Tag the LUFA 120730 release.LUFA-120730

git-svn-id: http://lufa-lib.googlecode.com/svn/tags/LUFA-120730@2428 d5102386-fcda-11dd-9fdb-3debd5008f28

6 files changed, 140 insertions, 140 deletions

diff --git a/Projects/SerialToLCD/Doxygen.conf b/Projects/SerialToLCD/Doxygen.conf
index b16a3b8a..a04837b8 100644
--- a/Projects/SerialToLCD/Doxygen.conf
+++ b/Projects/SerialToLCD/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.1
+# Doxyfile 1.8.1.2
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -588,7 +588,7 @@ FILE_VERSION_FILTER    =
 
 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
 # by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. The create the layout file
+# output files in an output format independent way. To create the layout file
 # that represents doxygen's defaults, run doxygen with the -l option.
 # You can optionally specify a file name after the option, if omitted
 # DoxygenLayout.xml will be used as the name of the layout file.
@@ -804,7 +804,7 @@ INLINE_SOURCES         = NO
 
 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
 # doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
+# fragments. Normal C, C++ and Fortran comments will always remain visible.
 
 STRIP_CODE_COMMENTS    = YES
 
@@ -956,9 +956,7 @@ HTML_TIMESTAMP         = NO
 
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
-# page has loaded. For this to work a browser that supports
-# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
-# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
+# page has loaded.
 
 HTML_DYNAMIC_SECTIONS  = YES
 
diff --git a/Projects/SerialToLCD/Lib/HD44780.c b/Projects/SerialToLCD/Lib/HD44780.c
index 7bf989d2..0ffe7c47 100644
--- a/Projects/SerialToLCD/Lib/HD44780.c
+++ b/Projects/SerialToLCD/Lib/HD44780.c
@@ -104,7 +104,7 @@ static void HD44780_PowerUp4Bit(void)
 	_delay_us(50);
 }
 
-void HD44780_Initialise(void)
+void HD44780_Initialize(void)
 {
 	PORTD &= ~ALL_BITS;
 	DDRD  |=  ALL_BITS;
diff --git a/Projects/SerialToLCD/Lib/HD44780.h b/Projects/SerialToLCD/Lib/HD44780.h
index 680e69bc..165e32aa 100644
--- a/Projects/SerialToLCD/Lib/HD44780.h
+++ b/Projects/SerialToLCD/Lib/HD44780.h
@@ -57,7 +57,7 @@
 		#define CMD_DISPLAY_ON      0x0C
 
 	/* Function Prototypes: */
-		void HD44780_Initialise(void);
+		void HD44780_Initialize(void);
 		void HD44780_WriteData(const uint8_t c);
 		void HD44780_WriteCommand(const uint8_t c);
 
diff --git a/Projects/SerialToLCD/SerialToLCD.c b/Projects/SerialToLCD/SerialToLCD.c
index 952e2d4f..b94c5a4a 100644
--- a/Projects/SerialToLCD/SerialToLCD.c
+++ b/Projects/SerialToLCD/SerialToLCD.c
@@ -148,7 +148,7 @@ void SetupHardware(void)
 	USB_Init();
 
 	/* Power up the HD44780 Interface */
-	HD44780_Initialise();
+	HD44780_Initialize();
 	HD44780_WriteCommand(CMD_DISPLAY_ON);
 	
 	/* Start the flush timer so that overflows occur rapidly to push received bytes to the USB interface */
diff --git a/Projects/SerialToLCD/SerialToLCD.txt b/Projects/SerialToLCD/SerialToLCD.txt
index 8058ee52..cb30b6bc 100644
--- a/Projects/SerialToLCD/SerialToLCD.txt
+++ b/Projects/SerialToLCD/SerialToLCD.txt
@@ -1,97 +1,97 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

-

-/** \mainpage Simon Foster's USB Serial to HD44780 LCD Project

- *

- *  \section Sec_Compat Project Compatibility:

- *

- *  The following list indicates what microcontrollers are compatible with this project.

- *

- *  \li AT90USB162

- *

- *  \section Sec_Info USB Information:

- *

- *  The following table gives a rundown of the USB utilization of this project.

- *

- *  <table>

- *   <tr>

- *    <td><b>USB Mode:</b></td>

- *    <td>Device</td>

- *   </tr>

- *   <tr>

- *    <td><b>USB Class:</b></td>

- *    <td>Communications Device Class (CDC)</td>

- *   </tr>

- *   <tr>

- *    <td><b>USB Subclass:</b></td>

- *    <td>Abstract Control Model (ACM)</td>

- *   </tr>

- *   <tr>

- *    <td><b>Relevant Standards:</b></td>

- *    <td>USBIF CDC Class Standard</td>

- *   </tr>

- *   <tr>

- *    <td><b>Supported USB Speeds:</b></td>

- *    <td>Full Speed Mode</td>

- *   </tr>

- *  </table>

- *

- *  \section Sec_Description Project Description:

- *

- *  Firmware for a USB Virtual Serial to HD44780 LCD controller project, by Simon Foster. This

- *  project connects a standard HD7780 compatible LCD controller to a PC via a virtual serial

- *  link, so that data supplied by the host can be written to the display. This project is

- *  designed to use the Minimum USB AVR board, however it can be modified to suit other hardware

- *  if desired.

