diff options
Diffstat (limited to 'Demos/Host')
29 files changed, 116 insertions, 174 deletions
diff --git a/Demos/Host/ClassDriver/AndroidAccessoryHost/Doxygen.conf b/Demos/Host/ClassDriver/AndroidAccessoryHost/Doxygen.conf index 36cb2f08..18ee748c 100644 --- a/Demos/Host/ClassDriver/AndroidAccessoryHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/AndroidAccessoryHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/ClassDriver/AudioInputHost/Doxygen.conf b/Demos/Host/ClassDriver/AudioInputHost/Doxygen.conf index f3ed928f..6645b195 100644 --- a/Demos/Host/ClassDriver/AudioInputHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/AudioInputHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/ClassDriver/AudioOutputHost/Doxygen.conf b/Demos/Host/ClassDriver/AudioOutputHost/Doxygen.conf index 237d312e..9bdda1f1 100644 --- a/Demos/Host/ClassDriver/AudioOutputHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/AudioOutputHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/ClassDriver/JoystickHostWithParser/Doxygen.conf b/Demos/Host/ClassDriver/JoystickHostWithParser/Doxygen.conf index 575abd0e..749263b8 100644 --- a/Demos/Host/ClassDriver/JoystickHostWithParser/Doxygen.conf +++ b/Demos/Host/ClassDriver/JoystickHostWithParser/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/ClassDriver/KeyboardHost/Doxygen.conf b/Demos/Host/ClassDriver/KeyboardHost/Doxygen.conf index e626e69b..118e37f6 100644 --- a/Demos/Host/ClassDriver/KeyboardHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/KeyboardHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/ClassDriver/KeyboardHostWithParser/Doxygen.conf b/Demos/Host/ClassDriver/KeyboardHostWithParser/Doxygen.conf index 72a0fb75..3659a85a 100644 --- a/Demos/Host/ClassDriver/KeyboardHostWithParser/Doxygen.conf +++ b/Demos/Host/ClassDriver/KeyboardHostWithParser/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/ClassDriver/MIDIHost/Doxygen.conf b/Demos/Host/ClassDriver/MIDIHost/Doxygen.conf index 1d898aca..bce67fde 100644 --- a/Demos/Host/ClassDriver/MIDIHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/MIDIHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/ClassDriver/MassStorageHost/Doxygen.conf b/Demos/Host/ClassDriver/MassStorageHost/Doxygen.conf index 086bf674..8b7fb219 100644 --- a/Demos/Host/ClassDriver/MassStorageHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/MassStorageHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/ClassDriver/MouseHost/Doxygen.conf b/Demos/Host/ClassDriver/MouseHost/Doxygen.conf index 29459d8b..a0158a39 100644 --- a/Demos/Host/ClassDriver/MouseHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/MouseHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/ClassDriver/MouseHostWithParser/Doxygen.conf b/Demos/Host/ClassDriver/MouseHostWithParser/Doxygen.conf index 35b3dd06..4bc2c059 100644 --- a/Demos/Host/ClassDriver/MouseHostWithParser/Doxygen.conf +++ b/Demos/Host/ClassDriver/MouseHostWithParser/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/ClassDriver/PrinterHost/Doxygen.conf b/Demos/Host/ClassDriver/PrinterHost/Doxygen.conf index af83229f..a2c5ee1f 100644 --- a/Demos/Host/ClassDriver/PrinterHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/PrinterHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/Doxygen.conf b/Demos/Host/ClassDriver/RNDISEthernetHost/Doxygen.conf index 8864c18d..7c4fc5ef 100644 --- a/Demos/Host/ClassDriver/RNDISEthernetHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/RNDISEthernetHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/ClassDriver/StillImageHost/Doxygen.conf b/Demos/Host/ClassDriver/StillImageHost/Doxygen.conf index f9ebf151..518c26d4 100644 --- a/Demos/Host/ClassDriver/StillImageHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/StillImageHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/ClassDriver/VirtualSerialHost/Doxygen.conf b/Demos/Host/ClassDriver/VirtualSerialHost/Doxygen.conf index d6fe34d7..2f58e77d 100644 --- a/Demos/Host/ClassDriver/VirtualSerialHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/VirtualSerialHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/AndroidAccessoryHost/Doxygen.conf b/Demos/Host/LowLevel/AndroidAccessoryHost/Doxygen.conf index 36cb2f08..18ee748c 100644 --- a/Demos/Host/LowLevel/AndroidAccessoryHost/Doxygen.conf +++ b/Demos/Host/LowLevel/AndroidAccessoryHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf b/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf index f3ed928f..6645b195 100644 --- a/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf +++ b/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf b/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf index 237d312e..9bdda1f1 100644 --- a/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf +++ b/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/GenericHIDHost/Doxygen.conf b/Demos/Host/LowLevel/GenericHIDHost/Doxygen.conf index ae6cafac..f2953a56 100644 --- a/Demos/Host/LowLevel/GenericHIDHost/Doxygen.conf +++ b/Demos/Host/LowLevel/GenericHIDHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf b/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf index 575abd0e..749263b8 100644 --- a/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf +++ b/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/KeyboardHost/Doxygen.conf b/Demos/Host/LowLevel/KeyboardHost/Doxygen.conf index e626e69b..118e37f6 100644 --- a/Demos/Host/LowLevel/KeyboardHost/Doxygen.conf +++ b/Demos/Host/LowLevel/KeyboardHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf b/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf index 72a0fb75..3659a85a 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/MIDIHost/Doxygen.conf b/Demos/Host/LowLevel/MIDIHost/Doxygen.conf index 1d898aca..bce67fde 100644 --- a/Demos/Host/LowLevel/MIDIHost/Doxygen.conf +++ b/Demos/Host/LowLevel/MIDIHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/MassStorageHost/Doxygen.conf b/Demos/Host/LowLevel/MassStorageHost/Doxygen.conf index 086bf674..8b7fb219 100644 --- a/Demos/Host/LowLevel/MassStorageHost/Doxygen.conf +++ b/Demos/Host/LowLevel/MassStorageHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/MouseHost/Doxygen.conf b/Demos/Host/LowLevel/MouseHost/Doxygen.conf index 29459d8b..a0158a39 100644 --- a/Demos/Host/LowLevel/MouseHost/Doxygen.conf +++ b/Demos/Host/LowLevel/MouseHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf b/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf index 35b3dd06..4bc2c059 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf +++ b/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/PrinterHost/Doxygen.conf b/Demos/Host/LowLevel/PrinterHost/Doxygen.conf index af83229f..a2c5ee1f 100644 --- a/Demos/Host/LowLevel/PrinterHost/Doxygen.conf +++ b/Demos/Host/LowLevel/PrinterHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/Doxygen.conf b/Demos/Host/LowLevel/RNDISEthernetHost/Doxygen.conf index dac7bf3c..1b388b9f 100644 --- a/Demos/Host/LowLevel/RNDISEthernetHost/Doxygen.conf +++ b/Demos/Host/LowLevel/RNDISEthernetHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/StillImageHost/Doxygen.conf b/Demos/Host/LowLevel/StillImageHost/Doxygen.conf index f9ebf151..518c26d4 100644 --- a/Demos/Host/LowLevel/StillImageHost/Doxygen.conf +++ b/Demos/Host/LowLevel/StillImageHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/VirtualSerialHost/Doxygen.conf b/Demos/Host/LowLevel/VirtualSerialHost/Doxygen.conf index d6fe34d7..2f58e77d 100644 --- a/Demos/Host/LowLevel/VirtualSerialHost/Doxygen.conf +++ b/Demos/Host/LowLevel/VirtualSerialHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES |