Small adjustments to PCB.

8 files changed, 36 insertions, 1 deletions

diff --git a/Orone-mini-v0/Orone-mini-S8A-v0r001/Orone-mini-S8A-v0r001.png b/Orone-mini-v0/Orone-mini-S8A-v0r001/Orone-mini-S8A-v0r001.png
deleted file mode 100644
index 7554da7..0000000
--- a/Orone-mini-v0/Orone-mini-S8A-v0r001/Orone-mini-S8A-v0r001.png
+++ /dev/null
diff --git a/Orone-mini-v0/Orone-mini-S8D-v0r001/Orone-mini-S8D-v0r001.brd b/Orone-mini-v0/Orone-mini-S8D-v0r001/Orone-mini-S8D-v0r001.brd
index 6cd53ed..2c6a343 100644
--- a/Orone-mini-v0/Orone-mini-S8D-v0r001/Orone-mini-S8D-v0r001.brd
+++ b/Orone-mini-v0/Orone-mini-S8D-v0r001/Orone-mini-S8D-v0r001.brd
diff --git a/Orone-mini-v0/Orone-mini-S8D-v0r001/Orone-mini-S8D-v0r001.pdf b/Orone-mini-v0/Orone-mini-S8D-v0r001/Orone-mini-S8D-v0r001.pdf
index dababa3..f85cfe3 100644
--- a/Orone-mini-v0/Orone-mini-S8D-v0r001/Orone-mini-S8D-v0r001.pdf
+++ b/Orone-mini-v0/Orone-mini-S8D-v0r001/Orone-mini-S8D-v0r001.pdf
diff --git a/Orone-mini-v0/Orone-mini-S8D-v0r001/Orone-mini-S8D-v0r001.png b/Orone-mini-v0/Orone-mini-S8D-v0r001/Orone-mini-S8D-v0r001.png
index e9bca5d..b91875d 100644
--- a/Orone-mini-v0/Orone-mini-S8D-v0r001/Orone-mini-S8D-v0r001.png
+++ b/Orone-mini-v0/Orone-mini-S8D-v0r001/Orone-mini-S8D-v0r001.png
diff --git a/Orone-mini-v0/Orone-mini-S8D-v0r001/Orone-mini-S8D-v0r001.sch b/Orone-mini-v0/Orone-mini-S8D-v0r001/Orone-mini-S8D-v0r001.sch
index 40898f3..0e23627 100644
--- a/Orone-mini-v0/Orone-mini-S8D-v0r001/Orone-mini-S8D-v0r001.sch
+++ b/Orone-mini-v0/Orone-mini-S8D-v0r001/Orone-mini-S8D-v0r001.sch
diff --git a/Orone-mini-v0/Orone-mini-S8D-v0r001/Orone-mini-S8D-v0r001.top.pdf b/Orone-mini-v0/Orone-mini-S8D-v0r001/Orone-mini-S8D-v0r001.top.pdf
index f6a6cea..b3ae06d 100644
--- a/Orone-mini-v0/Orone-mini-S8D-v0r001/Orone-mini-S8D-v0r001.top.pdf
+++ b/Orone-mini-v0/Orone-mini-S8D-v0r001/Orone-mini-S8D-v0r001.top.pdf
diff --git a/Orone-mini-v0/Orone-mini-S8D-v0r001/README-PCB.txt b/Orone-mini-v0/Orone-mini-S8D-v0r001/README-PCB.txt
new file mode 100644
index 0000000..13d9e69
--- /dev/null
+++ b/Orone-mini-v0/Orone-mini-S8D-v0r001/README-PCB.txt
@@ -0,0 +1,35 @@
+Orone-mini-S8D-v0r001
+Copyright 2013 G Bulmer
+
+This work is licensed under a Creative Commons Attribution-ShareAlike 3.0 Unported License.
+I ask that my name remain visible in the copper.
+
+The pin headers are standard 'breadboard friendly' 0.1" pitch.
+The two rows of pin headers are 0.8" apart, and hence fit a single breadboard.
+The board is 2.3" long x 1" high. Most components are 1206 or larger.
+
+1206 components are too big to fit in mini-like 2.1" length
+Hence the board is lengthened from 2.1" to 2.3"
+Replaced C1 with 7343-case size
+
+Design Rules: OSHPark.com & Seeedstudio 'Fusion' PCB Service
+
+Routing
+Crystal tracks & Top Layer MCU tracks are 6mil/6mil in order to make enough space for components and isolation.
+All tracks from thru-hole (hand soldered) components, except pin headers, are 10mil or wider. This is intended to make the tracks more robust.
+
+All Bottom Layer tracks are 10mil or bigger, except Crystal tracks; this is intended to be easier to make.
+
+Copper pours have 10mil isolation; this is intended to be easier to make.
+
+Vias: The three via shapes are used to give information, and help 'read' the PCB.
+VIA KEY
+SQUARE:  Digital Ground (DGND) and thermal vias
+ROUND:   Signal
+OCTAGON: Power (e.g. Vcc) or segregated Ground (e.g. AGND)
+
+Notes
+There are four Hidden Airwires, which do not need routing (replicated on switches)
+For safety, type 'RATSNEST *' to make them visible before making any changes
+Two pads 33 and DISC, printed at 45 degrees, are signals, and not for components.
+DRC->Restring Pads & Vias minimum increased from OSHPark 7mil to 10mil to support more PCB manufacturers design rules by providing larger annular rings.
diff --git a/Orone-mini-v0/README.md b/Orone-mini-v0/README.md
index e5146b8..a4b4601 100644
--- a/Orone-mini-v0/README.md
+++ b/Orone-mini-v0/README.md
@@ -79,4 +79,4 @@ There are several sets of Design Rule check errors which are flagged by Eagle. N
 
 Thanks to
 ---------
-Mark Rafter and Jeff Smith; Pete Harrison, Tony Wilcox, Chris Evans and David Hannaford of Midlands Micromouse and Robotics Club for advice, encouragement and expertise; Keith, Pete and Bill of Techwizz for discussions and feedback; Siy, feurig, ala42, Crenn, and everyone who contributed at LeafLabs forum. Special thanks to LeafLabs for developing the Maple-IDE and Maple-mini.
+Mark Rafter and Jeff Smith; Pete Harrison, Tony Wilcox, Chris Evans and David Hannaford of Midlands Micromouse and Robotics Club for advice, encouragement and expertise; Keith, Pete and Bill of Techwizz for discussions and feedback; Siy, feurig, ala42, Crenn, and everyone who contributed at LeafLabs forum; Laen of OSHPark.com for PCB & CAM help and expertise. Special thanks to LeafLabs for developing the Maple-IDE and Maple-mini.