Merge pull request #1445 from chalei/chalei-ID-translate

Create ID.po to Merge Bahasa Indonesia String internationalization

9 files changed, 2820 insertions, 233 deletions

diff --git a/locale/ID.po b/locale/ID.po
new file mode 100644
index 000000000..405b3a0e3
--- /dev/null
+++ b/locale/ID.po
@@ -0,0 +1,2587 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2019-01-10 11:05-0800\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"Language: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: extmod/machine_i2c.c:299
+msgid "invalid I2C peripheral"
+msgstr "perangkat I2C tidak valid"
+
+#: extmod/machine_i2c.c:340 extmod/machine_i2c.c:354 extmod/machine_i2c.c:368
+#: extmod/machine_i2c.c:392
+msgid "I2C operation not supported"
+msgstr "operasi I2C tidak didukung"
+
+#: extmod/machine_mem.c:45 ports/unix/modmachine.c:53
+#, c-format
+msgid "address %08x is not aligned to %d bytes"
+msgstr "alamat %08x tidak selaras dengan %d bytes"
+
+#: extmod/machine_spi.c:57
+msgid "invalid SPI peripheral"
+msgstr "perangkat SPI tidak valid"
+
+#: extmod/machine_spi.c:124
+msgid "buffers must be the same length"
+msgstr "buffers harus mempunyai panjang yang sama"
+
+#: extmod/machine_spi.c:207
+msgid "bits must be 8"
+msgstr "bits harus memilki nilai 8"
+
+#: extmod/machine_spi.c:210
+msgid "firstbit must be MSB"
+msgstr "bit pertama(firstbit) harus berupa MSB"
+
+#: extmod/machine_spi.c:215
+msgid "must specify all of sck/mosi/miso"
+msgstr "harus menentukan semua pin sck/mosi/miso"
+
+#: extmod/modframebuf.c:299
+msgid "invalid format"
+msgstr "format tidak valid"
+
+#: extmod/modubinascii.c:38 extmod/moduhashlib.c:102
+msgid "a bytes-like object is required"
+msgstr "sebuah objek menyerupai byte (bytes-like) dibutuhkan"
+
+#: extmod/modubinascii.c:90
+msgid "odd-length string"
+msgstr "panjang data string memiliki keganjilan (odd-length)"
+
+#: extmod/modubinascii.c:101
+msgid "non-hex digit found"
+msgstr "digit non-hex ditemukan"
+
+#: extmod/modubinascii.c:169
+msgid "incorrect padding"
+msgstr "lapisan (padding) tidak benar"
+
+#: extmod/moductypes.c:122
+msgid "syntax error in uctypes descriptor"
+msgstr "sintaksis error pada pendeskripsi uctypes"
+
+#: extmod/moductypes.c:219
+msgid "Cannot unambiguously get sizeof scalar"
+msgstr "tidak dapat mendapatkan ukuran scalar secara tidak ambigu"
+
+#: extmod/moductypes.c:397
+msgid "struct: no fields"
+msgstr "struct: tidak ada fields"
+
+#: extmod/moductypes.c:530
+msgid "struct: cannot index"
+msgstr "struct: tidak bisa melakukan index"
+
+#: extmod/moductypes.c:544
+msgid "struct: index out of range"
+msgstr "struct: index keluar dari jangkauan"
+
+#: extmod/moduheapq.c:38
+msgid "heap must be a list"
+msgstr "heap harus berupa sebuah list"
+
+#: extmod/moduheapq.c:86 extmod/modutimeq.c:147 extmod/modutimeq.c:172
+msgid "empty heap"
+msgstr "heap kosong"
+
+#: extmod/modujson.c:281
+msgid "syntax error in JSON"
+msgstr "sintaksis error pada JSON"
+
+#: extmod/modure.c:161
+msgid "Splitting with sub-captures"
+msgstr "Memisahkan dengan menggunakan sub-captures"
+
+#: extmod/modure.c:207
+msgid "Error in regex"
+msgstr "Error pada regex"
+
+#: extmod/modussl_axtls.c:81
+msgid "invalid key"
+msgstr "key tidak valid"
+
+#: extmod/modussl_axtls.c:87
+msgid "invalid cert"
+msgstr "cert tidak valid"
+
+#: extmod/modutimeq.c:131
+msgid "queue overflow"
+msgstr "antrian meluap (overflow)"
+
+#: extmod/moduzlib.c:98
+msgid "compression header"
+msgstr "kompresi header"
+
+#: extmod/uos_dupterm.c:120
+msgid "invalid dupterm index"
+msgstr "indeks dupterm tidak valid"
+
+#: extmod/vfs_fat.c:426 py/moduerrno.c:154
+msgid "Read-only filesystem"
+msgstr "sistem file (filesystem) bersifat Read-only"
+
+#: extmod/vfs_posix_file.c:48 ports/unix/file.c:50 py/objstringio.c:43
+msgid "I/O operation on closed file"
+msgstr "operasi I/O pada file tertutup"
+
+#: lib/embed/abort_.c:8
+msgid "abort() called"
+msgstr "abort() dipanggil"
+
+#: lib/netutils/netutils.c:83
+msgid "invalid arguments"
+msgstr "argumen-argumen tidak valid"
+
+#: lib/utils/pyexec.c:97 py/builtinimport.c:251
+msgid "script compilation not supported"
+msgstr "kompilasi script tidak didukung"
+
+#: main.c:150
+msgid " output:\n"
+msgstr "output:\n"
+
+#: main.c:164 main.c:237
+msgid ""
+"Auto-reload is on. Simply save files over USB to run them or enter REPL to "
+"disable.\n"
+msgstr ""
+"Auto-reload aktif. Silahkan simpan data-data (files) melalui USB untuk "
+"menjalankannya atau masuk ke REPL untukmenonaktifkan.\n"
+
+#: main.c:166
+msgid "Running in safe mode! Auto-reload is off.\n"
+msgstr "Berjalan di mode aman(safe mode)! Auto-reload tidak aktif.\n"
+
+#: main.c:168 main.c:239
+msgid "Auto-reload is off.\n"
+msgstr "Auto-reload tidak aktif.\n"
+
+#: main.c:182
+msgid "Running in safe mode! Not running saved code.\n"
+msgstr ""
+"Berjalan di mode aman(safe mode)! tidak menjalankan kode yang tersimpan.\n"
+
+#: main.c:198
+msgid "WARNING: Your code filename has two extensions\n"
+msgstr "PERINGATAN: Nama file kode anda mempunyai dua ekstensi\n"
+
+#: main.c:244
+msgid "Press any key to enter the REPL. Use CTRL-D to reload."
+msgstr ""
+"Tekan tombol apa saja untuk masuk ke dalam REPL. Gunakan CTRL+D untuk reset "
+"(Reload)"
+
+#: main.c:407
+msgid "soft reboot\n"
+msgstr "memulai ulang software(soft reboot)\n"
+
+#: ports/atmel-samd/audio_dma.c:209
+#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c:361
+msgid "All sync event channels in use"
+msgstr "Semua channel event yang disinkronisasi sedang digunakan"
+
+#: ports/atmel-samd/bindings/samd/Clock.c:135
+msgid "calibration is read only"
+msgstr "kalibrasi adalah read only"
+
+#: ports/atmel-samd/bindings/samd/Clock.c:137
+msgid "calibration is out of range"
+msgstr "kalibrasi keluar dari jangkauan"
+
+#: ports/atmel-samd/board_busses.c:59 ports/nrf/board_busses.c:39
+msgid "No default I2C bus"
+msgstr "Tidak ada standar bus I2C"
+
+#: ports/atmel-samd/board_busses.c:85 ports/nrf/board_busses.c:64
+msgid "No default SPI bus"
+msgstr "Tidak ada standar bus SPI"
+
+#: ports/atmel-samd/board_busses.c:112 ports/nrf/board_busses.c:91
+msgid "No default UART bus"
+msgstr "Tidak ada standar bus UART"
+
+#: ports/atmel-samd/common-hal/analogio/AnalogIn.c:63
+#: ports/nrf/common-hal/analogio/AnalogIn.c:39
+msgid "Pin does not have ADC capabilities"
+msgstr "Pin tidak mempunya kemampuan untuk ADC (Analog Digital Converter)"
+
+#: ports/atmel-samd/common-hal/analogio/AnalogOut.c:49
+msgid "No DAC on chip"
+msgstr "Tidak ada DAC (Digital Analog Converter) di dalam chip"
+
+#: ports/atmel-samd/common-hal/analogio/AnalogOut.c:56
+msgid "AnalogOut not supported on given pin"
+msgstr "pin yang dipakai tidak mendukung AnalogOut"
+
+#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c:147
+#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c:150
+msgid "Invalid bit clock pin"
+msgstr "Bit clock pada pin tidak valid"
+
+#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c:153
+msgid "Bit clock and word select must share a clock unit"
+msgstr "Bit clock dan word harus memiliki kesamaan pada clock unit"
+
+#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c:156
+#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c:130
+msgid "Invalid data pin"
+msgstr "data pin tidak valid"
+
+#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c:169
+#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c:174
+#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c:145
+#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c:150
+msgid "Serializer in use"
+msgstr "Serializer sedang digunakan"
+
+#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c:230
+msgid "Clock unit in use"
+msgstr "Clock unit sedang digunakan"
+
+#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c:240
+#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c:172
+msgid "Unable to find free GCLK"
+msgstr "Tidak dapat menemukan GCLK yang kosong"
+
+#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c:254
+msgid "Too many channels in sample."
+msgstr "Terlalu banyak channel dalam sampel"
+
+#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c:305
+#: ports/atmel-samd/common-hal/audioio/AudioOut.c:417
+msgid "No DMA channel found"
+msgstr "tidak ada channel DMA ditemukan"
+
+#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c:308
+#: ports/atmel-samd/common-hal/audioio/AudioOut.c:419
+msgid "Unable to allocate buffers for signed conversion"
+msgstr "Tidak dapat mengalokasikan buffer untuk signed conversion"
+
+#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c:109
+msgid "Invalid clock pin"
+msgstr "Clock pada pin tidak valid"
+
+#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c:134
+msgid "Only 8 or 16 bit mono with "
+msgstr "Hanya 8 atau 16 bit mono dengan "
+
+#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c:167
+msgid "sampling rate out of range"
+msgstr "nilai sampling keluar dari jangkauan"
+
+#: ports/atmel-samd/common-hal/audioio/AudioOut.c:132
+msgid "DAC already in use"
+msgstr "DAC sudah digunakan"
+
+#: ports/atmel-samd/common-hal/audioio/AudioOut.c:136
+msgid "Right channel unsupported"
+msgstr "Channel Kanan tidak didukung"
+
+#: ports/atmel-samd/common-hal/audioio/AudioOut.c:139
+#: ports/atmel-samd/common-hal/pulseio/PWMOut.c:116
+#: ports/atmel-samd/common-hal/touchio/TouchIn.c:65
+msgid "Invalid pin"
+msgstr "Pin tidak valid"
+
+#: ports/atmel-samd/common-hal/audioio/AudioOut.c:147
+msgid "Invalid pin for left channel"
+msgstr "Pin untuk channel kiri tidak valid"
+
+#: ports/atmel-samd/common-hal/audioio/AudioOut.c:151
+msgid "Invalid pin for right channel"
+msgstr "Pin untuk channel kanan tidak valid"
+
+#: ports/atmel-samd/common-hal/audioio/AudioOut.c:154
+msgid "Cannot output both channels on the same pin"
+msgstr ""
+"Tidak dapat menggunakan output di kedua channel dengan menggunakan pin yang "
+"sama"
+
+#: ports/atmel-samd/common-hal/audioio/AudioOut.c:243
+#: ports/atmel-samd/common-hal/pulseio/PWMOut.c:189
+#: ports/atmel-samd/common-hal/pulseio/PulseOut.c:110
+#: ports/nrf/common-hal/pulseio/PulseOut.c:107
+msgid "All timers in use"
+msgstr "Semua timer sedang digunakan"
+
+#: ports/atmel-samd/common-hal/audioio/AudioOut.c:285
+msgid "All event channels in use"
+msgstr "Semua channel event sedang digunakan"
+
+#: ports/atmel-samd/common-hal/audioio/AudioOut.c:375
+#, c-format
+msgid "Sample rate too high. It must be less than %d"
+msgstr "Nilai sampel terlalu tinggi. Nilai harus kurang dari %d"
+
+#: ports/atmel-samd/common-hal/busio/I2C.c:71
+msgid "Not enough pins available"
+msgstr "Pin yang tersedia tidak cukup"
+
+#: ports/atmel-samd/common-hal/busio/I2C.c:78
+#: ports/atmel-samd/common-hal/busio/SPI.c:171
+#: ports/atmel-samd/common-hal/busio/UART.c:120
+#: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c:45
+#: ports/nrf/common-hal/busio/I2C.c:84
+msgid "Invalid pins"
+msgstr "Pin-pin tidak valid"
+
+#: ports/atmel-samd/common-hal/busio/I2C.c:101
+msgid "SDA or SCL needs a pull up"
+msgstr "SDA atau SCL membutuhkan pull up"
+
+#: ports/atmel-samd/common-hal/busio/I2C.c:121
+msgid "Unsupported baudrate"
+msgstr "Baudrate tidak didukung"
+
+#: ports/atmel-samd/common-hal/busio/UART.c:67
+msgid "bytes > 8 bits not supported"
+msgstr "byte > 8 bit tidak didukung"
+
+#: ports/atmel-samd/common-hal/busio/UART.c:73
+#: ports/nrf/common-hal/busio/UART.c:118
+msgid "tx and rx cannot both be None"
+msgstr "tx dan rx keduanya tidak boleh kosong"
+
+#: ports/atmel-samd/common-hal/busio/UART.c:146
+#: ports/nrf/common-hal/busio/UART.c:152
+msgid "Failed to allocate RX buffer"
+msgstr "Gagal untuk mengalokasikan buffer RX"
+
+#: ports/atmel-samd/common-hal/busio/UART.c:154
+msgid "Could not initialize UART"
+msgstr "Tidak dapat menginisialisasi UART"
+
+#: ports/atmel-samd/common-hal/busio/UART.c:241
+#: ports/nrf/common-hal/busio/UART.c:197
+msgid "No RX pin"
+msgstr "Tidak pin RX"
+
+#: ports/atmel-samd/common-hal/busio/UART.c:300
+#: ports/nrf/common-hal/busio/UART.c:232
+msgid "No TX pin"
+msgstr "Tidak ada pin TX"
+
+#: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c:170
+#: ports/nrf/common-hal/digitalio/DigitalInOut.c:147
+msgid "Cannot get pull while in output mode"
+msgstr "Tidak bisa mendapatkan pull pada saat mode output"
+
+#: ports/atmel-samd/common-hal/microcontroller/__init__.c:74
+#: ports/esp8266/common-hal/microcontroller/__init__.c:64
+msgid "Cannot reset into bootloader because no bootloader is present."
+msgstr ""
+"Tidak dapat melakukan reset ke bootloader karena tidak ada bootloader yang "
+"terisi"
+
+#: ports/atmel-samd/common-hal/pulseio/PWMOut.c:120
+#: ports/atmel-samd/common-hal/pulseio/PWMOut.c:369
+#: ports/nrf/common-hal/pulseio/PWMOut.c:119
+#: ports/nrf/common-hal/pulseio/PWMOut.c:233
+msgid "Invalid PWM frequency"
+msgstr "Frekuensi PWM tidak valid"
+
+#: ports/atmel-samd/common-hal/pulseio/PWMOut.c:187
+msgid "All timers for this pin are in use"
+msgstr "Semua timer untuk pin ini sedang digunakan"
+
+#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:110
+msgid "No hardware support on pin"
+msgstr "Tidak ada dukungan hardware untuk pin"
+
+#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:113
+msgid "EXTINT channel already in use"
+msgstr "Channel EXTINT sedang digunakan"
+
+#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:118
+#: ports/esp8266/common-hal/pulseio/PulseIn.c:86
+#, c-format
+msgid "Failed to allocate RX buffer of %d bytes"
+msgstr "Gagal untuk megalokasikan buffer RX dari %d byte"
+
+#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:205
+#: ports/esp8266/common-hal/pulseio/PulseIn.c:151
+msgid "pop from an empty PulseIn"
+msgstr "Muncul dari PulseIn yang kosong"
+
+#: ports/atmel-samd/common-hal/pulseio/PulseIn.c:237
+#: ports/esp8266/common-hal/pulseio/PulseIn.c:182 py/obj.c:422
+msgid "index out of range"
+msgstr "index keluar dari jangkauan"
+
+#: ports/atmel-samd/common-hal/pulseio/PulseOut.c:178
+msgid "Another send is already active"
+msgstr "Send yang lain sudah aktif"
+
+#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c:38
+msgid "Both pins must support hardware interrupts"
+msgstr "Kedua pin harus mendukung hardware interrut"
+
+#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c:46
+msgid "A hardware interrupt channel is already in use"
+msgstr "Sebuah channel hardware interrupt sedang digunakan"
+
+#: ports/atmel-samd/common-hal/rtc/RTC.c:101
+msgid "calibration value out of range +/-127"
+msgstr "nilai kalibrasi keluar dari jangkauan +/-127"
+
+#: ports/atmel-samd/common-hal/touchio/TouchIn.c:75
+msgid "No free GCLKs"
+msgstr "Tidak ada GCLK yang kosong"
+
+#: ports/esp8266/common-hal/analogio/AnalogIn.c:43
+msgid "Pin %q does not have ADC capabilities"
+msgstr "Pin %q tidak memiliki kemampuan ADC"
+
+#: ports/esp8266/common-hal/analogio/AnalogOut.c:39
+msgid "No hardware support for analog out."
+msgstr "Tidak dukungan hardware untuk analog out."
+
+#: ports/esp8266/common-hal/busio/SPI.c:72
+msgid "Pins not valid for SPI"
+msgstr "Pin-pin tidak valid untuk SPI"
+
+#: ports/esp8266/common-hal/busio/UART.c:45
+msgid "Only tx supported on UART1 (GPIO2)."
+msgstr "Hanya tx yang mendukung pada UART1 (GPIO2)."
+
+#: ports/esp8266/common-hal/busio/UART.c:67 ports/esp8266/machine_uart.c:108
+msgid "invalid data bits"
+msgstr "bit data tidak valid"
+
+#: ports/esp8266/common-hal/busio/UART.c:91 ports/esp8266/machine_uart.c:144
+msgid "invalid stop bits"
+msgstr "stop bit tidak valid"
+
+#: ports/esp8266/common-hal/digitalio/DigitalInOut.c:200
+msgid "ESP8266 does not support pull down."
+msgstr "ESP866 tidak mendukung pull down"
+
+#: ports/esp8266/common-hal/digitalio/DigitalInOut.c:210
+msgid "GPIO16 does not support pull up."
+msgstr "GPIO16 tidak mendukung pull up"
+
+#: ports/esp8266/common-hal/microcontroller/__init__.c:66
+msgid "ESP8226 does not support safe mode."
+msgstr "ESP8266 tidak mendukung safe mode"
+
+#: ports/esp8266/common-hal/pulseio/PWMOut.c:54
+#: ports/esp8266/common-hal/pulseio/PWMOut.c:113
+#, c-format
+msgid "Maximum PWM frequency is %dhz."
+msgstr "Nilai maksimum frekuensi PWM adalah %dhz"
+
+#: ports/esp8266/common-hal/pulseio/PWMOut.c:57
+#: ports/esp8266/common-hal/pulseio/PWMOut.c:116
+msgid "Minimum PWM frequency is 1hz."
+msgstr "Nilai minimum frekuensi PWM is 1hz"
+
+#: ports/esp8266/common-hal/pulseio/PWMOut.c:68
+#, c-format
+msgid "Multiple PWM frequencies not supported. PWM already set to %dhz."
+msgstr "Nilai Frekuensi PWM ganda tidak didukung. PWM sudah diatur pada %dhz"
+
+#: ports/esp8266/common-hal/pulseio/PWMOut.c:77 ports/esp8266/machine_pwm.c:70
+#, c-format
+msgid "PWM not supported on pin %d"
+msgstr "PWM tidak didukung pada pin %d"
+
+#: ports/esp8266/common-hal/pulseio/PulseIn.c:78
+msgid "No PulseIn support for %q"
+msgstr "Tidak ada dukungan PulseIn untuk %q"
+
+#: ports/esp8266/common-hal/storage/__init__.c:34
+msgid "Unable to remount filesystem"
+msgstr "Tidak dapat memasang filesystem kembali"
+
+#: ports/esp8266/common-hal/storage/__init__.c:38
+msgid "Use esptool to erase flash and re-upload Python instead"
+msgstr ""
+"Gunakan esptool untuk menghapus flash dan upload ulang Python sebagai "
+"gantinya"
+
+#: ports/esp8266/esp_mphal.c:154
+msgid "C-level assert"
+msgstr "Dukungan C-level"
+
+#: ports/esp8266/machine_adc.c:57
+#, c-format
+msgid "not a valid ADC Channel: %d"
+msgstr "tidak valid channel ADC: %d"
+
+#: ports/esp8266/machine_hspi.c:131 ports/esp8266/machine_hspi.c:137
+msgid "impossible baudrate"
+msgstr "baudrate tidak memungkinkan"
+
+#: ports/esp8266/machine_pin.c:129
+msgid "expecting a pin"
+msgstr "mengharapkan sebuah pin"
+
+#: ports/esp8266/machine_pin.c:284
+msgid "Pin(16) doesn't support pull"
+msgstr "Pin(16) tidak mendukung pull"
+
+#: ports/esp8266/machine_pin.c:323
+msgid "invalid pin"
+msgstr "pin tidak valid"
+
+#: ports/esp8266/machine_pin.c:389
+msgid "pin does not have IRQ capabilities"
+msgstr "pin tidak memiliki kemampuan IRQ"
+
+#: ports/esp8266/machine_rtc.c:185
+msgid "buffer too long"
+msgstr "buffer terlalu panjang"
+
+#: ports/esp8266/machine_rtc.c:209 ports/esp8266/machine_rtc.c:223
+#: ports/esp8266/machine_rtc.c:246
+msgid "invalid alarm"
+msgstr "alarm tidak valid"
+
+#: ports/esp8266/machine_uart.c:169
+#, c-format
+msgid "UART(%d) does not exist"
+msgstr "UART(%d) tidak ada"
+
+#: ports/esp8266/machine_uart.c:219
+msgid "UART(1) can't read"
+msgstr "UART(1) tidak dapat dibaca"
+
+#: ports/esp8266/modesp.c:119
+msgid "len must be multiple of 4"
+msgstr "len harus kelipatan dari 4"
+
+#: ports/esp8266/modesp.c:274
+#, c-format
+msgid "memory allocation failed, allocating %u bytes for native code"
+msgstr "alokasi memori gagal, mengalokasikan %u byte untuk kode native"
+
+#: ports/esp8266/modesp.c:317
+msgid "flash location must be below 1MByte"
+msgstr "alokasi flash harus dibawah 1MByte"
+
+#: ports/esp8266/modmachine.c:63
+msgid "frequency can only be either 80Mhz or 160MHz"
+msgstr "frekuensi hanya bisa didefinisikan 80Mhz atau 160Mhz"
+
+#: ports/esp8266/modnetwork.c:61
+msgid "AP required"
+msgstr "AP dibutuhkan"
+
+#: ports/esp8266/modnetwork.c:61
+msgid "STA required"
+msgstr "STA dibutuhkan"
+
+#: ports/esp8266/modnetwork.c:87
+msgid "Cannot update i/f status"
+msgstr "Tidak dapat memperbarui status i/f"
+
+#: ports/esp8266/modnetwork.c:142
+msgid "Cannot set STA config"
+msgstr "Tidak dapat mengatur konfigurasi STA"
+
+#: ports/esp8266/modnetwork.c:144
+msgid "Cannot connect to AP"
+msgstr "Tidak dapat menyambungkan ke AP"
+
+#: ports/esp8266/modnetwork.c:152
+msgid "Cannot disconnect from AP"
+msgstr "Tidak dapat memutuskna dari AP"
+
+#: ports/esp8266/modnetwork.c:173
+msgid "unknown status param"
+msgstr "status param tidak diketahui"
+
+#: ports/esp8266/modnetwork.c:222
+msgid "STA must be active"
+msgstr "STA harus aktif"
+
+#: ports/esp8266/modnetwork.c:239
+msgid "scan failed"
+msgstr "scan gagal"
+
+#: ports/esp8266/modnetwork.c:306
+msgid "wifi_set_ip_info() failed"
+msgstr "wifi_set_ip_info() gagal"
+
+#: ports/esp8266/modnetwork.c:319
+msgid "either pos or kw args are allowed"
+msgstr "hanya antar pos atau kw args yang diperbolehkan"
+
+#: ports/esp8266/modnetwork.c:329
+msgid "can't get STA config"
+msgstr "tidak bisa mendapatkan konfigurasi STA"
+
+#: ports/esp8266/modnetwork.c:331
+msgid "can't get AP config"
+msgstr "tidak bisa mendapatkan konfigurasi AP"
+
+#: ports/esp8266/modnetwork.c:346
+msgid "invalid buffer length"
+msgstr "panjang buffer tidak valid"
+
+#: ports/esp8266/modnetwork.c:405
+msgid "can't set STA config"
+msgstr "tidak bisa mendapatkan konfigurasi STA"
+
+#: ports/esp8266/modnetwork.c:407
+msgid "can't set AP config"
+msgstr "tidak bisa mendapatkan konfigurasi AP"
+
+#: ports/esp8266/modnetwork.c:416
+msgid "can query only one param"
+msgstr "hanya bisa melakukan query satu param"
+
+#: ports/esp8266/modnetwork.c:469
+msgid "unknown config param"
+msgstr "konfigurasi param tidak diketahui"
+
+#: ports/nrf/common-hal/analogio/AnalogOut.c:37
+msgid "AnalogOut functionality not supported"
+msgstr "fungsionalitas AnalogOut tidak didukung"
+
+#: ports/nrf/common-hal/bleio/Adapter.c:41
+#, c-format
+msgid "Soft device assert, id: 0x%08lX, pc: 0x%08lX"
+msgstr "Dukungan soft device, id: 0x%08lX, pc: 0x%08l"
+
+#: ports/nrf/common-hal/bleio/Adapter.c:125
+#, c-format
+msgid "Failed to change softdevice state, error: 0x%08lX"
+msgstr "Gagal untuk merubah status softdevice, error: 0x%08lX"
+
+#: ports/nrf/common-hal/bleio/Adapter.c:135
+#, c-format
+msgid "Failed to get softdevice state, error: 0x%08lX"
+msgstr "Gagal untuk mendapatkan status softdevice, error: 0x%08lX"
+
+#: ports/nrf/common-hal/bleio/Adapter.c:155
+#, c-format
+msgid "Failed to get local address, error: 0x%08lX"
+msgstr "Gagal untuk mendapatkan alamat lokal, error: 0x%08lX"
+
+#: ports/nrf/common-hal/bleio/Characteristic.c:52
+#, c-format
+msgid "Failed to write gatts value, status: 0x%08lX"
+msgstr "Gagal untuk menulis nilai gatts, status: 0x%08lX"
+
+#: ports/nrf/common-hal/bleio/Characteristic.c:76
+#, c-format
+msgid "Failed to notify attribute value, status: 0x%08lX"
+msgstr "Gagal untuk melaporkan nilai atribut, status: 0x%08lX"
+
+#: ports/nrf/common-hal/bleio/Characteristic.c:91
+#, c-format
+msgid "Failed to read attribute value, status: 0x%08lX"
+msgstr "Gagal untuk membaca nilai atribut, status: 0x%08lX"
+
+#: ports/nrf/common-hal/bleio/Characteristic.c:119
+#: ports/nrf/common-hal/bleio/Device.c:272
+#: ports/nrf/common-hal/bleio/Device.c:307
+#, c-format
+msgid "Failed to acquire mutex, status: 0x%08lX"
+msgstr "Gagal untuk mendapatkan mutex, status: 0x%08lX"
+
+#: ports/nrf/common-hal/bleio/Characteristic.c:126
+#, c-format
+msgid "Failed to write attribute value, status: 0x%08lX"
+msgstr "Gagal untuk menulis nilai atribut, status: 0x%08lX"
+
+#: ports/nrf/common-hal/bleio/Characteristic.c:138
+#: ports/nrf/common-hal/bleio/Device.c:284
+#: ports/nrf/common-hal/bleio/Device.c:319
+#: ports/nrf/common-hal/bleio/Device.c:354
+#: ports/nrf/common-hal/bleio/Device.c:391
+#, c-format
+msgid "Failed to release mutex, status: 0x%08lX"
+msgstr "Gagal untuk melepaskan mutex, status: 0x%08lX"
+
+#: ports/nrf/common-hal/bleio/Device.c:81
+#: ports/nrf/common-hal/bleio/Device.c:114
+msgid "Can not fit data into the advertisment packet"
+msgstr "Tidak bisa menyesuaikan data ke dalam paket advertisment"
+
+#: ports/nrf/common-hal/bleio/Device.c:266
+#, fuzzy, c-format
+msgid "Failed to discover serivices, status: 0x%08lX"
+msgstr "Gagal untuk menemukan layanan, status: 0x%08lX"
+
+#: ports/nrf/common-hal/bleio/Device.c:403
+#: ports/nrf/common-hal/bleio/Scanner.c:76
+#, c-format
+msgid "Failed to continue scanning, status: 0x%0xlX"
+msgstr "Gagal untuk melanjutkan scanning, status: 0x%08lX"
+
+#: ports/nrf/common-hal/bleio/Device.c:436
+#, c-format
+msgid "Failed to connect, status: 0x%08lX"
+msgstr "Gagal untuk menyambungkan, status: 0x%08lX"
+
+#: ports/nrf/common-hal/bleio/Device.c:513
+#, c-format
+msgid "Failed to add service, status: 0x%08lX"
+msgstr "Gagal untuk menambahkan layanan, status: 0x%08lX"
+
+#: ports/nrf/common-hal/bleio/Device.c:531
+#, c-format
+msgid "Failed to start advertisment, status: 0x%08lX"
+msgstr "Gagal untuk memulai advertisement, status: 0x%08lX"
+
+#: ports/nrf/common-hal/bleio/Device.c:549
+#, c-format
+msgid "Failed to stop advertisment, status: 0x%08lX"
+msgstr "Gagal untuk memberhentikan advertisement, status: 0x%08lX"
+
+#: ports/nrf/common-hal/bleio/Device.c:575
+#: ports/nrf/common-hal/bleio/Scanner.c:103
+#, c-format
+msgid "Failed to start scanning, status: 0x%0xlX"
+msgstr "Gagal untuk melakukan scanning, status: 0x%08lX"
+
+#: ports/nrf/common-hal/bleio/Device.c:592
+#, c-format
+msgid "Failed to create mutex, status: 0x%0xlX"
+msgstr "Gagal untuk membuat mutex, status: 0x%08lX"
+
+#: ports/nrf/common-hal/bleio/Service.c:83
+#, c-format
+msgid "Failed to add characteristic, status: 0x%08lX"
+msgstr "Gagal untuk menambahkan karakteristik, status: 0x%08lX"
+
+#: ports/nrf/common-hal/bleio/UUID.c:97
+#, c-format
+msgid "Failed to add Vendor Specific UUID, status: 0x%08lX"
+msgstr "Gagal untuk menambahkan Vendor Spesific UUID, status: 0x%08lX"
+
+#: ports/nrf/common-hal/bleio/UUID.c:102
+msgid "Invalid UUID string length"
+msgstr "Panjang string UUID tidak valid"
+
+#: ports/nrf/common-hal/bleio/UUID.c:109
+#: shared-bindings/bleio/Characteristic.c:125
+#: shared-bindings/bleio/Service.c:105
+msgid "Invalid UUID parameter"
+msgstr "Parameter UUID tidak valid"
+
+#: ports/nrf/common-hal/busio/I2C.c:98
+msgid "All I2C peripherals are in use"
+msgstr "Semua perangkat I2C sedang digunakan"
+
+#: ports/nrf/common-hal/busio/SPI.c:133
+msgid "All SPI peripherals are in use"
+msgstr "Semua perangkat SPI sedang digunakan"
+
+#: ports/nrf/common-hal/busio/UART.c:49
+#, c-format
+msgid "error = 0x%08lX"
+msgstr "error = 0x%08lX"
+
+#: ports/nrf/common-hal/busio/UART.c:122
+msgid "Invalid buffer size"
+msgstr "Ukuran buffer tidak valid"
+
+#: ports/nrf/common-hal/busio/UART.c:126
+msgid "Odd parity is not supported"
+msgstr "Parity ganjil tidak didukung"
+
+#: ports/nrf/common-hal/busio/UART.c:358 ports/nrf/common-hal/busio/UART.c:362
+#: ports/nrf/common-hal/busio/UART.c:367 ports/nrf/common-hal/busio/UART.c:372
+#: ports/nrf/common-hal/busio/UART.c:378 ports/nrf/common-hal/busio/UART.c:383
+#: ports/nrf/common-hal/busio/UART.c:388 ports/nrf/common-hal/busio/UART.c:392
+#: ports/nrf/common-hal/busio/UART.c:400
+msgid "busio.UART not available"
+msgstr "busio.UART tidak tersedia"
+
+#: ports/nrf/common-hal/microcontroller/Processor.c:49
+#, c-format
+msgid "Can not get temperature. status: 0x%02x"
+msgstr "Tidak bisa mendapatkan temperatur. status: 0x%02x"
+
+#: ports/nrf/common-hal/pulseio/PWMOut.c:161
+msgid "All PWM peripherals are in use"
+msgstr "Semua perangkat PWM sedang digunakan"
+
+#: ports/unix/modffi.c:138
+msgid "Unknown type"
+msgstr "Tipe tidak diketahui"
+
+#: ports/unix/modffi.c:207 ports/unix/modffi.c:265
+msgid "Error in ffi_prep_cif"
+msgstr "Errod pada ffi_prep_cif"
+
+#: ports/unix/modffi.c:270
+msgid "ffi_prep_closure_loc"
+msgstr "ffi_prep_closure_loc"
+
+#: ports/unix/modffi.c:413
+msgid "Don't know how to pass object to native function"
+msgstr "Tidak tahu cara meloloskan objek ke fungsi native"
+
+#: ports/unix/modusocket.c:474
+#, c-format
+msgid "[addrinfo error %d]"
+msgstr "[addrinfo error %d]"
+
+#: py/argcheck.c:44
+msgid "function does not take keyword arguments"
+msgstr "fungsi tidak dapat mengambil argumen keyword"
+
+#: py/argcheck.c:54 py/bc.c:85 py/objnamedtuple.c:104
+#, c-format
+msgid "function takes %d positional arguments but %d were given"
+msgstr "fungsi mengambil posisi argumen %d tapi %d yang diberikan"
+
+#: py/argcheck.c:64
+#, c-format
+msgid "function missing %d required positional arguments"
+msgstr "fungsi kehilangan %d argumen posisi yang dibutuhkan"
+
+#: py/argcheck.c:72
+#, c-format
+msgid "function expected at most %d arguments, got %d"
+msgstr "fungsi diharapkan setidaknya %d argumen, hanya mendapatkan %d"
+
+#: py/argcheck.c:97
+msgid "'%q' argument required"
+msgstr "'%q' argumen dibutuhkan"
+
+#: py/argcheck.c:122
+msgid "extra positional arguments given"
+msgstr "argumen posisi ekstra telah diberikan"
+
+#: py/argcheck.c:130
+msgid "extra keyword arguments given"
+msgstr "argumen keyword ekstra telah diberikan"
+
+#: py/argcheck.c:142
+msgid "argument num/types mismatch"
+msgstr "argumen num/types tidak cocok"
+
+#: py/argcheck.c:147
+msgid "keyword argument(s) not yet implemented - use normal args instead"
+msgstr "argumen keyword belum diimplementasi - gunakan args normal"
+
+#: py/bc.c:88 py/objnamedtuple.c:108
+msgid "%q() takes %d positional arguments but %d were given"
+msgstr "%q() mengambil posisi argumen %d tapi %d yang diberikan"
+
+#: py/bc.c:197 py/bc.c:215
+msgid "unexpected keyword argument"
+msgstr "argumen keyword tidak diharapkan"
+
+#: py/bc.c:199
+msgid "keywords must be strings"
+msgstr "keyword harus berupa string"
+
+#: py/bc.c:206 py/objnamedtuple.c:138
+msgid "function got multiple values for argument '%q'"
+msgstr "fungsi mendapatkan nilai ganda untuk argumen '%q'"
+
+#: py/bc.c:218 py/objnamedtuple.c:130
+msgid "unexpected keyword argument '%q'"
+msgstr "keyword argumen '%q' tidak diharapkan"
+
+#: py/bc.c:244
+#, c-format
+msgid "function missing required positional argument #%d"
+msgstr "fungsi kehilangan argumen posisi #%d yang dibutuhkan"
+
+#: py/bc.c:260
+msgid "function missing required keyword argument '%q'"
+msgstr "fungsi kehilangan argumen keyword '%q' yang dibutuhkan"
+
+#: py/bc.c:269
+msgid "function missing keyword-only argument"
+msgstr "fungsi kehilangan argumen keyword-only"
+
+#: py/binary.c:112
+msgid "bad typecode"
+msgstr "typecode buruk"
+
+#: py/builtinevex.c:99
+msgid "bad compile mode"
+msgstr "mode compile buruk"
+
+#: py/builtinhelp.c:137
+msgid "Plus any modules on the filesystem\n"
+msgstr "Tambahkan module apapun pada filesystem\n"
+
+#: py/builtinhelp.c:183
+#, c-format
+msgid ""
+"Welcome to Adafruit CircuitPython %s!\n"
+"\n"
+"Please visit learn.adafruit.com/category/circuitpython for project guides.\n"
+"\n"
+"To list built-in modules please do `help(\"modules\")`.\n"
+msgstr ""
+"Selamat datang ke Adafruit CircuitPython %s!\n"
+"\n"
+"Silahkan kunjungi learn.adafruit.com/category/circuitpython untuk panduan "
+"project.\n"
+"\n"
+"Untuk menampilkan modul built-in silahkan ketik `help(\"modules\")`.\n"
+
+#: py/builtinimport.c:336
+msgid "cannot perform relative import"
+msgstr "tidak dapat melakukan relative import"
+
+#: py/builtinimport.c:420 py/builtinimport.c:532
+msgid "module not found"
+msgstr "modul tidak ditemukan"
+
+#: py/builtinimport.c:423 py/builtinimport.c:535
+msgid "no module named '%q'"
+msgstr "tidak ada modul yang bernama '%q'"
+
+#: py/builtinimport.c:510
+msgid "relative import"
+msgstr "relative import"
+
+#: py/compile.c:397 py/compile.c:542
+msgid "can't assign to expression"
+msgstr "tidak dapat menetapkan ke ekspresi"
+
+#: py/compile.c:416
+msgid "multiple *x in assignment"
+msgstr "perkalian *x dalam assignment"
+
+#: py/compile.c:642
+msgid "non-default argument follows default argument"
+msgstr "argumen non-default mengikuti argumen standar(default)"
+
+#: py/compile.c:771 py/compile.c:789
+msgid "invalid micropython decorator"
+msgstr "micropython decorator tidak valid"
+
+#: py/compile.c:943
+msgid "can't delete expression"
+msgstr "tidak bisa menghapus ekspresi"
+
+#: py/compile.c:955
+msgid "'break' outside loop"
+msgstr "'break' diluar loop"
+
+#: py/compile.c:958
+msgid "'continue' outside loop"
+msgstr "'continue' diluar loop"
+
+#: py/compile.c:969
+msgid "'return' outside function"
+msgstr "'return' diluar fungsi"
+
+#: py/compile.c:1169
+msgid "identifier redefined as global"
+msgstr "identifier didefinisi ulang sebagai global"
+
+#: py/compile.c:1185
+msgid "no binding for nonlocal found"
+msgstr "tidak ada ikatan/bind pada temuan nonlocal"
+
+#: py/compile.c:1188
+msgid "identifier redefined as nonlocal"
+msgstr "identifier didefinisi ulang sebagai nonlocal"
+
+#: py/compile.c:1197
+msgid "can't declare nonlocal in outer code"
+msgstr "tidak dapat mendeklarasikan nonlocal diluar jangkauan kode"
+
+#: py/compile.c:1542
+msgid "default 'except' must be last"
+msgstr "'except' standar harus terakhir"
+
+#: py/compile.c:2095
+msgid "*x must be assignment target"
+msgstr "*x harus menjadi target assignment"
+
+#: py/compile.c:2193
+msgid "super() can't find self"
+msgstr "super() tidak dapat menemukan dirinya sendiri"
+
+#: py/compile.c:2256
+msgid "can't have multiple *x"
+msgstr "tidak bisa memiliki *x ganda"
+
+#: py/compile.c:2263
+msgid "can't have multiple **x"
+msgstr "tidak bisa memiliki **x ganda"
+
+#: py/compile.c:2271
+msgid "LHS of keyword arg must be an id"
+msgstr "LHS dari keyword arg harus menjadi sebuah id"
+
+#: py/compile.c:2287
+msgid "non-keyword arg after */**"
+msgstr "non-keyword arg setelah */**"
+
+#: py/compile.c:2291
+msgid "non-keyword arg after keyword arg"
+msgstr "non-keyword arg setelah keyword arg"
+
+#: py/compile.c:2463 py/compile.c:2473 py/compile.c:2712 py/compile.c:2742
+#: py/parse.c:1176
+msgid "invalid syntax"
+msgstr "syntax tidak valid"
+
+#: py/compile.c:2465
+msgid "expecting key:value for dict"
+msgstr "key:value diharapkan untuk dict"
+
+#: py/compile.c:2475
+msgid "expecting just a value for set"
+msgstr "hanya mengharapkan sebuah nilai (value) untuk set"
+
+#: py/compile.c:2600
+msgid "'yield' outside function"
+msgstr "'yield' diluar fungsi"
+
+#: py/compile.c:2619
+msgid "'await' outside function"
+msgstr "'await' diluar fungsi"
+
+#: py/compile.c:2774
+msgid "name reused for argument"
+msgstr "nama digunakan kembali untuk argumen"
+
+#: py/compile.c:2827
+msgid "parameter annotation must be an identifier"
+msgstr "anotasi parameter haruse sebuah identifier"
+
+#: py/compile.c:2969 py/compile.c:3137
+msgid "return annotation must be an identifier"
+msgstr "anotasi return harus sebuah identifier"
+
+#: py/compile.c:3097
+msgid "inline assembler must be a function"
+msgstr "inline assembler harus sebuah fungsi"
+
+#: py/compile.c:3134
+msgid "unknown type"
+msgstr "tipe tidak diketahui"
+
+#: py/compile.c:3154
+msgid "expecting an assembler instruction"
+msgstr "sebuah instruksi assembler diharapkan"
+
+#: py/compile.c:3184
+msgid "'label' requires 1 argument"
+msgstr "'label' membutuhkan 1 argumen"
+
+#: py/compile.c:3190
+msgid "label redefined"
+msgstr "label didefinis ulang"
+
+#: py/compile.c:3196
+msgid "'align' requires 1 argument"
+msgstr "'align' membutuhkan 1 argumen"
+
+#: py/compile.c:3205
+msgid "'data' requires at least 2 arguments"
+msgstr "'data' membutuhkan setidaknya 2 argumen"
+
+#: py/compile.c:3212
+msgid "'data' requires integer arguments"
+msgstr "'data' membutuhkan argumen integer"
+
+#: py/emitinlinethumb.c:102
+msgid "can only have up to 4 parameters to Thumb assembly"
+msgstr "hanya mampu memiliki hingga 4 parameter untuk Thumb assembly"
+
+#: py/emitinlinethumb.c:107 py/emitinlinethumb.c:112
+msgid "parameters must be registers in sequence r0 to r3"
+msgstr "parameter harus menjadi register dalam urutan r0 sampai r3"
+
+#: py/emitinlinethumb.c:188 py/emitinlinethumb.c:230
+#, c-format
+msgid "'%s' expects at most r%d"
+msgstr "'%s' mengharapkan setidaknya r%d"
+
+#: py/emitinlinethumb.c:197 py/emitinlinextensa.c:162
+#, c-format
+msgid "'%s' expects a register"
+msgstr "'%s' mengharapkan sebuah register"
+
+#: py/emitinlinethumb.c:211
+#, c-format
+msgid "'%s' expects a special register"
+msgstr "'%s' mengharapkan sebuah register spesial"
+
+#: py/emitinlinethumb.c:239
+#, c-format
+msgid "'%s' expects an FPU register"
+msgstr "'%s' mengharapkan sebuah FPU register"
+
+#: py/emitinlinethumb.c:292
+#, c-format
+msgid "'%s' expects {r0, r1, ...}"
+msgstr "'%s' mengharapkan {r0, r1, ...}"
+
+#: py/emitinlinethumb.c:299 py/emitinlinextensa.c:169
+#, c-format
+msgid "'%s' expects an integer"
+msgstr "'%s' mengharapkan integer"
+
+#: py/emitinlinethumb.c:304
+#, c-format
+msgid "'%s' integer 0x%x does not fit in mask 0x%x"
+msgstr "'%s' integer 0x%x tidak cukup didalam mask 0x%x"
+
+#: py/emitinlinethumb.c:328
+#, c-format
+msgid "'%s' expects an address of the form [a, b]"
+msgstr "'%s' mengharapkan sebuah alamat dengan bentuk [a, b]"
+
+#: py/emitinlinethumb.c:334 py/emitinlinextensa.c:182
+#, c-format
+msgid "'%s' expects a label"
+msgstr ""
+
+#: py/emitinlinethumb.c:345 py/emitinlinextensa.c:193
+msgid "label '%q' not defined"
+msgstr ""
+
+#: py/emitinlinethumb.c:806
+#, c-format
+msgid "unsupported Thumb instruction '%s' with %d arguments"
+msgstr ""
+
+#: py/emitinlinethumb.c:810
+msgid "branch not in range"
+msgstr ""
+
+#: py/emitinlinextensa.c:86
+msgid "can only have up to 4 parameters to Xtensa assembly"
+msgstr ""
+
+#: py/emitinlinextensa.c:91 py/emitinlinextensa.c:96
+msgid "parameters must be registers in sequence a2 to a5"
+msgstr ""
+
+#: py/emitinlinextensa.c:174
+#, c-format
+msgid "'%s' integer %d is not within range %d..%d"
+msgstr ""
+
+#: py/emitinlinextensa.c:327
+#, c-format
+msgid "unsupported Xtensa instruction '%s' with %d arguments"
+msgstr ""
+
+#: py/emitnative.c:183
+msgid "unknown type '%q'"
+msgstr ""
+
+#: py/emitnative.c:260
+msgid "Viper functions don't currently support more than 4 arguments"
+msgstr ""
+
+#: py/emitnative.c:742
+msgid "conversion to object"
+msgstr ""
+
+#: py/emitnative.c:921
+msgid "local '%q' used before type known"
+msgstr ""
+
+#: py/emitnative.c:1118 py/emitnative.c:1156
+msgid "can't load from '%q'"
+msgstr ""
+
+#: py/emitnative.c:1128
+msgid "can't load with '%q' index"
+msgstr ""
+
+#: py/emitnative.c:1188
+msgid "local '%q' has type '%q' but source is '%q'"
+msgstr ""
+
+#: py/emitnative.c:1289 py/emitnative.c:1379
+msgid "can't store '%q'"
+msgstr ""
+
+#: py/emitnative.c:1358 py/emitnative.c:1419
+msgid "can't store to '%q'"
+msgstr ""
+
+#: py/emitnative.c:1369
+msgid "can't store with '%q' index"
+msgstr ""
+
+#: py/emitnative.c:1540
+msgid "can't implicitly convert '%q' to 'bool'"
+msgstr ""
+
+#: py/emitnative.c:1774
+msgid "unary op %q not implemented"
+msgstr ""
+
+#: py/emitnative.c:1930
+msgid "binary op %q not implemented"
+msgstr ""
+
+#: py/emitnative.c:1951
+msgid "can't do binary op between '%q' and '%q'"
+msgstr ""
+
+#: py/emitnative.c:2126
+msgid "casting"
+msgstr ""
+
+#: py/emitnative.c:2173
+msgid "return expected '%q' but got '%q'"
+msgstr ""
+
+#: py/emitnative.c:2191
+msgid "must raise an object"
+msgstr ""
+
+#: py/emitnative.c:2201
+msgid "native yield"
+msgstr ""
+
+#: py/lexer.c:345
+msgid "unicode name escapes"
+msgstr ""
+
+#: py/modbuiltins.c:162
+msgid "chr() arg not in range(0x110000)"
+msgstr ""
+
+#: py/modbuiltins.c:171
+msgid "chr() arg not in range(256)"
+msgstr ""
+
+#: py/modbuiltins.c:285
+msgid "arg is an empty sequence"
+msgstr ""
+
+#: py/modbuiltins.c:350
+msgid "ord expects a character"
+msgstr ""
+
+#: py/modbuiltins.c:353
+#, c-format
+msgid "ord() expected a character, but string of length %d found"
+msgstr ""
+
+#: py/modbuiltins.c:363
+msgid "3-arg pow() not supported"
+msgstr ""
+
+#: py/modbuiltins.c:517
+msgid "must use keyword argument for key function"
+msgstr ""
+
+#: py/modmath.c:41 shared-bindings/math/__init__.c:53
+msgid "math domain error"
+msgstr ""
+
+#: py/modmath.c:196 py/objfloat.c:270 py/objint_longlong.c:222
+#: py/objint_mpz.c:230 py/runtime.c:619 shared-bindings/math/__init__.c:346
+msgid "division by zero"
+msgstr ""
+
+#: py/modmicropython.c:155
+msgid "schedule stack full"
+msgstr ""
+
+#: py/modstruct.c:145 py/modstruct.c:153 py/modstruct.c:234 py/modstruct.c:244
+#: shared-bindings/struct/__init__.c:103 shared-bindings/struct/__init__.c:145
+#: shared-module/struct/__init__.c:91 shared-module/struct/__init__.c:175
+msgid "buffer too small"
+msgstr ""
+
+#: py/modthread.c:240
+msgid "expecting a dict for keyword args"
+msgstr ""
+
+#: py/moduerrno.c:147 py/moduerrno.c:150
+msgid "Permission denied"
+msgstr ""
+
+#: py/moduerrno.c:148
+msgid "No such file/directory"
+msgstr ""
+
+#: py/moduerrno.c:149
+msgid "Input/output error"
+msgstr ""
+
+#: py/moduerrno.c:151
+msgid "File exists"
+msgstr ""
+
+#: py/moduerrno.c:152
+msgid "Unsupported operation"
+msgstr ""
+
+#: py/moduerrno.c:153
+msgid "Invalid argument"
+msgstr ""
+
+#: py/obj.c:92
+msgid "Traceback (most recent call last):\n"
+msgstr ""
+
+#: py/obj.c:96
+msgid "  File \"%q\", line %d"
+msgstr ""
+
+#: py/obj.c:98
+msgid "  File \"%q\""
+msgstr ""
+
+#: py/obj.c:102
+msgid ", in %q\n"
+msgstr ""
+
+#: py/obj.c:259
+msgid "can't convert to int"
+msgstr ""
+
+#: py/obj.c:262
+#, c-format
+msgid "can't convert %s to int"
+msgstr ""
+
+#: py/obj.c:322
+msgid "can't convert to float"
+msgstr ""
+
+#: py/obj.c:325
+#, c-format
+msgid "can't convert %s to float"
+msgstr ""
+
+#: py/obj.c:355
+msgid "can't convert to complex"
+msgstr ""
+
+#: py/obj.c:358
+#, c-format
+msgid "can't convert %s to complex"
+msgstr ""
+
+#: py/obj.c:373
+msgid "expected tuple/list"
+msgstr ""
+
+#: py/obj.c:376
+#, c-format
+msgid "object '%s' is not a tuple or list"
+msgstr ""
+
+#: py/obj.c:387
+msgid "tuple/list has wrong length"
+msgstr ""
+
+#: py/obj.c:389
+#, c-format
+msgid "requested length %d but object has length %d"
+msgstr ""
+
+#: py/obj.c:402
+msgid "indices must be integers"
+msgstr ""
+
+#: py/obj.c:405
+msgid "%q indices must be integers, not %s"
+msgstr ""
+
+#: py/obj.c:425
+msgid "%q index out of range"
+msgstr ""
+
+#: py/obj.c:457
+msgid "object has no len"
+msgstr ""
+
+#: py/obj.c:460
+#, c-format
+msgid "object of type '%s' has no len()"
+msgstr ""
+
+#: py/obj.c:500
+msgid "object does not support item deletion"
+msgstr ""
+
+#: py/obj.c:503
+#, c-format
+msgid "'%s' object does not support item deletion"
+msgstr ""
+
+#: py/obj.c:507
+msgid "object is not subscriptable"
+msgstr ""
+
+#: py/obj.c:510
+#, c-format
+msgid "'%s' object is not subscriptable"
+msgstr ""
+
+#: py/obj.c:514
+msgid "object does not support item assignment"
+msgstr ""
+
+#: py/obj.c:517
+#, c-format
+msgid "'%s' object does not support item assignment"
+msgstr ""
+
+#: py/obj.c:548
+msgid "object with buffer protocol required"
+msgstr ""
+
+#: py/objarray.c:413 py/objstr.c:427 py/objstrunicode.c:191 py/objtuple.c:187
+#: shared-bindings/nvm/ByteArray.c:85
+msgid "only slices with step=1 (aka None) are supported"
+msgstr ""
+
+#: py/objarray.c:426
+msgid "lhs and rhs should be compatible"
+msgstr ""
+
+#: py/objarray.c:444 shared-bindings/nvm/ByteArray.c:107
+msgid "array/bytes required on right side"
+msgstr ""
+
+#: py/objcomplex.c:203
+msgid "can't do truncated division of a complex number"
+msgstr ""
+
+#: py/objcomplex.c:209
+msgid "complex division by zero"
+msgstr ""
+
+#: py/objcomplex.c:237
+msgid "0.0 to a complex power"
+msgstr ""
+
+#: py/objdeque.c:107
+msgid "full"
+msgstr ""
+
+#: py/objdeque.c:127
+msgid "empty"
+msgstr ""
+
+#: py/objdict.c:314
+msgid "popitem(): dictionary is empty"
+msgstr ""
+
+#: py/objdict.c:357
+msgid "dict update sequence has wrong length"
+msgstr ""
+
+#: py/objfloat.c:308 py/parsenum.c:331
+msgid "complex values not supported"
+msgstr ""
+
+#: py/objgenerator.c:108
+msgid "can't send non-None value to a just-started generator"
+msgstr ""
+
+#: py/objgenerator.c:126
+msgid "generator already executing"
+msgstr ""
+
+#: py/objgenerator.c:229
+msgid "generator ignored GeneratorExit"
+msgstr ""
+
+#: py/objgenerator.c:251
+msgid "can't pend throw to just-started generator"
+msgstr ""
+
+#: py/objint.c:144
+msgid "can't convert inf to int"
+msgstr ""
+
+#: py/objint.c:146
+msgid "can't convert NaN to int"
+msgstr ""
+
+#: py/objint.c:163
+msgid "float too big"
+msgstr ""
+
+#: py/objint.c:328
+msgid "long int not supported in this build"
+msgstr ""
+
+#: py/objint.c:334 py/objint.c:340 py/objint.c:350 py/objint.c:358
+msgid "small int overflow"
+msgstr ""
+
+#: py/objint_longlong.c:189 py/objint_mpz.c:283 py/runtime.c:486
+msgid "negative power with no float support"
+msgstr ""
+
+#: py/objint_longlong.c:251
+msgid "ulonglong too large"
+msgstr ""
+
+#: py/objint_mpz.c:267 py/runtime.c:396 py/runtime.c:411
+msgid "negative shift count"
+msgstr ""
+
+#: py/objint_mpz.c:336
+msgid "pow() with 3 arguments requires integers"
+msgstr ""
+
+#: py/objint_mpz.c:347
+msgid "pow() 3rd argument cannot be 0"
+msgstr ""
+
+#: py/objint_mpz.c:415
+msgid "overflow converting long int to machine word"
+msgstr ""
+
+#: py/objlist.c:273
+msgid "pop from empty list"
+msgstr ""
+
+#: py/objnamedtuple.c:92
+msgid "can't set attribute"
+msgstr ""
+
+#: py/objobject.c:55
+msgid "__new__ arg must be a user-type"
+msgstr ""
+
+#: py/objrange.c:110
+msgid "zero step"
+msgstr ""
+
+#: py/objset.c:371
+msgid "pop from an empty set"
+msgstr ""
+
+#: py/objslice.c:66
+msgid "Length must be an int"
+msgstr ""
+
+#: py/objslice.c:71
+msgid "Length must be non-negative"
+msgstr ""
+
+#: py/objslice.c:86 py/sequence.c:57
+msgid "slice step cannot be zero"
+msgstr ""
+
+#: py/objslice.c:159
+msgid "Cannot subclass slice"
+msgstr ""
+
+#: py/objstr.c:261
+msgid "bytes value out of range"
+msgstr ""
+
+#: py/objstr.c:270
+msgid "wrong number of arguments"
+msgstr ""
+
+#: py/objstr.c:467
+msgid "join expects a list of str/bytes objects consistent with self object"
+msgstr ""
+
+#: py/objstr.c:542 py/objstr.c:647 py/objstr.c:1744
+msgid "empty separator"
+msgstr ""
+
+#: py/objstr.c:641
+msgid "rsplit(None,n)"
+msgstr ""
+
+#: py/objstr.c:713
+msgid "substring not found"
+msgstr ""
+
+#: py/objstr.c:770
+msgid "start/end indices"
+msgstr ""
+
+#: py/objstr.c:931
+msgid "bad format string"
+msgstr ""
+
+#: py/objstr.c:953
+msgid "single '}' encountered in format string"
+msgstr ""
+
+#: py/objstr.c:992
+msgid "bad conversion specifier"
+msgstr ""
+
+#: py/objstr.c:996
+msgid "end of format while looking for conversion specifier"
+msgstr ""
+
+#: py/objstr.c:998
+#, c-format
+msgid "unknown conversion specifier %c"
+msgstr ""
+
+#: py/objstr.c:1029
+msgid "unmatched '{' in format"
+msgstr ""
+
+#: py/objstr.c:1036
+msgid "expected ':' after format specifier"
+msgstr ""
+
+#: py/objstr.c:1050
+msgid ""
+"can't switch from automatic field numbering to manual field specification"
+msgstr ""
+
+#: py/objstr.c:1055 py/objstr.c:1083
+msgid "tuple index out of range"
+msgstr ""
+
+#: py/objstr.c:1071
+msgid "attributes not supported yet"
+msgstr ""
+
+#: py/objstr.c:1079
+msgid ""
+"can't switch from manual field specification to automatic field numbering"
+msgstr ""
+
+#: py/objstr.c:1171
+msgid "invalid format specifier"
+msgstr ""
+
+#: py/objstr.c:1192
+msgid "sign not allowed in string format specifier"
+msgstr ""
+
+#: py/objstr.c:1200
+msgid "sign not allowed with integer format specifier 'c'"
+msgstr ""
+
+#: py/objstr.c:1259
+#, c-format
+msgid "unknown format code '%c' for object of type '%s'"
+msgstr ""
+
+#: py/objstr.c:1331
+#, c-format
+msgid "unknown format code '%c' for object of type 'float'"
+msgstr ""
+
+#: py/objstr.c:1343
+msgid "'=' alignment not allowed in string format specifier"
+msgstr ""
+
+#: py/objstr.c:1367
+#, c-format
+msgid "unknown format code '%c' for object of type 'str'"
+msgstr ""
+
+#: py/objstr.c:1415
+msgid "format requires a dict"
+msgstr ""
+
+#: py/objstr.c:1424
+msgid "incomplete format key"
+msgstr ""
+
+#: py/objstr.c:1482
+msgid "incomplete format"
+msgstr ""
+
+#: py/objstr.c:1490
+msgid "not enough arguments for format string"
+msgstr ""
+
+#: py/objstr.c:1500
+#, c-format
+msgid "%%c requires int or char"
+msgstr ""
+
+#: py/objstr.c:1507
+msgid "integer required"
+msgstr ""
+
+#: py/objstr.c:1570
+#, c-format
+msgid "unsupported format character '%c' (0x%x) at index %d"
+msgstr ""
+
+#: py/objstr.c:1577
+msgid "not all arguments converted during string formatting"
+msgstr ""
+
+#: py/objstr.c:2102
+msgid "can't convert to str implicitly"
+msgstr ""
+
+#: py/objstr.c:2106
+msgid "can't convert '%q' object to %q implicitly"
+msgstr ""
+
+#: py/objstrunicode.c:134
+#, c-format
+msgid "string indices must be integers, not %s"
+msgstr ""
+
+#: py/objstrunicode.c:145 py/objstrunicode.c:164
+msgid "string index out of range"
+msgstr ""
+
+#: py/objtype.c:358
+msgid "__init__() should return None"
+msgstr ""
+
+#: py/objtype.c:360
+#, c-format
+msgid "__init__() should return None, not '%s'"
+msgstr ""
+
+#: py/objtype.c:623 py/objtype.c:1275 py/runtime.c:1065
+msgid "unreadable attribute"
+msgstr ""
+
+#: py/objtype.c:868 py/runtime.c:653
+msgid "object not callable"
+msgstr ""
+
+#: py/objtype.c:870 py/runtime.c:655
+#, c-format
+msgid "'%s' object is not callable"
+msgstr ""
+
+#: py/objtype.c:978
+msgid "type takes 1 or 3 arguments"
+msgstr ""
+
+#: py/objtype.c:989
+msgid "cannot create instance"
+msgstr ""
+
+#: py/objtype.c:991
+msgid "cannot create '%q' instances"
+msgstr ""
+
+#: py/objtype.c:1047
+msgid "can't add special method to already-subclassed class"
+msgstr ""
+
+#: py/objtype.c:1091 py/objtype.c:1097
+msgid "type is not an acceptable base type"
+msgstr ""
+
+#: py/objtype.c:1100
+msgid "type '%q' is not an acceptable base type"
+msgstr ""
+
+#: py/objtype.c:1137
+msgid "multiple inheritance not supported"
+msgstr ""
+
+#: py/objtype.c:1164
+msgid "multiple bases have instance lay-out conflict"
+msgstr ""
+
+#: py/objtype.c:1205
+msgid "first argument to super() must be type"
+msgstr ""
+
+#: py/objtype.c:1370
+msgid "issubclass() arg 2 must be a class or a tuple of classes"
+msgstr ""
+
+#: py/objtype.c:1384
+msgid "issubclass() arg 1 must be a class"
+msgstr ""
+
+#: py/parse.c:726
+msgid "constant must be an integer"
+msgstr ""
+
+#: py/parse.c:868
+msgid "Unable to init parser"
+msgstr ""
+
+#: py/parse.c:1170
+msgid "unexpected indent"
+msgstr ""
+
+#: py/parse.c:1173
+msgid "unindent does not match any outer indentation level"
+msgstr ""
+
+#: py/parsenum.c:60
+msgid "int() arg 2 must be >= 2 and <= 36"
+msgstr ""
+
+#: py/parsenum.c:151
+msgid "invalid syntax for integer"
+msgstr ""
+
+#: py/parsenum.c:155
+#, c-format
+msgid "invalid syntax for integer with base %d"
+msgstr ""
+
+#: py/parsenum.c:339
+msgid "invalid syntax for number"
+msgstr ""
+
+#: py/parsenum.c:342
+msgid "decimal numbers not supported"
+msgstr ""
+
+#: py/persistentcode.c:223
+msgid ""
+"Incompatible .mpy file. Please update all .mpy files. See http://adafru.it/"
+"mpy-update for more info."
+msgstr ""
+
+#: py/persistentcode.c:326
+msgid "can only save bytecode"
+msgstr ""
+
+#: py/runtime.c:206
+msgid "name not defined"
+msgstr ""
+
+#: py/runtime.c:209
+msgid "name '%q' is not defined"
+msgstr ""
+
+#: py/runtime.c:304 py/runtime.c:611
+msgid "unsupported type for operator"
+msgstr ""
+
+#: py/runtime.c:307
+msgid "unsupported type for %q: '%s'"
+msgstr ""
+
+#: py/runtime.c:614
+msgid "unsupported types for %q: '%s', '%s'"
+msgstr ""
+
+#: py/runtime.c:881 py/runtime.c:888 py/runtime.c:945
+msgid "wrong number of values to unpack"
+msgstr ""
+
+#: py/runtime.c:883 py/runtime.c:947
+#, c-format
+msgid "need more than %d values to unpack"
+msgstr ""
+
+#: py/runtime.c:890
+#, c-format
+msgid "too many values to unpack (expected %d)"
+msgstr ""
+
+#: py/runtime.c:984
+msgid "argument has wrong type"
+msgstr ""
+
+#: py/runtime.c:986
+msgid "argument should be a '%q' not a '%q'"
+msgstr ""
+
+#: py/runtime.c:1123 py/runtime.c:1197
+msgid "no such attribute"
+msgstr ""
+
+#: py/runtime.c:1128
+msgid "type object '%q' has no attribute '%q'"
+msgstr ""
+
+#: py/runtime.c:1132 py/runtime.c:1200
+msgid "'%s' object has no attribute '%q'"
+msgstr ""
+
+#: py/runtime.c:1238
+msgid "object not iterable"
+msgstr ""
+
+#: py/runtime.c:1241
+#, c-format
+msgid "'%s' object is not iterable"
+msgstr ""
+
+#: py/runtime.c:1260 py/runtime.c:1296
+msgid "object not an iterator"
+msgstr ""
+
+#: py/runtime.c:1262 py/runtime.c:1298
+#, c-format
+msgid "'%s' object is not an iterator"
+msgstr ""
+
+#: py/runtime.c:1401
+msgid "exceptions must derive from BaseException"
+msgstr ""
+
+#: py/runtime.c:1430
+msgid "cannot import name %q"
+msgstr ""
+
+#: py/runtime.c:1535
+msgid "memory allocation failed, heap is locked"
+msgstr ""
+
+#: py/runtime.c:1539
+#, c-format
+msgid "memory allocation failed, allocating %u bytes"
+msgstr ""
+
+#: py/runtime.c:1609
+msgid "maximum recursion depth exceeded"
+msgstr ""
+
+#: py/sequence.c:264
+msgid "object not in sequence"
+msgstr ""
+
+#: py/stream.c:96
+msgid "stream operation not supported"
+msgstr ""
+
+#: py/stream.c:254
+msgid "string not supported; use bytes or bytearray"
+msgstr ""
+
+#: py/stream.c:289
+msgid "length argument not allowed for this type"
+msgstr ""
+
+#: py/vm.c:255
+msgid "local variable referenced before assignment"
+msgstr ""
+
+#: py/vm.c:1142
+msgid "no active exception to reraise"
+msgstr ""
+
+#: py/vm.c:1284
+msgid "byte code not implemented"
+msgstr ""
+
+#: shared-bindings/_stage/Layer.c:71
+msgid "graphic must be 2048 bytes long"
+msgstr ""
+
+#: shared-bindings/_stage/Layer.c:77 shared-bindings/_stage/Text.c:75
+msgid "palette must be 32 bytes long"
+msgstr ""
+
+#: shared-bindings/_stage/Layer.c:84
+msgid "map buffer too small"
+msgstr ""
+
+#: shared-bindings/_stage/Text.c:69
+msgid "font must be 2048 bytes long"
+msgstr ""
+
+#: shared-bindings/_stage/Text.c:81
+msgid "chars buffer too small"
+msgstr ""
+
+#: shared-bindings/analogio/AnalogOut.c:118
+msgid "AnalogOut is only 16 bits. Value must be less than 65536."
+msgstr ""
+
+#: shared-bindings/audiobusio/I2SOut.c:225
+#: shared-bindings/audioio/AudioOut.c:226
+msgid "Not playing"
+msgstr ""
+
+#: shared-bindings/audiobusio/PDMIn.c:124
+msgid "Bit depth must be multiple of 8."
+msgstr ""
+
+#: shared-bindings/audiobusio/PDMIn.c:128
+msgid "Oversample must be multiple of 8."
+msgstr ""
+
+#: shared-bindings/audiobusio/PDMIn.c:136
+msgid "Microphone startup delay must be in range 0.0 to 1.0"
+msgstr ""
+
+#: shared-bindings/audiobusio/PDMIn.c:193
+msgid "destination_length must be an int >= 0"
+msgstr ""
+
+#: shared-bindings/audiobusio/PDMIn.c:199
+msgid "Cannot record to a file"
+msgstr ""
+
+#: shared-bindings/audiobusio/PDMIn.c:202
+msgid "Destination capacity is smaller than destination_length."
+msgstr ""
+
+#: shared-bindings/audiobusio/PDMIn.c:206
+msgid "destination buffer must be an array of type 'H' for bit_depth = 16"
+msgstr ""
+
+#: shared-bindings/audiobusio/PDMIn.c:208
+msgid ""
+"destination buffer must be a bytearray or array of type 'B' for bit_depth = 8"
+msgstr ""
+
+#: shared-bindings/audioio/Mixer.c:94
+msgid "Invalid voice count"
+msgstr ""
+
+#: shared-bindings/audioio/Mixer.c:99
+msgid "Invalid channel count"
+msgstr ""
+
+#: shared-bindings/audioio/Mixer.c:103
+msgid "Sample rate must be positive"
+msgstr ""
+
+#: shared-bindings/audioio/Mixer.c:107
+msgid "bits_per_sample must be 8 or 16"
+msgstr ""
+
+#: shared-bindings/audioio/RawSample.c:98
+msgid ""
+"sample_source buffer must be a bytearray or array of type 'h', 'H', 'b' or "
+"'B'"
+msgstr ""
+
+#: shared-bindings/audioio/RawSample.c:104
+msgid "buffer must be a bytes-like object"
+msgstr ""
+
+#: shared-bindings/audioio/WaveFile.c:78
+#: shared-bindings/displayio/OnDiskBitmap.c:85
+msgid "file must be a file opened in byte mode"
+msgstr ""
+
+#: shared-bindings/bitbangio/I2C.c:111 shared-bindings/bitbangio/SPI.c:121
+#: shared-bindings/busio/SPI.c:133
+msgid "Function requires lock"
+msgstr ""
+
+#: shared-bindings/bitbangio/I2C.c:195 shared-bindings/busio/I2C.c:210
+msgid "Buffer must be at least length 1"
+msgstr ""
+
+#: shared-bindings/bitbangio/SPI.c:151 shared-bindings/busio/SPI.c:175
+msgid "Invalid polarity"
+msgstr ""
+
+#: shared-bindings/bitbangio/SPI.c:155 shared-bindings/busio/SPI.c:179
+msgid "Invalid phase"
+msgstr ""
+
+#: shared-bindings/bitbangio/SPI.c:159 shared-bindings/busio/SPI.c:183
+msgid "Invalid number of bits"
+msgstr ""
+
+#: shared-bindings/bitbangio/SPI.c:284 shared-bindings/busio/SPI.c:348
+msgid "buffer slices must be of equal length"
+msgstr ""
+
+#: shared-bindings/bleio/Address.c:101
+msgid "Wrong address length"
+msgstr ""
+
+#: shared-bindings/bleio/Address.c:107
+msgid "Wrong number of bytes provided"
+msgstr ""
+
+#: shared-bindings/bleio/Device.c:210
+msgid "Can't add services in Central mode"
+msgstr ""
+
+#: shared-bindings/bleio/Device.c:226
+msgid "Can't connect in Peripheral mode"
+msgstr ""
+
+#: shared-bindings/bleio/Device.c:256
+msgid "Can't change the name in Central mode"
+msgstr ""
+
+#: shared-bindings/bleio/Device.c:277 shared-bindings/bleio/Device.c:313
+msgid "Can't advertise in Central mode"
+msgstr ""
+
+#: shared-bindings/busio/I2C.c:120
+msgid "Function requires lock."
+msgstr ""
+
+#: shared-bindings/busio/UART.c:106
+msgid "bits must be 7, 8 or 9"
+msgstr ""
+
+#: shared-bindings/busio/UART.c:118
+msgid "stop must be 1 or 2"
+msgstr ""
+
+#: shared-bindings/busio/UART.c:123
+msgid "timeout >100 (units are now seconds, not msecs)"
+msgstr ""
+
+#: shared-bindings/digitalio/DigitalInOut.c:211
+msgid "Invalid direction."
+msgstr ""
+
+#: shared-bindings/digitalio/DigitalInOut.c:240
+msgid "Cannot set value when direction is input."
+msgstr ""
+
+#: shared-bindings/digitalio/DigitalInOut.c:266
+#: shared-bindings/digitalio/DigitalInOut.c:281
+msgid "Drive mode not used when direction is input."
+msgstr ""
+
+#: shared-bindings/digitalio/DigitalInOut.c:314
+#: shared-bindings/digitalio/DigitalInOut.c:331
+msgid "Pull not used when direction is output."
+msgstr ""
+
+#: shared-bindings/digitalio/DigitalInOut.c:340
+msgid "Unsupported pull value."
+msgstr ""
+
+#: shared-bindings/displayio/Bitmap.c:84
+msgid "y should be an int"
+msgstr ""
+
+#: shared-bindings/displayio/Bitmap.c:89
+msgid "row buffer must be a bytearray or array of type 'b' or 'B'"
+msgstr ""
+
+#: shared-bindings/displayio/Bitmap.c:94
+msgid "row data must be a buffer"
+msgstr ""
+
+#: shared-bindings/displayio/ColorConverter.c:72
+msgid "color should be an int"
+msgstr ""
+
+#: shared-bindings/displayio/FourWire.c:55
+#: shared-bindings/displayio/FourWire.c:64
+msgid "displayio is a work in progress"
+msgstr ""
+
+#: shared-bindings/displayio/Group.c:65
+msgid "Group must have size at least 1"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c:96
+msgid "color buffer must be a bytearray or array of type 'b' or 'B'"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c:102
+msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c:106
+msgid "color must be between 0x000000 and 0xffffff"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c:110
+msgid "color buffer must be a buffer or int"
+msgstr ""
+
+#: shared-bindings/displayio/Palette.c:123
+#: shared-bindings/displayio/Palette.c:137
+msgid "palette_index should be an int"
+msgstr ""
+
+#: shared-bindings/displayio/Sprite.c:48
+msgid "position must be 2-tuple"
+msgstr ""
+
+#: shared-bindings/displayio/Sprite.c:97
+msgid "unsupported bitmap type"
+msgstr ""
+
+#: shared-bindings/displayio/Sprite.c:162
+msgid "pixel_shader must be displayio.Palette or displayio.ColorConverter"
+msgstr ""
+
+#: shared-bindings/gamepad/GamePad.c:100
+msgid "too many arguments"
+msgstr ""
+
+#: shared-bindings/gamepad/GamePad.c:104
+msgid "expected a DigitalInOut"
+msgstr ""
+
+#: shared-bindings/i2cslave/I2CSlave.c:98
+msgid "can't convert address to int"
+msgstr ""
+
+#: shared-bindings/i2cslave/I2CSlave.c:101
+msgid "address out of bounds"
+msgstr ""
+
+#: shared-bindings/i2cslave/I2CSlave.c:107
+msgid "addresses is empty"
+msgstr ""
+
+#: shared-bindings/microcontroller/Pin.c:89
+#: shared-bindings/neopixel_write/__init__.c:67
+#: shared-bindings/pulseio/PulseOut.c:76
+msgid "Expected a %q"
+msgstr ""
+
+#: shared-bindings/microcontroller/Pin.c:100
+msgid "%q in use"
+msgstr ""
+
+#: shared-bindings/microcontroller/__init__.c:126
+msgid "Invalid run mode."
+msgstr ""
+
+#: shared-bindings/multiterminal/__init__.c:68
+msgid "Stream missing readinto() or write() method."
+msgstr ""
+
+#: shared-bindings/nvm/ByteArray.c:99
+msgid "Slice and value different lengths."
+msgstr ""
+
+#: shared-bindings/nvm/ByteArray.c:104
+msgid "Array values should be single bytes."
+msgstr ""
+
+#: shared-bindings/nvm/ByteArray.c:111 shared-bindings/nvm/ByteArray.c:141
+msgid "Unable to write to nvm."
+msgstr ""
+
+#: shared-bindings/nvm/ByteArray.c:137
+msgid "Bytes must be between 0 and 255."
+msgstr ""
+
+#: shared-bindings/os/__init__.c:200
+msgid "No hardware random available"
+msgstr ""
+
+#: shared-bindings/pulseio/PWMOut.c:164
+msgid ""
+"PWM duty_cycle must be between 0 and 65535 inclusive (16 bit resolution)"
+msgstr ""
+
+#: shared-bindings/pulseio/PWMOut.c:195
+msgid ""
+"PWM frequency not writable when variable_frequency is False on construction."
+msgstr ""
+
+#: shared-bindings/pulseio/PulseIn.c:275
+msgid "Cannot delete values"
+msgstr ""
+
+#: shared-bindings/pulseio/PulseIn.c:281
+msgid "Slices not supported"
+msgstr ""
+
+#: shared-bindings/pulseio/PulseIn.c:287
+msgid "index must be int"
+msgstr ""
+
+#: shared-bindings/pulseio/PulseIn.c:293
+msgid "Read-only"
+msgstr ""
+
+#: shared-bindings/pulseio/PulseOut.c:135
+msgid "Array must contain halfwords (type 'H')"
+msgstr ""
+
+#: shared-bindings/random/__init__.c:92 shared-bindings/random/__init__.c:100
+msgid "stop not reachable from start"
+msgstr ""
+
+#: shared-bindings/random/__init__.c:111
+msgid "step must be non-zero"
+msgstr ""
+
+#: shared-bindings/random/__init__.c:114
+msgid "invalid step"
+msgstr ""
+
+#: shared-bindings/random/__init__.c:146
+msgid "empty sequence"
+msgstr ""
+
+#: shared-bindings/rtc/RTC.c:40 shared-bindings/rtc/RTC.c:44
+#: shared-bindings/time/__init__.c:190
+msgid "RTC is not supported on this board"
+msgstr ""
+
+#: shared-bindings/rtc/RTC.c:52
+msgid "RTC calibration is not supported on this board"
+msgstr ""
+
+#: shared-bindings/socket/__init__.c:516 shared-module/network/__init__.c:81
+msgid "no available NIC"
+msgstr ""
+
+#: shared-bindings/storage/__init__.c:77
+msgid "filesystem must provide mount method"
+msgstr ""
+
+#: shared-bindings/supervisor/__init__.c:93
+msgid "Brightness must be between 0 and 255"
+msgstr ""
+
+#: shared-bindings/supervisor/__init__.c:119
+msgid "Stack size must be at least 256"
+msgstr ""
+
+#: shared-bindings/time/__init__.c:78
+msgid "sleep length must be non-negative"
+msgstr ""
+
+#: shared-bindings/time/__init__.c:88
+msgid "time.struct_time() takes exactly 1 argument"
+msgstr ""
+
+#: shared-bindings/time/__init__.c:91
+msgid "time.struct_time() takes a 9-sequence"
+msgstr ""
+
+#: shared-bindings/time/__init__.c:169 shared-bindings/time/__init__.c:263
+msgid "Tuple or struct_time argument required"
+msgstr ""
+
+#: shared-bindings/time/__init__.c:174 shared-bindings/time/__init__.c:268
+msgid "function takes exactly 9 arguments"
+msgstr ""
+
+#: shared-bindings/time/__init__.c:239 shared-bindings/time/__init__.c:272
+msgid "timestamp out of range for platform time_t"
+msgstr ""
+
+#: shared-bindings/touchio/TouchIn.c:173
+msgid "threshold must be in the range 0-65536"
+msgstr ""
+
+#: shared-bindings/util.c:38
+msgid ""
+"Object has been deinitialized and can no longer be used. Create a new object."
+msgstr ""
+
+#: shared-module/audioio/Mixer.c:47 shared-module/audioio/WaveFile.c:117
+msgid "Couldn't allocate first buffer"
+msgstr ""
+
+#: shared-module/audioio/Mixer.c:53 shared-module/audioio/WaveFile.c:123
+msgid "Couldn't allocate second buffer"
+msgstr ""
+
+#: shared-module/audioio/Mixer.c:82
+msgid "Voice index too high"
+msgstr ""
+
+#: shared-module/audioio/Mixer.c:85
+msgid "The sample's sample rate does not match the mixer's"
+msgstr ""
+
+#: shared-module/audioio/Mixer.c:88
+msgid "The sample's channel count does not match the mixer's"
+msgstr ""
+
+#: shared-module/audioio/Mixer.c:91
+msgid "The sample's bits_per_sample does not match the mixer's"
+msgstr ""
+
+#: shared-module/audioio/Mixer.c:100
+msgid "The sample's signedness does not match the mixer's"
+msgstr ""
+
+#: shared-module/audioio/WaveFile.c:61
+msgid "Invalid wave file"
+msgstr ""
+
+#: shared-module/audioio/WaveFile.c:69
+msgid "Invalid format chunk size"
+msgstr ""
+
+#: shared-module/audioio/WaveFile.c:83
+msgid "Unsupported format"
+msgstr ""
+
+#: shared-module/audioio/WaveFile.c:99
+msgid "Data chunk must follow fmt chunk"
+msgstr ""
+
+#: shared-module/audioio/WaveFile.c:107
+msgid "Invalid file"
+msgstr ""
+
+#: shared-module/bitbangio/I2C.c:58
+msgid "Clock stretch too long"
+msgstr ""
+
+#: shared-module/bitbangio/SPI.c:44
+msgid "Clock pin init failed."
+msgstr ""
+
+#: shared-module/bitbangio/SPI.c:50
+msgid "MOSI pin init failed."
+msgstr ""
+
+#: shared-module/bitbangio/SPI.c:61
+msgid "MISO pin init failed."
+msgstr ""
+
+#: shared-module/bitbangio/SPI.c:121
+msgid "Cannot write without MOSI pin."
+msgstr ""
+
+#: shared-module/bitbangio/SPI.c:176
+msgid "Cannot read without MISO pin."
+msgstr ""
+
+#: shared-module/bitbangio/SPI.c:240
+msgid "Cannot transfer without MOSI and MISO pins."
+msgstr ""
+
+#: shared-module/displayio/Bitmap.c:49
+msgid "Only bit maps of 8 bit color or less are supported"
+msgstr ""
+
+#: shared-module/displayio/Bitmap.c:69
+msgid "row must be packed and word aligned"
+msgstr ""
+
+#: shared-module/displayio/Group.c:39
+msgid "Group full"
+msgstr ""
+
+#: shared-module/displayio/Group.c:48
+msgid "Group empty"
+msgstr ""
+
+#: shared-module/displayio/OnDiskBitmap.c:49
+msgid "Invalid BMP file"
+msgstr ""
+
+#: shared-module/displayio/OnDiskBitmap.c:59
+#, c-format
+msgid "Only Windows format, uncompressed BMP supported %d"
+msgstr ""
+
+#: shared-module/displayio/OnDiskBitmap.c:64
+#, c-format
+msgid "Only true color (24 bpp or higher) BMP supported %x"
+msgstr ""
+
+#: shared-module/storage/__init__.c:155
+msgid "Cannot remount '/' when USB is active."
+msgstr ""
+
+#: shared-module/struct/__init__.c:39
+msgid "'S' and 'O' are not supported format types"
+msgstr ""
+
+#: shared-module/struct/__init__.c:83
+msgid "too many arguments provided with the given format"
+msgstr ""
+
+#: shared-module/usb_hid/Device.c:45
+#, c-format
+msgid "Buffer incorrect size. Should be %d bytes."
+msgstr ""
+
+#: shared-module/usb_hid/Device.c:53
+msgid "USB Busy"
+msgstr ""
+
+#: shared-module/usb_hid/Device.c:59
+msgid "USB Error"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c:97
+msgid "You requested starting safe mode by "
+msgstr "Anda mengajukan untuk memulai mode aman pada (safe mode) pada "
+
+#: supervisor/shared/safe_mode.c:100
+msgid "To exit, please reset the board without "
+msgstr "Untuk keluar, silahkan reset board tanpa "
+
+#: supervisor/shared/safe_mode.c:107
+#, fuzzy
+msgid ""
+"You are running in safe mode which means something unanticipated happened.\n"
+msgstr ""
+"Anda sedang menjalankan mode aman (safe mode) yang berarti sesuatu yang "
+"sangat buruk telah terjadi.\n"
+
+#: supervisor/shared/safe_mode.c:109
+msgid ""
+"Looks like our core CircuitPython code crashed hard. Whoops!\n"
+"Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
+" with the contents of your CIRCUITPY drive and this message:\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c:111
+msgid "Crash into the HardFault_Handler.\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c:113
+msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c:115
+msgid "MicroPython fatal error.\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c:118
+#, fuzzy
+msgid ""
+"The microcontroller's power dipped. Please make sure your power supply "
+"provides\n"
+"enough power for the whole circuit and press reset (after ejecting "
+"CIRCUITPY).\n"
+msgstr ""
+"Tegangan dari mikrokontroler turun atau mati. Pastikan sumber tegangan "
+"memberikan daya\n"
+
+#: supervisor/shared/safe_mode.c:120
+msgid ""
+"The CircuitPython heap was corrupted because the stack was too small.\n"
+"Please increase stack size limits and press reset (after ejecting "
+"CIRCUITPY).\n"
+"If you didn't change the stack, then file an issue here with the contents of "
+"your CIRCUITPY drive:\n"
+msgstr ""
+
+#: supervisor/shared/safe_mode.c:123
+msgid ""
+"The reset button was pressed while booting CircuitPython. Press again to "
+"exit safe mode.\n"
+msgstr ""
+
+#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
+#~ msgstr ""
+#~ "Sepertinya inti kode CircuitPython kita crash dengan sangat keras. Ups!\n"
+
+#~ msgid ""
+#~ "enough power for the whole circuit and press reset (after ejecting "
+#~ "CIRCUITPY).\n"
+#~ msgstr ""
+#~ "tegangan cukup untuk semua sirkuit dan tekan reset (setelah mencabut "
+#~ "CIRCUITPY).\n"
+
+#~ msgid ""
+#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
+#~ msgstr ""
+#~ "Silahkan taruh masalah disini dengan isi dari CIRCUITPY drive: anda \n"
diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot
index 92e181302..dd7df915f 100644
--- a/locale/circuitpython.pot
+++ b/locale/circuitpython.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-12-26 20:49+0100\n"
+"POT-Creation-Date: 2019-01-10 11:05-0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -329,7 +329,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/SPI.c:171
 #: ports/atmel-samd/common-hal/busio/UART.c:120
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c:45
-#: ports/nrf/common-hal/busio/I2C.c:82
+#: ports/nrf/common-hal/busio/I2C.c:84
 msgid "Invalid pins"
 msgstr ""
 
@@ -346,12 +346,12 @@ msgid "bytes > 8 bits not supported"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c:73
-#: ports/nrf/common-hal/busio/UART.c:106
+#: ports/nrf/common-hal/busio/UART.c:118
 msgid "tx and rx cannot both be None"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c:146
-#: ports/nrf/common-hal/busio/UART.c:140
+#: ports/nrf/common-hal/busio/UART.c:152
 msgid "Failed to allocate RX buffer"
 msgstr ""
 
@@ -360,12 +360,12 @@ msgid "Could not initialize UART"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c:241
-#: ports/nrf/common-hal/busio/UART.c:185
+#: ports/nrf/common-hal/busio/UART.c:197
 msgid "No RX pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c:300
-#: ports/nrf/common-hal/busio/UART.c:220
+#: ports/nrf/common-hal/busio/UART.c:232
 msgid "No TX pin"
 msgstr ""
 
@@ -766,7 +766,7 @@ msgstr ""
 msgid "Invalid UUID parameter"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/I2C.c:96
+#: ports/nrf/common-hal/busio/I2C.c:98
 msgid "All I2C peripherals are in use"
 msgstr ""
 
@@ -779,19 +779,19 @@ msgstr ""
 msgid "error = 0x%08lX"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:110
+#: ports/nrf/common-hal/busio/UART.c:122
 msgid "Invalid buffer size"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:114
+#: ports/nrf/common-hal/busio/UART.c:126
 msgid "Odd parity is not supported"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:346 ports/nrf/common-hal/busio/UART.c:350
-#: ports/nrf/common-hal/busio/UART.c:355 ports/nrf/common-hal/busio/UART.c:360
-#: ports/nrf/common-hal/busio/UART.c:366 ports/nrf/common-hal/busio/UART.c:371
-#: ports/nrf/common-hal/busio/UART.c:376 ports/nrf/common-hal/busio/UART.c:380
-#: ports/nrf/common-hal/busio/UART.c:388
+#: ports/nrf/common-hal/busio/UART.c:358 ports/nrf/common-hal/busio/UART.c:362
+#: ports/nrf/common-hal/busio/UART.c:367 ports/nrf/common-hal/busio/UART.c:372
+#: ports/nrf/common-hal/busio/UART.c:378 ports/nrf/common-hal/busio/UART.c:383
+#: ports/nrf/common-hal/busio/UART.c:388 ports/nrf/common-hal/busio/UART.c:392
+#: ports/nrf/common-hal/busio/UART.c:400
 msgid "busio.UART not available"
 msgstr ""
 
diff --git a/locale/de_DE.po b/locale/de_DE.po
index e9f81e0b1..8792ce834 100644
--- a/locale/de_DE.po
+++ b/locale/de_DE.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-12-26 20:49+0100\n"
+"POT-Creation-Date: 2019-01-10 11:05-0800\n"
 "PO-Revision-Date: 2018-07-27 11:55-0700\n"
 "Last-Translator: Sebastian Plamauer\n"
 "Language-Team: \n"
@@ -333,7 +333,7 @@ msgstr "Nicht genug Pins vorhanden"
 #: ports/atmel-samd/common-hal/busio/SPI.c:171
 #: ports/atmel-samd/common-hal/busio/UART.c:120
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c:45
-#: ports/nrf/common-hal/busio/I2C.c:82
+#: ports/nrf/common-hal/busio/I2C.c:84
 msgid "Invalid pins"
 msgstr "Ungültige Pins"
 
@@ -350,12 +350,12 @@ msgid "bytes > 8 bits not supported"
 msgstr "bytes mit merh als 8 bits werden nicht unterstützt"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:73
-#: ports/nrf/common-hal/busio/UART.c:106
+#: ports/nrf/common-hal/busio/UART.c:118
 msgid "tx and rx cannot both be None"
 msgstr "tx und rx können nicht beide None sein"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:146
-#: ports/nrf/common-hal/busio/UART.c:140
+#: ports/nrf/common-hal/busio/UART.c:152
 msgid "Failed to allocate RX buffer"
 msgstr "Konnte keinen RX Buffer allozieren"
 
@@ -364,12 +364,12 @@ msgid "Could not initialize UART"
 msgstr "Konnte UART nicht initialisieren"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:241
-#: ports/nrf/common-hal/busio/UART.c:185
+#: ports/nrf/common-hal/busio/UART.c:197
 msgid "No RX pin"
 msgstr "Kein RX Pin"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:300
-#: ports/nrf/common-hal/busio/UART.c:220
+#: ports/nrf/common-hal/busio/UART.c:232
 msgid "No TX pin"
 msgstr "Kein TX Pin"
 
@@ -774,7 +774,7 @@ msgstr "Ungültige UUID-Stringlänge"
 msgid "Invalid UUID parameter"
 msgstr "Ungültiger UUID-Parameter"
 
-#: ports/nrf/common-hal/busio/I2C.c:96
+#: ports/nrf/common-hal/busio/I2C.c:98
 #, fuzzy
 msgid "All I2C peripherals are in use"
 msgstr "Alle timer werden benutzt"
@@ -789,21 +789,21 @@ msgstr "Alle timer werden benutzt"
 msgid "error = 0x%08lX"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:110
+#: ports/nrf/common-hal/busio/UART.c:122
 #, fuzzy
 msgid "Invalid buffer size"
 msgstr "ungültiger dupterm index"
 
-#: ports/nrf/common-hal/busio/UART.c:114
+#: ports/nrf/common-hal/busio/UART.c:126
 #, fuzzy
 msgid "Odd parity is not supported"
 msgstr "bytes mit merh als 8 bits werden nicht unterstützt"
 
-#: ports/nrf/common-hal/busio/UART.c:346 ports/nrf/common-hal/busio/UART.c:350
-#: ports/nrf/common-hal/busio/UART.c:355 ports/nrf/common-hal/busio/UART.c:360
-#: ports/nrf/common-hal/busio/UART.c:366 ports/nrf/common-hal/busio/UART.c:371
-#: ports/nrf/common-hal/busio/UART.c:376 ports/nrf/common-hal/busio/UART.c:380
-#: ports/nrf/common-hal/busio/UART.c:388
+#: ports/nrf/common-hal/busio/UART.c:358 ports/nrf/common-hal/busio/UART.c:362
+#: ports/nrf/common-hal/busio/UART.c:367 ports/nrf/common-hal/busio/UART.c:372
+#: ports/nrf/common-hal/busio/UART.c:378 ports/nrf/common-hal/busio/UART.c:383
+#: ports/nrf/common-hal/busio/UART.c:388 ports/nrf/common-hal/busio/UART.c:392
+#: ports/nrf/common-hal/busio/UART.c:400
 msgid "busio.UART not available"
 msgstr ""
 
@@ -2577,15 +2577,26 @@ msgstr ""
 #~ msgid "Can not apply advertisement data. status: 0x%02x"
 #~ msgstr "Kann advertisement data nicht anwenden. Status: 0x%02x"
 
-#~ msgid "Cannot apply GAP parameters."
-#~ msgstr "Kann GAP Parameter nicht anwenden."
+#~ msgid ""
+#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
+#~ msgstr ""
+#~ "Bitte erstelle ein issue hier mit dem Inhalt deines CIRCUITPY-speichers:\n"
 
-#~ msgid "Can not apply device name in the stack."
-#~ msgstr "Der Gerätename kann nicht im Stack verwendet werden."
+#~ msgid "Can not encode UUID, to check length."
+#~ msgstr "Kann UUID nicht kodieren, um die Länge zu überprüfen."
+
+#~ msgid "Can not add Characteristic."
+#~ msgstr "Kann das Merkmal nicht hinzufügen."
+
+#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
+#~ msgstr "CircuitPython ist abgestürzt. Ups!\n"
 
 #~ msgid "Cannot set PPCP parameters."
 #~ msgstr "Kann PPCP Parameter nicht setzen."
 
+#~ msgid "Cannot apply GAP parameters."
+#~ msgstr "Kann GAP Parameter nicht anwenden."
+
 #~ msgid ""
 #~ "enough power for the whole circuit and press reset (after ejecting "
 #~ "CIRCUITPY).\n"
@@ -2593,25 +2604,14 @@ msgstr ""
 #~ "genug Strom für den ganzen Schaltkreis liefert und drücke reset (nach dem "
 #~ "sicheren Auswerfen von CIRCUITPY.)\n"
 
-#~ msgid "Can not query for the device address."
-#~ msgstr "Kann nicht nach der Geräteadresse suchen."
-
-#~ msgid "Can not add Characteristic."
-#~ msgstr "Kann das Merkmal nicht hinzufügen."
-
-#~ msgid "Can not encode UUID, to check length."
-#~ msgstr "Kann UUID nicht kodieren, um die Länge zu überprüfen."
-
 #~ msgid "Can encode UUID into the advertisement packet."
 #~ msgstr "Kann UUID in das advertisement packet kodieren."
 
+#~ msgid "Can not query for the device address."
+#~ msgstr "Kann nicht nach der Geräteadresse suchen."
+
 #~ msgid "Can not add Service."
 #~ msgstr "Kann den Dienst nicht hinzufügen."
 
-#~ msgid ""
-#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
-#~ msgstr ""
-#~ "Bitte erstelle ein issue hier mit dem Inhalt deines CIRCUITPY-speichers:\n"
-
-#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
-#~ msgstr "CircuitPython ist abgestürzt. Ups!\n"
+#~ msgid "Can not apply device name in the stack."
+#~ msgstr "Der Gerätename kann nicht im Stack verwendet werden."
diff --git a/locale/en_US.po b/locale/en_US.po
index 119dde3d6..1b3707917 100644
--- a/locale/en_US.po
+++ b/locale/en_US.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-12-26 20:49+0100\n"
+"POT-Creation-Date: 2019-01-10 11:05-0800\n"
 "PO-Revision-Date: 2018-07-27 11:55-0700\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -329,7 +329,7 @@ msgstr ""
 #: ports/atmel-samd/common-hal/busio/SPI.c:171
 #: ports/atmel-samd/common-hal/busio/UART.c:120
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c:45
-#: ports/nrf/common-hal/busio/I2C.c:82
+#: ports/nrf/common-hal/busio/I2C.c:84
 msgid "Invalid pins"
 msgstr ""
 
@@ -346,12 +346,12 @@ msgid "bytes > 8 bits not supported"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c:73
-#: ports/nrf/common-hal/busio/UART.c:106
+#: ports/nrf/common-hal/busio/UART.c:118
 msgid "tx and rx cannot both be None"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c:146
-#: ports/nrf/common-hal/busio/UART.c:140
+#: ports/nrf/common-hal/busio/UART.c:152
 msgid "Failed to allocate RX buffer"
 msgstr ""
 
@@ -360,12 +360,12 @@ msgid "Could not initialize UART"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c:241
-#: ports/nrf/common-hal/busio/UART.c:185
+#: ports/nrf/common-hal/busio/UART.c:197
 msgid "No RX pin"
 msgstr ""
 
 #: ports/atmel-samd/common-hal/busio/UART.c:300
-#: ports/nrf/common-hal/busio/UART.c:220
+#: ports/nrf/common-hal/busio/UART.c:232
 msgid "No TX pin"
 msgstr ""
 
@@ -766,7 +766,7 @@ msgstr ""
 msgid "Invalid UUID parameter"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/I2C.c:96
+#: ports/nrf/common-hal/busio/I2C.c:98
 msgid "All I2C peripherals are in use"
 msgstr ""
 
@@ -779,19 +779,19 @@ msgstr ""
 msgid "error = 0x%08lX"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:110
+#: ports/nrf/common-hal/busio/UART.c:122
 msgid "Invalid buffer size"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:114
+#: ports/nrf/common-hal/busio/UART.c:126
 msgid "Odd parity is not supported"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:346 ports/nrf/common-hal/busio/UART.c:350
-#: ports/nrf/common-hal/busio/UART.c:355 ports/nrf/common-hal/busio/UART.c:360
-#: ports/nrf/common-hal/busio/UART.c:366 ports/nrf/common-hal/busio/UART.c:371
-#: ports/nrf/common-hal/busio/UART.c:376 ports/nrf/common-hal/busio/UART.c:380
-#: ports/nrf/common-hal/busio/UART.c:388
+#: ports/nrf/common-hal/busio/UART.c:358 ports/nrf/common-hal/busio/UART.c:362
+#: ports/nrf/common-hal/busio/UART.c:367 ports/nrf/common-hal/busio/UART.c:372
+#: ports/nrf/common-hal/busio/UART.c:378 ports/nrf/common-hal/busio/UART.c:383
+#: ports/nrf/common-hal/busio/UART.c:388 ports/nrf/common-hal/busio/UART.c:392
+#: ports/nrf/common-hal/busio/UART.c:400
 msgid "busio.UART not available"
 msgstr ""
 
diff --git a/locale/es.po b/locale/es.po
index 29c69d49c..397056797 100644
--- a/locale/es.po
+++ b/locale/es.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-12-26 20:49+0100\n"
+"POT-Creation-Date: 2019-01-10 11:05-0800\n"
 "PO-Revision-Date: 2018-08-24 22:56-0500\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -335,7 +335,7 @@ msgstr "No hay suficientes pines disponibles"
 #: ports/atmel-samd/common-hal/busio/SPI.c:171
 #: ports/atmel-samd/common-hal/busio/UART.c:120
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c:45
-#: ports/nrf/common-hal/busio/I2C.c:82
+#: ports/nrf/common-hal/busio/I2C.c:84
 msgid "Invalid pins"
 msgstr "pines inválidos"
 
@@ -352,12 +352,12 @@ msgid "bytes > 8 bits not supported"
 msgstr "bytes > 8 bits no soportados"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:73
-#: ports/nrf/common-hal/busio/UART.c:106
+#: ports/nrf/common-hal/busio/UART.c:118
 msgid "tx and rx cannot both be None"
 msgstr "Ambos tx y rx no pueden ser None"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:146
-#: ports/nrf/common-hal/busio/UART.c:140
+#: ports/nrf/common-hal/busio/UART.c:152
 msgid "Failed to allocate RX buffer"
 msgstr "Ha fallado la asignación del buffer RX"
 
@@ -366,12 +366,12 @@ msgid "Could not initialize UART"
 msgstr "No se puede inicializar la UART"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:241
-#: ports/nrf/common-hal/busio/UART.c:185
+#: ports/nrf/common-hal/busio/UART.c:197
 msgid "No RX pin"
 msgstr "Sin pin RX"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:300
-#: ports/nrf/common-hal/busio/UART.c:220
+#: ports/nrf/common-hal/busio/UART.c:232
 msgid "No TX pin"
 msgstr "Sin pin TX"
 
@@ -774,7 +774,7 @@ msgstr "Longitud de string UUID inválida"
 msgid "Invalid UUID parameter"
 msgstr "Parámetro UUID inválido"
 
-#: ports/nrf/common-hal/busio/I2C.c:96
+#: ports/nrf/common-hal/busio/I2C.c:98
 msgid "All I2C peripherals are in use"
 msgstr "Todos los timers están siendo usados"
 
@@ -787,19 +787,19 @@ msgstr "Todos los timers están siendo usados"
 msgid "error = 0x%08lX"
 msgstr "error = 0x%08lx"
 
-#: ports/nrf/common-hal/busio/UART.c:110
+#: ports/nrf/common-hal/busio/UART.c:122
 msgid "Invalid buffer size"
 msgstr "Tamaño de buffer inválido"
 
-#: ports/nrf/common-hal/busio/UART.c:114
+#: ports/nrf/common-hal/busio/UART.c:126
 msgid "Odd parity is not supported"
 msgstr "Paridad impar no soportada"
 
-#: ports/nrf/common-hal/busio/UART.c:346 ports/nrf/common-hal/busio/UART.c:350
-#: ports/nrf/common-hal/busio/UART.c:355 ports/nrf/common-hal/busio/UART.c:360
-#: ports/nrf/common-hal/busio/UART.c:366 ports/nrf/common-hal/busio/UART.c:371
-#: ports/nrf/common-hal/busio/UART.c:376 ports/nrf/common-hal/busio/UART.c:380
-#: ports/nrf/common-hal/busio/UART.c:388
+#: ports/nrf/common-hal/busio/UART.c:358 ports/nrf/common-hal/busio/UART.c:362
+#: ports/nrf/common-hal/busio/UART.c:367 ports/nrf/common-hal/busio/UART.c:372
+#: ports/nrf/common-hal/busio/UART.c:378 ports/nrf/common-hal/busio/UART.c:383
+#: ports/nrf/common-hal/busio/UART.c:388 ports/nrf/common-hal/busio/UART.c:392
+#: ports/nrf/common-hal/busio/UART.c:400
 msgid "busio.UART not available"
 msgstr "busio.UART no disponible"
 
@@ -2585,18 +2585,35 @@ msgid ""
 "exit safe mode.\n"
 msgstr ""
 
-#~ msgid "Cannot apply GAP parameters."
-#~ msgstr "No se pueden aplicar los parámetros GAP."
-
 #~ msgid "Can not add Characteristic."
 #~ msgstr "No se puede agregar la Característica."
 
+#~ msgid "Cannot apply GAP parameters."
+#~ msgstr "No se pueden aplicar los parámetros GAP."
+
 #~ msgid "Can not apply device name in the stack."
 #~ msgstr "No se puede aplicar el nombre del dispositivo en el stack."
 
+#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
+#~ msgstr ""
+#~ "Parece que nuestro código CircuitPython dejó de funcionar. Whoops!\n"
+
+#~ msgid "Baud rate too high for this SPI peripheral"
+#~ msgstr "Baud rate demasiado alto para este periférico SPI"
+
 #~ msgid "Can not encode UUID, to check length."
 #~ msgstr "No se puede codificar el UUID, para revisar la longitud."
 
+#~ msgid "Can not query for the device address."
+#~ msgstr "No se puede consultar la dirección del dispositivo."
+
+#, fuzzy
+#~ msgid ""
+#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
+#~ msgstr ""
+#~ "Por favor registra un issue en la siguiente URL con el contenidos de tu "
+#~ "unidad de almacenamiento CIRCUITPY:\n"
+
 #~ msgid "Can encode UUID into the advertisement packet."
 #~ msgstr "Se puede codificar el UUID en el paquete de anuncio."
 
@@ -2606,12 +2623,6 @@ msgstr ""
 #~ msgid "Can not add Service."
 #~ msgstr "No se puede agregar el Servicio."
 
-#~ msgid "Can not query for the device address."
-#~ msgstr "No se puede consultar la dirección del dispositivo."
-
-#~ msgid "Baud rate too high for this SPI peripheral"
-#~ msgstr "Baud rate demasiado alto para este periférico SPI"
-
 #~ msgid "Can not apply advertisement data. status: 0x%02x"
 #~ msgstr "No se puede aplicar los datos de anuncio. status: 0x%02x"
 
@@ -2624,14 +2635,3 @@ msgstr ""
 #~ msgstr ""
 #~ "suficiente poder para todo el circuito y presiona reset (después de "
 #~ "expulsar CIRCUITPY).\n"
-
-#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
-#~ msgstr ""
-#~ "Parece que nuestro código CircuitPython dejó de funcionar. Whoops!\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
-#~ msgstr ""
-#~ "Por favor registra un issue en la siguiente URL con el contenidos de tu "
-#~ "unidad de almacenamiento CIRCUITPY:\n"
diff --git a/locale/fil.po b/locale/fil.po
index 53ca5d22a..0755ad8a7 100644
--- a/locale/fil.po
+++ b/locale/fil.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-12-26 20:49+0100\n"
+"POT-Creation-Date: 2019-01-10 11:05-0800\n"
 "PO-Revision-Date: 2018-12-20 22:15-0800\n"
 "Last-Translator: Timothy <me@timothygarcia.ca>\n"
 "Language-Team: fil\n"
@@ -333,7 +333,7 @@ msgstr "Hindi sapat ang magagamit na pins"
 #: ports/atmel-samd/common-hal/busio/SPI.c:171
 #: ports/atmel-samd/common-hal/busio/UART.c:120
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c:45
-#: ports/nrf/common-hal/busio/I2C.c:82
+#: ports/nrf/common-hal/busio/I2C.c:84
 msgid "Invalid pins"
 msgstr "Mali ang pins"
 
@@ -350,12 +350,12 @@ msgid "bytes > 8 bits not supported"
 msgstr "hindi sinusuportahan ang bytes > 8 bits"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:73
-#: ports/nrf/common-hal/busio/UART.c:106
+#: ports/nrf/common-hal/busio/UART.c:118
 msgid "tx and rx cannot both be None"
 msgstr "tx at rx hindi pwedeng parehas na None"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:146
-#: ports/nrf/common-hal/busio/UART.c:140
+#: ports/nrf/common-hal/busio/UART.c:152
 msgid "Failed to allocate RX buffer"
 msgstr "Nabigong ilaan ang RX buffer"
 
@@ -364,12 +364,12 @@ msgid "Could not initialize UART"
 msgstr "Hindi ma-initialize ang UART"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:241
-#: ports/nrf/common-hal/busio/UART.c:185
+#: ports/nrf/common-hal/busio/UART.c:197
 msgid "No RX pin"
 msgstr "Walang RX pin"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:300
-#: ports/nrf/common-hal/busio/UART.c:220
+#: ports/nrf/common-hal/busio/UART.c:232
 msgid "No TX pin"
 msgstr "Walang TX pin"
 
@@ -773,7 +773,7 @@ msgstr "Mali ang UUID string length"
 msgid "Invalid UUID parameter"
 msgstr "Mali ang UUID parameter"
 
-#: ports/nrf/common-hal/busio/I2C.c:96
+#: ports/nrf/common-hal/busio/I2C.c:98
 msgid "All I2C peripherals are in use"
 msgstr "Lahat ng I2C peripherals ginagamit"
 
@@ -786,19 +786,19 @@ msgstr "Lahat ng SPI peripherals ay ginagamit"
 msgid "error = 0x%08lX"
 msgstr "error = 0x%08lX"
 
-#: ports/nrf/common-hal/busio/UART.c:110
+#: ports/nrf/common-hal/busio/UART.c:122
 msgid "Invalid buffer size"
 msgstr "Mali ang buffer size"
 
-#: ports/nrf/common-hal/busio/UART.c:114
+#: ports/nrf/common-hal/busio/UART.c:126
 msgid "Odd parity is not supported"
 msgstr "Odd na parity ay hindi supportado"
 
-#: ports/nrf/common-hal/busio/UART.c:346 ports/nrf/common-hal/busio/UART.c:350
-#: ports/nrf/common-hal/busio/UART.c:355 ports/nrf/common-hal/busio/UART.c:360
-#: ports/nrf/common-hal/busio/UART.c:366 ports/nrf/common-hal/busio/UART.c:371
-#: ports/nrf/common-hal/busio/UART.c:376 ports/nrf/common-hal/busio/UART.c:380
-#: ports/nrf/common-hal/busio/UART.c:388
+#: ports/nrf/common-hal/busio/UART.c:358 ports/nrf/common-hal/busio/UART.c:362
+#: ports/nrf/common-hal/busio/UART.c:367 ports/nrf/common-hal/busio/UART.c:372
+#: ports/nrf/common-hal/busio/UART.c:378 ports/nrf/common-hal/busio/UART.c:383
+#: ports/nrf/common-hal/busio/UART.c:388 ports/nrf/common-hal/busio/UART.c:392
+#: ports/nrf/common-hal/busio/UART.c:400
 msgid "busio.UART not available"
 msgstr "busio.UART hindi available"
 
@@ -2600,18 +2600,35 @@ msgstr ""
 "Ang reset button ay pinindot habang nag boot ang CircuitPython. Pindutin "
 "ulit para lumabas sa safe mode.\n"
 
-#~ msgid "Cannot apply GAP parameters."
-#~ msgstr "Hindi ma-apply ang GAP parameters."
-
 #~ msgid "Can not add Characteristic."
 #~ msgstr "Hindi mabasa and Characteristic."
 
+#~ msgid "Cannot apply GAP parameters."
+#~ msgstr "Hindi ma-apply ang GAP parameters."
+
 #~ msgid "Can not apply device name in the stack."
 #~ msgstr "Hindi maaaring ma-aplay ang device name sa stack."
 
+#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
+#~ msgstr ""
+#~ "Mukhang ang core CircuitPython code ay nag-crash ng malakas. Aray!\n"
+
+#, fuzzy
+#~ msgid "palette must be displayio.Palette"
+#~ msgstr "ang palette ay dapat 32 bytes ang haba"
+
 #~ msgid "Can not encode UUID, to check length."
 #~ msgstr "Hindi ma-encode UUID, para suriin ang haba."
 
+#~ msgid "Can not query for the device address."
+#~ msgstr "Hindi maaaring mag-query para sa address ng device."
+
+#~ msgid ""
+#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
+#~ msgstr ""
+#~ "Mag-file ng isang isyu dito gamit ang mga nilalaman ng iyong CIRCUITPY "
+#~ "drive:\n"
+
 #~ msgid "Can encode UUID into the advertisement packet."
 #~ msgstr "Maaring i-encode ang UUID sa advertisement packet."
 
@@ -2621,13 +2638,6 @@ msgstr ""
 #~ msgid "Can not add Service."
 #~ msgstr "Hindi maidaragdag ang serbisyo."
 
-#~ msgid "Can not query for the device address."
-#~ msgstr "Hindi maaaring mag-query para sa address ng device."
-
-#, fuzzy
-#~ msgid "palette must be displayio.Palette"
-#~ msgstr "ang palette ay dapat 32 bytes ang haba"
-
 #~ msgid "Can not apply advertisement data. status: 0x%02x"
 #~ msgstr "Hindi ma i-apply ang advertisement data. status: 0x%02x"
 
@@ -2640,13 +2650,3 @@ msgstr ""
 #~ msgstr ""
 #~ "ay nagbibigay ng sapat na power para sa buong circuit at i-press ang "
 #~ "reset (pagkatapos i-eject ang CIRCUITPY).\n"
-
-#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
-#~ msgstr ""
-#~ "Mukhang ang core CircuitPython code ay nag-crash ng malakas. Aray!\n"
-
-#~ msgid ""
-#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
-#~ msgstr ""
-#~ "Mag-file ng isang isyu dito gamit ang mga nilalaman ng iyong CIRCUITPY "
-#~ "drive:\n"
diff --git a/locale/fr.po b/locale/fr.po
index 61781fe5b..6c41ffaea 100644
--- a/locale/fr.po
+++ b/locale/fr.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: 0.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-12-26 20:49+0100\n"
+"POT-Creation-Date: 2019-01-10 11:05-0800\n"
 "PO-Revision-Date: 2018-12-23 20:05+0100\n"
 "Last-Translator: Pierrick Couturier <arofarn@arofarn.info>\n"
 "Language-Team: fr\n"
@@ -330,7 +330,7 @@ msgstr "Pas assez de broches disponibles"
 #: ports/atmel-samd/common-hal/busio/SPI.c:171
 #: ports/atmel-samd/common-hal/busio/UART.c:120
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c:45
-#: ports/nrf/common-hal/busio/I2C.c:82
+#: ports/nrf/common-hal/busio/I2C.c:84
 msgid "Invalid pins"
 msgstr "Broches invalides"
 
@@ -347,12 +347,12 @@ msgid "bytes > 8 bits not supported"
 msgstr "octets > 8 bits non supporté"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:73
-#: ports/nrf/common-hal/busio/UART.c:106
+#: ports/nrf/common-hal/busio/UART.c:118
 msgid "tx and rx cannot both be None"
 msgstr "tx et rx ne peuvent être None tous les deux"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:146
-#: ports/nrf/common-hal/busio/UART.c:140
+#: ports/nrf/common-hal/busio/UART.c:152
 msgid "Failed to allocate RX buffer"
 msgstr "Echec de l'allocation du tampon RX"
 
@@ -361,12 +361,12 @@ msgid "Could not initialize UART"
 msgstr "L'UART n'a pu être initialisé"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:241
-#: ports/nrf/common-hal/busio/UART.c:185
+#: ports/nrf/common-hal/busio/UART.c:197
 msgid "No RX pin"
 msgstr "Pas de broche RX"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:300
-#: ports/nrf/common-hal/busio/UART.c:220
+#: ports/nrf/common-hal/busio/UART.c:232
 msgid "No TX pin"
 msgstr "Pas de broche TX"
 
@@ -771,7 +771,7 @@ msgstr "Longeur de chaîne UUID invalide"
 msgid "Invalid UUID parameter"
 msgstr "Paramètre UUID invalide"
 
-#: ports/nrf/common-hal/busio/I2C.c:96
+#: ports/nrf/common-hal/busio/I2C.c:98
 #, fuzzy
 msgid "All I2C peripherals are in use"
 msgstr "Tous les périphériques I2C sont utilisés"
@@ -786,21 +786,21 @@ msgstr "Tous les périphériques SPI sont utilisés"
 msgid "error = 0x%08lX"
 msgstr "erreur = 0x%08lX"
 
-#: ports/nrf/common-hal/busio/UART.c:110
+#: ports/nrf/common-hal/busio/UART.c:122
 #, fuzzy
 msgid "Invalid buffer size"
 msgstr "longueur de tampon invalide"
 
-#: ports/nrf/common-hal/busio/UART.c:114
+#: ports/nrf/common-hal/busio/UART.c:126
 #, fuzzy
 msgid "Odd parity is not supported"
 msgstr "parité impaire non supportée"
 
-#: ports/nrf/common-hal/busio/UART.c:346 ports/nrf/common-hal/busio/UART.c:350
-#: ports/nrf/common-hal/busio/UART.c:355 ports/nrf/common-hal/busio/UART.c:360
-#: ports/nrf/common-hal/busio/UART.c:366 ports/nrf/common-hal/busio/UART.c:371
-#: ports/nrf/common-hal/busio/UART.c:376 ports/nrf/common-hal/busio/UART.c:380
-#: ports/nrf/common-hal/busio/UART.c:388
+#: ports/nrf/common-hal/busio/UART.c:358 ports/nrf/common-hal/busio/UART.c:362
+#: ports/nrf/common-hal/busio/UART.c:367 ports/nrf/common-hal/busio/UART.c:372
+#: ports/nrf/common-hal/busio/UART.c:378 ports/nrf/common-hal/busio/UART.c:383
+#: ports/nrf/common-hal/busio/UART.c:388 ports/nrf/common-hal/busio/UART.c:392
+#: ports/nrf/common-hal/busio/UART.c:400
 #, fuzzy
 msgid "busio.UART not available"
 msgstr "busio.UART n'est pas disponible"
@@ -2641,20 +2641,12 @@ msgstr ""
 #~ msgstr ""
 #~ "SVP, remontez le problème là avec le contenu du lecteur CIRCUITPY:\n"
 
-#~ msgid "Can not add Service."
-#~ msgstr "Impossible d'ajouter le Service"
-
-#~ msgid "Invalid Service type"
-#~ msgstr "Type de service invalide"
-
-#~ msgid "Can not encode UUID, to check length."
-#~ msgstr "Impossible d'encoder l'UUID pour vérifier la longueur."
-
-#~ msgid "Can not add Characteristic."
-#~ msgstr "Impossible d'ajouter la Characteristic."
+#, fuzzy
+#~ msgid "value_size must be power of two"
+#~ msgstr "value_size doit être une puissance de 2"
 
-#~ msgid "Can not query for the device address."
-#~ msgstr "Impossible d'obtenir l'adresse du périphérique"
+#~ msgid "Cannot set PPCP parameters."
+#~ msgstr "Impossible d'appliquer les paramètres PPCP"
 
 #~ msgid ""
 #~ "enough power for the whole circuit and press reset (after ejecting "
@@ -2663,19 +2655,27 @@ msgstr ""
 #~ "assez de puissance pour l'ensemble du circuit et appuyez sur "
 #~ "'reset' (après avoir éjecter CIRCUITPY).\n"
 
-#~ msgid "Cannot set PPCP parameters."
-#~ msgstr "Impossible d'appliquer les paramètres PPCP"
+#, fuzzy
+#~ msgid "palette must be displayio.Palette"
+#~ msgstr "la palette doit être une displayio.Palette"
+
+#~ msgid "Can not encode UUID, to check length."
+#~ msgstr "Impossible d'encoder l'UUID pour vérifier la longueur."
+
+#~ msgid "Can not add Service."
+#~ msgstr "Impossible d'ajouter le Service"
+
+#~ msgid "Can not add Characteristic."
+#~ msgstr "Impossible d'ajouter la Characteristic."
 
 #~ msgid "Can not apply device name in the stack."
 #~ msgstr "Impossible d'appliquer le nom de périphérique dans la pile"
 
+#~ msgid "Can not query for the device address."
+#~ msgstr "Impossible d'obtenir l'adresse du périphérique"
+
 #~ msgid "Cannot apply GAP parameters."
 #~ msgstr "Impossible d'appliquer les paramètres GAP"
 
-#, fuzzy
-#~ msgid "value_size must be power of two"
-#~ msgstr "value_size doit être une puissance de 2"
-
-#, fuzzy
-#~ msgid "palette must be displayio.Palette"
-#~ msgstr "la palette doit être une displayio.Palette"
+#~ msgid "Invalid Service type"
+#~ msgstr "Type de service invalide"
diff --git a/locale/it_IT.po b/locale/it_IT.po
index 4cb328319..3003d8c91 100644
--- a/locale/it_IT.po
+++ b/locale/it_IT.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-12-26 20:49+0100\n"
+"POT-Creation-Date: 2019-01-10 11:05-0800\n"
 "PO-Revision-Date: 2018-10-02 16:27+0200\n"
 "Last-Translator: Enrico Paganin <enrico.paganin@mail.com>\n"
 "Language-Team: \n"
@@ -334,7 +334,7 @@ msgstr "Non sono presenti abbastanza pin"
 #: ports/atmel-samd/common-hal/busio/SPI.c:171
 #: ports/atmel-samd/common-hal/busio/UART.c:120
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c:45
-#: ports/nrf/common-hal/busio/I2C.c:82
+#: ports/nrf/common-hal/busio/I2C.c:84
 msgid "Invalid pins"
 msgstr "Pin non validi"
 
@@ -351,12 +351,12 @@ msgid "bytes > 8 bits not supported"
 msgstr "byte > 8 bit non supportati"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:73
-#: ports/nrf/common-hal/busio/UART.c:106
+#: ports/nrf/common-hal/busio/UART.c:118
 msgid "tx and rx cannot both be None"
 msgstr "tx e rx non possono essere entrambi None"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:146
-#: ports/nrf/common-hal/busio/UART.c:140
+#: ports/nrf/common-hal/busio/UART.c:152
 msgid "Failed to allocate RX buffer"
 msgstr "Impossibile allocare buffer RX"
 
@@ -365,12 +365,12 @@ msgid "Could not initialize UART"
 msgstr "Impossibile inizializzare l'UART"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:241
-#: ports/nrf/common-hal/busio/UART.c:185
+#: ports/nrf/common-hal/busio/UART.c:197
 msgid "No RX pin"
 msgstr "Nessun pin RX"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:300
-#: ports/nrf/common-hal/busio/UART.c:220
+#: ports/nrf/common-hal/busio/UART.c:232
 msgid "No TX pin"
 msgstr "Nessun pin TX"
 
@@ -774,7 +774,7 @@ msgstr "Lunghezza della stringa UUID non valida"
 msgid "Invalid UUID parameter"
 msgstr "Parametro UUID non valido"
 
-#: ports/nrf/common-hal/busio/I2C.c:96
+#: ports/nrf/common-hal/busio/I2C.c:98
 msgid "All I2C peripherals are in use"
 msgstr "Tutte le periferiche I2C sono in uso"
 
@@ -787,21 +787,21 @@ msgstr "Tutte le periferiche SPI sono in uso"
 msgid "error = 0x%08lX"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:110
+#: ports/nrf/common-hal/busio/UART.c:122
 #, fuzzy
 msgid "Invalid buffer size"
 msgstr "lunghezza del buffer non valida"
 
-#: ports/nrf/common-hal/busio/UART.c:114
+#: ports/nrf/common-hal/busio/UART.c:126
 #, fuzzy
 msgid "Odd parity is not supported"
 msgstr "operazione I2C non supportata"
 
-#: ports/nrf/common-hal/busio/UART.c:346 ports/nrf/common-hal/busio/UART.c:350
-#: ports/nrf/common-hal/busio/UART.c:355 ports/nrf/common-hal/busio/UART.c:360
-#: ports/nrf/common-hal/busio/UART.c:366 ports/nrf/common-hal/busio/UART.c:371
-#: ports/nrf/common-hal/busio/UART.c:376 ports/nrf/common-hal/busio/UART.c:380
-#: ports/nrf/common-hal/busio/UART.c:388
+#: ports/nrf/common-hal/busio/UART.c:358 ports/nrf/common-hal/busio/UART.c:362
+#: ports/nrf/common-hal/busio/UART.c:367 ports/nrf/common-hal/busio/UART.c:372
+#: ports/nrf/common-hal/busio/UART.c:378 ports/nrf/common-hal/busio/UART.c:383
+#: ports/nrf/common-hal/busio/UART.c:388 ports/nrf/common-hal/busio/UART.c:392
+#: ports/nrf/common-hal/busio/UART.c:400
 #, fuzzy
 msgid "busio.UART not available"
 msgstr "busio.UART non ancora implementato"
@@ -2607,15 +2607,29 @@ msgstr ""
 #~ msgid "Can not apply advertisement data. status: 0x%02x"
 #~ msgstr "Impossible inserire dati advertisement. status: 0x%02x"
 
-#~ msgid "Cannot apply GAP parameters."
-#~ msgstr "Impossibile applicare i parametri GAP."
+#~ msgid ""
+#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
+#~ msgstr ""
+#~ "Ti preghiamo di compilare una issue con il contenuto del tuo drie "
+#~ "CIRCUITPY:\n"
 
-#~ msgid "Can not apply device name in the stack."
-#~ msgstr "Non è possibile inserire il nome del dipositivo nella lista."
+#~ msgid "Can not encode UUID, to check length."
+#~ msgstr "Non è possibile codificare l'UUID, lunghezza da controllare."
+
+#~ msgid "Can not add Characteristic."
+#~ msgstr "Non è possibile aggiungere Characteristic."
+
+#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
+#~ msgstr ""
+#~ "Sembra che il codice del core di CircuitPython sia crashato malamente. "
+#~ "Whoops!\n"
 
 #~ msgid "Cannot set PPCP parameters."
 #~ msgstr "Impossibile impostare i parametri PPCP."
 
+#~ msgid "Cannot apply GAP parameters."
+#~ msgstr "Impossibile applicare i parametri GAP."
+
 #~ msgid ""
 #~ "enough power for the whole circuit and press reset (after ejecting "
 #~ "CIRCUITPY).\n"
@@ -2623,28 +2637,14 @@ msgstr ""
 #~ "abbastanza potenza per l'intero circuito e premere reset (dopo aver "
 #~ "espulso CIRCUITPY).\n"
 
-#~ msgid "Can not query for the device address."
-#~ msgstr "Non è possibile trovare l'indirizzo del dispositivo."
-
-#~ msgid "Can not add Characteristic."
-#~ msgstr "Non è possibile aggiungere Characteristic."
-
-#~ msgid "Can not encode UUID, to check length."
-#~ msgstr "Non è possibile codificare l'UUID, lunghezza da controllare."
-
 #~ msgid "Can encode UUID into the advertisement packet."
 #~ msgstr "È possibile codificare l'UUID nel pacchetto di advertisement."
 
+#~ msgid "Can not query for the device address."
+#~ msgstr "Non è possibile trovare l'indirizzo del dispositivo."
+
 #~ msgid "Can not add Service."
 #~ msgstr "Non è possibile aggiungere Service."
 
-#~ msgid ""
-#~ "Please file an issue here with the contents of your CIRCUITPY drive:\n"
-#~ msgstr ""
-#~ "Ti preghiamo di compilare una issue con il contenuto del tuo drie "
-#~ "CIRCUITPY:\n"
-
-#~ msgid "Looks like our core CircuitPython code crashed hard. Whoops!\n"
-#~ msgstr ""
-#~ "Sembra che il codice del core di CircuitPython sia crashato malamente. "
-#~ "Whoops!\n"
+#~ msgid "Can not apply device name in the stack."
+#~ msgstr "Non è possibile inserire il nome del dipositivo nella lista."
diff --git a/locale/pt_BR.po b/locale/pt_BR.po
index 1b35b4824..56810874a 100644
--- a/locale/pt_BR.po
+++ b/locale/pt_BR.po
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-12-26 20:49+0100\n"
+"POT-Creation-Date: 2019-01-10 11:05-0800\n"
 "PO-Revision-Date: 2018-10-02 21:14-0000\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -329,7 +329,7 @@ msgstr "Não há pinos suficientes disponíveis"
 #: ports/atmel-samd/common-hal/busio/SPI.c:171
 #: ports/atmel-samd/common-hal/busio/UART.c:120
 #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c:45
-#: ports/nrf/common-hal/busio/I2C.c:82
+#: ports/nrf/common-hal/busio/I2C.c:84
 msgid "Invalid pins"
 msgstr "Pinos inválidos"
 
@@ -346,12 +346,12 @@ msgid "bytes > 8 bits not supported"
 msgstr "bytes > 8 bits não suportado"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:73
-#: ports/nrf/common-hal/busio/UART.c:106
+#: ports/nrf/common-hal/busio/UART.c:118
 msgid "tx and rx cannot both be None"
 msgstr "TX e RX não podem ser ambos"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:146
-#: ports/nrf/common-hal/busio/UART.c:140
+#: ports/nrf/common-hal/busio/UART.c:152
 msgid "Failed to allocate RX buffer"
 msgstr "Falha ao alocar buffer RX"
 
@@ -360,12 +360,12 @@ msgid "Could not initialize UART"
 msgstr "Não foi possível inicializar o UART"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:241
-#: ports/nrf/common-hal/busio/UART.c:185
+#: ports/nrf/common-hal/busio/UART.c:197
 msgid "No RX pin"
 msgstr "Nenhum pino RX"
 
 #: ports/atmel-samd/common-hal/busio/UART.c:300
-#: ports/nrf/common-hal/busio/UART.c:220
+#: ports/nrf/common-hal/busio/UART.c:232
 msgid "No TX pin"
 msgstr "Nenhum pino TX"
 
@@ -767,7 +767,7 @@ msgstr ""
 msgid "Invalid UUID parameter"
 msgstr "Parâmetro UUID inválido"
 
-#: ports/nrf/common-hal/busio/I2C.c:96
+#: ports/nrf/common-hal/busio/I2C.c:98
 msgid "All I2C peripherals are in use"
 msgstr "Todos os periféricos I2C estão em uso"
 
@@ -780,21 +780,21 @@ msgstr "Todos os periféricos SPI estão em uso"
 msgid "error = 0x%08lX"
 msgstr "erro = 0x%08lX"
 
-#: ports/nrf/common-hal/busio/UART.c:110
+#: ports/nrf/common-hal/busio/UART.c:122
 #, fuzzy
 msgid "Invalid buffer size"
 msgstr "Arquivo inválido"
 
-#: ports/nrf/common-hal/busio/UART.c:114
+#: ports/nrf/common-hal/busio/UART.c:126
 #, fuzzy
 msgid "Odd parity is not supported"
 msgstr "I2C operação não suportada"
 
-#: ports/nrf/common-hal/busio/UART.c:346 ports/nrf/common-hal/busio/UART.c:350
-#: ports/nrf/common-hal/busio/UART.c:355 ports/nrf/common-hal/busio/UART.c:360
-#: ports/nrf/common-hal/busio/UART.c:366 ports/nrf/common-hal/busio/UART.c:371
-#: ports/nrf/common-hal/busio/UART.c:376 ports/nrf/common-hal/busio/UART.c:380
-#: ports/nrf/common-hal/busio/UART.c:388
+#: ports/nrf/common-hal/busio/UART.c:358 ports/nrf/common-hal/busio/UART.c:362
+#: ports/nrf/common-hal/busio/UART.c:367 ports/nrf/common-hal/busio/UART.c:372
+#: ports/nrf/common-hal/busio/UART.c:378 ports/nrf/common-hal/busio/UART.c:383
+#: ports/nrf/common-hal/busio/UART.c:388 ports/nrf/common-hal/busio/UART.c:392
+#: ports/nrf/common-hal/busio/UART.c:400
 msgid "busio.UART not available"
 msgstr "busio.UART não disponível"
 
@@ -2557,32 +2557,32 @@ msgid ""
 "exit safe mode.\n"
 msgstr ""
 
+#~ msgid "Can not add Service."
+#~ msgstr "Não é possível adicionar o serviço."
+
+#~ msgid "Can not apply advertisement data. status: 0x%02x"
+#~ msgstr "Não é possível aplicar dados de anúncio. status: 0x%02x"
+
 #~ msgid "Can not apply device name in the stack."
 #~ msgstr "Não é possível aplicar o nome do dispositivo na pilha."
 
-#~ msgid "Can not add Characteristic."
-#~ msgstr "Não é possível adicionar Característica."
+#~ msgid "Baud rate too high for this SPI peripheral"
+#~ msgstr "Taxa de transmissão muito alta para esse periférico SPI"
 
-#~ msgid "Can encode UUID into the advertisement packet."
-#~ msgstr "Pode codificar o UUID no pacote de anúncios."
+#~ msgid "Cannot apply GAP parameters."
+#~ msgstr "Não é possível aplicar parâmetros GAP."
 
 #~ msgid "Invalid Service type"
 #~ msgstr "Tipo de serviço inválido"
 
-#~ msgid "Cannot apply GAP parameters."
-#~ msgstr "Não é possível aplicar parâmetros GAP."
-
-#~ msgid "Cannot set PPCP parameters."
-#~ msgstr "Não é possível definir parâmetros PPCP."
+#~ msgid "Can encode UUID into the advertisement packet."
+#~ msgstr "Pode codificar o UUID no pacote de anúncios."
 
 #~ msgid "Can not query for the device address."
 #~ msgstr "Não é possível consultar o endereço do dispositivo."
 
-#~ msgid "Baud rate too high for this SPI peripheral"
-#~ msgstr "Taxa de transmissão muito alta para esse periférico SPI"
-
-#~ msgid "Can not apply advertisement data. status: 0x%02x"
-#~ msgstr "Não é possível aplicar dados de anúncio. status: 0x%02x"
+#~ msgid "Can not add Characteristic."
+#~ msgstr "Não é possível adicionar Característica."
 
-#~ msgid "Can not add Service."
-#~ msgstr "Não é possível adicionar o serviço."
+#~ msgid "Cannot set PPCP parameters."
+#~ msgstr "Não é possível definir parâmetros PPCP."