| Age | Commit message (Collapse) | Author |
|
files, rather than makefile defines.
git-svn-id: http://lufa-lib.googlecode.com/svn/branches/AppConfigHeaders@2195 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
configuration, rather than makefile defined macros.
git-svn-id: http://lufa-lib.googlecode.com/svn/branches/AppConfigHeaders@2192 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
favour of a hardware timer, to allow for use in devices with WDTRST fuse programmed.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@2127 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
to 32, to prevent communication errors on low quality connections to a target.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@2082 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
serial and data is always received regardless of attached or non-attached target.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@2055 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
Make an explicit constant name for the CMDEX bit of the target's NVM command register in the AVRISP-MKII Clone project.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@2040 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
latest version of AVR Studio (version 5.1).
Changed the AVRISP-MKII Clone programmer project to report a fixed 3.3V VTARGET voltage on USB AVRs lacking an ADC instead of 5V to prevent warnings in AVR Studio 5.1 when programming XMEGA devices.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@2038 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@2026 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@2025 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
programming the EEPROM on an ATMEGA8 (thanks to Martin Kelling).
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@2016 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
good reason to restrict parameter reads. Fix misspelt target reset polarity EEPROM variable.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@2011 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
trailing whitespace at the end of each line.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@2007 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
programming session is exited.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@2000 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
protocols (thanks to Justin Mattair).
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1947 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
protocols (thanks to Justin Mattair).
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1937 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
to Russian translation services provided by Andrey from Microsin.ru.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1782 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1772 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
Added missing Audio class control request definitions.
Added support for the Audio class GET STATUS request so that it is correctly ACKed when sent by the host.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1771 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
and masks to preserve endianness across different architectures.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1738 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
Endpoint_Discard_* functions to use the number of bits instead of a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures.
Renamed all low level Pipe_Read_*, Pipe_Write_* and Pipe_Discard_* functions to use the number of bits instead of a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1726 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
packet is a round multiple of the endpoint bank size under avrdude (thanks to Steffan Woltjer).
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1651 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
peripheral driver instead through the new Serial_CreateStream() and Serial_CreateBlockingStream() methods.
Renamed the Serial byte send/receive functions to remain consistent with the CDC driver's byte functions.
Altered the serial byte receive function to make it non-blocking.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1646 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
timeouts, to reduce CPU usage and free timer 0 for other uses in the future.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1640 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
parameter now points to a location where the number of bytes in the transfer that have been completed can be stored (or NULL if entire transaction should be performed in one chunk).
Added new Endpoint_Null_Stream() and Pipe_Null_stream() functions.
Removed the NO_STREAM_CALLBACKS compile time option due to the new partial stream transfer feature replacing it.
Fixed errors in the incomplete Test and Measurement device demo preventing proper operation (thanks to Pavel Plotnikov).
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1628 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1622 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
value to give maximum throughput.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1588 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
XPROGTarget_SendIdle(), as it is sending idle bits and not break bits.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1583 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
automatically after exiting TPI programming mode.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1582 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
issues with the XPLAINBridge when PDI programming at faster rates.
Speed up XMEGANVM_WaitWhileNVMControllerBusy() by preloading the status register address into the pointer register of the target's NVM controller and then reading via a faster indirect load command.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1581 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
clone programmer project (thanks to Tom Light).
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1580 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1578 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
instead of the desired 500KHz.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1577 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
redirect domain, including the new aliased links for LUFA-related pages such as the various download/source control mirrors and support lists.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1541 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
tool made by Laszlo Monda
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1524 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
CMDEX bit - this appears to be an error in the XMEGA manual external memory programming table.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1512 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
XMEGA targets.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1511 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
via a new software SPI driver.
Added new SPI_ORDER_* data order masks to the SPI peripheral driver.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1415 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
and TPI requests return failure.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1403 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
parameters, one per line, for better readability.
Add missing const qualifiers to the demos.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1400 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
single command should ever exceed the maximum timeout period. Extend timeout period to 1 second per command, so that an accidental timeout will never occur.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1385 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
than looping on the timeout value, as this is already checked inside the loop anyway.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1353 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1344 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
the new 1.7 Doxygen's default stylesheet is much better.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1341 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1336 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1312 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
XMEGA targets when writing to the EEPROM instead of the split write-only command (thanks to Tim Margush).
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1262 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
commands when the extended address boundary is crossed during programming or readback (thanks to Gerard Sexton).
Fixed warnings when building the AVRISP-MKII clone project with the ENABLE_XPROG_PROTOCOL compile time option disabled.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1257 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
correctly converted to the target system's native end of line style.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1248 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
was very buggy. PDI and TPI must now be implemented via seperate headers instead of the one unified ISP/TPI/PDI header.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1234 d5102386-fcda-11dd-9fdb-3debd5008f28
|
|
that the stream functions early-abort if the bus is suspended before or during a transfer.
git-svn-id: http://lufa-lib.googlecode.com/svn/trunk@1230 d5102386-fcda-11dd-9fdb-3debd5008f28
|