensions
-CSTANDARD = -std=c99
-
-
-# Place -D or -U options here for C sources
-CDEFS = -DF_CPU=$(F_CPU)UL
-CDEFS += -DF_USB=$(F_USB)UL
-CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
-CDEFS += $(LUFA_OPTS)
-
-
-# Place -D or -U options here for ASM sources
-ADEFS = -DF_CPU=$(F_CPU)
-ADEFS += -DF_USB=$(F_USB)UL
-ADEFS += -DBOARD=BOARD_$(BOARD)
-ADEFS += $(LUFA_OPTS)
-
-# Place -D or -U options here for C++ sources
-CPPDEFS = -DF_CPU=$(F_CPU)UL
-CPPDEFS += -DF_USB=$(F_USB)UL
-CPPDEFS += -DBOARD=BOARD_$(BOARD)
-CPPDEFS += $(LUFA_OPTS)
-#CPPDEFS += -D__STDC_LIMIT_MACROS
-#CPPDEFS += -D__STDC_CONSTANT_MACROS
-
-
-
-#---------------- Compiler Options C ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CFLAGS = -g$(DEBUG)
-CFLAGS += $(CDEFS)
-CFLAGS += -O$(OPT)
-CFLAGS += -funsigned-char
-CFLAGS += -funsigned-bitfields
-CFLAGS += -ffunction-sections
-CFLAGS += -fno-inline-small-functions
-CFLAGS += -fpack-struct
-CFLAGS += -fshort-enums
-CFLAGS += -fno-strict-aliasing
-CFLAGS += -fno-split-wide-types
-CFLAGS += -Wall
-CFLAGS += -Wstrict-prototypes
-#CFLAGS += -mshort-calls
-#CFLAGS += -fno-unit-at-a-time
-#CFLAGS += -Wundef
-#CFLAGS += -Wunreachable-code
-#CFLAGS += -Wsign-compare
-#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-CFLAGS += $(CSTANDARD)
-
-
-#---------------- Compiler Options C++ ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CPPFLAGS = -g$(DEBUG)
-CPPFLAGS += $(CPPDEFS)
-CPPFLAGS += -O$(OPT)
-CPPFLAGS += -funsigned-char
-CPPFLAGS += -funsigned-bitfields
-CPPFLAGS += -fpack-struct
-CPPFLAGS += -fshort-enums
-CPPFLAGS += -fno-exceptions
-CPPFLAGS += -Wall
-CPPFLAGS += -Wundef
-#CPPFLAGS += -mshort-calls
-#CPPFLAGS += -fno-unit-at-a-time
-#CPPFLAGS += -Wstrict-prototypes
-#CPPFLAGS += -Wunreachable-code
-#CPPFLAGS += -Wsign-compare
-#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
-CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-#CPPFLAGS += $(CSTANDARD)
-
-
-#---------------- Assembler Options ----------------
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns: create listing
-# -gstabs: have the assembler create line number information; note that
-# for use in COFF files, additional information about filenames
-# and function names needs to be present in the assembler source
-# files -- see avr-libc docs [FIXME: not yet described there]
-# -listing-cont-lines: Sets the maximum number of continuation lines of hex
-# dump that will be displayed for a given single line of source input.
-ASFLAGS = $(ADEFS)
-#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
-
-
-#---------------- Library Options ----------------
-# Minimalistic printf version
-PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
-
-# Floating point printf version (requires MATH_LIB = -lm below)
-PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
-
-# If this is left blank, then it will use the Standard printf version.
-PRINTF_LIB =
-#PRINTF_LIB = $(PRINTF_LIB_MIN)
-#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
-
-
-# Minimalistic scanf version
-SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
-
-# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
-SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
-
-# If this is left blank, then it will use the Standard scanf version.
-SCANF_LIB =
-#SCANF_LIB = $(SCANF_LIB_MIN)
-#SCANF_LIB = $(SCANF_LIB_FLOAT)
-
-
-MATH_LIB = -lm
-
-
-# List any extra directories to look for libraries here.
-# Each directory must be seperated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRALIBDIRS =
-
-
-
-#---------------- External Memory Options ----------------
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# used for variables (.data/.bss) and heap (malloc()).
-#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# only used for heap (malloc()).
-#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
-
-EXTMEMOPTS =
-
-
-
-#---------------- Linker Options ----------------
-# -Wl,...: tell GCC to pass this to linker.
-# -Map: create map file
-# --cref: add cross reference to map file
-#LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
-LDFLAGS += -Wl,--relax
-LDFLAGS += -Wl,--gc-sections
-LDFLAGS += $(EXTMEMOPTS)
-LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
-LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
-#LDFLAGS += -T linker_script.x
-
-
-
-#---------------- Programming Options (avrdude) ----------------
-
-# Programming hardware
-# Type: avrdude -c ?
-# to get a full listing.
-#
-AVRDUDE_PROGRAMMER = jtagmkII
-
-# com1 = serial port. Use lpt1 to connect to parallel port.
-AVRDUDE_PORT = usb
-
-AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
-
-
-# Uncomment the following if you want avrdude's erase cycle counter.
-# Note that this counter needs to be initialized first using -Yn,
-# see avrdude manual.
-#AVRDUDE_ERASE_COUNTER = -y
-
-# Uncomment the following if you do /not/ wish a verification to be
-# performed after programming the device.
-#AVRDUDE_NO_VERIFY = -V
-
-# Increase verbosity level. Please use this when submitting bug
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
-# to submit bug reports.
-#AVRDUDE_VERBOSE = -v -v
-
-AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
-
-
-
-#---------------- Debugging Options ----------------
-
-# For simulavr only - target MCU frequency.
-DEBUG_MFREQ = $(F_CPU)
-
-# Set the DEBUG_UI to either gdb or insight.
-# DEBUG_UI = gdb
-DEBUG_UI = insight
-
-# Set the debugging back-end to either avarice, simulavr.
-DEBUG_BACKEND = avarice
-#DEBUG_BACKEND = simulavr
-
-# GDB Init Filename.
-GDBINIT_FILE = __avr_gdbinit
-
-# When using avarice settings for the JTAG
-JTAG_DEV = /dev/com1
-
-# Debugging port used to communicate between GDB / avarice / simulavr.
-DEBUG_PORT = 4242
-
-# Debugging host used to communicate between GDB / avarice / simulavr, normally
-# just set to localhost unless doing some sort of crazy debugging when
-# avarice is running on a different computer.
-DEBUG_HOST = localhost
-
-
-
-#============================================================================
-
-
-# Define programs and commands.
-SHELL = sh
-CC = avr-gcc
-OBJCOPY = avr-objcopy
-OBJDUMP = avr-objdump
-SIZE = avr-size
-AR = avr-ar rcs
-NM = avr-nm
-AVRDUDE = avrdude
-REMOVE = rm -f
-REMOVEDIR = rm -rf
-COPY = cp
-WINSHELL = cmd
-
-
-# Define Messages
-# English
-MSG_ERRORS_NONE = Errors: none
-MSG_BEGIN = -------- begin --------
-MSG_END = -------- end --------
-MSG_SIZE_BEFORE = Size before:
-MSG_SIZE_AFTER = Size after:
-MSG_COFF = Converting to AVR COFF:
-MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
-MSG_FLASH = Creating load file for Flash:
-MSG_EEPROM = Creating load file for EEPROM:
-MSG_EXTENDED_LISTING = Creating Extended Listing:
-MSG_SYMBOL_TABLE = Creating Symbol Table:
-MSG_LINKING = Linking:
-MSG_COMPILING = Compiling C:
-MSG_COMPILING_CPP = Compiling C++:
-MSG_ASSEMBLING = Assembling:
-MSG_CLEANING = Cleaning project:
-MSG_CREATING_LIBRARY = Creating library:
-
-
-
-
-# Define all object files.
-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
-
-# Define all listing files.
-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
-
-
-# Compiler flags to generate dependency files.
-#GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
-
-
-# Combine all necessary flags and optional flags.
-# Add target processor to flags.
-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
-ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
-
-
-
-
-
-# Default target.
-all: begin gccversion sizebefore build sizeafter end
-
-# Change the build target to build a HEX file or a library.
-build: elf hex eep lss sym
-#build: lib
-
-
-elf: $(TARGET).elf
-hex: $(TARGET).hex
-eep: $(TARGET).eep
-lss: $(TARGET).lss
-sym: $(TARGET).sym
-LIBNAME=lib$(TARGET).a
-lib: $(LIBNAME)
-
-
-
-# Eye candy.
-# AVR Studio 3.x does not check make's exit code but relies on
-# the following magic strings to be generated by the compile job.
-begin:
- @echo
- @echo $(MSG_BEGIN)
-
-end:
- @echo $(MSG_END)
- @echo
-
-
-# Display size of file.
-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
-ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
-MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
-FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
-
-
-sizebefore:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-sizeafter:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-
-
-# Display compiler version information.
-gccversion :
- @$(CC) --version
-
-
-# Program the device.
-program: $(TARGET).hex $(TARGET).eep
- $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- $(COPY) $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
- $(REMOVE) $(TARGET)eep.hex
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) eeprom-flash $(TARGET).eep
- dfu-programmer $(MCU) reset
-
-
-# Generate avr-gdb config/init file which does the following:
-# define the reset signal, load the target file, connect to target, and set
-# a breakpoint at main().
-gdb-config:
- @$(REMOVE) $(GDBINIT_FILE)
- @echo define reset >> $(GDBINIT_FILE)
- @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
- @echo end >> $(GDBINIT_FILE)
- @echo file $(TARGET).elf >> $(GDBINIT_FILE)
- @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
-ifeq ($(DEBUG_BACKEND),simulavr)
- @echo load >> $(GDBINIT_FILE)
-endif
- @echo break main >> $(GDBINIT_FILE)
-
-debug: gdb-config $(TARGET).elf
-ifeq ($(DEBUG_BACKEND), avarice)
- @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
- @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
- $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
- @$(WINSHELL) /c pause
-
-else
- @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
- $(DEBUG_MFREQ) --port $(DEBUG_PORT)
-endif
- @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
-
-
-
-
-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
-COFFCONVERT = $(OBJCOPY) --debugging
-COFFCONVERT += --change-section-address .data-0x800000
-COFFCONVERT += --change-section-address .bss-0x800000
-COFFCONVERT += --change-section-address .noinit-0x800000
-COFFCONVERT += --change-section-address .eeprom-0x810000
-
-
-
-coff: $(TARGET).elf
- @echo
- @echo $(MSG_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
-
-
-extcoff: $(TARGET).elf
- @echo
- @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
-
-
-
-# Create final output files (.hex, .eep) from ELF output file.
-%.hex: %.elf
- @echo
- @echo $(MSG_FLASH) $@
- $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@
-
-%.eep: %.elf
- @echo
- @echo $(MSG_EEPROM) $@
- -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
- --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
-
-# Create extended listing file from ELF output file.
-%.lss: %.elf
- @echo
- @echo $(MSG_EXTENDED_LISTING) $@
- $(OBJDUMP) -h -S -z $< > $@
-
-# Create a symbol table from ELF output file.
-%.sym: %.elf
- @echo
- @echo $(MSG_SYMBOL_TABLE) $@
- $(NM) -n $< > $@
-
-
-
-# Create library from object files.
-.SECONDARY : $(TARGET).a
-.PRECIOUS : $(OBJ)
-%.a: $(OBJ)
- @echo
- @echo $(MSG_CREATING_LIBRARY) $@
- $(AR) $@ $(OBJ)
-
-
-# Link: create ELF output file from object files.
-.SECONDARY : $(TARGET).elf
-.PRECIOUS : $(OBJ)
-%.elf: $(OBJ)
- @echo
- @echo $(MSG_LINKING) $@
- $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
-
-
-# Compile: create object files from C source files.
-$(OBJDIR)/%.o : %.c
- @echo
- @echo $(MSG_COMPILING) $<
- $(CC) -c $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create object files from C++ source files.
-$(OBJDIR)/%.o : %.cpp
- @echo
- @echo $(MSG_COMPILING_CPP) $<
- $(CC) -c $(ALL_CPPFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C source files.
-%.s : %.c
- $(CC) -S $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C++ source files.
-%.s : %.cpp
- $(CC) -S $(ALL_CPPFLAGS) $< -o $@
-
-
-# Assemble: create object files from assembler source files.
-$(OBJDIR)/%.o : %.S
- @echo
- @echo $(MSG_ASSEMBLING) $<
- $(CC) -c $(ALL_ASFLAGS) $< -o $@
-
-
-# Create preprocessed source for use in sending a bug report.
-%.i : %.c
- $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
-
-
-# Target: clean project.
-clean: begin clean_list end
-
-clean_list :
- @echo
- @echo $(MSG_CLEANING)
- $(REMOVE) $(TARGET).hex
- $(REMOVE) $(TARGET).eep
- $(REMOVE) $(TARGET).cof
- $(REMOVE) $(TARGET).elf
- $(REMOVE) $(TARGET).map
- $(REMOVE) $(TARGET).sym
- $(REMOVE) $(TARGET).lss
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
- $(REMOVE) $(SRC:.c=.s)
- $(REMOVE) $(SRC:.c=.d)
- $(REMOVE) $(SRC:.c=.i)
- $(REMOVEDIR) .dep
-
-doxygen:
- @echo Generating Project Documentation \($(TARGET)\)...
- @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
- exit 1; \
- fi;
- @echo Documentation Generation Complete.
-
-clean_doxygen:
- rm -rf Documentation
-
-checksource:
- @for f in $(SRC) $(CPPSRC) $(ASRC); do \
- if [ -f $$f ]; then \
- echo "Found Source File: $$f" ; \
- else \
- echo "Source File Not Found: $$f" ; \
- fi; done
-
-
-# Create object files directory
-$(shell mkdir $(OBJDIR) 2>/dev/null)
-
-
-# Include the dependency files.
--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
-
-
-# Listing of phony targets.
-.PHONY : all begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff doxygen clean \
-clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
-debug gdb-config checksource
diff --git a/BuildTests/SingleUSBModeTest/makefile.test b/BuildTests/SingleUSBModeTest/makefile.test new file mode 100644 index 00000000..278780f1 --- /dev/null +++ b/BuildTests/SingleUSBModeTest/makefile.test @@ -0,0 +1,67 @@ +# +# LUFA Library +# Copyright (C) Dean Camera, 2012. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# +# -------------------------------------- +# LUFA Project Makefile. +# -------------------------------------- + +MCU = +ARCH = +BOARD = NONE +F_CPU = $(F_USB) +DEBUG_LEVEL = 0 + +ifeq ($(ARCH), AVR8) + F_USB = 8000000 +else ifeq ($(ARCH), XMEGA) + F_USB = 48000000 +else ifeq ($(ARCH), UC3) + F_USB = 48000000 +endif + +OPTIMIZATION = 1 +TARGET = Test +SRC = Test.c Dummy.S $(LUFA_SRC_USB) +LUFA_PATH = ../../LUFA + +# Generic C/C++ compiler flags +CC_FLAGS = -Wextra +CC_FLAGS += -Werror +CC_FLAGS += -Wformat=2 +CC_FLAGS += -Winit-self +CC_FLAGS += -Wswitch-enum +CC_FLAGS += -Wunused +CC_FLAGS += -Wundef +CC_FLAGS += -Wpointer-arith +CC_FLAGS += -Wcast-align +CC_FLAGS += -Wwrite-strings +CC_FLAGS += -Wlogical-op +CC_FLAGS += -Wmissing-declarations +CC_FLAGS += -Wmissing-field-initializers +CC_FLAGS += -Wmissing-format-attribute +CC_FLAGS += -Woverlength-strings + +# Only enable rendundant declaration warnings for AVR8 target (FIXME) +ifeq ($(ARCH), AVR8) + CC_FLAGS += -Wredundant-decls +endif + +# C compiler only flags +C_FLAGS += -Wmissing-parameter-type +C_FLAGS += -Wnested-externs + +# Potential additional warnings to enable in the future (FIXME) +#CC_FLAGS += -Wswitch-default +#CC_FLAGS += -Wc++-compat +#CC_FLAGS += -Wcast-qual +#CC_FLAGS += -Wconversion +#CC_FLAGS += -Wjump-misses-init +#CC_FLAGS += -pedantic + +# Include LUFA build script makefiles +include $(LUFA_PATH)/Build/lufa_sources.mk +include $(LUFA_PATH)/Build/lufa_build.mk
\ No newline at end of file diff --git a/BuildTests/SingleUSBModeTest/makefile.uc3 b/BuildTests/SingleUSBModeTest/makefile.uc3 deleted file mode 100644 index b86bb886..00000000 --- a/BuildTests/SingleUSBModeTest/makefile.uc3 +++ /dev/null @@ -1,487 +0,0 @@ -# Hey Emacs, this is a -*- makefile -*-
-#----------------------------------------------------------------------------
-# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
-# >> Modified for use with the LUFA project. <<
-#
-# Released to the Public Domain
-#
-# Additional material for this makefile was written by:
-# Peter Fleury
-# Tim Henigan
-# Colin O'Flynn
-# Reiner Patommel
-# Markus Pfaff
-# Sander Pool
-# Frederik Rouleau
-# Carlos Lamas
-# Dean Camera
-# Opendous Inc.
-# Denver Gingerich
-#
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make doxygen = Generate DoxyGen documentation for the project (must have
-# DoxyGen installed)
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-
-# MCU name
-MCU = uc3a3256
-
-
-# Targeted chip architecture (see library "Architectures" documentation)
-ARCH = UC3
-
-
-# Target board (see library "Board Types" documentation, NONE for projects not requiring
-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
-# "Board" inside the application directory.
-BOARD = NONE
-
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This should be the frequency the system core runs at, after the system clock
-# has been set up correctly and started.
-F_CPU = 12000000
-
-
-# USB controller master clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency of the USB controller's clock generator in Hz.
-#
-# For the UC3 chips, this should be equal to 48MHz or 96MHz.
-F_USB = 48000000
-
-
-# Output format. (can be srec, ihex, binary)
-FORMAT = ihex
-
-
-# Target file name (without extension).
-TARGET = Test
-
-
-# Object files directory
-# To put object files in current directory, use a dot (.), do NOT make
-# this an empty or blank macro!
-OBJDIR = .
-
-
-# Path to the LUFA library
-LUFA_PATH = ../..
-
-
-# LUFA library compile-time options and predefined tokens (add '-D' before each token)
-LUFA_OPTS =
-
-
-# Create the LUFA source path variables by including the LUFA root makefile
-include $(LUFA_PATH)/LUFA/makefile
-
-
-# List C source files here. (C dependencies are automatically generated.)
-SRC = Test.c \
- $(LUFA_SRC_USB)
-
-
-# List C++ source files here. (C dependencies are automatically generated.)
-CPPSRC =
-
-
-# List Assembler source files here.
-# Make them always end in a capital .S. Files ending in a lowercase .s
-# will not be considered source files but generated files (assembler
-# output from the compiler), and will be deleted upon "make clean"!
-# Even though the DOS/Win* filesystem matches both .s and .S the same,
-# it will preserve the spelling of the filenames, and gcc itself does
-# care about how the name is spelled on its command-line.
-ASRC = Dummy.S
-
-
-# Optimization level, can be [0, 1, 2, 3, s].
-# 0 = turn off optimization. s = optimize for size.
-# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPT = 1
-
-
-# List any extra directories to look for include files here.
-# Each directory must be seperated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
-
-
-# Compiler flag to set the C Standard level.
-# c89 = "ANSI" C
-# gnu89 = c89 plus GCC extensions
-# c99 = ISO C99 standard (not yet fully implemented)
-# gnu99 = c99 plus GCC extensions
-CSTANDARD = -std=gnu99
-
-
-# Place -D or -U options here for C sources
-CDEFS = -DF_CPU=$(F_CPU)UL
-CDEFS += -DF_USB=$(F_USB)UL
-CDEFS += -DBOARD=BOARD_$(BOARD)
-CDEFS += -DARCH=ARCH_$(ARCH)
-CDEFS += $(LUFA_OPTS)
-
-
-# Place -D or -U options here for ASM sources
-ADEFS = -DF_CPU=$(F_CPU)
-ADEFS += -DF_USB=$(F_USB)UL
-ADEFS += -DBOARD=BOARD_$(BOARD)
-ADEFS += -DARCH=ARCH_$(ARCH)
-ADEFS += $(LUFA_OPTS)
-
-# Place -D or -U options here for C++ sources
-CPPDEFS = -DF_CPU=$(F_CPU)UL
-CPPDEFS += -DF_USB=$(F_USB)UL
-CPPDEFS += -DBOARD=BOARD_$(BOARD)
-CPPDEFS += -DARCH=ARCH_$(ARCH)
-CPPDEFS += $(LUFA_OPTS)
-
-
-# Debugging level.
-DEBUG = 3
-
-
-#---------------- Compiler Options C ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CFLAGS = -g$(DEBUG)
-CFLAGS += $(CDEFS)
-CFLAGS += -O$(OPT)
-CFLAGS += -funsigned-char
-CFLAGS += -funsigned-bitfields
-CFLAGS += -ffunction-sections
-CFLAGS += -fno-strict-aliasing
-CFLAGS += -Wall
-CFLAGS += -Wstrict-prototypes
-CFLAGS += -masm-addr-pseudos
-#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-CFLAGS += $(CSTANDARD)
-
-
-#---------------- Compiler Options C++ ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CPPFLAGS = -g$(DEBUG)
-CPPFLAGS += $(CPPDEFS)
-CPPFLAGS += -O$(OPT)
-CPPFLAGS += -funsigned-char
-CPPFLAGS += -funsigned-bitfields
-CPPFLAGS += -ffunction-sections
-CPPFLAGS += -fno-strict-aliasing
-CPPFLAGS += -fno-exceptions
-CPPFLAGS += -masm-addr-pseudos
-CPPFLAGS += -Wall
-CPPFLAGS += -Wundef
-#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
-CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-#CPPFLAGS += $(CSTANDARD)
-
-
-#---------------- Assembler Options ----------------
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns: create listing
-# -gstabs: have the assembler create line number information; note that
-# for use in COFF files, additional information about filenames
-# and function names needs to be present in the assembler source
-# files -- see avr-libc docs [FIXME: not yet described there]
-# -listing-cont-lines: Sets the maximum number of continuation lines of hex
-# dump that will be displayed for a given single line of source input.
-ASFLAGS = $(ADEFS)
-#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
-
-
-#---------------- Linker Options ----------------
-# -Wl,...: tell GCC to pass this to linker.
-# -Map: create map file
-# --cref: add cross reference to map file
-#LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
-LDFLAGS += -Wl,--gc-sections --rodata-writable
-LDFLAGS += -Wl,--direct-data
-#LDFLAGS += -T linker_script.x
-
-
-#============================================================================
-
-
-# Define programs and commands.
-SHELL = sh
-CC = avr32-gcc
-OBJCOPY = avr32-objcopy
-OBJDUMP = avr32-objdump
-SIZE = avr32-size
-AR = avr32-ar rcs
-NM = avr32-nm
-REMOVE = rm -f
-REMOVEDIR = rm -rf
-COPY = cp
-WINSHELL = cmd
-
-
-# Define Messages
-# English
-MSG_ERRORS_NONE = Errors: none
-MSG_BEGIN = -------- begin --------
-MSG_END = -------- end --------
-MSG_SIZE_BEFORE = Size before:
-MSG_SIZE_AFTER = Size after:
-MSG_COFF = Converting to AVR COFF:
-MSG_FLASH = Creating load file for Flash:
-MSG_EEPROM = Creating load file for EEPROM:
-MSG_EXTENDED_LISTING = Creating Extended Listing:
-MSG_SYMBOL_TABLE = Creating Symbol Table:
-MSG_LINKING = Linking:
-MSG_COMPILING = Compiling C:
-MSG_COMPILING_CPP = Compiling C++:
-MSG_ASSEMBLING = Assembling:
-MSG_CLEANING = Cleaning project:
-MSG_CREATING_LIBRARY = Creating library:
-
-
-
-
-# Define all object files.
-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
-
-# Define all listing files.
-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
-
-
-# Compiler flags to generate dependency files.
-#GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
-
-
-# Combine all necessary flags and optional flags.
-# Add target processor to flags.
-ALL_CFLAGS = -mpart=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
-ALL_CPPFLAGS = -mpart=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
-ALL_ASFLAGS = -mpart=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
-
-
-
-
-
-# Default target.
-all: begin gccversion sizebefore build sizeafter end
-
-# Change the build target to build a HEX file or a library.
-build: elf hex lss sym
-#build: lib
-
-
-elf: $(TARGET).elf
-hex: $(TARGET).hex
-lss: $(TARGET).lss
-sym: $(TARGET).sym
-LIBNAME=lib$(TARGET).a
-lib: $(LIBNAME)
-
-
-
-# Eye candy.
-# AVR Studio 3.x does not check make's exit code but relies on
-# the following magic strings to be generated by the compile job.
-begin:
- @echo
- @echo $(MSG_BEGIN)
-
-end:
- @echo $(MSG_END)
- @echo
-
-
-# Display size of file.
-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
-ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
-MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
-FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
-
-
-sizebefore:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-sizeafter:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-
-
-# Display compiler version information.
-gccversion :
- @$(CC) --version
-
-
-# Program the device.
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-
-# Create final output files (.hex, .eep) from ELF output file.
-%.hex: %.elf
- @echo
- @echo $(MSG_FLASH) $@
- $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@
-
-# Create extended listing file from ELF output file.
-%.lss: %.elf
- @echo
- @echo $(MSG_EXTENDED_LISTING) $@
- $(OBJDUMP) -h -S -z $< > $@
-
-# Create a symbol table from ELF output file.
-%.sym: %.elf
- @echo
- @echo $(MSG_SYMBOL_TABLE) $@
- $(NM) -n $< > $@
-
-
-
-# Create library from object files.
-.SECONDARY : $(TARGET).a
-.PRECIOUS : $(OBJ)
-%.a: $(OBJ)
- @echo
- @echo $(MSG_CREATING_LIBRARY) $@
- $(AR) $@ $(OBJ)
-
-
-# Link: create ELF output file from object files.
-.SECONDARY : $(TARGET).elf
-.PRECIOUS : $(OBJ)
-%.elf: $(OBJ)
- @echo
- @echo $(MSG_LINKING) $@
- $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
-
-
-# Compile: create object files from C source files.
-$(OBJDIR)/%.o : %.c
- @echo
- @echo $(MSG_COMPILING) $<
- $(CC) -c $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create object files from C++ source files.
-$(OBJDIR)/%.o : %.cpp
- @echo
- @echo $(MSG_COMPILING_CPP) $<
- $(CC) -c $(ALL_CPPFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C source files.
-%.s : %.c
- $(CC) -S $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C++ source files.
-%.s : %.cpp
- $(CC) -S $(ALL_CPPFLAGS) $< -o $@
-
-
-# Assemble: create object files from assembler source files.
-$(OBJDIR)/%.o : %.S
- @echo
- @echo $(MSG_ASSEMBLING) $<
- $(CC) -c $(ALL_ASFLAGS) $< -o $@
-
-
-# Create preprocessed source for use in sending a bug report.
-%.i : %.c
- $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
-
-
-# Target: clean project.
-clean: begin clean_list end
-
-clean_list :
- @echo
- @echo $(MSG_CLEANING)
- $(REMOVE) $(TARGET).hex
- $(REMOVE) $(TARGET).cof
- $(REMOVE) $(TARGET).elf
- $(REMOVE) $(TARGET).map
- $(REMOVE) $(TARGET).sym
- $(REMOVE) $(TARGET).lss
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
- $(REMOVE) $(SRC:.c=.s)
- $(REMOVE) $(SRC:.c=.d)
- $(REMOVE) $(SRC:.c=.i)
- $(REMOVEDIR) .dep
-
-doxygen:
- @echo Generating Project Documentation \($(TARGET)\)...
- @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
- exit 1; \
- fi;
- @echo Documentation Generation Complete.
-
-clean_doxygen:
- rm -rf Documentation
-
-checksource:
- @for f in $(SRC) $(CPPSRC) $(ASRC); do \
- if [ -f $$f ]; then \
- echo "Found Source File: $$f" ; \
- else \
- echo "Source File Not Found: $$f" ; \
- fi; done
-
-
-# Create object files directory
-$(shell mkdir $(OBJDIR) 2>/dev/null)
-
-
-# Include the dependency files.
--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
-
-
-# Listing of phony targets.
-.PHONY : all begin finish end sizebefore sizeafter gccversion \
-build elf hex lss sym doxygen clean clean_list clean_doxygen \
-dfu flip checksource
-
diff --git a/BuildTests/SingleUSBModeTest/makefile.xmega b/BuildTests/SingleUSBModeTest/makefile.xmega deleted file mode 100644 index 868bb500..00000000 --- a/BuildTests/SingleUSBModeTest/makefile.xmega +++ /dev/null @@ -1,706 +0,0 @@ -# Hey Emacs, this is a -*- makefile -*-
-#----------------------------------------------------------------------------
-# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
-# >> Modified for use with the LUFA project. <<
-#
-# Released to the Public Domain
-#
-# Additional material for this makefile was written by:
-# Peter Fleury
-# Tim Henigan
-# Colin O'Flynn
-# Reiner Patommel
-# Markus Pfaff
-# Sander Pool
-# Frederik Rouleau
-# Carlos Lamas
-# Dean Camera
-# Opendous Inc.
-# Denver Gingerich
-#
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device, using avrdude.
-# Please customize the avrdude settings below first!
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-# (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-# (must have Atmel FLIP installed).
-#
-# make doxygen = Generate DoxyGen documentation for the project (must have
-# DoxyGen installed)
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-# with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-
-# MCU name
-MCU = atxmega128a1u
-
-
-# Targeted chip architecture (see library "Architectures" documentation)
-ARCH = XMEGA
-
-
-# Target board (see library "Board Types" documentation, NONE for projects not requiring
-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
-# "Board" inside the application directory.
-BOARD = NONE
-
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This should be the frequency the system core runs at, after the system clock
-# has been set up correctly and started.
-F_CPU = 24000000
-
-
-# USB controller master clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency of the USB controller's clock generator in Hz.
-#
-# For the XMEGA chips, this should be equal to a multiple of 6MHz for Low
-# Speed USB mode, or a multiple of 48MHz for Full Speed USB mode.
-F_USB = 48000000
-
-
-# Output format. (can be srec, ihex, binary)
-FORMAT = ihex
-
-
-# Target file name (without extension).
-TARGET = Test
-
-
-# Object files directory
-# To put object files in current directory, use a dot (.), do NOT make
-# this an empty or blank macro!
-OBJDIR = .
-
-
-# Path to the LUFA library
-LUFA_PATH = ../..
-
-
-# LUFA library compile-time options and predefined tokens
-LUFA_OPTS =
-
-
-# Create the LUFA source path variables by including the LUFA root makefile
-include $(LUFA_PATH)/LUFA/makefile
-
-
-# List C source files here. (C dependencies are automatically generated.)
-SRC = Test.c \
- $(LUFA_SRC_USB)
-
-
-# List C++ source files here. (C dependencies are automatically generated.)
-CPPSRC =
-
-
-# List Assembler source files here.
-# Make them always end in a capital .S. Files ending in a lowercase .s
-# will not be considered source files but generated files (assembler
-# output from the compiler), and will be deleted upon "make clean"!
-# Even though the DOS/Win* filesystem matches both .s and .S the same,
-# it will preserve the spelling of the filenames, and gcc itself does
-# care about how the name is spelled on its command-line.
-ASRC = Dummy.S
-
-
-# Optimization level, can be [0, 1, 2, 3, s].
-# 0 = turn off optimization. s = optimize for size.
-# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPT = 1
-
-
-# List any extra directories to look for include files here.
-# Each directory must be seperated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
-
-
-# Compiler flag to set the C Standard level.
-# c89 = "ANSI" C
-# gnu89 = c89 plus GCC extensions
-# c99 = ISO C99 standard (not yet fully implemented)
-# gnu99 = c99 plus GCC extensions
-CSTANDARD = -std=gnu99
-
-
-# Place -D or -U options here for C sources
-CDEFS = -DF_CPU=$(F_CPU)UL
-CDEFS += -DF_USB=$(F_USB)UL
-CDEFS += -DBOARD=BOARD_$(BOARD)
-CDEFS += -DARCH=ARCH_$(ARCH)
-CDEFS += $(LUFA_OPTS)
-
-
-# Place -D or -U options here for ASM sources
-ADEFS = -DF_CPU=$(F_CPU)
-ADEFS += -DF_USB=$(F_USB)UL
-ADEFS += -DBOARD=BOARD_$(BOARD)
-ADEFS += -DARCH=ARCH_$(ARCH)
-ADEFS += $(LUFA_OPTS)
-
-# Place -D or -U options here for C++ sources
-CPPDEFS = -DF_CPU=$(F_CPU)UL
-CPPDEFS += -DF_USB=$(F_USB)UL
-CPPDEFS += -DBOARD=BOARD_$(BOARD)
-CPPDEFS += -DARCH=ARCH_$(ARCH)
-CPPDEFS += $(LUFA_OPTS)
-
-
-# Debugging format.
-# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
-# AVR Studio 4.10 requires dwarf-2.
-# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
-DEBUG = dwarf-2
-
-
-#---------------- Compiler Options C ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CFLAGS = -g$(DEBUG)
-CFLAGS += $(CDEFS)
-CFLAGS += -O$(OPT)
-CFLAGS += -funsigned-char
-CFLAGS += -funsigned-bitfields
-CFLAGS += -ffunction-sections
-CFLAGS += -fno-inline-small-functions
-CFLAGS += -fpack-struct
-CFLAGS += -fshort-enums
-CFLAGS += -fno-strict-aliasing
-CFLAGS += -Wall
-CFLAGS += -Wstrict-prototypes
-#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-CFLAGS += $(CSTANDARD)
-
-
-#---------------- Compiler Options C++ ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CPPFLAGS = -g$(DEBUG)
-CPPFLAGS += $(CPPDEFS)
-CPPFLAGS += -O$(OPT)
-CPPFLAGS += -funsigned-char
-CPPFLAGS += -funsigned-bitfields
-CPPFLAGS += -fpack-struct
-CPPFLAGS += -fshort-enums
-CPPFLAGS += -ffunction-sections
-CPPFLAGS += -fno-strict-aliasing
-CPPFLAGS += -fno-exceptions
-CPPFLAGS += -Wall
-CPPFLAGS += -Wundef
-#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
-CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-#CPPFLAGS += $(CSTANDARD)
-
-
-#---------------- Assembler Options ----------------
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns: create listing
-# -gstabs: have the assembler create line number information; note that
-# for use in COFF files, additional information about filenames
-# and function names needs to be present in the assembler source
-# files -- see avr-libc docs [FIXME: not yet described there]
-# -listing-cont-lines: Sets the maximum number of continuation lines of hex
-# dump that will be displayed for a given single line of source input.
-ASFLAGS = $(ADEFS)
-#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
-
-
-#---------------- Library Options ----------------
-# Minimalistic printf version
-PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
-
-# Floating point printf version (requires MATH_LIB = -lm below)
-PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
-
-# If this is left blank, then it will use the Standard printf version.
-PRINTF_LIB =
-#PRINTF_LIB = $(PRINTF_LIB_MIN)
-#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
-
-
-# Minimalistic scanf version
-SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
-
-# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
-SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
-
-# If this is left blank, then it will use the Standard scanf version.
-SCANF_LIB =
-#SCANF_LIB = $(SCANF_LIB_MIN)
-#SCANF_LIB = $(SCANF_LIB_FLOAT)
-
-
-MATH_LIB = -lm
-
-
-# List any extra directories to look for libraries here.
-# Each directory must be seperated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRALIBDIRS =
-
-
-
-#---------------- External Memory Options ----------------
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# used for variables (.data/.bss) and heap (malloc()).
-#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# only used for heap (malloc()).
-#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
-
-EXTMEMOPTS =
-
-
-
-#---------------- Linker Options ----------------
-# -Wl,...: tell GCC to pass this to linker.
-# -Map: create map file
-# --cref: add cross reference to map file
-#LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
-LDFLAGS += -Wl,--relax
-LDFLAGS += -Wl,--gc-sections
-LDFLAGS += $(EXTMEMOPTS)
-LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
-LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
-#LDFLAGS += -T linker_script.x
-
-
-
-#---------------- Programming Options (avrdude) ----------------
-
-# Programming hardware
-# Type: avrdude -c ?
-# to get a full listing.
-#
-AVRDUDE_PROGRAMMER = jtagmkII
-
-# com1 = serial port. Use lpt1 to connect to parallel port.
-AVRDUDE_PORT = usb
-
-AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
-
-
-# Uncomment the following if you want avrdude's erase cycle counter.
-# Note that this counter needs to be initialized first using -Yn,
-# see avrdude manual.
-#AVRDUDE_ERASE_COUNTER = -y
-
-# Uncomment the following if you do /not/ wish a verification to be
-# performed after programming the device.
-#AVRDUDE_NO_VERIFY = -V
-
-# Increase verbosity level. Please use this when submitting bug
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
-# to submit bug reports.
-#AVRDUDE_VERBOSE = -v -v
-
-AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
-
-
-
-#---------------- Debugging Options ----------------
-
-# For simulavr only - target MCU frequency.
-DEBUG_MFREQ = $(F_CPU)
-
-# Set the DEBUG_UI to either gdb or insight.
-# DEBUG_UI = gdb
-DEBUG_UI = insight
-
-# Set the debugging back-end to either avarice, simulavr.
-DEBUG_BACKEND = avarice
-#DEBUG_BACKEND = simulavr
-
-# GDB Init Filename.
-GDBINIT_FILE = __avr_gdbinit
-
-# When using avarice settings for the JTAG
-JTAG_DEV = /dev/com1
-
-# Debugging port used to communicate between GDB / avarice / simulavr.
-DEBUG_PORT = 4242
-
-# Debugging host used to communicate between GDB / avarice / simulavr, normally
-# just set to localhost unless doing some sort of crazy debugging when
-# avarice is running on a different computer.
-DEBUG_HOST = localhost
-
-
-
-#============================================================================
-
-
-# Define programs and commands.
-SHELL = sh
-CC = avr-gcc
-OBJCOPY = avr-objcopy
-OBJDUMP = avr-objdump
-SIZE = avr-size
-AR = avr-ar rcs
-NM = avr-nm
-AVRDUDE = avrdude
-REMOVE = rm -f
-REMOVEDIR = rm -rf
-COPY = cp
-WINSHELL = cmd
-
-
-# Define Messages
-# English
-MSG_ERRORS_NONE = Errors: none
-MSG_BEGIN = -------- begin --------
-MSG_END = -------- end --------
-MSG_SIZE_BEFORE = Size before:
-MSG_SIZE_AFTER = Size after:
-MSG_COFF = Converting to AVR COFF:
-MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
-MSG_FLASH = Creating load file for Flash:
-MSG_EEPROM = Creating load file for EEPROM:
-MSG_EXTENDED_LISTING = Creating Extended Listing:
-MSG_SYMBOL_TABLE = Creating Symbol Table:
-MSG_LINKING = Linking:
-MSG_COMPILING = Compiling C:
-MSG_COMPILING_CPP = Compiling C++:
-MSG_ASSEMBLING = Assembling:
-MSG_CLEANING = Cleaning project:
-MSG_CREATING_LIBRARY = Creating library:
-
-
-
-
-# Define all object files.
-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
-
-# Define all listing files.
-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
-
-
-# Compiler flags to generate dependency files.
-#GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
-
-
-# Combine all necessary flags and optional flags.
-# Add target processor to flags.
-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
-ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
-
-
-
-
-
-# Default target.
-all: begin gccversion sizebefore build sizeafter end
-
-# Change the build target to build a HEX file or a library.
-build: elf hex eep lss sym
-#build: lib
-
-
-elf: $(TARGET).elf
-hex: $(TARGET).hex
-eep: $(TARGET).eep
-lss: $(TARGET).lss
-sym: $(TARGET).sym
-LIBNAME=lib$(TARGET).a
-lib: $(LIBNAME)
-
-
-
-# Eye candy.
-# AVR Studio 3.x does not check make's exit code but relies on
-# the following magic strings to be generated by the compile job.
-begin:
- @echo
- @echo $(MSG_BEGIN)
-
-end:
- @echo $(MSG_END)
- @echo
-
-
-# Display size of file.
-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
-ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
-MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
-FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
-
-
-sizebefore:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-sizeafter:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-
-
-# Display compiler version information.
-gccversion :
- @$(CC) --version
-
-
-# Program the device.
-program: $(TARGET).hex $(TARGET).eep
- $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- $(COPY) $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
- $(REMOVE) $(TARGET)eep.hex
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) eeprom-flash $(TARGET).eep
- dfu-programmer $(MCU) reset
-
-
-# Generate avr-gdb config/init file which does the following:
-# define the reset signal, load the target file, connect to target, and set
-# a breakpoint at main().
-gdb-config:
- @$(REMOVE) $(GDBINIT_FILE)
- @echo define reset >> $(GDBINIT_FILE)
- @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
- @echo end >> $(GDBINIT_FILE)
- @echo file $(TARGET).elf >> $(GDBINIT_FILE)
- @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
-ifeq ($(DEBUG_BACKEND),simulavr)
- @echo load >> $(GDBINIT_FILE)
-endif
- @echo break main >> $(GDBINIT_FILE)
-
-debug: gdb-config $(TARGET).elf
-ifeq ($(DEBUG_BACKEND), avarice)
- @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
- @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
- $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
- @$(WINSHELL) /c pause
-
-else
- @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
- $(DEBUG_MFREQ) --port $(DEBUG_PORT)
-endif
- @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
-
-
-
-
-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
-COFFCONVERT = $(OBJCOPY) --debugging
-COFFCONVERT += --change-section-address .data-0x800000
-COFFCONVERT += --change-section-address .bss-0x800000
-COFFCONVERT += --change-section-address .noinit-0x800000
-COFFCONVERT += --change-section-address .eeprom-0x810000
-
-
-
-coff: $(TARGET).elf
- @echo
- @echo $(MSG_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
-
-
-extcoff: $(TARGET).elf
- @echo
- @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
-
-
-
-# Create final output files (.hex, .eep) from ELF output file.
-%.hex: %.elf
- @echo
- @echo $(MSG_FLASH) $@
- $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@
-
-%.eep: %.elf
- @echo
- @echo $(MSG_EEPROM) $@
- -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
- --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
-
-# Create extended listing file from ELF output file.
-%.lss: %.elf
- @echo
- @echo $(MSG_EXTENDED_LISTING) $@
- $(OBJDUMP) -h -S -z $< > $@
-
-# Create a symbol table from ELF output file.
-%.sym: %.elf
- @echo
- @echo $(MSG_SYMBOL_TABLE) $@
- $(NM) -n $< > $@
-
-
-
-# Create library from object files.
-.SECONDARY : $(TARGET).a
-.PRECIOUS : $(OBJ)
-%.a: $(OBJ)
- @echo
- @echo $(MSG_CREATING_LIBRARY) $@
- $(AR) $@ $(OBJ)
-
-
-# Link: create ELF output file from object files.
-.SECONDARY : $(TARGET).elf
-.PRECIOUS : $(OBJ)
-%.elf: $(OBJ)
- @echo
- @echo $(MSG_LINKING) $@
- $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
-
-
-# Compile: create object files from C source files.
-$(OBJDIR)/%.o : %.c
- @echo
- @echo $(MSG_COMPILING) $<
- $(CC) -c $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create object files from C++ source files.
-$(OBJDIR)/%.o : %.cpp
- @echo
- @echo $(MSG_COMPILING_CPP) $<
- $(CC) -c $(ALL_CPPFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C source files.
-%.s : %.c
- $(CC) -S $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C++ source files.
-%.s : %.cpp
- $(CC) -S $(ALL_CPPFLAGS) $< -o $@
-
-
-# Assemble: create object files from assembler source files.
-$(OBJDIR)/%.o : %.S
- @echo
- @echo $(MSG_ASSEMBLING) $<
- $(CC) -c $(ALL_ASFLAGS) $< -o $@
-
-
-# Create preprocessed source for use in sending a bug report.
-%.i : %.c
- $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
-
-
-# Target: clean project.
-clean: begin clean_list end
-
-clean_list :
- @echo
- @echo $(MSG_CLEANING)
- $(REMOVE) $(TARGET).hex
- $(REMOVE) $(TARGET).eep
- $(REMOVE) $(TARGET).cof
- $(REMOVE) $(TARGET).elf
- $(REMOVE) $(TARGET).map
- $(REMOVE) $(TARGET).sym
- $(REMOVE) $(TARGET).lss
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
- $(REMOVE) $(SRC:.c=.s)
- $(REMOVE) $(SRC:.c=.d)
- $(REMOVE) $(SRC:.c=.i)
- $(REMOVEDIR) .dep
-
-doxygen:
- @echo Generating Project Documentation \($(TARGET)\)...
- @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
- exit 1; \
- fi;
- @echo Documentation Generation Complete.
-
-clean_doxygen:
- rm -rf Documentation
-
-checksource:
- @for f in $(SRC) $(CPPSRC) $(ASRC); do \
- if [ -f $$f ]; then \
- echo "Found Source File: $$f" ; \
- else \
- echo "Source File Not Found: $$f" ; \
- fi; done
-
-
-# Create object files directory
-$(shell mkdir $(OBJDIR) 2>/dev/null)
-
-
-# Include the dependency files.
--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
-
-
-# Listing of phony targets.
-.PHONY : all begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff doxygen clean \
-clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
-debug gdb-config checksource
diff --git a/BuildTests/StaticAnalysisTest/makefile b/BuildTests/StaticAnalysisTest/makefile index 1578412f..6e6ed3c3 100644 --- a/BuildTests/StaticAnalysisTest/makefile +++ b/BuildTests/StaticAnalysisTest/makefile @@ -1,49 +1,39 @@ -#
-# LUFA Library
-# Copyright (C) Dean Camera, 2012.
-#
-# dean [at] fourwalledcubicle [dot] com
-# www.lufa-lib.org
-#
-
-# Static anlysis of the entire LUFA source tree, using the free cross-platform "cppcheck" tool.
-
-# Path to the root of the LUFA tree to scan
-LUFA_ROOT_PATH = ../..
-
-# Filenames or directories (including fragments) to exclude from the analysis
-EXCLUDE_LIST = FATFs/ \
- PetiteFATFs/ \
- uip/
-
-# Output message template for found warnings and errors
-MESSAGE_TEMPLATE = "{file}:{line}: {severity} ({id}): {message}"
-
-# Checks to suppress so that generated warnings are discarded
-SUPPRESS_WARNINGS = variableScope \
- missingInclude
-
-# Extra paths to search for include files
-INCLUDE_PATHS = $(LUFA_ROOT_PATH)/LUFA/CodeTemplates/ \
- $(LUFA_ROOT_PATH)/Projects/AVRISP-MKII/
-
-# Configuration options to pass to cppcheck
-CPPCHECK_OPTIONS = --template=$(MESSAGE_TEMPLATE) $(INCLUDE_PATHS:%=-I%) $(EXCLUDE_LIST:%=-i%) --inline-suppr --force --error-exitcode=1 --std=c99
-
-
-all: begin staticcheck end
-
-begin:
- @echo Executing build test "StaticAnalysisTest".
- @echo
-
-end:
- @echo Build test "StaticAnalysisTest" complete.
- @echo
-
-staticcheck:
- cppcheck --quiet $(CPPCHECK_OPTIONS) --check-config $(LUFA_ROOT_PATH)
- cppcheck --quiet $(CPPCHECK_OPTIONS) --enable=all $(SUPPRESS_WARNINGS:%=--suppress=%) $(LUFA_ROOT_PATH)
-
-%:
-
\ No newline at end of file +# +# LUFA Library +# Copyright (C) Dean Camera, 2012. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# + +# Static anlysis of the entire LUFA source tree, using the free cross-platform "cppcheck" tool. + +# Path to the LUFA library core +LUFA_PATH := ../../LUFA/ + +CPPCHECK_EXCLUDES := FATFs/ \ + PetiteFATFs/ \ + uip/ +CPPCHECK_INCLUDES := $(patsubst %/,%,$(LUFA_PATH))/CodeTemplates/ \ + $(patsubst %/,%,$(LUFA_PATH))/../Projects/AVRISP-MKII/ + +SRC := $(patsubst %/,%,$(LUFA_PATH))/.. + +all: begin cppcheck end + +begin: + @echo Executing build test "StaticAnalysisTest". + @echo + +end: + @echo Build test "StaticAnalysisTest" complete. + @echo + +%: + + +.PHONY: all begin end + +# Include LUFA build script makefiles +include $(LUFA_PATH)/Build/lufa_core.mk +include $(LUFA_PATH)/Build/lufa_cppcheck.mk
\ No newline at end of file diff --git a/BuildTests/makefile b/BuildTests/makefile index 604b2e56..901dbadb 100644 --- a/BuildTests/makefile +++ b/BuildTests/makefile @@ -1,19 +1,24 @@ -#
-# LUFA Library
-# Copyright (C) Dean Camera, 2012.
-#
-# dean [at] fourwalledcubicle [dot] com
-# www.lufa-lib.org
-#
-
-# Makefile to build all the LUFA Build Tests. Build Tests are
-# used to verify the correctness of the LUFA library, and are
-# not intended to be modified or compiled by non-developers.
-
-all:
-%:
- $(MAKE) -C BoardDriverTest $@
- $(MAKE) -C BootloaderTest $@
- $(MAKE) -C ModuleTest $@
- $(MAKE) -C SingleUSBModeTest $@
- $(MAKE) -C StaticAnalysisTest $@
+# +# LUFA Library +# Copyright (C) Dean Camera, 2012. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# + +# Makefile to build all the LUFA Build Tests. Build Tests are +# used to verify the correctness of the LUFA library, and are +# not intended to be modified or compiled by non-developers. + +all: + +%: + @echo Executing \"make $@\" on all LUFA build tests. + @echo + $(MAKE) -C BoardDriverTest $@ + $(MAKE) -C BootloaderTest $@ + $(MAKE) -C ModuleTest $@ + $(MAKE) -C SingleUSBModeTest $@ + $(MAKE) -C StaticAnalysisTest $@ + @echo + @echo LUFA build test \"make $@\" operation complete.
\ No newline at end of file |