diff options
Diffstat (limited to 'Demos/Device/ClassDriver')
48 files changed, 330 insertions, 426 deletions
diff --git a/Demos/Device/ClassDriver/AudioInput/AudioInput.txt b/Demos/Device/ClassDriver/AudioInput/AudioInput.txt index 654536c8..dfa9362c 100644 --- a/Demos/Device/ClassDriver/AudioInput/AudioInput.txt +++ b/Demos/Device/ClassDriver/AudioInput/AudioInput.txt @@ -10,9 +10,9 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF Audio 1.0 Data Formats Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/AudioInput/Doxygen.conf b/Demos/Device/ClassDriver/AudioInput/Doxygen.conf index dd5fe211..d217aa44 100644 --- a/Demos/Device/ClassDriver/AudioInput/Doxygen.conf +++ b/Demos/Device/ClassDriver/AudioInput/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Audio Input Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/AudioInput/makefile b/Demos/Device/ClassDriver/AudioInput/makefile index a63765eb..5724da5e 100644 --- a/Demos/Device/ClassDriver/AudioInput/makefile +++ b/Demos/Device/ClassDriver/AudioInput/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt index 77e98661..76445e0e 100644 --- a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt +++ b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt @@ -10,9 +10,9 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF Audio 1.0 Data Formats Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf b/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf index c50327d3..4cd9e9c5 100644 --- a/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf +++ b/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Audio Output Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/AudioOutput/makefile b/Demos/Device/ClassDriver/AudioOutput/makefile index 1ce907ca..88074f60 100644 --- a/Demos/Device/ClassDriver/AudioOutput/makefile +++ b/Demos/Device/ClassDriver/AudioOutput/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf b/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf index cd37f7df..0f78680c 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf +++ b/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Dual Virtual Serial Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt index 822fabca..70e95ad5 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt +++ b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt @@ -10,9 +10,9 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) * * \section Sec_Info USB Information: * @@ -41,7 +41,7 @@ * USBIF CDC Class Standard</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/makefile b/Demos/Device/ClassDriver/DualVirtualSerial/makefile index 5290c4fb..064bf128 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/makefile +++ b/Demos/Device/ClassDriver/DualVirtualSerial/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/GenericHID/Doxygen.conf b/Demos/Device/ClassDriver/GenericHID/Doxygen.conf index e12fde77..7b71c205 100644 --- a/Demos/Device/ClassDriver/GenericHID/Doxygen.conf +++ b/Demos/Device/ClassDriver/GenericHID/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Generic HID Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/GenericHID/GenericHID.txt b/Demos/Device/ClassDriver/GenericHID/GenericHID.txt index 998471a2..3d72345f 100644 --- a/Demos/Device/ClassDriver/GenericHID/GenericHID.txt +++ b/Demos/Device/ClassDriver/GenericHID/GenericHID.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/ClassDriver/GenericHID/makefile b/Demos/Device/ClassDriver/GenericHID/makefile index e4d80215..5ef95e06 100644 --- a/Demos/Device/ClassDriver/GenericHID/makefile +++ b/Demos/Device/ClassDriver/GenericHID/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/Joystick/Doxygen.conf b/Demos/Device/ClassDriver/Joystick/Doxygen.conf index 1ebeaf26..407d08a8 100644 --- a/Demos/Device/ClassDriver/Joystick/Doxygen.conf +++ b/Demos/Device/ClassDriver/Joystick/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Joystick Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/Joystick/Joystick.txt b/Demos/Device/ClassDriver/Joystick/Joystick.txt index 6fee43b3..55be2c30 100644 --- a/Demos/Device/ClassDriver/Joystick/Joystick.txt +++ b/Demos/Device/ClassDriver/Joystick/Joystick.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/ClassDriver/Joystick/makefile b/Demos/Device/ClassDriver/Joystick/makefile index 955b5bd4..c970747a 100644 --- a/Demos/Device/ClassDriver/Joystick/makefile +++ b/Demos/Device/ClassDriver/Joystick/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/Keyboard/Doxygen.conf b/Demos/Device/ClassDriver/Keyboard/Doxygen.conf index 3557860c..0b47b1a3 100644 --- a/Demos/Device/ClassDriver/Keyboard/Doxygen.conf +++ b/Demos/Device/ClassDriver/Keyboard/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Keyboard Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/Keyboard/Keyboard.txt b/Demos/Device/ClassDriver/Keyboard/Keyboard.txt index b124efb0..3e7ff88e 100644 --- a/Demos/Device/ClassDriver/Keyboard/Keyboard.txt +++ b/Demos/Device/ClassDriver/Keyboard/Keyboard.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/ClassDriver/Keyboard/makefile b/Demos/Device/ClassDriver/Keyboard/makefile index 03913b7b..8b07bb52 100644 --- a/Demos/Device/ClassDriver/Keyboard/makefile +++ b/Demos/Device/ClassDriver/Keyboard/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf b/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf index 284d454a..a7357cb1 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf +++ b/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Combined Keyboard/Mouse Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt index a926ab15..b994422a 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt +++ b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/ClassDriver/KeyboardMouse/makefile b/Demos/Device/ClassDriver/KeyboardMouse/makefile index ee4e4383..7d4fc953 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/makefile +++ b/Demos/Device/ClassDriver/KeyboardMouse/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf index 24028aea..c3696bbd 100644 --- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf +++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Combined Keyboard/Mouse (Multiple HID R # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.txt b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.txt index bf0528ec..e99a7dc7 100644 --- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.txt +++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile index 93ce2861..2909880e 100644 --- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile +++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/MIDI/Doxygen.conf b/Demos/Device/ClassDriver/MIDI/Doxygen.conf index 96f71c7d..f95325f8 100644 --- a/Demos/Device/ClassDriver/MIDI/Doxygen.conf +++ b/Demos/Device/ClassDriver/MIDI/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - MIDI Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/MIDI/MIDI.txt b/Demos/Device/ClassDriver/MIDI/MIDI.txt index 026f91bb..362250c4 100644 --- a/Demos/Device/ClassDriver/MIDI/MIDI.txt +++ b/Demos/Device/ClassDriver/MIDI/MIDI.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -39,7 +39,7 @@ * General MIDI Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/MIDI/makefile b/Demos/Device/ClassDriver/MIDI/makefile index 9190344f..e5b0e624 100644 --- a/Demos/Device/ClassDriver/MIDI/makefile +++ b/Demos/Device/ClassDriver/MIDI/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/MassStorage/Doxygen.conf b/Demos/Device/ClassDriver/MassStorage/Doxygen.conf index e74be64a..4ef06750 100644 --- a/Demos/Device/ClassDriver/MassStorage/Doxygen.conf +++ b/Demos/Device/ClassDriver/MassStorage/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Mass Storage Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/MassStorage/MassStorage.txt b/Demos/Device/ClassDriver/MassStorage/MassStorage.txt index c2761a38..5bf7c557 100644 --- a/Demos/Device/ClassDriver/MassStorage/MassStorage.txt +++ b/Demos/Device/ClassDriver/MassStorage/MassStorage.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -40,7 +40,7 @@ * SCSI Block Commands Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/MassStorage/makefile b/Demos/Device/ClassDriver/MassStorage/makefile index be74104a..0ee46196 100644 --- a/Demos/Device/ClassDriver/MassStorage/makefile +++ b/Demos/Device/ClassDriver/MassStorage/makefile @@ -698,7 +698,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf b/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf index f8b707df..4f8b9e59 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Combined Mass Storage and Keyboard Devi # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt index 01bf5772..7cdb4727 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -44,7 +44,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile index 5e8dbf49..a504d0c6 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile @@ -693,7 +693,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/Mouse/Doxygen.conf b/Demos/Device/ClassDriver/Mouse/Doxygen.conf index 7fccc094..1dd2ccd0 100644 --- a/Demos/Device/ClassDriver/Mouse/Doxygen.conf +++ b/Demos/Device/ClassDriver/Mouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Mouse Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/Mouse/Mouse.txt b/Demos/Device/ClassDriver/Mouse/Mouse.txt index 65a184f2..d1277a2d 100644 --- a/Demos/Device/ClassDriver/Mouse/Mouse.txt +++ b/Demos/Device/ClassDriver/Mouse/Mouse.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -38,7 +38,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Low Speed Mode \n * Full Speed Mode</td> * </tr> diff --git a/Demos/Device/ClassDriver/Mouse/makefile b/Demos/Device/ClassDriver/Mouse/makefile index f54c896c..7c7493d1 100644 --- a/Demos/Device/ClassDriver/Mouse/makefile +++ b/Demos/Device/ClassDriver/Mouse/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf b/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf index d43e5b0a..da74f6b4 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf +++ b/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - RNDIS Ethernet Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt index a458370d..ac72d4ae 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt +++ b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt @@ -10,8 +10,8 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) * * \section Sec_Info USB Information: * @@ -35,7 +35,7 @@ * <td>Microsoft RNDIS Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/RNDISEthernet/makefile b/Demos/Device/ClassDriver/RNDISEthernet/makefile index 4cc22a59..c5370560 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/makefile +++ b/Demos/Device/ClassDriver/RNDISEthernet/makefile @@ -701,7 +701,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf b/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf index 2e09c1a8..ebe72a5d 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf +++ b/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Virtual Serial Device Demo" # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt index f26c4b87..e0a3291b 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt +++ b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -37,7 +37,7 @@ * <td>USBIF CDC Class Standard</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/VirtualSerial/makefile b/Demos/Device/ClassDriver/VirtualSerial/makefile index 5539d8ab..e0023511 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/makefile +++ b/Demos/Device/ClassDriver/VirtualSerial/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf index 20d4914b..c38f51df 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Virtual Serial/Mass Storage Device Demo # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt b/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt index 088f20ac..04224411 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt @@ -10,9 +10,9 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) * * \section Sec_Info USB Information: * @@ -42,7 +42,7 @@ * SCSI Block Commands Specification</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/makefile b/Demos/Device/ClassDriver/VirtualSerialMassStorage/makefile index a3bca467..57b78a87 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/makefile +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/makefile @@ -693,7 +693,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf b/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf index acf6f473..fea97b2d 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.0 +# Doxyfile 1.8.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -32,7 +32,7 @@ PROJECT_NAME = "LUFA Library - Combined Virtual Serial and Mouse Devic # This could be handy for archiving the generated documentation or # if some version control system is used. -PROJECT_NUMBER = 0.0.0 +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer @@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = NO -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. For this to work a browser that supports @@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS = YES HTML_DYNAMIC_SECTIONS = YES +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID = org.doxygen.Project # navigation tree you can set this option to NO if you already set # GENERATE_TREEVIEW to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = YES # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. @@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW = YES ENUM_VALUES_PER_LINE = 1 -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree # is shown. @@ -1725,7 +1719,7 @@ CALLER_GRAPH = NO GRAPHICAL_HIERARCHY = NO -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt index 53152043..fe6328b7 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt @@ -10,10 +10,10 @@ * * The following list indicates what microcontrollers are compatible with this demo. * - * - Series 7 USB AVRs (AT90USBxxx7) - * - Series 6 USB AVRs (AT90USBxxx6) - * - Series 4 USB AVRs (ATMEGAxxU4) - * - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) * * \section Sec_Info USB Information: * @@ -41,7 +41,7 @@ * USBIF HID Usage Tables</td> * </tr> * <tr> - * <td><b>Usable Speeds:</b></td> + * <td><b>Supported USB Speeds:</b></td> * <td>Full Speed Mode</td> * </tr> * </table> diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile index 5cd99d5f..592c9151 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile @@ -691,7 +691,7 @@ clean_list : doxygen: @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ exit 1; \ fi; @echo Documentation Generation Complete. |