Merge pull request #1 from adafruit/main

merge from adafruit

1 files changed, 634 insertions, 0 deletions

diff --git a/ports/atmel-samd/asf4_conf/same51/hpl_oscctrl_config.h b/ports/atmel-samd/asf4_conf/same51/hpl_oscctrl_config.h
new file mode 100644
index 000000000..cd1186605
--- /dev/null
+++ b/ports/atmel-samd/asf4_conf/same51/hpl_oscctrl_config.h
@@ -0,0 +1,634 @@
+/* Auto-generated config file hpl_oscctrl_config.h */
+#ifndef HPL_OSCCTRL_CONFIG_H
+#define HPL_OSCCTRL_CONFIG_H
+
+// <<< Use Configuration Wizard in Context Menu >>>
+
+// <e> External Multipurpose Crystal Oscillator Configuration
+// <i> Indicates whether configuration for XOSC0 is enabled or not
+// <id> enable_xosc0
+#ifndef CONF_XOSC0_CONFIG
+#define CONF_XOSC0_CONFIG 0
+#endif
+
+// <o> Frequency <8000000-48000000>
+// <i> Oscillation frequency of the resonator connected to the External Multipurpose Crystal Oscillator.
+// <id> xosc0_frequency
+#ifndef CONF_XOSC_FREQUENCY
+#define CONF_XOSC0_FREQUENCY 12000000
+#endif
+
+// <h> External Multipurpose Crystal Oscillator Control
+// <q> Oscillator enable
+// <i> Indicates whether External Multipurpose Crystal Oscillator is enabled or not
+// <id> xosc0_arch_enable
+#ifndef CONF_XOSC0_ENABLE
+#define CONF_XOSC0_ENABLE 0
+#endif
+
+// <o> Start-Up Time
+// <0x0=>31us
+// <0x1=>61us
+// <0x2=>122us
+// <0x3=>244us
+// <0x4=>488us
+// <0x5=>977us
+// <0x6=>1953us
+// <0x7=>3906us
+// <0x8=>7813us
+// <0x9=>15625us
+// <0xA=>31250us
+// <0xB=>62500us
+// <0xC=>125000us
+// <0xD=>250000us
+// <0xE=>500000us
+// <0xF=>1000000us
+// <id> xosc0_arch_startup
+#ifndef CONF_XOSC0_STARTUP
+#define CONF_XOSC0_STARTUP 0
+#endif
+
+// <q> Clock Switch Back
+// <i> Indicates whether Clock Switch Back is enabled or not
+// <id> xosc0_arch_swben
+#ifndef CONF_XOSC0_SWBEN
+#define CONF_XOSC0_SWBEN 0
+#endif
+
+// <q> Clock Failure Detector
+// <i> Indicates whether Clock Failure Detector is enabled or not
+// <id> xosc0_arch_cfden
+#ifndef CONF_XOSC0_CFDEN
+#define CONF_XOSC0_CFDEN 0
+#endif
+
+// <q> Automatic Loop Control Enable
+// <i> Indicates whether Automatic Loop Control is enabled or not
+// <id> xosc0_arch_enalc
+#ifndef CONF_XOSC0_ENALC
+#define CONF_XOSC0_ENALC 0
+#endif
+
+// <q> Low Buffer Gain Enable
+// <i> Indicates whether Low Buffer Gain is enabled or not
+// <id> xosc0_arch_lowbufgain
+#ifndef CONF_XOSC0_LOWBUFGAIN
+#define CONF_XOSC0_LOWBUFGAIN 0
+#endif
+
+// <q> On Demand Control
+// <i> Indicates whether On Demand Control is enabled or not
+// <id> xosc0_arch_ondemand
+#ifndef CONF_XOSC0_ONDEMAND
+#define CONF_XOSC0_ONDEMAND 0
+#endif
+
+// <q> Run in Standby
+// <i> Indicates whether Run in Standby is enabled or not
+// <id> xosc0_arch_runstdby
+#ifndef CONF_XOSC0_RUNSTDBY
+#define CONF_XOSC0_RUNSTDBY 0
+#endif
+
+// <q> Crystal connected to XIN/XOUT Enable
+// <i> Indicates whether the connections between the I/O pads and the external clock or crystal oscillator is enabled or not
+// <id> xosc0_arch_xtalen
+#ifndef CONF_XOSC0_XTALEN
+#define CONF_XOSC0_XTALEN 0
+#endif
+//</h>
+//</e>
+
+#if CONF_XOSC0_FREQUENCY >= 32000000
+#define CONF_XOSC0_CFDPRESC 0x0
+#define CONF_XOSC0_IMULT 0x7
+#define CONF_XOSC0_IPTAT 0x3
+#elif CONF_XOSC0_FREQUENCY >= 24000000
+#define CONF_XOSC0_CFDPRESC 0x1
+#define CONF_XOSC0_IMULT 0x6
+#define CONF_XOSC0_IPTAT 0x3
+#elif CONF_XOSC0_FREQUENCY >= 16000000
+#define CONF_XOSC0_CFDPRESC 0x2
+#define CONF_XOSC0_IMULT 0x5
+#define CONF_XOSC0_IPTAT 0x3
+#elif CONF_XOSC0_FREQUENCY >= 8000000
+#define CONF_XOSC0_CFDPRESC 0x3
+#define CONF_XOSC0_IMULT 0x4
+#define CONF_XOSC0_IPTAT 0x3
+#endif
+
+// <e> External Multipurpose Crystal Oscillator Configuration
+// <i> Indicates whether configuration for XOSC1 is enabled or not
+// <id> enable_xosc1
+#ifndef CONF_XOSC1_CONFIG
+#define CONF_XOSC1_CONFIG 0
+#endif
+
+// <o> Frequency <8000000-48000000>
+// <i> Oscillation frequency of the resonator connected to the External Multipurpose Crystal Oscillator.
+// <id> xosc1_frequency
+#ifndef CONF_XOSC_FREQUENCY
+#define CONF_XOSC1_FREQUENCY 12000000
+#endif
+
+// <h> External Multipurpose Crystal Oscillator Control
+// <q> Oscillator enable
+// <i> Indicates whether External Multipurpose Crystal Oscillator is enabled or not
+// <id> xosc1_arch_enable
+#ifndef CONF_XOSC1_ENABLE
+#define CONF_XOSC1_ENABLE 0
+#endif
+
+// <o> Start-Up Time
+// <0x0=>31us
+// <0x1=>61us
+// <0x2=>122us
+// <0x3=>244us
+// <0x4=>488us
+// <0x5=>977us
+// <0x6=>1953us
+// <0x7=>3906us
+// <0x8=>7813us
+// <0x9=>15625us
+// <0xA=>31250us
+// <0xB=>62500us
+// <0xC=>125000us
+// <0xD=>250000us
+// <0xE=>500000us
+// <0xF=>1000000us
+// <id> xosc1_arch_startup
+#ifndef CONF_XOSC1_STARTUP
+#define CONF_XOSC1_STARTUP 0
+#endif
+
+// <q> Clock Switch Back
+// <i> Indicates whether Clock Switch Back is enabled or not
+// <id> xosc1_arch_swben
+#ifndef CONF_XOSC1_SWBEN
+#define CONF_XOSC1_SWBEN 0
+#endif
+
+// <q> Clock Failure Detector
+// <i> Indicates whether Clock Failure Detector is enabled or not
+// <id> xosc1_arch_cfden
+#ifndef CONF_XOSC1_CFDEN
+#define CONF_XOSC1_CFDEN 0
+#endif
+
+// <q> Automatic Loop Control Enable
+// <i> Indicates whether Automatic Loop Control is enabled or not
+// <id> xosc1_arch_enalc
+#ifndef CONF_XOSC1_ENALC
+#define CONF_XOSC1_ENALC 0
+#endif
+
+// <q> Low Buffer Gain Enable
+// <i> Indicates whether Low Buffer Gain is enabled or not
+// <id> xosc1_arch_lowbufgain
+#ifndef CONF_XOSC1_LOWBUFGAIN
+#define CONF_XOSC1_LOWBUFGAIN 0
+#endif
+
+// <q> On Demand Control
+// <i> Indicates whether On Demand Control is enabled or not
+// <id> xosc1_arch_ondemand
+#ifndef CONF_XOSC1_ONDEMAND
+#define CONF_XOSC1_ONDEMAND 0
+#endif
+
+// <q> Run in Standby
+// <i> Indicates whether Run in Standby is enabled or not
+// <id> xosc1_arch_runstdby
+#ifndef CONF_XOSC1_RUNSTDBY
+#define CONF_XOSC1_RUNSTDBY 0
+#endif
+
+// <q> Crystal connected to XIN/XOUT Enable
+// <i> Indicates whether the connections between the I/O pads and the external clock or crystal oscillator is enabled or not
+// <id> xosc1_arch_xtalen
+#ifndef CONF_XOSC1_XTALEN
+#define CONF_XOSC1_XTALEN 0
+#endif
+//</h>
+//</e>
+
+#if CONF_XOSC1_FREQUENCY >= 32000000
+#define CONF_XOSC1_CFDPRESC 0x0
+#define CONF_XOSC1_IMULT 0x7
+#define CONF_XOSC1_IPTAT 0x3
+#elif CONF_XOSC1_FREQUENCY >= 24000000
+#define CONF_XOSC1_CFDPRESC 0x1
+#define CONF_XOSC1_IMULT 0x6
+#define CONF_XOSC1_IPTAT 0x3
+#elif CONF_XOSC1_FREQUENCY >= 16000000
+#define CONF_XOSC1_CFDPRESC 0x2
+#define CONF_XOSC1_IMULT 0x5
+#define CONF_XOSC1_IPTAT 0x3
+#elif CONF_XOSC1_FREQUENCY >= 8000000
+#define CONF_XOSC1_CFDPRESC 0x3
+#define CONF_XOSC1_IMULT 0x4
+#define CONF_XOSC1_IPTAT 0x3
+#endif
+
+// <e> DFLL Configuration
+// <i> Indicates whether configuration for DFLL is enabled or not
+// <id> enable_dfll
+#ifndef CONF_DFLL_CONFIG
+#define CONF_DFLL_CONFIG 0
+#endif
+
+// <y> Reference Clock Source
+// <GCLK_PCHCTRL_GEN_GCLK0_Val"> Generic clock generator 0
+// <GCLK_PCHCTRL_GEN_GCLK1_Val"> Generic clock generator 1
+// <GCLK_PCHCTRL_GEN_GCLK2_Val"> Generic clock generator 2
+// <GCLK_PCHCTRL_GEN_GCLK3_Val"> Generic clock generator 3
+// <GCLK_PCHCTRL_GEN_GCLK4_Val"> Generic clock generator 4
+// <GCLK_PCHCTRL_GEN_GCLK5_Val"> Generic clock generator 5
+// <GCLK_PCHCTRL_GEN_GCLK6_Val"> Generic clock generator 6
+// <GCLK_PCHCTRL_GEN_GCLK7_Val"> Generic clock generator 7
+// <GCLK_PCHCTRL_GEN_GCLK8_Val"> Generic clock generator 8
+// <GCLK_PCHCTRL_GEN_GCLK9_Val"> Generic clock generator 9
+// <GCLK_PCHCTRL_GEN_GCLK10_Val"> Generic clock generator 10
+// <GCLK_PCHCTRL_GEN_GCLK11_Val"> Generic clock generator 11
+// <i> Select the clock source
+// <id> dfll_ref_clock
+#ifndef CONF_DFLL_GCLK
+#define CONF_DFLL_GCLK GCLK_PCHCTRL_GEN_GCLK3_Val
+#endif
+
+// <h> Digital Frequency Locked Loop Control
+// <q> DFLL Enable
+// <i> Indicates whether DFLL is enabled or not
+// <id> dfll_arch_enable
+#ifndef CONF_DFLL_ENABLE
+#define CONF_DFLL_ENABLE 1
+#endif
+
+// <q> On Demand Control
+// <i> Indicates whether On Demand Control is enabled or not
+// <id> dfll_arch_ondemand
+#ifndef CONF_DFLL_ONDEMAND
+#define CONF_DFLL_ONDEMAND 0
+#endif
+
+// <q> Run in Standby
+// <i> Indicates whether Run in Standby is enabled or not
+// <id> dfll_arch_runstdby
+#ifndef CONF_DFLL_RUNSTDBY
+#define CONF_DFLL_RUNSTDBY 0
+#endif
+
+// <q> USB Clock Recovery Mode
+// <i> Indicates whether USB Clock Recovery Mode is enabled or not
+// <id> dfll_arch_usbcrm
+#ifndef CONF_DFLL_USBCRM
+#define CONF_DFLL_USBCRM 1
+#endif
+
+// <q> Wait Lock
+// <i> Indicates whether Wait Lock is enabled or not
+// <id> dfll_arch_waitlock
+#ifndef CONF_DFLL_WAITLOCK
+#define CONF_DFLL_WAITLOCK 1
+#endif
+
+// <q> Bypass Coarse Lock
+// <i> Indicates whether Bypass Coarse Lock is enabled or not
+// <id> dfll_arch_bplckc
+#ifndef CONF_DFLL_BPLCKC
+#define CONF_DFLL_BPLCKC 0
+#endif
+
+// <q> Quick Lock Disable
+// <i> Indicates whether Quick Lock Disable is enabled or not
+// <id> dfll_arch_qldis
+#ifndef CONF_DFLL_QLDIS
+#define CONF_DFLL_QLDIS 0
+#endif
+
+// <q> Chill Cycle Disable
+// <i> Indicates whether Chill Cycle Disable is enabled or not
+// <id> dfll_arch_ccdis
+#ifndef CONF_DFLL_CCDIS
+#define CONF_DFLL_CCDIS 1
+#endif
+
+// <q> Lose Lock After Wake
+// <i> Indicates whether Lose Lock After Wake is enabled or not
+// <id> dfll_arch_llaw
+#ifndef CONF_DFLL_LLAW
+#define CONF_DFLL_LLAW 0
+#endif
+
+// <q> Stable DFLL Frequency
+// <i> Indicates whether Stable DFLL Frequency is enabled or not
+// <id> dfll_arch_stable
+#ifndef CONF_DFLL_STABLE
+#define CONF_DFLL_STABLE 0
+#endif
+
+// <o> Operating Mode Selection
+// <0=>Open Loop Mode
+// <1=>Closed Loop Mode
+// <id> dfll_mode
+#ifndef CONF_DFLL_MODE
+#define CONF_DFLL_MODE 0x0
+#endif
+
+// <o> Coarse Maximum Step <0x0-0x1F>
+// <id> dfll_arch_cstep
+#ifndef CONF_DFLL_CSTEP
+#define CONF_DFLL_CSTEP 0x1
+#endif
+
+// <o> Fine Maximum Step <0x0-0xFF>
+// <id> dfll_arch_fstep
+#ifndef CONF_DFLL_FSTEP
+#define CONF_DFLL_FSTEP 0x1
+#endif
+
+// <o> DFLL Multiply Factor <0x0-0xFFFF>
+//  <id> dfll_mul
+#ifndef CONF_DFLL_MUL
+#define CONF_DFLL_MUL 0x0
+#endif
+
+// <e> DFLL Calibration Overwrite
+// <i> Indicates whether Overwrite Calibration value of DFLL
+// <id> dfll_arch_calibration
+#ifndef CONF_DFLL_OVERWRITE_CALIBRATION
+#define CONF_DFLL_OVERWRITE_CALIBRATION 0
+#endif
+
+// <o> Coarse Value <0x0-0x3F>
+// <id> dfll_arch_coarse
+#ifndef CONF_DFLL_COARSE
+#define CONF_DFLL_COARSE (0x1f / 4)
+#endif
+
+// <o> Fine Value <0x0-0xFF>
+// <id> dfll_arch_fine
+#ifndef CONF_DFLL_FINE
+#define CONF_DFLL_FINE (0x80)
+#endif
+
+//</e>
+
+//</h>
+
+//</e>
+
+// <e> FDPLL0 Configuration
+// <i> Indicates whether configuration for FDPLL0 is enabled or not
+// <id> enable_fdpll0
+#ifndef CONF_FDPLL0_CONFIG
+#define CONF_FDPLL0_CONFIG 1
+#endif
+
+// <y> Reference Clock Source
+// <GCLK_GENCTRL_SRC_XOSC32K"> 32kHz External Crystal Oscillator (XOSC32K)
+// <GCLK_GENCTRL_SRC_XOSC0"> External Crystal Oscillator 8-48MHz (XOSC0)
+// <GCLK_GENCTRL_SRC_XOSC1"> External Crystal Oscillator 8-48MHz (XOSC1)
+// <GCLK_PCHCTRL_GEN_GCLK0_Val"> Generic clock generator 0
+// <GCLK_PCHCTRL_GEN_GCLK1_Val"> Generic clock generator 1
+// <GCLK_PCHCTRL_GEN_GCLK2_Val"> Generic clock generator 2
+// <GCLK_PCHCTRL_GEN_GCLK3_Val"> Generic clock generator 3
+// <GCLK_PCHCTRL_GEN_GCLK4_Val"> Generic clock generator 4
+// <GCLK_PCHCTRL_GEN_GCLK5_Val"> Generic clock generator 5
+// <GCLK_PCHCTRL_GEN_GCLK6_Val"> Generic clock generator 6
+// <GCLK_PCHCTRL_GEN_GCLK7_Val"> Generic clock generator 7
+// <GCLK_PCHCTRL_GEN_GCLK8_Val"> Generic clock generator 8
+// <GCLK_PCHCTRL_GEN_GCLK9_Val"> Generic clock generator 9
+// <GCLK_PCHCTRL_GEN_GCLK10_Val"> Generic clock generator 10
+// <GCLK_PCHCTRL_GEN_GCLK11_Val"> Generic clock generator 11
+// <i> Select the clock source.
+// <id> fdpll0_ref_clock
+#ifndef CONF_FDPLL0_GCLK
+#define CONF_FDPLL0_GCLK GCLK_PCHCTRL_GEN_GCLK5_Val
+#endif
+
+// <h> Digital Phase Locked Loop Control
+// <q> Enable
+// <i> Indicates whether Digital Phase Locked Loop is enabled or not
+// <id> fdpll0_arch_enable
+#ifndef CONF_FDPLL0_ENABLE
+#define CONF_FDPLL0_ENABLE 1
+#endif
+
+// <q> On Demand Control
+// <i> Indicates whether On Demand Control is enabled or not
+// <id> fdpll0_arch_ondemand
+#ifndef CONF_FDPLL0_ONDEMAND
+#define CONF_FDPLL0_ONDEMAND 0
+#endif
+
+// <q> Run in Standby
+// <i> Indicates whether Run in Standby is enabled or not
+// <id> fdpll0_arch_runstdby
+#ifndef CONF_FDPLL0_RUNSTDBY
+#define CONF_FDPLL0_RUNSTDBY 0
+#endif
+
+// <o> Loop Divider Ratio Fractional Part <0x0-0x1F>
+// <id> fdpll0_ldrfrac
+#ifndef CONF_FDPLL0_LDRFRAC
+#define CONF_FDPLL0_LDRFRAC 0x0
+#endif
+
+// <o> Loop Divider Ratio Integer Part <0x0-0x1FFF>
+// <id> fdpll0_ldr
+#ifndef CONF_FDPLL0_LDR
+#define CONF_FDPLL0_LDR 59
+#endif
+
+// <o> Clock Divider <0x0-0x7FF>
+// <id> fdpll0_clock_div
+#ifndef CONF_FDPLL0_DIV
+#define CONF_FDPLL0_DIV 0x0
+#endif
+
+// <q> DCO Filter Enable
+// <i> Indicates whether DCO Filter Enable is enabled or not
+// <id> fdpll0_arch_dcoen
+#ifndef CONF_FDPLL0_DCOEN
+#define CONF_FDPLL0_DCOEN 0
+#endif
+
+// <o> Sigma-Delta DCO Filter Selection <0x0-0x7>
+// <id> fdpll0_clock_dcofilter
+#ifndef CONF_FDPLL0_DCOFILTER
+#define CONF_FDPLL0_DCOFILTER 0x0
+#endif
+
+// <q> Lock Bypass
+// <i> Indicates whether Lock Bypass is enabled or not
+// <id> fdpll0_arch_lbypass
+#ifndef CONF_FDPLL0_LBYPASS
+#define CONF_FDPLL0_LBYPASS 0
+#endif
+
+// <o> Lock Time
+// <0x0=>No time-out, automatic lock
+// <0x4=>The Time-out if no lock within 800 us
+// <0x5=>The Time-out if no lock within 900 us
+// <0x6=>The Time-out if no lock within 1 ms
+// <0x7=>The Time-out if no lock within 11 ms
+// <id> fdpll0_arch_ltime
+#ifndef CONF_FDPLL0_LTIME
+#define CONF_FDPLL0_LTIME 0x0
+#endif
+
+// <o> Reference Clock Selection
+// <0x0=>GCLK clock reference
+// <0x1=>XOSC32K clock reference
+// <0x2=>XOSC0 clock reference
+// <0x3=>XOSC1 clock reference
+// <id> fdpll0_arch_refclk
+#ifndef CONF_FDPLL0_REFCLK
+#define CONF_FDPLL0_REFCLK 0x0
+#endif
+
+// <q> Wake Up Fast
+// <i> Indicates whether Wake Up Fast is enabled or not
+// <id> fdpll0_arch_wuf
+#ifndef CONF_FDPLL0_WUF
+#define CONF_FDPLL0_WUF 0
+#endif
+
+// <o> Proportional Integral Filter Selection <0x0-0xF>
+// <id> fdpll0_arch_filter
+#ifndef CONF_FDPLL0_FILTER
+#define CONF_FDPLL0_FILTER 0x0
+#endif
+
+//</h>
+//</e>
+// <e> FDPLL1 Configuration
+// <i> Indicates whether configuration for FDPLL1 is enabled or not
+// <id> enable_fdpll1
+#ifndef CONF_FDPLL1_CONFIG
+#define CONF_FDPLL1_CONFIG 0
+#endif
+
+// <y> Reference Clock Source
+// <GCLK_GENCTRL_SRC_XOSC32K"> 32kHz External Crystal Oscillator (XOSC32K)
+// <GCLK_GENCTRL_SRC_XOSC0"> External Crystal Oscillator 8-48MHz (XOSC0)
+// <GCLK_GENCTRL_SRC_XOSC1"> External Crystal Oscillator 8-48MHz (XOSC1)
+// <GCLK_PCHCTRL_GEN_GCLK0_Val"> Generic clock generator 0
+// <GCLK_PCHCTRL_GEN_GCLK1_Val"> Generic clock generator 1
+// <GCLK_PCHCTRL_GEN_GCLK2_Val"> Generic clock generator 2
+// <GCLK_PCHCTRL_GEN_GCLK3_Val"> Generic clock generator 3
+// <GCLK_PCHCTRL_GEN_GCLK4_Val"> Generic clock generator 4
+// <GCLK_PCHCTRL_GEN_GCLK5_Val"> Generic clock generator 5
+// <GCLK_PCHCTRL_GEN_GCLK6_Val"> Generic clock generator 6
+// <GCLK_PCHCTRL_GEN_GCLK7_Val"> Generic clock generator 7
+// <GCLK_PCHCTRL_GEN_GCLK8_Val"> Generic clock generator 8
+// <GCLK_PCHCTRL_GEN_GCLK9_Val"> Generic clock generator 9
+// <GCLK_PCHCTRL_GEN_GCLK10_Val"> Generic clock generator 10
+// <GCLK_PCHCTRL_GEN_GCLK11_Val"> Generic clock generator 11
+// <i> Select the clock source.
+// <id> fdpll1_ref_clock
+#ifndef CONF_FDPLL1_GCLK
+#define CONF_FDPLL1_GCLK GCLK_GENCTRL_SRC_XOSC32K
+#endif
+
+// <h> Digital Phase Locked Loop Control
+// <q> Enable
+// <i> Indicates whether Digital Phase Locked Loop is enabled or not
+// <id> fdpll1_arch_enable
+#ifndef CONF_FDPLL1_ENABLE
+#define CONF_FDPLL1_ENABLE 0
+#endif
+
+// <q> On Demand Control
+// <i> Indicates whether On Demand Control is enabled or not
+// <id> fdpll1_arch_ondemand
+#ifndef CONF_FDPLL1_ONDEMAND
+#define CONF_FDPLL1_ONDEMAND 0
+#endif
+
+// <q> Run in Standby
+// <i> Indicates whether Run in Standby is enabled or not
+// <id> fdpll1_arch_runstdby
+#ifndef CONF_FDPLL1_RUNSTDBY
+#define CONF_FDPLL1_RUNSTDBY 0
+#endif
+
+// <o> Loop Divider Ratio Fractional Part <0x0-0x1F>
+// <id> fdpll1_ldrfrac
+#ifndef CONF_FDPLL1_LDRFRAC
+#define CONF_FDPLL1_LDRFRAC 0xd
+#endif
+
+// <o> Loop Divider Ratio Integer Part <0x0-0x1FFF>
+// <id> fdpll1_ldr
+#ifndef CONF_FDPLL1_LDR
+#define CONF_FDPLL1_LDR 0x5b7
+#endif
+
+// <o> Clock Divider <0x0-0x7FF>
+// <id> fdpll1_clock_div
+#ifndef CONF_FDPLL1_DIV
+#define CONF_FDPLL1_DIV 0x0
+#endif
+
+// <q> DCO Filter Enable
+// <i> Indicates whether DCO Filter Enable is enabled or not
+// <id> fdpll1_arch_dcoen
+#ifndef CONF_FDPLL1_DCOEN
+#define CONF_FDPLL1_DCOEN 0
+#endif
+
+// <o> Sigma-Delta DCO Filter Selection <0x0-0x7>
+// <id> fdpll1_clock_dcofilter
+#ifndef CONF_FDPLL1_DCOFILTER
+#define CONF_FDPLL1_DCOFILTER 0x0
+#endif
+
+// <q> Lock Bypass
+// <i> Indicates whether Lock Bypass is enabled or not
+// <id> fdpll1_arch_lbypass
+#ifndef CONF_FDPLL1_LBYPASS
+#define CONF_FDPLL1_LBYPASS 0
+#endif
+
+// <o> Lock Time
+// <0x0=>No time-out, automatic lock
+// <0x4=>The Time-out if no lock within 800 us
+// <0x5=>The Time-out if no lock within 900 us
+// <0x6=>The Time-out if no lock within 1 ms
+// <0x7=>The Time-out if no lock within 11 ms
+// <id> fdpll1_arch_ltime
+#ifndef CONF_FDPLL1_LTIME
+#define CONF_FDPLL1_LTIME 0x0
+#endif
+
+// <o> Reference Clock Selection
+// <0x0=>GCLK clock reference
+// <0x1=>XOSC32K clock reference
+// <0x2=>XOSC0 clock reference
+// <0x3=>XOSC1 clock reference
+// <id> fdpll1_arch_refclk
+#ifndef CONF_FDPLL1_REFCLK
+#define CONF_FDPLL1_REFCLK 0x1
+#endif
+
+// <q> Wake Up Fast
+// <i> Indicates whether Wake Up Fast is enabled or not
+// <id> fdpll1_arch_wuf
+#ifndef CONF_FDPLL1_WUF
+#define CONF_FDPLL1_WUF 0
+#endif
+
+// <o> Proportional Integral Filter Selection <0x0-0xF>
+// <id> fdpll1_arch_filter
+#ifndef CONF_FDPLL1_FILTER
+#define CONF_FDPLL1_FILTER 0x0
+#endif
+
+//</h>
+//</e>
+
+// <<< end of configuration section >>>
+
+#endif // HPL_OSCCTRL_CONFIG_H