- *

- *  LCD Datasheet:    http://www.sparkfun.com/datasheets/LCD/HD44780.pdf \n

- *  More Information: http://en.wikipedia.org/wiki/HD44780_Character_LCD \n

- *

- *  Below are the connections between the AVR Minimus board and LCD.

- *

- *  <table>

- *   <tr>

- *    <td><b>AVR Pin:</b></td>

- *    <td><b>HD44780 LCD Pin:</b></td>

- *   </tr>

- *   <tr>

- *    <td>VCC</td>

- *    <td>VCC</td>

- *   </tr>

- *   <tr>

- *    <td>GND</td>

- *    <td>GND</td>

- *   </tr>

- *   <tr>

- *    <td>PD0</td>

- *    <td>DB4</td>

- *   </tr>

- *   <tr>

- *    <td>PD1</td>

- *    <td>DB5</td>

- *   </tr>

- *   <tr>

- *    <td>PD2</td>

- *    <td>DB6</td>

- *   </tr>

- *   <tr>

- *    <td>PD3</td>

- *    <td>DB7</td>

- *   </tr>

- *   <tr>

- *    <td>PD4</td>

- *    <td>/RS</td>

- *   </tr>

- *   <tr>

- *    <td>GND</td>

- *    <td>/RW</td>

- *   </tr>

- *   <tr>

- *    <td>PD7</td>

- *    <td>/E</td>

- *   </tr>

- *  </table>

- */

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Simon Foster's USB Serial to HD44780 LCD Project
+ *
+ *  \section Sec_Compat Project Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this project.
+ *
+ *  \li AT90USB162
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this project.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Communications Device Class (CDC)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Abstract Control Model (ACM)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF CDC Class Standard</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  Firmware for a USB Virtual Serial to HD44780 LCD controller project, by Simon Foster. This
+ *  project connects a standard HD7780 compatible LCD controller to a PC via a virtual serial
+ *  link, so that data supplied by the host can be written to the display. This project is
+ *  designed to use the Minimum USB AVR board, however it can be modified to suit other hardware
+ *  if desired.
+ *
+ *  LCD Datasheet:    http://www.sparkfun.com/datasheets/LCD/HD44780.pdf \n
+ *  More Information: http://en.wikipedia.org/wiki/HD44780_Character_LCD \n
+ *
+ *  Below are the connections between the AVR Minimus board and LCD.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>AVR Pin:</b></td>
+ *    <td><b>HD44780 LCD Pin:</b></td>
+ *   </tr>
+ *   <tr>
+ *    <td>VCC</td>
+ *    <td>VCC</td>
+ *   </tr>
+ *   <tr>
+ *    <td>GND</td>
+ *    <td>GND</td>
+ *   </tr>
+ *   <tr>
+ *    <td>PD0</td>
+ *    <td>DB4</td>
+ *   </tr>
+ *   <tr>
+ *    <td>PD1</td>
+ *    <td>DB5</td>
+ *   </tr>
+ *   <tr>
+ *    <td>PD2</td>
+ *    <td>DB6</td>
+ *   </tr>
+ *   <tr>
+ *    <td>PD3</td>
+ *    <td>DB7</td>
+ *   </tr>
+ *   <tr>
+ *    <td>PD4</td>
+ *    <td>/RS</td>
+ *   </tr>
+ *   <tr>
+ *    <td>GND</td>
+ *    <td>/RW</td>
+ *   </tr>
+ *   <tr>
+ *    <td>PD7</td>
+ *    <td>/E</td>
+ *   </tr>
+ *  </table>
+ */
diff --git a/Projects/SerialToLCD/makefile b/Projects/SerialToLCD/makefile
index dd48194b..02f43daf 100644
--- a/Projects/SerialToLCD/makefile
+++ b/Projects/SerialToLCD/makefile
@@ -1,34 +1,36 @@
-#

-#             LUFA Library

-#     Copyright (C) Dean Camera, 2012.

-#

-#  dean [at] fourwalledcubicle [dot] com

-#           www.lufa-lib.org

-#

-# --------------------------------------

-#         LUFA Project Makefile.

-# --------------------------------------

-

-MCU          = at90usb162

-ARCH         = AVR8

-BOARD        = MINIMUS

-F_CPU        = 16000000

-F_USB        = $(F_CPU)

-OPTIMIZATION = s

-TARGET       = SerialToLCD

-SRC          = $(TARGET).c Descriptors.c Lib/HD44780.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)

-LUFA_PATH    = ../../LUFA/

-C_STANDARD   = gnu99

-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/

-LD_FLAGS     =

-

-# Default target

-all:

-

-# Include LUFA build script makefiles

-include $(LUFA_PATH)/Build/lufa.core.in

-include $(LUFA_PATH)/Build/lufa.sources.in

-include $(LUFA_PATH)/Build/lufa.build.in

-include $(LUFA_PATH)/Build/lufa.doxygen.in

-include $(LUFA_PATH)/Build/lufa.dfu.in

-include $(LUFA_PATH)/Build/lufa.avrdude.in

+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2012.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+MCU          = at90usb162
+ARCH         = AVR8
+BOARD        = MINIMUS
+F_CPU        = 16000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = SerialToLCD
+SRC          = $(TARGET).c Descriptors.c Lib/HD44780.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA build script makefiles
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_dfu.mk
+include $(LUFA_PATH)/Build/lufa_hid.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk