diff options
Diffstat (limited to 'LUFA/Drivers/USB/Core')
| -rw-r--r-- | LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h | 2 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/Core/ConfigDescriptor.h | 2 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/Core/Events.h | 4 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/Core/HostStandardReq.h | 2 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/Core/StdDescriptors.h | 2 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/Core/UC3/USBController_UC3.h | 2 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h | 2 |
7 files changed, 8 insertions, 8 deletions
diff --git a/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h index 330dd981..8106988d 100644 --- a/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h +++ b/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h @@ -215,7 +215,7 @@ * from the \ref USB_Modes_t enum. * * \param[in] Options Mask indicating the options which should be used when initializing the USB - * interface to control the USB interface's behaviour. This should be comprised of + * interface to control the USB interface's behavior. This should be comprised of * a \c USB_OPT_REG_* mask to control the regulator, a \c USB_OPT_*_PLL mask to control the * PLL, and a \c USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device * mode speed. diff --git a/LUFA/Drivers/USB/Core/ConfigDescriptor.h b/LUFA/Drivers/USB/Core/ConfigDescriptor.h index 22e76cba..97fb39b5 100644 --- a/LUFA/Drivers/USB/Core/ConfigDescriptor.h +++ b/LUFA/Drivers/USB/Core/ConfigDescriptor.h @@ -213,7 +213,7 @@ * function. The routine updates the position and remaining configuration descriptor bytes values * automatically. If a comparator routine fails a search, the descriptor pointer is retreated back * so that the next descriptor search invocation will start from the descriptor which first caused the - * original search to fail. This behaviour allows for one comparator to be used immediately after another + * original search to fail. This behavior allows for one comparator to be used immediately after another * has failed, starting the second search from the descriptor which failed the first. * * Comparator functions should be standard functions which accept a pointer to the header of the current diff --git a/LUFA/Drivers/USB/Core/Events.h b/LUFA/Drivers/USB/Core/Events.h index 8d627d4f..f468b7e6 100644 --- a/LUFA/Drivers/USB/Core/Events.h +++ b/LUFA/Drivers/USB/Core/Events.h @@ -189,7 +189,7 @@ * \note For the microcontrollers with limited USB controller functionality, VBUS sensing is not available. * this means that the current connection state is derived from the bus suspension and wake up events by default, * which is not always accurate (host may suspend the bus while still connected). If the actual connection state - * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by + * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by * passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection * and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually. * \n\n @@ -207,7 +207,7 @@ * \note For the microcontrollers with limited USB controllers, VBUS sense is not available to the USB controller. * this means that the current connection state is derived from the bus suspension and wake up events by default, * which is not always accurate (host may suspend the bus while still connected). If the actual connection state - * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by + * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by * passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection * and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually. * \n\n diff --git a/LUFA/Drivers/USB/Core/HostStandardReq.h b/LUFA/Drivers/USB/Core/HostStandardReq.h index 5bdfe45e..6ad0d2e5 100644 --- a/LUFA/Drivers/USB/Core/HostStandardReq.h +++ b/LUFA/Drivers/USB/Core/HostStandardReq.h @@ -91,7 +91,7 @@ /* Global Variables: */ /** Indicates the currently set configuration number of the attached device. This indicates the currently - * selected configuration value if one has been set sucessfully, or 0 if no configuration has been selected. + * selected configuration value if one has been set successfully, or 0 if no configuration has been selected. * * To set a device configuration, call the \ref USB_Host_SetDeviceConfiguration() function. * diff --git a/LUFA/Drivers/USB/Core/StdDescriptors.h b/LUFA/Drivers/USB/Core/StdDescriptors.h index c46129c4..031e01d2 100644 --- a/LUFA/Drivers/USB/Core/StdDescriptors.h +++ b/LUFA/Drivers/USB/Core/StdDescriptors.h @@ -105,7 +105,7 @@ /** \name USB Configuration Descriptor Attribute Masks */ //@{ /** Mask for the reserved bit in the Configuration Descriptor's \c ConfigAttributes field, which must be set on all - * devices for historial purposes. + * devices for historical purposes. */ #define USB_CONFIG_ATTR_RESERVED 0x80 diff --git a/LUFA/Drivers/USB/Core/UC3/USBController_UC3.h b/LUFA/Drivers/USB/Core/UC3/USBController_UC3.h index 92e245ca..4a5d267c 100644 --- a/LUFA/Drivers/USB/Core/UC3/USBController_UC3.h +++ b/LUFA/Drivers/USB/Core/UC3/USBController_UC3.h @@ -172,7 +172,7 @@ * from the \ref USB_Modes_t enum. * * \param[in] Options Mask indicating the options which should be used when initializing the USB - * interface to control the USB interface's behaviour. This should be comprised of + * interface to control the USB interface's behavior. This should be comprised of * a \c USB_OPT_REG_* mask to control the regulator, a \c USB_OPT_*_PLL mask to control the * PLL, and a \c USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device * mode speed. diff --git a/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h b/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h index 25402e85..e1c782db 100644 --- a/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h +++ b/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h @@ -180,7 +180,7 @@ * from the \ref USB_Modes_t enum. * * \param[in] Options Mask indicating the options which should be used when initializing the USB - * interface to control the USB interface's behaviour. This should be comprised of + * interface to control the USB interface's behavior. This should be comprised of * a \c USB_OPT_REG_* mask to control the regulator, a \c USB_OPT_*_PLL mask to control the * PLL, and a \c USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device * mode speed. |