diff options
Diffstat (limited to 'LUFA/Build/lufa.build.in')
| -rw-r--r-- | LUFA/Build/lufa.build.in | 182 |
1 files changed, 0 insertions, 182 deletions
diff --git a/LUFA/Build/lufa.build.in b/LUFA/Build/lufa.build.in deleted file mode 100644 index e9921efb..00000000 --- a/LUFA/Build/lufa.build.in +++ /dev/null @@ -1,182 +0,0 @@ -#
-# LUFA Library
-# Copyright (C) Dean Camera, 2012.
-#
-# dean [at] fourwalledcubicle [dot] com
-# www.lufa-lib.org
-#
-
-LUFA_BUILD_MODULES += BUILD
-LUFA_BUILD_TARGETS += size checksource all elf hex clean
-
-# -----------------------------------------------------------------------------
-# LUFA Compiler Buildsystem Makefile Module.
-# -----------------------------------------------------------------------------
-# DESCRIPTION:
-# Provides a set of targets to build a C, C++ and/or Assembly application
-# via the AVR-GCC compiler.
-# -----------------------------------------------------------------------------
-# TARGETS:
-#
-# size - List application size
-# checksource - Check existance of listed input source files
-# all - Build application and list size
-# elf - Build application ELF debug object file
-# hex - Build application HEX object files
-# clean - Remove output files
-#
-# MANDATORY PARAMETERS:
-#
-# TARGET - Application name
-# ARCH - Device architecture name
-# MCU - Microcontroller device model name
-# SRC - List of input source files (.c, .cpp/.c++, .S)
-# F_USB - Speed of the input clock of the USB controller
-# in Hz
-# LUFA_PATH - Path to the LUFA library core
-#
-# OPTIONAL PARAMETERS:
-#
-# BOARD - LUFA board hardware
-# OPTIMIZATION - Optimization level
-# C_STANDARD - C Language Standard to use
-# CPP_STANDARD - C++ Language Standard to use
-# F_CPU - Speed of the CPU, in Hz
-# CC_FLAGS - Flags to pass to the compiler
-# LD_FLAGS - Flags to pass to the linker
-#
-# -----------------------------------------------------------------------------
-
-# Output Messages
-MSG_BUILD_BEGIN = Begin compilation of project \"$(TARGET)\"...
-MSG_BUILD_END = Finished building project \"$(TARGET)\"...
-MSG_COMPILE_CMD = ' [CC] :'
-MSG_REMOVE_CMD = ' [RM] :'
-MSG_LINKER_CMD = ' [LNK] :'
-MSG_SIZE_CMD = ' [SIZE] :'
-MSG_OBJCPY_CMD = ' [OBJCPY] :'
-MSG_OBJDMP_CMD = ' [OBJDMP] :'
-
-# Sanity check the user MCU, TARGET, ARCH, SRC, F_USB and LUFA_PATH makefile options
-ifeq ($(TARGET),)
- $(error Makefile TARGET value not set.)
-endif
-ifeq ($(ARCH),)
- $(error Makefile ARCH value not set.)
-endif
-ifeq ($(MCU),)
- $(error Makefile MCU value not set.)
-endif
-ifeq ($(SRC),)
- $(error Makefile SRC value not set.)
-endif
-ifeq ($(F_USB),)
- $(error Makefile F_USB value not set.)
-endif
-ifeq ($(LUFA_PATH),)
- $(error Makefile LUFA_PATH value not set.)
-endif
-
-# Default values of user-supplied variables
-BOARD ?= NONE
-OPTIMIZATION ?= s
-F_CPU ?=
-C_STANDARD ?= c99
-CPP_STANDARD ?= c++98
-
-# Convert input source file list to differentiate them by type
-C_SOURCE = $(filter %.c, $(SRC))
-CPP_SOURCE = $(filter %.cpp, $(SRC)) $(filter %.c++, $(SRC))
-ASM_SOURCE = $(filter %.S, $(SRC))
-
-# Convert input source filenames into a list of required output object files
-OBJECT_FILES = $(C_SOURCE:%.c=%.o) $(CPP_SOURCE:%.c++=%.o) $(CPP_SOURCE:%.c++=%.o) $(ASM_SOURCE:%.S=%.o)
-
-# Create a list of flags to pass to the compiler
-CC_FLAGS += -mmcu=$(MCU) -I. -I$(LUFA_PATH)/.. -gdwarf-2 -pipe
-CC_FLAGS += -Wall -Wstrict-prototypes
-CC_FLAGS += -fno-strict-aliasing -funsigned-char -funsigned-bitfields -ffunction-sections -fshort-enums -fno-inline-small-functions -fpack-struct -fshort-enums
-CC_FLAGS += -DARCH=ARCH_$(ARCH) -DBOARD=BOARD_$(BOARD) -DF_USB=$(F_USB)UL
-ifneq ($(F_CPU),)
- CC_FLAGS += -DF_CPU=$(F_CPU)UL
-endif
-
-# Create a list of flags to pass to the linker
-LD_FLAGS += -Wl,-Map=$(TARGET).map,--cref -Wl,--relax -Wl,--gc-sections -lm
-
-# Create a list of unknown source file types, if any are found throw an error
-UNKNOWN_SOURCE = $(filter-out $(C_SOURCE) $(CPP_SOURCE) $(ASM_SOURCE), $(SRC))
-ifneq ($(UNKNOWN_SOURCE),)
- $(error Unknown input source formats: $(UNKNOWN_SOURCE))
-endif
-
-# Determine flags to pass to the size utility based on its reported features
-SIZE_MCU_FLAG = $(shell avr-size --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
-SIZE_FORMAT_FLAG = $(shell avr-size --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
-
-
-begin:
- @echo ""
- @echo $(MSG_BUILD_BEGIN)
-
-end:
- @echo $(MSG_BUILD_END)
- @echo ""
-
-checksource:
- @for f in $(SRC) $(CPPSRC) $(ASRC); do \
- if [ -f $$f ]; then \
- echo "Found Source File: $$f" ; \
- else \
- echo "Source File Not Found: $$f" ; \
- fi; \
- done
-
-size:
- @echo $(MSG_SIZE_CMD) Determining size of \"$(TARGET).elf\"
- @if test -f $(TARGET).elf; then \
- avr-size $(SIZE_MCU_FLAG) $(SIZE_FORMAT_FLAG) $(TARGET).elf ; 2>/dev/null; \
- fi
-
-.PHONY: begin hex lss end size
-all: begin hex end size
-
-elf: $(TARGET).elf
-hex: $(TARGET).hex $(TARGET).eep
-lss: $(TARGET).lss
-
-%.o: %.c
- @echo $(MSG_COMPILE_CMD) Compiling C file \"$^\"
- avr-gcc -c $(CC_FLAGS) -O$(OPTIMIZATION) --std=$(C_STANDARD) $< -o $@
-
-%.o: %.cpp
-%.o: %.c++
- @echo $(MSG_COMPILE_CMD) Compiling C++ file \"$^\"
- avr-gcc -c $(CC_FLAGS) -O$(OPTIMIZATION) --std=$(CPP_STANDARD) -x c++ $< -o $@
-
-%.o: %.S
- @echo $(MSG_COMPILE_CMD) Assembling \"$^\"
- avr-gcc -c $(CC_FLAGS) -x assembler-with-cpp $< -o $@
-
-.PRECIOUS : $(OBJECT_FILES)
-%.elf: $(OBJECT_FILES)
- @echo $(MSG_LINKER_CMD) Linking object files into \"$@\"
- avr-gcc $^ $(CC_FLAGS) $(LD_FLAGS) -o $@
-
-%.hex: %.elf
- @echo $(MSG_OBJCPY_CMD) Extracting HEX file data from \"$@\"
- avr-objcopy -O ihex -R .eeprom -R .fuse -R .lock -R .signature $< $@
-
-%.eep: %.elf
- @echo $(MSG_OBJCPY_CMD) Extracting EEP file data from \"$@\"
- avr-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O ihex $< $@ || exit 0
-
-%.lss: %.elf
- @echo $(MSG_OBJDMP_CMD) Extracting LSS file data from \"$@\"
- avr-objdump -h -S -z $< > $@
-
-clean:
- @echo $(MSG_REMOVE_CMD) Removing object files \"$(OBJECT_FILES)\"
- rm -f $(OBJECT_FILES)
- @echo $(MSG_REMOVE_CMD) Removing output files \"$(TARGET).elf $(TARGET).hex $(TARGET).eep $(TARGET).map $(TARGET).lss\"
- rm -f $(TARGET).elf $(TARGET).hex $(TARGET).eep $(TARGET).map $(TARGET).lss
|